Token

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

contract SporeToken is ERC20("SporeFinance", "SPORE"), Ownable {
    using SafeMath for uint256;

    /* ========== STATE VARIABLES ========== */
    mapping(address => bool) public minters;
    address public initialLiquidityManager;

    bool internal _transfersEnabled;
    mapping(address => bool) internal _canTransferInitialLiquidity;

    /* ========== CONSTRUCTOR ========== */

    constructor(address initialLiquidityManager_) public {
        _transfersEnabled = false;
        minters[msg.sender] = true;
        initialLiquidityManager = initialLiquidityManager_;
        _canTransferInitialLiquidity[msg.sender] = true;
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    /// @notice Transfer is enabled as normal except during an initial phase
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        require(_transfersEnabled || _canTransferInitialLiquidity[msg.sender], "SporeToken: transfers not enabled");

        return super.transfer(recipient, amount);
    }

    /// @notice TransferFrom is enabled as normal except during an initial phase
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        require(_transfersEnabled || _canTransferInitialLiquidity[msg.sender], "SporeToken: transfers not enabled");

        return super.transferFrom(sender, recipient, amount);
    }

    /// @notice Any account is entitled to burn their own tokens
    function burn(uint256 amount) public {
        require(amount > 0);
        require(balanceOf(msg.sender) >= amount);
        _burn(msg.sender, amount);
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    function mint(address to, uint256 amount) public onlyMinter {
        _mint(to, amount);
    }

    function addInitialLiquidityTransferRights(address account) public onlyInitialLiquidityManager {
        require(!_transfersEnabled, "SporeToken: cannot add initial liquidity transfer rights after global transfers enabled");
        _canTransferInitialLiquidity[account] = true;
    }

    /// @notice One time acion to enable global transfers after the initial liquidity is supplied.
    function enableTransfers() public onlyInitialLiquidityManager {
        _transfersEnabled = true;
    }

    function addMinter(address account) public onlyOwner {
        minters[account] = true;
    }

    function removeMinter(address account) public onlyOwner {
        minters[account] = false;
    }

    modifier onlyMinter() {
        require(minters[msg.sender], "Restricted to minters.");
        _;
    }

    modifier onlyInitialLiquidityManager() {
        require(initialLiquidityManager == msg.sender, "Restricted to initial liquidity manager.");
        _;
    }
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/access/Ownable.sol";

/*
    Approve Contracts to interact with pools.
    (All contracts are barred from interacting with pools by default.)
*/
contract ApprovedContractList is Ownable {
    mapping (address => bool) approved;
    function isApproved(address toCheck) external returns (bool) {
        return approved[toCheck];
    }
    function approveContract(address toApprove) external onlyOwner {
        approved[toApprove] = true;
    }

    function revokeContract(address toRevoke) external onlyOwner {
        approved[toRevoke] = false;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

pragma solidity ^0.6.0;

import "./ApprovedContractList.sol";

/*
    Prevent smart contracts from calling functions unless approved by the specified whitelist.
*/
contract Defensible {
 // Only smart contracts will be affected by this modifier
  modifier defend(ApprovedContractList approvedContractList) {
    require(
      (msg.sender == tx.origin) || approvedContractList.isApproved(msg.sender),
      "This smart contract has not been approved"
    );
    _;
  }
}

/* 
    - Stake up to X mushrooms per user (dao can change)
    - Reward mushroom yield rate for lifespan
    - When dead, burn mushroom erc721
    - Distribute 5% of ENOKI rewards to Chefs
*/
pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts-ethereum-package/contracts/access/Ownable.sol";

import "./TokenPool.sol";
import "./Defensible.sol";
import "./MushroomNFT.sol";
import "./MushroomLib.sol";

import "./metadata/MushroomMetadata.sol";

/**
 * @title Enoki Geyser
 * @dev A smart-contract based mechanism to distribute tokens over time, inspired loosely by
 *      Compound and Uniswap.
 *
 *      Distribution tokens are added to a locked pool in the contract and become unlocked over time
 *      according to a once-configurable unlock schedule. Once unlocked, they are available to be
 *      claimed by users.
 *
 *      A user may deposit tokens to accrue ownership share over the unlocked pool. This owner share
 *      is a function of the number of tokens deposited as well as the length of time deposited.
 *      Specifically, a user's share of the currently-unlocked pool equals their "deposit-seconds"
 *      divided by the global "deposit-seconds". This aligns the new token distribution with long
 *      term supporters of the project, addressing one of the major drawbacks of simple airdrops.
 *
 *      More background and motivation available at:
 *      https://github.com/ampleforth/RFCs/blob/master/RFCs/rfc-1.md
 */
contract EnokiGeyser is Initializable, OwnableUpgradeSafe, Defensible {
    using SafeMath for uint256;
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;

    event Staked(address indexed user, address nftContract, uint256 nftId, uint256 total, bytes data);
    event Unstaked(address indexed user, address nftContract, uint256 nftId, uint256 total, bytes data);
    event TokensClaimed(address indexed user, uint256 amount);
    event TokensLocked(uint256 amount, uint256 durationSec, uint256 total);
    // amount: Unlocked tokens, total: Total locked tokens
    event TokensUnlocked(uint256 amount, uint256 total);

    TokenPool private _unlockedPool;
    TokenPool private _lockedPool;

    MushroomMetadata public mushroomMetadata;

    //
    // Time-bonus params
    //
    uint256 public constant BONUS_DECIMALS = 2;
    uint256 public startBonus = 0;
    uint256 public bonusPeriodSec = 0;

    uint256 public maxStakesPerAddress = 0;

    //
    // Global accounting state
    //
    uint256 public totalLockedShares = 0;
    uint256 public totalStakingShares = 0;
    uint256 public totalStrengthStaked = 0;
    uint256 private _totalStakingShareSeconds = 0;
    uint256 private _lastAccountingTimestampSec = now;
    uint256 private _maxUnlockSchedules = 0;
    uint256 private _initialSharesPerToken = 0;

    //
    // Dev reward state
    //
    uint256 public constant MAX_PERCENTAGE = 100;
    uint256 public devRewardPercentage = 0; //0% - 100%
    address public devRewardAddress;

    address public admin;
    ApprovedContractList public approvedContractList;

    //
    // User accounting state
    //
    // Represents a single stake for a user. A user may have multiple.
    struct Stake {
        address nftContract;
        uint256 nftIndex;
        uint256 stakingShares;
        uint256 timestampSec;
    }

    // Caches aggregated values from the User->Stake[] map to save computation.
    // If lastAccountingTimestampSec is 0, there's no entry for that user.
    struct UserTotals {
        uint256 stakingShares;
        uint256 stakingShareSeconds;
        uint256 lastAccountingTimestampSec;
    }

    // Aggregated staking values per user
    mapping(address => UserTotals) private _userTotals;

    // The collection of stakes for each user. Ordered by timestamp, earliest to latest.
    mapping(address => Stake[]) private _userStakes;

    //
    // Locked/Unlocked Accounting state
    //
    struct UnlockSchedule {
        uint256 initialLockedShares;
        uint256 unlockedShares;
        uint256 lastUnlockTimestampSec;
        uint256 endAtSec;
        uint256 durationSec;
    }

    UnlockSchedule[] public unlockSchedules;

    /**
     * @param distributionToken The token users receive as they unstake.
     * @param maxUnlockSchedules Max number of unlock stages, to guard against hitting gas limit.
     * @param startBonus_ Starting time bonus, BONUS_DECIMALS fixed point.
     *                    e.g. 25% means user gets 25% of max distribution tokens.
     * @param bonusPeriodSec_ Length of time for bonus to increase linearly to max.
     * @param initialSharesPerToken Number of shares to mint per staking token on first stake.
     * @param maxStakesPerAddress_ Maximum number of NFTs stakeable by a given account.
     * @param devRewardAddress_ Recipient address of dev rewards.
     * @param devRewardPercentage_ Pecentage of rewards claimed to be distributed for dev address.

