Contract Source Code:
pragma solidity 0.6.4;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
pragma solidity 0.6.4;
interface HEX {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);//from address(0) for minting
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
function stakeStart(uint256 newStakedHearts, uint256 newStakedDays) external;
function stakeEnd(uint256 stakeIndex, uint40 stakeIdParam) external;
function stakeCount(address stakerAddr) external view returns (uint256);
function stakeLists(address owner, uint256 stakeIndex) external view returns (uint40, uint72, uint72, uint16, uint16, uint16, bool);
function currentDay() external view returns (uint256);
function dailyDataRange(uint256 beginDay, uint256 endDay) external view returns (uint256[] memory);
function globalInfo() external view returns (uint256[13] memory);
}
//HEXMONEY.sol
//
//
pragma solidity 0.6.4;
import "./SafeMath.sol";
import "./IERC20.sol";
import "./HEX.sol";
import "./Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
//Uniswap v2 interface
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
}
////////////////////////////////////////////////
////////////////////EVENTS/////////////////////
//////////////////////////////////////////////
contract TokenEvents {
//when a user freezes tokens
event TokenFreeze(
address indexed user,
uint value
);
//when a user unfreezes tokens
event TokenUnfreeze(
address indexed user,
uint value
);
//when a user freezes freely minted tokens
event FreeMintFreeze(
address indexed user,
uint value,
uint indexed dapp //0 for ref, increment per external dapp
);
//when a user unfreezes freely minted tokens
event FreeMintUnfreeze(
address indexed user,
uint value
);
//when a user transforms HEX to HXY
event Transform (
uint hexAmt,
uint hxyAmt,
address indexed transformer
);
//when founder tokens are frozen
event FounderLock (
uint hxyAmt,
uint timestamp
);
//when founder tokens are unfrozen
event FounderUnlock (
uint hxyAmt,
uint timestamp
);
event LiquidityPush(
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
event DividendPush(
uint256 hexDivs
);
}
//////////////////////////////////////
//////////HEXMONEY TOKEN CONTRACT////////
////////////////////////////////////
contract HEXMONEY is IERC20, TokenEvents {
using SafeMath for uint256;
using SafeERC20 for HEXMONEY;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
//uniswap setup
address public factoryAddress = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f;
address public routerAddress = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address public uniHEXHXY = address(0);
IUniswapV2Pair internal uniPairInterface = IUniswapV2Pair(uniHEXHXY);
IUniswapV2Router02 internal uniV2Router = IUniswapV2Router02(routerAddress);
//hex contract setup
address internal hexAddress = 0x2b591e99afE9f32eAA6214f7B7629768c40Eeb39;
HEX internal hexInterface = HEX(hexAddress);
//transform setup
bool public roomActive;
uint public totalHeartsTransformed = 0;
uint public totalHxyTransformed = 0;
uint public totalDividends = 0;
uint public totalLiquidityAdded = 0;
uint public hexLiquidity = 0;
uint public hexDivs = 0;
//mint / freeze setup
uint public unlockLvl = 0;
uint public founderLockStartTimestamp = 0;
uint public founderLockDayLength = 1825;//5 years (10% released every sixmonths)
uint public founderLockedTokens = 0;
uint private allFounderLocked = 0;
bool public mintBlock;//disables any more tokens ever being minted once _totalSupply reaches _maxSupply
uint public minFreezeDayLength = 7; // min days to freeze
uint internal daySeconds = 86400; // seconds in a day
uint public totalFrozen = 0;
mapping (address => uint) public tokenFrozenBalances;//balance of HXY frozen mapped by user
uint public totalFreeMintFrozen = 0;
mapping (address => uint) public freeMintFrozenBalances;//balance of HXY free minted frozen mapped by user
//tokenomics
uint256 public _maxSupply = 6000000000000000;// max supply @ 60M
uint256 internal _totalSupply;
string public constant name = "HEX Money";
string public constant symbol = "HXY";
uint public constant decimals = 8;
//airdrop contract
address payable public airdropContract = address(0);
//multisig
address public multisig = address(0);
//admin
address payable internal _p1 = 0xb9F8e9dad5D985dF35036C61B6Aded2ad08bd53f;
address payable internal _p2 = 0xe551072153c02fa33d4903CAb0435Fb86F1a80cb;
address payable internal _p3 = 0xc5f517D341c1bcb2cdC004e519AF6C4613A8AB2d;
