Token

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.19;

// interfaces
import {IERC20} from "@openzeppelin/[email protected]/token/ERC20/IERC20.sol";
import {IYieldToken} from "./interfaces/IYieldToken.sol";
import {IBaseToken} from "./interfaces/IBaseToken.sol";
import {ITranche} from "./interfaces/ITranche.sol";
// libs
import {SafeERC20Namer} from "./utils/SafeERC20Namer.sol";
// inheriting
import {ERC20Permit, ERC20} from "@openzeppelin/[email protected]/token/ERC20/extensions/ERC20Permit.sol";
import {BaseToken} from "./BaseToken.sol";

/// @title YieldToken
/// @notice YieldToken is a token that represents the future yield of a Target (yield-bearing asset).
///         It is minted when a user deposits into a Tranche and burned when the user redeems after maturity or when redeemed with PrincipalToken.
contract YieldToken is BaseToken, IYieldToken {
    uint8 private immutable uDecimals;

    address public immutable underlying;
    address public immutable override tranche;
    uint256 public immutable override(IBaseToken, BaseToken) maturity;
    address public immutable override(IBaseToken, BaseToken) target;

    modifier onlyTranche() {
        if (msg.sender != tranche) revert OnlyTranche();
        _;
    }

    /// @dev Assume YieldToken is deployed from a factory.
    /// The constructor is `payable` to remove msg.value check and reduce gas cost at deployment time.
    /// This is acceptable because the factory contract doesn't deploy Tranche with ETH.
    ///
    /// Cache Underlying token decimals in the constructor
    /// Deployer SHOULD ensure that zero check and validity check is performed before deployment.
    /// @param _tranche The address of the Tranche contract that mints this YieldToken
    /// @param _underlying Underlying token address (zero-check SHOULD be performed in the Tranche contract)
    /// @param _target Target token address  (zero-check SHOULD be performed in the Tranche contract)
    /// @param _maturity Maturity timestamp (SHOULD be checked in the Tranche contract)
    constructor(
        address _tranche,
        address _underlying,
        address _target,
        uint256 _maturity
    ) payable ERC20("Napier Yield Token", "eYT") ERC20Permit("Napier Yield Token") {
        underlying = _underlying;
        tranche = _tranche;
        maturity = _maturity;
        target = _target;
        uDecimals = ERC20(_underlying).decimals();
    }

    /* ================== MUTATIVE METHODS =================== */

    /// @inheritdoc IYieldToken
    function mint(address to, uint256 amount) external override onlyTranche {
        _mint(to, amount);
    }

    /// @inheritdoc IYieldToken
    function burn(address owner, uint256 amount) external override onlyTranche {
        _burn(owner, amount);
    }

    /// @inheritdoc IYieldToken
    function burnFrom(address owner, address spender, uint256 amount) external override onlyTranche {
        if (owner != spender) {
            _spendAllowance(owner, spender, amount);
        }
        _burn(owner, amount);
    }

    /// @inheritdoc ERC20
    /// @notice This function reverts if Tranche is paused.
    /// NOTE: This function is overridden to ensure that `msg.sender`'s and `to`'s unclaimed yields is updated.
    function transfer(address to, uint256 amount) public override(ERC20, IERC20) returns (bool) {
        ITranche(tranche).updateUnclaimedYield(msg.sender, to, amount);
        return super.transfer(to, amount);
    }

    /// @inheritdoc ERC20
    /// @notice This function reverts if Tranche is paused.
    /// NOTE: This function is overridden to ensure that `from`'s and `to`'s unclaimed yields is updated.
    ///       This is necessary to track the yield accrued by the user and to make YieldToken fungible.
    /// @dev  Every time a user transfers their YieldToken, we will update `from` and `to`'s unclaimed yield.
    ///       When someone transfers the YTs of `from` to `to`, The accrued yield at that time is stored for each account.
    ///       users can later claim their respective accrued yield with `ITranche#collect()`.
    function transferFrom(address from, address to, uint256 amount) public override(ERC20, IERC20) returns (bool) {
        ITranche(tranche).updateUnclaimedYield(from, to, amount);
        return super.transferFrom(from, to, amount);
    }

