Token

Proof of Shiba 5 Days Locked (POSHIB-5D)

ERC-20

Overview

Max Total Supply

35,425,751,074.56 POSHIB-5D

Holders

Total Transfers

Market

Onchain Market Cap

$0.00

Circulating Supply Market Cap

Other Info

Token Contract (WITH 18 Decimals)

0x2ccf9edf894bb874bdc1ecc07898db17d8557fff

Click here to update the token information / general information

#	Exchange	Pair	Price	24H Volume	% Volume

This contract may be a proxy contract. Click on More Options and select Is this a proxy? to confirm and enable the "Read as Proxy" & "Write as Proxy" tabs.

Similar Match Source Code
This contract matches the deployed Bytecode of the Source Code for Contract 0x6F8266ed...A49B40471
The constructor portion of the code might be different and could alter the actual behaviour of the contract

Contract Name:

BeaconProxy

Compiler Version

v0.7.6+commit.7338295f

Optimization Enabled:

Yes with 800 runs

Other Settings:

default evmVersion, MIT license

Contract Source Code (Solidity)

IDE

/**
 *Submitted for verification at Etherscan.io on 2021-09-02
*/

/**
 *Submitted for verification at Etherscan.io on 2021-08-19
*/

// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/proxy/Proxy.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(
                gas(),
                implementation,
                0,
                calldatasize(),
                0,
                0
            )

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(
            data
        );
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/proxy/IBeacon.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// File: @openzeppelin/contracts/proxy/BeaconProxy.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This contract implements a proxy that gets the implementation address for each call from a {UpgradeableBeacon}.
 *
 * The beacon address is stored in storage slot `uint256(keccak256('eip1967.proxy.beacon')) - 1`, so that it doesn't
 * conflict with the storage layout of the implementation behind the proxy.
 *
 * _Available since v3.4._
 */
contract BeaconProxy is Proxy {
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 private constant _BEACON_SLOT =
        0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Initializes the proxy with `beacon`.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon. This
     * will typically be an encoded function call, and allows initializating the storage of the proxy like a Solidity
     * constructor.
     *
     * Requirements:
     *
     * - `beacon` must be a contract with the interface {IBeacon}.
     */
    constructor(address beacon, bytes memory data) public payable {
        assert(
            _BEACON_SLOT ==
                bytes32(uint256(keccak256("eip1967.proxy.beacon")) - 1)
        );
        _setBeacon(beacon, data);
    }

    /**
     * @dev Returns the current beacon address.
     */
    function _beacon() internal view virtual returns (address beacon) {
        bytes32 slot = _BEACON_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            beacon := sload(slot)
        }
    }

    /**
     * @dev Returns the current implementation address of the associated beacon.
     */
    function _implementation()
        internal
        view
        virtual
        override
        returns (address)
    {
        return IBeacon(_beacon()).implementation();
    }

    /**
     * @dev Changes the proxy to use a new beacon.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon.
     *
     * Requirements:
     *
     * - `beacon` must be a contract.
     * - The implementation returned by `beacon` must be a contract.
     */
    function _setBeacon(address beacon, bytes memory data) internal virtual {
        require(
            Address.isContract(beacon),
            "BeaconProxy: beacon is not a contract"
        );
        require(
            Address.isContract(IBeacon(beacon).implementation()),
            "BeaconProxy: beacon implementation is not a contract"
        );
        bytes32 slot = _BEACON_SLOT;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, beacon)
        }

        if (data.length > 0) {
            Address.functionDelegateCall(
                _implementation(),
                data,
                "BeaconProxy: function call failed"
            );
        }
    }
}

