Name: MIMO Parallel Governance Token (MIMO)
Price: 0.0047 USD

Contract Source Code (Solidity)

/**
 *Submitted for verification at Etherscan.io on 2021-03-10
*/

// SPDX-License-Identifier: MIT

pragma experimental ABIEncoderV2;
pragma solidity 0.6.12;


// 
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// 
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// 
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// 
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// 
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// 
interface IGovernorAlpha {
    /// @notice Possible states that a proposal may be in
    enum ProposalState {
        Active,
        Canceled,
        Defeated,
        Succeeded,
        Queued,
        Expired,
        Executed
    }

    struct Proposal {
        // Unique id for looking up a proposal
        uint256 id;

        // Creator of the proposal
        address proposer;

        // The timestamp that the proposal will be available for execution, set once the vote succeeds
        uint256 eta;

        // the ordered list of target addresses for calls to be made
        address[] targets;

        // The ordered list of values (i.e. msg.value) to be passed to the calls to be made
        uint256[] values;

        // The ordered list of function signatures to be called
        string[] signatures;

        // The ordered list of calldata to be passed to each call
        bytes[] calldatas;

        // The timestamp at which voting begins: holders must delegate their votes prior to this timestamp
        uint256 startTime;

        // The timestamp at which voting ends: votes must be cast prior to this timestamp
        uint endTime;

        // Current number of votes in favor of this proposal
        uint256 forVotes;

        // Current number of votes in opposition to this proposal
        uint256 againstVotes;

        // Flag marking whether the proposal has been canceled
        bool canceled;

        // Flag marking whether the proposal has been executed
        bool executed;

        // Receipts of ballots for the entire set of voters
        mapping (address => Receipt) receipts;
    }

    /// @notice Ballot receipt record for a voter
    struct Receipt {
        // Whether or not a vote has been cast
        bool hasVoted;

        // Whether or not the voter supports the proposal
        bool support;

        // The number of votes the voter had, which were cast
        uint votes;
    }

    /// @notice An event emitted when a new proposal is created
    event ProposalCreated(uint256 id, address proposer, address[] targets, uint256[] values, string[] signatures, bytes[] calldatas, uint startTime, uint endTime, string description);

    /// @notice An event emitted when a vote has been cast on a proposal
    event VoteCast(address voter, uint256 proposalId, bool support, uint256 votes);

    /// @notice An event emitted when a proposal has been canceled
    event ProposalCanceled(uint256 id);

    /// @notice An event emitted when a proposal has been queued in the Timelock
    event ProposalQueued(uint256 id, uint256 eta);

    /// @notice An event emitted when a proposal has been executed in the Timelock
    event ProposalExecuted(uint256 id);

    function propose(address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas, string memory description, uint256 endTime) external returns (uint);

    function queue(uint256 proposalId) external;

    function execute(uint256 proposalId) external payable;

    function cancel(uint256 proposalId) external;

    function castVote(uint256 proposalId, bool support) external;

    function getActions(uint256 proposalId) external view returns (address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas);

    function getReceipt(uint256 proposalId, address voter) external view returns (Receipt memory);

    function state(uint proposalId) external view returns (ProposalState);

    function quorumVotes() external view returns (uint256);

    function proposalThreshold() external view returns (uint256);
}

// 
interface ITimelock {
  event NewAdmin(address indexed newAdmin);
  event NewPendingAdmin(address indexed newPendingAdmin);
  event NewDelay(uint256 indexed newDelay);
  event CancelTransaction(
    bytes32 indexed txHash,
    address indexed target,
    uint256 value,
    string signature,
    bytes data,
    uint256 eta
  );
  event ExecuteTransaction(
    bytes32 indexed txHash,
    address indexed target,
    uint256 value,
    string signature,
    bytes data,
    uint256 eta
  );
  event QueueTransaction(
    bytes32 indexed txHash,
    address indexed target,
    uint256 value,
    string signature,
    bytes data,
    uint256 eta
  );

  function acceptAdmin() external;

  function queueTransaction(
    address target,
    uint256 value,
    string calldata signature,
    bytes calldata data,
    uint256 eta
  ) external returns (bytes32);

  function cancelTransaction(
    address target,
    uint256 value,
    string calldata signature,
    bytes calldata data,
    uint256 eta
  ) external;

  function executeTransaction(
    address target,
    uint256 value,
    string calldata signature,
    bytes calldata data,
    uint256 eta
  ) external payable returns (bytes memory);

