pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract CommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) != Constants.ETH) {
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        bytes memory encodedData = abi.encodePacked(method, data);
        aggregator.functionCallWithValue(encodedData, msg.value);
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            uint256 balance = tokenFrom.balanceOf(address(this));
            _transfer(tokenFrom, balance, recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
library Constants {
    address internal constant ETH = 0x0000000000000000000000000000000000000000;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract FeeCommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet) public {
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract FeeWethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    IWETH public immutable weth;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(IWETH _weth, address payable feeWallet) public {
        weth = _weth;
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256) external;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import "../Constants.sol";
contract UniswapAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    IUniswapV2Router02 public immutable UNISWAP;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet, IUniswapV2Router02 uniswap) public {
        FEE_WALLET = feeWallet;
        UNISWAP = uniswap;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param path Used by Uniswap
     * @param deadline Timestamp at which the swap becomes invalid. Used by Uniswap
     * @param feeOnTransfer Use `supportingFeeOnTransfer` Uniswap methods
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        address[] calldata path,
        uint256 deadline,
        bool feeOnTransfer,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
        }
        if (address(tokenFrom) == Constants.ETH) {
            if (feeOnTransfer) {
                UNISWAP.swapExactETHForTokensSupportingFeeOnTransferTokens{
                    value: address(this).balance
                }(amountTo, path, address(this), deadline);
            } else {
                UNISWAP.swapExactETHForTokens{value: address(this).balance}(
                    amountTo,
                    path,
                    address(this),
                    deadline
                );
            }
        } else {
            _approveSpender(tokenFrom, address(UNISWAP), amountFrom);
            if (address(tokenTo) == Constants.ETH) {
                if (feeOnTransfer) {
                    UNISWAP.swapExactTokensForETHSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForETH(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            } else {
                if (feeOnTransfer) {
                    UNISWAP
                        .swapExactTokensForTokensSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            }
        }
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract WethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    IWETH public immutable weth;
    constructor(IWETH _weth) public {
        weth = _weth;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface ICHI is IERC20 {
    function freeUpTo(uint256 value) external returns (uint256);
    function freeFromUpTo(
        address from,
        uint256 value
    ) external returns (uint256);
    function mint(uint256 value) external;
}
  
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.0;
// We import the contract so truffle compiles it, and we have the ABI
// available when working from truffle console.
import "@openzeppelin/contracts/token/ERC20/ERC20.sol"; //helpers// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    uint8 private _decimals;
    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }
    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./ICHI.sol";
import "./Spender.sol";
/**
 * @title MetaSwap
 */
contract MetaSwap is Ownable, Pausable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    struct Adapter {
        address addr; // adapter's address
        bytes4 selector;
        bytes data; // adapter's fixed data
    }
    ICHI public immutable chi;
    Spender public immutable spender;
    // Mapping of aggregatorId to aggregator
    mapping(string => Adapter) public adapters;
    mapping(string => bool) public adapterRemoved;
    event AdapterSet(
        string indexed aggregatorId,
        address indexed addr,
        bytes4 selector,
        bytes data
    );
    event AdapterRemoved(string indexed aggregatorId);
    event Swap(string indexed aggregatorId, address indexed sender);
    constructor(ICHI _chi) public {
        chi = _chi;
        spender = new Spender();
    }
    /**
     * @dev Sets the adapter for an aggregator. It can't be changed later.
     * @param aggregatorId Aggregator's identifier
     * @param addr Address of the contract that contains the logic for this aggregator
     * @param selector The function selector of the swap function in the adapter
     * @param data Fixed abi encoded data the will be passed in each delegatecall made to the adapter
     */
    function setAdapter(
        string calldata aggregatorId,
        address addr,
        bytes4 selector,
        bytes calldata data
    ) external onlyOwner {
        require(addr.isContract(), "ADAPTER_IS_NOT_A_CONTRACT");
        require(!adapterRemoved[aggregatorId], "ADAPTER_REMOVED");
        Adapter storage adapter = adapters[aggregatorId];
        require(adapter.addr == address(0), "ADAPTER_EXISTS");
        adapter.addr = addr;
        adapter.selector = selector;
        adapter.data = data;
        emit AdapterSet(aggregatorId, addr, selector, data);
    }
    /**
     * @dev Removes the adapter for an existing aggregator. This can't be undone.
     * @param aggregatorId Aggregator's identifier
     */
    function removeAdapter(string calldata aggregatorId) external onlyOwner {
        require(
            adapters[aggregatorId].addr != address(0),
            "ADAPTER_DOES_NOT_EXIST"
        );
        delete adapters[aggregatorId];
        adapterRemoved[aggregatorId] = true;
        emit AdapterRemoved(aggregatorId);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        _swap(aggregatorId, tokenFrom, amount, data);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swapUsingGasToken(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        uint256 gas = gasleft();
        _swap(aggregatorId, tokenFrom, amount, data);
        uint256 gasSpent = 21000 + gas - gasleft() + 16 * msg.data.length;
        chi.freeFromUpTo(msg.sender, (gasSpent + 14154) / 41947);
    }
    function pauseSwaps() external onlyOwner {
        _pause();
    }
    function unpauseSwaps() external onlyOwner {
        _unpause();
    }
    function _swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) internal {
        Adapter storage adapter = adapters[aggregatorId];
        if (address(tokenFrom) != Constants.ETH) {
            tokenFrom.safeTransferFrom(msg.sender, address(spender), amount);
        }
        spender.swap{value: msg.value}(
            adapter.addr,
            abi.encodePacked(
                adapter.selector,
                abi.encode(msg.sender),
                adapter.data,
                data
            )
        );
        emit Swap(aggregatorId, msg.sender);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor () internal {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./Constants.sol";
contract Spender {
    address public immutable metaswap;
    constructor() public {
        metaswap = msg.sender;
    }
    /// @dev Receives ether from swaps
    fallback() external payable {}
    function swap(address adapter, bytes calldata data) external payable {
        require(msg.sender == metaswap, "FORBIDDEN");
        require(adapter != address(0), "ADAPTER_NOT_PROVIDED");
        _delegate(adapter, data, "ADAPTER_DELEGATECALL_FAILED");
    }
    /**
     * @dev Performs a delegatecall and bubbles up the errors, adapted from
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol
     * @param target Address of the contract to delegatecall
     * @param data Data passed in the delegatecall
     * @param errorMessage Fallback revert reason
     */
    function _delegate(
        address target,
        bytes memory data,
        string memory errorMessage
    ) private returns (bytes memory) {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
contract MockAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    event MockAdapterEvent(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    );
    function test(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    ) external payable {
        emit MockAdapterEvent(sender, valueFixed, valueDynamic);
    }
    function testRevert(
        address,
        uint256,
        uint256
    ) external payable {
        revert("SWAP_FAILED");
    }
    function testRevertNoReturnData(
        address,
        uint256,
        uint256
    ) external payable {
        revert();
    }
}
pragma solidity ^0.6.0;
// TAKEN FROM https://github.com/gnosis/mock-contract
// TODO: use their npm package once it is published for solidity 0.6
interface MockInterface {
    /**
     * @dev After calling this method, the mock will return `response` when it is called
     * with any calldata that is not mocked more specifically below
     * (e.g. using givenMethodReturn).
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenAnyReturn(bytes calldata response) external;
    function givenAnyReturnBool(bool response) external;
    function givenAnyReturnUint(uint256 response) external;
    function givenAnyReturnAddress(address response) external;
    function givenAnyRevert() external;
    function givenAnyRevertWithMessage(string calldata message) external;
    function givenAnyRunOutOfGas() external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called regardless of arguments. If the methodId and arguments
     * are mocked more specifically (using `givenMethodAndArguments`) the latter
     * will take precedence.
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenMethodReturn(bytes calldata method, bytes calldata response)
        external;
    function givenMethodReturnBool(bytes calldata method, bool response)
        external;
    function givenMethodReturnUint(bytes calldata method, uint256 response)
        external;
    function givenMethodReturnAddress(bytes calldata method, address response)
        external;
    function givenMethodRevert(bytes calldata method) external;
    function givenMethodRevertWithMessage(
        bytes calldata method,
        string calldata message
    ) external;
    function givenMethodRunOutOfGas(bytes calldata method) external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called with matching arguments. These exact calldataMocks will take
     * precedence over all other calldataMocks.
     * @param call ABI encoded calldata (methodId and arguments)
     * @param response ABI encoded response that will be returned if contract is invoked with calldata
     */
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external;
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external;
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external;
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external;
    function givenCalldataRevert(bytes calldata call) external;
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external;
    function givenCalldataRunOutOfGas(bytes calldata call) external;
    /**
     * @dev Returns the number of times anything has been called on this mock since last reset
     */
    function invocationCount() external returns (uint256);
    /**
     * @dev Returns the number of times the given method has been called on this mock since last reset
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     */
    function invocationCountForMethod(bytes calldata method)
        external
        returns (uint256);
    /**
     * @dev Returns the number of times this mock has been called with the exact calldata since last reset.
     * @param call ABI encoded calldata (methodId and arguments)
     */
    function invocationCountForCalldata(bytes calldata call)
        external
        returns (uint256);
    /**
     * @dev Resets all mocked methods and invocation counts.
     */
    function reset() external;
}
/**
 * Implementation of the MockInterface.
 */
contract MockContract is MockInterface {
    enum MockType {Return, Revert, OutOfGas}
    bytes32 public constant MOCKS_LIST_START = hex"01";
    bytes public constant MOCKS_LIST_END = "0xff";
    bytes32 public constant MOCKS_LIST_END_HASH = keccak256(MOCKS_LIST_END);
    bytes4 public constant SENTINEL_ANY_MOCKS = hex"01";
    bytes public constant DEFAULT_FALLBACK_VALUE = abi.encode(false);
    // A linked list allows easy iteration and inclusion checks
    mapping(bytes32 => bytes) calldataMocks;
    mapping(bytes => MockType) calldataMockTypes;
    mapping(bytes => bytes) calldataExpectations;
    mapping(bytes => string) calldataRevertMessage;
    mapping(bytes32 => uint256) calldataInvocations;
    mapping(bytes4 => bytes4) methodIdMocks;
    mapping(bytes4 => MockType) methodIdMockTypes;
    mapping(bytes4 => bytes) methodIdExpectations;
    mapping(bytes4 => string) methodIdRevertMessages;
    mapping(bytes32 => uint256) methodIdInvocations;
    MockType fallbackMockType;
    bytes fallbackExpectation = DEFAULT_FALLBACK_VALUE;
    string fallbackRevertMessage;
    uint256 invocations;
    uint256 resetCount;
    constructor() public {
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
    }
    function trackCalldataMock(bytes memory call) private {
        bytes32 callHash = keccak256(call);
        if (calldataMocks[callHash].length == 0) {
            calldataMocks[callHash] = calldataMocks[MOCKS_LIST_START];
            calldataMocks[MOCKS_LIST_START] = call;
        }
    }
    function trackMethodIdMock(bytes4 methodId) private {
        if (methodIdMocks[methodId] == 0x0) {
            methodIdMocks[methodId] = methodIdMocks[SENTINEL_ANY_MOCKS];
            methodIdMocks[SENTINEL_ANY_MOCKS] = methodId;
        }
    }
    function _givenAnyReturn(bytes memory response) internal {
        fallbackMockType = MockType.Return;
        fallbackExpectation = response;
    }
    function givenAnyReturn(bytes calldata response) external override {
        _givenAnyReturn(response);
    }
    function givenAnyReturnBool(bool response) external override {
        uint256 flag = response ? 1 : 0;
        _givenAnyReturn(uintToBytes(flag));
    }
    function givenAnyReturnUint(uint256 response) external override {
        _givenAnyReturn(uintToBytes(response));
    }
    function givenAnyReturnAddress(address response) external override {
        _givenAnyReturn(uintToBytes(uint256(response)));
    }
    function givenAnyRevert() external override {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = "";
    }
    function givenAnyRevertWithMessage(string calldata message)
        external
        override
    {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = message;
    }
    function givenAnyRunOutOfGas() external override {
        fallbackMockType = MockType.OutOfGas;
    }
    function _givenCalldataReturn(bytes memory call, bytes memory response)
        private
    {
        calldataMockTypes[call] = MockType.Return;
        calldataExpectations[call] = response;
        trackCalldataMock(call);
    }
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenCalldataReturn(call, response);
    }
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenCalldataReturn(call, uintToBytes(flag));
    }
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(response));
    }
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(uint256(response)));
    }
    function _givenMethodReturn(bytes memory call, bytes memory response)
        private
    {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Return;
        methodIdExpectations[method] = response;
        trackMethodIdMock(method);
    }
    function givenMethodReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenMethodReturn(call, response);
    }
    function givenMethodReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenMethodReturn(call, uintToBytes(flag));
    }
    function givenMethodReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(response));
    }
    function givenMethodReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(uint256(response)));
    }
    function givenCalldataRevert(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = "";
        trackCalldataMock(call);
    }
    function givenMethodRevert(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        trackMethodIdMock(method);
    }
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = message;
        trackCalldataMock(call);
    }
    function givenMethodRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        methodIdRevertMessages[method] = message;
        trackMethodIdMock(method);
    }
    function givenCalldataRunOutOfGas(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.OutOfGas;
        trackCalldataMock(call);
    }
    function givenMethodRunOutOfGas(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.OutOfGas;
        trackMethodIdMock(method);
    }
    function invocationCount() external override returns (uint256) {
        return invocations;
    }
    function invocationCountForMethod(bytes calldata call)
        external
        override
        returns (uint256)
    {
        bytes4 method = bytesToBytes4(call);
        return
            methodIdInvocations[keccak256(
                abi.encodePacked(resetCount, method)
            )];
    }
    function invocationCountForCalldata(bytes calldata call)
        external
        override
        returns (uint256)
    {
        return
            calldataInvocations[keccak256(abi.encodePacked(resetCount, call))];
    }
    function reset() external override {
        // Reset all exact calldataMocks
        bytes memory nextMock = calldataMocks[MOCKS_LIST_START];
        bytes32 mockHash = keccak256(nextMock);
        // We cannot compary bytes
        while (mockHash != MOCKS_LIST_END_HASH) {
            // Reset all mock maps
            calldataMockTypes[nextMock] = MockType.Return;
            calldataExpectations[nextMock] = hex"";
            calldataRevertMessage[nextMock] = "";
            // Set next mock to remove
            nextMock = calldataMocks[mockHash];
            // Remove from linked list
            calldataMocks[mockHash] = "";
            // Update mock hash
            mockHash = keccak256(nextMock);
        }
        // Clear list
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        // Reset all any calldataMocks
        bytes4 nextAnyMock = methodIdMocks[SENTINEL_ANY_MOCKS];
        while (nextAnyMock != SENTINEL_ANY_MOCKS) {
            bytes4 currentAnyMock = nextAnyMock;
            methodIdMockTypes[currentAnyMock] = MockType.Return;
            methodIdExpectations[currentAnyMock] = hex"";
            methodIdRevertMessages[currentAnyMock] = "";
            nextAnyMock = methodIdMocks[currentAnyMock];
            // Remove from linked list
            methodIdMocks[currentAnyMock] = 0x0;
        }
        // Clear list
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
        fallbackExpectation = DEFAULT_FALLBACK_VALUE;
        fallbackMockType = MockType.Return;
        invocations = 0;
        resetCount += 1;
    }
    function useAllGas() private {
        while (true) {
            bool s;
            assembly {
                //expensive call to EC multiply contract
                s := call(sub(gas(), 2000), 6, 0, 0x0, 0xc0, 0x0, 0x60)
            }
        }
    }
    function bytesToBytes4(bytes memory b) private pure returns (bytes4) {
        bytes4 out;
        for (uint256 i = 0; i < 4; i++) {
            out |= bytes4(b[i] & 0xFF) >> (i * 8);
        }
        return out;
    }
    function uintToBytes(uint256 x) private pure returns (bytes memory b) {
        b = new bytes(32);
        assembly {
            mstore(add(b, 32), x)
        }
    }
    function updateInvocationCount(
        bytes4 methodId,
        bytes memory originalMsgData
    ) public {
        require(
            msg.sender == address(this),
            "Can only be called from the contract itself"
        );
        invocations += 1;
        methodIdInvocations[keccak256(
            abi.encodePacked(resetCount, methodId)
        )] += 1;
        calldataInvocations[keccak256(
            abi.encodePacked(resetCount, originalMsgData)
        )] += 1;
    }
    fallback() external payable {
        bytes4 methodId;
        assembly {
            methodId := calldataload(0)
        }
        // First, check exact matching overrides
        if (calldataMockTypes[msg.data] == MockType.Revert) {
            revert(calldataRevertMessage[msg.data]);
        }
        if (calldataMockTypes[msg.data] == MockType.OutOfGas) {
            useAllGas();
        }
        bytes memory result = calldataExpectations[msg.data];
        // Then check method Id overrides
        if (result.length == 0) {
            if (methodIdMockTypes[methodId] == MockType.Revert) {
                revert(methodIdRevertMessages[methodId]);
            }
            if (methodIdMockTypes[methodId] == MockType.OutOfGas) {
                useAllGas();
            }
            result = methodIdExpectations[methodId];
        }
        // Last, use the fallback override
        if (result.length == 0) {
            if (fallbackMockType == MockType.Revert) {
                revert(fallbackRevertMessage);
            }
            if (fallbackMockType == MockType.OutOfGas) {
                useAllGas();
            }
            result = fallbackExpectation;
        }
        // Record invocation as separate call so we don't rollback in case we are called with STATICCALL
        (, bytes memory r) = address(this).call{gas: 100000}(
            abi.encodeWithSignature(
                "updateInvocationCount(bytes4,bytes)",
                methodId,
                msg.data
            )
        );
        assert(r.length == 0);
        assembly {
            return(add(0x20, result), mload(result))
        }
    }
}
pragma solidity ^0.6.0;
contract MockSelfDestruct {
    constructor() public payable {}
    fallback() external payable {
        selfdestruct(msg.sender);
    }
    function kill(address payable target) external payable {
        selfdestruct(target);
    }
}

