pragma solidity =0.6.6;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "./libraries/TransferHelper.sol";
import "./interfaces/IPancakeRouter02.sol";
import "./interfaces/IWETH.sol";
contract FeeReceiver is Pausable, Ownable {
    using SafeMath for uint256;
    event BuybackRateUpdated(uint256 newBuybackRate);
    event RevenueReceiverUpdated(address newRevenueReceiver);
    event RouterWhitelistUpdated(address router, bool status);
    event BuybackExecuted(uint256 amountBuyback, uint256 amountRevenue);
    address internal constant ZERO_ADDRESS = address(0);
    uint256 public constant FEE_DENOMINATOR = 10000;
    IPancakeRouter02 public pancakeRouter;
    address payable public revenueReceiver;
    uint256 public buybackRate;
    address public SYA;
    address public WETH;
    mapping(address => bool) public routerWhitelist;
    constructor(
        IPancakeRouter02 _pancakeRouterV2,
        address _SYA,
        address _WETH,
        address payable _revenueReceiver,
        uint256 _buybackRate
    ) public {
        pancakeRouter = _pancakeRouterV2;
        SYA = _SYA;
        WETH = _WETH;
        revenueReceiver = _revenueReceiver;
        buybackRate = _buybackRate;
        routerWhitelist[address(pancakeRouter)] = true;
    }
    /// @dev executes the buyback, buys SYA on pancake & sends revenue to the revenueReceiver by the defined rate.
    function executeBuyback() external whenNotPaused {
        require(address(this).balance > 0, "FeeReceiver: No balance for buyback");
        address[] memory path = new address[](2);
        path[0] = WETH;
        path[1] = SYA;
        uint256 balance = address(this).balance;
        uint256 amountBuyback = balance.mul(buybackRate).div(FEE_DENOMINATOR);
        uint256 amountRevenue = balance.sub(amountBuyback);
        pancakeRouter.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amountBuyback}(
            0,
            path,
            ZERO_ADDRESS,
            block.timestamp
        );
        TransferHelper.safeTransferETH(revenueReceiver, amountRevenue);
        emit BuybackExecuted(amountBuyback, amountRevenue);
    }
    /// @dev converts collected tokens from fees to ETH for executing buybacks
    function convertToETH(
        address _router,
        IERC20 _token,
        bool _fee
    ) public whenNotPaused {
        require(routerWhitelist[_router], "FeeReceiver: Router not whitelisted");
        address[] memory path = new address[](2);
        path[0] = address(_token);
        path[1] = WETH;
        uint256 balance = _token.balanceOf(address(this));
        TransferHelper.safeApprove(address(_token), address(pancakeRouter), balance);
        if (_fee) {
            IPancakeRouter02(_router).swapExactTokensForETHSupportingFeeOnTransferTokens(
                balance,
                0,
                path,
                address(this),
                block.timestamp
            );
        } else {
            IPancakeRouter02(_router).swapExactTokensForETH(balance, 0, path, address(this), block.timestamp);
        }
    }
    /// @dev converts WETH to ETH
    function unwrapWETH() public whenNotPaused {
        uint256 balance = IWETH(WETH).balanceOf(address(this));
        require(balance > 0, "FeeReceiver: Nothing to unwrap");
        IWETH(WETH).withdraw(balance);
    }
    /// @dev lets the owner update update the router whitelist
    function updateRouterWhiteliste(address _router, bool _status) external onlyOwner {
        routerWhitelist[_router] = _status;
        emit RouterWhitelistUpdated(_router, _status);
    }
    /// @dev lets the owner update the buyback rate
    function updateBuybackRate(uint256 _newBuybackRate) external onlyOwner {
        buybackRate = _newBuybackRate;
        emit BuybackRateUpdated(_newBuybackRate);
    }
    /// @dev lets the owner update the revenue receiver address
    function updateRevenueReceiver(address payable _newRevenueReceiver) external onlyOwner {
        revenueReceiver = _newRevenueReceiver;
        emit RevenueReceiverUpdated(_newRevenueReceiver);
    }
    /// @dev lets the owner withdraw ETH from the contract
    function withdrawETH(address payable to, uint256 amount) external onlyOwner {
        to.transfer(amount);
    }
    /// @dev lets the owner withdraw any ERC20 Token from the contract
    function withdrawERC20Token(
        address token,
        address to,
        uint256 amount
    ) external onlyOwner {
        IERC20(token).transfer(to, amount);
    }
    /// @dev allows to receive ETH on this contract
    receive() external payable {}
    /// @dev lets the owner pause the contract
    function pause() external onlyOwner {
        _pause();
    }
    /// @dev lets the owner unpause the contract
    function unpause() external onlyOwner {
        _unpause();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./Context.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
pragma solidity =0.6.6;
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "TransferHelper: APPROVE_FAILED");
    }
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "TransferHelper: TRANSFER_FAILED");
    }
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "TransferHelper: TRANSFER_FROM_FAILED");
    }
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, "TransferHelper: ETH_TRANSFER_FAILED");
    }
}
pragma solidity >=0.6.2;
import "./IPancakeRouter01.sol";
interface IPancakeRouter02 is IPancakeRouter01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountETH);
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}
pragma solidity >=0.5.0;
interface IWETH {
    function deposit() external payable;
    function transfer(address to, uint256 value) external returns (bool);
    function withdraw(uint256) external;
    function approve(address _spender, uint256 _amount) external returns (bool);
    function balanceOf(address _account) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
pragma solidity >=0.6.2;
interface IPancakeRouter01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );
    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);
    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);
    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);
    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapETHForExactTokens(
        uint256 amountOut,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);
    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) external pure returns (uint256 amountB);
    function getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountOut);
    function getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountIn);
    function getAmountsOut(uint256 amountIn, address[] calldata path) external view returns (uint256[] memory amounts);
    function getAmountsIn(uint256 amountOut, address[] calldata path) external view returns (uint256[] memory amounts);
}
pragma solidity =0.6.6;
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "./libraries/TransferHelper.sol";
import "./libraries/PancakeLibrary.sol";
import "./interfaces/IReferralRegistry.sol";
import "./interfaces/IWETH.sol";
import "./interfaces/IZerox.sol";
contract FloozRouter is Ownable, Pausable, ReentrancyGuard {
    using SafeMath for uint256;
    using LibBytesV06 for bytes;
    event SwapFeeUpdated(uint16 swapFee);
    event ReferralRegistryUpdated(address referralRegistry);
    event ReferralRewardRateUpdated(uint16 referralRewardRate);
    event ReferralsActivatedUpdated(bool activated);
    event FeeReceiverUpdated(address payable feeReceiver);
    event BalanceThresholdUpdated(uint256 balanceThreshold);
    event CustomReferralRewardRateUpdated(address indexed account, uint16 referralRate);
    event ReferralRewardPaid(address from, address indexed to, address tokenOut, address tokenReward, uint256 amount);
    event ForkUpdated(address factory);
    // Denominator of fee
    uint256 public constant FEE_DENOMINATOR = 10000;
    // Numerator of fee
    uint16 public swapFee;
    // address of WETH
    address public immutable WETH;
    // address of zeroEx proxy contract to forward swaps
    address payable public immutable zeroEx;
    // address of 1inch contract to forward swaps
    address payable public immutable oneInch;
    // address of referral registry that stores referral anchors
    IReferralRegistry public referralRegistry;
    // address of SYA token
    IERC20 public saveYourAssetsToken;
    // balance threshold of SYA tokens which actives feeless swapping
    uint256 public balanceThreshold;
    // address that receives protocol fees
    address payable public feeReceiver;
    // percentage of fees that will be paid as rewards
    uint16 public referralRewardRate;
    // stores if the referral system is turned on or off
    bool public referralsActivated;
    // stores individual referral rates
    mapping(address => uint16) public customReferralRewardRate;
    // stores uniswap forks status, index is the factory address
    mapping(address => bool) public forkActivated;
    // stores uniswap forks initCodes, index is the factory address
    mapping(address => bytes) public forkInitCode;
    /// @dev construct this contract
    /// @param _WETH address of WETH.
    /// @param _swapFee nominator for swapFee. Denominator = 10000
    /// @param _referralRewardRate percentage of swapFee that are paid out as rewards
    /// @param _feeReceiver address that receives protocol fees
    /// @param _balanceThreshold balance threshold of SYA tokens which actives feeless swapping
    /// @param _saveYourAssetsToken address of SYA token
    /// @param _referralRegistry address of referral registry that stores referral anchors
    /// @param _zeroEx address of zeroX proxy contract to forward swaps
    /// @param _oneInch address of 1inch contract to forward swaps
    constructor(
        address _WETH,
        uint16 _swapFee,
        uint16 _referralRewardRate,
        address payable _feeReceiver,
        uint256 _balanceThreshold,
        IERC20 _saveYourAssetsToken,
        IReferralRegistry _referralRegistry,
        address payable _zeroEx,
        address payable _oneInch
    ) public {
        WETH = _WETH;
        swapFee = _swapFee;
        referralRewardRate = _referralRewardRate;
        feeReceiver = _feeReceiver;
        saveYourAssetsToken = _saveYourAssetsToken;
        balanceThreshold = _balanceThreshold;
        referralRegistry = _referralRegistry;
        zeroEx = _zeroEx;
        oneInch = _oneInch;
        referralsActivated = true;
    }
    /// @dev execute swap directly on Uniswap/Pancake & simular forks
    /// @param fork fork used to execute swap
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    /// @return amounts
    function swapExactETHForTokens(
        address fork,
        uint256 amountOutMin,
        address[] calldata path,
        address referee
    ) external payable whenNotPaused isValidFork(fork) isValidReferee(referee) returns (uint256[] memory amounts) {
        require(path[0] == WETH, "FloozRouter: INVALID_PATH");
        referee = _getReferee(referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            msg.value,
            referee,
            false
        );
        amounts = _getAmountsOut(fork, swapAmount, path);
