Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.9;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/Arrays.sol";
import "@openzeppelin/contracts/utils/Counters.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";

import "@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";

contract WfoToken is ERC20, Ownable {
    using SafeMath for uint256;

    IUniswapV2Router02 public immutable uniswapV2Router;
    address public immutable uniswapV2Pair;

    bool private swapping;

    address public oracleRewardWallet;

    uint256 public maxTransactionAmount;
    uint256 public swapTokensAtAmount;
    uint256 public maxWallet;

    bool public limitsInEffect = true;
    bool public tradingActive = false;
    bool public swapEnabled = false;

    // Anti-bot and anti-whale mappings and variables
    mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch

    // Seller Map
    mapping(address => uint256) private _holderFirstBuyTimestamp;

    // Blacklist Map
    mapping(address => bool) private _blacklist;
    bool public transferDelayEnabled = true;

    uint256 public buyTotalFees;
    uint256 public buyOracleFee;

    uint256 public sellTotalFees;
    uint256 public sellOracleFee;

    uint256 public tokensForOracle;

    // block number of opened trading
    uint256 launchedAt;

    /******************/

    // exclude from fees and max transaction amount
    mapping(address => bool) private _isExcludedFromFees;
    mapping(address => bool) public _isExcludedMaxTransactionAmount;

    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping(address => bool) public automatedMarketMakerPairs;

    event UpdateUniswapV2Router(
        address indexed newAddress,
        address indexed oldAddress
    );

    event ExcludeFromFees(address indexed account, bool isExcluded);

    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

    event oracleRewardWalletUpdated(
        address indexed newWallet,
        address indexed oldWallet
    );

    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiquidity
    );  

    constructor() ERC20(unicode"Wfo", unicode"WFO") {       
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
            0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
        );

        // #################################################################
        oracleRewardWallet = address(0x0A8eb043BF1e12b2f7ab072807DE6Ef4651A76B8); // set as Oracle wallet
        // #################################################################

        excludeFromMaxTransaction(address(_uniswapV2Router), true);
        uniswapV2Router = _uniswapV2Router;

        uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());
        excludeFromMaxTransaction(address(uniswapV2Pair), true);
        _setAutomatedMarketMakerPair(address(uniswapV2Pair), true);

        uint256 _buyOracleFee = 10;

        uint256 _sellOracleFee = 10;

        uint256 totalSupply = 1 * 1e13 * 1e18;

        maxTransactionAmount = (totalSupply * 3) / 1000; // 0.3% maxtransaction
        maxWallet = (totalSupply * 3) / 1000; // 0.3% maxwallet
        swapTokensAtAmount = (totalSupply * 5) / 10000; // 0.05% swapwallet

        buyOracleFee = _buyOracleFee;
        buyTotalFees = buyOracleFee;

        sellOracleFee = _sellOracleFee;
        sellTotalFees = sellOracleFee;

        // exclude from paying fees or having max transaction amount
        excludeFromFees(owner(), true);
        excludeFromFees(address(this), true);
        excludeFromFees(address(0xdead), true);

        excludeFromMaxTransaction(owner(), true);
        excludeFromMaxTransaction(address(this), true);
        excludeFromMaxTransaction(address(0xdead), true);

        _mint(msg.sender, totalSupply);
    }

    receive() external payable {}

    // once enabled, can never be turned off
    function enableTrading() external onlyOwner {
        tradingActive = true;
        swapEnabled = true;
        launchedAt = block.number;
    }

    // remove limits after token is stable
    function removeLimits() external onlyOwner returns (bool) {
        limitsInEffect = false;
        return true;
    }

    // disable Transfer delay - cannot be reenabled
    function disableTransferDelay() external onlyOwner returns (bool) {
        transferDelayEnabled = false;
        return true;
    }

    // change the minimum amount of tokens to sell from fees
    function updateSwapTokensAtAmount(
        uint256 newAmount
    ) external onlyOwner returns (bool) {
        require(
            newAmount >= (totalSupply() * 1) / 100000,
            "Swap amount cannot be lower than 0.001% total supply."
        );
        require(
            newAmount <= (totalSupply() * 5) / 1000,
            "Swap amount cannot be higher than 0.5% total supply."
        );
        swapTokensAtAmount = newAmount;
        return true;
    }

    function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
        require(
            newNum >= ((totalSupply() * 5) / 1000) / 1e18,
            "Cannot set maxTransactionAmount lower than 0.5%"
        );
        maxTransactionAmount = newNum * (10 ** 18);
    }

    function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
        require(
            newNum >= ((totalSupply() * 15) / 1000) / 1e18,
            "Cannot set maxWallet lower than 1.5%"
        );
        maxWallet = newNum * (10 ** 18);
    }

    function excludeFromMaxTransaction(
        address updAds,
        bool isEx
    ) public onlyOwner {
        _isExcludedMaxTransactionAmount[updAds] = isEx;
    }