{"Constants.84ef19f8.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nlibrary Constants {\r\n    address internal constant ETH = 0x0000000000000000000000000000000000000000;\r\n}\r\n"},"Spender.3372a096.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nimport \"./Constants.84ef19f8.sol\";\r\n\r\ncontract Spender {\r\n    address public immutable metaswap;\r\n\r\n    constructor() public {\r\n        metaswap = msg.sender;\r\n    }\r\n\r\n    /// @dev Receives ether from swaps\r\n    fallback() external payable {}\r\n\r\n    function swap(address adapter, bytes calldata data) external payable {\r\n        require(msg.sender == metaswap, \"FORBIDDEN\");\r\n        require(adapter != address(0), \"ADAPTER_NOT_PROVIDED\");\r\n        _delegate(adapter, data, \"ADAPTER_DELEGATECALL_FAILED\");\r\n    }\r\n\r\n    /**\r\n     * @dev Performs a delegatecall and bubbles up the errors, adapted from\r\n     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol\r\n     * @param target Address of the contract to delegatecall\r\n     * @param data Data passed in the delegatecall\r\n     * @param errorMessage Fallback revert reason\r\n     */\r\n    function _delegate(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) private returns (bytes memory) {\r\n        // solhint-disable-next-line avoid-low-level-calls\r\n        (bool success, bytes memory returndata) = target.delegatecall(data);\r\n        if (success) {\r\n            return returndata;\r\n        } else {\r\n            // Look for revert reason and bubble it up if present\r\n            if (returndata.length \u003e 0) {\r\n                // The easiest way to bubble the revert reason is using memory via assembly\r\n\r\n                // solhint-disable-next-line no-inline-assembly\r\n                assembly {\r\n                    let returndata_size := mload(returndata)\r\n                    revert(add(32, returndata), returndata_size)\r\n                }\r\n            } else {\r\n                revert(errorMessage);\r\n            }\r\n        }\r\n    }\r\n}\r\n"}}

pragma solidity ^0.4.17;

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        assert(c / a == b);
        return c;
    }

    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // assert(b > 0); // Solidity automatically throws when dividing by 0
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }

    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        assert(b <= a);
        return a - b;
    }

    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        assert(c >= a);
        return c;
    }
}

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address public owner;

    /**
      * @dev The Ownable constructor sets the original `owner` of the contract to the sender
      * account.
      */
    function Ownable() public {
        owner = msg.sender;
    }

    /**
      * @dev Throws if called by any account other than the owner.
      */
    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }

    /**
    * @dev Allows the current owner to transfer control of the contract to a newOwner.
    * @param newOwner The address to transfer ownership to.
    */
    function transferOwnership(address newOwner) public onlyOwner {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }

}

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20Basic {
    uint public _totalSupply;
    function totalSupply() public constant returns (uint);
    function balanceOf(address who) public constant returns (uint);
    function transfer(address to, uint value) public;
    event Transfer(address indexed from, address indexed to, uint value);
}

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
    function allowance(address owner, address spender) public constant returns (uint);
    function transferFrom(address from, address to, uint value) public;
    function approve(address spender, uint value) public;
    event Approval(address indexed owner, address indexed spender, uint value);
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is Ownable, ERC20Basic {
    using SafeMath for uint;

    mapping(address => uint) public balances;

    // additional variables for use if transaction fees ever became necessary
    uint public basisPointsRate = 0;
    uint public maximumFee = 0;

    /**
    * @dev Fix for the ERC20 short address attack.
    */
    modifier onlyPayloadSize(uint size) {
        require(!(msg.data.length < size + 4));
        _;
    }

    /**
    * @dev transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint _value) public onlyPayloadSize(2 * 32) {
        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        uint sendAmount = _value.sub(fee);
        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(msg.sender, owner, fee);
        }
        Transfer(msg.sender, _to, sendAmount);
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public constant returns (uint balance) {
        return balances[_owner];
    }

}

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based oncode by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is BasicToken, ERC20 {

    mapping (address => mapping (address => uint)) public allowed;

    uint public constant MAX_UINT = 2**256 - 1;

    /**
    * @dev Transfer tokens from one address to another
    * @param _from address The address which you want to send tokens from
    * @param _to address The address which you want to transfer to
    * @param _value uint the amount of tokens to be transferred
    */
    function transferFrom(address _from, address _to, uint _value) public onlyPayloadSize(3 * 32) {
        var _allowance = allowed[_from][msg.sender];

        // Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
        // if (_value > _allowance) throw;

        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        if (_allowance < MAX_UINT) {
            allowed[_from][msg.sender] = _allowance.sub(_value);
        }
        uint sendAmount = _value.sub(fee);
        balances[_from] = balances[_from].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(_from, owner, fee);
        }
        Transfer(_from, _to, sendAmount);
    }

    /**
    * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
    * @param _spender The address which will spend the funds.
    * @param _value The amount of tokens to be spent.
    */
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {

        // To change the approve amount you first have to reduce the addresses`
        //  allowance to zero by calling `approve(_spender, 0)` if it is not
        //  already 0 to mitigate the race condition described here:
        //  https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
        require(!((_value != 0) && (allowed[msg.sender][_spender] != 0)));

        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);
    }

    /**
    * @dev Function to check the amount of tokens than an owner allowed to a spender.
    * @param _owner address The address which owns the funds.
    * @param _spender address The address which will spend the funds.
    * @return A uint specifying the amount of tokens still available for the spender.
    */
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        return allowed[_owner][_spender];
    }

}


/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() onlyOwner whenNotPaused public {
    paused = true;
    Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() onlyOwner whenPaused public {
    paused = false;
    Unpause();
  }
}

contract BlackList is Ownable, BasicToken {

    /////// Getters to allow the same blacklist to be used also by other contracts (including upgraded Tether) ///////
    function getBlackListStatus(address _maker) external constant returns (bool) {
        return isBlackListed[_maker];
    }

    function getOwner() external constant returns (address) {
        return owner;
    }

    mapping (address => bool) public isBlackListed;
    
    function addBlackList (address _evilUser) public onlyOwner {
        isBlackListed[_evilUser] = true;
        AddedBlackList(_evilUser);
    }

    function removeBlackList (address _clearedUser) public onlyOwner {
        isBlackListed[_clearedUser] = false;
        RemovedBlackList(_clearedUser);
    }

    function destroyBlackFunds (address _blackListedUser) public onlyOwner {
        require(isBlackListed[_blackListedUser]);
        uint dirtyFunds = balanceOf(_blackListedUser);
        balances[_blackListedUser] = 0;
        _totalSupply -= dirtyFunds;
        DestroyedBlackFunds(_blackListedUser, dirtyFunds);
    }

    event DestroyedBlackFunds(address _blackListedUser, uint _balance);

    event AddedBlackList(address _user);

    event RemovedBlackList(address _user);

}

contract UpgradedStandardToken is StandardToken{
    // those methods are called by the legacy contract
    // and they must ensure msg.sender to be the contract address
    function transferByLegacy(address from, address to, uint value) public;
    function transferFromByLegacy(address sender, address from, address spender, uint value) public;
    function approveByLegacy(address from, address spender, uint value) public;
}

contract TetherToken is Pausable, StandardToken, BlackList {

    string public name;
    string public symbol;
    uint public decimals;
    address public upgradedAddress;
    bool public deprecated;

    //  The contract can be initialized with a number of tokens
    //  All the tokens are deposited to the owner address
    //
    // @param _balance Initial supply of the contract
    // @param _name Token Name
    // @param _symbol Token symbol
    // @param _decimals Token decimals
    function TetherToken(uint _initialSupply, string _name, string _symbol, uint _decimals) public {
        _totalSupply = _initialSupply;
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
        balances[owner] = _initialSupply;
        deprecated = false;
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transfer(address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[msg.sender]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferByLegacy(msg.sender, _to, _value);
        } else {
            return super.transfer(_to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transferFrom(address _from, address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[_from]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferFromByLegacy(msg.sender, _from, _to, _value);
        } else {
            return super.transferFrom(_from, _to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function balanceOf(address who) public constant returns (uint) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).balanceOf(who);
        } else {
            return super.balanceOf(who);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).approveByLegacy(msg.sender, _spender, _value);
        } else {
            return super.approve(_spender, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        if (deprecated) {
            return StandardToken(upgradedAddress).allowance(_owner, _spender);
        } else {
            return super.allowance(_owner, _spender);
        }
    }

    // deprecate current contract in favour of a new one
    function deprecate(address _upgradedAddress) public onlyOwner {
        deprecated = true;
        upgradedAddress = _upgradedAddress;
        Deprecate(_upgradedAddress);
    }

    // deprecate current contract if favour of a new one
    function totalSupply() public constant returns (uint) {
        if (deprecated) {
            return StandardToken(upgradedAddress).totalSupply();
        } else {
            return _totalSupply;
        }
    }

    // Issue a new amount of tokens
    // these tokens are deposited into the owner address
    //
    // @param _amount Number of tokens to be issued
    function issue(uint amount) public onlyOwner {
        require(_totalSupply + amount > _totalSupply);
        require(balances[owner] + amount > balances[owner]);

        balances[owner] += amount;
        _totalSupply += amount;
        Issue(amount);
    }

    // Redeem tokens.
    // These tokens are withdrawn from the owner address
    // if the balance must be enough to cover the redeem
    // or the call will fail.
    // @param _amount Number of tokens to be issued
    function redeem(uint amount) public onlyOwner {
        require(_totalSupply >= amount);
        require(balances[owner] >= amount);

        _totalSupply -= amount;
        balances[owner] -= amount;
        Redeem(amount);
    }

    function setParams(uint newBasisPoints, uint newMaxFee) public onlyOwner {
        // Ensure transparency by hardcoding limit beyond which fees can never be added
        require(newBasisPoints < 20);
        require(newMaxFee < 50);

        basisPointsRate = newBasisPoints;
        maximumFee = newMaxFee.mul(10**decimals);

        Params(basisPointsRate, maximumFee);
    }

    // Called when new token are issued
    event Issue(uint amount);

    // Called when tokens are redeemed
    event Redeem(uint amount);

    // Called when contract is deprecated
    event Deprecate(address newAddress);

    // Called if contract ever adds fees
    event Params(uint feeBasisPoints, uint maxFee);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;
pragma experimental ABIEncoderV2;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


// solhint-disable max-line-length
contract LibConstants {
   
    // Asset data for ZRX token. Used for fee transfers.
    // @TODO: Hardcode constant when we deploy. Currently 
    //        not constant to make testing easier.

    // The proxyId for ZRX_ASSET_DATA is bytes4(keccak256("ERC20Token(address)")) = 0xf47261b0
    
    // Kovan ZRX address is 0x6ff6c0ff1d68b964901f986d4c9fa3ac68346570.
    // The ABI encoded proxyId and address is 0xf47261b00000000000000000000000006ff6c0ff1d68b964901f986d4c9fa3ac68346570
    // bytes constant public ZRX_ASSET_DATA = "\xf4\x72\x61\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x6f\xf6\xc0\xff\x1d\x68\xb9\x64\x90\x1f\x98\x6d\x4c\x9f\xa3\xac\x68\x34\x65\x70";
    
    // Mainnet ZRX address is 0xe41d2489571d322189246dafa5ebde1f4699f498.
    // The ABI encoded proxyId and address is 0xf47261b0000000000000000000000000e41d2489571d322189246dafa5ebde1f4699f498
    // bytes constant public ZRX_ASSET_DATA = "\xf4\x72\x61\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe4\x1d\x24\x89\x57\x1d\x32\x21\x89\x24\x6d\xaf\xa5\xeb\xde\x1f\x46\x99\xf4\x98";
    
    // solhint-disable-next-line var-name-mixedcase
    bytes public ZRX_ASSET_DATA;

    // @TODO: Remove when we deploy.
    constructor (bytes memory zrxAssetData)
        public
    {
        ZRX_ASSET_DATA = zrxAssetData;
    }
}
// solhint-enable max-line-length

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract ReentrancyGuard {

    // Locked state of mutex
    bool private locked = false;

    /// @dev Functions with this modifer cannot be reentered. The mutex will be locked
    ///      before function execution and unlocked after.
    modifier nonReentrant() {
        // Ensure mutex is unlocked
        require(
            !locked,
            "REENTRANCY_ILLEGAL"
        );

        // Lock mutex before function call
        locked = true;

        // Perform function call
        _;

        // Unlock mutex after function call
        locked = false;
    }
}


/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

pragma solidity 0.4.24;


contract SafeMath {

    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(
            c / a == b,
            "UINT256_OVERFLOW"
        );
        return c;
    }

    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a / b;
        return c;
    }

    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        require(
            b <= a,
            "UINT256_UNDERFLOW"
        );
        return a - b;
    }

    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        require(
            c >= a,
            "UINT256_OVERFLOW"
        );
        return c;
    }

    function max64(uint64 a, uint64 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }

    function min64(uint64 a, uint64 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }

    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }

    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
}



contract LibFillResults is
    SafeMath
{
    struct FillResults {
        uint256 makerAssetFilledAmount;  // Total amount of makerAsset(s) filled.
        uint256 takerAssetFilledAmount;  // Total amount of takerAsset(s) filled.
        uint256 makerFeePaid;            // Total amount of ZRX paid by maker(s) to feeRecipient(s).
        uint256 takerFeePaid;            // Total amount of ZRX paid by taker to feeRecipients(s).
    }

    struct MatchedFillResults {
        FillResults left;                    // Amounts filled and fees paid of left order.
        FillResults right;                   // Amounts filled and fees paid of right order.
        uint256 leftMakerAssetSpreadAmount;  // Spread between price of left and right order, denominated in the left order's makerAsset, paid to taker.
    }

    /// @dev Adds properties of both FillResults instances.
    ///      Modifies the first FillResults instance specified.
    /// @param totalFillResults Fill results instance that will be added onto.
    /// @param singleFillResults Fill results instance that will be added to totalFillResults.
    function addFillResults(FillResults memory totalFillResults, FillResults memory singleFillResults)
        internal
        pure
    {
        totalFillResults.makerAssetFilledAmount = safeAdd(totalFillResults.makerAssetFilledAmount, singleFillResults.makerAssetFilledAmount);
        totalFillResults.takerAssetFilledAmount = safeAdd(totalFillResults.takerAssetFilledAmount, singleFillResults.takerAssetFilledAmount);
        totalFillResults.makerFeePaid = safeAdd(totalFillResults.makerFeePaid, singleFillResults.makerFeePaid);
        totalFillResults.takerFeePaid = safeAdd(totalFillResults.takerFeePaid, singleFillResults.takerFeePaid);
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract LibEIP712 {

    // EIP191 header for EIP712 prefix
    string constant internal EIP191_HEADER = "\x19\x01";

    // EIP712 Domain Name value
    string constant internal EIP712_DOMAIN_NAME = "0x Protocol";

    // EIP712 Domain Version value
    string constant internal EIP712_DOMAIN_VERSION = "2";

    // Hash of the EIP712 Domain Separator Schema
    bytes32 constant internal EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH = keccak256(abi.encodePacked(
        "EIP712Domain(",
        "string name,",
        "string version,",
        "address verifyingContract",
        ")"
    ));

    // Hash of the EIP712 Domain Separator data
    // solhint-disable-next-line var-name-mixedcase
    bytes32 public EIP712_DOMAIN_HASH;

    constructor ()
        public
    {
        EIP712_DOMAIN_HASH = keccak256(abi.encodePacked(
            EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH,
            keccak256(bytes(EIP712_DOMAIN_NAME)),
            keccak256(bytes(EIP712_DOMAIN_VERSION)),
            bytes32(address(this))
        ));
    }

