Token

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(uint256 tokenId, uint256 salePrice)
        external
        view
        returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)

pragma solidity ^0.8.0;

import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
 *
 * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
 * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
 *
 * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
 * fee is specified in basis points by default.
 *
 * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
 * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
 * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
 *
 * _Available since v4.5._
 */
abstract contract ERC2981 is IERC2981, ERC165 {
    struct RoyaltyInfo {
        address receiver;
        uint96 royaltyFraction;
    }

    RoyaltyInfo private _defaultRoyaltyInfo;
    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @inheritdoc IERC2981
     */
    function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {
        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];

        if (royalty.receiver == address(0)) {
            royalty = _defaultRoyaltyInfo;
        }

        uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();

        return (royalty.receiver, royaltyAmount);
    }

    /**
     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
     * override.
     */
    function _feeDenominator() internal pure virtual returns (uint96) {
        return 10000;
    }

    /**
     * @dev Sets the royalty information that all ids in this contract will default to.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: invalid receiver");

        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Removes default royalty information.
     */
    function _deleteDefaultRoyalty() internal virtual {
        delete _defaultRoyaltyInfo;
    }

    /**
     * @dev Sets the royalty information for a specific token id, overriding the global default.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setTokenRoyalty(
        uint256 tokenId,
        address receiver,
        uint96 feeNumerator
    ) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: Invalid parameters");

        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Resets royalty information for the token id back to the global default.
     */
    function _resetTokenRoyalty(uint256 tokenId) internal virtual {
        delete _tokenRoyaltyInfo[tokenId];
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: address zero is not a valid owner");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Optimized and flexible operator filterer to abide to OpenSea's
/// mandatory on-chain royalty enforcement in order for new collections to
/// receive royalties.
/// For more information, see:
/// See: https://github.com/ProjectOpenSea/operator-filter-registry
abstract contract OperatorFilterer {
    /// @dev The default OpenSea operator blocklist subscription.
    address internal constant _DEFAULT_SUBSCRIPTION = 0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6;

    /// @dev The OpenSea operator filter registry.
    address internal constant _OPERATOR_FILTER_REGISTRY = 0x000000000000AAeB6D7670E522A718067333cd4E;

    /// @dev Registers the current contract to OpenSea's operator filter,
    /// and subscribe to the default OpenSea operator blocklist.
    /// Note: Will not revert nor update existing settings for repeated registration.
    function _registerForOperatorFiltering() internal virtual {
        _registerForOperatorFiltering(_DEFAULT_SUBSCRIPTION, true);
    }

    /// @dev Registers the current contract to OpenSea's operator filter.
    /// Note: Will not revert nor update existing settings for repeated registration.
    function _registerForOperatorFiltering(address subscriptionOrRegistrantToCopy, bool subscribe)
        internal
        virtual
    {
        /// @solidity memory-safe-assembly
        assembly {
            let functionSelector := 0x7d3e3dbe // `registerAndSubscribe(address,address)`.

            // Clean the upper 96 bits of `subscriptionOrRegistrantToCopy` in case they are dirty.
            subscriptionOrRegistrantToCopy := shr(96, shl(96, subscriptionOrRegistrantToCopy))

            for {} iszero(subscribe) {} {
                if iszero(subscriptionOrRegistrantToCopy) {
                    functionSelector := 0x4420e486 // `register(address)`.
                    break
                }
                functionSelector := 0xa0af2903 // `registerAndCopyEntries(address,address)`.
                break
            }
            // Store the function selector.
            mstore(0x00, shl(224, functionSelector))
            // Store the `address(this)`.
            mstore(0x04, address())
            // Store the `subscriptionOrRegistrantToCopy`.
            mstore(0x24, subscriptionOrRegistrantToCopy)
            // Register into the registry.
            if iszero(call(gas(), _OPERATOR_FILTER_REGISTRY, 0, 0x00, 0x44, 0x00, 0x04)) {
                // If the function selector has not been overwritten,
                // it is an out-of-gas error.
                if eq(shr(224, mload(0x00)), functionSelector) {
                    // To prevent gas under-estimation.
                    revert(0, 0)
                }
            }
            // Restore the part of the free memory pointer that was overwritten,
            // which is guaranteed to be zero, because of Solidity's memory size limits.
            mstore(0x24, 0)
        }
    }

