Token

Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

Outline

   - function _delegate(address implementa ...    - function _implementation()    - function _fallback()    - function _beforeFallback()    - function _getImplementation()    - function _setImplementation(address n ...    - function _upgradeTo(address newImplem ...    - function _upgradeToAndCall(address ne ...    - function _upgradeToAndCallSecure(addr ...    - function _upgradeBeaconToAndCall(addr ...    - function _getAdmin()    - function _setAdmin(address newAdmin)    - function _changeAdmin(address newAdmi ...    - function _getBeacon()    - function _setBeacon(address newBeacon ... interface IBeacon    - function implementation() library Address    - function isContract(address account)    - function sendValue(address payable re ...    - function functionCall(address target, ...    - function functionCall(address target, ...    - function functionCallWithValue(addres ...    - function functionCallWithValue(addres ...    - function functionStaticCall(address t ...    - function functionStaticCall(address t ...    - function functionDelegateCall(address ...    - function functionDelegateCall(address ...    - function _verifyCallResult(bool succe ... library StorageSlot    - function getAddressSlot(bytes32 slot)    - function getBooleanSlot(bytes32 slot)    - function getBytes32Slot(bytes32 slot)    - function getUint256Slot(bytes32 slot)    - function _msgSender()    - function _msgData()    - function owner()    - function renounceOwnership()    - function transferOwnership(address ne ...  contract ProxyAdmin is Ownable    - function getProxyImplementation(Trans ...    - function getProxyAdmin(TransparentUpg ...    - function changeProxyAdmin(Transparent ...    - function upgrade(TransparentUpgradeab ...    - function upgradeAndCall(TransparentUp ...    - function upgradeTo(address newImpleme ...    - function upgradeToAndCall(address new ...    - function _authorizeUpgrade(address ne ...    - function _authorizeUpgrade(address ne ...    - function _beforeUpgrade(address newIm ...  contract ChildOfProxiable is Proxi ...    - function _beforeUpgrade(address newIm ...  contract ERC1967Proxy is Proxy, ER ... *    - function _implementation()  contract TransparentUpgradeablePro ...    - function admin()    - function implementation()    - function changeAdmin(address newAdmin ...    - function upgradeTo(address newImpleme ...    - function upgradeToAndCall(address new ...    - function _admin()    - function _beforeFallback()  contract AdminUpgradeabilityProxy ...

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

/**
 *Submitted for verification at Etherscan.io on 2021-11-02
*/

/**
 *Submitted for verification at Etherscan.io on 2021-07-07
*/

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
        // Copy msg.data. We take full control of memory in this inline assembly
        // block because it will not return to Solidity code. We overwrite the
        // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

        // Call the implementation.
        // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

        // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}


/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(address newImplementation, bytes memory data, bool forceCall) internal {
        address oldImplementation = _getImplementation();

        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }

        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature(
                    "upgradeTo(address)",
                    oldImplementation
                )
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _setImplementation(newImplementation);
            emit Upgraded(newImplementation);
        }
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(
            Address.isContract(newBeacon),
            "ERC1967: new beacon is not a contract"
        );
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
}

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {

    /**
     * @dev Returns the current implementation of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("implementation()")) == 0x5c60da1b
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
        require(success);
        return abi.decode(returndata, (address));
    }

    /**
     * @dev Returns the current admin of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("admin()")) == 0xf851a440
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
        require(success);
        return abi.decode(returndata, (address));
    }

    /**
     * @dev Changes the admin of `proxy` to `newAdmin`.
     *
     * Requirements:
     *
     * - This contract must be the current admin of `proxy`.
     */
    function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
        proxy.changeAdmin(newAdmin);
    }

    /**
     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
        proxy.upgradeTo(implementation);
    }

    /**
     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
     * {TransparentUpgradeableProxy-upgradeToAndCall}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgradeAndCall(TransparentUpgradeableProxy proxy, address implementation, bytes memory data) public payable virtual onlyOwner {
        proxy.upgradeToAndCall{value: msg.value}(implementation, data);
    }
}


/**
 * @dev Base contract for building openzeppelin-upgrades compatible implementations for the {ERC1967Proxy}. It includes
 * publicly available upgrade functions that are called by the plugin and by the secure upgrade mechanism to verify
 * continuation of the upgradability.
 *
 * The {_authorizeUpgrade} function MUST be overridden to include access restriction to the upgrade mechanism.
 *
 * _Available since v4.1._
 */
abstract contract UUPSUpgradeable is ERC1967Upgrade {
    function upgradeTo(address newImplementation) external virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, bytes(""), false);
    }

    function upgradeToAndCall(address newImplementation, bytes memory data) external payable virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, data, true);
    }

    function _authorizeUpgrade(address newImplementation) internal virtual;
}


abstract contract Proxiable is UUPSUpgradeable {
    function _authorizeUpgrade(address newImplementation) internal override {
        _beforeUpgrade(newImplementation);
    }

    function _beforeUpgrade(address newImplementation) internal virtual;
}

contract ChildOfProxiable is Proxiable {
    function _beforeUpgrade(address newImplementation) internal virtual override {}
}


