Token

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.20;

/**
 *           █████             ╨████████▀              ▌██████▌┌──└▌█████               █████
 *          ▐▀█████              ╫█████                  █████       ╙████▌            ▄▀█████
 *          ▀ █████▌             ╟████                   █████        █████            ⌐ █████▄
 *         ▌   █████             ╟████                   █████        █████           ▌   █████
 *        ╫     █████            ╟████                   █████       ▄████           ▌     █████
 *       ╓─     ▀█████           ╟████                   █████╥╥╥╥╥▄███             ▐      ▓█████
 *       ▌       █████▄          ╟████                   █████       ─█████         ▀       █████▄
 *      ▓         █████          ╟████                   █████         █████       ▓         █████
 *     ▄           █████         ╟████            ▓▌     █████         █████▌     ╫          └█████
 *    ╓▌           ██████        ╟████            █▌     █████         █████▀    ╓▀           ██████
 *   ╓█             █████▄       ╟████          ███▌     █████         █████    ▄█             █████▄
 * ,█████▌         ,███████     ▄██████▄     ,█████▌    ███████      █████╨   ,█████▌         ,███████
 * └└└└└└└└       └└└└└└└└└└   └└└└└└└└└└┌─┌└└└└└└└    └└└└└└└└└└──└└─        └└└└└└└─       └└└└└└└└└└
 */

import {AccessControlEnumerable} from "openzeppelin-contracts/access/AccessControlEnumerable.sol";
import {Ownable} from "openzeppelin-contracts/access/Ownable.sol";
import {ERC721AUpgradeable} from "erc721a/ERC721AUpgradeable.sol";
import {ECDSA} from "openzeppelin-contracts/utils/cryptography/ECDSA.sol";
import {Initializable} from "openzeppelin-contracts-upgradeable/proxy/utils/Initializable.sol";
import {IERC2981} from "openzeppelin-contracts/interfaces/IERC2981.sol";

import {IAlbaDelegate} from "./IAlbaDelegate.sol";
import {IPaymentSplitter} from "./IPaymentSplitter.sol";
import {CollectionConfig, SaleConfig, PaymentConfig, SaleType} from "./Types.sol";
import {AlbaCollectionPricing} from "./libraries/Pricing.sol";
import {Splitters} from "./libraries/Splitters.sol";

interface CollectionEvents {
    event SaleFinished();
    event RebateClaimed(address claimer, address recipient, uint256 amount);
    event PaymentFlushed(uint256 amount);
    event MaxSalePiecesReduced(uint256 newMax);
    event SaleConfigChanged(SaleConfig newConfig);
    event ReservesReleased();
    event AlbaEjected();
}

/**
 * @title Collection
 * @notice The Alba Collection contract.
 * @dev This contract uses `ERC721AUpgradeable`, but that is because it is deployed as a minimal proxy
 * to a base collection for implementation. This contract itself is *not* upgradeable.
 */
contract Collection is Initializable, CollectionEvents, ERC721AUpgradeable, Ownable, AccessControlEnumerable {
    bytes32 public constant ROLE_MANAGER = keccak256("ROLE_MANAGER");
    bytes32 public constant ROLE_ARTIST = keccak256("ROLE_ARTIST");

    // Differentiate signature type
    uint8 private constant SIG_TYPE_RESERVED = 0xFF;

    uint256 public constant MIN_REDUCE_BUFFER = 7 days;

    error InvalidConfiguration();
    error InvalidPayment();
    error TooManyMintsRequested();
    error InsufficientTokensRemanining();
    error SaleNotActive();
    error NoRebateAvailable();
    error UnknownToken();
    error Unauthorized();
    error InvalidRoyaltyPercentage();
    error PaymentFailed();
    error AuctionStillActive();

    IAlbaDelegate public albaDelegate;
    SaleConfig public saleConfig;
    CollectionConfig public collectionConfig;

    // Location of primary sale payment splitter.
    IPaymentSplitter public paymentSplitter;

    // Location of secondary sale payment splitter.
    IPaymentSplitter public paymentSplitterRoyalties;

    // Basis points for royalty payments.
    uint16 public royaltyBasisPoints;

    /* Mint mechanics */

    // Flag to indicate that the sale has been closed.
    // This is different to selling out or the auction ending.
    // It is only used when the sale is explcitly closed by the artist.
    bool public isSaleClosed;

    // Keeps track of the number of reserved tokens minted (keyed by message hash)
    mapping(bytes32 => uint256) private numReserveMintedFrom;
    // Tracks the total number of reserve mints to ensure we don't mint more than the max.
    // This allows us to overallocate reserves if we want to.
    uint32 public numReservedMinted;
    // Tracks the number of retained tokens minted by the artist.
    uint16 public numRetainedMinted;
    // Tracks the number of Alba pieces minted.
    uint16 public numAlbaMinted;

    /* Auction specific properties */

    // Final price used for rebates.
    uint256 public finalSalePrice;
    // Number of _potential_ 'rebate mints' i.e. mints which might be eligible for a rebate.
    uint256 private numRebateMints;
    // Purchase prices used to compute rebates.
    mapping(address => uint256[]) public mintPrices;

    // Expose a general mapping for metadata. This can be used to store arbitrary information
    // about the collection which should be preserved on-chain, such as the browser info,
    // licences, gallery details, etc. For flexibility we intentionally leave this unrestricted and
    // rely on conventions defined by Alba for the shape of this data.
    mapping(string => string) public metadata;

    // Modifiers

    modifier tokenExists(uint256 tokenId) {
        if (!_exists(tokenId)) revert UnknownToken();
        _;
    }

    // Access control modifiers

    modifier managerOrArtist() {
        if (!hasRole(ROLE_MANAGER, msg.sender) && !hasRole(ROLE_ARTIST, msg.sender)) revert Unauthorized();
        _;
    }

    modifier onlyArtist() {
        if (!hasRole(ROLE_ARTIST, msg.sender)) revert Unauthorized();
        _;
    }

    modifier onlyManager() {
        if (!hasRole(ROLE_MANAGER, msg.sender)) revert Unauthorized();
        _;
    }

    modifier onlyAlbaReceiver() {
        if (msg.sender != albaDelegate.getAlbaFeeReceiver()) revert Unauthorized();
        _;
    }

    // Auction time modifiers

    modifier mintingActive() {
        if (isSaleClosed || block.timestamp < saleConfig.startTime) revert SaleNotActive();
        _;
    }

    modifier afterAuction() {
        if (block.timestamp < saleConfig.auctionEndTime) revert AuctionStillActive();
        _;
    }

    function initialize(
        IAlbaDelegate _albaDelegate,
        CollectionConfig calldata _config,
        SaleConfig calldata _saleConfig,
        PaymentConfig calldata _paymentConfig,
        address albaManager,
        address[] calldata artists
    ) public initializerERC721A initializer {
        uint256 numArtists = artists.length;
        if (numArtists == 0) {
            revert InvalidConfiguration();
        }

        __ERC721A_init(_config.name, _config.token);
        _setupRole(DEFAULT_ADMIN_ROLE, albaManager);
        _setupRole(ROLE_MANAGER, albaManager);
        for (uint256 i = 0; i < numArtists; i++) {
            _setupRole(ROLE_ARTIST, artists[i]);
        }

        albaDelegate = _albaDelegate;
        collectionConfig = _config;
        royaltyBasisPoints = _paymentConfig.royaltyBasisPoints;

        // Ensure the config is valid before writing it (check relies on comparing old/new)
        _validateSaleConfig(_saleConfig);
        saleConfig = _saleConfig;

        (paymentSplitter, paymentSplitterRoyalties) = Splitters.setupPaymentSplitters(_paymentConfig, _albaDelegate);

        if (collectionConfig.metadataKeys.length != 0) {
            writeMetadata(collectionConfig.metadataKeys, collectionConfig.metadataValues);
        }

        // Make the artist the owner of the contract.
        // Note that this leaves in place the manager role for the Alba
        // platform to continue to manage the contract. This will let
        // Alba make changes to the contract in the future, such as replacing
        // the delegate to fix issues or change things like the way on-chain
        // HTML is built.
        // To remove Alba's managaer role, see `assumeTotalOwnership`.
        // Note: The first artist becomes the owner - we could use a multisig contract
        // but that would make UX for collabs much more difficult.
        _transferOwnership(artists[0]);
    }

