ETH Price: $3,466.94 (-0.72%)

Token

Aave Token (AAVE)
 

Overview

Max Total Supply

16,000,000 AAVE

Holders

174,289 ( 0.007%)

Market

Price

$371.13 @ 0.107048 ETH (-1.47%)

Onchain Market Cap

$5,938,080,000.00

Circulating Supply Market Cap

$5,570,769,227.00

Other Info

Token Contract (WITH 18 Decimals)

Balance
2.77536 AAVE

Value
$1,030.02 ( ~0.297098103456775 Eth) [0.0000%]
0xd023845a2CaB44A54A9caF1c9d011C2840AEbCF2
Loading...
Loading
Loading...
Loading
Loading...
Loading

OVERVIEW

Aave is an Open Source and Non-Custodial protocol to earn interest on deposits & borrow assets. It also features access to highly innovative flash loans, which let developers borrow instantly and easily; no collateral needed. With 16 different assets, 5 of which are stablecoins.

Market

Volume (24H):$780,290,322.00
Market Capitalization:$5,570,769,227.00
Circulating Supply:15,019,306.00 AAVE
Market Data Source: Coinmarketcap

# Exchange Pair Price  24H Volume % Volume
1
Binance
AAVE-USDT$372.22
0.1071282 Eth
$82,963,343.00
221,297.956 AAVE
18.2153%
2
Websea
AAVE-USDT$372.55
0.1074807 Eth
$37,352,997.00
0.000 AAVE
0.0000%
3
P2B
AAVE-USDT$371.96
0.1073133 Eth
$25,976,370.00
69,835.688 AAVE
5.7482%
4
Bitget
AAVE-USDT$372.13
0.1073720 Eth
$20,220,552.00
54,028.364 AAVE
4.4471%
5
OKX
AAVE-USDT$372.37
0.1074459 Eth
$18,033,184.00
48,203.585 AAVE
3.9677%
6
Bilaxy
AAVE-USDT$371.88
0.1072876 Eth
$16,590,678.00
44,613.319 AAVE
3.6722%
7
Coinbase Exchange
AAVE-USD$372.13
0.1073612 Eth
$15,556,436.00
41,803.767 AAVE
3.4409%
8
Balancer V2
0X7F39C581F595B53C5CB19BD0B3F8DA6C935E2CA0-0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9$371.19
0.1068390 Eth
$12,896,278.00
3,157.261 0X7F39C581F595B53C5CB19BD0B3F8DA6C935E2CA0
0.2599%
9
Bybit
AAVE-USDT$372.36
0.1074389 Eth
$12,209,924.00
32,597.040 AAVE
2.6831%
10
FMFW.io
AAVE-USDT$370.01
0.1065671 Eth
$11,201,487.00
30,273.652 AAVE
2.4919%
11
HitBTC
AAVE-USDT$372.01
0.1073270 Eth
$11,129,864.00
29,766.000 AAVE
2.4501%
12
DigiFinex
AAVE-USDT$372.22
0.1073962 Eth
$10,706,478.00
28,764.153 AAVE
2.3676%
13
BVOX
AAVE-USDT$372.47
0.1074689 Eth
$10,610,918.00
28,429.040 AAVE
2.3400%
14
CoinW
AAVE-USDT$371.81
0.1070754 Eth
$9,746,430.00
26,213.512 AAVE
2.1577%
15
Poloniex
AAVE-USDT$368.62
0.1061396 Eth
$9,338,111.00
25,069.634 AAVE
2.0635%
16
Gate.io
AAVE-USDT$372.06
0.1073518 Eth
$9,258,999.00
24,706.796 AAVE
2.0336%
17
Binance
AAVE-ETH$372.12
0.1071737 Eth
$8,970,419.00
23,942.926 AAVE
1.9708%
18
XT.COM
AAVE-USDT$370.64
0.1067042 Eth
$8,186,538.00
21,837.096 AAVE
1.7974%
19
FMCPAY
AAVE-USDT$371.96
0.1073133 Eth
$8,057,783.00
21,568.607 AAVE
1.7753%
20
KuCoin
AAVE-USDT$372.27
0.1074076 Eth
$7,605,397.00
20,429.747 AAVE
1.6816%
21
LATOKEN
AAVE-USDT$371.32
0.1070695 Eth
$6,888,591.00
18,551.581 AAVE
1.5270%
22
Hibt
AAVE-USDT$371.89
0.1072715 Eth
$6,595,904.00
17,601.001 AAVE
1.4488%
23
Bitunix
AAVE-USDT$372.29
