Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./IUniswapV2Router02.sol";
import "./IUniswapV2Factory.sol";

contract CryptoKoala is Ownable, ERC20 {
    using SafeMath for uint256;
    using EnumerableSet for EnumerableSet.AddressSet;

    uint256 private initToken = 1000000000 * 10 ** 18;

    IUniswapV2Router02 public uniswapV2Router;
    IUniswapV2Factory public factory;
    address public pair;
    address public treePlantingAddress;

    uint256 public buyFee = 3;
    uint256 public sellFee = 3;
    bool inSwap = false;

    mapping(address => bool) public isExcludedFromFee;
    uint256 public antiBotAmount = 37500000 * 10 ** 18;
    uint256 public numTokensAutoswap = 3500000 * 10 ** 18;
    uint256 public maxTokensAutoswap = 15000000 * 10 ** 18;

    uint256 public antiBotInterval = 25;
    uint256 public antiBotEndTime;
    bool public tradingEnabled;
    constructor(address _router) ERC20("Crypto Koala", "CKOALA") {
        _mint(_msgSender(), initToken);
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(_router);
        uniswapV2Router = _uniswapV2Router;
        factory = IUniswapV2Factory(_uniswapV2Router.factory());
        treePlantingAddress = address(0xBAbF1cC4101Cc515200ac0EcEAA90D0E6140D480);
        isExcludedFromFee[_msgSender()] = true;
        isExcludedFromFee[treePlantingAddress] = true;
        isExcludedFromFee[address(this)] = true;
        tradingEnabled = false;
        address _pair = factory.createPair(uniswapV2Router.WETH(), address(this));
        pair = _pair;
    }

    modifier lockTheSwap() {
        inSwap = true;
        _;
        inSwap = false;
    }

    function burn(uint256 amount) public {
        _burn(_msgSender(), amount);
    }

    function enableTrading() external onlyOwner {
        require(!tradingEnabled, "Trading already enabled.");
        tradingEnabled = true;
        antiBotEndTime = block.timestamp + antiBotInterval;
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual override {

        uint256 taxFee;
        require(tradingEnabled || isExcludedFromFee[sender] || isExcludedFromFee[recipient], "Trading not yet enabled!");
        if (inSwap) {
            super._transfer(sender, recipient, amount);
            return;
        }
        //Take Fee
        if (!isExcludedFromFee[sender] && isPair(recipient)) {
            taxFee = sellFee;
        } else if (!isExcludedFromFee[recipient] && isPair(sender)) {
            taxFee = buyFee;
        }

        if (
            antiBotEndTime > block.timestamp &&
            amount > antiBotAmount &&
            sender != address(this) &&
            recipient != address(this) &&
            isPair(sender)
        ) {
            taxFee = 85;
        }

        if (taxFee > 0 && sender != address(this) && recipient != address(this)) {
            uint256 _fee = amount.mul(taxFee).div(100);
            super._transfer(sender, address(this), _fee);
            amount = amount.sub(_fee);
        } else {
            if (balanceOf(address(this)) > numTokensAutoswap && !isPair(sender)) {
                swapFeeToTreePlanting();
            }
        }

        super._transfer(sender, recipient, amount);
    }

    function swapFeeToTreePlanting() internal lockTheSwap {
        uint256 numTokenToSell = balanceOf(address(this)) > maxTokensAutoswap ? maxTokensAutoswap : balanceOf(address(this));
        swapTokensForETH(numTokenToSell);
    }

    function swapTokensForETH(uint256 tokenAmount) private {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        uniswapV2Router.swapExactTokensForETH(tokenAmount, 0, path, treePlantingAddress, block.timestamp);
    }

    function setExcludeFromFee(address _address, bool _status) external onlyOwner {
        require(_address != address(0), "0x is not accepted here");
        require(isExcludedFromFee[_address] != _status, "Status was set");
        isExcludedFromFee[_address] = _status;
    }

    function changeTreePlantingAddress(address _treePlantingAddress) external {
        require(_msgSender() == treePlantingAddress, "Only TreePlanting Wallet!");
        require(_treePlantingAddress != address(0), "0x is not accepted here");

        treePlantingAddress = _treePlantingAddress;
    }

    function isPair(address _pair) public view returns (bool) {
        return pair==_pair;
    }

    // receive eth
    receive() external payable {}

}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.2;

import './IUniswapV2Router01.sol';

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_router","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"antiBotAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"antiBotEndTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"antiBotInterval","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"buyFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_treePlantingAddress","type":"address"}],"name":"changeTreePlantingAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"enableTrading","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"factory","outputs":[{"internalType":"contract IUniswapV2Factory","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"isExcludedFromFee","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_pair","type":"address"}],"name":"isPair","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxTokensAutoswap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numTokensAutoswap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pair","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"sellFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"},{"internalType":"bool","name":"_status","type":"bool"}],"name":"setExcludeFromFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tradingEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"treePlantingAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"uniswapV2Router","outputs":[{"internalType":"contract IUniswapV2Router02","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d

-----Decoded View---------------
Arg [0] : _router (address): 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d