Feature Tip: Add private address tag to any address under My Name Tag !
ERC-20
Overview
Max Total Supply
1,000,000 DEBASE
Holders
305
Market
Onchain Market Cap
$0.00
Circulating Supply Market Cap
-
Other Info
Token Contract (WITH 18 Decimals)
Balance
1.963969400367329169 DEBASEValue
$0.00Loading...
Loading
Loading...
Loading
Loading...
Loading
# | Exchange | Pair | Price | 24H Volume | % Volume |
---|
Contract Name:
Debase
Compiler Version
v0.6.6+commit.6c089d02
Optimization Enabled:
Yes with 200 runs
Other Settings:
default evmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return msg.sender; } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of decimals of the tokens. */ function decimals() external view returns(uint8); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address sender, address recipient, uint256 amount) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); } /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies in extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{ value: amount }(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) { return _functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); return _functionCallWithValue(target, data, value, errorMessage); } function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) { require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{ value: weiValue }(data); if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin guidelines: functions revert instead * of returning `false` on failure. This behavior is nonetheless conventional * and does not conflict with the expectations of ERC20 applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20 { using SafeMath for uint256; using Address for address; mapping (address => uint256) private _balances; mapping (address => mapping (address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; /** * @dev Sets the values for {name} and {symbol}, initializes {decimals} with * a default value of 18. * * To select a different value for {decimals}, use {_setupDecimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor (string memory name, string memory symbol, uint8 decimals) public { _name = name; _symbol = symbol; _decimals = decimals; } /** * @dev Returns the name of the token. */ function name() public view returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5,05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is * called. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view override returns (uint8) { return _decimals; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view virtual override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public virtual override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}; * * Requirements: * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for ``sender``'s tokens of at least * `amount`. */ function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) { _transfer(sender, recipient, amount); _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance")); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue)); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero")); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer(address sender, address recipient, uint256 amount) internal virtual { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(sender, recipient, amount); _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance"); _balances[recipient] = _balances[recipient].add(amount); emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply = _totalSupply.add(amount); _balances[account] = _balances[account].add(amount); emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance"); _totalSupply = _totalSupply.sub(amount); emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens. * * This is internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Sets {decimals} to a value other than the default one of 18. * * WARNING: This function should only be called from the constructor. Most * applications that interact with token contracts will not expect * {decimals} to ever change, and may work incorrectly if it does. */ function _setupDecimals(uint8 decimals_) internal { _decimals = decimals_; } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be to transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized"); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } /* MIT License Copyright (c) 2018 requestnetwork Copyright (c) 2018 Fragments, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ /** * @title SafeMathInt * @dev Math operations for int256 with overflow safety checks. */ library SafeMathInt { int256 private constant MIN_INT256 = int256(1) << 255; int256 private constant MAX_INT256 = ~(int256(1) << 255); /** * @dev Multiplies two int256 variables and fails on overflow. */ function mul(int256 a, int256 b) internal pure returns (int256) { int256 c = a * b; // Detect overflow when multiplying MIN_INT256 with -1 require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256)); require((b == 0) || (c / b == a)); return c; } /** * @dev Division of two int256 variables and fails on overflow. */ function div(int256 a, int256 b) internal pure returns (int256) { // Prevent overflow when dividing MIN_INT256 by -1 require(b != -1 || a != MIN_INT256); // Solidity already throws when dividing by 0. return a / b; } /** * @dev Subtracts two int256 variables and fails on overflow. */ function sub(int256 a, int256 b) internal pure returns (int256) { int256 c = a - b; require((b >= 0 && c <= a) || (b < 0 && c > a)); return c; } /** * @dev Adds two int256 variables and fails on overflow. */ function add(int256 a, int256 b) internal pure returns (int256) { int256 c = a + b; require((b >= 0 && c >= a) || (b < 0 && c < a)); return c; } /** * @dev Converts to absolute value, and fails on overflow. */ function abs(int256 a) internal pure returns (int256) { require(a != MIN_INT256); return a < 0 ? -a : a; } } /** * @title uFragments ERC20 token * @dev This is part of an implementation of the uFragments Ideal Money protocol. * uFragments is a normal ERC20 token, but its supply can be adjusted by splitting and * combining tokens proportionally across all wallets. * * uFragment balances are internally represented with a hidden denomination, 'gons'. * We support splitting the currency in expansion and combining the currency on contraction by * changing the exchange rate between the hidden 'gons' and the public 'fragments'. */ contract Debase is ERC20, Initializable { // PLEASE READ BEFORE CHANGING ANY ACCOUNTING OR MATH // Anytime there is division, there is a risk of numerical instability from rounding errors. In // order to minimize this risk, we adhere to the following guidelines: // 1) The conversion rate adopted is the number of gons that equals 1 fragment. // The inverse rate must not be used--TOTAL_GONS is always the numerator and _totalSupply is // always the denominator. (i.e. If you want to convert gons to fragments instead of // multiplying by the inverse rate, you should divide by the normal rate) // 2) Gon balances converted into Fragments are always rounded down (truncated). // // We make the following guarantees: // - If address 'A' transfers x Fragments to address 'B'. A's resulting external balance will // be decreased by precisely x Fragments, and B's external balance will be precisely // increased by x Fragments. // // We do not guarantee that the sum of all balances equals the result of calling totalSupply(). // This is because, for any conversion function 'f()' that has non-zero rounding error, // f(x0) + f(x1) + ... + f(xn) is not always equal to f(x0 + x1 + ... xn). using SafeMath for uint256; using SafeMathInt for int256; event LogRebase(uint256 indexed epoch_, uint256 totalSupply_); // Used for authentication address public debasePolicy; modifier onlyDebasePolicy() { require(msg.sender == debasePolicy); _; } modifier validRecipient(address to) { require(to != address(0x0)); require(to != address(this)); _; } uint256 private constant DECIMALS = 18; uint256 private constant MAX_UINT256 = ~uint256(0); uint256 private constant INITIAL_FRAGMENTS_SUPPLY = 1000000 * 10**DECIMALS; // TOTAL_GONS is a multiple of INITIAL_FRAGMENTS_SUPPLY so that _gonsPerFragment is an integer. // Use the highest value that fits in a uint256 for max granularity. uint256 private constant TOTAL_GONS = MAX_UINT256 - (MAX_UINT256 % INITIAL_FRAGMENTS_SUPPLY); // MAX_SUPPLY = maximum integer < (sqrt(4*TOTAL_GONS + 1) - 1) / 2 uint256 private constant MAX_SUPPLY = ~uint128(0); // (2^128) - 1 uint256 private _totalSupply; uint256 private _gonsPerFragment; mapping(address => uint256) private _gonBalances; // This is denominated in Fragments, because the gons-fragments conversion might change before // it's fully paid. mapping(address => mapping(address => uint256)) private _allowedFragments; constructor() public ERC20("Debase", "DEBASE", uint8(DECIMALS)) {} /** * @notice Initializes with the policy,Dai,DaiLp pool as parameters. The function then sets the total supply to the initial supply and calculates the gon per fragment. It also sets the value and the gons for both the Dai and DaiLp reward pools. * @param debaseDaiPool_ Address of the Debase Dai pool contract * @param debaseDaiLpPool_ Address of the Debase Dai LP pool contract * @param debasePolicy_ Address of the Debase policy contract */ function initialize( address debaseDaiPool_, uint256 debaseDaiTotalRatio, address debaseDaiLpPool_, uint256 debaseDaiLpTotalRatio, address debasePolicy_, uint256 debasePolicyTotalRatio ) external initializer { require( debaseDaiTotalRatio.add(debaseDaiLpTotalRatio).add( debasePolicyTotalRatio ) == 100 ); _totalSupply = INITIAL_FRAGMENTS_SUPPLY; _gonsPerFragment = TOTAL_GONS.div(_totalSupply); debasePolicy = debasePolicy_; uint256 debaseDaiPoolVal = _totalSupply.mul(debaseDaiTotalRatio).div( 100 ); uint256 debaseDaiPoolGons = debaseDaiPoolVal.mul(_gonsPerFragment); uint256 debaseDaiLpPoolVal = _totalSupply .mul(debaseDaiLpTotalRatio) .div(100); uint256 debaseDaiLpPoolGons = debaseDaiLpPoolVal.mul(_gonsPerFragment); uint256 debasePolicyPoolVal = _totalSupply .mul(debasePolicyTotalRatio) .div(100); uint256 debasePolicyGons = debasePolicyPoolVal.mul(_gonsPerFragment); _gonBalances[debaseDaiPool_] = debaseDaiPoolGons; _gonBalances[debaseDaiLpPool_] = debaseDaiLpPoolGons; _gonBalances[debasePolicy] = debasePolicyGons; emit Transfer(address(0x0), debaseDaiPool_, debaseDaiPoolVal); emit Transfer(address(0x0), debaseDaiLpPool_, debaseDaiLpPoolVal); emit Transfer(address(0x0), debasePolicy, debasePolicyPoolVal); } /** * @dev Notifies Fragments contract about a new rebase cycle. * @param supplyDelta The number of new fragment tokens to add into circulation via expansion. * @return The total number of fragments after the supply adjustment. */ function rebase(uint256 epoch, int256 supplyDelta) external onlyDebasePolicy returns (uint256) { if (supplyDelta == 0) { emit LogRebase(epoch, _totalSupply); return _totalSupply; } if (supplyDelta < 0) { _totalSupply = _totalSupply.sub(uint256(supplyDelta.abs())); } else { _totalSupply = _totalSupply.add(uint256(supplyDelta)); } if (_totalSupply > MAX_SUPPLY) { _totalSupply = MAX_SUPPLY; } _gonsPerFragment = TOTAL_GONS.div(_totalSupply); // From this point forward, _gonsPerFragment is taken as the source of truth. // We recalculate a new _totalSupply to be in agreement with the _gonsPerFragment // conversion rate. // This means our applied supplyDelta can deviate from the requested supplyDelta, // but this deviation is guaranteed to be < (_totalSupply^2)/(TOTAL_GONS - _totalSupply). // // In the case of _totalSupply <= MAX_UINT128 (our current supply cap), this // deviation is guaranteed to be < 1, so we can omit this step. If the supply cap is // ever increased, it must be re-included. // _totalSupply = TOTAL_GONS.div(_gonsPerFragment) emit LogRebase(epoch, _totalSupply); return _totalSupply; } /** * @return The total number of fragments. */ function totalSupply() public override view returns (uint256) { return _totalSupply; } /** * @param who The address to query. * @return The balance of the specified address. */ function balanceOf(address who) public override view returns (uint256) { return _gonBalances[who].div(_gonsPerFragment); } /** * @dev Transfer tokens to a specified address. * @param to The address to transfer to. * @param value The amount to be transferred. * @return True on success, false otherwise. */ function transfer(address to, uint256 value) public override validRecipient(to) returns (bool) { uint256 gonValue = value.mul(_gonsPerFragment); _gonBalances[msg.sender] = _gonBalances[msg.sender].sub(gonValue); _gonBalances[to] = _gonBalances[to].add(gonValue); emit Transfer(msg.sender, to, value); return true; } /** * @dev Function to check the amount of tokens that an owner has allowed to a spender. * @param owner_ The address which owns the funds. * @param spender The address which will spend the funds. * @return The number of tokens still available for the spender. */ function allowance(address owner_, address spender) public override view returns (uint256) { return _allowedFragments[owner_][spender]; } /** * @dev Transfer tokens from one address to another. * @param from The address you want to send tokens from. * @param to The address you want to transfer to. * @param value The amount of tokens to be transferred. */ function transferFrom( address from, address to, uint256 value ) public override validRecipient(to) returns (bool) { _allowedFragments[from][msg.sender] = _allowedFragments[from][msg .sender] .sub(value); uint256 gonValue = value.mul(_gonsPerFragment); _gonBalances[from] = _gonBalances[from].sub(gonValue); _gonBalances[to] = _gonBalances[to].add(gonValue); emit Transfer(from, to, value); return true; } /** * @dev Approve the passed address to spend the specified amount of tokens on behalf of * msg.sender. This method is included for ERC20 compatibility. * increaseAllowance and decreaseAllowance should be used instead. * Changing an allowance with this method brings the risk that someone may transfer both * the old and the new allowance - if they are both greater than zero - if a transfer * transaction is mined before the later approve() call is mined. * * @param spender The address which will spend the funds. * @param value The amount of tokens to be spent. */ function approve(address spender, uint256 value) public override returns (bool) { _allowedFragments[msg.sender][spender] = value; emit Approval(msg.sender, spender, value); return true; } /** * @dev Increase the amount of tokens that an owner has allowed to a spender. * This method should be used instead of approve() to avoid the double approval vulnerability * described above. * @param spender The address which will spend the funds. * @param addedValue The amount of tokens