  function delay() external view returns (uint256);

  function GRACE_PERIOD() external view returns (uint256);

  function queuedTransactions(bytes32 hash) external view returns (bool);
}

// 
interface IVotingEscrow {
  enum LockAction { CREATE_LOCK, INCREASE_LOCK_AMOUNT, INCREASE_LOCK_TIME }

  struct LockedBalance {
    uint256 amount;
    uint256 end;
  }

  /** Shared Events */
  event Deposit(address indexed provider, uint256 value, uint256 locktime, LockAction indexed action, uint256 ts);
  event Withdraw(address indexed provider, uint256 value, uint256 ts);
  event Expired();

  function createLock(uint256 _value, uint256 _unlockTime) external;

  function increaseLockAmount(uint256 _value) external;

  function increaseLockLength(uint256 _unlockTime) external;

  function withdraw() external;

  function expireContract() external;

  function name() external view returns (string memory);

  function symbol() external view returns (string memory);

  function decimals() external view returns (uint256);

  function balanceOf(address _owner) external view returns (uint256);

  function balanceOfAt(address _owner, uint256 _blockTime) external view returns (uint256);

  function stakingToken() external view returns (IERC20);
}

// 
interface IAccessController {
  event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
  event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
  event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

  function grantRole(bytes32 role, address account) external;

  function revokeRole(bytes32 role, address account) external;

  function renounceRole(bytes32 role, address account) external;

  function MANAGER_ROLE() external view returns (bytes32);

  function MINTER_ROLE() external view returns (bytes32);

  function hasRole(bytes32 role, address account) external view returns (bool);

  function getRoleMemberCount(bytes32 role) external view returns (uint256);

  function getRoleMember(bytes32 role, uint256 index) external view returns (address);

  function getRoleAdmin(bytes32 role) external view returns (bytes32);
}

// 
interface ISTABLEX is IERC20 {
  function mint(address account, uint256 amount) external;

  function burn(address account, uint256 amount) external;

  function a() external view returns (IAddressProvider);
}

// 
interface AggregatorV3Interface {
  function decimals() external view returns (uint8);

  function description() external view returns (string memory);

  function version() external view returns (uint256);

  function getRoundData(uint80 _roundId)
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );

  function latestRoundData()
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
}

// 
interface IPriceFeed {
  event OracleUpdated(address indexed asset, address oracle, address sender);
  event EurOracleUpdated(address oracle, address sender);

  function setAssetOracle(address _asset, address _oracle) external;

  function setEurOracle(address _oracle) external;

  function a() external view returns (IAddressProvider);

  function assetOracles(address _asset) external view returns (AggregatorV3Interface);

  function eurOracle() external view returns (AggregatorV3Interface);

  function getAssetPrice(address _asset) external view returns (uint256);

  function convertFrom(address _asset, uint256 _amount) external view returns (uint256);

  function convertTo(address _asset, uint256 _amount) external view returns (uint256);
}

// 
interface IRatesManager {
  function a() external view returns (IAddressProvider);

  //current annualized borrow rate
  function annualizedBorrowRate(uint256 _currentBorrowRate) external pure returns (uint256);

  //uses current cumulative rate to calculate totalDebt based on baseDebt at time T0
  function calculateDebt(uint256 _baseDebt, uint256 _cumulativeRate) external pure returns (uint256);

  //uses current cumulative rate to calculate baseDebt at time T0
  function calculateBaseDebt(uint256 _debt, uint256 _cumulativeRate) external pure returns (uint256);

  //calculate a new cumulative rate
  function calculateCumulativeRate(
    uint256 _borrowRate,
    uint256 _cumulativeRate,
    uint256 _timeElapsed
  ) external view returns (uint256);
}

// 
interface ILiquidationManager {
  function a() external view returns (IAddressProvider);

  function calculateHealthFactor(
    uint256 _collateralValue,
    uint256 _vaultDebt,
    uint256 _minRatio
  ) external view returns (uint256 healthFactor);

  function liquidationBonus(address _collateralType, uint256 _amount) external view returns (uint256 bonus);

  function applyLiquidationDiscount(address _collateralType, uint256 _amount)
    external
    view
    returns (uint256 discountedAmount);

  function isHealthy(
    uint256 _collateralValue,
    uint256 _vaultDebt,
    uint256 _minRatio
  ) external view returns (bool);
}

