Contract Source Code:
File 1 of 1 : DDPERC721A
/**
██████╗ ██████╗ ███████╗ █████╗ ███╗ ███╗██╗███╗ ██╗
██╔══██╗██╔══██╗██╔════╝██╔══██╗████╗ ████║██║████╗ ██║
██║ ██║██████╔╝█████╗ ███████║██╔████╔██║██║██╔██╗ ██║
██║ ██║██╔══██╗██╔══╝ ██╔══██║██║╚██╔╝██║██║██║╚██╗██║
██████╔╝██║ ██║███████╗██║ ██║██║ ╚═╝ ██║██║██║ ╚████║
╚═════╝ ╚═╝ ╚═╝╚══════╝╚═╝ ╚═╝╚═╝ ╚═╝╚═╝╚═╝ ╚═══╝
██████╗ ██╗██╗ ██╗███████╗██████╗ ███████╗
██╔══██╗██║██║ ██║██╔════╝██╔══██╗██╔════╝
██║ ██║██║██║ ██║█████╗ ██████╔╝███████╗
██║ ██║██║╚██╗ ██╔╝██╔══╝ ██╔══██╗╚════██║
██████╔╝██║ ╚████╔╝ ███████╗██║ ██║███████║
╚═════╝ ╚═╝ ╚═══╝ ╚══════╝╚═╝ ╚═╝╚══════╝
██████╗ ██████╗ ██████╗ ██╗███████╗ ██████╗████████╗
██╔══██╗██╔══██╗██╔═══██╗ ██║██╔════╝██╔════╝╚══██╔══╝
██████╔╝██████╔╝██║ ██║ ██║█████╗ ██║ ██║
██╔═══╝ ██╔══██╗██║ ██║██ ██║██╔══╝ ██║ ██║
██║ ██║ ██║╚██████╔╝╚█████╔╝███████╗╚██████╗ ██║
╚═╝ ╚═╝ ╚═╝ ╚═════╝ ╚════╝ ╚══════╝ ╚═════╝ ╚═╝
*/
//SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: contracts/MerkleProof.sol
pragma solidity ^0.8.7;
abstract contract MerkleProof {
bytes32 internal _merkleRoot;
function _setMerkleRoot(bytes32 merkleRoot_) internal virtual {
_merkleRoot = merkleRoot_;
}
function isWhitelisted(address address_, bytes32[] memory proof_) public view returns (bool) {
bytes32 _leaf = keccak256(abi.encodePacked(address_));
for (uint256 i = 0; i < proof_.length; i++) {
_leaf = _leaf < proof_[i] ? keccak256(abi.encodePacked(_leaf, proof_[i])) : keccak256(abi.encodePacked(proof_[i], _leaf));
}
return _leaf == _merkleRoot;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File: @openzeppelin/contracts/utils/Base64.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Base64.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides a set of functions to operate with Base64 strings.
*
* _Available since v4.5._
*/
library Base64 {
/**
* @dev Base64 Encoding/Decoding Table
*/
string internal constant _TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
/**
* @dev Converts a `bytes` to its Bytes64 `string` representation.
*/
function encode(bytes memory data) internal pure returns (string memory) {
/**
* Inspired by Brecht Devos (Brechtpd) implementation - MIT licence
* https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol
*/
if (data.length == 0) return "";
// Loads the table into memory
string memory table = _TABLE;
// Encoding takes 3 bytes chunks of binary data from `bytes` data parameter
// and split into 4 numbers of 6 bits.
// The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up
// - `data.length + 2` -> Round up
// - `/ 3` -> Number of 3-bytes chunks
// - `4 *` -> 4 characters for each chunk
string memory result = new string(4 * ((data.length + 2) / 3));
/// @solidity memory-safe-assembly
assembly {
// Prepare the lookup table (skip the first "length" byte)
let tablePtr := add(table, 1)
// Prepare result pointer, jump over length
let resultPtr := add(result, 32)
// Run over the input, 3 bytes at a time
for {
let dataPtr := data
let endPtr := add(data, mload(data))
} lt(dataPtr, endPtr) {
} {
// Advance 3 bytes
dataPtr := add(dataPtr, 3)
let input := mload(dataPtr)
// To write each character, shift the 3 bytes (18 bits) chunk
// 4 times in blocks of 6 bits for each character (18, 12, 6, 0)
// and apply logical AND with 0x3F which is the number of
// the previous character in the ASCII table prior to the Base64 Table
// The result is then added to the table to get the character to write,
// and finally write it in the result pointer but with a left shift
// of 256 (1 byte) - 8 (1 ASCII char) = 248 bits
mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
}
// When data `bytes` is not exactly 3 bytes long
// it is padded with `=` characters at the end
switch mod(mload(data), 3)
case 1 {
mstore8(sub(resultPtr, 1), 0x3d)
mstore8(sub(resultPtr, 2), 0x3d)
}
case 2 {
mstore8(sub(resultPtr, 1), 0x3d)
}
}
return result;
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: contracts/erc721a/IERC721A.sol
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of an ERC721A compliant contract.