0.1074053 Eth
$6,589,098.00
17,699.049 AAVE
1.4568%
24
Ourbit
AAVE-USDT$371.35
0.1070582 Eth
$5,843,554.00
15,606.508 AAVE
1.2846%
25
Bullish
AAVE-USDC$371.44
0.1071069 Eth
$5,344,197.00
14,295.828 AAVE
1.1767%
26
BTSE
AAVE-USDT$372.85
0.1075741 Eth
$5,106,098.00
13,694.853 AAVE
1.1272%
27
MEXC
AAVE-USDT$371.36
0.1070824 Eth
$4,669,093.00
12,572.979 AAVE
1.0349%
28
Biconomy.com
AAVE-USDT$371.71
0.1071832 Eth
$4,526,043.00
12,107.756 AAVE
0.9966%
29
Uniswap V3 (Ethereum)
0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9-0XC02AAA39B223FE8D0A0E5C4F27EAD9083C756CC2$372.79
0.1075522 Eth
$4,510,459.00
12,046.748 0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9
0.9916%
30
Dex-Trade
AAVE-USDT$372.72
0.1075367 Eth
$4,006,546.00
10,749.530 AAVE
0.8848%
31
LBank
AAVE-USDT$372.00
0.1073345 Eth
$3,987,592.00
10,719.270 AAVE
0.8823%
32
Tothemoon
AAVE-USDT$370.46
0.1066639 Eth
$3,864,229.00
10,430.933 AAVE
0.8586%
33
BYDFi
AAVE-USDT$371.98
0.1072810 Eth
$3,364,790.00
9,045.733 AAVE
0.7446%
34
FameEX
AAVE-USDT$372.20
0.1071292 Eth
$3,287,888.00
8,772.369 AAVE
0.7221%
35
Coinstore
AAVE-USDT$372.11
0.1072984 Eth
$2,932,843.00
7,842.301 AAVE
0.6455%
36
Binance
AAVE-USDC$371.48
0.1071741 Eth
$2,880,718.00
7,704.069 AAVE
0.6341%
37
HTX
AAVE-USDT$372.01
0.1073445 Eth
$2,755,930.00
7,374.987 AAVE
0.6070%
38
Coinbase Exchange
AAVE-BTC$372.01
0.1073269 Eth
$2,608,410.00
7,011.646 AAVE
0.5771%
39
QMall
AAVE-ETH$372.23
0.1073905 Eth
$2,549,976.00
6,805.713 AAVE
0.5602%
40
Hotcoin
AAVE-USDT$370.19
0.1065809 Eth
$2,393,774.00
6,466.413 AAVE
0.5323%
41
Binance
AAVE-BTC$372.12
0.1071007 Eth
$2,310,456.00
6,125.021 AAVE
0.5042%
42
Niza Global
AAVE-USD$371.82
0.1072718 Eth
$2,291,122.00
6,119.792 AAVE
0.5037%
43
Kraken
AAVE-USD$371.82
0.1072885 Eth
$2,275,461.00
6,119.792 AAVE
0.5037%
44
Coinbase Exchange
AAVE-EUR$373.03
0.1076219 Eth
$2,224,336.00
5,962.826 AAVE
0.4908%
45
XT.COM
AAVE-ETH$372.28
0.1073830 Eth
$2,060,838.00
5,501.610 AAVE
0.4528%
46
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$372.37
0.1074316 Eth
$1,945,218.00
5,196.984 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.4278%
47
Binance
AAVE-TRY$373.03
0.1073991 Eth
$1,775,494.00
4,703.813 AAVE
0.3872%
48
Uniswap V3 (Ethereum)
0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9-0X1F9840A85D5AF5BF1D1762F925BDADDC4201F984$373.62
0.1077913 Eth
$1,727,438.00
4,669.967 0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9
0.3844%
49
Phemex
AAVE-USDT$372.08
0.1073448 Eth
$1,554,499.00
4,177.911 AAVE
0.3439%
50
WEEX
AAVE-USDT$371.85
0.1072599 Eth
$1,498,971.00
4,031.136 AAVE
0.3318%
51
Bitvavo
AAVE-EUR$371.51
0.1069772 Eth
$1,472,004.00
3,962.244 AAVE
0.3261%
52
Trubit
AAVE-USDT$371.95
0.1073078 Eth
$1,431,165.00
3,835.297 AAVE
0.3157%
53
BitMart
AAVE-USDT$370.68
0.1069586 Eth
$1,422,058.00
3,836.383 AAVE
0.3158%
54
FMCPAY
AAVE-BTC$370.56
0.1066566 Eth