// 
interface IVaultsDataProvider {
  struct Vault {
    // borrowedType support USDX / PAR
    address collateralType;
    address owner;
    uint256 collateralBalance;
    uint256 baseDebt;
    uint256 createdAt;
  }

  //Write
  function createVault(address _collateralType, address _owner) external returns (uint256);

  function setCollateralBalance(uint256 _id, uint256 _balance) external;

  function setBaseDebt(uint256 _id, uint256 _newBaseDebt) external;

  // Read
  function a() external view returns (IAddressProvider);

  function baseDebt(address _collateralType) external view returns (uint256);

  function vaultCount() external view returns (uint256);

  function vaults(uint256 _id) external view returns (Vault memory);

  function vaultOwner(uint256 _id) external view returns (address);

  function vaultCollateralType(uint256 _id) external view returns (address);

  function vaultCollateralBalance(uint256 _id) external view returns (uint256);

  function vaultBaseDebt(uint256 _id) external view returns (uint256);

  function vaultId(address _collateralType, address _owner) external view returns (uint256);

  function vaultExists(uint256 _id) external view returns (bool);

  function vaultDebt(uint256 _vaultId) external view returns (uint256);

  function debt() external view returns (uint256);

  function collateralDebt(address _collateralType) external view returns (uint256);
}

// 
interface IFeeDistributor {
  event PayeeAdded(address indexed account, uint256 shares);
  event FeeReleased(uint256 income, uint256 releasedAt);

  function release() external;

  function changePayees(address[] memory _payees, uint256[] memory _shares) external;

  function a() external view returns (IAddressProvider);

  function lastReleasedAt() external view returns (uint256);

  function getPayees() external view returns (address[] memory);

  function totalShares() external view returns (uint256);

  function shares(address payee) external view returns (uint256);
}

// 
interface IAddressProvider {
  function setAccessController(IAccessController _controller) external;

  function setConfigProvider(IConfigProvider _config) external;

  function setVaultsCore(IVaultsCore _core) external;

  function setStableX(ISTABLEX _stablex) external;

  function setRatesManager(IRatesManager _ratesManager) external;

  function setPriceFeed(IPriceFeed _priceFeed) external;

  function setLiquidationManager(ILiquidationManager _liquidationManager) external;

  function setVaultsDataProvider(IVaultsDataProvider _vaultsData) external;

  function setFeeDistributor(IFeeDistributor _feeDistributor) external;

  function controller() external view returns (IAccessController);

  function config() external view returns (IConfigProvider);

  function core() external view returns (IVaultsCore);

  function stablex() external view returns (ISTABLEX);

  function ratesManager() external view returns (IRatesManager);

  function priceFeed() external view returns (IPriceFeed);

  function liquidationManager() external view returns (ILiquidationManager);

  function vaultsData() external view returns (IVaultsDataProvider);

  function feeDistributor() external view returns (IFeeDistributor);
}

// 
interface IConfigProviderV1 {
  struct CollateralConfig {
    address collateralType;
    uint256 debtLimit;
    uint256 minCollateralRatio;
    uint256 borrowRate;
    uint256 originationFee;
  }

  event CollateralUpdated(
    address indexed collateralType,
    uint256 debtLimit,
    uint256 minCollateralRatio,
    uint256 borrowRate,
    uint256 originationFee
  );
  event CollateralRemoved(address indexed collateralType);

  function setCollateralConfig(
    address _collateralType,
    uint256 _debtLimit,
    uint256 _minCollateralRatio,
    uint256 _borrowRate,
    uint256 _originationFee
  ) external;

  function removeCollateral(address _collateralType) external;

  function setCollateralDebtLimit(address _collateralType, uint256 _debtLimit) external;

  function setCollateralMinCollateralRatio(address _collateralType, uint256 _minCollateralRatio) external;

  function setCollateralBorrowRate(address _collateralType, uint256 _borrowRate) external;

  function setCollateralOriginationFee(address _collateralType, uint256 _originationFee) external;

  function setLiquidationBonus(uint256 _bonus) external;

  function a() external view returns (IAddressProviderV1);

  function collateralConfigs(uint256 _id) external view returns (CollateralConfig memory);

  function collateralIds(address _collateralType) external view returns (uint256);

  function numCollateralConfigs() external view returns (uint256);

  function liquidationBonus() external view returns (uint256);

  function collateralDebtLimit(address _collateralType) external view returns (uint256);

  function collateralMinCollateralRatio(address _collateralType) external view returns (uint256);

  function collateralBorrowRate(address _collateralType) external view returns (uint256);

  function collateralOriginationFee(address _collateralType) external view returns (uint256);
}