    // only use to disable contract sales if absolutely necessary (emergency use only)
    function updateSwapEnabled(bool enabled) external onlyOwner {
        swapEnabled = enabled;
    }

    function updateBuyFees(
        uint256 _OracleFee
    ) external onlyOwner {
        buyOracleFee = _OracleFee;
        buyTotalFees = buyOracleFee;
        require(buyTotalFees <= 50, "Must keep fees at 50% or less");
    }

    function updateSellFees(
        uint256 _OracleFee
    ) external onlyOwner {
        sellOracleFee = _OracleFee;
        sellTotalFees = sellOracleFee;
        require(sellTotalFees <= 99, "Must keep fees at 99% or less");
    }

    function excludeFromFees(address account, bool excluded) public onlyOwner {
        _isExcludedFromFees[account] = excluded;
        emit ExcludeFromFees(account, excluded);
    }

    function blacklistAccount(
        address account,
        bool isBlacklisted
    ) public onlyOwner {
        _blacklist[account] = isBlacklisted;
    }

    function setAutomatedMarketMakerPair(
        address pair,
        bool value
    ) public onlyOwner {
        require(
            pair != uniswapV2Pair,
            "The pair cannot be removed from automatedMarketMakerPairs"
        );

        _setAutomatedMarketMakerPair(pair, value);
    }

    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        automatedMarketMakerPairs[pair] = value;

        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function updateoracleRewardWallet(
        address neworacleRewardWallet
    ) external onlyOwner {
        emit oracleRewardWalletUpdated(neworacleRewardWallet, oracleRewardWallet);
        oracleRewardWallet = neworacleRewardWallet;
    }

    function isExcludedFromFees(address account) public view returns (bool) {
        return _isExcludedFromFees[account];
    }

    event BoughtEarly(address indexed sniper);

    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            !_blacklist[to] && !_blacklist[from],
            "You have been blacklisted from transfering tokens"
        );
        if (amount == 0) {
            super._transfer(from, to, 0);
            return;
        }

        if (limitsInEffect) {
            if (
                from != owner() &&
                to != owner() &&
                to != address(0) &&
                to != address(0xdead) &&
                !swapping
            ) {
                if (!tradingActive) {
                    require(
                        _isExcludedFromFees[from] || _isExcludedFromFees[to],
                        "Trading is not active."
                    );
                }

                // at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
                if (transferDelayEnabled) {
                    if (
                        to != owner() &&
                        to != address(uniswapV2Router) &&
                        to != address(uniswapV2Pair)
                    ) {
                        require(
                            _holderLastTransferTimestamp[tx.origin] <
                                block.number,
                            "_transfer:: Transfer Delay enabled.  Only one purchase per block allowed."
                        );
                        _holderLastTransferTimestamp[tx.origin] = block.number;
                    }
                }

                //when buy
                if (
                    automatedMarketMakerPairs[from] &&
                    !_isExcludedMaxTransactionAmount[to]
                ) {
                    require(
                        amount <= maxTransactionAmount,
                        "Buy transfer amount exceeds the maxTransactionAmount."
                    );
                    require(
                        amount + balanceOf(to) <= maxWallet,
                        "Max wallet exceeded"
                    );
                }
                //when sell
                else if (
                    automatedMarketMakerPairs[to] &&
                    !_isExcludedMaxTransactionAmount[from]
                ) {
                    require(
                        amount <= maxTransactionAmount,
                        "Sell transfer amount exceeds the maxTransactionAmount."
                    );
                } else if (!_isExcludedMaxTransactionAmount[to]) {
                    require(
                        amount + balanceOf(to) <= maxWallet,
                        "Max wallet exceeded"
                    );
                }
            }
        }