     */
    function initialize(
        IERC20 distributionToken,
        uint256 maxUnlockSchedules,
        uint256 startBonus_,
        uint256 bonusPeriodSec_,
        uint256 initialSharesPerToken,
        uint256 maxStakesPerAddress_,
        address devRewardAddress_,
        uint256 devRewardPercentage_,
        address approvedContractList_,
        address admin_
    ) public initializer {
        // The start bonus must be some fraction of the max. (i.e. <= 100%)
        require(startBonus_ <= 10**BONUS_DECIMALS, "EnokiGeyser: start bonus too high");
        // If no period is desired, instead set startBonus = 100%
        // and bonusPeriod to a small value like 1sec.
        require(bonusPeriodSec_ != 0, "EnokiGeyser: bonus period is zero");
        require(initialSharesPerToken > 0, "EnokiGeyser: initialSharesPerToken is zero");

        // The dev reward must be some fraction of the max. (i.e. <= 100%)
        require(devRewardPercentage_ <= MAX_PERCENTAGE, "EnokiGeyser: dev reward too high");
        
        __Ownable_init();

        _unlockedPool = new TokenPool(distributionToken);
        _lockedPool = new TokenPool(distributionToken);
        startBonus = startBonus_;
        bonusPeriodSec = bonusPeriodSec_;
        _maxUnlockSchedules = maxUnlockSchedules;
        _initialSharesPerToken = initialSharesPerToken;
        maxStakesPerAddress = maxStakesPerAddress_;

        devRewardPercentage = devRewardPercentage_;
        devRewardAddress = devRewardAddress_;

        admin = admin_;

        approvedContractList = ApprovedContractList(approvedContractList_);
    }

    // TODO: Add a method for per-index staking access
    function isNftStakeable(address nftContract) public view returns (bool) {
        return mushroomMetadata.hasMetadataResolver(nftContract);
    }

    modifier onlyAdmin() {
        require(admin == msg.sender, "EnokiGeyser: Only Admin");
        _;
    }

    // Only effects future stakes
    function setMaxStakesPerAddress(uint256 maxStakes) public onlyAdmin {
        maxStakesPerAddress = maxStakes;
    }

    function setMushroomMetadata(address mushroomMetadata_) public onlyAdmin {
        mushroomMetadata = MushroomMetadata(mushroomMetadata_);
    }

    /**
     * @return The token users receive as they unstake.
     */
    function getDistributionToken() public view returns (IERC20) {
        assert(_unlockedPool.token() == _lockedPool.token());
        return _unlockedPool.token();
    }

    /**
     * @dev Transfers amount of deposit tokens from the user.
     * @param data Not used.
     */
    function stake(
        address nftContract,
        uint256 nftIndex,
        bytes calldata data
    ) external defend(approvedContractList) {
        require(isNftStakeable(nftContract), "EnokiGeyser: nft not stakeable");
        _stakeFor(msg.sender, msg.sender, nftContract, nftIndex);
    }

    /**
     * @dev Private implementation of staking methods.
     * @param staker User address who deposits tokens to stake.
     * @param beneficiary User address who gains credit for this stake operation.
     */
    function _stakeFor(
        address staker,
        address beneficiary,
        address nftContract,
        uint256 nftIndex
    ) private {
        require(beneficiary != address(0), "EnokiGeyser: beneficiary is zero address");
        require(totalStakingShares == 0 || totalStaked() > 0, "EnokiGeyser: Invalid state. Staking shares exist, but no staking tokens do");
        require(isNftStakeable(nftContract), "EnokiGeyser: Nft contract specified not stakeable");

        // Shares is determined by NFT mushroom rate

        MushroomLib.MushroomData memory metadata = mushroomMetadata.getMushroomData(nftContract, nftIndex, "");

        uint256 mintedStakingShares = (totalStakingShares > 0)
            ? totalStakingShares.mul(metadata.strength).div(totalStaked())
            : metadata.strength.mul(_initialSharesPerToken);
        require(mintedStakingShares > 0, "EnokiGeyser: Stake amount is too small");

        updateAccounting();

        // 1. User Accounting
        UserTotals storage totals = _userTotals[beneficiary];
        totals.stakingShares = totals.stakingShares.add(mintedStakingShares);
        totals.lastAccountingTimestampSec = now;

        Stake memory newStake = Stake(nftContract, nftIndex, mintedStakingShares, now);
        _userStakes[beneficiary].push(newStake);

        require(_userStakes[beneficiary].length <= maxStakesPerAddress, "EnokiGeyser: Stake would exceed maximum stakes for address");

        // 2. Global Accounting
        totalStakingShares = totalStakingShares.add(mintedStakingShares);
        // Already set in updateAccounting()
        // _lastAccountingTimestampSec = now;

        // interactions - rather than taking staking tokens, we take the NFT and track the amount staked locally
        // require(_stakingPool.token().transferFrom(staker, address(_stakingPool), amount), "EnokiGeyser: transfer into staking pool failed");

        totalStrengthStaked = totalStrengthStaked.add(metadata.strength);
        IERC721(nftContract).transferFrom(staker, address(this), nftIndex);

        emit Staked(beneficiary, nftContract, nftIndex, totalStakedFor(beneficiary), "");
    }

    /**
     * @dev Unstakes a certain amount of previously deposited tokens. User also receives their
     * alotted number of distribution tokens.
     * @param stakes Mushrooms to unstake.
     * @param data Not used.
     */
    function unstake(uint256[] calldata stakes, bytes calldata data) external {
        _unstake(stakes);
    }

    /**
     * @param stakes Mushrooms to unstake.
     */
    function unstakeQuery(uint256[] memory stakes)
        public
        returns (
            uint256 totalReward,
            uint256 userReward,
            uint256 devReward
        )
    {
        return _unstake(stakes);
    }

    /**
     * @dev Unstakes a certain amount of previously deposited tokens. User also receives their
     * alotted number of distribution tokens.
     * @param stakes Mushrooms to unstake.
     */
    function _unstake(uint256[] memory stakes)
        private
        returns (
            uint256 totalReward,
            uint256 userReward,
            uint256 devReward
        )
    {
        updateAccounting();

        // 1. User Accounting
        UserTotals storage totals = _userTotals[msg.sender];
        Stake[] storage accountStakes = _userStakes[msg.sender];

        // Redeem from most recent stake and go backwards in time.
        uint256 rewardAmount = 0;

        for (uint256 i = 0; i < stakes.length; i++) {
            Stake storage lastStake = accountStakes[i];

            MushroomLib.MushroomData memory metadata = mushroomMetadata.getMushroomData(lastStake.nftContract, lastStake.nftIndex, "");
            uint256 lifespanUsed = now.sub(lastStake.timestampSec);

            // fully redeem a past stake
            uint256 stakingShareSecondsToBurn = lastStake.stakingShares.mul(lifespanUsed);
            rewardAmount = computeNewReward(rewardAmount, stakingShareSecondsToBurn, lifespanUsed);

            bool toBurn = false;

            if (metadata.lifespan <= lifespanUsed) {
                lifespanUsed = metadata.lifespan;
                toBurn = true;
            }

            // Update global aomunt staked
            totalStrengthStaked = totalStrengthStaked.sub(metadata.strength);

            if (toBurn) {
                // Burn dead mushrooms
                MushroomNFT(lastStake.nftContract).burn(lastStake.nftIndex);
            } else {
                // If still alive, reduce lifespan of mushroom and return to user
                mushroomMetadata.setMushroomLifespan(lastStake.nftContract, lastStake.nftIndex, metadata.lifespan.sub(lifespanUsed), "");
                IERC721(lastStake.nftContract).transferFrom(address(this), msg.sender, lastStake.nftIndex);
            }

            totals.stakingShareSeconds = totals.stakingShareSeconds.sub(stakingShareSecondsToBurn);
            totals.stakingShares = totals.stakingShares.sub(lastStake.stakingShares);

            // 2. Global Accounting
            _totalStakingShareSeconds = _totalStakingShareSeconds.sub(stakingShareSecondsToBurn);
            totalStakingShares = totalStakingShares.sub(lastStake.stakingShares);

            accountStakes.pop();
            emit Unstaked(msg.sender, lastStake.nftContract, lastStake.nftIndex, totalStakedFor(msg.sender), "");
        }

        // Already set in updateAccounting
        // _lastAccountingTimestampSec = now;

        // interactions
        totalReward = rewardAmount;
        (userReward, devReward) = computeDevReward(totalReward);
        if (userReward > 0) {
            require(_unlockedPool.transfer(msg.sender, userReward), "EnokiGeyser: transfer to user out of unlocked pool failed");
        }

        if (devReward > 0) {
            require(_unlockedPool.transfer(devRewardAddress, devReward), "EnokiGeyser: transfer to dev out of unlocked pool failed");
        }

        emit TokensClaimed(msg.sender, rewardAmount);

        require(totalStakingShares == 0 || totalStaked() > 0, "EnokiGeyser: Error unstaking. Staking shares exist, but no staking tokens do");
    }