// 
interface ILiquidationManagerV1 {
  function a() external view returns (IAddressProviderV1);

  function calculateHealthFactor(
    address _collateralType,
    uint256 _collateralValue,
    uint256 _vaultDebt
  ) external view returns (uint256 healthFactor);

  function liquidationBonus(uint256 _amount) external view returns (uint256 bonus);

  function applyLiquidationDiscount(uint256 _amount) external view returns (uint256 discountedAmount);

  function isHealthy(
    address _collateralType,
    uint256 _collateralValue,
    uint256 _vaultDebt
  ) external view returns (bool);
}

// 
interface IVaultsCoreV1 {
  event Opened(uint256 indexed vaultId, address indexed collateralType, address indexed owner);
  event Deposited(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Withdrawn(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Borrowed(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Repaid(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Liquidated(
    uint256 indexed vaultId,
    uint256 debtRepaid,
    uint256 collateralLiquidated,
    address indexed owner,
    address indexed sender
  );

  event CumulativeRateUpdated(address indexed collateralType, uint256 elapsedTime, uint256 newCumulativeRate); //cumulative interest rate from deployment time T0

  event InsurancePaid(uint256 indexed vaultId, uint256 insuranceAmount, address indexed sender);

  function deposit(address _collateralType, uint256 _amount) external;

  function withdraw(uint256 _vaultId, uint256 _amount) external;

  function withdrawAll(uint256 _vaultId) external;

  function borrow(uint256 _vaultId, uint256 _amount) external;

  function repayAll(uint256 _vaultId) external;

  function repay(uint256 _vaultId, uint256 _amount) external;

  function liquidate(uint256 _vaultId) external;

  //Refresh
  function initializeRates(address _collateralType) external;

  function refresh() external;

  function refreshCollateral(address collateralType) external;

  //upgrade
  function upgrade(address _newVaultsCore) external;

  //Read only

  function a() external view returns (IAddressProviderV1);

  function availableIncome() external view returns (uint256);

  function cumulativeRates(address _collateralType) external view returns (uint256);

  function lastRefresh(address _collateralType) external view returns (uint256);
}

// 
interface IWETH {
  function deposit() external payable;

  function transfer(address to, uint256 value) external returns (bool);

  function withdraw(uint256 wad) external;
}

// 
interface IMIMO is IERC20 {

  function burn(address account, uint256 amount) external;
  
  function mint(address account, uint256 amount) external;

}

// 
interface ISupplyMiner {

  function baseDebtChanged(address user, uint256 newBaseDebt) external;
}

// 
interface IDebtNotifier {

  function debtChanged(uint256 _vaultId) external;

  function setCollateralSupplyMiner(address collateral, ISupplyMiner supplyMiner) external;

  function a() external view returns (IGovernanceAddressProvider);

	function collateralSupplyMinerMapping(address collateral) external view returns (ISupplyMiner);
}

// 
interface IGovernanceAddressProvider {
  function setParallelAddressProvider(IAddressProvider _parallel) external;

  function setMIMO(IMIMO _mimo) external;

  function setDebtNotifier(IDebtNotifier _debtNotifier) external;

  function setGovernorAlpha(IGovernorAlpha _governorAlpha) external;

  function setTimelock(ITimelock _timelock) external;

  function setVotingEscrow(IVotingEscrow _votingEscrow) external;

  function controller() external view returns (IAccessController);

  function parallel() external view returns (IAddressProvider);

  function mimo() external view returns (IMIMO);

  function debtNotifier() external view returns (IDebtNotifier);

  function governorAlpha() external view returns (IGovernorAlpha);

  function timelock() external view returns (ITimelock);

  function votingEscrow() external view returns (IVotingEscrow);
}

// 
interface IVaultsCore {
  event Opened(uint256 indexed vaultId, address indexed collateralType, address indexed owner);
  event Deposited(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Withdrawn(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Borrowed(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Repaid(uint256 indexed vaultId, uint256 amount, address indexed sender);
  event Liquidated(
    uint256 indexed vaultId,
    uint256 debtRepaid,
    uint256 collateralLiquidated,
    address indexed owner,
    address indexed sender
  );

  event InsurancePaid(uint256 indexed vaultId, uint256 insuranceAmount, address indexed sender);