address payable internal _p4 = 0x47705B509A4Fe6a0237c975F81030DAC5898Dc06;
address payable internal _p5 = 0x31101541339B4B3864E728BbBFc1b8A0b3BCAa45;
bool private sync;
bool public multisigSet;
bool public transformsActive;
//minters
address[] public minterAddresses;// future contracts to enable minting of HXY
mapping(address => bool) admins;
mapping(address => bool) minters;
mapping (address => Frozen) public frozen;
mapping (address => FreeMintFrozen) public freeMintFrozen;
struct Frozen{
uint256 freezeStartTimestamp;
uint256 totalEarnedInterest;
}
struct FreeMintFrozen{
uint256 totalHxyMinted;
}
modifier onlyMultisig(){
require(msg.sender == multisig, "not authorized");
_;
}
modifier onlyAdmins(){
require(admins[msg.sender], "not an admin");
_;
}
modifier onlyMinters(){
require(minters[msg.sender], "not a minter");
_;
}
modifier onlyOnceMultisig(){
require(!multisigSet, "cannot call twice");
multisigSet = true;
_;
}
modifier onlyOnceTransform(){
require(!transformsActive, "cannot call twice");
transformsActive = true;
_;
}
//protects against potential reentrancy
modifier synchronized {
require(!sync, "Sync lock");
sync = true;
_;
sync = false;
}
constructor(uint256 v2Supply) public {
admins[_p1] = true;
admins[_p2] = true;
admins[_p3] = true;
admins[msg.sender] = true;
//mint initial tokens
mintInitialTokens(v2Supply);
}
receive() external payable{
donate();
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply unless mintBLock is true
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
uint256 amt = amount;
require(account != address(0), "ERC20: mint to the zero address");
if(!mintBlock){
if(_totalSupply < _maxSupply){
if(_totalSupply.add(amt) > _maxSupply){
amt = _maxSupply.sub(_totalSupply);
_totalSupply = _maxSupply;
mintBlock = true;
}
else{
_totalSupply = _totalSupply.add(amt);
}
_balances[account] = _balances[account].add(amt);
emit Transfer(address(0), account, amt);
}
}
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, msg.sender, _allowances[account][msg.sender].sub(amount, "ERC20: burn amount exceeds allowance"));
}
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);//from address(0) for minting
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
//mint HXY lock (only ever called in constructor)
function mintInitialTokens(uint v2Supply)
internal
synchronized
{
require(v2Supply <= _maxSupply, "cannot mint");
uint256 _founderLockedTokens = _maxSupply.div(10);
_mint(_p1, v2Supply.sub(_founderLockedTokens));//mint HXY to airdrop on launch
_mint(address(this), _founderLockedTokens);//mint HXY to be frozen for 10 years, 10% unfrozen every year
founderLock(_founderLockedTokens);
}
function founderLock(uint tokens)
internal
{
founderLockStartTimestamp = now;
founderLockedTokens = tokens;
allFounderLocked = tokens;
emit FounderLock(tokens, founderLockStartTimestamp);
}
//unlock founder tokens
function unlock()
public
onlyAdmins
synchronized
{
uint sixMonths = founderLockDayLength/10;
require(unlockLvl < 10, "token unlock complete");
require(founderLockStartTimestamp.add(sixMonths.mul(daySeconds)) <= now, "tokens cannot be unfrozen yet");//must be at least over 6 months
uint value = allFounderLocked/10;
if(founderLockStartTimestamp.add((sixMonths).mul(daySeconds)) <= now && unlockLvl == 0){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 2).mul(daySeconds)) <= now && unlockLvl == 1){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 3).mul(daySeconds)) <= now && unlockLvl == 2){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 4).mul(daySeconds)) <= now && unlockLvl == 3){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 5).mul(daySeconds)) <= now && unlockLvl == 4){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 6).mul(daySeconds)) <= now && unlockLvl == 5){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 7).mul(daySeconds)) <= now && unlockLvl == 6){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 8).mul(daySeconds)) <= now && unlockLvl == 7)
{
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 9).mul(daySeconds)) <= now && unlockLvl == 8){
unlockLvl++;
founderLockedTokens = founderLockedTokens.sub(value);
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else if(founderLockStartTimestamp.add((sixMonths * 10).mul(daySeconds)) <= now && unlockLvl == 9){
unlockLvl++;
if(founderLockedTokens >= value){
founderLockedTokens = founderLockedTokens.sub(value);
}
else{
value = founderLockedTokens;
founderLockedTokens = 0;
}
transfer(_p1, value.mul(30).div(100));
