Token

Swords &amp; Dungeons GOLD (GOLD)

Feature Tip: Add private address tag to any address under My Name Tag !

ERC-20

Overview

Max Total Supply

28,626,063.000000000017301504 GOLD

Holders

1,139

Market

Onchain Market Cap

$0.00

Circulating Supply Market Cap

Other Info

Token Contract (WITH 18 Decimals)

0xA78BCBb74b822e74a847897d2D1d2d5EE2c76BD8

Filtered by Token Holder

0xaD6DEeEcA78DDCaF1dF33546e9756FdDf2240DA1

Balance

0.000000000000051214 GOLD

Value

$0.00

0xad6deeeca78ddcaf1df33546e9756fddf2240da1

Click here to update the token information / general information

#	Exchange	Pair	Price	24H Volume	% Volume

Contract Source Code Verified (Exact Match)

Contract Name:

Token

Compiler Version

v0.8.24+commit.e11b9ed9

Optimization Enabled:

Yes with 200 runs

Other Settings:

paris EvmVersion, MIT license

Contract Source Code (Solidity)

IDE

/**
 *Submitted for verification at Etherscan.io on 2024-08-25
*/

// Sources flattened with hardhat v2.22.2 https://hardhat.org

// SPDX-License-Identifier: MIT

// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}


// File @openzeppelin/contracts/access/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @openzeppelin/contracts/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`鈥檚 `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`鈥檚 approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`鈥檚 approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}


// File @openzeppelin/contracts/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}


// File @openzeppelin/contracts/utils/math/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // 鈫?`sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // 鈫?`2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;


/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}


// File @openzeppelin/contracts/utils/cryptography/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}


// File @openzeppelin/contracts/utils/cryptography/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;



/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}


// File @openzeppelin/contracts/utils/cryptography/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n 梅 2 + 1, and for v in (302): v 鈭?{27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}


// File contracts/Token.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity ^0.8.24;
contract Token is ERC20, Ownable, EIP712 {
    using ECDSA for bytes32;
    uint256 constant MAX = 1_000_000_000 * 1 ether;
    mapping(address => uint256) public nonces;
    address public signer;

    struct MintInfo {
        address recipient;
        uint256 nonce;
        uint256 amount;
        uint32 expired;
    }

    bytes32 constant MINTINFO_TYPEHASH =
        keccak256(
            "MintInfo(address recipient,uint256 nonce,uint256 amount,uint32 expired)"
        );

    constructor(
        address _signer
    )
        ERC20("Swords & Dungeons GOLD", "GOLD")
        Ownable(msg.sender)
        EIP712("Swords Dungeons Gold", "v1")
    {
        signer = _signer;
    }

    function setSigner(address _signer) public onlyOwner {
        require(_signer != address(0));
        signer = _signer;
    }

    function mint(address recipient, uint256 amount) external onlyOwner {
        uint256 total = totalSupply();
        require((total + amount) <= MAX, "over Max supply");
        _mint(recipient, amount);
    }

    function permitMint(
        uint256 amount,
        uint32 expired,
        bytes memory signature
    ) external {
        address recipient = _msgSender();
        MintInfo memory mintInfo = MintInfo({
            recipient: recipient,
            nonce: nonces[recipient],
            amount: amount,
            expired: expired
        });
        require(verify(mintInfo, signature), "signature is wrong");
        require(expired > block.timestamp, "expired");

        uint256 total = totalSupply();
        require((total + amount) <= MAX, "over Max supply");
        _mint(recipient, amount);
        nonces[recipient] += 1;
    }

    function getNonce(address user) public view returns (uint256 nonce) {
        nonce = nonces[user];
    }

    function hash(MintInfo memory mintInfo) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    MINTINFO_TYPEHASH,
                    mintInfo.recipient,
                    mintInfo.nonce,
                    mintInfo.amount,
                    mintInfo.expired
                )
            );
    }

    function verify(
        MintInfo memory mintInfo,
        bytes memory signature
    ) internal view returns (bool) {
        bytes32 digest = _hashTypedDataV4(hash(mintInfo));
        address addr = digest.recover(signature);
        return addr == signer;
    }
}

