Contract Name:
FLOFEDividendTracker
Contract Source Code:
File 1 of 1 : FLOFEDividendTracker
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library IterableMapping {
// Iterable mapping from address to uint;
struct Map {
address[] keys;
mapping(address => uint256) values;
mapping(address => uint256) indexOf;
mapping(address => bool) inserted;
}
function get(Map storage map, address key) public view returns (uint256) {
return map.values[key];
}
function getIndexOfKey(Map storage map, address key)
public
view
returns (int256)
{
if (!map.inserted[key]) {
return -1;
}
return int256(map.indexOf[key]);
}
function getKeyAtIndex(Map storage map, uint256 index)
public
view
returns (address)
{
return map.keys[index];
}
function size(Map storage map) public view returns (uint256) {
return map.keys.length;
}
function set(
Map storage map,
address key,
uint256 val
) public {
if (map.inserted[key]) {
map.values[key] = val;
} else {
map.inserted[key] = true;
map.values[key] = val;
map.indexOf[key] = map.keys.length;
map.keys.push(key);
}
}
function remove(Map storage map, address key) public {
if (!map.inserted[key]) {
return;
}
delete map.inserted[key];
delete map.values[key];
uint256 index = map.indexOf[key];
uint256 lastIndex = map.keys.length - 1;
address lastKey = map.keys[lastIndex];
map.indexOf[lastKey] = index;
delete map.indexOf[key];
map.keys[index] = lastKey;
map.keys.pop();
}
}
interface IFTPAntiBot {
// Here we create the interface to interact with AntiBot
function scanAddress(
address _address,
address _safeAddress,
address _origin
) external returns (bool);
function registerBlock(address _recipient, address _sender) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface DividendPayingTokenInterface {
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function dividendOf(address _owner) external view returns (uint256);
/// @notice Distributes ether to token holders as dividends.
/// @dev SHOULD distribute the paid ether to token holders as dividends.
/// SHOULD NOT directly transfer ether to token holders in this function.
/// MUST emit a `DividendsDistributed` event when the amount of distributed ether is greater than 0.
function distributeDividends() external payable;
/// @notice Withdraws the ether distributed to the sender.
/// @dev SHOULD transfer `dividendOf(msg.sender)` wei to `msg.sender`, and `dividendOf(msg.sender)` SHOULD be 0 after the transfer.
/// MUST emit a `DividendWithdrawn` event if the amount of ether transferred is greater than 0.
function withdrawDividend() external;
/// @dev This event MUST emit when ether is distributed to token holders.
/// @param from The address which sends ether to this contract.
/// @param weiAmount The amount of distributed ether in wei.
event DividendsDistributed(address indexed from, uint256 weiAmount);
/// @dev This event MUST emit when an address withdraws their dividend.
/// @param to The address which withdraws ether from this contract.
/// @param weiAmount The amount of withdrawn ether in wei.
event DividendWithdrawn(
address indexed to,
uint256 weiAmount,
address received
);
}
interface DividendPayingTokenOptionalInterface {
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function withdrawableDividendOf(address _owner)
external
view
returns (uint256);
/// @notice View the amount of dividend in wei that an address has withdrawn.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has withdrawn.
function withdrawnDividendOf(address _owner)
external
view
returns (uint256);
/// @notice View the amount of dividend in wei that an address has earned in total.
/// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has earned in total.
function accumulativeDividendOf(address _owner)
external
view
returns (uint256);
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() public {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount)
public
virtual
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(
amount,
"ERC20: transfer amount exceeds balance"
);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(
amount,
"ERC20: burn amount exceeds balance"
);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
contract DividendPayingToken is
ERC20,
DividendPayingTokenInterface,
DividendPayingTokenOptionalInterface
{
using SafeMath for uint256;
using SafeMathUint for uint256;
using SafeMathInt for int256;
// With `magnitude`, we can properly distribute dividends even if the amount of received ether is small.
// For more discussion about choosing the value of `magnitude`,
// see https://github.com/ethereum/EIPs/issues/1726#issuecomment-472352728
uint256 internal constant magnitude = 2**128;
uint256 internal magnifiedDividendPerShare;
// About dividendCorrection:
// If the token balance of a `_user` is never changed, the dividend of `_user` can be computed with:
// `dividendOf(_user) = dividendPerShare * balanceOf(_user)`.
// When `balanceOf(_user)` is changed (via minting/burning/transferring tokens),
// `dividendOf(_user)` should not be changed,
// but the computed value of `dividendPerShare * balanceOf(_user)` is changed.
