// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./UpgradeableProxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is UpgradeableProxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
     */
    constructor(address _logic, address admin_, bytes memory _data) public payable UpgradeableProxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _setAdmin(admin_);
    }
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _admin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _admin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        require(newAdmin != address(0), "TransparentUpgradeableProxy: new admin is the zero address");
        emit AdminChanged(_admin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external virtual ifAdmin {
        _upgradeTo(newImplementation);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable virtual ifAdmin {
        _upgradeTo(newImplementation);
        Address.functionDelegateCall(newImplementation, data);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address adm) {
        bytes32 slot = _ADMIN_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            adm := sload(slot)
        }
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        bytes32 slot = _ADMIN_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newAdmin)
        }
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./Proxy.sol";
import "../utils/Address.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 *
 * Upgradeability is only provided internally through {_upgradeTo}. For an externally upgradeable proxy see
 * {TransparentUpgradeableProxy}.
 */
contract UpgradeableProxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) public payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if(_data.length > 0) {
            Address.functionDelegateCall(_logic, _data);
        }
    }
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            impl := sload(slot)
        }
    }
    /**
     * @dev Upgrades the proxy to a new implementation.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal virtual {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newImplementation)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _changeAdmin(admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
import {
    AlreadyInit,
    NotOrigin,
    DataTooLarge,
    AlreadyPaused,
    AlreadyUnpaused,
    Paused,
    InsufficientValue,
    InsufficientSubmissionCost,
    NotAllowedOrigin,
    RetryableData,
    NotRollupOrOwner
} from "../libraries/Error.sol";
import "./IInbox.sol";
import "./ISequencerInbox.sol";
import "./IBridge.sol";
import "./Messages.sol";
import "../libraries/AddressAliasHelper.sol";
import "../libraries/DelegateCallAware.sol";
import {
    L2_MSG,
    L1MessageType_L2FundedByL1,
    L1MessageType_submitRetryableTx,
    L1MessageType_ethDeposit,
    L2MessageType_unsignedEOATx,
    L2MessageType_unsignedContractTx
} from "../libraries/MessageTypes.sol";
import {MAX_DATA_SIZE} from "../libraries/Constants.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
/**
 * @title Inbox for user and contract originated messages
 * @notice Messages created via this inbox are enqueued in the delayed accumulator
 * to await inclusion in the SequencerInbox
 */
contract Inbox is DelegateCallAware, PausableUpgradeable, IInbox {
    IBridge public bridge;
    ISequencerInbox public sequencerInbox;
    /// ------------------------------------ allow list start ------------------------------------ ///
    bool public allowListEnabled;
    mapping(address => bool) public isAllowed;
    event AllowListAddressSet(address indexed user, bool val);
    event AllowListEnabledUpdated(bool isEnabled);
    function setAllowList(address[] memory user, bool[] memory val) external onlyRollupOrOwner {
        require(user.length == val.length, "INVALID_INPUT");
        for (uint256 i = 0; i < user.length; i++) {
            isAllowed[user[i]] = val[i];
            emit AllowListAddressSet(user[i], val[i]);
        }
    }
    function setAllowListEnabled(bool _allowListEnabled) external onlyRollupOrOwner {
        require(_allowListEnabled != allowListEnabled, "ALREADY_SET");
        allowListEnabled = _allowListEnabled;
        emit AllowListEnabledUpdated(_allowListEnabled);
    }
    /// @dev this modifier checks the tx.origin instead of msg.sender for convenience (ie it allows
    /// allowed users to interact with the token bridge without needing the token bridge to be allowList aware).
    /// this modifier is not intended to use to be used for security (since this opens the allowList to
    /// a smart contract phishing risk).