    /* ================== VIEW METHODS =================== */

    /* ================== METADATA =================== */

    /// @inheritdoc ERC20
    function name() public view override returns (string memory) {
        string memory tokenName = SafeERC20Namer.tokenName(target);
        return string.concat("Napier Yield Token ", tokenName, "@", _toDateString(maturity));
    }

    /// @inheritdoc ERC20
    function symbol() public view override returns (string memory) {
        string memory tokenSymbol = SafeERC20Namer.tokenSymbol(target);
        return string.concat("YT-", tokenSymbol, "@", _toDateString(maturity));
    }

    function decimals() public view override returns (uint8) {
        return uDecimals;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import {IBaseToken} from "./IBaseToken.sol";

interface IYieldToken is IBaseToken {
    error OnlyTranche();

    function tranche() external view returns (address);

    /// @notice mint yield token
    /// @dev only tranche can mint yield token
    /// @param to recipient of yield token
    /// @param amount amount of yield token to mint
    function mint(address to, uint256 amount) external;

    /// @notice burn yield token of owner
    /// @dev only tranche can burn yield token
    /// @param owner owner of yield token
    /// @param amount amount of yield token to burn
    function burn(address owner, uint256 amount) external;

    /// @notice spender burn yield token on behalf of owner
    /// @notice owner must approve spender prior to calling this function
    /// @dev only tranche can burn yield token
    /// @param owner owner of yield token
    /// @param spender address to burn yield token on behalf of owner
    /// @param amount amount of yield token to burn
    function burnFrom(address owner, address spender, uint256 amount) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import {IERC20} from "@openzeppelin/[email protected]/token/ERC20/IERC20.sol";

/// @title IBaseToken
/// @notice token interface for Principal and Yield tokens
interface IBaseToken is IERC20 {
    /// @notice maturity date of the token
    function maturity() external view returns (uint256);

    /// @notice target address of the token
    function target() external view returns (address);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import {IERC5095} from "./IERC5095.sol";

/// @notice Tranche interface
/// @dev Tranche divides a yield-bearing token into two tokens: Principal and Yield tokens
///      Unspecific types: Simply avoiding dependencies on other interfaces from our interfaces
interface ITranche is IERC5095 {
    /* ==================== ERRORS ===================== */

    error TimestampBeforeMaturity();
    error TimestampAfterMaturity();
    error ProtectedToken();
    error Unauthorized();
    error OnlyYT();
    error ReentrancyGuarded();
    error ZeroAddress();
    error NoAccruedYield();

    /* ==================== EVENTS ===================== */

    /// @param adapter the address of the adapter
    /// @param maturity timestamp of maturity (seconds since Unix epoch)
    /// @param issuanceFee fee for issuing PT and YT
    event SeriesCreated(address indexed adapter, uint256 indexed maturity, uint256 issuanceFee);

    /// @param from the sender of the underlying token
    /// @param to the recipient of the PT and YT
    /// @param underlyingUsed the amount of underlying token used to issue PT and YT
    /// @param sharesUsed the amount of target token used to issue PT and YT (before deducting issuance fee)
    event Issue(address indexed from, address indexed to, uint256 underlyingUsed, uint256 sharesUsed);

    /// @param owner the address of the owner of the PT and YT (address that called collect())
    /// @param shares the amount of Target token collected
    event Collect(address indexed owner, uint256 shares);

    /// @param owner the address of the owner of the PT and YT
    /// @param to the recipient of the underlying token redeemed
    /// @param underlyingRedeemed the amount of underlying token redeemed
    event RedeemWithYT(address indexed owner, address indexed to, uint256 underlyingRedeemed);

    /* ==================== STRUCTS ===================== */

    /// @notice Series is a struct that contains all the information about a series.
    /// @param underlying the address of the underlying token
    /// @param target the address of the target token
    /// @param yt the address of the Yield Token
    /// @param adapter the address of the adapter
    /// @param mscale scale value at maturity
    /// @param maxscale max scale value from this series' lifetime
    /// @param issuanceFee fee for issuing PT and YT
    /// @param maturity timestamp of maturity (seconds since Unix epoch)
    struct Series {
        address underlying;
        address target;
        address yt;
        address adapter;
        uint256 mscale;
        uint256 maxscale;
        uint64 issuanceFee;
        uint64 maturity;
    }

