Token

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/utils/IVotes.sol)
pragma solidity ^0.8.0;

/**
 * @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.
 *
 * _Available since v4.5._
 */
interface IVotes {
    /**
     * @dev Emitted when an account changes their delegate.
     */
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /**
     * @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.
     */
    event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);

    /**
     * @dev Returns the current amount of votes that `account` has.
     */
    function getVotes(address account) external view returns (uint256);

    /**
     * @dev Returns the amount of votes that `account` had at the end of a past block (`blockNumber`).
     */
    function getPastVotes(address account, uint256 blockNumber) external view returns (uint256);

    /**
     * @dev Returns the total supply of votes available at the end of a past block (`blockNumber`).
     *
     * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
     * Votes that have not been delegated are still part of total supply, even though they would not participate in a
     * vote.
     */
    function getPastTotalSupply(uint256 blockNumber) external view returns (uint256);

    /**
     * @dev Returns the delegate that `account` has chosen.
     */
    function delegates(address account) external view returns (address);

    /**
     * @dev Delegates votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) external;

    /**
     * @dev Delegates votes from signer to `delegatee`.
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Votes.sol)

pragma solidity ^0.8.0;

import "./draft-ERC20Permit.sol";
import "../../../utils/math/Math.sol";
import "../../../governance/utils/IVotes.sol";
import "../../../utils/math/SafeCast.sol";
import "../../../utils/cryptography/ECDSA.sol";

/**
 * @dev Extension of ERC20 to support Compound-like voting and delegation. This version is more generic than Compound's,
 * and supports token supply up to 2^224^ - 1, while COMP is limited to 2^96^ - 1.
 *
 * NOTE: If exact COMP compatibility is required, use the {ERC20VotesComp} variant of this module.
 *
 * This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either
 * by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting
 * power can be queried through the public accessors {getVotes} and {getPastVotes}.
 *
 * By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it
 * requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.
 *
 * _Available since v4.2._
 */
abstract contract ERC20Votes is IVotes, ERC20Permit {
    struct Checkpoint {
        uint32 fromBlock;
        uint224 votes;
    }

    bytes32 private constant _DELEGATION_TYPEHASH =
        keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    mapping(address => address) private _delegates;
    mapping(address => Checkpoint[]) private _checkpoints;
    Checkpoint[] private _totalSupplyCheckpoints;

    /**
     * @dev Get the `pos`-th checkpoint for `account`.
     */
    function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {
        return _checkpoints[account][pos];
    }

    /**
     * @dev Get number of checkpoints for `account`.
     */
    function numCheckpoints(address account) public view virtual returns (uint32) {
        return SafeCast.toUint32(_checkpoints[account].length);
    }

    /**
     * @dev Get the address `account` is currently delegating to.
     */
    function delegates(address account) public view virtual override returns (address) {
        return _delegates[account];
    }

    /**
     * @dev Gets the current votes balance for `account`
     */
    function getVotes(address account) public view virtual override returns (uint256) {
        uint256 pos = _checkpoints[account].length;
        return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;
    }

    /**
     * @dev Retrieve the number of votes for `account` at the end of `blockNumber`.
     *
     * Requirements:
     *
     * - `blockNumber` must have been already mined
     */
    function getPastVotes(address account, uint256 blockNumber) public view virtual override returns (uint256) {
        require(blockNumber < block.number, "ERC20Votes: block not yet mined");
        return _checkpointsLookup(_checkpoints[account], blockNumber);
    }

    /**
     * @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.
     * It is but NOT the sum of all the delegated votes!
     *
     * Requirements:
     *
     * - `blockNumber` must have been already mined
     */
    function getPastTotalSupply(uint256 blockNumber) public view virtual override returns (uint256) {
        require(blockNumber < block.number, "ERC20Votes: block not yet mined");
        return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);
    }

    /**
     * @dev Lookup a value in a list of (sorted) checkpoints.
     */
    function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {
        // We run a binary search to look for the earliest checkpoint taken after `blockNumber`.
        //
        // During the loop, the index of the wanted checkpoint remains in the range [low-1, high).
        // With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the invariant.
        // - If the middle checkpoint is after `blockNumber`, we look in [low, mid)
        // - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)
        // Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not
        // out of bounds (in which case we're looking too far in the past and the result is 0).
        // Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is
        // past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out
        // the same.
        uint256 high = ckpts.length;
        uint256 low = 0;
        while (low < high) {
            uint256 mid = Math.average(low, high);
            if (ckpts[mid].fromBlock > blockNumber) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }

        return high == 0 ? 0 : ckpts[high - 1].votes;
    }

    /**
     * @dev Delegate votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) public virtual override {
        _delegate(_msgSender(), delegatee);
    }

    /**
     * @dev Delegates votes from signer to `delegatee`
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= expiry, "ERC20Votes: signature expired");
        address signer = ECDSA.recover(
            _hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),
            v,
            r,
            s
        );
        require(nonce == _useNonce(signer), "ERC20Votes: invalid nonce");
        _delegate(signer, delegatee);
    }

    /**
     * @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).
     */
    function _maxSupply() internal view virtual returns (uint224) {
        return type(uint224).max;
    }

    /**
     * @dev Snapshots the totalSupply after it has been increased.
     */
    function _mint(address account, uint256 amount) internal virtual override {
        super._mint(account, amount);
        require(totalSupply() <= _maxSupply(), "ERC20Votes: total supply risks overflowing votes");

        _writeCheckpoint(_totalSupplyCheckpoints, _add, amount);
    }

    /**
     * @dev Snapshots the totalSupply after it has been decreased.
     */
    function _burn(address account, uint256 amount) internal virtual override {
        super._burn(account, amount);

        _writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);
    }

    /**
     * @dev Move voting power when tokens are transferred.
     *
     * Emits a {DelegateVotesChanged} event.
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override {
        super._afterTokenTransfer(from, to, amount);

        _moveVotingPower(delegates(from), delegates(to), amount);
    }

    /**
     * @dev Change delegation for `delegator` to `delegatee`.
     *
     * Emits events {DelegateChanged} and {DelegateVotesChanged}.
     */
    function _delegate(address delegator, address delegatee) internal virtual {
        address currentDelegate = delegates(delegator);
        uint256 delegatorBalance = balanceOf(delegator);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveVotingPower(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveVotingPower(
        address src,
        address dst,
        uint256 amount
    ) private {
        if (src != dst && amount > 0) {
            if (src != address(0)) {
                (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);
                emit DelegateVotesChanged(src, oldWeight, newWeight);
            }

            if (dst != address(0)) {
                (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);
                emit DelegateVotesChanged(dst, oldWeight, newWeight);
            }
        }
    }

    function _writeCheckpoint(
        Checkpoint[] storage ckpts,
        function(uint256, uint256) view returns (uint256) op,
        uint256 delta
    ) private returns (uint256 oldWeight, uint256 newWeight) {
        uint256 pos = ckpts.length;
        oldWeight = pos == 0 ? 0 : ckpts[pos - 1].votes;
        newWeight = op(oldWeight, delta);

        if (pos > 0 && ckpts[pos - 1].fromBlock == block.number) {
            ckpts[pos - 1].votes = SafeCast.toUint224(newWeight);
        } else {
            ckpts.push(Checkpoint({fromBlock: SafeCast.toUint32(block.number), votes: SafeCast.toUint224(newWeight)}));
        }
    }

    function _add(uint256 a, uint256 b) private pure returns (uint256) {
        return a + b;
    }

    function _subtract(uint256 a, uint256 b) private pure returns (uint256) {
        return a - b;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/extensions/draft-ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./draft-IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/draft-EIP712.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)

pragma solidity ^0.8.0;

import "./ECDSA.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. It the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`.
        // We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
        // This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
        // Using an algorithm similar to the msb conmputation, we are able to compute `result = 2**(k/2)` which is a
        // good first aproximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1;
        uint256 x = a;
        if (x >> 128 > 0) {
            x >>= 128;
            result <<= 64;
        }
        if (x >> 64 > 0) {
            x >>= 64;
            result <<= 32;
        }
        if (x >> 32 > 0) {
            x >>= 32;
            result <<= 16;
        }
        if (x >> 16 > 0) {
            x >>= 16;
            result <<= 8;
        }
        if (x >> 8 > 0) {
            x >>= 8;
            result <<= 4;
        }
        if (x >> 4 > 0) {
            x >>= 4;
            result <<= 2;
        }
        if (x >> 2 > 0) {
            result <<= 1;
        }