// To keep the `dividendOf(_user)` unchanged, we add a correction term:
// `dividendOf(_user) = dividendPerShare * balanceOf(_user) + dividendCorrectionOf(_user)`,
// where `dividendCorrectionOf(_user)` is updated whenever `balanceOf(_user)` is changed:
// `dividendCorrectionOf(_user) = dividendPerShare * (old balanceOf(_user)) - (new balanceOf(_user))`.
// So now `dividendOf(_user)` returns the same value before and after `balanceOf(_user)` is changed.
mapping(address => int256) internal magnifiedDividendCorrections;
mapping(address => uint256) internal withdrawnDividends;
uint256 public totalDividendsDistributed;
constructor(string memory _name, string memory _symbol)
public
ERC20(_name, _symbol)
{}
/// @dev Distributes dividends whenever ether is paid to this contract.
receive() external payable {
distributeDividends();
}
/// @notice Distributes ether to token holders as dividends.
/// @dev It reverts if the total supply of tokens is 0.
/// It emits the `DividendsDistributed` event if the amount of received ether is greater than 0.
/// About undistributed ether:
/// In each distribution, there is a small amount of ether not distributed,
/// the magnified amount of which is
/// `(msg.value * magnitude) % totalSupply()`.
/// With a well-chosen `magnitude`, the amount of undistributed ether
/// (de-magnified) in a distribution can be less than 1 wei.
/// We can actually keep track of the undistributed ether in a distribution
/// and try to distribute it in the next distribution,
/// but keeping track of such data on-chain costs much more than
/// the saved ether, so we don't do that.
function distributeDividends() public payable override {
require(totalSupply() > 0);
if (msg.value > 0) {
magnifiedDividendPerShare = magnifiedDividendPerShare.add(
(msg.value).mul(magnitude) / totalSupply()
);
emit DividendsDistributed(msg.sender, msg.value);
totalDividendsDistributed = totalDividendsDistributed.add(
msg.value
);
}
}
/// @notice Withdraws the ether distributed to the sender.
/// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
function withdrawDividend() public virtual override {
_withdrawDividendOfUser(msg.sender, msg.sender);
}
/// @notice Withdraws the ether distributed to the sender.
/// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
function _withdrawDividendOfUser(address payable user, address payable to)
internal
returns (uint256)
{
uint256 _withdrawableDividend = withdrawableDividendOf(user);
if (_withdrawableDividend > 0) {
withdrawnDividends[user] = withdrawnDividends[user].add(
_withdrawableDividend
);
emit DividendWithdrawn(user, _withdrawableDividend, to);
(bool success, ) = to.call{value: _withdrawableDividend}("");
if (!success) {
withdrawnDividends[user] = withdrawnDividends[user].sub(
_withdrawableDividend
);
return 0;
}
return _withdrawableDividend;
}
return 0;
}
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function dividendOf(address _owner) public view override returns (uint256) {
return withdrawableDividendOf(_owner);
}
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function withdrawableDividendOf(address _owner)
public
view
override
returns (uint256)
{
return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
}
/// @notice View the amount of dividend in wei that an address has withdrawn.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has withdrawn.
function withdrawnDividendOf(address _owner)
public
view
override
returns (uint256)
{
return withdrawnDividends[_owner];
}
/// @notice View the amount of dividend in wei that an address has earned in total.
/// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
/// = (magnifiedDividendPerShare * balanceOf(_owner) + magnifiedDividendCorrections[_owner]) / magnitude
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has earned in total.
function accumulativeDividendOf(address _owner)
public
view
override
returns (uint256)
{
return
magnifiedDividendPerShare
.mul(balanceOf(_owner))
.toInt256Safe()
.add(magnifiedDividendCorrections[_owner])
.toUint256Safe() / magnitude;
}
/// @dev Internal function that mints tokens to an account.
/// Update magnifiedDividendCorrections to keep dividends unchanged.
/// @param account The account that will receive the created tokens.
/// @param value The amount that will be created.
function _mint(address account, uint256 value) internal override {
super._mint(account, value);
magnifiedDividendCorrections[account] = magnifiedDividendCorrections[
account
].sub((magnifiedDividendPerShare.mul(value)).toInt256Safe());
}
/// @dev Internal function that burns an amount of the token of a given account.
/// Update magnifiedDividendCorrections to keep dividends unchanged.
/// @param account The account whose tokens will be burnt.