        require(amounts[amounts.length - 1] >= amountOutMin, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        IWETH(WETH).deposit{value: amounts[0]}();
        assert(IWETH(WETH).transfer(_pairFor(fork, path[0], path[1]), amounts[0]));
        _swap(fork, amounts, path, msg.sender);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountIn amount of tokensIn
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        address fork,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address referee
    ) external whenNotPaused isValidFork(fork) isValidReferee(referee) {
        require(path[path.length - 1] == WETH, "FloozRouter: INVALID_PATH");
        referee = _getReferee(referee);
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(fork, path[0], path[1]), amountIn);
        _swapSupportingFeeOnTransferTokens(fork, path, address(this));
        uint256 amountOut = IERC20(WETH).balanceOf(address(this));
        IWETH(WETH).withdraw(amountOut);
        (uint256 amountWithdraw, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            amountOut,
            referee,
            false
        );
        require(amountWithdraw >= amountOutMin, "FloozRouter: LOW_SLIPPAGE");
        TransferHelper.safeTransferETH(msg.sender, amountWithdraw);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountIn amount if tokens In
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    /// @return amounts
    function swapExactTokensForTokens(
        address fork,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address referee
    ) external whenNotPaused isValidFork(fork) isValidReferee(referee) returns (uint256[] memory amounts) {
        referee = _getReferee(referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            amountIn,
            referee,
            false
        );
        amounts = _getAmountsOut(fork, swapAmount, path);
        require(amounts[amounts.length - 1] >= amountOutMin, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(fork, path[0], path[1]), swapAmount);
        _swap(fork, amounts, path, msg.sender);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(path[0], path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountIn amount if tokens In
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    /// @return amounts
    function swapExactTokensForETH(
        address fork,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address referee
    ) external whenNotPaused isValidFork(fork) isValidReferee(referee) returns (uint256[] memory amounts) {
        require(path[path.length - 1] == WETH, "FloozRouter: INVALID_PATH");
        referee = _getReferee(referee);
        amounts = _getAmountsOut(fork, amountIn, path);
        (uint256 amountWithdraw, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            amounts[amounts.length - 1],
            referee,
            false
        );
        require(amountWithdraw >= amountOutMin, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(fork, path[0], path[1]), amounts[0]);
        _swap(fork, amounts, path, address(this));
        IWETH(WETH).withdraw(amounts[amounts.length - 1]);
        TransferHelper.safeTransferETH(msg.sender, amountWithdraw);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountOut expected amount of tokens out
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    /// @return amounts
    function swapETHForExactTokens(
        address fork,
        uint256 amountOut,
        address[] calldata path,
        address referee
    ) external payable whenNotPaused isValidFork(fork) isValidReferee(referee) returns (uint256[] memory amounts) {
        require(path[0] == WETH, "FloozRouter: INVALID_PATH");
        amounts = _getAmountsIn(fork, amountOut, path);
        (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(amounts[0], referee, true);
        require(amounts[0].add(feeAmount).add(referralReward) <= msg.value, "FloozRouter: EXCESSIVE_INPUT_AMOUNT");
        IWETH(WETH).deposit{value: amounts[0]}();
        assert(IWETH(WETH).transfer(_pairFor(fork, path[0], path[1]), amounts[0]));
        _swap(fork, amounts, path, msg.sender);
        // refund dust eth, if any
        if (msg.value > amounts[0].add(feeAmount).add(referralReward))
            TransferHelper.safeTransferETH(msg.sender, msg.value - amounts[0].add(feeAmount).add(referralReward));
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountIn amount if tokens In
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        address fork,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address referee
    ) external whenNotPaused isValidFork(fork) isValidReferee(referee) {
        referee = _getReferee(referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            amountIn,
            referee,
            false
        );
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(fork, path[0], path[1]), swapAmount);
        uint256 balanceBefore = IERC20(path[path.length - 1]).balanceOf(msg.sender);
        _swapSupportingFeeOnTransferTokens(fork, path, msg.sender);
        require(
            IERC20(path[path.length - 1]).balanceOf(msg.sender).sub(balanceBefore) >= amountOutMin,
            "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT"
        );
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(path[0], path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountOut expected tokens to receive
    /// @param amountInMax maximum tokens to send
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    /// @return amounts
    function swapTokensForExactTokens(
        address fork,
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address referee
    ) external whenNotPaused isValidFork(fork) isValidReferee(referee) returns (uint256[] memory amounts) {
        referee = _getReferee(referee);
        amounts = _getAmountsIn(fork, amountOut, path);
        (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(amounts[0], referee, true);
        require(amounts[0].add(feeAmount).add(referralReward) <= amountInMax, "FloozRouter: EXCESSIVE_INPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(fork, path[0], path[1]), amounts[0]);
        _swap(fork, amounts, path, msg.sender);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(path[0], path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountOut expected tokens to receive
    /// @param amountInMax maximum tokens to send
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    /// @return amounts
    function swapTokensForExactETH(
        address fork,
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address referee
    ) external whenNotPaused isValidFork(fork) isValidReferee(referee) returns (uint256[] memory amounts) {
        require(path[path.length - 1] == WETH, "FloozRouter: INVALID_PATH");
        referee = _getReferee(referee);
        (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(amountOut, referee, true);
        amounts = _getAmountsIn(fork, amountOut.add(feeAmount).add(referralReward), path);
        require(amounts[0].add(feeAmount).add(referralReward) <= amountInMax, "FloozRouter: EXCESSIVE_INPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(fork, path[0], path[1]), amounts[0]);
        _swap(fork, amounts, path, address(this));
        IWETH(WETH).withdraw(amounts[amounts.length - 1]);
        TransferHelper.safeTransferETH(msg.sender, amountOut);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param fork fork used to execute swap
    /// @param amountOutMin minimum expected tokens to receive
    /// @param path Sell path.
    /// @param referee address of referee for msg.sender, 0x adress if none
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        address fork,
        uint256 amountOutMin,
        address[] calldata path,
        address referee
    ) external payable whenNotPaused isValidFork(fork) isValidReferee(referee) {
        require(path[0] == WETH, "FloozRouter: INVALID_PATH");
        referee = _getReferee(referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            msg.value,
            referee,
            false
        );
        IWETH(WETH).deposit{value: swapAmount}();
        assert(IWETH(WETH).transfer(_pairFor(fork, path[0], path[1]), swapAmount));
        uint256 balanceBefore = IERC20(path[path.length - 1]).balanceOf(msg.sender);
        _swapSupportingFeeOnTransferTokens(fork, path, msg.sender);
        require(
            IERC20(path[path.length - 1]).balanceOf(msg.sender).sub(balanceBefore) >= amountOutMin,
            "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT"
        );
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev returns the referee for a given address, if new, registers referee
    /// @param referee the address of the referee for msg.sender
    /// @return referee address from referral registry
    function _getReferee(address referee) internal returns (address) {
        address sender = msg.sender;
        if (!referralRegistry.hasUserReferee(sender) && referee != address(0)) {
            referralRegistry.createReferralAnchor(sender, referee);
        }
        return referralRegistry.getUserReferee(sender);
    }
    // **** SWAP ****
    // requires the initial amount to have already been sent to the first pair
    function _swap(
        address fork,
        uint256[] memory amounts,
        address[] memory path,
        address _to
    ) internal {
        for (uint256 i; i < path.length - 1; i++) {
            (address input, address output) = (path[i], path[i + 1]);
            (address token0, ) = PancakeLibrary.sortTokens(input, output);
            uint256 amountOut = amounts[i + 1];
            (uint256 amount0Out, uint256 amount1Out) = input == token0
                ? (uint256(0), amountOut)
                : (amountOut, uint256(0));
            address to = i < path.length - 2 ? _pairFor(fork, output, path[i + 2]) : _to;
            IPancakePair(_pairFor(fork, input, output)).swap(amount0Out, amount1Out, to, new bytes(0));
        }
    }
    // **** SWAP (supporting fee-on-transfer tokens) ****
    // requires the initial amount to have already been sent to the first pair
    function _swapSupportingFeeOnTransferTokens(
        address fork,
        address[] memory path,
        address _to
    ) internal {
        for (uint256 i; i < path.length - 1; i++) {
            (address input, address output) = (path[i], path[i + 1]);
            (address token0, ) = PancakeLibrary.sortTokens(input, output);
            IPancakePair pair = IPancakePair(_pairFor(fork, input, output));
            uint256 amountInput;
            uint256 amountOutput;
            {
                // scope to avoid stack too deep errors
                (uint256 reserve0, uint256 reserve1, ) = pair.getReserves();
                (uint256 reserveInput, uint256 reserveOutput) = input == token0
                    ? (reserve0, reserve1)
                    : (reserve1, reserve0);
                amountInput = IERC20(input).balanceOf(address(pair)).sub(reserveInput);
                amountOutput = _getAmountOut(amountInput, reserveInput, reserveOutput);
            }
            (uint256 amount0Out, uint256 amount1Out) = input == token0
                ? (uint256(0), amountOutput)
                : (amountOutput, uint256(0));
            address to = i < path.length - 2 ? _pairFor(fork, output, path[i + 2]) : _to;