    /// @dev Calculates EIP712 encoding for a hash struct in this EIP712 Domain.
    /// @param hashStruct The EIP712 hash struct.
    /// @return EIP712 hash applied to this EIP712 Domain.
    function hashEIP712Message(bytes32 hashStruct)
        internal
        view
        returns (bytes32 result)
    {
        bytes32 eip712DomainHash = EIP712_DOMAIN_HASH;

        // Assembly for more efficient computing:
        // keccak256(abi.encodePacked(
        //     EIP191_HEADER,
        //     EIP712_DOMAIN_HASH,
        //     hashStruct    
        // ));

        assembly {
            // Load free memory pointer
            let memPtr := mload(64)

            mstore(memPtr, 0x1901000000000000000000000000000000000000000000000000000000000000)  // EIP191 header
            mstore(add(memPtr, 2), eip712DomainHash)                                            // EIP712 domain hash
            mstore(add(memPtr, 34), hashStruct)                                                 // Hash of struct

            // Compute hash
            result := keccak256(memPtr, 66)
        }
        return result;
    }
}



contract LibOrder is
    LibEIP712
{
    // Hash for the EIP712 Order Schema
    bytes32 constant internal EIP712_ORDER_SCHEMA_HASH = keccak256(abi.encodePacked(
        "Order(",
        "address makerAddress,",
        "address takerAddress,",
        "address feeRecipientAddress,",
        "address senderAddress,",
        "uint256 makerAssetAmount,",
        "uint256 takerAssetAmount,",
        "uint256 makerFee,",
        "uint256 takerFee,",
        "uint256 expirationTimeSeconds,",
        "uint256 salt,",
        "bytes makerAssetData,",
        "bytes takerAssetData",
        ")"
    ));

    // A valid order remains fillable until it is expired, fully filled, or cancelled.
    // An order's state is unaffected by external factors, like account balances.
    enum OrderStatus {
        INVALID,                     // Default value
        INVALID_MAKER_ASSET_AMOUNT,  // Order does not have a valid maker asset amount
        INVALID_TAKER_ASSET_AMOUNT,  // Order does not have a valid taker asset amount
        FILLABLE,                    // Order is fillable
        EXPIRED,                     // Order has already expired
        FULLY_FILLED,                // Order is fully filled
        CANCELLED                    // Order has been cancelled
    }

    // solhint-disable max-line-length
    struct Order {
        address makerAddress;           // Address that created the order.      
        address takerAddress;           // Address that is allowed to fill the order. If set to 0, any address is allowed to fill the order.          
        address feeRecipientAddress;    // Address that will recieve fees when order is filled.      
        address senderAddress;          // Address that is allowed to call Exchange contract methods that affect this order. If set to 0, any address is allowed to call these methods.
        uint256 makerAssetAmount;       // Amount of makerAsset being offered by maker. Must be greater than 0.        
        uint256 takerAssetAmount;       // Amount of takerAsset being bid on by maker. Must be greater than 0.        
        uint256 makerFee;               // Amount of ZRX paid to feeRecipient by maker when order is filled. If set to 0, no transfer of ZRX from maker to feeRecipient will be attempted.
        uint256 takerFee;               // Amount of ZRX paid to feeRecipient by taker when order is filled. If set to 0, no transfer of ZRX from taker to feeRecipient will be attempted.
        uint256 expirationTimeSeconds;  // Timestamp in seconds at which order expires.          
        uint256 salt;                   // Arbitrary number to facilitate uniqueness of the order's hash.     
        bytes makerAssetData;           // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset. The last byte references the id of this proxy.
        bytes takerAssetData;           // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset. The last byte references the id of this proxy.
    }
    // solhint-enable max-line-length

    struct OrderInfo {
        uint8 orderStatus;                    // Status that describes order's validity and fillability.
        bytes32 orderHash;                    // EIP712 hash of the order (see LibOrder.getOrderHash).
        uint256 orderTakerAssetFilledAmount;  // Amount of order that has already been filled.
    }

    /// @dev Calculates Keccak-256 hash of the order.
    /// @param order The order structure.
    /// @return Keccak-256 EIP712 hash of the order.
    function getOrderHash(Order memory order)
        internal
        view
        returns (bytes32 orderHash)
    {
        orderHash = hashEIP712Message(hashOrder(order));
        return orderHash;
    }

    /// @dev Calculates EIP712 hash of the order.
    /// @param order The order structure.
    /// @return EIP712 hash of the order.
    function hashOrder(Order memory order)
        internal
        pure
        returns (bytes32 result)
    {
        bytes32 schemaHash = EIP712_ORDER_SCHEMA_HASH;
        bytes32 makerAssetDataHash = keccak256(order.makerAssetData);
        bytes32 takerAssetDataHash = keccak256(order.takerAssetData);

        // Assembly for more efficiently computing:
        // keccak256(abi.encodePacked(
        //     EIP712_ORDER_SCHEMA_HASH,
        //     bytes32(order.makerAddress),
        //     bytes32(order.takerAddress),
        //     bytes32(order.feeRecipientAddress),
        //     bytes32(order.senderAddress),
        //     order.makerAssetAmount,
        //     order.takerAssetAmount,
        //     order.makerFee,
        //     order.takerFee,
        //     order.expirationTimeSeconds,
        //     order.salt,
        //     keccak256(order.makerAssetData),
        //     keccak256(order.takerAssetData)
        // ));

        assembly {
            // Calculate memory addresses that will be swapped out before hashing
            let pos1 := sub(order, 32)
            let pos2 := add(order, 320)
            let pos3 := add(order, 352)

            // Backup
            let temp1 := mload(pos1)
            let temp2 := mload(pos2)
            let temp3 := mload(pos3)
            
            // Hash in place
            mstore(pos1, schemaHash)
            mstore(pos2, makerAssetDataHash)
            mstore(pos3, takerAssetDataHash)
            result := keccak256(pos1, 416)
            
            // Restore
            mstore(pos1, temp1)
            mstore(pos2, temp2)
            mstore(pos3, temp3)
        }
        return result;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;




contract LibMath is
    SafeMath
{
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded down.
    function safeGetPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        require(
            !isRoundingErrorFloor(
                numerator,
                denominator,
                target
            ),
            "ROUNDING_ERROR"
        );
        
        partialAmount = safeDiv(
            safeMul(numerator, target),
            denominator
        );
        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded up.
    function safeGetPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        require(
            !isRoundingErrorCeil(
                numerator,
                denominator,
                target
            ),
            "ROUNDING_ERROR"
        );
        
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = safeDiv(
            safeAdd(
                safeMul(numerator, target),
                safeSub(denominator, 1)
            ),
            denominator
        );
        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded down.
    function getPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        partialAmount = safeDiv(
            safeMul(numerator, target),
            denominator
        );
        return partialAmount;
    }
    
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded up.
    function getPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = safeDiv(
            safeAdd(
                safeMul(numerator, target),
                safeSub(denominator, 1)
            ),
            denominator
        );
        return partialAmount;
    }
    
    /// @dev Checks if rounding error >= 0.1% when rounding down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return Rounding error is present.
    function isRoundingErrorFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );
        
        // The absolute rounding error is the difference between the rounded
        // value and the ideal value. The relative rounding error is the
        // absolute rounding error divided by the absolute value of the
        // ideal value. This is undefined when the ideal value is zero.
        //
        // The ideal value is `numerator * target / denominator`.
        // Let's call `numerator * target % denominator` the remainder.
        // The absolute error is `remainder / denominator`.
        //
        // When the ideal value is zero, we require the absolute error to
        // be zero. Fortunately, this is always the case. The ideal value is
        // zero iff `numerator == 0` and/or `target == 0`. In this case the
        // remainder and absolute error are also zero. 
        if (target == 0 || numerator == 0) {
            return false;
        }
        
        // Otherwise, we want the relative rounding error to be strictly
        // less than 0.1%.
        // The relative error is `remainder / (numerator * target)`.
        // We want the relative error less than 1 / 1000:
        //        remainder / (numerator * denominator)  <  1 / 1000
        // or equivalently:
        //        1000 * remainder  <  numerator * target
        // so we have a rounding error iff:
        //        1000 * remainder  >=  numerator * target
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        isError = safeMul(1000, remainder) >= safeMul(numerator, target);
        return isError;
    }
    
    /// @dev Checks if rounding error >= 0.1% when rounding up.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return Rounding error is present.
    function isRoundingErrorCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );
        
        // See the comments in `isRoundingError`.
        if (target == 0 || numerator == 0) {
            // When either is zero, the ideal value and rounded value are zero
            // and there is no rounding error. (Although the relative error
            // is undefined.)
            return false;
        }
        // Compute remainder as before
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        remainder = safeSub(denominator, remainder) % denominator;
        isError = safeMul(1000, remainder) >= safeMul(numerator, target);
        return isError;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;



/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;





contract IExchangeCore {

    /// @dev Cancels all orders created by makerAddress with a salt less than or equal to the targetOrderEpoch
    ///      and senderAddress equal to msg.sender (or null address if msg.sender == makerAddress).
    /// @param targetOrderEpoch Orders created with a salt less or equal to this value will be cancelled.
    function cancelOrdersUpTo(uint256 targetOrderEpoch)
        external;

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev After calling, the order can not be filled anymore.
    /// @param order Order struct containing order specifications.
    function cancelOrder(LibOrder.Order memory order)
        public;

    /// @dev Gets information about an order: status, hash, and amount filled.
    /// @param order Order to gather information on.
    /// @return OrderInfo Information about the order and its state.
    ///                   See LibOrder.OrderInfo for a complete description.
    function getOrderInfo(LibOrder.Order memory order)
        public
        view
        returns (LibOrder.OrderInfo memory orderInfo);
}



contract MExchangeCore is
    IExchangeCore
{
    // Fill event is emitted whenever an order is filled.
    event Fill(
        address indexed makerAddress,         // Address that created the order.      
        address indexed feeRecipientAddress,  // Address that received fees.
        address takerAddress,                 // Address that filled the order.
        address senderAddress,                // Address that called the Exchange contract (msg.sender).
        uint256 makerAssetFilledAmount,       // Amount of makerAsset sold by maker and bought by taker. 
        uint256 takerAssetFilledAmount,       // Amount of takerAsset sold by taker and bought by maker.
        uint256 makerFeePaid,                 // Amount of ZRX paid to feeRecipient by maker.
        uint256 takerFeePaid,                 // Amount of ZRX paid to feeRecipient by taker.
        bytes32 indexed orderHash,            // EIP712 hash of order (see LibOrder.getOrderHash).
        bytes makerAssetData,                 // Encoded data specific to makerAsset. 
        bytes takerAssetData                  // Encoded data specific to takerAsset.
    );

    // Cancel event is emitted whenever an individual order is cancelled.
    event Cancel(
        address indexed makerAddress,         // Address that created the order.      
        address indexed feeRecipientAddress,  // Address that would have recieved fees if order was filled.   
        address senderAddress,                // Address that called the Exchange contract (msg.sender).
        bytes32 indexed orderHash,            // EIP712 hash of order (see LibOrder.getOrderHash).
        bytes makerAssetData,                 // Encoded data specific to makerAsset. 
        bytes takerAssetData                  // Encoded data specific to takerAsset.
    );

    // CancelUpTo event is emitted whenever `cancelOrdersUpTo` is executed succesfully.
    event CancelUpTo(
        address indexed makerAddress,         // Orders cancelled must have been created by this address.
        address indexed senderAddress,        // Orders cancelled must have a `senderAddress` equal to this address.
        uint256 orderEpoch                    // Orders with specified makerAddress and senderAddress with a salt less than this value are considered cancelled.
    );

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderInternal(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev After calling, the order can not be filled anymore.
    /// @param order Order struct containing order specifications.
    function cancelOrderInternal(LibOrder.Order memory order)
        internal;

    /// @dev Updates state with results of a fill order.
    /// @param order that was filled.
    /// @param takerAddress Address of taker who filled the order.
    /// @param orderTakerAssetFilledAmount Amount of order already filled.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function updateFilledState(
        LibOrder.Order memory order,
        address takerAddress,
        bytes32 orderHash,
        uint256 orderTakerAssetFilledAmount,
        LibFillResults.FillResults memory fillResults
    )
        internal;

    /// @dev Updates state with results of cancelling an order.
    ///      State is only updated if the order is currently fillable.
    ///      Otherwise, updating state would have no effect.
    /// @param order that was cancelled.
    /// @param orderHash Hash of order that was cancelled.
    function updateCancelledState(
        LibOrder.Order memory order,
        bytes32 orderHash
    )
        internal;
    
    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    /// @param takerAddress Address of order taker.
    /// @param signature Proof that the orders was created by its maker.
    function assertFillableOrder(
        LibOrder.Order memory order,
        LibOrder.OrderInfo memory orderInfo,
        address takerAddress,
        bytes memory signature
    )
        internal
        view;
    
    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo Status, orderHash, and amount already filled of order.
    /// @param takerAssetFillAmount Desired amount of order to fill by taker.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @param makerAssetFilledAmount Amount of makerAsset that will be transfered.
    function assertValidFill(
        LibOrder.Order memory order,
        LibOrder.OrderInfo memory orderInfo,
        uint256 takerAssetFillAmount,
        uint256 takerAssetFilledAmount,
        uint256 makerAssetFilledAmount
    )
        internal
        view;

    /// @dev Validates context for cancelOrder. Succeeds or throws.
    /// @param order to be cancelled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    function assertValidCancel(
        LibOrder.Order memory order,
        LibOrder.OrderInfo memory orderInfo
    )
        internal
        view;

    /// @dev Calculates amounts filled and fees paid by maker and taker.
    /// @param order to be filled.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function calculateFillResults(
        LibOrder.Order memory order,
        uint256 takerAssetFilledAmount
    )
        internal
        pure
        returns (LibFillResults.FillResults memory fillResults);

}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract ISignatureValidator {

    /// @dev Approves a hash on-chain using any valid signature type.
    ///      After presigning a hash, the preSign signature type will become valid for that hash and signer.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    function preSign(
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        external;
    
    /// @dev Approves/unnapproves a Validator contract to verify signatures on signer's behalf.
    /// @param validatorAddress Address of Validator contract.
    /// @param approval Approval or disapproval of  Validator contract.
    function setSignatureValidatorApproval(
        address validatorAddress,
        bool approval
    )
        external;

    /// @dev Verifies that a signature is valid.
    /// @param hash Message hash that is signed.
    /// @param signerAddress Address of signer.
    /// @param signature Proof of signing.
    /// @return Validity of order signature.
    function isValidSignature(
        bytes32 hash,
        address signerAddress,
        bytes memory signature
    )
        public
        view
        returns (bool isValid);
}



contract MSignatureValidator is
    ISignatureValidator
{
    event SignatureValidatorApproval(
        address indexed signerAddress,     // Address that approves or disapproves a contract to verify signatures.
        address indexed validatorAddress,  // Address of signature validator contract.
        bool approved                      // Approval or disapproval of validator contract.
    );

    // Allowed signature types.
    enum SignatureType {
        Illegal,         // 0x00, default value
        Invalid,         // 0x01
        EIP712,          // 0x02
        EthSign,         // 0x03
        Wallet,          // 0x04
        Validator,       // 0x05
        PreSigned,       // 0x06
        NSignatureTypes  // 0x07, number of signature types. Always leave at end.
    }

    /// @dev Verifies signature using logic defined by Wallet contract.
    /// @param hash Any 32 byte hash.
    /// @param walletAddress Address that should have signed the given hash
    ///                      and defines its own signature verification method.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidWalletSignature(
        bytes32 hash,
        address walletAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid);

    /// @dev Verifies signature using logic defined by Validator contract.
    /// @param validatorAddress Address of validator contract.
    /// @param hash Any 32 byte hash.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidValidatorSignature(
        address validatorAddress,
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;


contract ITransactions {

    /// @dev Executes an exchange method call in the context of signer.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @param signature Proof of signer transaction by signer.
    function executeTransaction(
        uint256 salt,
        address signerAddress,
        bytes data,
        bytes signature
    )
        external;
}



contract MTransactions is
    ITransactions
{
    // Hash for the EIP712 ZeroEx Transaction Schema
    bytes32 constant internal EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH = keccak256(abi.encodePacked(
        "ZeroExTransaction(",
        "uint256 salt,",
        "address signerAddress,",
        "bytes data",
        ")"
    ));

    /// @dev Calculates EIP712 hash of the Transaction.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @return EIP712 hash of the Transaction.
    function hashZeroExTransaction(
        uint256 salt,
        address signerAddress,
        bytes memory data
    )
        internal
        pure
        returns (bytes32 result);

    /// @dev The current function will be called in the context of this address (either 0x transaction signer or `msg.sender`).
    ///      If calling a fill function, this address will represent the taker.
    ///      If calling a cancel function, this address will represent the maker.
    /// @return Signer of 0x transaction if entry point is `executeTransaction`.
    ///         `msg.sender` if entry point is any other function.
    function getCurrentContextAddress()
        internal
        view
        returns (address);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract IAssetProxyDispatcher {

