Contract Name:
HPOS10iWinnersCircleGenesis
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./interface/IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
////////// CHANGELOG: turn `approve` to virtual //////////
import "./interface/IERC721A.sol";
import "./interface/IERC721Receiver.sol";
import "../lib/Address.sol";
import "../external-deps/openzeppelin/utils/Context.sol";
import "../lib/Strings.sol";
import "./ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721A {
using Address for address;
using Strings for uint256;
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner)
if (!isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract())
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex && !_ownerships[tokenId].burned;
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, "");
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 quantity, bytes memory _data) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex < end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) private {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = to;
currSlot.startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
address from = prevOwnership.addr;
if (approvalCheck) {
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
AddressData storage addressData = _addressData[from];
addressData.balance -= 1;
addressData.numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = from;
currSlot.startTimestamp = uint64(block.timestamp);
currSlot.burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId, address owner) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(address from, address to, uint256 startTokenId, uint256 quantity) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(address from, address to, uint256 startTokenId, uint256 quantity) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* [EIP](https://eips.ethereum.org/EIPS/eip-165).
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: Apache 2.0
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be payed in that same unit of exchange.
*/
function royaltyInfo(
uint256 tokenId,
uint256 salePrice
) external view returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.11;
import "./IERC165.sol";
import "./IERC721.sol";
interface IERC4906 is IERC165 {
/// @dev This event emits when the metadata of a token is changed.
/// So that the third-party platforms such as NFT market could
/// timely update the images and related attributes of the NFT.
event MetadataUpdate(uint256 _tokenId);
/// @dev This event emits when the metadata of a range of tokens is changed.
/// So that the third-party platforms such as NFT market could
/// timely update the images and related attributes of the NFTs.
event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import "./IERC721.sol";
import "./IERC721Metadata.sol";
/**
* @dev Interface of an ERC721A compliant contract.
*/
interface IERC721A is IERC721, IERC721Metadata {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* The caller cannot approve to the current owner.
*/
error ApprovalToCurrentOwner();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
/**
* @dev Returns the total amount of tokens stored by the contract.
*
* Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
*/
function totalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @title ERC-721 Non-Fungible Token Standard, optional metadata extension
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x5b5e139f.
/* is ERC721 */
interface IERC721Metadata {
/// @notice A descriptive name for a collection of NFTs in this contract
function name() external view returns (string memory);
/// @notice An abbreviated name for NFTs in this contract
function symbol() external view returns (string memory);
/// @notice A distinct Uniform Resource Identifier (URI) for a given asset.
/// @dev Throws if `_tokenId` is not a valid NFT. URIs are defined in RFC
/// 3986. The URI may point to a JSON file that conforms to the "ERC721
/// Metadata JSON Schema".
function tokenURI(uint256 _tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import "./IERC721AQueryable.sol";
import "../ERC721AVirtualApprove.sol";
/**
* @title ERC721A Queryable
* @dev ERC721A subclass with convenience query functions.
*/
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) public view override returns (TokenOwnership memory) {
TokenOwnership memory ownership;
if (tokenId < _startTokenId() || tokenId >= _currentIndex) {
return ownership;
}
ownership = _ownerships[tokenId];
if (ownership.burned) {
return ownership;
}
return _ownershipOf(tokenId);
}
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view override returns (TokenOwnership[] memory) {
unchecked {
uint256 tokenIdsLength = tokenIds.length;
TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);
for (uint256 i; i != tokenIdsLength; ++i) {
ownerships[i] = explicitOwnershipOf(tokenIds[i]);
}
return ownerships;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
/* solhint-disable*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view override returns (uint256[] memory) {
unchecked {
if (start >= stop) revert InvalidQueryRange();
uint256 tokenIdsIdx;
uint256 stopLimit = _currentIndex;
// Set `start = max(start, _startTokenId())`.
if (start < _startTokenId()) {
start = _startTokenId();
}
// Set `stop = min(stop, _currentIndex)`.
if (stop > stopLimit) {
stop = stopLimit;
}
uint256 tokenIdsMaxLength = balanceOf(owner);
// Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,
// to cater for cases where `balanceOf(owner)` is too big.
if (start < stop) {
uint256 rangeLength = stop - start;
if (rangeLength < tokenIdsMaxLength) {
tokenIdsMaxLength = rangeLength;
}
} else {
tokenIdsMaxLength = 0;
}
uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);
if (tokenIdsMaxLength == 0) {
return tokenIds;
}
// We need to call `explicitOwnershipOf(start)`,
// because the slot at `start` may not be initialized.
TokenOwnership memory ownership = explicitOwnershipOf(start);
address currOwnershipAddr;
// If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.
// `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.
if (!ownership.burned) {
currOwnershipAddr = ownership.addr;
}
for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {
ownership = _ownerships[i];
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
// Downsize the array to fit.
assembly {
mstore(tokenIds, tokenIdsIdx)
}
return tokenIds;
}
}
/* solhint-enable */
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view override returns (uint256[] memory) {
unchecked {
uint256 tokenIdsIdx;
address currOwnershipAddr;
uint256 tokenIdsLength = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenIdsLength);
TokenOwnership memory ownership;
for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {
ownership = _ownerships[i];
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
return tokenIds;
}
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import "../interface/IERC721A.sol";
/**
* @dev Interface of an ERC721AQueryable compliant contract.
*/
interface IERC721AQueryable is IERC721A {
/**
* Invalid query range (`start` >= `stop`).
*/
error InvalidQueryRange();
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(address owner, uint256 start, uint256 stop) external view returns (uint256[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view returns (uint256[] memory);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/IContractMetadata.sol";
/**
* @title Contract Metadata
* @notice Thirdweb's `ContractMetadata` is a contract extension for any base contracts. It lets you set a metadata URI
* for you contract.
* Additionally, `ContractMetadata` is necessary for NFT contracts that want royalties to get distributed on OpenSea.
*/
abstract contract ContractMetadata is IContractMetadata {
/// @notice Returns the contract metadata URI.
string public override contractURI;
/**
* @notice Lets a contract admin set the URI for contract-level metadata.
* @dev Caller should be authorized to setup contractURI, e.g. contract admin.
* See {_canSetContractURI}.
* Emits {ContractURIUpdated Event}.
*
* @param _uri keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
*/
function setContractURI(string memory _uri) external override {
if (!_canSetContractURI()) {
revert("Not authorized");
}
_setupContractURI(_uri);
}
/// @dev Lets a contract admin set the URI for contract-level metadata.
function _setupContractURI(string memory _uri) internal {
string memory prevURI = contractURI;
contractURI = _uri;
emit ContractURIUpdated(prevURI, _uri);
}
/// @dev Returns whether contract metadata can be set in the given execution context.
function _canSetContractURI() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache 2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "../lib/Address.sol";
import "./interface/IMulticall.sol";
/**
* @dev Provides a function to batch together multiple calls in a single external call.
*
* _Available since v4.1._
*/
contract Multicall is IMulticall {
/**
* @notice Receives and executes a batch of function calls on this contract.
* @dev Receives and executes a batch of function calls on this contract.
*
* @param data The bytes data that makes up the batch of function calls to execute.
* @return results The bytes data that makes up the result of the batch of function calls executed.