    // Minting

    /**
     * @notice Mint a number of tokens to a user.
     * @param collectionId The collection ID.
     * @param user The user to mint to.
     * @param num The number of tokens to mint.
     * @param nonce The nonce to use for the signature.
     * @param signature The signature to verify.
     * @dev We use a signature to verify the mints. This gives us an opportunity to
     * prevent bots.
     */
    function mint(bytes16 collectionId, address user, uint16 num, uint32 nonce, bytes calldata signature)
        external
        payable
        mintingActive
    {
        // Max mints do not include reserved mints.
        uint256 publicMinted = _salePiecesMinted() - numReservedMinted;
        uint256 publicLimit = saleConfig.maxSalePieces - saleConfig.numReserved;
        if (publicMinted + num > publicLimit) revert InsufficientTokensRemanining();

        albaDelegate.verifyMint(collectionId, user, num, nonce, signature);

        _mintInternal({user: user, num: num, isReserve: false});
    }

    /**
     * @notice Mint a number of tokens to a user.
     * See mint function for params
     * @dev This is separate from the normal mint function as we don't want to check supply
     * limits, and no mints can happen after the end time, unlike other sales which stay open.
     * It uses the same internal function for payments, but we ensure that there can be
     * no rebate for OE mints in config, so it takes the simple path through the mint function.
     */
    function mintTimeLimited(bytes16 collectionId, address user, uint16 num, uint32 nonce, bytes calldata signature)
        external
        payable
        mintingActive
    {
        if (saleConfig.saleType != SaleType.FixedPriceTimeLimited) {
            revert InvalidConfiguration();
        }
        if (_hasAuctionFinished()) {
            revert SaleNotActive();
        }

        albaDelegate.verifyMint(collectionId, user, num, nonce, signature);

        _mintInternal({user: user, num: num, isReserve: false});
    }

    /**
     * @notice Mint reserved tokens to a user.
     * @param collectionId The collection ID.
     * @param user The user to mint to.
     * @param num The number of tokens to mint.
     * @param maxMints The maximum number of mints allowed for this user.
     * @param nonce The nonce to use for the signature.
     * @param signature The signature to verify.
     * @dev Reserves are not allowed for TimeLimited sales, but we don't explicitly need to handle them
     * here as the config shouldn't allow reserves.
     */
    function mintReserved(
        bytes16 collectionId,
        address user,
        uint16 num,
        uint16 maxMints,
        uint32 nonce,
        bytes calldata signature
    ) external payable mintingActive {
        // Ensure signature is valid
        bytes32 message = _reserveMessage(collectionId, user, maxMints, nonce);
        albaDelegate.verifyMintReserve(message, signature);

        if (num + numReserveMintedFrom[message] > maxMints) revert TooManyMintsRequested();

        if (numReservedMinted + num > saleConfig.numReserved) revert InsufficientTokensRemanining();

        if (_salePiecesMinted() + num > saleConfig.maxSalePieces) revert InsufficientTokensRemanining();

        // Record how many reserved mints have been made from this address
        numReserveMintedFrom[message] += num;
        numReservedMinted += num;

        _mintInternal({user: user, num: num, isReserve: true});
    }

    /**
     * @notice Mints tokens for the artist only.
     * @dev This does not call mintInternal because these mints are completely separate from the sale.
     * They can happen at any time, cost nothing, and are only limited by the number of tokens
     * in the configuration.
     */
    function mintRetained(uint16 num) external onlyArtist {
        if (numRetainedMinted + num > saleConfig.numRetained) revert InsufficientTokensRemanining();
        numRetainedMinted += num;
        _mint(msg.sender, num);
    }

    /**
     * @notice Mints the Alba retained piece.
     * These are special pieces for the Alba gallery, used to share and exhibit the work.
     * This can be called by Alba, even if the contract is fully owned by the artist.
     */
    function mintAlba(address to, uint16 num) external onlyAlbaReceiver {
        if (numAlbaMinted + num > saleConfig.numAlba) {
            revert TooManyMintsRequested();
        }
        numAlbaMinted += num;
        _mint(to, num);
    }

    /**
     * @dev Internal mint function.
     * This does the standard checks and records generic information about the sale.
     * It also controls the auction mechanics.
     * Callers must verify that the mint signature is valid before using this function.
     * Any extra money sent for the mints is kept by the contract, though will be returned
     * as part of the rebate if the rebate is enabled. We do this to avoid issues with
     * continuous auctions where the price may change between when the transaction is sent and
     * included in a block.
     * NOTE: It is important to understand that reserve mints can happen after the _auction_
     * has finished. This means that mints _may_ happen after the final price is set. However,
     * reserve mints cannot _set_ the final price.
     */
    function _mintInternal(address user, uint256 num, bool isReserve) private {
        uint256 price = getPrice();
        uint256 saleTotal = num * price;

        if (msg.value < saleTotal) {
            revert InvalidPayment();
        }

        // Rebate logic is complex, so we split it out into a separate function.
        if (saleConfig.hasRebate) {
            _mintInternalWithRebate(user, num, isReserve, price, saleTotal);
            return;
        }

        (bool success,) = payable(address(paymentSplitter)).call{value: msg.value}("");
        if (!success) revert PaymentFailed();

        // Do the mint
        _mint(user, num);
    }

    function _mintInternalWithRebate(address user, uint256 num, bool isReserve, uint256 price, uint256 saleTotal)
        private
    {
        // We don't want to wait for all reserves to mint to 'sell out', as they may be
        // held for a long time. However, we still treat the mints the same as public ones
        // (i.e. eligible for rebate if applicable).
        // TODO: Handle case where Last piece is reserve and sells before resting price reached?
        if (!isReserve) {
            uint256 publicMinted = _salePiecesMinted() - numReservedMinted;
            uint256 publicPieceLimit = saleConfig.maxSalePieces - saleConfig.numReserved;
            // If the final price is not already set, then set it if we've sold out
            if (finalSalePrice == 0 && publicMinted + num == publicPieceLimit) {
                finalSalePrice = price;
                emit SaleFinished();
            }
        }

        bool hasOverpaid = msg.value > saleTotal;
        uint256 overpayDelta = 0;
        if (hasOverpaid) {
            overpayDelta = msg.value - saleTotal;
        }

        // If the auction has a rebate and the resting price has not been discovered,
        // record the price paid for each mint.
        // Record that these mints are 'rebate mints' so we know how much money
        // to flush later on.
        if (finalSalePrice == 0 && price > saleConfig.finalPrice) {
            // If there's an overpayment, which can happen during auctions due to the price changing between tx submit
            // and it being included in a block, then attach that extra value to the first price for the rebate (which
            // is guaranteed to be there)
            mintPrices[user].push(price + overpayDelta);
            overpayDelta = 0;

            // Starting from index 1, push any extra prices.
            for (uint256 i = 1; i < num; i++) {
                mintPrices[user].push(price);
            }
            numRebateMints += num;
        }

        // If there's still an overpay delta, we've hit the case where there's no rebate but there was
        // an overpayment. This could happen when the auction is over and the final price is set, but
        // the user has sent more than the final price. In this case, we send the overpayment back to the user.
        if (overpayDelta > 0) {
            (bool success,) = payable(msg.sender).call{value: overpayDelta}("");
            if (!success) revert PaymentFailed();
        }

        // Send the payment on to the splitter.
        // If there is a rebate, the value will stay in the contract waiting to be claimed.
        // However, once the auction is finished, we know that the mint price is always
        // the final price, so we can send the payment on to the splitter immediately. This
        // removes the need for having the artist flush the payment more than once, and subsequently
        // we don't need to keep track of which mints are already accounted for in the flushing
        // process.
        // We send the payment directly if:
        // 1. The final price is not 0 (i.e. the sale has finished)
        // 2. The price paid is not the final price (i.e. the auction is still ongoing)
        // 3. The auction has finished - this case ensures we send value after the auction is there's no sellout.
        if (finalSalePrice != 0 || price == saleConfig.finalPrice || _hasAuctionFinished()) {
            (bool success,) = payable(address(paymentSplitter)).call{value: saleTotal}("");
            if (!success) revert PaymentFailed();
        }

        // Do the mint
        _mint(user, num);
    }

    /**
     * @notice Returns the number of reserves used by the given user.
     */
    function reservesUsed(bytes16 collectionId, address user, uint16 maxMints, uint32 nonce)
        external
        view
        returns (uint256)
    {
        bytes32 message = _reserveMessage(collectionId, user, maxMints, nonce);
        return numReserveMintedFrom[message];
    }

    /**
     * @notice Returns the message that is used for reserve mints.
     * @dev This can be used to verify signatures as well as check the number of mints used.
     * We prepend a type byte before the collectionID to ensure that we don't have any overlapping
     * signatures (without this the params may be identical to the public mint signature). This is
     * in place of the typed signature EIP which we should upgrade to ideally.
     */
    function _reserveMessage(bytes16 collectionId, address user, uint16 maxMints, uint32 nonce)
        internal
        view
        returns (bytes32)
    {
        return ECDSA.toEthSignedMessageHash(
            keccak256(abi.encodePacked(SIG_TYPE_RESERVED, collectionId, user, maxMints, nonce, block.chainid))
        );
    }