    /// @dev Registers an asset proxy to its asset proxy id.
    ///      Once an asset proxy is registered, it cannot be unregistered.
    /// @param assetProxy Address of new asset proxy to register.
    function registerAssetProxy(address assetProxy)
        external;

    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address);
}



contract MAssetProxyDispatcher is
    IAssetProxyDispatcher
{
    // Logs registration of new asset proxy
    event AssetProxyRegistered(
        bytes4 id,              // Id of new registered AssetProxy.
        address assetProxy      // Address of new registered AssetProxy.
    );

    /// @dev Forwards arguments to assetProxy and calls `transferFrom`. Either succeeds or throws.
    /// @param assetData Byte array encoded for the asset.
    /// @param from Address to transfer token from.
    /// @param to Address to transfer token to.
    /// @param amount Amount of token to transfer.
    function dispatchTransferFrom(
        bytes memory assetData,
        address from,
        address to,
        uint256 amount
    )
        internal;
}



contract MixinExchangeCore is
    ReentrancyGuard,
    LibConstants,
    LibMath,
    LibOrder,
    LibFillResults,
    MAssetProxyDispatcher,
    MExchangeCore,
    MSignatureValidator,
    MTransactions
{
    // Mapping of orderHash => amount of takerAsset already bought by maker
    mapping (bytes32 => uint256) public filled;

    // Mapping of orderHash => cancelled
    mapping (bytes32 => bool) public cancelled;

    // Mapping of makerAddress => senderAddress => lowest salt an order can have in order to be fillable
    // Orders with specified senderAddress and with a salt less than their epoch are considered cancelled
    mapping (address => mapping (address => uint256)) public orderEpoch;

    /// @dev Cancels all orders created by makerAddress with a salt less than or equal to the targetOrderEpoch
    ///      and senderAddress equal to msg.sender (or null address if msg.sender == makerAddress).
    /// @param targetOrderEpoch Orders created with a salt less or equal to this value will be cancelled.
    function cancelOrdersUpTo(uint256 targetOrderEpoch)
        external
        nonReentrant
    {
        address makerAddress = getCurrentContextAddress();
        // If this function is called via `executeTransaction`, we only update the orderEpoch for the makerAddress/msg.sender combination.
        // This allows external filter contracts to add rules to how orders are cancelled via this function.
        address senderAddress = makerAddress == msg.sender ? address(0) : msg.sender;

        // orderEpoch is initialized to 0, so to cancelUpTo we need salt + 1
        uint256 newOrderEpoch = targetOrderEpoch + 1;
        uint256 oldOrderEpoch = orderEpoch[makerAddress][senderAddress];

        // Ensure orderEpoch is monotonically increasing
        require(
            newOrderEpoch > oldOrderEpoch,
            "INVALID_NEW_ORDER_EPOCH"
        );

        // Update orderEpoch
        orderEpoch[makerAddress][senderAddress] = newOrderEpoch;
        emit CancelUpTo(
            makerAddress,
            senderAddress,
            newOrderEpoch
        );
    }

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrder(
        Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        nonReentrant
        returns (FillResults memory fillResults)
    {
        fillResults = fillOrderInternal(
            order,
            takerAssetFillAmount,
            signature
        );
        return fillResults;
    }

    /// @dev After calling, the order can not be filled anymore.
    ///      Throws if order is invalid or sender does not have permission to cancel.
    /// @param order Order to cancel. Order must be OrderStatus.FILLABLE.
    function cancelOrder(Order memory order)
        public
        nonReentrant
    {
        cancelOrderInternal(order);
    }

    /// @dev Gets information about an order: status, hash, and amount filled.
    /// @param order Order to gather information on.
    /// @return OrderInfo Information about the order and its state.
    ///         See LibOrder.OrderInfo for a complete description.
    function getOrderInfo(Order memory order)
        public
        view
        returns (OrderInfo memory orderInfo)
    {
        // Compute the order hash
        orderInfo.orderHash = getOrderHash(order);

        // Fetch filled amount
        orderInfo.orderTakerAssetFilledAmount = filled[orderInfo.orderHash];

        // If order.makerAssetAmount is zero, we also reject the order.
        // While the Exchange contract handles them correctly, they create
        // edge cases in the supporting infrastructure because they have
        // an 'infinite' price when computed by a simple division.
        if (order.makerAssetAmount == 0) {
            orderInfo.orderStatus = uint8(OrderStatus.INVALID_MAKER_ASSET_AMOUNT);
            return orderInfo;
        }

        // If order.takerAssetAmount is zero, then the order will always
        // be considered filled because 0 == takerAssetAmount == orderTakerAssetFilledAmount
        // Instead of distinguishing between unfilled and filled zero taker
        // amount orders, we choose not to support them.
        if (order.takerAssetAmount == 0) {
            orderInfo.orderStatus = uint8(OrderStatus.INVALID_TAKER_ASSET_AMOUNT);
            return orderInfo;
        }

        // Validate order availability
        if (orderInfo.orderTakerAssetFilledAmount >= order.takerAssetAmount) {
            orderInfo.orderStatus = uint8(OrderStatus.FULLY_FILLED);
            return orderInfo;
        }

        // Validate order expiration
        // solhint-disable-next-line not-rely-on-time
        if (block.timestamp >= order.expirationTimeSeconds) {
            orderInfo.orderStatus = uint8(OrderStatus.EXPIRED);
            return orderInfo;
        }

        // Check if order has been cancelled
        if (cancelled[orderInfo.orderHash]) {
            orderInfo.orderStatus = uint8(OrderStatus.CANCELLED);
            return orderInfo;
        }
        if (orderEpoch[order.makerAddress][order.senderAddress] > order.salt) {
            orderInfo.orderStatus = uint8(OrderStatus.CANCELLED);
            return orderInfo;
        }

        // All other statuses are ruled out: order is Fillable
        orderInfo.orderStatus = uint8(OrderStatus.FILLABLE);
        return orderInfo;
    }

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderInternal(
        Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (FillResults memory fillResults)
    {
        // Fetch order info
        OrderInfo memory orderInfo = getOrderInfo(order);

        // Fetch taker address
        address takerAddress = getCurrentContextAddress();

        // Assert that the order is fillable by taker
        assertFillableOrder(
            order,
            orderInfo,
            takerAddress,
            signature
        );

        // Get amount of takerAsset to fill
        uint256 remainingTakerAssetAmount = safeSub(order.takerAssetAmount, orderInfo.orderTakerAssetFilledAmount);
        uint256 takerAssetFilledAmount = min256(takerAssetFillAmount, remainingTakerAssetAmount);

        // Validate context
        assertValidFill(
            order,
            orderInfo,
            takerAssetFillAmount,
            takerAssetFilledAmount,
            fillResults.makerAssetFilledAmount
        );

        // Compute proportional fill amounts
        fillResults = calculateFillResults(order, takerAssetFilledAmount);

        // Update exchange internal state
        updateFilledState(
            order,
            takerAddress,
            orderInfo.orderHash,
            orderInfo.orderTakerAssetFilledAmount,
            fillResults
        );

        // Settle order
        settleOrder(
            order,
            takerAddress,
            fillResults
        );

        return fillResults;
    }

    /// @dev After calling, the order can not be filled anymore.
    ///      Throws if order is invalid or sender does not have permission to cancel.
    /// @param order Order to cancel. Order must be OrderStatus.FILLABLE.
    function cancelOrderInternal(Order memory order)
        internal
    {
        // Fetch current order status
        OrderInfo memory orderInfo = getOrderInfo(order);

        // Validate context
        assertValidCancel(order, orderInfo);

        // Perform cancel
        updateCancelledState(order, orderInfo.orderHash);
    }

    /// @dev Updates state with results of a fill order.
    /// @param order that was filled.
    /// @param takerAddress Address of taker who filled the order.
    /// @param orderTakerAssetFilledAmount Amount of order already filled.
    function updateFilledState(
        Order memory order,
        address takerAddress,
        bytes32 orderHash,
        uint256 orderTakerAssetFilledAmount,
        FillResults memory fillResults
    )
        internal
    {
        // Update state
        filled[orderHash] = safeAdd(orderTakerAssetFilledAmount, fillResults.takerAssetFilledAmount);

        // Log order
        emit Fill(
            order.makerAddress,
            order.feeRecipientAddress,
            takerAddress,
            msg.sender,
            fillResults.makerAssetFilledAmount,
            fillResults.takerAssetFilledAmount,
            fillResults.makerFeePaid,
            fillResults.takerFeePaid,
            orderHash,
            order.makerAssetData,
            order.takerAssetData
        );
    }

    /// @dev Updates state with results of cancelling an order.
    ///      State is only updated if the order is currently fillable.
    ///      Otherwise, updating state would have no effect.
    /// @param order that was cancelled.
    /// @param orderHash Hash of order that was cancelled.
    function updateCancelledState(
        Order memory order,
        bytes32 orderHash
    )
        internal
    {
        // Perform cancel
        cancelled[orderHash] = true;

        // Log cancel
        emit Cancel(
            order.makerAddress,
            order.feeRecipientAddress,
            msg.sender,
            orderHash,
            order.makerAssetData,
            order.takerAssetData
        );
    }

    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    /// @param takerAddress Address of order taker.
    /// @param signature Proof that the orders was created by its maker.
    function assertFillableOrder(
        Order memory order,
        OrderInfo memory orderInfo,
        address takerAddress,
        bytes memory signature
    )
        internal
        view
    {
        // An order can only be filled if its status is FILLABLE.
        require(
            orderInfo.orderStatus == uint8(OrderStatus.FILLABLE),
            "ORDER_UNFILLABLE"
        );

        // Validate sender is allowed to fill this order
        if (order.senderAddress != address(0)) {
            require(
                order.senderAddress == msg.sender,
                "INVALID_SENDER"
            );
        }

        // Validate taker is allowed to fill this order
        if (order.takerAddress != address(0)) {
            require(
                order.takerAddress == takerAddress,
                "INVALID_TAKER"
            );
        }

        // Validate Maker signature (check only if first time seen)
        if (orderInfo.orderTakerAssetFilledAmount == 0) {
            require(
                isValidSignature(
                    orderInfo.orderHash,
                    order.makerAddress,
                    signature
                ),
                "INVALID_ORDER_SIGNATURE"
            );
        }
    }

    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    /// @param takerAssetFillAmount Desired amount of order to fill by taker.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @param makerAssetFilledAmount Amount of makerAsset that will be transfered.
    function assertValidFill(
        Order memory order,
        OrderInfo memory orderInfo,
        uint256 takerAssetFillAmount,  // TODO: use FillResults
        uint256 takerAssetFilledAmount,
        uint256 makerAssetFilledAmount
    )
        internal
        view
    {
        // Revert if fill amount is invalid
        // TODO: reconsider necessity for v2.1
        require(
            takerAssetFillAmount != 0,
            "INVALID_TAKER_AMOUNT"
        );

        // Make sure taker does not pay more than desired amount
        // NOTE: This assertion should never fail, it is here
        //       as an extra defence against potential bugs.
        require(
            takerAssetFilledAmount <= takerAssetFillAmount,
            "TAKER_OVERPAY"
        );

        // Make sure order is not overfilled
        // NOTE: This assertion should never fail, it is here
        //       as an extra defence against potential bugs.
        require(
            safeAdd(orderInfo.orderTakerAssetFilledAmount, takerAssetFilledAmount) <= order.takerAssetAmount,
            "ORDER_OVERFILL"
        );

        // Make sure order is filled at acceptable price.
        // The order has an implied price from the makers perspective:
        //    order price = order.makerAssetAmount / order.takerAssetAmount
        // i.e. the number of makerAsset maker is paying per takerAsset. The
        // maker is guaranteed to get this price or a better (lower) one. The
        // actual price maker is getting in this fill is:
        //    fill price = makerAssetFilledAmount / takerAssetFilledAmount
        // We need `fill price <= order price` for the fill to be fair to maker.
        // This amounts to:
        //     makerAssetFilledAmount        order.makerAssetAmount
        //    ------------------------  <=  -----------------------
        //     takerAssetFilledAmount        order.takerAssetAmount
        // or, equivalently:
        //     makerAssetFilledAmount * order.takerAssetAmount <=
        //     order.makerAssetAmount * takerAssetFilledAmount
        // NOTE: This assertion should never fail, it is here
        //       as an extra defence against potential bugs.
        require(
            safeMul(makerAssetFilledAmount, order.takerAssetAmount)
            <=
            safeMul(order.makerAssetAmount, takerAssetFilledAmount),
            "INVALID_FILL_PRICE"
        );
    }

    /// @dev Validates context for cancelOrder. Succeeds or throws.
    /// @param order to be cancelled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    function assertValidCancel(
        Order memory order,
        OrderInfo memory orderInfo
    )
        internal
        view
    {
        // Ensure order is valid
        // An order can only be cancelled if its status is FILLABLE.
        require(
            orderInfo.orderStatus == uint8(OrderStatus.FILLABLE),
            "ORDER_UNFILLABLE"
        );

        // Validate sender is allowed to cancel this order
        if (order.senderAddress != address(0)) {
            require(
                order.senderAddress == msg.sender,
                "INVALID_SENDER"
            );
        }

        // Validate transaction signed by maker
        address makerAddress = getCurrentContextAddress();
        require(
            order.makerAddress == makerAddress,
            "INVALID_MAKER"
        );
    }

    /// @dev Calculates amounts filled and fees paid by maker and taker.
    /// @param order to be filled.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function calculateFillResults(
        Order memory order,
        uint256 takerAssetFilledAmount
    )
        internal
        pure
        returns (FillResults memory fillResults)
    {
        // Compute proportional transfer amounts
        fillResults.takerAssetFilledAmount = takerAssetFilledAmount;
        fillResults.makerAssetFilledAmount = safeGetPartialAmountFloor(
            takerAssetFilledAmount,
            order.takerAssetAmount,
            order.makerAssetAmount
        );
        fillResults.makerFeePaid = safeGetPartialAmountFloor(
            fillResults.makerAssetFilledAmount,
            order.makerAssetAmount,
            order.makerFee
        );
        fillResults.takerFeePaid = safeGetPartialAmountFloor(
            takerAssetFilledAmount,
            order.takerAssetAmount,
            order.takerFee
        );

        return fillResults;
    }

    /// @dev Settles an order by transferring assets between counterparties.
    /// @param order Order struct containing order specifications.
    /// @param takerAddress Address selling takerAsset and buying makerAsset.
    /// @param fillResults Amounts to be filled and fees paid by maker and taker.
    function settleOrder(
        LibOrder.Order memory order,
        address takerAddress,
        LibFillResults.FillResults memory fillResults
    )
        private
    {
        bytes memory zrxAssetData = ZRX_ASSET_DATA;
        dispatchTransferFrom(
            order.makerAssetData,
            order.makerAddress,
            takerAddress,
            fillResults.makerAssetFilledAmount
        );
        dispatchTransferFrom(
            order.takerAssetData,
            takerAddress,
            order.makerAddress,
            fillResults.takerAssetFilledAmount
        );
        dispatchTransferFrom(
            zrxAssetData,
            order.makerAddress,
            order.feeRecipientAddress,
            fillResults.makerFeePaid
        );
        dispatchTransferFrom(
            zrxAssetData,
            takerAddress,
            order.feeRecipientAddress,
            fillResults.takerFeePaid
        );
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


library LibBytes {

    using LibBytes for bytes;

    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }

    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }

            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)

                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)

                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)

                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)

                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }

    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        require(
            from <= to,
            "FROM_LESS_THAN_TO_REQUIRED"
        );
        require(
            to < b.length,
            "TO_LESS_THAN_LENGTH_REQUIRED"
        );
        
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    
    /// @dev Returns a slice from a byte array without preserving the input.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    /// @dev When `from == 0`, the original array will match the slice. In other cases its state will be corrupted.
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        require(
            from <= to,
            "FROM_LESS_THAN_TO_REQUIRED"
        );
        require(
            to < b.length,
            "TO_LESS_THAN_LENGTH_REQUIRED"
        );
        
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }

    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        require(
            b.length > 0,
            "GREATER_THAN_ZERO_LENGTH_REQUIRED"
        );

        // Store last byte.
        result = b[b.length - 1];

        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }

    /// @dev Pops the last 20 bytes off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return The 20 byte address that was popped off.
    function popLast20Bytes(bytes memory b)
        internal
        pure
        returns (address result)
    {
        require(
            b.length >= 20,
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );

        // Store last 20 bytes.
        result = readAddress(b, b.length - 20);

        assembly {
            // Subtract 20 from byte array length.
            let newLen := sub(mload(b), 20)
            mstore(b, newLen)
        }
        return result;
    }

    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }

    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        require(
            b.length >= index + 20,  // 20 is length of address
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );

        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;

        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }

    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        require(
            b.length >= index + 20,  // 20 is length of address
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );

        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;

        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.