Contract Security Audit

No Contract Security Audit Submitted- Submit Audit Here

Contract ABI

[{"inputs":[{"internalType":"address","name":"_signer","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"}],"name":"getNonce","outputs":[{"internalType":"uint256","name":"nonce","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint32","name":"expired","type":"uint32"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"permitMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_signer","type":"address"}],"name":"setSigner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"signer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

Contract Creation Code

Decompile Bytecode Switch to Opcodes View

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

Deployed Bytecode

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

0000000000000000000000001d4f4c4c1247063593256cfa0845a9181d6731b6

-----Decoded View---------------
Arg [0] : _signer (address): 0x1D4F4c4C1247063593256CfA0845A9181d6731b6

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000001d4f4c4c1247063593256cfa0845a9181d6731b6

Deployed Bytecode Sourcemap

74624:2524:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;16918:91;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;19211:190;;;;;;:::i;:::-;;:::i;:::-;;;1269:14:1;;1262:22;1244:41;;1232:2;1217:18;19211:190:0;1104:187:1;18020:99:0;18099:12;;18020:99;;;1442:25:1;;;1430:2;1415:18;18020:99:0;1296:177:1;74803:21:0;;;;;-1:-1:-1;;;;;74803:21:0;;;;;;-1:-1:-1;;;;;1642:32:1;;;1624:51;;1612:2;1597:18;74803:21:0;1478:203:1;19979:249:0;;;;;;:::i;:::-;;:::i;76373:107::-;;;;;;:::i;:::-;-1:-1:-1;;;;;76460:12:0;76426:13;76460:12;;;:6;:12;;;;;;;76373:107;17871:84;;;17945:2;2352:36:1;;2340:2;2325:18;17871:84:0;2210:184:1;75705:660:0;;;;;;:::i;:::-;;:::i;:::-;;75484:213;;;;;;:::i;:::-;;:::i;75347:129::-;;;;;;:::i;:::-;;:::i;18182:118::-;;;;;;:::i;:::-;-1:-1:-1;;;;;18274:18:0;18247:7;18274:18;;;;;;;;;;;;18182:118;3571:103;;;:::i;74755:41::-;;;;;;:::i;:::-;;;;;;;;;;;;;;64999:580;;;:::i;:::-;;;;;;;;;;;;;:::i;2896:87::-;2969:6;;-1:-1:-1;;;;;2969:6:0;2896:87;;17128:95;;;:::i;18505:182::-;;;;;;:::i;:::-;;:::i;18750:142::-;;;;;;:::i;:::-;-1:-1:-1;;;;;18857:18:0;;;18830:7;18857:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;18750:142;3829:220;;;;;;:::i;:::-;;:::i;16918:91::-;16963:13;16996:5;16989:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;16918:91;:::o;19211:190::-;19284:4;930:10;19340:31;930:10;19356:7;19365:5;19340:8;:31::i;:::-;19389:4;19382:11;;;19211:190;;;;;:::o;19979:249::-;20066