    // Auction functions

    /**
     * @notice Returns the number of pieces that have been minted in the sale.
     * This exludes the artist 'retained' mints, but does include the reserved mints.
     */
    function _salePiecesMinted() internal view returns (uint256) {
        return totalSupply() - numRetainedMinted - numAlbaMinted;
    }

    /**
     * @notice Returns true if the auction has finished.
     * Note that the auction finishing is not the same as the sale finishing.
     * The auction finishes when the price stops changing, but the sale can
     * continue after that indefinitely until stopped by the artist.
     */
    function _hasAuctionFinished() internal view returns (bool) {
        return block.timestamp >= saleConfig.auctionEndTime;
    }

    function getPrice() public view returns (uint256) {
        if (finalSalePrice != 0) {
            return finalSalePrice;
        }
        return AlbaCollectionPricing.getPrice(saleConfig);
    }

    /**
     * @notice Allows users to claim a rebate if applicable.
     * @dev Rebates are only available if the sale has a rebate, and if:
     * - The auction period has finished, or
     * - The sale has finished (sold out).
     * If the sale has finished, the rebate is calculated based on the final price paid.
     * otherwise, it's based on the final price of the auction.
     */
    function claimRebate(address payable recipient) external {
        uint256 totalRebate = getRebateAmount(msg.sender);
        if (totalRebate == 0) {
            revert NoRebateAvailable();
        }

        delete (mintPrices[msg.sender]);

        // External call, ensure rebate is marked as claimed before calling for reentrancy.
        (bool success,) = recipient.call{value: totalRebate}("");
        require(success, "Transfer failed");
        emit RebateClaimed(msg.sender, recipient, totalRebate);
    }

    /**
     * @notice Returns the amount of rebate that a user is eligible for.
     */
    function getRebateAmount(address user) public view returns (uint256) {
        // Auction not over yet and no sellout, means you can't claim yet
        // as we don't know the final price.
        if (!_hasAuctionFinished() && finalSalePrice == 0) {
            return 0;
        }

        // We reuse this storage slot to indicate that the rebate has been claimed.
        if (mintPrices[user].length == 0) {
            return 0;
        }

        uint256 restingPrice = finalSalePrice > 0 ? finalSalePrice : saleConfig.finalPrice;
        uint256 totalRebate = 0;
        for (uint256 i = 0; i < mintPrices[user].length; i++) {
            if (mintPrices[user][i] > restingPrice) {
                totalRebate += mintPrices[user][i] - restingPrice;
            }
        }
        return totalRebate;
    }

    // ERC721

    /// @notice Returns the URI for token metadata.
    function tokenURI(uint256 tokenId) public view override tokenExists(tokenId) returns (string memory) {
        return albaDelegate.tokenURI(tokenId, collectionConfig.slug);
    }

    // ERC165

    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(ERC721AUpgradeable, AccessControlEnumerable)
        returns (bool)
    {
        return ERC721AUpgradeable.supportsInterface(interfaceId)
            || AccessControlEnumerable.supportsInterface(interfaceId) || interfaceId == type(IERC2981).interfaceId;
    }

    // ERC2981 + Payments

    function royaltyInfo(uint256, uint256 salePrice) external view returns (address receiver, uint256 royaltyAmount) {
        royaltyAmount = (salePrice / 10000) * royaltyBasisPoints;
        receiver = payable(address(paymentSplitterRoyalties));
    }

    /**
     * @notice Returns the amount of payments that can be flushed to the splitter.
     * Note that this is only applicable for rebate auctions which have finished.
     */
    function flushablePayments() public view returns (uint256) {
        if (!saleConfig.hasRebate || !_hasAuctionFinished() || numRebateMints == 0) {
            return 0;
        }

        uint256 finalValue = finalSalePrice != 0 ? finalSalePrice : saleConfig.finalPrice;
        return numRebateMints * finalValue;
    }

    // 721 On-chain Extensions

    /**
     * @notice Returns the seed of a token.
     * @dev The seed is computed from the seed of the batch in which the given
     * token was minted.
     */
    function tokenSeed(uint256 tokenId) public view tokenExists(tokenId) returns (bytes32) {
        uint24 batchSeed = _ownershipOf(tokenId).extraData;
        return keccak256(abi.encodePacked(address(this), batchSeed, tokenId));
    }

    /**
     * @notice Computes a pseudorandom seed for a mint batch.
     * @dev Even though this process can be gamed in principle, it is extremly
     * difficult to do so in practise. Therefore we can still rely on this to
     * derive fair seeds.
     */
    function _computeBatchSeed(address to) private view returns (uint24) {
        return uint24(
            bytes3(keccak256(abi.encodePacked(block.timestamp, block.prevrandao, blockhash(block.number - 1), to)))
        );
    }

    /**
     * @dev sets the batch seed on mint.
     */
    function _extraData(address from, address to, uint24 previousExtraData)
        internal
        view
        virtual
        override
        returns (uint24)
    {
        // if minting, compute a batch seed
        if (from == address(0)) {
            return _computeBatchSeed(to);
        }
        // else return the current value
        return previousExtraData;
    }

    /**
     * @notice Returns the HTML to render a token.
     * @dev This includes all dependencies and the collection script to allow for rendering of the piece
     * directly in the browser, with no external dependencies.
     */
    function tokenHTML(uint256 tokenId) public view tokenExists(tokenId) returns (string memory) {
        return string(
            albaDelegate.tokenHTML(collectionConfig.uuid, tokenId, tokenSeed(tokenId), collectionConfig.dependencies)
        );
    }

    // Admin functions

    /**
     * @notice Sets the delegate for this collection.
     */
    function setDelegate(IAlbaDelegate newDelegate) external onlyManager {
        albaDelegate = newDelegate;
    }

    /**
     * @notice Sets the royalty percentage, in basis points
     */
    function setRoyalyPercentage(uint16 newRoyaltyBasisPoints) external managerOrArtist {
        if (newRoyaltyBasisPoints > 10000) {
            revert InvalidRoyaltyPercentage();
        }
        royaltyBasisPoints = newRoyaltyBasisPoints;
    }

    /**
     * @notice Validate a given sale config.
     * @dev Note that the validation here is minimal, and only checks for invariants which
     * would break the contract rather than things which are likely not desired. E.g. (1 second auctions).
     * We do this to allow for maximum flexibility with use cases in the future.
     * The Alba backend will do validation before deployment for those other cases.
     */
    function _validateSaleConfig(SaleConfig memory sc) internal view {
        // Ensure the start time is at least 'minSaleStartBuffer' in the future if it's changing.
        // Note that this also covers the initial deploy as the initial value will be 0.
        if (
            saleConfig.startTime != sc.startTime
                && sc.startTime < block.timestamp + albaDelegate.getMinSaleStartBuffer()
        ) {
            revert InvalidConfiguration();
        }

        // Validation for time limited sales.
        // They must have an end time and cannot have reserves or sale pieces.
        if (sc.saleType == SaleType.FixedPriceTimeLimited) {
            if (sc.auctionEndTime == 0 || sc.numReserved != 0 || sc.maxSalePieces != 0 || sc.hasRebate) {
                revert InvalidConfiguration();
            }
        }

        // Validation for fixed price
        if (sc.saleType == SaleType.FixedPrice) {
            if (sc.hasRebate || sc.auctionEndTime != 0) {
                revert InvalidConfiguration();
            }
            if (sc.numReserved > sc.maxSalePieces) {
                revert InvalidConfiguration();
            }
        }

        // Validation for auction config
        if (sc.saleType == SaleType.ExponentialDutchAuction) {
            if (sc.auctionEndTime <= sc.startTime) {
                revert InvalidConfiguration();
            }

            if (sc.initialPrice <= sc.finalPrice) {
                revert InvalidConfiguration();
            }

            if ((sc.auctionEndTime - sc.startTime) > 2 hours) {
                revert InvalidConfiguration();
            }

            // Can't have only reserved pieces in an auction because reserves are not used
            // to set the final price. Must use fixed price sale for this.
            if (sc.numReserved >= sc.maxSalePieces) {
                revert InvalidConfiguration();
            }
        }
    }

    /**
     * @notice Change the sale config. This can only be called at least MIN_CHANGE_BUFFER time before the
     * sale has started. This can be used to postpone the sale, change pricing etc.
     * @param newConf The new sale config.
     * @dev We only allow for changing this with ample notice so that artists cannot cause havoc by changing
     * params at the last minute. This ensures there is time for the backend to reflect the update.
     */
    function changeSaleConfig(SaleConfig calldata newConf) external managerOrArtist {
        // Ensure we are at least minDeployBuffer time before the current sale start time.
        if (block.timestamp >= saleConfig.startTime - albaDelegate.getMinSaleStartBuffer()) {
            revert InvalidConfiguration();
        }
        _validateSaleConfig(newConf);
        saleConfig = newConf;
        emit SaleConfigChanged(saleConfig);
    }