*/
function multicall(bytes[] calldata data) external returns (bytes[] memory results) {
results = new bytes[](data.length);
address sender = _msgSender();
bool isForwarder = msg.sender != sender;
for (uint256 i = 0; i < data.length; i++) {
if (isForwarder) {
results[i] = Address.functionDelegateCall(address(this), abi.encodePacked(data[i], sender));
} else {
results[i] = Address.functionDelegateCall(address(this), data[i]);
}
}
return results;
}
/// @notice Returns the sender in the given execution context.
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/IOwnable.sol";
/**
* @title Ownable
* @notice Thirdweb's `Ownable` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* who the 'owner' of the inheriting smart contract is, and lets the inheriting contract perform conditional logic that uses
* information about who the contract's owner is.
*/
abstract contract Ownable is IOwnable {
/// @dev Owner of the contract (purpose: OpenSea compatibility)
address private _owner;
/// @dev Reverts if caller is not the owner.
modifier onlyOwner() {
if (msg.sender != _owner) {
revert("Not authorized");
}
_;
}
/**
* @notice Returns the owner of the contract.
*/
function owner() public view override returns (address) {
return _owner;
}
/**
* @notice Lets an authorized wallet set a new owner for the contract.
* @param _newOwner The address to set as the new owner of the contract.
*/
function setOwner(address _newOwner) external override {
if (!_canSetOwner()) {
revert("Not authorized");
}
_setupOwner(_newOwner);
}
/// @dev Lets a contract admin set a new owner for the contract. The new owner must be a contract admin.
function _setupOwner(address _newOwner) internal {
address _prevOwner = _owner;
_owner = _newOwner;
emit OwnerUpdated(_prevOwner, _newOwner);
}
/// @dev Returns whether owner can be set in the given execution context.
function _canSetOwner() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/IPermissions.sol";
import "../lib/Strings.sol";
/**
* @title Permissions
* @dev This contracts provides extending-contracts with role-based access control mechanisms
*/
contract Permissions is IPermissions {
/// @dev Map from keccak256 hash of a role => a map from address => whether address has role.
mapping(bytes32 => mapping(address => bool)) private _hasRole;
/// @dev Map from keccak256 hash of a role to role admin. See {getRoleAdmin}.
mapping(bytes32 => bytes32) private _getRoleAdmin;
/// @dev Default admin role for all roles. Only accounts with this role can grant/revoke other roles.
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/// @dev Modifier that checks if an account has the specified role; reverts otherwise.
modifier onlyRole(bytes32 role) {
_checkRole(role, msg.sender);
_;
}
/**
* @notice Checks whether an account has a particular role.
* @dev Returns `true` if `account` has been granted `role`.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account for which the role is being checked.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _hasRole[role][account];
}
/**
* @notice Checks whether an account has a particular role;
* role restrictions can be swtiched on and off.
*
* @dev Returns `true` if `account` has been granted `role`.
* Role restrictions can be swtiched on and off:
* - If address(0) has ROLE, then the ROLE restrictions
* don't apply.
* - If address(0) does not have ROLE, then the ROLE
* restrictions will apply.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account for which the role is being checked.
*/
function hasRoleWithSwitch(bytes32 role, address account) public view returns (bool) {
if (!_hasRole[role][address(0)]) {
return _hasRole[role][account];
}
return true;
}
/**
* @notice Returns the admin role that controls the specified role.
* @dev See {grantRole} and {revokeRole}.
* To change a role's admin, use {_setRoleAdmin}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
*/
function getRoleAdmin(bytes32 role) external view override returns (bytes32) {
return _getRoleAdmin[role];
}
/**
* @notice Grants a role to an account, if not previously granted.
* @dev Caller must have admin role for the `role`.
* Emits {RoleGranted Event}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account to which the role is being granted.
*/
function grantRole(bytes32 role, address account) public virtual override {
_checkRole(_getRoleAdmin[role], msg.sender);
if (_hasRole[role][account]) {
revert("Can only grant to non holders");
}
_setupRole(role, account);
}
/**
* @notice Revokes role from an account.
* @dev Caller must have admin role for the `role`.
* Emits {RoleRevoked Event}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account from which the role is being revoked.
*/
function revokeRole(bytes32 role, address account) public virtual override {
_checkRole(_getRoleAdmin[role], msg.sender);
_revokeRole(role, account);
}
/**
* @notice Revokes role from the account.
* @dev Caller must have the `role`, with caller being the same as `account`.
* Emits {RoleRevoked Event}.
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param account Address of the account from which the role is being revoked.
*/
function renounceRole(bytes32 role, address account) public virtual override {
if (msg.sender != account) {
revert("Can only renounce for self");
}
_revokeRole(role, account);
}
/// @dev Sets `adminRole` as `role`'s admin role.
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = _getRoleAdmin[role];
_getRoleAdmin[role] = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/// @dev Sets up `role` for `account`
function _setupRole(bytes32 role, address account) internal virtual {
_hasRole[role][account] = true;
emit RoleGranted(role, account, msg.sender);
}
/// @dev Revokes `role` from `account`
function _revokeRole(bytes32 role, address account) internal virtual {
_checkRole(role, account);
delete _hasRole[role][account];
emit RoleRevoked(role, account, msg.sender);
}
/// @dev Checks `role` for `account`. Reverts with a message including the required role.
function _checkRole(bytes32 role, address account) internal view virtual {
if (!_hasRole[role][account]) {
revert(
string(
abi.encodePacked(
"Permissions: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/// @dev Checks `role` for `account`. Reverts with a message including the required role.
function _checkRoleWithSwitch(bytes32 role, address account) internal view virtual {
if (!hasRoleWithSwitch(role, account)) {
revert(
string(
abi.encodePacked(
"Permissions: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/IPermissionsEnumerable.sol";
import "./Permissions.sol";
/**
* @title PermissionsEnumerable
* @dev This contracts provides extending-contracts with role-based access control mechanisms.
* Also provides interfaces to view all members with a given role, and total count of members.
*/
contract PermissionsEnumerable is IPermissionsEnumerable, Permissions {
/**
* @notice A data structure to store data of members for a given role.
*
* @param index Current index in the list of accounts that have a role.
* @param members map from index => address of account that has a role
* @param indexOf map from address => index which the account has.
*/
struct RoleMembers {
uint256 index;
mapping(uint256 => address) members;
mapping(address => uint256) indexOf;
}
/// @dev map from keccak256 hash of a role to its members' data. See {RoleMembers}.
mapping(bytes32 => RoleMembers) private roleMembers;
/**
* @notice Returns the role-member from a list of members for a role,
* at a given index.
* @dev Returns `member` who has `role`, at `index` of role-members list.
* See struct {RoleMembers}, and mapping {roleMembers}
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
* @param index Index in list of current members for the role.
*
* @return member Address of account that has `role`
*/
function getRoleMember(bytes32 role, uint256 index) external view override returns (address member) {
uint256 currentIndex = roleMembers[role].index;
uint256 check;
for (uint256 i = 0; i < currentIndex; i += 1) {
if (roleMembers[role].members[i] != address(0)) {
if (check == index) {
member = roleMembers[role].members[i];
return member;
}
check += 1;
} else if (hasRole(role, address(0)) && i == roleMembers[role].indexOf[address(0)]) {
check += 1;
}
}
}
/**
* @notice Returns total number of accounts that have a role.
* @dev Returns `count` of accounts that have `role`.