    modifier onlyAllowed() {
        // solhint-disable-next-line avoid-tx-origin
        if (allowListEnabled && !isAllowed[tx.origin]) revert NotAllowedOrigin(tx.origin);
        _;
    }
    /// ------------------------------------ allow list end ------------------------------------ ///
    modifier onlyRollupOrOwner() {
        IOwnable rollup = bridge.rollup();
        if (msg.sender != address(rollup)) {
            address rollupOwner = rollup.owner();
            if (msg.sender != rollupOwner) {
                revert NotRollupOrOwner(msg.sender, address(rollup), rollupOwner);
            }
        }
        _;
    }
    /// @inheritdoc IInbox
    function pause() external onlyRollupOrOwner {
        _pause();
    }
    /// @inheritdoc IInbox
    function unpause() external onlyRollupOrOwner {
        _unpause();
    }
    function initialize(IBridge _bridge, ISequencerInbox _sequencerInbox)
        external
        initializer
        onlyDelegated
    {
        bridge = _bridge;
        sequencerInbox = _sequencerInbox;
        allowListEnabled = false;
        __Pausable_init();
    }
    /// @inheritdoc IInbox
    function postUpgradeInit(IBridge _bridge) external onlyDelegated onlyProxyOwner {
        uint8 slotsToWipe = 3;
        for (uint8 i = 0; i < slotsToWipe; i++) {
            assembly {
                sstore(i, 0)
            }
        }
        allowListEnabled = false;
        bridge = _bridge;
    }
    /// @inheritdoc IInbox
    function sendL2MessageFromOrigin(bytes calldata messageData)
        external
        whenNotPaused
        onlyAllowed
        returns (uint256)
    {
        // solhint-disable-next-line avoid-tx-origin
        if (msg.sender != tx.origin) revert NotOrigin();
        if (messageData.length > MAX_DATA_SIZE)
            revert DataTooLarge(messageData.length, MAX_DATA_SIZE);
        uint256 msgNum = deliverToBridge(L2_MSG, msg.sender, keccak256(messageData));
        emit InboxMessageDeliveredFromOrigin(msgNum);
        return msgNum;
    }
    /// @inheritdoc IInbox
    function sendL2Message(bytes calldata messageData)
        external
        whenNotPaused
        onlyAllowed
        returns (uint256)
    {
        return _deliverMessage(L2_MSG, msg.sender, messageData);
    }
    function sendL1FundedUnsignedTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        uint256 nonce,
        address to,
        bytes calldata data
    ) external payable whenNotPaused onlyAllowed returns (uint256) {
        return
            _deliverMessage(
                L1MessageType_L2FundedByL1,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedEOATx,
                    gasLimit,
                    maxFeePerGas,
                    nonce,
                    uint256(uint160(to)),
                    msg.value,
                    data
                )
            );
    }
    function sendL1FundedContractTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        address to,
        bytes calldata data
    ) external payable whenNotPaused onlyAllowed returns (uint256) {
        return
            _deliverMessage(
                L1MessageType_L2FundedByL1,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedContractTx,
                    gasLimit,
                    maxFeePerGas,
                    uint256(uint160(to)),
                    msg.value,
                    data
                )
            );
    }
    function sendUnsignedTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        uint256 nonce,
        address to,
        uint256 value,
        bytes calldata data
    ) external whenNotPaused onlyAllowed returns (uint256) {
        return
            _deliverMessage(
                L2_MSG,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedEOATx,
                    gasLimit,
                    maxFeePerGas,
                    nonce,
                    uint256(uint160(to)),
                    value,
                    data
                )
            );
    }
    function sendContractTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        address to,
        uint256 value,
        bytes calldata data
    ) external whenNotPaused onlyAllowed returns (uint256) {
        return
            _deliverMessage(
                L2_MSG,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedContractTx,
                    gasLimit,
                    maxFeePerGas,
                    uint256(uint160(to)),
                    value,
                    data
                )
            );
    }
    /// @inheritdoc IInbox
    function calculateRetryableSubmissionFee(uint256 dataLength, uint256 baseFee)
        public
        view
        returns (uint256)
    {
        // Use current block basefee if baseFee parameter is 0
        return (1400 + 6 * dataLength) * (baseFee == 0 ? block.basefee : baseFee);
    }
    /// @inheritdoc IInbox
    function depositEth() public payable whenNotPaused onlyAllowed returns (uint256) {
        address dest = msg.sender;
        // solhint-disable-next-line avoid-tx-origin
        if (AddressUpgradeable.isContract(msg.sender) || tx.origin != msg.sender) {
            // isContract check fails if this function is called during a contract's constructor.
            dest = AddressAliasHelper.applyL1ToL2Alias(msg.sender);
        }
        return
            _deliverMessage(
                L1MessageType_ethDeposit,
                msg.sender,
                abi.encodePacked(dest, msg.value)
            );
    }
    /// @notice deprecated in favour of depositEth with no parameters
    function depositEth(uint256) external payable whenNotPaused onlyAllowed returns (uint256) {
        return depositEth();
    }
    /**
     * @notice deprecated in favour of unsafeCreateRetryableTicket
     * @dev deprecated in favour of unsafeCreateRetryableTicket
     * @dev Gas limit and maxFeePerGas should not be set to 1 as that is used to trigger the RetryableData error
     * @param to destination L2 contract address
     * @param l2CallValue call value for retryable L2 message
     * @param maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
     * @param excessFeeRefundAddress gasLimit x maxFeePerGas - execution cost gets credited here on L2 balance
     * @param callValueRefundAddress l2Callvalue gets credited here on L2 if retryable txn times out or gets cancelled
     * @param gasLimit Max gas deducted from user's L2 balance to cover L2 execution. Should not be set to 1 (magic value used to trigger the RetryableData error)
     * @param maxFeePerGas price bid for L2 execution. Should not be set to 1 (magic value used to trigger the RetryableData error)
