Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { ERC721 } from "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import { UD60x18, ud } from "@prb/math/src/UD60x18.sol";

import { SablierV2Lockup } from "./abstracts/SablierV2Lockup.sol";
import { SablierV2Lockup } from "./abstracts/SablierV2Lockup.sol";
import { ISablierV2LockupLinear } from "./interfaces/ISablierV2LockupLinear.sol";
import { ISablierV2NFTDescriptor } from "./interfaces/ISablierV2NFTDescriptor.sol";
import { Helpers } from "./libraries/Helpers.sol";
import { Lockup, LockupLinear } from "./types/DataTypes.sol";

/*

███████╗ █████╗ ██████╗ ██╗     ██╗███████╗██████╗     ██╗   ██╗██████╗
██╔════╝██╔══██╗██╔══██╗██║     ██║██╔════╝██╔══██╗    ██║   ██║╚════██╗
███████╗███████║██████╔╝██║     ██║█████╗  ██████╔╝    ██║   ██║ █████╔╝
╚════██║██╔══██║██╔══██╗██║     ██║██╔══╝  ██╔══██╗    ╚██╗ ██╔╝██╔═══╝
███████║██║  ██║██████╔╝███████╗██║███████╗██║  ██║     ╚████╔╝ ███████╗
╚══════╝╚═╝  ╚═╝╚═════╝ ╚══════╝╚═╝╚══════╝╚═╝  ╚═╝      ╚═══╝  ╚══════╝

██╗      ██████╗  ██████╗██╗  ██╗██╗   ██╗██████╗     ██╗     ██╗███╗   ██╗███████╗ █████╗ ██████╗
██║     ██╔═══██╗██╔════╝██║ ██╔╝██║   ██║██╔══██╗    ██║     ██║████╗  ██║██╔════╝██╔══██╗██╔══██╗
██║     ██║   ██║██║     █████╔╝ ██║   ██║██████╔╝    ██║     ██║██╔██╗ ██║█████╗  ███████║██████╔╝
██║     ██║   ██║██║     ██╔═██╗ ██║   ██║██╔═══╝     ██║     ██║██║╚██╗██║██╔══╝  ██╔══██║██╔══██╗
███████╗╚██████╔╝╚██████╗██║  ██╗╚██████╔╝██║         ███████╗██║██║ ╚████║███████╗██║  ██║██║  ██║
╚══════╝ ╚═════╝  ╚═════╝╚═╝  ╚═╝ ╚═════╝ ╚═╝         ╚══════╝╚═╝╚═╝  ╚═══╝╚══════╝╚═╝  ╚═╝╚═╝  ╚═╝

*/

/// @title SablierV2LockupLinear
/// @notice See the documentation in {ISablierV2LockupLinear}.
contract SablierV2LockupLinear is
    ISablierV2LockupLinear, // 5 inherited components
    SablierV2Lockup // 14 inherited components
{
    using SafeERC20 for IERC20;

    /*//////////////////////////////////////////////////////////////////////////
                                  STATE VARIABLES
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Cliff times mapped by stream IDs. This complements the `_streams` mapping in {SablierV2Lockup}.
    mapping(uint256 id => uint40 cliff) internal _cliffs;

    /*//////////////////////////////////////////////////////////////////////////
                                     CONSTRUCTOR
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Emits a {TransferAdmin} event.
    /// @param initialAdmin The address of the initial contract admin.
    /// @param initialNFTDescriptor The address of the initial NFT descriptor.
    constructor(
        address initialAdmin,
        ISablierV2NFTDescriptor initialNFTDescriptor
    )
        ERC721("Sablier V2 Lockup Linear NFT", "SAB-V2-LOCKUP-LIN")
        SablierV2Lockup(initialAdmin, initialNFTDescriptor)
    {
        nextStreamId = 1;
    }

    /*//////////////////////////////////////////////////////////////////////////
                           USER-FACING CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2LockupLinear
    function getCliffTime(uint256 streamId) external view override notNull(streamId) returns (uint40 cliffTime) {
        cliffTime = _cliffs[streamId];
    }

    /// @inheritdoc ISablierV2LockupLinear
    function getStream(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (LockupLinear.StreamLL memory stream)
    {
        // Retrieve the Lockup stream from storage.
        Lockup.Stream memory lockupStream = _streams[streamId];

        // Settled streams cannot be canceled.
        if (_statusOf(streamId) == Lockup.Status.SETTLED) {
            lockupStream.isCancelable = false;
        }

        stream = LockupLinear.StreamLL({
            amounts: lockupStream.amounts,
            asset: lockupStream.asset,
            cliffTime: _cliffs[streamId],
            endTime: lockupStream.endTime,
            isCancelable: lockupStream.isCancelable,
            isTransferable: lockupStream.isTransferable,
            isDepleted: lockupStream.isDepleted,
            isStream: lockupStream.isStream,
            recipient: _ownerOf(streamId),
            sender: lockupStream.sender,
            startTime: lockupStream.startTime,
            wasCanceled: lockupStream.wasCanceled
        });
    }

    /// @inheritdoc ISablierV2LockupLinear
    function getTimestamps(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (LockupLinear.Timestamps memory timestamps)
    {
        timestamps = LockupLinear.Timestamps({
            start: _streams[streamId].startTime,
            cliff: _cliffs[streamId],
            end: _streams[streamId].endTime
        });
    }

    /*//////////////////////////////////////////////////////////////////////////
                         USER-FACING NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2LockupLinear
    function createWithDurations(LockupLinear.CreateWithDurations calldata params)
        external
        override
        noDelegateCall
        returns (uint256 streamId)
    {
        // Set the current block timestamp as the stream's start time.
        LockupLinear.Timestamps memory timestamps;
        timestamps.start = uint40(block.timestamp);

        // Calculate the cliff time and the end time. It is safe to use unchecked arithmetic because {_create} will
        // nonetheless check that the end time is greater than the cliff time, and also that the cliff time, if set,
        // is greater than or equal to the start time.
        unchecked {
            if (params.durations.cliff > 0) {
                timestamps.cliff = timestamps.start + params.durations.cliff;
            }
            timestamps.end = timestamps.start + params.durations.total;
        }

        // Checks, Effects and Interactions: create the stream.
        streamId = _create(
            LockupLinear.CreateWithTimestamps({
                sender: params.sender,
                recipient: params.recipient,
                totalAmount: params.totalAmount,
                asset: params.asset,
                cancelable: params.cancelable,
                transferable: params.transferable,
                timestamps: timestamps,
                broker: params.broker
            })
        );
    }

    /// @inheritdoc ISablierV2LockupLinear
    function createWithTimestamps(LockupLinear.CreateWithTimestamps calldata params)
        external
        override
        noDelegateCall
        returns (uint256 streamId)
    {
        // Checks, Effects and Interactions: create the stream.
        streamId = _create(params);
    }

    /*//////////////////////////////////////////////////////////////////////////
                           INTERNAL CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc SablierV2Lockup
    /// @dev The distribution function is:
    ///
    /// $$
    /// f(x) = x * d + c
    /// $$
    ///
    /// Where:
    ///
    /// - $x$ is the elapsed time divided by the stream's total duration.
    /// - $d$ is the deposited amount.
    /// - $c$ is the cliff amount.
    function _calculateStreamedAmount(uint256 streamId) internal view override returns (uint128) {
        uint256 cliffTime = uint256(_cliffs[streamId]);
        uint256 startTime = uint256(_streams[streamId].startTime);
        uint256 blockTimestamp = block.timestamp;

        // If the cliff time or the start time is in the future, return zero.
        if (cliffTime > blockTimestamp || startTime >= blockTimestamp) {
            return 0;
        }

        // If the end time is not in the future, return the deposited amount.
        uint256 endTime = uint256(_streams[streamId].endTime);
        if (blockTimestamp >= endTime) {
            return _streams[streamId].amounts.deposited;
        }

        // In all other cases, calculate the amount streamed so far. Normalization to 18 decimals is not needed
        // because there is no mix of amounts with different decimals.
        unchecked {
            // Calculate how much time has passed since the stream started, and the stream's total duration.
            UD60x18 elapsedTime = ud(blockTimestamp - startTime);
            UD60x18 totalDuration = ud(endTime - startTime);

            // Divide the elapsed time by the stream's total duration.
            UD60x18 elapsedTimePercentage = elapsedTime.div(totalDuration);

            // Cast the deposited amount to UD60x18.
            UD60x18 depositedAmount = ud(_streams[streamId].amounts.deposited);

            // Calculate the streamed amount by multiplying the elapsed time percentage by the deposited amount.
            UD60x18 streamedAmount = elapsedTimePercentage.mul(depositedAmount);

            // Although the streamed amount should never exceed the deposited amount, this condition is checked
            // without asserting to avoid locking assets in case of a bug. If this situation occurs, the withdrawn
            // amount is considered to be the streamed amount, and the stream is effectively frozen.
            if (streamedAmount.gt(depositedAmount)) {
                return _streams[streamId].amounts.withdrawn;
            }

            // Cast the streamed amount to uint128. This is safe due to the check above.
            return uint128(streamedAmount.intoUint256());
        }
    }

    /*//////////////////////////////////////////////////////////////////////////
                           INTERNAL NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev See the documentation for the user-facing functions that call this internal function.
    function _create(LockupLinear.CreateWithTimestamps memory params) internal returns (uint256 streamId) {
        // Check: verify the broker fee and calculate the amounts.
        Lockup.CreateAmounts memory createAmounts =
            Helpers.checkAndCalculateBrokerFee(params.totalAmount, params.broker.fee, MAX_BROKER_FEE);

        // Check: validate the user-provided parameters.
        Helpers.checkCreateLockupLinear(createAmounts.deposit, params.timestamps);

        // Load the stream ID.
        streamId = nextStreamId;

        // Effect: create the stream.
        _streams[streamId] = Lockup.Stream({
            amounts: Lockup.Amounts({ deposited: createAmounts.deposit, refunded: 0, withdrawn: 0 }),
            asset: params.asset,
            endTime: params.timestamps.end,
            isCancelable: params.cancelable,
            isDepleted: false,
            isStream: true,
            isTransferable: params.transferable,
            sender: params.sender,
            startTime: params.timestamps.start,
            wasCanceled: false
        });

        // Effect: set the cliff time if it is greater than zero.
        if (params.timestamps.cliff > 0) {
            _cliffs[streamId] = params.timestamps.cliff;
        }

        // Effect: bump the next stream ID.
        // Using unchecked arithmetic because these calculations cannot realistically overflow, ever.
        unchecked {
            nextStreamId = streamId + 1;
        }

        // Effect: mint the NFT to the recipient.
        _mint({ to: params.recipient, tokenId: streamId });

        // Interaction: transfer the deposit amount.
        params.asset.safeTransferFrom({ from: msg.sender, to: address(this), value: createAmounts.deposit });

        // Interaction: pay the broker fee, if not zero.
        if (createAmounts.brokerFee > 0) {
            params.asset.safeTransferFrom({ from: msg.sender, to: params.broker.account, value: createAmounts.brokerFee });
        }

        // Log the newly created stream.
        emit ISablierV2LockupLinear.CreateLockupLinearStream({
            streamId: streamId,
            funder: msg.sender,
            sender: params.sender,
            recipient: params.recipient,
            amounts: createAmounts,
            asset: params.asset,
            cancelable: params.cancelable,
            transferable: params.transferable,
            timestamps: params.timestamps,
            broker: params.broker.account
        });
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.20;

import {IERC721} from "./IERC721.sol";
import {IERC721Receiver} from "./IERC721Receiver.sol";
import {IERC721Metadata} from "./extensions/IERC721Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {Strings} from "../../utils/Strings.sol";
import {IERC165, ERC165} from "../../utils/introspection/ERC165.sol";
import {IERC721Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
abstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    mapping(uint256 tokenId => address) private _owners;

    mapping(address owner => uint256) private _balances;

    mapping(uint256 tokenId => address) private _tokenApprovals;

    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual returns (uint256) {
        if (owner == address(0)) {
            revert ERC721InvalidOwner(address(0));
        }
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual returns (address) {
        return _requireOwned(tokenId);
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {
        _requireOwned(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual {
        _approve(to, tokenId, _msgSender());
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual returns (address) {
        _requireOwned(tokenId);

        return _getApproved(tokenId);
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        address previousOwner = _update(to, tokenId, _msgSender());
        if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {
        transferFrom(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     *
     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the
     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances
     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by
     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.
     */
    function _getApproved(uint256 tokenId) internal view virtual returns (address) {
        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in
     * particular (ignoring whether it is owned by `owner`).
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {
        return
            spender != address(0) &&
            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);
    }

    /**
     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.
     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets
     * the `spender` for the specific `tokenId`.
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {
        if (!_isAuthorized(owner, spender, tokenId)) {
            if (owner == address(0)) {
                revert ERC721NonexistentToken(tokenId);
            } else {
                revert ERC721InsufficientApproval(spender, tokenId);
            }
        }
    }

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that
     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.
     *
     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the
     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership
     * remain consistent with one another.
     */
    function _increaseBalance(address account, uint128 value) internal virtual {
        unchecked {
            _balances[account] += value;
        }
    }

    /**
     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner
     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that
     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).
     *
     * Emits a {Transfer} event.
     *
     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.
     */
    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {
        address from = _ownerOf(tokenId);

        // Perform (optional) operator check
        if (auth != address(0)) {
            _checkAuthorized(from, auth, tokenId);
        }

        // Execute the update
        if (from != address(0)) {
            // Clear approval. No need to re-authorize or emit the Approval event
            _approve(address(0), tokenId, address(0), false);

            unchecked {
                _balances[from] -= 1;
            }
        }

        if (to != address(0)) {
            unchecked {
                _balances[to] += 1;
            }
        }

        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        return from;
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner != address(0)) {
            revert ERC721InvalidSender(address(0));
        }
    }

    /**
     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        _checkOnERC721Received(address(0), to, tokenId, data);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal {
        address previousOwner = _update(address(0), tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        } else if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients
     * are aware of the ERC721 standard to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is like {safeTransferFrom} in the sense that it invokes
     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `tokenId` token must exist and be owned by `from`.
     * - `to` cannot be the zero address.
     * - `from` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId) internal {
        _safeTransfer(from, to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is
     * either the owner of the token, or approved to operate on all tokens held by this owner.
     *
     * Emits an {Approval} event.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address to, uint256 tokenId, address auth) internal {
        _approve(to, tokenId, auth, true);
    }

    /**
     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not
     * emitted in the context of transfers.
     */
    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {
        // Avoid reading the owner unless necessary
        if (emitEvent || auth != address(0)) {
            address owner = _requireOwned(tokenId);

            // We do not use _isAuthorized because single-token approvals should not be able to call approve
            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {
                revert ERC721InvalidApprover(auth);
            }

            if (emitEvent) {
                emit Approval(owner, to, tokenId);
            }
        }

        _tokenApprovals[tokenId] = to;
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Requirements:
     * - operator can't be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        if (operator == address(0)) {
            revert ERC721InvalidOperator(operator);
        }
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).
     * Returns the owner.
     *
     * Overrides to ownership logic should be done to {_ownerOf}.
     */
    function _requireOwned(uint256 tokenId) internal view returns (address) {
        address owner = _ownerOf(tokenId);
        if (owner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
        return owner;
    }

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the
     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {
        if (to.code.length > 0) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                if (retval != IERC721Receiver.onERC721Received.selector) {
                    revert ERC721InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert ERC721InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

/*

██████╗ ██████╗ ██████╗ ███╗   ███╗ █████╗ ████████╗██╗  ██╗
██╔══██╗██╔══██╗██╔══██╗████╗ ████║██╔══██╗╚══██╔══╝██║  ██║
██████╔╝██████╔╝██████╔╝██╔████╔██║███████║   ██║   ███████║
██╔═══╝ ██╔══██╗██╔══██╗██║╚██╔╝██║██╔══██║   ██║   ██╔══██║
██║     ██║  ██║██████╔╝██║ ╚═╝ ██║██║  ██║   ██║   ██║  ██║
╚═╝     ╚═╝  ╚═╝╚═════╝ ╚═╝     ╚═╝╚═╝  ╚═╝   ╚═╝   ╚═╝  ╚═╝

██╗   ██╗██████╗  ██████╗  ██████╗ ██╗  ██╗ ██╗ █████╗
██║   ██║██╔══██╗██╔════╝ ██╔═████╗╚██╗██╔╝███║██╔══██╗
██║   ██║██║  ██║███████╗ ██║██╔██║ ╚███╔╝ ╚██║╚█████╔╝
██║   ██║██║  ██║██╔═══██╗████╔╝██║ ██╔██╗  ██║██╔══██╗
╚██████╔╝██████╔╝╚██████╔╝╚██████╔╝██╔╝ ██╗ ██║╚█████╔╝
 ╚═════╝ ╚═════╝  ╚═════╝  ╚═════╝ ╚═╝  ╚═╝ ╚═╝ ╚════╝

*/

import "./ud60x18/Casting.sol";
import "./ud60x18/Constants.sol";
import "./ud60x18/Conversions.sol";
import "./ud60x18/Errors.sol";
import "./ud60x18/Helpers.sol";
import "./ud60x18/Math.sol";
import "./ud60x18/ValueType.sol";

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { ERC721 } from "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import { IERC721Metadata } from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import { UD60x18 } from "@prb/math/src/UD60x18.sol";

import { ISablierLockupRecipient } from "../interfaces/ISablierLockupRecipient.sol";
import { ISablierV2Lockup } from "../interfaces/ISablierV2Lockup.sol";
import { ISablierV2NFTDescriptor } from "../interfaces/ISablierV2NFTDescriptor.sol";
import { Errors } from "../libraries/Errors.sol";
import { Lockup } from "../types/DataTypes.sol";
import { Adminable } from "./Adminable.sol";
import { NoDelegateCall } from "./NoDelegateCall.sol";

/// @title SablierV2Lockup
/// @notice See the documentation in {ISablierV2Lockup}.
abstract contract SablierV2Lockup is
    NoDelegateCall, // 0 inherited components
    Adminable, // 1 inherited components
    ISablierV2Lockup, // 7 inherited components
    ERC721 // 6 inherited components
{
    using SafeERC20 for IERC20;

    /*//////////////////////////////////////////////////////////////////////////
                                  STATE VARIABLES
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2Lockup
    UD60x18 public constant override MAX_BROKER_FEE = UD60x18.wrap(0.1e18);

    /// @inheritdoc ISablierV2Lockup
    uint256 public override nextStreamId;

    /// @inheritdoc ISablierV2Lockup
    ISablierV2NFTDescriptor public override nftDescriptor;

    /// @dev Mapping of contracts allowed to hook to Sablier when a stream is canceled or when assets are withdrawn.
    mapping(address recipient => bool allowed) internal _allowedToHook;

    /// @dev Sablier V2 Lockup streams mapped by unsigned integers.
    mapping(uint256 id => Lockup.Stream stream) internal _streams;

    /*//////////////////////////////////////////////////////////////////////////
                                     CONSTRUCTOR
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Emits a {TransferAdmin} event.
    /// @param initialAdmin The address of the initial contract admin.
    /// @param initialNFTDescriptor The address of the initial NFT descriptor.
    constructor(address initialAdmin, ISablierV2NFTDescriptor initialNFTDescriptor) {
        admin = initialAdmin;
        nftDescriptor = initialNFTDescriptor;
        emit TransferAdmin({ oldAdmin: address(0), newAdmin: initialAdmin });
    }

    /*//////////////////////////////////////////////////////////////////////////
                                      MODIFIERS
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Checks that `streamId` does not reference a null stream.
    modifier notNull(uint256 streamId) {
        if (!_streams[streamId].isStream) {
            revert Errors.SablierV2Lockup_Null(streamId);
        }
        _;
    }

    /*//////////////////////////////////////////////////////////////////////////
                           USER-FACING CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2Lockup
    function getAsset(uint256 streamId) external view override notNull(streamId) returns (IERC20 asset) {
        asset = _streams[streamId].asset;
    }

    /// @inheritdoc ISablierV2Lockup
    function getDepositedAmount(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (uint128 depositedAmount)
    {
        depositedAmount = _streams[streamId].amounts.deposited;
    }

    /// @inheritdoc ISablierV2Lockup
    function getEndTime(uint256 streamId) external view override notNull(streamId) returns (uint40 endTime) {
        endTime = _streams[streamId].endTime;
    }

    /// @inheritdoc ISablierV2Lockup
    function getRecipient(uint256 streamId) external view override returns (address recipient) {
        // Check the stream NFT exists and return the owner, which is the stream's recipient.
        recipient = _requireOwned({ tokenId: streamId });
    }

    /// @inheritdoc ISablierV2Lockup
    function getRefundedAmount(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (uint128 refundedAmount)
    {
        refundedAmount = _streams[streamId].amounts.refunded;
    }

    /// @inheritdoc ISablierV2Lockup
    function getSender(uint256 streamId) external view override notNull(streamId) returns (address sender) {
        sender = _streams[streamId].sender;
    }

    /// @inheritdoc ISablierV2Lockup
    function getStartTime(uint256 streamId) external view override notNull(streamId) returns (uint40 startTime) {
        startTime = _streams[streamId].startTime;
    }

    /// @inheritdoc ISablierV2Lockup
    function getWithdrawnAmount(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (uint128 withdrawnAmount)
    {
        withdrawnAmount = _streams[streamId].amounts.withdrawn;
    }

    /// @inheritdoc ISablierV2Lockup
    function isAllowedToHook(address recipient) external view returns (bool result) {
        result = _allowedToHook[recipient];
    }

    /// @inheritdoc ISablierV2Lockup
    function isCancelable(uint256 streamId) external view override notNull(streamId) returns (bool result) {
        if (_statusOf(streamId) != Lockup.Status.SETTLED) {
            result = _streams[streamId].isCancelable;
        }
    }

    /// @inheritdoc ISablierV2Lockup
    function isCold(uint256 streamId) external view override notNull(streamId) returns (bool result) {
        Lockup.Status status = _statusOf(streamId);
        result = status == Lockup.Status.SETTLED || status == Lockup.Status.CANCELED || status == Lockup.Status.DEPLETED;
    }

    /// @inheritdoc ISablierV2Lockup
    function isDepleted(uint256 streamId) external view override notNull(streamId) returns (bool result) {
        result = _streams[streamId].isDepleted;
    }

    /// @inheritdoc ISablierV2Lockup
    function isStream(uint256 streamId) external view override returns (bool result) {
        result = _streams[streamId].isStream;
    }

    /// @inheritdoc ISablierV2Lockup
    function isTransferable(uint256 streamId) external view override notNull(streamId) returns (bool result) {
        result = _streams[streamId].isTransferable;
    }

    /// @inheritdoc ISablierV2Lockup
    function isWarm(uint256 streamId) external view override notNull(streamId) returns (bool result) {
        Lockup.Status status = _statusOf(streamId);
        result = status == Lockup.Status.PENDING || status == Lockup.Status.STREAMING;
    }

    /// @inheritdoc ISablierV2Lockup
    function refundableAmountOf(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (uint128 refundableAmount)
    {
        // These checks are needed because {_calculateStreamedAmount} does not look up the stream's status. Note that
        // checking for `isCancelable` also checks if the stream `wasCanceled` thanks to the protocol invariant that
        // canceled streams are not cancelable anymore.
        if (_streams[streamId].isCancelable && !_streams[streamId].isDepleted) {
            refundableAmount = _streams[streamId].amounts.deposited - _calculateStreamedAmount(streamId);
        }
        // Otherwise, the result is implicitly zero.
    }

    /// @inheritdoc ISablierV2Lockup
    function statusOf(uint256 streamId) external view override notNull(streamId) returns (Lockup.Status status) {
        status = _statusOf(streamId);
    }

    /// @inheritdoc ISablierV2Lockup
    function streamedAmountOf(uint256 streamId)
        public
        view
        override
        notNull(streamId)
        returns (uint128 streamedAmount)
    {
        streamedAmount = _streamedAmountOf(streamId);
    }

    /// @inheritdoc ERC721
    function supportsInterface(bytes4 interfaceId) public view override(IERC165, ERC721) returns (bool) {
        // 0x49064906 is the ERC-165 interface ID required by ERC-4906
        return interfaceId == 0x49064906 || super.supportsInterface(interfaceId);
    }

    /// @inheritdoc ERC721
    function tokenURI(uint256 streamId) public view override(IERC721Metadata, ERC721) returns (string memory uri) {
        // Check: the stream NFT exists.
        _requireOwned({ tokenId: streamId });

        // Generate the URI describing the stream NFT.
        uri = nftDescriptor.tokenURI({ sablier: this, streamId: streamId });
    }

    /// @inheritdoc ISablierV2Lockup
    function wasCanceled(uint256 streamId) external view override notNull(streamId) returns (bool result) {
        result = _streams[streamId].wasCanceled;
    }

    /// @inheritdoc ISablierV2Lockup
    function withdrawableAmountOf(uint256 streamId)
        external
        view
        override
        notNull(streamId)
        returns (uint128 withdrawableAmount)
    {
        withdrawableAmount = _withdrawableAmountOf(streamId);
    }

    /*//////////////////////////////////////////////////////////////////////////
                         USER-FACING NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc ISablierV2Lockup
    function allowToHook(address recipient) external override onlyAdmin {
        // Check: non-zero code size.
        if (recipient.code.length == 0) {
            revert Errors.SablierV2Lockup_AllowToHookZeroCodeSize(recipient);
        }

        // Check: recipients implements the ERC-165 interface ID required by {ISablierLockupRecipient}.
        bytes4 interfaceId = type(ISablierLockupRecipient).interfaceId;
        if (!ISablierLockupRecipient(recipient).supportsInterface(interfaceId)) {
            revert Errors.SablierV2Lockup_AllowToHookUnsupportedInterface(recipient);
        }

        // Effect: put the recipient on the allowlist.
        _allowedToHook[recipient] = true;

        // Log the allowlist addition.
        emit ISablierV2Lockup.AllowToHook({ admin: msg.sender, recipient: recipient });
    }

    /// @inheritdoc ISablierV2Lockup
    function burn(uint256 streamId) external override noDelegateCall notNull(streamId) {
        // Check: only depleted streams can be burned.
        if (!_streams[streamId].isDepleted) {
            revert Errors.SablierV2Lockup_StreamNotDepleted(streamId);
        }

        // Check:
        // 1. NFT exists (see {IERC721.getApproved}).
        // 2. `msg.sender` is either the owner of the NFT or an approved third party.
        if (!_isCallerStreamRecipientOrApproved(streamId)) {
            revert Errors.SablierV2Lockup_Unauthorized(streamId, msg.sender);
        }

