Token

ulock.eth Wrapped Ether (UETH)

ERC-20

Overview

Max Total Supply

3,026,107.308595412383433732 UETH

Holders

Market

Onchain Market Cap

$0.00

Circulating Supply Market Cap

Other Info

Token Contract (WITH 18 Decimals)

0x395c8db957d743a62ac3aaaa4574553bcf2380b3

Filtered by Token Holder

0xE6C78983b07a07e0523b57E18AA23d3Ae2519E05

Uniswap V2: UETH-ULCK

Balance

3,000,000.303498494970661021 UETH

Value

$0.00

0xe6c78983b07a07e0523b57e18aa23d3ae2519e05

Click here to update the token information / general information

#	Exchange	Pair	Price	24H Volume	% Volume

Contract Source Code Verified (Exact Match)

Contract Name:

UETH

Compiler Version

v0.6.6+commit.6c089d02

Optimization Enabled:

Yes with 200 runs

Other Settings:

default evmVersion, GNU GPLv3 license

Contract Source Code (Solidity)

IDE

/**
 *Submitted for verification at Etherscan.io on 2020-12-04
*/

// Sources flattened with hardhat v2.0.3 https://hardhat.org

// File contracts/ERC20/Context.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File contracts/ERC20/IERC20.sol

// SPDX-License-Identifier: MIT
// adapted by udev

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File contracts/ERC20/SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}


// File contracts/ERC20/Address.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File contracts/ERC20/SafeERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// File contracts/ERC20/ERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
//Modified 2020 udev
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_, uint amount) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
        _mint(msg.sender, amount);
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


// File contracts/ERC20/ERC20TransferTax.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
//Modified 2020 udev
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20TransferTax is Context, IERC20 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    uint public taxBips;
    address public taxMan;
    mapping(address => bool) public isNotTaxed;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18. Sets {taxBips} tax rate in 1/10000 with {taxMan}
     * as tax receiver and tax status manager.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_, uint amount, address taxMan_, uint taxBips_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
        _mint(msg.sender, amount);
        taxMan = taxMan_;
        taxBips = taxBips_;
    }

    /**
     * @dev Sets tax status for account, both on send and receive.
     */
    function setIsTaxed(address account, bool isTaxed_) external {
        require(msg.sender == taxMan, "!taxMan");
        isNotTaxed[account] = !isTaxed_;
    }

    /**
     * @dev Changes the {taxMan}.
     */
    function transferTaxman(address taxMan_) external {
        require(msg.sender == taxMan, "!taxMan");
        taxMan = taxMan_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient` with {taxBips} to
     * {taxMan}.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        if(isNotTaxed[sender] || isNotTaxed[recipient]) {
            _beforeTokenTransfer(sender, recipient, amount);
            _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
            _balances[recipient] = _balances[recipient].add(amount);
            emit Transfer(sender, recipient, amount);
        } else {
            uint tax = amount.mul(taxBips).div(10000);
            uint postTaxAmount = amount.sub(tax);

            _beforeTokenTransfer(sender, recipient, postTaxAmount);
            _beforeTokenTransfer(sender, taxMan, tax);

            _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");

            _balances[recipient] = _balances[recipient].add(postTaxAmount);
            _balances[taxMan] = _balances[taxMan].add(tax);

            emit Transfer(sender, recipient, postTaxAmount);
            emit Transfer(sender, taxMan, tax);
        }        
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


// File contracts/interfaces/IUeth.sol

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity =0.6.6;
// Copyright (C) udev 2020
interface IUeth is IERC20 {
    function deposit() external payable;
    function ulockerMint(uint wad, address dst) external;
    function withdraw(uint wad) external;
    event Deposit(address indexed dst, uint wad);
    event Withdrawal(address indexed src, uint wad);
    event UlockerMint(uint wad, address dst);
}