    /// @notice GlobalScales is a struct that contains scale values that are used in multiple functions throughout the Tranche contract.
    /// @param mscale scale value at maturity. before maturity and settlement, this value is 0.
    /// @param maxscale max scale value from this series' lifetime.
    struct GlobalScales {
        uint128 mscale;
        uint128 maxscale;
    }

    /* ================== MUTATIVE METHODS =================== */

    /// @notice deposit an `underlyingAmount` of underlying token into the yield source, receiving PT and YT.
    ///         amount of PT and YT issued are the same.
    /// @param   to the address to receive PT and YT
    /// @param   underlyingAmount the amount of underlying token to deposit
    /// @return  principalAmount the amount of PT and YT issued
    function issue(address to, uint256 underlyingAmount) external returns (uint256 principalAmount);

    /// @notice redeem an `principalAmount` of PT and YT for underlying token.
    /// @param from the address to burn PT and YT from
    /// @param to the address to receive underlying token
    /// @param pyAmount the amount of PT and YT to redeem
    /// @return underlyingAmount the amount of underlying token redeemed
    function redeemWithYT(address from, address to, uint256 pyAmount) external returns (uint256 underlyingAmount);

    /// @notice collect interest for `msg.sender` and transfer accrued interest to `msg.sender`
    /// NOTE: if the maturity has passed, all the YT balance of `msg.sender` is burned.
    /// @dev anyone can call this function to collect interest for themselves
    /// @return collected collected interest in Underlying token
    function collect() external returns (uint256 collected);

    /* ================== PERMISSIONED METHODS =================== */

    /// @notice collect interest from the yield source and distribute it
    ///         every YT transfer, this function is triggered by the Yield Token contract.
    ///         only the Yield Token contract can call this function.
    ///         NOTE: YT is not burned in this function even if the maturity has passed.
    /// @param from address to transfer the Yield Token from. i.e. the user who collects the interest.
    /// @param to address to transfer the Yield Token to (MUST NOT be zero address, CAN be the same as `from`)
    /// @param value amount of Yield Token transferred to `to` (CAN be 0)
    function updateUnclaimedYield(address from, address to, uint256 value) external;

    /* ================== VIEW METHODS =================== */

    /// @notice get the address of Yield Token associated with this Tranche.
    function yieldToken() external view returns (address);

    /// @notice get Series struct
    function getSeries() external view returns (Series memory);

    /// @notice get an accrued yield that can be claimed by `account` (in unis of Target token)
    /// @dev this is reset to 0 when `account` claims the yield.
    /// @param account the address to check
    /// @return accruedInTarget
    function unclaimedYields(address account) external view returns (uint256 accruedInTarget);

    /// @notice get an accrued yield that can be claimed by `account` (in unis of Underlying token)
    /// @param account the address to check
    /// @return accruedInUnderlying accrued yield in underlying token
    function previewCollect(address account) external view returns (uint256 accruedInUnderlying);
}

// SPDX-License-Identifier: GPL-3.0-or-later

// Modified from: Uniswap Library
// Use OpenZepplin's Strings library instead of the one from Uniswap
// https://github.com/Uniswap/solidity-lib/blob/c01640b0f0f1d8a85cba8de378cc48469fcfd9a6/contracts/libraries/SafeERC20Namer.sol
// https://github.com/yieldprotocol/yield-utils-v2/blob/dbeb85ac94befc477bf8cdff9f178fdf331eb83d/src/token/SafeERC20Namer.sol

pragma solidity ^0.8.0;

import {Strings} from "@openzeppelin/[email protected]/utils/Strings.sol";