    /// @dev Modifier to guard a function and revert if the caller is a blocked operator.
    modifier onlyAllowedOperator(address from) virtual {
        if (from != msg.sender) {
            if (!_isPriorityOperator(msg.sender)) {
                if (_operatorFilteringEnabled()) _revertIfBlocked(msg.sender);
            }
        }
        _;
    }

    /// @dev Modifier to guard a function from approving a blocked operator..
    modifier onlyAllowedOperatorApproval(address operator) virtual {
        if (!_isPriorityOperator(operator)) {
            if (_operatorFilteringEnabled()) _revertIfBlocked(operator);
        }
        _;
    }

    /// @dev Helper function that reverts if the `operator` is blocked by the registry.
    function _revertIfBlocked(address operator) private view {
        /// @solidity memory-safe-assembly
        assembly {
            // Store the function selector of `isOperatorAllowed(address,address)`,
            // shifted left by 6 bytes, which is enough for 8tb of memory.
            // We waste 6-3 = 3 bytes to save on 6 runtime gas (PUSH1 0x224 SHL).
            mstore(0x00, 0xc6171134001122334455)
            // Store the `address(this)`.
            mstore(0x1a, address())
            // Store the `operator`.
            mstore(0x3a, operator)

            // `isOperatorAllowed` always returns true if it does not revert.
            if iszero(staticcall(gas(), _OPERATOR_FILTER_REGISTRY, 0x16, 0x44, 0x00, 0x00)) {
                // Bubble up the revert if the staticcall reverts.
                returndatacopy(0x00, 0x00, returndatasize())
                revert(0x00, returndatasize())
            }

            // We'll skip checking if `from` is inside the blacklist.
            // Even though that can block transferring out of wrapper contracts,
            // we don't want tokens to be stuck.

            // Restore the part of the free memory pointer that was overwritten,
            // which is guaranteed to be zero, if less than 8tb of memory is used.
            mstore(0x3a, 0)
        }
    }

    /// @dev For deriving contracts to override, so that operator filtering
    /// can be turned on / off.
    /// Returns true by default.
    function _operatorFilteringEnabled() internal view virtual returns (bool) {
        return true;
    }

    /// @dev For deriving contracts to override, so that preferred marketplaces can
    /// skip operator filtering, helping users save gas.
    /// Returns false for all inputs by default.
    function _isPriorityOperator(address) internal view virtual returns (bool) {
        return false;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "erc721a/contracts/ERC721A.sol";
import "./DogTag.sol";
import "erc721a/contracts/IERC721A.sol";
import "@openzeppelin/contracts/token/common/ERC2981.sol";
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "closedsea/src/OperatorFilterer.sol";
import "hardhat/console.sol";

contract CarbonizedSoul is ERC721A, ERC2981, Ownable, ReentrancyGuard, Pausable, OperatorFilterer {
    event Minted(address indexed receiver, uint256 quantity);

    bool public operatorFilteringEnabled;

    IERC721A public genesis;
    DogTag public dogTag;
    uint256 public constant MAX_SUPPLY = 5500;

    uint16[] private stakedNftList;

    string private baseURI;
    bool private isRevealed = false;
    uint256 private mintStartTime;

    mapping(address => uint256) public burnCounts;

    constructor(
        address genesisAddress,
        address dogTagAddress,
        string memory _baseURI,
        uint256 _mintStartTime
    ) ERC721A("CarbonizedSoul", "CS") {
        _registerForOperatorFiltering();
        operatorFilteringEnabled = true;

        genesis = IERC721A(genesisAddress);
        dogTag = DogTag(dogTagAddress);
        baseURI = _baseURI;
        mintStartTime = _mintStartTime;
        _setDefaultRoyalty(msg.sender, 750);
    }

    function mint(uint256[] memory _burningTokenIdList) external whenNotPaused isNotContract {
        require(mintStartTime <= block.timestamp, "CarbonizedSoul: mint is not started");
        require(_totalMinted() + _burningTokenIdList.length <= MAX_SUPPLY, "Sold out");

        for (uint256 i = 0; i < _burningTokenIdList.length; i++) {
            genesis.transferFrom(msg.sender, address(this), _burningTokenIdList[i]);
            stakedNftList.push(uint16(_burningTokenIdList[i]));
        }
        _mint(msg.sender, _burningTokenIdList.length);
        _mintDogTag(_burningTokenIdList.length);
        emit Minted(msg.sender, _burningTokenIdList.length);
    }