to increase the allowance by. */ function increaseAllowance(address spender, uint256 addedValue) public override returns (bool) { _allowedFragments[msg.sender][spender] = _allowedFragments[msg .sender][spender] .add(addedValue); emit Approval( msg.sender, spender, _allowedFragments[msg.sender][spender] ); return true; } /** * @dev Decrease the amount of tokens that an owner has allowed to a spender. * * @param spender The address which will spend the funds. * @param subtractedValue The amount of tokens to decrease the allowance by. */ function decreaseAllowance(address spender, uint256 subtractedValue) public override returns (bool) { uint256 oldValue = _allowedFragments[msg.sender][spender]; if (subtractedValue >= oldValue) { _allowedFragments[msg.sender][spender] = 0; } else { _allowedFragments[msg.sender][spender] = oldValue.sub( subtractedValue ); } emit Approval( msg.sender, spender, _allowedFragments[msg.sender][spender] ); return true; } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; pragma experimental ABIEncoderV2; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } /* MIT License Copyright (c) 2018 requestnetwork Copyright (c) 2018 Fragments, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ /** * @title SafeMathInt * @dev Math operations for int256 with overflow safety checks. */ library SafeMathInt { int256 private constant MIN_INT256 = int256(1) << 255; int256 private constant MAX_INT256 = ~(int256(1) << 255); /** * @dev Multiplies two int256 variables and fails on overflow. */ function mul(int256 a, int256 b) internal pure returns (int256) { int256 c = a * b; // Detect overflow when multiplying MIN_INT256 with -1 require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256)); require((b == 0) || (c / b == a)); return c; } /** * @dev Division of two int256 variables and fails on overflow. */ function div(int256 a, int256 b) internal pure returns (int256) { // Prevent overflow when dividing MIN_INT256 by -1 require(b != -1 || a != MIN_INT256); // Solidity already throws when dividing by 0. return a / b; } /** * @dev Subtracts two int256 variables and fails on overflow. */ function sub(int256 a, int256 b) internal pure returns (int256) { int256 c = a - b; require((b >= 0 && c <= a) || (b < 0 && c > a)); return c; } /** * @dev Adds two int256 variables and fails on overflow. */ function add(int256 a, int256 b) internal pure returns (int256) { int256 c = a + b; require((b >= 0 && c >= a) || (b < 0 && c < a)); return c; } /** * @dev Converts to absolute value, and fails on overflow. */ function abs(int256 a) internal pure returns (int256) { require(a != MIN_INT256); return a < 0 ? -a : a; } } /** * @title Various utilities useful for uint256. */ library UInt256Lib { uint256 private constant MAX_INT256 = ~(uint256(1) << 255); /** * @dev Safely converts a uint256 to an int256. */ function toInt256Safe(uint256 a) internal pure returns (int256) { require(a <= MAX_INT256); return int256(a); } } interface IOracle { function getData() external returns (uint256, bool); } interface DebaseI { function totalSupply() external view returns (uint256); function balanceOf(address who) external returns (uint256); function rebase(uint256 epoch, int256 supplyDelta) external returns (uint256); function transfer(address to, uint256 value) external returns (bool); } interface StabilizerI { function owner() external returns (address); function checkStabilizerAndGetReward( int256 supplyDelta_, int256 rebaseLag_, uint256 exchangeRate_, uint256 debasePolicyBalance ) external returns (uint256 rewardAmount_); } /** * @title Debase Monetary Supply Policy * @dev This is an implementation of the Debase Ideal Money protocol. * Debase operates asymmetrically on expansion and contraction. It will both split and * combine coins to maintain a stable unit price. * * This component regulates the token supply of the Debase ERC20 token in response to * market oracles. */ contract DebasePolicy is Ownable, Initializable { using SafeMath for uint256; using SafeMathInt for int256; using UInt256Lib for uint256; event LogRebase( uint256 indexed epoch_, uint256 exchangeRate_, int256 requestedSupplyAdjustment_, int256 rebaseLag_, uint256 timestampSec_ ); event LogSetDeviationThreshold( uint256 lowerDeviationThreshold_, uint256 upperDeviationThreshold_ ); event LogSetDefaultRebaseLag( uint256 defaultPositiveRebaseLag_, uint256 defaultNegativeRebaseLag_ ); event LogSetUseDefaultRebaseLag(bool useDefaultRebaseLag_); event LogUsingDefaultRebaseLag(int256 defaultRebaseLag_); event LogSetRebaseTimingParameters( uint256 minRebaseTimeIntervalSec_, uint256 rebaseWindowOffsetSec_, uint256 rebaseWindowLengthSec_ ); event LogSetOracle(address oracle_); event LogNewLagBreakpoint( bool indexed selected, int256 indexed lowerDelta_, int256 indexed upperDelta_, int256 lag_ ); event LogUpdateBreakpoint( bool indexed selected, int256 indexed lowerDelta_, int256 indexed upperDelta_, int256 lag_ ); event LogDeleteBreakpoint( bool indexed selected, int256 lowerDelta_, int256 upperDelta_, int256 lag_ ); event LogSelectedBreakpoint( int256 lowerDelta_, int256 upperDelta_, int256 lag_ ); event LogSetPriceTargetRate(uint256 setPriceTargetRate_); event LogDeleteStabilizerPool(StabilizerI pool_); event LogAddNewStabilizerPool(StabilizerI pool_); event LogSetStabilizerPoolEnabled(uint256 index_, bool enabled_); event LogRewardSentToStabilizer( uint256 index, StabilizerI poolI, uint256 transferAmount ); // Struct of rebase lag break point. It defines the supply delta range within which the lag can be applied. struct LagBreakpoint { int256 lowerDelta; int256 upperDelta; int256 lag; } struct StabilizerPool { bool enabled; StabilizerI pool; } // Address of the debase token DebaseI public debase; // Market oracle provides the token/USD exchange rate as an 18 decimal fixed point number. // (eg) An oracle value of 1.5e18 it would mean 1 Ample is trading for $1.50. IOracle public oracle; // If the current exchange rate is within this fractional distance from the target, no supply // update is performed. Fixed point number--same format as the rate. // (ie) (rate - targetRate) / targetRate < upperdeviationThreshold or lowerdeviationThreshold, then no supply change. // DECIMALS Fixed point number. // deviationThreshold = 0.05e18 = 5e16 uint256 public upperDeviationThreshold; uint256 public lowerDeviationThreshold; //Flag to use default rebase lag instead of the breakpoints. bool public useDefaultRebaseLag; // The rebase lag parameter, used to dampen the applied supply adjustment by 1 / rebaseLag // Check setRebaseLag comments for more details. // Natural number, no decimal places. uint256 public defaultPositiveRebaseLag; uint256 public defaultNegativeRebaseLag; //List of breakpoints for positive supply delta LagBreakpoint[] public upperLagBreakpoints; //List of breakpoints for negative supply delta LagBreakpoint[] public lowerLagBreakpoints; // More than this much time must pass between rebase operations. uint256 public minRebaseTimeIntervalSec; // Block timestamp of last rebase operation uint256 public lastRebaseTimestampSec; // The rebase window begins this many seconds into the minRebaseTimeInterval period. // For example if minRebaseTimeInterval is 24hrs, it represents the time of day in seconds. uint256 public rebaseWindowOffsetSec; // The length of the time window where a rebase operation is allowed to execute, in seconds. uint256 public rebaseWindowLengthSec; StabilizerPool[] public stabilizerPools; // THe price target to meet uint256 public priceTargetRate = 10**DECIMALS; // The number of rebase cycles since inception uint256 public epoch; uint256 private constant DECIMALS = 18; // Due to the expression in computeSupplyDelta(), MAX_RATE * MAX_SUPPLY must fit into an int256. // Both are 18 decimals fixed point numbers. uint256 private constant MAX_RATE = 10**6 * 10**DECIMALS; // MAX_SUPPLY = MAX_INT256 / MAX_RATE uint256 private constant MAX_SUPPLY = ~(uint256(1) << 255) / MAX_RATE; // This module orchestrates the rebase execution and downstream notification. address public orchestrator; modifier onlyOrchestrator() { require(msg.sender == orchestrator); _; } modifier indexInBounds(uint256 index) { require( index < stabilizerPools.length, "Index must be less than array length" ); _; } /** * @notice Initializes the debase policy with addresses of the debase token and the oracle deployer. Along with inital rebasing parameters * @param debase_ Address of the debase token * @param orchestrator_ Address of the protocol orchestrator */ function initialize(address debase_, address orchestrator_) external initializer onlyOwner { debase = DebaseI(debase_); orchestrator = orchestrator_; upperDeviationThreshold = 5 * 10**(DECIMALS - 2); lowerDeviationThreshold = 5 * 10**(DECIMALS - 2); useDefaultRebaseLag = false; defaultPositiveRebaseLag = 30; defaultNegativeRebaseLag = 30; minRebaseTimeIntervalSec = 5 minutes; lastRebaseTimestampSec = 0; rebaseWindowOffsetSec = 0; rebaseWindowLengthSec = 3 minutes; priceTargetRate = 10**DECIMALS; epoch = 0; } function addNewStabilizerPool(address pool_) external onlyOwner { StabilizerPool memory instance = StabilizerPool( false, StabilizerI(pool_) ); require( instance.pool.owner() == owner(), "Must have the same owner as policy contract" ); stabilizerPools.push(instance); emit LogAddNewStabilizerPool(instance.pool); } function deleteStabilizerPool(uint256 index) external indexInBounds(index) onlyOwner { StabilizerPool memory instanceToDelete = stabilizerPools[index]; require( instanceToDelete.enabled == false, "Only a disabled pool can be deleted" ); uint256 length = stabilizerPools.length.sub(1); if (index < length) { stabilizerPools[index] = stabilizerPools[length]; } emit LogDeleteStabilizerPool(instanceToDelete.pool); stabilizerPools.pop(); delete instanceToDelete; } function setStabilizerPoolEnabled(uint256 index, bool enabled) external indexInBounds(index) onlyOwner { StabilizerPool storage instance = stabilizerPools[index]; instance.enabled = enabled; emit LogSetStabilizerPoolEnabled(index, instance.enabled); } /** * @notice Sets the price target for rebases to compare against * @param priceTargetRate_ The new price target */ function setPriceTargetRate(uint256 priceTargetRate_) external onlyOwner { require(priceTargetRate_ > 0); priceTargetRate = priceTargetRate_; emit LogSetPriceTargetRate(priceTargetRate_); } /** * @notice Function to set the oracle to get the exchange price * @param oracle_ Address of the debase oracle */ function setOracle(address oracle_) external onlyOwner { oracle = IOracle(oracle_); emit LogSetOracle(oracle_); } /** * @notice Initiates a new rebase operation, provided the minimum time period has elapsed. * @dev The supply adjustment equals (_totalSupply * DeviationFromTargetRate) / rebaseLag * Where DeviationFromTargetRate is (MarketOracleRate - targetRate) / targetRate * and targetRate is CpiOracleRate / baseCpi */ function rebase() external onlyOrchestrator { require(inRebaseWindow(), "Not in rebase window"); //This comparison also ensures there is no reentrancy. require(lastRebaseTimestampSec.add(minRebaseTimeIntervalSec) < now); //Snap the rebase time to the start of this window. lastRebaseTimestampSec = now.sub(now.mod(minRebaseTimeIntervalSec)).add( rebaseWindowOffsetSec ); epoch = epoch.add(1); uint256 exchangeRate; bool rateValid; (exchangeRate, rateValid) = oracle.getData(); require(rateValid); if (exchangeRate > MAX_RATE) { exchangeRate = MAX_RATE; } int256 supplyDelta = computeSupplyDelta(exchangeRate, priceTargetRate); int256 rebaseLag; if (supplyDelta != 0) { //Get rebase lag if the supply delta isn't zero rebaseLag = getRebaseLag(supplyDelta); // Apply the Dampening factor. supplyDelta = supplyDelta.div(rebaseLag); } if ( supplyDelta > 0 && debase.totalSupply().add(uint256(supplyDelta)) > MAX_SUPPLY ) { supplyDelta = (MAX_SUPPLY.sub(debase.totalSupply())).toInt256Safe(); } checkStabilizers(supplyDelta, rebaseLag, exchangeRate); uint256 supplyAfterRebase = debase.rebase(epoch, supplyDelta); assert(supplyAfterRebase <= MAX_SUPPLY); emit LogRebase(epoch, exchangeRate, supplyDelta, rebaseLag, now); } function checkStabilizers( int256 supplyDelta_, int256 rebaseLag_, uint256 exchangeRate_ ) internal { for ( uint256 index = 0; index < stabilizerPools.length; index = index.add(1) ) { StabilizerPool memory instance = stabilizerPools[index]; if (instance.enabled) { uint256 rewardToTransfer = instance .pool .checkStabilizerAndGetReward( supplyDelta_, rebaseLag_, exchangeRate_, debase.balanceOf(address(this)) ); if (rewardToTransfer != 0) { debase.transfer(address(instance.pool), rewardToTransfer); emit LogRewardSentToStabilizer( index, instance.pool, rewardToTransfer ); } } } } /** * @notice Returns an apporiate rebase lag based either upon the inputed supply delta. The lag is either chose from an array of negative or positive * supply delta. This allows of the application of unsymmetrical lag based upon the current supply delta. * The function will also pick the default rebase lag if it's set to do so by the default rebase lag flag or if the breakpoint arrays are empty. * @param supplyDelta_ The new supply from give to get a corresponding rebase lag. * @return The selected rebase lag to apply. */ function getRebaseLag(int256 supplyDelta_) private returns (int256) { int256 lag; int256 supplyDeltaAbs = supplyDelta_.abs(); if (useDefaultRebaseLag == false) { if (supplyDelta_ < 0) { lag = findBreakpoint(supplyDeltaAbs, lowerLagBreakpoints); } else { lag = findBreakpoint(supplyDeltaAbs, upperLagBreakpoints); } if (lag != 0) { return lag; } } if (supplyDelta_ < 0) { emit LogUsingDefaultRebaseLag( defaultNegativeRebaseLag.toInt256Safe() ); return defaultNegativeRebaseLag.toInt256Safe(); } else { emit LogUsingDefaultRebaseLag( defaultPositiveRebaseLag.toInt256Safe() ); return defaultPositiveRebaseLag.toInt256Safe(); } } function findBreakpoint(int256 supplyDelta, LagBreakpoint[] memory array) internal returns (int256) { LagBreakpoint memory instance; for (uint256 index = 0; index < array.length; index = index.add(1)) { instance = array[index]; if (supplyDelta < instance.lowerDelta) { //Gab in break points found break; } if (supplyDelta <= instance.upperDelta) { emit LogSelectedBreakpoint( instance.lowerDelta, instance.upperDelta, instance.lag ); return instance.lag; } } return 0; } /** * @notice Sets the default rebase lag parameter. It is used to dampen the applied supply adjustment by 1 / rebaseLag. If the rebase lag R, equals 1, the smallest value for R, then the full supply correction is applied on each rebase cycle. If it is greater than 1, then a correction of 1/R of is applied on each rebase. This lag will be used if the default rebase flag is set or if the rebase breakpoint array's are empty. * @param defaultPositiveRebaseLag_ The new positive rebase