            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)

            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }

    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        require(
            b.length >= index + 32,
            "GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED"
        );

        // Arrays are prefixed by a 256 bit length parameter
        index += 32;

        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }

    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        require(
            b.length >= index + 32,
            "GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED"
        );

        // Arrays are prefixed by a 256 bit length parameter
        index += 32;

        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }

    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }

    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }

    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        require(
            b.length >= index + 4,
            "GREATER_OR_EQUAL_TO_4_LENGTH_REQUIRED"
        );

        // Arrays are prefixed by a 32 byte length field
        index += 32;

        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }

    /// @dev Reads nested bytes from a specific position.
    /// @dev NOTE: the returned value overlaps with the input value.
    ///            Both should be treated as immutable.
    /// @param b Byte array containing nested bytes.
    /// @param index Index of nested bytes.
    /// @return result Nested bytes.
    function readBytesWithLength(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Read length of nested bytes
        uint256 nestedBytesLength = readUint256(b, index);
        index += 32;

        // Assert length of <b> is valid, given
        // length of nested bytes
        require(
            b.length >= index + nestedBytesLength,
            "GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED"
        );
        
        // Return a pointer to the byte array as it exists inside `b`
        assembly {
            result := add(b, index)
        }
        return result;
    }

    /// @dev Inserts bytes at a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes to insert.
    function writeBytesWithLength(
        bytes memory b,
        uint256 index,
        bytes memory input
    )
        internal
        pure
    {
        // Assert length of <b> is valid, given
        // length of input
        require(
            b.length >= index + 32 + input.length,  // 32 bytes to store length
            "GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED"
        );

        // Copy <input> into <b>
        memCopy(
            b.contentAddress() + index,
            input.rawAddress(), // includes length of <input>
            input.length + 32   // +32 bytes to store <input> length
        );
    }

    /// @dev Performs a deep copy of a byte array onto another byte array of greater than or equal length.
    /// @param dest Byte array that will be overwritten with source bytes.
    /// @param source Byte array to copy onto dest bytes.
    function deepCopyBytes(
        bytes memory dest,
        bytes memory source
    )
        internal
        pure
    {
        uint256 sourceLen = source.length;
        // Dest length must be >= source length, or some bytes would not be copied.
        require(
            dest.length >= sourceLen,
            "GREATER_OR_EQUAL_TO_SOURCE_BYTES_LENGTH_REQUIRED"
        );
        memCopy(
            dest.contentAddress(),
            source.contentAddress(),
            sourceLen
        );
    }
}




/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract IWallet {

    /// @dev Verifies that a signature is valid.
    /// @param hash Message hash that is signed.
    /// @param signature Proof of signing.
    /// @return Validity of order signature.
    function isValidSignature(
        bytes32 hash,
        bytes signature
    )
        external
        view
        returns (bool isValid);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract IValidator {

    /// @dev Verifies that a signature is valid.
    /// @param hash Message hash that is signed.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof of signing.
    /// @return Validity of order signature.
    function isValidSignature(
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        external
        view
        returns (bool isValid);
}



contract MixinSignatureValidator is
    ReentrancyGuard,
    MSignatureValidator,
    MTransactions
{
    using LibBytes for bytes;

    // Mapping of hash => signer => signed
    mapping (bytes32 => mapping (address => bool)) public preSigned;

    // Mapping of signer => validator => approved
    mapping (address => mapping (address => bool)) public allowedValidators;

    /// @dev Approves a hash on-chain using any valid signature type.
    ///      After presigning a hash, the preSign signature type will become valid for that hash and signer.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    function preSign(
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        external
    {
        if (signerAddress != msg.sender) {
            require(
                isValidSignature(
                    hash,
                    signerAddress,
                    signature
                ),
                "INVALID_SIGNATURE"
            );
        }
        preSigned[hash][signerAddress] = true;
    }

    /// @dev Approves/unnapproves a Validator contract to verify signatures on signer's behalf.
    /// @param validatorAddress Address of Validator contract.
    /// @param approval Approval or disapproval of  Validator contract.
    function setSignatureValidatorApproval(
        address validatorAddress,
        bool approval
    )
        external
        nonReentrant
    {
        address signerAddress = getCurrentContextAddress();
        allowedValidators[signerAddress][validatorAddress] = approval;
        emit SignatureValidatorApproval(
            signerAddress,
            validatorAddress,
            approval
        );
    }

    /// @dev Verifies that a hash has been signed by the given signer.
    /// @param hash Any 32 byte hash.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidSignature(
        bytes32 hash,
        address signerAddress,
        bytes memory signature
    )
        public
        view
        returns (bool isValid)
    {
        require(
            signature.length > 0,
            "LENGTH_GREATER_THAN_0_REQUIRED"
        );

        // Pop last byte off of signature byte array.
        uint8 signatureTypeRaw = uint8(signature.popLastByte());

        // Ensure signature is supported
        require(
            signatureTypeRaw < uint8(SignatureType.NSignatureTypes),
            "SIGNATURE_UNSUPPORTED"
        );

        SignatureType signatureType = SignatureType(signatureTypeRaw);

        // Variables are not scoped in Solidity.
        uint8 v;
        bytes32 r;
        bytes32 s;
        address recovered;

        // Always illegal signature.
        // This is always an implicit option since a signer can create a
        // signature array with invalid type or length. We may as well make
        // it an explicit option. This aids testing and analysis. It is
        // also the initialization value for the enum type.
        if (signatureType == SignatureType.Illegal) {
            revert("SIGNATURE_ILLEGAL");

        // Always invalid signature.
        // Like Illegal, this is always implicitly available and therefore
        // offered explicitly. It can be implicitly created by providing
        // a correctly formatted but incorrect signature.
        } else if (signatureType == SignatureType.Invalid) {
            require(
                signature.length == 0,
                "LENGTH_0_REQUIRED"
            );
            isValid = false;
            return isValid;

        // Signature using EIP712
        } else if (signatureType == SignatureType.EIP712) {
            require(
                signature.length == 65,
                "LENGTH_65_REQUIRED"
            );
            v = uint8(signature[0]);
            r = signature.readBytes32(1);
            s = signature.readBytes32(33);
            recovered = ecrecover(
                hash,
                v,
                r,
                s
            );
            isValid = signerAddress == recovered;
            return isValid;

        // Signed using web3.eth_sign
        } else if (signatureType == SignatureType.EthSign) {
            require(
                signature.length == 65,
                "LENGTH_65_REQUIRED"
            );
            v = uint8(signature[0]);
            r = signature.readBytes32(1);
            s = signature.readBytes32(33);
            recovered = ecrecover(
                keccak256(abi.encodePacked(
                    "\x19Ethereum Signed Message:\n32",
                    hash
                )),
                v,
                r,
                s
            );
            isValid = signerAddress == recovered;
            return isValid;

        // Signature verified by wallet contract.
        // If used with an order, the maker of the order is the wallet contract.
        } else if (signatureType == SignatureType.Wallet) {
            isValid = isValidWalletSignature(
                hash,
                signerAddress,
                signature
            );
            return isValid;

        // Signature verified by validator contract.
        // If used with an order, the maker of the order can still be an EOA.
        // A signature using this type should be encoded as:
        // | Offset   | Length | Contents                        |
        // | 0x00     | x      | Signature to validate           |
        // | 0x00 + x | 20     | Address of validator contract   |
        // | 0x14 + x | 1      | Signature type is always "\x06" |
        } else if (signatureType == SignatureType.Validator) {
            // Pop last 20 bytes off of signature byte array.
            address validatorAddress = signature.popLast20Bytes();

            // Ensure signer has approved validator.
            if (!allowedValidators[signerAddress][validatorAddress]) {
                return false;
            }
            isValid = isValidValidatorSignature(
                validatorAddress,
                hash,
                signerAddress,
                signature
            );
            return isValid;

        // Signer signed hash previously using the preSign function.
        } else if (signatureType == SignatureType.PreSigned) {
            isValid = preSigned[hash][signerAddress];
            return isValid;
        }

        // Anything else is illegal (We do not return false because
        // the signature may actually be valid, just not in a format
        // that we currently support. In this case returning false
        // may lead the caller to incorrectly believe that the
        // signature was invalid.)
        revert("SIGNATURE_UNSUPPORTED");
    }

    /// @dev Verifies signature using logic defined by Wallet contract.
    /// @param hash Any 32 byte hash.
    /// @param walletAddress Address that should have signed the given hash
    ///                      and defines its own signature verification method.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if signature is valid for given wallet..
    function isValidWalletSignature(
        bytes32 hash,
        address walletAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid)
    {
        bytes memory calldata = abi.encodeWithSelector(
            IWallet(walletAddress).isValidSignature.selector,
            hash,
            signature
        );
        bytes32 magic_salt = bytes32(bytes4(keccak256("isValidWalletSignature(bytes32,address,bytes)")));
        assembly {
            if iszero(extcodesize(walletAddress)) {
                // Revert with `Error("WALLET_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000c57414c4c45545f4552524f5200000000000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            let cdStart := add(calldata, 32)
            let success := staticcall(
                gas,              // forward all gas
                walletAddress,    // address of Wallet contract
                cdStart,          // pointer to start of input
                mload(calldata),  // length of input
                cdStart,          // write output over input
                32                // output size is 32 bytes
            )

            if iszero(eq(returndatasize(), 32)) {
                // Revert with `Error("WALLET_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000c57414c4c45545f4552524f5200000000000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            switch success
            case 0 {
                // Revert with `Error("WALLET_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000c57414c4c45545f4552524f5200000000000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }
            case 1 {
                // Signature is valid if call did not revert and returned true
                isValid := eq(
                    and(mload(cdStart), 0xffffffff00000000000000000000000000000000000000000000000000000000),
                    and(magic_salt, 0xffffffff00000000000000000000000000000000000000000000000000000000)
                )
            }
        }
        return isValid;
    }

    /// @dev Verifies signature using logic defined by Validator contract.
    /// @param validatorAddress Address of validator contract.
    /// @param hash Any 32 byte hash.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidValidatorSignature(
        address validatorAddress,
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid)
    {
        bytes memory calldata = abi.encodeWithSelector(
            IValidator(signerAddress).isValidSignature.selector,
            hash,
            signerAddress,
            signature
        );
        bytes32 magic_salt = bytes32(bytes4(keccak256("isValidValidatorSignature(address,bytes32,address,bytes)")));
        assembly {
            if iszero(extcodesize(validatorAddress)) {
                // Revert with `Error("VALIDATOR_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f56414c494441544f525f4552524f5200000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            let cdStart := add(calldata, 32)
            let success := staticcall(
                gas,               // forward all gas
                validatorAddress,  // address of Validator contract
                cdStart,           // pointer to start of input
                mload(calldata),   // length of input
                cdStart,           // write output over input
                32                 // output size is 32 bytes
            )

            if iszero(eq(returndatasize(), 32)) {
                // Revert with `Error("VALIDATOR_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f56414c494441544f525f4552524f5200000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            switch success
            case 0 {
                // Revert with `Error("VALIDATOR_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f56414c494441544f525f4552524f5200000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }
            case 1 {
                // Signature is valid if call did not revert and returned true
                isValid := eq(
                    and(mload(cdStart), 0xffffffff00000000000000000000000000000000000000000000000000000000),
                    and(magic_salt, 0xffffffff00000000000000000000000000000000000000000000000000000000)
                )
            }
        }
        return isValid;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;





/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;




contract LibAbiEncoder {

    /// @dev ABI encodes calldata for `fillOrder`.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return ABI encoded calldata for `fillOrder`.
    function abiEncodeFillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        pure
        returns (bytes memory fillOrderCalldata)
    {
        // We need to call MExchangeCore.fillOrder using a delegatecall in
        // assembly so that we can intercept a call that throws. For this, we
        // need the input encoded in memory in the Ethereum ABIv2 format [1].

        // | Area     | Offset | Length  | Contents                                    |
        // | -------- |--------|---------|-------------------------------------------- |
        // | Header   | 0x00   | 4       | function selector                           |
        // | Params   |        | 3 * 32  | function parameters:                        |
        // |          | 0x00   |         |   1. offset to order (*)                    |
        // |          | 0x20   |         |   2. takerAssetFillAmount                   |
        // |          | 0x40   |         |   3. offset to signature (*)                |
        // | Data     |        | 12 * 32 | order:                                      |
        // |          | 0x000  |         |   1.  senderAddress                         |
        // |          | 0x020  |         |   2.  makerAddress                          |
        // |          | 0x040  |         |   3.  takerAddress                          |
        // |          | 0x060  |         |   4.  feeRecipientAddress                   |
        // |          | 0x080  |         |   5.  makerAssetAmount                      |
        // |          | 0x0A0  |         |   6.  takerAssetAmount                      |
        // |          | 0x0C0  |         |   7.  makerFeeAmount                        |
        // |          | 0x0E0  |         |   8.  takerFeeAmount                        |
        // |          | 0x100  |         |   9.  expirationTimeSeconds                 |
        // |          | 0x120  |         |   10. salt                                  |
        // |          | 0x140  |         |   11. Offset to makerAssetData (*)          |
        // |          | 0x160  |         |   12. Offset to takerAssetData (*)          |
        // |          | 0x180  | 32      | makerAssetData Length                       |
        // |          | 0x1A0  | **      | makerAssetData Contents                     |
        // |          | 0x1C0  | 32      | takerAssetData Length                       |
        // |          | 0x1E0  | **      | takerAssetData Contents                     |
        // |          | 0x200  | 32      | signature Length                            |
        // |          | 0x220  | **      | signature Contents                          |

        // * Offsets are calculated from the beginning of the current area: Header, Params, Data:
        //     An offset stored in the Params area is calculated from the beginning of the Params section.
        //     An offset stored in the Data area is calculated from the beginning of the Data section.

        // ** The length of dynamic array contents are stored in the field immediately preceeding the contents.

        // [1]: https://solidity.readthedocs.io/en/develop/abi-spec.html

        assembly {

            // Areas below may use the following variables:
            //   1. <area>Start   -- Start of this area in memory
            //   2. <area>End     -- End of this area in memory. This value may
            //                       be precomputed (before writing contents),
            //                       or it may be computed as contents are written.
            //   3. <area>Offset  -- Current offset into area. If an area's End
            //                       is precomputed, this variable tracks the
            //                       offsets of contents as they are written.