    function _mintDogTag(uint256 burnCount) internal {
        uint256 previousBurnCount = burnCounts[msg.sender];
        uint256 newBurnCount = previousBurnCount + burnCount;
        burnCounts[msg.sender] = newBurnCount;

        uint256 count0 = 0;
        uint256 count1 = 0;
        uint256 count2 = 0;

        for (uint256 i = previousBurnCount + 1; i <= newBurnCount; i++) {
            uint256 remainder = i % 10;

            if (remainder == 0 && i != 0) {
                count2++;
            } else if (remainder % 5 == 0) {
                count0++;
            } else if (remainder % 7 == 0) {
                count1++;
            }
        }

        if (count0 > 0) {
            dogTag.mint(msg.sender, 0, count0, "");
        }
        if (count1 > 0) {
            dogTag.mint(msg.sender, 1, count1, "");
        }
        if (count2 > 0) {
            dogTag.mint(msg.sender, 2, count2, "");
        }
    }

    function unstake() external onlyOwner {
        for (uint256 i = 0; i < stakedNftList.length; i++) {
            genesis.transferFrom(address(this), msg.sender, stakedNftList[i]);
        }

        delete stakedNftList;
    }

    function setBaseURI(string calldata _baseURI) external onlyOwner {
        baseURI = _baseURI;
    }

    function setIsReveal(bool _isRevealed) external onlyOwner {
        isRevealed = _isRevealed;
    }

    function setMintStartTime(uint256 _mintStartTime) external onlyOwner {
        mintStartTime = _mintStartTime;
    }

    function setGenesis(address genesisAddress) external onlyOwner {
        genesis = IERC721A(genesisAddress);
    }

    function setDogtag(address dogTagAddress) external onlyOwner {
        dogTag = DogTag(dogTagAddress);
    }

    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    function tokenURI(uint256 _tokenId) public view override returns (string memory) {
        require(_exists(_tokenId), "ERC721Metadata: URI query for nonexistent token");
        if (!isRevealed) {
            return string(abi.encodePacked(baseURI, "prereveal"));
        }
        return string(abi.encodePacked(baseURI, Strings.toString(_tokenId)));
    }

    function contractURI() public view returns (string memory) {
        return string(abi.encodePacked(baseURI, "contractURI"));
    }

    function getStakedNftCount() public view returns (uint256) {
        return stakedNftList.length;
    }

    // =========================================================================
    //                           Operator filter
    // =========================================================================

    function setApprovalForAll(address operator, bool approved) public override onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    function approve(address operator, uint256 tokenId) public payable override onlyAllowedOperatorApproval(operator) {
        super.approve(operator, tokenId);
    }

    function transferFrom(address from, address to, uint256 tokenId) public payable override onlyAllowedOperator(from) {
        super.transferFrom(from, to, tokenId);
    }

    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable override onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId);
    }

    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public payable override onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId, data);
    }

    function setOperatorFilteringEnabled(bool value) public onlyOwner {
        operatorFilteringEnabled = value;
    }

    function _operatorFilteringEnabled() internal view override returns (bool) {
        return operatorFilteringEnabled;
    }

    function _isPriorityOperator(address operator) internal pure override returns (bool) {
        // OpenSea Seaport Conduit:
        // https://etherscan.io/address/0x1E0049783F008A0085193E00003D00cd54003c71
        // https://goerli.etherscan.io/address/0x1E0049783F008A0085193E00003D00cd54003c71
        return operator == address(0x1E0049783F008A0085193E00003D00cd54003c71);
    }

    // =========================================================================
    //                                 ERC2891
    // =========================================================================

    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external onlyOwner {
        _setDefaultRoyalty(receiver, feeNumerator);
    }

    // =========================================================================
    //                                  ERC165
    // =========================================================================

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A, ERC2981) returns (bool) {
        return ERC721A.supportsInterface(interfaceId) || ERC2981.supportsInterface(interfaceId);
    }

    modifier isNotContract() {
        require(msg.sender == tx.origin, "Sender is not EOA");
        _;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/token/common/ERC2981.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "closedsea/src/OperatorFilterer.sol";

contract DogTag is ERC1155, ERC2981, Ownable, OperatorFilterer {
    event Minted(address indexed receiver, uint256 tokenId, uint256 quantity);

    mapping(address => bool) public allowedMinters;
    using Strings for uint256;

    bool public operatorFilteringEnabled;
    string public baseURI = "https://d3lv6x67zfy1o4.cloudfront.net/dogtag/json/";

    constructor() ERC1155("") {
        _registerForOperatorFiltering();
        operatorFilteringEnabled = true;

        allowedMinters[msg.sender] = true;
        _setDefaultRoyalty(msg.sender, 750);
    }