:4;930:10;20124:37;20140:4;930:10;20155:5;20124:15;:37::i;:::-;20172:26;20182:4;20188:2;20192:5;20172:9;:26::i;:::-;-1:-1:-1;20216:4:0;;19979:249;-1:-1:-1;;;;19979:249:0:o;75705:660::-;75905:155;;;;;;;;930:10;75905:155;;;75835:17;75971;;;:6;75905:155;75971:17;;;;;;;;75905:155;;;;;;;;;;;;;;;;;76079:27;75905:155;76096:9;76079:6;:27::i;:::-;76071:58;;;;-1:-1:-1;;;76071:58:0;;5805:2:1;76071:58:0;;;5787:21:1;5844:2;5824:18;;;5817:30;-1:-1:-1;;;5863:18:1;;;5856:48;5921:18;;76071:58:0;;;;;;;;;76158:15;76148:7;:25;;;76140:45;;;;-1:-1:-1;;;76140:45:0;;6152:2:1;76140:45:0;;;6134:21:1;6191:1;6171:18;;;6164:29;-1:-1:-1;;;6209:18:1;;;6202:37;6256:18;;76140:45:0;5950:330:1;76140:45:0;76198:13;76214;18099:12;;;18020:99;76214:13;76198:29;-1:-1:-1;74725:23:0;76247:14;76255:6;76198:29;76247:14;:::i;:::-;76246:23;;76238:51;;;;-1:-1:-1;;;76238:51:0;;6714:2:1;76238:51:0;;;6696:21:1;6753:2;6733:18;;;6726:30;-1:-1:-1;;;6772:18:1;;;6765:45;6827:18;;76238:51:0;6512:339:1;76238:51:0;76300:24;76306:9;76317:6;76300:5;:24::i;:::-;-1:-1:-1;;;;;76335:17:0;;;;;;:6;:17;;;;;:22;;76356:1;;76335:17;:22;;76356:1;;76335:22;:::i;:::-;;;;-1:-1:-1;;;;;;;;75705:660:0:o;75484:213::-;2782:13;:11;:13::i;:::-;75563::::1;75579;18099:12:::0;;;18020:99;75579:13:::1;75563:29:::0;-1:-1:-1;74725:23:0::1;75612:14;75620:6:::0;75563:29;75612:14:::1;:::i;:::-;75611:23;;75603:51;;;::::0;-1:-1:-1;;;75603:51:0;;6714:2:1;75603:51:0::1;::::0;::::1;6696:21:1::0;6753:2;6733:18;;;6726:30;-1:-1:-1;;;6772:18:1;;;6765:45;6827:18;;75603:51:0::1;6512:339:1::0;75603:51:0::1;75665:24;75671:9;75682:6;75665:5;:24::i;:::-;75552:145;75484:213:::0;;:::o;75347:129::-;2782:13;:11;:13::i;:::-;-1:-1:-1;;;;;75419:21:0;::::1;75411:30;;;::::0;::::1;;75452:6;:16:::0;;-1:-1:-1;;;;;;75452:16:0::1;-1:-1:-1::0;;;;;75452:16:0;;;::::1;::::0;;;::::1;::::0;;75347:129::o;3571:103::-;2782:13;:11;:13::i;:::-;3636:30:::1;3663:1;3636:18;:30::i;:::-;3571:103::o:0;64999:580::-;65102:13;65130:18;65163:21;65199:15;65229:25;65269:12;65296:27;65404:13;:11;:13::i;:::-;65432:16;:14;:16::i;:::-;65544;;;65527:1;65544:16;;;;;;;;;-1:-1:-1;;;65351:220:0;;;-1:-1:-1;65351:220:0;;-1:-1:-1;65463:13:0;;-1:-1:-1;65499:4:0;;-1:-1:-1;65527:1:0;-1:-1:-1;65544:16:0;-1:-1:-1;65351:220:0;-1:-1:-1;64999:580:0:o;17128:95::-;17175:13;17208:7;17201:14;;;;;:::i;18505:182::-;18574:4;930:10;18630:27;930:10;18647:2;18651:5;18630:9;:27::i;3829:220::-;2782:13;:11;:13::i;:::-;-1:-1:-1;;;;;3914:22:0;::::1;3910:93;;3960:31;::::0;-1:-1:-1;;;3960:31:0;;3988:1:::1;3960:31;::::0;::::1;1624:51:1::0;1597:18;;3960:31:0::1;1478:203:1::0;3910:93:0::