Contract Name:
HotDougsMinter
Contract Source Code:
File 1 of 1 : HotDougsMinter
// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;
// Creator: Chiru Labs
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*
* Assumes that an owner cannot have more than the 2**128 - 1 (max value of uint128) of supply
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 internal currentIndex;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
override
returns (uint256)
{
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx;
address currOwnershipAddr;
// Counter overflow is impossible as the loop breaks when uint256 i is equal to another uint256 numMintedSoFar.
unchecked {
for (uint256 i; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
}
revert("ERC721A: unable to get token of owner by index");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(
owner != address(0),
"ERC721A: balance query for the zero address"
);
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
require(_exists(tokenId), "ERC721A: owner query for nonexistent token");
unchecked {
for (uint256 curr = tokenId; curr >= 0; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length != 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
override
returns (address)
{
require(
_exists(tokenId),
"ERC721A: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
override
{
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity, _data, true);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(
address to,
uint256 quantity,
bytes memory _data,
bool safe
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
require(quantity != 0, "ERC721A: quantity must be greater than 0");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 3.4e38 (2**128) - 1
// updatedIndex overflows if currentIndex + quantity > 1.56e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint128(quantity);
_addressData[to].numberMinted += uint128(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
for (uint256 i; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
if (safe) {
require(
_checkOnERC721Received(
address(0),
to,
updatedIndex,
_data
),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
updatedIndex++;
}
currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId].addr = to;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership
.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721A: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*
* WARNING: You should avoid using leaf values that are 64 bytes long prior to
* hashing, or use a hash function other than keccak256 for hashing leaves.
* This is because the concatenation of a sorted pair of internal nodes in
* the merkle tree could be reinterpreted as a leaf value.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
/// @title Hot Dougs
contract HotDougs is Ownable, ReentrancyGuard, ERC721A("Hot Dougs", "DOUGS") {
using Strings for uint256;
using MerkleProof for bytes32[];
/// @notice Max total supply.
uint256 public dougsMax = 6969;
/// @notice Max transaction amount.
uint256 public constant dougsPerTx = 10;
/// @notice Max Dougs per wallet in pre-sale
uint256 public constant dougsMintPerWalletPresale = 3;
/// @notice Total Dougs available in pre-sale
uint256 public constant maxPreSaleDougs = 3000;
/// @notice Dougs price.
uint256 public constant dougsPrice = 0.05 ether;
/// @notice 0 = closed, 1 = pre-sale, 2 = public
uint256 public saleState;
/// @notice Metadata baseURI.
string public baseURI;
/// @notice Metadata unrevealed uri.
string public unrevealedURI;
/// @notice Metadata baseURI extension.
string public baseExtension;
/// @notice OpenSea proxy registry.
address public opensea = 0xa5409ec958C83C3f309868babACA7c86DCB077c1;
/// @notice LooksRare marketplace transfer manager.
address public looksrare = 0xf42aa99F011A1fA7CDA90E5E98b277E306BcA83e;
/// @notice Check if marketplaces pre-approve is enabled.
bool public marketplacesApproved = true;
/// @notice Free mint merkle root.
bytes32 public freeMintRoot;
/// @notice Pre-sale merkle root.
bytes32 public preMintRoot;
/// @notice Amount minted by address on free mint.
mapping(address => uint256) public freeMintCount;
/// @notice Amount minted by address on pre access.
mapping(address => uint256) public preMintCount;
/// @notice Authorized callers mapping.
