Token

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.20;

import {IERC721} from "./IERC721.sol";
import {IERC721Receiver} from "./IERC721Receiver.sol";
import {IERC721Metadata} from "./extensions/IERC721Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {Strings} from "../../utils/Strings.sol";
import {IERC165, ERC165} from "../../utils/introspection/ERC165.sol";
import {IERC721Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
abstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    mapping(uint256 tokenId => address) private _owners;

    mapping(address owner => uint256) private _balances;

    mapping(uint256 tokenId => address) private _tokenApprovals;

    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual returns (uint256) {
        if (owner == address(0)) {
            revert ERC721InvalidOwner(address(0));
        }
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual returns (address) {
        return _requireOwned(tokenId);
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {
        _requireOwned(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual {
        _approve(to, tokenId, _msgSender());
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual returns (address) {
        _requireOwned(tokenId);

        return _getApproved(tokenId);
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        address previousOwner = _update(to, tokenId, _msgSender());
        if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {
        transferFrom(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     *
     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the
     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances
     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by
     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.
     */
    function _getApproved(uint256 tokenId) internal view virtual returns (address) {
        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in
     * particular (ignoring whether it is owned by `owner`).
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {
        return
            spender != address(0) &&
            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);
    }

    /**
     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.
     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets
     * the `spender` for the specific `tokenId`.
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {
        if (!_isAuthorized(owner, spender, tokenId)) {
            if (owner == address(0)) {
                revert ERC721NonexistentToken(tokenId);
            } else {
                revert ERC721InsufficientApproval(spender, tokenId);
            }
        }
    }

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that
     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.
     *
     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the
     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership
     * remain consistent with one another.
     */
    function _increaseBalance(address account, uint128 value) internal virtual {
        unchecked {
            _balances[account] += value;
        }
    }

    /**
     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner
     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that
     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).
     *
     * Emits a {Transfer} event.
     *
     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.
     */
    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {
        address from = _ownerOf(tokenId);

        // Perform (optional) operator check
        if (auth != address(0)) {
            _checkAuthorized(from, auth, tokenId);
        }

        // Execute the update
        if (from != address(0)) {
            // Clear approval. No need to re-authorize or emit the Approval event
            _approve(address(0), tokenId, address(0), false);

            unchecked {
                _balances[from] -= 1;
            }
        }

        if (to != address(0)) {
            unchecked {
                _balances[to] += 1;
            }
        }

        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        return from;
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner != address(0)) {
            revert ERC721InvalidSender(address(0));
        }
    }

    /**
     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        _checkOnERC721Received(address(0), to, tokenId, data);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal {
        address previousOwner = _update(address(0), tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        } else if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients
     * are aware of the ERC721 standard to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is like {safeTransferFrom} in the sense that it invokes
     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `tokenId` token must exist and be owned by `from`.
     * - `to` cannot be the zero address.
     * - `from` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId) internal {
        _safeTransfer(from, to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is
     * either the owner of the token, or approved to operate on all tokens held by this owner.
     *
     * Emits an {Approval} event.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address to, uint256 tokenId, address auth) internal {
        _approve(to, tokenId, auth, true);
    }

    /**
     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not
     * emitted in the context of transfers.
     */
    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {
        // Avoid reading the owner unless necessary
        if (emitEvent || auth != address(0)) {
            address owner = _requireOwned(tokenId);

            // We do not use _isAuthorized because single-token approvals should not be able to call approve
            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {
                revert ERC721InvalidApprover(auth);
            }

            if (emitEvent) {
                emit Approval(owner, to, tokenId);
            }
        }

        _tokenApprovals[tokenId] = to;
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Requirements:
     * - operator can't be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        if (operator == address(0)) {
            revert ERC721InvalidOperator(operator);
        }
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).
     * Returns the owner.
     *
     * Overrides to ownership logic should be done to {_ownerOf}.
     */
    function _requireOwned(uint256 tokenId) internal view returns (address) {
        address owner = _ownerOf(tokenId);
        if (owner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
        return owner;
    }