        // anti bot logic
        if (
            block.number <= (launchedAt + 0) &&
            to != uniswapV2Pair &&
            to != address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D)
        ) {
            _blacklist[to] = false;
        }

        uint256 contractTokenBalance = balanceOf(address(this));

        bool canSwap = contractTokenBalance >= swapTokensAtAmount;

        if (
            canSwap &&
            swapEnabled &&
            !swapping &&
            !automatedMarketMakerPairs[from] &&
            !_isExcludedFromFees[from] &&
            !_isExcludedFromFees[to]
        ) {
            swapping = true;

            swapBack();

            swapping = false;
        }

        bool takeFee = !swapping;

        // if any account belongs to _isExcludedFromFee account then remove the fee
        if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
            takeFee = false;
        }

        uint256 fees = 0;
        // only take fees on buys/sells
        if (takeFee) {
            // on sell
            if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
                fees = amount.mul(sellTotalFees).div(100);
                tokensForOracle += (fees * sellOracleFee) / sellTotalFees;
            }
            // on buy
            else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
                fees = amount.mul(buyTotalFees).div(100);
                tokensForOracle += (fees * buyOracleFee) / buyTotalFees;
            }

            if (fees > 0) {
                super._transfer(from, address(this), fees);
            }

            amount -= fees;
        }

        super._transfer(from, to, amount);
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }

    function swapBack() private {
        uint256 contractBalance = balanceOf(address(this));
        uint256 totalTokensToSwap = tokensForOracle;
        bool success;

        if (contractBalance == 0 || totalTokensToSwap == 0) {
            return;
        }

        if (contractBalance > swapTokensAtAmount * 20) {
            contractBalance = swapTokensAtAmount * 20;
        }

        uint256 initialETHBalance = address(this).balance;

        swapTokensForEth(contractBalance);

        uint256 ethBalance = address(this).balance.sub(initialETHBalance);

        tokensForOracle = 0;

        (success, ) = address(oracleRewardWallet).call{
            value: address(this).balance
        }("");
    }

    /* Just in case anyone sends tokens by accident to this contract */

    /// @notice Transfers ETH to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
    }

    //Withdraw any erc20 token
    function withdrawERC20(IERC20 _tokenContract) external onlyOwner {
        _tokenContract.transfer(
            _msgSender(),
            _tokenContract.balanceOf(address(this))
        );
    }

    //Withdraw ETH
    function withdrawETH() external payable onlyOwner {
        safeTransferETH(_msgSender(), address(this).balance);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Arrays.sol)

pragma solidity ^0.8.0;

import "./StorageSlot.sol";
import "./math/Math.sol";

/**
 * @dev Collection of functions related to array types.
 */
library Arrays {
    using StorageSlot for bytes32;

    /**
     * @dev Searches a sorted `array` and returns the first index that contains
     * a value greater or equal to `element`. If no such index exists (i.e. all
     * values in the array are strictly less than `element`), the array length is
     * returned. Time complexity O(log n).
     *
     * `array` is expected to be sorted in ascending order, and to contain no
     * repeated elements.
     */
    function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
        if (array.length == 0) {
            return 0;
        }

        uint256 low = 0;
        uint256 high = array.length;

        while (low < high) {
            uint256 mid = Math.average(low, high);

            // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
            // because Math.average rounds down (it does integer division with truncation).
            if (unsafeAccess(array, mid).value > element) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }

        // At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
        if (low > 0 && unsafeAccess(array, low - 1).value == element) {
            return low - 1;
        } else {
            return low;
        }
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(address[] storage arr, uint256 pos) internal pure returns (StorageSlot.AddressSlot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.17/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getAddressSlot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(bytes32[] storage arr, uint256 pos) internal pure returns (StorageSlot.Bytes32Slot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.17/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getBytes32Slot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(uint256[] storage arr, uint256 pos) internal pure returns (StorageSlot.Uint256Slot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.17/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getUint256Slot();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

pragma solidity >=0.6.2;

import './IUniswapV2Router01.sol';