    /**
     * @dev Applies an additional time-bonus to a distribution amount. This is necessary to
     *      encourage long-term deposits instead of constant unstake/restakes.
     *      The bonus-multiplier is the result of a linear function that starts at startBonus and
     *      ends at 100% over bonusPeriodSec, then stays at 100% thereafter.
     * @param currentRewardTokens The current number of distribution tokens already alotted for this
     *                            unstake op. Any bonuses are already applied.
     * @param stakingShareSeconds The stakingShare-seconds that are being burned for new
     *                            distribution tokens.
     * @param stakeTimeSec Length of time for which the tokens were staked. Needed to calculate
     *                     the time-bonus.
     * @return Updated amount of distribution tokens to award, with any bonus included on the
     *         newly added tokens.
     */
    function computeNewReward(
        uint256 currentRewardTokens,
        uint256 stakingShareSeconds,
        uint256 stakeTimeSec
    ) private view returns (uint256) {
        uint256 newRewardTokens = totalUnlocked().mul(stakingShareSeconds).div(_totalStakingShareSeconds);

        if (stakeTimeSec >= bonusPeriodSec) {
            return currentRewardTokens.add(newRewardTokens);
        }

        uint256 oneHundredPct = 10**BONUS_DECIMALS;
        uint256 bonusedReward = startBonus.add(oneHundredPct.sub(startBonus).mul(stakeTimeSec).div(bonusPeriodSec)).mul(newRewardTokens).div(
            oneHundredPct
        );
        return currentRewardTokens.add(bonusedReward);
    }

    /**
     * @dev Determines split of specified reward amount between user and dev.
     * @param totalReward Amount of reward to split.
     * @return userReward Reward amounts for user and dev.
     * @return devReward Reward amounts for user and dev.
     */
    function computeDevReward(uint256 totalReward) public view returns (uint256 userReward, uint256 devReward) {
        if (devRewardPercentage == 0) {
            userReward = totalReward;
            devReward = 0;
        } else if (devRewardPercentage == MAX_PERCENTAGE) {
            userReward = 0;
            devReward = totalReward;
        } else {
            devReward = totalReward.mul(devRewardPercentage).div(MAX_PERCENTAGE);
            userReward = totalReward.sub(devReward); // Extra dust due to truncated rounding goes to user
        }
    }

    /**
     * @param addr The user to look up staking information for.
     * @return The number of staking tokens deposited for addr.
     */
    function totalStakedFor(address addr) public view returns (uint256) {
        return totalStakingShares > 0 ? totalStaked().mul(_userTotals[addr].stakingShares).div(totalStakingShares) : 0;
    }

    /**
     * @return The total number of deposit tokens staked globally, by all users.
     */
    function totalStaked() public view returns (uint256) {
        return totalStrengthStaked;
    }

    /**
     * @dev A globally callable function to update the accounting state of the system.
     *      Global state and state for the caller are updated.
     * @return [0] balance of the locked pool
     * @return [1] balance of the unlocked pool
     * @return [2] caller's staking share seconds
     * @return [3] global staking share seconds
     * @return [4] Rewards caller has accumulated, optimistically assumes max time-bonus.
     * @return [5] block timestamp
     */
    function updateAccounting()
        public
        returns (
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        unlockTokens();

        // Global accounting
        uint256 newStakingShareSeconds = now.sub(_lastAccountingTimestampSec).mul(totalStakingShares);
        _totalStakingShareSeconds = _totalStakingShareSeconds.add(newStakingShareSeconds);
        _lastAccountingTimestampSec = now;

        // User Accounting
        UserTotals storage totals = _userTotals[msg.sender];
        uint256 newUserStakingShareSeconds = now.sub(totals.lastAccountingTimestampSec).mul(totals.stakingShares);
        totals.stakingShareSeconds = totals.stakingShareSeconds.add(newUserStakingShareSeconds);
        totals.lastAccountingTimestampSec = now;

        uint256 totalUserRewards = (_totalStakingShareSeconds > 0)
            ? totalUnlocked().mul(totals.stakingShareSeconds).div(_totalStakingShareSeconds)
            : 0;

        return (totalLocked(), totalUnlocked(), totals.stakingShareSeconds, _totalStakingShareSeconds, totalUserRewards, now);
    }

    /**
     * @return Total number of locked distribution tokens.
     */
    function totalLocked() public view returns (uint256) {
        return _lockedPool.balance();
    }

    /**
     * @return Total number of unlocked distribution tokens.
     */
    function totalUnlocked() public view returns (uint256) {
        return _unlockedPool.balance();
    }

    /**
     * @return Number of unlock schedules.
     */
    function unlockScheduleCount() public view returns (uint256) {
        return unlockSchedules.length;
    }

    /**
     * @dev This funcion allows the contract owner to add more locked distribution tokens, along
     *      with the associated "unlock schedule". These locked tokens immediately begin unlocking
     *      linearly over the duraction of durationSec timeframe.
     * @param amount Number of distribution tokens to lock. These are transferred from the caller.
     * @param durationSec Length of time to linear unlock the tokens.
     */
    function lockTokens(uint256 amount, uint256 durationSec) external onlyOwner {
        require(unlockSchedules.length < _maxUnlockSchedules, "EnokiGeyser: reached maximum unlock schedules");

        // Update lockedTokens amount before using it in computations after.
        updateAccounting();

        uint256 lockedTokens = totalLocked();
        uint256 mintedLockedShares = (lockedTokens > 0) ? totalLockedShares.mul(amount).div(lockedTokens) : amount.mul(_initialSharesPerToken);

        UnlockSchedule memory schedule;
        schedule.initialLockedShares = mintedLockedShares;
        schedule.lastUnlockTimestampSec = now;
        schedule.endAtSec = now.add(durationSec);
        schedule.durationSec = durationSec;
        unlockSchedules.push(schedule);

        totalLockedShares = totalLockedShares.add(mintedLockedShares);

        require(_lockedPool.token().transferFrom(msg.sender, address(_lockedPool), amount), "EnokiGeyser: transfer into locked pool failed");
        emit TokensLocked(amount, durationSec, totalLocked());
    }

    /**
     * @dev Moves distribution tokens from the locked pool to the unlocked pool, according to the
     *      previously defined unlock schedules. Publicly callable.
     * @return Number of newly unlocked distribution tokens.
     */
    function unlockTokens() public returns (uint256) {
        uint256 unlockedTokens = 0;
        uint256 lockedTokens = totalLocked();

        if (totalLockedShares == 0) {
            unlockedTokens = lockedTokens;
        } else {
            uint256 unlockedShares = 0;
            for (uint256 s = 0; s < unlockSchedules.length; s++) {
                unlockedShares = unlockedShares.add(unlockScheduleShares(s));
            }
            unlockedTokens = unlockedShares.mul(lockedTokens).div(totalLockedShares);
            totalLockedShares = totalLockedShares.sub(unlockedShares);
        }

        if (unlockedTokens > 0) {
            require(_lockedPool.transfer(address(_unlockedPool), unlockedTokens), "EnokiGeyser: transfer out of locked pool failed");
            emit TokensUnlocked(unlockedTokens, totalLocked());
        }

        return unlockedTokens;
    }

    /**
     * @dev Returns the number of unlockable shares from a given schedule. The returned value
     *      depends on the time since the last unlock. This function updates schedule accounting,
     *      but does not actually transfer any tokens.
     * @param s Index of the unlock schedule.
     * @return The number of unlocked shares.
     */
    function unlockScheduleShares(uint256 s) private returns (uint256) {
        UnlockSchedule storage schedule = unlockSchedules[s];

        if (schedule.unlockedShares >= schedule.initialLockedShares) {
            return 0;
        }

        uint256 sharesToUnlock = 0;
        // Special case to handle any leftover dust from integer division
        if (now >= schedule.endAtSec) {
            sharesToUnlock = (schedule.initialLockedShares.sub(schedule.unlockedShares));
            schedule.lastUnlockTimestampSec = schedule.endAtSec;
        } else {
            sharesToUnlock = now.sub(schedule.lastUnlockTimestampSec).mul(schedule.initialLockedShares).div(schedule.durationSec);
            schedule.lastUnlockTimestampSec = now;
        }

        schedule.unlockedShares = schedule.unlockedShares.add(sharesToUnlock);
        return sharesToUnlock;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

pragma solidity ^0.6.0;

import "../GSN/Context.sol";
import "../Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract OwnableUpgradeSafe is Initializable, ContextUpgradeSafe {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */

    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal initializer {


        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);

    }


    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }

    uint256[49] private __gap;
}

pragma solidity ^0.6.0;
import "../Initializable.sol";

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract ContextUpgradeSafe is Initializable {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.

