Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import { ERC20Rebasable } from "src/ERC20Rebasable.sol";
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import { IStake } from "src/interfaces/IStake.sol";
import { IPonzioTheCat } from "src/interfaces/IPonzioTheCat.sol";
import { IERC20Rebasable } from "src/interfaces/IERC20Rebasable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IUniswapV2Pair } from "src/interfaces/UniswapV2/IUniswapV2Pair.sol";
import { IERC20Permit } from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";

/**
 * @title PonzioTheCat
 * @notice Implementation of the PONZIO token.
 * @dev PONZIO is a rebasable token, which means that the total supply can be updated. Its particularity is that
 * every 4 days the supply is divided by 2, and in between the supply is constantly decreasing linearly. The balances
 * stays fixed for 34 minutes. Then every 34 minutes, the supply is updated, and the balances are updated
 * proportionally.
 * At each rebase, 13.37% of the debased supply is sent to the feesCollector.
 */
contract PonzioTheCat is IPonzioTheCat, ERC20Rebasable, Ownable {
    using Math for uint256;
    using SafeCast for uint256;
    using SafeERC20 for IERC20;

    /// @notice The name of the token
    string internal constant NAME = "Ponzio The Cat";
    /// @notice The symbol of the token
    string internal constant SYMBOL = "Ponzio";
    /// @notice The number of decimals of the token
    uint8 internal constant DECIMALS = 18;

    /// @inheritdoc IPonzioTheCat
    uint256 public constant INITIAL_SUPPLY = 21_000_000 * 10 ** DECIMALS; // in wei
    /// @inheritdoc IPonzioTheCat
    uint256 public constant HALVING_EVERY = 4 days + 144 seconds; // needs a factor of 168 between DEBASE_EVERY and
        // HALVING_EVERY
    /// @inheritdoc IPonzioTheCat
    uint256 public constant DEBASE_EVERY = 34 minutes + 18 seconds;
    /// @inheritdoc IPonzioTheCat
    uint256 public constant NB_DEBASE_PER_HALVING = HALVING_EVERY / DEBASE_EVERY;
    /// @inheritdoc IPonzioTheCat
    uint256 public constant MINIMUM_TOTAL_SUPPLY = 10 ** 12; // in wei
    /// @inheritdoc IPonzioTheCat
    uint256 public immutable DEPLOYED_TIME;

    /// @inheritdoc IPonzioTheCat
    uint256 public constant FEES_STAKING = 1337; // in BPS = 13.37%
    /// @inheritdoc IPonzioTheCat
    uint256 public constant FEES_BASE = 10_000; // in BPS

    /// @notice the address of the fees collector
    address internal _feesCollector;
    /// @notice boolean used to check if fees are collected
    bool internal _maxSharesReached = false;

    /// @notice the Uniswap V2 pair address
    IUniswapV2Pair internal _uniswapV2Pair;
    /// @notice true if the contract has been initialized
    bool private _initialized = false;

    /// @notice the total supply at the last update
    uint216 private _previousTotalSupply;
    /// @notice the timestamp of the last update
    uint40 private _previousUpdateTimestamp;

    constructor() ERC20Rebasable(NAME, SYMBOL, INITIAL_SUPPLY) Ownable(msg.sender) {
        DEPLOYED_TIME = block.timestamp;
        _previousTotalSupply = uint216(INITIAL_SUPPLY);
        _previousUpdateTimestamp = uint40(block.timestamp);
    }

    /* -------------------------------------------------------------------------- */
    /*                             external functions                             */
    /* -------------------------------------------------------------------------- */

    /// @inheritdoc IPonzioTheCat
    function feesCollector() external view returns (address) {
        return _feesCollector;
    }

    /// @inheritdoc IPonzioTheCat
    function maxSharesReached() external view returns (bool) {
        return _maxSharesReached;
    }

    /// @inheritdoc IPonzioTheCat
    function uniswapV2Pair() external view returns (IUniswapV2Pair) {
        return _uniswapV2Pair;
    }

    /// @inheritdoc IPonzioTheCat
    function setUniswapV2Pair(address uniV2PoolAddr) external onlyOwner {
        _uniswapV2Pair = IUniswapV2Pair(uniV2PoolAddr);
        emit UniV2PoolPairSet(uniV2PoolAddr);
    }

    /// @inheritdoc IPonzioTheCat
    function setFeesCollector(address feeCollector) external onlyOwner {
        if (!_initialized) {
            revert PONZIO_notInitialized();
        } else if (feeCollector == address(0)) {
            revert PONZIO_feeCollectorZeroAddress();
        }
        updateTotalSupply();
        _feesCollector = feeCollector;

        emit FeesCollectorSet(feeCollector);
    }

    /// @inheritdoc IPonzioTheCat
    function setBlacklistForUpdateSupply(address addrToBlacklist, bool value) external onlyOwner {
        _blacklistForUpdateSupply[addrToBlacklist] = value;

        emit BlacklistForUpdateSupplySet(addrToBlacklist, value);
    }

    /// @inheritdoc IPonzioTheCat
    function initialize(address feeCollector, address uniV2PoolAddr) external onlyOwner {
        if (_initialized) {
            revert PONZIO_alreadyInitialized();
        }
        if (feeCollector == address(0)) {
            revert PONZIO_feeCollectorZeroAddress();
        }

