ETH Price: $2,624.65 (+0.53%)

Token

Aave Token (AAVE)
 

Overview

Max Total Supply

16,000,000 AAVE

Holders

171,609 (0.00%)

Market

Price

$150.10 @ 0.057189 ETH (-1.77%)

Onchain Market Cap

$2,401,600,000.00

Circulating Supply Market Cap

$2,246,006,914.00

Other Info

Token Contract (WITH 18 Decimals)

Balance
0.000000000000000001 AAVE

Value
$0.00 ( ~0 Eth) [0.0000%]
0xd21258ed22bebc33bbc6333e0ba6bbb44014a9ab
Loading...
Loading
Loading...
Loading
Loading...
Loading

OVERVIEW

Aave is an Open Source and Non-Custodial protocol to earn interest on deposits & borrow assets. It also features access to highly innovative flash loans, which let developers borrow instantly and easily; no collateral needed. With 16 different assets, 5 of which are stablecoins.

Market

Volume (24H):$204,760,640.00
Market Capitalization:$2,246,006,914.00
Circulating Supply:14,963,134.00 AAVE
Market Data Source: Coinmarketcap

# Exchange Pair Price  24H Volume % Volume
1
Binance
AAVE-USDT$150.05
0.0571842 Eth
$17,863,573.00
117,335.707 AAVE
10.4741%
2
Poloniex
AAVE-USDT$150.09
0.0571998 Eth
$11,737,727.00
77,059.747 AAVE
6.8788%
3
WhiteBIT
AAVE-USDT$149.91
0.0571356 Eth
$8,399,083.00
56,028.422 AAVE
5.0014%
4
BVOX
AAVE-USDT$149.68
0.0571106 Eth
$7,650,286.00
50,131.504 AAVE
4.4750%
5
Coinbase Exchange
AAVE-USD$150.13
0.0572166 Eth
$5,637,198.00
37,548.779 AAVE
3.3518%
6
P2B
AAVE-USDT$150.04
0.0571868 Eth
$4,832,747.00
32,209.295 AAVE
2.8752%
7
Upbit
AAVE-KRW$150.63
0.0574084 Eth
$4,349,331.00
28,874.682 AAVE
2.5775%
8
LATOKEN
AAVE-USDT$150.05
0.0572548 Eth
$4,020,636.00
26,795.381 AAVE
2.3919%
9
OKX
AAVE-USDT$149.98
0.0571609 Eth
$3,304,570.00
21,711.323 AAVE
1.9381%
10
HitBTC
AAVE-USDT$150.03
0.0571803 Eth
$3,257,373.00
21,374.693 AAVE
1.9080%
11
FMFW.io
AAVE-USDT$149.79
0.0571667 Eth
$3,221,635.00
21,507.555 AAVE
1.9199%
12
Hotcoin
AAVE-USDT$150.08
0.0571946 Eth
$3,160,555.00
21,059.210 AAVE
1.8799%
13
LBank
AAVE-USDT$149.96
0.0571497 Eth
$3,091,637.00
20,616.270 AAVE
1.8403%
14
HTX
AAVE-USDT$149.78
0.0570894 Eth
$3,072,543.00
20,189.847 AAVE
1.8023%
15
Gate.io
AAVE-USDT$149.97
0.0571535 Eth
$3,004,688.00
19,780.028 AAVE
1.7657%
16
FMCPAY
AAVE-USDT$149.97
0.0571560 Eth
$2,986,144.00
19,567.093 AAVE
1.7467%
17
Bybit
AAVE-USDT$149.94
0.0571466 Eth
$2,863,111.00
18,839.696 AAVE
1.6817%
18
XT.COM
AAVE-USDT$149.87
0.0572323 Eth
$2,676,028.00
17,548.013 AAVE
1.5664%
19
Uniswap V3 (Ethereum)
0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9-0XC02AAA39B223FE8D0A0E5C4F27EAD9083C756CC2$150.75
0.0574542 Eth
$2,541,487.00
16,714.462 0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9
1.4920%
20
CoinW
AAVE-USDT$150.02
0.0572503 Eth
$2,476,923.00
16,510.334 AAVE
1.4738%
21
Trubit
AAVE-USDT$150.09
0.0572051 Eth
$2,313,959.00
15,167.609 AAVE
1.3539%
22
Bullish
AAVE-USDC$149.97