lag parameter. * @param defaultNegativeRebaseLag_ The new negative rebase lag parameter. */ function setDefaultRebaseLags( uint256 defaultPositiveRebaseLag_, uint256 defaultNegativeRebaseLag_ ) external onlyOwner { require( defaultPositiveRebaseLag_ > 0 && defaultNegativeRebaseLag_ > 0, "Lag must be greater than zero" ); defaultPositiveRebaseLag = defaultPositiveRebaseLag_; defaultNegativeRebaseLag = defaultNegativeRebaseLag_; emit LogSetDefaultRebaseLag( defaultPositiveRebaseLag, defaultNegativeRebaseLag ); } /** * @notice Function used to set if the default rebase flag will be used. * @param useDefaultRebaseLag_ Sets default rebase lag flag. */ function setUseDefaultRebaseLag(bool useDefaultRebaseLag_) external onlyOwner { useDefaultRebaseLag = useDefaultRebaseLag_; emit LogSetUseDefaultRebaseLag(useDefaultRebaseLag); } /** * @notice Adds new rebase lag parameters into either the upper or lower lag breakpoints. This allows the configuration of custom lag parameters * based upon the current range the supply delta is within in. Along with this the two seperate lag breakpoint arrays allows of configuration for * positive and negative supply delta ranges. * @param select Flag to select whether the new breakpoint should go in the upper or lower lag breakpoint. * @param lowerDelta_ The lower range in which the delta can be in. * @param upperDelta_ The upper range in which the delta can be in. * @param lag_ The lag to use in a given range. */ function addNewLagBreakpoint( bool select, int256 lowerDelta_, int256 upperDelta_, int256 lag_ ) public onlyOwner { require( lowerDelta_ >= 0 && lowerDelta_ < upperDelta_, "Lower delta must be less than upper delta" ); require(lag_ > 0, "Lag can't be zero"); LagBreakpoint memory newPoint = LagBreakpoint( lowerDelta_, upperDelta_, lag_ ); LagBreakpoint memory lastPoint; uint256 length; if (select) { length = upperLagBreakpoints.length; if (length > 0) { lastPoint = upperLagBreakpoints[length.sub(1)]; require(lastPoint.upperDelta <= lowerDelta_); } upperLagBreakpoints.push(newPoint); } else { length = lowerLagBreakpoints.length; if (length > 0) { lastPoint = lowerLagBreakpoints[length.sub(1)]; require(lastPoint.upperDelta <= lowerDelta_); } lowerLagBreakpoints.push(newPoint); } emit LogNewLagBreakpoint(select, lowerDelta_, upperDelta_, lag_); } /** * @notice Updates lag breakpoint at a the specified index with new delta range parameters and lag. * @param select Flag to select whether the new breakpoint should go in the upper or lower lag breakpoint. * @param index The index of the selected breakpoint. * @param lowerDelta_ The lower range in which the delta can be in. * @param upperDelta_ The upper range in which the delta can be in. * @param lag_ The lag to use in a given range. */ function updateLagBreakpoint( bool select, uint256 index, int256 lowerDelta_, int256 upperDelta_, int256 lag_ ) public onlyOwner { LagBreakpoint storage instance; require( lowerDelta_ >= 0 && lowerDelta_ < upperDelta_, "Lower delta must be less than upper delta" ); require(lag_ > 0, "Lag can't be zero"); if (select) { withinPointRange( index, lowerDelta_, upperDelta_, upperLagBreakpoints ); instance = upperLagBreakpoints[index]; } else { withinPointRange( index, lowerDelta_, upperDelta_, lowerLagBreakpoints ); instance = lowerLagBreakpoints[index]; } instance.lowerDelta = lowerDelta_; instance.upperDelta = upperDelta_; instance.lag = lag_; emit LogUpdateBreakpoint(select, lowerDelta_, upperDelta_, lag_); } function withinPointRange( uint256 index, int256 lowerDelta_, int256 upperDelta_, LagBreakpoint[] memory array ) internal pure { uint256 length = array.length; require(length > 0, "Can't update empty breakpoint array"); require(index <= length.sub(1), "Index higher than elements avaiable"); LagBreakpoint memory lowerPoint; LagBreakpoint memory upperPoint; if (index == 0) { if (length == 1) { return; } upperPoint = array[index.add(1)]; require(upperDelta_ <= upperPoint.lowerDelta); } else if (index == length.sub(1)) { lowerPoint = array[index.sub(1)]; require(lowerDelta_ >= lowerPoint.upperDelta); } else { upperPoint = array[index.add(1)]; lowerPoint = array[index.sub(1)]; require( lowerDelta_ >= lowerPoint.upperDelta && upperDelta_ <= upperPoint.lowerDelta ); } } /** * @notice Delete lag breakpoint from the end of either upper and lower breakpoint array. * @param select Whether to delete from upper or lower breakpoint array. */ function deleteLagBreakpoint(bool select) public onlyOwner { LagBreakpoint memory instanceToDelete; if (select) { require( upperLagBreakpoints.length > 0, "Can't delete empty breakpoint array" ); instanceToDelete = upperLagBreakpoints[upperLagBreakpoints .length .sub(1)]; upperLagBreakpoints.pop(); } else { require( lowerLagBreakpoints.length > 0, "Can't delete empty breakpoint array" ); instanceToDelete = lowerLagBreakpoints[lowerLagBreakpoints .length .sub(1)]; lowerLagBreakpoints.pop(); } emit LogDeleteBreakpoint( select, instanceToDelete.lowerDelta, instanceToDelete.upperDelta, instanceToDelete.lag ); delete instanceToDelete; } /** * @notice Sets the deviation threshold fraction. If the exchange rate given by the market * oracle is within this fractional distance from the targetRate, then no supply * modifications are made. DECIMALS fixed point number. * @param upperDeviationThreshold_ The new exchange rate threshold fraction. * @param lowerDeviationThreshold_ The new exchange rate threshold fraction. */ function setDeviationThresholds( uint256 upperDeviationThreshold_, uint256 lowerDeviationThreshold_ ) external onlyOwner { upperDeviationThreshold = upperDeviationThreshold_; lowerDeviationThreshold = lowerDeviationThreshold_; emit LogSetDeviationThreshold( upperDeviationThreshold, lowerDeviationThreshold ); } /** * @notice Sets the parameters which control the timing and frequency of * rebase operations. * a) the minimum time period that must elapse between rebase cycles. * b) the rebase window offset parameter. * c) the rebase window length parameter. * @param minRebaseTimeIntervalSec_ More than this much time must pass between rebase * operations, in seconds. * @param rebaseWindowOffsetSec_ The number of seconds from the beginning of the rebase interval, where the rebase window begins. * @param rebaseWindowLengthSec_ The length of the rebase window in seconds. */ function setRebaseTimingParameters( uint256 minRebaseTimeIntervalSec_, uint256 rebaseWindowOffsetSec_, uint256 rebaseWindowLengthSec_ ) external onlyOwner { require(minRebaseTimeIntervalSec_ > 0); require(rebaseWindowOffsetSec_ < minRebaseTimeIntervalSec_); minRebaseTimeIntervalSec = minRebaseTimeIntervalSec_; rebaseWindowOffsetSec = rebaseWindowOffsetSec_; rebaseWindowLengthSec = rebaseWindowLengthSec_; emit LogSetRebaseTimingParameters( minRebaseTimeIntervalSec_, rebaseWindowOffsetSec_, rebaseWindowLengthSec_ ); } /** * @return If the latest block timestamp is within the rebase time window it, returns true. * Otherwise, returns false. */ function inRebaseWindow() public view returns (bool) { return (now.mod(minRebaseTimeIntervalSec) >= rebaseWindowOffsetSec && now.mod(minRebaseTimeIntervalSec) < (rebaseWindowOffsetSec.add(rebaseWindowLengthSec))); } /** * @return Computes the total supply adjustment in response to the exchange rate * and the targetRate. */ function computeSupplyDelta(uint256 rate, uint256 targetRate) private view returns (int256) { if (withinDeviationThreshold(rate, targetRate)) { return 0; } // supplyDelta = totalSupply * (rate - targetRate) / targetRate int256 targetRateSigned = targetRate.toInt256Safe(); return debase .totalSupply() .toInt256Safe() .mul(rate.toInt256Safe().sub(targetRateSigned)) .div(targetRateSigned); } /** * @notice Function to determine if a rate is within the upper or lower deviation from the target rate. * @param rate The current exchange rate, an 18 decimal fixed point number. * @param targetRate The target exchange rate, an 18 decimal fixed point number. * @return If the rate is within the upper or lower deviation threshold from the target rate, returns true. * Otherwise, returns false. */ function withinDeviationThreshold(uint256 rate, uint256 targetRate) private view returns (bool) { uint256 upperThreshold = targetRate.mul(upperDeviationThreshold).div( 10**DECIMALS ); uint256 lowerThreshold = targetRate.mul(lowerDeviationThreshold).div( 10**DECIMALS ); return (rate >= targetRate && rate.sub(targetRate) < upperThreshold) || (rate < targetRate && targetRate.sub(rate) < lowerThreshold); } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; pragma experimental ABIEncoderV2; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of decimals of the tokens. */ function decimals() external view returns (uint8); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval( address indexed owner, address indexed spender, uint256 value ); } /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies in extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require( address(this).balance >= amount, "Address: insufficient balance" ); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{value: amount}(""); require( success, "Address: unable to send value, recipient may have reverted" ); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return _functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue( target, data, value, "Address: low-level call with value failed" ); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require( address(this).balance >= value, "Address: insufficient balance for call" ); return _functionCallWithValue(target, data, value, errorMessage); } function _functionCallWithValue( address target, bytes memory data, uint256 weiValue, string memory errorMessage ) private returns (bytes memory) { require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{value: weiValue}( data ); if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin guidelines: functions revert instead * of returning `false` on failure. This behavior is nonetheless conventional * and does not conflict with the expectations of ERC20 applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20 { using SafeMath for uint256; using Address for address; mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; /** * @dev Sets the values for {name} and {symbol}, initializes {decimals} with * a default value of 18. * * To select a different value for {decimals}, use {_setupDecimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor( string memory name, string memory symbol, uint8 decimals ) public { _name = name; _symbol = symbol; _decimals = decimals; } /** * @dev Returns the name of the token. */ function name() public view returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5,05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is * called. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public override view returns (uint8) { return _decimals; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public virtual override view returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public virtual override view returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public virtual override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public virtual override view returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}; * * Requirements: * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for ``sender``'s tokens of at least * `amount`. */ function transferFrom( address sender, address recipient, uint256 amount ) public virtual override returns (bool) { _transfer(sender, recipient, amount); _approve( sender, _msgSender(), _allowances[sender][_msgSender()].sub( amount, "ERC20: transfer amount exceeds allowance" ) ); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue) ); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { _approve( _msgSender(), spender, _allowances[_msgSender()][spender].sub( subtractedValue, "ERC20: decreased allowance below zero" ) ); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer( address sender, address recipient, uint256 amount ) internal virtual { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(sender, recipient, amount); _balances[sender] = _balances[sender].sub( amount, "ERC20: transfer amount exceeds balance" ); _balances[recipient] = _balances[recipient].add(amount); emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply = _totalSupply.add(amount); _balances[account] = _balances[account].add(amount); emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); _balances[account] = _balances[account].sub( amount, "ERC20: burn amount exceeds balance" ); _totalSupply = _totalSupply.sub(amount); emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens. * * This is internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve( address owner, address spender, uint256 amount ) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Sets {decimals} to a value other than the default one of 18. * * WARNING: This function should only be called from the constructor. Most * applications that interact with token contracts will not expect * {decimals} to ever change, and may work incorrectly if it does. */ function _setupDecimals(uint8 decimals_) internal { _decimals = decimals_; } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be to transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer( address from, address to, uint256 amount ) internal virtual {} } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } contract Degov is ERC20, Ownable, Initializable { using SafeMath for uint256; uint256 private constant DECIMALS = 18; /// @notice A record of each accounts delegate mapping(address => address) public delegates; /// @notice A checkpoint for marking number of votes from a given block struct Checkpoint { uint32 fromBlock; uint256 votes; } /// @notice A record of votes checkpoints for each account, by index mapping(address => mapping(uint32 => Checkpoint)) public checkpoints; /// @notice The number of checkpoints for each account mapping(address => uint32) public numCheckpoints; /// @notice The EIP-712 typehash for the contract's domain bytes32 public constant DOMAIN_TYPEHASH = keccak256( "EIP712Domain(string name,uint256 chainId,address verifyingContract)" ); /// @notice The EIP-712 typehash for the delegation struct used by the contract bytes32 public constant DELEGATION_TYPEHASH = keccak256( "Delegation(address delegatee,uint256 nonce,uint256 expiry)" ); /// @notice A record of states for signing / validating signatures mapping(address => uint256) public nonces; /// @notice An event thats emitted when an account changes its delegate event DelegateChanged( address indexed delegator_, address indexed fromDelegate_, address indexed toDelegate_ ); /// @notice An event thats emitted when a delegate account's vote balance changes event DelegateVotesChanged( address indexed delegate_, uint256 