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        uint256 result = sqrt(a);
        if (rounding == Rounding.Up && result * result < a) {
            result += 1;
        }
        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248) {
        require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
        return int248(value);
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240) {
        require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
        return int240(value);
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232) {
        require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
        return int232(value);
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224) {
        require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
        return int224(value);
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216) {
        require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
        return int216(value);
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208) {
        require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
        return int208(value);
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200) {
        require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
        return int200(value);
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192) {
        require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
        return int192(value);
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184) {
        require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
        return int184(value);
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176) {
        require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
        return int176(value);
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168) {
        require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
        return int168(value);
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160) {
        require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
        return int160(value);
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152) {
        require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
        return int152(value);
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144) {
        require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
        return int144(value);
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136) {
        require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
        return int136(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120) {
        require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
        return int120(value);
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112) {
        require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
        return int112(value);
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104) {
        require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
        return int104(value);
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96) {
        require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
        return int96(value);
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88) {
        require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
        return int88(value);
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80) {
        require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
        return int80(value);
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72) {
        require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
        return int72(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56) {
        require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
        return int56(value);
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48) {
        require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
        return int48(value);
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40) {
        require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
        return int40(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24) {
        require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
        return int24(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

library Types {
    struct FeeRecipients {
        address operations;
        address validatorAcquisition;
        address PCR;
        address yield;
        address xChainValidatorAcquisition;
        address indexFundPools;
        address gAMPRewardsPool;
        address OTCSwap;
        address rescueFund;
        address protocolImprovement;
        address developers;
    }

    struct Fees {
        uint16 operations;
        uint16 validatorAcquisition;
        uint16 PCR;
        uint16 yield;
        uint16 xChainValidatorAcquisition;
        uint16 indexFundPools;
        uint16 gAMPRewardsPool;
        uint16 OTCSwap;
        uint16 rescueFund;
        uint16 protocolImprovement;
        uint16 developers;
    }

    struct Share {
        uint256 amount;
        uint256 totalExcluded;
        uint256 totalRealised;
        uint256 started;
        uint256 unlocks;
    }

    enum FuseProduct {
        None,
        OneYear,
        ThreeYears,
        FiveYears
    }

    struct Amplifier {
        FuseProduct fuseProduct;
        address minter;
        uint256 created;
        uint256 expires;
        uint256 numClaims;
        uint256 lastClaimed;
        uint256 fused;
        uint256 unlocks;
        uint256 lastFuseClaimed;
    }

    struct AmplifierV2 {
        FuseProduct fuseProduct;
        address minter;
        uint16 numClaims;
        uint48 lastClaimed;
        uint48 created;
        uint48 expires;
        uint48 fused;
        uint48 unlocks;
    }

    struct AmplifierFeeRecipients {
        address operations;
        address validatorAcquisition;
        address developers;
    }

    struct Transistor {
        address minter;
        uint256 created;
        uint256 expires;
        uint256 numClaims;
        uint256 lastClaimed;
    }

    struct TransistorFeeRecipients {
        address creationFee;
        address creationTax;
        address renewalFee;
        address reverseFee;
        address claimFeeOperations;
        address claimFeeDevelopers;
    }

    struct Checkpoint {
        uint32 fromBlock;
        uint224 shares;
    }

    struct Pot {
        uint48 timestamp;
        uint208 value;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {Ownable} from "openzeppelin-contracts/access/Ownable.sol";
import {ReentrancyGuard} from "openzeppelin-contracts/security/ReentrancyGuard.sol";
import {ERC20, ERC20Permit, ERC20Votes, IERC20} from "openzeppelin-contracts/token/ERC20/extensions/ERC20Votes.sol";
import {EnumerableSet} from "openzeppelin-contracts/utils/structs/EnumerableSet.sol";

import {Types} from "./Types.sol";
import {IAmplifierV2} from "./interfaces/IAmplifierV2.sol";
import {INFT} from "./interfaces/INFT.sol";

/**
 * Amplifi
 * Website: https://perpetualyield.io/
 * Telegram: https://t.me/Amplifi_ERC
 * Twitter: https://twitter.com/amplifidefi
 */
contract gAMPV2 is ERC20, ERC20Permit, ERC20Votes, Ownable, ReentrancyGuard {
    using EnumerableSet for EnumerableSet.AddressSet;

    IAmplifierV2 public amplifierContract;
    INFT public nfts;

    mapping(address => mapping(uint256 => uint256)) public lastMintedFromAmplifier;
    mapping(Types.FuseProduct => uint256) public totalAmountToMintPerProduct;
    mapping(address => mapping(uint256 => bool)) public hasClaimedPeriod;
    mapping(uint256 => uint256) public potPerPeriod;

    EnumerableSet.AddressSet private teamAddresses;

    uint256 public mintFee = 0.001 ether;
    uint256 public lastPot;
    uint256 public receivedThisPeriod;

    address public mintFeeRecipient = 0x58c5a97c717cA3A7969F82D670A9b9FF16545C6F;
    address public claimFeeRecipient = 0xcbA2712e9Ef4E47690BB73ddF10af1Dc26080131;

    uint16 public claimFee = 300;
    // Basis for above fee values
    uint16 public constant bps = 10_000;

    event PotAccrued(uint256 potAmount);
    event Claimed(address indexed claimant, uint256 indexed potBlock, uint256 amount);

    constructor(IAmplifierV2 _amplifierContract, uint256 _lastPot) ERC20("gAMPV2", "gAMP") ERC20Permit("gAMPV2") {
        amplifierContract = _amplifierContract;
        lastPot = _lastPot;

        totalAmountToMintPerProduct[Types.FuseProduct.OneYear] = 125e15;
        totalAmountToMintPerProduct[Types.FuseProduct.ThreeYears] = 380e15;
        totalAmountToMintPerProduct[Types.FuseProduct.FiveYears] = 1000e15;

        address ops = 0x9f3717CDB4ab19da03845E8a86668BEA8bab840B;
        address dev = 0x3460E67b0c5740ef21E390E681b3160Be372a016;

        _mint(ops, 40 ether);
        _mint(dev, 20 ether);

        _delegate(ops, ops);
        _delegate(dev, dev);

        teamAddresses.add(ops);
        teamAddresses.add(dev);
    }

    function _afterTokenTransfer(address _from, address _to, uint256 _amount) internal override(ERC20, ERC20Votes) {
        super._afterTokenTransfer(_from, _to, _amount);
    }

    function _mint(address _to, uint256 _amount) internal override(ERC20, ERC20Votes) {
        super._mint(_to, _amount);
    }

    function _burn(address _account, uint256 _amount) internal override(ERC20, ERC20Votes) {
        super._burn(_account, _amount);
    }

    function mint(uint256[] calldata _ids) external payable nonReentrant {
        uint256 length = _ids.length;
        require(msg.value == mintFee * length, "Invalid Ether value provided");

        uint256 owed;

        for (uint256 i = 0; i < length;) {
            Types.AmplifierV2 memory amplifier = amplifierContract.amplifiers(_ids[i]);

            require(amplifier.minter == msg.sender, "Invalid ownership");
            require(amplifier.expires > block.timestamp, "Amplifier expired");
            require(amplifier.fuseProduct != Types.FuseProduct.None, "Must be fused");

            uint256 lastMintedFromThisAmplifier = lastMintedFromAmplifier[msg.sender][_ids[i]];

            // If they have fused again since last minting gAMP, we need to reset lastMintedFromAmplifier
            if (amplifier.fused >= lastMintedFromThisAmplifier) {
                lastMintedFromAmplifier[msg.sender][_ids[i]] = 0;
            }

            owed += getMintAmount(amplifier, lastMintedFromThisAmplifier);

            lastMintedFromAmplifier[msg.sender][_ids[i]] = block.timestamp;

            unchecked {
                ++i;
            }
        }

        require(owed > 0, "No gAMP owed");

        (bool success,) = mintFeeRecipient.call{value: msg.value}("");
        require(success, "Could not send ETH");

        _mint(msg.sender, owed);
        delegate(msg.sender);
    }

    function mintFromNFT(uint256 _amount) external nonReentrant {
        require(msg.sender == address(nfts), "Not the NFT contract");
        _mint(msg.sender, _amount);
        delegate(msg.sender);
    }

    function pot() external {
        require(block.timestamp >= lastPot + 30 days, "Cannot make a new pot too soon");

        lastPot = block.timestamp;
        potPerPeriod[block.number] = receivedThisPeriod;
        emit PotAccrued(receivedThisPeriod);

        receivedThisPeriod = 0;
    }

    function claim(uint256[] calldata _blockNumbers) external nonReentrant {
        require(!teamAddresses.contains(msg.sender), "Team addresses cannot claim");

        uint256 owed;

        uint256 length = _blockNumbers.length;
        for (uint256 i = 0; i < length;) {
            uint256 claimAmount = _claim(_blockNumbers[i]);
            emit Claimed(msg.sender, _blockNumbers[i], claimAmount);
            owed += claimAmount;
            unchecked {
                ++i;
            }
        }