$1,401,281.00
3,722.630 AAVE
0.3064%
55
PointPay
AAVE-USDT$372.50
0.1074786 Eth
$1,380,262.00
3,683.316 AAVE
0.3032%
56
CoinEx
AAVE-USDT$369.81
0.1064954 Eth
$1,334,895.00
3,566.597 AAVE
0.2936%
57
BingX
AAVE-USDT$372.25
0.1074057 Eth
$1,308,308.00
3,490.466 AAVE
0.2873%
58
BitDelta
AAVE-USDT$371.85
0.1070727 Eth
$1,163,365.00
3,106.207 AAVE
0.2557%
59
FMCPAY
AAVE-ETH$371.10
0.1068481 Eth
$979,094.00
2,624.130 AAVE
0.2160%
60
WhiteBIT
AAVE-BTC$371.81
0.1072667 Eth
$909,329.00
2,445.676 AAVE
0.2013%
61
Toobit
AAVE-USDT$372.60
0.1074947 Eth
$819,822.00
2,186.926 AAVE
0.1800%
62
Pionex
AAVE-USDT$371.85
0.1070344 Eth
$818,931.00
2,179.796 AAVE
0.1794%
63
tanX
AAVE-USDC$372.24
0.1073934 Eth
$676,109.00
1,808.932 AAVE
0.1489%
64
BigONE
AAVE-USDT$372.45
0.1074507 Eth
$575,573.00
1,545.375 AAVE
0.1272%
65
WhiteBIT
AAVE-TRY$373.06
0.1073746 Eth
$381,869.00
1,023.616 AAVE
0.0843%
66
itBit
AAVE-USD$367.95
0.1061355 Eth
$355,380.00
965.839 AAVE
0.0795%
67
WOO X
AAVE-USDT$372.37
0.1071714 Eth
$348,532.00
935.991 AAVE
0.0770%
68
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X0D500B1D8E8EF31E21C99D1DB9A6444D3ADF1270$372.51
0.1074697 Eth
$317,755.00
854.916 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0704%
69
Dex-Trade
AAVE-ETH$369.55
0.1066229 Eth
$301,580.00
816.070 AAVE
0.0672%
70
Uniswap V3 (BSC)
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0XBB4CDB9CBD36B01BD1CBAEBF2DE08D9173BC095C$370.11
0.1067788 Eth
$242,786.00
652.694 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0537%
71
KuCoin
AAVE-BTC$371.75
0.1072583 Eth
$228,407.00
614.404 AAVE
0.0506%
72
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$372.26
0.1073639 Eth
$204,329.00
546.570 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0450%
73
Bitso
AAVE-USD$371.50
0.1071604 Eth
$202,718.00
545.671 AAVE
0.0449%
74
PointPay
AAVE-BTC$372.01
0.1073236 Eth
$196,908.00
523.044 AAVE
0.0431%
75
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0XC2132D05D31C914A87C6611C10748AEB04B58E8F$372.42
0.1074442 Eth
$168,008.00
447.671 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0368%
76
DeGate
0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9-0XA0B86991C6218B36C1D19D4A2E9EB0CE3606EB48$371.94
0.1071420 Eth
$143,657.00
383.577 0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9
0.0316%
77
Gemini
AAVE-USD$370.64
0.1069409 Eth
$114,245.00
308.237 AAVE
0.0254%
78
Bitkub
AAVE-THB$369.31
0.1063228 Eth
$107,030.00
289.806 AAVE
0.0239%
79
Quickswap (v3)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$371.47
0.1071800 Eth
$103,813.00
277.957 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0229%
80
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X2791BCA1F2DE4661ED88A30C99A7A9449AA84174$372.43
0.1074471 Eth
$100,838.00
268.478 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0221%
81
Uniswap V3 (Arbitrum One)