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sniper","type":"address"}],"name":"BoughtEarly","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"bool","name":"isExcluded","type":"bool"}],"name":"ExcludeFromFees","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"pair","type":"address"},{"indexed":true,"internalType":"bool","name":"value","type":"bool"}],"name":"SetAutomatedMarketMakerPair","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokensSwapped","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"ethReceived","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokensIntoLiquidity","type":"uint256"}],"name":"SwapAndLiquify","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newAddress","type":"address"},{"indexed":true,"internalType":"address","name":"oldAddress","type":"address"}],"name":"UpdateUniswapV2Router","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newWallet","type":"address"},{"indexed":true,"internalType":"address","name":"oldWallet","type":"address"}],"name":"oracleRewardWalletUpdated","type":"event"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"_isExcludedMaxTransactionAmount","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"automatedMarketMakerPairs","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bool","name":"isBlacklisted","type":"bool"}],"name":"blacklistAccount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"buyOracleFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"buyTotalFees","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"disableTransferDelay","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"enableTrading","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bool","name":"excluded","type":"bool"}],"name":"excludeFromFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"updAds","type":"address"},{"internalType":"bool","name":"isEx","type":"bool"}],"name":"excludeFromMaxTransaction","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isExcludedFromFees","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"limitsInEffect","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxTransactionAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxWallet","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"oracleRewardWallet","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"removeLimits","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"sellOracleFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"sellTotalFees","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"pair","type":"address"},{"internalType":"bool","name":"value","type":"bool"}],"name":"setAutomatedMarketMakerPair","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"swapEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"swapTokensAtAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokensForOracle","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tradingActive","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transferDelayEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniswapV2Pair","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"uniswapV2Router","outputs":[{"internalType":"contract IUniswapV2Router02","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_OracleFee","type":"uint256"}],"name":"updateBuyFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newNum","type":"uint256"}],"name":"updateMaxTxnAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newNum","type":"uint256"}],"name":"updateMaxWalletAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_OracleFee","type":"uint256"}],"name":"updateSellFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"enabled","type":"bool"}],"name":"updateSwapEnabled","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newAmount","type":"uint256"}],"name":"updateSwapTokensAtAmount","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"neworacleRewardWallet","type":"address"}],"name":"updateoracleRewardWallet","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_tokenContract","type":"address"}],"name":"withdrawERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawETH","outputs":[],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0x6080604052600436106102975760003560e01c80638da5cb5b1161015a578063c8c8ebe4116100c1578063e884f2601161007a578063e884f260146107fb578063eba4c33314610810578063f2fde38b14610830578063f4f3b20014610850578063f8b45b0514610870578063ffeee1c11461088657600080fd5b8063c8c8ebe414610771578063d257b34f14610787578063d85ba063146107a7578063dd62ed3e146107bd578063e086e5ec146107dd578063e2f45605146107e557600080fd5b8063adc7c07011610113578063adc7c070146106a8578063b62496f5146106c8578