        _claimPayments(owed);
    }

    function _claim(uint256 _blockNumber) internal returns (uint256) {
        require(!hasClaimedPeriod[msg.sender][_blockNumber], "Already claimied this period");
        hasClaimedPeriod[msg.sender][_blockNumber] = true;
        return getClaimAmount(_blockNumber);
    }

    function _claimPayments(uint256 owed) internal {
        require(owed > 0, "No ETH claimable");

        uint256 claimFeeAmount = (owed * claimFee) / bps;

        (bool success,) = claimFeeRecipient.call{value: claimFeeAmount}("");
        require(success, "Could not send ETH");

        owed -= claimFeeAmount;

        (success,) = msg.sender.call{value: owed}("");
        require(success, "Could not send ETH");
    }

    function getMintAmount(Types.AmplifierV2 memory _amplifier, uint256 _lastMintedFromThisAmplifier)
        public
        view
        returns (uint256)
    {
        uint256 end = (block.timestamp > _amplifier.unlocks) ? _amplifier.unlocks : block.timestamp;
        uint256 start = (_lastMintedFromThisAmplifier == 0) ? _amplifier.fused : _lastMintedFromThisAmplifier;

        uint256 numerator = end - start;
        uint256 denominator = _amplifier.unlocks - _amplifier.fused;

        return (totalAmountToMintPerProduct[_amplifier.fuseProduct] * numerator) / denominator;
    }

    function getClaimAmount(uint256 _blockNumber) public view returns (uint256) {
        return (potPerPeriod[_blockNumber] * getPastVotes(msg.sender, _blockNumber))
            / (getPastTotalSupply(_blockNumber) - getTeamTokens(_blockNumber));
    }

    function getTeamTokens(uint256 _blockNumber) public view returns (uint256) {
        uint256 teamTokens = 0;
        uint256 length = teamAddresses.length();

        for (uint256 i = 0; i < length;) {
            teamTokens += getPastVotes(teamAddresses.at(i), _blockNumber);

            unchecked {
                ++i;
            }
        }

        return teamTokens;
    }

    function gAMPOwed(uint256[] calldata _ids, address _minter) external view returns (uint256) {
        uint256 owed = 0;
        uint256 length = _ids.length;

        for (uint256 i = 0; i < length;) {
            Types.AmplifierV2 memory amplifier = amplifierContract.amplifiers(_ids[i]);
            require(amplifier.expires > block.timestamp, "Amplifier expired");
            require(amplifier.fuseProduct != Types.FuseProduct.None, "Must be fused");

            owed += getMintAmount(amplifier, lastMintedFromAmplifier[_minter][_ids[i]]);

            unchecked {
                ++i;
            }
        }
        return owed;
    }

    function ETHOwed(uint256[] memory _blockNumbers, address _claimant) public view returns (uint256) {
        uint256 owed = 0;
        for (uint256 i = 0; i < _blockNumbers.length;) {
            uint256 blockNumber = _blockNumbers[i];
            if (!hasClaimedPeriod[_claimant][blockNumber]) {
                owed += (potPerPeriod[blockNumber] * getPastVotes(_claimant, blockNumber))
                    / (getPastTotalSupply(blockNumber) - getTeamTokens(blockNumber));
            }

            unchecked {
                ++i;
            }
        }
        return owed;
    }

    function getTeamAddresses() external view returns (address[] memory) {
        return teamAddresses.values();
    }

    function setNFTs(INFT _nfts) external onlyOwner {
        nfts = _nfts;
    }

    function setFees(uint256 _mintFee, uint16 _claimFee) external onlyOwner {
        mintFee = _mintFee;
        claimFee = _claimFee;
    }

    function setTotalAmountToMintPerProduct(Types.FuseProduct _fuseProduct, uint256 _amount) external onlyOwner {
        totalAmountToMintPerProduct[_fuseProduct] = _amount;
    }

    function setFeeRecipients(address _mintFeeRecipient, address _claimFeeRecipient) external onlyOwner {
        mintFeeRecipient = _mintFeeRecipient;
        claimFeeRecipient = _claimFeeRecipient;
    }

    function setAmplifierContract(IAmplifierV2 _amplifierContract) external onlyOwner {
        amplifierContract = _amplifierContract;
    }

    function airdrop(address[] calldata _recipients, uint256[] calldata _amounts) external onlyOwner {
        require(_recipients.length == _amounts.length, "Lengths must match");
        uint256 length = _recipients.length;
        for (uint256 i = 0; i < length;) {
            _mint(_recipients[i], _amounts[i]);
            unchecked {
                ++i;
            }
        }
    }

    function addToTeamAddresses(address[] calldata _teamAddresses) external onlyOwner {
        uint256 length = _teamAddresses.length;
        for (uint256 i = 0; i < length;) {
            teamAddresses.add(_teamAddresses[i]);
            unchecked {
                ++i;
            }
        }
    }

    function removeFromTeamAddresses(address[] calldata _teamAddresses) external onlyOwner {
        uint256 length = _teamAddresses.length;
        for (uint256 i = 0; i < length;) {
            address teamAddress = _teamAddresses[i];
            require(teamAddresses.contains(teamAddress), "Not in set");
            teamAddresses.remove(_teamAddresses[i]);
            unchecked {
                ++i;
            }
        }
    }

    function withdrawETH(address _recipient) external onlyOwner {
        (bool success,) = _recipient.call{value: address(this).balance}("");
        require(success, "Could not send ETH");
    }

    function withdrawToken(IERC20 _token, address _recipient) external onlyOwner {
        _token.transfer(_recipient, _token.balanceOf(address(this)));
    }

    receive() external payable {
        receivedThisPeriod += msg.value;
    }

    function setHasClaimedPerPeriod(address[] calldata _claimants, uint256[] calldata _blockNumbers) external onlyOwner {
        require(_claimants.length == _blockNumbers.length, "Arrays must be same length");
        for (uint256 i = 0; i < _claimants.length; ) {
            hasClaimedPeriod[_claimants[i]][_blockNumbers[i]] = true;
            unchecked {
                ++i;
            }
        }
    }

    function setPotPerPeriod(uint256[] calldata _blockNumbers, uint256[] calldata _pots) external onlyOwner {
        require(_blockNumbers.length == _pots.length, "Arrays must be same length");
        for (uint256 i = 0; i < _blockNumbers.length; ) {
            potPerPeriod[_blockNumbers[i]] = _pots[i];
            unchecked {
                ++i;
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {Types} from "../Types.sol";

interface IAmplifierV2 {
    function amplifiers(uint256) external view returns (Types.AmplifierV2 memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {IERC721} from "openzeppelin-contracts/token/ERC721/IERC721.sol";

import {Types} from "../Types.sol";

interface INFT is IERC721 {
    // Returns the amount of gAMP due to the NFT
    function gAMP(uint256) external returns (uint256);
}

{
  "remappings": [
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/contracts/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IAmplifierV2","name":"_amplifierContract","type":"address"},{"internalType":"uint256","name":"_lastPot","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"claimant","type":"address"},{"indexed":true,"internalType":"uint256","name":"potBlock","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Claimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"delegator","type":"address"},{"indexed":true,"internalType":"address","name":"fromDelegate","type":"address"},{"indexed":true,"internalType":"address","name":"toDelegate","type":"address"}],"name":"DelegateChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"delegate","type":"address"},{"indexed":false,"internalType":"uint256","name":"previousBalance","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newBalance","type":"uint256"}],"name":"DelegateVotesChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"potAmount","type":"uint256"}],"name":"PotAccrued","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_blockNumbers","type":"uint256[]"},{"internalType":"address","name":"_claimant","type":"address"}],"name":"ETHOwed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"_teamAddresses","type":"address[]"}],"name":"addToTeamAddresses","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"_recipients","type":"address[]"},{"internalType":"uint256[]","name":"_amounts","type":"uint256[]"}],"name":"airdrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"amplifierContract","outputs":[{"internalType":"contract IAmplifierV2","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"bps","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint32","name":"pos","type":"uint32"}],"name":"checkpoints","outputs":[{"components":[{"internalType":"uint32","name":"fromBlock","type":"uint32"},{"internalType":"uint224","name":"votes","type":"uint224"}],"internalType":"struct ERC20Votes.Checkpoint","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_blockNumbers","type":"uint256[]"}],"name":"claim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimFee","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimFeeRecipient","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"delegatee","type":"address"}],"name":"delegate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"delegatee","type":"address"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"uint256","name":"expiry","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"delegateBySig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"delegates","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_ids","type":"uint256[]"},{"internalType":"address","name":"_minter","type":"address"}],"name":"gAMPOwed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_blockNumber","type":"uint256"}],"name":"getClaimAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"enum Types.FuseProduct","name":"fuseProduct","type":"uint8"},{"internalType":"address","name":"minter","type":"address"},{"internalType":"uint16","name":"numClaims","type":"uint16"},{"internalType":"uint48","name":"lastClaimed","type":"uint48"},{"internalType":"uint48","name":"created","type":"uint48"},{"internalType":"uint48","name":"expires","type":"uint48"},{"internalType":"uint48","name":"fused","type":"uint48"},{"internalType":"uint48","name":"unlocks","type":"uint48"}],"internalType":"struct Types.AmplifierV2","name":"_amplifier","type":"tuple"},{"internalType":"uint256","name":"_lastMintedFromThisAmplifier","type":"uint256"}],"name":"getMintAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"blockNumber","type":"uint256"}],"name":"getPastTotalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"blockNumber","type":"uint256"}],"name":"getPastVotes","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTeamAddresses","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_blockNumber","type":"uint256"}],"name":"getTeamTokens","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"getVotes","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"hasClaimedPeriod","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"lastMintedFromAmplifier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastPot","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_ids","type":"uint256[]"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"mintFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mintFeeRecipient","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mintFromNFT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nfts","outputs":[{"internalType":"contract INFT","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"numCheckpoints","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"pot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"potPerPeriod","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"receivedThisPeriod","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"_teamAddresses","type":"address[]"}],"name":"removeFromTeamAddresses","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IAmplifierV2","name":"_amplifierContract","type":"address"}],"name":"setAmplifierContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_mintFeeRecipient","type":"address"},{"internalType":"address","name":"_claimFeeRecipient","type":"address"}],"name":"setFeeRecipients","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_mintFee","type":"uint256"},{"internalType":"uint16","name":"_claimFee","type":"uint16"}],"name":"setFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"_claimants","type":"address[]"},{"internalType":"uint256[]","name":"_blockNumbers","type":"uint256[]"}],"name":"setHasClaimedPerPeriod","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract INFT","name":"_nfts","type":"address"}],"name":"setNFTs","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_blockNumbers","type":"uint256[]"},{"internalType":"uint256[]","name":"_pots","type":"uint256[]"}],"name":"setPotPerPeriod","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"enum Types.FuseProduct","name":"_fuseProduct","type":"uint8"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"setTotalAmountToMintPerProduct","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"enum Types.FuseProduct","name":"","type":"uint8"}],"name":"totalAmountToMintPerProduct","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_recipient","type":"address"}],"name":"withdrawETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_token","type":"address"},{"internalType":"address","name":"_recipient","type":"address"}],"name":"withdrawToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