// File: @openzeppelin/contracts/utils/Context.sol

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].add(addedValue)
        );
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        virtual
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(
                subtractedValue,
                "ERC20: decreased allowance below zero"
            )
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(
            amount,
            "ERC20: transfer amount exceeds balance"
        );
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(
            amount,
            "ERC20: burn amount exceeds balance"
        );
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// File: contracts/interfaces/ILiquidVestingToken.sol

pragma solidity =0.7.6;

interface ILiquidVestingToken {
    enum AddType {
        MerkleTree,
        Airdrop
    }

    function initialize(
        string memory _name,
        string memory _symbol,
        uint8 _decimals,
        address _owner,
        address _factory,
        address _redeemToken,
        uint256 _activationTimestamp,
        uint256 _redeemTimestamp,
        AddType _type
    ) external;

    function overrideFee(uint256 _newFee) external;

    function addRecipient(address _recipient, uint256 _amount) external;

    function addRecipients(
        address[] memory _recipients,
        uint256[] memory _amounts
    ) external;

    function addMerkleRoot(
        bytes32 _merkleRoot,
        uint256 _totalAmount,
        uint8 _v,
        bytes32 _r,
        bytes32 _s
    ) external;

    function claimTokensByMerkleProof(
        bytes32[] memory _proof,
        uint256 _rootId,
        address _recipient,
        uint256 _amount
    ) external;

    function claimProjectTokensByFeeCollector() external;

    function redeem(address _recipient, uint256 _amount) external;
}

// File: contracts/interfaces/ILiquidVestingTokenFactory.sol

pragma solidity =0.7.6;
pragma abicoder v2;

interface ILiquidVestingTokenFactory {
    function merkleRootSigner() external view returns (address);

    function feeCollector() external view returns (address);

    function fee() external view returns (uint256);

    function getMinFee() external pure returns (uint256);

    function getMaxFee() external pure returns (uint256);

    function setMerkleRootSigner(address _newMerkleRootSigner) external;

    function setFeeCollector(address _newFeeCollector) external;

    function setFee(uint256 _fee) external;

    function implementation() external view returns (address);

    function createLiquidVestingToken(
        string[] memory name,
        string[] memory symbol,
        address redeemToken,
        uint256[] memory activationTimestamp,
        uint256[] memory redeemTimestamp,
        ILiquidVestingToken.AddType addRecipientsType
    ) external;
}

// File: contracts/LiquidVestingTokenFactory.sol

pragma solidity =0.7.6;

/**
 * @title LiquidVestingTokenFactory
 * @dev The LiquidVestingTokenFactory contract can be used to create
 * vesting contracts for any ERC20 token.
 */
contract LiquidVestingTokenFactory is Ownable, ILiquidVestingTokenFactory {
    uint256 public constant MIN_FEE = 0;
    uint256 public constant MAX_FEE = 5000;

    address private tokenImplementation;
    address public override merkleRootSigner;
    address public override feeCollector;
    uint256 public override fee;

    event VestingTokenCreated(
        address indexed redeemToken,
        address vestingToken
    );

    mapping(address => address[]) public vestingTokensByOriginalToken;

    /**
     * @dev Creates a vesting token factory contract.
     * @param _tokenImplementation Address of LiquidVestingToken contract implementation.
     * @param _merkleRootSigner Address of Merkle root signer.
     * @param _feeCollector Address of fee collector.
     * @param _fee Fee value.
     */
    constructor(
        address _tokenImplementation,
        address _merkleRootSigner,
        address _feeCollector,
        uint256 _fee
    ) {
        require(
            Address.isContract(_tokenImplementation),
            "Implementation is not a contract"
        );
        require(
            _merkleRootSigner != address(0),
            "Merkle root signer cannot be zero address"
        );
        require(
            _feeCollector != address(0),
            "Fee collector cannot be zero address"
        );
        require(_fee >= MIN_FEE && _fee <= MAX_FEE, "Fee goes beyond rank");

        merkleRootSigner = _merkleRootSigner;
        feeCollector = _feeCollector;
        fee = _fee;
        tokenImplementation = _tokenImplementation;
    }