        // Effect: burn the NFT.
        _burn({ tokenId: streamId });
    }

    /// @inheritdoc ISablierV2Lockup
    function cancel(uint256 streamId) public override noDelegateCall notNull(streamId) {
        // Check: the stream is neither depleted nor canceled.
        if (_streams[streamId].isDepleted) {
            revert Errors.SablierV2Lockup_StreamDepleted(streamId);
        } else if (_streams[streamId].wasCanceled) {
            revert Errors.SablierV2Lockup_StreamCanceled(streamId);
        }

        // Check: `msg.sender` is the stream's sender.
        if (!_isCallerStreamSender(streamId)) {
            revert Errors.SablierV2Lockup_Unauthorized(streamId, msg.sender);
        }

        // Checks, Effects and Interactions: cancel the stream.
        _cancel(streamId);
    }

    /// @inheritdoc ISablierV2Lockup
    function cancelMultiple(uint256[] calldata streamIds) external override noDelegateCall {
        // Iterate over the provided array of stream IDs and cancel each stream.
        uint256 count = streamIds.length;
        for (uint256 i = 0; i < count; ++i) {
            // Effects and Interactions: cancel the stream.
            cancel(streamIds[i]);
        }
    }

    /// @inheritdoc ISablierV2Lockup
    function renounce(uint256 streamId) external override noDelegateCall notNull(streamId) {
        // Check: the stream is not cold.
        Lockup.Status status = _statusOf(streamId);
        if (status == Lockup.Status.DEPLETED) {
            revert Errors.SablierV2Lockup_StreamDepleted(streamId);
        } else if (status == Lockup.Status.CANCELED) {
            revert Errors.SablierV2Lockup_StreamCanceled(streamId);
        } else if (status == Lockup.Status.SETTLED) {
            revert Errors.SablierV2Lockup_StreamSettled(streamId);
        }

        // Check: `msg.sender` is the stream's sender.
        if (!_isCallerStreamSender(streamId)) {
            revert Errors.SablierV2Lockup_Unauthorized(streamId, msg.sender);
        }

        // Checks and Effects: renounce the stream.
        _renounce(streamId);

        // Log the renouncement.
        emit ISablierV2Lockup.RenounceLockupStream(streamId);

        // Emit an ERC-4906 event to trigger an update of the NFT metadata.
        emit MetadataUpdate({ _tokenId: streamId });
    }

    /// @inheritdoc ISablierV2Lockup
    function setNFTDescriptor(ISablierV2NFTDescriptor newNFTDescriptor) external override onlyAdmin {
        // Effect: set the NFT descriptor.
        ISablierV2NFTDescriptor oldNftDescriptor = nftDescriptor;
        nftDescriptor = newNFTDescriptor;

        // Log the change of the NFT descriptor.
        emit ISablierV2Lockup.SetNFTDescriptor({
            admin: msg.sender,
            oldNFTDescriptor: oldNftDescriptor,
            newNFTDescriptor: newNFTDescriptor
        });

        // Refresh the NFT metadata for all streams.
        emit BatchMetadataUpdate({ _fromTokenId: 1, _toTokenId: nextStreamId - 1 });
    }

    /// @inheritdoc ISablierV2Lockup
    function withdraw(uint256 streamId, address to, uint128 amount) public override noDelegateCall notNull(streamId) {
        // Check: the stream is not depleted.
        if (_streams[streamId].isDepleted) {
            revert Errors.SablierV2Lockup_StreamDepleted(streamId);
        }

        // Check: the withdrawal address is not zero.
        if (to == address(0)) {
            revert Errors.SablierV2Lockup_WithdrawToZeroAddress(streamId);
        }

        // Check: the withdraw amount is not zero.
        if (amount == 0) {
            revert Errors.SablierV2Lockup_WithdrawAmountZero(streamId);
        }

        // Retrieve the recipient from storage.
        address recipient = _ownerOf(streamId);

        // Check: if `msg.sender` is neither the stream's recipient nor an approved third party, the withdrawal address
        // must be the recipient.
        if (to != recipient && !_isCallerStreamRecipientOrApproved(streamId)) {
            revert Errors.SablierV2Lockup_WithdrawalAddressNotRecipient(streamId, msg.sender, to);
        }

        // Check: the withdraw amount is not greater than the withdrawable amount.
        uint128 withdrawableAmount = _withdrawableAmountOf(streamId);
        if (amount > withdrawableAmount) {
            revert Errors.SablierV2Lockup_Overdraw(streamId, amount, withdrawableAmount);
        }

        // Effects and Interactions: make the withdrawal.
        _withdraw(streamId, to, amount);

        // Emit an ERC-4906 event to trigger an update of the NFT metadata.
        emit MetadataUpdate({ _tokenId: streamId });

        // Interaction: if `msg.sender` is not the recipient and the recipient is on the allowlist, run the hook.
        if (msg.sender != recipient && _allowedToHook[recipient]) {
            bytes4 selector = ISablierLockupRecipient(recipient).onSablierLockupWithdraw({
                streamId: streamId,
                caller: msg.sender,
                to: to,
                amount: amount
            });

            // Check: the recipient's hook returned the correct selector.
            if (selector != ISablierLockupRecipient.onSablierLockupWithdraw.selector) {
                revert Errors.SablierV2Lockup_InvalidHookSelector(recipient);
            }
        }
    }

    /// @inheritdoc ISablierV2Lockup
    function withdrawMax(uint256 streamId, address to) external override returns (uint128 withdrawnAmount) {
        withdrawnAmount = _withdrawableAmountOf(streamId);
        withdraw({ streamId: streamId, to: to, amount: withdrawnAmount });
    }

    /// @inheritdoc ISablierV2Lockup
    function withdrawMaxAndTransfer(
        uint256 streamId,
        address newRecipient
    )
        external
        override
        noDelegateCall
        notNull(streamId)
        returns (uint128 withdrawnAmount)
    {
        // Check: the caller is the current recipient. This also checks that the NFT was not burned.
        address currentRecipient = _ownerOf(streamId);
        if (msg.sender != currentRecipient) {
            revert Errors.SablierV2Lockup_Unauthorized(streamId, msg.sender);
        }

        // Skip the withdrawal if the withdrawable amount is zero.
        withdrawnAmount = _withdrawableAmountOf(streamId);
        if (withdrawnAmount > 0) {
            withdraw({ streamId: streamId, to: currentRecipient, amount: withdrawnAmount });
        }

        // Checks and Effects: transfer the NFT.
        _transfer({ from: currentRecipient, to: newRecipient, tokenId: streamId });
    }

    /// @inheritdoc ISablierV2Lockup
    function withdrawMultiple(
        uint256[] calldata streamIds,
        uint128[] calldata amounts
    )
        external
        override
        noDelegateCall
    {
        // Check: there is an equal number of `streamIds` and `amounts`.
        uint256 streamIdsCount = streamIds.length;
        uint256 amountsCount = amounts.length;
        if (streamIdsCount != amountsCount) {
            revert Errors.SablierV2Lockup_WithdrawArrayCountsNotEqual(streamIdsCount, amountsCount);
        }

        // Iterate over the provided array of stream IDs, and withdraw from each stream to the recipient.
        for (uint256 i = 0; i < streamIdsCount; ++i) {
            // Checks, Effects and Interactions: check the parameters and make the withdrawal.
            withdraw({ streamId: streamIds[i], to: _ownerOf(streamIds[i]), amount: amounts[i] });
        }
    }

    /*//////////////////////////////////////////////////////////////////////////
                             INTERNAL CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Calculates the streamed amount of the stream without looking up the stream's status.
    /// @dev This function is implemented by child contracts, so the logic varies depending on the model.
    function _calculateStreamedAmount(uint256 streamId) internal view virtual returns (uint128);

    /// @notice Checks whether `msg.sender` is the stream's recipient or an approved third party.
    /// @param streamId The stream ID for the query.
    function _isCallerStreamRecipientOrApproved(uint256 streamId) internal view returns (bool) {
        address recipient = _ownerOf(streamId);
        return msg.sender == recipient || isApprovedForAll({ owner: recipient, operator: msg.sender })
            || getApproved(streamId) == msg.sender;
    }

    /// @notice Checks whether `msg.sender` is the stream's sender.
    /// @param streamId The stream ID for the query.
    function _isCallerStreamSender(uint256 streamId) internal view returns (bool) {
        return msg.sender == _streams[streamId].sender;
    }

    /// @dev Retrieves the stream's status without performing a null check.
    function _statusOf(uint256 streamId) internal view returns (Lockup.Status) {
        if (_streams[streamId].isDepleted) {
            return Lockup.Status.DEPLETED;
        } else if (_streams[streamId].wasCanceled) {
            return Lockup.Status.CANCELED;
        }

        if (block.timestamp < _streams[streamId].startTime) {
            return Lockup.Status.PENDING;
        }

        if (_calculateStreamedAmount(streamId) < _streams[streamId].amounts.deposited) {
            return Lockup.Status.STREAMING;
        } else {
            return Lockup.Status.SETTLED;
        }
    }

    /// @dev See the documentation for the user-facing functions that call this internal function.
    function _streamedAmountOf(uint256 streamId) internal view returns (uint128) {
        Lockup.Amounts memory amounts = _streams[streamId].amounts;

        if (_streams[streamId].isDepleted) {
            return amounts.withdrawn;
        } else if (_streams[streamId].wasCanceled) {
            return amounts.deposited - amounts.refunded;
        }

        return _calculateStreamedAmount(streamId);
    }

    /// @dev See the documentation for the user-facing functions that call this internal function.
    function _withdrawableAmountOf(uint256 streamId) internal view returns (uint128) {
        return _streamedAmountOf(streamId) - _streams[streamId].amounts.withdrawn;
    }

    /*//////////////////////////////////////////////////////////////////////////
                           INTERNAL NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev See the documentation for the user-facing functions that call this internal function.
    function _cancel(uint256 streamId) internal {
        // Calculate the streamed amount.
        uint128 streamedAmount = _calculateStreamedAmount(streamId);

        // Retrieve the amounts from storage.
        Lockup.Amounts memory amounts = _streams[streamId].amounts;

        // Check: the stream is not settled.
        if (streamedAmount >= amounts.deposited) {
            revert Errors.SablierV2Lockup_StreamSettled(streamId);
        }

        // Check: the stream is cancelable.
        if (!_streams[streamId].isCancelable) {
            revert Errors.SablierV2Lockup_StreamNotCancelable(streamId);
        }

        // Calculate the sender's amount.
        uint128 senderAmount;
        unchecked {
            senderAmount = amounts.deposited - streamedAmount;
        }

        // Calculate the recipient's amount.
        uint128 recipientAmount = streamedAmount - amounts.withdrawn;

        // Effect: mark the stream as canceled.
        _streams[streamId].wasCanceled = true;

        // Effect: make the stream not cancelable anymore, because a stream can only be canceled once.
        _streams[streamId].isCancelable = false;

        // Effect: if there are no assets left for the recipient to withdraw, mark the stream as depleted.
        if (recipientAmount == 0) {
            _streams[streamId].isDepleted = true;
        }

        // Effect: set the refunded amount.
        _streams[streamId].amounts.refunded = senderAmount;

        // Retrieve the sender and the recipient from storage.
        address sender = _streams[streamId].sender;
        address recipient = _ownerOf(streamId);

        // Retrieve the ERC-20 asset from storage.
        IERC20 asset = _streams[streamId].asset;

        // Interaction: refund the sender.
        asset.safeTransfer({ to: sender, value: senderAmount });

        // Log the cancellation.
        emit ISablierV2Lockup.CancelLockupStream(streamId, sender, recipient, asset, senderAmount, recipientAmount);

        // Emit an ERC-4906 event to trigger an update of the NFT metadata.
        emit MetadataUpdate({ _tokenId: streamId });

        // Interaction: if the recipient is on the allowlist, run the hook.
        if (_allowedToHook[recipient]) {
            bytes4 selector = ISablierLockupRecipient(recipient).onSablierLockupCancel({
                streamId: streamId,
                sender: sender,
                senderAmount: senderAmount,
                recipientAmount: recipientAmount
            });

            // Check: the recipient's hook returned the correct selector.
            if (selector != ISablierLockupRecipient.onSablierLockupCancel.selector) {
                revert Errors.SablierV2Lockup_InvalidHookSelector(recipient);
            }
        }
    }

    /// @dev See the documentation for the user-facing functions that call this internal function.
    function _renounce(uint256 streamId) internal {
        // Check: the stream is cancelable.
        if (!_streams[streamId].isCancelable) {
            revert Errors.SablierV2Lockup_StreamNotCancelable(streamId);
        }

        // Effect: renounce the stream by making it not cancelable.
        _streams[streamId].isCancelable = false;
    }

    /// @notice Overrides the {ERC-721._update} function to check that the stream is transferable, and emits an
    /// ERC-4906 event.
    /// @dev There are two cases when the transferable flag is ignored:
    /// - If the current owner is 0, then the update is a mint and is allowed.
    /// - If `to` is 0, then the update is a burn and is also allowed.
    /// @param to The address of the new recipient of the stream.
    /// @param streamId ID of the stream to update.
    /// @param auth Optional parameter. If the value is not zero, the overridden implementation will check that
    /// `auth` is either the recipient of the stream, or an approved third party.
    /// @return The original recipient of the `streamId` before the update.
    function _update(address to, uint256 streamId, address auth) internal override returns (address) {
        address from = _ownerOf(streamId);

        if (from != address(0) && to != address(0) && !_streams[streamId].isTransferable) {
            revert Errors.SablierV2Lockup_NotTransferable(streamId);
        }

        // Emit an ERC-4906 event to trigger an update of the NFT metadata.
        emit MetadataUpdate({ _tokenId: streamId });

        return super._update(to, streamId, auth);
    }

    /// @dev See the documentation for the user-facing functions that call this internal function.
    function _withdraw(uint256 streamId, address to, uint128 amount) internal {
        // Effect: update the withdrawn amount.
        _streams[streamId].amounts.withdrawn = _streams[streamId].amounts.withdrawn + amount;

        // Retrieve the amounts from storage.
        Lockup.Amounts memory amounts = _streams[streamId].amounts;

        // Using ">=" instead of "==" for additional safety reasons. In the event of an unforeseen increase in the
        // withdrawn amount, the stream will still be marked as depleted.
        if (amounts.withdrawn >= amounts.deposited - amounts.refunded) {
            // Effect: mark the stream as depleted.
            _streams[streamId].isDepleted = true;

            // Effect: make the stream not cancelable anymore, because a depleted stream cannot be canceled.
            _streams[streamId].isCancelable = false;
        }

        // Retrieve the ERC-20 asset from storage.
        IERC20 asset = _streams[streamId].asset;

        // Interaction: perform the ERC-20 transfer.
        asset.safeTransfer({ to: to, value: amount });

        // Log the withdrawal.
        emit ISablierV2Lockup.WithdrawFromLockupStream(streamId, to, asset, amount);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import { Lockup, LockupLinear } from "../types/DataTypes.sol";
import { ISablierV2Lockup } from "./ISablierV2Lockup.sol";

/// @title ISablierV2LockupLinear
/// @notice Creates and manages Lockup streams with a linear distribution function.
interface ISablierV2LockupLinear is ISablierV2Lockup {
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when a stream is created.
    /// @param streamId The ID of the newly created stream.
    /// @param funder The address which funded the stream.
    /// @param sender The address distributing the assets, which will have the ability to cancel the stream.
    /// @param recipient The address receiving the assets.
    /// @param amounts Struct containing (i) the deposit amount, and (ii) the broker fee amount, both denoted
    /// in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Boolean indicating whether the stream will be cancelable or not.
    /// @param transferable Boolean indicating whether the stream NFT is transferable or not.
    /// @param timestamps Struct containing (i) the stream's start time, (ii) cliff time, and (iii) end time, all as
    /// Unix timestamps.
    /// @param broker The address of the broker who has helped create the stream, e.g. a front-end website.
    event CreateLockupLinearStream(
        uint256 streamId,
        address funder,
        address indexed sender,
        address indexed recipient,
        Lockup.CreateAmounts amounts,
        IERC20 indexed asset,
        bool cancelable,
        bool transferable,
        LockupLinear.Timestamps timestamps,
        address broker
    );

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Retrieves the stream's cliff time, which is a Unix timestamp.  A value of zero means there
    /// is no cliff.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getCliffTime(uint256 streamId) external view returns (uint40 cliffTime);

    /// @notice Retrieves the full stream details.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    /// @return stream See the documentation in {DataTypes}.
    function getStream(uint256 streamId) external view returns (LockupLinear.StreamLL memory stream);

    /// @notice Retrieves the stream's start, cliff and end timestamps.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    /// @return timestamps See the documentation in {DataTypes}.
    function getTimestamps(uint256 streamId) external view returns (LockupLinear.Timestamps memory timestamps);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Creates a stream by setting the start time to `block.timestamp`, and the end time to
    /// the sum of `block.timestamp` and `params.durations.total`. The stream is funded by `msg.sender` and is wrapped
    /// in an ERC-721 NFT.
    ///
    /// @dev Emits a {Transfer} and {CreateLockupLinearStream} event.
    ///
    /// Requirements:
    /// - All requirements in {createWithTimestamps} must be met for the calculated parameters.
    ///
    /// @param params Struct encapsulating the function parameters, which are documented in {DataTypes}.
    /// @return streamId The ID of the newly created stream.
    function createWithDurations(LockupLinear.CreateWithDurations calldata params)
        external
        returns (uint256 streamId);

    /// @notice Creates a stream with the provided start time and end time. The stream is funded by `msg.sender` and is
    /// wrapped in an ERC-721 NFT.
    ///
    /// @dev Emits a {Transfer} and {CreateLockupLinearStream} event.
    ///
    /// Notes:
    /// - A cliff time of zero means there is no cliff.
    /// - As long as the times are ordered, it is not an error for the start or the cliff time to be in the past.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `params.totalAmount` must be greater than zero.
    /// - If set, `params.broker.fee` must not be greater than `MAX_BROKER_FEE`.
    /// - `params.timestamps.start` must be greater than zero and less than `params.timestamps.end`.
    /// - If set, `params.timestamps.cliff` must be greater than `params.timestamps.start` and less than
    /// `params.timestamps.end`.
    /// - `params.timestamps.end` must be in the future.
    /// - `params.recipient` must not be the zero address.
    /// - `msg.sender` must have allowed this contract to spend at least `params.totalAmount` assets.
    ///
    /// @param params Struct encapsulating the function parameters, which are documented in {DataTypes}.
    /// @return streamId The ID of the newly created stream.
    function createWithTimestamps(LockupLinear.CreateWithTimestamps calldata params)
        external
        returns (uint256 streamId);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC721Metadata } from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";

/// @title ISablierV2NFTDescriptor
/// @notice This contract generates the URI describing the Sablier V2 stream NFTs.
/// @dev Inspired by Uniswap V3 Positions NFTs.
interface ISablierV2NFTDescriptor {
    /// @notice Produces the URI describing a particular stream NFT.
    /// @dev This is a data URI with the JSON contents directly inlined.
    /// @param sablier The address of the Sablier contract the stream was created in.
    /// @param streamId The ID of the stream for which to produce a description.
    /// @return uri The URI of the ERC721-compliant metadata.
    function tokenURI(IERC721Metadata sablier, uint256 streamId) external view returns (string memory uri);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.8.22;

import { UD60x18, ud } from "@prb/math/src/UD60x18.sol";

import { Lockup, LockupDynamic, LockupLinear, LockupTranched } from "../types/DataTypes.sol";
import { Errors } from "./Errors.sol";

/// @title Helpers
/// @notice Library with helper functions needed across the Sablier V2 contracts.
library Helpers {
    /*//////////////////////////////////////////////////////////////////////////
                             INTERNAL CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Calculate the timestamps and return the segments.
    function calculateSegmentTimestamps(LockupDynamic.SegmentWithDuration[] memory segments)
        internal
        view
        returns (LockupDynamic.Segment[] memory segmentsWithTimestamps)
    {
        uint256 segmentCount = segments.length;
        segmentsWithTimestamps = new LockupDynamic.Segment[](segmentCount);

        // Make the block timestamp the stream's start time.
        uint40 startTime = uint40(block.timestamp);

        // It is safe to use unchecked arithmetic because {SablierV2LockupDynamic-_create} will nonetheless check the
        // correctness of the calculated segment timestamps.
        unchecked {
            // The first segment is precomputed because it is needed in the for loop below.
            segmentsWithTimestamps[0] = LockupDynamic.Segment({
                amount: segments[0].amount,
                exponent: segments[0].exponent,
                timestamp: startTime + segments[0].duration
            });

            // Copy the segment amounts and exponents, and calculate the segment timestamps.
            for (uint256 i = 1; i < segmentCount; ++i) {
                segmentsWithTimestamps[i] = LockupDynamic.Segment({
                    amount: segments[i].amount,
                    exponent: segments[i].exponent,
                    timestamp: segmentsWithTimestamps[i - 1].timestamp + segments[i].duration
                });
            }
        }
    }

    /// @dev Calculate the timestamps and return the tranches.
    function calculateTrancheTimestamps(LockupTranched.TrancheWithDuration[] memory tranches)
        internal
        view
        returns (LockupTranched.Tranche[] memory tranchesWithTimestamps)
    {
        uint256 trancheCount = tranches.length;
        tranchesWithTimestamps = new LockupTranched.Tranche[](trancheCount);

        // Make the block timestamp the stream's start time.
        uint40 startTime = uint40(block.timestamp);

        // It is safe to use unchecked arithmetic because {SablierV2LockupTranched-_create} will nonetheless check the
        // correctness of the calculated tranche timestamps.
        unchecked {
            // The first tranche is precomputed because it is needed in the for loop below.
            tranchesWithTimestamps[0] =
                LockupTranched.Tranche({ amount: tranches[0].amount, timestamp: startTime + tranches[0].duration });

            // Copy the tranche amounts and calculate the tranche timestamps.
            for (uint256 i = 1; i < trancheCount; ++i) {
                tranchesWithTimestamps[i] = LockupTranched.Tranche({
                    amount: tranches[i].amount,
                    timestamp: tranchesWithTimestamps[i - 1].timestamp + tranches[i].duration
                });
            }
        }
    }

    /// @dev Checks the broker fee is not greater than `maxBrokerFee`, and then calculates the broker fee amount and the
    /// deposit amount from the total amount.
    function checkAndCalculateBrokerFee(
        uint128 totalAmount,
        UD60x18 brokerFee,
        UD60x18 maxBrokerFee
    )
        internal
        pure
        returns (Lockup.CreateAmounts memory amounts)
    {
        // When the total amount is zero, the broker fee is also zero.
        if (totalAmount == 0) {
            return Lockup.CreateAmounts(0, 0);
        }

        // Check: the broker fee is not greater than `maxBrokerFee`.
        if (brokerFee.gt(maxBrokerFee)) {
            revert Errors.SablierV2Lockup_BrokerFeeTooHigh(brokerFee, maxBrokerFee);
        }

        // Calculate the broker fee amount.
        // The cast to uint128 is safe because the maximum fee is hard coded.
        amounts.brokerFee = uint128(ud(totalAmount).mul(brokerFee).intoUint256());

        // Assert that the total amount is strictly greater than the broker fee amount.
        assert(totalAmount > amounts.brokerFee);

        // Calculate the deposit amount (the amount to stream, net of the broker fee).
        amounts.deposit = totalAmount - amounts.brokerFee;
    }

    /// @dev Checks the parameters of the {SablierV2LockupDynamic-_create} function.
    function checkCreateLockupDynamic(
        uint128 depositAmount,
        LockupDynamic.Segment[] memory segments,
        uint256 maxSegmentCount,
        uint40 startTime
    )
        internal
        view
    {
        // Check: the deposit amount is not zero.
        if (depositAmount == 0) {
            revert Errors.SablierV2Lockup_DepositAmountZero();
        }

        // Check: the start time is not zero.
        if (startTime == 0) {
            revert Errors.SablierV2Lockup_StartTimeZero();
        }

        // Check: the segment count is not zero.
        uint256 segmentCount = segments.length;
        if (segmentCount == 0) {
            revert Errors.SablierV2LockupDynamic_SegmentCountZero();
        }

        // Check: the segment count is not greater than the maximum allowed.
        if (segmentCount > maxSegmentCount) {
            revert Errors.SablierV2LockupDynamic_SegmentCountTooHigh(segmentCount);
        }

        // Check: requirements of segments.
        _checkSegments(segments, depositAmount, startTime);
    }

    /// @dev Checks the parameters of the {SablierV2LockupLinear-_create} function.
    function checkCreateLockupLinear(uint128 depositAmount, LockupLinear.Timestamps memory timestamps) internal view {
        // Check: the deposit amount is not zero.
        if (depositAmount == 0) {
            revert Errors.SablierV2Lockup_DepositAmountZero();
        }

        // Check: the start time is not zero.
        if (timestamps.start == 0) {
            revert Errors.SablierV2Lockup_StartTimeZero();
        }

        // Since a cliff time of zero means there is no cliff, the following checks are performed only if it's not zero.
        if (timestamps.cliff > 0) {
            // Check: the start time is strictly less than the cliff time.
            if (timestamps.start >= timestamps.cliff) {
                revert Errors.SablierV2LockupLinear_StartTimeNotLessThanCliffTime(timestamps.start, timestamps.cliff);
            }

            // Check: the cliff time is strictly less than the end time.
            if (timestamps.cliff >= timestamps.end) {
                revert Errors.SablierV2LockupLinear_CliffTimeNotLessThanEndTime(timestamps.cliff, timestamps.end);
            }
        }

        // Check: the start time is strictly less than the end time.
        if (timestamps.start >= timestamps.end) {
            revert Errors.SablierV2LockupLinear_StartTimeNotLessThanEndTime(timestamps.start, timestamps.end);
        }

        // Check: the end time is in the future.
        uint40 blockTimestamp = uint40(block.timestamp);
        if (blockTimestamp >= timestamps.end) {
            revert Errors.SablierV2Lockup_EndTimeNotInTheFuture(blockTimestamp, timestamps.end);
        }
    }

    /// @dev Checks the parameters of the {SablierV2LockupTranched-_create} function.
    function checkCreateLockupTranched(
        uint128 depositAmount,
        LockupTranched.Tranche[] memory tranches,
        uint256 maxTrancheCount,
        uint40 startTime
    )
        internal
        view
    {
        // Check: the deposit amount is not zero.
        if (depositAmount == 0) {
            revert Errors.SablierV2Lockup_DepositAmountZero();
        }