// File contracts/ueth.sol

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity =0.6.6;
// Copyright (C) 2015, 2016, 2017 Dapphub / adapted by udev 2020
contract UETH is IUeth {
    string public name;
    string public symbol;
    uint8  public decimals;
    address ulocker;
    uint public override totalSupply;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public override balanceOf;
    mapping (address => mapping (address => uint))  public override allowance;
    
    constructor() public {
        name = "ulock.eth Wrapped Ether";
        symbol = "UETH";
        decimals = 18;
        ulocker = msg.sender;
    }

    receive() external payable {
        deposit();
    }
    
    function deposit() public payable override {
        balanceOf[msg.sender] += msg.value;
        totalSupply += msg.value;
        emit Deposit(msg.sender, msg.value);
    }

    function transferUlocker(address ulocker_) external {
        require(ulocker==msg.sender, "ulocker!=msg.sender");
        ulocker = ulocker_;
    }

    function ulockerMint(uint wad, address dst) external override {
        require(msg.sender == ulocker, "!ulocker");
        balanceOf[dst] += wad;
        totalSupply += wad;
        emit Transfer(address(0), dst, wad);
    }
    
    function withdraw(uint wad) external override {
        require(balanceOf[msg.sender] >= wad, "!balance");
        balanceOf[msg.sender] -= wad;
        totalSupply -= wad;
        (bool success, ) = msg.sender.call{value:wad}("");
        require(success, "!withdraw");
        emit Withdrawal(msg.sender, wad);
    }
    
    function _approve(address src, address guy, uint wad) internal {
        allowance[src][guy] = wad;
        emit Approval(src, guy, wad);
    }
    
    function approve(address guy, uint wad) external override returns (bool) {
        _approve(msg.sender, guy, wad); 
        return true;
    }
    
    function transfer(address dst, uint wad) external override returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }
    
    function transferFrom(address src, address dst, uint wad)
        public override
        returns (bool)
    {
        require(balanceOf[src] >= wad, "!balance");

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad, "!allowance");
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        emit Transfer(src, dst, wad);

        return true;
    }
}


// File contracts/Uniswap/IUniswapV2Pair.sol

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}


// File contracts/Uniswap/IUniswapV2Router01.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}


// File contracts/Uniswap/IUniswapV2Router02.sol

pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}


// File contracts/Uniswap/UniswapV2Library.sol

pragma solidity >=0.5.0;
library UniswapV2Library {
    using SafeMath for uint;

    // returns sorted token addresses, used to handle return values from pairs sorted in this order
    function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
        require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
        (token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
    }

    // calculates the CREATE2 address for a pair without making any external calls
    function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
        (address token0, address token1) = sortTokens(tokenA, tokenB);
        pair = address(uint(keccak256(abi.encodePacked(
                hex'ff',
                factory,
                keccak256(abi.encodePacked(token0, token1)),
                hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
            ))));
    }

    // fetches and sorts the reserves for a pair
    function getReserves(address factory, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
        (address token0,) = sortTokens(tokenA, tokenB);
        (uint reserve0, uint reserve1,) = IUniswapV2Pair(pairFor(factory, tokenA, tokenB)).getReserves();
        (reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
    }

    // given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
    function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
        require(amountA > 0, 'UniswapV2Library: INSUFFICIENT_AMOUNT');
        require(reserveA > 0 && reserveB > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        amountB = amountA.mul(reserveB) / reserveA;
    }

    // given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
        require(amountIn > 0, 'UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT');
        require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        uint amountInWithFee = amountIn.mul(997);
        uint numerator = amountInWithFee.mul(reserveOut);
        uint denominator = reserveIn.mul(1000).add(amountInWithFee);
        amountOut = numerator / denominator;
    }

    // given an output amount of an asset and pair reserves, returns a required input amount of the other asset
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
        require(amountOut > 0, 'UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT');
        require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        uint numerator = reserveIn.mul(amountOut).mul(1000);
        uint denominator = reserveOut.sub(amountOut).mul(997);
        amountIn = (numerator / denominator).add(1);
    }

    // performs chained getAmountOut calculations on any number of pairs
    function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
        require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
        amounts = new uint[](path.length);
        amounts[0] = amountIn;
        for (uint i; i < path.length - 1; i++) {
            (uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
            amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
        }
    }

    // performs chained getAmountIn calculations on any number of pairs
    function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
        require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
        amounts = new uint[](path.length);
        amounts[amounts.length - 1] = amountOut;
        for (uint i = path.length - 1; i > 0; i--) {
            (uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
            amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
        }
    }
}


// File contracts/interfaces/IUlocker.sol

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity =0.6.6;
// Copyright (C) udev 2020
interface IUlocker {
    function launchERC20(string calldata name, string calldata symbol, uint wadToken, uint wadUeth) external returns (address token_, address pair_);
    function launchERC20TransferTax(string calldata name, string calldata symbol, uint wadToken, uint wadUeth, uint taxBips, address taxMan) external returns (address token_, address pair_);
}