    // =========================================================================
    //                              Token Logic
    // =========================================================================
    function mint(address to, uint256 tokenId, uint256 amount, bytes memory data) public {
        require(allowedMinters[msg.sender], "DogTag: only allowed minter can mint tokens");
        _mint(to, tokenId, amount, data);
        emit Minted(to, tokenId, amount);
    }

    function burn(address from, uint256 id, uint256 amount) external {
        _burn(from, id, amount);
    }

    function setAllowedMinter(address newAllowedMinter, bool status) public onlyOwner {
        allowedMinters[newAllowedMinter] = status;
    }

    function withdraw() external onlyOwner {
        (bool success, ) = msg.sender.call{value: address(this).balance}("");
        if (!success) {
            revert("Ether transfer failed");
        }
    }

    // =========================================================================
    //                              Metadata
    // =========================================================================
    function setBaseURI(string calldata _baseURI) public onlyOwner {
        baseURI = _baseURI;
    }

    function uri(uint256 _id) public view override returns (string memory) {
        return string(abi.encodePacked(baseURI, _id.toString()));
    }

    function contractURI() public view returns (string memory) {
        return string(abi.encodePacked(baseURI, "contractURI"));
    }

    // =========================================================================
    //                           Operator filter
    // =========================================================================

    function setApprovalForAll(address operator, bool approved) public override onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        uint256 amount,
        bytes memory data
    ) public override onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId, amount, data);
    }

    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public override onlyAllowedOperator(from) {
        super.safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    function setOperatorFilteringEnabled(bool value) public onlyOwner {
        operatorFilteringEnabled = value;
    }

    function _operatorFilteringEnabled() internal view override returns (bool) {
        return operatorFilteringEnabled;
    }

    function _isPriorityOperator(address operator) internal pure override returns (bool) {
        // OpenSea Seaport Conduit:
        // https://etherscan.io/address/0x1E0049783F008A0085193E00003D00cd54003c71
        // https://goerli.etherscan.io/address/0x1E0049783F008A0085193E00003D00cd54003c71
        return operator == address(0x1E0049783F008A0085193E00003D00cd54003c71);
    }

    // =========================================================================
    //                                 ERC2891
    // =========================================================================

    function setDefaultRoyalty(address receiver, uint96 feeNumerator) public onlyOwner {
        _setDefaultRoyalty(receiver, feeNumerator);
    }

    // =========================================================================
    //                                  ERC165
    // =========================================================================

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC1155, ERC2981) returns (bool) {
        return ERC1155.supportsInterface(interfaceId) || ERC2981.supportsInterface(interfaceId);
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import './IERC721A.sol';

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721Receiver {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
    struct TokenApprovalRef {
        address value;
    }

    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Mask of an entry in packed address data.
    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

    // The bit position of `numberMinted` in packed address data.
    uint256 private constant _BITPOS_NUMBER_MINTED = 64;

    // The bit position of `numberBurned` in packed address data.
    uint256 private constant _BITPOS_NUMBER_BURNED = 128;

    // The bit position of `aux` in packed address data.
    uint256 private constant _BITPOS_AUX = 192;

    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

    // The bit position of `startTimestamp` in packed ownership.
    uint256 private constant _BITPOS_START_TIMESTAMP = 160;

    // The bit mask of the `burned` bit in packed ownership.
    uint256 private constant _BITMASK_BURNED = 1 << 224;

    // The bit position of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

    // The bit mask of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

    // The bit position of `extraData` in packed ownership.
    uint256 private constant _BITPOS_EXTRA_DATA = 232;

    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

    // The maximum `quantity` that can be minted with {_mintERC2309}.
    // This limit is to prevent overflows on the address data entries.
    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
    // is required to cause an overflow, which is unrealistic.
    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // =============================================================
    //                            STORAGE
    // =============================================================

    // The next token ID to be minted.
    uint256 private _currentIndex;