        // Check: the start time is not zero.
        if (startTime == 0) {
            revert Errors.SablierV2Lockup_StartTimeZero();
        }

        // Check: the tranche count is not zero.
        uint256 trancheCount = tranches.length;
        if (trancheCount == 0) {
            revert Errors.SablierV2LockupTranched_TrancheCountZero();
        }

        // Check: the tranche count is not greater than the maximum allowed.
        if (trancheCount > maxTrancheCount) {
            revert Errors.SablierV2LockupTranched_TrancheCountTooHigh(trancheCount);
        }

        // Check: requirements of tranches.
        _checkTranches(tranches, depositAmount, startTime);
    }

    /*//////////////////////////////////////////////////////////////////////////
                             PRIVATE CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @dev Checks that:
    ///
    /// 1. The first timestamp is strictly greater than the start time.
    /// 2. The timestamps are ordered chronologically.
    /// 3. There are no duplicate timestamps.
    /// 4. The deposit amount is equal to the sum of all segment amounts.
    function _checkSegments(
        LockupDynamic.Segment[] memory segments,
        uint128 depositAmount,
        uint40 startTime
    )
        private
        view
    {
        // Check: the start time is strictly less than the first segment timestamp.
        if (startTime >= segments[0].timestamp) {
            revert Errors.SablierV2LockupDynamic_StartTimeNotLessThanFirstSegmentTimestamp(
                startTime, segments[0].timestamp
            );
        }

        // Pre-declare the variables needed in the for loop.
        uint128 segmentAmountsSum;
        uint40 currentSegmentTimestamp;
        uint40 previousSegmentTimestamp;

        // Iterate over the segments to:
        //
        // 1. Calculate the sum of all segment amounts.
        // 2. Check that the timestamps are ordered.
        uint256 count = segments.length;
        for (uint256 index = 0; index < count; ++index) {
            // Add the current segment amount to the sum.
            segmentAmountsSum += segments[index].amount;

            // Check: the current timestamp is strictly greater than the previous timestamp.
            currentSegmentTimestamp = segments[index].timestamp;
            if (currentSegmentTimestamp <= previousSegmentTimestamp) {
                revert Errors.SablierV2LockupDynamic_SegmentTimestampsNotOrdered(
                    index, previousSegmentTimestamp, currentSegmentTimestamp
                );
            }

            // Make the current timestamp the previous timestamp of the next loop iteration.
            previousSegmentTimestamp = currentSegmentTimestamp;
        }

        // Check: the last timestamp is in the future.
        // When the loop exits, the current segment's timestamp is the last segment's timestamp, i.e. the stream's end
        // time. The variable is not renamed for gas efficiency purposes.
        uint40 blockTimestamp = uint40(block.timestamp);
        if (blockTimestamp >= currentSegmentTimestamp) {
            revert Errors.SablierV2Lockup_EndTimeNotInTheFuture(blockTimestamp, currentSegmentTimestamp);
        }

        // Check: the deposit amount is equal to the segment amounts sum.
        if (depositAmount != segmentAmountsSum) {
            revert Errors.SablierV2LockupDynamic_DepositAmountNotEqualToSegmentAmountsSum(
                depositAmount, segmentAmountsSum
            );
        }
    }

    /// @dev Checks that:
    ///
    /// 1. The first timestamp is strictly greater than the start time.
    /// 2. The timestamps are ordered chronologically.
    /// 3. There are no duplicate timestamps.
    /// 4. The deposit amount is equal to the sum of all tranche amounts.
    function _checkTranches(
        LockupTranched.Tranche[] memory tranches,
        uint128 depositAmount,
        uint40 startTime
    )
        private
        view
    {
        // Check: the start time is strictly less than the first tranche timestamp.
        if (startTime >= tranches[0].timestamp) {
            revert Errors.SablierV2LockupTranched_StartTimeNotLessThanFirstTrancheTimestamp(
                startTime, tranches[0].timestamp
            );
        }

        // Pre-declare the variables needed in the for loop.
        uint128 trancheAmountsSum;
        uint40 currentTrancheTimestamp;
        uint40 previousTrancheTimestamp;

        // Iterate over the tranches to:
        //
        // 1. Calculate the sum of all tranche amounts.
        // 2. Check that the timestamps are ordered.
        uint256 count = tranches.length;
        for (uint256 index = 0; index < count; ++index) {
            // Add the current tranche amount to the sum.
            trancheAmountsSum += tranches[index].amount;

            // Check: the current timestamp is strictly greater than the previous timestamp.
            currentTrancheTimestamp = tranches[index].timestamp;
            if (currentTrancheTimestamp <= previousTrancheTimestamp) {
                revert Errors.SablierV2LockupTranched_TrancheTimestampsNotOrdered(
                    index, previousTrancheTimestamp, currentTrancheTimestamp
                );
            }

            // Make the current timestamp the previous timestamp of the next loop iteration.
            previousTrancheTimestamp = currentTrancheTimestamp;
        }

        // Check: the last timestamp is in the future.
        // When the loop exits, the current tranche's timestamp is the last tranche's timestamp, i.e. the stream's end
        // time. The variable is not renamed for gas efficiency purposes.
        uint40 blockTimestamp = uint40(block.timestamp);
        if (blockTimestamp >= currentTrancheTimestamp) {
            revert Errors.SablierV2Lockup_EndTimeNotInTheFuture(blockTimestamp, currentTrancheTimestamp);
        }

        // Check: the deposit amount is equal to the tranche amounts sum.
        if (depositAmount != trancheAmountsSum) {
            revert Errors.SablierV2LockupTranched_DepositAmountNotEqualToTrancheAmountsSum(
                depositAmount, trancheAmountsSum
            );
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { UD2x18 } from "@prb/math/src/UD2x18.sol";
import { UD60x18 } from "@prb/math/src/UD60x18.sol";

// DataTypes.sol
//
// This file defines all structs used in V2 Core, most of which are organized under three namespaces:
//
// - Lockup
// - LockupDynamic
// - LockupLinear
// - LockupTranched
//
// You will notice that some structs contain "slot" annotations - they are used to indicate the
// storage layout of the struct. It is more gas efficient to group small data types together so
// that they fit in a single 32-byte slot.

/// @notice Struct encapsulating the broker parameters passed to the create functions. Both can be set to zero.
/// @param account The address receiving the broker's fee.
/// @param fee The broker's percentage fee from the total amount, denoted as a fixed-point number where 1e18 is 100%.
struct Broker {
    address account;
    UD60x18 fee;
}

/// @notice Namespace for the structs used in both {SablierV2LockupLinear} and {SablierV2LockupDynamic}.
library Lockup {
    /// @notice Struct encapsulating the deposit, withdrawn, and refunded amounts, both denoted in units of the asset's
    /// decimals.
    /// @dev Because the deposited and the withdrawn amount are often read together, declaring them in the same slot
    /// saves gas.
    /// @param deposited The initial amount deposited in the stream, net of broker fee.
    /// @param withdrawn The cumulative amount withdrawn from the stream.
    /// @param refunded The amount refunded to the sender. Unless the stream was canceled, this is always zero.
    struct Amounts {
        // slot 0
        uint128 deposited;
        uint128 withdrawn;
        // slot 1
        uint128 refunded;
    }

    /// @notice Struct encapsulating the deposit amount and the broker fee amount, both denoted in units of the asset's
    /// decimals.
    /// @param deposit The amount to deposit in the stream.
    /// @param brokerFee The broker fee amount.
    struct CreateAmounts {
        uint128 deposit;
        uint128 brokerFee;
    }

    /// @notice Enum representing the different statuses of a stream.
    /// @custom:value0 PENDING Stream created but not started; assets are in a pending state.
    /// @custom:value1 STREAMING Active stream where assets are currently being streamed.
    /// @custom:value2 SETTLED All assets have been streamed; recipient is due to withdraw them.
    /// @custom:value3 CANCELED Canceled stream; remaining assets await recipient's withdrawal.
    /// @custom:value4 DEPLETED Depleted stream; all assets have been withdrawn and/or refunded.
    enum Status {
        PENDING,
        STREAMING,
        SETTLED,
        CANCELED,
        DEPLETED
    }

    /// @notice A common data structure to be stored in all {SablierV2Lockup} models.
    /// @dev The fields are arranged like this to save gas via tight variable packing.
    /// @param sender The address distributing the assets, with the ability to cancel the stream.
    /// @param startTime The Unix timestamp indicating the stream's start.
    /// @param endTime The Unix timestamp indicating the stream's end.
    /// @param isCancelable Boolean indicating if the stream is cancelable.
    /// @param wasCanceled Boolean indicating if the stream was canceled.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param isDepleted Boolean indicating if the stream is depleted.
    /// @param isStream Boolean indicating if the struct entity exists.
    /// @param isTransferable Boolean indicating if the stream NFT is transferable.
    /// @param amounts Struct containing the deposit, withdrawn, and refunded amounts, both denoted in units of the
    /// asset's decimals.
    struct Stream {
        // slot 0
        address sender;
        uint40 startTime;
        uint40 endTime;
        bool isCancelable;
        bool wasCanceled;
        // slot 1
        IERC20 asset;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        // slot 2 and 3
        Lockup.Amounts amounts;
    }
}

/// @notice Namespace for the structs used in {SablierV2LockupDynamic}.
library LockupDynamic {
    /// @notice Struct encapsulating the parameters of the {SablierV2LockupDynamic.createWithDurations} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param segments Segments with durations used to compose the dynamic distribution function. Timestamps are
    /// calculated by starting from `block.timestamp` and adding each duration to the previous timestamp.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithDurations {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        SegmentWithDuration[] segments;
        Broker broker;
    }

    /// @notice Struct encapsulating the parameters of the {SablierV2LockupDynamic.createWithTimestamps} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param startTime The Unix timestamp indicating the stream's start.
    /// @param segments Segments used to compose the dynamic distribution function.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithTimestamps {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        uint40 startTime;
        Segment[] segments;
        Broker broker;
    }

    /// @notice Segment struct used in the Lockup Dynamic stream.
    /// @param amount The amount of assets to be streamed in the segment, denoted in units of the asset's decimals.
    /// @param exponent The exponent of the segment, denoted as a fixed-point number.
    /// @param timestamp The Unix timestamp indicating the segment's end.
    struct Segment {
        // slot 0
        uint128 amount;
        UD2x18 exponent;
        uint40 timestamp;
    }

    /// @notice Segment struct used at runtime in {SablierV2LockupDynamic.createWithDurations}.
    /// @param amount The amount of assets to be streamed in the segment, denoted in units of the asset's decimals.
    /// @param exponent The exponent of the segment, denoted as a fixed-point number.
    /// @param duration The time difference in seconds between the segment and the previous one.
    struct SegmentWithDuration {
        uint128 amount;
        UD2x18 exponent;
        uint40 duration;
    }

    /// @notice Struct encapsulating the full details of a stream.
    /// @dev Extends `Lockup.Stream` by including the recipient and the segments.
    struct StreamLD {
        address sender;
        address recipient;
        uint40 startTime;
        uint40 endTime;
        bool isCancelable;
        bool wasCanceled;
        IERC20 asset;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        Lockup.Amounts amounts;
        Segment[] segments;
    }

    /// @notice Struct encapsulating the LockupDynamic timestamps.
    /// @param start The Unix timestamp indicating the stream's start.
    /// @param end The Unix timestamp indicating the stream's end.
    struct Timestamps {
        uint40 start;
        uint40 end;
    }
}

/// @notice Namespace for the structs used in {SablierV2LockupLinear}.
library LockupLinear {
    /// @notice Struct encapsulating the parameters of the {SablierV2LockupLinear.createWithDurations} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param durations Struct containing (i) cliff period duration and (ii) total stream duration, both in seconds.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithDurations {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        Durations durations;
        Broker broker;
    }

    /// @notice Struct encapsulating the parameters of the {SablierV2LockupLinear.createWithTimestamps} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param timestamps Struct containing (i) the stream's start time, (ii) cliff time, and (iii) end time, all as
    /// Unix timestamps.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithTimestamps {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        Timestamps timestamps;
        Broker broker;
    }

    /// @notice Struct encapsulating the cliff duration and the total duration.
    /// @param cliff The cliff duration in seconds.
    /// @param total The total duration in seconds.
    struct Durations {
        uint40 cliff;
        uint40 total;
    }

    /// @notice Struct encapsulating the full details of a stream.
    /// @dev Extends `Lockup.Stream` by including the recipient and the cliff time.
    struct StreamLL {
        address sender;
        address recipient;
        uint40 startTime;
        bool isCancelable;
        bool wasCanceled;
        IERC20 asset;
        uint40 endTime;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        Lockup.Amounts amounts;
        uint40 cliffTime;
    }

    /// @notice Struct encapsulating the LockupLinear timestamps.
    /// @param start The Unix timestamp for the stream's start.
    /// @param cliff The Unix timestamp for the cliff period's end. A value of zero means there is no cliff.
    /// @param end The Unix timestamp for the stream's end.
    struct Timestamps {
        uint40 start;
        uint40 cliff;
        uint40 end;
    }
}

/// @notice Namespace for the structs used in {SablierV2LockupTranched}.
library LockupTranched {
    /// @notice Struct encapsulating the parameters of the {SablierV2LockupTranched.createWithDurations} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param tranches Tranches with durations used to compose the tranched distribution function. Timestamps are
    /// calculated by starting from `block.timestamp` and adding each duration to the previous timestamp.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithDurations {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        TrancheWithDuration[] tranches;
        Broker broker;
    }

    /// @notice Struct encapsulating the parameters of the {SablierV2LockupTranched.createWithTimestamps} function.
    /// @param sender The address distributing the assets, with the ability to cancel the stream. It doesn't have to be
    /// the same as `msg.sender`.
    /// @param recipient The address receiving the assets.
    /// @param totalAmount The total amount of ERC-20 assets to be distributed, including the stream deposit and any
    /// broker fee, both denoted in units of the asset's decimals.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param cancelable Indicates if the stream is cancelable.
    /// @param transferable Indicates if the stream NFT is transferable.
    /// @param startTime The Unix timestamp indicating the stream's start.
    /// @param tranches Tranches used to compose the tranched distribution function.
    /// @param broker Struct containing (i) the address of the broker assisting in creating the stream, and (ii) the
    /// percentage fee paid to the broker from `totalAmount`, denoted as a fixed-point number. Both can be set to zero.
    struct CreateWithTimestamps {
        address sender;
        address recipient;
        uint128 totalAmount;
        IERC20 asset;
        bool cancelable;
        bool transferable;
        uint40 startTime;
        Tranche[] tranches;
        Broker broker;
    }

    /// @notice Struct encapsulating the full details of a stream.
    /// @dev Extends `Lockup.Stream` by including the recipient and the tranches.
    struct StreamLT {
        address sender;
        address recipient;
        uint40 startTime;
        uint40 endTime;
        bool isCancelable;
        bool wasCanceled;
        IERC20 asset;
        bool isDepleted;
        bool isStream;
        bool isTransferable;
        Lockup.Amounts amounts;
        Tranche[] tranches;
    }

    /// @notice Struct encapsulating the LockupTranched timestamps.
    /// @param start The Unix timestamp indicating the stream's start.
    /// @param end The Unix timestamp indicating the stream's end.
    struct Timestamps {
        uint40 start;
        uint40 end;
    }

    /// @notice Tranche struct used in the Lockup Tranched stream.
    /// @param amount The amount of assets to be unlocked in the tranche, denoted in units of the asset's decimals.
    /// @param timestamp The Unix timestamp indicating the tranche's end.
    struct Tranche {
        // slot 0
        uint128 amount;
        uint40 timestamp;
    }

    /// @notice Tranche struct used at runtime in {SablierV2LockupTranched.createWithDurations}.
    /// @param amount The amount of assets to be unlocked in the tranche, denoted in units of the asset's decimals.
    /// @param duration The time difference in seconds between the tranche and the previous one.
    struct TrancheWithDuration {
        uint128 amount;
        uint40 duration;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Errors.sol" as CastingErrors;
import { MAX_UINT128, MAX_UINT40 } from "../Common.sol";
import { uMAX_SD1x18 } from "../sd1x18/Constants.sol";
import { SD1x18 } from "../sd1x18/ValueType.sol";
import { uMAX_SD59x18 } from "../sd59x18/Constants.sol";
import { SD59x18 } from "../sd59x18/ValueType.sol";
import { uMAX_UD2x18 } from "../ud2x18/Constants.sol";
import { UD2x18 } from "../ud2x18/ValueType.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Casts a UD60x18 number into SD1x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD1x18`.
function intoSD1x18(UD60x18 x) pure returns (SD1x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uint256(int256(uMAX_SD1x18))) {
        revert CastingErrors.PRBMath_UD60x18_IntoSD1x18_Overflow(x);
    }
    result = SD1x18.wrap(int64(uint64(xUint)));
}

/// @notice Casts a UD60x18 number into UD2x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_UD2x18`.
function intoUD2x18(UD60x18 x) pure returns (UD2x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uMAX_UD2x18) {
        revert CastingErrors.PRBMath_UD60x18_IntoUD2x18_Overflow(x);
    }
    result = UD2x18.wrap(uint64(xUint));
}

/// @notice Casts a UD60x18 number into SD59x18.
/// @dev Requirements:
/// - x must be less than or equal to `uMAX_SD59x18`.
function intoSD59x18(UD60x18 x) pure returns (SD59x18 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > uint256(uMAX_SD59x18)) {
        revert CastingErrors.PRBMath_UD60x18_IntoSD59x18_Overflow(x);
    }
    result = SD59x18.wrap(int256(xUint));
}

/// @notice Casts a UD60x18 number into uint128.
/// @dev This is basically an alias for {unwrap}.
function intoUint256(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x);
}

/// @notice Casts a UD60x18 number into uint128.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT128`.
function intoUint128(UD60x18 x) pure returns (uint128 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > MAX_UINT128) {
        revert CastingErrors.PRBMath_UD60x18_IntoUint128_Overflow(x);
    }
    result = uint128(xUint);
}

/// @notice Casts a UD60x18 number into uint40.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(UD60x18 x) pure returns (uint40 result) {
    uint256 xUint = UD60x18.unwrap(x);
    if (xUint > MAX_UINT40) {
        revert CastingErrors.PRBMath_UD60x18_IntoUint40_Overflow(x);
    }
    result = uint40(xUint);
}

/// @notice Alias for {wrap}.
function ud(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

/// @notice Alias for {wrap}.
function ud60x18(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

/// @notice Unwraps a UD60x18 number into uint256.
function unwrap(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x);
}

/// @notice Wraps a uint256 number into the UD60x18 value type.
function wrap(uint256 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(x);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { UD60x18 } from "./ValueType.sol";

// NOTICE: the "u" prefix stands for "unwrapped".

/// @dev Euler's number as a UD60x18 number.
UD60x18 constant E = UD60x18.wrap(2_718281828459045235);

/// @dev The maximum input permitted in {exp}.
uint256 constant uEXP_MAX_INPUT = 133_084258667509499440;
UD60x18 constant EXP_MAX_INPUT = UD60x18.wrap(uEXP_MAX_INPUT);

/// @dev The maximum input permitted in {exp2}.
uint256 constant uEXP2_MAX_INPUT = 192e18 - 1;
UD60x18 constant EXP2_MAX_INPUT = UD60x18.wrap(uEXP2_MAX_INPUT);

/// @dev Half the UNIT number.
uint256 constant uHALF_UNIT = 0.5e18;
UD60x18 constant HALF_UNIT = UD60x18.wrap(uHALF_UNIT);

/// @dev $log_2(10)$ as a UD60x18 number.
uint256 constant uLOG2_10 = 3_321928094887362347;
UD60x18 constant LOG2_10 = UD60x18.wrap(uLOG2_10);

/// @dev $log_2(e)$ as a UD60x18 number.
uint256 constant uLOG2_E = 1_442695040888963407;
UD60x18 constant LOG2_E = UD60x18.wrap(uLOG2_E);

/// @dev The maximum value a UD60x18 number can have.
uint256 constant uMAX_UD60x18 = 115792089237316195423570985008687907853269984665640564039457_584007913129639935;
UD60x18 constant MAX_UD60x18 = UD60x18.wrap(uMAX_UD60x18);

/// @dev The maximum whole value a UD60x18 number can have.
uint256 constant uMAX_WHOLE_UD60x18 = 115792089237316195423570985008687907853269984665640564039457_000000000000000000;
UD60x18 constant MAX_WHOLE_UD60x18 = UD60x18.wrap(uMAX_WHOLE_UD60x18);

/// @dev PI as a UD60x18 number.
UD60x18 constant PI = UD60x18.wrap(3_141592653589793238);

/// @dev The unit number, which gives the decimal precision of UD60x18.
uint256 constant uUNIT = 1e18;
UD60x18 constant UNIT = UD60x18.wrap(uUNIT);

/// @dev The unit number squared.
uint256 constant uUNIT_SQUARED = 1e36;
UD60x18 constant UNIT_SQUARED = UD60x18.wrap(uUNIT_SQUARED);

/// @dev Zero as a UD60x18 number.
UD60x18 constant ZERO = UD60x18.wrap(0);

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { uMAX_UD60x18, uUNIT } from "./Constants.sol";
import { PRBMath_UD60x18_Convert_Overflow } from "./Errors.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Converts a UD60x18 number to a simple integer by dividing it by `UNIT`.
/// @dev The result is rounded toward zero.
/// @param x The UD60x18 number to convert.
/// @return result The same number in basic integer form.
function convert(UD60x18 x) pure returns (uint256 result) {
    result = UD60x18.unwrap(x) / uUNIT;
}

/// @notice Converts a simple integer to UD60x18 by multiplying it by `UNIT`.
///
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UD60x18 / UNIT`.
///
/// @param x The basic integer to convert.
/// @param result The same number converted to UD60x18.
function convert(uint256 x) pure returns (UD60x18 result) {
    if (x > uMAX_UD60x18 / uUNIT) {
        revert PRBMath_UD60x18_Convert_Overflow(x);
    }
    unchecked {
        result = UD60x18.wrap(x * uUNIT);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { UD60x18 } from "./ValueType.sol";

/// @notice Thrown when ceiling a number overflows UD60x18.
error PRBMath_UD60x18_Ceil_Overflow(UD60x18 x);

/// @notice Thrown when converting a basic integer to the fixed-point format overflows UD60x18.
error PRBMath_UD60x18_Convert_Overflow(uint256 x);

/// @notice Thrown when taking the natural exponent of a base greater than 133_084258667509499441.
error PRBMath_UD60x18_Exp_InputTooBig(UD60x18 x);

/// @notice Thrown when taking the binary exponent of a base greater than 192e18.
error PRBMath_UD60x18_Exp2_InputTooBig(UD60x18 x);

/// @notice Thrown when taking the geometric mean of two numbers and multiplying them overflows UD60x18.
error PRBMath_UD60x18_Gm_Overflow(UD60x18 x, UD60x18 y);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in SD1x18.
error PRBMath_UD60x18_IntoSD1x18_Overflow(UD60x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in SD59x18.
error PRBMath_UD60x18_IntoSD59x18_Overflow(UD60x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in UD2x18.
error PRBMath_UD60x18_IntoUD2x18_Overflow(UD60x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint128.
error PRBMath_UD60x18_IntoUint128_Overflow(UD60x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint40.
error PRBMath_UD60x18_IntoUint40_Overflow(UD60x18 x);

/// @notice Thrown when taking the logarithm of a number less than 1.
error PRBMath_UD60x18_Log_InputTooSmall(UD60x18 x);

/// @notice Thrown when calculating the square root overflows UD60x18.
error PRBMath_UD60x18_Sqrt_Overflow(UD60x18 x);

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { wrap } from "./Casting.sol";
import { UD60x18 } from "./ValueType.sol";

/// @notice Implements the checked addition operation (+) in the UD60x18 type.
function add(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() + y.unwrap());
}

/// @notice Implements the AND (&) bitwise operation in the UD60x18 type.
function and(UD60x18 x, uint256 bits) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() & bits);
}

/// @notice Implements the AND (&) bitwise operation in the UD60x18 type.
function and2(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() & y.unwrap());
}

/// @notice Implements the equal operation (==) in the UD60x18 type.
function eq(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() == y.unwrap();
}

/// @notice Implements the greater than operation (>) in the UD60x18 type.
function gt(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() > y.unwrap();
}

/// @notice Implements the greater than or equal to operation (>=) in the UD60x18 type.
function gte(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() >= y.unwrap();
}

/// @notice Implements a zero comparison check function in the UD60x18 type.
function isZero(UD60x18 x) pure returns (bool result) {
    // This wouldn't work if x could be negative.
    result = x.unwrap() == 0;
}

/// @notice Implements the left shift operation (<<) in the UD60x18 type.
function lshift(UD60x18 x, uint256 bits) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() << bits);
}

/// @notice Implements the lower than operation (<) in the UD60x18 type.
function lt(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() < y.unwrap();
}

/// @notice Implements the lower than or equal to operation (<=) in the UD60x18 type.
function lte(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() <= y.unwrap();
}

/// @notice Implements the checked modulo operation (%) in the UD60x18 type.
function mod(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() % y.unwrap());
}

/// @notice Implements the not equal operation (!=) in the UD60x18 type.
function neq(UD60x18 x, UD60x18 y) pure returns (bool result) {
    result = x.unwrap() != y.unwrap();
}

/// @notice Implements the NOT (~) bitwise operation in the UD60x18 type.
function not(UD60x18 x) pure returns (UD60x18 result) {
    result = wrap(~x.unwrap());
}

/// @notice Implements the OR (|) bitwise operation in the UD60x18 type.
function or(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() | y.unwrap());
}

/// @notice Implements the right shift operation (>>) in the UD60x18 type.
function rshift(UD60x18 x, uint256 bits) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() >> bits);
}

/// @notice Implements the checked subtraction operation (-) in the UD60x18 type.
function sub(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() - y.unwrap());
}

/// @notice Implements the unchecked addition operation (+) in the UD60x18 type.
function uncheckedAdd(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(x.unwrap() + y.unwrap());
    }
}

/// @notice Implements the unchecked subtraction operation (-) in the UD60x18 type.
function uncheckedSub(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(x.unwrap() - y.unwrap());
    }
}