    /**
     * @notice Close the sale.
     * The auctionEndTime parameter of the config only describes when the price in
     * the auction will stop changing, but does not stop the sale from continuing.
     * This function can be called by the manager or the artist to stop the sale entirely.
     * Warning: this is permanent, and cannot be undone.
     * @dev We don't need to set the finalSalePrice here, because price will have always
     * settled at the auction end price.
     */
    function closeSale() external managerOrArtist mintingActive afterAuction {
        // Set the sale as closed.
        isSaleClosed = true;
        emit SaleFinished();
    }

    /**
     * @notice Release reserves for the sale.
     * @dev To 'release' means to effectively remove all reserves and allow all remaining
     * mints to be done via the public mint process. We don't update the maxSalePieces
     * because that value is the total, which was previously subdivided by public/reserves.
     */
    function releaseReserves() public managerOrArtist mintingActive afterAuction {
        // Already minted all the reserves, so nothing to do.
        if (numReservedMinted >= saleConfig.numReserved) {
            return;
        }
        saleConfig.numReserved = numReservedMinted;
        emit ReservesReleased();
    }

    /**
     * @notice Reduce the number of sale pieces.
     * @dev This can be used to reduce the number of sale pieces after the sale has started.
     * The number of pieces can only be reduced after the auction has been finished for at least
     * 7 days. This is to prevent manipulating the launch mechanics.
     */
    function reduceMaxSalePiecesTo(uint32 newTotal) external managerOrArtist mintingActive {
        if (block.timestamp < saleConfig.startTime + MIN_REDUCE_BUFFER) {
            revert InvalidConfiguration();
        }

        // Ensure the new total is valid. If the newTotal is exactly the same, as the current number
        // that means no more mints, so you should use closeSale instead.)
        if (newTotal <= _salePiecesMinted() || newTotal >= saleConfig.maxSalePieces) {
            revert InvalidConfiguration();
        }

        // If there are reserves remaining, we assume they are no longer wanted and we release them.
        if (saleConfig.numReserved > 0 && numReservedMinted < saleConfig.numReserved) {
            releaseReserves();
        }

        saleConfig.maxSalePieces = newTotal;
        emit MaxSalePiecesReduced(newTotal);
    }

    /**
     * @notice Allow the artist to flush the funds to the payment splitter.
     * @dev For FixedPrice sales, the payment is sent directly to the splitter on each mint.
     * For auctions, the payment is initially buffered in the contract so that rebates can be
     * claimed. We don't know the final price until a sell-out or the auction ends.
     * For simplicity we wait until the end of the auction to allow the artist to flush the funds.
     * At the end of the auction, any subsequent mints will be sent directly to the splitter as
     * we know the final price already.
     * Note that by the time the flush is called, the users may not have claimed their rebates.
     * So to ensure we don't flush too much, we need to store the number of 'rebateMints' i.e.
     * mints which have a *potential* to collect a rebate. We can't use the total number of mints
     * because some of these may have been sold at the final price, and therefore don't have a rebate,
     * and some may be free retained mints.
     */
    function flushPaymentToSplitter() public managerOrArtist {
        // Fixed price sales push to splitter on each mint.
        if (saleConfig.saleType == SaleType.FixedPrice || saleConfig.saleType == SaleType.FixedPriceTimeLimited) {
            revert InvalidConfiguration();
        }

        // For simplicity, we require that the auction has finished.
        // This ensures that either 'finalSalePrice' is set due to a sellout, OR
        // any remaining sales will be at the resting price. We therefore know that
        // futher mints are sent to the splitter directly, and we can flush based
        // on the number of (poential) 'rebate mints'.
        if (!_hasAuctionFinished()) {
            revert AuctionStillActive();
        }

        if (numRebateMints == 0) {
            revert InvalidConfiguration();
        }

        uint256 finalValue = finalSalePrice != 0 ? finalSalePrice : saleConfig.finalPrice;
        uint256 totalValue = numRebateMints * finalValue;

        // Set the pending rebates to 0, so that we can't flush twice.
        numRebateMints = 0;

        (bool success,) = payable(address(paymentSplitter)).call{value: totalValue}("");
        if (!success) revert PaymentFailed();
        emit PaymentFlushed(totalValue);
    }

    /**
     * @notice Allows artists to write arbitrary metadata for preservation.
     */
    function writeMetadata(string[] memory keys, string[] memory values) public managerOrArtist {
        if (keys.length != values.length) {
            revert InvalidConfiguration();
        }
        for (uint256 i = 0; i < keys.length; i++) {
            metadata[keys[i]] = values[i];
        }
    }

    /**
     * @notice Allow the artist to assume complete control of the contract.
     * The artist owns the contract at deployment time by default, but Alba
     * is retained as a manager to allow for simple builk management.
     * @dev We only allow this after the auction has finished to ensure that someone
     * can't lock us out of the ability to postpone/remove a sale.
     */
    function assumeTotalOwnership() external onlyOwner afterAuction {
        address currentManager = getRoleMember(ROLE_MANAGER, 0);

        // Make the artist the admin of all roles.
        _grantRole(DEFAULT_ADMIN_ROLE, msg.sender);

        // Make the artist a manager.
        _grantRole(ROLE_MANAGER, msg.sender);

        // Revoke the existing manager from roles.
        _revokeRole(ROLE_MANAGER, currentManager);
        _revokeRole(DEFAULT_ADMIN_ROLE, currentManager);
        emit AlbaEjected();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import './IERC721AUpgradeable.sol';
import {ERC721AStorage} from './ERC721AStorage.sol';
import './ERC721A__Initializable.sol';

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721ReceiverUpgradeable {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721AUpgradeable is ERC721A__Initializable, IERC721AUpgradeable {
    using ERC721AStorage for ERC721AStorage.Layout;

    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Mask of an entry in packed address data.
    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

    // The bit position of `numberMinted` in packed address data.
    uint256 private constant _BITPOS_NUMBER_MINTED = 64;

    // The bit position of `numberBurned` in packed address data.
    uint256 private constant _BITPOS_NUMBER_BURNED = 128;

    // The bit position of `aux` in packed address data.
    uint256 private constant _BITPOS_AUX = 192;

    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

    // The bit position of `startTimestamp` in packed ownership.
    uint256 private constant _BITPOS_START_TIMESTAMP = 160;

    // The bit mask of the `burned` bit in packed ownership.
    uint256 private constant _BITMASK_BURNED = 1 << 224;

    // The bit position of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

    // The bit mask of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

    // The bit position of `extraData` in packed ownership.
    uint256 private constant _BITPOS_EXTRA_DATA = 232;

    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

    // The maximum `quantity` that can be minted with {_mintERC2309}.
    // This limit is to prevent overflows on the address data entries.
    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
    // is required to cause an overflow, which is unrealistic.
    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // =============================================================
    //                          CONSTRUCTOR
    // =============================================================

    function __ERC721A_init(string memory name_, string memory symbol_) internal onlyInitializingERC721A {
        __ERC721A_init_unchained(name_, symbol_);
    }

    function __ERC721A_init_unchained(string memory name_, string memory symbol_) internal onlyInitializingERC721A {
        ERC721AStorage.layout()._name = name_;
        ERC721AStorage.layout()._symbol = symbol_;
        ERC721AStorage.layout()._currentIndex = _startTokenId();
    }

    // =============================================================
    //                   TOKEN COUNTING OPERATIONS
    // =============================================================

    /**
     * @dev Returns the starting token ID.
     * To change the starting token ID, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view virtual returns (uint256) {
        return ERC721AStorage.layout()._currentIndex;
    }

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than `_currentIndex - _startTokenId()` times.
        unchecked {
            return ERC721AStorage.layout()._currentIndex - ERC721AStorage.layout()._burnCounter - _startTokenId();
        }
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view virtual returns (uint256) {
        // Counter underflow is impossible as `_currentIndex` does not decrement,
        // and it is initialized to `_startTokenId()`.
        unchecked {
            return ERC721AStorage.layout()._currentIndex - _startTokenId();
        }
    }

    /**
     * @dev Returns the total number of tokens burned.
     */
    function _totalBurned() internal view virtual returns (uint256) {
        return ERC721AStorage.layout()._burnCounter;
    }

    // =============================================================
    //                    ADDRESS DATA OPERATIONS
    // =============================================================

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return ERC721AStorage.layout()._packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return
            (ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return
            (ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return uint64(ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_AUX);
    }