        _initialized = true;

        _uniswapV2Pair = IUniswapV2Pair(uniV2PoolAddr);
        emit UniV2PoolPairSet(uniV2PoolAddr);

        _blacklistForUpdateSupply[uniV2PoolAddr] = true;
        emit BlacklistForUpdateSupplySet(uniV2PoolAddr, true);

        _feesCollector = feeCollector;
        emit FeesCollectorSet(feeCollector);
    }

    /// @inheritdoc IPonzioTheCat
    function realBalanceOf(address account) external view returns (uint256 balance_) {
        (uint256 newTotalShares, uint256 newTotalSupply,) = computeNewState();

        balance_ = sharesToToken(_sharesOf[account], newTotalShares, newTotalSupply);
    }

    /* -------------------------------------------------------------------------- */
    /*                              public functions                              */
    /* -------------------------------------------------------------------------- */

    /// @inheritdoc ERC20Rebasable
    function updateTotalSupply() public override(ERC20Rebasable, IERC20Rebasable) {
        if (_previousUpdateTimestamp == uint40(block.timestamp)) {
            return;
        }

        (uint256 newTotalSupply, uint256 fees) = computeSupply();
        address feeCollector = _feesCollector;

        // fees are proportional to (_previousTotalSupply - newTotalSupply),
        // so if fees == 0 then we can be sure that _previousTotalSupply == newTotalSupply
        // we then only need to update the total supply if fees != 0
        if (fees != 0 && feeCollector != address(0)) {
            // If max shares are reached, the new total supply is the
            // minimum total supply so this assignment is still valid.
            uint256 oldTotalSupply = _previousTotalSupply;
            _previousTotalSupply = newTotalSupply.toUint216();
            _previousUpdateTimestamp = uint40(block.timestamp);

            // We need to mint tokenAmount of tokens, but by minting this amount, we will influence the totalShares.
            // For this reason, sharesToToken() cannot be used. In the end, the following 2 equations have to be
            // resolved:
            //
            // new_totalShares = old_totalShares + shareToMint
            // tokenAmount = totalSupply * shareToMint / new_totalShares
            //
            // tokenAmount, totalSupply and old_totalShares are known.
            // The only unknown is shareToMint
            //
            // After resolution we have: shareToMint = totalShares * tokenAmount / (totalSupply - tokenAmount)
            uint256 oldTotalShares = _totalShares;
            if (fees >= newTotalSupply) {
                _mintShares(feeCollector, oldTotalShares);
            } else {
                _mintShares(feeCollector, oldTotalShares.mulDiv(fees, newTotalSupply - fees));
            }

            emit TotalSupplyUpdated(oldTotalSupply, newTotalSupply, oldTotalShares, _totalShares, fees);

            /// @dev This check prevents revert in case the feesCollector is an EOA
            if (address(feeCollector).code.length != 0) {
                /// @dev This try/catch prevents revert in case of feesCollector does not implement sync()
                try IStake(feeCollector).sync() { } catch { }
            }

            _uniswapV2Pair.sync();
        }
    }

    /// @inheritdoc IPonzioTheCat
    function computeSupply() public view returns (uint256 totalSupply_, uint256 fees_) {
        uint256 previousTotalSupply = _previousTotalSupply;

        // early return if max shares are reached
        if (_maxSharesReached) {
            return (previousTotalSupply, 0);
        }

        uint256 previousUpdateTimestamp = _previousUpdateTimestamp;

        if (previousTotalSupply != MINIMUM_TOTAL_SUPPLY) {
            uint256 _timeSinceDeploy = block.timestamp - DEPLOYED_TIME;
            uint256 _tsLastHalving = INITIAL_SUPPLY / (2 ** (_timeSinceDeploy / HALVING_EVERY));

            // slither-disable-next-line weak-prng
            totalSupply_ = _tsLastHalving
                - (_tsLastHalving * ((_timeSinceDeploy % HALVING_EVERY) / DEBASE_EVERY)) / NB_DEBASE_PER_HALVING / 2;

            if (totalSupply_ < MINIMUM_TOTAL_SUPPLY) {
                totalSupply_ = MINIMUM_TOTAL_SUPPLY;
            }

            fees_ = ((previousTotalSupply - totalSupply_) * FEES_STAKING) / FEES_BASE;
        } else {
            totalSupply_ = MINIMUM_TOTAL_SUPPLY;

            if (block.timestamp - previousUpdateTimestamp < HALVING_EVERY) {
                fees_ = (MINIMUM_TOTAL_SUPPLY * FEES_STAKING * (block.timestamp - previousUpdateTimestamp))
                    / HALVING_EVERY / FEES_BASE;
            } else {
                fees_ = (MINIMUM_TOTAL_SUPPLY * FEES_STAKING) / FEES_BASE;
            }
        }
    }