/// @notice Implements the XOR (^) bitwise operation in the UD60x18 type.
function xor(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(x.unwrap() ^ y.unwrap());
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "../Common.sol" as Common;
import "./Errors.sol" as Errors;
import { wrap } from "./Casting.sol";
import {
    uEXP_MAX_INPUT,
    uEXP2_MAX_INPUT,
    uHALF_UNIT,
    uLOG2_10,
    uLOG2_E,
    uMAX_UD60x18,
    uMAX_WHOLE_UD60x18,
    UNIT,
    uUNIT,
    uUNIT_SQUARED,
    ZERO
} from "./Constants.sol";
import { UD60x18 } from "./ValueType.sol";

/*//////////////////////////////////////////////////////////////////////////
                            MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Calculates the arithmetic average of x and y using the following formula:
///
/// $$
/// avg(x, y) = (x & y) + ((xUint ^ yUint) / 2)
/// $$
///
/// In English, this is what this formula does:
///
/// 1. AND x and y.
/// 2. Calculate half of XOR x and y.
/// 3. Add the two results together.
///
/// This technique is known as SWAR, which stands for "SIMD within a register". You can read more about it here:
/// https://devblogs.microsoft.com/oldnewthing/20220207-00/?p=106223
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The arithmetic average as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function avg(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();
    unchecked {
        result = wrap((xUint & yUint) + ((xUint ^ yUint) >> 1));
    }
}

/// @notice Yields the smallest whole number greater than or equal to x.
///
/// @dev This is optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional
/// counterparts. See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be less than or equal to `MAX_WHOLE_UD60x18`.
///
/// @param x The UD60x18 number to ceil.
/// @param result The smallest whole number greater than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ceil(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    if (xUint > uMAX_WHOLE_UD60x18) {
        revert Errors.PRBMath_UD60x18_Ceil_Overflow(x);
    }

    assembly ("memory-safe") {
        // Equivalent to `x % UNIT`.
        let remainder := mod(x, uUNIT)

        // Equivalent to `UNIT - remainder`.
        let delta := sub(uUNIT, remainder)

        // Equivalent to `x + remainder > 0 ? delta : 0`.
        result := add(x, mul(delta, gt(remainder, 0)))
    }
}

/// @notice Divides two UD60x18 numbers, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @param x The numerator as a UD60x18 number.
/// @param y The denominator as a UD60x18 number.
/// @param result The quotient as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function div(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(Common.mulDiv(x.unwrap(), uUNIT, y.unwrap()));
}

/// @notice Calculates the natural exponent of x using the following formula:
///
/// $$
/// e^x = 2^{x * log_2{e}}
/// $$
///
/// @dev Requirements:
/// - x must be less than 133_084258667509499441.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    // This check prevents values greater than 192e18 from being passed to {exp2}.
    if (xUint > uEXP_MAX_INPUT) {
        revert Errors.PRBMath_UD60x18_Exp_InputTooBig(x);
    }

    unchecked {
        // Inline the fixed-point multiplication to save gas.
        uint256 doubleUnitProduct = xUint * uLOG2_E;
        result = exp2(wrap(doubleUnitProduct / uUNIT));
    }
}

/// @notice Calculates the binary exponent of x using the binary fraction method.
///
/// @dev See https://ethereum.stackexchange.com/q/79903/24693
///
/// Requirements:
/// - x must be less than 192e18.
/// - The result must fit in UD60x18.
///
/// @param x The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp2(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    // Numbers greater than or equal to 192e18 don't fit in the 192.64-bit format.
    if (xUint > uEXP2_MAX_INPUT) {
        revert Errors.PRBMath_UD60x18_Exp2_InputTooBig(x);
    }

    // Convert x to the 192.64-bit fixed-point format.
    uint256 x_192x64 = (xUint << 64) / uUNIT;

    // Pass x to the {Common.exp2} function, which uses the 192.64-bit fixed-point number representation.
    result = wrap(Common.exp2(x_192x64));
}

/// @notice Yields the greatest whole number less than or equal to x.
/// @dev Optimized for fractional value inputs, because every whole value has (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
/// @param x The UD60x18 number to floor.
/// @param result The greatest whole number less than or equal to x, as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function floor(UD60x18 x) pure returns (UD60x18 result) {
    assembly ("memory-safe") {
        // Equivalent to `x % UNIT`.
        let remainder := mod(x, uUNIT)

        // Equivalent to `x - remainder > 0 ? remainder : 0)`.
        result := sub(x, mul(remainder, gt(remainder, 0)))
    }
}

/// @notice Yields the excess beyond the floor of x using the odd function definition.
/// @dev See https://en.wikipedia.org/wiki/Fractional_part.
/// @param x The UD60x18 number to get the fractional part of.
/// @param result The fractional part of x as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function frac(UD60x18 x) pure returns (UD60x18 result) {
    assembly ("memory-safe") {
        result := mod(x, uUNIT)
    }
}

/// @notice Calculates the geometric mean of x and y, i.e. $\sqrt{x * y}$, rounding down.
///
/// @dev Requirements:
/// - x * y must fit in UD60x18.
///
/// @param x The first operand as a UD60x18 number.
/// @param y The second operand as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function gm(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();
    if (xUint == 0 || yUint == 0) {
        return ZERO;
    }

    unchecked {
        // Checking for overflow this way is faster than letting Solidity do it.
        uint256 xyUint = xUint * yUint;
        if (xyUint / xUint != yUint) {
            revert Errors.PRBMath_UD60x18_Gm_Overflow(x, y);
        }

        // We don't need to multiply the result by `UNIT` here because the x*y product picked up a factor of `UNIT`
        // during multiplication. See the comments in {Common.sqrt}.
        result = wrap(Common.sqrt(xyUint));
    }
}

/// @notice Calculates the inverse of x.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must not be zero.
///
/// @param x The UD60x18 number for which to calculate the inverse.
/// @return result The inverse as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function inv(UD60x18 x) pure returns (UD60x18 result) {
    unchecked {
        result = wrap(uUNIT_SQUARED / x.unwrap());
    }
}

/// @notice Calculates the natural logarithm of x using the following formula:
///
/// $$
/// ln{x} = log_2{x} / log_2{e}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
/// - The precision isn't sufficiently fine-grained to return exactly `UNIT` when the input is `E`.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the natural logarithm.
/// @return result The natural logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function ln(UD60x18 x) pure returns (UD60x18 result) {
    unchecked {
        // Inline the fixed-point multiplication to save gas. This is overflow-safe because the maximum value that
        // {log2} can return is ~196_205294292027477728.
        result = wrap(log2(x).unwrap() * uUNIT / uLOG2_E);
    }
}

/// @notice Calculates the common logarithm of x using the following formula:
///
/// $$
/// log_{10}{x} = log_2{x} / log_2{10}
/// $$
///
/// However, if x is an exact power of ten, a hard coded value is returned.
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The UD60x18 number for which to calculate the common logarithm.
/// @return result The common logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log10(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    if (xUint < uUNIT) {
        revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
    }

    // Note that the `mul` in this assembly block is the standard multiplication operation, not {UD60x18.mul}.
    // prettier-ignore
    assembly ("memory-safe") {
        switch x
        case 1 { result := mul(uUNIT, sub(0, 18)) }
        case 10 { result := mul(uUNIT, sub(1, 18)) }
        case 100 { result := mul(uUNIT, sub(2, 18)) }
        case 1000 { result := mul(uUNIT, sub(3, 18)) }
        case 10000 { result := mul(uUNIT, sub(4, 18)) }
        case 100000 { result := mul(uUNIT, sub(5, 18)) }
        case 1000000 { result := mul(uUNIT, sub(6, 18)) }
        case 10000000 { result := mul(uUNIT, sub(7, 18)) }
        case 100000000 { result := mul(uUNIT, sub(8, 18)) }
        case 1000000000 { result := mul(uUNIT, sub(9, 18)) }
        case 10000000000 { result := mul(uUNIT, sub(10, 18)) }
        case 100000000000 { result := mul(uUNIT, sub(11, 18)) }
        case 1000000000000 { result := mul(uUNIT, sub(12, 18)) }
        case 10000000000000 { result := mul(uUNIT, sub(13, 18)) }
        case 100000000000000 { result := mul(uUNIT, sub(14, 18)) }
        case 1000000000000000 { result := mul(uUNIT, sub(15, 18)) }
        case 10000000000000000 { result := mul(uUNIT, sub(16, 18)) }
        case 100000000000000000 { result := mul(uUNIT, sub(17, 18)) }
        case 1000000000000000000 { result := 0 }
        case 10000000000000000000 { result := uUNIT }
        case 100000000000000000000 { result := mul(uUNIT, 2) }
        case 1000000000000000000000 { result := mul(uUNIT, 3) }
        case 10000000000000000000000 { result := mul(uUNIT, 4) }
        case 100000000000000000000000 { result := mul(uUNIT, 5) }
        case 1000000000000000000000000 { result := mul(uUNIT, 6) }
        case 10000000000000000000000000 { result := mul(uUNIT, 7) }
        case 100000000000000000000000000 { result := mul(uUNIT, 8) }
        case 1000000000000000000000000000 { result := mul(uUNIT, 9) }
        case 10000000000000000000000000000 { result := mul(uUNIT, 10) }
        case 100000000000000000000000000000 { result := mul(uUNIT, 11) }
        case 1000000000000000000000000000000 { result := mul(uUNIT, 12) }
        case 10000000000000000000000000000000 { result := mul(uUNIT, 13) }
        case 100000000000000000000000000000000 { result := mul(uUNIT, 14) }
        case 1000000000000000000000000000000000 { result := mul(uUNIT, 15) }
        case 10000000000000000000000000000000000 { result := mul(uUNIT, 16) }
        case 100000000000000000000000000000000000 { result := mul(uUNIT, 17) }
        case 1000000000000000000000000000000000000 { result := mul(uUNIT, 18) }
        case 10000000000000000000000000000000000000 { result := mul(uUNIT, 19) }
        case 100000000000000000000000000000000000000 { result := mul(uUNIT, 20) }
        case 1000000000000000000000000000000000000000 { result := mul(uUNIT, 21) }
        case 10000000000000000000000000000000000000000 { result := mul(uUNIT, 22) }
        case 100000000000000000000000000000000000000000 { result := mul(uUNIT, 23) }
        case 1000000000000000000000000000000000000000000 { result := mul(uUNIT, 24) }
        case 10000000000000000000000000000000000000000000 { result := mul(uUNIT, 25) }
        case 100000000000000000000000000000000000000000000 { result := mul(uUNIT, 26) }
        case 1000000000000000000000000000000000000000000000 { result := mul(uUNIT, 27) }
        case 10000000000000000000000000000000000000000000000 { result := mul(uUNIT, 28) }
        case 100000000000000000000000000000000000000000000000 { result := mul(uUNIT, 29) }
        case 1000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 30) }
        case 10000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 31) }
        case 100000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 32) }
        case 1000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 33) }
        case 10000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 34) }
        case 100000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 35) }
        case 1000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 36) }
        case 10000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 37) }
        case 100000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 38) }
        case 1000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 39) }
        case 10000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 40) }
        case 100000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 41) }
        case 1000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 42) }
        case 10000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 43) }
        case 100000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 44) }
        case 1000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 45) }
        case 10000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 46) }
        case 100000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 47) }
        case 1000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 48) }
        case 10000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 49) }
        case 100000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 50) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 51) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 52) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 53) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 54) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 55) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 56) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 57) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 58) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 59) }
        default { result := uMAX_UD60x18 }
    }

    if (result.unwrap() == uMAX_UD60x18) {
        unchecked {
            // Inline the fixed-point division to save gas.
            result = wrap(log2(x).unwrap() * uUNIT / uLOG2_10);
        }
    }
}

/// @notice Calculates the binary logarithm of x using the iterative approximation algorithm:
///
/// $$
/// log_2{x} = n + log_2{y}, \text{ where } y = x*2^{-n}, \ y \in [1, 2)
/// $$
///
/// For $0 \leq x \lt 1$, the input is inverted:
///
/// $$
/// log_2{x} = -log_2{\frac{1}{x}}
/// $$
///
/// @dev See https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
///
/// Notes:
/// - Due to the lossy precision of the iterative approximation, the results are not perfectly accurate to the last decimal.
///
/// Requirements:
/// - x must be greater than zero.
///
/// @param x The UD60x18 number for which to calculate the binary logarithm.
/// @return result The binary logarithm as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function log2(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    if (xUint < uUNIT) {
        revert Errors.PRBMath_UD60x18_Log_InputTooSmall(x);
    }

    unchecked {
        // Calculate the integer part of the logarithm.
        uint256 n = Common.msb(xUint / uUNIT);

        // This is the integer part of the logarithm as a UD60x18 number. The operation can't overflow because n
        // n is at most 255 and UNIT is 1e18.
        uint256 resultUint = n * uUNIT;

        // Calculate $y = x * 2^{-n}$.
        uint256 y = xUint >> n;

        // If y is the unit number, the fractional part is zero.
        if (y == uUNIT) {
            return wrap(resultUint);
        }

        // Calculate the fractional part via the iterative approximation.
        // The `delta >>= 1` part is equivalent to `delta /= 2`, but shifting bits is more gas efficient.
        uint256 DOUBLE_UNIT = 2e18;
        for (uint256 delta = uHALF_UNIT; delta > 0; delta >>= 1) {
            y = (y * y) / uUNIT;

            // Is y^2 >= 2e18 and so in the range [2e18, 4e18)?
            if (y >= DOUBLE_UNIT) {
                // Add the 2^{-m} factor to the logarithm.
                resultUint += delta;

                // Halve y, which corresponds to z/2 in the Wikipedia article.
                y >>= 1;
            }
        }
        result = wrap(resultUint);
    }
}

/// @notice Multiplies two UD60x18 numbers together, returning a new UD60x18 number.
///
/// @dev Uses {Common.mulDiv} to enable overflow-safe multiplication and division.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
///
/// @dev See the documentation in {Common.mulDiv18}.
/// @param x The multiplicand as a UD60x18 number.
/// @param y The multiplier as a UD60x18 number.
/// @return result The product as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function mul(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    result = wrap(Common.mulDiv18(x.unwrap(), y.unwrap()));
}

/// @notice Raises x to the power of y.
///
/// For $1 \leq x \leq \infty$, the following standard formula is used:
///
/// $$
/// x^y = 2^{log_2{x} * y}
/// $$
///
/// For $0 \leq x \lt 1$, since the unsigned {log2} is undefined, an equivalent formula is used:
///
/// $$
/// i = \frac{1}{x}
/// w = 2^{log_2{i} * y}
/// x^y = \frac{1}{w}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2} and {mul}.
/// - Returns `UNIT` for 0^0.
/// - It may not perform well with very small values of x. Consider using SD59x18 as an alternative.
///
/// Requirements:
/// - Refer to the requirements in {exp2}, {log2}, and {mul}.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a UD60x18 number.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function pow(UD60x18 x, UD60x18 y) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();
    uint256 yUint = y.unwrap();

    // If both x and y are zero, the result is `UNIT`. If just x is zero, the result is always zero.
    if (xUint == 0) {
        return yUint == 0 ? UNIT : ZERO;
    }
    // If x is `UNIT`, the result is always `UNIT`.
    else if (xUint == uUNIT) {
        return UNIT;
    }

    // If y is zero, the result is always `UNIT`.
    if (yUint == 0) {
        return UNIT;
    }
    // If y is `UNIT`, the result is always x.
    else if (yUint == uUNIT) {
        return x;
    }

    // If x is greater than `UNIT`, use the standard formula.
    if (xUint > uUNIT) {
        result = exp2(mul(log2(x), y));
    }
    // Conversely, if x is less than `UNIT`, use the equivalent formula.
    else {
        UD60x18 i = wrap(uUNIT_SQUARED / xUint);
        UD60x18 w = exp2(mul(log2(i), y));
        result = wrap(uUNIT_SQUARED / w.unwrap());
    }
}

/// @notice Raises x (a UD60x18 number) to the power y (an unsigned basic integer) using the well-known
/// algorithm "exponentiation by squaring".
///
/// @dev See https://en.wikipedia.org/wiki/Exponentiation_by_squaring.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv18}.
/// - Returns `UNIT` for 0^0.
///
/// Requirements:
/// - The result must fit in UD60x18.
///
/// @param x The base as a UD60x18 number.
/// @param y The exponent as a uint256.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function powu(UD60x18 x, uint256 y) pure returns (UD60x18 result) {
    // Calculate the first iteration of the loop in advance.
    uint256 xUint = x.unwrap();
    uint256 resultUint = y & 1 > 0 ? xUint : uUNIT;

    // Equivalent to `for(y /= 2; y > 0; y /= 2)`.
    for (y >>= 1; y > 0; y >>= 1) {
        xUint = Common.mulDiv18(xUint, xUint);

        // Equivalent to `y % 2 == 1`.
        if (y & 1 > 0) {
            resultUint = Common.mulDiv18(resultUint, xUint);
        }
    }
    result = wrap(resultUint);
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must be less than `MAX_UD60x18 / UNIT`.
///
/// @param x The UD60x18 number for which to calculate the square root.
/// @return result The result as a UD60x18 number.
/// @custom:smtchecker abstract-function-nondet
function sqrt(UD60x18 x) pure returns (UD60x18 result) {
    uint256 xUint = x.unwrap();

    unchecked {
        if (xUint > uMAX_UD60x18 / uUNIT) {
            revert Errors.PRBMath_UD60x18_Sqrt_Overflow(x);
        }
        // Multiply x by `UNIT` to account for the factor of `UNIT` picked up when multiplying two UD60x18 numbers.
        // In this case, the two numbers are both the square root.
        result = wrap(Common.sqrt(xUint * uUNIT));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Casting.sol" as Casting;
import "./Helpers.sol" as Helpers;
import "./Math.sol" as Math;

/// @notice The unsigned 60.18-decimal fixed-point number representation, which can have up to 60 digits and up to 18
/// decimals. The values of this are bound by the minimum and the maximum values permitted by the Solidity type uint256.
/// @dev The value type is defined here so it can be imported in all other files.
type UD60x18 is uint256;

/*//////////////////////////////////////////////////////////////////////////
                                    CASTING
//////////////////////////////////////////////////////////////////////////*/

using {
    Casting.intoSD1x18,
    Casting.intoUD2x18,
    Casting.intoSD59x18,
    Casting.intoUint128,
    Casting.intoUint256,
    Casting.intoUint40,
    Casting.unwrap
} for UD60x18 global;

/*//////////////////////////////////////////////////////////////////////////
                            MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

// The global "using for" directive makes the functions in this library callable on the UD60x18 type.
using {
    Math.avg,
    Math.ceil,
    Math.div,
    Math.exp,
    Math.exp2,
    Math.floor,
    Math.frac,
    Math.gm,
    Math.inv,
    Math.ln,
    Math.log10,
    Math.log2,
    Math.mul,
    Math.pow,
    Math.powu,
    Math.sqrt
} for UD60x18 global;

/*//////////////////////////////////////////////////////////////////////////
                                HELPER FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

// The global "using for" directive makes the functions in this library callable on the UD60x18 type.
using {
    Helpers.add,
    Helpers.and,
    Helpers.eq,
    Helpers.gt,
    Helpers.gte,
    Helpers.isZero,
    Helpers.lshift,
    Helpers.lt,
    Helpers.lte,
    Helpers.mod,
    Helpers.neq,
    Helpers.not,
    Helpers.or,
    Helpers.rshift,
    Helpers.sub,
    Helpers.uncheckedAdd,
    Helpers.uncheckedSub,
    Helpers.xor
} for UD60x18 global;

/*//////////////////////////////////////////////////////////////////////////
                                    OPERATORS
//////////////////////////////////////////////////////////////////////////*/

// The global "using for" directive makes it possible to use these operators on the UD60x18 type.
using {
    Helpers.add as +,
    Helpers.and2 as &,
    Math.div as /,
    Helpers.eq as ==,
    Helpers.gt as >,
    Helpers.gte as >=,
    Helpers.lt as <,
    Helpers.lte as <=,
    Helpers.or as |,
    Helpers.mod as %,
    Math.mul as *,
    Helpers.neq as !=,
    Helpers.not as ~,
    Helpers.sub as -,
    Helpers.xor as ^
} for UD60x18 global;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/// @title ISablierLockupRecipient
/// @notice Interface for recipient contracts capable of reacting to cancellations and withdrawals. For this to be able
/// to hook into Sablier, it must fully implement this interface and it must have been allowlisted by the Lockup
/// contract's admin.
/// @dev See {IERC165-supportsInterface}.
/// The implementation MUST implement the {IERC165-supportsInterface} method, which MUST return `true` when called with
/// `0xf8ee98d3`, i.e. `type(ISablierLockupRecipient).interfaceId`.
interface ISablierLockupRecipient is IERC165 {
    /// @notice Responds to cancellations.
    ///
    /// @dev Notes:
    /// - The function MUST return the selector `ISablierLockupRecipient.onSablierLockupCancel.selector`.
    /// - If this function reverts, the execution in the Lockup contract will revert as well.
    ///
    /// @param streamId The ID of the canceled stream.
    /// @param sender The stream's sender, who canceled the stream.
    /// @param senderAmount The amount of assets refunded to the stream's sender, denoted in units of the asset's
    /// decimals.
    /// @param recipientAmount The amount of assets left for the stream's recipient to withdraw, denoted in units of
    /// the asset's decimals.
    ///
    /// @return selector The selector of this function needed to validate the hook.
    function onSablierLockupCancel(
        uint256 streamId,
        address sender,
        uint128 senderAmount,
        uint128 recipientAmount
    )
        external
        returns (bytes4 selector);

    /// @notice Responds to withdrawals triggered by any address except the contract implementing this interface.
    ///
    /// @dev Notes:
    /// - The function MUST return the selector `ISablierLockupRecipient.onSablierLockupWithdraw.selector`.
    /// - If this function reverts, the execution in the Lockup contract will revert as well.
    ///
    /// @param streamId The ID of the stream being withdrawn from.
    /// @param caller The original `msg.sender` address that triggered the withdrawal.
    /// @param to The address receiving the withdrawn assets.
    /// @param amount The amount of assets withdrawn, denoted in units of the asset's decimals.
    ///
    /// @return selector The selector of this function needed to validate the hook.
    function onSablierLockupWithdraw(
        uint256 streamId,
        address caller,
        address to,
        uint128 amount
    )
        external
        returns (bytes4 selector);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC4906 } from "@openzeppelin/contracts/interfaces/IERC4906.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC721Metadata } from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import { UD60x18 } from "@prb/math/src/UD60x18.sol";

import { Lockup } from "../types/DataTypes.sol";
import { IAdminable } from "./IAdminable.sol";
import { ISablierV2NFTDescriptor } from "./ISablierV2NFTDescriptor.sol";

/// @title ISablierV2Lockup
/// @notice Common logic between all Sablier V2 Lockup contracts.
interface ISablierV2Lockup is
    IAdminable, // 0 inherited components
    IERC4906, // 2 inherited components
    IERC721Metadata // 2 inherited components
{
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when the admin allows a new recipient contract to hook to Sablier.
    /// @param admin The address of the current contract admin.
    /// @param recipient The address of the recipient contract put on the allowlist.
    event AllowToHook(address indexed admin, address recipient);

    /// @notice Emitted when a stream is canceled.
    /// @param streamId The ID of the stream.
    /// @param sender The address of the stream's sender.
    /// @param recipient The address of the stream's recipient.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param senderAmount The amount of assets refunded to the stream's sender, denoted in units of the asset's
    /// decimals.
    /// @param recipientAmount The amount of assets left for the stream's recipient to withdraw, denoted in units of the
    /// asset's decimals.
    event CancelLockupStream(
        uint256 streamId,
        address indexed sender,
        address indexed recipient,
        IERC20 indexed asset,
        uint128 senderAmount,
        uint128 recipientAmount
    );

    /// @notice Emitted when a sender gives up the right to cancel a stream.
    /// @param streamId The ID of the stream.
    event RenounceLockupStream(uint256 indexed streamId);

    /// @notice Emitted when the admin sets a new NFT descriptor contract.
    /// @param admin The address of the current contract admin.
    /// @param oldNFTDescriptor The address of the old NFT descriptor contract.
    /// @param newNFTDescriptor The address of the new NFT descriptor contract.
    event SetNFTDescriptor(
        address indexed admin, ISablierV2NFTDescriptor oldNFTDescriptor, ISablierV2NFTDescriptor newNFTDescriptor
    );

    /// @notice Emitted when assets are withdrawn from a stream.
    /// @param streamId The ID of the stream.
    /// @param to The address that has received the withdrawn assets.
    /// @param asset The contract address of the ERC-20 asset to be distributed.
    /// @param amount The amount of assets withdrawn, denoted in units of the asset's decimals.
    event WithdrawFromLockupStream(uint256 indexed streamId, address indexed to, IERC20 indexed asset, uint128 amount);

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Retrieves the address of the ERC-20 asset to be distributed.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getAsset(uint256 streamId) external view returns (IERC20 asset);

    /// @notice Retrieves the amount deposited in the stream, denoted in units of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getDepositedAmount(uint256 streamId) external view returns (uint128 depositedAmount);

    /// @notice Retrieves the stream's end time, which is a Unix timestamp.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getEndTime(uint256 streamId) external view returns (uint40 endTime);

    /// @notice Retrieves the stream's recipient.
    /// @dev Reverts if the NFT has been burned.
    /// @param streamId The stream ID for the query.
    function getRecipient(uint256 streamId) external view returns (address recipient);

    /// @notice Retrieves the amount refunded to the sender after a cancellation, denoted in units of the asset's
    /// decimals. This amount is always zero unless the stream was canceled.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getRefundedAmount(uint256 streamId) external view returns (uint128 refundedAmount);

    /// @notice Retrieves the stream's sender.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getSender(uint256 streamId) external view returns (address sender);

    /// @notice Retrieves the stream's start time, which is a Unix timestamp.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getStartTime(uint256 streamId) external view returns (uint40 startTime);

    /// @notice Retrieves the amount withdrawn from the stream, denoted in units of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function getWithdrawnAmount(uint256 streamId) external view returns (uint128 withdrawnAmount);

    /// @notice Retrieves a flag indicating whether the provided address is a contract allowed to hook to Sablier
    /// when a stream is canceled or when assets are withdrawn.
    /// @dev See {ISablierLockupRecipient} for more information.
    function isAllowedToHook(address recipient) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream can be canceled. When the stream is cold, this
    /// flag is always `false`.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isCancelable(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream is cold, i.e. settled, canceled, or depleted.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isCold(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream is depleted.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isDepleted(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream exists.
    /// @dev Does not revert if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isStream(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream NFT can be transferred.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isTransferable(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves a flag indicating whether the stream is warm, i.e. either pending or streaming.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function isWarm(uint256 streamId) external view returns (bool result);