*/
interface IERC721A is IERC721, IERC721Metadata {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* The caller cannot approve to the current owner.
*/
error ApprovalToCurrentOwner();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
/**
* @dev Returns the total amount of tokens stored by the contract.
*
* Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
*/
function totalSupply() external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/interfaces/IERC2981.sol
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// File: @openzeppelin/contracts/token/common/ERC2981.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
*
* Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
* specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
*
* Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
* fee is specified in basis points by default.
*
* IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
* https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
* voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
*
* _Available since v4.5._
*/
abstract contract ERC2981 is IERC2981, ERC165 {
struct RoyaltyInfo {
address receiver;
uint96 royaltyFraction;
}
RoyaltyInfo private _defaultRoyaltyInfo;
mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @inheritdoc IERC2981
*/
function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {
RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];
if (royalty.receiver == address(0)) {
royalty = _defaultRoyaltyInfo;
}
uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();
return (royalty.receiver, royaltyAmount);
}
/**
* @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
* fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
* override.
*/
function _feeDenominator() internal pure virtual returns (uint96) {
return 10000;
}
/**
* @dev Sets the royalty information that all ids in this contract will default to.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: invalid receiver");
_defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Removes default royalty information.
*/
function _deleteDefaultRoyalty() internal virtual {
delete _defaultRoyaltyInfo;
}
/**
* @dev Sets the royalty information for a specific token id, overriding the global default.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setTokenRoyalty(
uint256 tokenId,
address receiver,
uint96 feeNumerator
) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: Invalid parameters");
_tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Resets royalty information for the token id back to the global default.
*/
function _resetTokenRoyalty(uint256 tokenId) internal virtual {
delete _tokenRoyaltyInfo[tokenId];
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: contracts/erc721a/ERC721A.sol
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721A {
using Address for address;
using Strings for uint256;
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr) if (curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner) if(!isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract()) if(!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex && !_ownerships[tokenId].burned;
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex < end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = to;
currSlot.startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
address from = prevOwnership.addr;
if (approvalCheck) {
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
AddressData storage addressData = _addressData[from];
addressData.balance -= 1;
addressData.numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = from;
currSlot.startTimestamp = uint64(block.timestamp);
currSlot.burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: contracts/DDPERC721A.sol
pragma solidity ^0.8.7;
contract DDPERC721A is Ownable, ERC721A, ReentrancyGuard, MerkleProof, ERC2981{
//Project Settings
uint256 public wlMintPrice;//wl.price.
uint256 public psMintPrice;//publicSale. price.
uint256 public maxMintsPerWL;//wl.max mint num per wallet.
uint256 public maxMintsPerPS;//publicSale.max mint num per wallet.
uint256 public maxSupply;//max supply
address payable internal _withdrawWallet;//withdraw wallet
//URI
string internal _revealUri;
string public _baseExtension = ".json";
string internal _baseTokenURI;
//flags
bool public isWlEnabled;//WL enable.
bool public isPsEnabled;//PublicSale enable.
bool internal _isRevealed;//reveal enable.
//mint records.
mapping(address => uint256) internal _wlMinted;//wl.mint num by wallet.
mapping(address => uint256) internal _psMinted;//PublicSale.mint num by wallet.
constructor (
string memory _name,
string memory _symbol
) ERC721A (_name,_symbol) {
}
//start from 1.djust for bueno.
function _startTokenId() internal view virtual override returns (uint256) {
return 1;
}
//set Default Royalty._feeNumerator 500 = 5% Royalty
function setDefaultRoyalty(address _receiver, uint96 _feeNumerator) external virtual onlyOwner {
_setDefaultRoyalty(_receiver, _feeNumerator);
}
//for ERC2981
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A, ERC2981) returns (bool) {
return super.supportsInterface(interfaceId);
}
//for ERC2981 Opensea
function contractURI() external view virtual returns (string memory) {
return _formatContractURI();
}
//make contractURI
function _formatContractURI() internal view returns (string memory) {
(address receiver, uint256 royaltyFraction) = royaltyInfo(0,_feeDenominator());//tokenid=0
return string(
abi.encodePacked(
"data:application/json;base64,",
Base64.encode(
bytes(
abi.encodePacked(
'{"seller_fee_basis_points":', Strings.toString(royaltyFraction),
', "fee_recipient":"', Strings.toHexString(uint256(uint160(receiver)), 20), '"}'
)
)
)
)
);
}
//set owner's wallet.withdraw to this wallet.only owner.
function setWithdrawWallet(address _owner) external virtual onlyOwner {
_withdrawWallet = payable(_owner);
}
//set maxSupply.only owner.
function setMaxSupply(uint256 _maxSupply) external virtual onlyOwner {
require(totalSupply() <= _maxSupply, "Lower than _currentIndex.");
maxSupply = _maxSupply;
}
//set wl price.only owner.
function setWlPrice(uint256 newPrice) external virtual onlyOwner {
wlMintPrice = newPrice;
}
//set public Sale price.only owner.