/// @param value The amount that will be burnt.
function _burn(address account, uint256 value) internal override {
super._burn(account, value);
magnifiedDividendCorrections[account] = magnifiedDividendCorrections[
account
].add((magnifiedDividendPerShare.mul(value)).toInt256Safe());
}
function _setBalance(address account, uint256 newBalance) internal {
uint256 currentBalance = balanceOf(account);
if (newBalance > currentBalance) {
uint256 mintAmount = newBalance.sub(currentBalance);
_mint(account, mintAmount);
} else if (newBalance < currentBalance) {
uint256 burnAmount = currentBalance.sub(newBalance);
_burn(account, burnAmount);
}
}
function getAccount(address _account)
public
view
returns (uint256 _withdrawableDividends, uint256 _withdrawnDividends)
{
_withdrawableDividends = withdrawableDividendOf(_account);
_withdrawnDividends = withdrawnDividends[_account];
}
}
contract FLOFEDividendTracker is DividendPayingToken, Ownable {
using SafeMath for uint256;
using SafeMathInt for int256;
using IterableMapping for IterableMapping.Map;
IterableMapping.Map private tokenHoldersMap;
mapping(address => bool) public excludedFromDividends;
uint256 public minimumTokenBalanceForDividends;
event ExcludeFromDividends(address indexed account);
constructor()
public
DividendPayingToken(
"FLOFE_Dividend_Tracker",
"FLOFE_Dividend_Tracker"
)
{
minimumTokenBalanceForDividends = 200000 * (10**18); //must hold 200000+ tokens
}
function _approve(
address,
address,
uint256
) internal override {
require(false, "FLOFE_Dividend_Tracker: No approvals allowed");
}
function _transfer(
address,
address,
uint256
) internal override {
require(false, "FLOFE_Dividend_Tracker: No transfers allowed");
}
function withdrawDividend() public override {
require(
false,
"FLOFE_Dividend_Tracker: withdrawDividend disabled. Use the 'claim' function on the main FLOFE contract."
);
}
function excludeFromDividends(address account) external onlyOwner {
require(!excludedFromDividends[account]);
excludedFromDividends[account] = true;
_setBalance(account, 0);
tokenHoldersMap.remove(account);
emit ExcludeFromDividends(account);
}
function getNumberOfTokenHolders() external view returns (uint256) {
return tokenHoldersMap.keys.length;
}
function setBalance(address payable account, uint256 newBalance)
external
onlyOwner
{
if (excludedFromDividends[account]) {
return;
}
if (newBalance >= minimumTokenBalanceForDividends) {
_setBalance(account, newBalance);
tokenHoldersMap.set(account, newBalance);
} else {
_setBalance(account, 0);
tokenHoldersMap.remove(account);
}
}
function processAccount(address payable account, address payable toAccount)
public
onlyOwner
returns (uint256)
{
uint256 amount = _withdrawDividendOfUser(account, toAccount);
return amount;
}
}
contract FLOFE is ERC20, Ownable {
using SafeMath for uint256;
IFTPAntiBot private antiBot;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private swapping;
bool private reinvesting;
bool public antibotEnabled = false;
bool public maxPurchaseEnabled = true;
FLOFEDividendTracker public dividendTracker;
address payable public devAddress =
0x83989FAD201247446294caCB363220ecfffCB6b0;
uint256 public ethFee = 6;
uint256 public devFee = 9;
uint256 public totalFee = 15;
uint256 public tradingStartTime = 1629207000;
uint256 minimumTokenBalanceForDividends = 200000 * (10**18);
//maximum purchase amount for initial launch
uint256 maxPurchaseAmount = 5000000 * (10**18);
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
// addresses that can make transfers before presale is over
mapping(address => bool) public canTransferBeforeTradingIsEnabled;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
// the last time an address transferred
// used to detect if an account can be reinvest inactive funds to the vault
mapping(address => uint256) public lastTransfer;
event UpdateDividendTracker(
address indexed newAddress,
address indexed oldAddress
);
event UpdateUniswapV2Router(
address indexed newAddress,
address indexed oldAddress
);
event ExcludeFromFees(address indexed account, bool isExcluded);
event ExcludeMultipleAccountsFromFees(address[] accounts, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event SendDividends(uint256 amount);
event DividendClaimed(
uint256 ethAmount,
uint256 tokenAmount,
address account
);
constructor() public ERC20("Floki Wife", "FLOFE") {
IFTPAntiBot _antiBot = IFTPAntiBot(
0x590C2B20f7920A2D21eD32A21B616906b4209A43
);
antiBot = _antiBot;
dividendTracker = new FLOFEDividendTracker();
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