    /// @inheritdoc IPonzioTheCat
    function computeNewState() public view returns (uint256 totalShares_, uint256 totalSupply_, uint256 fees_) {
        uint256 totalShares = _totalShares;
        (totalSupply_, fees_) = computeSupply();

        uint256 newShares;
        if (fees_ >= totalSupply_) {
            // if fees are greater than the total supply, we mint totalShares of shares, so we double the supply of the
            // shares, the fees will be equal to half of the total supply
            newShares = totalShares;
            fees_ = totalSupply_ / 2;
        } else {
            newShares = totalShares.mulDiv(fees_, totalSupply_ - fees_);
        }

        bool success;
        (success, totalShares_) = totalShares.tryAdd(newShares);
        if (!success) {
            totalShares_ = type(uint256).max;
            fees_ = sharesToToken((type(uint256).max - totalShares), totalShares_, totalSupply_);
        }
    }

    /// @inheritdoc IERC20
    function balanceOf(address account) public view override(ERC20Rebasable, IERC20) returns (uint256) {
        return _sharesOf[account].mulDiv(_previousTotalSupply, _totalShares);
    }

    /// @inheritdoc IERC20Permit
    function nonces(address owner) public view override(ERC20Rebasable, IERC20Permit) returns (uint256) {
        return super.nonces(owner);
    }

    /// @inheritdoc IERC20
    function totalSupply() public view override(ERC20, IERC20) returns (uint256) {
        return _previousTotalSupply;
    }

    /* -------------------------------------------------------------------------- */
    /*                             internal functions                             */
    /* -------------------------------------------------------------------------- */

    /**
     * @notice Mint shares to an account.
     * @param account The account to mint the shares to.
     * @param shares The number of shares to mint.
     */
    function _mintShares(address account, uint256 shares) internal override {
        uint256 totalShares = _totalShares;
        (bool success,) = totalShares.tryAdd(shares);

        if (!success) {
            super._mintShares(account, type(uint256).max - totalShares);
            _maxSharesReached = true;
            emit MaxSharesReached(block.timestamp);
        } else {
            super._mintShares(account, shares);
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { ERC20Permit } from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";

import { IERC20Rebasable } from "src/interfaces/IERC20Rebasable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC20Permit } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";

/**
 * @title ERC20Rebasable
 * @dev This abstract contract is an extension of the ERC20 contract that allows for rebasing of the token supply.
 */
abstract contract ERC20Rebasable is ERC20Permit, IERC20Rebasable {
    using Math for uint256;

    /**
     * @notice the total supply is redefined over time. Each user has a share of the total supply.
     * @dev balanceOf(user) = sharesOf[user] * totalSupply() / totalShare
     */
    mapping(address => uint256) internal _sharesOf;

    /// @dev total shares of the contract
    uint256 internal _totalShares;

    /// @dev blacklist for addresses that should not trigger a total supply update
    mapping(address => bool) internal _blacklistForUpdateSupply;

    /// @inheritdoc IERC20Rebasable
    uint256 public constant SHARES_PRECISION_FACTOR = 1e3;

    constructor(string memory name, string memory symbol, uint256 initialSupply)
        ERC20(name, symbol)
        ERC20Permit(name)
    {
        _sharesOf[msg.sender] = initialSupply * SHARES_PRECISION_FACTOR;
        _totalShares = initialSupply * SHARES_PRECISION_FACTOR;
    }

    /* -------------------------------------------------------------------------- */
    /*                             external functions                             */
    /* -------------------------------------------------------------------------- */

    /// @inheritdoc IERC20Rebasable
    function totalShares() external view override returns (uint256) {
        return _totalShares;
    }

    /// @inheritdoc IERC20Rebasable
    function sharesOf(address user) external view returns (uint256) {
        return _sharesOf[user];
    }

    /// @inheritdoc IERC20Rebasable
    function transferShares(address to, uint256 shares) external returns (bool) {
        return _transferShares(msg.sender, to, shares, sharesToToken(shares));
    }

    /// @inheritdoc IERC20Rebasable
    function transferSharesFrom(address from, address to, uint256 shares) external returns (bool) {
        // round up the token amount to decrease the allowance in all cases
        uint256 tokenAmount = _sharesToTokenUp(shares);

        if (tokenAmount == 0 && shares > 0) {
            tokenAmount += 1;
        }

        _spendAllowance(from, msg.sender, tokenAmount);

        return _transferShares(from, to, shares, tokenAmount);
    }

    /// @inheritdoc IERC20Rebasable
    function updateTotalSupply() external virtual;

    /* -------------------------------------------------------------------------- */
    /*                              public functions                              */
    /* -------------------------------------------------------------------------- */

    /// @inheritdoc IERC20Permit
    function nonces(address owner) public view virtual override(ERC20Permit, IERC20Permit) returns (uint256) {
        return super.nonces(owner);
    }

    /// @inheritdoc IERC20
    function balanceOf(address account) public view virtual override(ERC20, IERC20) returns (uint256) {
        return sharesToToken(_sharesOf[account]);
    }