1;4013:28;4032:8;4013:18;:28::i;:::-;3829:220:::0;:::o;24038:130::-;24123:37;24132:5;24139:7;24148:5;24155:4;24123:8;:37::i;25754:487::-;-1:-1:-1;;;;;18857:18:0;;;25854:24;18857:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;-1:-1:-1;;25921:37:0;;25917:317;;25998:5;25979:16;:24;25975:132;;;26031:60;;-1:-1:-1;;;26031:60:0;;-1:-1:-1;;;;;7076:32:1;;26031:60:0;;;7058:51:1;7125:18;;;7118:34;;;7168:18;;;7161:34;;;7031:18;;26031:60:0;6856:345:1;25975:132:0;26150:57;26159:5;26166:7;26194:5;26175:16;:24;26201:5;26150:8;:57::i;:::-;25843:398;25754:487;;;:::o;20613:308::-;-1:-1:-1;;;;;20697:18:0;;20693:88;;20739:30;;-1:-1:-1;;;20739:30:0;;20766:1;20739:30;;;1624:51:1;1597:18;;20739:30:0;1478:203:1;20693:88:0;-1:-1:-1;;;;;20795:16:0;;20791:88;;20835:32;;-1:-1:-1;;;20835:32:0;;20864:1;20835:32;;;1624:51:1;1597:18;;20835:32:0;1478:203:1;20791:88:0;20889:24;20897:4;20903:2;20907:5;20889:7;:24::i;76874:271::-;76988:4;77005:14;77022:32;77039:14;77044:8;77039:4;:14::i;:::-;77022:16;:32::i;:::-;77005:49;-1:-1:-1;77065:12:0;77080:25;77005:49;77095:9;77080:14;:25::i;:::-;77131:6;;-1:-1:-1;;;;;77131:6:0;;;77123:14;;;;76874:271;-1:-1:-1;;;;;76874:271:0:o;22733:213::-;-1:-1:-1;;;;;22804:21:0;;22800:93;;22849:32;;-1:-1:-1;;;22849:32:0;;22878:1;22849:32;;;1624:51:1;1597:18;;22849:32:0;1478:203:1;22800:93:0;22903:35;22919:1;22923:7;22932:5;22903:7;:35::i;:::-;22733:213;;:::o;3061:166::-;2969:6;;-1:-1:-1;;;;;2969:6:0;930:10;3121:23;3117:103;;3168:40;;-1:-1:-1;;;3168:40:0;;930:10;3168:40;;;1624:51:1;1597:18;;3168:40:0;1478:203:1;4209:191:0;4302:6;;;-1:-1:-1;;;;;4319:17:0;;;-1:-1:-1;;;;;;4319:17:0;;;;;;;4352:40;;4302:6;;;4319:17;4302:6;;4352:40;;4283:16;;4352:40;4272:128;4209:191;:::o;65908:128::-;65954:13;65987:41;:5;66014:13;65987:26;:41::i;:::-;65980:48;;65908:128;:::o;66371:137::-;66420:13;66453:47;:8;66483:16;66453:29;:47::i;25019:443::-;-1:-1:-1;;;;;25132:19:0;;25128:91;;25175:32;;-1:-1:-1;;;25175:32:0;;25204:1;25175:32;;;1624:51:1;1597:18;;25175:32:0;1478:203:1;25128:91:0;-1:-1:-1;;;;;25233:21:0;;25229:92;;25278:31;;-1:-1:-1;;;25278:31:0;;25306:1;25278:31;;;1624:51:1;1597:18;;25278:31:0;1478:203:1;25229:92:0;-1:-1:-1;;;;;25331:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;:35;;;25377:78;;;;25428:7;-1:-1:-1;;;;;25412:31:0;25421:5;-1:-1:-1;;;;;25412:31:0;;25437:5;25412:31;;;;1442:25:1;;1430:2;1415:18;;1296:177;25412:31:0;;;;;;;;25019:443;;;;:::o;21245:1135::-;-1:-1:-1;;;;;21335:18:0;;21331:552;;21489:5;21473:12;;:21;;;;;;;:::i;:::-;;;;-1:-1:-1;21331:552:0;;-1:-1:-1;21331:552:0;;-1:-1:-1;;;;;21549:15:0;;21527:19;21549:15