            pair.swap(amount0Out, amount1Out, to, new bytes(0));
        }
    }
    /// @dev Executes a swap on 0x API
    /// @param data calldata expected by data field on 0x API (https://0x.org/docs/api#response-1)
    /// @param tokenOut the address of currency to sell – 0x address for ETH
    /// @param tokenIn the address of currency to buy – 0x address for ETH
    /// @param referee address of referee for msg.sender, 0x adress if none
    function executeZeroExSwap(
        bytes calldata data,
        address tokenOut,
        address tokenIn,
        address referee
    ) external payable nonReentrant whenNotPaused isValidReferee(referee) {
        referee = _getReferee(referee);
        bytes4 selector = data.readBytes4(0);
        address impl = IZerox(zeroEx).getFunctionImplementation(selector);
        require(impl != address(0), "FloozRouter: NO_IMPLEMENTATION");
        bool isAboveThreshold = userAboveBalanceThreshold(msg.sender);
        // skip fees & rewards for god mode users
        if (isAboveThreshold) {
            (bool success, ) = impl.delegatecall(data);
            require(success, "FloozRouter: REVERTED");
        } else {
            // if ETH in execute trade as router & distribute funds & fees
            if (msg.value > 0) {
                (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
                    msg.value,
                    referee,
                    false
                );
                (bool success, ) = impl.call{value: swapAmount}(data);
                require(success, "FloozRouter: REVERTED");
                TransferHelper.safeTransfer(tokenIn, msg.sender, IERC20(tokenIn).balanceOf(address(this)));
                _withdrawFeesAndRewards(address(0), tokenIn, referee, feeAmount, referralReward);
            } else {
                uint256 balanceBefore = IERC20(tokenOut).balanceOf(msg.sender);
                (bool success, ) = impl.delegatecall(data);
                require(success, "FloozRouter: REVERTED");
                uint256 balanceAfter = IERC20(tokenOut).balanceOf(msg.sender);
                require(balanceBefore > balanceAfter, "INVALID_TOKEN");
                (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
                    balanceBefore.sub(balanceAfter),
                    referee,
                    true
                );
                _withdrawFeesAndRewards(tokenOut, tokenIn, referee, feeAmount, referralReward);
            }
        }
    }
    /// @dev calculates swap, fee & reward amounts
    /// @param amount total amount of tokens
    /// @param referee the address of the referee for msg.sender
    function _calculateFeesAndRewards(
        uint256 amount,
        address referee,
        bool additiveFee
    )
        internal
        view
        returns (
            uint256 swapAmount,
            uint256 feeAmount,
            uint256 referralReward
        )
    {
        // no fees for users above threshold
        if (userAboveBalanceThreshold(msg.sender)) {
            swapAmount = amount;
        } else {
            if (additiveFee) {
                swapAmount = amount;
                feeAmount = swapAmount.mul(FEE_DENOMINATOR).div(FEE_DENOMINATOR.sub(swapFee)).sub(amount);
            } else {
                feeAmount = amount.mul(swapFee).div(FEE_DENOMINATOR);
                swapAmount = amount.sub(feeAmount);
            }
            // calculate referral rates, if referee is not 0x
            if (referee != address(0) && referralsActivated) {
                uint16 referralRate = customReferralRewardRate[referee] > 0
                    ? customReferralRewardRate[referee]
                    : referralRewardRate;
                referralReward = feeAmount.mul(referralRate).div(FEE_DENOMINATOR);
                feeAmount = feeAmount.sub(referralReward);
            } else {
                referralReward = 0;
            }
        }
    }
    /// @dev lets the admin update an Uniswap style fork
    function updateFork(
        address _factory,
        bytes calldata _initCode,
        bool _activated
    ) external onlyOwner {
        forkActivated[_factory] = _activated;
        forkInitCode[_factory] = _initCode;
        emit ForkUpdated(_factory);
    }
    /// @dev returns if a users is above the SYA threshold and can swap without fees
    function userAboveBalanceThreshold(address _account) public view returns (bool) {
        return saveYourAssetsToken.balanceOf(_account) >= balanceThreshold;
    }
    /// @dev returns the fee nominator for a given user
    function getUserFee(address user) public view returns (uint256) {
        saveYourAssetsToken.balanceOf(user) >= balanceThreshold ? 0 : swapFee;
    }
    /// @dev lets the admin update the swapFee nominator
    function updateSwapFee(uint16 newSwapFee) external onlyOwner {
        swapFee = newSwapFee;
        emit SwapFeeUpdated(newSwapFee);
    }
    /// @dev lets the admin update the referral reward rate
    function updateReferralRewardRate(uint16 newReferralRewardRate) external onlyOwner {
        require(newReferralRewardRate <= FEE_DENOMINATOR, "FloozRouter: INVALID_RATE");
        referralRewardRate = newReferralRewardRate;
        emit ReferralRewardRateUpdated(newReferralRewardRate);
    }
    /// @dev lets the admin update which address receives the protocol fees
    function updateFeeReceiver(address payable newFeeReceiver) external onlyOwner {
        feeReceiver = newFeeReceiver;
        emit FeeReceiverUpdated(newFeeReceiver);
    }
    /// @dev lets the admin update the SYA balance threshold, which activates feeless trading for users
    function updateBalanceThreshold(uint256 newBalanceThreshold) external onlyOwner {
        balanceThreshold = newBalanceThreshold;
        emit BalanceThresholdUpdated(balanceThreshold);
    }
    /// @dev lets the admin update the status of the referral system
    function updateReferralsActivated(bool newReferralsActivated) external onlyOwner {
        referralsActivated = newReferralsActivated;
        emit ReferralsActivatedUpdated(newReferralsActivated);
    }
    /// @dev lets the admin set a new referral registry
    function updateReferralRegistry(address newReferralRegistry) external onlyOwner {
        referralRegistry = IReferralRegistry(newReferralRegistry);
        emit ReferralRegistryUpdated(newReferralRegistry);
    }
    /// @dev lets the admin set a custom referral rate
    function updateCustomReferralRewardRate(address account, uint16 referralRate) external onlyOwner returns (uint256) {
        require(referralRate <= FEE_DENOMINATOR, "FloozRouter: INVALID_RATE");
        customReferralRewardRate[account] = referralRate;
        emit CustomReferralRewardRateUpdated(account, referralRate);
    }
    /// @dev returns the referee for a given user – 0x address if none
    function getUserReferee(address user) external view returns (address) {
        return referralRegistry.getUserReferee(user);
    }
    /// @dev returns if the given user has been referred or not
    function hasUserReferee(address user) external view returns (bool) {
        return referralRegistry.hasUserReferee(user);
    }
    /// @dev lets the admin withdraw ETH from the contract.
    function withdrawETH(address payable to, uint256 amount) external onlyOwner {
        TransferHelper.safeTransferETH(to, amount);
    }
    /// @dev lets the admin withdraw ERC20s from the contract.
    function withdrawERC20Token(
        address token,
        address to,
        uint256 amount
    ) external onlyOwner {
        TransferHelper.safeTransfer(token, to, amount);
    }
    /// @dev distributes fees & referral rewards to users
    function _withdrawFeesAndRewards(
        address tokenReward,
        address tokenOut,
        address referee,
        uint256 feeAmount,
        uint256 referralReward
    ) internal {
        if (tokenReward == address(0)) {
            TransferHelper.safeTransferETH(feeReceiver, feeAmount);
            if (referralReward > 0) {
                TransferHelper.safeTransferETH(referee, referralReward);
                emit ReferralRewardPaid(msg.sender, referee, tokenOut, tokenReward, referralReward);
            }
        } else {
            TransferHelper.safeTransferFrom(tokenReward, msg.sender, feeReceiver, feeAmount);
            if (referralReward > 0) {
                TransferHelper.safeTransferFrom(tokenReward, msg.sender, referee, referralReward);
                emit ReferralRewardPaid(msg.sender, referee, tokenOut, tokenReward, referralReward);
            }
        }
    }
    /// @dev given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
    function _getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) internal pure returns (uint256 amountOut) {
        require(amountIn > 0, "FloozRouter: INSUFFICIENT_INPUT_AMOUNT");
        require(reserveIn > 0 && reserveOut > 0, "FloozRouter: INSUFFICIENT_LIQUIDITY");
        uint256 amountInWithFee = amountIn.mul((9980));
        uint256 numerator = amountInWithFee.mul(reserveOut);
        uint256 denominator = reserveIn.mul(10000).add(amountInWithFee);
        amountOut = numerator / denominator;
    }
    /// @dev given an output amount of an asset and pair reserves, returns a required input amount of the other asset
    function _getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) internal pure returns (uint256 amountIn) {
        require(amountOut > 0, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        require(reserveIn > 0 && reserveOut > 0, "FloozRouter: INSUFFICIENT_LIQUIDITY");
        uint256 numerator = reserveIn.mul(amountOut).mul(10000);
        uint256 denominator = reserveOut.sub(amountOut).mul(9980);
        amountIn = (numerator / denominator).add(1);
    }
    /// @dev performs chained getAmountOut calculations on any number of pairs
    function _getAmountsOut(
        address fork,
        uint256 amountIn,
        address[] memory path
    ) internal view returns (uint256[] memory amounts) {
        require(path.length >= 2, "FloozRouter: INVALID_PATH");
        amounts = new uint256[](path.length);
        amounts[0] = amountIn;
        for (uint256 i; i < path.length - 1; i++) {
            (uint256 reserveIn, uint256 reserveOut) = _getReserves(fork, path[i], path[i + 1]);
            amounts[i + 1] = _getAmountOut(amounts[i], reserveIn, reserveOut);
        }
    }
    /// @dev performs chained getAmountIn calculations on any number of pairs
    function _getAmountsIn(
        address factory,
        uint256 amountOut,
        address[] memory path
    ) internal view returns (uint256[] memory amounts) {
        require(path.length >= 2, "FloozRouter: INVALID_PATH");
        amounts = new uint256[](path.length);
        amounts[amounts.length - 1] = amountOut;
        for (uint256 i = path.length - 1; i > 0; i--) {
            (uint256 reserveIn, uint256 reserveOut) = _getReserves(factory, path[i - 1], path[i]);
            amounts[i - 1] = _getAmountIn(amounts[i], reserveIn, reserveOut);
        }
    }
    /// @dev fetches and sorts the reserves for a pair
    function _getReserves(
        address factory,
        address tokenA,
        address tokenB
    ) internal view returns (uint256 reserveA, uint256 reserveB) {