// File contracts/ulocker.sol

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity =0.6.6;
contract ULOCKER is IUlocker {

    using SafeMath for uint;

    IUniswapV2Router02 private _uniswapRouter;
    IUeth private _ueth;
    address private _uniswapFactory;
    
    address private udev1;
    address private udev2;
    address private udev3;

    mapping(address => uint) public pairSwept;
    mapping(address => bool) public pairRegistered;
    address[] public allRegisteredPairs;
    uint public totalRegisteredPairs;

    constructor (IUeth ueth_) public {
        _uniswapRouter = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        _uniswapFactory = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f;
        _ueth = ueth_;
    
        udev1 = 0x73A07158324782a39D2DCd5b8d9160B8E3018B7D;
        udev2 = 0xd1ccC07177c0c27aB78cF991bA6C4eb4EdC68F31;
        udev3 = 0xcc2Faea967B5b51151b7B070f6288Ad06f96bA42;
    }
    
    function launchERC20(string calldata name, string calldata symbol, uint wadToken, uint wadUeth) external override returns (address token_, address pair_) {
        //Checks
        _preLaunchChecks(wadToken, wadUeth);

        //Launch new token
        token_ = address(new ERC20(name, symbol, wadToken));

        //Lock symbol/ueth liquidity
        pair_ = _lockLiquidity(wadToken, wadUeth, token_);

        //Register pair for sweeping
        _registerPair(pair_);
        
        return (token_, pair_);
    }
    
    function launchERC20TransferTax(string calldata name, string calldata symbol, uint wadToken, uint wadUeth, uint taxBips, address taxMan) external override returns (address token_, address pair_) {
        //Checks
        _preLaunchChecks(wadToken, wadUeth);
        require(taxBips <= 1000, "taxBips>1000");

        //Launch new token
        ERC20TransferTax token = new ERC20TransferTax(name, symbol, wadToken, address(this), taxBips);
        token.setIsTaxed(address(this), false);
        token.transferTaxman(taxMan);
        token_ = address(token);

        //Lock symbol/ueth liquidity
        pair_ = _lockLiquidity(wadToken, wadUeth, token_);

        //Register pair for sweeping
        _registerPair(pair_);
        
        return (token_, pair_);
    }

    //Sweeps liquidity provider fees for udev
    function sweep(IUniswapV2Pair[] calldata pairs) external {
        require(pairs.length < 256, "pairs.length>=256");
        uint8 i;
        for(i = 0; i < pairs.length; i++) {
            IUniswapV2Pair pair = pairs[i];

            uint availableToSweep = sweepAmountAvailable(pair);
            if(availableToSweep != 0){
                pairSwept[address(pair)] += availableToSweep;
                uint sweepPerUdev = availableToSweep/4;
                _ueth.ulockerMint(sweepPerUdev, udev1);
                _ueth.ulockerMint(sweepPerUdev*2, udev2);
                _ueth.ulockerMint(sweepPerUdev, udev3);
            }

        }
    }

    //Checks pair for sweep amount available
    function sweepAmountAvailable(IUniswapV2Pair pair) public view returns (uint amountAvailable) {
        require(pairRegistered[address(pair)], "!pairRegistered[pair]");
        
        bool uethIsToken0 = false;
        IERC20 token;
        if(pair.token0() == address(_ueth)) {
            uethIsToken0 = true;
            token = IERC20(pair.token1());
        } else {
            require(pair.token1() == address(_ueth), "!pair.tokenX==address(_ueth)");
            token = IERC20(pair.token0());
        }

        (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast) = pair.getReserves();

        uint burnedLP = pair.balanceOf(address(0));
        uint totalLP = pair.totalSupply();

        uint reserveLockedUeth = uint(uethIsToken0 ? reserve0 : reserve1).mul(burnedLP).div(totalLP);
        uint reserveLockedToken = uint(uethIsToken0 ? reserve1 : reserve0).mul(burnedLP).div(totalLP);

        uint burnedUeth;
        if(reserveLockedToken == token.totalSupply()) {
            burnedUeth = reserveLockedUeth;
        }else{
            burnedUeth = reserveLockedUeth.sub(
                UniswapV2Library.getAmountOut(
                    //Circulating supply, max that could ever be sold (amountIn)
                    token.totalSupply().sub(reserveLockedToken),
                    //Burned token in Uniswap reserves (reserveIn)
                    reserveLockedToken,
                    //Burned uEth in Uniswap reserves (reserveOut)
                    reserveLockedUeth
                )
            );
        }

        return burnedUeth.sub(pairSwept[address(pair)]);
    }

    function _preLaunchChecks(uint wadToken, uint wadUeth) internal pure {
        require(wadToken <= 2 ** 100, "wadToken>2**100");
        require(wadUeth <= 2 ** 100, "wadUeth>2**100");
    }

    function _lockLiquidity(uint wadToken, uint wadUeth, address token) internal returns (address pair) {
        _ueth.ulockerMint(wadUeth, address(this));