            /////// Setup Header Area ///////
            // Load free memory pointer
            fillOrderCalldata := mload(0x40)
            // bytes4(keccak256("fillOrder((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),uint256,bytes)"))
            // = 0xb4be83d5
            // Leave 0x20 bytes to store the length
            mstore(add(fillOrderCalldata, 0x20), 0xb4be83d500000000000000000000000000000000000000000000000000000000)
            let headerAreaEnd := add(fillOrderCalldata, 0x24)

            /////// Setup Params Area ///////
            // This area is preallocated and written to later.
            // This is because we need to fill in offsets that have not yet been calculated.
            let paramsAreaStart := headerAreaEnd
            let paramsAreaEnd := add(paramsAreaStart, 0x60)
            let paramsAreaOffset := paramsAreaStart

            /////// Setup Data Area ///////
            let dataAreaStart := paramsAreaEnd
            let dataAreaEnd := dataAreaStart

            // Offset from the source data we're reading from
            let sourceOffset := order
            // arrayLenBytes and arrayLenWords track the length of a dynamically-allocated bytes array.
            let arrayLenBytes := 0
            let arrayLenWords := 0

            /////// Write order Struct ///////
            // Write memory location of Order, relative to the start of the
            // parameter list, then increment the paramsAreaOffset respectively.
            mstore(paramsAreaOffset, sub(dataAreaEnd, paramsAreaStart))
            paramsAreaOffset := add(paramsAreaOffset, 0x20)

            // Write values for each field in the order
            // It would be nice to use a loop, but we save on gas by writing
            // the stores sequentially.
            mstore(dataAreaEnd, mload(sourceOffset))                            // makerAddress
            mstore(add(dataAreaEnd, 0x20), mload(add(sourceOffset, 0x20)))      // takerAddress
            mstore(add(dataAreaEnd, 0x40), mload(add(sourceOffset, 0x40)))      // feeRecipientAddress
            mstore(add(dataAreaEnd, 0x60), mload(add(sourceOffset, 0x60)))      // senderAddress
            mstore(add(dataAreaEnd, 0x80), mload(add(sourceOffset, 0x80)))      // makerAssetAmount
            mstore(add(dataAreaEnd, 0xA0), mload(add(sourceOffset, 0xA0)))      // takerAssetAmount
            mstore(add(dataAreaEnd, 0xC0), mload(add(sourceOffset, 0xC0)))      // makerFeeAmount
            mstore(add(dataAreaEnd, 0xE0), mload(add(sourceOffset, 0xE0)))      // takerFeeAmount
            mstore(add(dataAreaEnd, 0x100), mload(add(sourceOffset, 0x100)))    // expirationTimeSeconds
            mstore(add(dataAreaEnd, 0x120), mload(add(sourceOffset, 0x120)))    // salt
            mstore(add(dataAreaEnd, 0x140), mload(add(sourceOffset, 0x140)))    // Offset to makerAssetData
            mstore(add(dataAreaEnd, 0x160), mload(add(sourceOffset, 0x160)))    // Offset to takerAssetData
            dataAreaEnd := add(dataAreaEnd, 0x180)
            sourceOffset := add(sourceOffset, 0x180)

            // Write offset to <order.makerAssetData>
            mstore(add(dataAreaStart, mul(10, 0x20)), sub(dataAreaEnd, dataAreaStart))

            // Calculate length of <order.makerAssetData>
            sourceOffset := mload(add(order, 0x140)) // makerAssetData
            arrayLenBytes := mload(sourceOffset)
            sourceOffset := add(sourceOffset, 0x20)
            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)

            // Write length of <order.makerAssetData>
            mstore(dataAreaEnd, arrayLenBytes)
            dataAreaEnd := add(dataAreaEnd, 0x20)

            // Write contents of <order.makerAssetData>
            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
                mstore(dataAreaEnd, mload(sourceOffset))
                dataAreaEnd := add(dataAreaEnd, 0x20)
                sourceOffset := add(sourceOffset, 0x20)
            }

            // Write offset to <order.takerAssetData>
            mstore(add(dataAreaStart, mul(11, 0x20)), sub(dataAreaEnd, dataAreaStart))

            // Calculate length of <order.takerAssetData>
            sourceOffset := mload(add(order, 0x160)) // takerAssetData
            arrayLenBytes := mload(sourceOffset)
            sourceOffset := add(sourceOffset, 0x20)
            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)

            // Write length of <order.takerAssetData>
            mstore(dataAreaEnd, arrayLenBytes)
            dataAreaEnd := add(dataAreaEnd, 0x20)

            // Write contents of  <order.takerAssetData>
            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
                mstore(dataAreaEnd, mload(sourceOffset))
                dataAreaEnd := add(dataAreaEnd, 0x20)
                sourceOffset := add(sourceOffset, 0x20)
            }

            /////// Write takerAssetFillAmount ///////
            mstore(paramsAreaOffset, takerAssetFillAmount)
            paramsAreaOffset := add(paramsAreaOffset, 0x20)

            /////// Write signature ///////
            // Write offset to paramsArea
            mstore(paramsAreaOffset, sub(dataAreaEnd, paramsAreaStart))

            // Calculate length of signature
            sourceOffset := signature
            arrayLenBytes := mload(sourceOffset)
            sourceOffset := add(sourceOffset, 0x20)
            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)

            // Write length of signature
            mstore(dataAreaEnd, arrayLenBytes)
            dataAreaEnd := add(dataAreaEnd, 0x20)

            // Write contents of signature
            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
                mstore(dataAreaEnd, mload(sourceOffset))
                dataAreaEnd := add(dataAreaEnd, 0x20)
                sourceOffset := add(sourceOffset, 0x20)
            }

            // Set length of calldata
            mstore(fillOrderCalldata, sub(dataAreaEnd, add(fillOrderCalldata, 0x20)))

            // Increment free memory pointer
            mstore(0x40, dataAreaEnd)
        }

        return fillOrderCalldata;
    }
}


/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;



/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;





contract IWrapperFunctions {

    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order LibOrder.Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev Fills an order with specified parameters and ECDSA signature.
    ///      Returns false if the transaction would otherwise revert.
    /// @param order LibOrder.Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderNoThrow(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev Synchronously executes multiple calls of fillOrder.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function batchFillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrKill.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function batchFillOrKillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Fills an order with specified parameters and ECDSA signature.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function batchFillOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrders(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of makerAsset is bought by taker.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrders(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple fill orders in a single transaction until total amount is bought by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously cancels multiple orders in a single transaction.
    /// @param orders Array of order specifications.
    function batchCancelOrders(LibOrder.Order[] memory orders)
        public;

    /// @dev Fetches information for all passed in orders
    /// @param orders Array of order specifications.
    /// @return Array of OrderInfo instances that correspond to each order.
    function getOrdersInfo(LibOrder.Order[] memory orders)
        public
        view
        returns (LibOrder.OrderInfo[] memory);
}



contract MWrapperFunctions is 
    IWrapperFunctions
{
    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order LibOrder.Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrderInternal(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (LibFillResults.FillResults memory fillResults);
}



contract MixinWrapperFunctions is
    ReentrancyGuard,
    LibMath,
    LibFillResults,
    LibAbiEncoder,
    MExchangeCore,
    MWrapperFunctions
{
    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        nonReentrant
        returns (FillResults memory fillResults)
    {
        fillResults = fillOrKillOrderInternal(
            order,
            takerAssetFillAmount,
            signature
        );
        return fillResults;
    }

    /// @dev Fills the input order.
    ///      Returns false if the transaction would otherwise revert.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderNoThrow(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (FillResults memory fillResults)
    {
        // ABI encode calldata for `fillOrder`
        bytes memory fillOrderCalldata = abiEncodeFillOrder(
            order,
            takerAssetFillAmount,
            signature
        );

        // Delegate to `fillOrder` and handle any exceptions gracefully
        assembly {
            let success := delegatecall(
                gas,                                // forward all gas
                address,                            // call address of this contract
                add(fillOrderCalldata, 32),         // pointer to start of input (skip array length in first 32 bytes)
                mload(fillOrderCalldata),           // length of input
                fillOrderCalldata,                  // write output over input
                128                                 // output size is 128 bytes
            )
            if success {
                mstore(fillResults, mload(fillOrderCalldata))
                mstore(add(fillResults, 32), mload(add(fillOrderCalldata, 32)))
                mstore(add(fillResults, 64), mload(add(fillOrderCalldata, 64)))
                mstore(add(fillResults, 96), mload(add(fillOrderCalldata, 96)))
            }
        }
        // fillResults values will be 0 by default if call was unsuccessful
        return fillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    ///         NOTE: makerAssetFilledAmount and takerAssetFilledAmount may include amounts filled of different assets.
    function batchFillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            FillResults memory singleFillResults = fillOrderInternal(
                orders[i],
                takerAssetFillAmounts[i],
                signatures[i]
            );
            addFillResults(totalFillResults, singleFillResults);
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrKill.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    ///         NOTE: makerAssetFilledAmount and takerAssetFilledAmount may include amounts filled of different assets.
    function batchFillOrKillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            FillResults memory singleFillResults = fillOrKillOrderInternal(
                orders[i],
                takerAssetFillAmounts[i],
                signatures[i]
            );
            addFillResults(totalFillResults, singleFillResults);
        }
        return totalFillResults;
    }

    /// @dev Fills an order with specified parameters and ECDSA signature.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    ///         NOTE: makerAssetFilledAmount and takerAssetFilledAmount may include amounts filled of different assets.
    function batchFillOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (FillResults memory totalFillResults)
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            FillResults memory singleFillResults = fillOrderNoThrow(
                orders[i],
                takerAssetFillAmounts[i],
                signatures[i]
            );
            addFillResults(totalFillResults, singleFillResults);
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrders(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        bytes memory takerAssetData = orders[0].takerAssetData;
    
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being sold by taker is the same for each order.
            // Rather than passing this in as calldata, we use the takerAssetData from the first order in all later orders.
            orders[i].takerAssetData = takerAssetData;

            // Calculate the remaining amount of takerAsset to sell
            uint256 remainingTakerAssetFillAmount = safeSub(takerAssetFillAmount, totalFillResults.takerAssetFilledAmount);

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderInternal(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of takerAsset has been sold
            if (totalFillResults.takerAssetFilledAmount >= takerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (FillResults memory totalFillResults)
    {
        bytes memory takerAssetData = orders[0].takerAssetData;

        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being sold by taker is the same for each order.
            // Rather than passing this in as calldata, we use the takerAssetData from the first order in all later orders.
            orders[i].takerAssetData = takerAssetData;

            // Calculate the remaining amount of takerAsset to sell
            uint256 remainingTakerAssetFillAmount = safeSub(takerAssetFillAmount, totalFillResults.takerAssetFilledAmount);

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderNoThrow(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of takerAsset has been sold
            if (totalFillResults.takerAssetFilledAmount >= takerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of makerAsset is bought by taker.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrders(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        bytes memory makerAssetData = orders[0].makerAssetData;

        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being bought by taker is the same for each order.
            // Rather than passing this in as calldata, we copy the makerAssetData from the first order onto all later orders.
            orders[i].makerAssetData = makerAssetData;

            // Calculate the remaining amount of makerAsset to buy
            uint256 remainingMakerAssetFillAmount = safeSub(makerAssetFillAmount, totalFillResults.makerAssetFilledAmount);

            // Convert the remaining amount of makerAsset to buy into remaining amount
            // of takerAsset to sell, assuming entire amount can be sold in the current order
            uint256 remainingTakerAssetFillAmount = getPartialAmountFloor(
                orders[i].takerAssetAmount,
                orders[i].makerAssetAmount,
                remainingMakerAssetFillAmount
            );

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderInternal(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of makerAsset has been bought
            if (totalFillResults.makerAssetFilledAmount >= makerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple fill orders in a single transaction until total amount is bought by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (FillResults memory totalFillResults)
    {
        bytes memory makerAssetData = orders[0].makerAssetData;

        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being bought by taker is the same for each order.
            // Rather than passing this in as calldata, we copy the makerAssetData from the first order onto all later orders.
            orders[i].makerAssetData = makerAssetData;

            // Calculate the remaining amount of makerAsset to buy
            uint256 remainingMakerAssetFillAmount = safeSub(makerAssetFillAmount, totalFillResults.makerAssetFilledAmount);

            // Convert the remaining amount of makerAsset to buy into remaining amount
            // of takerAsset to sell, assuming entire amount can be sold in the current order
            uint256 remainingTakerAssetFillAmount = getPartialAmountFloor(
                orders[i].takerAssetAmount,
                orders[i].makerAssetAmount,
                remainingMakerAssetFillAmount
            );

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderNoThrow(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of makerAsset has been bought
            if (totalFillResults.makerAssetFilledAmount >= makerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously cancels multiple orders in a single transaction.
    /// @param orders Array of order specifications.
    function batchCancelOrders(LibOrder.Order[] memory orders)
        public
        nonReentrant
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            cancelOrderInternal(orders[i]);
        }
    }

    /// @dev Fetches information for all passed in orders.
    /// @param orders Array of order specifications.
    /// @return Array of OrderInfo instances that correspond to each order.
    function getOrdersInfo(LibOrder.Order[] memory orders)
        public
        view
        returns (LibOrder.OrderInfo[] memory)
    {
        uint256 ordersLength = orders.length;
        LibOrder.OrderInfo[] memory ordersInfo = new LibOrder.OrderInfo[](ordersLength);
        for (uint256 i = 0; i != ordersLength; i++) {
            ordersInfo[i] = getOrderInfo(orders[i]);
        }
        return ordersInfo;
    }

    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrderInternal(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (FillResults memory fillResults)
    {
        fillResults = fillOrderInternal(
            order,
            takerAssetFillAmount,
            signature
        );
        require(
            fillResults.takerAssetFilledAmount == takerAssetFillAmount,
            "COMPLETE_FILL_FAILED"
        );
        return fillResults;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

pragma solidity 0.4.24;

pragma solidity 0.4.24;


contract IOwnable {

    function transferOwnership(address newOwner)
        public;
}



contract Ownable is
    IOwnable
{
    address public owner;

    constructor ()
        public
    {
        owner = msg.sender;
    }

    modifier onlyOwner() {
        require(
            msg.sender == owner,
            "ONLY_CONTRACT_OWNER"
        );
        _;
    }

    function transferOwnership(address newOwner)
        public
        onlyOwner
    {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }
}


/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;




contract IAuthorizable is
    IOwnable
{
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory);
}



contract IAssetProxy is
    IAuthorizable
{
    /// @dev Transfers assets. Either succeeds or throws.
    /// @param assetData Byte array encoded for the respective asset proxy.
    /// @param from Address to transfer asset from.
    /// @param to Address to transfer asset to.
    /// @param amount Amount of asset to transfer.
    function transferFrom(
        bytes assetData,
        address from,
        address to,
        uint256 amount
    )
        external;
    
    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4);
}



contract MixinAssetProxyDispatcher is
    Ownable,
    MAssetProxyDispatcher
{
    // Mapping from Asset Proxy Id's to their respective Asset Proxy
    mapping (bytes4 => IAssetProxy) public assetProxies;

    /// @dev Registers an asset proxy to its asset proxy id.
    ///      Once an asset proxy is registered, it cannot be unregistered.
    /// @param assetProxy Address of new asset proxy to register.
    function registerAssetProxy(address assetProxy)
        external
        onlyOwner
    {
        IAssetProxy assetProxyContract = IAssetProxy(assetProxy);

        // Ensure that no asset proxy exists with current id.
        bytes4 assetProxyId = assetProxyContract.getProxyId();
        address currentAssetProxy = assetProxies[assetProxyId];
        require(
            currentAssetProxy == address(0),
            "ASSET_PROXY_ALREADY_EXISTS"
        );

        // Add asset proxy and log registration.
        assetProxies[assetProxyId] = assetProxyContract;
        emit AssetProxyRegistered(
            assetProxyId,
            assetProxy
        );
    }

    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address)
    {
        return assetProxies[assetProxyId];
    }

    /// @dev Forwards arguments to assetProxy and calls `transferFrom`. Either succeeds or throws.
    /// @param assetData Byte array encoded for the asset.
    /// @param from Address to transfer token from.
    /// @param to Address to transfer token to.
    /// @param amount Amount of token to transfer.
    function dispatchTransferFrom(
        bytes memory assetData,
        address from,
        address to,
        uint256 amount
    )
        internal
    {
        // Do nothing if no amount should be transferred.
        if (amount > 0 && from != to) {
            // Ensure assetData length is valid
            require(
                assetData.length > 3,
                "LENGTH_GREATER_THAN_3_REQUIRED"
            );
            
            // Lookup assetProxy. We do not use `LibBytes.readBytes4` for gas efficiency reasons.
            bytes4 assetProxyId;
            assembly {
                assetProxyId := and(mload(
                    add(assetData, 32)),
                    0xFFFFFFFF00000000000000000000000000000000000000000000000000000000
                )
            }
            address assetProxy = assetProxies[assetProxyId];

            // Ensure that assetProxy exists
            require(
                assetProxy != address(0),
                "ASSET_PROXY_DOES_NOT_EXIST"
            );
            
            // We construct calldata for the `assetProxy.transferFrom` ABI.
            // The layout of this calldata is in the table below.
            // 
            // | Area     | Offset | Length  | Contents                                    |
            // | -------- |--------|---------|-------------------------------------------- |
            // | Header   | 0      | 4       | function selector                           |
            // | Params   |        | 4 * 32  | function parameters:                        |
            // |          | 4      |         |   1. offset to assetData (*)                |
            // |          | 36     |         |   2. from                                   |
            // |          | 68     |         |   3. to                                     |
            // |          | 100    |         |   4. amount                                 |
            // | Data     |        |         | assetData:                                  |
            // |          | 132    | 32      | assetData Length                            |
            // |          | 164    | **      | assetData Contents                          |

            assembly {
                /////// Setup State ///////
                // `cdStart` is the start of the calldata for `assetProxy.transferFrom` (equal to free memory ptr).
                let cdStart := mload(64)
                // `dataAreaLength` is the total number of words needed to store `assetData`
                //  As-per the ABI spec, this value is padded up to the nearest multiple of 32,
                //  and includes 32-bytes for length.
                let dataAreaLength := and(add(mload(assetData), 63), 0xFFFFFFFFFFFE0)
                // `cdEnd` is the end of the calldata for `assetProxy.transferFrom`.
                let cdEnd := add(cdStart, add(132, dataAreaLength))

                
                /////// Setup Header Area ///////
                // This area holds the 4-byte `transferFromSelector`.
                // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4
                mstore(cdStart, 0xa85e59e400000000000000000000000000000000000000000000000000000000)
                
                /////// Setup Params Area ///////
                // Each parameter is padded to 32-bytes. The entire Params Area is 128 bytes.
                // Notes:
                //   1. The offset to `assetData` is the length of the Params Area (128 bytes).
                //   2. A 20-byte mask is applied to addresses to zero-out the unused bytes.
                mstore(add(cdStart, 4), 128)
                mstore(add(cdStart, 36), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(cdStart, 68), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(cdStart, 100), amount)
                
                /////// Setup Data Area ///////
                // This area holds `assetData`.
                let dataArea := add(cdStart, 132)
                // solhint-disable-next-line no-empty-blocks
                for {} lt(dataArea, cdEnd) {} {
                    mstore(dataArea, mload(assetData))
                    dataArea := add(dataArea, 32)
                    assetData := add(assetData, 32)
                }

                /////// Call `assetProxy.transferFrom` using the constructed calldata ///////
                let success := call(
                    gas,                    // forward all gas
                    assetProxy,             // call address of asset proxy
                    0,                      // don't send any ETH
                    cdStart,                // pointer to start of input
                    sub(cdEnd, cdStart),    // length of input  
                    cdStart,                // write output over input
                    512                     // reserve 512 bytes for output
                )
                if iszero(success) {
                    revert(cdStart, returndatasize())
                }
            }
        }
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

// solhint-disable
pragma solidity 0.4.24;


/// @dev This contract documents the revert reasons used in the Exchange contract.
/// This contract is intended to serve as a reference, but is not actually used for efficiency reasons.
contract LibExchangeErrors {

    /// Order validation errors ///
    string constant ORDER_UNFILLABLE = "ORDER_UNFILLABLE";                              // Order cannot be filled.
    string constant INVALID_MAKER = "INVALID_MAKER";                                    // Invalid makerAddress.
    string constant INVALID_TAKER = "INVALID_TAKER";                                    // Invalid takerAddress.
    string constant INVALID_SENDER = "INVALID_SENDER";                                  // Invalid `msg.sender`.
    string constant INVALID_ORDER_SIGNATURE = "INVALID_ORDER_SIGNATURE";                // Signature validation failed. 
    