previousBalance_, uint256 newBalance_ ); //The threshold of the total token supply required in order to pass a proposal uint256 public quorumThreshold = 20; //The threshold of the total token supply required in order to propose a proposal uint256 public proposalThreshold = 1; uint256 public constant TOTAL_SUPPLY = 25000 * 10**DECIMALS; event LogSetQuorumThresholdRatio(uint256 quorumThreshold_); event LogSetProposalThresholdRatio(uint256 proposalThreshold_); constructor() public ERC20("Degov", "DEGOV", uint8(DECIMALS)) {} /** * @notice Initialize the token with policy address and pool for the token distribution * @param degovDaiLpPool_ Address of the pool contract where newly minted degov tokens are sent. */ function initialize(address degovDaiLpPool_) external initializer { _mint(degovDaiLpPool_, TOTAL_SUPPLY); } /** * @notice Sets the quorum threshold threshold for proposal voting. Used to calculate the % of the total supply required in order for a vote on a proposal to pass * @param quorumThreshold_ The new quorum threshold threshold. */ function setQuorumThresholdRatio(uint256 quorumThreshold_) external onlyOwner { require( quorumThreshold_ > 0 && quorumThreshold <= 100, "Quorum threshold must be greater than zero and less/equal to 100" ); require( quorumThreshold_ >= proposalThreshold, "Quorum threshold must be great or equal too proposal threshold" ); quorumThreshold = quorumThreshold_; emit LogSetQuorumThresholdRatio(quorumThreshold_); } /** * @notice Sets the proposal threshold threshold for proposal voting. Used to calculate the % of the total supply required in order for a proposal to be initiated. * @param proposalThreshold_ The new proposal threshold threshold. */ function setProposalThresholdRatio(uint256 proposalThreshold_) external onlyOwner { require( proposalThreshold_ > 0 && proposalThreshold_ <= 100, "Proposal threshold must be greater than zero and less/equal to 100" ); require( proposalThreshold_ <= quorumThreshold, "Proposal threshold must be great or equal too quorum threshold" ); proposalThreshold = proposalThreshold_; emit LogSetProposalThresholdRatio(proposalThreshold_); } /** * @notice Delegate votes from `msg.sender` to `delegatee` * @param delegatee The address to delegate votes to */ function delegate(address delegatee) public { return _delegate(msg.sender, delegatee); } function transfer(address recipient, uint256 amount) public override returns (bool) { super.transfer(recipient, amount); _moveDelegates(delegates[msg.sender], delegates[recipient], amount); return true; } function transferFrom( address sender, address recipient, uint256 amount ) public override returns (bool) { super.transferFrom(sender, recipient, amount); _moveDelegates(delegates[sender], delegates[recipient], amount); return true; } /** * @notice Delegates votes from signatory to `delegatee` * @param delegatee The address to delegate votes to * @param nonce The contract state required to match the signature * @param expiry The time at which to expire the signature * @param v The recovery byte of the signature * @param r Half of the ECDSA signature pair * @param s Half of the ECDSA signature pair */ function delegateBySig( address delegatee, uint256 nonce, uint256 expiry, uint8 v, bytes32 r, bytes32 s ) public { bytes32 domainSeparator = keccak256( abi.encode( DOMAIN_TYPEHASH, keccak256(bytes(name())), getChainId(), address(this) ) ); bytes32 structHash = keccak256( abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry) ); bytes32 digest = keccak256( abi.encodePacked("\x19\x01", domainSeparator, structHash) ); address signatory = ecrecover(digest, v, r, s); require( signatory != address(0), "Degov::delegateBySig: invalid signature" ); require( nonce == nonces[signatory]++, "Degov::delegateBySig: invalid nonce" ); require(now <= expiry, "Degov::delegateBySig: signature expired"); return _delegate(signatory, delegatee); } /** * @notice Gets the current votes balance for `account` * @param account The address to get votes balance * @return The number of current votes for `account` */ function getCurrentVotes(address account) external view returns (uint256) { uint32 nCheckpoints = numCheckpoints[account]; return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0; } /** * @notice Determine the prior number of votes for an account as of a block number * @dev Block number must be a finalized block or else this function will revert to prevent misinformation. * @param account The address of the account to check * @param blockNumber The block number to get the vote balance at * @return The number of votes the account had as of the given block */ function getPriorVotes(address account, uint256 blockNumber) public view returns (uint256) { require( blockNumber < block.number, "Degov::getPriorVotes: not yet determined" ); uint32 nCheckpoints = numCheckpoints[account]; if (nCheckpoints == 0) { return 0; } // First check most recent balance if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) { return checkpoints[account][nCheckpoints - 1].votes; } // Next check implicit zero balance if (checkpoints[account][0].fromBlock > blockNumber) { return 0; } uint32 lower = 0; uint32 upper = nCheckpoints - 1; while (upper > lower) { uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow Checkpoint memory cp = checkpoints[account][center]; if (cp.fromBlock == blockNumber) { return cp.votes; } else if (cp.fromBlock < blockNumber) { lower = center; } else { upper = center - 1; } } return checkpoints[account][lower].votes; } function _delegate(address delegator, address delegatee) internal { address currentDelegate = delegates[delegator]; uint256 delegatorBalance = balanceOf(delegator); delegates[delegator] = delegatee; emit DelegateChanged(delegator, currentDelegate, delegatee); _moveDelegates(currentDelegate, delegatee, delegatorBalance); } function _moveDelegates( address srcRep, address dstRep, uint256 amount ) internal { if (srcRep != dstRep && amount > 0) { if (srcRep != address(0)) { uint32 srcRepNum = numCheckpoints[srcRep]; uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0; uint256 srcRepNew = srcRepOld.sub(amount); _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew); } if (dstRep != address(0)) { uint32 dstRepNum = numCheckpoints[dstRep]; uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0; uint256 dstRepNew = dstRepOld.add(amount); _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew); } } } function _writeCheckpoint( address delegatee, uint32 nCheckpoints, uint256 oldVotes, uint256 newVotes ) internal { uint32 blockNumber = safe32( block.number, "Degov::_writeCheckpoint: block number exceeds 32 bits" ); if ( nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber ) { checkpoints[delegatee][nCheckpoints - 1].votes = newVotes; } else { checkpoints[delegatee][nCheckpoints] = Checkpoint( blockNumber, newVotes ); numCheckpoints[delegatee] = nCheckpoints + 1; } emit DelegateVotesChanged(delegatee, oldVotes, newVotes); } function safe32(uint256 n, string memory errorMessage) internal pure returns (uint32) { require(n < 2**32, errorMessage); return uint32(n); } function getChainId() internal pure returns (uint256) { uint256 chainId; assembly { chainId := chainid() } return chainId; } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; pragma experimental ABIEncoderV2; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } contract Timelock is Initializable, Ownable { using SafeMath for uint256; event NewAdmin(address indexed newAdmin_); event NewPendingAdmin(address indexed newPendingAdmin_); event NewDelay(uint256 indexed newDelay_); event NewGracePeriod(uint256 indexed newGracePerios_); event CancelTransaction( bytes32 indexed txHash_, address indexed target_, uint256 value_, string signature_, bytes data_, uint256 eta_ ); event ExecuteTransaction( bytes32 indexed txHash_, address indexed target_, uint256 value_, string signature_, bytes data_, uint256 eta_ ); event QueueTransaction( bytes32 indexed txHash_, address indexed target_, uint256 value_, string signature_, bytes data_, uint256 eta_ ); address public admin; address public pendingAdmin; // The amount of delay after which a delay can a queued can be executed. uint256 public delay = 1 days; // The the period within which an queued proposal can be executed. uint256 public gracePeriod = 7 days; mapping(bytes32 => bool) public queuedTransactions; /** * @notice Initializes timelock contract with the address of the governor/admin * @param admin_ Address of the timelock admin. */ function initialize(address admin_) external onlyOwner initializer { admin = admin_; } receive() external payable {} /** * @notice Sets the amount of time after which a proposal that has been queued can be executed. * @param delay_ The amount of delay to set. */ function setDelay(uint256 delay_) public onlyOwner { require( delay_ >= 0 && delay_ < gracePeriod, "Timelock::setDelay: Delay must not be greater equal to zero and less than gracePeriod" ); delay = delay_; emit NewDelay(delay); } /** * @notice Sets the amount of time within which a queued proposal can be executed. * @param gracePeriod_ The new grace period to be set. */ function setGracePeriod(uint256 gracePeriod_) public onlyOwner { require( gracePeriod_ > delay, "Timelock::gracePeriod: Grace period must be greater delay" ); gracePeriod = gracePeriod_; emit NewGracePeriod(gracePeriod); } function acceptAdmin() public { require( msg.sender == pendingAdmin, "Timelock::acceptAdmin: Call must come from pendingAdmin." ); admin = msg.sender; pendingAdmin = address(0); emit NewAdmin(admin); } function setPendingAdmin(address pendingAdmin_) public onlyOwner { pendingAdmin = pendingAdmin_; emit NewPendingAdmin(pendingAdmin); } function queueTransaction( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) public returns (bytes32) { require( msg.sender == admin, "Timelock::queueTransaction: Call must come from admin." ); require( eta >= getBlockTimestamp().add(delay), "Timelock::queueTransaction: Estimated execution block must satisfy delay." ); bytes32 txHash = keccak256( abi.encode(target, value, signature, data, eta) ); queuedTransactions[txHash] = true; emit QueueTransaction(txHash, target, value, signature, data, eta); return txHash; } function cancelTransaction( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) public { require( msg.sender == admin, "Timelock::cancelTransaction: Call must come from admin." ); bytes32 txHash = keccak256( abi.encode(target, value, signature, data, eta) ); queuedTransactions[txHash] = false; emit CancelTransaction(txHash, target, value, signature, data, eta); } function executeTransaction( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) public payable returns (bytes memory) { require( msg.sender == admin, "Timelock::executeTransaction: Call must come from admin." ); bytes32 txHash = keccak256( abi.encode(target, value, signature, data, eta) ); require( queuedTransactions[txHash], "Timelock::executeTransaction: Transaction hasn't been queued." ); require( getBlockTimestamp() >= eta, "Timelock::executeTransaction: Transaction hasn't surpassed time lock." ); require( getBlockTimestamp() <= eta.add(gracePeriod), "Timelock::executeTransaction: Transaction is stale." ); queuedTransactions[txHash] = false; bytes memory callData; if (bytes(signature).length == 0) { callData = data; } else { callData = abi.encodePacked( bytes4(keccak256(bytes(signature))), data ); } // solium-disable-next-line security/no-call-value (bool success, bytes memory returnData) = target.call{value: value}( callData ); require( success, "Timelock::executeTransaction: Transaction execution reverted." ); emit ExecuteTransaction(txHash, target, value, signature, data, eta); return returnData; } function getBlockTimestamp() internal view returns (uint256) { // solium-disable-next-line security/no-block-members return block.timestamp; } } interface DegovI { function totalSupply() external view returns (uint256); function quorumThreshold() external view returns (uint256); function proposalThreshold() external view returns (uint256); function getPriorVotes(address account, uint256 blockNumber) external returns (uint256); } contract GovernorAlpha is Initializable, Ownable { using SafeMath for uint256; /// @notice The name of this contract string public constant name = "Degov Governor Alpha"; /// @notice The number of votes in support of a proposal required in order for a quorum to be reached and for a vote to succeed function quorumVotes() public view returns (uint256) { return (degov.totalSupply().mul(degov.quorumThreshold())).div(100); } /// @notice The number of votes required in order for a voter to become a proposer function proposalThreshold() public view returns (uint256) { return (degov.totalSupply().mul(degov.proposalThreshold())).div(100); } /// @notice The maximum number of actions that can be included in a proposal function proposalMaxOperations() public pure returns (uint256) { return 10; } // 10 actions /// @notice The delay before voting on a proposal may take place, once proposed uint256 public votingDelay = 1; /// @notice The duration of voting on a proposal uint256 public votingPeriod = 1 days; /// @notice The address of the Compound Protocol Timelock Timelock public timelock; /// @notice The address of the Compound governance token DegovI public degov; /// @notice The address of the Governor Guardian address public guardian; /// @notice The total number of proposals uint256 public proposalCount; struct Proposal { /// @notice Unique id for looking up a proposal uint256 id; /// @notice Creator of the proposal address proposer; /// @notice The timestamp that the proposal will be available for execution, set once the vote succeeds uint256 eta; /// @notice the ordered list of target addresses for calls to be made address[] targets; /// @notice The ordered list of values (i.e. msg.value) to be passed to the calls to be made uint256[] values; /// @notice The ordered list of function signatures to be called string[] signatures; /// @notice The ordered list of calldata to be passed to each call bytes[] calldatas; /// @notice The block at which voting begins: holders must delegate their votes prior to this block uint256 startBlock; /// @notice The block at which voting ends: votes must be cast prior to this block uint256 endBlock; /// @notice Current number of votes in favor of this proposal uint256 forVotes; /// @notice Current number of votes in opposition to this proposal uint256 againstVotes; /// @notice Flag marking whether the proposal has been canceled bool canceled; /// @notice Flag marking whether the proposal has been executed bool executed; /// @notice Receipts of ballots for the entire set of voters mapping(address => Receipt) receipts; } /// @notice Ballot receipt record for a voter struct Receipt { /// @notice Whether or not a vote