    /// @inheritdoc IERC20Rebasable
    function tokenToShares(uint256 amount) public view returns (uint256) {
        return tokenToShares(amount, _totalShares, totalSupply());
    }

    /// @inheritdoc IERC20Rebasable
    function tokenToShares(uint256 amount, uint256 newTotalShares, uint256 newTotalSupply)
        public
        pure
        returns (uint256)
    {
        return amount.mulDiv(newTotalShares, newTotalSupply);
    }

    /// @inheritdoc IERC20Rebasable
    function sharesToToken(uint256 shares) public view returns (uint256 tokenAmount_) {
        tokenAmount_ = sharesToToken(shares, _totalShares, totalSupply());
    }

    /// @inheritdoc IERC20Rebasable
    function sharesToToken(uint256 shares, uint256 newTotalShares, uint256 newTotalSupply)
        public
        pure
        returns (uint256 tokenAmount_)
    {
        // we round down to be conservative
        tokenAmount_ = shares.mulDiv(newTotalSupply, newTotalShares);
    }

    /* -------------------------------------------------------------------------- */
    /*                             internal functions                             */
    /* -------------------------------------------------------------------------- */

    /**
     * @notice Transfer tokens to a specified address by specifying the amount of shares.
     * @param from The address to transfer the tokens from.
     * @param to The address to transfer the tokens to.
     * @param shareAmount The amount of shares to be transferred.
     * @param tokenAmount The amount of token corresponding to the amount of shares (not verified, used for events)
     * @return True if the transfer was successful, revert otherwise.
     * @dev this function updates the total supply by calling `updateTotalSupply()`
     */
    function _transferShares(address from, address to, uint256 shareAmount, uint256 tokenAmount)
        internal
        returns (bool)
    {
        if (from == address(0)) {
            revert ERC20InvalidSender(from);
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(to);
        }
        if (shareAmount > _sharesOf[from]) {
            revert ERC20InsufficientBalance(from, sharesToToken(_sharesOf[from]), tokenAmount);
        }

        if (
            !_blacklistForUpdateSupply[from] && !_blacklistForUpdateSupply[to] && !_blacklistForUpdateSupply[msg.sender]
        ) {
            // slither-disable-next-line reentrancy-no-eth
            try this.updateTotalSupply() { } catch { }
        }

        _sharesOf[from] -= shareAmount;
        _sharesOf[to] += shareAmount;

        emit Transfer(from, to, tokenAmount);
        return true;
    }

    /**
     * @inheritdoc ERC20
     * @dev mint and burn will revert, use _mintShares for that, or modify the totalSupply
     */
    function _update(address from, address to, uint256 value) internal override {
        _transferShares(from, to, tokenToShares(value), value);
    }

    /// @inheritdoc ERC20
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal override {
        try this.updateTotalSupply() { } catch { }
        super._approve(owner, spender, value, emitEvent);
    }

    /**
     * @notice Mint shares to an account.
     * @param account The account to mint the shares to.
     * @param shares The number of shares to mint.
     */
    function _mintShares(address account, uint256 shares) internal virtual {
        _sharesOf[account] += shares;
        _totalShares += shares;
    }

    function _sharesToTokenUp(uint256 shares) internal view returns (uint256 tokenAmount_) {
        tokenAmount_ = shares.mulDiv(totalSupply(), _totalShares, Math.Rounding.Ceil);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import { IPonzioTheCat } from "src/interfaces/IPonzioTheCat.sol";
import { IWrappedPonzioTheCat } from "src/interfaces/IWrappedPonzioTheCat.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IStake {
    /**
     * @notice Information about each staker's balance and reward debt.
     * @param amount staked amount
     * @param rewardDebt reward debt of the user used to calculate the pending rewards
     */
    struct UserInfo {
        uint256 amount;
        uint256 rewardDebt;
    }

    /**
     * @notice Emitted when a user deposits LP tokens to the contract.
     * @param recipient address of the recipient
     * @param depositBy address of the msg.sender
     * @param amount amount of deposited tokens
     */
    event Deposit(address indexed recipient, address depositBy, uint256 amount);

    /**
     * @notice Emitted when a user withdraws LP tokens from the contract.
     * @param user address of the user
     * @param recipient address of the recipient
     * @param amount amount of withdrawn tokens
     */
    event Withdraw(address indexed user, address recipient, uint256 amount);

    /**
     * @notice Emitted when a user claims rewards from the contract.
     * @param user address of the user
     * @param recipient address of the recipient
     * @param reward amount of claimed tokens
     */
    event ClaimReward(address indexed user, address recipient, uint256 reward);

    /**
     * @notice Emitted when a user forces the withdrawal of LP tokens from the contract.
     * @param user address of the user
     * @param amount amount of withdrawn LP tokens
     */
    event EmergencyWithdraw(address indexed user, uint256 amount);

    /**
     * @notice Emitted when the contract is skimmed.
     * @param user address of the user
     * @param amount amount of skimmed lp tokens
     */
    event Skim(address indexed user, uint256 amount);