    /// @notice Retrieves the maximum broker fee that can be charged by the broker, denoted as a fixed-point
    /// number where 1e18 is 100%.
    /// @dev This value is hard coded as a constant.
    function MAX_BROKER_FEE() external view returns (UD60x18);

    /// @notice Counter for stream IDs, used in the create functions.
    function nextStreamId() external view returns (uint256);

    /// @notice Contract that generates the non-fungible token URI.
    function nftDescriptor() external view returns (ISablierV2NFTDescriptor);

    /// @notice Calculates the amount that the sender would be refunded if the stream were canceled, denoted in units
    /// of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function refundableAmountOf(uint256 streamId) external view returns (uint128 refundableAmount);

    /// @notice Retrieves the stream's status.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function statusOf(uint256 streamId) external view returns (Lockup.Status status);

    /// @notice Calculates the amount streamed to the recipient, denoted in units of the asset's decimals.
    /// @dev Reverts if `streamId` references a null stream.
    ///
    /// Notes:
    /// - Upon cancellation of the stream, the amount streamed is calculated as the difference between the deposited
    /// amount and the refunded amount. Ultimately, when the stream becomes depleted, the streamed amount is equivalent
    /// to the total amount withdrawn.
    ///
    /// @param streamId The stream ID for the query.
    function streamedAmountOf(uint256 streamId) external view returns (uint128 streamedAmount);

    /// @notice Retrieves a flag indicating whether the stream was canceled.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function wasCanceled(uint256 streamId) external view returns (bool result);

    /// @notice Calculates the amount that the recipient can withdraw from the stream, denoted in units of the asset's
    /// decimals.
    /// @dev Reverts if `streamId` references a null stream.
    /// @param streamId The stream ID for the query.
    function withdrawableAmountOf(uint256 streamId) external view returns (uint128 withdrawableAmount);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Allows a recipient contract to hook to Sablier when a stream is canceled or when assets are withdrawn.
    /// Useful for implementing contracts that hold streams on behalf of users, such as vaults or staking contracts.
    ///
    /// @dev Emits an {AllowToHook} event.
    ///
    /// Notes:
    /// - Does not revert if the contract is already on the allowlist.
    /// - This is an irreversible operation. The contract cannot be removed from the allowlist.
    ///
    /// Requirements:
    /// - `msg.sender` must be the contract admin.
    /// - `recipient` must have a non-zero code size.
    /// - `recipient` must implement {ISablierLockupRecipient}.
    ///
    /// @param recipient The address of the contract to allow for hooks.
    function allowToHook(address recipient) external;

    /// @notice Burns the NFT associated with the stream.
    ///
    /// @dev Emits a {Transfer} event.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `streamId` must reference a depleted stream.
    /// - The NFT must exist.
    /// - `msg.sender` must be either the NFT owner or an approved third party.
    ///
    /// @param streamId The ID of the stream NFT to burn.
    function burn(uint256 streamId) external;

    /// @notice Cancels the stream and refunds any remaining assets to the sender.
    ///
    /// @dev Emits a {Transfer}, {CancelLockupStream}, and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - If there any assets left for the recipient to withdraw, the stream is marked as canceled. Otherwise, the
    /// stream is marked as depleted.
    /// - This function attempts to invoke a hook on the recipient, if the resolved address is a contract.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - The stream must be warm and cancelable.
    /// - `msg.sender` must be the stream's sender.
    ///
    /// @param streamId The ID of the stream to cancel.
    function cancel(uint256 streamId) external;

    /// @notice Cancels multiple streams and refunds any remaining assets to the sender.
    ///
    /// @dev Emits multiple {Transfer}, {CancelLockupStream}, and {MetadataUpdate} events.
    ///
    /// Notes:
    /// - Refer to the notes in {cancel}.
    ///
    /// Requirements:
    /// - All requirements from {cancel} must be met for each stream.
    ///
    /// @param streamIds The IDs of the streams to cancel.
    function cancelMultiple(uint256[] calldata streamIds) external;

    /// @notice Removes the right of the stream's sender to cancel the stream.
    ///
    /// @dev Emits a {RenounceLockupStream} and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - This is an irreversible operation.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `streamId` must reference a warm stream.
    /// - `msg.sender` must be the stream's sender.
    /// - The stream must be cancelable.
    ///
    /// @param streamId The ID of the stream to renounce.
    function renounce(uint256 streamId) external;

    /// @notice Sets a new NFT descriptor contract, which produces the URI describing the Sablier stream NFTs.
    ///
    /// @dev Emits a {SetNFTDescriptor} and {BatchMetadataUpdate} event.
    ///
    /// Notes:
    /// - Does not revert if the NFT descriptor is the same.
    ///
    /// Requirements:
    /// - `msg.sender` must be the contract admin.
    ///
    /// @param newNFTDescriptor The address of the new NFT descriptor contract.
    function setNFTDescriptor(ISablierV2NFTDescriptor newNFTDescriptor) external;

    /// @notice Withdraws the provided amount of assets from the stream to the `to` address.
    ///
    /// @dev Emits a {Transfer}, {WithdrawFromLockupStream}, and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - This function attempts to call a hook on the recipient of the stream, unless `msg.sender` is the recipient.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - `streamId` must not reference a null or depleted stream.
    /// - `to` must not be the zero address.
    /// - `amount` must be greater than zero and must not exceed the withdrawable amount.
    /// - `to` must be the recipient if `msg.sender` is not the stream's recipient or an approved third party.
    ///
    /// @param streamId The ID of the stream to withdraw from.
    /// @param to The address receiving the withdrawn assets.
    /// @param amount The amount to withdraw, denoted in units of the asset's decimals.
    function withdraw(uint256 streamId, address to, uint128 amount) external;

    /// @notice Withdraws the maximum withdrawable amount from the stream to the provided address `to`.
    ///
    /// @dev Emits a {Transfer}, {WithdrawFromLockupStream}, and {MetadataUpdate} event.
    ///
    /// Notes:
    /// - Refer to the notes in {withdraw}.
    ///
    /// Requirements:
    /// - Refer to the requirements in {withdraw}.
    ///
    /// @param streamId The ID of the stream to withdraw from.
    /// @param to The address receiving the withdrawn assets.
    /// @return withdrawnAmount The amount withdrawn, denoted in units of the asset's decimals.
    function withdrawMax(uint256 streamId, address to) external returns (uint128 withdrawnAmount);

    /// @notice Withdraws the maximum withdrawable amount from the stream to the current recipient, and transfers the
    /// NFT to `newRecipient`.
    ///
    /// @dev Emits a {WithdrawFromLockupStream} and a {Transfer} event.
    ///
    /// Notes:
    /// - If the withdrawable amount is zero, the withdrawal is skipped.
    /// - Refer to the notes in {withdraw}.
    ///
    /// Requirements:
    /// - `msg.sender` must be the stream's recipient.
    /// - Refer to the requirements in {withdraw}.
    /// - Refer to the requirements in {IERC721.transferFrom}.
    ///
    /// @param streamId The ID of the stream NFT to transfer.
    /// @param newRecipient The address of the new owner of the stream NFT.
    /// @return withdrawnAmount The amount withdrawn, denoted in units of the asset's decimals.
    function withdrawMaxAndTransfer(
        uint256 streamId,
        address newRecipient
    )
        external
        returns (uint128 withdrawnAmount);

    /// @notice Withdraws assets from streams to the recipient of each stream.
    ///
    /// @dev Emits multiple {Transfer}, {WithdrawFromLockupStream}, and {MetadataUpdate} events.
    ///
    /// Notes:
    /// - This function attempts to call a hook on the recipient of each stream, unless `msg.sender` is the recipient.
    ///
    /// Requirements:
    /// - Must not be delegate called.
    /// - There must be an equal number of `streamIds` and `amounts`.
    /// - Each stream ID in the array must not reference a null or depleted stream.
    /// - Each amount in the array must be greater than zero and must not exceed the withdrawable amount.
    ///
    /// @param streamIds The IDs of the streams to withdraw from.
    /// @param amounts The amounts to withdraw, denoted in units of the asset's decimals.
    function withdrawMultiple(uint256[] calldata streamIds, uint128[] calldata amounts) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IERC721Metadata } from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import { UD60x18 } from "@prb/math/src/UD60x18.sol";

/// @title Errors
/// @notice Library containing all custom errors the protocol may revert with.
library Errors {
    /*//////////////////////////////////////////////////////////////////////////
                                      GENERICS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when `msg.sender` is not the admin.
    error CallerNotAdmin(address admin, address caller);

    /// @notice Thrown when trying to delegate call to a function that disallows delegate calls.
    error DelegateCall();

    /*//////////////////////////////////////////////////////////////////////////
                                 SABLIER-V2-LOCKUP
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to allow to hook a contract that doesn't implement the interface correctly.
    error SablierV2Lockup_AllowToHookUnsupportedInterface(address recipient);

    /// @notice Thrown when trying to allow to hook an address with no code.
    error SablierV2Lockup_AllowToHookZeroCodeSize(address recipient);

    /// @notice Thrown when the broker fee exceeds the maximum allowed fee.
    error SablierV2Lockup_BrokerFeeTooHigh(UD60x18 brokerFee, UD60x18 maxBrokerFee);

    /// @notice Thrown when trying to create a stream with a zero deposit amount.
    error SablierV2Lockup_DepositAmountZero();

    /// @notice Thrown when trying to create a stream with an end time not in the future.
    error SablierV2Lockup_EndTimeNotInTheFuture(uint40 blockTimestamp, uint40 endTime);

    /// @notice Thrown when the hook does not return the correct selector.
    error SablierV2Lockup_InvalidHookSelector(address recipient);

    /// @notice Thrown when trying to transfer Stream NFT when transferability is disabled.
    error SablierV2Lockup_NotTransferable(uint256 tokenId);

    /// @notice Thrown when the ID references a null stream.
    error SablierV2Lockup_Null(uint256 streamId);

    /// @notice Thrown when trying to withdraw an amount greater than the withdrawable amount.
    error SablierV2Lockup_Overdraw(uint256 streamId, uint128 amount, uint128 withdrawableAmount);

    /// @notice Thrown when trying to create a stream with a zero start time.
    error SablierV2Lockup_StartTimeZero();

    /// @notice Thrown when trying to cancel or renounce a canceled stream.
    error SablierV2Lockup_StreamCanceled(uint256 streamId);

    /// @notice Thrown when trying to cancel, renounce, or withdraw from a depleted stream.
    error SablierV2Lockup_StreamDepleted(uint256 streamId);

    /// @notice Thrown when trying to cancel or renounce a stream that is not cancelable.
    error SablierV2Lockup_StreamNotCancelable(uint256 streamId);

    /// @notice Thrown when trying to burn a stream that is not depleted.
    error SablierV2Lockup_StreamNotDepleted(uint256 streamId);

    /// @notice Thrown when trying to cancel or renounce a settled stream.
    error SablierV2Lockup_StreamSettled(uint256 streamId);

    /// @notice Thrown when `msg.sender` lacks authorization to perform an action.
    error SablierV2Lockup_Unauthorized(uint256 streamId, address caller);

    /// @notice Thrown when trying to withdraw to an address other than the recipient's.
    error SablierV2Lockup_WithdrawalAddressNotRecipient(uint256 streamId, address caller, address to);

    /// @notice Thrown when trying to withdraw zero assets from a stream.
    error SablierV2Lockup_WithdrawAmountZero(uint256 streamId);

    /// @notice Thrown when trying to withdraw from multiple streams and the number of stream IDs does
    /// not match the number of withdraw amounts.
    error SablierV2Lockup_WithdrawArrayCountsNotEqual(uint256 streamIdsCount, uint256 amountsCount);

    /// @notice Thrown when trying to withdraw to the zero address.
    error SablierV2Lockup_WithdrawToZeroAddress(uint256 streamId);

    /*//////////////////////////////////////////////////////////////////////////
                             SABLIER-V2-LOCKUP-DYNAMIC
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to create a stream with a deposit amount not equal to the sum of the
    /// segment amounts.
    error SablierV2LockupDynamic_DepositAmountNotEqualToSegmentAmountsSum(
        uint128 depositAmount, uint128 segmentAmountsSum
    );

    /// @notice Thrown when trying to create a stream with more segments than the maximum allowed.
    error SablierV2LockupDynamic_SegmentCountTooHigh(uint256 count);

    /// @notice Thrown when trying to create a stream with no segments.
    error SablierV2LockupDynamic_SegmentCountZero();

    /// @notice Thrown when trying to create a stream with unordered segment timestamps.
    error SablierV2LockupDynamic_SegmentTimestampsNotOrdered(
        uint256 index, uint40 previousTimestamp, uint40 currentTimestamp
    );

    /// @notice Thrown when trying to create a stream with a start time not strictly less than the first
    /// segment timestamp.
    error SablierV2LockupDynamic_StartTimeNotLessThanFirstSegmentTimestamp(
        uint40 startTime, uint40 firstSegmentTimestamp
    );

    /*//////////////////////////////////////////////////////////////////////////
                              SABLIER-V2-LOCKUP-LINEAR
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to create a stream with a cliff time not strictly less than the end time.
    error SablierV2LockupLinear_CliffTimeNotLessThanEndTime(uint40 cliffTime, uint40 endTime);

    /// @notice Thrown when trying to create a stream with a start time not strictly less than the cliff time, when the
    /// cliff time does not have a zero value.
    error SablierV2LockupLinear_StartTimeNotLessThanCliffTime(uint40 startTime, uint40 cliffTime);

    /// @notice Thrown when trying to create a stream with a start time not strictly less than the end time.
    error SablierV2LockupLinear_StartTimeNotLessThanEndTime(uint40 startTime, uint40 endTime);

    /*//////////////////////////////////////////////////////////////////////////
                             SABLIER-V2-NFT-DESCRIPTOR
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to generate the token URI for an unknown ERC-721 NFT contract.
    error SablierV2NFTDescriptor_UnknownNFT(IERC721Metadata nft, string symbol);

    /*//////////////////////////////////////////////////////////////////////////
                             SABLIER-V2-LOCKUP-TRANCHE
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Thrown when trying to create a stream with a deposit amount not equal to the sum of the
    /// tranche amounts.
    error SablierV2LockupTranched_DepositAmountNotEqualToTrancheAmountsSum(
        uint128 depositAmount, uint128 trancheAmountsSum
    );

    /// @notice Thrown when trying to create a stream with a start time not strictly less than the first
    /// tranche timestamp.
    error SablierV2LockupTranched_StartTimeNotLessThanFirstTrancheTimestamp(
        uint40 startTime, uint40 firstTrancheTimestamp
    );

    /// @notice Thrown when trying to create a stream with more tranches than the maximum allowed.
    error SablierV2LockupTranched_TrancheCountTooHigh(uint256 count);

    /// @notice Thrown when trying to create a stream with no tranches.
    error SablierV2LockupTranched_TrancheCountZero();

    /// @notice Thrown when trying to create a stream with unordered tranche timestamps.
    error SablierV2LockupTranched_TrancheTimestampsNotOrdered(
        uint256 index, uint40 previousTimestamp, uint40 currentTimestamp
    );
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { IAdminable } from "../interfaces/IAdminable.sol";
import { Errors } from "../libraries/Errors.sol";

/// @title Adminable
/// @notice See the documentation in {IAdminable}.
abstract contract Adminable is IAdminable {
    /*//////////////////////////////////////////////////////////////////////////
                                  STATE VARIABLES
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc IAdminable
    address public override admin;

    /*//////////////////////////////////////////////////////////////////////////
                                      MODIFIERS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Reverts if called by any account other than the admin.
    modifier onlyAdmin() {
        if (admin != msg.sender) {
            revert Errors.CallerNotAdmin({ admin: admin, caller: msg.sender });
        }
        _;
    }

    /*//////////////////////////////////////////////////////////////////////////
                         USER-FACING NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @inheritdoc IAdminable
    function transferAdmin(address newAdmin) public virtual override onlyAdmin {
        // Effect: update the admin.
        admin = newAdmin;

        // Log the transfer of the admin.
        emit IAdminable.TransferAdmin({ oldAdmin: msg.sender, newAdmin: newAdmin });
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

import { Errors } from "../libraries/Errors.sol";

/// @title NoDelegateCall
/// @notice This contract implements logic to prevent delegate calls.
abstract contract NoDelegateCall {
    /// @dev The address of the original contract that was deployed.
    address private immutable ORIGINAL;

    /// @dev Sets the original contract address.
    constructor() {
        ORIGINAL = address(this);
    }

    /// @notice Prevents delegate calls.
    modifier noDelegateCall() {
        _preventDelegateCall();
        _;
    }

    /// @dev This function checks whether the current call is a delegate call, and reverts if it is.
    ///
    /// - A private function is used instead of inlining this logic in a modifier because Solidity copies modifiers into
    /// every function that uses them. The `ORIGINAL` address would get copied in every place the modifier is used,
    /// which would increase the contract size. By using a function instead, we can avoid this duplication of code
    /// and reduce the overall size of the contract.
    function _preventDelegateCall() private view {
        if (address(this) != ORIGINAL) {
            revert Errors.DelegateCall();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

/*

██████╗ ██████╗ ██████╗ ███╗   ███╗ █████╗ ████████╗██╗  ██╗
██╔══██╗██╔══██╗██╔══██╗████╗ ████║██╔══██╗╚══██╔══╝██║  ██║
██████╔╝██████╔╝██████╔╝██╔████╔██║███████║   ██║   ███████║
██╔═══╝ ██╔══██╗██╔══██╗██║╚██╔╝██║██╔══██║   ██║   ██╔══██║
██║     ██║  ██║██████╔╝██║ ╚═╝ ██║██║  ██║   ██║   ██║  ██║
╚═╝     ╚═╝  ╚═╝╚═════╝ ╚═╝     ╚═╝╚═╝  ╚═╝   ╚═╝   ╚═╝  ╚═╝

██╗   ██╗██████╗ ██████╗ ██╗  ██╗ ██╗ █████╗
██║   ██║██╔══██╗╚════██╗╚██╗██╔╝███║██╔══██╗
██║   ██║██║  ██║ █████╔╝ ╚███╔╝ ╚██║╚█████╔╝
██║   ██║██║  ██║██╔═══╝  ██╔██╗  ██║██╔══██╗
╚██████╔╝██████╔╝███████╗██╔╝ ██╗ ██║╚█████╔╝
 ╚═════╝ ╚═════╝ ╚══════╝╚═╝  ╚═╝ ╚═╝ ╚════╝

*/

import "./ud2x18/Casting.sol";
import "./ud2x18/Constants.sol";
import "./ud2x18/Errors.sol";
import "./ud2x18/ValueType.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

// Common.sol
//
// Common mathematical functions used in both SD59x18 and UD60x18. Note that these global functions do not
// always operate with SD59x18 and UD60x18 numbers.

/*//////////////////////////////////////////////////////////////////////////
                                CUSTOM ERRORS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Thrown when the resultant value in {mulDiv} overflows uint256.
error PRBMath_MulDiv_Overflow(uint256 x, uint256 y, uint256 denominator);

/// @notice Thrown when the resultant value in {mulDiv18} overflows uint256.
error PRBMath_MulDiv18_Overflow(uint256 x, uint256 y);

/// @notice Thrown when one of the inputs passed to {mulDivSigned} is `type(int256).min`.
error PRBMath_MulDivSigned_InputTooSmall();

/// @notice Thrown when the resultant value in {mulDivSigned} overflows int256.
error PRBMath_MulDivSigned_Overflow(int256 x, int256 y);

/*//////////////////////////////////////////////////////////////////////////
                                    CONSTANTS
//////////////////////////////////////////////////////////////////////////*/

/// @dev The maximum value a uint128 number can have.
uint128 constant MAX_UINT128 = type(uint128).max;

/// @dev The maximum value a uint40 number can have.
uint40 constant MAX_UINT40 = type(uint40).max;

/// @dev The unit number, which the decimal precision of the fixed-point types.
uint256 constant UNIT = 1e18;

/// @dev The unit number inverted mod 2^256.
uint256 constant UNIT_INVERSE = 78156646155174841979727994598816262306175212592076161876661_508869554232690281;

/// @dev The the largest power of two that divides the decimal value of `UNIT`. The logarithm of this value is the least significant
/// bit in the binary representation of `UNIT`.
uint256 constant UNIT_LPOTD = 262144;

/*//////////////////////////////////////////////////////////////////////////
                                    FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

/// @notice Calculates the binary exponent of x using the binary fraction method.
/// @dev Has to use 192.64-bit fixed-point numbers. See https://ethereum.stackexchange.com/a/96594/24693.
/// @param x The exponent as an unsigned 192.64-bit fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function exp2(uint256 x) pure returns (uint256 result) {
    unchecked {
        // Start from 0.5 in the 192.64-bit fixed-point format.
        result = 0x800000000000000000000000000000000000000000000000;

        // The following logic multiplies the result by $\sqrt{2^{-i}}$ when the bit at position i is 1. Key points:
        //
        // 1. Intermediate results will not overflow, as the starting point is 2^191 and all magic factors are under 2^65.
        // 2. The rationale for organizing the if statements into groups of 8 is gas savings. If the result of performing
        // a bitwise AND operation between x and any value in the array [0x80; 0x40; 0x20; 0x10; 0x08; 0x04; 0x02; 0x01] is 1,
        // we know that `x & 0xFF` is also 1.
        if (x & 0xFF00000000000000 > 0) {
            if (x & 0x8000000000000000 > 0) {
                result = (result * 0x16A09E667F3BCC909) >> 64;
            }
            if (x & 0x4000000000000000 > 0) {
                result = (result * 0x1306FE0A31B7152DF) >> 64;
            }
            if (x & 0x2000000000000000 > 0) {
                result = (result * 0x1172B83C7D517ADCE) >> 64;
            }
            if (x & 0x1000000000000000 > 0) {
                result = (result * 0x10B5586CF9890F62A) >> 64;
            }
            if (x & 0x800000000000000 > 0) {
                result = (result * 0x1059B0D31585743AE) >> 64;
            }
            if (x & 0x400000000000000 > 0) {
                result = (result * 0x102C9A3E778060EE7) >> 64;
            }
            if (x & 0x200000000000000 > 0) {
                result = (result * 0x10163DA9FB33356D8) >> 64;
            }
            if (x & 0x100000000000000 > 0) {
                result = (result * 0x100B1AFA5ABCBED61) >> 64;
            }
        }

        if (x & 0xFF000000000000 > 0) {
            if (x & 0x80000000000000 > 0) {
                result = (result * 0x10058C86DA1C09EA2) >> 64;
            }
            if (x & 0x40000000000000 > 0) {
                result = (result * 0x1002C605E2E8CEC50) >> 64;
            }
            if (x & 0x20000000000000 > 0) {
                result = (result * 0x100162F3904051FA1) >> 64;
            }
            if (x & 0x10000000000000 > 0) {
                result = (result * 0x1000B175EFFDC76BA) >> 64;
            }
            if (x & 0x8000000000000 > 0) {
                result = (result * 0x100058BA01FB9F96D) >> 64;
            }
            if (x & 0x4000000000000 > 0) {
                result = (result * 0x10002C5CC37DA9492) >> 64;
            }
            if (x & 0x2000000000000 > 0) {
                result = (result * 0x1000162E525EE0547) >> 64;
            }
            if (x & 0x1000000000000 > 0) {
                result = (result * 0x10000B17255775C04) >> 64;
            }
        }

        if (x & 0xFF0000000000 > 0) {
            if (x & 0x800000000000 > 0) {
                result = (result * 0x1000058B91B5BC9AE) >> 64;
            }
            if (x & 0x400000000000 > 0) {
                result = (result * 0x100002C5C89D5EC6D) >> 64;
            }
            if (x & 0x200000000000 > 0) {
                result = (result * 0x10000162E43F4F831) >> 64;
            }
            if (x & 0x100000000000 > 0) {
                result = (result * 0x100000B1721BCFC9A) >> 64;
            }
            if (x & 0x80000000000 > 0) {
                result = (result * 0x10000058B90CF1E6E) >> 64;
            }
            if (x & 0x40000000000 > 0) {
                result = (result * 0x1000002C5C863B73F) >> 64;
            }
            if (x & 0x20000000000 > 0) {
                result = (result * 0x100000162E430E5A2) >> 64;
            }
            if (x & 0x10000000000 > 0) {
                result = (result * 0x1000000B172183551) >> 64;
            }
        }

        if (x & 0xFF00000000 > 0) {
            if (x & 0x8000000000 > 0) {
                result = (result * 0x100000058B90C0B49) >> 64;
            }
            if (x & 0x4000000000 > 0) {
                result = (result * 0x10000002C5C8601CC) >> 64;
            }
            if (x & 0x2000000000 > 0) {
                result = (result * 0x1000000162E42FFF0) >> 64;
            }
            if (x & 0x1000000000 > 0) {
                result = (result * 0x10000000B17217FBB) >> 64;
            }
            if (x & 0x800000000 > 0) {
                result = (result * 0x1000000058B90BFCE) >> 64;
            }
            if (x & 0x400000000 > 0) {
                result = (result * 0x100000002C5C85FE3) >> 64;
            }
            if (x & 0x200000000 > 0) {
                result = (result * 0x10000000162E42FF1) >> 64;
            }
            if (x & 0x100000000 > 0) {
                result = (result * 0x100000000B17217F8) >> 64;
            }
        }

        if (x & 0xFF000000 > 0) {
            if (x & 0x80000000 > 0) {
                result = (result * 0x10000000058B90BFC) >> 64;
            }
            if (x & 0x40000000 > 0) {
                result = (result * 0x1000000002C5C85FE) >> 64;
            }
            if (x & 0x20000000 > 0) {
                result = (result * 0x100000000162E42FF) >> 64;
            }
            if (x & 0x10000000 > 0) {
                result = (result * 0x1000000000B17217F) >> 64;
            }
            if (x & 0x8000000 > 0) {
                result = (result * 0x100000000058B90C0) >> 64;
            }
            if (x & 0x4000000 > 0) {
                result = (result * 0x10000000002C5C860) >> 64;
            }
            if (x & 0x2000000 > 0) {
                result = (result * 0x1000000000162E430) >> 64;
            }
            if (x & 0x1000000 > 0) {
                result = (result * 0x10000000000B17218) >> 64;
            }
        }

        if (x & 0xFF0000 > 0) {
            if (x & 0x800000 > 0) {
                result = (result * 0x1000000000058B90C) >> 64;
            }
            if (x & 0x400000 > 0) {
                result = (result * 0x100000000002C5C86) >> 64;
            }
            if (x & 0x200000 > 0) {
                result = (result * 0x10000000000162E43) >> 64;
            }
            if (x & 0x100000 > 0) {
                result = (result * 0x100000000000B1721) >> 64;
            }
            if (x & 0x80000 > 0) {
                result = (result * 0x10000000000058B91) >> 64;
            }
            if (x & 0x40000 > 0) {
                result = (result * 0x1000000000002C5C8) >> 64;
            }
            if (x & 0x20000 > 0) {
                result = (result * 0x100000000000162E4) >> 64;
            }
            if (x & 0x10000 > 0) {
                result = (result * 0x1000000000000B172) >> 64;
            }
        }

        if (x & 0xFF00 > 0) {
            if (x & 0x8000 > 0) {
                result = (result * 0x100000000000058B9) >> 64;
            }
            if (x & 0x4000 > 0) {
                result = (result * 0x10000000000002C5D) >> 64;
            }
            if (x & 0x2000 > 0) {
                result = (result * 0x1000000000000162E) >> 64;
            }
            if (x & 0x1000 > 0) {
                result = (result * 0x10000000000000B17) >> 64;
            }
            if (x & 0x800 > 0) {
                result = (result * 0x1000000000000058C) >> 64;
            }
            if (x & 0x400 > 0) {
                result = (result * 0x100000000000002C6) >> 64;
            }
            if (x & 0x200 > 0) {
                result = (result * 0x10000000000000163) >> 64;
            }
            if (x & 0x100 > 0) {
                result = (result * 0x100000000000000B1) >> 64;
            }
        }

        if (x & 0xFF > 0) {
            if (x & 0x80 > 0) {
                result = (result * 0x10000000000000059) >> 64;
            }
            if (x & 0x40 > 0) {
                result = (result * 0x1000000000000002C) >> 64;
            }
            if (x & 0x20 > 0) {
                result = (result * 0x10000000000000016) >> 64;
            }
            if (x & 0x10 > 0) {
                result = (result * 0x1000000000000000B) >> 64;
            }
            if (x & 0x8 > 0) {
                result = (result * 0x10000000000000006) >> 64;
            }
            if (x & 0x4 > 0) {
                result = (result * 0x10000000000000003) >> 64;
            }
            if (x & 0x2 > 0) {
                result = (result * 0x10000000000000001) >> 64;
            }
            if (x & 0x1 > 0) {
                result = (result * 0x10000000000000001) >> 64;
            }
        }