has been cast bool hasVoted; /// @notice Whether or not the voter supports the proposal bool support; /// @notice The number of votes the voter had, which were cast uint256 votes; } /// @notice Possible states that a proposal may be in enum ProposalState { Pending, Active, Canceled, Defeated, Succeeded, Queued, Expired, Executed } /// @notice The official record of all proposals ever proposed mapping(uint256 => Proposal) public proposals; /// @notice The latest proposal for each proposer mapping(address => uint256) public latestProposalIds; /// @notice The EIP-712 typehash for the contract's domain bytes32 public constant DOMAIN_TYPEHASH = keccak256( "EIP712Domain(string name,uint256 chainId,address verifyingContract)" ); /// @notice The EIP-712 typehash for the ballot struct used by the contract bytes32 public constant BALLOT_TYPEHASH = keccak256( "Ballot(uint256 proposalId,bool support)" ); /// @notice An event emitted when a new proposal is created event ProposalCreated( uint256 id_, address proposer_, address[] targets_, uint256[] values_, string[] signatures_, bytes[] calldatas_, uint256 startBlock_, uint256 endBlock_, string description_ ); /// @notice An event emitted when a vote has been cast on a proposal event VoteCast( address voter_, uint256 proposalId_, bool support_, uint256 votes_ ); event SetVotingPeriod(uint256 indexed votingPeriod_); event SetVotingDelay(uint256 indexed votingDelay_); /// @notice An event emitted when a proposal has been canceled event ProposalCanceled(uint256 id_); /// @notice An event emitted when a proposal has been queued in the Timelock event ProposalQueued(uint256 id_, uint256 eta_); /// @notice An event emitted when a proposal has been executed in the Timelock event ProposalExecuted(uint256 id_); /** * @notice Function to set the delay before voting on a proposal may take place, once proposed. * @param votingDelay_ The new voting delay */ function setVotingDelay(uint256 votingDelay_) external onlyOwner { require(votingDelay_ > 0); votingDelay = votingDelay_; emit SetVotingDelay(votingDelay_); } /** * @notice Function to set the duration of voting on a proposal. * @param votingPeriod_ The new voting period */ function setVotingPeriod(uint256 votingPeriod_) external onlyOwner { require(votingPeriod_ > 0); votingPeriod = votingPeriod_; emit SetVotingPeriod(votingPeriod_); } /** * @notice Initializes governor function with the address of the timelock,degov contracts and guardian of the governor contract * @param timelock_ Address of the timelock contract * @param degov_ Address of the degov token */ function initialize(Timelock timelock_, address degov_) external onlyOwner initializer { timelock = timelock_; degov = DegovI(degov_); guardian = msg.sender; } function propose( address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas, string memory description ) public returns (uint256) { require( degov.getPriorVotes(msg.sender, block.number.sub(1)) > proposalThreshold(), "GovernorAlpha::propose: proposer votes below proposal threshold" ); require( targets.length == values.length && targets.length == signatures.length && targets.length == calldatas.length, "GovernorAlpha::propose: proposal function information arity mismatch" ); require( targets.length != 0, "GovernorAlpha::propose: must provide actions" ); require( targets.length <= proposalMaxOperations(), "GovernorAlpha::propose: too many actions" ); uint256 latestProposalId = latestProposalIds[msg.sender]; if (latestProposalId != 0) { ProposalState proposersLatestProposalState = state( latestProposalId ); require( proposersLatestProposalState != ProposalState.Active, "GovernorAlpha::propose: one live proposal per proposer, found an already active proposal" ); require( proposersLatestProposalState != ProposalState.Pending, "GovernorAlpha::propose: one live proposal per proposer, found an already pending proposal" ); } uint256 startBlock = block.number.add(votingDelay); uint256 endBlock = startBlock.add(votingPeriod); proposalCount++; Proposal memory newProposal = Proposal({ id: proposalCount, proposer: msg.sender, eta: 0, targets: targets, values: values, signatures: signatures, calldatas: calldatas, startBlock: startBlock, endBlock: endBlock, forVotes: 0, againstVotes: 0, canceled: false, executed: false }); proposals[newProposal.id] = newProposal; latestProposalIds[newProposal.proposer] = newProposal.id; emit ProposalCreated( newProposal.id, msg.sender, targets, values, signatures, calldatas, startBlock, endBlock, description ); return newProposal.id; } function queue(uint256 proposalId) public { require( state(proposalId) == ProposalState.Succeeded, "GovernorAlpha::queue: proposal can only be queued if it is succeeded" ); Proposal storage proposal = proposals[proposalId]; uint256 eta = block.timestamp.add(timelock.delay()); for (uint256 i = 0; i < proposal.targets.length; i++) { _queueOrRevert( proposal.targets[i], proposal.values[i], proposal.signatures[i], proposal.calldatas[i], eta ); } proposal.eta = eta; emit ProposalQueued(proposalId, eta); } function _queueOrRevert( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) internal { require( !timelock.queuedTransactions( keccak256(abi.encode(target, value, signature, data, eta)) ), "GovernorAlpha::_queueOrRevert: proposal action already queued at eta" ); timelock.queueTransaction(target, value, signature, data, eta); } function execute(uint256 proposalId) public payable { require( state(proposalId) == ProposalState.Queued, "GovernorAlpha::execute: proposal can only be executed if it is queued" ); Proposal storage proposal = proposals[proposalId]; proposal.executed = true; for (uint256 i = 0; i < proposal.targets.length; i++) { timelock.executeTransaction{value: proposal.values[i]}( proposal.targets[i], proposal.values[i], proposal.signatures[i], proposal.calldatas[i], proposal.eta ); } emit ProposalExecuted(proposalId); } function cancel(uint256 proposalId) public { ProposalState state = state(proposalId); require( state != ProposalState.Executed, "GovernorAlpha::cancel: cannot cancel executed proposal" ); Proposal storage proposal = proposals[proposalId]; require( msg.sender == guardian || degov.getPriorVotes(proposal.proposer, block.number.sub(1)) < proposalThreshold(), "GovernorAlpha::cancel: proposer above threshold" ); proposal.canceled = true; for (uint256 i = 0; i < proposal.targets.length; i++) { timelock.cancelTransaction( proposal.targets[i], proposal.values[i], proposal.signatures[i], proposal.calldatas[i], proposal.eta ); } emit ProposalCanceled(proposalId); } function getActions(uint256 proposalId) public view returns ( address[] memory targets, uint256[] memory values, string[] memory signatures, bytes[] memory calldatas ) { Proposal storage p = proposals[proposalId]; return (p.targets, p.values, p.signatures, p.calldatas); } function getReceipt(uint256 proposalId, address voter) public view returns (Receipt memory) { return proposals[proposalId].receipts[voter]; } function state(uint256 proposalId) public view returns (ProposalState) { require( proposalCount >= proposalId && proposalId > 0, "GovernorAlpha::state: invalid proposal id" ); Proposal storage proposal = proposals[proposalId]; if (proposal.canceled) { return ProposalState.Canceled; } else if (block.number <= proposal.startBlock) { return ProposalState.Pending; } else if (block.number <= proposal.endBlock) { return ProposalState.Active; } else if ( proposal.forVotes <= proposal.againstVotes || proposal.forVotes < quorumVotes() ) { return ProposalState.Defeated; } else if (proposal.eta == 0) { return ProposalState.Succeeded; } else if (proposal.executed) { return ProposalState.Executed; } else if ( block.timestamp >= proposal.eta.add(timelock.gracePeriod()) ) { return ProposalState.Expired; } else { return ProposalState.Queued; } } function castVote(uint256 proposalId, bool support) public { return _castVote(msg.sender, proposalId, support); } function castVoteBySig( uint256 proposalId, bool support, uint8 v, bytes32 r, bytes32 s ) public { bytes32 domainSeparator = keccak256( abi.encode( DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this) ) ); bytes32 structHash = keccak256( abi.encode(BALLOT_TYPEHASH, proposalId, support) ); bytes32 digest = keccak256( abi.encodePacked("\x19\x01", domainSeparator, structHash) ); address signatory = ecrecover(digest, v, r, s); require( signatory != address(0), "GovernorAlpha::castVoteBySig: invalid signature" ); return _castVote(signatory, proposalId, support); } function _castVote( address voter, uint256 proposalId, bool support ) internal { require( state(proposalId) == ProposalState.Active, "GovernorAlpha::_castVote: voting is closed" ); Proposal storage proposal = proposals[proposalId]; Receipt storage receipt = proposal.receipts[voter]; require( receipt.hasVoted == false, "GovernorAlpha::_castVote: voter already voted" ); uint256 votes = degov.getPriorVotes(voter, proposal.startBlock); if (support) { proposal.forVotes = proposal.forVotes.add(votes); } else { proposal.againstVotes = proposal.againstVotes.add(votes); } receipt.hasVoted = true; receipt.support = support; receipt.votes = votes; emit VoteCast(voter, proposalId, support, votes); } function __acceptAdmin() public { require( msg.sender == guardian, "GovernorAlpha::__acceptAdmin: sender must be gov guardian" ); timelock.acceptAdmin(); } function __abdicate() public { require( msg.sender == guardian, "GovernorAlpha::__abdicate: sender must be gov guardian" ); guardian = address(0); } function __queueSetTimelockPendingAdmin( address newPendingAdmin, uint256 eta ) public { require( msg.sender == guardian, "GovernorAlpha::__queueSetTimelockPendingAdmin: sender must be gov guardian" ); timelock.queueTransaction( address(timelock), 0, "setPendingAdmin(address)", abi.encode(newPendingAdmin), eta ); } function __executeSetTimelockPendingAdmin( address newPendingAdmin, uint256 eta ) public { require( msg.sender == guardian, "GovernorAlpha::__executeSetTimelockPendingAdmin: sender must be gov guardian" ); timelock.executeTransaction( address(timelock), 0, "setPendingAdmin(address)", abi.encode(newPendingAdmin), eta ); } function getChainId() internal pure returns (uint256) { uint256 chainId; assembly { chainId := chainid() } return chainId; } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } interface IUniswapV2Factory { event PairCreated( address indexed token0, address indexed token1, address pair, uint256 ); function feeTo() external view returns (address); function feeToSetter() external view returns (address); function getPair(address tokenA, address tokenB) external view returns (address pair); function allPairs(uint256) external view returns (address pair); function allPairsLength() external view returns (uint256); function createPair(address tokenA, address tokenB) external returns (address pair); function setFeeTo(address) external; function setFeeToSetter(address) external; } interface IUniswapV2Pair { event Approval( address indexed owner, address indexed spender, uint256 value ); event Transfer(address indexed from, address indexed to, uint256 value); function name() external pure returns (string memory); function symbol() external pure returns (string memory); function decimals() external pure returns (uint8); function totalSupply() external view returns (uint256); function balanceOf(address owner) external view returns (uint256); function allowance(address owner, address spender) external view returns (uint256); function approve(address spender, uint256 value) external returns (bool); function transfer(address to, uint256 value) external returns (bool); function transferFrom( address from, address to, uint256 value ) external returns (bool); function DOMAIN_SEPARATOR() external view returns (bytes32); function PERMIT_TYPEHASH() external pure returns (bytes32); function nonces(address owner) external view returns (uint256); function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; event Mint(address indexed sender, uint256 amount0, uint256 amount1); event Burn( address indexed sender, uint256 amount0, uint256 amount1, address indexed to ); event Swap( address indexed sender, uint256 amount0In, uint256 amount1In, uint256 amount0Out, uint256 amount1Out, address indexed to ); event Sync(uint112 reserve0, uint112 reserve1); function MINIMUM_LIQUIDITY() external pure returns (uint256); function factory() external view returns (address); function token0() external view returns (address); function token1() external view returns (address); function getReserves() external view returns ( uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast ); function price0CumulativeLast() external view returns (uint256); function price1CumulativeLast() external view returns (uint256); function kLast() external view returns (uint256); function mint(address to) external returns (uint256 liquidity); function burn(address to) external returns (uint256 amount0, uint256 amount1); function swap( uint256 amount0Out, uint256 amount1Out, address to, bytes calldata data ) external; function skim(address to) external; function sync() external; function initialize(address, address) external; } library Babylonian { function sqrt(uint256 y) internal pure returns (uint256 z) { if (y > 3) { z = y; uint256 x = y / 2 + 1; while (x < z) { z = x; x = (y / x + x) / 2; } } else if (y != 0) { z = 1; } // else z = 0 } } library FixedPoint { // range: [0, 2**112 - 1] // resolution: 1 / 2**112 struct uq112x112 { uint224 _x; } // range: [0, 2**144 - 1] // resolution: 1 / 2**112 struct uq144x112 { uint256 _x; } uint8 private constant RESOLUTION = 112; uint256 private constant Q112 = uint256(1) << RESOLUTION; uint256 private constant Q224 = Q112 << RESOLUTION; // encode a uint112 as a UQ112x112 function encode(uint112 x) internal pure returns (uq112x112 memory) { return uq112x112(uint224(x) << RESOLUTION); } // encodes a uint144 as a UQ144x112 function encode144(uint144 x) internal pure returns (uq144x112 memory) { return uq144x112(uint256(x) << RESOLUTION); } // divide a UQ112x112 by a uint112, returning a UQ112x112 function div(uq112x112 memory self, uint112 x) internal pure returns (uq112x112 memory) { require(x != 0, "FixedPoint: DIV_BY_ZERO"); return uq112x112(self._x / uint224(x)); } // multiply a UQ112x112 by a uint, returning a UQ144x112 // reverts on overflow function mul(uq112x112 memory self, uint256 y) internal pure returns (uq144x112 memory) { uint256 z; require( y == 0 || (z = uint256(self._x) * y) / y == uint256(self._x), "FixedPoint: MULTIPLICATION_OVERFLOW" ); return uq144x112(z); } // returns a UQ112x112 which represents the ratio of the numerator to the denominator // equivalent to encode(numerator).div(denominator) function fraction(uint112 numerator, uint112 denominator) internal pure returns (uq112x112 memory) { require(denominator > 0, "FixedPoint: DIV_BY_ZERO"); return uq112x112((uint224(numerator) << RESOLUTION) / denominator); } // decode a UQ112x112 into a uint112 by truncating after the radix point function decode(uq112x112 memory self) internal pure returns (uint112) { return uint112(self._x >> RESOLUTION); } // decode a UQ144x112 into a uint144 by truncating after the radix point function decode144(uq144x112 memory self) internal pure returns (uint144) { return uint144(self._x >> RESOLUTION); } // take the reciprocal of a UQ112x112 function reciprocal(uq112x112 memory self) internal pure returns (uq112x112 memory) { require(self._x != 0, "FixedPoint: ZERO_RECIPROCAL"); return uq112x112(uint224(Q224 / self._x)); } // square root of a UQ112x112 function sqrt(uq112x112 memory self) internal pure returns (uq112x112 memory) { return uq112x112(uint224(Babylonian.sqrt(uint256(self._x)) << 56)); } } // library with helper methods for oracles that are concerned with computing average prices library UniswapV2OracleLibrary { using FixedPoint for *; // helper function that returns the current block timestamp within the range of uint32, i.e. [0, 2**32 - 1] function currentBlockTimestamp() internal view returns (uint32) { return uint32(block.timestamp % 2**32); } // produces the cumulative price using counterfactuals to save gas and avoid a call to sync. function currentCumulativePrices(address pair) internal view returns ( uint256 price0Cumulative, uint256 price1Cumulative, uint32 blockTimestamp ) { blockTimestamp = currentBlockTimestamp(); price0Cumulative = IUniswapV2Pair(pair).price0CumulativeLast(); price1Cumulative = IUniswapV2Pair(pair).price1CumulativeLast(); // if time has elapsed since the last update on the pair, mock the accumulated price values ( uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast ) = IUniswapV2Pair(pair).getReserves(); if (blockTimestampLast != blockTimestamp) { // subtraction overflow is desired uint32 timeElapsed = blockTimestamp - blockTimestampLast; // addition overflow is desired // counterfactual price0Cumulative += uint256(FixedPoint.fraction(reserve1, reserve0)._x) * timeElapsed; // counterfactual price1Cumulative += uint256(FixedPoint.fraction(reserve0, reserve1)._x) * timeElapsed; } } } library SafeMath { function add(uint256 x, uint256 y) internal pure returns (uint256 z) { require((z = x + y) >= x, "ds-math-add-overflow"); } function sub(uint256 x, uint256 y) internal pure returns (uint256 z) { require((z = x - y) <= x, "ds-math-sub-underflow"); } function mul(uint256 x, uint256 y) internal pure returns (uint256 z) { require(y == 0 || (z = x * y) / y == x, "ds-math-mul-overflow"); } } library UniswapV2Library { using SafeMath for uint256; // returns sorted token addresses, used to handle return values from pairs sorted in this order function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) { require(tokenA != tokenB, "UniswapV2Library: IDENTICAL_ADDRESSES"); (token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA); require(token0 != address(0), "UniswapV2Library: ZERO_ADDRESS"); } // calculates the CREATE2 address for a pair without making any external calls function pairFor( address factory, address tokenA, address tokenB ) internal pure returns (address pair) { (address token0, address token1) = sortTokens(tokenA, tokenB); pair = address( uint256( keccak256( abi.encodePacked( hex"ff", factory, keccak256(abi.encodePacked(token0, token1)), hex"96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f" // init code hash ) ) ) ); } // fetches and sorts the reserves for a pair function getReserves( address factory, address tokenA, address tokenB ) internal view returns (uint256 reserveA, uint256 reserveB) { (address token0, ) = sortTokens(tokenA, tokenB); (uint256 reserve0, uint256 reserve1, ) = IUniswapV2Pair( pairFor(factory, tokenA, tokenB) ) .getReserves(); (reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0); } // given some amount of an asset and pair reserves, returns an equivalent amount of the other asset function quote( uint256 amountA, uint256 reserveA, uint256 reserveB ) internal pure returns (uint256 amountB) { require(amountA > 0, "UniswapV2Library: INSUFFICIENT_AMOUNT"); require( reserveA > 0 && reserveB > 0, "UniswapV2Library: INSUFFICIENT_LIQUIDITY" ); amountB = amountA.mul(reserveB) / reserveA; } // given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset function getAmountOut( uint256 amountIn, uint256 reserveIn, uint256 reserveOut ) internal pure returns (uint256 amountOut) { require(amountIn > 0, "UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT"); require( reserveIn > 0 && reserveOut > 0, "UniswapV2Library: INSUFFICIENT_LIQUIDITY" ); uint256 amountInWithFee = amountIn.mul(997); uint256 numerator = amountInWithFee.mul(reserveOut); uint256 denominator = reserveIn.mul(1000).add(amountInWithFee); amountOut = numerator / denominator; } // given an output amount of an asset and pair reserves, returns a required input amount of the other asset function getAmountIn( uint256 amountOut, uint256 reserveIn, uint256 reserveOut ) internal pure returns (uint256 amountIn) { require(amountOut > 0, "UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT"); require( reserveIn > 0 && reserveOut > 0, "UniswapV2Library: INSUFFICIENT_LIQUIDITY" ); uint256 numerator = reserveIn.mul(amountOut).mul(1000); uint256 denominator = reserveOut.sub(amountOut).mul(997); amountIn = (numerator / denominator).add(1); } // performs chained getAmountOut calculations on any number of pairs function getAmountsOut( address factory, uint256 amountIn, address[] memory path ) internal view returns (uint256[] memory amounts) { require(path.length >= 2, "UniswapV2Library: INVALID_PATH"); amounts = new uint256[](path.length); amounts[0] = amountIn; for (uint256 i; i < path.length - 1; i++) { (uint256 reserveIn, uint256 reserveOut) = getReserves( factory, path[i], path[i + 1] ); amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut); } } // performs chained getAmountIn calculations on any number of pairs function getAmountsIn( address factory, uint256 amountOut, address[] memory path ) internal view returns (uint256[] memory amounts) { require(path.length >= 2, "UniswapV2Library: INVALID_PATH"); amounts = new uint256[](path.length); amounts[amounts.length - 1] = amountOut; for (uint256 i = path.length - 1; i > 0; i--) { (uint256 reserveIn, uint256 reserveOut) = getReserves( factory, path[i - 1], path[i] ); amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut); } } } // fixed window oracle that recomputes the average price for the entire period once every period // note that the price average is only guaranteed to be over at least 1 period, but may be over a longer period contract ExampleOracleSimple { using FixedPoint for *; IUniswapV2Pair immutable pair; address public immutable token0; address public immutable token1; uint256 public price0CumulativeLast; uint256 public price1CumulativeLast; uint32 public blockTimestampLast; FixedPoint.uq112x112 public price0Average; FixedPoint.uq112x112 public price1Average; constructor( address factory, address tokenA, address tokenB ) public { IUniswapV2Pair _pair = IUniswapV2Pair( UniswapV2Library.pairFor(factory, tokenA, tokenB) ); pair = _pair; token0 = _pair.token0(); token1 = _pair.token1(); price0CumulativeLast = _pair.price0CumulativeLast(); // fetch the current accumulated price value (1 / 0) price1CumulativeLast = _pair.price1CumulativeLast(); // fetch the current accumulated price value (0 / 1) uint112 reserve0; uint112 reserve1; (reserve0, reserve1, blockTimestampLast) = _pair.getReserves(); // ensure that there's liquidity in the pair require( reserve0 != 0 && reserve1 != 0, "ExampleOracleSimple: NO_RESERVES" ); } function update() internal { ( uint256 price0Cumulative, uint256 price1Cumulative, uint32 blockTimestamp ) = UniswapV2OracleLibrary.currentCumulativePrices(address(pair)); uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired // overflow is desired, casting never truncates // cumulative price is in (uq112x112 price * seconds) units so we simply wrap it after division by time elapsed price0Average = FixedPoint.uq112x112( uint224((price0Cumulative - price0CumulativeLast) / timeElapsed) ); price1Average = FixedPoint.uq112x112( uint224((price1Cumulative - price1CumulativeLast) / timeElapsed) ); price0CumulativeLast = price0Cumulative; price1CumulativeLast = price1Cumulative; blockTimestampLast = blockTimestamp; } // note this will always return 0 before update has been called successfully for the first time. function consult(address token, uint256 amountIn) internal view returns (uint256 amountOut) { if (token == token0) { amountOut = price0Average.mul(amountIn).decode144(); } else { require(token == token1, "ExampleOracleSimple: INVALID_TOKEN"); amountOut = price1Average.mul(amountIn).decode144(); } } } contract Oracle is Ownable, ExampleOracleSimple { address debase; address public debasePolicy; uint256 constant SCALE = 10**18; address constant uniFactory = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f; constructor( address debase_, address Dai_, address debasePolicy_ ) public ExampleOracleSimple(uniFactory, debase_, Dai_) { debase = debase_; debasePolicy = debasePolicy_; } /** * @notice Function that must be called 24 hours before the very first rebase of debase protocol to get an accurate price. */ function updateBeforeRebase() public onlyOwner { update(); } /** * @notice Get a price data sample from the oralce. Can only be called by the debase policy. * @return The price and if the price if valid */ function getData() external returns (uint256, bool) { require( msg.sender == debasePolicy, "Only debase policy can get data from oracle" ); update(); uint256 price = consult(debase, SCALE); // will return 1 BASED in Dai if (price == 0) { return (0, false); } return (price, true); } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } interface PoolI { function rewardDistributed() external returns (uint256); function startPool() external; function periodFinish() external returns (uint256); } interface DebaseI { function totalSupply() external view returns (uint256); function balanceOf(address who) external returns (uint256); function rebase(uint256 epoch, int256 supplyDelta) external returns (uint256); function transfer(address to, uint256 value) external returns (bool); } interface DebasePolicyI { function rebase() external; } interface UniV2PairI { function sync() external; } /** * @title Orchestrator * @notice The orchestrator is the main entry point for rebase operations. It coordinates the debase policy * actions with external consumers. */ contract Orchestrator is Ownable, Initializable { using SafeMath for uint256; // Stable ordering is not guaranteed. DebaseI public debase; DebasePolicyI public debasePolicy; PoolI public debaseDaiPool; PoolI public debaseDaiLpPool; PoolI public degovDaiLpPool; bool public rebaseStarted; uint256 public maximumRebaseTime; uint256 public rebaseRequiredSupply; event LogRebaseStarted(uint256 timeStarted); event LogAddNewUniPair(address token1, address token2); event LogDeleteUniPair(bool enabled, address uniPair); event LogSetUniPairEnabled(uint256 index, bool enabled); uint256 constant SYNC_GAS = 50000; address constant uniFactory = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f; struct UniPair { bool enabled; UniV2PairI pair; } UniPair[] public uniSyncs; modifier indexInBounds(uint256 index) { require( index < uniSyncs.length, "Index must be less than array length" ); _; } // https://uniswap.org/docs/v2/smart-contract-integration/getting-pair-addresses/ function genUniAddr(address left, address right) internal pure returns (UniV2PairI) { address first = left < right ? left : right; address second = left < right ? right : left; address pair = address( uint256( keccak256( abi.encodePacked( hex"ff", uniFactory, keccak256(abi.encodePacked(first, second)), hex"96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f" ) ) ) ); return UniV2PairI(pair); } function initialize( address debase_, address debasePolicy_, address debaseDaiPool_, address debaseDaiLpPool_, address degovDaiLpPool_, uint256 rebaseRequiredSupply_, uint256 oracleStartTimeOffset ) external initializer { debase = DebaseI(debase_); debasePolicy = DebasePolicyI(debasePolicy_); debaseDaiPool = PoolI(debaseDaiPool_); debaseDaiLpPool = PoolI(debaseDaiLpPool_); degovDaiLpPool = PoolI(degovDaiLpPool_); maximumRebaseTime = block.timestamp + oracleStartTimeOffset; rebaseStarted = false; rebaseRequiredSupply = rebaseRequiredSupply_; } function addUniPair(address token1, address token2) external onlyOwner { uniSyncs.push(UniPair(true, genUniAddr(token1, token2))); emit LogAddNewUniPair(token1, token2); } function deleteUniPair(uint256 index) external onlyOwner indexInBounds(index) { UniPair memory instanceToDelete = uniSyncs[index]; if (index < uniSyncs.length.sub(1)) { uniSyncs[index] = uniSyncs[uniSyncs.length.sub(1)]; } emit LogDeleteUniPair( instanceToDelete.enabled, address(instanceToDelete.pair) ); uniSyncs.pop(); delete instanceToDelete; } function setUniPairEnabled(uint256 index, bool enabled) external onlyOwner indexInBounds(index) { UniPair storage instance = uniSyncs[index]; instance.enabled = enabled; emit LogSetUniPairEnabled(index, enabled); } /** * @notice Main entry point to initiate a rebase operation. * The Orchestrator calls rebase on the debase policy and notifies downstream applications. * Contracts are guarded from calling, to avoid flash loan attacks on liquidity * providers. * If a transaction in the transaction list reverts, it is swallowed and the remaining * transactions are executed. */ function rebase() external { // Rebase will only be called when 95% of the total supply has been distributed or current time is 3 weeks since the orchestrator was deployed. // To stop the rebase from getting stuck if no enough rewards are distributed. This will also start the degov/debase pool reward drops if (rebaseStarted == false) { uint256 rewardsDistributed = debaseDaiPool.rewardDistributed().add( debaseDaiLpPool.rewardDistributed() ); require( rewardsDistributed >= rebaseRequiredSupply || block.timestamp >= maximumRebaseTime, "Not enough rewards distributed or time less than start time" ); //Start degov reward drop degovDaiLpPool.startPool(); rebaseStarted = true; emit LogRebaseStarted(block.timestamp); } require(msg.sender == tx.origin); // solhint-disable-line avoid-tx-origin debasePolicy.rebase(); for (uint256 i = 0; i < uniSyncs.length; i++) { if (uniSyncs[i].enabled) { address(uniSyncs[i].pair).call{gas: SYNC_GAS}( abi.encode(uniSyncs[i].pair.sync.selector) ); } } } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /** * @dev Standard math utilities missing in the Solidity language. */ library Math { /** * @dev Returns the largest of two numbers. */ function