transfer(_p2, value.mul(30).div(100));
transfer(_p3, value.mul(20).div(100));
transfer(_p4, value.mul(15).div(100));
transfer(_p5, value.mul(5).div(100));
}
else{
revert();
}
emit FounderUnlock(value, now);
}
////////////////////////////////////////////////////////
/////////////////PUBLIC FACING - HXY CONTROL//////////
//////////////////////////////////////////////////////
//freeze HXY tokens to contract
function FreezeTokens(uint amt)
public
{
require(amt > 0, "zero input");
require(tokenBalance() >= amt, "Error: insufficient balance");//ensure user has enough funds
if(isFreezeFinished(msg.sender)){
UnfreezeTokens();//unfreezes all currently frozen tokens + profit
}
//update balances
tokenFrozenBalances[msg.sender] = tokenFrozenBalances[msg.sender].add(amt);
totalFrozen = totalFrozen.add(amt);
frozen[msg.sender].freezeStartTimestamp = now;
_transfer(msg.sender, address(this), amt);//make transfer
emit TokenFreeze(msg.sender, amt);
}
//unfreeze HXY tokens from contract
function UnfreezeTokens()
public
synchronized
{
require(tokenFrozenBalances[msg.sender] > 0,"Error: unsufficient frozen balance");//ensure user has enough frozen funds
require(isFreezeFinished(msg.sender), "tokens cannot be unfrozen yet. min 7 day freeze");
uint amt = tokenFrozenBalances[msg.sender];
uint256 interest = calcFreezingRewards(msg.sender);
_mint(msg.sender, interest);//mint HXY - total unfrozen / 1000 * (minFreezeDayLength + days past) @ 36.5% per year
frozen[msg.sender].totalEarnedInterest += interest;
tokenFrozenBalances[msg.sender] = 0;
frozen[msg.sender].freezeStartTimestamp = 0;
totalFrozen = totalFrozen.sub(amt);
_transfer(address(this), msg.sender, amt);//make transfer
emit TokenUnfreeze(msg.sender, amt);
}
//returns freezing reward in HXY
function calcFreezingRewards(address _user)
public
view
returns(uint)
{
return (tokenFrozenBalances[_user].div(1000) * (minFreezeDayLength + daysPastMinFreezeTime(_user)));
}
//returns amount of days frozen past min freeze time of 7 days
function daysPastMinFreezeTime(address _user)
public
view
returns(uint)
{
if(frozen[_user].freezeStartTimestamp == 0){
return 0;
}
uint daysPast = now.sub(frozen[_user].freezeStartTimestamp).div(daySeconds);
if(daysPast >= minFreezeDayLength){
return daysPast - minFreezeDayLength;// returns 0 if under 1 day passed
}
else{
return 0;
}
}
//freeze HXY tokens to contract for duration (till maxSupply reached)
function FreezeFreeMint(uint amt, address user, uint dapp)
public
onlyMinters
synchronized
{
require(amt > 0, "zero input");
if(!mintBlock){
//mint tokens
uint t = totalSupply();
freeMintHXY(amt,address(this));//mint HXY to contract and freeze
//adjust for max supply breach
if(totalSupply().sub(t) < amt){
amt = totalSupply().sub(t);
}
//update balances
freeMintFrozenBalances[user] = freeMintFrozenBalances[user].add(amt);
totalFrozen = totalFrozen.add(amt);
totalFreeMintFrozen = totalFreeMintFrozen.add(amt);
freeMintFrozen[user].totalHxyMinted += amt;
emit FreeMintFreeze(user, amt, dapp);
}
}
//freeze HXY tokens to contract from ref bonus (till maxSupply reached)
function FreezeRefFreeMint(uint amt, address ref)
internal
{
require(amt > 0, "zero input");
if(!mintBlock){
//mint tokens
uint t = totalSupply();
freeMintHXY(amt,address(this));//mint HXY to contract and freeze
//adjust for max supply breach
if(totalSupply().sub(t) < amt){
amt = totalSupply().sub(t);
}
//update balances
freeMintFrozenBalances[ref] = freeMintFrozenBalances[ref].add(amt);
totalFrozen = totalFrozen.add(amt);
totalFreeMintFrozen = totalFreeMintFrozen.add(amt);
freeMintFrozen[ref].totalHxyMinted += amt;
emit FreeMintFreeze(ref, amt, 0);
}
}
//unfreeze HXY tokens from contract
function UnfreezeFreeMint()
public
synchronized
{
require(freeMintFrozenBalances[msg.sender] > 0,"Error: unsufficient frozen balance");//ensure user has enough frozen funds
require(mintBlock, "tokens cannot be unfrozen yet. max supply not yet reached");
//update values
uint amt = freeMintFrozenBalances[msg.sender];
freeMintFrozenBalances[msg.sender] = 0;
totalFrozen = totalFrozen.sub(amt);
totalFreeMintFrozen = totalFreeMintFrozen.sub(amt);
//make transfer
_transfer(address(this), msg.sender, amt);
emit FreeMintUnfreeze(msg.sender, amt);
}
//mint HXY to address
function freeMintHXY(uint value, address minter)
internal
{
uint amt = value;
_mint(minter, amt);//mint HXY
}
//transforms HEX to HXY
function transformHEX(uint hearts, address ref)//Approval needed
public
synchronized