// produces token descriptors from inconsistent or absent ERC20 symbol implementations that can return string or bytes32
// this library will always produce a string symbol to represent the token
library SafeERC20Namer {
    function bytes32ToString(bytes32 x) private pure returns (string memory) {
        bytes memory bytesString = new bytes(32);
        uint256 charCount = 0;
        for (uint256 j; j < 32; j++) {
            bytes1 char = x[j];
            if (char != 0) {
                bytesString[charCount] = char;
                charCount++;
            }
        }
        bytes memory bytesStringTrimmed = new bytes(charCount);
        for (uint256 j; j < charCount; j++) {
            bytesStringTrimmed[j] = bytesString[j];
        }
        return string(bytesStringTrimmed);
    }

    // assumes the data is in position 2
    function parseStringData(bytes memory b) private pure returns (string memory) {
        uint256 charCount = 0;
        // first parse the charCount out of the data
        for (uint256 i = 32; i < 64; i++) {
            charCount <<= 8;
            charCount += uint8(b[i]);
        }

        bytes memory bytesStringTrimmed = new bytes(charCount);
        for (uint256 i; i < charCount; i++) {
            bytesStringTrimmed[i] = b[i + 64];
        }

        return string(bytesStringTrimmed);
    }

    // uses a heuristic to produce a token name from the address
    // the heuristic returns the full hex of the address string in upper case
    function addressToName(address token) private pure returns (string memory) {
        return Strings.toHexString(token);
    }

    // uses a heuristic to produce a token symbol from the address
    // the heuristic returns the first 6 hex of the address string in upper case
    function addressToSymbol(address token) private pure returns (string memory) {
        return Strings.toHexString(token);
    }

    // calls an external view token contract method that returns a symbol or name, and parses the output into a string
    function callAndParseStringReturn(address token, bytes4 selector) private view returns (string memory) {
        (bool success, bytes memory data) = token.staticcall(abi.encodeWithSelector(selector));
        // if not implemented, or returns empty data, return empty string
        if (!success || data.length == 0) {
            return "";
        }
        // bytes32 data always has length 32
        if (data.length == 32) {
            bytes32 decoded = abi.decode(data, (bytes32));
            return bytes32ToString(decoded);
        } else if (data.length > 64) {
            return abi.decode(data, (string));
        }
        return "";
    }

    // attempts to extract the token symbol. if it does not implement symbol, returns a symbol derived from the address
    function tokenSymbol(address token) internal view returns (string memory) {
        // 0x95d89b41 = bytes4(keccak256("symbol()"))
        string memory symbol = callAndParseStringReturn(token, 0x95d89b41);
        if (bytes(symbol).length == 0) {
            // fallback to 6 uppercase hex of address
            return addressToSymbol(token);
        }
        return symbol;
    }

    // attempts to extract the token name. if it does not implement name, returns a name derived from the address
    function tokenName(address token) internal view returns (string memory) {
        // 0x06fdde03 = bytes4(keccak256("name()"))
        string memory name = callAndParseStringReturn(token, 0x06fdde03);
        if (bytes(name).length == 0) {
            // fallback to full hex of address
            return addressToName(token);
        }
        return name;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.19;

import {IBaseToken} from "./interfaces/IBaseToken.sol";
import {DateTime} from "./utils/DateTime.sol";
import {ERC20Permit} from "@openzeppelin/[email protected]/token/ERC20/extensions/ERC20Permit.sol";

abstract contract BaseToken is ERC20Permit, IBaseToken {
    /// @inheritdoc IBaseToken
    function maturity() external view virtual returns (uint256);

    /// @inheritdoc IBaseToken
    function target() external view virtual returns (address);

    function _toDateString(uint256 _maturity) internal pure returns (string memory) {
        (string memory d, string memory m, string memory y) = DateTime.toDateString(_maturity);
        return string.concat(d, "-", m, "-", y);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

import {IERC20} from "@openzeppelin/[email protected]/token/ERC20/IERC20.sol";

/// @notice Principal tokens (zero-coupon tokens) are redeemable for a single underlying EIP-20 token at a future timestamp.
///         https://eips.ethereum.org/EIPS/eip-5095
interface IERC5095 is IERC20 {
    event Redeem(address indexed from, address indexed to, uint256 underlyingAmount);