0.0571593 Eth
$2,208,008.00
14,503.508 AAVE
1.2947%
23
DigiFinex
AAVE-USDT$149.93
0.0571425 Eth
$2,142,295.00
14,288.622 AAVE
1.2755%
24
Ourbit
AAVE-USDT$149.94
0.0571423 Eth
$1,972,420.00
12,951.356 AAVE
1.1561%
25
Biconomy.com
AAVE-USDT$149.94
0.0571463 Eth
$1,963,220.00
12,874.970 AAVE
1.1493%
26
Bilaxy
AAVE-USDT$150.01
0.0571807 Eth
$1,758,655.00
11,723.341 AAVE
1.0465%
27
Cryptology
AAVE-USDT$150.13
0.0572264 Eth
$1,702,693.00
11,341.227 AAVE
1.0124%
28
Bitunix
AAVE-USDT$150.06
0.0571956 Eth
$1,664,811.00
11,094.063 AAVE
0.9903%
29
BTSE
AAVE-USDT$149.97
0.0571577 Eth
$1,537,496.00
10,252.104 AAVE
0.9152%
30
Phemex
AAVE-USDT$149.94
0.0571421 Eth
$1,316,990.00
8,783.385 AAVE
0.7841%
31
Bitget
AAVE-USDT$149.80
0.0570923 Eth
$1,289,421.00
8,451.372 AAVE
0.7544%
32
Binance
AAVE-ETH$150.10
0.0572319 Eth
$1,216,228.00
7,937.449 AAVE
0.7085%
33
Binance
AAVE-USDC$150.38
0.0573251 Eth
$1,141,383.00
7,515.061 AAVE
0.6708%
34
Niza Global
AAVE-USD$150.23
0.0572699 Eth
$777,825.00
5,124.165 AAVE
0.4574%
35
Kraken
AAVE-USD$149.84
0.0571086 Eth
$768,879.00
5,131.335 AAVE
0.4581%
36
WEEX
AAVE-USDT$150.44
0.0573726 Eth
$744,150.00
4,881.000 AAVE
0.4357%
37
BigONE
AAVE-USDT$149.72
0.0572848 Eth
$729,135.00
4,869.973 AAVE
0.4347%
38
BYDFi
AAVE-USDT$149.94
0.0571518 Eth
$702,793.00
4,687.059 AAVE
0.4184%
39
FameEX
AAVE-USDT$149.92
0.0571457 Eth
$701,442.00
4,607.938 AAVE
0.4113%
40
KuCoin
AAVE-USDT$150.04
0.0571828 Eth
$581,962.00
3,878.813 AAVE
0.3462%
41
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$149.48
0.0569728 Eth
$552,652.00
3,627.712 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.3238%
42
Uniswap V3 (Ethereum)
0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9-0X1F9840A85D5AF5BF1D1762F925BDADDC4201F984$150.75
0.0574541 Eth
$526,686.00
3,466.274 0X7FC66500C84A76AD7E9C93437BFC5AC33E2DDAE9
0.3094%
43
Deepcoin
AAVE-USDT$149.84
0.0571137 Eth
$451,363.00
2,970.317 AAVE
0.2651%
44
Bithumb
AAVE-KRW$150.48
0.0573557 Eth
$377,910.00
2,511.312 AAVE
0.2242%
45
Bitvavo
AAVE-EUR$148.92
0.0567663 Eth
$335,609.00
2,253.620 AAVE
0.2012%
46
Tapbit
AAVE-USDT$149.84
0.0571065 Eth
$334,202.00
2,192.602 AAVE
0.1957%
47
Coinstore
AAVE-USDT$149.97
0.0571577 Eth
$312,762.00
2,053.457 AAVE
0.1833%
48
BingX
AAVE-USDT$149.96
0.0571539 Eth
$298,695.00
1,962.345 AAVE
0.1752%
49
Binance
AAVE-BTC$149.90
0.0571452 Eth
$288,187.00
1,871.703 AAVE
0.1671%
50
XT.COM
AAVE-ETH$150.10
0.0573167 Eth
$272,603.00
1,781.163 AAVE
0.1590%
51
MEXC
AAVE-USDT$150.38
0.0573266 Eth
$270,688.00
1,800.041 AAVE
0.1607%
52
PointPay
AAVE-USDT$149.94
0.0571540 Eth
$268,614.00
1,766.543 AAVE
0.1577%
53
Nonkyc.io
AAVE-USDT$149.64
0.0570402 Eth
$253,091.00
1,661.514 AAVE
0.1483%
54
Crypto.com Exchange
AAVE-USDT$150.04
0.0571858 Eth
$248,615.00
1,656.957 AAVE
0.1479%
55
tanX
AAVE-USDC$150.09