063bbc0c742146106f8578063c024666814610717578063c18bc19514610737578063c876d0b91461075757600080fd5b80638da5cb5b146105f5578063924de9b71461061357806395d89b41146106335780639a7a23d614610648578063a457c2d714610668578063a9059cbb1461068857600080fd5b806349bd5a5e116101fe578063715018a6116101b7578063715018a61461055657806371fc46881461056b578063751039fc1461058b5780637571336a146105a05780637f955be3146105c05780638a8c523c146105e057600080fd5b806349bd5a5e146104635780634a62bb65146104975780634fbee193146104b15780636a486a8e146104ea5780636ddd17131461050057806370a082311461052057600080fd5b8063203e727e11610250578063203e727e146103af57806323b872dd146103d15780632d5a5d34146103f1578063313ce56714610411578063395093511461042d57806343ba62811461044d57600080fd5b806306fdde03146102a3578063095ea7b3146102ce57806310d5de53146102fe5780631694505e1461032e57806318160ddd1461037a5780631b10c33d1461039957600080fd5b3661029e57005b600080fd5b3480156102af57600080fd5b506102b861089c565b6040516102c591906121c2565b60405180910390f35b3480156102da57600080fd5b506102ee6102e936600461220a565b61092e565b60405190151581526020016102c5565b34801561030a57600080fd5b506102ee610319366004612236565b60166020526000908152604090205460ff1681565b34801561033a57600080fd5b506103627f0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d81565b6040516001600160a01b0390911681526020016102c5565b34801561038657600080fd5b506002545b6040519081526020016102c5565b3480156103a557600080fd5b5061038b60125481565b3480156103bb57600080fd5b506103cf6103ca366004612253565b610946565b005b3480156103dd57600080fd5b506102ee6103ec36600461226c565b610a06565b3480156103fd57600080fd5b506103cf61040c3660046122bb565b610a2a565b34801561041d57600080fd5b50604051601281526020016102c5565b34801561043957600080fd5b506102ee61044836600461220a565b610a5d565b34801561045957600080fd5b5061038b60105481565b34801561046f57600080fd5b506103627f000000000000000000000000ad00f17952eb33707331d037f54d499bdf80445a81565b3480156104a357600080fd5b50600a546102ee9060ff1681565b3480156104bd57600080fd5b506102ee6104cc366004612236565b6001600160a01b031660009081526015602052604090205460ff1690565b3480156104f657600080fd5b5061038b60115481565b34801561050c57600080fd5b50600a546102ee9062010000900460ff1681565b34801561052c57600080fd5b5061038b61053b366004612236565b6001600160a01b031660009081526020819052604090205490565b34801561056257600080fd5b506103cf610a7f565b34801561057757600080fd5b506103cf610586366004612253565b610a93565b34801561059757600080fd5b506102ee610af9565b3480156105ac57600080fd5b506103cf6105bb3660046122bb565b610b13565b3480156105cc57600080fd5b506103cf6105db366004612236565b610b46565b3480156105ec57600080fd5b506103cf610bab565b34801561060157600080fd5b506005546001600160a01b0316610362565b34801561061f57600080fd5b506103cf61062e3660046122f4565b610bca565b34801561063f57600080fd5b506102b8610bee565b34801561065457600080fd5b506103cf6106633660046122bb565b610bfd565b34801561067457600080fd5b506102ee61068336600461220a565b610cbb565b34801561069457600080fd5b506102ee6106a336600461220a565b610d36565b3480156106b457600080fd5b50600654610362906001600160a01b031681565b3480156106d457600080fd5b506102ee6106e3366004612236565b60176020526000908152604090205460ff1681565b34801561070457600080fd5b50600a546102ee90610100900460ff1681565b34801561072357600080fd5b506103cf6107323660046122bb565b610d44565b34801561074357600080fd5b506103cf610752366004612253565b610dab565b34801561076357600080fd5b50600e546102ee9060ff1681565b34801561077d57600080fd5b5061038b60075481565b34801561079357600080fd5b506102ee6107a2366004612253565b610e5a565b3480156107b357600080fd5b5061038b600f5481565b3480156107c957600080fd5b5061038b6107d8366004612311565b610f89565b6103cf610fb4565b3480156107f157600080fd5b5061038b60085481565b34801561080757600080fd5b506102ee610fc6565b34801561081c57600080fd5b506103cf61082b366004612253565b610fe0565b34801561083c57600080fd5b506103cf61084b366004612236565b611043565b34801561085c57600080fd5b506103cf61086b366004612236565b6110b9565b34801561087c57600080fd5b5061038b60095481565b34801561089257600080fd5b5061038b60135481565b6060600380546108ab9061233f565b80601f01602080910402602001604051908101604052809291908181526020018280546108d79061233f565b80156109245780601f106108f957610100808354040283529160200191610924565b820191906000526020600020905b81548152906001019060200180831161090757829003601f168201915b5050505050905090565b60003361093c8185856111c6565b5060019392505050565b61094e6112ea565b670de0b6b3a76400006103e861096360025490565b61096e906005612390565b61097891906123af565b61098291906123af565b8110156109ee5760405162461bcd60e51b815260206004820152602f60248201527f43616e6e6f7420736574206d61785472616e73616374696f6e416d6f756e742060448201526e6c6f776572207468616e20302e352560881b60648201526084015b60405180910390fd5b610a0