// Create a uniswap pair for this new token
address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = _uniswapV2Pair;
_setAutomatedMarketMakerPair(_uniswapV2Pair, true);
// exclude from receiving dividends
dividendTracker.excludeFromDividends(address(dividendTracker));
dividendTracker.excludeFromDividends(address(this));
dividendTracker.excludeFromDividends(owner());
dividendTracker.excludeFromDividends(address(_uniswapV2Router));
// exclude from paying fees or having max transaction amount
excludeFromFees(address(this), true);
excludeFromFees(owner(), true);
// enable owner and fixed-sale wallet to send tokens before presales are over
canTransferBeforeTradingIsEnabled[owner()] = true;
_mint(owner(), 1000000000 * (10**18));
}
receive() external payable {}
function setTradingStartTime(uint256 newStartTime) public onlyOwner {
require(
tradingStartTime > block.timestamp,
"Trading has already started"
);
require(
newStartTime > block.timestamp,
"Start time must be in the future"
);
tradingStartTime = newStartTime;
}
function updateDividendTracker(address newAddress) public onlyOwner {
require(
newAddress != address(dividendTracker),
"FLOFE: The dividend tracker already has that address"
);
FLOFEDividendTracker newDividendTracker = FLOFEDividendTracker(
payable(newAddress)
);
require(
newDividendTracker.owner() == address(this),
"FLOFE: The new dividend tracker must be owned by the FLOFE token contract"
);
newDividendTracker.excludeFromDividends(address(newDividendTracker));
newDividendTracker.excludeFromDividends(address(this));
newDividendTracker.excludeFromDividends(owner());
newDividendTracker.excludeFromDividends(address(uniswapV2Router));
emit UpdateDividendTracker(newAddress, address(dividendTracker));
dividendTracker = newDividendTracker;
}
function updateUniswapV2Router(address newAddress) public onlyOwner {
require(
newAddress != address(uniswapV2Router),
"FLOFE: The router already has that address"
);
emit UpdateUniswapV2Router(newAddress, address(uniswapV2Router));
uniswapV2Router = IUniswapV2Router02(newAddress);
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
require(
_isExcludedFromFees[account] != excluded,
"FLOFE: Account is already the value of 'excluded'"
);
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function excludeMultipleAccountsFromFees(
address[] memory accounts,
bool excluded
) public onlyOwner {
for (uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFees[accounts[i]] = excluded;
}
emit ExcludeMultipleAccountsFromFees(accounts, excluded);
}
function setAutomatedMarketMakerPair(address pair, bool value)
public
onlyOwner
{
require(
pair != uniswapV2Pair,
"FLOFE: The UniSwap pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
require(
automatedMarketMakerPairs[pair] != value,
"FLOFE: Automated market maker pair is already set to that value"
);
automatedMarketMakerPairs[pair] = value;
if (value) {
dividendTracker.excludeFromDividends(pair);
}
emit SetAutomatedMarketMakerPair(pair, value);
}
function allowPreTrading(address account, bool allowed) public onlyOwner {
// used for owner and pre sale addresses
require(
canTransferBeforeTradingIsEnabled[account] != allowed,
"FLOFE: Pre trading is already the value of 'excluded'"
);
canTransferBeforeTradingIsEnabled[account] = allowed;
}
function setMaxPurchaseEnabled(bool enabled) public onlyOwner {
require(
maxPurchaseEnabled != enabled,
"FLOFE: Max purchase enabled is already the value of 'enabled'"
);
maxPurchaseEnabled = enabled;
}
function setMaxPurchaseAmount(uint256 newAmount) public onlyOwner {
maxPurchaseAmount = newAmount;
}
function updateDevAddress(address payable newAddress) public onlyOwner {
devAddress = newAddress;
}
function getTotalDividendsDistributed() external view returns (uint256) {
return dividendTracker.totalDividendsDistributed();
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
function withdrawableDividendOf(address account)
public
view
returns (uint256)
{
return dividendTracker.withdrawableDividendOf(account);
}
function dividendTokenBalanceOf(address account)
public
view
returns (uint256)
{
return dividendTracker.balanceOf(account);
}
function reinvestInactive(address payable account) public onlyOwner {
uint256 tokenBalance = dividendTracker.balanceOf(account);
require(
tokenBalance <= minimumTokenBalanceForDividends,
"FLOFE: Account balance must be less then minimum token balance for dividends"
);
uint256 _lastTransfer = lastTransfer[account];
require(
block.timestamp.sub(_lastTransfer) > 12 weeks,