    /// @dev Asset that is returned on redemption.
    function underlying() external view returns (address underlyingAddress);

    /// @dev Unix time at which redemption of fyToken for underlying are possible
    function maturity() external view returns (uint256 timestamp);

    /// @dev Converts a specified amount of principal to underlying
    function convertToUnderlying(uint256 principalAmount) external view returns (uint256 underlyingAmount);

    /// @dev Converts a specified amount of underlying to principal
    function convertToPrincipal(uint256 underlyingAmount) external view returns (uint256 principalAmount);

    /// @dev Gives the maximum amount an address holder can redeem in terms of the principal
    function maxRedeem(address holder) external view returns (uint256 maxPrincipalAmount);

    /// @dev Gives the amount in terms of underlying that the princiapl amount can be redeemed for plus accrual
    function previewRedeem(uint256 principalAmount) external view returns (uint256 underlyingAmount);

    /// @dev Burn fyToken after maturity for an amount of principal.
    function redeem(uint256 principalAmount, address to, address from) external returns (uint256 underlyingAmount);

    /// @dev Gives the maximum amount an address holder can withdraw in terms of the underlying
    function maxWithdraw(address holder) external view returns (uint256 maxUnderlyingAmount);

    /// @dev Gives the amount in terms of principal that the underlying amount can be withdrawn for plus accrual
    function previewWithdraw(uint256 underlyingAmount) external view returns (uint256 principalAmount);

    /// @dev Burn fyToken after maturity for an amount of underlying.
    function withdraw(uint256 underlyingAmount, address to, address from) external returns (uint256 principalAmount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.8;

import "./ECDSA.sol";
import "../ShortStrings.sol";
import "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * _Available since v3.4._
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant _TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {EIP-5267}.
     *
     * _Available since v4.9._
     */
    function eip712Domain()
        public
        view
        virtual
        override
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _name.toStringWithFallback(_nameFallback),
            _version.toStringWithFallback(_versionFallback),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.9.0;

// Taken from: https://github.com/bokkypoobah/BokkyPooBahsDateTimeLibrary

library DateTime {
    uint256 constant SECONDS_PER_DAY = 24 * 60 * 60;
    uint256 constant SECONDS_PER_HOUR = 60 * 60;
    uint256 constant SECONDS_PER_MINUTE = 60;
    int256 constant OFFSET19700101 = 2440588;

    function timestampToDate(uint256 timestamp) internal pure returns (uint256 year, uint256 month, uint256 day) {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }

    function timestampToDateTime(
        uint256 timestamp
    ) internal pure returns (uint256 year, uint256 month, uint256 day, uint256 hour, uint256 minute, uint256 second) {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint256 secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
        secs = secs % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
        second = secs % SECONDS_PER_MINUTE;
    }

    function toDateString(
        uint256 _timestamp
    ) internal pure returns (string memory d, string memory m, string memory y) {
        (uint256 year, uint256 month, uint256 day) = timestampToDate(_timestamp);
        d = uintToString(day);
        m = uintToString(month);
        y = uintToString(year);
    }

    function getDayOfWeek(uint256 timestamp) internal pure returns (uint256 dayOfWeek) {
        uint256 _days = timestamp / SECONDS_PER_DAY;
        dayOfWeek = ((_days + 3) % 7) + 1;
    }

    /// Taken from https://stackoverflow.com/questions/47129173/how-to-convert-uint-to-string-in-solidity
    function uintToString(uint256 _i) internal pure returns (string memory _uintAsString) {
        if (_i == 0) {
            return "0";
        }
        uint256 j = _i;
        uint256 len;
        while (j != 0) {
            len++;
            j /= 10;
        }
        bytes memory bstr = new bytes(len);
        uint256 k = len;
        while (_i != 0) {
            k = k - 1;
            uint8 temp = (48 + uint8(_i - (_i / 10) * 10));
            bytes1 b1 = bytes1(temp);
            bstr[k] = b1;
            _i /= 10;
        }
        return string(bstr);
    }