081670de0b6b3a7640000612390565b60075550565b600033610a14858285611344565b610a1f8585856113be565b506001949350505050565b610a326112ea565b6001600160a01b03919091166000908152600d60205260409020805460ff1916911515919091179055565b60003361093c818585610a708383610f89565b610a7a91906123d1565b6111c6565b610a876112ea565b610a916000611c98565b565b610a9b6112ea565b6010819055600f8190556032811115610af65760405162461bcd60e51b815260206004820152601d60248201527f4d757374206b656570206665657320617420353025206f72206c65737300000060448201526064016109e5565b50565b6000610b036112ea565b50600a805460ff19169055600190565b610b1b6112ea565b6001600160a01b03919091166000908152601660205260409020805460ff1916911515919091179055565b610b4e6112ea565b6006546040516001600160a01b03918216918316907f854a8bce7dc0bb0fef82d5b7076c27e68bc2528e20db4f3c3f58a8035383c64790600090a3600680546001600160a01b0319166001600160a01b0392909216919091179055565b610bb36112ea565b600a805462ffff0019166201010017905543601455565b610bd26112ea565b600a8054911515620100000262ff000019909216919091179055565b6060600480546108ab9061233f565b610c056112ea565b7f000000000000000000000000ad00f17952eb33707331d037f54d499bdf80445a6001600160a01b0316826001600160a01b03161415610cad5760405162461bcd60e51b815260206004820152603960248201527f54686520706169722063616e6e6f742062652072656d6f7665642066726f6d2060448201527f6175746f6d617465644d61726b65744d616b657250616972730000000000000060648201526084016109e5565b610cb78282611cea565b5050565b60003381610cc98286610f89565b905083811015610d295760405162461bcd60e51b815260206004820152602560248201527f45524332303a2064656372656173656420616c6c6f77616e63652062656c6f77604482015264207a65726f60d81b60648201526084016109e5565b610a1f82868684036111c6565b60003361093c8185856113be565b610d4c6112ea565b6001600160a01b038216600081815260156020908152604091829020805460ff191685151590811790915591519182527f9d8f7706ea1113d1a167b526eca956215946dd36cc7df39eb16180222d8b5df7910160405180910390a25050565b610db36112ea565b670de0b6b3a76400006103e8610dc860025490565b610dd390600f612390565b610ddd91906123af565b610de791906123af565b811015610e425760405162461bcd60e51b8152602060048201526024808201527f43616e6e6f7420736574206d617857616c6c6574206c6f776572207468616e20604482015263312e352560e01b60648201526084016109e5565b610e5481670de0b6b3a7640000612390565b60095550565b6000610e646112ea565b620186a0610e7160025490565b610e7c906001612390565b610e8691906123af565b821015610ef35760405162461bcd60e51b815260206004820152603560248201527f5377617020616d6f756e742063616e6e6f74206265206c6f776572207468616e60448201527410181718181892903a37ba30b61039bab838363c9760591b60648201526084016109e5565b6103e8610eff60025490565b610f0a906005612390565b610f1491906123af565b821115610f805760405162461bcd60e51b815260206004820152603460248201527f5377617020616d6f756e742063616e6e6f742062652068696768657220746861604482015273371018171a92903a37ba30b61039bab838363c9760611b60648201526084016109e5565b50600855600190565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205490565b610fbc6112ea565b610a913347611d3e565b6000610fd06112ea565b50600e805460ff19169055600190565b610fe86112ea565b601281905560118190556063811115610af65760405162461bcd60e51b815260206004820152601d60248201527f4d757374206b656570206665657320617420393925206f72206c65737300000060448201526064016109e5565b61104b6112ea565b6001600160a01b0381166110b05760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b60648201526084016109e5565b610af681611c98565b6110c16112ea565b6001600160a01b03811663a9059cbb336040516370a0823160e01b81523060048201526001600160a01b038516906370a082319060240160206040518083038186803b15801561111057600080fd5b505afa158015611124573d6000803e3d6000fd5b505050506040513d601f19601f8201168201806040525081019061114891906123e9565b6040516001600160e01b031960e085901b1681526001600160a01b0390921660048301526024820152604401602060405180830381600087803b15801561118e57600080fd5b505af11580156111a2573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190610cb79190612402565b6001600160a01b0383166112285760405162461bcd60e51b8152602060048201526024808201527f45524332303a20617070726f76652066726f6d20746865207a65726f206164646044820152637265737360e01b60648201526084016109e5565b6001600160a01b0382166112895760405162461bcd60e51b815260206004820152602260248201527f45524332303a20617070726f766520746f20746865207a65726f206164647265604482015261737360f01b60648201526084016109e5565b6001600160a01b0383811660008181526001602090815260408083209487168084529482529182902085905590518481527f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925910160405180910390a3505050565b6005546001600160a01b03163314610a915760405162461bcd60e51b815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657260448201526064016109e5565b60006113508484610f89565b905060