0XAF88D065E77C8CC2239327C5EDB3A432268E5831-0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196$368.93
0.1064371 Eth
$84,105.00
84,790.897 0XAF88D065E77C8CC2239327C5EDB3A432268E5831
6.9792%
82
BloFin
AAVE-USDT$372.40
0.1074487 Eth
$80,423.00
215.072 AAVE
0.0177%
83
Nonkyc.io
AAVE-ETH$372.91
0.1075970 Eth
$75,293.00
202.153 AAVE
0.0166%
84
TokoCrypto
AAVE-USDT$371.71
0.1072380 Eth
$66,198.00
178.089 AAVE
0.0147%
85
PancakeSwap V3 (BSC)
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0XBB4CDB9CBD36B01BD1CBAEBF2DE08D9173BC095C$372.42
0.1074455 Eth
$53,377.00
143.677 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0118%
86
Uniswap V3 (Arbitrum One)
0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196-0XFD086BC7CD5C481DCC9C85EBE478A1C0B69FCBB9$368.91
0.1064324 Eth
$52,855.00
142.154 0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196
0.0117%
87
Kraken
AAVE-GBP$371.23
0.1071170 Eth
$43,763.00
117.888 AAVE
0.0097%
88
Uniswap V2 (Ethereum)
0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9-0XC02AAA39B223FE8D0A0E5C4F27EAD9083C756CC2$369.66
0.1066602 Eth
$30,881.00
83.222 0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9
0.0069%
89
Uniswap V3 (BSC)
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0X55D398326F99059FF775485246999027B3197955$373.35
0.1077133 Eth
$25,979.00
69.060 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0057%
90
Nonkyc.io
AAVE-BTC$373.29
0.1077133 Eth
$25,510.00
67.981 AAVE
0.0056%
91
Sushiswap (Polygon POS)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$371.89
0.1073024 Eth
$22,363.00
59.793 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0049%
92
Bitexen
AAVE-TRY$369.57
0.1064597 Eth
$19,595.65
53.023 AAVE
0.0044%
93
ApeSwap
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0XBB4CDB9CBD36B01BD1CBAEBF2DE08D9173BC095C$369.55
0.1066265 Eth
$15,584.32
45.975 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0038%
94
Quickswap
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$369.02
0.1064802 Eth
$10,487.04
28.268 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0023%
95
CoinEx
AAVE-BTC$370.73
0.1069228 Eth
$7,306.43
19.454 AAVE
0.0016%
96
CoinEx
AAVE-USDC$370.70
0.1069140 Eth
$5,202.70
13.983 AAVE
0.0012%
97
Uniswap V3 (Polygon)
0X53E0BCA35EC356BD5DDDFEBBD1FC0FD03FABAD39-0XD6DF932A45C0F255F85145F286EA0B292B21C90B$372.36
0.1074369 Eth
$3,917.00
157.479 0X53E0BCA35EC356BD5DDDFEBBD1FC0FD03FABAD39
0.0130%
98
Uniswap V3 (Polygon)
0XC3C7D422809852031B44AB29EEC9F1EFF2A58756-0XD6DF932A45C0F255F85145F286EA0B292B21C90B$372.36
0.1074369 Eth
$1,567.48
818.344 0XC3C7D422809852031B44AB29EEC9F1EFF2A58756
0.0674%
99
Uniswap V3 (Avalanche)
0X63A72806098BD3D9520CC43356DD78AFE5D386D9-0XB97EF9EF8734C71904D8002F8B6BC66DD9C48A6E$373.67
0.1075839 Eth
$888.36
2.376 0X63A72806098BD3D9520CC43356DD78AFE5D386D9
0.0002%
100
Nominex
AAVE-USDT$370.16
0.1065826 Eth
$185.50
0.501 AAVE
0.0000%