    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {


    }


    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }

    uint256[50] private __gap;
}

pragma solidity >=0.4.24 <0.7.0;


/**
 * @title Initializable
 *
 * @dev Helper contract to support initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 */
contract Initializable {

  /**
   * @dev Indicates that the contract has been initialized.
   */
  bool private initialized;

  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;

  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");

    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      initialized = true;
    }

    _;

    if (isTopLevelCall) {
      initializing = false;
    }
  }

  /// @dev Returns true if and only if the function is running in the constructor
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    address self = address(this);
    uint256 cs;
    assembly { cs := extcodesize(self) }
    return cs == 0;
  }

  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

/**
 * @title A simple holder of tokens.
 * This is a simple contract to hold tokens. It's useful in the case where a separate contract
 * needs to hold multiple distinct pools of the same token.
 */
contract TokenPool is Ownable {
    IERC20 public token;

    constructor(IERC20 _token) public {
        token = _token;
    }

    function balance() public view returns (uint256) {
        return token.balanceOf(address(this));
    }

    function transfer(address to, uint256 value) external onlyOwner returns (bool) {
        return token.transfer(to, value);
    }

    function rescueFunds(address tokenToRescue, address to, uint256 amount) external onlyOwner returns (bool) {
        require(address(token) != tokenToRescue, 'TokenPool: Cannot claim token held by the contract');

        return IERC20(tokenToRescue).transfer(to, amount);
    }
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "./MushroomLib.sol";

/*
    Minting and burning permissions are managed by the Owner
*/
contract MushroomNFT is ERC721("Mushroom", "Mushroom"), Ownable {
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;

    mapping (uint256 => MushroomLib.MushroomData) public mushroomData; // NFT Id -> Metadata
    mapping (uint256 => MushroomLib.MushroomType) public mushroomTypes; // Species Id -> Metadata
    mapping (uint256 => bool) public mushroomTypeExists; // Species Id -> Exists

    /* ========== VIEWS ========== */

    // Mushrooms inherit their strength from their species
    function getMushroomData(uint256 tokenId) public view returns (MushroomLib.MushroomData memory) {
        MushroomLib.MushroomData memory data = mushroomData[tokenId];
        return data;
    }

    function getSpecies(uint256 speciesId) public view returns (MushroomLib.MushroomType memory) {
        return mushroomTypes[speciesId];
    }

    function getRemainingMintableForSpecies(uint256 speciesId) public view returns (uint256) {
        MushroomLib.MushroomType storage species = mushroomTypes[speciesId];
        return species.cap.sub(species.minted);
    }
    
    // TODO: Allowed approved contracts to set lifespan
    function setMushroomLifespan(uint256 index, uint256 lifespan) public onlyOwner {
        MushroomLib.MushroomData storage data = mushroomData[index];
        data.lifespan = lifespan;
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    /**
     * @dev Burns `tokenId`. See {ERC721-_burn}. Also clears mushroom data for this token.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
        _burn(tokenId);
        _clearMushroomData(tokenId);
    }

    // TODO: Approved Minters only
    function mint(address recipient, uint256 tokenId, uint256 speciesId, uint256 lifespan) public {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
        _mintWithMetadata(recipient, tokenId, speciesId, lifespan);
    }

    function _mintWithMetadata(address recipient, uint256 tokenId, uint256 speciesId, uint256 lifespan) internal {
        require(mushroomTypeExists[speciesId], "MushroomNFT: mushroom species specified does not exist");
        MushroomLib.MushroomType storage species = mushroomTypes[speciesId];

        require(species.minted < species.cap, "MushroomNFT: minting cap reached for species");

        species.minted = species.minted.add(1);
        mushroomData[tokenId] = MushroomLib.MushroomData(speciesId, species.strength, lifespan);

        _mint(recipient, tokenId);
    }

    // TODO: We don't really have to do this as a newly minted mushroom will set the data
    function _clearMushroomData(uint256 tokenId) internal {
        MushroomLib.MushroomData storage data = mushroomData[tokenId];
        MushroomLib.MushroomType storage species = mushroomTypes[data.species];     

        species.minted = species.minted.sub(1);
    }
    function setMushroomType(uint256 speciesId, MushroomLib.MushroomType memory mType) public onlyOwner {
        if (!mushroomTypeExists[speciesId]) {
            mushroomTypeExists[speciesId] = true;
        }

        mushroomTypes[speciesId] = mType;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../../GSN/Context.sol";
import "./IERC721.sol";
import "./IERC721Metadata.sol";
import "./IERC721Enumerable.sol";
import "./IERC721Receiver.sol";
import "../../introspection/ERC165.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
import "../../utils/EnumerableSet.sol";
import "../../utils/EnumerableMap.sol";
import "../../utils/Strings.sol";

/**
 * @title ERC721 Non-Fungible Token Standard basic implementation
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
    using SafeMath for uint256;
    using Address for address;
    using EnumerableSet for EnumerableSet.UintSet;
    using EnumerableMap for EnumerableMap.UintToAddressMap;
    using Strings for uint256;

    // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
    bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;

    // Mapping from holder address to their (enumerable) set of owned tokens
    mapping (address => EnumerableSet.UintSet) private _holderTokens;

    // Enumerable mapping from token ids to their owners
    EnumerableMap.UintToAddressMap private _tokenOwners;

    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Optional mapping for token URIs
    mapping (uint256 => string) private _tokenURIs;

    // Base URI
    string private _baseURI;

    /*
     *     bytes4(keccak256('balanceOf(address)')) == 0x70a08231
     *     bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
     *     bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
     *     bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
     *     bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
     *     bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
     *     bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
     *
     *     => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
     *        0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
     */
    bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;

    /*
     *     bytes4(keccak256('name()')) == 0x06fdde03
     *     bytes4(keccak256('symbol()')) == 0x95d89b41
     *     bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
     *
     *     => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
     */
    bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;

    /*
     *     bytes4(keccak256('totalSupply()')) == 0x18160ddd
     *     bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
     *     bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
     *
     *     => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
     */
    bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;

        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721);
        _registerInterface(_INTERFACE_ID_ERC721_METADATA);
        _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");

        return _holderTokens[owner].length();
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view override returns (address) {
        return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory _tokenURI = _tokenURIs[tokenId];

        // If there is no base URI, return the token URI.
        if (bytes(_baseURI).length == 0) {
            return _tokenURI;
        }
        // If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
        if (bytes(_tokenURI).length > 0) {
            return string(abi.encodePacked(_baseURI, _tokenURI));
        }
        // If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
        return string(abi.encodePacked(_baseURI, tokenId.toString()));
    }

    /**
    * @dev Returns the base URI set via {_setBaseURI}. This will be
    * automatically added as a prefix in {tokenURI} to each token's URI, or
    * to the token ID if no specific URI is set for that token ID.
    */
    function baseURI() public view returns (string memory) {
        return _baseURI;
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
        return _holderTokens[owner].at(index);
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        // _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
        return _tokenOwners.length();
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view override returns (uint256) {
        (uint256 tokenId, ) = _tokenOwners.at(index);
        return tokenId;
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        return _tokenOwners.contains(tokenId);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     d*
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
        _mint(to, tokenId);
        require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _holderTokens[to].add(tokenId);

        _tokenOwners.set(tokenId, to);

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        // Clear metadata (if any)
        if (bytes(_tokenURIs[tokenId]).length != 0) {
            delete _tokenURIs[tokenId];
        }

        _holderTokens[owner].remove(tokenId);

        _tokenOwners.remove(tokenId);

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _holderTokens[from].remove(tokenId);
        _holderTokens[to].add(tokenId);

        _tokenOwners.set(tokenId, to);

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
        require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
        _tokenURIs[tokenId] = _tokenURI;
    }

    /**
     * @dev Internal function to set the base URI for all token IDs. It is
     * automatically added as a prefix to the value returned in {tokenURI},
     * or to the token ID if {tokenURI} is empty.
     */
    function _setBaseURI(string memory baseURI_) internal virtual {
        _baseURI = baseURI_;
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        private returns (bool)
    {
        if (!to.isContract()) {
            return true;
        }
        bytes memory returndata = to.functionCall(abi.encodeWithSelector(
            IERC721Receiver(to).onERC721Received.selector,
            _msgSender(),
            from,
            tokenId,
            _data
        ), "ERC721: transfer to non ERC721Receiver implementer");
        bytes4 retval = abi.decode(returndata, (bytes4));
        return (retval == _ERC721_RECEIVED);
    }

    function _approve(address to, uint256 tokenId) private {
        _tokenApprovals[tokenId] = to;
        emit Approval(ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

import "../../introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
      * @dev Safely transfers `tokenId` token from `from` to `to`.
      *
      * Requirements:
      *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
      * - `tokenId` token must exist and be owned by `from`.
      * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
      * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
      *
      * Emits a {Transfer} event.
      */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {

    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data)
    external returns (bytes4);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts may inherit from this and call {_registerInterface} to declare
 * their support of an interface.
 */
contract ERC165 is IERC165 {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Mapping of interface ids to whether or not it's supported.
     */
    mapping(bytes4 => bool) private _supportedInterfaces;

    constructor () internal {
        // Derived contracts need only register support for their own interfaces,
        // we register support for ERC165 itself here
        _registerInterface(_INTERFACE_ID_ERC165);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     *
     * Time complexity O(1), guaranteed to always use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Registers the contract as an implementer of the interface defined by
     * `interfaceId`. Support of the actual ERC165 interface is automatic and
     * registering its interface id is not required.
     *
     * See {IERC165-supportsInterface}.
     *
     * Requirements:
     *
     * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
     */
    function _registerInterface(bytes4 interfaceId) internal virtual {
        require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
 * (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Library for managing an enumerable variant of Solidity's
 * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
 * type.
 *
 * Maps have the following properties:
 *
 * - Entries are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Entries are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableMap for EnumerableMap.UintToAddressMap;
 *
 *     // Declare a set state variable
 *     EnumerableMap.UintToAddressMap private myMap;
 * }
 * ```
 *
 * As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
 * supported.
 */
library EnumerableMap {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Map type with
    // bytes32 keys and values.
    // The Map implementation uses private functions, and user-facing
    // implementations (such as Uint256ToAddressMap) are just wrappers around
    // the underlying Map.
    // This means that we can only create new EnumerableMaps for types that fit
    // in bytes32.

    struct MapEntry {
        bytes32 _key;
        bytes32 _value;
    }

    struct Map {
        // Storage of map keys and values
        MapEntry[] _entries;

        // Position of the entry defined by a key in the `entries` array, plus 1
        // because index 0 means a key is not in the map.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
        // We read and store the key's index to prevent multiple reads from the same storage slot
        uint256 keyIndex = map._indexes[key];

        if (keyIndex == 0) { // Equivalent to !contains(map, key)
            map._entries.push(MapEntry({ _key: key, _value: value }));
            // The entry is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            map._indexes[key] = map._entries.length;
            return true;
        } else {
            map._entries[keyIndex - 1]._value = value;
            return false;
        }
    }

    /**
     * @dev Removes a key-value pair from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function _remove(Map storage map, bytes32 key) private returns (bool) {
        // We read and store the key's index to prevent multiple reads from the same storage slot
        uint256 keyIndex = map._indexes[key];

        if (keyIndex != 0) { // Equivalent to contains(map, key)
            // To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
            // in the array, and then remove the last entry (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = keyIndex - 1;
            uint256 lastIndex = map._entries.length - 1;

            // When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            MapEntry storage lastEntry = map._entries[lastIndex];

            // Move the last entry to the index where the entry to delete is
            map._entries[toDeleteIndex] = lastEntry;
            // Update the index for the moved entry
            map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved entry was stored
            map._entries.pop();

            // Delete the index for the deleted slot
            delete map._indexes[key];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function _contains(Map storage map, bytes32 key) private view returns (bool) {
        return map._indexes[key] != 0;
    }

    /**
     * @dev Returns the number of key-value pairs in the map. O(1).
     */
    function _length(Map storage map) private view returns (uint256) {
        return map._entries.length;
    }

   /**
    * @dev Returns the key-value pair stored at position `index` in the map. O(1).
    *
    * Note that there are no guarantees on the ordering of entries inside the
    * array, and it may change when more entries are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
        require(map._entries.length > index, "EnumerableMap: index out of bounds");

        MapEntry storage entry = map._entries[index];
        return (entry._key, entry._value);
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function _get(Map storage map, bytes32 key) private view returns (bytes32) {
        return _get(map, key, "EnumerableMap: nonexistent key");
    }

    /**
     * @dev Same as {_get}, with a custom error message when `key` is not in the map.
     */
    function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
        uint256 keyIndex = map._indexes[key];
        require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
        return map._entries[keyIndex - 1]._value; // All indexes are 1-based
    }

    // UintToAddressMap

    struct UintToAddressMap {
        Map _inner;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
        return _set(map._inner, bytes32(key), bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
        return _remove(map._inner, bytes32(key));
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
        return _contains(map._inner, bytes32(key));
    }

    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(UintToAddressMap storage map) internal view returns (uint256) {
        return _length(map._inner);
    }

   /**
    * @dev Returns the element stored at position `index` in the set. O(1).
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
        (bytes32 key, bytes32 value) = _at(map._inner, index);
        return (uint256(key), address(uint256(value)));
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
        return address(uint256(_get(map._inner, bytes32(key))));
    }

    /**
     * @dev Same as {get}, with a custom error message when `key` is not in the map.
     */
    function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
        return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev String operations.
 */
library Strings {
    /**
     * @dev Converts a `uint256` to its ASCII `string` representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        uint256 index = digits - 1;
        temp = value;
        while (temp != 0) {
            buffer[index--] = byte(uint8(48 + temp % 10));
            temp /= 10;
        }
        return string(buffer);
    }
}

pragma solidity ^0.6.0;

library MushroomLib {
    struct MushroomData {
        uint256 species;
        uint256 strength;
        uint256 lifespan;
    }

    struct MushroomType {
        uint256 id;
        uint256 strength;
        uint256 minLifespan;
        uint256 maxLifespan;
        uint256 minted;
        uint256 cap;
    }
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./resolvers/MetadataResolver.sol";
import "../MushroomLib.sol";

contract MushroomMetadata is Ownable {
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;

    mapping(address => address) public metadataResolvers;

    event ResolverSet(address nft, address resolver);

    modifier onlyWithMetadataResolver(address nftContract) {
        require(metadataResolvers[nftContract] != address(0), "MetadataRegistry: No resolver set for nft");
        _;
    }

    function hasMetadataResolver(address nftContract) external view returns (bool) {
        return metadataResolvers[nftContract] != address(0);
    }

    function getMushroomData(
        address nftContract,
        uint256 nftIndex,
        bytes calldata data
    ) external view onlyWithMetadataResolver(nftContract) returns (MushroomLib.MushroomData memory) {
        MetadataResolver resolver = MetadataResolver(metadataResolvers[nftContract]);
        MushroomLib.MushroomData memory mushroomData = resolver.getMushroomData(nftIndex, data);
        return mushroomData;
    }

    function setMushroomLifespan(
        address nftContract,
        uint256 nftIndex,
        uint256 lifespan,
        bytes calldata data
    ) external onlyWithMetadataResolver(nftContract) {
        MetadataResolver resolver = MetadataResolver(metadataResolvers[nftContract]);
        resolver.setMushroomLifespan(nftIndex, lifespan, data);
    }

    function setResolver(address nftContract, address resolver) public onlyOwner {
        metadataResolvers[nftContract] = resolver;

        emit ResolverSet(nftContract, resolver);
    }
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "../../MushroomLib.sol";

abstract contract MetadataResolver {
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;

    function getMushroomData(uint256 index, bytes calldata data) external virtual view returns (MushroomLib.MushroomData memory);
    function setMushroomLifespan(uint256 index, uint256 lifespan, bytes calldata data) external virtual;
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title EthVesting
 * @dev A eth holder contract that can release its eth balance gradually like a
 * typical vesting scheme, with a cliff and vesting period.
 */
contract EthVesting {
    // The vesting schedule is time-based (i.e. using block timestamps as opposed to e.g. block numbers), and is
    // therefore sensitive to timestamp manipulation (which is something miners can do, to a certain degree). Therefore,
    // it is recommended to avoid using short time durations (less than a minute). Typical vesting schemes, with a
    // cliff period of a year and a duration of four years, are safe to use.
    // solhint-disable not-rely-on-time

    using SafeMath for uint256;

    event EthReleased(uint256 amount);
    event EthReleasedBackup(uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    // beneficiary of tokens after they are released