    /**
     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal virtual {
        uint256 packed = ERC721AStorage.layout()._packedAddressData[owner];
        uint256 auxCasted;
        // Cast `aux` with assembly to avoid redundant masking.
        assembly {
            auxCasted := aux
        }
        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
        ERC721AStorage.layout()._packedAddressData[owner] = packed;
    }

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        // The interface IDs are constants representing the first 4 bytes
        // of the XOR of all function selectors in the interface.
        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
        return
            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
    }

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() public view virtual override returns (string memory) {
        return ERC721AStorage.layout()._name;
    }

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() public view virtual override returns (string memory) {
        return ERC721AStorage.layout()._symbol;
    }

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, it can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    // =============================================================
    //                     OWNERSHIPS OPERATIONS
    // =============================================================

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return address(uint160(_packedOwnershipOf(tokenId)));
    }

    /**
     * @dev Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around over time.
     */
    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnershipOf(tokenId));
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct at `index`.
     */
    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(ERC721AStorage.layout()._packedOwnerships[index]);
    }

    /**
     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
     */
    function _initializeOwnershipAt(uint256 index) internal virtual {
        if (ERC721AStorage.layout()._packedOwnerships[index] == 0) {
            ERC721AStorage.layout()._packedOwnerships[index] = _packedOwnershipOf(index);
        }
    }

    /**
     * Returns the packed ownership data of `tokenId`.
     */
    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256 packed) {
        if (_startTokenId() <= tokenId) {
            packed = ERC721AStorage.layout()._packedOwnerships[tokenId];
            // If not burned.
            if (packed & _BITMASK_BURNED == 0) {
                // If the data at the starting slot does not exist, start the scan.
                if (packed == 0) {
                    if (tokenId >= ERC721AStorage.layout()._currentIndex) revert OwnerQueryForNonexistentToken();
                    // Invariant:
                    // There will always be an initialized ownership slot
                    // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
                    // before an unintialized ownership slot
                    // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
                    // Hence, `tokenId` will not underflow.
                    //
                    // We can directly compare the packed value.
                    // If the address is zero, packed will be zero.
                    for (;;) {
                        unchecked {
                            packed = ERC721AStorage.layout()._packedOwnerships[--tokenId];
                        }
                        if (packed == 0) continue;
                        return packed;
                    }
                }
                // Otherwise, the data exists and is not burned. We can skip the scan.
                // This is possible because we have already achieved the target condition.
                // This saves 2143 gas on transfers of initialized tokens.
                return packed;
            }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
     */
    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
        ownership.addr = address(uint160(packed));
        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
        ownership.burned = packed & _BITMASK_BURNED != 0;
        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
    }

    /**
     * @dev Packs ownership data into a single uint256.
     */
    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
        }
    }

    /**
     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
     */
    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
        // For branchless setting of the `nextInitialized` flag.
        assembly {
            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
        }
    }

    // =============================================================
    //                      APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account. See {ERC721A-_approve}.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     */
    function approve(address to, uint256 tokenId) public payable virtual override {
        _approve(to, tokenId, true);
    }

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return ERC721AStorage.layout()._tokenApprovals[tokenId].value;
    }

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        ERC721AStorage.layout()._operatorApprovals[_msgSenderERC721A()][operator] = approved;
        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
    }

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return ERC721AStorage.layout()._operatorApprovals[owner][operator];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted. See {_mint}.
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return
            _startTokenId() <= tokenId &&
            tokenId < ERC721AStorage.layout()._currentIndex && // If within bounds,
            ERC721AStorage.layout()._packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
    }

    /**
     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
     */
    function _isSenderApprovedOrOwner(
        address approvedAddress,
        address owner,
        address msgSender
    ) private pure returns (bool result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
            msgSender := and(msgSender, _BITMASK_ADDRESS)
            // `msgSender == owner || msgSender == approvedAddress`.
            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
        }
    }

    /**
     * @dev Returns the storage slot and value for the approved address of `tokenId`.
     */
    function _getApprovedSlotAndAddress(uint256 tokenId)
        private
        view
        returns (uint256 approvedAddressSlot, address approvedAddress)
    {
        ERC721AStorage.TokenApprovalRef storage tokenApproval = ERC721AStorage.layout()._tokenApprovals[tokenId];
        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
        assembly {
            approvedAddressSlot := tokenApproval.slot
            approvedAddress := sload(approvedAddressSlot)
        }
    }

    // =============================================================
    //                      TRANSFER OPERATIONS
    // =============================================================

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        // The nested ifs save around 20+ gas over a compound boolean condition.
        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();

        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // We can directly increment and decrement the balances.
            --ERC721AStorage.layout()._packedAddressData[from]; // Updates: `balance -= 1`.
            ++ERC721AStorage.layout()._packedAddressData[to]; // Updates: `balance += 1`.

            // Updates:
            // - `address` to the next owner.
            // - `startTimestamp` to the timestamp of transfering.
            // - `burned` to `false`.
            // - `nextInitialized` to `true`.
            ERC721AStorage.layout()._packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (ERC721AStorage.layout()._packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != ERC721AStorage.layout()._currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        ERC721AStorage.layout()._packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public payable virtual override {
        transferFrom(from, to, tokenId);
        if (to.code.length != 0)
            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
                revert TransferToNonERC721ReceiverImplementer();
            }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token IDs
     * are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token IDs
     * have been transferred. This includes minting.
     * And also called after one token has been burned.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * `from` - Previous owner of the given token ID.
     * `to` - Target address that will receive the token.
     * `tokenId` - Token ID to be transferred.
     * `_data` - Optional data to send along with the call.
     *
     * Returns whether the call correctly returned the expected magic value.
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try
            ERC721A__IERC721ReceiverUpgradeable(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data)
        returns (bytes4 retval) {
            return retval == ERC721A__IERC721ReceiverUpgradeable(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    // =============================================================
    //                        MINT OPERATIONS
    // =============================================================

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mint(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = ERC721AStorage.layout()._currentIndex;
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // `balance` and `numberMinted` have a maximum limit of 2**64.
        // `tokenId` has a maximum limit of 2**256.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            ERC721AStorage.layout()._packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            ERC721AStorage.layout()._packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            uint256 toMasked;
            uint256 end = startTokenId + quantity;

            // Use assembly to loop and emit the `Transfer` event for gas savings.
            // The duplicated `log4` removes an extra check and reduces stack juggling.
            // The assembly, together with the surrounding Solidity code, have been
            // delicately arranged to nudge the compiler into producing optimized opcodes.
            assembly {
                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
                toMasked := and(to, _BITMASK_ADDRESS)
                // Emit the `Transfer` event.
                log4(
                    0, // Start of data (0, since no data).
                    0, // End of data (0, since no data).
                    _TRANSFER_EVENT_SIGNATURE, // Signature.
                    0, // `address(0)`.
                    toMasked, // `to`.
                    startTokenId // `tokenId`.
                )

                // The `iszero(eq(,))` check ensures that large values of `quantity`
                // that overflows uint256 will make the loop run out of gas.
                // The compiler will optimize the `iszero` away for performance.
                for {
                    let tokenId := add(startTokenId, 1)
                } iszero(eq(tokenId, end)) {
                    tokenId := add(tokenId, 1)
                } {
                    // Emit the `Transfer` event. Similar to above.
                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
                }
            }
            if (toMasked == 0) revert MintToZeroAddress();

            ERC721AStorage.layout()._currentIndex = end;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * This function is intended for efficient minting only during contract creation.
     *
     * It emits only one {ConsecutiveTransfer} as defined in
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
     * instead of a sequence of {Transfer} event(s).
     *
     * Calling this function outside of contract creation WILL make your contract
     * non-compliant with the ERC721 standard.
     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
     * {ConsecutiveTransfer} event is only permissible during contract creation.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {ConsecutiveTransfer} event.
     */
    function _mintERC2309(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = ERC721AStorage.layout()._currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();
        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            ERC721AStorage.layout()._packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            ERC721AStorage.layout()._packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);

            ERC721AStorage.layout()._currentIndex = startTokenId + quantity;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * See {_mint}.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal virtual {
        _mint(to, quantity);

        unchecked {
            if (to.code.length != 0) {
                uint256 end = ERC721AStorage.layout()._currentIndex;
                uint256 index = end - quantity;
                do {
                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (index < end);
                // Reentrancy protection.
                if (ERC721AStorage.layout()._currentIndex != end) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal virtual {
        _safeMint(to, quantity, '');
    }

    // =============================================================
    //                       APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_approve(to, tokenId, false)`.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _approve(to, tokenId, false);
    }

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        bool approvalCheck
    ) internal virtual {
        address owner = ownerOf(tokenId);

        if (approvalCheck)
            if (_msgSenderERC721A() != owner)
                if (!isApprovedForAll(owner, _msgSenderERC721A())) {
                    revert ApprovalCallerNotOwnerNorApproved();
                }