* See struct {RoleMembers}, and mapping {roleMembers}
*
* @param role keccak256 hash of the role. e.g. keccak256("TRANSFER_ROLE")
*
* @return count Total number of accounts that have `role`
*/
function getRoleMemberCount(bytes32 role) external view override returns (uint256 count) {
uint256 currentIndex = roleMembers[role].index;
for (uint256 i = 0; i < currentIndex; i += 1) {
if (roleMembers[role].members[i] != address(0)) {
count += 1;
}
}
if (hasRole(role, address(0))) {
count += 1;
}
}
/// @dev Revokes `role` from `account`, and removes `account` from {roleMembers}
/// See {_removeMember}
function _revokeRole(bytes32 role, address account) internal override {
super._revokeRole(role, account);
_removeMember(role, account);
}
/// @dev Grants `role` to `account`, and adds `account` to {roleMembers}
/// See {_addMember}
function _setupRole(bytes32 role, address account) internal override {
super._setupRole(role, account);
_addMember(role, account);
}
/// @dev adds `account` to {roleMembers}, for `role`
function _addMember(bytes32 role, address account) internal {
uint256 idx = roleMembers[role].index;
roleMembers[role].index += 1;
roleMembers[role].members[idx] = account;
roleMembers[role].indexOf[account] = idx;
}
/// @dev removes `account` from {roleMembers}, for `role`
function _removeMember(bytes32 role, address account) internal {
uint256 idx = roleMembers[role].indexOf[account];
delete roleMembers[role].members[idx];
delete roleMembers[role].indexOf[account];
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/IPrimarySale.sol";
/**
* @title Primary Sale
* @notice Thirdweb's `PrimarySale` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of primary sales, and lets the inheriting contract perform conditional logic that uses information about
* primary sales, if desired.
*/
abstract contract PrimarySale is IPrimarySale {
/// @dev The address that receives all primary sales value.
address private recipient;
/// @dev Returns primary sale recipient address.
function primarySaleRecipient() public view override returns (address) {
return recipient;
}
/**
* @notice Updates primary sale recipient.
* @dev Caller should be authorized to set primary sales info.
* See {_canSetPrimarySaleRecipient}.
* Emits {PrimarySaleRecipientUpdated Event}; See {_setupPrimarySaleRecipient}.
*
* @param _saleRecipient Address to be set as new recipient of primary sales.
*/
function setPrimarySaleRecipient(address _saleRecipient) external override {
if (!_canSetPrimarySaleRecipient()) {
revert("Not authorized");
}
_setupPrimarySaleRecipient(_saleRecipient);
}
/// @dev Lets a contract admin set the recipient for all primary sales.
function _setupPrimarySaleRecipient(address _saleRecipient) internal {
if (_saleRecipient == address(0)) {
revert("Invalid recipient");
}
recipient = _saleRecipient;
emit PrimarySaleRecipientUpdated(_saleRecipient);
}
/// @dev Returns whether primary sale recipient can be set in the given execution context.
function _canSetPrimarySaleRecipient() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/IRoyalty.sol";
/**
* @title Royalty
* @notice Thirdweb's `Royalty` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of royalty fee and the royalty fee basis points, and lets the inheriting contract perform conditional logic
* that uses information about royalty fees, if desired.
*
* @dev The `Royalty` contract is ERC2981 compliant.
*/
abstract contract Royalty is IRoyalty {
/// @dev The (default) address that receives all royalty value.
address private royaltyRecipient;
/// @dev The (default) % of a sale to take as royalty (in basis points).
uint16 private royaltyBps;
/// @dev Token ID => royalty recipient and bps for token
mapping(uint256 => RoyaltyInfo) private royaltyInfoForToken;
/**
* @notice View royalty info for a given token and sale price.
* @dev Returns royalty amount and recipient for `tokenId` and `salePrice`.
* @param tokenId The tokenID of the NFT for which to query royalty info.
* @param salePrice Sale price of the token.
*
* @return receiver Address of royalty recipient account.
* @return royaltyAmount Royalty amount calculated at current royaltyBps value.
*/
function royaltyInfo(
uint256 tokenId,
uint256 salePrice
) external view virtual override returns (address receiver, uint256 royaltyAmount) {
(address recipient, uint256 bps) = getRoyaltyInfoForToken(tokenId);
receiver = recipient;
royaltyAmount = (salePrice * bps) / 10_000;
}
/**
* @notice View royalty info for a given token.
* @dev Returns royalty recipient and bps for `_tokenId`.
* @param _tokenId The tokenID of the NFT for which to query royalty info.
*/
function getRoyaltyInfoForToken(uint256 _tokenId) public view override returns (address, uint16) {
RoyaltyInfo memory royaltyForToken = royaltyInfoForToken[_tokenId];
return
royaltyForToken.recipient == address(0)
? (royaltyRecipient, uint16(royaltyBps))
: (royaltyForToken.recipient, uint16(royaltyForToken.bps));
}
/**
* @notice Returns the defualt royalty recipient and BPS for this contract's NFTs.
*/
function getDefaultRoyaltyInfo() external view override returns (address, uint16) {
return (royaltyRecipient, uint16(royaltyBps));
}
/**
* @notice Updates default royalty recipient and bps.
* @dev Caller should be authorized to set royalty info.
* See {_canSetRoyaltyInfo}.
* Emits {DefaultRoyalty Event}; See {_setupDefaultRoyaltyInfo}.
*
* @param _royaltyRecipient Address to be set as default royalty recipient.
* @param _royaltyBps Updated royalty bps.
*/
function setDefaultRoyaltyInfo(address _royaltyRecipient, uint256 _royaltyBps) external override {
if (!_canSetRoyaltyInfo()) {
revert("Not authorized");
}
_setupDefaultRoyaltyInfo(_royaltyRecipient, _royaltyBps);
}
/// @dev Lets a contract admin update the default royalty recipient and bps.
function _setupDefaultRoyaltyInfo(address _royaltyRecipient, uint256 _royaltyBps) internal {
if (_royaltyBps > 10_000) {
revert("Exceeds max bps");
}
royaltyRecipient = _royaltyRecipient;
royaltyBps = uint16(_royaltyBps);
emit DefaultRoyalty(_royaltyRecipient, _royaltyBps);
}
/**
* @notice Updates default royalty recipient and bps for a particular token.
* @dev Sets royalty info for `_tokenId`. Caller should be authorized to set royalty info.
* See {_canSetRoyaltyInfo}.
* Emits {RoyaltyForToken Event}; See {_setupRoyaltyInfoForToken}.
*
* @param _recipient Address to be set as royalty recipient for given token Id.
* @param _bps Updated royalty bps for the token Id.