    address payable private _beneficiary;
    address payable private _backupBeneficiary;

    // Durations and timestamps are expressed in UNIX time, the same units as block.timestamp.
    uint256 private _cliff;
    uint256 private _start;
    uint256 private _duration;
    uint256 private _backupReleaseGracePeriod;

    uint256 private _released;

    /**
     * @dev Creates a vesting contract that vests its balance of any ERC20 token to the
     * beneficiary, gradually in a linear fashion until start + duration. By then all
     * of the balance will have vested.
     * @param beneficiary address of the beneficiary to whom vested tokens are transferred
     * @param cliffDuration duration in seconds of the cliff in which tokens will begin to vest
     * @param start the time (as Unix time) at which point vesting starts
     * @param duration duration in seconds of the period in which the tokens will vest
     * @param backupReleaseGracePeriod the period after the duration in completed before the backup beneficiary can withdraw
     */
    constructor (address payable beneficiary, address payable backupBeneficiary, uint256 start, uint256 cliffDuration, uint256 duration, uint256 backupReleaseGracePeriod) public {
        require(beneficiary != address(0), "EthVesting: beneficiary is the zero address");
        // solhint-disable-next-line max-line-length
        require(cliffDuration <= duration, "EthVesting: cliff is longer than duration");
        require(duration > 0, "EthVesting: duration is 0");
        // solhint-disable-next-line max-line-length
        require(start.add(duration) > block.timestamp, "EthVesting: final time is before current time");

        _beneficiary = beneficiary;
        _backupBeneficiary = backupBeneficiary;
        _duration = duration;
        _cliff = start.add(cliffDuration);
        _start = start;
        _backupReleaseGracePeriod = backupReleaseGracePeriod;
    }

    /**
     * @return the beneficiary of the ether.
     */
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /**
     * @return the backup beneficiary of the ether.
     */
    function backupBeneficiary() public view returns (address) {
        return _backupBeneficiary;
    }

    /**
     * @return the period after the duration in completed before the backup beneficiary can withdraw.
     */
    function backupReleaseGracePeriod() public view returns (uint256) {
        return _backupReleaseGracePeriod;
    }

    /**
     * @return the cliff time of the eth vesting.
     */
    function cliff() public view returns (uint256) {
        return _cliff;
    }

    /**
     * @return the start time of the eth vesting.
     */
    function start() public view returns (uint256) {
        return _start;
    }

    /**
     * @return the duration of the eth vesting.
     */
    function duration() public view returns (uint256) {
        return _duration;
    }

    /**
     * @return the amount of the token released.
     */
    function released() public view returns (uint256) {
        return _released;
    }

    /**
     * @notice Transfers vested tokens to beneficiary.
     */
    function release() public {
        uint256 unreleased = _releasableAmount();

        require(unreleased > 0, "EthVesting: no eth is due");

        _released = _released.add(unreleased);

        _beneficiary.transfer(unreleased);

        emit EthReleased(unreleased);
    }

    /**
     * @dev Calculates the amount that has already vested but hasn't been released yet.
     */
    function _releasableAmount() private view returns (uint256) {
        return _vestedAmount().sub(_released);
    }

    /**
     * @dev Calculates the amount that has already vested.
     */
    function _vestedAmount() private view returns (uint256) {
        uint256 currentBalance = address(this).balance;
        uint256 totalBalance = currentBalance.add(_released);

        if (block.timestamp < _cliff) {
            return 0;
        } else if (block.timestamp >= _start.add(_duration)) {
            return totalBalance;
        } else {
            return totalBalance.mul(block.timestamp.sub(_start)).div(_duration);
        }
    }

    /**
     * @dev After the vesting period is complete, allows for withdrawal by backup beneficiary if funds are unclaimed after the post-duration grace period
     */
    function backupRelease() public {
        require(block.timestamp >= _start.add(_duration).add(_backupReleaseGracePeriod));
        _backupBeneficiary.transfer(address(this).balance);

        emit EthReleasedBackup(address(this).balance);
    }

    // Allow Recieve Ether
    receive () external payable virtual {
        emit PaymentReceived(msg.sender, msg.value);
    }
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

import "./EnokiGeyser.sol";

contract GeyserEscrow is Ownable{
    EnokiGeyser public geyser;

    constructor(EnokiGeyser geyser_) public {
        geyser = geyser_;
    }

    function lockTokens(
        uint256 amount,
        uint256 durationSec
    ) external onlyOwner {
        IERC20 distributionToken = geyser.getDistributionToken();
        distributionToken.approve(address(geyser), amount);

        geyser.lockTokens(amount, durationSec);
    }
}

pragma solidity ^0.6.0;

interface IMission  {
    function sendSpores(address recipient, uint256 amount) external;
    function approvePool(address pool) external;
    function revokePool(address pool) external;
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

interface IMushroomFactory  {
    function costPerMushroom() external returns (uint256);
    function growMushrooms(address recipient, uint256 numMushrooms) external;
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "../MushroomLib.sol";

abstract contract IMushroomMetadata {
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;

    function hasMetadataResolver(address nftContract) external virtual view returns (bool);

    function getMushroomData(
        address nftContract,
        uint256 nftIndex,
        bytes calldata data
    ) external virtual view returns (MushroomLib.MushroomData memory);

    function setMushroomLifespan(
        address nftContract,
        uint256 nftIndex,
        uint256 lifespan,
        bytes calldata data
    ) external virtual;

    function setResolver(address nftContract, address resolver) public virtual;
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts-ethereum-package/contracts/access/Ownable.sol";

import "../../MushroomNFT.sol";
import "../../MushroomLib.sol";
import "./MetadataResolver.sol";


/*
    Reads mushroom NFT metadata directly from the Mushroom NFT contract
*/ 
contract MushroomResolver is Initializable, OwnableUpgradeSafe, MetadataResolver {
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;

    MushroomNFT public mushroomNft;

    function initialize(address mushroomNft_) public initializer {
        __Ownable_init();
        mushroomNft = MushroomNFT(mushroomNft_);
    }

    function getMushroomData(uint256 index, bytes calldata data) external view override returns (MushroomLib.MushroomData memory) {
        MushroomLib.MushroomData memory mData = mushroomNft.getMushroomData(index);
        return mData;
    }
    function setMushroomLifespan(uint256 index, uint256 lifespan, bytes calldata data) external override {
        mushroomNft.setMushroomLifespan(index, lifespan);
    }
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts-ethereum-package/contracts/access/Ownable.sol";
import "@openzeppelin/contracts-ethereum-package/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/*
    A pool of spores that can be takens by Spore pools according to their spore rate
*/
contract Mission is Initializable, OwnableUpgradeSafe {

    IERC20 public sporeToken;
    mapping (address => bool) public approved;

    event SporesHarvested(address pool, uint256 amount);

    modifier onlyApprovedPool() {
        require(approved[msg.sender], "Mission: Only approved pools");
        _;
    }
    function initialize(IERC20 sporeToken_) public initializer {
        __Ownable_init();
        sporeToken = sporeToken_;
    }

    function sendSpores(address recipient, uint256 amount) public onlyApprovedPool {
        sporeToken.transfer(recipient, amount);
        emit SporesHarvested(msg.sender, amount);
    }

    function approvePool(address pool) public onlyOwner {
        approved[pool] = true;
    }

    function revokePool(address pool) public onlyOwner {
        approved[pool] = false;
    }
}

pragma solidity ^0.6.0;

import "../utils/EnumerableSet.sol";
import "../utils/Address.sol";
import "../GSN/Context.sol";
import "../Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, _msgSender()));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 */
abstract contract AccessControlUpgradeSafe is Initializable, ContextUpgradeSafe {
    function __AccessControl_init() internal initializer {
        __Context_init_unchained();
        __AccessControl_init_unchained();
    }

    function __AccessControl_init_unchained() internal initializer {


    }

    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }

    uint256[49] private __gap;
}

pragma solidity ^0.6.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
 * (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts-ethereum-package/contracts/access/Ownable.sol";

import "./MushroomNFT.sol";
import "./MushroomLib.sol";
import "./metadata/MushroomMetadata.sol";

contract MushroomFactory is Initializable, OwnableUpgradeSafe {
    using MushroomLib for MushroomLib.MushroomData;
    using MushroomLib for MushroomLib.MushroomType;
    using SafeMath for uint256;

    IERC20 public sporeToken;
    MushroomNFT public mushroomNft;
    MushroomMetadata public mushroomMetadata;

    uint256 public costPerMushroom;
    uint256 public mySpecies;

    function initialize(IERC20 sporeToken_, MushroomNFT mushroomNft_, uint256 costPerMushroom_) public initializer {
        __Ownable_init();
        sporeToken=sporeToken_;
        mushroomNft=mushroomNft_;
        costPerMushroom=costPerMushroom_;
    }

    function _generateMushroomLifespan(uint256 minLifespan, uint256 maxLifespan) internal returns (uint256) {
        uint256 range = maxLifespan.sub(minLifespan);
        uint256 fromMin = uint256(keccak256(abi.encodePacked(block.timestamp))) % range;
        return minLifespan.add(fromMin);
    }

    // Each mushroom costs 1/10th of the spore rate in spores.
    function growMushrooms(address recipient, uint256 numMushrooms) public onlyOwner {
        MushroomLib.MushroomType memory species = mushroomNft.getSpecies(mySpecies);
        for (uint256 i = 0; i < numMushrooms; i++) {