        ERC721AStorage.layout()._tokenApprovals[tokenId].value = to;
        emit Approval(owner, to, tokenId);
    }

    // =============================================================
    //                        BURN OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        address from = address(uint160(prevOwnershipPacked));

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        if (approvalCheck) {
            // The nested ifs save around 20+ gas over a compound boolean condition.
            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // Updates:
            // - `balance -= 1`.
            // - `numberBurned += 1`.
            //
            // We can directly decrement the balance, and increment the number burned.
            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
            ERC721AStorage.layout()._packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

            // Updates:
            // - `address` to the last owner.
            // - `startTimestamp` to the timestamp of burning.
            // - `burned` to `true`.
            // - `nextInitialized` to `true`.
            ERC721AStorage.layout()._packedOwnerships[tokenId] = _packOwnershipData(
                from,
                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (ERC721AStorage.layout()._packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != ERC721AStorage.layout()._currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        ERC721AStorage.layout()._packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            ERC721AStorage.layout()._burnCounter++;
        }
    }

    // =============================================================
    //                     EXTRA DATA OPERATIONS
    // =============================================================

    /**
     * @dev Directly sets the extra data for the ownership data `index`.
     */
    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
        uint256 packed = ERC721AStorage.layout()._packedOwnerships[index];
        if (packed == 0) revert OwnershipNotInitializedForExtraData();
        uint256 extraDataCasted;
        // Cast `extraData` with assembly to avoid redundant masking.
        assembly {
            extraDataCasted := extraData
        }
        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
        ERC721AStorage.layout()._packedOwnerships[index] = packed;
    }

    /**
     * @dev Called during each token transfer to set the 24bit `extraData` field.
     * Intended to be overridden by the cosumer contract.
     *
     * `previousExtraData` - the value of `extraData` before transfer.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _extraData(
        address from,
        address to,
        uint24 previousExtraData
    ) internal view virtual returns (uint24) {}

    /**
     * @dev Returns the next extra data for the packed ownership data.
     * The returned result is shifted into position.
     */
    function _nextExtraData(
        address from,
        address to,
        uint256 prevOwnershipPacked
    ) private view returns (uint256) {
        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
    }

    // =============================================================
    //                       OTHER OPERATIONS
    // =============================================================

    /**
     * @dev Returns the message sender (defaults to `msg.sender`).
     *
     * If you are writing GSN compatible contracts, you need to override this function.
     */
    function _msgSenderERC721A() internal view virtual returns (address) {
        return msg.sender;
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(uint256 tokenId, uint256 salePrice)
        external
        view
        returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.13;

import {IPaymentSplitterFactory} from "ethier/factories/IPaymentSplitterFactory.sol";

interface IAlbaDelegate {
    function tokenURI(uint256 tokenId, string memory slug) external view returns (string memory);

    function verifyMintReserve(bytes32 message, bytes calldata signature) external view;

    function verifyMint(bytes16 collectionId, address user, uint16 num, uint32 nonce, bytes calldata signature)
        external
        view;

    function tokenHTML(bytes16 uuid, uint256 tokenId, bytes32 seed, bytes16[] memory deps)
        external
        view
        returns (bytes memory);

    function paymentSplitterFactory() external view returns (IPaymentSplitterFactory);

    function operatorFilterSubscription() external view returns (address);

    function getAlbaFeeReceiver() external view returns (address);

    function getMinSaleStartBuffer() external view returns (uint256);
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.13;

import {IERC20} from "openzeppelin-contracts/token/ERC20/IERC20.sol";

interface IPaymentSplitter {
    function releasable(address account) external view returns (uint256);
    function releasable(IERC20 token, address account) external view returns (uint256);

    function release(address payable account) external;
    function release(IERC20 token, address account) external;
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.13;

struct CollectionConfig {
    bytes16 uuid;
    string name;
    string token;
    string slug;
    bytes16[] dependencies;
    string[] metadataKeys;
    string[] metadataValues;
}

enum SaleType {
    FixedPrice,
    DeprecatedReserved,
    ExponentialDutchAuction,
    FixedPriceTimeLimited
}

struct SaleConfig {
    SaleType saleType; // uint8 for packing
    uint32 maxSalePieces; // Maximum number of pieces to sell (including reserves)
    uint32 numReserved; // Number of pieces to reserve for specific wallets
    uint16 numRetained; // Number of pieces to retain for the artist
    uint16 numAlba; // Number of pieces to retain for Alba
    uint40 startTime; // Sale start time
    uint40 auctionEndTime; // Sale doesn't stop here, but price decay stops. Needed for rebate if non-sellout.
    bool hasRebate; // Whether or not to give a rebate to resting price
    uint256 initialPrice; // Starting price for Dutch Auction
    uint256 finalPrice; // Ending price for Dutch Auction
}

struct PaymentConfig {
    address[] primaryPayees; // Addresses for primary payment.
    uint256[] primaryShareBasisPoints; // Share of primary sales for each address (basis points).
    address[] secondaryPayees; // Addresses for secondary payment.
    uint256[] secondaryShareBasisPoints; // Share of secondary sales for each address (basis points).
    uint16 royaltyBasisPoints; // Total royalty basis points.
}

struct StoredScript {
    string fileName;
    uint256 wrappedLength;
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.20;

import {SaleType, SaleConfig} from "../Types.sol";
import {Math} from "./Math.sol";

library AlbaCollectionPricing {
    /**
     * @notice Returns the current price of the sale.
     * @dev Wrapper for different pricing strategies based on sale type.
     */
    function getPrice(SaleConfig storage saleConfig) public view returns (uint256) {
        if (saleConfig.saleType == SaleType.FixedPrice || saleConfig.saleType == SaleType.FixedPriceTimeLimited) {
            return saleConfig.initialPrice;
        }
        if (block.timestamp <= saleConfig.startTime) {
            return saleConfig.initialPrice;
        }
        if (saleConfig.saleType == SaleType.ExponentialDutchAuction) {
            return _getPriceExponentialDA(saleConfig);
        }
        return 0;
    }

    /**
     * @notice Returns the current price of the sale using a continuous dutch auction pricing strategy.
     * @dev This works by computing the time elapsed since the start of the auction, and then interpolating
     * the price based on the initial price and the final price. The interpolation is linear.
     */
    function _getPriceExponentialDA(SaleConfig storage saleConfig) internal view returns (uint256) {
        if (block.timestamp >= saleConfig.auctionEndTime) {
            return saleConfig.finalPrice;
        }

        uint256 timeElapsed = block.timestamp - saleConfig.startTime;
        uint40 totalDuration = saleConfig.auctionEndTime - saleConfig.startTime;

        // This choice guarantees that `elapsed/tau < 5` meaning that the approximant is applicable (with rel error < 1%)
        // and that the price difference has sufficiently decayed (to <0.007) at the end of the auction.
        uint40 tau = totalDuration / 5;

        (uint256 expNumerator, uint256 expDenominator) =
            Math.expPadeApprox5(int48(int256(timeElapsed)), -int48(uint48(tau)));

        uint256 priceDifference = saleConfig.initialPrice - saleConfig.finalPrice;
        return saleConfig.finalPrice + (priceDifference * expNumerator) / expDenominator;
    }
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.20;

import {PaymentConfig} from "../Types.sol";
import {IAlbaDelegate} from "../IAlbaDelegate.sol";
import {IPaymentSplitter} from "../IPaymentSplitter.sol";

library Splitters {
    error InvalidConfiguration();

    /**
     * Setup the sales splitters.
     * @dev We expect an array of length 1 for a single user (if there's no Alba fee). This is less efficient
     * than just using the artist's address rather than a splitter, but it provides consistent UX for claiming.
     */

    function setupPaymentSplitters(PaymentConfig calldata conf, IAlbaDelegate albaDelegate)
        public
        returns (IPaymentSplitter, IPaymentSplitter)
    {
        if (conf.primaryPayees.length == 0 || conf.primaryPayees.length != conf.primaryShareBasisPoints.length) {
            revert InvalidConfiguration();
        }
        IPaymentSplitter paymentSplitter;
        IPaymentSplitter paymentSplitterRoyalties;

        address primary = albaDelegate.paymentSplitterFactory().deploy(conf.primaryPayees, conf.primaryShareBasisPoints);
        paymentSplitter = IPaymentSplitter(primary);