    /**
     * @dev Set address of Merkle root signer.
     * @param _newMerkleRootSigner Address of signer.
     */
    function setMerkleRootSigner(address _newMerkleRootSigner)
        external
        override
        onlyOwner
    {
        require(
            _newMerkleRootSigner != address(0),
            "Merkle root signer cannot be zero address"
        );

        merkleRootSigner = _newMerkleRootSigner;
    }

    /**
     * @dev Set address of fee collector.
     * @param _newFeeCollector Address of fee collector.
     */
    function setFeeCollector(address _newFeeCollector)
        external
        override
        onlyOwner
    {
        require(
            _newFeeCollector != address(0),
            "Fee collector cannot be zero address"
        );

        feeCollector = _newFeeCollector;
    }

    /**
     * @dev Set a new fee in range 0% - 5%.
     * For example, if a fee is 5% it should be 5000 (5 * 10**3).
     * @param _fee Amount of fee.
     */
    function setFee(uint256 _fee) external override {
        require(_msgSender() == feeCollector, "Caller is not fee collector");
        require(_fee >= MIN_FEE && _fee <= MAX_FEE, "Fee goes beyond rank");

        fee = _fee;
    }

    /**
     * @dev Get implementation of LiquidVestingToken contract.
     */
    function implementation() external view override returns (address) {
        return tokenImplementation;
    }

    /**
     * @dev Get min fee value.
     */
    function getMinFee() external pure override returns (uint256) {
        return MIN_FEE;
    }

    /**
     * @dev Get max fee value.
     */
    function getMaxFee() external pure override returns (uint256) {
        return MAX_FEE;
    }

    /**
     * @dev Creates new LiquidVestingToken contracts.
     * @param name Array of token names.
     * @param symbol Array of token symbols.
     * @param redeemToken Address of redeem token that will be locked by vesting period.
     * @param activationTimestamp Array of timestamps that allow starting transfers of vesting tokens.
     * @param redeemTimestamp Array of timestamps that allow redeeming tokens.
     * @param addRecipientsType Type of saving recipients of vesting tokens.
     */
    function createLiquidVestingToken(
        string[] memory name,
        string[] memory symbol,
        address redeemToken,
        uint256[] memory activationTimestamp,
        uint256[] memory redeemTimestamp,
        ILiquidVestingToken.AddType addRecipientsType
    ) public override {
        require(
            redeemToken != address(0),
            "Company token cannot be zero address"
        );
        require(
            name.length == symbol.length &&
                name.length == activationTimestamp.length &&
                name.length == redeemTimestamp.length,
            "Arrays length should be same"
        );

        uint8 decimals = ERC20(redeemToken).decimals();
        for (uint256 i = 0; i < name.length; i++) {
            require(
                activationTimestamp[i] <= redeemTimestamp[i],
                "activationTimestamp cannot be more than redeemTimestamp"
            );

            BeaconProxy token = new BeaconProxy(address(this), "");
            ILiquidVestingToken(address(token)).initialize(
                name[i],
                symbol[i],
                decimals,
                _msgSender(),
                address(this),
                redeemToken,
                activationTimestamp[i],
                redeemTimestamp[i],
                addRecipientsType
            );

            vestingTokensByOriginalToken[redeemToken].push(address(token));
            emit VestingTokenCreated(redeemToken, address(token));
        }
    }
}

Contract Security Audit

No Contract Security Audit Submitted- Submit Audit Here

Contract ABI

[{"inputs":[{"internalType":"address","name":"beacon","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"stateMutability":"payable","type":"constructor"},{"stateMutability":"payable","type":"fallback"},{"stateMutability":"payable","type":"receive"}]