  function deposit(address _collateralType, uint256 _amount) external;

  function depositETH() external payable;

  function depositByVaultId(uint256 _vaultId, uint256 _amount) external;

  function depositETHByVaultId(uint256 _vaultId) external payable;

  function depositAndBorrow(
    address _collateralType,
    uint256 _depositAmount,
    uint256 _borrowAmount
  ) external;

  function depositETHAndBorrow(uint256 _borrowAmount) external payable;

  function withdraw(uint256 _vaultId, uint256 _amount) external;

  function withdrawETH(uint256 _vaultId, uint256 _amount) external;

  function borrow(uint256 _vaultId, uint256 _amount) external;

  function repayAll(uint256 _vaultId) external;

  function repay(uint256 _vaultId, uint256 _amount) external;

  function liquidate(uint256 _vaultId) external;

  function liquidatePartial(uint256 _vaultId, uint256 _amount) external;

  function upgrade(address payable _newVaultsCore) external;

  function acceptUpgrade(address payable _oldVaultsCore) external;

  function setDebtNotifier(IDebtNotifier _debtNotifier) external;

  //Read only
  function a() external view returns (IAddressProvider);

  function WETH() external view returns (IWETH);

  function debtNotifier() external view returns (IDebtNotifier);

  function state() external view returns (IVaultsCoreState);

  function cumulativeRates(address _collateralType) external view returns (uint256);
}

// 
interface IAddressProviderV1 {
  function setAccessController(IAccessController _controller) external;

  function setConfigProvider(IConfigProviderV1 _config) external;

  function setVaultsCore(IVaultsCoreV1 _core) external;

  function setStableX(ISTABLEX _stablex) external;

  function setRatesManager(IRatesManager _ratesManager) external;

  function setPriceFeed(IPriceFeed _priceFeed) external;

  function setLiquidationManager(ILiquidationManagerV1 _liquidationManager) external;

  function setVaultsDataProvider(IVaultsDataProvider _vaultsData) external;

  function setFeeDistributor(IFeeDistributor _feeDistributor) external;

  function controller() external view returns (IAccessController);

  function config() external view returns (IConfigProviderV1);

  function core() external view returns (IVaultsCoreV1);

  function stablex() external view returns (ISTABLEX);

  function ratesManager() external view returns (IRatesManager);

  function priceFeed() external view returns (IPriceFeed);

  function liquidationManager() external view returns (ILiquidationManagerV1);

  function vaultsData() external view returns (IVaultsDataProvider);

  function feeDistributor() external view returns (IFeeDistributor);
}

// 
interface IVaultsCoreState {
  event CumulativeRateUpdated(address indexed collateralType, uint256 elapsedTime, uint256 newCumulativeRate); //cumulative interest rate from deployment time T0

  function initializeRates(address _collateralType) external;

  function refresh() external;

  function refreshCollateral(address collateralType) external;

  function syncState(IVaultsCoreState _stateAddress) external;

  function syncStateFromV1(IVaultsCoreV1 _core) external;

  //Read only
  function a() external view returns (IAddressProvider);

  function availableIncome() external view returns (uint256);

  function cumulativeRates(address _collateralType) external view returns (uint256);

  function lastRefresh(address _collateralType) external view returns (uint256);

  function synced() external view returns (bool);
}

// 
interface IConfigProvider {
  struct CollateralConfig {
    address collateralType;
    uint256 debtLimit;
    uint256 liquidationRatio;
    uint256 minCollateralRatio;
    uint256 borrowRate;
    uint256 originationFee;
    uint256 liquidationBonus;
    uint256 liquidationFee;
  }

  event CollateralUpdated(
    address indexed collateralType,
    uint256 debtLimit,
    uint256 liquidationRatio,
    uint256 minCollateralRatio,
    uint256 borrowRate,
    uint256 originationFee,
    uint256 liquidationBonus,
    uint256 liquidationFee
  );
  event CollateralRemoved(address indexed collateralType);

  function setCollateralConfig(
    address _collateralType,
    uint256 _debtLimit,
    uint256 _liquidationRatio,
    uint256 _minCollateralRatio,
    uint256 _borrowRate,
    uint256 _originationFee,
    uint256 _liquidationBonus,
    uint256 _liquidationFee
  ) external;

  function removeCollateral(address _collateralType) external;

  function setCollateralDebtLimit(address _collateralType, uint256 _debtLimit) external;