        // Only deploy a contract for secondary payments if there are secondary payees.
        if (conf.secondaryPayees.length > 0) {
            if (conf.secondaryPayees.length != conf.secondaryShareBasisPoints.length) {
                revert InvalidConfiguration();
            }

            address secondary =
                albaDelegate.paymentSplitterFactory().deploy(conf.secondaryPayees, conf.secondaryShareBasisPoints);
            paymentSplitterRoyalties = IPaymentSplitter(secondary);
        }

        return (paymentSplitter, paymentSplitterRoyalties);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721AUpgradeable {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external payable;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external payable;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

library ERC721AStorage {
    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
    struct TokenApprovalRef {
        address value;
    }

    struct Layout {
        // =============================================================
        //                            STORAGE
        // =============================================================

        // The next token ID to be minted.
        uint256 _currentIndex;
        // The number of tokens burned.
        uint256 _burnCounter;
        // Token name
        string _name;
        // Token symbol
        string _symbol;
        // Mapping from token ID to ownership details
        // An empty struct value does not necessarily mean the token is unowned.
        // See {_packedOwnershipOf} implementation for details.
        //
        // Bits Layout:
        // - [0..159]   `addr`
        // - [160..223] `startTimestamp`
        // - [224]      `burned`
        // - [225]      `nextInitialized`
        // - [232..255] `extraData`
        mapping(uint256 => uint256) _packedOwnerships;
        // Mapping owner address to address data.
        //
        // Bits Layout:
        // - [0..63]    `balance`
        // - [64..127]  `numberMinted`
        // - [128..191] `numberBurned`
        // - [192..255] `aux`
        mapping(address => uint256) _packedAddressData;
        // Mapping from token ID to approved address.
        mapping(uint256 => ERC721AStorage.TokenApprovalRef) _tokenApprovals;
        // Mapping from owner to operator approvals
        mapping(address => mapping(address => bool)) _operatorApprovals;
    }

    bytes32 internal constant STORAGE_SLOT = keccak256('ERC721A.contracts.storage.ERC721A');

    function layout() internal pure returns (Layout storage l) {
        bytes32 slot = STORAGE_SLOT;
        assembly {
            l.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev This is a base contract to aid in writing upgradeable diamond facet contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */

import {ERC721A__InitializableStorage} from './ERC721A__InitializableStorage.sol';

abstract contract ERC721A__Initializable {
    using ERC721A__InitializableStorage for ERC721A__InitializableStorage.Layout;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializerERC721A() {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
        // contract may have been reentered.
        require(
            ERC721A__InitializableStorage.layout()._initializing
                ? _isConstructor()
                : !ERC721A__InitializableStorage.layout()._initialized,
            'ERC721A__Initializable: contract is already initialized'
        );

        bool isTopLevelCall = !ERC721A__InitializableStorage.layout()._initializing;
        if (isTopLevelCall) {
            ERC721A__InitializableStorage.layout()._initializing = true;
            ERC721A__InitializableStorage.layout()._initialized = true;
        }

        _;

        if (isTopLevelCall) {
            ERC721A__InitializableStorage.layout()._initializing = false;
        }
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} modifier, directly or indirectly.
     */
    modifier onlyInitializingERC721A() {
        require(
            ERC721A__InitializableStorage.layout()._initializing,
            'ERC721A__Initializable: contract is not initializing'
        );
        _;
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        // extcodesize checks the size of the code stored in an address, and
        // address returns the current address. Since the code is still not
        // deployed when running a constructor, any checks on its code size will
        // yield zero, making it an effective way to detect if a contract is
        // under construction or not.
        address self = address(this);
        uint256 cs;
        assembly {
            cs := extcodesize(self)
        }
        return cs == 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;

interface IPaymentSplitterFactory {
    /// @notice Deploys a minimal contract proxy to a PaymentSplitter.
    function deploy(address[] memory payees, uint256[] memory shares)
        external
        returns (address);

    /**
    @notice Deploys a minimal contract proxy to a PaymentSplitter, at a
    deterministic address.
    @dev Use predictDeploymentAddress() with the same salt to predit the address
    before calling deployDeterministic(). See OpenZeppelin's proxy/Clones.sol
    for details and caveats, primarily that this will revert if a salt is
    reused.
     */
    function deployDeterministic(
        bytes32 salt,
        address[] memory payees,
        uint256[] memory shares
    ) external returns (address);

    /**
    @notice Returns the address at which a new PaymentSplitter will be deployed
    if using the same salt as passed to this function.
     */
    function predictDeploymentAddress(bytes32 salt)
        external
        view
        returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.20;

library Math {
    // Coefficients for the expanded Pade approximant of the exponential function exp(x/y).
    uint16 private constant EXP_PADE_5_COEFF_X0_Y5 = 30240;
    uint16 private constant EXP_PADE_5_COEFF_X1_Y4 = 15120;
    uint16 private constant EXP_PADE_5_COEFF_X2_Y3 = 3360;
    uint16 private constant EXP_PADE_5_COEFF_X3_Y2 = 420;
    uint16 private constant EXP_PADE_5_COEFF_X4_Y1 = 30;
    uint16 private constant EXP_PADE_5_COEFF_X5_Y0 = 1;

    /// @notice Expanded Pade approximant of order 5 of the exponential function `exp(x/y)`.
    /// @dev The pade approximant is given by (latex notation): `\frac{\frac{x^5}{30240 y^5}+\frac{x^4}{1008 y^4}+\frac{x^3}{72 y^3}+\frac{x^2}{9 y^2}+\frac{x}{2 y}+1}{-\frac{x^5}{30240 y^5}+\frac{x^4}{1008 y^4}-\frac{x^3}{72 y^3}+\frac{x^2}{9 y^2}-\frac{x}{2 y}+1}`
    /// @dev Both the numerator and the denominator were expanded (i.e. multiplied by `30240 y^5`) to obtain integer coefficients and avoid truncation errors in the divisions.
    /// @dev See also https://www.wolframalpha.com/input?i=PadeApproximant%5BExp%5Bx%2Fy%5D%2C+%7Bx%2C+0%2C+5%7D%5D
    /// @dev The relative accuracy is <1% for `x/y <= 5`.
    /// @dev The input types are limited to 48 bits to avoid overflow in the powers (max power `x^5` hence takes 240 bits)
    /// @param x The numerator of the exponent.
    /// @param y The denominator of the exponent.
    /// @return a The numerator of the result.
    /// @return b The denominator of the result.
    function expPadeApprox5(int48 x, int48 y) internal pure returns (uint256, uint256) {
        int256 a = 0;
        int256 b = 0;

        assembly {
            let xyPowers := exp(y, 5)
            let c := 0

            c := mul(EXP_PADE_5_COEFF_X0_Y5, xyPowers)
            a := add(a, c)
            b := add(b, c)

            xyPowers := sdiv(mul(xyPowers, x), y)
            c := mul(EXP_PADE_5_COEFF_X1_Y4, xyPowers)
            a := add(a, c)
            b := sub(b, c)

            xyPowers := sdiv(mul(xyPowers, x), y)
            c := mul(EXP_PADE_5_COEFF_X2_Y3, xyPowers)
            a := add(a, c)
            b := add(b, c)

            xyPowers := sdiv(mul(xyPowers, x), y)
            c := mul(EXP_PADE_5_COEFF_X3_Y2, xyPowers)
            a := add(a, c)
            b := sub(b, c)

            xyPowers := sdiv(mul(xyPowers, x), y)
            c := mul(EXP_PADE_5_COEFF_X4_Y1, xyPowers)
            a := add(a, c)
            b := add(b, c)

            xyPowers := sdiv(mul(xyPowers, x), y)
            c := mul(EXP_PADE_5_COEFF_X5_Y0, xyPowers)
            a := add(a, c)
            b := sub(b, c)
        }

        if (b < 0) {
            a = -a;
            b = -b;
        }

        return (uint256(a), uint256(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev This is a base storage for the  initialization function for upgradeable diamond facet contracts
 **/

library ERC721A__InitializableStorage {
    struct Layout {
        /*
         * Indicates that the contract has been initialized.
         */
        bool _initialized;
        /*
         * Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    bytes32 internal constant STORAGE_SLOT = keccak256('ERC721A.contracts.storage.initializable.facet');

    function layout() internal pure returns (Layout storage l) {
        bytes32 slot = STORAGE_SLOT;
        assembly {
            l.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

{
  "remappings": [
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "ethier/=lib/ethier/contracts/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/contracts/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "erc721a/=lib/ERC721A-Upgradeable/contracts/",
    "ethfs/=lib/ethfs/packages/contracts/src/",
    "scripty/=lib/scripty.sol/contracts/scripty/",
    "ERC721A-Upgradeable/=lib/ERC721A-Upgradeable/contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "libraries": {
    "src/libraries/Pricing.sol": {
      "AlbaCollectionPricing": "0x19bC0b68A262A0f56A812bd0cABE1466fC1Ca875"
    },
    "src/libraries/Splitters.sol": {
      "Splitters": "0xD47d5F3cb05d4fC80B8B8a828e0626bc3a02C44e"
    }
  }
}