0.0572744 Eth
$244,438.00
1,603.052 AAVE
0.1431%
56
CoinEx
AAVE-USDT$149.90
0.0571366 Eth
$201,033.00
1,320.347 AAVE
0.1179%
57
Toobit
AAVE-USDT$149.79
0.0570947 Eth
$190,222.00
1,248.473 AAVE
0.1114%
58
FMCPAY
AAVE-ETH$150.07
0.0572012 Eth
$188,589.00
1,238.740 AAVE
0.1106%
59
Uniswap V3 (Polygon)
0X3C499C542CEF5E3811E1192CE70D8CC03D5C3359-0XD6DF932A45C0F255F85145F286EA0B292B21C90B$150.34
0.0572986 Eth
$178,575.00
180,972.104 0X3C499C542CEF5E3811E1192CE70D8CC03D5C3359
16.1546%
60
Pionex
AAVE-USDT$149.93
0.0571464 Eth
$173,395.00
1,138.626 AAVE
0.1016%
61
BitDelta
AAVE-USDT$149.95
0.0571501 Eth
$168,844.00
1,106.877 AAVE
0.0988%
62
CoinTR
AAVE-USDT$149.97
0.0571577 Eth
$165,138.00
1,082.360 AAVE
0.0966%
63
Binance
AAVE-TRY$150.43
0.0573348 Eth
$147,186.00
963.520 AAVE
0.0860%
64
Coinbase Exchange
AAVE-BTC$150.03
0.0571770 Eth
$146,804.00
978.478 AAVE
0.0873%
65
Uniswap V3 (Arbitrum One)
0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196-0X82AF49447D8A07E3BD95BD0D56F35241523FBAB1$149.47
0.0569692 Eth
$140,531.00
925.920 0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196
0.0827%
66
Nominex
AAVE-USDT$149.99
0.0571614 Eth
$133,348.00
889.037 AAVE
0.0794%
67
HitBTC
AAVE-ETH$150.59
0.0573972 Eth
$132,696.00
867.095 AAVE
0.0774%
68
FMFW.io
AAVE-ETH$150.57
0.0573854 Eth
$130,561.00
867.095 AAVE
0.0774%
69
Crypto.com Exchange
AAVE-USD$149.99
0.0571643 Eth
$120,813.00
805.487 AAVE
0.0719%
70
Quickswap (v3)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$150.52
0.0573688 Eth
$81,415.00
531.478 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0474%
71
Gemini
AAVE-USD$149.93
0.0571378 Eth
$80,843.00
539.206 AAVE
0.0481%
72
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X0D500B1D8E8EF31E21C99D1DB9A6444D3ADF1270$150.34
0.0572986 Eth
$73,828.00
484.873 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0433%
73
Binance
AAVE-FDUSD$149.92
0.0572102 Eth
$69,003.00
452.092 AAVE
0.0404%
74
Nonkyc.io
AAVE-ETH$150.61
0.0574072 Eth
$49,090.00
322.461 AAVE
0.0288%
75
Uniswap V3 (Arbitrum One)
0XAF88D065E77C8CC2239327C5EDB3A432268E5831-0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196$149.47
0.0569692 Eth
$45,143.00
45,837.132 0XAF88D065E77C8CC2239327C5EDB3A432268E5831
4.0917%
76
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X7CEB23FD6BC0ADD59E62AC25578270CFF1B9F619$150.36
0.0573102 Eth
$43,818.00
286.514 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0256%
77
Dex-Trade
AAVE-ETH$150.05
0.0571865 Eth
$40,571.00
270.393 AAVE
0.0241%
78
BloFin
AAVE-USDT$150.03
0.0571837 Eth
$38,309.00
251.284 AAVE
0.0224%
79
Bitso
AAVE-USD$149.85
0.0571781 Eth
$34,029.00
227.084 AAVE
0.0203%
80
Bitlo
AAVE-TRY$150.87
0.0575060 Eth
$32,560.00
213.934 AAVE
0.0191%
81
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0X2791BCA1F2DE4661ED88A30C99A7A9449AA84174$150.34