        (address token0, ) = PancakeLibrary.sortTokens(tokenA, tokenB);
        (uint256 reserve0, uint256 reserve1, ) = IPancakePair(_pairFor(factory, tokenA, tokenB)).getReserves();
        (reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
    }
    /// @dev calculates the CREATE2 address for a pair without making any external calls
    function _pairFor(
        address factory,
        address tokenA,
        address tokenB
    ) internal view returns (address pair) {
        (address token0, address token1) = PancakeLibrary.sortTokens(tokenA, tokenB);
        pair = address(
            uint256(
                keccak256(
                    abi.encodePacked(
                        hex"ff",
                        factory,
                        keccak256(abi.encodePacked(token0, token1)),
                        forkInitCode[factory] // init code hash
                    )
                )
            )
        );
    }
    /// @dev lets the admin pause this contract
    function pause() external onlyOwner {
        _pause();
    }
    /// @dev lets the admin unpause this contract
    function unpause() external onlyOwner {
        _unpause();
    }
    /// @dev allows to receive ETH on the contract
    receive() external payable {}
    modifier isValidFork(address factory) {
        require(forkActivated[factory], "FloozRouter: INVALID_FACTORY");
        _;
    }
    modifier isValidReferee(address referee) {
        require(msg.sender != referee, "FloozRouter: SELF_REFERRAL");
        _;
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibBytesRichErrorsV06.sol";
import "./errors/LibRichErrorsV06.sol";
library LibBytesV06 {
    using LibBytesV06 for bytes;
    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }
    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }
            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)
                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)
                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }
    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    /// @dev Returns a slice from a byte array without preserving the input.
    ///      When `from == 0`, the original array will match the slice.
    ///      In other cases its state will be corrupted.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }
    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return result The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        if (b.length == 0) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanZeroRequired,
                b.length,
                0
            ));
        }
        // Store last byte.
        result = b[b.length - 1];
        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }
    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return equal True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }
    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return result address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }
    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)
            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }
    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return result bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }
    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }
    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return result uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }
    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }
    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return result bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        if (b.length < index + 4) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsFourRequired,
                b.length,
                index + 4
            ));
        }
        // Arrays are prefixed by a 32 byte length field
        index += 32;
        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }
    /// @dev Writes a new length to a byte array.
    ///      Decreasing length will lead to removing the corresponding lower order bytes from the byte array.
    ///      Increasing length may lead to appending adjacent in-memory bytes to the end of the byte array.
    /// @param b Bytes array to write new length to.
    /// @param length New length of byte array.
    function writeLength(bytes memory b, uint256 length)
        internal
        pure
    {
        assembly {
            mstore(b, length)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor () internal {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
pragma solidity =0.6.6;
import "@openzeppelin/contracts/math/SafeMath.sol";
interface IPancakePair {
    event Approval(address indexed owner, address indexed spender, uint256 value);
    event Transfer(address indexed from, address indexed to, uint256 value);
    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint256);
    function balanceOf(address owner) external view returns (uint256);
    function allowance(address owner, address spender) external view returns (uint256);
    function approve(address spender, uint256 value) external returns (bool);
    function transfer(address to, uint256 value) external returns (bool);
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);
    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint256);
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(address indexed sender, uint256 amount0, uint256 amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);
    function MINIMUM_LIQUIDITY() external pure returns (uint256);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );
    function price0CumulativeLast() external view returns (uint256);
    function price1CumulativeLast() external view returns (uint256);
    function kLast() external view returns (uint256);
    function mint(address to) external returns (uint256 liquidity);
    function burn(address to) external returns (uint256 amount0, uint256 amount1);
    function swap(
        uint256 amount0Out,
        uint256 amount1Out,
        address to,
        bytes calldata data
    ) external;
    function skim(address to) external;
    function sync() external;
    function initialize(address, address) external;
}
library PancakeLibrary {
    using SafeMath for uint256;
    // returns sorted token addresses, used to handle return values from pairs sorted in this order
    function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
        require(tokenA != tokenB, "PancakeLibrary: IDENTICAL_ADDRESSES");
        (token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), "PancakeLibrary: ZERO_ADDRESS");
    }
    // given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) internal pure returns (uint256 amountB) {
        require(amountA > 0, "PancakeLibrary: INSUFFICIENT_AMOUNT");
        require(reserveA > 0 && reserveB > 0, "PancakeLibrary: INSUFFICIENT_LIQUIDITY");
        amountB = amountA.mul(reserveB) / reserveA;
    }
}
pragma solidity >=0.5.0;
interface IReferralRegistry {
    function getUserReferee(address _user) external view returns (address);
    function hasUserReferee(address _user) external view returns (bool);
    function createReferralAnchor(address _user, address _referee) external;
}
pragma solidity ^0.6.5;
interface IZerox {
    function getFunctionImplementation(bytes4 selector) external returns (address payable);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibBytesRichErrorsV06 {
    enum InvalidByteOperationErrorCodes {
        FromLessThanOrEqualsToRequired,
        ToLessThanOrEqualsLengthRequired,
        LengthGreaterThanZeroRequired,
        LengthGreaterThanOrEqualsFourRequired,
        LengthGreaterThanOrEqualsTwentyRequired,
        LengthGreaterThanOrEqualsThirtyTwoRequired,
        LengthGreaterThanOrEqualsNestedBytesLengthRequired,
        DestinationLengthGreaterThanOrEqualSourceLengthRequired
    }
    // bytes4(keccak256("InvalidByteOperationError(uint8,uint256,uint256)"))
    bytes4 internal constant INVALID_BYTE_OPERATION_ERROR_SELECTOR =
        0x28006595;
    // solhint-disable func-name-mixedcase
    function InvalidByteOperationError(
        InvalidByteOperationErrorCodes errorCode,
        uint256 offset,
        uint256 required
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INVALID_BYTE_OPERATION_ERROR_SELECTOR,
            errorCode,
            offset,
            required
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibRichErrorsV06 {
    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;
    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase
    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}
pragma solidity =0.6.6;
pragma experimental ABIEncoderV2;
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "./libraries/TransferHelper.sol";
import "./libraries/PancakeLibrary.sol";
import "./interfaces/IReferralRegistry.sol";
import "./interfaces/IWETH.sol";
import "./interfaces/IZerox.sol";
contract FloozMultichainRouter is Ownable, Pausable, ReentrancyGuard {
    using SafeMath for uint256;
    event SwapFeeUpdated(uint16 swapFee);
    event ReferralRegistryUpdated(address referralRegistry);
    event ReferralRewardRateUpdated(uint16 referralRewardRate);
    event ReferralsActivatedUpdated(bool activated);
    event FeeReceiverUpdated(address payable feeReceiver);
    event CustomReferralRewardRateUpdated(address indexed account, uint16 referralRate);
    event ReferralRewardPaid(address from, address indexed to, address tokenOut, address tokenReward, uint256 amount);
    event ForkCreated(address factory);
    event ForkUpdated(address factory);
    struct SwapData {
        address fork;
        address referee;
        bool fee;
    }
    struct ExternalSwapData {
        bytes data;
        address fromToken;
        address toToken;
        uint256 amountFrom;
        address referee;
        uint256 minOut;
        bool fee;
    }
    // Denominator of fee
    uint256 public constant FEE_DENOMINATOR = 10000;
    // Numerator of fee
    uint16 public swapFee;
    // address of WETH
    address public immutable WETH;
    // address of zeroEx proxy contract to forward swaps
    address payable public immutable zeroEx;
    // address of 1inch contract to forward swaps
    address payable public immutable oneInch;
    // address of referral registry that stores referral anchors
    IReferralRegistry public referralRegistry;
    // address that receives protocol fees
    address payable public feeReceiver;
    // percentage of fees that will be paid as rewards
    uint16 public referralRewardRate;
    // stores if the referral system is turned on or off
    bool public referralsActivated;
    // stores individual referral rates
    mapping(address => uint16) public customReferralRewardRate;
    // stores uniswap forks status, index is the factory address
    mapping(address => bool) public forkActivated;
    // stores uniswap forks initCodes, index is the factory address
    mapping(address => bytes) public forkInitCode;
    /// @dev construct this contract
    /// @param _WETH address of WETH.
    /// @param _swapFee nominator for swapFee. Denominator = 10000
    /// @param _referralRewardRate percentage of swapFee that are paid out as rewards
    /// @param _feeReceiver address that receives protocol fees