        // In the code snippet below, two operations are executed simultaneously:
        //
        // 1. The result is multiplied by $(2^n + 1)$, where $2^n$ represents the integer part, and the additional 1
        // accounts for the initial guess of 0.5. This is achieved by subtracting from 191 instead of 192.
        // 2. The result is then converted to an unsigned 60.18-decimal fixed-point format.
        //
        // The underlying logic is based on the relationship $2^{191-ip} = 2^{ip} / 2^{191}$, where $ip$ denotes the,
        // integer part, $2^n$.
        result *= UNIT;
        result >>= (191 - (x >> 64));
    }
}

/// @notice Finds the zero-based index of the first 1 in the binary representation of x.
///
/// @dev See the note on "msb" in this Wikipedia article: https://en.wikipedia.org/wiki/Find_first_set
///
/// Each step in this implementation is equivalent to this high-level code:
///
/// ```solidity
/// if (x >= 2 ** 128) {
///     x >>= 128;
///     result += 128;
/// }
/// ```
///
/// Where 128 is replaced with each respective power of two factor. See the full high-level implementation here:
/// https://gist.github.com/PaulRBerg/f932f8693f2733e30c4d479e8e980948
///
/// The Yul instructions used below are:
///
/// - "gt" is "greater than"
/// - "or" is the OR bitwise operator
/// - "shl" is "shift left"
/// - "shr" is "shift right"
///
/// @param x The uint256 number for which to find the index of the most significant bit.
/// @return result The index of the most significant bit as a uint256.
/// @custom:smtchecker abstract-function-nondet
function msb(uint256 x) pure returns (uint256 result) {
    // 2^128
    assembly ("memory-safe") {
        let factor := shl(7, gt(x, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^64
    assembly ("memory-safe") {
        let factor := shl(6, gt(x, 0xFFFFFFFFFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^32
    assembly ("memory-safe") {
        let factor := shl(5, gt(x, 0xFFFFFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^16
    assembly ("memory-safe") {
        let factor := shl(4, gt(x, 0xFFFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^8
    assembly ("memory-safe") {
        let factor := shl(3, gt(x, 0xFF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^4
    assembly ("memory-safe") {
        let factor := shl(2, gt(x, 0xF))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^2
    assembly ("memory-safe") {
        let factor := shl(1, gt(x, 0x3))
        x := shr(factor, x)
        result := or(result, factor)
    }
    // 2^1
    // No need to shift x any more.
    assembly ("memory-safe") {
        let factor := gt(x, 0x1)
        result := or(result, factor)
    }
}

/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev Credits to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - The denominator must not be zero.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as a uint256.
/// @param y The multiplier as a uint256.
/// @param denominator The divisor as a uint256.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function mulDiv(uint256 x, uint256 y, uint256 denominator) pure returns (uint256 result) {
    // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
    // use the Chinese Remainder Theorem to reconstruct the 512-bit result. The result is stored in two 256
    // variables such that product = prod1 * 2^256 + prod0.
    uint256 prod0; // Least significant 256 bits of the product
    uint256 prod1; // Most significant 256 bits of the product
    assembly ("memory-safe") {
        let mm := mulmod(x, y, not(0))
        prod0 := mul(x, y)
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
    }

    // Handle non-overflow cases, 256 by 256 division.
    if (prod1 == 0) {
        unchecked {
            return prod0 / denominator;
        }
    }

    // Make sure the result is less than 2^256. Also prevents denominator == 0.
    if (prod1 >= denominator) {
        revert PRBMath_MulDiv_Overflow(x, y, denominator);
    }

    ////////////////////////////////////////////////////////////////////////////
    // 512 by 256 division
    ////////////////////////////////////////////////////////////////////////////

    // Make division exact by subtracting the remainder from [prod1 prod0].
    uint256 remainder;
    assembly ("memory-safe") {
        // Compute remainder using the mulmod Yul instruction.
        remainder := mulmod(x, y, denominator)

        // Subtract 256 bit number from 512-bit number.
        prod1 := sub(prod1, gt(remainder, prod0))
        prod0 := sub(prod0, remainder)
    }

    unchecked {
        // Calculate the largest power of two divisor of the denominator using the unary operator ~. This operation cannot overflow
        // because the denominator cannot be zero at this point in the function execution. The result is always >= 1.
        // For more detail, see https://cs.stackexchange.com/q/138556/92363.
        uint256 lpotdod = denominator & (~denominator + 1);
        uint256 flippedLpotdod;

        assembly ("memory-safe") {
            // Factor powers of two out of denominator.
            denominator := div(denominator, lpotdod)

            // Divide [prod1 prod0] by lpotdod.
            prod0 := div(prod0, lpotdod)

            // Get the flipped value `2^256 / lpotdod`. If the `lpotdod` is zero, the flipped value is one.
            // `sub(0, lpotdod)` produces the two's complement version of `lpotdod`, which is equivalent to flipping all the bits.
            // However, `div` interprets this value as an unsigned value: https://ethereum.stackexchange.com/q/147168/24693
            flippedLpotdod := add(div(sub(0, lpotdod), lpotdod), 1)
        }

        // Shift in bits from prod1 into prod0.
        prod0 |= prod1 * flippedLpotdod;

        // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
        // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
        // four bits. That is, denominator * inv = 1 mod 2^4.
        uint256 inverse = (3 * denominator) ^ 2;

        // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
        // in modular arithmetic, doubling the correct bits in each step.
        inverse *= 2 - denominator * inverse; // inverse mod 2^8
        inverse *= 2 - denominator * inverse; // inverse mod 2^16
        inverse *= 2 - denominator * inverse; // inverse mod 2^32
        inverse *= 2 - denominator * inverse; // inverse mod 2^64
        inverse *= 2 - denominator * inverse; // inverse mod 2^128
        inverse *= 2 - denominator * inverse; // inverse mod 2^256

        // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
        // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
        // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
        // is no longer required.
        result = prod0 * inverse;
    }
}

/// @notice Calculates x*y÷1e18 with 512-bit precision.
///
/// @dev A variant of {mulDiv} with constant folding, i.e. in which the denominator is hard coded to 1e18.
///
/// Notes:
/// - The body is purposely left uncommented; to understand how this works, see the documentation in {mulDiv}.
/// - The result is rounded toward zero.
/// - We take as an axiom that the result cannot be `MAX_UINT256` when x and y solve the following system of equations:
///
/// $$
/// \begin{cases}
///     x * y = MAX\_UINT256 * UNIT \\
///     (x * y) \% UNIT \geq \frac{UNIT}{2}
/// \end{cases}
/// $$
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - The result must fit in uint256.
///
/// @param x The multiplicand as an unsigned 60.18-decimal fixed-point number.
/// @param y The multiplier as an unsigned 60.18-decimal fixed-point number.
/// @return result The result as an unsigned 60.18-decimal fixed-point number.
/// @custom:smtchecker abstract-function-nondet
function mulDiv18(uint256 x, uint256 y) pure returns (uint256 result) {
    uint256 prod0;
    uint256 prod1;
    assembly ("memory-safe") {
        let mm := mulmod(x, y, not(0))
        prod0 := mul(x, y)
        prod1 := sub(sub(mm, prod0), lt(mm, prod0))
    }

    if (prod1 == 0) {
        unchecked {
            return prod0 / UNIT;
        }
    }

    if (prod1 >= UNIT) {
        revert PRBMath_MulDiv18_Overflow(x, y);
    }

    uint256 remainder;
    assembly ("memory-safe") {
        remainder := mulmod(x, y, UNIT)
        result :=
            mul(
                or(
                    div(sub(prod0, remainder), UNIT_LPOTD),
                    mul(sub(prod1, gt(remainder, prod0)), add(div(sub(0, UNIT_LPOTD), UNIT_LPOTD), 1))
                ),
                UNIT_INVERSE
            )
    }
}

/// @notice Calculates x*y÷denominator with 512-bit precision.
///
/// @dev This is an extension of {mulDiv} for signed numbers, which works by computing the signs and the absolute values separately.
///
/// Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - Refer to the requirements in {mulDiv}.
/// - None of the inputs can be `type(int256).min`.
/// - The result must fit in int256.
///
/// @param x The multiplicand as an int256.
/// @param y The multiplier as an int256.
/// @param denominator The divisor as an int256.
/// @return result The result as an int256.
/// @custom:smtchecker abstract-function-nondet
function mulDivSigned(int256 x, int256 y, int256 denominator) pure returns (int256 result) {
    if (x == type(int256).min || y == type(int256).min || denominator == type(int256).min) {
        revert PRBMath_MulDivSigned_InputTooSmall();
    }

    // Get hold of the absolute values of x, y and the denominator.
    uint256 xAbs;
    uint256 yAbs;
    uint256 dAbs;
    unchecked {
        xAbs = x < 0 ? uint256(-x) : uint256(x);
        yAbs = y < 0 ? uint256(-y) : uint256(y);
        dAbs = denominator < 0 ? uint256(-denominator) : uint256(denominator);
    }

    // Compute the absolute value of x*y÷denominator. The result must fit in int256.
    uint256 resultAbs = mulDiv(xAbs, yAbs, dAbs);
    if (resultAbs > uint256(type(int256).max)) {
        revert PRBMath_MulDivSigned_Overflow(x, y);
    }

    // Get the signs of x, y and the denominator.
    uint256 sx;
    uint256 sy;
    uint256 sd;
    assembly ("memory-safe") {
        // "sgt" is the "signed greater than" assembly instruction and "sub(0,1)" is -1 in two's complement.
        sx := sgt(x, sub(0, 1))
        sy := sgt(y, sub(0, 1))
        sd := sgt(denominator, sub(0, 1))
    }

    // XOR over sx, sy and sd. What this does is to check whether there are 1 or 3 negative signs in the inputs.
    // If there are, the result should be negative. Otherwise, it should be positive.
    unchecked {
        result = sx ^ sy ^ sd == 0 ? -int256(resultAbs) : int256(resultAbs);
    }
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - If x is not a perfect square, the result is rounded down.
/// - Credits to OpenZeppelin for the explanations in comments below.
///
/// @param x The uint256 number for which to calculate the square root.
/// @return result The result as a uint256.
/// @custom:smtchecker abstract-function-nondet
function sqrt(uint256 x) pure returns (uint256 result) {
    if (x == 0) {
        return 0;
    }

    // For our first guess, we calculate the biggest power of 2 which is smaller than the square root of x.
    //
    // We know that the "msb" (most significant bit) of x is a power of 2 such that we have:
    //
    // $$
    // msb(x) <= x <= 2*msb(x)$
    // $$
    //
    // We write $msb(x)$ as $2^k$, and we get:
    //
    // $$
    // k = log_2(x)
    // $$
    //
    // Thus, we can write the initial inequality as:
    //
    // $$
    // 2^{log_2(x)} <= x <= 2*2^{log_2(x)+1} \\
    // sqrt(2^k) <= sqrt(x) < sqrt(2^{k+1}) \\
    // 2^{k/2} <= sqrt(x) < 2^{(k+1)/2} <= 2^{(k/2)+1}
    // $$
    //
    // Consequently, $2^{log_2(x) /2} is a good first approximation of sqrt(x) with at least one correct bit.
    uint256 xAux = uint256(x);
    result = 1;
    if (xAux >= 2 ** 128) {
        xAux >>= 128;
        result <<= 64;
    }
    if (xAux >= 2 ** 64) {
        xAux >>= 64;
        result <<= 32;
    }
    if (xAux >= 2 ** 32) {
        xAux >>= 32;
        result <<= 16;
    }
    if (xAux >= 2 ** 16) {
        xAux >>= 16;
        result <<= 8;
    }
    if (xAux >= 2 ** 8) {
        xAux >>= 8;
        result <<= 4;
    }
    if (xAux >= 2 ** 4) {
        xAux >>= 4;
        result <<= 2;
    }
    if (xAux >= 2 ** 2) {
        result <<= 1;
    }

    // At this point, `result` is an estimation with at least one bit of precision. We know the true value has at
    // most 128 bits, since it is the square root of a uint256. Newton's method converges quadratically (precision
    // doubles at every iteration). We thus need at most 7 iteration to turn our partial result with one bit of
    // precision into the expected uint128 result.
    unchecked {
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;
        result = (result + x / result) >> 1;

        // If x is not a perfect square, round the result toward zero.
        uint256 roundedResult = x / result;
        if (result >= roundedResult) {
            result = roundedResult;
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { SD1x18 } from "./ValueType.sol";

/// @dev Euler's number as an SD1x18 number.
SD1x18 constant E = SD1x18.wrap(2_718281828459045235);

/// @dev The maximum value an SD1x18 number can have.
int64 constant uMAX_SD1x18 = 9_223372036854775807;
SD1x18 constant MAX_SD1x18 = SD1x18.wrap(uMAX_SD1x18);

/// @dev The maximum value an SD1x18 number can have.
int64 constant uMIN_SD1x18 = -9_223372036854775808;
SD1x18 constant MIN_SD1x18 = SD1x18.wrap(uMIN_SD1x18);

/// @dev PI as an SD1x18 number.
SD1x18 constant PI = SD1x18.wrap(3_141592653589793238);

/// @dev The unit number, which gives the decimal precision of SD1x18.
SD1x18 constant UNIT = SD1x18.wrap(1e18);
int64 constant uUNIT = 1e18;

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Casting.sol" as Casting;

/// @notice The signed 1.18-decimal fixed-point number representation, which can have up to 1 digit and up to 18
/// decimals. The values of this are bound by the minimum and the maximum values permitted by the underlying Solidity
/// type int64. This is useful when end users want to use int64 to save gas, e.g. with tight variable packing in contract
/// storage.
type SD1x18 is int64;

/*//////////////////////////////////////////////////////////////////////////
                                    CASTING
//////////////////////////////////////////////////////////////////////////*/

using {
    Casting.intoSD59x18,
    Casting.intoUD2x18,
    Casting.intoUD60x18,
    Casting.intoUint256,
    Casting.intoUint128,
    Casting.intoUint40,
    Casting.unwrap
} for SD1x18 global;

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { SD59x18 } from "./ValueType.sol";

// NOTICE: the "u" prefix stands for "unwrapped".

/// @dev Euler's number as an SD59x18 number.
SD59x18 constant E = SD59x18.wrap(2_718281828459045235);

/// @dev The maximum input permitted in {exp}.
int256 constant uEXP_MAX_INPUT = 133_084258667509499440;
SD59x18 constant EXP_MAX_INPUT = SD59x18.wrap(uEXP_MAX_INPUT);

/// @dev Any value less than this returns 0 in {exp}.
int256 constant uEXP_MIN_THRESHOLD = -41_446531673892822322;
SD59x18 constant EXP_MIN_THRESHOLD = SD59x18.wrap(uEXP_MIN_THRESHOLD);

/// @dev The maximum input permitted in {exp2}.
int256 constant uEXP2_MAX_INPUT = 192e18 - 1;
SD59x18 constant EXP2_MAX_INPUT = SD59x18.wrap(uEXP2_MAX_INPUT);

/// @dev Any value less than this returns 0 in {exp2}.
int256 constant uEXP2_MIN_THRESHOLD = -59_794705707972522261;
SD59x18 constant EXP2_MIN_THRESHOLD = SD59x18.wrap(uEXP2_MIN_THRESHOLD);

/// @dev Half the UNIT number.
int256 constant uHALF_UNIT = 0.5e18;
SD59x18 constant HALF_UNIT = SD59x18.wrap(uHALF_UNIT);

/// @dev $log_2(10)$ as an SD59x18 number.
int256 constant uLOG2_10 = 3_321928094887362347;
SD59x18 constant LOG2_10 = SD59x18.wrap(uLOG2_10);

/// @dev $log_2(e)$ as an SD59x18 number.
int256 constant uLOG2_E = 1_442695040888963407;
SD59x18 constant LOG2_E = SD59x18.wrap(uLOG2_E);

/// @dev The maximum value an SD59x18 number can have.
int256 constant uMAX_SD59x18 = 57896044618658097711785492504343953926634992332820282019728_792003956564819967;
SD59x18 constant MAX_SD59x18 = SD59x18.wrap(uMAX_SD59x18);

/// @dev The maximum whole value an SD59x18 number can have.
int256 constant uMAX_WHOLE_SD59x18 = 57896044618658097711785492504343953926634992332820282019728_000000000000000000;
SD59x18 constant MAX_WHOLE_SD59x18 = SD59x18.wrap(uMAX_WHOLE_SD59x18);

/// @dev The minimum value an SD59x18 number can have.
int256 constant uMIN_SD59x18 = -57896044618658097711785492504343953926634992332820282019728_792003956564819968;
SD59x18 constant MIN_SD59x18 = SD59x18.wrap(uMIN_SD59x18);

/// @dev The minimum whole value an SD59x18 number can have.
int256 constant uMIN_WHOLE_SD59x18 = -57896044618658097711785492504343953926634992332820282019728_000000000000000000;
SD59x18 constant MIN_WHOLE_SD59x18 = SD59x18.wrap(uMIN_WHOLE_SD59x18);

/// @dev PI as an SD59x18 number.
SD59x18 constant PI = SD59x18.wrap(3_141592653589793238);

/// @dev The unit number, which gives the decimal precision of SD59x18.
int256 constant uUNIT = 1e18;
SD59x18 constant UNIT = SD59x18.wrap(1e18);

/// @dev The unit number squared.
int256 constant uUNIT_SQUARED = 1e36;
SD59x18 constant UNIT_SQUARED = SD59x18.wrap(uUNIT_SQUARED);

/// @dev Zero as an SD59x18 number.
SD59x18 constant ZERO = SD59x18.wrap(0);

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Casting.sol" as Casting;
import "./Helpers.sol" as Helpers;
import "./Math.sol" as Math;

/// @notice The signed 59.18-decimal fixed-point number representation, which can have up to 59 digits and up to 18
/// decimals. The values of this are bound by the minimum and the maximum values permitted by the underlying Solidity
/// type int256.
type SD59x18 is int256;

/*//////////////////////////////////////////////////////////////////////////
                                    CASTING
//////////////////////////////////////////////////////////////////////////*/

using {
    Casting.intoInt256,
    Casting.intoSD1x18,
    Casting.intoUD2x18,
    Casting.intoUD60x18,
    Casting.intoUint256,
    Casting.intoUint128,
    Casting.intoUint40,
    Casting.unwrap
} for SD59x18 global;

/*//////////////////////////////////////////////////////////////////////////
                            MATHEMATICAL FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

using {
    Math.abs,
    Math.avg,
    Math.ceil,
    Math.div,
    Math.exp,
    Math.exp2,
    Math.floor,
    Math.frac,
    Math.gm,
    Math.inv,
    Math.log10,
    Math.log2,
    Math.ln,
    Math.mul,
    Math.pow,
    Math.powu,
    Math.sqrt
} for SD59x18 global;

/*//////////////////////////////////////////////////////////////////////////
                                HELPER FUNCTIONS
//////////////////////////////////////////////////////////////////////////*/

using {
    Helpers.add,
    Helpers.and,
    Helpers.eq,
    Helpers.gt,
    Helpers.gte,
    Helpers.isZero,
    Helpers.lshift,
    Helpers.lt,
    Helpers.lte,
    Helpers.mod,
    Helpers.neq,
    Helpers.not,
    Helpers.or,
    Helpers.rshift,
    Helpers.sub,
    Helpers.uncheckedAdd,
    Helpers.uncheckedSub,
    Helpers.uncheckedUnary,
    Helpers.xor
} for SD59x18 global;

/*//////////////////////////////////////////////////////////////////////////
                                    OPERATORS
//////////////////////////////////////////////////////////////////////////*/

// The global "using for" directive makes it possible to use these operators on the SD59x18 type.
using {
    Helpers.add as +,
    Helpers.and2 as &,
    Math.div as /,
    Helpers.eq as ==,
    Helpers.gt as >,
    Helpers.gte as >=,
    Helpers.lt as <,
    Helpers.lte as <=,
    Helpers.mod as %,
    Math.mul as *,
    Helpers.neq as !=,
    Helpers.not as ~,
    Helpers.or as |,
    Helpers.sub as -,
    Helpers.unary as -,
    Helpers.xor as ^
} for SD59x18 global;

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { UD2x18 } from "./ValueType.sol";

/// @dev Euler's number as a UD2x18 number.
UD2x18 constant E = UD2x18.wrap(2_718281828459045235);

/// @dev The maximum value a UD2x18 number can have.
uint64 constant uMAX_UD2x18 = 18_446744073709551615;
UD2x18 constant MAX_UD2x18 = UD2x18.wrap(uMAX_UD2x18);

/// @dev PI as a UD2x18 number.
UD2x18 constant PI = UD2x18.wrap(3_141592653589793238);

/// @dev The unit number, which gives the decimal precision of UD2x18.
UD2x18 constant UNIT = UD2x18.wrap(1e18);
uint64 constant uUNIT = 1e18;

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Casting.sol" as Casting;

/// @notice The unsigned 2.18-decimal fixed-point number representation, which can have up to 2 digits and up to 18
/// decimals. The values of this are bound by the minimum and the maximum values permitted by the underlying Solidity
/// type uint64. This is useful when end users want to use uint64 to save gas, e.g. with tight variable packing in contract
/// storage.
type UD2x18 is uint64;

/*//////////////////////////////////////////////////////////////////////////
                                    CASTING
//////////////////////////////////////////////////////////////////////////*/

using {
    Casting.intoSD1x18,
    Casting.intoSD59x18,
    Casting.intoUD60x18,
    Casting.intoUint256,
    Casting.intoUint128,
    Casting.intoUint40,
    Casting.unwrap
} for UD2x18 global;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4906.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";
import {IERC721} from "./IERC721.sol";

/// @title EIP-721 Metadata Update Extension
interface IERC4906 is IERC165, IERC721 {
    /// @dev This event emits when the metadata of a token is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFT.
    event MetadataUpdate(uint256 _tokenId);

    /// @dev This event emits when the metadata of a range of tokens is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFTs.
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.22;

/// @title IAdminable
/// @notice Contract module that provides a basic access control mechanism, with an admin that can be
/// granted exclusive access to specific functions. The inheriting contract must set the initial admin
/// in the constructor.
interface IAdminable {
    /*//////////////////////////////////////////////////////////////////////////
                                       EVENTS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Emitted when the admin is transferred.
    /// @param oldAdmin The address of the old admin.
    /// @param newAdmin The address of the new admin.
    event TransferAdmin(address indexed oldAdmin, address indexed newAdmin);

    /*//////////////////////////////////////////////////////////////////////////
                                 CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice The address of the admin account or contract.
    function admin() external view returns (address);

    /*//////////////////////////////////////////////////////////////////////////
                               NON-CONSTANT FUNCTIONS
    //////////////////////////////////////////////////////////////////////////*/

    /// @notice Transfers the contract admin to a new address.
    ///
    /// @dev Notes:
    /// - Does not revert if the admin is the same.
    /// - This function can potentially leave the contract without an admin, thereby removing any
    /// functionality that is only available to the admin.
    ///
    /// Requirements:
    /// - `msg.sender` must be the contract admin.
    ///
    /// @param newAdmin The address of the new admin.
    function transferAdmin(address newAdmin) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "../Common.sol" as Common;
import "./Errors.sol" as Errors;
import { uMAX_SD1x18 } from "../sd1x18/Constants.sol";
import { SD1x18 } from "../sd1x18/ValueType.sol";
import { SD59x18 } from "../sd59x18/ValueType.sol";
import { UD60x18 } from "../ud60x18/ValueType.sol";
import { UD2x18 } from "./ValueType.sol";

/// @notice Casts a UD2x18 number into SD1x18.
/// - x must be less than or equal to `uMAX_SD1x18`.
function intoSD1x18(UD2x18 x) pure returns (SD1x18 result) {
    uint64 xUint = UD2x18.unwrap(x);
    if (xUint > uint64(uMAX_SD1x18)) {
        revert Errors.PRBMath_UD2x18_IntoSD1x18_Overflow(x);
    }
    result = SD1x18.wrap(int64(xUint));
}