0.0572986 Eth
$31,901.00
209.056 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0187%
82
Bitkub
AAVE-THB$150.11
0.0572842 Eth
$29,489.00
196.449 AAVE
0.0175%
83
Uniswap V3 (Optimism)
0X76FB31FB4AF56892A25E32CFC43DE717950C9278-0X4200000000000000000000000000000000000006$149.48
0.0569728 Eth
$26,815.00
176.490 0X76FB31FB4AF56892A25E32CFC43DE717950C9278
0.0158%
84
WhiteBIT
AAVE-TRY$150.29
0.0572810 Eth
$22,247.00
148.025 AAVE
0.0132%
85
TokoCrypto
AAVE-USDT$150.03
0.0571852 Eth
$21,769.00
145.099 AAVE
0.0130%
86
Nonkyc.io
AAVE-BTC$149.62
0.0570267 Eth
$19,774.63
128.658 AAVE
0.0115%
87
WOO X
AAVE-USDT$150.02
0.0571838 Eth
$12,973.72
86.479 AAVE
0.0077%
88
Uniswap V3 (Polygon)
0XD6DF932A45C0F255F85145F286EA0B292B21C90B-0XC2132D05D31C914A87C6611C10748AEB04B58E8F$150.38
0.0573136 Eth
$12,383.06
81.207 0XD6DF932A45C0F255F85145F286EA0B292B21C90B
0.0072%
89
Uniswap V3 (Optimism)
0X76FB31FB4AF56892A25E32CFC43DE717950C9278-0X4200000000000000000000000000000000000006$150.34
0.0572986 Eth
$12,329.76
81.713 0X76FB31FB4AF56892A25E32CFC43DE717950C9278
0.0073%
90
ApeSwap
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0XBB4CDB9CBD36B01BD1CBAEBF2DE08D9173BC095C$149.20
0.0568631 Eth
$4,912.61
32.383 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0029%
91
CEX.IO
AAVE-USDT$150.09
0.0571751 Eth
$4,775.97
31.081 AAVE
0.0028%
92
Uniswap V3 (BSC)
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0X55D398326F99059FF775485246999027B3197955$148.80
0.0567144 Eth
$4,681.11
30.893 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0028%
93
Uniswap V3 (Arbitrum One)
0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196-0XFD086BC7CD5C481DCC9C85EBE478A1C0B69FCBB9$149.33
0.0569750 Eth
$3,410.24
22.461 0XBA5DDD1F9D7F570DC94A51479A000E3BCE967196
0.0020%
94
CoinEx
AAVE-BTC$149.81
0.0571008 Eth
$3,087.53
20.123 AAVE
0.0018%
95
CoinEx
AAVE-USDC$150.02
0.0571796 Eth
$2,918.17
19.059 AAVE
0.0017%
96
FMFW.io
AAVE-BTC$148.93
0.0567563 Eth
$1,310.89
8.802 AAVE
0.0008%
97
Uniswap V3 (BSC)
0XFB6115445BFF7B52FEB98650C87F44907E58F802-0XBB4CDB9CBD36B01BD1CBAEBF2DE08D9173BC095C$148.86
0.0566898 Eth
$981.38
6.512 0XFB6115445BFF7B52FEB98650C87F44907E58F802
0.0006%
98
Uniswap V3 (Optimism)
0X76FB31FB4AF56892A25E32CFC43DE717950C9278-0X68F180FCCE6836688E9084F035309E29BF0A2095$150.84
0.0575115 Eth
$557.03
3.663 0X76FB31FB4AF56892A25E32CFC43DE717950C9278
0.0003%
99
Uniswap V3 (Polygon)
0X6F7C932E7684666C9FD1D44527765433E01FF61D-0XD6DF932A45C0F255F85145F286EA0B292B21C90B$150.83
0.0574846 Eth
$415.50
0.376 0X6F7C932E7684666C9FD1D44527765433E01FF61D
0.0000%
100
Uniswap V3 (Optimism)
0X0B2C639C533813F4AA9D7837CAF62653D097FF85-0X76FB31FB4AF56892A25E32CFC43DE717950C9278$150.36
0.0573030 Eth
$351.17
355.970 0X0B2C639C533813F4AA9D7837CAF62653D097FF85
0.0318%