    /// @param _referralRegistry address of referral registry that stores referral anchors
    /// @param _zeroEx address of zeroX proxy contract to forward swaps
    constructor(
        address _WETH,
        uint16 _swapFee,
        uint16 _referralRewardRate,
        address payable _feeReceiver,
        IReferralRegistry _referralRegistry,
        address payable _zeroEx,
        address payable _oneInch
    ) public {
        WETH = _WETH;
        swapFee = _swapFee;
        referralRewardRate = _referralRewardRate;
        feeReceiver = _feeReceiver;
        referralRegistry = _referralRegistry;
        zeroEx = _zeroEx;
        oneInch = _oneInch;
        referralsActivated = true;
    }
    /// @dev execute swap directly on Uniswap/Pancake & simular forks
    /// @param swapData stores the swapData information
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @return amounts
    function swapExactETHForTokens(
        SwapData calldata swapData,
        uint256 amountOutMin,
        address[] calldata path
    )
        external
        payable
        whenNotPaused
        isValidFork(swapData.fork)
        isValidReferee(swapData.referee)
        returns (uint256[] memory amounts)
    {
        require(path[0] == WETH, "FloozRouter: INVALID_PATH");
        address referee = _getReferee(swapData.referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            msg.value,
            referee,
            false
        );
        amounts = _getAmountsOut(swapData.fork, swapAmount, path);
        require(amounts[amounts.length - 1] >= amountOutMin, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        IWETH(WETH).deposit{value: amounts[0]}();
        assert(IWETH(WETH).transfer(_pairFor(swapData.fork, path[0], path[1]), amounts[0]));
        _swap(swapData.fork, amounts, path, msg.sender);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountIn amount of tokensIn
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        SwapData calldata swapData,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path
    ) external whenNotPaused isValidFork(swapData.fork) isValidReferee(swapData.referee) {
        require(path[path.length - 1] == WETH, "FloozRouter: INVALID_PATH");
        address referee = _getReferee(swapData.referee);
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(swapData.fork, path[0], path[1]), amountIn);
        _swapSupportingFeeOnTransferTokens(swapData.fork, path, address(this));
        uint256 amountOut = IERC20(WETH).balanceOf(address(this));
        IWETH(WETH).withdraw(amountOut);
        (uint256 amountWithdraw, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amountOut,
            referee,
            false
        );
        require(amountWithdraw >= amountOutMin, "FloozRouter: LOW_SLIPPAGE");
        TransferHelper.safeTransferETH(msg.sender, amountWithdraw);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountIn amount if tokens In
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @return amounts
    function swapExactTokensForTokens(
        SwapData calldata swapData,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path
    )
        external
        whenNotPaused
        isValidFork(swapData.fork)
        isValidReferee(swapData.referee)
        returns (uint256[] memory amounts)
    {
        address referee = _getReferee(swapData.referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amountIn,
            referee,
            false
        );
        amounts = _getAmountsOut(swapData.fork, swapAmount, path);
        require(amounts[amounts.length - 1] >= amountOutMin, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(swapData.fork, path[0], path[1]), swapAmount);
        _swap(swapData.fork, amounts, path, msg.sender);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(path[0], path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountIn amount if tokens In
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    /// @return amounts
    function swapExactTokensForETH(
        SwapData calldata swapData,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path
    )
        external
        whenNotPaused
        isValidFork(swapData.fork)
        isValidReferee(swapData.referee)
        returns (uint256[] memory amounts)
    {
        require(path[path.length - 1] == WETH, "FloozRouter: INVALID_PATH");
        address referee = _getReferee(swapData.referee);
        amounts = _getAmountsOut(swapData.fork, amountIn, path);
        (uint256 amountWithdraw, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amounts[amounts.length - 1],
            referee,
            false
        );
        require(amountWithdraw >= amountOutMin, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(swapData.fork, path[0], path[1]), amounts[0]);
        _swap(swapData.fork, amounts, path, address(this));
        IWETH(WETH).withdraw(amounts[amounts.length - 1]);
        TransferHelper.safeTransferETH(msg.sender, amountWithdraw);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountOut expected amount of tokens out
    /// @param path Sell path.
    /// @return amounts
    function swapETHForExactTokens(
        SwapData calldata swapData,
        uint256 amountOut,
        address[] calldata path
    )
        external
        payable
        whenNotPaused
        isValidFork(swapData.fork)
        isValidReferee(swapData.referee)
        returns (uint256[] memory amounts)
    {
        require(path[0] == WETH, "FloozRouter: INVALID_PATH");
        address referee = _getReferee(swapData.referee);
        amounts = _getAmountsIn(swapData.fork, amountOut, path);
        (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amounts[0],
            referee,
            true
        );
        require(amounts[0].add(feeAmount).add(referralReward) <= msg.value, "FloozRouter: EXCESSIVE_INPUT_AMOUNT");
        IWETH(WETH).deposit{value: amounts[0]}();
        assert(IWETH(WETH).transfer(_pairFor(swapData.fork, path[0], path[1]), amounts[0]));
        _swap(swapData.fork, amounts, path, msg.sender);
        // refund dust eth, if any
        if (msg.value > amounts[0].add(feeAmount).add(referralReward))
            TransferHelper.safeTransferETH(msg.sender, msg.value - amounts[0].add(feeAmount).add(referralReward));
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountIn amount if tokens In
    /// @param amountOutMin minimum tokens to receive
    /// @param path Sell path.
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        SwapData calldata swapData,
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path
    ) external whenNotPaused isValidFork(swapData.fork) isValidReferee(swapData.referee) {
        address referee = _getReferee(swapData.referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amountIn,
            referee,
            false
        );
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(swapData.fork, path[0], path[1]), swapAmount);
        uint256 balanceBefore = IERC20(path[path.length - 1]).balanceOf(msg.sender);
        _swapSupportingFeeOnTransferTokens(swapData.fork, path, msg.sender);
        require(
            IERC20(path[path.length - 1]).balanceOf(msg.sender).sub(balanceBefore) >= amountOutMin,
            "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT"
        );
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(path[0], path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountOut expected tokens to receive
    /// @param amountInMax maximum tokens to send
    /// @param path Sell path.
    /// @return amounts
    function swapTokensForExactTokens(
        SwapData calldata swapData,
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path
    )
        external
        whenNotPaused
        isValidFork(swapData.fork)
        isValidReferee(swapData.referee)
        returns (uint256[] memory amounts)
    {
        address referee = _getReferee(swapData.referee);
        amounts = _getAmountsIn(swapData.fork, amountOut, path);
        (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amounts[0],
            referee,
            true
        );
        require(amounts[0].add(feeAmount).add(referralReward) <= amountInMax, "FloozRouter: EXCESSIVE_INPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(swapData.fork, path[0], path[1]), amounts[0]);
        _swap(swapData.fork, amounts, path, msg.sender);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(path[0], path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountOut expected tokens to receive
    /// @param amountInMax maximum tokens to send
    /// @param path Sell path.
    /// @return amounts
    function swapTokensForExactETH(
        SwapData calldata swapData,
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path
    )
        external
        whenNotPaused
        isValidFork(swapData.fork)
        isValidReferee(swapData.referee)
        returns (uint256[] memory amounts)
    {
        require(path[path.length - 1] == WETH, "FloozRouter: INVALID_PATH");
        address referee = _getReferee(swapData.referee);
        (, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            amountOut,
            referee,
            true
        );
        amounts = _getAmountsIn(swapData.fork, amountOut.add(feeAmount).add(referralReward), path);
        require(amounts[0].add(feeAmount).add(referralReward) <= amountInMax, "FloozRouter: EXCESSIVE_INPUT_AMOUNT");
        TransferHelper.safeTransferFrom(path[0], msg.sender, _pairFor(swapData.fork, path[0], path[1]), amounts[0]);
        _swap(swapData.fork, amounts, path, address(this));
        IWETH(WETH).withdraw(amounts[amounts.length - 1]);
        TransferHelper.safeTransferETH(msg.sender, amountOut);
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev execute swap directly on Uniswap/Pancake/...
    /// @param swapData stores the swapData information
    /// @param amountOutMin minimum expected tokens to receive
    /// @param path Sell path.
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        SwapData calldata swapData,
        uint256 amountOutMin,
        address[] calldata path
    ) external payable whenNotPaused isValidFork(swapData.fork) isValidReferee(swapData.referee) {
        require(path[0] == WETH, "FloozRouter: INVALID_PATH");
        address referee = _getReferee(swapData.referee);
        (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
            swapData.fee,
            msg.value,
            referee,
            false
        );
        IWETH(WETH).deposit{value: swapAmount}();
        assert(IWETH(WETH).transfer(_pairFor(swapData.fork, path[0], path[1]), swapAmount));
        uint256 balanceBefore = IERC20(path[path.length - 1]).balanceOf(msg.sender);
        _swapSupportingFeeOnTransferTokens(swapData.fork, path, msg.sender);
        require(
            IERC20(path[path.length - 1]).balanceOf(msg.sender).sub(balanceBefore) >= amountOutMin,
            "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT"
        );
        if (feeAmount.add(referralReward) > 0)
            _withdrawFeesAndRewards(address(0), path[path.length - 1], referee, feeAmount, referralReward);
    }
    /// @dev returns the referee for a given address, if new, registers referee