Contract Creation Code

Decompile Bytecode Switch to Opcodes View

608060405260405161089f38038061089f83398101604081905261002291610303565b61002c8282610033565b5050610510565b6100468261015e60201b6100311760201c565b61006b5760405162461bcd60e51b8152600401610062906103fc565b60405180910390fd5b6100ee826001600160a01b0316635c60da1b6040518163ffffffff1660e01b815260040160206040518083038186803b1580156100a757600080fd5b505afa1580156100bb573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906100df91906102e9565b61015e60201b6100311760201c565b61010a5760405162461bcd60e51b815260040161006290610487565b60008051602061085e8339815191528281558151156101595761015761012e610168565b8360405180606001604052806021815260200161087e602191396101e760201b6100371760201c565b505b505050565b803b15155b919050565b6000610172610286565b6001600160a01b0316635c60da1b6040518163ffffffff1660e01b815260040160206040518083038186803b1580156101aa57600080fd5b505afa1580156101be573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906101e291906102e9565b905090565b60606101f28461015e565b61020e5760405162461bcd60e51b815260040161006290610441565b600080856001600160a01b03168560405161022991906103ad565b600060405180830381855af49150503d8060008114610264576040519150601f19603f3d011682016040523d82523d6000602084013e610269565b606091505b50909250905061027a828286610299565b925050505b9392505050565b60008051602061085e8339815191525490565b606083156102a857508161027f565b8251156102b85782518084602001fd5b8160405162461bcd60e51b815260040161006291906103c9565b80516001600160a01b038116811461016357600080fd5b6000602082840312156102fa578081fd5b61027f826102d2565b60008060408385031215610315578081fd5b61031e836102d2565b60208401519092506001600160401b038082111561033a578283fd5b818501915085601f83011261034d578283fd5b81518181111561035957fe5b604051601f8201601f19168101602001838111828210171561037757fe5b60405281815283820160200188101561038e578485fd5b61039f8260208301602087016104e4565b809450505050509250929050565b600082516103bf8184602087016104e4565b9190910192915050565b60006020825282518060208401526103e88160408501602087016104e4565b601f01601f19169190910160400192915050565b60208082526025908201527f426561636f6e50726f78793a20626561636f6e206973206e6f74206120636f6e6040820152641d1c9858dd60da1b606082015260800190565b60208082526026908201527f416464726573733a2064656c65676174652063616c6c20746f206e6f6e2d636f6040820152651b9d1c9858dd60d21b606082015260800190565b60208082526034908201527f426561636f6e50726f78793a20626561636f6e20696d706c656d656e7461746960408201527f6f6e206973206e6f74206120636f6e7472616374000000000000000000000000606082015260800190565b60005b838110156104ff5781810151838201526020016104e7565b838111156101575750506000910152565b61033f8061051f6000396000f3fe60806040523661001357610011610017565b005b6100115b61001f61002f565b61002f61002a6100eb565b610177565b565b3b151590565b606061004284610031565b6100675760405162461bcd60e51b815260040161005e9061027c565b60405180910390fd5b6000808573ffffffffffffffffffffffffffffffffffffffff168560405161008f919061022d565b600060405180830381855af49150503d80600081146100ca576040519150601f19603f3d011682016040523d82523d6000602084013e6100cf565b606091505b50915091506100df82828661019b565b925050505b9392505050565b60006100f56101d4565b73ffffffffffffffffffffffffffffffffffffffff16635c60da1b6040518163ffffffff1660e01b815260040160206040518083038186803b15801561013a57600080fd5b505afa15801561014e573d6000803e3d6000fd5b505050506040513d601f19601f8201168201806040525081019061017291906101f9565b905090565b3660008037600080366000845af43d6000803e808015610196573d6000f35b3d6000fd5b606083156101aa5750816100e4565b8251156101ba5782518084602001fd5b8160405162461bcd60e51b815260040161005e9190610249565b7fa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d505490565b60006020828403121561020a578081fd5b815173ffffffffffffffffffffffffffffffffffffffff811681146100e4578182fd5b6000825161023f8184602087016102d9565b9190910192915050565b60006020825282518060208401526102688160408501602087016102d9565b601f01601f19169190910160400192915050565b60208082526026908201527f416464726573733a2064656c65676174652063616c6c20746f206e6f6e2d636f60408201527f6e74726163740000000000000000000000000000000000000000000000000000606082015260800190565b60005b838110156102f45781810151838201526020016102dc565b83811115610303576000848401525b5050505056fea26469706673582212207160d24c58fd0fbd0050e7e493dc043749f3fcbcd04445a8f489a673c5cdaf2b64736f6c63430007060033a3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50426561636f6e50726f78793a2066756e6374696f6e2063616c6c206661696c6564000000000000000000000000b3e0edda8c2aeabfdece18ad7ac1ea86eb7d583b00000000000000000000000000000000000000000000000000000000000000400000000000000000000000000000000000000000000000000000000000000000