    // The number of tokens burned.
    uint256 private _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned.
    // See {_packedOwnershipOf} implementation for details.
    //
    // Bits Layout:
    // - [0..159]   `addr`
    // - [160..223] `startTimestamp`
    // - [224]      `burned`
    // - [225]      `nextInitialized`
    // - [232..255] `extraData`
    mapping(uint256 => uint256) private _packedOwnerships;

    // Mapping owner address to address data.
    //
    // Bits Layout:
    // - [0..63]    `balance`
    // - [64..127]  `numberMinted`
    // - [128..191] `numberBurned`
    // - [192..255] `aux`
    mapping(address => uint256) private _packedAddressData;

    // Mapping from token ID to approved address.
    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // =============================================================
    //                          CONSTRUCTOR
    // =============================================================

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();
    }

    // =============================================================
    //                   TOKEN COUNTING OPERATIONS
    // =============================================================

    /**
     * @dev Returns the starting token ID.
     * To change the starting token ID, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view virtual returns (uint256) {
        return _currentIndex;
    }

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than `_currentIndex - _startTokenId()` times.
        unchecked {
            return _currentIndex - _burnCounter - _startTokenId();
        }
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view virtual returns (uint256) {
        // Counter underflow is impossible as `_currentIndex` does not decrement,
        // and it is initialized to `_startTokenId()`.
        unchecked {
            return _currentIndex - _startTokenId();
        }
    }

    /**
     * @dev Returns the total number of tokens burned.
     */
    function _totalBurned() internal view virtual returns (uint256) {
        return _burnCounter;
    }

    // =============================================================
    //                    ADDRESS DATA OPERATIONS
    // =============================================================

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
    }

    /**
     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal virtual {
        uint256 packed = _packedAddressData[owner];
        uint256 auxCasted;
        // Cast `aux` with assembly to avoid redundant masking.
        assembly {
            auxCasted := aux
        }
        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
        _packedAddressData[owner] = packed;
    }

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        // The interface IDs are constants representing the first 4 bytes
        // of the XOR of all function selectors in the interface.
        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
        return
            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
    }

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, it can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    // =============================================================
    //                     OWNERSHIPS OPERATIONS
    // =============================================================

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return address(uint160(_packedOwnershipOf(tokenId)));
    }

    /**
     * @dev Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around over time.
     */
    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnershipOf(tokenId));
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct at `index`.
     */
    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnerships[index]);
    }

    /**
     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
     */
    function _initializeOwnershipAt(uint256 index) internal virtual {
        if (_packedOwnerships[index] == 0) {
            _packedOwnerships[index] = _packedOwnershipOf(index);
        }
    }

    /**
     * Returns the packed ownership data of `tokenId`.
     */
    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
        uint256 curr = tokenId;

        unchecked {
            if (_startTokenId() <= curr)
                if (curr < _currentIndex) {
                    uint256 packed = _packedOwnerships[curr];
                    // If not burned.
                    if (packed & _BITMASK_BURNED == 0) {
                        // Invariant:
                        // There will always be an initialized ownership slot
                        // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
                        // before an unintialized ownership slot
                        // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
                        // Hence, `curr` will not underflow.
                        //
                        // We can directly compare the packed value.
                        // If the address is zero, packed will be zero.
                        while (packed == 0) {
                            packed = _packedOwnerships[--curr];
                        }
                        return packed;
                    }
                }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
     */
    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
        ownership.addr = address(uint160(packed));
        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
        ownership.burned = packed & _BITMASK_BURNED != 0;
        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
    }

    /**
     * @dev Packs ownership data into a single uint256.
     */
    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
        }
    }

    /**
     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
     */
    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
        // For branchless setting of the `nextInitialized` flag.
        assembly {
            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
        }
    }

    // =============================================================
    //                      APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) public payable virtual override {
        address owner = ownerOf(tokenId);

        if (_msgSenderERC721A() != owner)
            if (!isApprovedForAll(owner, _msgSenderERC721A())) {
                revert ApprovalCallerNotOwnerNorApproved();
            }

        _tokenApprovals[tokenId].value = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId].value;
    }

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _operatorApprovals[_msgSenderERC721A()][operator] = approved;
        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
    }

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted. See {_mint}.
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return
            _startTokenId() <= tokenId &&
            tokenId < _currentIndex && // If within bounds,
            _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
    }