61014060405266038d7ea4c68000601455601780546001600160a01b0319167358c5a97c717ca3a7969f82d670a9b9ff16545c6f1790556018805475012ccba2712e9ef4e47690bb73ddf10af1dc260801316001600160b01b03199091161790553480156200006d57600080fd5b5060405162004ca138038062004ca1833981016040819052620000909162000a6d565b6040518060400160405280600681526020016533a0a6a82b1960d11b81525080604051806040016040528060018152602001603160f81b8152506040518060400160405280600681526020016533a0a6a82b1960d11b81525060405180604001604052806004815260200163067414d560e41b815250816003908162000117919062000b4d565b50600462000126828262000b4d565b5050825160209384012082519284019290922060e08390526101008190524660a0818152604080517f8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f818901819052818301979097526060810194909452608080850193909352308483018190528151808603909301835260c0948501909152815191909601209052929092526101205250620001c590503362000323565b6001600b55600c80546001600160a01b0319166001600160a01b0384161790556015819055600f6020526701bc16d674ec80007f169f97de0d9a84d840042b17d3c6b9638b3d6fd9024c9eb0c7a306a17b49f88f5567054607fc96a600007fa74ba3945261e09fde15ba3db55005b205e61eeb4ad811ac0faa2b315bffeead556003600052670de0b6b3a76400007f45f76dafbbad695564362934e24d72eedc57f9fc1a65f39bca62176cc829682855739f3717cdb4ab19da03845e8a86668bea8bab840b733460e67b0c5740ef21e390e681b3160be372a016620002b48268022b1c8c1227a0000062000375565b620002c9816801158e460913d0000062000375565b620002d5828062000390565b620002e1818062000390565b620002fc8260126200041160201b6200230b1790919060201c565b50620003188160126200041160201b6200230b1790919060201c565b505050505062000c71565b600a80546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b6200038c82826200043160201b620023201760201c565b5050565b6001600160a01b038281166000818152600760208181526040808420805485845282862054949093528787166001600160a01b03198416811790915590519190951694919391928592917f3134e8a2e6d97e929a7e54011ea5485d7d196dd5f0ba4d4ef95803e8e3fc257f9190a46200040b828483620004e2565b50505050565b600062000428836001600160a01b0384166200061e565b90505b92915050565b6200044882826200067060201b620023aa1760201c565b6001600160e01b036200045c6200075f8216565b1115620004c95760405162461bcd60e51b815260206004820152603060248201527f4552433230566f7465733a20746f74616c20737570706c79207269736b73206f60448201526f766572666c6f77696e6720766f74657360801b60648201526084015b60405180910390fd5b6200040b6009620024916200076560201b178362000773565b816001600160a01b0316836001600160a01b031614158015620005055750600081115b1562000619576001600160a01b0383161562000592576001600160a01b0383166000908152600860209081526040822082916200054f919062000925901b6200249d178562000773565b91509150846001600160a01b031660008051602062004c81833981519152838360405162000587929190918252602082015260400190565b60405180910390a250505b6001600160a01b0382161562000619576001600160a01b038216600090815260086020908152604082208291620005d6919062000765901b62002491178562000773565b91509150836001600160a01b031660008051602062004c8183398151915283836040516200060e929190918252602082015260400190565b60405180910390a250505b505050565b600081815260018301602052604081205462000667575081546001818101845560008481526020808220909301849055845484825282860190935260409020919091556200042b565b5060006200042b565b6001600160a01b038216620006c85760405162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f2061646472657373006044820152606401620004c0565b8060026000828254620006dc919062000c2f565b90915550506001600160a01b038216600090815260208190526040812080548392906200070b90849062000c2f565b90915550506040518181526001600160a01b038316906000907fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9060200160405180910390a36200038c6000838362000933565b60025490565b600062000428828462000c2f565b825460009081908015620007c557856200078f60018362000c45565b81548110620007a257620007a262000c5b565b60009182526020909120015464010000000090046001600160e01b0316620007c8565b60005b6001600160e01b03169250620007df83858760201c565b91506000811180156200082357504386620007fc60018462000c45565b815481106200080f576200080f62000c5b565b60009182526020909120015463ffffffff16145b1562000897576200083f826200094b60201b620024a91760201c565b866200084d60018462000c45565b8154811062000860576200086062000c5b565b9060005260206000200160000160046101000a8154816001600160e01b0302191690836001600160e01b031602179055506200091c565b856040518060400160405280620008b943620009ba60201b620025161760201c565b63ffffffff168152602001620008da856200094b60201b620024a91760201c565b6001600160e01b0390811690915282546001810184556000938452602093849020835194909301519091166401000000000263ffffffff909316929092179101555b50935093915050565b600062000428828462000c45565b6200061983838362000a2160201b6200257b1760201c565b60006001600160e01b03821115620009b65760405162461bcd60e51b815260206004820152602760248201527f53616665436173743a2076616c756520646f65736e27742066697420696e20326044820152663234206269747360c81b6064820152608401620004c0565b5090565b600063ffffffff821115620009b65760405162461bcd60e51b815260206004820152602660248201527f53616665436173743a2076616c756520646f65736e27742066697420696e203360448201526532206269747360d01b6064820152608401620004c0565b62000a398383836200061960201b62000faf1760201c565b6001600160a01b038381166000908152600760205260408082205485841683529120546200061992918216911683620004e2565b6000806040838503121562000a8157600080fd5b82516001600160a01b038116811462000a9957600080fd5b6020939093015192949293505050565b634e487b7160e01b600052604160045260246000fd5b600181811c9082168062000ad457607f821691505b60208210810362000af557634e487b7160e01b600052602260045260246000fd5b50919050565b601f8211156200061957600081815260208120601f850160051c8101602086101562000b245750805b601f850160051c820191505b8181101562000b455782815560010162000b30565b505050505050565b81516001600160401b0381111562000b695762000b6962000aa9565b62000b818162000b7a845462000abf565b8462000afb565b602080601f83116001811462000bb9576000841562000ba05750858301515b600019600386901b1c1916600185901b17855562000b45565b600085815260208120601f198616915b8281101562000bea5788860151825594840194600190910190840162000bc9565b508582101562000c095787850151600019600388901b60f8161c191681555b5050505050600190811b01905550565b634e487b7160e01b600052601160045260246000fd5b808201808211156200042b576200042b62000c19565b818103818111156200042b576200042b62000c19565b634e487b7160e01b600052603260045260246000fd5b60805160a05160c05160e0516101005161012051613fc062000cc16000396000612a3401526000612a8301526000612a5e015260006129b7015260006129e101526000612a0b0152613fc06000f3fe60806040526004361061039b5760003560e01c8063765b0c36116101dc578063bbc77eac11610102578063d682554c116100a0578063f1127ed81161006f578063f1127ed814610b4f578063f27ee76c14610b99578063f2fde38b14610baf578063f8e93ef914610bcf57600080fd5b8063d682554c14610ac2578063dd62ed3e14610ae2578063e164a55714610b02578063efdcc0f814610b2f57600080fd5b8063c6cabb40116100dc578063c6cabb4014610a42578063cef6360014610a62578063d354765a14610a82578063d505accf14610aa257600080fd5b8063bbc77eac146109ec578063c3cda52014610a0c578063c5cda09614610a2c57600080fd5b806395d89b411161017a578063a51d2bb411610149578063a51d2bb414610954578063a753330a14610974578063a9059cbb146109ac578063afd73fa1146109cc57600080fd5b806395d89b41146108dd57806399d32fc4146108f25780639ab24eb014610914578063a457c2d71461093457600080fd5b80637ecebe00116101b65780637ecebe001461085d57806389e527711461087d5780638da5cb5b1461089f5780638e539e8c146108bd57600080fd5b8063765b0c36146107fd57806379448fcc1461081d5780637c5e62d01461083d57600080fd5b80633aeac4e1116102c1578063672434821161025f5780636fcfff451161022e5780636fcfff451461075d57806370a0823114610792578063714210bc146107c8578063715018a6146107e857600080fd5b806367243482146106d457806368237329146106f4578063690d83201461071d5780636ba4c1381461073d57600080fd5b8063587cde1e1161029b578063587cde1e146106205780635c19a95c1461065957806363027bdf1461067957806364a673b71461069957600080fd5b80633aeac4e1146105cb5780634ba2363a146105eb578063565dd4561461060057600080fd5b806323b872dd11610339578063359a5f7f11610308578063359a5f7f146105495780633644e51514610576578