*/
function setRoyaltyInfoForToken(uint256 _tokenId, address _recipient, uint256 _bps) external override {
if (!_canSetRoyaltyInfo()) {
revert("Not authorized");
}
_setupRoyaltyInfoForToken(_tokenId, _recipient, _bps);
}
/// @dev Lets a contract admin set the royalty recipient and bps for a particular token Id.
function _setupRoyaltyInfoForToken(uint256 _tokenId, address _recipient, uint256 _bps) internal {
if (_bps > 10_000) {
revert("Exceeds max bps");
}
royaltyInfoForToken[_tokenId] = RoyaltyInfo({ recipient: _recipient, bps: _bps });
emit RoyaltyForToken(_tokenId, _recipient, _bps);
}
/// @dev Returns whether royalty info can be set in the given execution context.
function _canSetRoyaltyInfo() internal view virtual returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./interface/ISignatureMintERC721.sol";
import "../external-deps/openzeppelin/utils/cryptography/EIP712.sol";
abstract contract SignatureMintERC721 is EIP712, ISignatureMintERC721 {
using ECDSA for bytes32;
bytes32 private constant TYPEHASH =
keccak256(
"MintRequest(address to,address royaltyRecipient,uint256 royaltyBps,address primarySaleRecipient,string uri,uint256 quantity,uint256 pricePerToken,address currency,uint128 validityStartTimestamp,uint128 validityEndTimestamp,bytes32 uid)"
);
/// @dev Mapping from mint request UID => whether the mint request is processed.
mapping(bytes32 => bool) private minted;
constructor() EIP712("SignatureMintERC721", "1") {}
/// @dev Verifies that a mint request is signed by an authorized account.
function verify(
MintRequest calldata _req,
bytes calldata _signature
) public view override returns (bool success, address signer) {
signer = _recoverAddress(_req, _signature);
success = !minted[_req.uid] && _canSignMintRequest(signer);
}
/// @dev Returns whether a given address is authorized to sign mint requests.
function _canSignMintRequest(address _signer) internal view virtual returns (bool);
/// @dev Verifies a mint request and marks the request as minted.
function _processRequest(MintRequest calldata _req, bytes calldata _signature) internal returns (address signer) {
bool success;
(success, signer) = verify(_req, _signature);
if (!success) {
revert("Invalid req");
}
if (_req.validityStartTimestamp > block.timestamp || block.timestamp > _req.validityEndTimestamp) {
revert("Req expired");
}
require(_req.to != address(0), "recipient undefined");
require(_req.quantity > 0, "0 qty");
minted[_req.uid] = true;
}
/// @dev Returns the address of the signer of the mint request.
function _recoverAddress(MintRequest calldata _req, bytes calldata _signature) internal view returns (address) {
return _hashTypedDataV4(keccak256(_encodeRequest(_req))).recover(_signature);
}
/// @dev Resolves 'stack too deep' error in `recoverAddress`.
function _encodeRequest(MintRequest calldata _req) internal pure returns (bytes memory) {
return
abi.encode(
TYPEHASH,
_req.to,
_req.royaltyRecipient,
_req.royaltyBps,
_req.primarySaleRecipient,
keccak256(bytes(_req.uri)),
_req.quantity,
_req.pricePerToken,
_req.currency,
_req.validityStartTimestamp,
_req.validityEndTimestamp,
_req.uid
);
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* Thirdweb's `ContractMetadata` is a contract extension for any base contracts. It lets you set a metadata URI
* for you contract.
*
* Additionally, `ContractMetadata` is necessary for NFT contracts that want royalties to get distributed on OpenSea.
*/
interface IContractMetadata {
/// @dev Returns the metadata URI of the contract.
function contractURI() external view returns (string memory);
/**
* @dev Sets contract URI for the storefront-level metadata of the contract.
* Only module admin can call this function.
*/
function setContractURI(string calldata _uri) external;
/// @dev Emitted when the contract URI is updated.
event ContractURIUpdated(string prevURI, string newURI);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* @dev Provides a function to batch together multiple calls in a single external call.
*
* _Available since v4.1._
*/
interface IMulticall {
/**
* @dev Receives and executes a batch of function calls on this contract.
*/
function multicall(bytes[] calldata data) external returns (bytes[] memory results);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* Thirdweb's `Ownable` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* who the 'owner' of the inheriting smart contract is, and lets the inheriting contract perform conditional logic that uses
* information about who the contract's owner is.
*/
interface IOwnable {
/// @dev Returns the owner of the contract.
function owner() external view returns (address);
/// @dev Lets a module admin set a new owner for the contract. The new owner must be a module admin.
function setOwner(address _newOwner) external;
/// @dev Emitted when a new Owner is set.
event OwnerUpdated(address indexed prevOwner, address indexed newOwner);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IPermissions {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "./IPermissions.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IPermissionsEnumerable is IPermissions {
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* [forum post](https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296)
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* Thirdweb's `Primary` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of primary sales, and lets the inheriting contract perform conditional logic that uses information about
* primary sales, if desired.
*/
interface IPrimarySale {
/// @dev The adress that receives all primary sales value.
function primarySaleRecipient() external view returns (address);
/// @dev Lets a module admin set the default recipient of all primary sales.
function setPrimarySaleRecipient(address _saleRecipient) external;
/// @dev Emitted when a new sale recipient is set.
event PrimarySaleRecipientUpdated(address indexed recipient);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "../../eip/interface/IERC2981.sol";
/**
* Thirdweb's `Royalty` is a contract extension to be used with any base contract. It exposes functions for setting and reading
* the recipient of royalty fee and the royalty fee basis points, and lets the inheriting contract perform conditional logic
* that uses information about royalty fees, if desired.
*
* The `Royalty` contract is ERC2981 compliant.
*/
interface IRoyalty is IERC2981 {
struct RoyaltyInfo {
address recipient;
uint256 bps;
}
/// @dev Returns the royalty recipient and fee bps.
function getDefaultRoyaltyInfo() external view returns (address, uint16);
/// @dev Lets a module admin update the royalty bps and recipient.
function setDefaultRoyaltyInfo(address _royaltyRecipient, uint256 _royaltyBps) external;
/// @dev Lets a module admin set the royalty recipient for a particular token Id.
function setRoyaltyInfoForToken(uint256 tokenId, address recipient, uint256 bps) external;
/// @dev Returns the royalty recipient for a particular token Id.
function getRoyaltyInfoForToken(uint256 tokenId) external view returns (address, uint16);
/// @dev Emitted when royalty info is updated.
event DefaultRoyalty(address indexed newRoyaltyRecipient, uint256 newRoyaltyBps);
/// @dev Emitted when royalty recipient for tokenId is set
event RoyaltyForToken(uint256 indexed tokenId, address indexed royaltyRecipient, uint256 royaltyBps);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* The 'signature minting' mechanism used in thirdweb Token smart contracts is a way for a contract admin to authorize an external party's
* request to mint tokens on the admin's contract.
*
* At a high level, this means you can authorize some external party to mint tokens on your contract, and specify what exactly will be
* minted by that external party.
*/
interface ISignatureMintERC721 {
/**
* @notice The body of a request to mint tokens.
*
* @param to The receiver of the tokens to mint.
* @param royaltyRecipient The recipient of the minted token's secondary sales royalties. (Not applicable for ERC20 tokens)
* @param royaltyBps The percentage of the minted token's secondary sales to take as royalties. (Not applicable for ERC20 tokens)
* @param primarySaleRecipient The recipient of the minted token's primary sales proceeds.
* @param uri The metadata URI of the token to mint. (Not applicable for ERC20 tokens)
* @param quantity The quantity of tokens to mint.
* @param pricePerToken The price to pay per quantity of tokens minted.
* @param currency The currency in which to pay the price per token minted.
* @param validityStartTimestamp The unix timestamp after which the payload is valid.
* @param validityEndTimestamp The unix timestamp at which the payload expires.
* @param uid A unique identifier for the payload.
