Contract Name:
EightPayToken
Contract Source Code:
pragma solidity 0.5.16;
import { IERC20 } from "./IERC20.sol";
import { Context } from "./Context.sol";
import { SafeMath } from "./SafeMath.sol";
import { Ownable } from "./Ownable.sol";
import { LGEWhitelisted } from "./LGEWhitelisted.sol";
contract EightPayToken is Context, IERC20, Ownable, LGEWhitelisted {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
uint8 private _decimals;
string private _symbol;
string private _name;
constructor() public {
_name = "8PAY Network";
_symbol = "8PAY";
_decimals = 18;
_totalSupply = 88888888 * 10 ** 18;
_balances[_msgSender()] = _totalSupply;
emit Transfer(address(0), _msgSender(), _totalSupply);
}
/**
* @dev Returns the token owner.
*/
function getOwner() external view returns (address) {
return owner();
}
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev See {ERC20-totalSupply}.
*/
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {ERC20-balanceOf}.
*/
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
/**
* @dev See {ERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {ERC20-allowance}.
*/
function allowance(address owner, address spender) external view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {ERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {ERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {ERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) external returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {ERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) external returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_applyLGEWhitelist(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
pragma solidity 0.5.16;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity 0.5.16;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity 0.5.16;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity 0.5.16;
import { Context } from "./Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() external onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) external onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity 0.5.16;
import { Context } from "./Context.sol";
import { SafeMath } from "./SafeMath.sol";
contract LGEWhitelisted is Context {
using SafeMath for uint256;
struct WhitelistRound {
uint256 duration;
uint256 amountMax;
mapping(address => bool) addresses;
mapping(address => uint256) purchased;
}
WhitelistRound[] public _lgeWhitelistRounds;
uint256 public _lgeTimestamp;
address public _lgePairAddress;
address public _whitelister;
event WhitelisterTransferred(address indexed previousWhitelister, address indexed newWhitelister);
constructor () internal {
_whitelister = _msgSender();
}
modifier onlyWhitelister() {
require(_whitelister == _msgSender(), "Caller is not the whitelister");
_;
}
function renounceWhitelister() external onlyWhitelister {
emit WhitelisterTransferred(_whitelister, address(0));
_whitelister = address(0);
}
function transferWhitelister(address newWhitelister) external onlyWhitelister {
_transferWhitelister(newWhitelister);
}
function _transferWhitelister(address newWhitelister) internal {
require(newWhitelister != address(0), "New whitelister is the zero address");
emit WhitelisterTransferred(_whitelister, newWhitelister);
_whitelister = newWhitelister;
}
/*
* createLGEWhitelist - Call this after initial Token Generation Event (TGE)
*
* pairAddress - address generated from createPair() event on DEX
* durations - array of durations (seconds) for each whitelist rounds
* amountsMax - array of max amounts (TOKEN decimals) for each whitelist round
*
*/
function createLGEWhitelist(address pairAddress, uint256[] calldata durations, uint256[] calldata amountsMax) external onlyWhitelister() {
require(durations.length == amountsMax.length, "Invalid whitelist(s)");
_lgePairAddress = pairAddress;
if(durations.length > 0) {
delete _lgeWhitelistRounds;
for (uint256 i = 0; i < durations.length; i++) {
_lgeWhitelistRounds.push(WhitelistRound(durations[i], amountsMax[i]));
}
}
}
/*
* modifyLGEWhitelistAddresses - Define what addresses are included/excluded from a whitelist round
*
* index - 0-based index of round to modify whitelist
* duration - period in seconds from LGE event or previous whitelist round
* amountMax - max amount (TOKEN decimals) for each whitelist round
*
*/
function modifyLGEWhitelist(uint256 index, uint256 duration, uint256 amountMax, address[] calldata addresses, bool enabled) external onlyWhitelister() {
require(index < _lgeWhitelistRounds.length, "Invalid index");
require(amountMax > 0, "Invalid amountMax");
if(duration != _lgeWhitelistRounds[index].duration)
_lgeWhitelistRounds[index].duration = duration;
if(amountMax != _lgeWhitelistRounds[index].amountMax)
_lgeWhitelistRounds[index].amountMax = amountMax;
for (uint256 i = 0; i < addresses.length; i++) {
_lgeWhitelistRounds[index].addresses[addresses[i]] = enabled;
}
}
/*
* getLGEWhitelistRound
*
* returns:
*
* 1. whitelist round number ( 0 = no active round now )
* 2. duration, in seconds, current whitelist round is active for
* 3. timestamp current whitelist round closes at
* 4. maximum amount a whitelister can purchase in this round
* 5. is caller whitelisted
* 6. how much caller has purchased in current whitelist round
*
*/
function getLGEWhitelistRound() public view returns (uint256, uint256, uint256, uint256, bool, uint256) {
if(_lgeTimestamp > 0) {
uint256 wlCloseTimestampLast = _lgeTimestamp;
for (uint256 i = 0; i < _lgeWhitelistRounds.length; i++) {
WhitelistRound storage wlRound = _lgeWhitelistRounds[i];
wlCloseTimestampLast = wlCloseTimestampLast.add(wlRound.duration);
if(now <= wlCloseTimestampLast)
return (i.add(1), wlRound.duration, wlCloseTimestampLast, wlRound.amountMax, wlRound.addresses[_msgSender()], wlRound.purchased[_msgSender()]);
}
}
return (0, 0, 0, 0, false, 0);
}
/*
* _applyLGEWhitelist - internal function to be called initially before any transfers
*
*/
function _applyLGEWhitelist(address sender, address recipient, uint256 amount) internal {
if(_lgePairAddress == address(0) || _lgeWhitelistRounds.length == 0)
return;
if(_lgeTimestamp == 0 && sender != _lgePairAddress && recipient == _lgePairAddress && amount > 0)
_lgeTimestamp = now;
if(sender == _lgePairAddress && recipient != _lgePairAddress) {
//buying
(uint256 wlRoundNumber,,,,,) = getLGEWhitelistRound();
if(wlRoundNumber > 0) {
WhitelistRound storage wlRound = _lgeWhitelistRounds[wlRoundNumber.sub(1)];
require(wlRound.addresses[recipient], "LGE - Buyer is not whitelisted");
uint256 amountRemaining = 0;
if(wlRound.purchased[recipient] < wlRound.amountMax)
amountRemaining = wlRound.amountMax.sub(wlRound.purchased[recipient]);
require(amount <= amountRemaining, "LGE - Amount exceeds whitelist maximum");
wlRound.purchased[recipient] = wlRound.purchased[recipient].add(amount);
}
}
}
}