Contract Source Code Verified (Exact Match)

Contract Name:
InitializableAdminUpgradeabilityProxy

Compiler Version
v0.6.10+commit.00c0fcaf

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion
File 1 of 19 : InitializableAdminUpgradeabilityProxy.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import "./BaseAdminUpgradeabilityProxy.sol";
import "./InitializableUpgradeabilityProxy.sol";

/**
 * @title InitializableAdminUpgradeabilityProxy
 * @dev Extends from BaseAdminUpgradeabilityProxy with an initializer for 
 * initializing the implementation, admin, and init data.
 */
contract InitializableAdminUpgradeabilityProxy is BaseAdminUpgradeabilityProxy, InitializableUpgradeabilityProxy {
    /**
   * Contract initializer.
   * @param _logic address of the initial implementation.
   * @param _admin Address of the proxy administrator.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
    function initialize(address _logic, address _admin, bytes memory _data) public payable {
        require(_implementation() == address(0));
        InitializableUpgradeabilityProxy.initialize(_logic, _data);
        assert(ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _setAdmin(_admin);
    }

    /**
    * @dev Only fall back when the sender is not the admin.
    */
    function _willFallback() internal override(BaseAdminUpgradeabilityProxy, Proxy) {
        BaseAdminUpgradeabilityProxy._willFallback();
    }

}

File 2 of 19 : IERC20.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 3 of 19 : IERC20Detailed.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {IERC20} from "./IERC20.sol";

interface IERC20Detailed is IERC20 {
    function name() external view returns(string memory);
    function symbol() external view returns(string memory);
    function decimals() external view returns(uint8);
}

File 4 of 19 : ITransferHook.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

interface ITransferHook {
    function onTransfer(address from, address to, uint256 amount) external;
}

File 5 of 19 : Address.sol
pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

File 6 of 19 : BaseAdminUpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './UpgradeabilityProxy.sol';

/**
 * @title BaseAdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
   * validated in the constructor.
   */

  bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    (bool success,) = newImplementation.delegatecall(data);
    require(success);
  }

  /**
   * @return adm The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal override virtual {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

File 7 of 19 : UpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './BaseUpgradeabilityProxy.sol';

/**
 * @title UpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with a constructor for initializing
 * implementation and init data.
 */
contract UpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract constructor.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  constructor(address _logic, bytes memory _data) public payable {
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if(_data.length > 0) {
      (bool success,) = _logic.delegatecall(_data);
      require(success);
    }
  }  
}