;;;;;;;;;;;21583:19;;;21579:117;;;21630:50;;-1:-1:-1;;;21630:50:0;;-1:-1:-1;;;;;7076:32:1;;21630:50:0;;;7058:51:1;7125:18;;;7118:34;;;7168:18;;;7161:34;;;7031:18;;21630:50:0;6856:345:1;21579:117:0;-1:-1:-1;;;;;21819:15:0;;:9;:15;;;;;;;;;;21837:19;;;;21819:37;;21331:552;-1:-1:-1;;;;;21899:16:0;;21895:435;;22065:12;:21;;;;;;;21895:435;;;-1:-1:-1;;;;;22281:13:0;;:9;:13;;;;;;;;;;:22;;;;;;21895:435;22362:2;-1:-1:-1;;;;;22347:25:0;22356:4;-1:-1:-1;;;;;22347:25:0;;22366:5;22347:25;;;;1442::1;;1430:2;1415:18;;1296:177;22347:25:0;;;;;;;;21245:1135;;;:::o;76488:378::-;76551:7;75013:108;76692:8;:18;;;76733:8;:14;;;76770:8;:15;;;76808:8;:16;;;76619:224;;;;;;;;;;;7463:25:1;;;-1:-1:-1;;;;;7524:32:1;;;;7519:2;7504:18;;7497:60;7588:2;7573:18;;7566:34;;;;7631:2;7616:18;;7609:34;7692:10;7680:23;7674:3;7659:19;;7652:52;7450:3;7435:19;;7206:504;76619:224:0;;;;;;;;;;;;;76591:267;;;;;;76571:287;;76488:378;;;:::o;64765:178::-;64842:7;64869:66;64902:20;:18;:20::i;:::-;64924:10;50994:4;50988:11;-1:-1:-1;;;51013:23:0;;51066:4;51057:14;;51050:39;;;;51119:4;51110:14;;51103:34;51176:4;51161:20;;;50789:410;70396:259;70474:7;70495:17;70514:18;70534:16;70554:27;70565:4;70571:9;70554:10;:27::i;:::-;70494:87;;;;;;70592:28;70604:5;70611:8;70592:11;:28::i;:::-;-1:-1:-1;70638:9:0;;70396:259;-1:-1:-1;;;;70396:259:0:o;58878:273::-;58972:13;56824:66;59002:46;;58998:146;;59072:15;59081:5;59072:8;:15::i;:::-;59065:22;;;;58998:146;59127:5;59120:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;63666:268;63719:7;63751:4;-1:-1:-1;;;;;63760:11:0;63743:28;;:63;;;;;63792:14;63775:13;:31;63743:63;63739:188;;;-1:-1:-1;63830:22:0;;63666:268::o;63739:188::-;63892:23;64034:80;;;61858:95;64034:80;;;8288:25:1;64056:11:0;8329:18:1;;;8322:34;;;;64069:14:0;8372:18:1;;;8365:34;64085:13:0;8415:18:1;;;8408:34;64108:4:0;8458:19:1;;;8451:61;63997:7:0;;8260:19:1;;64034:80:0;;;;;;;;;;;;64024:91;;;;;;64017:98;;63942:181;;68790:783;68871:7;68880:12;68894:7;68918:9;:16;68938:2;68918:22;68914:652;;69262:4;69247:20;;69241:27;69312:4;69297:20;;69291:27;69370:4;69355:20;;69349:27;68957:9;69341:36;69413:25;69424:4;69341:36;69241:27;69291;69413:10;:25::i;:::-;69406:32;;;;;;;;;;;68914:652;-1:-1:-1;;69536:16:0;;69487:1;;-1:-1:-1;69491:35:0;;68914:652;68790:783;;;;;:::o;73965:542::-;74061:20;74052:5;:29;;;;;;;;:::i;:::-;;74048:452;;73965:542;;:::o;74048:452::-;74159:29;74150:5;:38;;;;;;;;:::i;:::-;;74146:354;;74212:23;;-1:-1:-1;;;74212:23:0;;;;;;;;;;;74146:354;74266:35;74257:5;:44;;;;;;;;:::i;:::-;;74253:247;;74325:46;;-1:-1:-1;;;74325:46:0;;;;;1442:25:1;;;1415:18;;74325:46:0;1296