            uint256 nextId = mushroomNft.totalSupply().add(1);
            mushroomNft.mint(recipient, nextId, mySpecies, _generateMushroomLifespan(species.minLifespan, species.maxLifespan));
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/GSN/Context.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title PaymentSplitter
 * @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
 * that the Ether will be split in this way, since it is handled transparently by the contract.
 *
 * The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
 * account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
 * an amount proportional to the percentage of total shares they were assigned.
 *
 * `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
 * accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
 * function.
 */
contract PaymentSplitter is Context {
    using SafeMath for uint256;

    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;

    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;

    /**
     * @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
     * the matching position in the `shares` array.
     *
     * All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
     * duplicates in `payees`.
     */
    constructor (address[] memory payees, uint256[] memory shares) public payable {
        // solhint-disable-next-line max-line-length
        require(payees.length == shares.length, "PaymentSplitter: payees and shares length mismatch");
        require(payees.length > 0, "PaymentSplitter: no payees");

        for (uint256 i = 0; i < payees.length; i++) {
            _addPayee(payees[i], shares[i]);
        }
    }

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     */
    receive () external payable virtual {
        emit PaymentReceived(_msgSender(), msg.value);
    }

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() public view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() public view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) public view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) public view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) public view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
     * total shares and their previous withdrawals.
     */
    function release(address payable account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 totalReceived = address(this).balance.add(_totalReleased);
        uint256 payment = totalReceived.mul(_shares[account]).div(_totalShares).sub(_released[account]);

        require(payment != 0, "PaymentSplitter: account is not due payment");

        _released[account] = _released[account].add(payment);
        _totalReleased = _totalReleased.add(payment);

        account.transfer(payment);
        emit PaymentReleased(account, payment);
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares owned by the payee.
     */
    function _addPayee(address account, uint256 shares_) private {
        require(account != address(0), "PaymentSplitter: account is the zero address");
        require(shares_ > 0, "PaymentSplitter: shares are 0");
        require(_shares[account] == 0, "PaymentSplitter: account already has shares");

        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares.add(shares_);
        emit PayeeAdded(account, shares_);
    }
}

pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;

/* 
    Releases spores at the given rate until exhausted
    is doubled or halved every 3,240 blocks (7 days at 20s a block) based on staked $ENOKI
*/
import "@openzeppelin/contracts/math/Math.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

import "./Defensible.sol";
import "./interfaces/IMushroomFactory.sol";
import "./interfaces/IMission.sol";
import "./SporeToken.sol";
import "./ApprovedContractList.sol";

contract SporePool is Ownable, ReentrancyGuard, Pausable, Defensible {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    /* ========== STATE VARIABLES ========== */

    SporeToken public rewardsToken;
    IERC20 public stakingToken;
    uint256 public periodFinish = 0;
    uint256 public rewardRate = 0;
    uint256 public rewardsDuration = 7 days;
    uint256 public lastUpdateTime;
    uint256 public rewardPerTokenStored;

    uint256 public constant MAX_PERCENTAGE = 100;
    uint256 public devRewardPercentage;
    address public devRewardAddress;

    mapping(address => uint256) public userRewardPerTokenPaid;
    mapping(address => uint256) public rewards;

    uint256 private _totalSupply;
    mapping(address => uint256) private _balances;

    IMushroomFactory public mushroomFactory;
    IMission public mission;
    ApprovedContractList public approvedContractList;

    /* ========== CONSTRUCTOR ========== */

    constructor(
        address _owner,
        address _rewardsToken,
        address _stakingToken,
        address _mushroomFactory,
        address _mission,
        address _approvedContractList,
        uint256 _devRewardPercentage,
        address _devRewardAddress
    ) public {
        rewardsToken = SporeToken(_rewardsToken);
        stakingToken = IERC20(_stakingToken);
        mushroomFactory = IMushroomFactory(_mushroomFactory);
        mission = IMission(_mission);
        approvedContractList = ApprovedContractList(_approvedContractList);

        devRewardPercentage = _devRewardPercentage;
        devRewardAddress = _devRewardAddress;
    }

    /* ========== VIEWS ========== */

    function totalSupply() external view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) external view returns (uint256) {
        return _balances[account];
    }

    function lastTimeRewardApplicable() public view returns (uint256) {
        return Math.min(block.timestamp, periodFinish);
    }

    function rewardPerToken() public view returns (uint256) {
        if (_totalSupply == 0) {
            return rewardPerTokenStored;
        }
        return rewardPerTokenStored.add(lastTimeRewardApplicable().sub(lastUpdateTime).mul(rewardRate).mul(1e18).div(_totalSupply));
    }

    function earned(address account) public view returns (uint256) {
        return _balances[account].mul(rewardPerToken().sub(userRewardPerTokenPaid[account])).div(1e18).add(rewards[account]);
    }

    function getRewardForDuration() external view returns (uint256) {
        return rewardRate.mul(rewardsDuration);
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    function stake(uint256 amount) external nonReentrant defend(approvedContractList) whenNotPaused updateReward(msg.sender) {
        require(amount > 0, "Cannot stake 0");
        _totalSupply = _totalSupply.add(amount);
        _balances[msg.sender] = _balances[msg.sender].add(amount);
        stakingToken.safeTransferFrom(msg.sender, address(this), amount);
        emit Staked(msg.sender, amount);
    }

    function withdraw(uint256 amount) public nonReentrant updateReward(msg.sender) {
        require(amount > 0, "Cannot withdraw 0");
        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);
        stakingToken.safeTransfer(msg.sender, amount);
        emit Withdrawn(msg.sender, amount);
    }

    function harvest(uint256 mushroomsToGrow) public nonReentrant updateReward(msg.sender) {
        uint256 reward = rewards[msg.sender];

        if (reward > 0) {
            uint256 remainingReward = reward;
            rewards[msg.sender] = 0;

            // Burn some rewards for mushrooms if desired
            if (mushroomsToGrow > 0) {
                uint256 totalCost = mushroomFactory.costPerMushroom().mul(mushroomsToGrow);
                require(reward >= totalCost, "Not enough rewards to grow the number of mushrooms specified");

                uint256 toDev = totalCost.mul(devRewardPercentage).div(MAX_PERCENTAGE);
                rewardsToken.burn(totalCost.sub(toDev));

                if (toDev > 0) {
                    mission.sendSpores(devRewardAddress, toDev);
                }

                remainingReward = reward.sub(totalCost);
                mushroomFactory.growMushrooms(msg.sender, mushroomsToGrow);
            }

            if (remainingReward > 0) {
                // TODO: Add safe ERC20 features to spore token
                // rewardsToken.safeTransfer(msg.sender, remainingReward);

                mission.sendSpores(msg.sender, remainingReward);
                emit RewardPaid(msg.sender, remainingReward);
            }
        }
    }

    function exit() external {
        withdraw(_balances[msg.sender]);
        harvest(0);
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    function notifyRewardAmount(uint256 reward) external onlyOwner updateReward(address(0)) {
        if (block.timestamp >= periodFinish) {
            rewardRate = reward.div(rewardsDuration);
        } else {
            uint256 remaining = periodFinish.sub(block.timestamp);
            uint256 leftover = remaining.mul(rewardRate);
            rewardRate = reward.add(leftover).div(rewardsDuration);
        }

        // Ensure the provided reward amount is not more than the balance in the contract.
        // This keeps the reward rate in the right range, preventing overflows due to
        // very high values of rewardRate in the earned and rewardsPerToken functions;
        // Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
        uint256 balance = rewardsToken.balanceOf(address(this));
        require(rewardRate <= balance.div(rewardsDuration), "Provided reward too high");

        lastUpdateTime = block.timestamp;
        periodFinish = block.timestamp.add(rewardsDuration);
        emit RewardAdded(reward);
    }

    // Added to support recovering LP Rewards from other systems such as BAL to be distributed to holders
    function recoverERC20(address tokenAddress, uint256 tokenAmount) external onlyOwner {
        // Cannot recover the staking token or the rewards token
        require(tokenAddress != address(stakingToken) && tokenAddress != address(rewardsToken), "Cannot withdraw the staking or rewards tokens");

        //TODO: Add safeTransfer
        IERC20(tokenAddress).transfer(owner(), tokenAmount);
        emit Recovered(tokenAddress, tokenAmount);
    }

    function setRewardsDuration(uint256 _rewardsDuration) external onlyOwner {
        require(block.timestamp > periodFinish, "Previous rewards period must be complete before changing the duration for the new period");
        rewardsDuration = _rewardsDuration;
        emit RewardsDurationUpdated(rewardsDuration);
    }

    /* ========== MODIFIERS ========== */

    modifier updateReward(address account) {
        rewardPerTokenStored = rewardPerToken();