File 8 of 19 : BaseUpgradeabilityProxy.sol
pragma solidity ^0.6.0;

import './Proxy.sol';
import './Address.sol';

/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal override view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(Address.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

File 9 of 19 : Proxy.sol
pragma solidity ^0.6.0;

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  fallback () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal virtual view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize()) }
      default { return(0, returndatasize()) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

File 10 of 19 : Context.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

File 11 of 19 : ERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./Context.sol";
import "../interfaces/IERC20.sol";
import "./SafeMath.sol";
import "./Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string internal _name;
    string internal _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

File 12 of 19 : SafeMath.sol
pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 13 of 19 : InitializableUpgradeabilityProxy.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import "./BaseUpgradeabilityProxy.sol";

/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
    /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
    function initialize(address _logic, bytes memory _data) public payable {
        require(_implementation() == address(0));
        assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if (_data.length > 0) {
            (bool success, ) = _logic.delegatecall(_data);
            require(success);
        }
    }
}

File 14 of 19 : AaveToken.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {ERC20} from "../open-zeppelin/ERC20.sol";
import {ITransferHook} from "../interfaces/ITransferHook.sol";
import {VersionedInitializable} from "../utils/VersionedInitializable.sol";


/**
* @notice implementation of the AAVE token contract
* @author Aave
*/
contract AaveToken is ERC20, VersionedInitializable {

    /// @dev snapshot of a value on a specific block, used for balances
    struct Snapshot {
        uint128 blockNumber;
        uint128 value;
    }

    string internal constant NAME = "Aave Token";
    string internal constant SYMBOL = "AAVE";
    uint8 internal constant DECIMALS = 18;

    /// @dev the amount being distributed for the LEND -> AAVE migration
    uint256 internal constant MIGRATION_AMOUNT = 13000000 ether;

    /// @dev the amount being distributed for the PSI and PEI
    uint256 internal constant DISTRIBUTION_AMOUNT = 3000000 ether;

    uint256 public constant REVISION = 1;

    /// @dev owner => next valid nonce to submit with permit()
    mapping (address => uint256) public _nonces;

    mapping (address => mapping (uint256 => Snapshot)) public _snapshots;

    mapping (address => uint256) public _countsSnapshots;

    /// @dev reference to the Aave governance contract to call (if initialized) on _beforeTokenTransfer
    /// !!! IMPORTANT The Aave governance is considered a trustable contract, being its responsibility
    /// to control all potential reentrancies by calling back the AaveToken
    ITransferHook public _aaveGovernance;

    bytes32 public DOMAIN_SEPARATOR;
    bytes public constant EIP712_REVISION = bytes("1");
    bytes32 internal constant EIP712_DOMAIN = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    event SnapshotDone(address owner, uint128 oldValue, uint128 newValue);

    constructor() ERC20(NAME, SYMBOL) public {}

    /**
    * @dev initializes the contract upon assignment to the InitializableAdminUpgradeabilityProxy
    * @param migrator the address of the LEND -> AAVE migration contract
    * @param distributor the address of the AAVE distribution contract
    */
    function initialize(
        address migrator,
        address distributor,
        ITransferHook aaveGovernance
    ) external initializer {

        uint256 chainId;

        //solium-disable-next-line
        assembly {
            chainId := chainid()
        }

        DOMAIN_SEPARATOR = keccak256(abi.encode(
            EIP712_DOMAIN,
            keccak256(bytes(NAME)),
            keccak256(EIP712_REVISION),
            chainId,
            address(this)
        ));
        _name = NAME;
        _symbol = SYMBOL;
        _setupDecimals(DECIMALS);
        _aaveGovernance = aaveGovernance;
        _mint(migrator, MIGRATION_AMOUNT);
        _mint(distributor, DISTRIBUTION_AMOUNT);
    }