max(uint256 a, uint256 b) internal pure returns (uint256) { return a >= b ? a : b; } /** * @dev Returns the smallest of two numbers. */ function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } /** * @dev Returns the average of two numbers. The result is rounded towards * zero. */ function average(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b) / 2 can overflow, so we distribute return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2); } } /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of decimals of the tokens. */ function decimals() external view returns (uint8); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval( address indexed owner, address indexed spender, uint256 value ); } /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies in extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require( address(this).balance >= amount, "Address: insufficient balance" ); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{value: amount}(""); require( success, "Address: unable to send value, recipient may have reverted" ); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return _functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue( target, data, value, "Address: low-level call with value failed" ); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require( address(this).balance >= value, "Address: insufficient balance for call" ); return _functionCallWithValue(target, data, value, errorMessage); } function _functionCallWithValue( address target, bytes memory data, uint256 weiValue, string memory errorMessage ) private returns (bytes memory) { require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{value: weiValue}( data ); if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using SafeMath for uint256; using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn( token, abi.encodeWithSelector(token.transfer.selector, to, value) ); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn( token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value) ); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' // solhint-disable-next-line max-line-length require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn( token, abi.encodeWithSelector(token.approve.selector, spender, value) ); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender).add( value ); _callOptionalReturn( token, abi.encodeWithSelector( token.approve.selector, spender, newAllowance ) ); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender).sub( value, "SafeERC20: decreased allowance below zero" ); _callOptionalReturn( token, abi.encodeWithSelector( token.approve.selector, spender, newAllowance ) ); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall( data, "SafeERC20: low-level call failed" ); if (returndata.length > 0) { // Return data is optional // solhint-disable-next-line max-line-length require( abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed" ); } } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /* ____ __ __ __ _ / __/__ __ ___ / /_ / / ___ / /_ (_)__ __ _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ / /___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\ /___/ * Synthetix: YAMRewards.sol * * Docs: https://docs.synthetix.io/ * * * MIT License * =========== * * Copyright (c) 2020 Synthetix * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE */ abstract contract IRewardDistributionRecipient is Ownable { address public rewardDistribution; function notifyRewardAmount(uint256 reward) internal virtual; modifier onlyRewardDistribution() { require( msg.sender == rewardDistribution, "Caller is not reward distribution" ); _; } function setRewardDistribution(address _rewardDistribution) public { rewardDistribution = _rewardDistribution; } } contract LPTokenWrapper { using SafeMath for uint256; using SafeERC20 for IERC20; IERC20 public y; function setStakeToken(address _y) internal { y = IERC20(_y); } uint256 private _totalSupply; mapping(address => uint256) private _balances; function totalSupply() public view returns (uint256) { return _totalSupply; } function balanceOf(address account) public view returns (uint256) { return _balances[account]; } function stake(uint256 amount) public virtual { _totalSupply = _totalSupply.add(amount); _balances[msg.sender] = _balances[msg.sender].add(amount); y.safeTransferFrom(msg.sender, address(this), amount); } function withdraw(uint256 amount) public virtual { _totalSupply = _totalSupply.sub(amount); _balances[msg.sender] = _balances[msg.sender].sub(amount); y.safeTransfer(msg.sender, amount); } } contract StabilizerPool is Initializable, LPTokenWrapper, IRewardDistributionRecipient { event LogCountThreshold(uint256 countThreshold_); event LogBeforePeriodFinish(bool beforePeriodFinish_); event LogCountInSequence(bool CountInSequence_); event LogSetRewardAmount(uint256 rewardAmount_); event RewardAdded(uint256 reward); event Staked(address indexed user, uint256 amount); event Withdrawn(address indexed user, uint256 amount); event RewardPaid(address indexed user, uint256 reward); event ManualPoolStarted(uint256 startedAt); event LogSetDuration(uint256 duration); event LogSetPoolEnabled(bool poolEnabled); string public poolName; IERC20 public rewardToken; address public policy; uint256 public duration; bool public poolEnabled; uint256 public rewardAmount; uint256 public periodFinish; uint256 public rewardRate; uint256 public lastUpdateTime; uint256 public rewardPerTokenStored; uint256 public rewardDistributed; // The count of s hitting their target uint256 public count; // The threshold count on which to send rewards to the stabilizer pool uint256 public countThreshold; // Flag to enable or disable sequence checker bool public countInSequence; // Flag to send reward before stabilizer pool period time finished bool public beforePeriodFinish; mapping(address => uint256) public userRewardPerTokenPaid; mapping(address => uint256) public rewards; modifier checkStart() { require(poolEnabled == true, "Orchestrator hasn't started pool"); _; } modifier updateReward(address account) { rewardPerTokenStored = rewardPerToken(); lastUpdateTime = lastTimeRewardApplicable(); if (account != address(0)) { rewards[account] = earned(account); userRewardPerTokenPaid[account] = rewardPerTokenStored; } _; } function initialize( string memory poolName_, address rewardToken_, address pairToken_, address policy_, uint256 rewardAmount_, uint256 duration_ ) public initializer { poolName = poolName_; setStakeToken(pairToken_); rewardToken = IERC20(rewardToken_); policy = policy_; duration = duration_; poolEnabled = false; rewardAmount = rewardAmount_; count = 0; countThreshold = 20; countInSequence = true; beforePeriodFinish = false; } /** * @notice Upon succesive succesful s ( exchange price in target price ) the count will increase. As the count increases if it * meets the set threshold. Then a precentage of debase tokens assigned to the policy contract will be transfered to the stabilizer pool. * With the added condition that the stabilizer pool has completed it's distribution period or a new flag is set to ovverride the time period. */ function checkStabilizerAndGetReward( int256 supplyDelta_, int256 rebaseLag_, uint256 exchangeRate_, uint256 debasePolicyBalance ) external returns (uint256 rewardAmount_) { require( msg.sender == policy, "Only debase policy contract can call this" ); if (supplyDelta_ == 0) { count = count.add(1); if (count >= countThreshold) { count = 0; if ( debasePolicyBalance >= rewardAmount && (beforePeriodFinish || now >= periodFinish) ) { notifyRewardAmount(rewardAmount); return rewardAmount; } } } else if (countInSequence && count != 0) { count = 0; } return 0; } function setRewardAmount(uint256 rewardAmount_) external onlyOwner { rewardAmount = rewardAmount_; emit LogSetRewardAmount(rewardAmount); } /** * @notice Function to enable or disable count should be in sequence */ function setCountInSequence(bool countInSequence_) external onlyOwner { countInSequence = countInSequence_; count = 0; emit LogCountInSequence(!countInSequence); } /** * @notice Function to set the count threshold * @param countThreshold_ The new threshold */ function setCountThreshold(uint256 countThreshold_) external onlyOwner { require(countThreshold_ >= 1); countThreshold = countThreshold_; count = 0; emit LogCountThreshold(countThreshold); } /** * @notice Function to allow reward distribution before previous rewards have been distributed * @param beforePeriodFinish_ Flag to toggle distribution */ function setBeforePeriodFinish(bool beforePeriodFinish_) external onlyOwner { beforePeriodFinish = beforePeriodFinish_; emit LogBeforePeriodFinish(beforePeriodFinish); } /** * @notice Function to set reward drop period * @param duration_ New drop duration */ function setDuration(uint256 duration_) external onlyOwner { require(duration >= 1); duration = duration_; emit LogSetDuration(duration); } /** * @notice Function enabled or disable pool staking,withdraw * @param poolEnabled_ Flag to toggle pool */ function setPoolEnabled(bool poolEnabled_) external onlyOwner { poolEnabled = poolEnabled_; count = 0; emit LogSetPoolEnabled(poolEnabled); } function lastTimeRewardApplicable() public view returns (uint256) { return Math.min(block.timestamp, periodFinish); } function rewardPerToken() public view returns (uint256) { if (totalSupply() == 0) { return rewardPerTokenStored; } return rewardPerTokenStored.add( lastTimeRewardApplicable() .sub(lastUpdateTime) .mul(rewardRate) .mul(10**18) .div(totalSupply()) ); } function earned(address account) public view returns (uint256) { return balanceOf(account) .mul(rewardPerToken().sub(userRewardPerTokenPaid[account])) .div(10**18) .add(rewards[account]); } // stake visibility is public as overriding LPTokenWrapper's stake() function function stake(uint256 amount) public override updateReward(msg.sender) checkStart { require(amount > 0, "Cannot stake 0"); super.stake(amount); emit Staked(msg.sender, amount); } function withdraw(uint256 amount) public override updateReward(msg.sender) checkStart { require(amount > 0, "Cannot withdraw 0"); super.withdraw(amount); emit Withdrawn(msg.sender, amount); } function exit() external { withdraw(balanceOf(msg.sender)); getReward(); } function getReward() public updateReward(msg.sender) checkStart { uint256 reward = earned(msg.sender); if (reward > 0) { rewards[msg.sender] = 0; rewardToken.safeTransfer(msg.sender, reward); emit RewardPaid(msg.sender, reward); rewardDistributed = rewardDistributed.add(reward); } } function notifyRewardAmount(uint256 reward) internal override updateReward(address(0)) { if (block.timestamp >= periodFinish) { rewardRate = reward.div(duration); } else { uint256 remaining = periodFinish.sub(block.timestamp); uint256 leftover = remaining.mul(rewardRate); rewardRate = reward.add(leftover).div(duration); } lastUpdateTime = block.timestamp; periodFinish = block.timestamp.add(duration); emit RewardAdded(reward); } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /** * @dev Standard math utilities missing in the Solidity language. */ library Math { /** * @dev Returns the largest of two numbers. */ function max(uint256 a, uint256 b) internal pure returns (uint256) { return a >= b ? a : b; } /** * @dev Returns the smallest of two numbers. */ function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } /** * @dev Returns the average of two numbers. The result is rounded towards * zero. */ function average(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b) / 2 can overflow, so we distribute return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2); } } /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of decimals of the tokens. */ function decimals() external view returns (uint8); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval( address indexed owner, address indexed spender, uint256 value ); } /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies in extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require( address(this).balance >= amount, "Address: insufficient balance" ); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{value: amount}(""); require( success, "Address: unable to send value, recipient may have reverted" ); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return _functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue( target, data, value, "Address: low-level call with value failed" ); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require( address(this).balance >= value, "Address: insufficient balance for call" ); return _functionCallWithValue(target, data, value, errorMessage); } function _functionCallWithValue( address target, bytes memory data, uint256 weiValue, string memory errorMessage ) private returns (bytes memory) { require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{value: weiValue}( data ); if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using SafeMath for uint256; using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn( token, abi.encodeWithSelector(token.transfer.selector, to, value) ); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn( token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value) ); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' // solhint-disable-next-line max-line-length require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn( token, abi.encodeWithSelector(token.approve.selector, spender, value) ); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender).add( value ); _callOptionalReturn( token, abi.encodeWithSelector( token.approve.selector, spender, newAllowance ) ); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender).sub( value, "SafeERC20: decreased allowance below zero" ); _callOptionalReturn( token, abi.encodeWithSelector( token.approve.selector, spender, newAllowance ) ); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall( data, "SafeERC20: low-level call failed" ); if (returndata.length > 0) { // Return data is optional // solhint-disable-next-line max-line-length require( abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed" ); } } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } /* ____ __ __ __ _ / __/__ __ ___ / /_ / / ___ / /_ (_)__ __ _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ / /___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\ /___/ * Synthetix: YAMRewards.sol * * Docs: https://docs.synthetix.io/ * * * MIT License * =========== * * Copyright (c) 2020 Synthetix * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE */ abstract contract IRewardDistributionRecipient { address public rewardDistribution; function notifyRewardAmount(uint256 reward) internal virtual; modifier onlyRewardDistribution() { require( msg.sender == rewardDistribution, "Caller is not reward distribution" ); _; } function setRewardDistribution(address _rewardDistribution) public { rewardDistribution = _rewardDistribution; } } contract LPTokenWrapper { using SafeMath for uint256; using SafeERC20 for IERC20; IERC20 public y; function setStakeToken(address _y) internal { y = IERC20(_y); } uint256 private _totalSupply; mapping(address => uint256) private _balances; function totalSupply() public view returns (uint256) { return _totalSupply; } function balanceOf(address account) public view returns (uint256) { return _balances[account]; } function stake(uint256 amount) public virtual { _totalSupply = _totalSupply.add(amount); _balances[msg.sender] = _balances[msg.sender].add(amount); y.safeTransferFrom(msg.sender, address(this), amount); } function withdraw(uint256 amount) public virtual { _totalSupply = _totalSupply.sub(amount); _balances[msg.sender] = _balances[msg.sender].sub(amount); y.safeTransfer(msg.sender, amount); } } contract StakingPool is Initializable, LPTokenWrapper, IRewardDistributionRecipient { string public poolName; IERC20 public rewardToken; address public orchestrator; uint256 public duration; bool public manualStartPool; uint256 public initReward; uint256 public maxReward; bool public poolStarted; uint256 public startTime; uint256 public periodFinish; uint256 public rewardRate; uint256 public lastUpdateTime; uint256 public rewardPerTokenStored; uint256 public rewardDistributed; uint256 public fairDistributionTokenLimit; uint256 public fairDistributionTimeLimit; bool public isFairDistribution; address constant uniFactory = 0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f; mapping(address => uint256) public userRewardPerTokenPaid; mapping(address => uint256) public rewards; event RewardAdded(uint256 reward); event Staked(address indexed user, uint256 amount); event Withdrawn(address indexed user, uint256 amount); event RewardPaid(address indexed user, uint256 reward); event ManualPoolStarted(uint256 startedAt); modifier checkHalve() { if (block.timestamp >= periodFinish) { initReward = initReward.mul(50).div(100); rewardRate = initReward.div(duration); periodFinish = block.timestamp.add(duration); emit RewardAdded(initReward); } _; } modifier checkStart() { if (manualStartPool) { require(poolStarted == true, "Orchestrator hasn't started pool"); } else { require( block.timestamp > startTime, "Can't use pool before start time" ); } _; } modifier updateReward(address account) { rewardPerTokenStored = rewardPerToken(); lastUpdateTime = lastTimeRewardApplicable(); if (account != address(0)) { rewards[account] = earned(account); userRewardPerTokenPaid[account] = rewardPerTokenStored; } _; } // https://uniswap.org/docs/v2/smart-contract-integration/getting-pair-addresses/ function genUniAddr(address left, address right) internal pure returns (address) { address first = left < right ? left : right; address second = left < right ? right : left; address pair = address( uint256( keccak256( abi.encodePacked( hex"ff", uniFactory, keccak256(abi.encodePacked(first, second)), hex"96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f" ) ) ) ); return pair; } function initialize( string memory poolName_, address rewardToken_, address pairToken_, bool isUniPair, address orchestrator_, uint256 duration_, bool isFairDistribution_, uint256 fairDistributionTokenLimit_, uint256 fairDistributionTimeLimit_, bool manualStartPool_, uint256 oracleStartTimeOffset ) public initializer { poolName = poolName_; if (isUniPair) { setStakeToken(genUniAddr(rewardToken_, pairToken_)); } else { setStakeToken(pairToken_); } rewardToken = IERC20(rewardToken_); orchestrator = orchestrator_; maxReward = rewardToken.balanceOf(address(this)); duration = duration_; isFairDistribution = isFairDistribution_; fairDistributionTokenLimit = fairDistributionTokenLimit_; fairDistributionTimeLimit = fairDistributionTimeLimit_; manualStartPool = manualStartPool_; if (!manualStartPool) { startTime = block.timestamp + oracleStartTimeOffset; notifyRewardAmount(maxReward.mul(50).div(100)); } } function startPool() external { require(msg.sender == address(orchestrator)); require(poolStarted == false, "Pool can only be started once"); poolStarted = true; startTime = block.timestamp + 1; notifyRewardAmount(maxReward.mul(50).div(100)); emit ManualPoolStarted(startTime); } function lastTimeRewardApplicable() public view returns (uint256) { return Math.min(block.timestamp, periodFinish); } function rewardPerToken() public view returns (uint256) { if (totalSupply() == 0) { return rewardPerTokenStored; } return rewardPerTokenStored.add( lastTimeRewardApplicable() .sub(lastUpdateTime) .mul(rewardRate) .mul(10**18) .div(totalSupply()) ); } function earned(address account) public view returns (uint256) { return balanceOf(account) .mul(rewardPerToken().sub(userRewardPerTokenPaid[account])) .div(10**18) .add(rewards[account]); } // stake visibility is public as overriding LPTokenWrapper's stake() function function stake(uint256 amount) public override updateReward(msg.sender) checkHalve checkStart { require(amount > 0, "Cannot stake 0"); super.stake(amount); emit Staked(msg.sender, amount); if (isFairDistribution) { require( balanceOf(msg.sender) <= fairDistributionTokenLimit * uint256(10)**y.decimals() || block.timestamp >= startTime.add(fairDistributionTimeLimit), "Can't stake more than distribution limit" ); } } function withdraw(uint256 amount) public override updateReward(msg.sender) checkHalve checkStart { require(amount > 0, "Cannot withdraw 0"); super.withdraw(amount); emit Withdrawn(msg.sender, amount); } function exit() external { withdraw(balanceOf(msg.sender)); getReward(); } function getReward() public updateReward(msg.sender) checkHalve checkStart { uint256 reward = earned(msg.sender); if (reward > 0) { rewards[msg.sender] = 0; rewardToken.safeTransfer(msg.sender, reward); emit RewardPaid(msg.sender, reward); rewardDistributed = rewardDistributed.add(reward); } } function notifyRewardAmount(uint256 reward) internal override updateReward(address(0)) { if (block.timestamp >= periodFinish) { rewardRate = reward.div(duration); } else { uint256 remaining = periodFinish.sub(block.timestamp); uint256 leftover = remaining.mul(rewardRate); rewardRate = reward.add(leftover).div(duration); } initReward = reward; lastUpdateTime = block.timestamp; periodFinish = block.timestamp.add(duration); emit RewardAdded(reward); } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.6; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod( uint256 a, uint256 b, string memory errorMessage ) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } } /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal virtual view returns (address payable) { return msg.sender; } function _msgData() internal virtual view returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred( address indexed previousOwner, address indexed newOwner ); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require( newOwner != address(0), "Ownable: new owner is the zero address" ); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /** * @title Initializable * * @dev Helper contract to support initializer functions. To use it, replace * the constructor with a function that has the `initializer` modifier. * WARNING: Unlike constructors, initializer functions must be manually * invoked. This applies both to deploying an Initializable contract, as well * as extending an Initializable contract via inheritance. * WARNING: When used with inheritance, manual care must be taken to not invoke * a parent initializer twice, or ensure that all initializers are idempotent, * because this is not dealt with automatically as with constructors. */ contract Initializable { /** * @dev Indicates that the contract has been initialized. */ bool private initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool private initializing; /** * @dev Modifier to use in the initializer function of a contract. */ modifier initializer() { require( initializing || isConstructor() || !initialized, "Contract instance has already been initialized" ); bool isTopLevelCall = !initializing; if (isTopLevelCall) { initializing = true; initialized = true; } _; if (isTopLevelCall) { initializing = false; } } /// @dev Returns true if and only if the function is running in the constructor function isConstructor() private view returns (bool) { // extcodesize checks the size of the code stored in an address, and // address returns the current address. Since the code is still not // deployed when running a constructor, any checks on its code size will // yield zero, making it an effective way to detect if a contract is // under construction or not. address self = address(this); uint256 cs; assembly { cs := extcodesize(self) } return cs == 0; } // Reserved storage space to allow for layout changes in the future. uint256[50] private ______gap; } contract Timelock is Initializable, Ownable { using SafeMath for uint256; event NewAdmin(address indexed newAdmin_); event NewPendingAdmin(address indexed newPendingAdmin_); event NewDelay(uint256 indexed newDelay_); event NewGracePeriod(uint256 indexed newGracePerios_); event CancelTransaction( bytes32 indexed txHash_, address indexed target_, uint256 value_, string signature_, bytes data_, uint256 eta_ ); event ExecuteTransaction( bytes32 indexed txHash_, address indexed target_, uint256 value_, string signature_, bytes data_, uint256 eta_ ); event QueueTransaction( bytes32 indexed txHash_, address indexed target_, uint256 value_, string signature_, bytes data_, uint256 eta_ ); address public admin; address public pendingAdmin; // The amount of delay after which a delay can a queued can be executed. uint256 public delay = 1 days; // The the period within which an queued proposal can be executed. uint256 public gracePeriod = 7 days; mapping(bytes32 => bool) public queuedTransactions; /** * @notice Initializes timelock contract with the address of the governor/admin * @param admin_ Address of the timelock admin. */ function initialize(address admin_) external onlyOwner initializer { admin = admin_; } receive() external payable {} /** * @notice Sets the amount of time after which a proposal that has been queued can be executed. * @param delay_ The amount of delay to set. */ function setDelay(uint256 delay_) public onlyOwner { require( delay_ >= 0 && delay_ < gracePeriod, "Timelock::setDelay: Delay must not be greater equal to zero and less than gracePeriod" ); delay = delay_; emit NewDelay(delay); } /** * @notice Sets the amount of time within which a queued proposal can be executed. * @param gracePeriod_ The new grace period to be set. */ function setGracePeriod(uint256 gracePeriod_) public onlyOwner { require( gracePeriod_ > delay, "Timelock::gracePeriod: Grace period must be greater delay" ); gracePeriod = gracePeriod_; emit NewGracePeriod(gracePeriod); } function acceptAdmin() public { require( msg.sender == pendingAdmin, "Timelock::acceptAdmin: Call must come from pendingAdmin." ); admin = msg.sender; pendingAdmin = address(0); emit NewAdmin(admin); } function setPendingAdmin(address pendingAdmin_) public onlyOwner { pendingAdmin = pendingAdmin_; emit NewPendingAdmin(pendingAdmin); } function queueTransaction( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) public returns (bytes32) { require( msg.sender == admin, "Timelock::queueTransaction: Call must come from admin." ); require( eta >= getBlockTimestamp().add(delay), "Timelock::queueTransaction: Estimated execution block must satisfy delay." ); bytes32 txHash = keccak256( abi.encode(target, value, signature, data, eta) ); queuedTransactions[txHash] = true; emit QueueTransaction(txHash, target, value, signature, data, eta); return txHash; } function cancelTransaction( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) public { require( msg.sender == admin, "Timelock::cancelTransaction: Call must come from admin." ); bytes32 txHash = keccak256( abi.encode(target, value, signature, data, eta) ); queuedTransactions[txHash] = false; emit CancelTransaction(txHash, target, value, signature, data, eta); } function executeTransaction( address target, uint256 value, string memory signature, bytes memory data, uint256 eta ) public payable returns (bytes memory) { require( msg.sender == admin, "Timelock::executeTransaction: Call must come from admin." ); bytes32 txHash = keccak256( abi.encode(target, value, signature, data, eta) ); require( queuedTransactions[txHash], "Timelock::executeTransaction: Transaction hasn't been queued." ); require( getBlockTimestamp() >= eta, "Timelock::executeTransaction: Transaction hasn't surpassed time lock." ); require( getBlockTimestamp() <= eta.add(gracePeriod), "Timelock::executeTransaction: Transaction is stale." ); queuedTransactions[txHash] = false; bytes memory callData; if (bytes(signature).length == 0) { callData = data; } else { callData = abi.encodePacked( bytes4(keccak256(bytes(signature))), data ); } // solium-disable-next-line security/no-call-value (bool success, bytes memory returnData) = target.call{value: value}( callData ); require( success, "Timelock::executeTransaction: Transaction execution reverted." ); emit ExecuteTransaction(txHash, target, value, signature, data, eta); return returnData; } function getBlockTimestamp() internal view returns (uint256) { // solium-disable-next-line security/no-block-members return block.timestamp; } }
{ "metadata": { "useLiteralContent": true }, "optimizer": { "enabled": true, "runs": 200 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "abi" ] } }, "libraries": {} }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"epoch_","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalSupply_","type":"uint256"}],"name":"LogRebase","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner_","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"who","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"debasePolicy","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"debaseDaiPool_","type":"address"},{"internalType":"uint256","name":"debaseDaiTotalRatio","type":"uint256"},{"internalType":"address","name":"debaseDaiLpPool_","type":"address"},{"internalType":"uint256","name":"debaseDaiLpTotalRatio","type":"uint256"},{"internalType":"address","name":"debasePolicy_","type":"address"},{"internalType":"uint256","name":"debasePolicyTotalRatio","type":"uint256"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"epoch","type":"uint256"},{"internalType":"int256","name":"supplyDelta","type":"int256"}],"name":"rebase","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]
Contract Creation Code
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
Deployed Bytecode
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
Loading...
Loading
Loading...
Loading
[ Download: CSV Export ]
[ Download: CSV Export ]
A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.