mapping(address => bool) public auth;
modifier canMintDougs(uint256 numberOfTokens) {
require(
totalSupply() + numberOfTokens <= dougsMax,
"Not enough Dougs remaining to mint"
);
_;
}
modifier preSaleActive() {
require(saleState == 1, "Pre sale is not open");
_;
}
modifier publicSaleActive() {
require(saleState == 2, "Public sale is not open");
_;
}
modifier isValidMerkleProof(bytes32[] calldata merkleProof, bytes32 root) {
require(
MerkleProof.verify(
merkleProof,
root,
keccak256(abi.encodePacked(msg.sender))
),
"Address does not exist in list"
);
_;
}
modifier isCorrectPayment(uint256 price, uint256 numberOfTokens) {
require(
price * numberOfTokens == msg.value,
"Incorrect ETH value sent"
);
_;
}
modifier maxDougsPerTransaction(uint256 numberOfTokens) {
require(
numberOfTokens <= dougsPerTx,
"Max Dougs to mint per transaction is 10"
);
_;
}
constructor(string memory newUnrevealedURI) {
unrevealedURI = newUnrevealedURI;
}
/// @notice Mint one free token and up to 3 pre-sale tokens.
function mintFree(uint256 numberOfTokens, bytes32[] calldata merkleProof)
external
payable
nonReentrant
preSaleActive
isCorrectPayment(dougsPrice, numberOfTokens - 1)
isValidMerkleProof(merkleProof, freeMintRoot)
{
if (msg.sender != owner()) {
require(
freeMintCount[msg.sender] == 0,
"User already minted a free token"
);
uint256 numAlreadyMinted = preMintCount[msg.sender];
require(
numAlreadyMinted + numberOfTokens - 1 <=
dougsMintPerWalletPresale,
"Max Dougs to mint in pre-sale is three"
);
require(
totalSupply() + numberOfTokens <= maxPreSaleDougs,
"Not enough Dougs remaining in pre-sale"
);
preMintCount[msg.sender] = numAlreadyMinted + numberOfTokens;
freeMintCount[msg.sender]++;
}
_safeMint(msg.sender, numberOfTokens);
}
/// @notice Mint one or more tokens for address on pre-sale list.
function mintPreDoug(uint256 numberOfTokens, bytes32[] calldata merkleProof)
external
payable
nonReentrant
preSaleActive
isCorrectPayment(dougsPrice, numberOfTokens)
isValidMerkleProof(merkleProof, preMintRoot)
{
uint256 numAlreadyMinted = preMintCount[msg.sender];
require(
numAlreadyMinted + numberOfTokens <= dougsMintPerWalletPresale,
"Max Dougs to mint in pre-sale is three"
);
require(
totalSupply() + numberOfTokens <= maxPreSaleDougs,
"Not enough Dougs remaining in pre-sale"
);
preMintCount[msg.sender] += numberOfTokens;
_safeMint(msg.sender, numberOfTokens);
}
/// @notice Mint one or more tokens.
function mintDoug(uint256 numberOfTokens)
external
payable
nonReentrant
publicSaleActive
isCorrectPayment(dougsPrice, numberOfTokens)
canMintDougs(numberOfTokens)
maxDougsPerTransaction(numberOfTokens)
{
_safeMint(msg.sender, numberOfTokens);
}
/// @notice Allow contract owner to mint tokens.
function ownerMint(uint256 numberOfTokens)
external
onlyOwner
canMintDougs(numberOfTokens)
{
_safeMint(msg.sender, numberOfTokens);
}
/// @notice See {IERC721-tokenURI}.
function tokenURI(uint256 tokenId)
public
view
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (bytes(unrevealedURI).length > 0) return unrevealedURI;
return
string(
abi.encodePacked(baseURI, tokenId.toString(), baseExtension)
);
}
/// @notice Set baseURI to `newBaseURI`, baseExtension to `newBaseExtension` and deletes unrevealedURI, triggering a reveal.
function setBaseURI(
string memory newBaseURI,
string memory newBaseExtension
) external onlyOwner {
baseURI = newBaseURI;
baseExtension = newBaseExtension;
delete unrevealedURI;
}
/// @notice Set unrevealedURI to `newUnrevealedURI`.
function setUnrevealedURI(string memory newUnrevealedURI)
external
onlyOwner
{
unrevealedURI = newUnrevealedURI;
}
/// @notice Set sale state. 0 = closed 1 = pre-sale 2 = public.