    /// @notice Reverted when the user tries to deposit an amount of 0 tokens.
    error Stake_depositZeroAmount();

    /// @notice Reverted when the user tries to withdraw an amount of 0 tokens.
    error Stake_withdrawZeroAmount();

    /// @notice Revert when the refund fails.
    error Stake_refundFailed();

    /// @notice Revert when the refund fails.
    error Stake_noPendingRewards();

    /// @notice Revert when no value was added to the transaction but it was needed
    error Stake_valueNeeded();

    /**
     * @notice Revert when the user tries to withdraw an amount higher than the staked amount.
     * @param withdrawAmount amount the user tries to withdraw
     * @param stakedAmount amount the user has staked
     */
    error Stake_withdrawTooHigh(uint256 withdrawAmount, uint256 stakedAmount);

    /**
     * @notice Returns the address of the staking token.
     * @return IERC20 address of the staking token
     */
    function LP_TOKEN() external view returns (IERC20);

    /**
     * @notice Returns the address of the Ponzio.
     * @return IPonzioTheCat address of the Ponzio
     */
    function PONZIO() external view returns (IPonzioTheCat);

    /**
     * @notice Returns the address of the Ponzio token vault.
     * @return IWrappedPonzioTheCat address of the Ponzio token vault
     */
    function WRAPPED_PONZIO() external view returns (IWrappedPonzioTheCat);

    /**
     * @notice Returns the staked amount and the reward debt of a user.
     * @param user address of the user
     * @return struct containing the user's staked amount and reward debt
     */
    function userInfo(address user) external view returns (UserInfo memory);

    /**
     * @notice Returns the precision factor used to compute the reward per share.
     * @return The precision factor.
     */
    function PRECISION_FACTOR() external view returns (uint256);

    /**
     * @notice Reinvests the user's rewards by adding liquidity to the Uniswap pair and staking the LP tokens.
     * @param amountPonzioMin The minimum amount of Ponzio tokens the user wants to add as liquidity.
     * @param amountEthMin The minimum amount of ETH the user wants to add as liquidity.
     *
     * This function first harvests the user's rewards.
     *
     * It then adds liquidity to the Uniswap pair with the harvested rewards and the ETH sent by the user. The LP
     * tokens received from adding liquidity are then staked.
     *
     * If there are any ETH or Ponzio tokens left in the contract, they are sent back to the user.
     *
     * Requirement:
     * - The `msg.value` (amount of ETH sent) must not be zero.
     */
    function reinvest(uint256 amountPonzioMin, uint256 amountEthMin) external payable;

    /**
     * @notice Returns the reward amount that a user has pending to claim.
     * @param userAddr address of the user
     * @return rewards_ amount of pending rewards
     */
    function pendingRewards(address userAddr) external view returns (uint256 rewards_);

    /**
     * @notice Deposits staking tokens to the contract.
     * @param amount amount of staking tokens to deposit
     * @param recipient address of the recipient
     */
    function deposit(uint256 amount, address recipient) external;

    /**
     * @notice Withdraws staking tokens from the contract.
     * @param amount amount of staking tokens to withdraw
     * @param recipient address of the recipient
     */
    function withdraw(uint256 amount, address recipient) external;

    /**
     * @notice Updates the pool and sends the pending reward amount of msg.sender.
     * @param recipient address of the recipient
     */
    function harvest(address recipient) external;

    /**
     * @notice Convert all rewards to vault tokens
     * @dev Only call the vault if the balance is not zero
     */
    function sync() external;

    /**
     * @notice Function to force the withdrawal of LP tokens from the contract.
     * @dev This function is used to withdraw the LP tokens in case of emergency.
     * It will send the LP tokens to the user without claiming the rewards.
     */
    function emergencyWithdraw() external;

    /**
     * @notice Function to skim any excess lp tokens sent to the contract.
     * @dev Receiver is msg.sender
     */
    function skim() external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import { IERC20Rebasable } from "src/interfaces/IERC20Rebasable.sol";
import { IUniswapV2Pair } from "src/interfaces/UniswapV2/IUniswapV2Pair.sol";

interface IPonzioTheCat is IERC20Rebasable {
    /// @notice Error code is thrown when the contract is being initialized a 2nd time.
    error PONZIO_alreadyInitialized();

    /// @notice Error code thrown in setFeesCollector when the contract has not been initialized yet.
    error PONZIO_notInitialized();

    /// @notice Error code thrown in setFeesCollector when the new feesCollector is the zero address.
    error PONZIO_feeCollectorZeroAddress();

    /**
     * @notice Emitted when the max shares are reached.
     * @param timestamp The timestamp at which the maximum is reached.
     */
    event MaxSharesReached(uint256 timestamp);

    /**
     * @notice Emitted FeesCollector changes.
     * @param feesCollector The new feesCollector.
     * It's ok to set the feesCollector to the zero address, in which case no fees will be collected.
     */
    event FeesCollectorSet(address indexed feesCollector);