    /**
    * @dev implements the permit function as for https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
    * @param owner the owner of the funds
    * @param spender the spender
    * @param value the amount
    * @param deadline the deadline timestamp, type(uint256).max for no deadline
    * @param v signature param
    * @param s signature param
    * @param r signature param
    */

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external {
        require(owner != address(0), "INVALID_OWNER");
        //solium-disable-next-line
        require(block.timestamp <= deadline, "INVALID_EXPIRATION");
        uint256 currentValidNonce = _nonces[owner];
        bytes32 digest = keccak256(
                abi.encodePacked(
                    "\x19\x01",
                    DOMAIN_SEPARATOR,
                    keccak256(
                        abi.encode(PERMIT_TYPEHASH, owner, spender, value, currentValidNonce, deadline))
                    )
        );

        require(owner == ecrecover(digest, v, r, s), "INVALID_SIGNATURE");
        _nonces[owner] = currentValidNonce.add(1);
        _approve(owner, spender, value);
    }

    /**
    * @dev returns the revision of the implementation contract
    */
    function getRevision() internal pure override returns (uint256) {
        return REVISION;
    }

    /**
    * @dev Writes a snapshot for an owner of tokens
    * @param owner The owner of the tokens
    * @param oldValue The value before the operation that is gonna be executed after the snapshot
    * @param newValue The value after the operation
    */
    function _writeSnapshot(address owner, uint128 oldValue, uint128 newValue) internal {
        uint128 currentBlock = uint128(block.number);

        uint256 ownerCountOfSnapshots = _countsSnapshots[owner];
        mapping (uint256 => Snapshot) storage snapshotsOwner = _snapshots[owner];

        // Doing multiple operations in the same block
        if (ownerCountOfSnapshots != 0 && snapshotsOwner[ownerCountOfSnapshots.sub(1)].blockNumber == currentBlock) {
            snapshotsOwner[ownerCountOfSnapshots.sub(1)].value = newValue;
        } else {
            snapshotsOwner[ownerCountOfSnapshots] = Snapshot(currentBlock, newValue);
            _countsSnapshots[owner] = ownerCountOfSnapshots.add(1);
        }

        emit SnapshotDone(owner, oldValue, newValue);
    }

    /**
    * @dev Writes a snapshot before any operation involving transfer of value: _transfer, _mint and _burn
    * - On _transfer, it writes snapshots for both "from" and "to"
    * - On _mint, only for _to
    * - On _burn, only for _from
    * @param from the from address
    * @param to the to address
    * @param amount the amount to transfer
    */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal override {
        if (from == to) {
            return;
        }

        if (from != address(0)) {
            uint256 fromBalance = balanceOf(from);
            _writeSnapshot(from, uint128(fromBalance), uint128(fromBalance.sub(amount)));
        }
        if (to != address(0)) {
            uint256 toBalance = balanceOf(to);
            _writeSnapshot(to, uint128(toBalance), uint128(toBalance.add(amount)));
        }

        // caching the aave governance address to avoid multiple state loads
        ITransferHook aaveGovernance = _aaveGovernance;
        if (aaveGovernance != ITransferHook(0)) {
            aaveGovernance.onTransfer(from, to, amount);
        }
    }
}

File 15 of 19 : VersionedInitializable.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

/**
 * @title VersionedInitializable
 *
 * @dev Helper contract to support initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 *
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 */
abstract contract VersionedInitializable {
    /**
   * @dev Indicates that the contract has been initialized.
   */
    uint256 internal lastInitializedRevision = 0;

   /**
   * @dev Modifier to use in the initializer function of a contract.
   */
    modifier initializer() {
        uint256 revision = getRevision();
        require(revision > lastInitializedRevision, "Contract instance has already been initialized");

        lastInitializedRevision = revision;

        _;

    }

    /// @dev returns the revision number of the contract.
    /// Needs to be defined in the inherited class as a constant.
    function getRevision() internal pure virtual returns(uint256);


    // Reserved storage space to allow for layout changes in the future.
    uint256[50] private ______gap;
}