  function setCollateralLiquidationRatio(address _collateralType, uint256 _liquidationRatio) external;

  function setCollateralMinCollateralRatio(address _collateralType, uint256 _minCollateralRatio) external;

  function setCollateralBorrowRate(address _collateralType, uint256 _borrowRate) external;

  function setCollateralOriginationFee(address _collateralType, uint256 _originationFee) external;

  function setCollateralLiquidationBonus(address _collateralType, uint256 _liquidationBonus) external;

  function setCollateralLiquidationFee(address _collateralType, uint256 _liquidationFee) external;

  function setMinVotingPeriod(uint256 _minVotingPeriod) external;

  function setMaxVotingPeriod(uint256 _maxVotingPeriod) external;

  function setVotingQuorum(uint256 _votingQuorum) external;

  function setProposalThreshold(uint256 _proposalThreshold) external;

  function a() external view returns (IAddressProvider);

  function collateralConfigs(uint256 _id) external view returns (CollateralConfig memory);

  function collateralIds(address _collateralType) external view returns (uint256);

  function numCollateralConfigs() external view returns (uint256);

  function minVotingPeriod() external view returns (uint256);

  function maxVotingPeriod() external view returns (uint256);

  function votingQuorum() external view returns (uint256);

  function proposalThreshold() external view returns (uint256);

  function collateralDebtLimit(address _collateralType) external view returns (uint256);

  function collateralLiquidationRatio(address _collateralType) external view returns (uint256);

  function collateralMinCollateralRatio(address _collateralType) external view returns (uint256);

  function collateralBorrowRate(address _collateralType) external view returns (uint256);

  function collateralOriginationFee(address _collateralType) external view returns (uint256);

  function collateralLiquidationBonus(address _collateralType) external view returns (uint256);

  function collateralLiquidationFee(address _collateralType) external view returns (uint256);
}

// solium-disable security/no-block-members
// 
/**
 * @title  MIMO
 * @notice  MIMO Governance token
 */
contract MIMO is ERC20("MIMO Parallel Governance Token", "MIMO") {
  IGovernanceAddressProvider public a;

  bytes32 public constant MIMO_MINTER_ROLE = keccak256("MIMO_MINTER_ROLE");

  constructor(IGovernanceAddressProvider _a) public {
    require(address(_a) != address(0));

    a = _a;
  }

  modifier onlyMIMOMinter() {
    require(a.controller().hasRole(MIMO_MINTER_ROLE, msg.sender), "Caller is not MIMO Minter");
    _;
  }

  function mint(address account, uint256 amount) public onlyMIMOMinter {
    _mint(account, amount);
  }

  function burn(address account, uint256 amount) public onlyMIMOMinter {
    _burn(account, amount);
  }
}

Contract Security Audit

No Contract Security Audit Submitted- Submit Audit Here

Contract ABI

[{"inputs":[{"internalType":"contract IGovernanceAddressProvider","name":"_a","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"MIMO_MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"a","outputs":[{"internalType":"contract IGovernanceAddressProvider","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

Contract Creation Code

Decompile Bytecode Switch to Opcodes View

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

Deployed Bytecode

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

000000000000000000000000718b7584d410f364fc16724027c07c617b87f2fc

-----Decoded View---------------
Arg [0] : _a (address): 0x718B7584D410F364fC16724027C07C617B87f2Fc

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000718b7584d410f364fc16724027c07c617b87f2fc

Volume (24H)	:	$507.65
Market Capitalization	:	$0.00
Circulating Supply	:	0.00 MIMO
Market Data Source: Coinmarketcap

Token

Overview

Max Total Supply

Holders

Market

Price

Onchain Market Cap

Circulating Supply Market Cap

Other Info

Token Contract (WITH 18 Decimals)

Filtered by Token Holder

Balance

Value

Contract Source Code Verified (Exact Match)

Contract Source Code (Solidity)

Contract Security Audit

Contract ABI

Contract Creation Code

Deployed Bytecode

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

Tools & Services

Token

Overview

Max Total Supply

Holders

Market

Price

Onchain Market Cap

Circulating Supply Market Cap

Other Info

Token Contract (WITH 18 Decimals)

Filtered by Token Holder

Balance

Value

Contract Source Code Verified (Exact Match)

Contract Source Code (Solidity)

Contract Security Audit

Contract ABI

Contract Creation Code

Deployed Bytecode

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)