    /**
     * @notice Emitted when the Uniswap V2 pair address is set.
     * @param uniV2PoolPair The new uniV2PoolPair.
     */
    event UniV2PoolPairSet(address indexed uniV2PoolPair);

    /**
     * @notice Emitted when an account is blacklisted for UpdateTotalSupply.
     * @param account The account that is blacklisted.
     * @param value The new value of the blacklist.
     */
    event BlacklistForUpdateSupplySet(address indexed account, bool indexed value);

    /**
     * @notice Emitted when the total supply is updated.
     * @param oldTotalSupply The old total supply.
     * @param newTotalSupply The new total supply.
     * @param oldTotalShare The old total share.
     * @param newTotalShare The new total share.
     * @param fees The fees collected.
     */
    event TotalSupplyUpdated(
        uint256 oldTotalSupply, uint256 newTotalSupply, uint256 oldTotalShare, uint256 newTotalShare, uint256 fees
    );

    /**
     * @notice Initial supply of the token.
     * @return The initial supply of the token.
     */
    function INITIAL_SUPPLY() external view returns (uint256);

    /**
     * @notice Time between each halving.
     * @return The time between each halving.
     */
    function HALVING_EVERY() external view returns (uint256);

    /**
     * @notice Time between each debasing.
     * @return The time between each debasing.
     */
    function DEBASE_EVERY() external view returns (uint256);

    /**
     * @notice Number of debasing per halving.
     * @return The number of debasing per halving.
     */
    function NB_DEBASE_PER_HALVING() external view returns (uint256);

    /**
     * @notice Minimum total supply. When the total supply reaches this value, it can't go lower.
     * @return The minimum total supply.
     */
    function MINIMUM_TOTAL_SUPPLY() external view returns (uint256);

    /**
     * @notice The time at which the contract was deployed.
     * @return The time at which the contract was deployed.
     */
    function DEPLOYED_TIME() external view returns (uint256);

    /**
     * @notice Fees collected on each debasing, in FEES_BASE percent.
     * @return The fees collected on each debasing.
     */
    function FEES_STAKING() external view returns (uint256);

    /**
     * @notice The fee base used for FEES_STAKING
     * @return The fee base
     */
    function FEES_BASE() external view returns (uint256);

    /**
     * @notice The address that collects the fees (the staking contract)
     * @return The address that collects the fees
     */
    function feesCollector() external view returns (address);

    /**
     * @notice returns if the max shares are reached.
     * @return True if the max shares are reached, false otherwise.
     * @dev The max shares are reached when the total of shares is about to overflow.
     * When reached, fees are not collected anymore.
     */
    function maxSharesReached() external view returns (bool);

    /**
     * @notice The Uniswap V2 pair to sync when debasing.
     * @return The Uniswap V2 pair.
     */
    function uniswapV2Pair() external view returns (IUniswapV2Pair);

    /**
     * @notice Changes the Uniswap V2 pair address.
     * @param uniV2PoolAddr_ The new Uniswap V2 pair address.
     * @dev Set the Uniswap V2 pair address to zero address to disable syncing.
     */
    function setUniswapV2Pair(address uniV2PoolAddr_) external;

    /**
     * @notice Changes the fees collector.
     * @param feesCollector_ The new fees collector.
     */
    function setFeesCollector(address feesCollector_) external;

    /**
     * @notice Blacklist an address for UpdateTotalSupply.
     * @param addrToBlacklist The address to blacklist.
     * @param value The new value of the blacklist.
     */
    function setBlacklistForUpdateSupply(address addrToBlacklist, bool value) external;

    /**
     * @notice Initialize the contract by setting the fees collector and staking the first amount of tokens.
     * @param feesCollector_ The address that will collect the fees.
     * @param uniV2PoolAddr_ The address of the uniswap V2 pool.
     */
    function initialize(address feesCollector_, address uniV2PoolAddr_) external;

    /**
     * @notice Return the real-time balance of an account after an UpdateTotalSupply() call.
     * @param account_ The account to check the balance of.
     * @return balance_ The real-time balance of the account.
     * @dev This function will only return the right balance if the feesCollector is set.
     */
    function realBalanceOf(address account_) external view returns (uint256 balance_);

    /**
     * @notice Compute the total supply and the fees to collect.
     * @return totalSupply_ The new total supply.
     * @return fees_ The fees to collect.
     */
    function computeSupply() external view returns (uint256 totalSupply_, uint256 fees_);

    /**
     * @notice Compute the total shares, supply and the fees to collect.
     * @return totalShares_ The new total shares.
     * @return totalSupply_ The new total supply.
     * @return fees_ The fees to collect.
     */
    function computeNewState() external view returns (uint256 totalShares_, uint256 totalSupply_, uint256 fees_);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC20Permit } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";

interface IERC20Rebasable is IERC20, IERC20Permit {
    /**
     * @notice returns the precision factor for shares.
     * @return The precision factor for shares.
     */
    function SHARES_PRECISION_FACTOR() external view returns (uint256);

    /**
     * @notice returns the total shares.
     * @return The total shares.
     */
    function totalShares() external view returns (uint256);