        IERC20(token).approve(address(_uniswapRouter), wadToken);
        _ueth.approve(address(_uniswapRouter), wadUeth);

        _uniswapRouter.addLiquidity(
            token,
            address(_ueth),
            wadToken,
            wadUeth,
            wadToken,
            wadUeth,
            address(0),
            now
        );

        pair = UniswapV2Library.pairFor(_uniswapFactory, token, address(_ueth));
        pairSwept[pair] = wadUeth;
        return pair;
    }

    function _registerPair(address pair) internal {
        pairRegistered[pair] = true;
        allRegisteredPairs.push(pair);
        totalRegisteredPairs = totalRegisteredPairs.add(1);
    }
}

Contract Security Audit

No Contract Security Audit Submitted- Submit Audit Here

Contract ABI

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":true,"internalType":"address","name":"guy","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"dst","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":true,"internalType":"address","name":"dst","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"},{"indexed":false,"internalType":"address","name":"dst","type":"address"}],"name":"UlockerMint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Withdrawal","type":"event"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"guy","type":"address"},{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"deposit","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"dst","type":"address"},{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"src","type":"address"},{"internalType":"address","name":"dst","type":"address"},{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"ulocker_","type":"address"}],"name":"transferUlocker","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"wad","type":"uint256"},{"internalType":"address","name":"dst","type":"address"}],"name":"ulockerMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