:177:1;74253:247:0;74402:30;74393:5;:39;;;;;;;;:::i;:::-;;74389:111;;74456:32;;-1:-1:-1;;;74456:32:0;;;;;1442:25:1;;;1415:18;;74456:32:0;1296:177:1;57533:415:0;57592:13;57618:11;57632:16;57643:4;57632:10;:16::i;:::-;57758:14;;;57769:2;57758:14;;;;;;;;;57618:30;;-1:-1:-1;57738:17:0;;57758:14;;;;;;;;;-1:-1:-1;;;57851:16:0;;;-1:-1:-1;57897:4:0;57888:14;;57881:28;;;;-1:-1:-1;57851:16:0;57533:415::o;71867:1557::-;71998:7;;;72942:66;72929:79;;72925:166;;;-1:-1:-1;73041:1:0;;-1:-1:-1;73045:30:0;;-1:-1:-1;73077:1:0;73025:54;;72925:166;73205:24;;;73188:14;73205:24;;;;;;;;;8750:25:1;;;8823:4;8811:17;;8791:18;;;8784:45;;;;8845:18;;;8838:34;;;8888:18;;;8881:34;;;73205:24:0;;8722:19:1;;73205:24:0;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;73205:24:0;;-1:-1:-1;;73205:24:0;;;-1:-1:-1;;;;;;;73244:20:0;;73240:115;;-1:-1:-1;73297:1:0;;-1:-1:-1;73301:29:0;;-1:-1:-1;73297:1:0;;-1:-1:-1;73281:62:0;;73240:115;73375:6;-1:-1:-1;73383:20:0;;-1:-1:-1;73383:20:0;;-1:-1:-1;71867:1557:0;;;;;;;;;:::o;58025:251::-;58086:7;58159:4;58123:40;;58187:2;58178:11;;58174:71;;;58213:20;;-1:-1:-1;;;58213:20:0;;;;;;;;;;;14:423:1;56:3;94:5;88:12;121:6;116:3;109:19;146:1;156:162;170:6;167:1;164:13;156:162;;;232:4;288:13;;;284:22;;278:29;260:11;;;256:20;;249:59;185:12;156:162;;;160:3;363:1;356:4;347:6;342:3;338:16;334:27;327:38;426:4;419:2;415:7;410:2;402:6;398:15;394:29;389:3;385:39;381:50;374:57;;;14:423;;;;:::o;442:220::-;591:2;580:9;573:21;554:4;611:45;652:2;641:9;637:18;629:6;611:45;:::i;:::-;603:53;442:220;-1:-1:-1;;;442:220:1:o;667:173::-;735:20;;-1:-1:-1;;;;;784:31:1;;774:42;;764:70;;830:1;827;820:12;764:70;667:173;;;:::o;845:254::-;913:6;921;974:2;962:9;953:7;949:23;945:32;942:52;;;990:1;987;980:12;942:52;1013:29;1032:9;1013:29;:::i;:::-;1003:39;1089:2;1074:18;;;;1061:32;;-1:-1:-1;;;845:254:1:o;1686:328::-;1763:6;1771;1779;1832:2;1820:9;1811:7;1807:23;1803:32;1800:52;;;1848:1;1845;1838:12;1800:52;1871:29;1890:9;1871:29;:::i;:::-;1861:39;;1919:38;1953:2;1942:9;1938:18;1919:38;:::i;:::-;1909:48;;2004:2;1993:9;1989:18;1976:32;1966:42;;1686:328;;;;;:::o;2019:186::-;2078:6;2131:2;2119:9;2110:7;2106:23;2102:32;2099:52;;;2147:1;2144;2137:12;2099:52;2170:29;2189:9;2170:29;:::i;2399:127::-;2460:10;2455:3;2451:20;2448:1;2441:31;2491:4;2488:1;2481:15;2515:4;2512:1;2505:15;2531:1153;2616:6;2624;2632;2685:2;2673:9;2664:7;2660:23;2656:32;2653:52;;;2701:1;2698;2691:12;2653:52;2737:9;2724:23;2714:33;;2797:2;2786:9;2782:18;2769:32;2841:10;2834:5;2830:22;2823:5;2820:33;2810:61;;2867:1;2864;2857:12;2810:61;2890:5;-1:-1:-1;2946:2:1;2931:18;;2918:32;2969