    /**
     * @notice returns the share of the user.
     * @param user The address of the user to get the share of.
     * @return The share of the user.
     */
    function sharesOf(address user) external view returns (uint256);

    /**
     * @notice Transfer tokens to a specified address by specifying the share amount.
     * @param to The address to transfer the tokens to.
     * @param shares The amount of shares to be transferred.
     * @return True if the transfer was successful, revert otherwise.
     */
    function transferShares(address to, uint256 shares) external returns (bool);

    /**
     * @notice Transfer shares from a specified address to another specified address.
     * @param from The address to transfer the shares from.
     * @param to The address to transfer the shares to.
     * @param shares The amount of shares to be transferred.
     * @return True if the transfer was successful, revert otherwise.
     * @dev This function tries to update the total supply by calling `updateTotalSupply()`
     */
    function transferSharesFrom(address from, address to, uint256 shares) external returns (bool);

    /**
     * @notice update the total supply, compute the debase accordingly and transfer the fees to the feesCollector.
     * @dev This function is already called at each approval and transfer. It needs to be implemented by a child
     * contract
     */
    function updateTotalSupply() external;

    /**
     * @notice Convert tokens to shares.
     * @param amount The amount of tokens to convert to shares.
     * @return shares_ The number of shares corresponding to the tokens.
     */
    function tokenToShares(uint256 amount) external view returns (uint256 shares_);

    /**
     * @notice Convert tokens to shares given the new total shares and total supply.
     * @param amount The amount of tokens to convert to shares.
     * @param newTotalShares The new total shares.
     * @param newTotalSupply The new total supply.
     * @return shares_ The number of shares corresponding to the tokens.
     */
    function tokenToShares(uint256 amount, uint256 newTotalShares, uint256 newTotalSupply)
        external
        view
        returns (uint256 shares_);

    /**
     * @notice Convert shares to tokens.
     * @param shares The amount of shares to convert to tokens.
     * @return tokenAmount_ The amount of tokens corresponding to the shares.
     */
    function sharesToToken(uint256 shares) external view returns (uint256 tokenAmount_);

    /**
     * @notice Convert shares to tokens given the new total shares and total supply.
     * @param shares The amount of shares to convert to tokens.
     * @param newTotalShares The new total shares.
     * @param newTotalSupply The new total supply.
     * @return tokenAmount_ The amount of tokens corresponding to the shares.
     */
    function sharesToToken(uint256 shares, uint256 newTotalShares, uint256 newTotalSupply)
        external
        view
        returns (uint256 tokenAmount_);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: Unlicense
pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint256 value);
    event Transfer(address indexed from, address indexed to, uint256 value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint256);
    function balanceOf(address owner) external view returns (uint256);
    function allowance(address owner, address spender) external view returns (uint256);

    function approve(address spender, uint256 value) external returns (bool);
    function transfer(address to, uint256 value) external returns (bool);
    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint256);

    function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
        external;

    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(address indexed sender, uint256 amount0, uint256 amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint256);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint256);
    function price1CumulativeLast() external view returns (uint256);
    function kLast() external view returns (uint256);

    function mint(address to) external returns (uint256 liquidity);
    function burn(address to) external returns (uint256 amount0, uint256 amount1);
    function swap(uint256 amount0Out, uint256 amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "./IERC20Permit.sol";
import {ERC20} from "../ERC20.sol";
import {ECDSA} from "../../../utils/cryptography/ECDSA.sol";
import {EIP712} from "../../../utils/cryptography/EIP712.sol";
import {Nonces} from "../../../utils/Nonces.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712, Nonces {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, Nonces) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import { IPonzioTheCat } from "src/interfaces/IPonzioTheCat.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IWrappedPonzioTheCat is IERC20 {
    /// @notice Returns the underlying asset of the wrapped token.
    function asset() external view returns (IPonzioTheCat);

    /**
     * @notice Returns the amount of wrapped tokens that will be minted when wrapping the underlying assets given the
     * new total shares and total supply.
     * @param assets The amount of underlying assets to be wrapped.
     * @param newTotalShares The new total shares of the wrapped token.
     * @param newTotalSupply The new total supply of the wrapped token.
     * @return amount_ The amount of wrapped tokens that will be minted.
     */
    function previewWrap(uint256 assets, uint256 newTotalShares, uint256 newTotalSupply)
        external
        view
        returns (uint256 amount_);

    /**
     * @notice Wraps the underlying assets into the wrapped token.
     * @param assets The amount of underlying assets to be wrapped.
     * @return amount_ The amount of wrapped tokens minted.
     */
    function wrap(uint256 assets) external returns (uint256 amount_);

    /**
     * @notice Wraps the underlying assets into the wrapped token and mints them to the receiver.
     * @param assets The amount of underlying assets to be wrapped.
     * @param receiver The address to which the wrapped tokens are minted.
     * @return amount_ The amount of wrapped tokens minted.
     */
    function wrap(uint256 assets, address receiver) external returns (uint256 amount_);