function setSaleState(uint256 newSaleState) external onlyOwner {
saleState = newSaleState;
}
/// @notice Set freeMintRoot to `newMerkleRoot`.
function setFreeMintRoot(bytes32 newMerkleRoot) external onlyOwner {
freeMintRoot = newMerkleRoot;
}
/// @notice Set preMintRoot to `newMerkleRoot`.
function setPreMintRoot(bytes32 newMerkleRoot) external onlyOwner {
preMintRoot = newMerkleRoot;
}
/// @notice Update Total Supply
function setMaxDougs(uint256 _supply) external onlyOwner {
dougsMax = _supply;
}
/// @notice Toggle marketplaces pre-approve feature.
function toggleMarketplacesApproved() external onlyOwner {
marketplacesApproved = !marketplacesApproved;
}
/// @notice Withdraw balance to Owner
function withdrawMoney() external onlyOwner nonReentrant {
(bool success, ) = msg.sender.call{value: address(this).balance}("");
require(success, "Transfer failed.");
}
/// @notice See {ERC721-isApprovedForAll}.
function isApprovedForAll(address owner, address operator)
public
view
override
returns (bool)
{
if (!marketplacesApproved)
return auth[operator] || super.isApprovedForAll(owner, operator);
return
auth[operator] ||
operator == address(ProxyRegistry(opensea).proxies(owner)) ||
operator == looksrare ||
super.isApprovedForAll(owner, operator);
}
}
contract OwnableDelegateProxy {}
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
}
/**
* @dev ERC-721 interface for accepting safe transfers.
* See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md.
*/
interface ERC721TokenReceiver {
/**
* @notice The contract address is always the message sender. A wallet/broker/auction application
* MUST implement the wallet interface if it will accept safe transfers.
* @dev Handle the receipt of a NFT. The ERC721 smart contract calls this function on the
* recipient after a `transfer`. This function MAY throw to revert and reject the transfer. Return
* of other than the magic value MUST result in the transaction being reverted.
* Returns `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))` unless throwing.
* @param _operator The address which called `safeTransferFrom` function.
* @param _from The address which previously owned the token.
* @param _tokenId The NFT identifier which is being transferred.
* @param _data Additional data with no specified format.
* @return Returns `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`.
*/
function onERC721Received(
address _operator,
address _from,
uint256 _tokenId,
bytes calldata _data
) external returns (bytes4);
}
contract HotDougsMinter is Ownable, ReentrancyGuard, ERC721TokenReceiver {
event Received();
// mapping from dougTokenId to claim status. 0 = available, 1 = claimed
mapping(uint256 => uint256) public claimedDougs;
/// @notice Max Dougs per transaction
uint256 public constant paidDougsPerTx = 10;
/// @notice price of Hot Dougs minted through Minter contract
uint256 public hotDougPrice = .025 ether;
/// @notice original HotDougs Contract Address
address public dougContractAddress;
/// @notice 0 = closed, 1 = pre-sale, 2 = public
uint256 public saleState;
/// @notice Update newDougPrice
function setNewDougPrice(uint256 newDougPrice) external onlyOwner {
hotDougPrice = newDougPrice;
}
/// @notice Max total supply.