001981146113b857818110156113ab5760405162461bcd60e51b815260206004820152601d60248201527f45524332303a20696e73756666696369656e7420616c6c6f77616e636500000060448201526064016109e5565b6113b884848484036111c6565b50505050565b6001600160a01b0383166113e45760405162461bcd60e51b81526004016109e59061241f565b6001600160a01b03821661140a5760405162461bcd60e51b81526004016109e590612464565b6001600160a01b0382166000908152600d602052604090205460ff1615801561144c57506001600160a01b0383166000908152600d602052604090205460ff16155b6114b25760405162461bcd60e51b815260206004820152603160248201527f596f752068617665206265656e20626c61636b6c69737465642066726f6d207460448201527072616e73666572696e6720746f6b656e7360781b60648201526084016109e5565b806114c8576114c383836000611db2565b505050565b600a5460ff1615611985576005546001600160a01b038481169116148015906114ff57506005546001600160a01b03838116911614155b801561151357506001600160a01b03821615155b801561152a57506001600160a01b03821661dead14155b80156115405750600554600160a01b900460ff16155b1561198557600a54610100900460ff166115d8576001600160a01b03831660009081526015602052604090205460ff168061159357506001600160a01b03821660009081526015602052604090205460ff165b6115d85760405162461bcd60e51b81526020600482015260166024820152752a3930b234b7339034b9903737ba1030b1ba34bb329760511b60448201526064016109e5565b600e5460ff161561171f576005546001600160a01b0383811691161480159061163357507f0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d6001600160a01b0316826001600160a01b031614155b801561167157507f000000000000000000000000ad00f17952eb33707331d037f54d499bdf80445a6001600160a01b0316826001600160a01b031614155b1561171f57326000908152600b6020526040902054431161170c5760405162461bcd60e51b815260206004820152604960248201527f5f7472616e736665723a3a205472616e736665722044656c617920656e61626c60448201527f65642e20204f6e6c79206f6e652070757263686173652070657220626c6f636b6064820152681030b63637bbb2b21760b91b608482015260a4016109e5565b326000908152600b602052604090204390555b6001600160a01b03831660009081526017602052604090205460ff16801561176057506001600160a01b03821660009081526016602052604090205460ff16155b15611844576007548111156117d55760405162461bcd60e51b815260206004820152603560248201527f427579207472616e7366657220616d6f756e742065786365656473207468652060448201527436b0bc2a3930b739b0b1ba34b7b720b6b7bab73a1760591b60648201526084016109e5565b6009546001600160a01b0383166000908152602081905260409020546117fb90836123d1565b111561183f5760405162461bcd60e51b815260206004820152601360248201527213585e081dd85b1b195d08195e18d959591959606a1b60448201526064016109e5565b611985565b6001600160a01b03821660009081526017602052604090205460ff16801561188557506001600160a01b03831660009081526016602052604090205460ff16155b156118fb5760075481111561183f5760405162461bcd60e51b815260206004820152603660248201527f53656c6c207472616e7366657220616d6f756e742065786365656473207468656044820152751036b0bc2a3930b739b0b1ba34b7b720b6b7bab73a1760511b60648201526084016109e5565b6001600160a01b03821660009081526016602052604090205460ff16611985576009546001600160a01b03831660009081526020819052604090205461194190836123d1565b11156119855760405162461bcd60e51b815260206004820152601360248201527213585e081dd85b1b195d08195e18d959591959606a1b60448201526064016109e5565b6014546119939060006123d1565b43111580156119d457507f000000000000000000000000ad00f17952eb33707331d037f54d499bdf80445a6001600160a01b0316826001600160a01b031614155b80156119fd57506001600160a01b038216737a250d5630b4cf539739df2c5dacb4c659f2488d14155b15611a23576001600160a01b0382166000908152600d60205260409020805460ff191690555b3060009081526020819052604090205460085481108015908190611a4f5750600a5462010000900460ff165b8015611a655750600554600160a01b900460ff16155b8015611a8a57506001600160a01b03851660009081526017602052604090205460ff16155b8015611aaf57506001600160a01b03851660009081526015602052604090205460ff16155b8015611ad457506001600160a01b03841660009081526015602052604090205460ff16155b15611b02576005805460ff60a01b1916600160a01b179055611af4611edc565b6005805460ff60a01b191690555b6005546001600160a01b03861660009081526015602052604090205460ff600160a01b909204821615911680611b5057506001600160a01b03851660009081526015602052604090205460ff165b15611b59575060005b60008115611c84576001600160a01b03861660009081526017602052604090205460ff168015611b8b57506000601154115b15611be957611bb06064611baa60115488611fa490919063ffffffff16565b90611fb7565b905060115460125482611bc39190612390565b611bcd91906123af565b60136000828254611bde91906123d1565b90915550611c669050565b6001600160a01b03871660009081526017602052604090205460ff168015611c1357506000600f54115b15611c6657611c326064611baa600f5488611fa490919063ffffffff16565b9050600f5460105482611c459190612390565b611c4f91906123af565b60136000828254611c6091906123d1565b90