    /**
     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
     */
    function _isSenderApprovedOrOwner(
        address approvedAddress,
        address owner,
        address msgSender
    ) private pure returns (bool result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
            msgSender := and(msgSender, _BITMASK_ADDRESS)
            // `msgSender == owner || msgSender == approvedAddress`.
            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
        }
    }

    /**
     * @dev Returns the storage slot and value for the approved address of `tokenId`.
     */
    function _getApprovedSlotAndAddress(uint256 tokenId)
        private
        view
        returns (uint256 approvedAddressSlot, address approvedAddress)
    {
        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
        assembly {
            approvedAddressSlot := tokenApproval.slot
            approvedAddress := sload(approvedAddressSlot)
        }
    }

    // =============================================================
    //                      TRANSFER OPERATIONS
    // =============================================================

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        // The nested ifs save around 20+ gas over a compound boolean condition.
        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();

        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // We can directly increment and decrement the balances.
            --_packedAddressData[from]; // Updates: `balance -= 1`.
            ++_packedAddressData[to]; // Updates: `balance += 1`.

            // Updates:
            // - `address` to the next owner.
            // - `startTimestamp` to the timestamp of transfering.
            // - `burned` to `false`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public payable virtual override {
        transferFrom(from, to, tokenId);
        if (to.code.length != 0)
            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
                revert TransferToNonERC721ReceiverImplementer();
            }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token IDs
     * are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token IDs
     * have been transferred. This includes minting.
     * And also called after one token has been burned.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * `from` - Previous owner of the given token ID.
     * `to` - Target address that will receive the token.
     * `tokenId` - Token ID to be transferred.
     * `_data` - Optional data to send along with the call.
     *
     * Returns whether the call correctly returned the expected magic value.
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
            bytes4 retval
        ) {
            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    // =============================================================
    //                        MINT OPERATIONS
    // =============================================================

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mint(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // `balance` and `numberMinted` have a maximum limit of 2**64.
        // `tokenId` has a maximum limit of 2**256.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            uint256 toMasked;
            uint256 end = startTokenId + quantity;

            // Use assembly to loop and emit the `Transfer` event for gas savings.
            // The duplicated `log4` removes an extra check and reduces stack juggling.
            // The assembly, together with the surrounding Solidity code, have been
            // delicately arranged to nudge the compiler into producing optimized opcodes.
            assembly {
                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
                toMasked := and(to, _BITMASK_ADDRESS)
                // Emit the `Transfer` event.
                log4(
                    0, // Start of data (0, since no data).
                    0, // End of data (0, since no data).
                    _TRANSFER_EVENT_SIGNATURE, // Signature.
                    0, // `address(0)`.
                    toMasked, // `to`.
                    startTokenId // `tokenId`.
                )

                // The `iszero(eq(,))` check ensures that large values of `quantity`
                // that overflows uint256 will make the loop run out of gas.
                // The compiler will optimize the `iszero` away for performance.
                for {
                    let tokenId := add(startTokenId, 1)
                } iszero(eq(tokenId, end)) {
                    tokenId := add(tokenId, 1)
                } {
                    // Emit the `Transfer` event. Similar to above.
                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
                }
            }
            if (toMasked == 0) revert MintToZeroAddress();

            _currentIndex = end;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * This function is intended for efficient minting only during contract creation.
     *
     * It emits only one {ConsecutiveTransfer} as defined in
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
     * instead of a sequence of {Transfer} event(s).
     *
     * Calling this function outside of contract creation WILL make your contract
     * non-compliant with the ERC721 standard.
     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
     * {ConsecutiveTransfer} event is only permissible during contract creation.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {ConsecutiveTransfer} event.
     */
    function _mintERC2309(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();
        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);

            _currentIndex = startTokenId + quantity;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * See {_mint}.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal virtual {
        _mint(to, quantity);

        unchecked {
            if (to.code.length != 0) {
                uint256 end = _currentIndex;
                uint256 index = end - quantity;
                do {
                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (index < end);
                // Reentrancy protection.
                if (_currentIndex != end) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal virtual {
        _safeMint(to, quantity, '');
    }

    // =============================================================
    //                        BURN OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        address from = address(uint160(prevOwnershipPacked));

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        if (approvalCheck) {
            // The nested ifs save around 20+ gas over a compound boolean condition.
            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // Updates:
            // - `balance -= 1`.
            // - `numberBurned += 1`.
            //
            // We can directly decrement the balance, and increment the number burned.
            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