063395093511461058b5780633a46b1a8146105ab57600080fd5b806323b872dd146104cd57806326f73351146104ed5780632995c8641461050d578063313ce5671461052d57600080fd5b806313966db51161037557806313966db51461043c5780631714f2e01461046057806318160ddd1461049857806322e14ede146104ad57600080fd5b806306fdde03146103bf578063095ea7b3146103ea5780630d67eb151461041a57600080fd5b366103ba5734601660008282546103b2919061367a565b925050819055005b600080fd5b3480156103cb57600080fd5b506103d4610be2565b6040516103e1919061368d565b60405180910390f35b3480156103f657600080fd5b5061040a610405366004613700565b610c74565b60405190151581526020016103e1565b34801561042657600080fd5b5061043a610435366004613778565b610c8e565b005b34801561044857600080fd5b5061045260145481565b6040519081526020016103e1565b34801561046c57600080fd5b50600d54610480906001600160a01b031681565b6040516001600160a01b0390911681526020016103e1565b3480156104a457600080fd5b50600254610452565b3480156104b957600080fd5b5061043a6104c83660046137ba565b610d58565b3480156104d957600080fd5b5061040a6104e83660046137d7565b610d82565b3480156104f957600080fd5b5061043a610508366004613833565b610da6565b34801561051957600080fd5b5061043a610528366004613870565b610dd6565b34801561053957600080fd5b50604051601281526020016103e1565b34801561055557600080fd5b5061045261056436600461388e565b60116020526000908152604090205481565b34801561058257600080fd5b50610452610e1b565b34801561059757600080fd5b5061040a6105a6366004613700565b610e2a565b3480156105b757600080fd5b506104526105c6366004613700565b610e4c565b3480156105d757600080fd5b5061043a6105e63660046138a7565b610ec6565b3480156105f757600080fd5b5061043a610fb4565b34801561060c57600080fd5b5061043a61061b366004613778565b61106d565b34801561062c57600080fd5b5061048061063b3660046137ba565b6001600160a01b039081166000908152600760205260409020541690565b34801561066557600080fd5b5061043a6106743660046137ba565b6110bc565b34801561068557600080fd5b5061043a61069436600461388e565b6110c9565b3480156106a557600080fd5b5061040a6106b4366004613700565b601060209081526000928352604080842090915290825290205460ff1681565b3480156106e057600080fd5b5061043a6106ef3660046138d5565b61115c565b34801561070057600080fd5b5061070a61271081565b60405161ffff90911681526020016103e1565b34801561072957600080fd5b5061043a6107383660046137ba565b61120c565b34801561074957600080fd5b5061043a610758366004613778565b61128b565b34801561076957600080fd5b5061077d6107783660046137ba565b6113c2565b60405163ffffffff90911681526020016103e1565b34801561079e57600080fd5b506104526107ad3660046137ba565b6001600160a01b031660009081526020819052604090205490565b3480156107d457600080fd5b5061043a6107e33660046138d5565b6113e4565b3480156107f457600080fd5b5061043a61149e565b34801561080957600080fd5b50601754610480906001600160a01b031681565b34801561082957600080fd5b5061043a6108383660046138d5565b6114b2565b34801561084957600080fd5b50601854610480906001600160a01b031681565b34801561086957600080fd5b506104526108783660046137ba565b6115a5565b34801561088957600080fd5b506108926115c3565b6040516103e19190613941565b3480156108ab57600080fd5b50600a546001600160a01b0316610480565b3480156108c957600080fd5b506104526108d836600461388e565b6115cf565b3480156108e957600080fd5b506103d461162b565b3480156108fe57600080fd5b5060185461070a90600160a01b900461ffff1681565b34801561092057600080fd5b5061045261092f3660046137ba565b61163a565b34801561094057600080fd5b5061040a61094f366004613700565b6116c1565b34801561096057600080fd5b5061045261096f3660046139ff565b61173c565b34801561098057600080fd5b5061045261098f366004613700565b600e60209081526000928352604080842090915290825290205481565b3480156109b857600080fd5b5061040a6109c7366004613700565b6117fe565b3480156109d857600080fd5b506104526109e7366004613ab7565b61180c565b3480156109f857600080fd5b50600c54610480906001600160a01b031681565b348015610a1857600080fd5b5061043a610a27366004613b1f565b6119b6565b348015610a3857600080fd5b5061045260165481565b348015610a4e57600080fd5b5061043a610a5d3660046138a7565b611aec565b348015610a6e57600080fd5b50610452610a7d36600461388e565b611b22565b348015610a8e57600080fd5b50610452610a9d366004613b98565b611b6d565b348015610aae57600080fd5b5061043a610abd366004613c56565b611c40565b348015610ace57600080fd5b5061043a610add3660046137ba565b611da4565b348015610aee57600080fd5b50610452610afd3660046138a7565b611dce565b348015610b0e57600080fd5b50610452610b1d366004613cc4565b600f6020526000908152604090205481565b348015610b3b57600080fd5b50610452610b4a36600461388e565b611df9565b348015610b5b57600080fd5b50610b6f610b6a366004613ce1565b611e45565b60408051825163ffffffff1681526020928301516001600160e01b031692810192909252016103e1565b348015610ba557600080fd5b5061045260155481565b348015610bbb57600080fd5b5061043a610bca3660046137ba565b611ec9565b61043a610bdd366004613778565b611f3f565b606060038054610bf190613d18565b80601f0160208091040260200160405190810160405280929190818152602001828054610c1d90613d18565b8015610c6a5780601f10610c3f57610100808354040283529160200191610c6a565b820191906000526020600020905b815481529060010190602001808311610c4d57829003601f168201915b5050505050905090565b600033610c828185856125ad565b60019150505b92915050565b610c966126d1565b8060005b81811015610d52576000848483818110610cb657610cb6613d4c565b9050602002016020810190610ccb91906137ba565b9050610cd860128261272b565b610d165760405162461bcd60e51b815260206004820152600a602482015269139bdd081a5b881cd95d60b21b60448201526064015b60405180910390fd5b610d48858584818110610d2b57610d2b613d4c565b9050602002016020810190610d4091906137ba565b60129061274d565b5050600101610c9a565b50505050565b610d606126d1565b600d80546001600160a01b0319166001600160a01b0392909216919091179055565b600033610d90858285612762565b610d9b8585856127d6565b506001949350505050565b610dae6126d1565b6014919091556018805461ffff909216600160a01b0261ffff60a01b19909216919091179055565b610dde6126d1565b80600f6000846003811115610df557610df5613d62565b6003811115610e0657610e06613d62565b81526020810191909152604001600020555050565b6000610e256129aa565b905090565b600033610c82818585610e3d8383611dce565b610e47919061367a565b6125ad565b6000438210610e9d5760405162461bcd60e51b815260206004820152601f60248201527f4552433230566f7465733a20626c6f636b206e6f7420796574206d696e6564006044820152606401610d0d565b6001600160a01b0383166000908152600860205260409020610ebf9083612ad1565b9392505050565b610ece6126d1565b6040516370a0823160e01b81523060048201526001600160a01b0383169063a9059cbb90839083906370a0823190602401602060405180830381865afa158015610f1c573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190610f409190613d78565b6040516001600160e01b031960e085901b1681526001600160a01b03909216600483015260248201526044016020604051808303816000875af1158015610f8b573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190610faf9190613d91565b505050565b601554610fc49062278d0061367a565b4210156110135760405162461bcd60e51b815260206004820152601e60248201527f43616e6e6f74206d616b652061206e657720706f7420746f6f20736f6f6e00006044820152606401610d0d565b426015556016544360009081526011602052604090819020829055517f54390daa7a4eaa8ded41401c920f8ae34737125099853ad55d28699819f2596b9161105e9190815260200190565b60405180910390a16000601655565b6110756126d1565b8060005b81811015610d52576110b384848381811061109657611096613d4c565b90506020020160208101906110ab91906137ba565b60129061230b565b50600101611079565b6110c63382612b8e565b50565b6002600b54036110eb5760405162461bcd60e51b8152600401610d0d90613db3565b6002600b55600d546001600160a01b031633146111415760405162461bcd60e51b8152602060048201526014602482015273139bdd081d1a19481391950818dbdb9d1c9858dd60621b6044820152606401610d0d565b61114b3382612c07565b611154336110bc565b506001600b55565b6111646126d1565b8281146111a85760405162461bcd60e51b8152602060048201526012602482015271098cadccee8d0e640daeae6e840dac2e8c6d60731b6044820152606401610d0d565b8260005b81811015611204576111fc8686838181106111c9576111c9613d4c565b90506020020160208101906111de91906137ba565b8585848181106111f0576111f0613d4c565b90506020020135612c07565b6001016111ac565b505050505050565b6112146126d1565b6000816001600160a01b03164760405160006040518083038185875af1925050503d8060008114611261576040519150601f19603f3d011682016040523d82523d6000602084013