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the
     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {
        if (to.code.length > 0) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                if (retval != IERC721Receiver.onERC721Received.selector) {
                    revert ERC721InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert ERC721InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.20;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the Merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates Merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     *@dev The multiproof provided is not valid.
     */
    error MerkleProofInvalidMultiproof();

    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     */
    function verifyCalldata(bytes32[] calldata proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Sorts the pair (a, b) and hashes the result.
     */
    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    /**
     * @dev Implementation of keccak256(abi.encode(a, b)) that doesn't allocate or expand memory.
     */
    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

//SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

/***********************************************************************************************
 *               ...                                                                           *
 *         *@@@@@@@@@@@-                    .                                                  *
 *      .@@@@@@@@@@@@@@@@#                =@@@*             :@@@@                              *
 *     *@@@@@@*.   :*@@@@@@               .@@@.              @@@:                              *
 *    :@@@@@:         =@@@@@                                                                   *
 *    @@@@@:           .@@@@* %@@#@@@@@@= .@@@: @@@     #@@= @@@: @@@     :@@@ @@@%     +%@+   *
 *   .@@@@#             @@@@@ @@@@@@@@@@@@.@@@+ @@@+   -@@@ .@@@= @@@     -@@@ @@@@*   *@@@#   *
 *   .@@@@=             @@@@@.@@@@     @@@+@@@+ =@@@   @@@= .@@@=.@@@.    -@@@.@@@@@. =@@@@*   *
 *   .@@@@#             @@@@@.@@@=.   :@@@+@@@=  @@@- =@@@  .@@@=.@@@.    -@@@.@@@@@@.@@@@@-   *
 *    @@@@@.           .@@@@@.@@@=@@@@@@@*.@@@-  #@@%.@@@:  .@@@: @@@:    =@@@.@@@@@@@@@@@@-   *
 *    .@@@@@.         :@@@@@- @@@::@@@@*  .@@@-  :@@@#@@%   .@@@. #@@@.  :@@@@.@@@*%@@@@@@@-   *
 *     +@@@@@@*:  .-#@@@@@@-  @@@.  @@@*  .@@@:   @@@@@@.    @@@. .@@@@@@@@@@: @@@* @@# @@@.   *
 *      .@@@@@@@@@@@@@@@@@    -==    ===   ===    :@@@@+     ===    :@@@@@@:   -==.  -  ###    *
 *        .%@@@@@@@@@@@+                                                                       *
 *             -+++:                                                                           *
 *                                                                                             *
 **********************************************************************************************/

import { ERC721 } from "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { MerkleTreeWhitelist } from "../../utils/MerkleTreeWhitelist.sol";

error MultiSigIsZeroAddress();
error MintPhaseNotStarted();
error SoldOut();
error MaxAmountMinted();
error MaxWLAmountMinted();

contract King2d is ERC721, ReentrancyGuard, MerkleTreeWhitelist {
	uint256 private _tokenIdTracker;

	uint256 public constant TOTAL_SUPPLY = 4444;
	uint256 public constant AMOUNT_ON_FREE_MINT = 4300;
	uint256 public constant MAX_WALLET_AMOUNT = 5;

	// Mint phases timestamps
	uint256 public immutable OPEN;
	uint256 public immutable WHITELIST;
	uint256 public immutable OG;

	address public immutable ORIVIUM_MULTI_SIG_WALLET;

	// Mapping between wallet and amount of nft minted
	mapping(address => uint256) public mintedAmount;

	// Mapping between wallet and if it has already minted during OG or whitelist phase
	mapping(address => bool) public whitelistMint;

	event King2dMinted(address minter, uint256 indexed tokenId);

	constructor(
		bytes32 _whitelistMerkleRoot,
		bytes32 _ogWhitelistMerkleRoot,
		uint256 _openMintTimestamp,
		address _oriviumMultiSigWallet
	) MerkleTreeWhitelist(_whitelistMerkleRoot, _ogWhitelistMerkleRoot) ERC721("King2d", "KING2D") {
		if (_oriviumMultiSigWallet == address(0)) revert MultiSigIsZeroAddress();
		ORIVIUM_MULTI_SIG_WALLET = _oriviumMultiSigWallet;
		OPEN = _openMintTimestamp;
		WHITELIST = OPEN - 15 minutes;
		OG = WHITELIST - 15 minutes;