    /// fillOrder validation errors ///
    string constant INVALID_TAKER_AMOUNT = "INVALID_TAKER_AMOUNT";                      // takerAssetFillAmount cannot equal 0.
    string constant ROUNDING_ERROR = "ROUNDING_ERROR";                                  // Rounding error greater than 0.1% of takerAssetFillAmount. 
    
    /// Signature validation errors ///
    string constant INVALID_SIGNATURE = "INVALID_SIGNATURE";                            // Signature validation failed. 
    string constant SIGNATURE_ILLEGAL = "SIGNATURE_ILLEGAL";                            // Signature type is illegal.
    string constant SIGNATURE_UNSUPPORTED = "SIGNATURE_UNSUPPORTED";                    // Signature type unsupported.
    
    /// cancelOrdersUptTo errors ///
    string constant INVALID_NEW_ORDER_EPOCH = "INVALID_NEW_ORDER_EPOCH";                // Specified salt must be greater than or equal to existing orderEpoch.

    /// fillOrKillOrder errors ///
    string constant COMPLETE_FILL_FAILED = "COMPLETE_FILL_FAILED";                      // Desired takerAssetFillAmount could not be completely filled. 

    /// matchOrders errors ///
    string constant NEGATIVE_SPREAD_REQUIRED = "NEGATIVE_SPREAD_REQUIRED";              // Matched orders must have a negative spread.

    /// Transaction errors ///
    string constant REENTRANCY_ILLEGAL = "REENTRANCY_ILLEGAL";                          // Recursive reentrancy is not allowed. 
    string constant INVALID_TX_HASH = "INVALID_TX_HASH";                                // Transaction has already been executed. 
    string constant INVALID_TX_SIGNATURE = "INVALID_TX_SIGNATURE";                      // Signature validation failed. 
    string constant FAILED_EXECUTION = "FAILED_EXECUTION";                              // Transaction execution failed. 
    
    /// registerAssetProxy errors ///
    string constant ASSET_PROXY_ALREADY_EXISTS = "ASSET_PROXY_ALREADY_EXISTS";          // AssetProxy with same id already exists.

    /// dispatchTransferFrom errors ///
    string constant ASSET_PROXY_DOES_NOT_EXIST = "ASSET_PROXY_DOES_NOT_EXIST";          // No assetProxy registered at given id.
    string constant TRANSFER_FAILED = "TRANSFER_FAILED";                                // Asset transfer unsuccesful.

    /// Length validation errors ///
    string constant LENGTH_GREATER_THAN_0_REQUIRED = "LENGTH_GREATER_THAN_0_REQUIRED";  // Byte array must have a length greater than 0.
    string constant LENGTH_GREATER_THAN_3_REQUIRED = "LENGTH_GREATER_THAN_3_REQUIRED";  // Byte array must have a length greater than 3.
    string constant LENGTH_0_REQUIRED = "LENGTH_0_REQUIRED";                            // Byte array must have a length of 0.
    string constant LENGTH_65_REQUIRED = "LENGTH_65_REQUIRED";                          // Byte array must have a length of 65.
}






contract MixinTransactions is
    LibEIP712,
    MSignatureValidator,
    MTransactions
{
    // Mapping of transaction hash => executed
    // This prevents transactions from being executed more than once.
    mapping (bytes32 => bool) public transactions;

    // Address of current transaction signer
    address public currentContextAddress;

    /// @dev Executes an exchange method call in the context of signer.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @param signature Proof of signer transaction by signer.
    function executeTransaction(
        uint256 salt,
        address signerAddress,
        bytes data,
        bytes signature
    )
        external
    {
        // Prevent reentrancy
        require(
            currentContextAddress == address(0),
            "REENTRANCY_ILLEGAL"
        );

        bytes32 transactionHash = hashEIP712Message(hashZeroExTransaction(
            salt,
            signerAddress,
            data
        ));

        // Validate transaction has not been executed
        require(
            !transactions[transactionHash],
            "INVALID_TX_HASH"
        );

        // Transaction always valid if signer is sender of transaction
        if (signerAddress != msg.sender) {
            // Validate signature
            require(
                isValidSignature(
                    transactionHash,
                    signerAddress,
                    signature
                ),
                "INVALID_TX_SIGNATURE"
            );

            // Set the current transaction signer
            currentContextAddress = signerAddress;
        }

        // Execute transaction
        transactions[transactionHash] = true;
        require(
            address(this).delegatecall(data),
            "FAILED_EXECUTION"
        );

        // Reset current transaction signer if it was previously updated
        if (signerAddress != msg.sender) {
            currentContextAddress = address(0);
        }
    }

    /// @dev Calculates EIP712 hash of the Transaction.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @return EIP712 hash of the Transaction.
    function hashZeroExTransaction(
        uint256 salt,
        address signerAddress,
        bytes memory data
    )
        internal
        pure
        returns (bytes32 result)
    {
        bytes32 schemaHash = EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH;
        bytes32 dataHash = keccak256(data);

        // Assembly for more efficiently computing:
        // keccak256(abi.encodePacked(
        //     EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH,
        //     salt,
        //     bytes32(signerAddress),
        //     keccak256(data)
        // ));

        assembly {
            // Load free memory pointer
            let memPtr := mload(64)

            mstore(memPtr, schemaHash)                                                               // hash of schema
            mstore(add(memPtr, 32), salt)                                                            // salt
            mstore(add(memPtr, 64), and(signerAddress, 0xffffffffffffffffffffffffffffffffffffffff))  // signerAddress
            mstore(add(memPtr, 96), dataHash)                                                        // hash of data

            // Compute hash
            result := keccak256(memPtr, 128)
        }
        return result;
    }

    /// @dev The current function will be called in the context of this address (either 0x transaction signer or `msg.sender`).
    ///      If calling a fill function, this address will represent the taker.
    ///      If calling a cancel function, this address will represent the maker.
    /// @return Signer of 0x transaction if entry point is `executeTransaction`.
    ///         `msg.sender` if entry point is any other function.
    function getCurrentContextAddress()
        internal
        view
        returns (address)
    {
        address currentContextAddress_ = currentContextAddress;
        address contextAddress = currentContextAddress_ == address(0) ? msg.sender : currentContextAddress_;
        return contextAddress;
    }
}

/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/

pragma solidity 0.4.24;







/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;



/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;





contract IMatchOrders {

    /// @dev Match two complementary orders that have a profitable spread.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the left order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftSignature Proof that order was created by the left maker.
    /// @param rightSignature Proof that order was created by the right maker.
    /// @return matchedFillResults Amounts filled and fees paid by maker and taker of matched orders.
    function matchOrders(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        bytes memory leftSignature,
        bytes memory rightSignature
    )
        public
        returns (LibFillResults.MatchedFillResults memory matchedFillResults);
}



contract MMatchOrders is
    IMatchOrders
{
    /// @dev Validates context for matchOrders. Succeeds or throws.
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    function assertValidMatch(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder
    )
        internal
        pure;

    /// @dev Calculates fill amounts for the matched orders.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the leftOrder order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftOrderTakerAssetFilledAmount Amount of left order already filled.
    /// @param rightOrderTakerAssetFilledAmount Amount of right order already filled.
    /// @param matchedFillResults Amounts to fill and fees to pay by maker and taker of matched orders.
    function calculateMatchedFillResults(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        uint256 leftOrderTakerAssetFilledAmount,
        uint256 rightOrderTakerAssetFilledAmount
    )
        internal
        pure
        returns (LibFillResults.MatchedFillResults memory matchedFillResults);

}





contract MixinMatchOrders is
    ReentrancyGuard,
    LibConstants,
    LibMath,
    MAssetProxyDispatcher,
    MExchangeCore,
    MMatchOrders,
    MTransactions
{
    /// @dev Match two complementary orders that have a profitable spread.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the left order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftSignature Proof that order was created by the left maker.
    /// @param rightSignature Proof that order was created by the right maker.
    /// @return matchedFillResults Amounts filled and fees paid by maker and taker of matched orders.
    function matchOrders(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        bytes memory leftSignature,
        bytes memory rightSignature
    )
        public
        nonReentrant
        returns (LibFillResults.MatchedFillResults memory matchedFillResults)
    {
        // We assume that rightOrder.takerAssetData == leftOrder.makerAssetData and rightOrder.makerAssetData == leftOrder.takerAssetData.
        // If this assumption isn't true, the match will fail at signature validation.
        rightOrder.makerAssetData = leftOrder.takerAssetData;
        rightOrder.takerAssetData = leftOrder.makerAssetData;

        // Get left & right order info
        LibOrder.OrderInfo memory leftOrderInfo = getOrderInfo(leftOrder);
        LibOrder.OrderInfo memory rightOrderInfo = getOrderInfo(rightOrder);

        // Fetch taker address
        address takerAddress = getCurrentContextAddress();
        
        // Either our context is valid or we revert
        assertFillableOrder(
            leftOrder,
            leftOrderInfo,
            takerAddress,
            leftSignature
        );
        assertFillableOrder(
            rightOrder,
            rightOrderInfo,
            takerAddress,
            rightSignature
        );
        assertValidMatch(leftOrder, rightOrder);

        // Compute proportional fill amounts
        matchedFillResults = calculateMatchedFillResults(
            leftOrder,
            rightOrder,
            leftOrderInfo.orderTakerAssetFilledAmount,
            rightOrderInfo.orderTakerAssetFilledAmount
        );

        // Validate fill contexts
        assertValidFill(
            leftOrder,
            leftOrderInfo,
            matchedFillResults.left.takerAssetFilledAmount,
            matchedFillResults.left.takerAssetFilledAmount,
            matchedFillResults.left.makerAssetFilledAmount
        );
        assertValidFill(
            rightOrder,
            rightOrderInfo,
            matchedFillResults.right.takerAssetFilledAmount,
            matchedFillResults.right.takerAssetFilledAmount,
            matchedFillResults.right.makerAssetFilledAmount
        );
        
        // Update exchange state
        updateFilledState(
            leftOrder,
            takerAddress,
            leftOrderInfo.orderHash,
            leftOrderInfo.orderTakerAssetFilledAmount,
            matchedFillResults.left
        );
        updateFilledState(
            rightOrder,
            takerAddress,
            rightOrderInfo.orderHash,
            rightOrderInfo.orderTakerAssetFilledAmount,
            matchedFillResults.right
        );

        // Settle matched orders. Succeeds or throws.
        settleMatchedOrders(
            leftOrder,
            rightOrder,
            takerAddress,
            matchedFillResults
        );

        return matchedFillResults;
    }

    /// @dev Validates context for matchOrders. Succeeds or throws.
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    function assertValidMatch(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder
    )
        internal
        pure
    {
        // Make sure there is a profitable spread.
        // There is a profitable spread iff the cost per unit bought (OrderA.MakerAmount/OrderA.TakerAmount) for each order is greater
        // than the profit per unit sold of the matched order (OrderB.TakerAmount/OrderB.MakerAmount).
        // This is satisfied by the equations below:
        // <leftOrder.makerAssetAmount> / <leftOrder.takerAssetAmount> >= <rightOrder.takerAssetAmount> / <rightOrder.makerAssetAmount>
        // AND
        // <rightOrder.makerAssetAmount> / <rightOrder.takerAssetAmount> >= <leftOrder.takerAssetAmount> / <leftOrder.makerAssetAmount>
        // These equations can be combined to get the following:
        require(
            safeMul(leftOrder.makerAssetAmount, rightOrder.makerAssetAmount) >=
            safeMul(leftOrder.takerAssetAmount, rightOrder.takerAssetAmount),
            "NEGATIVE_SPREAD_REQUIRED"
        );
    }

    /// @dev Calculates fill amounts for the matched orders.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the leftOrder order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftOrderTakerAssetFilledAmount Amount of left order already filled.
    /// @param rightOrderTakerAssetFilledAmount Amount of right order already filled.
    /// @param matchedFillResults Amounts to fill and fees to pay by maker and taker of matched orders.
    function calculateMatchedFillResults(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        uint256 leftOrderTakerAssetFilledAmount,
        uint256 rightOrderTakerAssetFilledAmount
    )
        internal
        pure
        returns (LibFillResults.MatchedFillResults memory matchedFillResults)
    {
        // Derive maker asset amounts for left & right orders, given store taker assert amounts
        uint256 leftTakerAssetAmountRemaining = safeSub(leftOrder.takerAssetAmount, leftOrderTakerAssetFilledAmount);
        uint256 leftMakerAssetAmountRemaining = safeGetPartialAmountFloor(
            leftOrder.makerAssetAmount,
            leftOrder.takerAssetAmount,
            leftTakerAssetAmountRemaining
        );
        uint256 rightTakerAssetAmountRemaining = safeSub(rightOrder.takerAssetAmount, rightOrderTakerAssetFilledAmount);
        uint256 rightMakerAssetAmountRemaining = safeGetPartialAmountFloor(
            rightOrder.makerAssetAmount,
            rightOrder.takerAssetAmount,
            rightTakerAssetAmountRemaining
        );

        // Calculate fill results for maker and taker assets: at least one order will be fully filled.
        // The maximum amount the left maker can buy is `leftTakerAssetAmountRemaining`
        // The maximum amount the right maker can sell is `rightMakerAssetAmountRemaining`
        // We have two distinct cases for calculating the fill results:
        // Case 1.
        //   If the left maker can buy more than the right maker can sell, then only the right order is fully filled.
        //   If the left maker can buy exactly what the right maker can sell, then both orders are fully filled.
        // Case 2.
        //   If the left maker cannot buy more than the right maker can sell, then only the left order is fully filled.
        if (leftTakerAssetAmountRemaining >= rightMakerAssetAmountRemaining) {
            // Case 1: Right order is fully filled
            matchedFillResults.right.makerAssetFilledAmount = rightMakerAssetAmountRemaining;
            matchedFillResults.right.takerAssetFilledAmount = rightTakerAssetAmountRemaining;
            matchedFillResults.left.takerAssetFilledAmount = matchedFillResults.right.makerAssetFilledAmount;
            // Round down to ensure the maker's exchange rate does not exceed the price specified by the order. 
            // We favor the maker when the exchange rate must be rounded.
            matchedFillResults.left.makerAssetFilledAmount = safeGetPartialAmountFloor(
                leftOrder.makerAssetAmount,
                leftOrder.takerAssetAmount,
                matchedFillResults.left.takerAssetFilledAmount
            );
        } else {
            // Case 2: Left order is fully filled
            matchedFillResults.left.makerAssetFilledAmount = leftMakerAssetAmountRemaining;
            matchedFillResults.left.takerAssetFilledAmount = leftTakerAssetAmountRemaining;
            matchedFillResults.right.makerAssetFilledAmount = matchedFillResults.left.takerAssetFilledAmount;
            // Round up to ensure the maker's exchange rate does not exceed the price specified by the order.
            // We favor the maker when the exchange rate must be rounded.
            matchedFillResults.right.takerAssetFilledAmount = safeGetPartialAmountCeil(
                rightOrder.takerAssetAmount,
                rightOrder.makerAssetAmount,
                matchedFillResults.right.makerAssetFilledAmount
            );
        }

        // Calculate amount given to taker
        matchedFillResults.leftMakerAssetSpreadAmount = safeSub(
            matchedFillResults.left.makerAssetFilledAmount,
            matchedFillResults.right.takerAssetFilledAmount
        );