/// @notice Casts a UD2x18 number into SD59x18.
/// @dev There is no overflow check because the domain of UD2x18 is a subset of SD59x18.
function intoSD59x18(UD2x18 x) pure returns (SD59x18 result) {
    result = SD59x18.wrap(int256(uint256(UD2x18.unwrap(x))));
}

/// @notice Casts a UD2x18 number into UD60x18.
/// @dev There is no overflow check because the domain of UD2x18 is a subset of UD60x18.
function intoUD60x18(UD2x18 x) pure returns (UD60x18 result) {
    result = UD60x18.wrap(UD2x18.unwrap(x));
}

/// @notice Casts a UD2x18 number into uint128.
/// @dev There is no overflow check because the domain of UD2x18 is a subset of uint128.
function intoUint128(UD2x18 x) pure returns (uint128 result) {
    result = uint128(UD2x18.unwrap(x));
}

/// @notice Casts a UD2x18 number into uint256.
/// @dev There is no overflow check because the domain of UD2x18 is a subset of uint256.
function intoUint256(UD2x18 x) pure returns (uint256 result) {
    result = uint256(UD2x18.unwrap(x));
}

/// @notice Casts a UD2x18 number into uint40.
/// @dev Requirements:
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(UD2x18 x) pure returns (uint40 result) {
    uint64 xUint = UD2x18.unwrap(x);
    if (xUint > uint64(Common.MAX_UINT40)) {
        revert Errors.PRBMath_UD2x18_IntoUint40_Overflow(x);
    }
    result = uint40(xUint);
}

/// @notice Alias for {wrap}.
function ud2x18(uint64 x) pure returns (UD2x18 result) {
    result = UD2x18.wrap(x);
}

/// @notice Unwrap a UD2x18 number into uint64.
function unwrap(UD2x18 x) pure returns (uint64 result) {
    result = UD2x18.unwrap(x);
}

/// @notice Wraps a uint64 number into UD2x18.
function wrap(uint64 x) pure returns (UD2x18 result) {
    result = UD2x18.wrap(x);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { UD2x18 } from "./ValueType.sol";

/// @notice Thrown when trying to cast a UD2x18 number that doesn't fit in SD1x18.
error PRBMath_UD2x18_IntoSD1x18_Overflow(UD2x18 x);

/// @notice Thrown when trying to cast a UD2x18 number that doesn't fit in uint40.
error PRBMath_UD2x18_IntoUint40_Overflow(UD2x18 x);

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "../Common.sol" as Common;
import "./Errors.sol" as CastingErrors;
import { SD59x18 } from "../sd59x18/ValueType.sol";
import { UD2x18 } from "../ud2x18/ValueType.sol";
import { UD60x18 } from "../ud60x18/ValueType.sol";
import { SD1x18 } from "./ValueType.sol";

/// @notice Casts an SD1x18 number into SD59x18.
/// @dev There is no overflow check because the domain of SD1x18 is a subset of SD59x18.
function intoSD59x18(SD1x18 x) pure returns (SD59x18 result) {
    result = SD59x18.wrap(int256(SD1x18.unwrap(x)));
}

/// @notice Casts an SD1x18 number into UD2x18.
/// - x must be positive.
function intoUD2x18(SD1x18 x) pure returns (UD2x18 result) {
    int64 xInt = SD1x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD1x18_ToUD2x18_Underflow(x);
    }
    result = UD2x18.wrap(uint64(xInt));
}

/// @notice Casts an SD1x18 number into UD60x18.
/// @dev Requirements:
/// - x must be positive.
function intoUD60x18(SD1x18 x) pure returns (UD60x18 result) {
    int64 xInt = SD1x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD1x18_ToUD60x18_Underflow(x);
    }
    result = UD60x18.wrap(uint64(xInt));
}

/// @notice Casts an SD1x18 number into uint256.
/// @dev Requirements:
/// - x must be positive.
function intoUint256(SD1x18 x) pure returns (uint256 result) {
    int64 xInt = SD1x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD1x18_ToUint256_Underflow(x);
    }
    result = uint256(uint64(xInt));
}

/// @notice Casts an SD1x18 number into uint128.
/// @dev Requirements:
/// - x must be positive.
function intoUint128(SD1x18 x) pure returns (uint128 result) {
    int64 xInt = SD1x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD1x18_ToUint128_Underflow(x);
    }
    result = uint128(uint64(xInt));
}

/// @notice Casts an SD1x18 number into uint40.
/// @dev Requirements:
/// - x must be positive.
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(SD1x18 x) pure returns (uint40 result) {
    int64 xInt = SD1x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD1x18_ToUint40_Underflow(x);
    }
    if (xInt > int64(uint64(Common.MAX_UINT40))) {
        revert CastingErrors.PRBMath_SD1x18_ToUint40_Overflow(x);
    }
    result = uint40(uint64(xInt));
}

/// @notice Alias for {wrap}.
function sd1x18(int64 x) pure returns (SD1x18 result) {
    result = SD1x18.wrap(x);
}

/// @notice Unwraps an SD1x18 number into int64.
function unwrap(SD1x18 x) pure returns (int64 result) {
    result = SD1x18.unwrap(x);
}

/// @notice Wraps an int64 number into SD1x18.
function wrap(int64 x) pure returns (SD1x18 result) {
    result = SD1x18.wrap(x);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "./Errors.sol" as CastingErrors;
import { MAX_UINT128, MAX_UINT40 } from "../Common.sol";
import { uMAX_SD1x18, uMIN_SD1x18 } from "../sd1x18/Constants.sol";
import { SD1x18 } from "../sd1x18/ValueType.sol";
import { uMAX_UD2x18 } from "../ud2x18/Constants.sol";
import { UD2x18 } from "../ud2x18/ValueType.sol";
import { UD60x18 } from "../ud60x18/ValueType.sol";
import { SD59x18 } from "./ValueType.sol";

/// @notice Casts an SD59x18 number into int256.
/// @dev This is basically a functional alias for {unwrap}.
function intoInt256(SD59x18 x) pure returns (int256 result) {
    result = SD59x18.unwrap(x);
}

/// @notice Casts an SD59x18 number into SD1x18.
/// @dev Requirements:
/// - x must be greater than or equal to `uMIN_SD1x18`.
/// - x must be less than or equal to `uMAX_SD1x18`.
function intoSD1x18(SD59x18 x) pure returns (SD1x18 result) {
    int256 xInt = SD59x18.unwrap(x);
    if (xInt < uMIN_SD1x18) {
        revert CastingErrors.PRBMath_SD59x18_IntoSD1x18_Underflow(x);
    }
    if (xInt > uMAX_SD1x18) {
        revert CastingErrors.PRBMath_SD59x18_IntoSD1x18_Overflow(x);
    }
    result = SD1x18.wrap(int64(xInt));
}

/// @notice Casts an SD59x18 number into UD2x18.
/// @dev Requirements:
/// - x must be positive.
/// - x must be less than or equal to `uMAX_UD2x18`.
function intoUD2x18(SD59x18 x) pure returns (UD2x18 result) {
    int256 xInt = SD59x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD59x18_IntoUD2x18_Underflow(x);
    }
    if (xInt > int256(uint256(uMAX_UD2x18))) {
        revert CastingErrors.PRBMath_SD59x18_IntoUD2x18_Overflow(x);
    }
    result = UD2x18.wrap(uint64(uint256(xInt)));
}

/// @notice Casts an SD59x18 number into UD60x18.
/// @dev Requirements:
/// - x must be positive.
function intoUD60x18(SD59x18 x) pure returns (UD60x18 result) {
    int256 xInt = SD59x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD59x18_IntoUD60x18_Underflow(x);
    }
    result = UD60x18.wrap(uint256(xInt));
}

/// @notice Casts an SD59x18 number into uint256.
/// @dev Requirements:
/// - x must be positive.
function intoUint256(SD59x18 x) pure returns (uint256 result) {
    int256 xInt = SD59x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD59x18_IntoUint256_Underflow(x);
    }
    result = uint256(xInt);
}

/// @notice Casts an SD59x18 number into uint128.
/// @dev Requirements:
/// - x must be positive.
/// - x must be less than or equal to `uMAX_UINT128`.
function intoUint128(SD59x18 x) pure returns (uint128 result) {
    int256 xInt = SD59x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD59x18_IntoUint128_Underflow(x);
    }
    if (xInt > int256(uint256(MAX_UINT128))) {
        revert CastingErrors.PRBMath_SD59x18_IntoUint128_Overflow(x);
    }
    result = uint128(uint256(xInt));
}

/// @notice Casts an SD59x18 number into uint40.
/// @dev Requirements:
/// - x must be positive.
/// - x must be less than or equal to `MAX_UINT40`.
function intoUint40(SD59x18 x) pure returns (uint40 result) {
    int256 xInt = SD59x18.unwrap(x);
    if (xInt < 0) {
        revert CastingErrors.PRBMath_SD59x18_IntoUint40_Underflow(x);
    }
    if (xInt > int256(uint256(MAX_UINT40))) {
        revert CastingErrors.PRBMath_SD59x18_IntoUint40_Overflow(x);
    }
    result = uint40(uint256(xInt));
}

/// @notice Alias for {wrap}.
function sd(int256 x) pure returns (SD59x18 result) {
    result = SD59x18.wrap(x);
}

/// @notice Alias for {wrap}.
function sd59x18(int256 x) pure returns (SD59x18 result) {
    result = SD59x18.wrap(x);
}

/// @notice Unwraps an SD59x18 number into int256.
function unwrap(SD59x18 x) pure returns (int256 result) {
    result = SD59x18.unwrap(x);
}

/// @notice Wraps an int256 number into SD59x18.
function wrap(int256 x) pure returns (SD59x18 result) {
    result = SD59x18.wrap(x);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { wrap } from "./Casting.sol";
import { SD59x18 } from "./ValueType.sol";

/// @notice Implements the checked addition operation (+) in the SD59x18 type.
function add(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    return wrap(x.unwrap() + y.unwrap());
}

/// @notice Implements the AND (&) bitwise operation in the SD59x18 type.
function and(SD59x18 x, int256 bits) pure returns (SD59x18 result) {
    return wrap(x.unwrap() & bits);
}

/// @notice Implements the AND (&) bitwise operation in the SD59x18 type.
function and2(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    return wrap(x.unwrap() & y.unwrap());
}

/// @notice Implements the equal (=) operation in the SD59x18 type.
function eq(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() == y.unwrap();
}

/// @notice Implements the greater than operation (>) in the SD59x18 type.
function gt(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() > y.unwrap();
}

/// @notice Implements the greater than or equal to operation (>=) in the SD59x18 type.
function gte(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() >= y.unwrap();
}

/// @notice Implements a zero comparison check function in the SD59x18 type.
function isZero(SD59x18 x) pure returns (bool result) {
    result = x.unwrap() == 0;
}

/// @notice Implements the left shift operation (<<) in the SD59x18 type.
function lshift(SD59x18 x, uint256 bits) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() << bits);
}

/// @notice Implements the lower than operation (<) in the SD59x18 type.
function lt(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() < y.unwrap();
}

/// @notice Implements the lower than or equal to operation (<=) in the SD59x18 type.
function lte(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() <= y.unwrap();
}

/// @notice Implements the unchecked modulo operation (%) in the SD59x18 type.
function mod(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() % y.unwrap());
}

/// @notice Implements the not equal operation (!=) in the SD59x18 type.
function neq(SD59x18 x, SD59x18 y) pure returns (bool result) {
    result = x.unwrap() != y.unwrap();
}

/// @notice Implements the NOT (~) bitwise operation in the SD59x18 type.
function not(SD59x18 x) pure returns (SD59x18 result) {
    result = wrap(~x.unwrap());
}

/// @notice Implements the OR (|) bitwise operation in the SD59x18 type.
function or(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() | y.unwrap());
}

/// @notice Implements the right shift operation (>>) in the SD59x18 type.
function rshift(SD59x18 x, uint256 bits) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() >> bits);
}

/// @notice Implements the checked subtraction operation (-) in the SD59x18 type.
function sub(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() - y.unwrap());
}

/// @notice Implements the checked unary minus operation (-) in the SD59x18 type.
function unary(SD59x18 x) pure returns (SD59x18 result) {
    result = wrap(-x.unwrap());
}

/// @notice Implements the unchecked addition operation (+) in the SD59x18 type.
function uncheckedAdd(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    unchecked {
        result = wrap(x.unwrap() + y.unwrap());
    }
}

/// @notice Implements the unchecked subtraction operation (-) in the SD59x18 type.
function uncheckedSub(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    unchecked {
        result = wrap(x.unwrap() - y.unwrap());
    }
}

/// @notice Implements the unchecked unary minus operation (-) in the SD59x18 type.
function uncheckedUnary(SD59x18 x) pure returns (SD59x18 result) {
    unchecked {
        result = wrap(-x.unwrap());
    }
}

/// @notice Implements the XOR (^) bitwise operation in the SD59x18 type.
function xor(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() ^ y.unwrap());
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import "../Common.sol" as Common;
import "./Errors.sol" as Errors;
import {
    uEXP_MAX_INPUT,
    uEXP2_MAX_INPUT,
    uEXP_MIN_THRESHOLD,
    uEXP2_MIN_THRESHOLD,
    uHALF_UNIT,
    uLOG2_10,
    uLOG2_E,
    uMAX_SD59x18,
    uMAX_WHOLE_SD59x18,
    uMIN_SD59x18,
    uMIN_WHOLE_SD59x18,
    UNIT,
    uUNIT,
    uUNIT_SQUARED,
    ZERO
} from "./Constants.sol";
import { wrap } from "./Helpers.sol";
import { SD59x18 } from "./ValueType.sol";

/// @notice Calculates the absolute value of x.
///
/// @dev Requirements:
/// - x must be greater than `MIN_SD59x18`.
///
/// @param x The SD59x18 number for which to calculate the absolute value.
/// @param result The absolute value of x as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function abs(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt == uMIN_SD59x18) {
        revert Errors.PRBMath_SD59x18_Abs_MinSD59x18();
    }
    result = xInt < 0 ? wrap(-xInt) : x;
}

/// @notice Calculates the arithmetic average of x and y.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// @param x The first operand as an SD59x18 number.
/// @param y The second operand as an SD59x18 number.
/// @return result The arithmetic average as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function avg(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    int256 yInt = y.unwrap();

    unchecked {
        // This operation is equivalent to `x / 2 +  y / 2`, and it can never overflow.
        int256 sum = (xInt >> 1) + (yInt >> 1);

        if (sum < 0) {
            // If at least one of x and y is odd, add 1 to the result, because shifting negative numbers to the right
            // rounds toward negative infinity. The right part is equivalent to `sum + (x % 2 == 1 || y % 2 == 1)`.
            assembly ("memory-safe") {
                result := add(sum, and(or(xInt, yInt), 1))
            }
        } else {
            // Add 1 if both x and y are odd to account for the double 0.5 remainder truncated after shifting.
            result = wrap(sum + (xInt & yInt & 1));
        }
    }
}

/// @notice Yields the smallest whole number greater than or equal to x.
///
/// @dev Optimized for fractional value inputs, because every whole value has (1e18 - 1) fractional counterparts.
/// See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be less than or equal to `MAX_WHOLE_SD59x18`.
///
/// @param x The SD59x18 number to ceil.
/// @param result The smallest whole number greater than or equal to x, as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function ceil(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt > uMAX_WHOLE_SD59x18) {
        revert Errors.PRBMath_SD59x18_Ceil_Overflow(x);
    }

    int256 remainder = xInt % uUNIT;
    if (remainder == 0) {
        result = x;
    } else {
        unchecked {
            // Solidity uses C fmod style, which returns a modulus with the same sign as x.
            int256 resultInt = xInt - remainder;
            if (xInt > 0) {
                resultInt += uUNIT;
            }
            result = wrap(resultInt);
        }
    }
}

/// @notice Divides two SD59x18 numbers, returning a new SD59x18 number.
///
/// @dev This is an extension of {Common.mulDiv} for signed numbers, which works by computing the signs and the absolute
/// values separately.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv}.
/// - The result is rounded toward zero.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv}.
/// - None of the inputs can be `MIN_SD59x18`.
/// - The denominator must not be zero.
/// - The result must fit in SD59x18.
///
/// @param x The numerator as an SD59x18 number.
/// @param y The denominator as an SD59x18 number.
/// @param result The quotient as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function div(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    int256 yInt = y.unwrap();
    if (xInt == uMIN_SD59x18 || yInt == uMIN_SD59x18) {
        revert Errors.PRBMath_SD59x18_Div_InputTooSmall();
    }

    // Get hold of the absolute values of x and y.
    uint256 xAbs;
    uint256 yAbs;
    unchecked {
        xAbs = xInt < 0 ? uint256(-xInt) : uint256(xInt);
        yAbs = yInt < 0 ? uint256(-yInt) : uint256(yInt);
    }

    // Compute the absolute value (x*UNIT÷y). The resulting value must fit in SD59x18.
    uint256 resultAbs = Common.mulDiv(xAbs, uint256(uUNIT), yAbs);
    if (resultAbs > uint256(uMAX_SD59x18)) {
        revert Errors.PRBMath_SD59x18_Div_Overflow(x, y);
    }

    // Check if x and y have the same sign using two's complement representation. The left-most bit represents the sign (1 for
    // negative, 0 for positive or zero).
    bool sameSign = (xInt ^ yInt) > -1;

    // If the inputs have the same sign, the result should be positive. Otherwise, it should be negative.
    unchecked {
        result = wrap(sameSign ? int256(resultAbs) : -int256(resultAbs));
    }
}

/// @notice Calculates the natural exponent of x using the following formula:
///
/// $$
/// e^x = 2^{x * log_2{e}}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {exp2}.
///
/// Requirements:
/// - Refer to the requirements in {exp2}.
/// - x must be less than 133_084258667509499441.
///
/// @param x The exponent as an SD59x18 number.
/// @return result The result as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();

    // Any input less than the threshold returns zero.
    // This check also prevents an overflow for very small numbers.
    if (xInt < uEXP_MIN_THRESHOLD) {
        return ZERO;
    }

    // This check prevents values greater than 192e18 from being passed to {exp2}.
    if (xInt > uEXP_MAX_INPUT) {
        revert Errors.PRBMath_SD59x18_Exp_InputTooBig(x);
    }

    unchecked {
        // Inline the fixed-point multiplication to save gas.
        int256 doubleUnitProduct = xInt * uLOG2_E;
        result = exp2(wrap(doubleUnitProduct / uUNIT));
    }
}

/// @notice Calculates the binary exponent of x using the binary fraction method using the following formula:
///
/// $$
/// 2^{-x} = \frac{1}{2^x}
/// $$
///
/// @dev See https://ethereum.stackexchange.com/q/79903/24693.
///
/// Notes:
/// - If x is less than -59_794705707972522261, the result is zero.
///
/// Requirements:
/// - x must be less than 192e18.
/// - The result must fit in SD59x18.
///
/// @param x The exponent as an SD59x18 number.
/// @return result The result as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function exp2(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt < 0) {
        // The inverse of any number less than the threshold is truncated to zero.
        if (xInt < uEXP2_MIN_THRESHOLD) {
            return ZERO;
        }

        unchecked {
            // Inline the fixed-point inversion to save gas.
            result = wrap(uUNIT_SQUARED / exp2(wrap(-xInt)).unwrap());
        }
    } else {
        // Numbers greater than or equal to 192e18 don't fit in the 192.64-bit format.
        if (xInt > uEXP2_MAX_INPUT) {
            revert Errors.PRBMath_SD59x18_Exp2_InputTooBig(x);
        }

        unchecked {
            // Convert x to the 192.64-bit fixed-point format.
            uint256 x_192x64 = uint256((xInt << 64) / uUNIT);

            // It is safe to cast the result to int256 due to the checks above.
            result = wrap(int256(Common.exp2(x_192x64)));
        }
    }
}

/// @notice Yields the greatest whole number less than or equal to x.
///
/// @dev Optimized for fractional value inputs, because for every whole value there are (1e18 - 1) fractional
/// counterparts. See https://en.wikipedia.org/wiki/Floor_and_ceiling_functions.
///
/// Requirements:
/// - x must be greater than or equal to `MIN_WHOLE_SD59x18`.
///
/// @param x The SD59x18 number to floor.
/// @param result The greatest whole number less than or equal to x, as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function floor(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt < uMIN_WHOLE_SD59x18) {
        revert Errors.PRBMath_SD59x18_Floor_Underflow(x);
    }

    int256 remainder = xInt % uUNIT;
    if (remainder == 0) {
        result = x;
    } else {
        unchecked {
            // Solidity uses C fmod style, which returns a modulus with the same sign as x.
            int256 resultInt = xInt - remainder;
            if (xInt < 0) {
                resultInt -= uUNIT;
            }
            result = wrap(resultInt);
        }
    }
}

/// @notice Yields the excess beyond the floor of x for positive numbers and the part of the number to the right.
/// of the radix point for negative numbers.
/// @dev Based on the odd function definition. https://en.wikipedia.org/wiki/Fractional_part
/// @param x The SD59x18 number to get the fractional part of.
/// @param result The fractional part of x as an SD59x18 number.
function frac(SD59x18 x) pure returns (SD59x18 result) {
    result = wrap(x.unwrap() % uUNIT);
}

/// @notice Calculates the geometric mean of x and y, i.e. $\sqrt{x * y}$.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x * y must fit in SD59x18.
/// - x * y must not be negative, since complex numbers are not supported.
///
/// @param x The first operand as an SD59x18 number.
/// @param y The second operand as an SD59x18 number.
/// @return result The result as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function gm(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    int256 yInt = y.unwrap();
    if (xInt == 0 || yInt == 0) {
        return ZERO;
    }

    unchecked {
        // Equivalent to `xy / x != y`. Checking for overflow this way is faster than letting Solidity do it.
        int256 xyInt = xInt * yInt;
        if (xyInt / xInt != yInt) {
            revert Errors.PRBMath_SD59x18_Gm_Overflow(x, y);
        }

        // The product must not be negative, since complex numbers are not supported.
        if (xyInt < 0) {
            revert Errors.PRBMath_SD59x18_Gm_NegativeProduct(x, y);
        }

        // We don't need to multiply the result by `UNIT` here because the x*y product picked up a factor of `UNIT`
        // during multiplication. See the comments in {Common.sqrt}.
        uint256 resultUint = Common.sqrt(uint256(xyInt));
        result = wrap(int256(resultUint));
    }
}

/// @notice Calculates the inverse of x.
///
/// @dev Notes:
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x must not be zero.
///
/// @param x The SD59x18 number for which to calculate the inverse.
/// @return result The inverse as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function inv(SD59x18 x) pure returns (SD59x18 result) {
    result = wrap(uUNIT_SQUARED / x.unwrap());
}

/// @notice Calculates the natural logarithm of x using the following formula:
///
/// $$
/// ln{x} = log_2{x} / log_2{e}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
/// - The precision isn't sufficiently fine-grained to return exactly `UNIT` when the input is `E`.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The SD59x18 number for which to calculate the natural logarithm.
/// @return result The natural logarithm as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function ln(SD59x18 x) pure returns (SD59x18 result) {
    // Inline the fixed-point multiplication to save gas. This is overflow-safe because the maximum value that
    // {log2} can return is ~195_205294292027477728.
    result = wrap(log2(x).unwrap() * uUNIT / uLOG2_E);
}

/// @notice Calculates the common logarithm of x using the following formula:
///
/// $$
/// log_{10}{x} = log_2{x} / log_2{10}
/// $$
///
/// However, if x is an exact power of ten, a hard coded value is returned.
///
/// @dev Notes:
/// - Refer to the notes in {log2}.
///
/// Requirements:
/// - Refer to the requirements in {log2}.
///
/// @param x The SD59x18 number for which to calculate the common logarithm.
/// @return result The common logarithm as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function log10(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt < 0) {
        revert Errors.PRBMath_SD59x18_Log_InputTooSmall(x);
    }

    // Note that the `mul` in this block is the standard multiplication operation, not {SD59x18.mul}.
    // prettier-ignore
    assembly ("memory-safe") {
        switch x
        case 1 { result := mul(uUNIT, sub(0, 18)) }
        case 10 { result := mul(uUNIT, sub(1, 18)) }
        case 100 { result := mul(uUNIT, sub(2, 18)) }
        case 1000 { result := mul(uUNIT, sub(3, 18)) }
        case 10000 { result := mul(uUNIT, sub(4, 18)) }
        case 100000 { result := mul(uUNIT, sub(5, 18)) }
        case 1000000 { result := mul(uUNIT, sub(6, 18)) }
        case 10000000 { result := mul(uUNIT, sub(7, 18)) }
        case 100000000 { result := mul(uUNIT, sub(8, 18)) }
        case 1000000000 { result := mul(uUNIT, sub(9, 18)) }
        case 10000000000 { result := mul(uUNIT, sub(10, 18)) }
        case 100000000000 { result := mul(uUNIT, sub(11, 18)) }
        case 1000000000000 { result := mul(uUNIT, sub(12, 18)) }
        case 10000000000000 { result := mul(uUNIT, sub(13, 18)) }
        case 100000000000000 { result := mul(uUNIT, sub(14, 18)) }
        case 1000000000000000 { result := mul(uUNIT, sub(15, 18)) }
        case 10000000000000000 { result := mul(uUNIT, sub(16, 18)) }
        case 100000000000000000 { result := mul(uUNIT, sub(17, 18)) }
        case 1000000000000000000 { result := 0 }
        case 10000000000000000000 { result := uUNIT }
        case 100000000000000000000 { result := mul(uUNIT, 2) }
        case 1000000000000000000000 { result := mul(uUNIT, 3) }
        case 10000000000000000000000 { result := mul(uUNIT, 4) }
        case 100000000000000000000000 { result := mul(uUNIT, 5) }
        case 1000000000000000000000000 { result := mul(uUNIT, 6) }
        case 10000000000000000000000000 { result := mul(uUNIT, 7) }
        case 100000000000000000000000000 { result := mul(uUNIT, 8) }
        case 1000000000000000000000000000 { result := mul(uUNIT, 9) }
        case 10000000000000000000000000000 { result := mul(uUNIT, 10) }
        case 100000000000000000000000000000 { result := mul(uUNIT, 11) }
        case 1000000000000000000000000000000 { result := mul(uUNIT, 12) }
        case 10000000000000000000000000000000 { result := mul(uUNIT, 13) }
        case 100000000000000000000000000000000 { result := mul(uUNIT, 14) }
        case 1000000000000000000000000000000000 { result := mul(uUNIT, 15) }
        case 10000000000000000000000000000000000 { result := mul(uUNIT, 16) }
        case 100000000000000000000000000000000000 { result := mul(uUNIT, 17) }
        case 1000000000000000000000000000000000000 { result := mul(uUNIT, 18) }
        case 10000000000000000000000000000000000000 { result := mul(uUNIT, 19) }
        case 100000000000000000000000000000000000000 { result := mul(uUNIT, 20) }
        case 1000000000000000000000000000000000000000 { result := mul(uUNIT, 21) }
        case 10000000000000000000000000000000000000000 { result := mul(uUNIT, 22) }
        case 100000000000000000000000000000000000000000 { result := mul(uUNIT, 23) }
        case 1000000000000000000000000000000000000000000 { result := mul(uUNIT, 24) }
        case 10000000000000000000000000000000000000000000 { result := mul(uUNIT, 25) }
        case 100000000000000000000000000000000000000000000 { result := mul(uUNIT, 26) }
        case 1000000000000000000000000000000000000000000000 { result := mul(uUNIT, 27) }
        case 10000000000000000000000000000000000000000000000 { result := mul(uUNIT, 28) }
        case 100000000000000000000000000000000000000000000000 { result := mul(uUNIT, 29) }
        case 1000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 30) }
        case 10000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 31) }
        case 100000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 32) }
        case 1000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 33) }
        case 10000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 34) }
        case 100000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 35) }
        case 1000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 36) }
        case 10000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 37) }
        case 100000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 38) }
        case 1000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 39) }
        case 10000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 40) }
        case 100000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 41) }
        case 1000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 42) }
        case 10000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 43) }
        case 100000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 44) }
        case 1000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 45) }
        case 10000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 46) }
        case 100000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 47) }
        case 1000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 48) }
        case 10000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 49) }
        case 100000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 50) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 51) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 52) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 53) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 54) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 55) }
        case 100000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 56) }
        case 1000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 57) }
        case 10000000000000000000000000000000000000000000000000000000000000000000000000000 { result := mul(uUNIT, 58) }
        default { result := uMAX_SD59x18 }
    }

    if (result.unwrap() == uMAX_SD59x18) {
        unchecked {
            // Inline the fixed-point division to save gas.
            result = wrap(log2(x).unwrap() * uUNIT / uLOG2_10);
        }
    }
}