		// Minting 144 reserved tokens to the Orivium multisig wallet,
		// these tokens will be used for partnerships and marketing purposes
		for (uint256 i = AMOUNT_ON_FREE_MINT + 1; i <= TOTAL_SUPPLY; i += 1) {
			_safeMint(_oriviumMultiSigWallet, i);
		}
	}

	function _baseURI() internal view virtual override returns (string memory) {
		return "https://nft.orivium.io/nft/king2d/";
	}

	/*********************************************
	 *                  MINT INFOS               *
	 *                                           *
	 * Amount to mint: 4300                      *
	 *                                           *
	 * Limit:                                    *
	 * 	- 1 during OG and Whitelist phase        *
	 *  - a total of 5 per wallet                *
	 *                                           *
	 * Phases:                                   *
	 * - OG: 15 minutes before whitelist mint    *
	 * - Whitelist: 15 minutes before open mint  *
	 ********************************************/

	modifier mintPhase(uint256 _timestamp) {
		if (block.timestamp < _timestamp) revert MintPhaseNotStarted();
		_;
	}

	function freeMint() public nonReentrant mintPhase(OPEN) {
		_freeMint(_msgSender());
	}

	function freeBatchMint(uint256 _batch) public nonReentrant mintPhase(OPEN) {
		_freeBatchMint(_msgSender(), _batch);
	}

	function freeMintWhitelist(
		bytes32[] calldata _proof
	) public nonReentrant onlyWL(_proof) mintPhase(WHITELIST) {
		_freeMintWhitelist(_msgSender());
	}

	function freeMintOG(
		bytes32[] calldata _proof
	) public nonReentrant onlyOG(_proof) mintPhase(OG) {
		_freeMintWhitelist(_msgSender());
	}

	function walletMintable(address _wallet) public view returns (uint256) {
		return MAX_WALLET_AMOUNT - mintedAmount[_wallet];
	}

	function _freeMintWhitelist(address _to) private {
		if (whitelistMint[_to]) revert MaxWLAmountMinted();
		whitelistMint[_to] = true;
		_freeMint(_to);
	}

	function _freeMint(address _to) private {
		if (_tokenIdTracker >= AMOUNT_ON_FREE_MINT) revert SoldOut();
		if (mintedAmount[_to] >= MAX_WALLET_AMOUNT) revert MaxAmountMinted();
		mintedAmount[_to] += 1;
		__freeMint(_to);
	}

	function _freeBatchMint(address _to, uint256 _batch) private {
		if (_tokenIdTracker + _batch > AMOUNT_ON_FREE_MINT) revert SoldOut();
		if (mintedAmount[_to] + _batch > MAX_WALLET_AMOUNT) revert MaxAmountMinted();
		mintedAmount[_to] += _batch;
		for (uint256 i; i < _batch; i += 1) {
			__freeMint(_to);
		}
	}

	function __freeMint(address _to) private {
		_tokenIdTracker += 1;
		emit King2dMinted(_to, _tokenIdTracker);
		_safeMint(_to, _tokenIdTracker);
	}

	/*********************************************
	 *                  UTILS                    *
	 ********************************************/

	function walletOfOwner(address _owner) public view returns (uint256[] memory) {
		uint256 tokenCount = balanceOf(_owner);
		uint256 index = 0;
		uint256[] memory tokensId = new uint256[](tokenCount);

		if (tokenCount == 0) return new uint256[](0);

		for (uint256 i = 1; i <= TOTAL_SUPPLY; i += 1) {
			if (_ownerOf(i) != _owner) continue;
			tokensId[index] = i;
			index++;
			if (index == tokenCount) break;
		}

		return tokensId;
	}
}

// contracts/utils/MerkTreeWhitelist/.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { Context } from "@openzeppelin/contracts/utils/Context.sol";
import { MerkleProof } from "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";

error NotUniqueRootHash();
error OnlyWhitelist();
error OnlyOGWhitelist();

abstract contract MerkleTreeWhitelist is Context {
	bytes32 private root;
	bytes32 private ogRoot;