File 16 of 19 : LendToAaveMigrator.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {IERC20} from "../interfaces/IERC20.sol";
import {SafeMath} from "../open-zeppelin/SafeMath.sol";
import {VersionedInitializable} from "../utils/VersionedInitializable.sol";


/**
* @title LendToAaveMigrator
* @notice This contract implements the migration from LEND to AAVE token
* @author Aave 
*/
contract LendToAaveMigrator is VersionedInitializable {
    using SafeMath for uint256;

    IERC20 public immutable AAVE;
    IERC20 public immutable LEND;
    uint256 public immutable LEND_AAVE_RATIO;
    uint256 public constant REVISION = 1;
    
    uint256 public _totalLendMigrated;

    /**
    * @dev emitted on migration
    * @param sender the caller of the migration
    * @param amount the amount being migrated
    */
    event LendMigrated(address indexed sender, uint256 indexed amount);

    /**
    * @param aave the address of the AAVE token
    * @param lend the address of the LEND token
    * @param lendAaveRatio the exchange rate between LEND and AAVE 
     */
    constructor(IERC20 aave, IERC20 lend, uint256 lendAaveRatio) public {
        AAVE = aave;
        LEND = lend;
        LEND_AAVE_RATIO = lendAaveRatio;
    }

    /**
    * @dev initializes the implementation
    */
    function initialize() public initializer {
    }

    /**
    * @dev returns true if the migration started
    */
    function migrationStarted() external view returns(bool) {
        return lastInitializedRevision != 0;
    }


    /**
    * @dev executes the migration from LEND to AAVE. Users need to give allowance to this contract to transfer LEND before executing
    * this transaction.
    * @param amount the amount of LEND to be migrated
    */
    function migrateFromLEND(uint256 amount) external {
        require(lastInitializedRevision != 0, "MIGRATION_NOT_STARTED");

        _totalLendMigrated = _totalLendMigrated.add(amount);
        LEND.transferFrom(msg.sender, address(this), amount);
        AAVE.transfer(msg.sender, amount.div(LEND_AAVE_RATIO));
        emit LendMigrated(msg.sender, amount);
    }

    /**
    * @dev returns the implementation revision
    * @return the implementation revision
    */
    function getRevision() internal pure override returns (uint256) {
        return REVISION;
    }

}

File 17 of 19 : DoubleTransferHelper.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import "../interfaces/IERC20.sol";

contract DoubleTransferHelper {

    IERC20 public immutable AAVE;

    constructor(IERC20 aave) public {
        AAVE = aave;
    }

    function doubleSend(address to, uint256 amount1, uint256 amount2) external {
        AAVE.transfer(to, amount1);
        AAVE.transfer(to, amount2);
    }
}

File 18 of 19 : MintableErc20.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import "../open-zeppelin/ERC20.sol";

/**
 * @title ERC20Mintable
 * @dev ERC20 minting logic
 */
contract MintableErc20 is ERC20 {
    constructor(string memory name, string memory symbol, uint8 decimals) ERC20(name, symbol) public {
        _setupDecimals(decimals);
    }
    /**
     * @dev Function to mint tokens
     * @param value The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(uint256 value) public returns (bool) {
        _mint(msg.sender, value);
        return true;
    }
}

File 19 of 19 : MockTransferHook.sol
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;

import {ITransferHook} from "../interfaces/ITransferHook.sol";

contract MockTransferHook is ITransferHook {
    event MockHookEvent();

    function onTransfer(address from, address to, uint256 amount) external override {
        emit MockHookEvent();
    }
}

Settings
{
  "metadata": {
    "useLiteralContent": false
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "evmVersion": "istanbul",
  "libraries": {}
}

Contract Security Audit

Contract ABI

[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"AdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"changeAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"implementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"address","name":"_admin","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"initialize","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"initialize","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"}],"name":"upgradeTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}]

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

Deployed Bytecode

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

Loading...
Loading
Loading...
Loading
[ Download: CSV Export  ]
[ Download: CSV Export  ]

A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.