/// @notice Calculates the binary logarithm of x using the iterative approximation algorithm:
///
/// $$
/// log_2{x} = n + log_2{y}, \text{ where } y = x*2^{-n}, \ y \in [1, 2)
/// $$
///
/// For $0 \leq x \lt 1$, the input is inverted:
///
/// $$
/// log_2{x} = -log_2{\frac{1}{x}}
/// $$
///
/// @dev See https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation.
///
/// Notes:
/// - Due to the lossy precision of the iterative approximation, the results are not perfectly accurate to the last decimal.
///
/// Requirements:
/// - x must be greater than zero.
///
/// @param x The SD59x18 number for which to calculate the binary logarithm.
/// @return result The binary logarithm as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function log2(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt <= 0) {
        revert Errors.PRBMath_SD59x18_Log_InputTooSmall(x);
    }

    unchecked {
        int256 sign;
        if (xInt >= uUNIT) {
            sign = 1;
        } else {
            sign = -1;
            // Inline the fixed-point inversion to save gas.
            xInt = uUNIT_SQUARED / xInt;
        }

        // Calculate the integer part of the logarithm.
        uint256 n = Common.msb(uint256(xInt / uUNIT));

        // This is the integer part of the logarithm as an SD59x18 number. The operation can't overflow
        // because n is at most 255, `UNIT` is 1e18, and the sign is either 1 or -1.
        int256 resultInt = int256(n) * uUNIT;

        // Calculate $y = x * 2^{-n}$.
        int256 y = xInt >> n;

        // If y is the unit number, the fractional part is zero.
        if (y == uUNIT) {
            return wrap(resultInt * sign);
        }

        // Calculate the fractional part via the iterative approximation.
        // The `delta >>= 1` part is equivalent to `delta /= 2`, but shifting bits is more gas efficient.
        int256 DOUBLE_UNIT = 2e18;
        for (int256 delta = uHALF_UNIT; delta > 0; delta >>= 1) {
            y = (y * y) / uUNIT;

            // Is y^2 >= 2e18 and so in the range [2e18, 4e18)?
            if (y >= DOUBLE_UNIT) {
                // Add the 2^{-m} factor to the logarithm.
                resultInt = resultInt + delta;

                // Halve y, which corresponds to z/2 in the Wikipedia article.
                y >>= 1;
            }
        }
        resultInt *= sign;
        result = wrap(resultInt);
    }
}

/// @notice Multiplies two SD59x18 numbers together, returning a new SD59x18 number.
///
/// @dev Notes:
/// - Refer to the notes in {Common.mulDiv18}.
///
/// Requirements:
/// - Refer to the requirements in {Common.mulDiv18}.
/// - None of the inputs can be `MIN_SD59x18`.
/// - The result must fit in SD59x18.
///
/// @param x The multiplicand as an SD59x18 number.
/// @param y The multiplier as an SD59x18 number.
/// @return result The product as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function mul(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    int256 yInt = y.unwrap();
    if (xInt == uMIN_SD59x18 || yInt == uMIN_SD59x18) {
        revert Errors.PRBMath_SD59x18_Mul_InputTooSmall();
    }

    // Get hold of the absolute values of x and y.
    uint256 xAbs;
    uint256 yAbs;
    unchecked {
        xAbs = xInt < 0 ? uint256(-xInt) : uint256(xInt);
        yAbs = yInt < 0 ? uint256(-yInt) : uint256(yInt);
    }

    // Compute the absolute value (x*y÷UNIT). The resulting value must fit in SD59x18.
    uint256 resultAbs = Common.mulDiv18(xAbs, yAbs);
    if (resultAbs > uint256(uMAX_SD59x18)) {
        revert Errors.PRBMath_SD59x18_Mul_Overflow(x, y);
    }

    // Check if x and y have the same sign using two's complement representation. The left-most bit represents the sign (1 for
    // negative, 0 for positive or zero).
    bool sameSign = (xInt ^ yInt) > -1;

    // If the inputs have the same sign, the result should be positive. Otherwise, it should be negative.
    unchecked {
        result = wrap(sameSign ? int256(resultAbs) : -int256(resultAbs));
    }
}

/// @notice Raises x to the power of y using the following formula:
///
/// $$
/// x^y = 2^{log_2{x} * y}
/// $$
///
/// @dev Notes:
/// - Refer to the notes in {exp2}, {log2}, and {mul}.
/// - Returns `UNIT` for 0^0.
///
/// Requirements:
/// - Refer to the requirements in {exp2}, {log2}, and {mul}.
///
/// @param x The base as an SD59x18 number.
/// @param y Exponent to raise x to, as an SD59x18 number
/// @return result x raised to power y, as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function pow(SD59x18 x, SD59x18 y) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    int256 yInt = y.unwrap();

    // If both x and y are zero, the result is `UNIT`. If just x is zero, the result is always zero.
    if (xInt == 0) {
        return yInt == 0 ? UNIT : ZERO;
    }
    // If x is `UNIT`, the result is always `UNIT`.
    else if (xInt == uUNIT) {
        return UNIT;
    }

    // If y is zero, the result is always `UNIT`.
    if (yInt == 0) {
        return UNIT;
    }
    // If y is `UNIT`, the result is always x.
    else if (yInt == uUNIT) {
        return x;
    }

    // Calculate the result using the formula.
    result = exp2(mul(log2(x), y));
}

/// @notice Raises x (an SD59x18 number) to the power y (an unsigned basic integer) using the well-known
/// algorithm "exponentiation by squaring".
///
/// @dev See https://en.wikipedia.org/wiki/Exponentiation_by_squaring.
///
/// Notes:
/// - Refer to the notes in {Common.mulDiv18}.
/// - Returns `UNIT` for 0^0.
///
/// Requirements:
/// - Refer to the requirements in {abs} and {Common.mulDiv18}.
/// - The result must fit in SD59x18.
///
/// @param x The base as an SD59x18 number.
/// @param y The exponent as a uint256.
/// @return result The result as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function powu(SD59x18 x, uint256 y) pure returns (SD59x18 result) {
    uint256 xAbs = uint256(abs(x).unwrap());

    // Calculate the first iteration of the loop in advance.
    uint256 resultAbs = y & 1 > 0 ? xAbs : uint256(uUNIT);

    // Equivalent to `for(y /= 2; y > 0; y /= 2)`.
    uint256 yAux = y;
    for (yAux >>= 1; yAux > 0; yAux >>= 1) {
        xAbs = Common.mulDiv18(xAbs, xAbs);

        // Equivalent to `y % 2 == 1`.
        if (yAux & 1 > 0) {
            resultAbs = Common.mulDiv18(resultAbs, xAbs);
        }
    }

    // The result must fit in SD59x18.
    if (resultAbs > uint256(uMAX_SD59x18)) {
        revert Errors.PRBMath_SD59x18_Powu_Overflow(x, y);
    }

    unchecked {
        // Is the base negative and the exponent odd? If yes, the result should be negative.
        int256 resultInt = int256(resultAbs);
        bool isNegative = x.unwrap() < 0 && y & 1 == 1;
        if (isNegative) {
            resultInt = -resultInt;
        }
        result = wrap(resultInt);
    }
}

/// @notice Calculates the square root of x using the Babylonian method.
///
/// @dev See https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method.
///
/// Notes:
/// - Only the positive root is returned.
/// - The result is rounded toward zero.
///
/// Requirements:
/// - x cannot be negative, since complex numbers are not supported.
/// - x must be less than `MAX_SD59x18 / UNIT`.
///
/// @param x The SD59x18 number for which to calculate the square root.
/// @return result The result as an SD59x18 number.
/// @custom:smtchecker abstract-function-nondet
function sqrt(SD59x18 x) pure returns (SD59x18 result) {
    int256 xInt = x.unwrap();
    if (xInt < 0) {
        revert Errors.PRBMath_SD59x18_Sqrt_NegativeInput(x);
    }
    if (xInt > uMAX_SD59x18 / uUNIT) {
        revert Errors.PRBMath_SD59x18_Sqrt_Overflow(x);
    }

    unchecked {
        // Multiply x by `UNIT` to account for the factor of `UNIT` picked up when multiplying two SD59x18 numbers.
        // In this case, the two numbers are both the square root.
        uint256 resultUint = Common.sqrt(uint256(xInt * uUNIT));
        result = wrap(int256(resultUint));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../token/ERC721/IERC721.sol";

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { SD1x18 } from "./ValueType.sol";

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in UD2x18.
error PRBMath_SD1x18_ToUD2x18_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in UD60x18.
error PRBMath_SD1x18_ToUD60x18_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint128.
error PRBMath_SD1x18_ToUint128_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint256.
error PRBMath_SD1x18_ToUint256_Underflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint40.
error PRBMath_SD1x18_ToUint40_Overflow(SD1x18 x);

/// @notice Thrown when trying to cast a SD1x18 number that doesn't fit in uint40.
error PRBMath_SD1x18_ToUint40_Underflow(SD1x18 x);

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.19;

import { SD59x18 } from "./ValueType.sol";

/// @notice Thrown when taking the absolute value of `MIN_SD59x18`.
error PRBMath_SD59x18_Abs_MinSD59x18();

/// @notice Thrown when ceiling a number overflows SD59x18.
error PRBMath_SD59x18_Ceil_Overflow(SD59x18 x);

/// @notice Thrown when converting a basic integer to the fixed-point format overflows SD59x18.
error PRBMath_SD59x18_Convert_Overflow(int256 x);

/// @notice Thrown when converting a basic integer to the fixed-point format underflows SD59x18.
error PRBMath_SD59x18_Convert_Underflow(int256 x);

/// @notice Thrown when dividing two numbers and one of them is `MIN_SD59x18`.
error PRBMath_SD59x18_Div_InputTooSmall();

/// @notice Thrown when dividing two numbers and one of the intermediary unsigned results overflows SD59x18.
error PRBMath_SD59x18_Div_Overflow(SD59x18 x, SD59x18 y);

/// @notice Thrown when taking the natural exponent of a base greater than 133_084258667509499441.
error PRBMath_SD59x18_Exp_InputTooBig(SD59x18 x);

/// @notice Thrown when taking the binary exponent of a base greater than 192e18.
error PRBMath_SD59x18_Exp2_InputTooBig(SD59x18 x);

/// @notice Thrown when flooring a number underflows SD59x18.
error PRBMath_SD59x18_Floor_Underflow(SD59x18 x);

/// @notice Thrown when taking the geometric mean of two numbers and their product is negative.
error PRBMath_SD59x18_Gm_NegativeProduct(SD59x18 x, SD59x18 y);

/// @notice Thrown when taking the geometric mean of two numbers and multiplying them overflows SD59x18.
error PRBMath_SD59x18_Gm_Overflow(SD59x18 x, SD59x18 y);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in SD1x18.
error PRBMath_SD59x18_IntoSD1x18_Overflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in SD1x18.
error PRBMath_SD59x18_IntoSD1x18_Underflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in UD2x18.
error PRBMath_SD59x18_IntoUD2x18_Overflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in UD2x18.
error PRBMath_SD59x18_IntoUD2x18_Underflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in UD60x18.
error PRBMath_SD59x18_IntoUD60x18_Underflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint128.
error PRBMath_SD59x18_IntoUint128_Overflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint128.
error PRBMath_SD59x18_IntoUint128_Underflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint256.
error PRBMath_SD59x18_IntoUint256_Underflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint40.
error PRBMath_SD59x18_IntoUint40_Overflow(SD59x18 x);

/// @notice Thrown when trying to cast a UD60x18 number that doesn't fit in uint40.
error PRBMath_SD59x18_IntoUint40_Underflow(SD59x18 x);

/// @notice Thrown when taking the logarithm of a number less than or equal to zero.
error PRBMath_SD59x18_Log_InputTooSmall(SD59x18 x);

/// @notice Thrown when multiplying two numbers and one of the inputs is `MIN_SD59x18`.
error PRBMath_SD59x18_Mul_InputTooSmall();

/// @notice Thrown when multiplying two numbers and the intermediary absolute result overflows SD59x18.
error PRBMath_SD59x18_Mul_Overflow(SD59x18 x, SD59x18 y);

/// @notice Thrown when raising a number to a power and the intermediary absolute result overflows SD59x18.
error PRBMath_SD59x18_Powu_Overflow(SD59x18 x, uint256 y);

/// @notice Thrown when taking the square root of a negative number.
error PRBMath_SD59x18_Sqrt_NegativeInput(SD59x18 x);

/// @notice Thrown when the calculating the square root overflows SD59x18.
error PRBMath_SD59x18_Sqrt_Overflow(SD59x18 x);

{
  "remappings": [
    "@openzeppelin/contracts/=node_modules/@openzeppelin/contracts/",
    "@prb/math/=node_modules/@prb/math/",
    "forge-std/=node_modules/forge-std/",
    "solady/=node_modules/solady/",
    "solarray/=node_modules/solarray/",
    "@eth-optimism/=node_modules/@eth-optimism/",
    "@gnosis.pm/=node_modules/@gnosis.pm/",
    "@sphinx-labs/=node_modules/@sphinx-labs/",
    "hardhat/=node_modules/hardhat/",
    "solmate/=node_modules/solmate/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "none",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": true,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"initialAdmin","type":"address"},{"internalType":"contract ISablierV2NFTDescriptor","name":"initialNFTDescriptor","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"admin","type":"address"},{"internalType":"address","name":"caller","type":"address"}],"name":"CallerNotAdmin","type":"error"},{"inputs":[],"name":"DelegateCall","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC721IncorrectOwner","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC721InsufficientApproval","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC721InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"ERC721InvalidOperator","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"ERC721InvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC721InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC721InvalidSender","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC721NonexistentToken","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"},{"internalType":"uint256","name":"y","type":"uint256"}],"name":"PRBMath_MulDiv18_Overflow","type":"error"},{"inputs":[{"internalType":"uint256","name":"x","type":"uint256"},{"internalType":"uint256","name":"y","type":"uint256"},{"internalType":"uint256","name":"denominator","type":"uint256"}],"name":"PRBMath_MulDiv_Overflow","type":"error"},{"inputs":[{"internalType":"uint40","name":"cliffTime","type":"uint40"},{"internalType":"uint40","name":"endTime","type":"uint40"}],"name":"SablierV2LockupLinear_CliffTimeNotLessThanEndTime","type":"error"},{"inputs":[{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"uint40","name":"cliffTime","type":"uint40"}],"name":"SablierV2LockupLinear_StartTimeNotLessThanCliffTime","type":"error"},{"inputs":[{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"uint40","name":"endTime","type":"uint40"}],"name":"SablierV2LockupLinear_StartTimeNotLessThanEndTime","type":"error"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"SablierV2Lockup_AllowToHookUnsupportedInterface","type":"error"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"SablierV2Lockup_AllowToHookZeroCodeSize","type":"error"},{"inputs":[{"internalType":"UD60x18","name":"brokerFee","type":"uint256"},{"internalType":"UD60x18","name":"maxBrokerFee","type":"uint256"}],"name":"SablierV2Lockup_BrokerFeeTooHigh","type":"error"},{"inputs":[],"name":"SablierV2Lockup_DepositAmountZero","type":"error"},{"inputs":[{"internalType":"uint40","name":"blockTimestamp","type":"uint40"},{"internalType":"uint40","name":"endTime","type":"uint40"}],"name":"SablierV2Lockup_EndTimeNotInTheFuture","type":"error"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"SablierV2Lockup_InvalidHookSelector","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"SablierV2Lockup_NotTransferable","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_Null","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"},{"internalType":"uint128","name":"amount","type":"uint128"},{"internalType":"uint128","name":"withdrawableAmount","type":"uint128"}],"name":"SablierV2Lockup_Overdraw","type":"error"},{"inputs":[],"name":"SablierV2Lockup_StartTimeZero","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_StreamCanceled","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_StreamDepleted","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_StreamNotCancelable","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_StreamNotDepleted","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_StreamSettled","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"},{"internalType":"address","name":"caller","type":"address"}],"name":"SablierV2Lockup_Unauthorized","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_WithdrawAmountZero","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamIdsCount","type":"uint256"},{"internalType":"uint256","name":"amountsCount","type":"uint256"}],"name":"SablierV2Lockup_WithdrawArrayCountsNotEqual","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"SablierV2Lockup_WithdrawToZeroAddress","type":"error"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"},{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"SablierV2Lockup_WithdrawalAddressNotRecipient","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"admin","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"}],"name":"AllowToHook","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_toTokenId","type":"uint256"}],"name":"BatchMetadataUpdate","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"streamId","type":"uint256"},{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":true,"internalType":"contract IERC20","name":"asset","type":"address"},{"indexed":false,"internalType":"uint128","name":"senderAmount","type":"uint128"},{"indexed":false,"internalType":"uint128","name":"recipientAmount","type":"uint128"}],"name":"CancelLockupStream","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"streamId","type":"uint256"},{"indexed":false,"internalType":"address","name":"funder","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"components":[{"internalType":"uint128","name":"deposit","type":"uint128"},{"internalType":"uint128","name":"brokerFee","type":"uint128"}],"indexed":false,"internalType":"struct Lockup.CreateAmounts","name":"amounts","type":"tuple"},{"indexed":true,"internalType":"contract IERC20","name":"asset","type":"address"},{"indexed":false,"internalType":"bool","name":"cancelable","type":"bool"},{"indexed":false,"internalType":"bool","name":"transferable","type":"bool"},{"components":[{"internalType":"uint40","name":"start","type":"uint40"},{"internalType":"uint40","name":"cliff","type":"uint40"},{"internalType":"uint40","name":"end","type":"uint40"}],"indexed":false,"internalType":"struct LockupLinear.Timestamps","name":"timestamps","type":"tuple"},{"indexed":false,"internalType":"address","name":"broker","type":"address"}],"name":"CreateLockupLinearStream","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"MetadataUpdate","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"RenounceLockupStream","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"admin","type":"address"},{"indexed":false,"internalType":"contract ISablierV2NFTDescriptor","name":"oldNFTDescriptor","type":"address"},{"indexed":false,"internalType":"contract ISablierV2NFTDescriptor","name":"newNFTDescriptor","type":"address"}],"name":"SetNFTDescriptor","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldAdmin","type":"address"},{"indexed":true,"internalType":"address","name":"newAdmin","type":"address"}],"name":"TransferAdmin","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"streamId","type":"uint256"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"contract IERC20","name":"asset","type":"address"},{"indexed":false,"internalType":"uint128","name":"amount","type":"uint128"}],"name":"WithdrawFromLockupStream","type":"event"},{"inputs":[],"name":"MAX_BROKER_FEE","outputs":[{"internalType":"UD60x18","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"allowToHook","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"cancel","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"streamIds","type":"uint256[]"}],"name":"cancelMultiple","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint128","name":"totalAmount","type":"uint128"},{"internalType":"contract IERC20","name":"asset","type":"address"},{"internalType":"bool","name":"cancelable","type":"bool"},{"internalType":"bool","name":"transferable","type":"bool"},{"components":[{"internalType":"uint40","name":"cliff","type":"uint40"},{"internalType":"uint40","name":"total","type":"uint40"}],"internalType":"struct LockupLinear.Durations","name":"durations","type":"tuple"},{"components":[{"internalType":"address","name":"account","type":"address"},{"internalType":"UD60x18","name":"fee","type":"uint256"}],"internalType":"struct Broker","name":"broker","type":"tuple"}],"internalType":"struct LockupLinear.CreateWithDurations","name":"params","type":"tuple"}],"name":"createWithDurations","outputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint128","name":"totalAmount","type":"uint128"},{"internalType":"contract IERC20","name":"asset","type":"address"},{"internalType":"bool","name":"cancelable","type":"bool"},{"internalType":"bool","name":"transferable","type":"bool"},{"components":[{"internalType":"uint40","name":"start","type":"uint40"},{"internalType":"uint40","name":"cliff","type":"uint40"},{"internalType":"uint40","name":"end","type":"uint40"}],"internalType":"struct LockupLinear.Timestamps","name":"timestamps","type":"tuple"},{"components":[{"internalType":"address","name":"account","type":"address"},{"internalType":"UD60x18","name":"fee","type":"uint256"}],"internalType":"struct Broker","name":"broker","type":"tuple"}],"internalType":"struct LockupLinear.CreateWithTimestamps","name":"params","type":"tuple"}],"name":"createWithTimestamps","outputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getAsset","outputs":[{"internalType":"contract IERC20","name":"asset","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getCliffTime","outputs":[{"internalType":"uint40","name":"cliffTime","type":"uint40"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getDepositedAmount","outputs":[{"internalType":"uint128","name":"depositedAmount","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getEndTime","outputs":[{"internalType":"uint40","name":"endTime","type":"uint40"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getRecipient","outputs":[{"internalType":"address","name":"recipient","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getRefundedAmount","outputs":[{"internalType":"uint128","name":"refundedAmount","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getSender","outputs":[{"internalType":"address","name":"sender","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getStartTime","outputs":[{"internalType":"uint40","name":"startTime","type":"uint40"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getStream","outputs":[{"components":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"bool","name":"isCancelable","type":"bool"},{"internalType":"bool","name":"wasCanceled","type":"bool"},{"internalType":"contract IERC20","name":"asset","type":"address"},{"internalType":"uint40","name":"endTime","type":"uint40"},{"internalType":"bool","name":"isDepleted","type":"bool"},{"internalType":"bool","name":"isStream","type":"bool"},{"internalType":"bool","name":"isTransferable","type":"bool"},{"components":[{"internalType":"uint128","name":"deposited","type":"uint128"},{"internalType":"uint128","name":"withdrawn","type":"uint128"},{"internalType":"uint128","name":"refunded","type":"uint128"}],"internalType":"struct Lockup.Amounts","name":"amounts","type":"tuple"},{"internalType":"uint40","name":"cliffTime","type":"uint40"}],"internalType":"struct LockupLinear.StreamLL","name":"stream","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getTimestamps","outputs":[{"components":[{"internalType":"uint40","name":"start","type":"uint40"},{"internalType":"uint40","name":"cliff","type":"uint40"},{"internalType":"uint40","name":"end","type":"uint40"}],"internalType":"struct LockupLinear.Timestamps","name":"timestamps","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"getWithdrawnAmount","outputs":[{"internalType":"uint128","name":"withdrawnAmount","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"isAllowedToHook","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"isCancelable","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"isCold","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"isDepleted","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"isStream","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"isTransferable","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"isWarm","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nextStreamId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nftDescriptor","outputs":[{"internalType":"contract ISablierV2NFTDescriptor","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"refundableAmountOf","outputs":[{"internalType":"uint128","name":"refundableAmount","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"renounce","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISablierV2NFTDescriptor","name":"newNFTDescriptor","type":"address"}],"name":"setNFTDescriptor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"statusOf","outputs":[{"internalType":"enum Lockup.Status","name":"status","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"streamedAmountOf","outputs":[{"internalType":"uint128","name":"streamedAmount","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"uri","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"transferAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"wasCanceled","outputs":[{"internalType":"bool","name":"result","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint128","name":"amount","type":"uint128"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawMax","outputs":[{"internalType":"uint128","name":"withdrawnAmount","type":"uint128"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"},{"internalType":"address","name":"newRecipient","type":"address"}],"name":"withdrawMaxAndTransfer","outputs":[{"internalType":"uint128","name":"withdrawnAmount","type":"uint128"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"streamIds","type":"uint256[]"},{"internalType":"uint128[]","name":"amounts","type":"uint128[]"}],"name":"withdrawMultiple","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"streamId","type":"uint256"}],"name":"withdrawableAmountOf","outputs":[{"internalType":"uint128","name":"withdrawableAmount","type":"uint128"}],"stateMutability":"view","type":"function"}]

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

00000000000000000000000079fb3e81aac012c08501f41296ccc145a1e15844000000000000000000000000ae32ca14d85311a506bb852d49bbfb315466ba26

-----Decoded View---------------
Arg [0] : initialAdmin (address): 0x79Fb3e81aAc012c08501f41296CCC145a1E15844
Arg [1] : initialNFTDescriptor (address): 0xAE32Ca14d85311A506Bb852D49bbfB315466bA26

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 00000000000000000000000079fb3e81aac012c08501f41296ccc145a1e15844
Arg [1] : 000000000000000000000000ae32ca14d85311a506bb852d49bbfb315466ba26