"FLOFE: Account must have been inactive for at least 12 weeks"
);
dividendTracker.processAccount(account, address(this));
uint256 dividends = address(this).balance;
(bool success, ) = address(dividendTracker).call{value: dividends}("");
if (success) {
emit SendDividends(dividends);
try dividendTracker.setBalance(account, 0) {} catch {}
}
}
function claim(bool reinvest, uint256 minTokens) external {
_claim(msg.sender, reinvest, minTokens);
}
function _claim(
address payable account,
bool reinvest,
uint256 minTokens
) private {
uint256 withdrawableAmount = dividendTracker.withdrawableDividendOf(
account
);
require(
withdrawableAmount > 0,
"FLOFE: Claimer has no withdrawable dividend"
);
if (!reinvest) {
uint256 ethAmount = dividendTracker.processAccount(
account,
account
);
if (ethAmount > 0) {
emit DividendClaimed(ethAmount, 0, account);
}
return;
}
uint256 ethAmount = dividendTracker.processAccount(
account,
address(this)
);
if (ethAmount > 0) {
reinvesting = true;
uint256 tokenAmount = swapEthForTokens(
ethAmount,
minTokens,
account
);
reinvesting = false;
emit DividendClaimed(ethAmount, tokenAmount, account);
}
}
function getNumberOfDividendTokenHolders() external view returns (uint256) {
return dividendTracker.getNumberOfTokenHolders();
}
function getAccount(address _account)
public
view
returns (
uint256 withdrawableDividends,
uint256 withdrawnDividends,
uint256 balance
)
{
(withdrawableDividends, withdrawnDividends) = dividendTracker
.getAccount(_account);
return (withdrawableDividends, withdrawnDividends, balanceOf(_account));
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
// address must be permitted to transfer before tradingStartTime
if (tradingStartTime > block.timestamp) {
require(
canTransferBeforeTradingIsEnabled[from],
"FLOFE: This account cannot send tokens until trading is enabled"
);
}
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (antibotEnabled) {
if (automatedMarketMakerPairs[from]) {
require(
!antiBot.scanAddress(to, from, tx.origin),
"Beep Beep Boop, You're a piece of poop"
);
}
if (automatedMarketMakerPairs[to]) {
require(
!antiBot.scanAddress(from, to, tx.origin),
"Beep Beep Boop, You're a piece of poop"
);
}
}
// make sure amount does not exceed max on a purchase
if (maxPurchaseEnabled && automatedMarketMakerPairs[from]) {
require(
amount <= maxPurchaseAmount,
"FLOFE: Exceeds max purchase amount"
);
}
if (
!swapping &&
!reinvesting &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapAndDistribute();
swapping = false;
}
bool takeFee = !swapping && !reinvesting;
// if any account belongs to _isExcludedFromFee account then remove the fee
// don't take a fee unless it's a buy / sell
if (
(_isExcludedFromFees[from] || _isExcludedFromFees[to]) ||
(!automatedMarketMakerPairs[from] && !automatedMarketMakerPairs[to])
) {
takeFee = false;
}
if (takeFee) {
uint256 fees = amount.mul(totalFee).div(100);
amount = amount.sub(fees);
super._transfer(from, address(this), fees);
}
super._transfer(from, to, amount);
try
dividendTracker.setBalance(payable(from), balanceOf(from))
{} catch {}
try dividendTracker.setBalance(payable(to), balanceOf(to)) {} catch {}
if (antibotEnabled) {
try antiBot.registerBlock(from, to) {} catch {}
}
lastTransfer[from] = block.timestamp;
lastTransfer[to] = block.timestamp;
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function swapEthForTokens(
uint256 ethAmount,
uint256 minTokens,
address account
) internal returns (uint256) {
address[] memory path = new address[](2);
path[0] = uniswapV2Router.WETH();
path[1] = address(this);
uint256 balanceBefore = balanceOf(account);
uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{
value: ethAmount
}(minTokens, path, account, block.timestamp);
uint256 tokenAmount = balanceOf(account).sub(balanceBefore);
return tokenAmount;
}
function swapAndDistribute() private {
uint256 tokenBalance = balanceOf(address(this));
swapTokensForEth(tokenBalance);
uint256 ethBalance = address(this).balance;
uint256 devPortion = ethBalance.mul(devFee).div(totalFee);
devAddress.transfer(devPortion);
uint256 dividends = address(this).balance;
(bool success, ) = address(dividendTracker).call{value: dividends}("");
if (success) {
emit SendDividends(dividends);
}
}
function assignAntiBot(address _address) external onlyOwner {
IFTPAntiBot _antiBot = IFTPAntiBot(_address);
antiBot = _antiBot;
}
function toggleAntiBot() external onlyOwner {
if (antibotEnabled) {
antibotEnabled = false;
} else {
antibotEnabled = true;
}
}
function getDay() internal view returns (uint256) {
return block.timestamp.div(1 days);
}
}