Contract Creation Code

Decompile Bytecode Switch to Opcodes View

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

Deployed Bytecode

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

Deployed Bytecode Sourcemap

45468:2724:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46264:9;:7;:9::i;:::-;45468:2724;;12:1:-1;9;2:12;45498:18:0;;5:9:-1;2:2;;;27:1;24;17:12;2:2;45498:18:0;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;8:100:-1;33:3;30:1;27:10;8:100;;;90:11;;;84:18;71:11;;;64:39;52:2;45:10;8:100;;;12:14;45498:18:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47374:145;;5:9:-1;2:2;;;27:1;24;17:12;2:2;47374:145:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;;;;;;47374:145:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;45601:32;;5:9:-1;2:2;;;27:1;24;17:12;2:2;45601:32:0;;;:::i;:::-;;;;;;;;;;;;;;;;47677:512;;5:9:-1;2:2;;;27:1;24;17:12;2:2;47677:512:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;;;;;;47677:512:0;;;;;;;;;;;;;;;;;:::i;46637:230::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;46637:230:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;46637:230:0;;;;;;-1:-1:-1;;;;;46637:230:0;;:::i;46879:325::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;46879:325:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;46879:325:0;;:::i;45550:22::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;45550:22:0;;;:::i;:::-;;;;;;;;;;;;;;;;;;;45899:73;;5:9:-1;2:2;;;27:1;24;17:12;2:2;45899:73:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;45899:73:0;-1:-1:-1;;;;;45899:73:0;;:::i;45523:20::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;45523:20:0;;;:::i;47531:134::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;47531:134:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;;;;;;47531:134:0;;;;;;;;:::i;46293:177::-;;;:::i;45979:73::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;45979:73:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;;;;;;45979:73:0;;;;;;;;;;:::i;46478:151::-;;5:9:-1;2:2;;;27:1;24;17:12;2:2;46478:151:0;;;;;;15:2:-1;10:3;7:11;4:2;;;31:1;28;21:12;4:2;-1:-1;46478:151:0;-1:-1:-1;;;;;46478:151:0;;:::i;46293:177::-;46357:10;46347:21;;;;:9;:21;;;;;;;;;:34;;46372:9;46347:34;;;;;;46392:11;:24;;;;;;46432:30;;;;;;;;;;;;;;;;;46293:177::o;45498:18::-;;;;;;;;;;;;;;;-1:-1:-1;;45498:18:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;47374:145::-;47441:4;47458:30;47467:10;47479:3;47484;47458:8;:30::i;:::-;-1:-1:-1;47507:4:0;47374:145;;;;:::o;45601:32::-;;;;:::o;47677:512::-;-1:-1:-1;;;;;47808:14:0;;47778:4;47808:14;;;:9;:14;;;;;;:21;-1:-1:-1;47808:21:0;47800:42;;;;;-1:-1:-1;;;47800:42:0;;;;;;;;;;;;-1:-1:-1;;;47800:42:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;47859:17:0;;47866:10;47859:17;;;;:59;;-1:-1:-1;;;;;;47880:14:0;;;;;;:9;:14;;;;;;;;47895:10;47880:26;;;;;;;;-1:-1:-1;;47880:38:0;;47859:59;47855:196;;;-1:-1:-1;;;;;47943:14:0;;;;;;:9;:14;;;;;;;;47958:10;47943:26;;;;;;;;:33;-1:-1:-1;47943:33:0;47935:56;;;;;-1:-1:-1;;;47935:56:0;;;;;;;;;;;;-1:-1:-1;;;47935:56:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;48006:14:0;;;;;;:9;:14;;;;;;;;48021:10;48006:26;;;;;;;:33;;;;;;;47855:196;-1:-1:-1;;;;;48063:14:0;;;;;;;:9;:14;;;;;;;;:21;;;;;;;48095:14;;;;;;;;;;:21;;;;;;48134:23;;;;;;;48095:14;;48134:23;;;;;;;;;;;-1:-1:-1;48177:4:0;47677:512;;;;;:::o;46637:230::-;46732:7;;;;;-1:-1:-1;;;;;46732:7:0;46718:10;:21;46710:42;;;;;-1:-1:-1;;;46710:42:0;;;;;;;;;;;;-1:-1:-1;;;46710:42:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;46763:14:0;;;;;;:9;:14;;;;;;;;:21;;;;;;46795:11;:18;;;;;;46829:30;;;;;;;;;;;;;;;;;;46637:230;;:::o;46879:325::-;46954:10;46944:21;;;;:9;:21;;;;;;:28;-1:-1:-1;46944:28:0;46936:49;;;;;-1:-1:-1;;;46936:49:0;;;;;;;;;;;;-1:-1:-1;;;46936:49:0;;;;;;;;;;;;;;;47006:10;46996:21;;;;:9;:21;;;;;;:28;;;;;;;47035:11;:18;;;;;;;47083:30;46996:21;;47006:10;47021:3;;46996:21;47083:30;46996:21;47083:30;47021:3;47006:10;47083:30;;;;;;;12:1:-1;19;14:27;;;;67:4;61:11;56:16;;134:4;130:9;123:4;105:16;101:27;97:43;94:1;90:51;84:4;77:65;157:16;154:1;147:27;211:16;208:1;201:4;198:1;194:12;179:49;5:228;;14:27;32:4;27:9;;5:228;;47064:49:0;;;47132:7;47124:29;;;;;-1:-1:-1;;;47124:29:0;;;;;;;;;;;;-1:-1:-1;;;47124:29:0;;;;;;;;;;;;;;;47169:27;;;;;;;;47180:10;;47169:27;;;;;;;;;;46879:325;;:::o;45550:22::-;;;;;;:::o;45899:73::-;;;;;;;;;;;;;:::o;45523:20::-;;;;;;;;;;;;;;;-1:-1:-1;;45523:20:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47531:134;47599:4;47623:34;47636:10;47648:3;47653;47623:12;:34::i;:::-;47616:41;47531:134;-1:-1:-1;;;47531:134:0:o;45979:73::-;;;;;;;;;;;;;;;;;;;;;;;;:::o;46478:151::-;46549:7;;;;;-1:-1:-1;;;;;46549:7:0;46558:10;46549:19;46541:51;;;;;-1:-1:-1;;;46541:51:0;;;;;;;;;;;;-1:-1:-1;;;46541:51:0;;;;;;;;;;;;;;;46603:7;:18;;-1:-1:-1;;;;;46603:18:0;;;;;-1:-1:-1;;;;;;46603:18:0;;;;;;;;;46478:151::o;47216:146::-;-1:-1:-1;;;;;47290:14:0;;;;;;;:9;:14;;;;;;;;:19;;;;;;;;;;;;;:25;;;47331:23;;;;;;;;;;;;;;;;;47216:146;;;:::o

Swarm Source

ipfs://38fed3e75435b169e6bc315d54c185874a60c9df05e0829daabf23a3c45ce77d

A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.

Tools & Services