            // Updates:
            // - `address` to the last owner.
            // - `startTimestamp` to the timestamp of burning.
            // - `burned` to `true`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                from,
                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            _burnCounter++;
        }
    }

    // =============================================================
    //                     EXTRA DATA OPERATIONS
    // =============================================================

    /**
     * @dev Directly sets the extra data for the ownership data `index`.
     */
    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
        uint256 packed = _packedOwnerships[index];
        if (packed == 0) revert OwnershipNotInitializedForExtraData();
        uint256 extraDataCasted;
        // Cast `extraData` with assembly to avoid redundant masking.
        assembly {
            extraDataCasted := extraData
        }
        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
        _packedOwnerships[index] = packed;
    }

    /**
     * @dev Called during each token transfer to set the 24bit `extraData` field.
     * Intended to be overridden by the cosumer contract.
     *
     * `previousExtraData` - the value of `extraData` before transfer.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _extraData(
        address from,
        address to,
        uint24 previousExtraData
    ) internal view virtual returns (uint24) {}

    /**
     * @dev Returns the next extra data for the packed ownership data.
     * The returned result is shifted into position.
     */
    function _nextExtraData(
        address from,
        address to,
        uint256 prevOwnershipPacked
    ) private view returns (uint256) {
        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
    }

    // =============================================================
    //                       OTHER OPERATIONS
    // =============================================================

    /**
     * @dev Returns the message sender (defaults to `msg.sender`).
     *
     * If you are writing GSN compatible contracts, you need to override this function.
     */
    function _msgSenderERC721A() internal view virtual returns (address) {
        return msg.sender;
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721A {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external payable;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external payable;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}

// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;

library console {
	address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);

	function _sendLogPayload(bytes memory payload) private view {
		uint256 payloadLength = payload.length;
		address consoleAddress = CONSOLE_ADDRESS;
		assembly {
			let payloadStart := add(payload, 32)
			let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
		}
	}

	function log() internal view {
		_sendLogPayload(abi.encodeWithSignature("log()"));
	}

	function logInt(int256 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(int256)", p0));
	}

	function logUint(uint256 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256)", p0));
	}

	function logString(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function logBool(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function logAddress(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function logBytes(bytes memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
	}

	function logBytes1(bytes1 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
	}

	function logBytes2(bytes2 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
	}

	function logBytes3(bytes3 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
	}

	function logBytes4(bytes4 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
	}

	function logBytes5(bytes5 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
	}

	function logBytes6(bytes6 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
	}

	function logBytes7(bytes7 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
	}

	function logBytes8(bytes8 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
	}

	function logBytes9(bytes9 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
	}

	function logBytes10(bytes10 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
	}

	function logBytes11(bytes11 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
	}

	function logBytes12(bytes12 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
	}

	function logBytes13(bytes13 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
	}

	function logBytes14(bytes14 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
	}

	function logBytes15(bytes15 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
	}

	function logBytes16(bytes16 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
	}

	function logBytes17(bytes17 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
	}

	function logBytes18(bytes18 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
	}

	function logBytes19(bytes19 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
	}

	function logBytes20(bytes20 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
	}

	function logBytes21(bytes21 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
	}

	function logBytes22(bytes22 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
	}

	function logBytes23(bytes23 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
	}

	function logBytes24(bytes24 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
	}

	function logBytes25(bytes25 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
	}

	function logBytes26(bytes26 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
	}

	function logBytes27(bytes27 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
	}

	function logBytes28(bytes28 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
	}

	function logBytes29(bytes29 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
	}

	function logBytes30(bytes30 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
	}

	function logBytes31(bytes31 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
	}

	function logBytes32(bytes32 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
	}

	function log(uint256 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256)", p0));
	}

	function log(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function log(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function log(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function log(uint256 p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256)", p0, p1));
	}

	function log(uint256 p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string)", p0, p1));
	}

	function log(uint256 p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool)", p0, p1));
	}

	function log(uint256 p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address)", p0, p1));
	}

	function log(string memory p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256)", p0, p1));
	}

	function log(string memory p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
	}

	function log(string memory p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
	}

	function log(string memory p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
	}

	function log(bool p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256)", p0, p1));
	}

	function log(bool p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
	}

	function log(bool p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
	}

	function log(bool p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
	}

	function log(address p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256)", p0, p1));
	}