e611266565b606091505b50509050806112875760405162461bcd60e51b8152600401610d0d90613dea565b5050565b6002600b54036112ad5760405162461bcd60e51b8152600401610d0d90613db3565b6002600b556112bd60123361272b565b1561130a5760405162461bcd60e51b815260206004820152601b60248201527f5465616d206164647265737365732063616e6e6f7420636c61696d00000000006044820152606401610d0d565b600081815b818110156113ad57600061133a86868481811061132e5761132e613d4c565b90506020020135612c11565b905085858381811061134e5761134e613d4c565b90506020020135336001600160a01b03167f987d620f307ff6b94d58743cb7a7509f24071586a77759b77c2d4e29f75a2f9a8360405161139091815260200190565b60405180910390a36113a2818561367a565b93505060010161130f565b506113b782612caa565b50506001600b555050565b6001600160a01b038116600090815260086020526040812054610c8890612516565b6113ec6126d1565b82811461143b5760405162461bcd60e51b815260206004820152601a60248201527f417272617973206d7573742062652073616d65206c656e6774680000000000006044820152606401610d0d565b60005b838110156114975782828281811061145857611458613d4c565b905060200201356011600087878581811061147557611475613d4c565b602090810292909201358352508101919091526040016000205560010161143e565b5050505050565b6114a66126d1565b6114b06000612e03565b565b6114ba6126d1565b8281146115095760405162461bcd60e51b815260206004820152601a60248201527f417272617973206d7573742062652073616d65206c656e6774680000000000006044820152606401610d0d565b60005b838110156114975760016010600087878581811061152c5761152c613d4c565b905060200201602081019061154191906137ba565b6001600160a01b03166001600160a01b03168152602001908152602001600020600085858581811061157557611575613d4c565b60209081029290920135835250810191909152604001600020805460ff191691151591909117905560010161150c565b6001600160a01b038116600090815260056020526040812054610c88565b6060610e256012612e55565b60004382106116205760405162461bcd60e51b815260206004820152601f60248201527f4552433230566f7465733a20626c6f636b206e6f7420796574206d696e6564006044820152606401610d0d565b610c88600983612ad1565b606060048054610bf190613d18565b6001600160a01b03811660009081526008602052604081205480156116ae576001600160a01b038316600090815260086020526040902061167c600183613e16565b8154811061168c5761168c613d4c565b60009182526020909120015464010000000090046001600160e01b03166116b1565b60005b6001600160e01b03169392505050565b600033816116cf8286611dce565b90508381101561172f5760405162461bcd60e51b815260206004820152602560248201527f45524332303a2064656372656173656420616c6c6f77616e63652062656c6f77604482015264207a65726f60d81b6064820152608401610d0d565b610d9b82868684036125ad565b600080805b84518110156117f657600085828151811061175e5761175e613d4c565b6020908102919091018101516001600160a01b0387166000908152601083526040808220838352909352919091205490915060ff166117ed576117a081611df9565b6117a9826115cf565b6117b39190613e16565b6117bd8683610e4c565b6000838152601160205260409020546117d69190613e29565b6117e09190613e48565b6117ea908461367a565b92505b50600101611741565b509392505050565b600033610c828185856127d6565b60008083815b818110156119ab57600c546000906001600160a01b031663f9b1be7889898581811061184057611840613d4c565b905060200201356040518263ffffffff1660e01b815260040161186591815260200190565b61010060405180830381865afa158015611883573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906118a79190613e8b565b9050428160a0015165ffffffffffff16116118f85760405162461bcd60e51b8152602060048201526011602482015270105b5c1b1a599a595c88195e1c1a5c9959607a1b6044820152606401610d0d565b60008151600381111561190d5761190d613d62565b0361194a5760405162461bcd60e51b815260206004820152600d60248201526c135d5cdd08189948199d5cd959609a1b6044820152606401610d0d565b6001600160a01b0386166000908152600e60205260408120611996918391908b8b8781811061197b5761197b613d4c565b90506020020135815260200190815260200160002054611b6d565b6119a0908561367a565b935050600101611812565b509095945050505050565b83421115611a065760405162461bcd60e51b815260206004820152601d60248201527f4552433230566f7465733a207369676e617475726520657870697265640000006044820152606401610d0d565b604080517fe48329057bfd03d55e49b547132e39cffd9c1820ad7b9d4c5307691425d15adf60208201526001600160a01b038816918101919091526060810186905260808101859052600090611a8090611a789060a00160405160208183030381529060405280519060200120612e62565b858585612eb0565b9050611a8b81612ed8565b8614611ad95760405162461bcd60e51b815260206004820152601960248201527f4552433230566f7465733a20696e76616c6964206e6f6e6365000000000000006044820152606401610d0d565b611ae38188612b8e565b50505050505050565b611af46126d1565b601780546001600160a01b039384166001600160a01b03199182161790915560188054929093169116179055565b6000611b2d82611df9565b611b36836115cf565b611b409190613e16565b611b4a3384610e4c565b600084815260116020526040902054611b639190613e29565b610c889190613e48565b6000808360e0015165ffffffffffff164211611b895742611b97565b8360e0015165ffffffffffff165b905060008315611ba75783611bb5565b8460c0015165ffffffffffff165b90506000611bc38284613e16565b905060008660c001518760e00151611bdb9190613f55565b65ffffffffffff1690508082600f60008a600001516003811115611c0157611c01613d62565b6003811115611c1257611c12613d62565b815260200190815260200160002054611c2b9190613e29565b611c359190613e48565b979650505050505050565b83421115611c905760405162461bcd60e51b815260206004820152601d60248201527f45524332305065726d69743a206578706972656420646561646c696e650000006044820152606401610d0d565b60007f6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9888888611cbf8c612ed8565b6040805160208101969096526001600160a01b0394851690860152929091166060840152608083015260a082015260c0810186905260e0016040516020818303038152906040528051906020012090506000611d1a82612e62565b90506000611d2a82878787612eb0565b9050896001600160a01b0316816001600160a01b031614611d8d5760405162461bcd60e51b815260206004820152601e60248201527f45524332305065726d69743a20696e76616c6964207369676e617475726500006044820152606401610d0d565b611d988a8a8a6125ad565b50505050505050505050565b611dac6126d1565b600c80546001600160a01b0319166001600160a01b0392909216919091179055565b6001600160a01b03918216600090815260016020908152604080832093909416825291909152205490565b60008080611e076012612f00565b905060005b81811015611e3c57611e28611e22601283612f0a565b86610e4c565b611e32908461367a565b9250600101611e0c565b50909392505050565b60408051808201909152600080825260208201526001600160a01b0383166000908152600860205260409020805463ffffffff8416908110611e8957611e89613d4c565b60009182526020918290206040805180820190915291015463ffffffff8116825264010000000090046001600160e01b0316918101919091529392505050565b611ed16126d1565b6001600160a01b038116611f365760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b6064820152608401610d0d565b6110c681612e03565b6002600b5403611f615760405162461bcd60e51b8152600401610d0d90613db3565b6002600b556014548190611f76908290613e29565b3414611fc45760405162461bcd60e51b815260206004820152601c60248201527f496e76616c69642045746865722076616c75652070726f7669646564000000006044820152606401610d0d565b6000805b8281101561223957600c546000906001600160a01b031663f9b1be78878785818110611ff657611ff6613d4c565b905060200201356040518263ffffffff1660e01b815260040161201b91815260200190565b61010060405180830381865afa158015612039573d6000803e3d6000fd5b505050506040513d601f19601f8201168201806040525081019061205d9190613e8b565b60208101519091506001600160a01b031633146120b05760405162461bcd60e51b81526020600482015260116024820152700496e76616c6964206f776e65727368697607c1b6044820152606401610d0d565b428160a0015165ffffffffffff16116120ff5760405162461bcd60e51b8152602060048201526011602482015270105b5c1b1a599a595c88195e1c1a5c9959607a1b6044820152606401610d0d565b60008151600381111561211457612114613d62565b036121515760405162461bcd60e51b815260206004820152600d60248201526c135d5cdd08189948199d5cd959609a1b6044820152606401610d0d565b336000908152600e602052604081208188888681811061217357612173613d4c565b905060200201358152602001908152602001600020549050808260c0015165ffffffffffff16106121da57336000908152600e60205260408120818989878181106121c0576121c0613d4c565b905060200201358152602001908152602001600020819055505b6121e48282611b6d565b6121ee908561367a565b336000908152600