/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}

/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(address _logic, address admin_, bytes memory _data) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _changeAdmin(admin_);
    }

    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }

    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }

    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }

    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }

    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }

    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }

    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}


// Kept for backwards compatibility with older versions of Hardhat and Truffle plugins.
contract AdminUpgradeabilityProxy is TransparentUpgradeableProxy {
    constructor(address logic, address admin, bytes memory data) payable TransparentUpgradeableProxy(logic, admin, data) {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"stateMutability":"payable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"AdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"beacon","type":"address"}],"name":"BeaconUpgraded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"stateMutability":"payable","type":"fallback"},{"stateMutability":"payable","type":"receive"}]

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

-----Decoded View---------------
Arg [0] : _logic (address): 0xaf663b7b97Ce0d0FC270aF75C7f19320989d7014
Arg [1] : _data (bytes): 0xf62d188800000000000000000000000000000000000000000000000000000000000000200000000000000000000000000000000000000000000000000000000000000036697066733a2f2f516d4e507745326f763279577a36384233396d7151503368443450714646614241465757704b5a676a416a706b702f00000000000000000000

-----Encoded View---------------
8 Constructor Arguments found :
Arg [0] : 000000000000000000000000af663b7b97ce0d0fc270af75c7f19320989d7014
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000040
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000084
Arg [3] : f62d188800000000000000000000000000000000000000000000000000000000
Arg [4] : 0000002000000000000000000000000000000000000000000000000000000000
Arg [5] : 00000036697066733a2f2f516d4e507745326f763279577a36384233396d7151
Arg [6] : 503368443450714646614241465757704b5a676a416a706b702f000000000000
Arg [7] : 0000000000000000000000000000000000000000000000000000000000000000

28347:848:0:-:0;;;;;;2951:11;:9;:11::i;:::-;28347:848;;2719:11;2355:113;2432:28;2442:17;:15;:17::i;:::-;2432:9;:28::i;:::-;2355:113::o;16774:200::-;16857:12;16889:77;16910:6;16918:4;16889:77;;;;;;;;;;;;;;;;;:20;:77::i;:::-;16882:84;16774:200;-1:-1:-1;;;16774:200:0:o;11087:422::-;11454:20;11493:8;;;11087:422::o;19878:151::-;20007:4;19982:40::o;29050:142::-;29117:12;29149:35;4025:66;4386:54;-1:-1:-1;;;;;4386:54:0;;4306:142;29149:35;29142:42;;29050:142;:::o;972:891::-;1360:14;1357:1;1354;1341:34;1570:1;1567;1551:14;1548:1;1532:14;1525:5;1512:60;1645:16;1642:1;1639;1624:38;1685:6;1754:38;;;;1826:16;1823:1;1816:27;1754:38;1773:16;1770:1;1763:27;17168:423;17279:12;11454:20;;17304:69;;;;-1:-1:-1;;;17304:69:0;;883:2:1;17304:69:0;;;865:21:1;922:2;902:18;;;895:30;961:34;941:18;;;934:62;-1:-1:-1;;;1012:18:1;;;1005:36;1058:19;;17304:69:0;;;;;;;;;17447:12;17461:23;17488:6;-1:-1:-1;;;;;17488:19:0;17508:4;17488:25;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17446:67;;;;17531:52;17549:7;17558:10;17570:12;17531:17;:52::i;:::-;17524:59;17168:423;-1:-1:-1;;;;;;17168:423:0:o;17599:742::-;17714:12;17743:7;17739:595;;;-1:-1:-1;17774:10:0;17767:17;;17739:595;17888:17;;:21;17884:439;;18151:10;18145:17;18212:15;18199:10;18195:2;18191:19;18184:44;18099:148;18294:12;18287:20;;-1:-1:-1;;;18287:20:0;;;;;;;;:::i;14:274:1:-;;181:6;175:13;197:53;243:6;238:3;231:4;223:6;219:17;197:53;:::i;:::-;266:16;;;;;151:137;-1:-1:-1;;151:137:1:o;293:383::-;;442:2;431:9;424:21;474:6;468:13;517:6;512:2;501:9;497:18;490:34;533:66;592:6;587:2;576:9;572:18;567:2;559:6;555:15;533:66;:::i;:::-;660:2;639:15;-1:-1:-1;;635:29:1;620:45;;;;667:2;616:54;;414:262;-1:-1:-1;;414:262:1:o;1088:258::-;1160:1;1170:113;1184:6;1181:1;1178:13;1170:113;;;1260:11;;;1254:18;1241:11;;;1234:39;1206:2;1199:10;1170:113;;;1301:6;1298:1;1295:13;1292:2;;;1336:1;1327:6;1322:3;1318:16;1311:27;1292:2;;1141:205;;;:::o

ipfs://9b8470f06e8a3960c912103fc2be177edaad69584ee3c7d2809ee737e79408e7