	function log(address p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
	}

	function log(address p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
	}

	function log(address p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
	}

	function log(uint256 p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
	}

	function log(string memory p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256)", p0, p1, p2));
	}

	function log(string memory p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
	}

	function log(string memory p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
	}

	function log(string memory p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
	}

	function log(bool p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256)", p0, p1, p2));
	}

	function log(bool p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
	}

	function log(bool p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
	}

	function log(bool p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
	}

	function log(bool p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256)", p0, p1, p2));
	}

	function log(bool p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
	}

	function log(bool p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
	}

	function log(bool p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address)", p0, p1, p2));
	}

	function log(address p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256)", p0, p1, p2));
	}

	function log(address p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
	}

	function log(address p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
	}

	function log(address p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
	}

	function log(address p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256)", p0, p1, p2));
	}

	function log(address p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
	}

	function log(address p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
	}

	function log(address p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
	}

	function log(address p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256)", p0, p1, p2));
	}

	function log(address p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
	}

	function log(address p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
	}

	function log(address p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
	}

}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"genesisAddress","type":"address"},{"internalType":"address","name":"dogTagAddress","type":"address"},{"internalType":"string","name":"_baseURI","type":"string"},{"internalType":"uint256","name":"_mintStartTime","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ApprovalCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"ApprovalQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"BalanceQueryForZeroAddress","type":"error"},{"inputs":[],"name":"MintERC2309QuantityExceedsLimit","type":"error"},{"inputs":[],"name":"MintToZeroAddress","type":"error"},{"inputs":[],"name":"MintZeroQuantity","type":"error"},{"inputs":[],"name":"OwnerQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"OwnershipNotInitializedForExtraData","type":"error"},{"inputs":[],"name":"TransferCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"TransferFromIncorrectOwner","type":"error"},{"inputs":[],"name":"TransferToNonERC721ReceiverImplementer","type":"error"},{"inputs":[],"name":"TransferToZeroAddress","type":"error"},{"inputs":[],"name":"URIQueryForNonexistentToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toTokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"ConsecutiveTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"quantity","type":"uint256"}],"name":"Minted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"MAX_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"burnCounts","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"dogTag","outputs":[{"internalType":"contract DogTag","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"genesis","outputs":[{"internalType":"contract IERC721A","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getStakedNftCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_burningTokenIdList","type":"uint256[]"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operatorFilteringEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"},{"internalType":"uint256","name":"_salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_baseURI","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint96","name":"feeNumerator","type":"uint96"}],"name":"setDefaultRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"dogTagAddress","type":"address"}],"name":"setDogtag","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"genesisAddress","type":"address"}],"name":"setGenesis","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_isRevealed","type":"bool"}],"name":"setIsReveal","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_mintStartTime","type":"uint256"}],"name":"setMintStartTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"value","type":"bool"}],"name":"setOperatorFilteringEnabled","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unstake","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000d8a5d498ab43ed060cb6629b97a19e3e4276dd9f0000000000000000000000005a2c8b03fd51c9f09dd6e290a1979ce9a91b0f9900000000000000000000000000000000000000000000000000000000000000800000000000000000000000000000000000000000000000000000000064395c60000000000000000000000000000000000000000000000000000000000000002e68747470733a2f2f64336c76367836377a6679316f342e636c6f756466726f6e742e6e65742f63732f6a736f6e2f000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : genesisAddress (address): 0xd8a5d498ab43Ed060cb6629b97a19e3e4276dD9f
Arg [1] : dogTagAddress (address): 0x5a2c8b03Fd51c9F09dD6e290a1979Ce9A91B0F99
Arg [2] : _baseURI (string): https://d3lv6x67zfy1o4.cloudfront.net/cs/json/
Arg [3] : _mintStartTime (uint256): 1681480800

-----Encoded View---------------
7 Constructor Arguments found :
Arg [0] : 000000000000000000000000d8a5d498ab43ed060cb6629b97a19e3e4276dd9f
Arg [1] : 0000000000000000000000005a2c8b03fd51c9f09dd6e290a1979ce9a91b0f99
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000080
Arg [3] : 0000000000000000000000000000000000000000000000000000000064395c60
Arg [4] : 000000000000000000000000000000000000000000000000000000000000002e
Arg [5] : 68747470733a2f2f64336c76367836377a6679316f342e636c6f756466726f6e
Arg [6] : 742e6e65742f63732f6a736f6e2f000000000000000000000000000000000000