*/
struct MintRequest {
address to;
address royaltyRecipient;
uint256 royaltyBps;
address primarySaleRecipient;
string uri;
uint256 quantity;
uint256 pricePerToken;
address currency;
uint128 validityStartTimestamp;
uint128 validityEndTimestamp;
bytes32 uid;
}
/// @dev Emitted when tokens are minted.
event TokensMintedWithSignature(
address indexed signer,
address indexed mintedTo,
uint256 indexed tokenIdMinted,
MintRequest mintRequest
);
/**
* @notice Verifies that a mint request is signed by an account holding
* MINTER_ROLE (at the time of the function call).
*
* @param req The payload / mint request.
* @param signature The signature produced by an account signing the mint request.
*
* returns (success, signer) Result of verification and the recovered address.
*/
function verify(
MintRequest calldata req,
bytes calldata signature
) external view returns (bool success, address signer);
/**
* @notice Mints tokens according to the provided mint request.
*
* @param req The payload / mint request.
* @param signature The signature produced by an account signing the mint request.
*/
function mintWithSignature(
MintRequest calldata req,
bytes calldata signature
) external payable returns (address signer);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../../../../../eip/interface/IERC20.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Base64.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides a set of functions to operate with Base64 strings.
*
* _Available since v4.5._
*/
library Base64 {
/**
* @dev Base64 Encoding/Decoding Table
*/
string internal constant _TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
/**
* @dev Converts a `bytes` to its Bytes64 `string` representation.
*/
function encode(bytes memory data) internal pure returns (string memory) {
/**
* Inspired by Brecht Devos (Brechtpd) implementation - MIT licence
* https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol
*/
if (data.length == 0) return "";
// Loads the table into memory
string memory table = _TABLE;
// Encoding takes 3 bytes chunks of binary data from `bytes` data parameter
// and split into 4 numbers of 6 bits.
// The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up
// - `data.length + 2` -> Round up
// - `/ 3` -> Number of 3-bytes chunks
// - `4 *` -> 4 characters for each chunk
string memory result = new string(4 * ((data.length + 2) / 3));
/// @solidity memory-safe-assembly
assembly {
// Prepare the lookup table (skip the first "length" byte)
let tablePtr := add(table, 1)
// Prepare result pointer, jump over length
let resultPtr := add(result, 32)
// Run over the input, 3 bytes at a time
for {
let dataPtr := data
let endPtr := add(data, mload(data))
} lt(dataPtr, endPtr) {
} {
// Advance 3 bytes
dataPtr := add(dataPtr, 3)
let input := mload(dataPtr)
// To write each character, shift the 3 bytes (18 bits) chunk
// 4 times in blocks of 6 bits for each character (18, 12, 6, 0)
// and apply logical AND with 0x3F which is the number of
// the previous character in the ASCII table prior to the Base64 Table
// The result is then added to the table to get the character to write,
// and finally write it in the result pointer but with a left shift
// of 256 (1 byte) - 8 (1 ASCII char) = 248 bits
mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))
resultPtr := add(resultPtr, 1) // Advance
}
// When data `bytes` is not exactly 3 bytes long
// it is padded with `=` characters at the end
switch mod(mload(data), 3)
case 1 {
mstore8(sub(resultPtr, 1), 0x3d)
mstore8(sub(resultPtr, 2), 0x3d)
}
case 2 {
mstore8(sub(resultPtr, 1), 0x3d)
}
}
return result;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../../../../lib/Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV // Deprecated in v4.8
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
/// @solidity memory-safe-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, "\x19Ethereum Signed Message:\n32")
mstore(0x1c, hash)
message := keccak256(0x00, 0x3c)
}
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
/// @solidity memory-safe-assembly
assembly {
let ptr := mload(0x40)
mstore(ptr, "\x19\x01")
mstore(add(ptr, 0x02), domainSeparator)
mstore(add(ptr, 0x22), structHash)
data := keccak256(ptr, 0x42)
}
}
/**
* @dev Returns an Ethereum Signed Data with intended validator, created from a
* `validator` and `data` according to the version 0 of EIP-191.
*
* See {recover}.
*/
function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x00", validator, data));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)
pragma solidity ^0.8.0;
import "./ECDSA.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
address private immutable _CACHED_THIS;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_CACHED_THIS = address(this);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
interface IWETH {
function deposit() external payable;
function withdraw(uint256 amount) external;
function transfer(address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.1;
/// @author thirdweb, OpenZeppelin Contracts (v4.9.0)
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
// Helper interfaces
import { IWETH } from "../infra/interface/IWETH.sol";
import { SafeERC20, IERC20 } from "../external-deps/openzeppelin/token/ERC20/utils/SafeERC20.sol";
library CurrencyTransferLib {
using SafeERC20 for IERC20;
/// @dev The address interpreted as native token of the chain.
address public constant NATIVE_TOKEN = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
/// @dev Transfers a given amount of currency.
function transferCurrency(address _currency, address _from, address _to, uint256 _amount) internal {
if (_amount == 0) {
return;
}
if (_currency == NATIVE_TOKEN) {
safeTransferNativeToken(_to, _amount);
} else {
safeTransferERC20(_currency, _from, _to, _amount);
}
}
/// @dev Transfers a given amount of currency. (With native token wrapping)
function transferCurrencyWithWrapper(
address _currency,
address _from,
address _to,
uint256 _amount,
address _nativeTokenWrapper
) internal {
if (_amount == 0) {
return;
}
if (_currency == NATIVE_TOKEN) {
if (_from == address(this)) {
// withdraw from weth then transfer withdrawn native token to recipient
IWETH(_nativeTokenWrapper).withdraw(_amount);
safeTransferNativeTokenWithWrapper(_to, _amount, _nativeTokenWrapper);
} else if (_to == address(this)) {
// store native currency in weth
require(_amount == msg.value, "msg.value != amount");
IWETH(_nativeTokenWrapper).deposit{ value: _amount }();
} else {
safeTransferNativeTokenWithWrapper(_to, _amount, _nativeTokenWrapper);
}
} else {
safeTransferERC20(_currency, _from, _to, _amount);
}
}
/// @dev Transfer `amount` of ERC20 token from `from` to `to`.
function safeTransferERC20(address _currency, address _from, address _to, uint256 _amount) internal {
if (_from == _to) {
return;
}
if (_from == address(this)) {
IERC20(_currency).safeTransfer(_to, _amount);
} else {
IERC20(_currency).safeTransferFrom(_from, _to, _amount);
}
}
/// @dev Transfers `amount` of native token to `to`.
function safeTransferNativeToken(address to, uint256 value) internal {
// solhint-disable avoid-low-level-calls
// slither-disable-next-line low-level-calls
(bool success, ) = to.call{ value: value }("");
require(success, "native token transfer failed");
}
/// @dev Transfers `amount` of native token to `to`. (With native token wrapping)
function safeTransferNativeTokenWithWrapper(address to, uint256 value, address _nativeTokenWrapper) internal {
// solhint-disable avoid-low-level-calls
// slither-disable-next-line low-level-calls
(bool success, ) = to.call{ value: value }("");
if (!success) {
IWETH(_nativeTokenWrapper).deposit{ value: value }();
IERC20(_nativeTokenWrapper).safeTransfer(to, value);
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/// @dev Returns the hexadecimal representation of `value`.