e6020526040812091955042919089898781811061221557612215613d4c565b60209081029290920135835250810191909152604001600020555050600101611fc8565b50600081116122795760405162461bcd60e51b815260206004820152600c60248201526b139bc819d05354081bddd95960a21b6044820152606401610d0d565b6017546040516000916001600160a01b03169034908381818185875af1925050503d80600081146122c6576040519150601f19603f3d011682016040523d82523d6000602084013e6122cb565b606091505b50509050806122ec5760405162461bcd60e51b8152600401610d0d90613dea565b6122f63383612c07565b6122ff336110bc565b50506001600b55505050565b6000610ebf836001600160a01b038416612f16565b61232a82826123aa565b6002546001600160e01b03101561239c5760405162461bcd60e51b815260206004820152603060248201527f4552433230566f7465733a20746f74616c20737570706c79207269736b73206f60448201526f766572666c6f77696e6720766f74657360801b6064820152608401610d0d565b610d52600961249183612f65565b6001600160a01b0382166124005760405162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f2061646472657373006044820152606401610d0d565b8060026000828254612412919061367a565b90915550506001600160a01b0382166000908152602081905260408120805483929061243f90849061367a565b90915550506040518181526001600160a01b038316906000907fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9060200160405180910390a3611287600083836130de565b6000610ebf828461367a565b6000610ebf8284613e16565b60006001600160e01b038211156125125760405162461bcd60e51b815260206004820152602760248201527f53616665436173743a2076616c756520646f65736e27742066697420696e20326044820152663234206269747360c81b6064820152608401610d0d565b5090565b600063ffffffff8211156125125760405162461bcd60e51b815260206004820152602660248201527f53616665436173743a2076616c756520646f65736e27742066697420696e203360448201526532206269747360d01b6064820152608401610d0d565b6001600160a01b03838116600090815260076020526040808220548584168352912054610faf929182169116836130e9565b6001600160a01b03831661260f5760405162461bcd60e51b8152602060048201526024808201527f45524332303a20617070726f76652066726f6d20746865207a65726f206164646044820152637265737360e01b6064820152608401610d0d565b6001600160a01b0382166126705760405162461bcd60e51b815260206004820152602260248201527f45524332303a20617070726f766520746f20746865207a65726f206164647265604482015261737360f01b6064820152608401610d0d565b6001600160a01b0383811660008181526001602090815260408083209487168084529482529182902085905590518481527f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925910160405180910390a3505050565b600a546001600160a01b031633146114b05760405162461bcd60e51b815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e65726044820152606401610d0d565b6001600160a01b03811660009081526001830160205260408120541515610ebf565b6000610ebf836001600160a01b038416613226565b600061276e8484611dce565b90506000198114610d5257818110156127c95760405162461bcd60e51b815260206004820152601d60248201527f45524332303a20696e73756666696369656e7420616c6c6f77616e63650000006044820152606401610d0d565b610d5284848484036125ad565b6001600160a01b03831661283a5760405162461bcd60e51b815260206004820152602560248201527f45524332303a207472616e736665722066726f6d20746865207a65726f206164604482015264647265737360d81b6064820152608401610d0d565b6001600160a01b03821661289c5760405162461bcd60e51b815260206004820152602360248201527f45524332303a207472616e7366657220746f20746865207a65726f206164647260448201526265737360e81b6064820152608401610d0d565b6001600160a01b038316600090815260208190526040902054818110156129145760405162461bcd60e51b815260206004820152602660248201527f45524332303a207472616e7366657220616d6f756e7420657863656564732062604482015265616c616e636560d01b6064820152608401610d0d565b6001600160a01b0380851660009081526020819052604080822085850390559185168152908120805484929061294b90849061367a565b92505081905550826001600160a01b0316846001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef8460405161299791815260200190565b60405180910390a3610d528484846130de565b6000306001600160a01b037f000000000000000000000000000000000000000000000000000000000000000016148015612a0357507f000000000000000000000000000000000000000000000000000000000000000046145b15612a2d57507f000000000000000000000000000000000000000000000000000000000000000090565b50604080517f00000000000000000000000000000000000000000000000000000000000000006020808301919091527f0000000000000000000000000000000000000000000000000000000000000000828401527f000000000000000000000000000000000000000000000000000000000000000060608301524660808301523060a0808401919091528351808403909101815260c0909201909252805191012090565b8154600090815b81811015612b35576000612aec8284613320565b905084868281548110612b0157612b01613d4c565b60009182526020909120015463ffffffff161115612b2157809250612b2f565b612b2c81600161367a565b91505b50612ad8565b8115612b795784612b47600184613e16565b81548110612b5757612b57613d4c565b60009182526020909120015464010000000090046001600160e01b0316612b7c565b60005b6001600160e01b031695945050505050565b6001600160a01b038281166000818152600760208181526040808420805485845282862054949093528787166001600160a01b03198416811790915590519190951694919391928592917f3134e8a2e6d97e929a7e54011ea5485d7d196dd5f0ba4d4ef95803e8e3fc257f9190a4610d528284836130e9565b6112878282612320565b33600090815260106020908152604080832084845290915281205460ff1615612c7c5760405162461bcd60e51b815260206004820152601c60248201527f416c726561647920636c61696d696564207468697320706572696f64000000006044820152606401610d0d565b3360009081526010602090815260408083208584529091529020805460ff19166001179055610c8882611b22565b60008111612ced5760405162461bcd60e51b815260206004820152601060248201526f4e6f2045544820636c61696d61626c6560801b6044820152606401610d0d565b60185460009061271090612d0c90600160a01b900461ffff1684613e29565b612d169190613e48565b6018546040519192506000916001600160a01b039091169083908381818185875af1925050503d8060008114612d68576040519150601f19603f3d011682016040523d82523d6000602084013e612d6d565b606091505b5050905080612d8e5760405162461bcd60e51b8152600401610d0d90613dea565b612d988284613e16565b60405190935033908490600081818185875af1925050503d8060008114612ddb576040519150601f19603f3d011682016040523d82523d6000602084013e612de0565b606091505b50508091505080610faf5760405162461bcd60e51b8152600401610d0d90613dea565b600a80546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b60606000610ebf8361333b565b6000610c88612e6f6129aa565b8360405161190160f01b6020820152602281018390526042810182905260009060620160405160208183030381529060405280519060200120905092915050565b6000806000612ec187878787613397565b91509150612ece81613484565b5095945050505050565b6001600160a01b03811660009081526005602052604090208054600181018255905b50919050565b6000610c88825490565b6000610ebf838361363a565b6000818152600183016020526040812054612f5d57508154600181810184556000848152602080822090930184905584548482528286019093526040902091909155610c88565b506000610c88565b825460009081908015612fb05785612f7e600183613e16565b81548110612f8e57612f8e613d4c565b60009182526020909120015464010000000090046001600160e01b0316612fb3565b60005b6001600160e01b03169250612fcc83858763ffffffff16565b915060008111801561300a57504386612fe6600184613e16565b81548110612ff657612ff6613d4c565b60009182526020909120015463ffffffff16145b1561306a57613018826124a9565b86613024600184613e16565b8154811061303457613034613d4c565b9060005260206000200160000160046101000a8154816001600160e01b0302191690836001600160e01b031602179055506130d5565b85604051806040016040528061307f43612516565b63ffffffff168152602001613093856124a9565b6001600160e01b0390811690915282546001810184556000938452602093849020835194909301519091166401000000000263ffffffff909316929092179101555b50935093915050565b610faf83838361257b565b816001600160a01b0316836001600160a01b03161415801561310b5750600081115b15610faf576001600160a01b03831615613199576001600160a01b038316600090815260086020526040812081906131469061249d85612f65565b91509150846001600160a01b03167fdec2bacdd2f05b59de34da9b523dff8be42e5e38e818c82fdb0bae774387a724838360405161318e929190918252602082015260400190565b60405180910390a250505b6001600160a01b03821615610faf576001600160a01b038216600090815260086020526040812081906