	constructor(bytes32 _root, bytes32 _ogRoot) {
		if (_root == _ogRoot) revert NotUniqueRootHash();
		root = _root;
		ogRoot = _ogRoot;
	}

	modifier onlyWL(bytes32[] calldata _proof) {
		if (!isWhitelisted(_msgSender(), _proof)) revert OnlyWhitelist();
		_;
	}

	modifier onlyOG(bytes32[] calldata _proof) {
		if (!isOGWhitelisted(_msgSender(), _proof)) revert OnlyOGWhitelist();
		_;
	}

	function isWhitelisted(address _address, bytes32[] calldata _proof) public view returns (bool) {
		bytes32 leaf = keccak256(abi.encodePacked(_address));
		return MerkleProof.verify(_proof, root, leaf);
	}

	function isOGWhitelisted(
		address _address,
		bytes32[] calldata _proof
	) public view returns (bool) {
		bytes32 leaf = keccak256(abi.encodePacked(_address));
		return MerkleProof.verify(_proof, ogRoot, leaf);
	}
}

{
  "optimizer": {
    "enabled": true,
    "runs": 100000
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"bytes32","name":"_whitelistMerkleRoot","type":"bytes32"},{"internalType":"bytes32","name":"_ogWhitelistMerkleRoot","type":"bytes32"},{"internalType":"uint256","name":"_openMintTimestamp","type":"uint256"},{"internalType":"address","name":"_oriviumMultiSigWallet","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC721IncorrectOwner","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC721InsufficientApproval","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC721InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"ERC721InvalidOperator","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"ERC721InvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC721InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC721InvalidSender","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC721NonexistentToken","type":"error"},{"inputs":[],"name":"MaxAmountMinted","type":"error"},{"inputs":[],"name":"MaxWLAmountMinted","type":"error"},{"inputs":[],"name":"MintPhaseNotStarted","type":"error"},{"inputs":[],"name":"MultiSigIsZeroAddress","type":"error"},{"inputs":[],"name":"NotUniqueRootHash","type":"error"},{"inputs":[],"name":"OnlyOGWhitelist","type":"error"},{"inputs":[],"name":"OnlyWhitelist","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[],"name":"SoldOut","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"minter","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"King2dMinted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"AMOUNT_ON_FREE_MINT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_WALLET_AMOUNT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OG","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OPEN","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ORIVIUM_MULTI_SIG_WALLET","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TOTAL_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"WHITELIST","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_batch","type":"uint256"}],"name":"freeBatchMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"freeMint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"freeMintOG","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"freeMintWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"isOGWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"isWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"mintedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_wallet","type":"address"}],"name":"walletMintable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"walletOfOwner","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"whitelistMint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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

a3829a95a2be79778b3d924c8e859ab137bc1ff662fe45689d22b87f51a7ef64fb045b35940e91b34914d7e8a1350ccc3613bd1b92ed77b07bf790e8dc15c2e00000000000000000000000000000000000000000000000000000000065b5217800000000000000000000000067c658440728c3afecc036d81aaa2d30c98fd444

-----Decoded View---------------
Arg [0] : _whitelistMerkleRoot (bytes32): 0xa3829a95a2be79778b3d924c8e859ab137bc1ff662fe45689d22b87f51a7ef64
Arg [1] : _ogWhitelistMerkleRoot (bytes32): 0xfb045b35940e91b34914d7e8a1350ccc3613bd1b92ed77b07bf790e8dc15c2e0
Arg [2] : _openMintTimestamp (uint256): 1706369400
Arg [3] : _oriviumMultiSigWallet (address): 0x67C658440728c3afEcC036D81aAa2d30C98Fd444

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : a3829a95a2be79778b3d924c8e859ab137bc1ff662fe45689d22b87f51a7ef64
Arg [1] : fb045b35940e91b34914d7e8a1350ccc3613bd1b92ed77b07bf790e8dc15c2e0
Arg [2] : 0000000000000000000000000000000000000000000000000000000065b52178
Arg [3] : 00000000000000000000000067c658440728c3afecc036d81aaa2d30c98fd444