Token

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

pragma solidity ^0.6.0;

import '@openzeppelin/contracts/token/ERC20/ERC20Burnable.sol';
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import './owner/Operator.sol';

contract Share is ERC20Burnable, Operator, ReentrancyGuard {
    using SafeMath for uint256;
    
    address public governance;
    address public firstBeneficiary;
    address public secondBeneficiary;
    uint256 public beneficiaryFeePercent = 0; // 2500 == 0.2500%
    
    modifier onlyGovernance() 
    {
        require(msg.sender == governance);
        _;
    }
    
    constructor(address _governance) public ERC20('YFLink Synthetic', 'sYFL') 
    {
        governance = _governance;
        
        _mint(msg.sender, 1500 * 10**18);
        _mint(governance, 2500000 * 10**18);
    }

    /**
     * @notice Operator mints YFLink Synthetic to a recipient
     * @param recipient_ The address of recipient
     * @param amount_ The amount of YFLink Synthetic to mint to
     */
    function mint(address recipient_, uint256 amount_)
        public
        onlyOperator
        nonReentrant
        returns (bool)
    {
        uint256 balanceBefore = balanceOf(recipient_);
        _mint(recipient_, amount_);
        uint256 balanceAfter = balanceOf(recipient_);

        return balanceAfter > balanceBefore;
    }

    function burn(uint256 amount) 
        public 
        override 
        onlyOperator 
        nonReentrant
    {
        super.burn(amount);
    }

    function burnFrom(address account, uint256 amount)
        public
        override
        onlyOperator
        nonReentrant
    {
        super.burnFrom(account, amount);
    }
    
    function _transfer(address sender, address recipient, uint256 amount) 
        internal 
        virtual 
        override
        nonReentrant
    {
        uint256 transferAmount = amount;
        
        if(beneficiaryFeePercent != 0) {
            
            uint256 beneficiaryFeeSplit = transferAmount.mul(beneficiaryFeePercent) / 2000000; // Split beneficiary fee
            
            if(firstBeneficiary != address(0)) {
                
                transferAmount = transferAmount.sub(beneficiaryFeeSplit);
                super._transfer(sender, firstBeneficiary, beneficiaryFeeSplit);
            }
            
            if(secondBeneficiary != address(0)) {
                
                transferAmount = transferAmount.sub(beneficiaryFeeSplit);
                super._transfer(sender, secondBeneficiary, beneficiaryFeeSplit);
            }
        }
        
        super._transfer(sender, recipient, transferAmount);
    }
    
    function setBeneficiaryFeePercent(uint256 _beneficiaryFeePercent) 
        external  
        onlyGovernance 
    {
        // max 1%
        require(_beneficiaryFeePercent <= 10000, "Beneficiary Fee Percentage: too high");
        beneficiaryFeePercent = _beneficiaryFeePercent;
    }
    
    function setFirstBeneficiary(address _beneficiary) 
        external  
        onlyGovernance 
    {
        firstBeneficiary = _beneficiary;
    }
    
    function setSecondBeneficiary(address _beneficiary) 
        external  
        onlyGovernance 
    {
        secondBeneficiary = _beneficiary;
    }
}

pragma solidity ^0.6.0;

import '@openzeppelin/contracts/GSN/Context.sol';
import '@openzeppelin/contracts/access/Ownable.sol';

contract Operator is Context, Ownable {
    address private _operator;

    event OperatorTransferred(
        address indexed previousOperator,
        address indexed newOperator
    );

    constructor() internal {
        _operator = _msgSender();
        emit OperatorTransferred(address(0), _operator);
    }

    function operator() public view returns (address) {
        return _operator;
    }

    modifier onlyOperator() {
        require(
            _operator == msg.sender,
            'operator: caller is not the operator'
        );
        _;
    }

    function isOperator() public view returns (bool) {
        return _msgSender() == _operator;
    }

    function transferOperator(address newOperator_) public onlyOwner {
        _transferOperator(newOperator_);
    }

    function _transferOperator(address newOperator_) internal {
        require(
            newOperator_ != address(0),
            'operator: zero address given for new operator'
        );
        emit OperatorTransferred(address(0), newOperator_);
        _operator = newOperator_;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../../GSN/Context.sol";
import "./ERC20.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

{
  "remappings": [],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_governance","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOperator","type":"address"},{"indexed":true,"internalType":"address","name":"newOperator","type":"address"}],"name":"OperatorTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"beneficiaryFeePercent","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"firstBeneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"governance","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isOperator","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient_","type":"address"},{"internalType":"uint256","name":"amount_","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"secondBeneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_beneficiaryFeePercent","type":"uint256"}],"name":"setBeneficiaryFeePercent","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_beneficiary","type":"address"}],"name":"setFirstBeneficiary","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_beneficiary","type":"address"}],"name":"setSecondBeneficiary","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOperator_","type":"address"}],"name":"transferOperator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000f5e98e173fff3ac878803949c0da4a5e65dd24df

-----Decoded View---------------
Arg [0] : _governance (address): 0xF5e98E173fFF3AC878803949c0Da4A5e65DD24df

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000f5e98e173fff3ac878803949c0da4a5e65dd24df