    /**
     * @notice Wraps the underlying shares into the wrapped token and mints them to the receiver.
     * @param shares The amount of underlying shares to be wrapped.
     * @param receiver The address to which the wrapped tokens are minted.
     * @return amount_ The amount of wrapped tokens minted.
     */
    function wrapShares(uint256 shares, address receiver) external returns (uint256 amount_);

    /**
     * @notice Returns the amount of underlying assets that will be received when unwrapping the wrapped tokens.
     * @param amount The amount of wrapped tokens to be unwrapped.
     * @return assets_ The amount of underlying assets that will be received.
     */
    function previewUnwrap(uint256 amount) external view returns (uint256 assets_);

    /**
     * @notice Returns the amount of underlying assets that will be received when unwrapping the wrapped tokens given
     * the new total shares and total supply.
     * @param amount The amount of wrapped tokens to be unwrapped.
     * @param newTotalShares The new total shares of the wrapped token.
     * @param newTotalSupply The new total supply of the wrapped token.
     * @return assets_ The amount of underlying assets that will be received.
     */
    function previewUnwrap(uint256 amount, uint256 newTotalShares, uint256 newTotalSupply)
        external
        view
        returns (uint256 assets_);

    /**
     * @notice Unwraps the wrapped tokens into the underlying assets.
     * @param amount The amount of wrapped tokens to be unwrapped.
     * @return assets_ The amount of underlying assets received.
     */
    function unwrap(uint256 amount) external returns (uint256 assets_);

    /**
     * @notice Unwraps the wrapped tokens into the underlying assets and sends them to the receiver.
     * @param amount The amount of wrapped tokens to be unwrapped.
     * @param receiver The address to which the underlying assets are sent.
     * @return assets_ The amount of underlying assets received.
     */
    function unwrap(uint256 amount, address receiver) external returns (uint256 assets_);

    /**
     * @notice Returns the amount of wrapped tokens that will be minted when wrapping the underlying assets.
     * @param assets The amount of underlying assets to be wrapped.
     * @return amount_ The amount of wrapped tokens that will be minted.
     */
    function previewWrap(uint256 assets) external view returns (uint256 amount_);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "./MessageHashUtils.sol";
import {ShortStrings, ShortString} from "../ShortStrings.sol";
import {IERC5267} from "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    mapping(address account => uint256) private _nonces;

    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return _nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "remappings": [
    "@openzeppelin/=node_modules/@openzeppelin/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[],"name":"MathOverflowedMulDiv","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"PONZIO_alreadyInitialized","type":"error"},{"inputs":[],"name":"PONZIO_feeCollectorZeroAddress","type":"error"},{"inputs":[],"name":"PONZIO_notInitialized","type":"error"},{"inputs":[{"internalType":"uint8","name":"bits","type":"uint8"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"SafeCastOverflowedUintDowncast","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"bool","name":"value","type":"bool"}],"name":"BlacklistForUpdateSupplySet","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"feesCollector","type":"address"}],"name":"FeesCollectorSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"MaxSharesReached","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"oldTotalSupply","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newTotalSupply","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"oldTotalShare","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newTotalShare","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"fees","type":"uint256"}],"name":"TotalSupplyUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"uniV2PoolPair","type":"address"}],"name":"UniV2PoolPairSet","type":"event"},{"inputs":[],"name":"DEBASE_EVERY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEPLOYED_TIME","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FEES_BASE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"FEES_STAKING","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"HALVING_EVERY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INITIAL_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINIMUM_TOTAL_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"NB_DEBASE_PER_HALVING","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SHARES_PRECISION_FACTOR","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"computeNewState","outputs":[{"internalType":"uint256","name":"totalShares_","type":"uint256"},{"internalType":"uint256","name":"totalSupply_","type":"uint256"},{"internalType":"uint256","name":"fees_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"computeSupply","outputs":[{"internalType":"uint256","name":"totalSupply_","type":"uint256"},{"internalType":"uint256","name":"fees_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"feesCollector","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"feeCollector","type":"address"},{"internalType":"address","name":"uniV2PoolAddr","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"maxSharesReached","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"realBalanceOf","outputs":[{"internalType":"uint256","name":"balance_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"addrToBlacklist","type":"address"},{"internalType":"bool","name":"value","type":"bool"}],"name":"setBlacklistForUpdateSupply","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"feeCollector","type":"address"}],"name":"setFeesCollector","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"uniV2PoolAddr","type":"address"}],"name":"setUniswapV2Pair","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"}],"name":"sharesOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"newTotalShares","type":"uint256"},{"internalType":"uint256","name":"newTotalSupply","type":"uint256"}],"name":"sharesToToken","outputs":[{"internalType":"uint256","name":"tokenAmount_","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"sharesToToken","outputs":[{"internalType":"uint256","name":"tokenAmount_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"tokenToShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"newTotalShares","type":"uint256"},{"internalType":"uint256","name":"newTotalSupply","type":"uint256"}],"name":"tokenToShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"totalShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"transferShares","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"transferSharesFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniswapV2Pair","outputs":[{"internalType":"contract IUniswapV2Pair","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"updateTotalSupply","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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