/// The output is prefixed with "0x", encoded using 2 hexadecimal digits per byte,
/// and the alphabets are capitalized conditionally according to
/// https://eips.ethereum.org/EIPS/eip-55
function toHexStringChecksummed(address value) internal pure returns (string memory str) {
str = toHexString(value);
/// @solidity memory-safe-assembly
assembly {
let mask := shl(6, div(not(0), 255)) // `0b010000000100000000 ...`
let o := add(str, 0x22)
let hashed := and(keccak256(o, 40), mul(34, mask)) // `0b10001000 ... `
let t := shl(240, 136) // `0b10001000 << 240`
for {
let i := 0
} 1 {
} {
mstore(add(i, i), mul(t, byte(i, hashed)))
i := add(i, 1)
if eq(i, 20) {
break
}
}
mstore(o, xor(mload(o), shr(1, and(mload(0x00), and(mload(o), mask)))))
o := add(o, 0x20)
mstore(o, xor(mload(o), shr(1, and(mload(0x20), and(mload(o), mask)))))
}
}
/// @dev Returns the hexadecimal representation of `value`.
/// The output is prefixed with "0x" and encoded using 2 hexadecimal digits per byte.
function toHexString(address value) internal pure returns (string memory str) {
str = toHexStringNoPrefix(value);
/// @solidity memory-safe-assembly
assembly {
let strLength := add(mload(str), 2) // Compute the length.
mstore(str, 0x3078) // Write the "0x" prefix.
str := sub(str, 2) // Move the pointer.
mstore(str, strLength) // Write the length.
}
}
/// @dev Returns the hexadecimal representation of `value`.
/// The output is encoded using 2 hexadecimal digits per byte.
function toHexStringNoPrefix(address value) internal pure returns (string memory str) {
/// @solidity memory-safe-assembly
assembly {
str := mload(0x40)
// Allocate the memory.
// We need 0x20 bytes for the trailing zeros padding, 0x20 bytes for the length,
// 0x02 bytes for the prefix, and 0x28 bytes for the digits.
// The next multiple of 0x20 above (0x20 + 0x20 + 0x02 + 0x28) is 0x80.
mstore(0x40, add(str, 0x80))
// Store "0123456789abcdef" in scratch space.
mstore(0x0f, 0x30313233343536373839616263646566)
str := add(str, 2)
mstore(str, 40)
let o := add(str, 0x20)
mstore(add(o, 40), 0)
value := shl(96, value)
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
for {
let i := 0
} 1 {
} {
let p := add(o, add(i, i))
let temp := byte(i, value)
mstore8(add(p, 1), mload(and(temp, 15)))
mstore8(p, mload(shr(4, temp)))
i := add(i, 1)
if eq(i, 20) {
break
}
}
}
}
/// @dev Returns the hex encoded string from the raw bytes.
/// The output is encoded using 2 hexadecimal digits per byte.
function toHexString(bytes memory raw) internal pure returns (string memory str) {
str = toHexStringNoPrefix(raw);
/// @solidity memory-safe-assembly
assembly {
let strLength := add(mload(str), 2) // Compute the length.
mstore(str, 0x3078) // Write the "0x" prefix.
str := sub(str, 2) // Move the pointer.
mstore(str, strLength) // Write the length.
}
}
/// @dev Returns the hex encoded string from the raw bytes.
/// The output is encoded using 2 hexadecimal digits per byte.
function toHexStringNoPrefix(bytes memory raw) internal pure returns (string memory str) {
/// @solidity memory-safe-assembly
assembly {
let length := mload(raw)
str := add(mload(0x40), 2) // Skip 2 bytes for the optional prefix.
mstore(str, add(length, length)) // Store the length of the output.
// Store "0123456789abcdef" in scratch space.
mstore(0x0f, 0x30313233343536373839616263646566)
let o := add(str, 0x20)
let end := add(raw, length)
for {
} iszero(eq(raw, end)) {
} {
raw := add(raw, 1)
mstore8(add(o, 1), mload(and(mload(raw), 15)))
mstore8(o, mload(and(shr(4, mload(raw)), 15)))
o := add(o, 2)
}
mstore(o, 0) // Zeroize the slot after the string.
mstore(0x40, add(o, 0x20)) // Allocate the memory.
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/// @author thirdweb
import "@thirdweb-dev/contracts/eip/queryable/ERC721AQueryable.sol";
import "@thirdweb-dev/contracts/extension/ContractMetadata.sol";
import "@thirdweb-dev/contracts/extension/Multicall.sol";
import "@thirdweb-dev/contracts/extension/Ownable.sol";
import "@thirdweb-dev/contracts/extension/Royalty.sol";
import "@thirdweb-dev/contracts/lib/Strings.sol";
/**
* The `ERC721Base` smart contract implements the ERC721 NFT standard, along with the ERC721A optimization to the standard.
* It includes the following additions to standard ERC721 logic:
*
* - Ability to mint NFTs via the provided `mint` function.
*
* - Contract metadata for royalty support on platforms such as OpenSea that use
* off-chain information to distribute roaylties.
*
* - Ownership of the contract, with the ability to restrict certain functions to
* only be called by the contract's owner.
*
* - Multicall capability to perform multiple actions atomically
*
* - EIP 2981 compliance for royalty support on NFT marketplaces.
*/
contract ERC721Base is ERC721AQueryable, ContractMetadata, Multicall, Ownable, Royalty {
using Strings for uint256;
/*//////////////////////////////////////////////////////////////
Constructor
//////////////////////////////////////////////////////////////*/
/**
* @notice Initializes the contract during construction.
*
* @param _defaultAdmin The default admin of the contract.
* @param _name The name of the contract.
* @param _symbol The symbol of the contract.
* @param _royaltyRecipient The address to receive royalties.
* @param _royaltyBps The royalty basis points to be charged. Max = 10000 (10000 = 100%, 1000 = 10%)
*/
constructor(
address _defaultAdmin,
string memory _name,
string memory _symbol,
address _royaltyRecipient,
uint128 _royaltyBps
) ERC721A(_name, _symbol) {
_setupOwner(_defaultAdmin);
_setupDefaultRoyaltyInfo(_royaltyRecipient, _royaltyBps);
}
/*//////////////////////////////////////////////////////////////
ERC165 Logic
//////////////////////////////////////////////////////////////*/
/**
* @dev See ERC165: https://eips.ethereum.org/EIPS/eip-165
* @inheritdoc IERC165
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A, IERC165) returns (bool) {
return
interfaceId == 0x01ffc9a7 || // ERC165 Interface ID for ERC165
interfaceId == 0x80ac58cd || // ERC165 Interface ID for ERC721
interfaceId == 0x5b5e139f || // ERC165 Interface ID for ERC721Metadata
interfaceId == type(IERC2981).interfaceId; // ERC165 ID for ERC2981
}
/*//////////////////////////////////////////////////////////////
Minting logic
//////////////////////////////////////////////////////////////*/
/**
* @notice Lets an owner or approved operator burn the NFT of the given tokenId.
* @dev ERC721A's `_burn(uint256,bool)` internally checks for token approvals.
*
* @param _tokenId The tokenId of the NFT to burn.