Contract Source Code Verified (Exact Match)

Contract Name:
InitializableAdminUpgradeabilityProxy

Compiler Version
v0.6.10+commit.00c0fcaf

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion
File 1 of 19 : InitializableAdminUpgradeabilityProxy.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import "./BaseAdminUpgradeabilityProxy.sol";
import "./InitializableUpgradeabilityProxy.sol";

/**
 * @title InitializableAdminUpgradeabilityProxy
 * @dev Extends from BaseAdminUpgradeabilityProxy with an initializer for 
 * initializing the implementation, admin, and init data.
 */
contract InitializableAdminUpgradeabilityProxy is BaseAdminUpgradeabilityProxy, InitializableUpgradeabilityProxy {
    /**
   * Contract initializer.
   * @param _logic address of the initial implementation.
   * @param _admin Address of the proxy administrator.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
    function initialize(address _logic, address _admin, bytes memory _data) public payable {
        require(_implementation() == address(0));
        InitializableUpgradeabilityProxy.initialize(_logic, _data);
        assert(ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _setAdmin(_admin);
    }

    /**
    * @dev Only fall back when the sender is not the admin.
    */
    function _willFallback() internal override(BaseAdminUpgradeabilityProxy, Proxy) {
        BaseAdminUpgradeabilityProxy._willFallback();
    }

}

File 2 of 19 : IERC20.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 3 of 19 : IERC20Detailed.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {IERC20} from "./IERC20.sol";

interface IERC20Detailed is IERC20 {
    function name() external view returns(string memory);
    function symbol() external view returns(string memory);
    function decimals() external view returns(uint8);
}

File 4 of 19 : ITransferHook.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

interface ITransferHook {
    function onTransfer(address from, address to, uint256 amount) external;
}

File 5 of 19 : Address.sol
pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

File 6 of 19 : BaseAdminUpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './UpgradeabilityProxy.sol';

/**
 * @title BaseAdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
   * validated in the constructor.
   */

  bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    (bool success,) = newImplementation.delegatecall(data);
    require(success);
  }

  /**
   * @return adm The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal override virtual {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

File 7 of 19 : UpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './BaseUpgradeabilityProxy.sol';

/**
 * @title UpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with a constructor for initializing
 * implementation and init data.
 */
contract UpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract constructor.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  constructor(address _logic, bytes memory _data) public payable {
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if(_data.length > 0) {
      (bool success,) = _logic.delegatecall(_data);
      require(success);
    }
  }  
}

File 8 of 19 : BaseUpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './Proxy.sol';
import './Address.sol';

/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal override view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(Address.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

File 9 of 19 : Proxy.sol
pragma solidity ^0.6.0;

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  fallback () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal virtual view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize()) }
      default { return(0, returndatasize()) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

File 10 of 19 : Context.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

File 11 of 19 : ERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./Context.sol";
import "../interfaces/IERC20.sol";
import "./SafeMath.sol";
import "./Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string internal _name;
    string internal _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

File 12 of 19 : SafeMath.sol
pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 13 of 19 : InitializableUpgradeabilityProxy.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import "./BaseUpgradeabilityProxy.sol";

/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
    /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
    function initialize(address _logic, bytes memory _data) public payable {
        require(_implementation() == address(0));
        assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if (_data.length > 0) {
            (bool success, ) = _logic.delegatecall(_data);
            require(success);
        }
    }
}

File 14 of 19 : AaveToken.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {ERC20} from "../open-zeppelin/ERC20.sol";
import {ITransferHook} from "../interfaces/ITransferHook.sol";
import {VersionedInitializable} from "../utils/VersionedInitializable.sol";


/**
* @notice implementation of the AAVE token contract
* @author Aave
*/
contract AaveToken is ERC20, VersionedInitializable {

    /// @dev snapshot of a value on a specific block, used for balances
    struct Snapshot {
        uint128 blockNumber;
        uint128 value;
    }

    string internal constant NAME = "Aave Token";
    string internal constant SYMBOL = "AAVE";
    uint8 internal constant DECIMALS = 18;

    /// @dev the amount being distributed for the LEND -> AAVE migration
    uint256 internal constant MIGRATION_AMOUNT = 13000000 ether;

    /// @dev the amount being distributed for the PSI and PEI
    uint256 internal constant DISTRIBUTION_AMOUNT = 3000000 ether;

    uint256 public constant REVISION = 1;

    /// @dev owner => next valid nonce to submit with permit()
    mapping (address => uint256) public _nonces;

    mapping (address => mapping (uint256 => Snapshot)) public _snapshots;

    mapping (address => uint256) public _countsSnapshots;

    /// @dev reference to the Aave governance contract to call (if initialized) on _beforeTokenTransfer
    /// !!! IMPORTANT The Aave governance is considered a trustable contract, being its responsibility
    /// to control all potential reentrancies by calling back the AaveToken
    ITransferHook public _aaveGovernance;

    bytes32 public DOMAIN_SEPARATOR;
    bytes public constant EIP712_REVISION = bytes("1");
    bytes32 internal constant EIP712_DOMAIN = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    event SnapshotDone(address owner, uint128 oldValue, uint128 newValue);

    constructor() ERC20(NAME, SYMBOL) public {}

    /**
    * @dev initializes the contract upon assignment to the InitializableAdminUpgradeabilityProxy
    * @param migrator the address of the LEND -> AAVE migration contract
    * @param distributor the address of the AAVE distribution contract
    */
    function initialize(
        address migrator,
        address distributor,
        ITransferHook aaveGovernance
    ) external initializer {

        uint256 chainId;