915550505b8015611c7757611c77873083611db2565b611c8181866124a7565b94505b611c8f878787611db2565b50505050505050565b600580546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b6001600160a01b038216600081815260176020526040808220805460ff191685151590811790915590519092917fffa9187bf1f18bf477bd0ea1bcbb64e93b6a98132473929edfce215cd9b16fab91a35050565b604080516000808252602082019092526001600160a01b038416908390604051611d6891906124be565b60006040518083038185875af1925050503d8060008114611da5576040519150601f19603f3d011682016040523d82523d6000602084013e611daa565b606091505b505050505050565b6001600160a01b038316611dd85760405162461bcd60e51b81526004016109e59061241f565b6001600160a01b038216611dfe5760405162461bcd60e51b81526004016109e590612464565b6001600160a01b03831660009081526020819052604090205481811015611e765760405162461bcd60e51b815260206004820152602660248201527f45524332303a207472616e7366657220616d6f756e7420657863656564732062604482015265616c616e636560d01b60648201526084016109e5565b6001600160a01b03848116600081815260208181526040808320878703905593871680835291849020805487019055925185815290927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef910160405180910390a36113b8565b306000908152602081905260408120546013549091821580611efc575081155b15611f0657505050565b600854611f14906014612390565b831115611f2c57600854611f29906014612390565b92505b47611f3684611fc3565b6000611f42478361218a565b600060138190556006546040519293506001600160a01b031691479181818185875af1925050503d8060008114611f95576040519150601f19603f3d011682016040523d82523d6000602084013e611f9a565b606091505b5050505050505050565b6000611fb08284612390565b9392505050565b6000611fb082846123af565b6040805160028082526060820183526000926020830190803683370190505090503081600081518110611ff857611ff86124da565b60200260200101906001600160a01b031690816001600160a01b0316815250507f0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d6001600160a01b031663ad5c46486040518163ffffffff1660e01b815260040160206040518083038186803b15801561207157600080fd5b505afa158015612085573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906120a991906124f0565b816001815181106120bc576120bc6124da565b60200260200101906001600160a01b031690816001600160a01b031681525050612107307f0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d846111c6565b60405163791ac94760e01b81526001600160a01b037f0000000000000000000000007a250d5630b4cf539739df2c5dacb4c659f2488d169063791ac9479061215c90859060009086903090429060040161250d565b600060405180830381600087803b15801561217657600080fd5b505af1158015611daa573d6000803e3d6000fd5b6000611fb082846124a7565b60005b838110156121b1578181015183820152602001612199565b838111156113b85750506000910152565b60208152600082518060208401526121e1816040850160208701612196565b601f01601f19169190910160400192915050565b6001600160a01b0381168114610af657600080fd5b6000806040838503121561221d57600080fd5b8235612228816121f5565b946020939093013593505050565b60006020828403121561224857600080fd5b8135611fb0816121f5565b60006020828403121561226557600080fd5b5035919050565b60008060006060848603121561228157600080fd5b833561228c816121f5565b9250602084013561229c816121f5565b929592945050506040919091013590565b8015158114610af657600080fd5b600080604083850312156122ce57600080fd5b82356122d9816121f5565b915060208301356122e9816122ad565b809150509250929050565b60006020828403121561230657600080fd5b8135611fb0816122ad565b6000806040838503121561232457600080fd5b823561232f816121f5565b915060208301356122e9816121f5565b600181811c9082168061235357607f821691505b6020821081141561237457634e487b7160e01b600052602260045260246000fd5b50919050565b634e487b7160e01b600052601160045260246000fd5b60008160001904831182151516156123aa576123aa61237a565b500290565b6000826123cc57634e487b7160e01b600052601260045260246000fd5b500490565b600082198211156123e4576123e461237a565b500190565b6000602082840312156123fb57600080fd5b5051919050565b60006020828403121561241457600080fd5b8151611fb0816122ad565b60208082526025908201527f45524332303a207472616e736665722066726f6d20746865207a65726f206164604082015264647265737360d81b606082015260800190565b60208082526023908201527f45524332303a207472616e7366657220746f20746865207a65726f206164647260408201526265737360e81b606082015260800190565b6000828210156124b9576124b961237a565b500390565b600082516124d0818460208701612196565b9190910192915050565b634e487b7160e01b600052603260045260246000fd5b60006020828403121561250257600080fd5b8151611fb0816121f5565b600060a082018783526020878185015260a0604085015281875180845260c086019150828901935060005b8181101561255d5784516001600160a01b031683529383019391830191600101612538565b50506001600160a01b0396909616606085015250505060800152939250505056fea26469706673582212202439177aec709bb66d807e29a492ea10334d5f622bf398235c1b192daa68398164736f6c63430008090033