ERC-20
Overview
Max Total Supply
1,000,000 DYLP
Holders
160
Market
Onchain Market Cap
$0.00
Circulating Supply Market Cap
-
Other Info
Token Contract (WITH 18 Decimals)
Balance
0.71478676770605031 DYLPValue
$0.00Loading...
Loading
Loading...
Loading
Loading...
Loading
# | Exchange | Pair | Price | 24H Volume | % Volume |
---|
Contract Name:
DynamicLiquidity
Compiler Version
v0.8.21+commit.d9974bed
Optimization Enabled:
Yes with 200 runs
Other Settings:
default evmVersion
Contract Source Code (Solidity Standard Json-Input format)
// Dynamic Liquidity (DYLP) // // https://dynamicliquidity.com // https://twitter.com/DynamicLiq // // 0.69% tax (1% slippage) // **TAX IS REMOVED ON SELLS WHERE YOU DON'T BREAK THE RULES (see `canSellFreely()` function and TLDR below)** // // TLDR; // - chart go up, liquidity go up, price impact down // - chart go down, liquidity go down, price impact up // - sell more than 20% of your biggest buy at once, rekt // - sell within 1 hour of buying, rekt // - sell more than once within 1 hour, rekt // // Think of DYLP as project emphasizing and thriving from utilitarianism, meaning if the majority // act in good faith and respectful liquidity will remain thick and holders can gain along // the way. When holders become greedy, all bets are off. // // This is a liquidity social experiment that provisions and deprovisions liquidity all // in the contract and was built to trustlessly and explicitly punish holders in aggregate // if most are full stackers, clip releasers, dumpers, jeets, and generally anyone who doesn't // know how or desire to respect the technicals of a chart. // // The DYLP contract caches pertinent information on each transaction and will add to or // remove liquidity over time in order to reward those respecting and buying into the chart // and ultimately punish those who take actions to damage it. The contract will frontrun large sells // with liquidity removal that increases price impact and reduces gains on said sells. The ETH & tokens // retrieved from this liquidity removal are custodied in the contract and dynamically added back to the // liquidity pool as buys come through and the chart goes back up over time. // SPDX-License-Identifier: MIT pragma solidity ^0.8.21; import '@openzeppelin/contracts/token/ERC20/ERC20.sol'; import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol'; import '@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol'; import '@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol'; contract DynamicLiquidity is ERC20 { using SafeERC20 for IERC20; uint256 constant PRECISION = 10 ** 18; address immutable POOL; IUniswapV2Router02 immutable ROUTER; address _deployer; uint256 _lastTransfer; bool _lpChanging; bool _inactivity; mapping(address => uint256) _biggestBuy; mapping(address => uint256) _lastBuyTs; mapping(address => uint256) _lastSellTs; event LiquidityAdded( uint256 _tokensDesired, uint256 _ethDesired, uint256 _tokensActual, uint256 _ethActual ); event LiquidityRemoved(uint256 _tokensRemoved, uint256 _ethRemoved); constructor( IUniswapV2Router02 _uniRouter, address __deployer ) ERC20('Dynamic Liquidity', 'DYLP') { _deployer = __deployer; ROUTER = _uniRouter; POOL = IUniswapV2Factory(ROUTER.factory()).createPair( address(this), ROUTER.WETH() ); _mint(_msgSender(), 1_000_000 * 10 ** 18); } function _transfer( address _from, address _to, uint256 _amount ) internal virtual override { _lastTransfer = block.timestamp; bool _buy = _from == POOL && _to != address(ROUTER); bool _sell = _to == POOL; uint256 _tax; if ((_buy || _sell) && !_inactivity) { _tax = (_amount * 69) / 10000; // 0.69% if (!_lpChanging && _sell) { _lpChanging = true; if (canSellFreely(_from, _amount)) { _tax = 0; _add(); } else { _remove(); } _lastSellTs[_from] = block.timestamp; _lpChanging = false; } if (_buy) { _biggestBuy[_to] = _biggestBuy[_to] > _amount ? _biggestBuy[_to] : _amount; _lastBuyTs[_to] = block.timestamp; } super._transfer(_from, address(this), _tax); } super._transfer(_from, _to, _amount - _tax); } function _add() internal { uint256 _tokensToAdd = balanceOf(address(this)); uint256 _ethToAdd = address(this).balance; if (_tokensToAdd == 0 || _ethToAdd == 0) { return; } _approve(address(this), address(ROUTER), _tokensToAdd); (uint256 _actualAmountToken, uint256 _actualAmountETH, ) = ROUTER .addLiquidityETH{ value: _ethToAdd }( address(this), _tokensToAdd, 0, 0, address(this), block.timestamp ); emit LiquidityAdded( _tokensToAdd, _ethToAdd, _actualAmountToken, _actualAmountETH ); } function _remove() internal { if (_lpBal() == 0) { return; } uint256 _balBefore = balanceOf(address(this)); uint256 _removingLp = (_lpBal() * 10) / 100; // 10% current LP balance IERC20(POOL).approve(address(ROUTER), _removingLp); uint256 _amountETH = ROUTER.removeLiquidityETHSupportingFeeOnTransferTokens( address(this), _removingLp, 0, 0, address(this), block.timestamp ); emit LiquidityRemoved(balanceOf(address(this)) - _balBefore, _amountETH); } function _lpBal() internal view returns (uint256) { return IERC20(POOL).balanceOf(address(this)); } function canSellFreely( address _wallet, uint256 _sellAmount ) public view returns (bool) { return _sellAmount <= (_biggestBuy[_wallet] * 20) / 100 && // selling <=20% of biggest buy is gud block.timestamp > _lastBuyTs[_wallet] + 60 minutes && // don't sell within 1 hour of last buying block.timestamp > _lastSellTs[_wallet] + 60 minutes; // don't sell within 1 hour of last selling } // if inactive and has no buys/sells/transfers for 3+ hours, allow // withdrawal of LP/ETH. As long as the project remains active and pushing, // this cannot happen. function withdrawOnInactivity() external { require(block.timestamp > _lastTransfer + 3 hours, 'ACTIVITY'); if (_lpBal() > 0) { IERC20(POOL).safeTransfer(_deployer, _lpBal()); } uint256 _bal = address(this).balance; if (_bal > 0) { (bool _s, ) = payable(_deployer).call{ value: _bal }(''); require(_s); } _inactivity = true; } receive() external payable {} }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol) pragma solidity ^0.8.0; import "./IERC20.sol"; import "./extensions/IERC20Metadata.sol"; import "../../utils/Context.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * The default value of {decimals} is 18. To change this, you should override * this function so it returns a different value. * * We have followed general OpenZeppelin Contracts guidelines: functions revert * instead returning `false` on failure. This behavior is nonetheless * conventional and does not conflict with the expectations of ERC20 * applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20, IERC20Metadata { mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; /** * @dev Sets the values for {name} and {symbol}. * * All two of these values are immutable: they can only be set once during * construction. */ constructor(string memory name_, string memory symbol_) { _name = name_; _symbol = symbol_; } /** * @dev Returns the name of the token. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5.05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the default value returned by this function, unless * it's overridden. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view virtual override returns (uint8) { return 18; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `to` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address to, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _transfer(owner, to, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on * `transferFrom`. This is semantically equivalent to an infinite approval. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { address owner = _msgSender(); _approve(owner, spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * NOTE: Does not update the allowance if the current allowance * is the maximum `uint256`. * * Requirements: * * - `from` and `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. * - the caller must have allowance for ``from``'s tokens of at least * `amount`. */ function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) { address spender = _msgSender(); _spendAllowance(from, spender, amount); _transfer(from, to, amount); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { address owner = _msgSender(); _approve(owner, spender, allowance(owner, spender) + addedValue); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { address owner = _msgSender(); uint256 currentAllowance = allowance(owner, spender); require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero"); unchecked { _approve(owner, spender, currentAllowance - subtractedValue); } return true; } /** * @dev Moves `amount` of tokens from `from` to `to`. * * This internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `from` must have a balance of at least `amount`. */ function _transfer(address from, address to, uint256 amount) internal virtual { require(from != address(0), "ERC20: transfer from the zero address"); require(to != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(from, to, amount); uint256 fromBalance = _balances[from]; require(fromBalance >= amount, "ERC20: transfer amount exceeds balance"); unchecked { _balances[from] = fromBalance - amount; // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by // decrementing then incrementing. _balances[to] += amount; } emit Transfer(from, to, amount); _afterTokenTransfer(from, to, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply += amount; unchecked { // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above. _balances[account] += amount; } emit Transfer(address(0), account, amount); _afterTokenTransfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); uint256 accountBalance = _balances[account]; require(accountBalance >= amount, "ERC20: burn amount exceeds balance"); unchecked { _balances[account] = accountBalance - amount; // Overflow not possible: amount <= accountBalance <= totalSupply. _totalSupply -= amount; } emit Transfer(account, address(0), amount); _afterTokenTransfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Updates `owner` s allowance for `spender` based on spent `amount`. * * Does not update the allowance amount in case of infinite allowance. * Revert if not enough allowance is available. * * Might emit an {Approval} event. */ function _spendAllowance(address owner, address spender, uint256 amount) internal virtual { uint256 currentAllowance = allowance(owner, spender); if (currentAllowance != type(uint256).max) { require(currentAllowance >= amount, "ERC20: insufficient allowance"); unchecked { _approve(owner, spender, currentAllowance - amount); } } } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {} /** * @dev Hook that is called after any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * has been transferred to `to`. * - when `from` is zero, `amount` tokens have been minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens have been burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {} }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; /** * @dev Interface for the optional metadata functions from the ERC20 standard. * * _Available since v4.1._ */ interface IERC20Metadata is IERC20 { /** * @dev Returns the name of the token. */ function name() external view returns (string memory); /** * @dev Returns the symbol of the token. */ function symbol() external view returns (string memory); /** * @dev Returns the decimals places of the token. */ function decimals() external view returns (uint8); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `from` to `to` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 amount) external returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.0; import "../IERC20.sol"; import "../extensions/IERC20Permit.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; /** * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeTransfer(IERC20 token, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } /** * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful. */ function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove(IERC20 token, address spender, uint256 value) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } /** * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 oldAllowance = token.allowance(address(this), spender); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value)); } /** * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value)); } } /** * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval * to be set to zero before setting it to a non-zero value, such as USDT. */ function forceApprove(IERC20 token, address spender, uint256 value) internal { bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value); if (!_callOptionalReturnBool(token, approvalCall)) { _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0)); _callOptionalReturn(token, approvalCall); } } /** * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`. * Revert on invalid signature. */ function safePermit( IERC20Permit token, address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) internal { uint256 nonceBefore = token.nonces(owner); token.permit(owner, spender, value, deadline, v, r, s); uint256 nonceAfter = token.nonces(owner); require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). * * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead. */ function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false // and not revert is the subcall reverts. (bool success, bytes memory returndata) = address(token).call(data); return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token)); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol) pragma solidity ^0.8.1; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * * Furthermore, `isContract` will also return true if the target contract within * the same transaction is already scheduled for destruction by `SELFDESTRUCT`, * which only has an effect at the end of a transaction. * ==== * * [IMPORTANT] * ==== * You shouldn't rely on `isContract` to protect against flash loan attacks! * * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract * constructor. * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize/address.code.length, which returns 0 // for contracts in construction, since the code is only stored at the end // of the constructor execution. return account.code.length > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata, errorMessage); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract. * * _Available since v4.8._ */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata, string memory errorMessage ) internal view returns (bytes memory) { if (success) { if (returndata.length == 0) { // only check isContract if the call was successful and the return data is empty // otherwise we already know that it was a contract require(isContract(target), "Address: call to non-contract"); } return returndata; } else { _revert(returndata, errorMessage); } } /** * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the * revert reason or using the provided one. * * _Available since v4.3._ */ function verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) internal pure returns (bytes memory) { if (success) { return returndata; } else { _revert(returndata, errorMessage); } } function _revert(bytes memory returndata, string memory errorMessage) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts v4.4.1 (utils/Context.sol) pragma solidity ^0.8.0; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } }
pragma solidity >=0.5.0; interface IUniswapV2Factory { event PairCreated(address indexed token0, address indexed token1, address pair, uint); function feeTo() external view returns (address); function feeToSetter() external view returns (address); function getPair(address tokenA, address tokenB) external view returns (address pair); function allPairs(uint) external view returns (address pair); function allPairsLength() external view returns (uint); function createPair(address tokenA, address tokenB) external returns (address pair); function setFeeTo(address) external; function setFeeToSetter(address) external; }
pragma solidity >=0.6.2; interface IUniswapV2Router01 { function factory() external pure returns (address); function WETH() external pure returns (address); function addLiquidity( address tokenA, address tokenB, uint amountADesired, uint amountBDesired, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB, uint liquidity); function addLiquidityETH( address token, uint amountTokenDesired, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external payable returns (uint amountToken, uint amountETH, uint liquidity); function removeLiquidity( address tokenA, address tokenB, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline ) external returns (uint amountA, uint amountB); function removeLiquidityETH( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountToken, uint amountETH); function removeLiquidityWithPermit( address tokenA, address tokenB, uint liquidity, uint amountAMin, uint amountBMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint amountA, uint amountB); function removeLiquidityETHWithPermit( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint amountToken, uint amountETH); function swapExactTokensForTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external returns (uint[] memory amounts); function swapTokensForExactTokens( uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline ) external returns (uint[] memory amounts); function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline) external payable returns (uint[] memory amounts); function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts); function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external returns (uint[] memory amounts); function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline) external payable returns (uint[] memory amounts); function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB); function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut); function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn); function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts); function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts); }
pragma solidity >=0.6.2; import './IUniswapV2Router01.sol'; interface IUniswapV2Router02 is IUniswapV2Router01 { function removeLiquidityETHSupportingFeeOnTransferTokens( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline ) external returns (uint amountETH); function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens( address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline, bool approveMax, uint8 v, bytes32 r, bytes32 s ) external returns (uint amountETH); function swapExactTokensForTokensSupportingFeeOnTransferTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external; function swapExactETHForTokensSupportingFeeOnTransferTokens( uint amountOutMin, address[] calldata path, address to, uint deadline ) external payable; function swapExactTokensForETHSupportingFeeOnTransferTokens( uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline ) external; }
{ "metadata": { "bytecodeHash": "none" }, "optimizer": { "enabled": true, "runs": 200 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"inputs":[{"internalType":"contract IUniswapV2Router02","name":"_uniRouter","type":"address"},{"internalType":"address","name":"__deployer","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_tokensDesired","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_ethDesired","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_tokensActual","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_ethActual","type":"uint256"}],"name":"LiquidityAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_tokensRemoved","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_ethRemoved","type":"uint256"}],"name":"LiquidityRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_wallet","type":"address"},{"internalType":"uint256","name":"_sellAmount","type":"uint256"}],"name":"canSellFreely","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawOnInactivity","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]
Contract Creation Code
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
Deployed Bytecode
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
Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)
0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d000000000000000000000000365441c11a82e69e657627d5f887d3dace2a4948
-----Decoded View---------------
Arg [0] : _uniRouter (address): 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
Arg [1] : __deployer (address): 0x365441C11A82E69e657627d5f887D3DaCE2a4948
-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d
Arg [1] : 000000000000000000000000365441c11a82e69e657627d5f887d3dace2a4948
Loading...
Loading
Loading...
Loading
[ Download: CSV Export ]
[ Download: CSV Export ]
A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.