:18;2999:14;;;2996:34;;;3026:1;3023;3016:12;2996:34;3064:6;3053:9;3049:22;3039:32;;3109:7;3102:4;3098:2;3094:13;3090:27;3080:55;;3131:1;3128;3121:12;3080:55;3167:2;3154:16;3189:2;3185;3182:10;3179:36;;;3195:18;;:::i;:::-;3270:2;3264:9;3238:2;3324:13;;-1:-1:-1;;3320:22:1;;;3344:2;3316:31;3312:40;3300:53;;;3368:18;;;3388:22;;;3365:46;3362:72;;;3414:18;;:::i;:::-;3454:10;3450:2;3443:22;3489:2;3481:6;3474:18;3529:7;3524:2;3519;3515;3511:11;3507:20;3504:33;3501:53;;;3550:1;3547;3540:12;3501:53;3606:2;3601;3597;3593:11;3588:2;3580:6;3576:15;3563:46;3651:1;3646:2;3641;3633:6;3629:15;3625:24;3618:35;3672:6;3662:16;;;;;;;2531:1153;;;;;:::o;3689:1259::-;4095:3;4090;4086:13;4078:6;4074:26;4063:9;4056:45;4037:4;4120:2;4158:3;4153:2;4142:9;4138:18;4131:31;4185:46;4226:3;4215:9;4211:19;4203:6;4185:46;:::i;:::-;4279:9;4271:6;4267:22;4262:2;4251:9;4247:18;4240:50;4313:33;4339:6;4331;4313:33;:::i;:::-;4377:2;4362:18;;4355:34;;;-1:-1:-1;;;;;4426:32:1;;4420:3;4405:19;;4398:61;4446:3;4475:19;;4468:35;;;4540:22;;;4534:3;4519:19;;4512:51;4612:13;;4634:22;;;4684:2;4710:15;;;;-1:-1:-1;4672:15:1;;;;-1:-1:-1;4753:169:1;4767:6;4764:1;4761:13;4753:169;;;4828:13;;4816:26;;4897:15;;;;4862:12;;;;4789:1;4782:9;4753:169;;;-1:-1:-1;4939:3:1;;3689:1259;-1:-1:-1;;;;;;;;;;;;3689:1259:1:o;4953:260::-;5021:6;5029;5082:2;5070:9;5061:7;5057:23;5053:32;5050:52;;;5098:1;5095;5088:12;5050:52;5121:29;5140:9;5121:29;:::i;:::-;5111:39;;5169:38;5203:2;5192:9;5188:18;5169:38;:::i;:::-;5159:48;;4953:260;;;;;:::o;5218:380::-;5297:1;5293:12;;;;5340;;;5361:61;;5415:4;5407:6;5403:17;5393:27;;5361:61;5468:2;5460:6;5457:14;5437:18;5434:38;5431:161;;5514:10;5509:3;5505:20;5502:1;5495:31;5549:4;5546:1;5539:15;5577:4;5574:1;5567:15;5431:161;;5218:380;;;:::o;6285:222::-;6350:9;;;6371:10;;;6368:133;;;6423:10;6418:3;6414:20;6411:1;6404:31;6458:4;6455:1;6448:15;6486:4;6483:1;6476:15;7715:127;7776:10;7771:3;7767:20;7764:1;7757:31;7807:4;7804:1;7797:15;7831:4;7828:1;7821:15

Swarm Source

ipfs://0a448d03d06e477b3520c784b1ccc9bb6477be9638c239f6b93288663db309c4

A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.

Tools & Services

Token

Overview

Max Total Supply

Holders

Market

Onchain Market Cap

Circulating Supply Market Cap

Other Info

Token Contract (WITH 18 Decimals)

Filtered by Token Holder

Balance

Value

Contract Source Code Verified (Exact Match)

Contract Source Code (Solidity)

Contract Security Audit

Contract ABI

Contract Creation Code

Deployed Bytecode

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

Deployed Bytecode Sourcemap

Swarm Source