*/
function burn(uint256 _tokenId) external virtual {
_burn(_tokenId, true);
}
/*//////////////////////////////////////////////////////////////
Public getters
//////////////////////////////////////////////////////////////*/
/// @notice The tokenId assigned to the next new NFT to be minted.
function nextTokenIdToMint() public view virtual returns (uint256) {
return _currentIndex;
}
/**
* @notice Returns whether a given address is the owner, or approved to transfer an NFT.
*
* @param _operator The address to check.
* @param _tokenId The tokenId of the NFT to check.
*
* @return isApprovedOrOwnerOf Whether the given address is approved to transfer the given NFT.
*/
function isApprovedOrOwner(
address _operator,
uint256 _tokenId
) public view virtual returns (bool isApprovedOrOwnerOf) {
address owner = ownerOf(_tokenId);
isApprovedOrOwnerOf = (_operator == owner ||
isApprovedForAll(owner, _operator) ||
getApproved(_tokenId) == _operator);
}
/*//////////////////////////////////////////////////////////////
Internal (overrideable) functions
//////////////////////////////////////////////////////////////*/
/// @dev Returns whether contract metadata can be set in the given execution context.
function _canSetContractURI() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Returns whether a token can be minted in the given execution context.
function _canMint() internal view virtual returns (bool) {
return msg.sender == owner();
}
/// @dev Returns whether owner can be set in the given execution context.
function _canSetOwner() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Returns whether royalty info can be set in the given execution context.
function _canSetRoyaltyInfo() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @notice Returns the sender in the given execution context.
function _msgSender() internal view override(Multicall, Context) returns (address) {
return msg.sender;
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
import "@thirdweb-dev/contracts/extension/PrimarySale.sol";
import "@thirdweb-dev/contracts/extension/PermissionsEnumerable.sol";
import "@thirdweb-dev/contracts/extension/SignatureMintERC721.sol";
import { CurrencyTransferLib } from "@thirdweb-dev/contracts/lib/CurrencyTransferLib.sol";
import {SharedMetadataMulti} from "./lib/SharedMetadataMulti.sol";
import "./ERC721Base.sol";
contract HPOS10iWinnersCircleGenesis is ERC721Base, PrimarySale, SignatureMintERC721, SharedMetadataMulti, PermissionsEnumerable {
// @dev Max number of limited edition NFTs that can be minted
uint256 public constant MAX_LIMITED_EDITIONS = 30;
// @dev Count of limited edition NFTs that have been minted
uint256 public limitedEditionMintedCount;
string public constant LIMITED_EDITION_FLAG = "vip";
/// @dev Only transfers to or from TRANSFER_ROLE holders are valid, when transfers are restricted.
bytes32 private transferRole;
/// @dev Only MINTER_ROLE holders can sign off on `MintRequest`s and update the shared metadata of tokens
bytes32 private minterRole;
/*//////////////////////////////////////////////////////////////
Constructor
//////////////////////////////////////////////////////////////*/
constructor(
address _defaultAdmin,
string memory _name,
string memory _symbol,
address _royaltyRecipient,
uint128 _royaltyBps,
address _primarySaleRecipient
) ERC721Base(_defaultAdmin, _name, _symbol, _royaltyRecipient, _royaltyBps) {
bytes32 _transferRole = keccak256("TRANSFER_ROLE");
bytes32 _minterRole = keccak256("MINTER_ROLE");
_setupRole(DEFAULT_ADMIN_ROLE, _defaultAdmin);
_setupRole(_minterRole, _defaultAdmin);
_setupRole(_transferRole, _defaultAdmin);
_setupRole(_transferRole, address(0));
transferRole = _transferRole;
minterRole = _minterRole;
_setupPrimarySaleRecipient(_primarySaleRecipient);
limitedEditionMintedCount = 0;
}
/*//////////////////////////////////////////////////////////////
Signature minting logic
//////////////////////////////////////////////////////////////*/
/**
* @notice Mints tokens according to the provided mint request.
*
* @param _req The payload / mint request.
* @param _signature The signature produced by an account signing the mint request.
*/
function mintWithSignature(
MintRequest calldata _req,
bytes calldata _signature
) external payable virtual override returns (address signer) {
require(_req.quantity == 1, "quantity must be 1");
uint256 tokenIdToMint = nextTokenIdToMint();
// Verify and process payload.
signer = _processRequest(_req, _signature);
// Convert string to bytes for comparison
bytes memory reqUriBytes = bytes(_req.uri);
bytes memory limitedEditionFlagBytes = bytes(LIMITED_EDITION_FLAG);
// Check if the _req.uri starts with LIMITED_EDITION_FLAG
bool isVIP = false;
if (reqUriBytes.length >= limitedEditionFlagBytes.length) {
isVIP = true;
for (uint i = 0; i < limitedEditionFlagBytes.length; i++) {
if (reqUriBytes[i] != limitedEditionFlagBytes[i]) {
isVIP = false;
break;
}
}
}
if (isVIP) {
// Ensure we do not exceed the defined number of limited editions
require(limitedEditionMintedCount < MAX_LIMITED_EDITIONS, "Limited edition cap reached");
isLimitedEdition[tokenIdToMint] = true;
limitedEditionMintedCount += _req.quantity; // Update the count of limited edition NFTs
}
address receiver = _req.to;
// Collect price
_collectPriceOnClaim(_req.primarySaleRecipient, _req.quantity, _req.currency, _req.pricePerToken);
// Set royalties, if applicable.
if (_req.royaltyRecipient != address(0) && _req.royaltyBps != 0) {
_setupRoyaltyInfoForToken(tokenIdToMint, _req.royaltyRecipient, _req.royaltyBps);
}
// Mint tokens.
_safeMint(receiver, _req.quantity);
emit TokensMintedWithSignature(signer, receiver, tokenIdToMint, _req);
}
/*///////////////////////////////////////////////////////////////
ERC 165 / 721 / 2981 logic
//////////////////////////////////////////////////////////////*/
/// @dev Returns the URI for a given tokenId.
function tokenURI(uint256 _tokenId) public view virtual override(ERC721A, IERC721Metadata) returns (string memory) {
if (!_exists(_tokenId)) {
revert("!ID");
}
return _getURIFromSharedMetadata(_tokenId);
}
/// @dev The start token ID for the contract.
function _startTokenId() internal pure override returns (uint256) {
return 1;
}
function startTokenId() public pure returns (uint256) {
return _startTokenId();
}
/*//////////////////////////////////////////////////////////////
Internal functions
//////////////////////////////////////////////////////////////*/
/// @dev Returns whether a given address is authorized to sign mint requests.
function _canSignMintRequest(address _signer) internal view override returns (bool) {
return hasRole(minterRole, _signer);
}
/// @dev Checks whether primary sale recipient can be set in the given execution context.
function _canSetPrimarySaleRecipient() internal view override returns (bool) {
return hasRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
/// @dev Checks whether owner can be set in the given execution context.
function _canSetOwner() internal view override returns (bool) {
return hasRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
/// @dev Checks whether royalty info can be set in the given execution context.
function _canSetRoyaltyInfo() internal view override returns (bool) {
return hasRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
/// @dev Checks whether contract metadata can be set in the given execution context.
function _canSetContractURI() internal view override returns (bool) {
return hasRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
/// @dev Returns whether a given address is authorized to set metadata
function _canSetSharedMetadata() internal view virtual override returns (bool) {
return hasRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
/// @dev Returns whether a token can be minted in the given execution context.
function _canMint() internal view virtual override returns (bool) {
return msg.sender == owner();
}
/// @dev Collects and distributes the primary sale value of NFTs being claimed.
function _collectPriceOnClaim(
address _primarySaleRecipient,
uint256 _quantityToClaim,
address _currency,
uint256 _pricePerToken
) internal virtual {
if (_pricePerToken == 0) {
require(msg.value == 0, "!Value");
return;
}
uint256 totalPrice = _quantityToClaim * _pricePerToken;
bool validMsgValue;
if (_currency == CurrencyTransferLib.NATIVE_TOKEN) {
validMsgValue = msg.value == totalPrice;
} else {
validMsgValue = msg.value == 0;
}
require(validMsgValue, "Invalid msg value");
address saleRecipient = _primarySaleRecipient == address(0) ? primarySaleRecipient() : _primarySaleRecipient;
CurrencyTransferLib.transferCurrency(_currency, msg.sender, saleRecipient, totalPrice);
}
/// @dev See {ERC721-_beforeTokenTransfer}.