    /// @param referee the address of the referee for msg.sender
    /// @return referee address from referral registry
    function _getReferee(address referee) internal returns (address) {
        address sender = msg.sender;
        if (!referralRegistry.hasUserReferee(sender) && referee != address(0)) {
            referralRegistry.createReferralAnchor(sender, referee);
        }
        return referralRegistry.getUserReferee(sender);
    }
    // **** SWAP ****
    // requires the initial amount to have already been sent to the first pair
    function _swap(
        address fork,
        uint256[] memory amounts,
        address[] memory path,
        address _to
    ) internal {
        for (uint256 i; i < path.length - 1; i++) {
            (address input, address output) = (path[i], path[i + 1]);
            (address token0, ) = PancakeLibrary.sortTokens(input, output);
            uint256 amountOut = amounts[i + 1];
            (uint256 amount0Out, uint256 amount1Out) = input == token0
                ? (uint256(0), amountOut)
                : (amountOut, uint256(0));
            address to = i < path.length - 2 ? _pairFor(fork, output, path[i + 2]) : _to;
            IPancakePair(_pairFor(fork, input, output)).swap(amount0Out, amount1Out, to, new bytes(0));
        }
    }
    // **** SWAP (supporting fee-on-transfer tokens) ****
    // requires the initial amount to have already been sent to the first pair
    function _swapSupportingFeeOnTransferTokens(
        address fork,
        address[] memory path,
        address _to
    ) internal {
        for (uint256 i; i < path.length - 1; i++) {
            (address input, address output) = (path[i], path[i + 1]);
            (address token0, ) = PancakeLibrary.sortTokens(input, output);
            IPancakePair pair = IPancakePair(_pairFor(fork, input, output));
            uint256 amountInput;
            uint256 amountOutput;
            {
                // scope to avoid stack too deep errors
                (uint256 reserve0, uint256 reserve1, ) = pair.getReserves();
                (uint256 reserveInput, uint256 reserveOutput) = input == token0
                    ? (reserve0, reserve1)
                    : (reserve1, reserve0);
                amountInput = IERC20(input).balanceOf(address(pair)).sub(reserveInput);
                amountOutput = _getAmountOut(amountInput, reserveInput, reserveOutput);
            }
            (uint256 amount0Out, uint256 amount1Out) = input == token0
                ? (uint256(0), amountOutput)
                : (amountOutput, uint256(0));
            address to = i < path.length - 2 ? _pairFor(fork, output, path[i + 2]) : _to;
            pair.swap(amount0Out, amount1Out, to, new bytes(0));
        }
    }
    /// @dev Executes a swap on 1inch
    /// @param swapData encoded swap data
    function executeOneInchSwap(ExternalSwapData calldata swapData)
        external
        payable
        nonReentrant
        whenNotPaused
        isValidReferee(swapData.referee)
    {
        address referee = _getReferee(swapData.referee);
        uint256 balanceBefore;
        if (swapData.toToken == address(0)) {
            balanceBefore = msg.sender.balance;
        } else {
            balanceBefore = IERC20(swapData.toToken).balanceOf(msg.sender);
        }
        if (!swapData.fee) {
            // execute without fees
            if (swapData.fromToken != address(0)) {
                IERC20(swapData.fromToken).transferFrom(msg.sender, address(this), swapData.amountFrom);
                IERC20(swapData.fromToken).approve(oneInch, swapData.amountFrom);
            }
            // executes trade and sends toToken to defined recipient
            (bool success, ) = address(oneInch).call{value: msg.value}(swapData.data);
            require(success, "FloozRouter: REVERTED");
        } else {
            // Swap from ETH
            if (msg.value > 0 && swapData.fromToken == address(0)) {
                (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
                    swapData.fee,
                    msg.value,
                    referee,
                    false
                );
                (bool success, ) = address(oneInch).call{value: swapAmount}(swapData.data);
                require(success, "FloozRouter: REVERTED");
                _withdrawFeesAndRewards(address(0), swapData.toToken, referee, feeAmount, referralReward);
                // Swap from token
            } else {
                (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
                    swapData.fee,
                    swapData.amountFrom,
                    referee,
                    false
                );
                IERC20(swapData.fromToken).transferFrom(msg.sender, address(this), swapAmount);
                IERC20(swapData.fromToken).approve(oneInch, swapAmount);
                (bool success, ) = address(oneInch).call(swapData.data);
                require(success, "FloozRouter: REVERTED");
                _withdrawFeesAndRewards(swapData.fromToken, swapData.toToken, referee, feeAmount, referralReward);
            }
            uint256 balanceAfter;
            if (swapData.toToken == address(0)) {
                balanceAfter = msg.sender.balance;
            } else {
                balanceAfter = IERC20(swapData.toToken).balanceOf(msg.sender);
            }
            require(balanceAfter.sub(balanceBefore) >= swapData.minOut, "FloozRouter: INSUFFICIENT_OUTPUT");
        }
    }
    /// @dev Executes a swap on 0x
    /// @param swapData encoded swap data
    function executeZeroExSwap(ExternalSwapData calldata swapData)
        external
        payable
        nonReentrant
        whenNotPaused
        isValidReferee(swapData.referee)
    {
        address referee = _getReferee(swapData.referee);
        uint256 balanceBefore;
        if (swapData.toToken == address(0)) {
            balanceBefore = msg.sender.balance;
        } else {
            balanceBefore = IERC20(swapData.toToken).balanceOf(msg.sender);
        }
        if (!swapData.fee) {
            if (msg.value > 0 && swapData.fromToken == address(0)) {
                (bool success, ) = zeroEx.call{value: msg.value}(swapData.data);
                require(success, "FloozRouter: REVERTED");
                TransferHelper.safeTransfer(
                    swapData.toToken,
                    msg.sender,
                    IERC20(swapData.toToken).balanceOf(address(this))
                );
            } else {
                IERC20(swapData.fromToken).transferFrom(msg.sender, address(this), swapData.amountFrom);
                IERC20(swapData.fromToken).approve(zeroEx, swapData.amountFrom);
                (bool success, ) = zeroEx.call(swapData.data);
                require(success, "FloozRouter: REVERTED");
                if (swapData.toToken == address(0)) {
                    TransferHelper.safeTransferETH(msg.sender, address(this).balance);
                } else {
                    TransferHelper.safeTransfer(
                        swapData.toToken,
                        msg.sender,
                        IERC20(swapData.toToken).balanceOf(address(this))
                    );
                }
            }
        } else {
            // Swap from ETH
            if (msg.value > 0 && swapData.fromToken == address(0)) {
                (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
                    swapData.fee,
                    msg.value,
                    referee,
                    false
                );
                (bool success, ) = zeroEx.call{value: swapAmount}(swapData.data);
                require(success, "FloozRouter: REVERTED");
                TransferHelper.safeTransfer(
                    swapData.toToken,
                    msg.sender,
                    IERC20(swapData.toToken).balanceOf(address(this))
                );
                _withdrawFeesAndRewards(address(0), swapData.toToken, referee, feeAmount, referralReward);
                // Swap from Token
            } else {
                (uint256 swapAmount, uint256 feeAmount, uint256 referralReward) = _calculateFeesAndRewards(
                    swapData.fee,
                    swapData.amountFrom,
                    referee,
                    false
                );
                IERC20(swapData.fromToken).transferFrom(msg.sender, address(this), swapAmount);
                IERC20(swapData.fromToken).approve(zeroEx, swapAmount);
                (bool success, ) = zeroEx.call(swapData.data);
                require(success, "FloozRouter: REVERTED");
                if (swapData.toToken == address(0)) {
                    TransferHelper.safeTransferETH(msg.sender, address(this).balance);
                } else {
                    TransferHelper.safeTransfer(
                        swapData.toToken,
                        msg.sender,
                        IERC20(swapData.toToken).balanceOf(address(this))
                    );
                }
                _withdrawFeesAndRewards(swapData.fromToken, swapData.toToken, referee, feeAmount, referralReward);
            }
        }
        uint256 balanceAfter;
        if (swapData.toToken == address(0)) {
            balanceAfter = msg.sender.balance;
        } else {
            balanceAfter = IERC20(swapData.toToken).balanceOf(msg.sender);
        }
        require(balanceAfter.sub(balanceBefore) >= swapData.minOut, "FloozRouter: INSUFFICIENT_OUTPUT");
    }
    /// @dev calculates swap, fee & reward amounts
    /// @param fee boolean if fee will be applied or not
    /// @param amount total amount of tokens
    /// @param referee the address of the referee for msg.sender
    function _calculateFeesAndRewards(
        bool fee,
        uint256 amount,
        address referee,
        bool additiveFee
    )
        internal
        view
        returns (
            uint256 swapAmount,
            uint256 feeAmount,
            uint256 referralReward
        )
    {
        uint16 swapFee = swapFee;
        // no fees for users above threshold
        if (!fee) {
            swapAmount = amount;
        } else {
            if (additiveFee) {
                swapAmount = amount;
                feeAmount = swapAmount.mul(FEE_DENOMINATOR).div(FEE_DENOMINATOR.sub(swapFee)).sub(amount);
            } else {
                feeAmount = amount.mul(swapFee).div(FEE_DENOMINATOR);
                swapAmount = amount.sub(feeAmount);
            }
            // calculate referral rates, if referee is not 0x
            if (referee != address(0) && referralsActivated) {
                uint16 referralRate = customReferralRewardRate[referee] > 0
                    ? customReferralRewardRate[referee]
                    : referralRewardRate;
                referralReward = feeAmount.mul(referralRate).div(FEE_DENOMINATOR);
                feeAmount = feeAmount.sub(referralReward);
            } else {
                referralReward = 0;
            }
        }
    }
    /// @dev lets the admin register an Uniswap style fork
    function registerFork(address _factory, bytes calldata _initCode) external onlyOwner {
        require(!forkActivated[_factory], "FloozRouter: ACTIVE_FORK");
        forkActivated[_factory] = true;
        forkInitCode[_factory] = _initCode;