        // Compute fees for left order
        matchedFillResults.left.makerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.left.makerAssetFilledAmount,
            leftOrder.makerAssetAmount,
            leftOrder.makerFee
        );
        matchedFillResults.left.takerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.left.takerAssetFilledAmount,
            leftOrder.takerAssetAmount,
            leftOrder.takerFee
        );

        // Compute fees for right order
        matchedFillResults.right.makerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.right.makerAssetFilledAmount,
            rightOrder.makerAssetAmount,
            rightOrder.makerFee
        );
        matchedFillResults.right.takerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.right.takerAssetFilledAmount,
            rightOrder.takerAssetAmount,
            rightOrder.takerFee
        );

        // Return fill results
        return matchedFillResults;
    }

    /// @dev Settles matched order by transferring appropriate funds between order makers, taker, and fee recipient.
    /// @param leftOrder First matched order.
    /// @param rightOrder Second matched order.
    /// @param takerAddress Address that matched the orders. The taker receives the spread between orders as profit.
    /// @param matchedFillResults Struct holding amounts to transfer between makers, taker, and fee recipients.
    function settleMatchedOrders(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        address takerAddress,
        LibFillResults.MatchedFillResults memory matchedFillResults
    )
        private
    {
        bytes memory zrxAssetData = ZRX_ASSET_DATA;
        // Order makers and taker
        dispatchTransferFrom(
            leftOrder.makerAssetData,
            leftOrder.makerAddress,
            rightOrder.makerAddress,
            matchedFillResults.right.takerAssetFilledAmount
        );
        dispatchTransferFrom(
            rightOrder.makerAssetData,
            rightOrder.makerAddress,
            leftOrder.makerAddress,
            matchedFillResults.left.takerAssetFilledAmount
        );
        dispatchTransferFrom(
            leftOrder.makerAssetData,
            leftOrder.makerAddress,
            takerAddress,
            matchedFillResults.leftMakerAssetSpreadAmount
        );

        // Maker fees
        dispatchTransferFrom(
            zrxAssetData,
            leftOrder.makerAddress,
            leftOrder.feeRecipientAddress,
            matchedFillResults.left.makerFeePaid
        );
        dispatchTransferFrom(
            zrxAssetData,
            rightOrder.makerAddress,
            rightOrder.feeRecipientAddress,
            matchedFillResults.right.makerFeePaid
        );

        // Taker fees
        if (leftOrder.feeRecipientAddress == rightOrder.feeRecipientAddress) {
            dispatchTransferFrom(
                zrxAssetData,
                takerAddress,
                leftOrder.feeRecipientAddress,
                safeAdd(
                    matchedFillResults.left.takerFeePaid,
                    matchedFillResults.right.takerFeePaid
                )
            );
        } else {
            dispatchTransferFrom(
                zrxAssetData,
                takerAddress,
                leftOrder.feeRecipientAddress,
                matchedFillResults.left.takerFeePaid
            );
            dispatchTransferFrom(
                zrxAssetData,
                takerAddress,
                rightOrder.feeRecipientAddress,
                matchedFillResults.right.takerFeePaid
            );
        }
    }
}



// solhint-disable no-empty-blocks
contract Exchange is
    MixinExchangeCore,
    MixinMatchOrders,
    MixinSignatureValidator,
    MixinTransactions,
    MixinAssetProxyDispatcher,
    MixinWrapperFunctions
{
    string constant public VERSION = "2.0.1-alpha";

    // Mixins are instantiated in the order they are inherited
    constructor (bytes memory _zrxAssetData)
        public
        LibConstants(_zrxAssetData) // @TODO: Remove when we deploy.
        MixinExchangeCore()
        MixinMatchOrders()
        MixinSignatureValidator()
        MixinTransactions()
        MixinAssetProxyDispatcher()
        MixinWrapperFunctions()
    {}
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

contract IOwnable {

    function transferOwnership(address newOwner)
        public;
}

contract Ownable is
    IOwnable
{
    address public owner;

    constructor ()
        public
    {
        owner = msg.sender;
    }

    modifier onlyOwner() {
        require(
            msg.sender == owner,
            "ONLY_CONTRACT_OWNER"
        );
        _;
    }

    function transferOwnership(address newOwner)
        public
        onlyOwner
    {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }
}

contract IAuthorizable is
    IOwnable
{
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory);
}

contract MAuthorizable is
    IAuthorizable
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );

    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );

    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized { revert(); _; }
}

contract MixinAuthorizable is
    Ownable,
    MAuthorizable
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        require(
            authorized[msg.sender],
            "SENDER_NOT_AUTHORIZED"
        );
        _;
    }

    mapping (address => bool) public authorized;
    address[] public authorities;

    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            !authorized[target],
            "TARGET_ALREADY_AUTHORIZED"
        );

        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );

        delete authorized[target];
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                authorities[i] = authorities[authorities.length - 1];
                authorities.length -= 1;
                break;
            }
        }
        emit AuthorizedAddressRemoved(target, msg.sender);
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );
        require(
            index < authorities.length,
            "INDEX_OUT_OF_BOUNDS"
        );
        require(
            authorities[index] == target,
            "AUTHORIZED_ADDRESS_MISMATCH"
        );

        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.length -= 1;
        emit AuthorizedAddressRemoved(target, msg.sender);
    }

    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory)
    {
        return authorities;
    }
}

contract ERC20Proxy is
    MixinAuthorizable
{
    // Id of this proxy.
    bytes4 constant internal PROXY_ID = bytes4(keccak256("ERC20Token(address)"));
    
    // solhint-disable-next-line payable-fallback
    function () 
        external
    {
        assembly {
            // The first 4 bytes of calldata holds the function selector
            let selector := and(calldataload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000)

            // `transferFrom` will be called with the following parameters:
            // assetData Encoded byte array.
            // from Address to transfer asset from.
            // to Address to transfer asset to.
            // amount Amount of asset to transfer.
            // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4
            if eq(selector, 0xa85e59e400000000000000000000000000000000000000000000000000000000) {

                // To lookup a value in a mapping, we load from the storage location keccak256(k, p),
                // where k is the key left padded to 32 bytes and p is the storage slot
                let start := mload(64)
                mstore(start, and(caller, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(start, 32), authorized_slot)

                // Revert if authorized[msg.sender] == false
                if iszero(sload(keccak256(start, 64))) {
                    // Revert with `Error("SENDER_NOT_AUTHORIZED")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x0000001553454e4445525f4e4f545f415554484f52495a454400000000000000)
                    mstore(96, 0)
                    revert(0, 100)
                }

                // `transferFrom`.
                // The function is marked `external`, so no abi decodeding is done for
                // us. Instead, we expect the `calldata` memory to contain the
                // following:
                //
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 4 * 32  | function parameters:                |
                // |          | 4      |         |   1. offset to assetData (*)        |
                // |          | 36     |         |   2. from                           |
                // |          | 68     |         |   3. to                             |
                // |          | 100    |         |   4. amount                         |
                // | Data     |        |         | assetData:                          |
                // |          | 132    | 32      | assetData Length                    |
                // |          | 164    | **      | assetData Contents                  |
                //
                // (*): offset is computed from start of function parameters, so offset
                //      by an additional 4 bytes in the calldata.
                //
                // (**): see table below to compute length of assetData Contents
                //
                // WARNING: The ABIv2 specification allows additional padding between
                //          the Params and Data section. This will result in a larger
                //          offset to assetData.

                // Asset data itself is encoded as follows:
                //
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 1 * 32  | function parameters:                |
                // |          | 4      | 12 + 20 |   1. token address                  |

                // We construct calldata for the `token.transferFrom` ABI.
                // The layout of this calldata is in the table below.
                //
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 3 * 32  | function parameters:                |
                // |          | 4      |         |   1. from                           |
                // |          | 36     |         |   2. to                             |
                // |          | 68     |         |   3. amount                         |

                /////// Read token address from calldata ///////
                // * The token address is stored in `assetData`.
                //
                // * The "offset to assetData" is stored at offset 4 in the calldata (table 1).
                //   [assetDataOffsetFromParams = calldataload(4)]
                //
                // * Notes that the "offset to assetData" is relative to the "Params" area of calldata;
                //   add 4 bytes to account for the length of the "Header" area (table 1).
                //   [assetDataOffsetFromHeader = assetDataOffsetFromParams + 4]
                //
                // * The "token address" is offset 32+4=36 bytes into "assetData" (tables 1 & 2).
                //   [tokenOffset = assetDataOffsetFromHeader + 36 = calldataload(4) + 4 + 36]
                let token := calldataload(add(calldataload(4), 40))
                
                /////// Setup Header Area ///////
                // This area holds the 4-byte `transferFrom` selector.
                // Any trailing data in transferFromSelector will be
                // overwritten in the next `mstore` call.
                mstore(0, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
                
                /////// Setup Params Area ///////
                // We copy the fields `from`, `to` and `amount` in bulk
                // from our own calldata to the new calldata.
                calldatacopy(4, 36, 96)

                /////// Call `token.transferFrom` using the calldata ///////
                let success := call(
                    gas,            // forward all gas
                    token,          // call address of token contract
                    0,              // don't send any ETH
                    0,              // pointer to start of input
                    100,            // length of input
                    0,              // write output over input
                    32              // output size should be 32 bytes
                )

                /////// Check return data. ///////
                // If there is no return data, we assume the token incorrectly
                // does not return a bool. In this case we expect it to revert
                // on failure, which was handled above.
                // If the token does return data, we require that it is a single
                // nonzero 32 bytes value.
                // So the transfer succeeded if the call succeeded and either
                // returned nothing, or returned a non-zero 32 byte value. 
                success := and(success, or(
                    iszero(returndatasize),
                    and(
                        eq(returndatasize, 32),
                        gt(mload(0), 0)
                    )
                ))
                if success {
                    return(0, 0)
                }
                
                // Revert with `Error("TRANSFER_FAILED")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            // Revert if undefined function is called
            revert(0, 0)
        }
    }

    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4)
    {
        return PROXY_ID;
    }
}

// File: @openzeppelin/contracts/math/SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: contracts/v1/AbstractFiatTokenV1.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;

    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}

// File: contracts/v1/Ownable.sol

/**
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;

/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;

    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);

    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }

    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }

    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}

// File: contracts/v1/Pausable.sol

/**
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ0
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);

    address public pauser;
    bool public paused = false;

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }

    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }

    /**
     * @dev update the pauser role
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}

// File: contracts/v1/Blacklistable.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal blacklisted;

    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);

    /**
     * @dev Throws if called by any account other than the blacklister
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }

    /**
     * @dev Throws if argument account is blacklisted
     * @param _account The address to check
     */
    modifier notBlacklisted(address _account) {
        require(
            !blacklisted[_account],
            "Blacklistable: account is blacklisted"
        );
        _;
    }

    /**
     * @dev Checks if account is blacklisted
     * @param _account The address to check
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return blacklisted[_account];
    }

    /**
     * @dev Adds account to blacklist
     * @param _account The address to blacklist
     */
    function blacklist(address _account) external onlyBlacklister {
        blacklisted[_account] = true;
        emit Blacklisted(_account);
    }

    /**
     * @dev Removes account from blacklist
     * @param _account The address to remove from the blacklist
     */
    function unBlacklist(address _account) external onlyBlacklister {
        blacklisted[_account] = false;
        emit UnBlacklisted(_account);
    }

    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
}

// File: contracts/v1/FiatTokenV1.sol

/**
 *
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;

    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;

    mapping(address => uint256) internal balances;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;

    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);

    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );

        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }

    /**
     * @dev Throws if called by any account other than a minter
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }

    /**
     * @dev Function to mint tokens
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");

        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );

        totalSupply_ = totalSupply_.add(_amount);
        balances[_to] = balances[_to].add(_amount);
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }

    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }

    /**
     * @dev Get minter allowance for an account
     * @param minter The address of the minter
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }

    /**
     * @dev Checks if account is a minter
     * @param account The address to check
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }

    /**
     * @notice Amount of remaining tokens spender is allowed to transfer on
     * behalf of the token owner
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @return Allowance amount
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }

    /**
     * @dev Get totalSupply of token
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }

    /**
     * @dev Get token balance of an account
     * @param account address The account
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return balances[account];
    }

    /**
     * @notice Set spender's allowance over the caller's tokens to be a given
     * value.
     * @param spender   Spender's address
     * @param value     Allowance amount
     * @return True if successful
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Internal function to set allowance
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param value     Allowance amount
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    /**
     * @notice Transfer tokens by spending allowance
     * @param from  Payer's address
     * @param to    Payee's address
     * @param value Transfer amount
     * @return True if successful
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }

    /**
     * @notice Transfer tokens from the caller
     * @param to    Payee's address
     * @param value Transfer amount
     * @return True if successful
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @notice Internal function to process transfers
     * @param from  Payer's address
     * @param to    Payee's address
     * @param value Transfer amount
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= balances[from],
            "ERC20: transfer amount exceeds balance"
        );

        balances[from] = balances[from].sub(value);
        balances[to] = balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Function to add/update a new minter
     * @param minter The address of the minter
     * @param minterAllowedAmount The minting amount allowed for the minter
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }

    /**
     * @dev Function to remove a minter
     * @param minter The address of the minter to remove
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }

    /**
     * @dev allows a minter to burn some of its own tokens
     * Validates that caller is a minter and that sender is not blacklisted
     * amount is less than or equal to the minter's account balance
     * @param _amount uint256 the amount of tokens to be burned
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = balances[msg.sender];
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");

        totalSupply_ = totalSupply_.sub(_amount);
        balances[msg.sender] = balance.sub(_amount);
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }

    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;

            bytes32 accountHash
         = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            codehash := extcodehash(account)
        }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(
        address target,
        bytes memory data,
        uint256 weiValue,
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{
            value: weiValue
        }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol

pragma solidity ^0.6.0;

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(
            value
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeERC20: decreased allowance below zero"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// File: contracts/v1.1/Rescuable.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

contract Rescuable is Ownable {
    using SafeERC20 for IERC20;

    address private _rescuer;

    event RescuerChanged(address indexed newRescuer);

    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }

    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }

    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }

    /**
     * @notice Assign the rescuer role to a given address.
     * @param newRescuer New rescuer's address
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}

// File: contracts/v1.1/FiatTokenV1_1.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {

}

// File: contracts/v2/AbstractFiatTokenV2.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;

    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}

// File: contracts/util/ECRecover.sol

/**
 * Copyright (c) 2016-2019 zOS Global Limited
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }

        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");

        return signer;
    }
}

// File: contracts/util/EIP712.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }

    /**
     * @notice Recover signer's address from a EIP712 signature
     * @param domainSeparator   Domain separator
     * @param v                 v of the signature
     * @param r                 r of the signature
     * @param s                 s of the signature
     * @param typeHashAndData   Type hash concatenated with data
     * @return Signer's address
     */
    function recover(
        bytes32 domainSeparator,
        uint8 v,
        bytes32 r,
        bytes32 s,
        bytes memory typeHashAndData
    ) internal pure returns (address) {
        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                domainSeparator,
                keccak256(typeHashAndData)
            )
        );
        return ECRecover.recover(digest, v, r, s);
    }
}

// File: contracts/v2/EIP712Domain.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    /**
     * @dev EIP712 Domain Separator
     */
    bytes32 public DOMAIN_SEPARATOR;
}

// File: contracts/v2/EIP3009.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;

    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;

    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;

    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;

    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );

    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }

    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);

        bytes memory data = abi.encode(
            TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == from,
            "FiatTokenV2: invalid signature"
        );

        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }

    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);

        bytes memory data = abi.encode(
            RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == from,
            "FiatTokenV2: invalid signature"
        );

        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }

    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);

        bytes memory data = abi.encode(
            CANCEL_AUTHORIZATION_TYPEHASH,
            authorizer,
            nonce
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == authorizer,
            "FiatTokenV2: invalid signature"
        );

        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }

    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }

    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }

    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}

// File: contracts/v2/EIP2612.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;

    mapping(address => uint256) private _permitNonces;

    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }

    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which this expires (unix time)
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        require(deadline >= now, "FiatTokenV2: permit is expired");

        bytes memory data = abi.encode(
            PERMIT_TYPEHASH,
            owner,
            spender,
            value,
            _permitNonces[owner]++,
            deadline
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == owner,
            "EIP2612: invalid signature"
        );

        _approve(owner, spender, value);
    }
}

// File: contracts/v2/FiatTokenV2.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;

    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(newName, "2");
        _initializedVersion = 1;
    }

    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }

    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }

    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }

    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }

    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }

    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    Expiration time, seconds since the epoch
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(owner) notBlacklisted(spender) {
        _permit(owner, spender, value, deadline, v, r, s);
    }

    /**
     * @notice Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }

    /**
     * @notice Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}

// File: contracts/v2/FiatTokenV2_1.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

// solhint-disable func-name-mixedcase

/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);

        uint256 lockedAmount = balances[address(this)];
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        blacklisted[address(this)] = true;

        _initializedVersion = 2;
    }

    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external view returns (string memory) {
        return "2";
    }
}