[{"inputs":[],"name":"ApprovalCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"ApprovalQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"AuctionStillActive","type":"error"},{"inputs":[],"name":"BalanceQueryForZeroAddress","type":"error"},{"inputs":[],"name":"InsufficientTokensRemanining","type":"error"},{"inputs":[],"name":"InvalidConfiguration","type":"error"},{"inputs":[],"name":"InvalidPayment","type":"error"},{"inputs":[],"name":"InvalidRoyaltyPercentage","type":"error"},{"inputs":[],"name":"MintERC2309QuantityExceedsLimit","type":"error"},{"inputs":[],"name":"MintToZeroAddress","type":"error"},{"inputs":[],"name":"MintZeroQuantity","type":"error"},{"inputs":[],"name":"NoRebateAvailable","type":"error"},{"inputs":[],"name":"OwnerQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"OwnershipNotInitializedForExtraData","type":"error"},{"inputs":[],"name":"PaymentFailed","type":"error"},{"inputs":[],"name":"SaleNotActive","type":"error"},{"inputs":[],"name":"TooManyMintsRequested","type":"error"},{"inputs":[],"name":"TransferCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"TransferFromIncorrectOwner","type":"error"},{"inputs":[],"name":"TransferToNonERC721ReceiverImplementer","type":"error"},{"inputs":[],"name":"TransferToZeroAddress","type":"error"},{"inputs":[],"name":"URIQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"Unauthorized","type":"error"},{"inputs":[],"name":"UnknownToken","type":"error"},{"anonymous":false,"inputs":[],"name":"AlbaEjected","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toTokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"ConsecutiveTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newMax","type":"uint256"}],"name":"MaxSalePiecesReduced","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"PaymentFlushed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"claimer","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"RebateClaimed","type":"event"},{"anonymous":false,"inputs":[],"name":"ReservesReleased","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"components":[{"internalType":"enum SaleType","name":"saleType","type":"uint8"},{"internalType":"uint32","name":"maxSalePieces","type":"uint32"},{"internalType":"uint32","name":"numReserved","type":"uint32"},{"internalType":"uint16","name":"numRetained","type":"uint16"},{"internalType":"uint16","name":"numAlba","type":"uint16"},{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"uint40","name":"auctionEndTime","type":"uint40"},{"internalType":"bool","name":"hasRebate","type":"bool"},{"internalType":"uint256","name":"initialPrice","type":"uint256"},{"internalType":"uint256","name":"finalPrice","type":"uint256"}],"indexed":false,"internalType":"struct SaleConfig","name":"newConfig","type":"tuple"}],"name":"SaleConfigChanged","type":"event"},{"anonymous":false,"inputs":[],"name":"SaleFinished","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_REDUCE_BUFFER","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ROLE_ARTIST","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ROLE_MANAGER","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"albaDelegate","outputs":[{"internalType":"contract IAlbaDelegate","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"assumeTotalOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"enum SaleType","name":"saleType","type":"uint8"},{"internalType":"uint32","name":"maxSalePieces","type":"uint32"},{"internalType":"uint32","name":"numReserved","type":"uint32"},{"internalType":"uint16","name":"numRetained","type":"uint16"},{"internalType":"uint16","name":"numAlba","type":"uint16"},{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"uint40","name":"auctionEndTime","type":"uint40"},{"internalType":"bool","name":"hasRebate","type":"bool"},{"internalType":"uint256","name":"initialPrice","type":"uint256"},{"internalType":"uint256","name":"finalPrice","type":"uint256"}],"internalType":"struct SaleConfig","name":"newConf","type":"tuple"}],"name":"changeSaleConfig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"recipient","type":"address"}],"name":"claimRebate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"closeSale","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"collectionConfig","outputs":[{"internalType":"bytes16","name":"uuid","type":"bytes16"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"token","type":"string"},{"internalType":"string","name":"slug","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"finalSalePrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"flushPaymentToSplitter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"flushablePayments","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"}],"name":"getRebateAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IAlbaDelegate","name":"_albaDelegate","type":"address"},{"components":[{"internalType":"bytes16","name":"uuid","type":"bytes16"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"token","type":"string"},{"internalType":"string","name":"slug","type":"string"},{"internalType":"bytes16[]","name":"dependencies","type":"bytes16[]"},{"internalType":"string[]","name":"metadataKeys","type":"string[]"},{"internalType":"string[]","name":"metadataValues","type":"string[]"}],"internalType":"struct CollectionConfig","name":"_config","type":"tuple"},{"components":[{"internalType":"enum SaleType","name":"saleType","type":"uint8"},{"internalType":"uint32","name":"maxSalePieces","type":"uint32"},{"internalType":"uint32","name":"numReserved","type":"uint32"},{"internalType":"uint16","name":"numRetained","type":"uint16"},{"internalType":"uint16","name":"numAlba","type":"uint16"},{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"uint40","name":"auctionEndTime","type":"uint40"},{"internalType":"bool","name":"hasRebate","type":"bool"},{"internalType":"uint256","name":"initialPrice","type":"uint256"},{"internalType":"uint256","name":"finalPrice","type":"uint256"}],"internalType":"struct SaleConfig","name":"_saleConfig","type":"tuple"},{"components":[{"internalType":"address[]","name":"primaryPayees","type":"address[]"},{"internalType":"uint256[]","name":"primaryShareBasisPoints","type":"uint256[]"},{"internalType":"address[]","name":"secondaryPayees","type":"address[]"},{"internalType":"uint256[]","name":"secondaryShareBasisPoints","type":"uint256[]"},{"internalType":"uint16","name":"royaltyBasisPoints","type":"uint16"}],"internalType":"struct PaymentConfig","name":"_paymentConfig","type":"tuple"},{"internalType":"address","name":"albaManager","type":"address"},{"internalType":"address[]","name":"artists","type":"address[]"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isSaleClosed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"string","name":"","type":"string"}],"name":"metadata","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes16","name":"collectionId","type":"bytes16"},{"internalType":"address","name":"user","type":"address"},{"internalType":"uint16","name":"num","type":"uint16"},{"internalType":"uint32","name":"nonce","type":"uint32"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint16","name":"num","type":"uint16"}],"name":"mintAlba","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"mintPrices","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes16","name":"collectionId","type":"bytes16"},{"internalType":"address","name":"user","type":"address"},{"internalType":"uint16","name":"num","type":"uint16"},{"internalType":"uint16","name":"maxMints","type":"uint16"},{"internalType":"uint32","name":"nonce","type":"uint32"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"mintReserved","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint16","name":"num","type":"uint16"}],"name":"mintRetained","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes16","name":"collectionId","type":"bytes16"},{"internalType":"address","name":"user","type":"address"},{"internalType":"uint16","name":"num","type":"uint16"},{"internalType":"uint32","name":"nonce","type":"uint32"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"mintTimeLimited","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numAlbaMinted","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numReservedMinted","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numRetainedMinted","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paymentSplitter","outputs":[{"internalType":"contract IPaymentSplitter","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paymentSplitterRoyalties","outputs":[{"internalType":"contract IPaymentSplitter","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"newTotal","type":"uint32"}],"name":"reduceMaxSalePiecesTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"releaseReserves","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes16","name":"collectionId","type":"bytes16"},{"internalType":"address","name":"user","type":"address"},{"internalType":"uint16","name":"maxMints","type":"uint16"},{"internalType":"uint32","name":"nonce","type":"uint32"}],"name":"reservesUsed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"royaltyBasisPoints","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"royaltyAmount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"saleConfig","outputs":[{"internalType":"enum SaleType","name":"saleType","type":"uint8"},{"internalType":"uint32","name":"maxSalePieces","type":"uint32"},{"internalType":"uint32","name":"numReserved","type":"uint32"},{"internalType":"uint16","name":"numRetained","type":"uint16"},{"internalType":"uint16","name":"numAlba","type":"uint16"},{"internalType":"uint40","name":"startTime","type":"uint40"},{"internalType":"uint40","name":"auctionEndTime","type":"uint40"},{"internalType":"bool","name":"hasRebate","type":"bool"},{"internalType":"uint256","name":"initialPrice","type":"uint256"},{"internalType":"uint256","name":"finalPrice","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IAlbaDelegate","name":"newDelegate","type":"address"}],"name":"setDelegate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"newRoyaltyBasisPoints","type":"uint16"}],"name":"setRoyalyPercentage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenHTML","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenSeed","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string[]","name":"keys","type":"string[]"},{"internalType":"string[]","name":"values","type":"string[]"}],"name":"writeMetadata","outputs":[],"stateMutability":"nonpayable","type":"function"}]