uint256 public maxHotDougs = 6969;
/// @notice only allow free dougs until a specified tokenId
uint256 public lastFreeHotDougTokenId;
modifier maxDougsPerTransaction(uint256 numberOfTokens) {
require(
numberOfTokens <= paidDougsPerTx,
"Max Dougs per transaction is 10"
);
_;
}
modifier publicSaleActive() {
require(saleState == 2, "Public sale is not open");
_;
}
modifier canMintDougs(uint256 numberOfTokens) {
require(
dougTotalSupply() + numberOfTokens <= maxHotDougs,
"Not enough Dougs left"
);
_;
}
modifier isCorrectPayment(uint256 price, uint256 numberOfTokens) {
require(
price * numberOfTokens == msg.value,
"Incorrect ETH value sent"
);
_;
}
function dougTotalSupply() public view returns (uint256) {
HotDougs _hotDougs = HotDougs(dougContractAddress);
return _hotDougs.totalSupply();
}
function setDougContractAddress(address originalHotDougAddress)
external
onlyOwner
{
dougContractAddress = originalHotDougAddress;
}
/// ----- Mint Doug Utils -----
/// @notice gets TokenIds for Dougs an address owns
function _getTokenIds(address _owner)
internal
view
returns (uint256[] memory)
{
HotDougs _hotDougs = HotDougs(dougContractAddress);
uint256 tokenBalance = _hotDougs.balanceOf(_owner);
require(tokenBalance > 1, "No Tokens! per _getTokenIds");
uint256[] memory _tokensOfOwner = new uint256[](tokenBalance);
for (uint256 i = 0; i < tokenBalance; i++) {
_tokensOfOwner[i] = _hotDougs.tokenOfOwnerByIndex(_owner, i);
}
return (_tokensOfOwner);
}
/// @notice Get the free dougs eligible by an address
function getFreeDougArray(address _address)
external
view
returns (uint256[] memory)
{
uint256[] memory addressTokenIds = _getTokenIds(_address);
uint256 length = addressTokenIds.length;
uint256[] memory claimableDougs = new uint256[](length);
uint256 j = 0;
for (uint256 i = 0; i < length; i++) {
// check if the token is claimable for a free Doug
if (
claimedDougs[addressTokenIds[i]] == 0 &&
addressTokenIds[i] <= lastFreeHotDougTokenId
) {
// if it is claimable add to the claimable array
claimableDougs[j] = addressTokenIds[i];
j++;
} else {
// remove ineligible Dougs from the claimable array
assembly {
mstore(claimableDougs, sub(mload(claimableDougs), 1))
}
}
}
return claimableDougs;
}
/// @notice check if an address has any Dougs that are claim eligible
function checkForFreeDougs(address _address) public view returns (bool) {
HotDougs _hotDougs = HotDougs(dougContractAddress);
uint256 tokenBalance = _hotDougs.balanceOf(_address);
bool claimableDougs;
if (tokenBalance < 1) {
claimableDougs = false;
} else {
uint256[] memory addressTokenIds = _getTokenIds(_address);
uint256 length = addressTokenIds.length;
for (uint256 i = 0; i < length; i++) {
// check if the token is claimable for a free Doug
if (
claimedDougs[addressTokenIds[i]] == 0 &&
addressTokenIds[i] <= lastFreeHotDougTokenId
) {
// if it is claimable return true if not, keep going to see if any are claimable.
claimableDougs = true;
// leave the loop if any tokens are claimable
break;
} else {
claimableDougs = false;
}
}
}
return claimableDougs;
}
function _mintAndTransferDoug(uint256 _numberOfTokens)
internal
canMintDougs(_numberOfTokens)
{
HotDougs _hotDougs = HotDougs(dougContractAddress);
// get the current number of minted Dougs
uint256 currentTotal = _hotDougs.totalSupply();
// mint the token(s) to this contract
_hotDougs.ownerMint(_numberOfTokens);
// transfer the newly minted Dougs to the minter
for (
uint256 i = currentTotal;
i <= _numberOfTokens + currentTotal - 1;
i++
) {
_hotDougs.transferFrom(address(this), tx.origin, i);
}
}
/// @notice only used in case a token gets "stuck" in the minting contract
function manualTransferContractOwnedDoug(address _to, uint256 _tokenId)
external
onlyOwner
{
HotDougs _hotDougs = HotDougs(dougContractAddress);
_hotDougs.transferFrom(address(this), _to, _tokenId);
}
function onERC721Received(
address _operator,
address _from,
uint256 _tokenId,
bytes calldata _data
) external override returns (bytes4) {
_operator;
_from;
_tokenId;
_data;
emit Received();
return 0x150b7a02;
}
/// @notice Set original Hot Doug contract sale state
function setHotDougSaleState(uint256 newSaleState) external onlyOwner {
HotDougs _hotDougs = HotDougs(dougContractAddress);
_hotDougs.setSaleState(newSaleState);
}
/// @notice Set original Hot Doug BaseURI
function setHotDougBaseURI(
string memory newBaseURI,
string memory newBaseExtension
) external onlyOwner {
HotDougs _hotDougs = HotDougs(dougContractAddress);
_hotDougs.setBaseURI(newBaseURI, newBaseExtension);
}
/// @notice Set max Dougs on original Hot Dougs contract
function setHotDougMaxDougs(uint256 newMaxDougs) external onlyOwner {
HotDougs _hotDougs = HotDougs(dougContractAddress);
_hotDougs.setMaxDougs(newMaxDougs);
}
/// @notice Set max Dougs on Hot Dougs Minter contract
function setHotDougMinterMaxDougs(uint256 newMaxDougs) external onlyOwner {
maxHotDougs = newMaxDougs;
}
/// @notice Set sale state. 0 = closed 1 = pre-sale 2 = public.