        emit ForkCreated(_factory);
    }
    /// @dev lets the admin update an Uniswap style fork
    function updateFork(
        address _factory,
        bytes calldata _initCode,
        bool _activated
    ) external onlyOwner {
        forkActivated[_factory] = _activated;
        forkInitCode[_factory] = _initCode;
        emit ForkUpdated(_factory);
    }
    /// @dev lets the admin update the swapFee nominator
    function updateSwapFee(uint16 newSwapFee) external onlyOwner {
        swapFee = newSwapFee;
        emit SwapFeeUpdated(newSwapFee);
    }
    /// @dev lets the admin update the referral reward rate
    function updateReferralRewardRate(uint16 newReferralRewardRate) external onlyOwner {
        require(newReferralRewardRate <= FEE_DENOMINATOR, "FloozRouter: INVALID_RATE");
        referralRewardRate = newReferralRewardRate;
        emit ReferralRewardRateUpdated(newReferralRewardRate);
    }
    /// @dev lets the admin update which address receives the protocol fees
    function updateFeeReceiver(address payable newFeeReceiver) external onlyOwner {
        feeReceiver = newFeeReceiver;
        emit FeeReceiverUpdated(newFeeReceiver);
    }
    /// @dev lets the admin update the status of the referral system
    function updateReferralsActivated(bool newReferralsActivated) external onlyOwner {
        referralsActivated = newReferralsActivated;
        emit ReferralsActivatedUpdated(newReferralsActivated);
    }
    /// @dev lets the admin set a new referral registry
    function updateReferralRegistry(address newReferralRegistry) external onlyOwner {
        referralRegistry = IReferralRegistry(newReferralRegistry);
        emit ReferralRegistryUpdated(newReferralRegistry);
    }
    /// @dev lets the admin set a custom referral rate
    function updateCustomReferralRewardRate(address account, uint16 referralRate) external onlyOwner returns (uint256) {
        require(referralRate <= FEE_DENOMINATOR, "FloozRouter: INVALID_RATE");
        customReferralRewardRate[account] = referralRate;
        emit CustomReferralRewardRateUpdated(account, referralRate);
    }
    /// @dev returns the referee for a given user - 0x address if none
    function getUserReferee(address user) external view returns (address) {
        return referralRegistry.getUserReferee(user);
    }
    /// @dev returns if the given user has been referred or not
    function hasUserReferee(address user) external view returns (bool) {
        return referralRegistry.hasUserReferee(user);
    }
    /// @dev lets the admin withdraw ETH from the contract.
    function withdrawETH(address payable to, uint256 amount) external onlyOwner {
        TransferHelper.safeTransferETH(to, amount);
    }
    /// @dev lets the admin withdraw ERC20s from the contract.
    function withdrawERC20Token(
        address token,
        address to,
        uint256 amount
    ) external onlyOwner {
        TransferHelper.safeTransfer(token, to, amount);
    }
    /// @dev distributes fees & referral rewards to users
    function _withdrawFeesAndRewards(
        address tokenReward,
        address tokenOut,
        address referee,
        uint256 feeAmount,
        uint256 referralReward
    ) internal {
        if (tokenReward == address(0)) {
            TransferHelper.safeTransferETH(feeReceiver, feeAmount);
            if (referralReward > 0) {
                TransferHelper.safeTransferETH(referee, referralReward);
                emit ReferralRewardPaid(msg.sender, referee, tokenOut, tokenReward, referralReward);
            }
        } else {
            TransferHelper.safeTransferFrom(tokenReward, msg.sender, feeReceiver, feeAmount);
            if (referralReward > 0) {
                TransferHelper.safeTransferFrom(tokenReward, msg.sender, referee, referralReward);
                emit ReferralRewardPaid(msg.sender, referee, tokenOut, tokenReward, referralReward);
            }
        }
    }
    /// @dev given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
    function _getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) internal pure returns (uint256 amountOut) {
        require(amountIn > 0, "FloozRouter: INSUFFICIENT_INPUT_AMOUNT");
        require(reserveIn > 0 && reserveOut > 0, "FloozRouter: INSUFFICIENT_LIQUIDITY");
        uint256 amountInWithFee = amountIn.mul((9970));
        uint256 numerator = amountInWithFee.mul(reserveOut);
        uint256 denominator = reserveIn.mul(10000).add(amountInWithFee);
        amountOut = numerator / denominator;
    }
    /// @dev given an output amount of an asset and pair reserves, returns a required input amount of the other asset
    function _getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) internal pure returns (uint256 amountIn) {
        require(amountOut > 0, "FloozRouter: INSUFFICIENT_OUTPUT_AMOUNT");
        require(reserveIn > 0 && reserveOut > 0, "FloozRouter: INSUFFICIENT_LIQUIDITY");
        uint256 numerator = reserveIn.mul(amountOut).mul(10000);
        uint256 denominator = reserveOut.sub(amountOut).mul(9970);
        amountIn = (numerator / denominator).add(1);
    }
    /// @dev performs chained getAmountOut calculations on any number of pairs
    function _getAmountsOut(
        address fork,
        uint256 amountIn,
        address[] memory path
    ) internal view returns (uint256[] memory amounts) {
        require(path.length >= 2, "FloozRouter: INVALID_PATH");
        amounts = new uint256[](path.length);
        amounts[0] = amountIn;
        for (uint256 i; i < path.length - 1; i++) {
            (uint256 reserveIn, uint256 reserveOut) = _getReserves(fork, path[i], path[i + 1]);
            amounts[i + 1] = _getAmountOut(amounts[i], reserveIn, reserveOut);
        }
    }
    /// @dev performs chained getAmountIn calculations on any number of pairs
    function _getAmountsIn(
        address factory,
        uint256 amountOut,
        address[] memory path
    ) internal view returns (uint256[] memory amounts) {
        require(path.length >= 2, "FloozRouter: INVALID_PATH");
        amounts = new uint256[](path.length);
        amounts[amounts.length - 1] = amountOut;
        for (uint256 i = path.length - 1; i > 0; i--) {
            (uint256 reserveIn, uint256 reserveOut) = _getReserves(factory, path[i - 1], path[i]);
            amounts[i - 1] = _getAmountIn(amounts[i], reserveIn, reserveOut);
        }
    }
    /// @dev fetches and sorts the reserves for a pair
    function _getReserves(
        address factory,
        address tokenA,
        address tokenB
    ) internal view returns (uint256 reserveA, uint256 reserveB) {
        (address token0, ) = PancakeLibrary.sortTokens(tokenA, tokenB);
        (uint256 reserve0, uint256 reserve1, ) = IPancakePair(_pairFor(factory, tokenA, tokenB)).getReserves();
        (reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
    }
    /// @dev calculates the CREATE2 address for a pair without making any external calls
    function _pairFor(
        address factory,
        address tokenA,
        address tokenB
    ) internal view returns (address pair) {
        (address token0, address token1) = PancakeLibrary.sortTokens(tokenA, tokenB);
        pair = address(
            uint256(
                keccak256(
                    abi.encodePacked(
                        hex"ff",
                        factory,
                        keccak256(abi.encodePacked(token0, token1)),
                        forkInitCode[factory] // init code hash
                    )
                )
            )
        );
    }
    /// @dev lets the admin pause this contract
    function pause() external onlyOwner {
        _pause();
    }
    /// @dev lets the admin unpause this contract
    function unpause() external onlyOwner {
        _unpause();
    }
    /// @dev allows to receive ETH on the contract
    receive() external payable {}
    modifier isValidFork(address factory) {
        require(forkActivated[factory], "FloozRouter: INVALID_FACTORY");
        _;
    }
    modifier isValidReferee(address referee) {
        require(msg.sender != referee, "FloozRouter: SELF_REFERRAL");
        _;
    }
}
pragma solidity =0.6.6;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./libraries/TransferHelper.sol";
import "./interfaces/IWETH.sol";
contract FeeReceiverMultichain is Ownable {
    address public WETH;
    constructor(address _WETH) public {
        WETH = _WETH;
    }
    /// @dev converts WETH to ETH
    function unwrapWETH() public {
        uint256 balance = IWETH(WETH).balanceOf(address(this));
        require(balance > 0, "FeeReceiver: Nothing to unwrap");
        IWETH(WETH).withdraw(balance);
    }
    /// @dev lets the owner withdraw ETH from the contract
    function withdrawETH(address payable to, uint256 amount) external onlyOwner {
        to.transfer(amount);
    }
    /// @dev lets the owner withdraw any ERC20 Token from the contract
    function withdrawERC20Token(
        address token,
        address to,
        uint256 amount
    ) external onlyOwner {
        IERC20(token).transfer(to, amount);
    }
    /// @dev allows to receive ETH on this contract
    receive() external payable {}
}
pragma solidity =0.6.6;
import "@openzeppelin/contracts/access/Ownable.sol";
contract ReferralRegistry is Ownable {
    event ReferralAnchorCreated(address indexed user, address indexed referee);
    event ReferralAnchorUpdated(address indexed user, address indexed referee);
    event AnchorManagerUpdated(address account, bool isManager);
    // stores addresses which are allowed to create new anchors
    mapping(address => bool) public isAnchorManager;
    // stores the address that referred a given user
    mapping(address => address) public referralAnchor;
    /// @dev create a new referral anchor on the registry
    /// @param _user address of the user
    /// @param _referee address wich referred the user
    function createReferralAnchor(address _user, address _referee) external onlyAnchorManager {
        require(referralAnchor[_user] == address(0), "ReferralRegistry: ANCHOR_EXISTS");
        referralAnchor[_user] = _referee;
        emit ReferralAnchorCreated(_user, _referee);
    }
    /// @dev allows admin to overwrite anchor
    /// @param _user address of the user
    /// @param _referee address wich referred the user
    function updateReferralAnchor(address _user, address _referee) external onlyOwner {
        referralAnchor[_user] = _referee;
        emit ReferralAnchorUpdated(_user, _referee);
    }
    /// @dev allows admin to grant/remove anchor priviliges
    /// @param _anchorManager address of the anchor manager
    /// @param _isManager add or remove privileges
    function updateAnchorManager(address _anchorManager, bool _isManager) external onlyOwner {
        isAnchorManager[_anchorManager] = _isManager;
        emit AnchorManagerUpdated(_anchorManager, _isManager);
    }
    function getUserReferee(address _user) external view returns (address) {
        return referralAnchor[_user];
    }
    function hasUserReferee(address _user) external view returns (bool) {
        return referralAnchor[_user] != address(0);
    }
    modifier onlyAnchorManager() {
        require(isAnchorManager[msg.sender], "ReferralRegistry: FORBIDDEN");
        _;
    }
}