        //solium-disable-next-line
        assembly {
            chainId := chainid()
        }

        DOMAIN_SEPARATOR = keccak256(abi.encode(
            EIP712_DOMAIN,
            keccak256(bytes(NAME)),
            keccak256(EIP712_REVISION),
            chainId,
            address(this)
        ));
        _name = NAME;
        _symbol = SYMBOL;
        _setupDecimals(DECIMALS);
        _aaveGovernance = aaveGovernance;
        _mint(migrator, MIGRATION_AMOUNT);
        _mint(distributor, DISTRIBUTION_AMOUNT);
    }

    /**
    * @dev implements the permit function as for https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
    * @param owner the owner of the funds
    * @param spender the spender
    * @param value the amount
    * @param deadline the deadline timestamp, type(uint256).max for no deadline
    * @param v signature param
    * @param s signature param
    * @param r signature param
    */

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external {
        require(owner != address(0), "INVALID_OWNER");
        //solium-disable-next-line
        require(block.timestamp <= deadline, "INVALID_EXPIRATION");
        uint256 currentValidNonce = _nonces[owner];
        bytes32 digest = keccak256(
                abi.encodePacked(
                    "\x19\x01",
                    DOMAIN_SEPARATOR,
                    keccak256(
                        abi.encode(PERMIT_TYPEHASH, owner, spender, value, currentValidNonce, deadline))
                    )
        );

        require(owner == ecrecover(digest, v, r, s), "INVALID_SIGNATURE");
        _nonces[owner] = currentValidNonce.add(1);
        _approve(owner, spender, value);
    }

    /**
    * @dev returns the revision of the implementation contract
    */
    function getRevision() internal pure override returns (uint256) {
        return REVISION;
    }

    /**
    * @dev Writes a snapshot for an owner of tokens
    * @param owner The owner of the tokens
    * @param oldValue The value before the operation that is gonna be executed after the snapshot
    * @param newValue The value after the operation
    */
    function _writeSnapshot(address owner, uint128 oldValue, uint128 newValue) internal {
        uint128 currentBlock = uint128(block.number);

        uint256 ownerCountOfSnapshots = _countsSnapshots[owner];
        mapping (uint256 => Snapshot) storage snapshotsOwner = _snapshots[owner];

        // Doing multiple operations in the same block
        if (ownerCountOfSnapshots != 0 && snapshotsOwner[ownerCountOfSnapshots.sub(1)].blockNumber == currentBlock) {
            snapshotsOwner[ownerCountOfSnapshots.sub(1)].value = newValue;
        } else {
            snapshotsOwner[ownerCountOfSnapshots] = Snapshot(currentBlock, newValue);
            _countsSnapshots[owner] = ownerCountOfSnapshots.add(1);
        }

        emit SnapshotDone(owner, oldValue, newValue);
    }

    /**
    * @dev Writes a snapshot before any operation involving transfer of value: _transfer, _mint and _burn
    * - On _transfer, it writes snapshots for both "from" and "to"
    * - On _mint, only for _to
    * - On _burn, only for _from
    * @param from the from address
    * @param to the to address
    * @param amount the amount to transfer
    */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal override {
        if (from == to) {
            return;
        }

        if (from != address(0)) {
            uint256 fromBalance = balanceOf(from);
            _writeSnapshot(from, uint128(fromBalance), uint128(fromBalance.sub(amount)));
        }
        if (to != address(0)) {
            uint256 toBalance = balanceOf(to);
            _writeSnapshot(to, uint128(toBalance), uint128(toBalance.add(amount)));
        }

        // caching the aave governance address to avoid multiple state loads
        ITransferHook aaveGovernance = _aaveGovernance;
        if (aaveGovernance != ITransferHook(0)) {
            aaveGovernance.onTransfer(from, to, amount);
        }
    }
}

File 15 of 19 : VersionedInitializable.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

/**
 * @title VersionedInitializable
 *
 * @dev Helper contract to support initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 *
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 */
abstract contract VersionedInitializable {
    /**
   * @dev Indicates that the contract has been initialized.
   */
    uint256 internal lastInitializedRevision = 0;

