Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

//SPDX-License-Identifier: Unlicensed
pragma solidity 0.8.4;

import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@openzeppelin/contracts/token/ERC20/presets/ERC20PresetMinterPauser.sol';


contract OneUp is ERC20PresetMinterPauser, Ownable {
    using SafeMath for uint256;

    uint256 public tradingTime;
    uint256 public restrictionLiftTime;

    // Users need to wait this time for doing next transaction, after restricted time finish
    uint256 public delayBetweenTx = 30 seconds;

    uint256 public constant MAX_ALLOWED_TOKENS = 240000 ether;
    uint256 public constant MAX_SUPPLY = 100000000 ether;
    uint256 public constant RESTRICTED_TRANSFER_DELAY = 15 minutes;

    // Token holder > timestamp of the last transaction
    mapping (address => uint256) private _lastTx;

    // Addresses/contracts without time restrictions (Uniswap, Vesting and etc)
    mapping (address => bool) private _isWhitelisted;

    // Anti-bot solution
    modifier launchRestrict(address from, address to, uint256 amount) {
        // If trading time does not reached
        if (block.timestamp < tradingTime) {
            require(_isWhitelisted[from] || _isWhitelisted[to], 'launchRestrict: Transfers are disabled!');
        }

        // After trading time reached
        else if (block.timestamp >= tradingTime) {
            uint256 requiredDelay;

            // During the first restricted period tokens amount are limited
            if (block.timestamp < restrictionLiftTime) {
                require(amount <= MAX_ALLOWED_TOKENS, 'launchRestrict: Amount greater than max limit');
                 // During this period delay should be 60 seconds
                requiredDelay = 60 seconds;
            } else {
                requiredDelay = delayBetweenTx;
            }

            // If no one whitelisted, update data for both
            if (!_isWhitelisted[from] && !_isWhitelisted[to]) {
                require(_lastTx[from].add(requiredDelay) <= block.timestamp && _lastTx[to].add(requiredDelay) <= block.timestamp, 'launchRestrict: Only one tx/min in restricted mode!');

                _lastTx[from] = block.timestamp;
                _lastTx[to] = block.timestamp;
            }

            // If recipient not whitelisted, update data for recipient
            else if (!_isWhitelisted[to]){
                require(_lastTx[to].add(requiredDelay) <= block.timestamp, 'launchRestrict: Only one tx/min in restricted mode!');

                _lastTx[to] = block.timestamp;
            }

            // If sender not whitelisted, update data for sender
            else if (!_isWhitelisted[from]) {
                require(_lastTx[from].add(requiredDelay) <= block.timestamp, 'launchRestrict: Only one tx/min in restricted mode!');

                _lastTx[from] = block.timestamp;
            }
        }
        _;
    }

    // ------------------------
    // CONSTRUCTOR
    // ------------------------

    constructor () ERC20PresetMinterPauser('1-UP', '1-UP') {
        // Silence
    }

    // ------------------------
    // SETTERS (OWNABLE)
    // ------------------------

    function setTradingStart(uint256 time) external {
        require(tradingTime == 0, 'setTradingStart: Already saved!');
        require(hasRole(MINTER_ROLE, _msgSender()), 'setTradingStart: Must have minter role to set start time!');

        tradingTime = time;
        restrictionLiftTime = tradingTime.add(RESTRICTED_TRANSFER_DELAY);
    }

    function whitelistAccount(address account) external onlyOwner {
        _isWhitelisted[account] = true;
    }

    function removeWhitelistedAccount(address account) external onlyOwner {
        _isWhitelisted[account] = false;
    }

    function decreaseDelayBetweenTx(uint256 newDelay) external onlyOwner {
        require(newDelay < delayBetweenTx, 'decreaseDelayBetweenTx: New delay should be less from previous amount!');

        delayBetweenTx = newDelay;
    }

    // ------------------------
    // GETTERS
    // ------------------------

    function lastTx(address account) external view returns (uint256) {
        return _lastTx[account];
    }

    function isWhitelisted(address account) external view returns (bool) {
        return _isWhitelisted[account];
    }