Deployed Bytecode

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

Deployed Bytecode Sourcemap

13194:2781:0:-:0;;;;;;3210:11;:9;:11::i;:::-;13194:2781;;2979:11;2616:113;2665:17;:15;:17::i;:::-;2693:28;2703:17;:15;:17::i;:::-;2693:9;:28::i;:::-;2616:113::o;4341:444::-;4721:20;4769:8;;;4341:444::o;11056:457::-;11201:12;11234:18;11245:6;11234:10;:18::i;:::-;11226:69;;;;-1:-1:-1;;;11226:69:0;;;;;;;:::i;:::-;;;;;;;;;11369:12;11383:23;11410:6;:19;;11430:4;11410:25;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;11368:67;;;;11453:52;11471:7;11480:10;11492:12;11453:17;:52::i;:::-;11446:59;;;;11056:457;;;;;;:::o;14691:187::-;14803:7;14843:9;:7;:9::i;:::-;14835:33;;;:35;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;14828:42;;14691:187;:::o;1032:1092::-;1432:14;1429:1;1426;1413:34;1753:1;1733;1700:14;1680:1;1647:14;1623:5;1592:177;1846:16;1843:1;1840;1825:38;1886:6;1955:68;;;;2074:16;2071:1;2064:27;1955:68;1991:16;1988:1;1981:27;11521:777;11671:12;11700:7;11696:595;;;-1:-1:-1;11731:10:0;11724:17;;11696:595;11845:17;;:21;11841:439;;12108:10;12102:17;12169:15;12156:10;12152:2;12148:19;12141:44;12056:148;12244:20;;-1:-1:-1;;;12244:20:0;;;;12251:12;;12244:20;;;:::i;14348:235::-;13521:66;14554:11;;14529:47::o;14:333:1:-;;137:2;125:9;116:7;112:23;108:32;105:2;;;158:6;150;143:22;105:2;195:9;189:16;245:42;238:5;234:54;227:5;224:65;214:2;;308:6;300;293:22;352:274;;519:6;513:13;535:53;581:6;576:3;569:4;561:6;557:17;535:53;:::i;:::-;604:16;;;;;489:137;-1:-1:-1;;489:137:1:o;631:383::-;;780:2;769:9;762:21;812:6;806:13;855:6;850:2;839:9;835:18;828:34;871:66;930:6;925:2;914:9;910:18;905:2;897:6;893:15;871:66;:::i;:::-;998:2;977:15;-1:-1:-1;;973:29:1;958:45;;;;1005:2;954:54;;752:262;-1:-1:-1;;752:262:1:o;1019:402::-;1221:2;1203:21;;;1260:2;1240:18;;;1233:30;1299:34;1294:2;1279:18;;1272:62;1370:8;1365:2;1350:18;;1343:36;1411:3;1396:19;;1193:228::o;1426:258::-;1498:1;1508:113;1522:6;1519:1;1516:13;1508:113;;;1598:11;;;1592:18;1579:11;;;1572:39;1544:2;1537:10;1508:113;;;1639:6;1636:1;1633:13;1630:2;;;1674:1;1665:6;1660:3;1656:16;1649:27;1630:2;;1479:205;;;:::o

Swarm Source

ipfs://7160d24c58fd0fbd0050e7e493dc043749f3fcbcd04445a8f489a673c5cdaf2b

A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.

Tools & Services