131cf9061249185612f65565b91509150836001600160a01b03167fdec2bacdd2f05b59de34da9b523dff8be42e5e38e818c82fdb0bae774387a7248383604051613217929190918252602082015260400190565b60405180910390a25050505050565b6000818152600183016020526040812054801561330f57600061324a600183613e16565b855490915060009061325e90600190613e16565b90508181146132c357600086600001828154811061327e5761327e613d4c565b90600052602060002001549050808760000184815481106132a1576132a1613d4c565b6000918252602080832090910192909255918252600188019052604090208390555b85548690806132d4576132d4613f74565b600190038181906000526020600020016000905590558560010160008681526020019081526020016000206000905560019350505050610c88565b6000915050610c88565b5092915050565b600061332f6002848418613e48565b610ebf9084841661367a565b60608160000180548060200260200160405190810160405280929190818152602001828054801561338b57602002820191906000526020600020905b815481526020019060010190808311613377575b50505050509050919050565b6000807f7fffffffffffffffffffffffffffffff5d576e7357a4501ddfe92f46681b20a08311156133ce575060009050600361347b565b8460ff16601b141580156133e657508460ff16601c14155b156133f7575060009050600461347b565b6040805160008082526020820180845289905260ff881692820192909252606081018690526080810185905260019060a0016020604051602081039080840390855afa15801561344b573d6000803e3d6000fd5b5050604051601f1901519150506001600160a01b0381166134745760006001925092505061347b565b9150600090505b94509492505050565b600081600481111561349857613498613d62565b036134a05750565b60018160048111156134b4576134b4613d62565b036135015760405162461bcd60e51b815260206004820152601860248201527f45434453413a20696e76616c6964207369676e617475726500000000000000006044820152606401610d0d565b600281600481111561351557613515613d62565b036135625760405162461bcd60e51b815260206004820152601f60248201527f45434453413a20696e76616c6964207369676e6174757265206c656e677468006044820152606401610d0d565b600381600481111561357657613576613d62565b036135ce5760405162461bcd60e51b815260206004820152602260248201527f45434453413a20696e76616c6964207369676e6174757265202773272076616c604482015261756560f01b6064820152608401610d0d565b60048160048111156135e2576135e2613d62565b036110c65760405162461bcd60e51b815260206004820152602260248201527f45434453413a20696e76616c6964207369676e6174757265202776272076616c604482015261756560f01b6064820152608401610d0d565b600082600001828154811061365157613651613d4c565b9060005260206000200154905092915050565b634e487b7160e01b600052601160045260246000fd5b80820180821115610c8857610c88613664565b600060208083528351808285015260005b818110156136ba5785810183015185820160400152820161369e565b506000604082860101526040601f19601f8301168501019250505092915050565b6001600160a01b03811681146110c657600080fd5b80356136fb816136db565b919050565b6000806040838503121561371357600080fd5b823561371e816136db565b946020939093013593505050565b60008083601f84011261373e57600080fd5b50813567ffffffffffffffff81111561375657600080fd5b6020830191508360208260051b850101111561377157600080fd5b9250929050565b6000806020838503121561378b57600080fd5b823567ffffffffffffffff8111156137a257600080fd5b6137ae8582860161372c565b90969095509350505050565b6000602082840312156137cc57600080fd5b8135610ebf816136db565b6000806000606084860312156137ec57600080fd5b83356137f7816136db565b92506020840135613807816136db565b929592945050506040919091013590565b61ffff811681146110c657600080fd5b80356136fb81613818565b6000806040838503121561384657600080fd5b82359150602083013561385881613818565b809150509250929050565b600481106110c657600080fd5b6000806040838503121561388357600080fd5b823561371e81613863565b6000602082840312156138a057600080fd5b5035919050565b600080604083850312156138ba57600080fd5b82356138c5816136db565b91506020830135613858816136db565b600080600080604085870312156138eb57600080fd5b843567ffffffffffffffff8082111561390357600080fd5b61390f8883890161372c565b9096509450602087013591508082111561392857600080fd5b506139358782880161372c565b95989497509550505050565b6020808252825182820181905260009190848201906040850190845b818110156139825783516001600160a01b03168352928401929184019160010161395d565b50909695505050505050565b634e487b7160e01b600052604160045260246000fd5b604051610100810167ffffffffffffffff811182821017156139c8576139c861398e565b60405290565b604051601f8201601f1916810167ffffffffffffffff811182821017156139f7576139f761398e565b604052919050565b60008060408385031215613a1257600080fd5b823567ffffffffffffffff80821115613a2a57600080fd5b818501915085601f830112613a3e57600080fd5b8135602082821115613a5257613a5261398e565b8160051b9250613a638184016139ce565b8281529284018101928181019089851115613a7d57600080fd5b948201945b84861015613a9b57853582529482019490820190613a82565b9650613aaa90508782016136f0565b9450505050509250929050565b600080600060408486031215613acc57600080fd5b833567ffffffffffffffff811115613ae357600080fd5b613aef8682870161372c565b9094509250506020840135613b03816136db565b809150509250925092565b803560ff811681146136fb57600080fd5b60008060008060008060c08789031215613b3857600080fd5b8635613b43816136db565b95506020870135945060408701359350613b5f60608801613b0e565b92506080870135915060a087013590509295509295509295565b65ffffffffffff811681146110c657600080fd5b80356136fb81613b79565b600080828403610120811215613bad57600080fd5b61010080821215613bbd57600080fd5b613bc56139a4565b91508435613bd281613863565b8252613be0602086016136f0565b6020830152613bf160408601613828565b6040830152613c0260608601613b8d565b6060830152613c1360808601613b8d565b6080830152613c2460a08601613b8d565b60a0830152613c3560c08601613b8d565b60c0830152613c4660e08601613b8d565b60e0830152909593013593505050565b600080600080600080600060e0888a031215613c7157600080fd5b8735613c7c816136db565b96506020880135613c8c816136db565b95506040880135945060608801359350613ca860808901613b0e565b925060a0880135915060c0880135905092959891949750929550565b600060208284031215613cd657600080fd5b8135610ebf81613863565b60008060408385031215613cf457600080fd5b8235613cff816136db565b9150602083013563ffffffff8116811461385857600080fd5b600181811c90821680613d2c57607f821691505b602082108103612efa57634e487b7160e01b600052602260045260246000fd5b634e487b7160e01b600052603260045260246000fd5b634e487b7160e01b600052602160045260246000fd5b600060208284031215613d8a57600080fd5b5051919050565b600060208284031215613da357600080fd5b81518015158114610ebf57600080fd5b6020808252601f908201527f5265656e7472616e637947756172643a207265656e7472616e742063616c6c00604082015260600190565b602080825260129082015271086deead8c840dcdee840e6cadcc8408aa8960731b604082015260600190565b81810381811115610c8857610c88613664565b6000816000190483118215151615613e4357613e43613664565b500290565b600082613e6557634e487b7160e01b600052601260045260246000fd5b500490565b80516136fb816136db565b80516136fb81613818565b80516136fb81613b79565b6000610100808385031215613e9f57600080fd5b6040519081019067ffffffffffffffff82118183101715613ec257613ec261398e565b8160405283519150613ed382613863565b818152613ee260208501613e6a565b6020820152613ef360408501613e75565b6040820152613f0460608501613e80565b6060820152613f1560808501613e80565b6080820152613f2660a08501613e80565b60a0820152613f3760c08501613e80565b60c0820152613f4860e08501613e80565b60e0820152949350505050565b65ffffffffffff82811682821603908082111561331957613319613664565b634e487b7160e01b600052603160045260246000fdfea264697066735822122048777349587f9d7d734444d290f7914b32224876d32b9f8aea2bb33056dd131a64736f6c63430008100033dec2bacdd2f05b59de34da9b523dff8be42e5e38e818c82fdb0bae774387a724000000000000000000000000c9e84f6b92a9000e97108fe2ba43dcb217d420e80000000000000000000000000000000000000000000000000000000063dae6a3

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

000000000000000000000000c9e84f6b92a9000e97108fe2ba43dcb217d420e80000000000000000000000000000000000000000000000000000000063dae6a3

-----Decoded View---------------
Arg [0] : _amplifierContract (address): 0xC9e84f6B92A9000e97108fE2BA43Dcb217D420E8
Arg [1] : _lastPot (uint256): 1675290275

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000c9e84f6b92a9000e97108fe2ba43dcb217d420e8
Arg [1] : 0000000000000000000000000000000000000000000000000000000063dae6a3