function setPsPrice(uint256 newPrice) external virtual onlyOwner {
psMintPrice = newPrice;
}
//set reveal.only owner.
function setReveal(bool bool_) external virtual onlyOwner {
_isRevealed = bool_;
}
//retuen _isRevealed.
function isRevealed() external view virtual returns (bool){
return _isRevealed;
}
//retuen _wlMinted
function wlMinted(address _address) external view virtual returns (uint256){
return _wlMinted[_address];
}
//retuen _psMinted
function psMinted(address _address) external view virtual returns (uint256){
return _psMinted[_address];
}
//set wl's max mint num.only owner.
function setWlMaxMints(uint256 _max) external virtual onlyOwner {
maxMintsPerWL = _max;
}
//set PublicSale's max mint num.only owner.
function setPsMaxMints(uint256 _max) external virtual onlyOwner {
maxMintsPerPS = _max;
}
//set WLsale.only owner.
function setWhitelistSale(bool bool_) external virtual onlyOwner {
isWlEnabled = bool_;
}
//set Publicsale.only owner.
function setPublicSale(bool bool_) external virtual onlyOwner {
isPsEnabled = bool_;
}
//set MerkleRoot.only owner.
function setMerkleRoot(bytes32 merkleRoot_) external virtual onlyOwner {
_setMerkleRoot(merkleRoot_);
}
//set HiddenBaseURI.only owner.
function setHiddenBaseURI(string memory uri_) external virtual onlyOwner {
_revealUri = uri_;
}
//return _currentIndex
function getCurrentIndex() external view virtual returns (uint256){
return _currentIndex;
}
//set BaseURI at after reveal. only owner.
function setBaseURI(string memory uri_) external virtual onlyOwner {
_baseTokenURI = uri_;
}
function setBaseExtension(string memory _newBaseExtension) external onlyOwner
{
_baseExtension = _newBaseExtension;
}
//retuen BaseURI.internal.
function _currentBaseURI() internal view returns (string memory){
return _baseTokenURI;
}
function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {
require(_exists(_tokenId), "URI query for nonexistent token");
if(_isRevealed == false) {
return _revealUri;
}
return string(abi.encodePacked(_currentBaseURI(), Strings.toString(_tokenId), _baseExtension));
}
//owner mint.transfer to _address.only owner.
function ownerMint(uint256 _amount, address _address) external virtual onlyOwner {
require((_amount + totalSupply()) <= (maxSupply), "No more NFTs");
_safeMint(_address, _amount);
}
//WL mint.
function whitelistMint(uint256 _amount, bytes32[] memory proof_) external payable virtual nonReentrant {
require(isWlEnabled, "whitelistMint is Paused");
require(isWhitelisted(msg.sender, proof_), "You are not whitelisted!");
require(maxMintsPerWL >= _amount, "whitelistMint: Over max mints per wallet");
require(maxMintsPerWL >= _wlMinted[msg.sender] + _amount, "You have no whitelistMint left");
require(msg.value == wlMintPrice * _amount, "ETH value is not correct");
require((_amount + totalSupply()) <= (maxSupply), "No more NFTs");
_wlMinted[msg.sender] += _amount;
_safeMint(msg.sender, _amount);
}
//Public mint.
function publicMint(uint256 _amount) external payable virtual nonReentrant {
require(isPsEnabled, "publicMint is Paused");
require(maxMintsPerPS >= _amount, "publicMint: Over max mints per wallet");
require(maxMintsPerPS >= _psMinted[msg.sender] + _amount, "You have no publicMint left");
require(msg.value == psMintPrice * _amount, "ETH value is not correct");
require((_amount + totalSupply()) <= (maxSupply), "No more NFTs");
_psMinted[msg.sender] += _amount;
_safeMint(msg.sender, _amount);
}
//burn
function burn(uint256 tokenId) external virtual {
_burn(tokenId, true);
}
//widraw ETH from this contract.only owner.
function withdraw() external payable virtual onlyOwner nonReentrant{
// This will payout the owner 100% of the contract balance.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
bool os;
if(_withdrawWallet != address(0)){//if _withdrawWallet has.
(os, ) = payable(_withdrawWallet).call{value: address(this).balance}("");
}else{
(os, ) = payable(owner()).call{value: address(this).balance}("");
}
require(os);
// =============================================================================
}
//return wallet owned tokenids.
function walletOfOwner(address _address) external view virtual returns (uint256[] memory) {
uint256 ownerTokenCount = balanceOf(_address);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
//search from all tonkenid. so spend high gas values.attention.
uint256 tokenindex = 0;
for (uint256 i = _startTokenId(); i < _currentIndex; i++) {
if(_address == this.tryOwnerOf(i)) tokenIds[tokenindex++] = i;
}
return tokenIds;
}
//try catch vaersion ownerOf. I have a error at burned tokenid.so need to try catch. only external.
function tryOwnerOf(uint256 tokenId) external view virtual returns (address) {
try this.ownerOf(tokenId) returns (address _address) {
return(_address);
} catch {
return (address(0));//return 0x0 if error.
}
}
}