    // ------------------------------------------------------------------------
    // Calculate the number of days from 1970/01/01 to year/month/day using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and subtracting the offset 2440588 so that 1970/01/01 is day 0
    //
    // days = day
    //      - 32075
    //      + 1461 * (year + 4800 + (month - 14) / 12) / 4
    //      + 367 * (month - 2 - (month - 14) / 12 * 12) / 12
    //      - 3 * ((year + 4900 + (month - 14) / 12) / 100) / 4
    //      - offset
    // ------------------------------------------------------------------------
    function _daysFromDate(uint256 year, uint256 month, uint256 day) internal pure returns (uint256 _days) {
        require(year >= 1970);
        int256 _year = int256(year);
        int256 _month = int256(month);
        int256 _day = int256(day);

        int256 __days = _day -
            32075 +
            (1461 * (_year + 4800 + (_month - 14) / 12)) /
            4 +
            (367 * (_month - 2 - ((_month - 14) / 12) * 12)) /
            12 -
            (3 * ((_year + 4900 + (_month - 14) / 12) / 100)) /
            4 -
            OFFSET19700101;

        _days = uint256(__days);
    }

    // ------------------------------------------------------------------------
    // Calculate year/month/day from the number of days since 1970/01/01 using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and adding the offset 2440588 so that 1970/01/01 is day 0
    //
    // int L = days + 68569 + offset
    // int N = 4 * L / 146097
    // L = L - (146097 * N + 3) / 4
    // year = 4000 * (L + 1) / 1461001
    // L = L - 1461 * year / 4 + 31
    // month = 80 * L / 2447
    // dd = L - 2447 * month / 80
    // L = month / 11
    // month = month + 2 - 12 * L
    // year = 100 * (N - 49) + year + L
    // ------------------------------------------------------------------------
    function _daysToDate(uint256 _days) internal pure returns (uint256 year, uint256 month, uint256 day) {
        int256 __days = int256(_days);

        int256 L = __days + 68569 + OFFSET19700101;
        int256 N = (4 * L) / 146097;
        L = L - (146097 * N + 3) / 4;
        int256 _year = (4000 * (L + 1)) / 1461001;
        L = L - (1461 * _year) / 4 + 31;
        int256 _month = (80 * L) / 2447;
        int256 _day = L - (2447 * _month) / 80;
        L = _month / 11;
        _month = _month + 2 - 12 * L;
        _year = 100 * (N - 49) + _year + L;

        year = uint256(_year);
        month = uint256(_month);
        day = uint256(_day);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.8;

import "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant _FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(_FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.0;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

{
  "remappings": [
    "forge-std/=lib/forge-std/src/",
    "@openzeppelin/[email protected]/=lib/openzeppelin-contracts/contracts/",
    "hardhat-deployer/=lib/hardhat-deployer/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "eth-gas-reporter/=node_modules/eth-gas-reporter/",
    "forge-std/=lib/forge-std/src/",
    "hardhat/=node_modules/hardhat/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts/contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 2000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "none",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_tranche","type":"address"},{"internalType":"address","name":"_underlying","type":"address"},{"internalType":"address","name":"_target","type":"address"},{"internalType":"uint256","name":"_maturity","type":"uint256"}],"stateMutability":"payable","type":"constructor"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[],"name":"OnlyTranche","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"maturity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"target","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tranche","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"underlying","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000dafff5445581906aec91f4b26d7f15351dd2964b000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2000000000000000000000000497e3bf09c5ae5b5811b576372889e7716c7b3120000000000000000000000000000000000000000000000000000000067724355

-----Decoded View---------------
Arg [0] : _tranche (address): 0xdAfFF5445581906Aec91f4b26D7F15351dD2964b
Arg [1] : _underlying (address): 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2
Arg [2] : _target (address): 0x497E3BF09c5aE5b5811b576372889E7716C7b312
Arg [3] : _maturity (uint256): 1735541589

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 000000000000000000000000dafff5445581906aec91f4b26d7f15351dd2964b
Arg [1] : 000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2
Arg [2] : 000000000000000000000000497e3bf09c5ae5b5811b576372889e7716c7b312
Arg [3] : 0000000000000000000000000000000000000000000000000000000067724355