        lastUpdateTime = lastTimeRewardApplicable();
        if (account != address(0)) {
            rewards[account] = earned(account);
            userRewardPerTokenPaid[account] = rewardPerTokenStored;
        }
        _;
    }

    /* ========== EVENTS ========== */

    event RewardAdded(uint256 reward);
    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
    event RewardPaid(address indexed user, uint256 reward);
    event RewardsDurationUpdated(uint256 newDuration);
    event Recovered(address token, uint256 amount);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../GSN/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/Math.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./SporeToken.sol";

contract SporePresale is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    mapping(address => bool) public whitelist;
    mapping(address => uint256) public ethSupply;
    uint256 public whitelistCount;
    address payable devAddress;
    uint256 public sporePrice = 25;
    uint256 public buyLimit = 3 * 1e18;
    bool public presaleStart = false;
    bool public onlyWhitelist = true;
    uint256 public presaleLastSupply = 15000 * 1e18;

    SporeToken public spore;

    event BuySporeSuccess(address account, uint256 ethAmount, uint256 sporeAmount);

    constructor(address payable devAddress_, SporeToken sporeToken_) public {
        devAddress = devAddress_;
        spore = sporeToken_;
    }

    function addToWhitelist(address[] memory accounts) public onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            address account = accounts[i];

            require(whitelist[account] == false, "This account is already in whitelist.");
            whitelist[account] = true;
            whitelistCount = whitelistCount + 1;
        }
    }

    function removeFromWhitelist(address[] memory accounts) public onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            address account = accounts[i];

            require(whitelist[account], "This account is not in whitelist.");
            whitelist[account] = false;
            whitelistCount = whitelistCount - 1;
        }
    }

    function getDevAddress() public view returns (address) {
        return address(devAddress);
    }
    function setDevAddress(address payable account) public onlyOwner {
        devAddress = account;
    }

    function startPresale() public onlyOwner {
        presaleStart = true;
    }

    function stopPresale() public onlyOwner {
        presaleStart = false;
    }

    function setSporePrice(uint256 newPrice) public onlyOwner {
        sporePrice = newPrice;
    }

    function setBuyLimit(uint256 newLimit) public onlyOwner {
        buyLimit = newLimit;
    }

    function changeToNotOnlyWhitelist() public onlyOwner {
        onlyWhitelist = false;
    }

    modifier needHaveLastSupply() {
        require(presaleLastSupply >= 0, "Oh you are so late.");
        _;
    }

    modifier presaleHasStarted() {
        require(presaleStart, "Presale has not been started.");
        _;
    }

    receive() external payable presaleHasStarted needHaveLastSupply {
        if (onlyWhitelist) {
            require(whitelist[msg.sender], "This time is only for people who are in whitelist.");
        }
        uint256 ethTotalAmount = ethSupply[msg.sender].add(msg.value);
        require(ethTotalAmount <= buyLimit, "Everyone should buy less than 3 eth.");
        uint256 sporeAmount = msg.value.mul(sporePrice);
        require(sporeAmount <= presaleLastSupply, "insufficient presale supply");
        presaleLastSupply = presaleLastSupply.sub(sporeAmount);
        spore.mint(msg.sender, sporeAmount);
        ethSupply[msg.sender] = ethTotalAmount;
        devAddress.transfer(msg.value);
        emit BuySporeSuccess(msg.sender, msg.value, sporeAmount);
    }
}

pragma solidity ^0.6.0;

import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title TokenVesting
 * @dev A token holder contract that can release its token balance gradually like a
 * typical vesting scheme, with a cliff and vesting period. Optionally revocable by the
 * owner.
 */
contract TokenVesting is Ownable {
    // The vesting schedule is time-based (i.e. using block timestamps as opposed to e.g. block numbers), and is
    // therefore sensitive to timestamp manipulation (which is something miners can do, to a certain degree). Therefore,
    // it is recommended to avoid using short time durations (less than a minute). Typical vesting schemes, with a
    // cliff period of a year and a duration of four years, are safe to use.
    // solhint-disable not-rely-on-time

    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event TokensReleased(address token, uint256 amount);
    event TokenVestingRevoked(address token);

    // beneficiary of tokens after they are released
    address private _beneficiary;

    // Durations and timestamps are expressed in UNIX time, the same units as block.timestamp.
    uint256 private _cliff;
    uint256 private _start;
    uint256 private _duration;

    bool private _revocable;

    mapping (address => uint256) private _released;
    mapping (address => bool) private _revoked;

    /**
     * @dev Creates a vesting contract that vests its balance of any ERC20 token to the
     * beneficiary, gradually in a linear fashion until start + duration. By then all
     * of the balance will have vested.
     * @param beneficiary address of the beneficiary to whom vested tokens are transferred
     * @param cliffDuration duration in seconds of the cliff in which tokens will begin to vest
     * @param start the time (as Unix time) at which point vesting starts
     * @param duration duration in seconds of the period in which the tokens will vest
     * @param revocable whether the vesting is revocable or not
     */
    constructor (address beneficiary, uint256 start, uint256 cliffDuration, uint256 duration, bool revocable) public {
        require(beneficiary != address(0), "TokenVesting: beneficiary is the zero address");
        // solhint-disable-next-line max-line-length
        require(cliffDuration <= duration, "TokenVesting: cliff is longer than duration");
        require(duration > 0, "TokenVesting: duration is 0");
        // solhint-disable-next-line max-line-length
        require(start.add(duration) > block.timestamp, "TokenVesting: final time is before current time");

        _beneficiary = beneficiary;
        _revocable = revocable;
        _duration = duration;
        _cliff = start.add(cliffDuration);
        _start = start;
    }

    /**
     * @return the beneficiary of the tokens.
     */
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /**
     * @return the cliff time of the token vesting.
     */
    function cliff() public view returns (uint256) {
        return _cliff;
    }

    /**
     * @return the start time of the token vesting.
     */
    function start() public view returns (uint256) {
        return _start;
    }

    /**
     * @return the duration of the token vesting.
     */
    function duration() public view returns (uint256) {
        return _duration;
    }

    /**
     * @return true if the vesting is revocable.
     */
    function revocable() public view returns (bool) {
        return _revocable;
    }

    /**
     * @return the amount of the token released.
     */
    function released(address token) public view returns (uint256) {
        return _released[token];
    }

    /**
     * @return true if the token is revoked.
     */
    function revoked(address token) public view returns (bool) {
        return _revoked[token];
    }

    /**
     * @notice Transfers vested tokens to beneficiary.
     * @param token ERC20 token which is being vested
     */
    function release(IERC20 token) public {
        uint256 unreleased = _releasableAmount(token);

        require(unreleased > 0, "TokenVesting: no tokens are due");

        _released[address(token)] = _released[address(token)].add(unreleased);

        token.safeTransfer(_beneficiary, unreleased);

        emit TokensReleased(address(token), unreleased);
    }

    /**
     * @notice Allows the owner to revoke the vesting. Tokens already vested
     * remain in the contract, the rest are returned to the owner.
     * @param token ERC20 token which is being vested
     */
    function revoke(IERC20 token) public onlyOwner {
        require(_revocable, "TokenVesting: cannot revoke");
        require(!_revoked[address(token)], "TokenVesting: token already revoked");

        uint256 balance = token.balanceOf(address(this));

        uint256 unreleased = _releasableAmount(token);
        uint256 refund = balance.sub(unreleased);

        _revoked[address(token)] = true;

        token.safeTransfer(owner(), refund);

        emit TokenVestingRevoked(address(token));
    }

    /**
     * @dev Calculates the amount that has already vested but hasn't been released yet.
     * @param token ERC20 token which is being vested
     */
    function _releasableAmount(IERC20 token) private view returns (uint256) {
        return _vestedAmount(token).sub(_released[address(token)]);
    }

    /**
     * @dev Calculates the amount that has already vested.
     * @param token ERC20 token which is being vested
     */
    function _vestedAmount(IERC20 token) private view returns (uint256) {
        uint256 currentBalance = token.balanceOf(address(this));
        uint256 totalBalance = currentBalance.add(_released[address(token)]);

        if (block.timestamp < _cliff) {
            return 0;
        } else if (block.timestamp >= _start.add(_duration) || _revoked[address(token)]) {
            return totalBalance;
        } else {
            return totalBalance.mul(block.timestamp.sub(_start)).div(_duration);
        }
    }
}

{
  "metadata": {
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"initialLiquidityManager_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"addInitialLiquidityTransferRights","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"addMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"enableTransfers","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initialLiquidityManager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"minters","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"removeMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000004f8fdc5d03b21ae85c5e451efe454d6e550ff761

-----Decoded View---------------
Arg [0] : initialLiquidityManager_ (address): 0x4f8fDC5D03B21aE85c5E451efE454D6e550fF761

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000004f8fdc5d03b21ae85c5e451efe454d6e550ff761