    // ------------------------
    // INTERNAL
    // ------------------------

    function _mint(address account, uint256 amount) internal virtual override {
        require(ERC20.totalSupply() + amount <= MAX_SUPPLY, '_mint: Cap exceeded!');

        super._mint(account, amount);
    }

    function _beforeTokenTransfer(address from, address to, uint256 amount) internal launchRestrict(from, to, amount) virtual override(ERC20PresetMinterPauser) {
        super._beforeTokenTransfer(from, to, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../extensions/ERC20Burnable.sol";
import "../extensions/ERC20Pausable.sol";
import "../../../access/AccessControlEnumerable.sol";
import "../../../utils/Context.sol";

/**
 * @dev {ERC20} token, including:
 *
 *  - ability for holders to burn (destroy) their tokens
 *  - a minter role that allows for token minting (creation)
 *  - a pauser role that allows to stop all token transfers
 *
 * This contract uses {AccessControl} to lock permissioned functions using the
 * different roles - head to its documentation for details.
 *
 * The account that deploys the contract will be granted the minter and pauser
 * roles, as well as the default admin role, which will let it grant both minter
 * and pauser roles to other accounts.
 */
contract ERC20PresetMinterPauser is Context, AccessControlEnumerable, ERC20Burnable, ERC20Pausable {
    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /**
     * @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
     * account that deploys the contract.
     *
     * See {ERC20-constructor}.
     */
    constructor(string memory name, string memory symbol) ERC20(name, symbol) {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());

        _setupRole(MINTER_ROLE, _msgSender());
        _setupRole(PAUSER_ROLE, _msgSender());
    }

    /**
     * @dev Creates `amount` new tokens for `to`.
     *
     * See {ERC20-_mint}.
     *
     * Requirements:
     *
     * - the caller must have the `MINTER_ROLE`.
     */
    function mint(address to, uint256 amount) public virtual {
        require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
        _mint(to, amount);
    }

    /**
     * @dev Pauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_pause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function pause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_unpause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function unpause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
        _unpause();
    }

    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Pausable) {
        super._beforeTokenTransfer(from, to, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The defaut value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        _approve(sender, _msgSender(), currentAllowance - amount);

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        _approve(_msgSender(), spender, currentAllowance - subtractedValue);

        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        _balances[sender] = senderBalance - amount;
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        _balances[account] = accountBalance - amount;
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 currentAllowance = allowance(account, _msgSender());
        require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
        _approve(account, _msgSender(), currentAllowance - amount);
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../security/Pausable.sol";

/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 */
abstract contract ERC20Pausable is ERC20, Pausable {
    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        require(!paused(), "ERC20Pausable: token transfer while paused");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable {
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping (bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId
            || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {grantRole} to track enumerable memberships
     */
    function grantRole(bytes32 role, address account) public virtual override {
        super.grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {revokeRole} to track enumerable memberships
     */
    function revokeRole(bytes32 role, address account) public virtual override {
        super.revokeRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev Overload {renounceRole} to track enumerable memberships
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        super.renounceRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev Overload {_setupRole} to track enumerable memberships
     */
    function _setupRole(bytes32 role, address account) internal virtual override {
        super._setupRole(role, account);
        _roleMembers[role].add(account);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    function hasRole(bytes32 role, address account) external view returns (bool);
    function getRoleAdmin(bytes32 role) external view returns (bytes32);
    function grantRole(bytes32 role, address account) external;
    function revokeRole(bytes32 role, address account) external;
    function renounceRole(bytes32 role, address account) external;
}

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping (address => bool) members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId
            || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if(!hasRole(role, account)) {
            revert(string(abi.encodePacked(
                "AccessControl: account ",
                Strings.toHexString(uint160(account), 20),
                " is missing role ",
                Strings.toHexString(uint256(role), 32)
            )));
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant alphabet = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = alphabet[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_ALLOWED_TOKENS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PAUSER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RESTRICTED_TRANSFER_DELAY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newDelay","type":"uint256"}],"name":"decreaseDelayBetweenTx","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"delayBetweenTx","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"lastTx","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"removeWhitelistedAccount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"restrictionLiftTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"time","type":"uint256"}],"name":"setTradingStart","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tradingTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"whitelistAccount","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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