pragma solidity ^0.4.24;
// produced by the Solididy File Flattener (c) David Appleton 2018
// contact : [email protected]
// released under Apache 2.0 licence
contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   * @notice Renouncing to ownership will leave the contract without an owner.
   * It will not be possible to call the functions with the `onlyOwner`
   * modifier anymore.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function transferOwnership(address _newOwner) public onlyOwner {
    _transferOwnership(_newOwner);
  }

  /**
   * @dev Transfers control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function _transferOwnership(address _newOwner) internal {
    require(_newOwner != address(0));
    emit OwnershipTransferred(owner, _newOwner);
    owner = _newOwner;
  }
}

library SafeMath {

  /**
  * @dev Multiplies two numbers, throws on overflow.
  */
  function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (a == 0) {
      return 0;
    }

    c = a * b;
    assert(c / a == b);
    return c;
  }

  /**
  * @dev Integer division of two numbers, truncating the quotient.
  */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    // assert(b > 0); // Solidity automatically throws when dividing by 0
    // uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return a / b;
  }

  /**
  * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  /**
  * @dev Adds two numbers, throws on overflow.
  */
  function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
    c = a + b;
    assert(c >= a);
    return c;
  }
}

contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() onlyOwner whenNotPaused public {
    paused = true;
    emit Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() onlyOwner whenPaused public {
    paused = false;
    emit Unpause();
  }
}

contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) balances;

  uint256 totalSupply_;

  /**
  * @dev Total number of tokens in existence
  */
  function totalSupply() public view returns (uint256) {
    return totalSupply_;
  }

  /**
  * @dev Transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(_to != address(0));
    require(_value <= balances[msg.sender]);

    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    emit Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) public view returns (uint256) {
    return balances[_owner];
  }
}

contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender)
    public view returns (uint256);

  function transferFrom(address from, address to, uint256 value)
    public returns (bool);

  function approve(address spender, uint256 value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

contract DetailedERC20 is ERC20 {
  string public name;
  string public symbol;
  uint8 public decimals;

  constructor(string _name, string _symbol, uint8 _decimals) public {
    name = _name;
    symbol = _symbol;
    decimals = _decimals;
  }
}

contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    returns (bool)
  {
    require(_to != address(0));
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    emit Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    emit Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(
    address _owner,
    address _spender
   )
    public
    view
    returns (uint256)
  {
    return allowed[_owner][_spender];
  }

  /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(
    address _spender,
    uint256 _addedValue
  )
    public
    returns (bool)
  {
    allowed[msg.sender][_spender] = (
      allowed[msg.sender][_spender].add(_addedValue));
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(
    address _spender,
    uint256 _subtractedValue
  )
    public
    returns (bool)
  {
    uint256 oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }
}

contract PausableToken is StandardToken, Pausable {

  function transfer(
    address _to,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.transfer(_to, _value);
  }

  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.transferFrom(_from, _to, _value);
  }

  function approve(
    address _spender,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.approve(_spender, _value);
  }

  function increaseApproval(
    address _spender,
    uint _addedValue
  )
    public
    whenNotPaused
    returns (bool success)
  {
    return super.increaseApproval(_spender, _addedValue);
  }

  function decreaseApproval(
    address _spender,
    uint _subtractedValue
  )
    public
    whenNotPaused
    returns (bool success)
  {
    return super.decreaseApproval(_spender, _subtractedValue);
  }
}

contract MintableToken is StandardToken, Ownable {
  event Mint(address indexed to, uint256 amount);
  event MintFinished();

  bool public mintingFinished = false;


  modifier canMint() {
    require(!mintingFinished);
    _;
  }

  modifier hasMintPermission() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Function to mint tokens
   * @param _to The address that will receive the minted tokens.
   * @param _amount The amount of tokens to mint.
   * @return A boolean that indicates if the operation was successful.
   */
  function mint(
    address _to,
    uint256 _amount
  )
    hasMintPermission
    canMint
    public
    returns (bool)
  {
    totalSupply_ = totalSupply_.add(_amount);
    balances[_to] = balances[_to].add(_amount);
    emit Mint(_to, _amount);
    emit Transfer(address(0), _to, _amount);
    return true;
  }

  /**
   * @dev Function to stop minting new tokens.
   * @return True if the operation was successful.
   */
  function finishMinting() onlyOwner canMint public returns (bool) {
    mintingFinished = true;
    emit MintFinished();
    return true;
  }
}

contract CappedToken is MintableToken {

  uint256 public cap;

  constructor(uint256 _cap) public {
    require(_cap > 0);
    cap = _cap;
  }

  /**
   * @dev Function to mint tokens
   * @param _to The address that will receive the minted tokens.
   * @param _amount The amount of tokens to mint.
   * @return A boolean that indicates if the operation was successful.
   */
  function mint(
    address _to,
    uint256 _amount
  )
    public
    returns (bool)
  {
    require(totalSupply_.add(_amount) <= cap);

    return super.mint(_to, _amount);
  }
}

contract EveryToken is DetailedERC20, PausableToken, CappedToken {

    string public name = "EVERY Token"; // name of token
    string public symbol = "EVERY"; // token symbol
    uint8 public decimals = 18; // decimal places
    uint256 public cap = 1000000000 ether; // total supply of tokens

    /**
    * @dev Constructor for the Every Token contract.
    *
    * This contract creates a Pausable, Capped, Mintable token
    * Pausing freezes all token functions - transfers, allowances, minting
    * The cap is the max number of tokens that can ever exist.
    * Minting will stop if the cap is reached or finishMinting() is called
    * finishMinting() is permanent 
    */
    constructor()
        CappedToken(cap)
        DetailedERC20(name, symbol, decimals)
    public {
    }

    /**
    * @dev Special override for the standard mint function
    *
    * The mint function is not overridden in the PausableToken so we must
    * override here to include the whenNotPaused modifier
    *
    * @param _to Recepient of new tokens
    * @param _amount Amount to mint
    */
    function mint(address _to, uint256 _amount) whenNotPaused public returns (bool) {
        return super.mint(_to, _amount); 
    }

    /**
    * @dev Special override for the standard finishMinting function
    *
    * The finishMinting function is not overridden in the PausableToken so we must
    * override here to include the whenNotPaused modifier
    */
    function finishMinting() whenNotPaused public returns (bool) {
        return super.finishMinting();
    }
}