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId_,
uint256 quantity
) internal virtual override {
super._beforeTokenTransfers(from, to, startTokenId_, quantity);
// if transfer is restricted on the contract, we still want to allow burning and minting
if (!hasRole(transferRole, address(0)) && from != address(0) && to != address(0)) {
if (!hasRole(transferRole, from) && !hasRole(transferRole, to)) {
revert("!T");
}
}
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;
/* solhint-disable quotes */
/// @author thirdweb
/// credits: Zora
import "@thirdweb-dev/contracts/lib/Strings.sol";
import "@thirdweb-dev/contracts/external-deps/openzeppelin/utils/Base64.sol";
/// NFT metadata library for rendering metadata associated with editions
library NFTMetadataRenderer {
/**
* @notice Generate edition metadata from storage information as base64-json blob
* @dev Combines the media data and metadata
* @param name Name of NFT in metadata
* @param description Description of NFT in metadata
* @param imageURI URI of image to render for edition
* @param animationURI URI of animation to render for edition
* @param tokenOfEdition Token ID for specific token
*/
function createMetadataEdition(
string memory name,
string memory description,
string memory imageURI,
string memory animationURI,
string memory vrmURI,
string memory status,
uint256 tokenOfEdition
) internal pure returns (string memory) {
string memory _tokenMediaData = tokenMediaData(imageURI, animationURI, vrmURI);
bytes memory json = createMetadataJSON(name, description, _tokenMediaData, status, tokenOfEdition);
return encodeMetadataJSON(json);
}
/**
* @param name Name of NFT in metadata
* @param description Description of NFT in metadata
* @param mediaData Data for media to include in json object
* @param tokenOfEdition Token ID for specific token
*/
function createMetadataJSON(
string memory name,
string memory description,
string memory mediaData,
string memory status,
uint256 tokenOfEdition
) internal pure returns (bytes memory) {
return
abi.encodePacked(
'{"name": "',
name,
" no.",
Strings.toString(tokenOfEdition),
'", "',
'description": "',
description,
'", "',
mediaData,
'properties": {"number": "',
Strings.toString(tokenOfEdition),
'", "status": "',
status,
'"}}'
);
}
/// Encodes the argument json bytes into base64-data uri format
/// @param json Raw json to base64 and turn into a data-uri
function encodeMetadataJSON(bytes memory json) internal pure returns (string memory) {
return string(abi.encodePacked("data:application/json;base64,", Base64.encode(json)));
}
/// Generates edition metadata from storage information as base64-json blob
/// Combines the media data and metadata
/// @param imageUrl URL of image to render for edition
/// @param animationUrl URL of animation to render for edition
function tokenMediaData(string memory imageUrl, string memory animationUrl, string memory vrmUrl) internal pure returns (string memory) {
bool hasImage = bytes(imageUrl).length > 0;
bool hasAnimation = bytes(animationUrl).length > 0;
bool hasVrm = bytes(vrmUrl).length > 0;
if (hasImage && hasAnimation && hasVrm) {
return string(abi.encodePacked('image": "', imageUrl, '", "animation_url": "', animationUrl, '", "vrm_url": "', vrmUrl, '", "'));
}
if (hasImage && hasVrm) {
return string(abi.encodePacked('image": "', imageUrl, '", "vrm_url": "', vrmUrl, '", "'));
}
if (hasImage && hasAnimation) {
return string(abi.encodePacked('image": "', imageUrl, '", "animation_url": "', animationUrl, '", "'));
}
if (hasImage) {
return string(abi.encodePacked('image": "', imageUrl, '", "'));
}
if (hasAnimation) {
return string(abi.encodePacked('animation_url": "', animationUrl, '", "'));
}
return "";
}
}
pragma solidity ^0.8.10;
import "./NFTMetadataRenderer.sol";
import "@thirdweb-dev/contracts/eip/interface/IERC4906.sol";
abstract contract SharedMetadataMulti is IERC4906 {
event SharedMetadataUpdated(bool isLimitedEdition, string name, string description, string imageURI, string animationURI, string vrmURI);
struct SharedMetadataInfo {
string name;
string description;
string imageURI;
string animationURI;
string vrmURI;
}
/// @dev Mapping to track limited edition token IDs
mapping(uint256 => bool) public isLimitedEdition;
/// @notice Token metadata information for limited editions
SharedMetadataInfo public limitedEditionMetadata;
/// @notice Token metadata information for open editions
SharedMetadataInfo public defaultMetadata;
/// @notice Set shared metadata for NFTs 1 to 30
function setLimitedEditionMetadata(SharedMetadataInfo calldata _metadata) external virtual {
if (!_canSetSharedMetadata()) {
revert("Not authorized");
}
limitedEditionMetadata = _metadata;
emit BatchMetadataUpdate(0, type(uint256).max);
emit SharedMetadataUpdated({
isLimitedEdition: true,
name: _metadata.name,
description: _metadata.description,
imageURI: _metadata.imageURI,
animationURI: _metadata.animationURI,
vrmURI: _metadata.vrmURI
});
}
/// @notice Set shared metadata for NFTs other than 1 to 30
function setDefaultMetadata(SharedMetadataInfo calldata _metadata) external virtual {
if (!_canSetSharedMetadata()) {
revert("Not authorized");
}
defaultMetadata = _metadata;
emit BatchMetadataUpdate(0, type(uint256).max);
emit SharedMetadataUpdated({
isLimitedEdition: false,
name: _metadata.name,
description: _metadata.description,
imageURI: _metadata.imageURI,
animationURI: _metadata.animationURI,
vrmURI: _metadata.vrmURI
});
}
function _getURIFromSharedMetadata(uint256 tokenId) internal view returns (string memory) {
SharedMetadataInfo memory info = isLimitedEdition[tokenId] ? limitedEditionMetadata : defaultMetadata;
return NFTMetadataRenderer.createMetadataEdition({
name: info.name,
description: info.description,
imageURI: info.imageURI,
animationURI: info.animationURI,
vrmURI: info.vrmURI,
status: isLimitedEdition[tokenId] ? "VIP Member" : "Regular Member",
tokenOfEdition: tokenId
});
}
/// @dev Returns whether shared metadata can be set in the given execution context.
function _canSetSharedMetadata() internal view virtual returns (bool); // Ensured virtual is here for override
}