{
require(roomActive, "transforms not yet active");
require(hearts >= 100, "value too low");
require(hexInterface.transferFrom(msg.sender, address(this), hearts), "Transfer failed");//send hex from user to contract
//allocate funds
hexDivs += hearts.div(2);//50%
hexLiquidity += hearts.div(2);//50%
//get HXY price
(uint reserve0, uint reserve1,) = uniPairInterface.getReserves();
uint hxy = uniV2Router.quote(hearts, reserve0, reserve1);
if(ref != address(0))//ref
{
totalHxyTransformed += hxy.add(hxy.div(10));
totalHeartsTransformed += hearts;
FreezeRefFreeMint(hxy.div(10), ref);
}
else{//no ref
totalHxyTransformed += hxy;
totalHeartsTransformed += hearts;
}
require(totalHxyTransformed <= 3000000000000000, "transform threshold breached");//remaining for interest and free mint
_mint(msg.sender, hxy);
emit Transform(hearts, hxy, msg.sender);
}
function pushLiquidity()
public
synchronized
{
require(hexLiquidity > 1000, "nothing to add");
//get price
(uint reserve0, uint reserve1,) = uniPairInterface.getReserves();
uint hxy = uniV2Router.quote(hexLiquidity, reserve0, reserve1);
_mint(address(this), hxy);
//approve
this.safeApprove(routerAddress, hxy);
require(hexInterface.approve(routerAddress, hexLiquidity), "could not approve");
//add liquidity
(uint amountA, uint amountB, uint liquidity) = uniV2Router.addLiquidity(hexAddress, address(this), hexLiquidity, hxy, 0, 0, _p1, now.add(800));
totalLiquidityAdded += hexLiquidity;
//reset
hexLiquidity = 0;
emit LiquidityPush(amountA, amountB, liquidity);
}
function pushDivs()
public
synchronized
{
require(hexDivs > 0, "nothing to distribute");
//send divs
totalDividends += hexDivs;
hexInterface.transfer(airdropContract, hexDivs);
//send any unallocated HEX in contract to dividend contract
uint overflow = 0;
if(hexInterface.balanceOf(address(this)).sub(hexLiquidity) > 0){
overflow = hexInterface.balanceOf(address(this)).sub(hexLiquidity);
hexInterface.transfer(airdropContract, overflow);
}
emit DividendPush(hexDivs.add(overflow));
//reset
hexDivs = 0;
}
///////////////////////////////
////////ADMIN/MULTISIG ONLY//////////////
///////////////////////////////
function setMultiSig(address _multisig)
public
onlyAdmins
onlyOnceMultisig
{
multisig = _multisig;
}
//set airdropcontract for can only be set once
function setAirdropContract(address payable _airdropContract)
public
onlyMultisig
{
airdropContract = _airdropContract;
}
//allows addition of contract addresses that can call this contracts mint function.
function addMinter(address minter)
public
onlyMultisig
returns (bool)
{
minters[minter] = true;
minterAddresses.push(minter);
return true;
}
//transform room initiation
function transformActivate()
public
onlyMultisig
onlyOnceTransform
{
roomActive = true;
}
function setExchange(address exchange)
public
onlyMultisig
{
uniHEXHXY = exchange;
uniPairInterface = IUniswapV2Pair(uniHEXHXY);
}
function setV2Router(address router)
public
onlyMultisig
{
routerAddress = router;
uniV2Router = IUniswapV2Router02(routerAddress);
}
///////////////////////////////
////////VIEW ONLY//////////////
///////////////////////////////
//total HXY frozen in contract
function totalFrozenTokenBalance()
public
view
returns (uint256)
{
return totalFrozen;
}
//HXY balance of caller
function tokenBalance()
public
view
returns (uint256)
{
return balanceOf(msg.sender);
}
//
function isFreezeFinished(address _user)
public
view
returns(bool)
{
if(frozen[_user].freezeStartTimestamp == 0){
return false;
}
else{
return frozen[_user].freezeStartTimestamp.add((minFreezeDayLength).mul(daySeconds)) <= now;
}
}
function donate() public payable {
require(msg.value > 0);
bool success = false;
uint256 balance = msg.value;
//distribute
(success, ) = _p1.call{value:balance.mul(30).div(100)}{gas:21000}('');
require(success, "Transfer failed");
(success, ) = _p2.call{value:balance.mul(30).div(100)}{gas:21000}('');
require(success, "Transfer failed");
(success, ) = _p3.call{value:balance.mul(20).div(100)}{gas:21000}('');
require(success, "Transfer failed");
(success, ) = _p4.call{value:balance.mul(15).div(100)}{gas:21000}('');
require(success, "Transfer failed");
(success, ) = _p5.call{value:balance.mul(5).div(100)}{gas:21000}('');
require(success, "Transfer failed");
}
}
pragma solidity 0.6.4;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);//from address(0) for minting
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity 0.6.4;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