function setSaleState(uint256 newSaleState) external onlyOwner {
saleState = newSaleState;
}
/// @notice allow the owner to update the maximum tokenId redeemable for a free Doug
function setLastFreeHotDougTokenId(uint256 _tokenId) external onlyOwner {
lastFreeHotDougTokenId = _tokenId;
}
/// --- Money Moves ---
/// @notice moves money from original Hot Dougs contract to Minter contract
function withdrawToMinterContract() external onlyOwner {
HotDougs _hotDougs = HotDougs(dougContractAddress);
_hotDougs.withdrawMoney();
}
/// @notice moves money to owner of this contract
function withdrawToOwner() external onlyOwner {
(bool success, ) = payable(owner()).call{value: address(this).balance}(
""
);
require(success, "TRANSFER_FAILED");
}
/// ---- Functions to Mint ----
/// @notice Mint a Doug
function mintDougs(uint256 numberToMint)
external
payable
publicSaleActive
isCorrectPayment(hotDougPrice, numberToMint)
canMintDougs(numberToMint)
maxDougsPerTransaction(numberToMint)
nonReentrant
{
_mintAndTransferDoug(numberToMint);
}
/// @notice send a free doug per tokenId to the transaction originator
function sendFreeDougs(uint256[] memory freeDougArray) external {
HotDougs _hotDougs = HotDougs(dougContractAddress);
require(freeDougArray.length > 0);
uint256[] memory addressTokenIds = freeDougArray;
uint256 length = addressTokenIds.length;
require(
dougTotalSupply() + length <= maxHotDougs,
"Not enough Dougs left"
);
// only allow claiming of up to 10 free Dougs at a time
for (uint256 i = 0; i < length && i < 10; i++) {
if (
claimedDougs[addressTokenIds[i]] == 0 &&
addressTokenIds[i] <= lastFreeHotDougTokenId &&
_hotDougs.ownerOf(addressTokenIds[i]) == tx.origin
) {
// add tokenId to list of claimedDougs
claimedDougs[addressTokenIds[i]] = 1;
// mint Doug and transfer to the tx.origin
_mintAndTransferDoug(1);
}
}
}
/// @notice allow the owner of this contract to mint
function ownerMint(uint256 numberOfTokens)
external
onlyOwner
canMintDougs(numberOfTokens)
{
_mintAndTransferDoug(numberOfTokens);
}
/// @notice Transfer the original Hot Doug contract ownership
function transferHotDougOwnership(address newOwner) external onlyOwner {
HotDougs _hotDougs = HotDougs(dougContractAddress);
_hotDougs.transferOwnership(newOwner);
}
/// ###### USED WITH DEBUGGING #######
function getBalance() public view returns (uint256) {
return address(this).balance;
}
receive() external payable {}
}