   /**
   * @dev Modifier to use in the initializer function of a contract.
   */
    modifier initializer() {
        uint256 revision = getRevision();
        require(revision > lastInitializedRevision, "Contract instance has already been initialized");

        lastInitializedRevision = revision;

        _;

    }

    /// @dev returns the revision number of the contract.
    /// Needs to be defined in the inherited class as a constant.
    function getRevision() internal pure virtual returns(uint256);


    // Reserved storage space to allow for layout changes in the future.
    uint256[50] private ______gap;
}

File 16 of 19 : LendToAaveMigrator.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {IERC20} from "../interfaces/IERC20.sol";
import {SafeMath} from "../open-zeppelin/SafeMath.sol";
import {VersionedInitializable} from "../utils/VersionedInitializable.sol";


/**
* @title LendToAaveMigrator
* @notice This contract implements the migration from LEND to AAVE token
* @author Aave 
*/
contract LendToAaveMigrator is VersionedInitializable {
    using SafeMath for uint256;

    IERC20 public immutable AAVE;
    IERC20 public immutable LEND;
    uint256 public immutable LEND_AAVE_RATIO;
    uint256 public constant REVISION = 1;
    
    uint256 public _totalLendMigrated;

    /**
    * @dev emitted on migration
    * @param sender the caller of the migration
    * @param amount the amount being migrated
    */
    event LendMigrated(address indexed sender, uint256 indexed amount);

    /**
    * @param aave the address of the AAVE token
    * @param lend the address of the LEND token
    * @param lendAaveRatio the exchange rate between LEND and AAVE 
     */
    constructor(IERC20 aave, IERC20 lend, uint256 lendAaveRatio) public {
        AAVE = aave;
        LEND = lend;
        LEND_AAVE_RATIO = lendAaveRatio;
    }

    /**
    * @dev initializes the implementation
    */
    function initialize() public initializer {
    }

    /**
    * @dev returns true if the migration started
    */
    function migrationStarted() external view returns(bool) {
        return lastInitializedRevision != 0;
    }


    /**
    * @dev executes the migration from LEND to AAVE. Users need to give allowance to this contract to transfer LEND before executing
    * this transaction.
    * @param amount the amount of LEND to be migrated
    */
    function migrateFromLEND(uint256 amount) external {
        require(lastInitializedRevision != 0, "MIGRATION_NOT_STARTED");

        _totalLendMigrated = _totalLendMigrated.add(amount);
        LEND.transferFrom(msg.sender, address(this), amount);
        AAVE.transfer(msg.sender, amount.div(LEND_AAVE_RATIO));
        emit LendMigrated(msg.sender, amount);
    }

    /**
    * @dev returns the implementation revision
    * @return the implementation revision
    */
    function getRevision() internal pure override returns (uint256) {
        return REVISION;
    }

}

File 17 of 19 : DoubleTransferHelper.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import "../interfaces/IERC20.sol";

contract DoubleTransferHelper {

    IERC20 public immutable AAVE;

    constructor(IERC20 aave) public {
        AAVE = aave;
    }

    function doubleSend(address to, uint256 amount1, uint256 amount2) external {
        AAVE.transfer(to, amount1);
        AAVE.transfer(to, amount2);
    }
}

File 18 of 19 : MintableErc20.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import "../open-zeppelin/ERC20.sol";

/**
 * @title ERC20Mintable
 * @dev ERC20 minting logic
 */
contract MintableErc20 is ERC20 {
    constructor(string memory name, string memory symbol, uint8 decimals) ERC20(name, symbol) public {
        _setupDecimals(decimals);
    }
    /**
     * @dev Function to mint tokens
     * @param value The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(uint256 value) public returns (bool) {
        _mint(msg.sender, value);
        return true;
    }
}

File 19 of 19 : MockTransferHook.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {ITransferHook} from "../interfaces/ITransferHook.sol";

contract MockTransferHook is ITransferHook {
    event MockHookEvent();

    function onTransfer(address from, address to, uint256 amount) external override {
        emit MockHookEvent();
    }
}

Settings
{
  "metadata": {
    "useLiteralContent": false
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "evmVersion": "istanbul",
  "libraries": {}
}

Contract Security Audit

Contract ABI

[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"AdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"changeAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"implementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"address","name":"_admin","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"initialize","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"initialize","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"}],"name":"upgradeTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}]

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

Deployed Bytecode

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

Loading...
Loading
Loading...
Loading
[ Download: CSV Export  ]
[ Download: CSV Export  ]

A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.