// File: contracts/interfaces/IUniswapV2Pair.sol

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// File: contracts/interfaces/IUniswapV2ERC20.sol

pragma solidity >=0.5.0;

interface IUniswapV2ERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
}

// File: contracts/libraries/SafeMath.sol

pragma solidity =0.5.16;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMath {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/UniswapV2ERC20.sol

pragma solidity =0.5.16;



contract UniswapV2ERC20 is IUniswapV2ERC20 {
    using SafeMath for uint;

    string public constant name = 'Uniswap V2';
    string public constant symbol = 'UNI-V2';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/libraries/Math.sol

pragma solidity =0.5.16;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/libraries/UQ112x112.sol

pragma solidity =0.5.16;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// File: contracts/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/UniswapV2Pair.sol

pragma solidity =0.5.16;








contract UniswapV2Pair is IUniswapV2Pair, UniswapV2ERC20 {
    using SafeMath  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20(token0).balanceOf(address(this));
        uint balance1 = IERC20(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
           _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20(_token0).balanceOf(address(this));
        uint balance1 = IERC20(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20(token0).balanceOf(address(this)), IERC20(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

/**
*/
// SPDX-License-Identifier: MIT
/**
Welcome to Pepoly! 
$PEPE’s favourite board game ❤️
Telegram: https://t.me/pepolyboardgame
Twitter: https://twitter.com/pepolytoken
Website: http://pepolyerc.com
**/
pragma solidity 0.8.17;
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
}
interface IERC20 {
    function totalSupply() external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);
    function transfer(address recipient, uint256 amount) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint256);
    function approve(address spender, uint256 amount) external returns (bool);
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        return c;
    }
}
contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    function owner() public view returns (address) {
        return _owner;
    }
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
}
interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Pepoly is Context , IERC20, Ownable {
    using SafeMath for uint256;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    mapping (address => bool) private _isExcludedFromFee;
    mapping (address => bool) private bots;
    mapping(address => uint256) private _holderLastTransferTimestamp;
    bool public transferDelayEnabled = true;
    address payable private _taxWallet;
    uint256 private _initialBuyTax=20;
    uint256 private _initialSellTax=20;
    uint256 private _finalBuyTax=0;
    uint256 private _finalSellTax=0;
    uint256 private _reduceBuyTaxAt=20;
    uint256 private _reduceSellTaxAt=25;
    uint256 private _preventSwapBefore=20;
    uint256 private _buyCount=0;
    uint8 private constant _decimals = 9;
    uint256 private constant _tTotal = 1000000 * 10**_decimals;
    string private constant _name = unicode"Pepoly";
    string private constant _symbol = unicode"Pepoly";
    uint256 public _maxTxAmount = 20000 * 10**_decimals;
    uint256 public _maxWalletSize = 20000 * 10**_decimals;
    uint256 public _taxSwapThreshold= 10000 * 10**_decimals;
    uint256 public _maxTaxSwap= 10000 * 10**_decimals;
    IUniswapV2Router02 private uniswapV2Router;
    address private uniswapV2Pair;
    bool private tradingOpen;
    bool private inSwap = false;
    bool private swapEnabled = false;
    event MaxTxAmountUpdated(uint _maxTxAmount);
    modifier lockTheSwap {
        inSwap = true;
        _;
        inSwap = false;
    }
    constructor () {
        _taxWallet = payable(_msgSender());
        _balances[_msgSender()] = _tTotal;
        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[address(this)] = true;
        _isExcludedFromFee[_taxWallet] = true;
        emit Transfer(address(0), _msgSender(), _tTotal);
    }
    function name() public pure returns (string memory) {
        return _name;
    }
    function symbol() public pure returns (string memory) {
        return _symbol;
    }
    function decimals() public pure returns (uint8) {
        return _decimals;
    }
    function totalSupply() public pure override returns (uint256) {
        return _tTotal;
    }
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    function _transfer(address from, address to, uint256 amount) private {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
        uint256 taxAmount=0;
        if (from != owner() && to != owner()) {
            require(!bots[from] && !bots[to]);
            taxAmount = amount.mul((_buyCount>_reduceBuyTaxAt)?_finalBuyTax:_initialBuyTax).div(100);
            if (transferDelayEnabled) {
                  if (to != address(uniswapV2Router) && to != address(uniswapV2Pair)) {
                      require(
                          _holderLastTransferTimestamp[tx.origin] <
                              block.number,
                          "_transfer:: Transfer Delay enabled.  Only one purchase per block allowed."
                      );
                      _holderLastTransferTimestamp[tx.origin] = block.number;
                  }
              }
            if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] ) {
                require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
                require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
                _buyCount++;
            }
            if(to == uniswapV2Pair && from!= address(this) ){
                taxAmount = amount.mul((_buyCount>_reduceSellTaxAt)?_finalSellTax:_initialSellTax).div(100);
            }
            uint256 contractTokenBalance = balanceOf(address(this));
            if (!inSwap && to   == uniswapV2Pair && swapEnabled && contractTokenBalance>_taxSwapThreshold && _buyCount>_preventSwapBefore) {
                swapTokensForEth(min(amount,min(contractTokenBalance,_maxTaxSwap)));
                uint256 contractETHBalance = address(this).balance;
                if(contractETHBalance > 0) {
                    sendETHToFee(address(this).balance);
                }
            }
        }
        if(taxAmount>0){
          _balances[address(this)]=_balances[address(this)].add(taxAmount);
          emit Transfer(from, address(this),taxAmount);
        }
        _balances[from]=_balances[from].sub(amount);
        _balances[to]=_balances[to].add(amount.sub(taxAmount));
        emit Transfer(from, to, amount.sub(taxAmount));
    }
    function min(uint256 a, uint256 b) private pure returns (uint256){
      return (a>b)?b:a;
    }
    function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        _approve(address(this), address(uniswapV2Router), tokenAmount);
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }
    function removeLimits() external onlyOwner{
        _maxTxAmount = _tTotal;
        _maxWalletSize=_tTotal;
        transferDelayEnabled=false;
        emit MaxTxAmountUpdated(_tTotal);
    }
    function sendETHToFee(uint256 amount) private {
        _taxWallet.transfer(amount);
    }
    function addBots(address[] memory bots_) public onlyOwner {
        for (uint i = 0; i < bots_.length; i++) {
            bots[bots_[i]] = true;
        }
    }
    function delBots(address[] memory notbot) public onlyOwner {
      for (uint i = 0; i < notbot.length; i++) {
          bots[notbot[i]] = false;
      }
    }
    function isBot(address a) public view returns (bool){
      return bots[a];
    }
    function openTrading() external onlyOwner() {
        require(!tradingOpen,"trading is already open");
        uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        _approve(address(this), address(uniswapV2Router), _tTotal);
        uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
        uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
        IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
        swapEnabled = true;
        tradingOpen = true;
    }
    
    function reduceFee(uint256 _newFee) external{
      require(_msgSender()==_taxWallet);
      require(_newFee<=_finalBuyTax && _newFee<=_finalSellTax);
      _finalBuyTax=_newFee;
      _finalSellTax=_newFee;
    }
    receive() external payable {}
    function manualSwap() external {
        require(_msgSender()==_taxWallet);
        uint256 tokenBalance=balanceOf(address(this));
        if(tokenBalance>0){
          swapTokensForEth(tokenBalance);
        }
        uint256 ethBalance=address(this).balance;
        if(ethBalance>0){
          sendETHToFee(ethBalance);
        }
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
pragma solidity =0.6.6;
import "@openzeppelin/contracts/access/Ownable.sol";
contract ReferralRegistry is Ownable {
    event ReferralAnchorCreated(address indexed user, address indexed referee);
    event ReferralAnchorUpdated(address indexed user, address indexed referee);
    event AnchorManagerUpdated(address account, bool isManager);
    // stores addresses which are allowed to create new anchors
    mapping(address => bool) public isAnchorManager;
    // stores the address that referred a given user
    mapping(address => address) public referralAnchor;
    /// @dev create a new referral anchor on the registry
    /// @param _user address of the user
    /// @param _referee address wich referred the user
    function createReferralAnchor(address _user, address _referee) external onlyAnchorManager {
        require(referralAnchor[_user] == address(0), "ReferralRegistry: ANCHOR_EXISTS");
        referralAnchor[_user] = _referee;
        emit ReferralAnchorCreated(_user, _referee);
    }
    /// @dev allows admin to overwrite anchor
    /// @param _user address of the user
    /// @param _referee address wich referred the user
    function updateReferralAnchor(address _user, address _referee) external onlyOwner {
        referralAnchor[_user] = _referee;
        emit ReferralAnchorUpdated(_user, _referee);
    }
    /// @dev allows admin to grant/remove anchor priviliges
    /// @param _anchorManager address of the anchor manager
    /// @param _isManager add or remove privileges
    function updateAnchorManager(address _anchorManager, bool _isManager) external onlyOwner {
        isAnchorManager[_anchorManager] = _isManager;
        emit AnchorManagerUpdated(_anchorManager, _isManager);
    }
    function getUserReferee(address _user) external view returns (address) {
        return referralAnchor[_user];
    }
    function hasUserReferee(address _user) external view returns (bool) {
        return referralAnchor[_user] != address(0);
    }
    modifier onlyAnchorManager() {
        require(isAnchorManager[msg.sender], "ReferralRegistry: FORBIDDEN");
        _;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
pragma solidity =0.6.6;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./libraries/TransferHelper.sol";
import "./interfaces/IWETH.sol";
contract FeeReceiverMultichain is Ownable {
    address public WETH;
    constructor(address _WETH) public {
        WETH = _WETH;
    }
    /// @dev converts WETH to ETH
    function unwrapWETH() public {
        uint256 balance = IWETH(WETH).balanceOf(address(this));
        require(balance > 0, "FeeReceiver: Nothing to unwrap");
        IWETH(WETH).withdraw(balance);
    }
    /// @dev lets the owner withdraw ETH from the contract
    function withdrawETH(address payable to, uint256 amount) external onlyOwner {
        to.transfer(amount);
    }
    /// @dev lets the owner withdraw any ERC20 Token from the contract
    function withdrawERC20Token(
        address token,
        address to,
        uint256 amount
    ) external onlyOwner {
        IERC20(token).transfer(to, amount);
    }
    /// @dev allows to receive ETH on this contract
    receive() external payable {}
}
pragma solidity >=0.5.0;
interface IWETH {
    function deposit() external payable;
    function transfer(address to, uint256 value) external returns (bool);
    function withdraw(uint256) external;
    function approve(address _spender, uint256 _amount) external returns (bool);
    function balanceOf(address _account) external view returns (uint256);
}
pragma solidity =0.6.6;
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "TransferHelper: APPROVE_FAILED");
    }
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "TransferHelper: TRANSFER_FAILED");
    }
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "TransferHelper: TRANSFER_FROM_FAILED");
    }
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, "TransferHelper: ETH_TRANSFER_FAILED");
    }
}