     * @param data ABI encoded data of L2 message
     * @return unique message number of the retryable transaction
     */
    function createRetryableTicketNoRefundAliasRewrite(
        address to,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 gasLimit,
        uint256 maxFeePerGas,
        bytes calldata data
    ) external payable whenNotPaused onlyAllowed returns (uint256) {
        return
            unsafeCreateRetryableTicket(
                to,
                l2CallValue,
                maxSubmissionCost,
                excessFeeRefundAddress,
                callValueRefundAddress,
                gasLimit,
                maxFeePerGas,
                data
            );
    }
    /// @inheritdoc IInbox
    function createRetryableTicket(
        address to,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 gasLimit,
        uint256 maxFeePerGas,
        bytes calldata data
    ) external payable whenNotPaused onlyAllowed returns (uint256) {
        // ensure the user's deposit alone will make submission succeed
        if (msg.value < (maxSubmissionCost + l2CallValue + gasLimit * maxFeePerGas)) {
            revert InsufficientValue(
                maxSubmissionCost + l2CallValue + gasLimit * maxFeePerGas,
                msg.value
            );
        }
        // if a refund address is a contract, we apply the alias to it
        // so that it can access its funds on the L2
        // since the beneficiary and other refund addresses don't get rewritten by arb-os
        if (AddressUpgradeable.isContract(excessFeeRefundAddress)) {
            excessFeeRefundAddress = AddressAliasHelper.applyL1ToL2Alias(excessFeeRefundAddress);
        }
        if (AddressUpgradeable.isContract(callValueRefundAddress)) {
            // this is the beneficiary. be careful since this is the address that can cancel the retryable in the L2
            callValueRefundAddress = AddressAliasHelper.applyL1ToL2Alias(callValueRefundAddress);
        }
        return
            unsafeCreateRetryableTicket(
                to,
                l2CallValue,
                maxSubmissionCost,
                excessFeeRefundAddress,
                callValueRefundAddress,
                gasLimit,
                maxFeePerGas,
                data
            );
    }
    /// @inheritdoc IInbox
    function unsafeCreateRetryableTicket(
        address to,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 gasLimit,
        uint256 maxFeePerGas,
        bytes calldata data
    ) public payable whenNotPaused onlyAllowed returns (uint256) {
        // gas price and limit of 1 should never be a valid input, so instead they are used as
        // magic values to trigger a revert in eth calls that surface data without requiring a tx trace
        if (gasLimit == 1 || maxFeePerGas == 1)
            revert RetryableData(
                msg.sender,
                to,
                l2CallValue,
                msg.value,
                maxSubmissionCost,
                excessFeeRefundAddress,
                callValueRefundAddress,
                gasLimit,
                maxFeePerGas,
                data
            );
        uint256 submissionFee = calculateRetryableSubmissionFee(data.length, block.basefee);
        if (maxSubmissionCost < submissionFee)
            revert InsufficientSubmissionCost(submissionFee, maxSubmissionCost);
        return
            _deliverMessage(
                L1MessageType_submitRetryableTx,
                msg.sender,
                abi.encodePacked(
                    uint256(uint160(to)),
                    l2CallValue,
                    msg.value,
                    maxSubmissionCost,
                    uint256(uint160(excessFeeRefundAddress)),
                    uint256(uint160(callValueRefundAddress)),
                    gasLimit,
                    maxFeePerGas,
                    data.length,
                    data
                )
            );
    }
    function _deliverMessage(
        uint8 _kind,
        address _sender,
        bytes memory _messageData
    ) internal returns (uint256) {
        if (_messageData.length > MAX_DATA_SIZE)
            revert DataTooLarge(_messageData.length, MAX_DATA_SIZE);
        uint256 msgNum = deliverToBridge(_kind, _sender, keccak256(_messageData));
        emit InboxMessageDelivered(msgNum, _messageData);
        return msgNum;
    }
    function deliverToBridge(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) internal returns (uint256) {
        return
            bridge.enqueueDelayedMessage{value: msg.value}(
                kind,
                AddressAliasHelper.applyL1ToL2Alias(sender),
                messageDataHash
            );
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
/// @dev Init was already called
error AlreadyInit();
/// Init was called with param set to zero that must be nonzero
error HadZeroInit();
/// @dev Thrown when non owner tries to access an only-owner function
/// @param sender The msg.sender who is not the owner
/// @param owner The owner address
error NotOwner(address sender, address owner);
/// @dev Thrown when an address that is not the rollup tries to call an only-rollup function
/// @param sender The sender who is not the rollup
/// @param rollup The rollup address authorized to call this function
error NotRollup(address sender, address rollup);
/// @dev Thrown when the contract was not called directly from the origin ie msg.sender != tx.origin
error NotOrigin();
/// @dev Provided data was too large
/// @param dataLength The length of the data that is too large
/// @param maxDataLength The max length the data can be
error DataTooLarge(uint256 dataLength, uint256 maxDataLength);
/// @dev The provided is not a contract and was expected to be
/// @param addr The adddress in question
error NotContract(address addr);
/// @dev The merkle proof provided was too long
/// @param actualLength The length of the merkle proof provided
/// @param maxProofLength The max length a merkle proof can have
error MerkleProofTooLong(uint256 actualLength, uint256 maxProofLength);
/// @dev Thrown when an un-authorized address tries to access an admin function
/// @param sender The un-authorized sender
/// @param rollup The rollup, which would be authorized
/// @param owner The rollup's owner, which would be authorized
error NotRollupOrOwner(address sender, address rollup, address owner);
// Bridge Errors
/// @dev Thrown when an un-authorized address tries to access an only-inbox function
/// @param sender The un-authorized sender
error NotDelayedInbox(address sender);
/// @dev Thrown when an un-authorized address tries to access an only-sequencer-inbox function
/// @param sender The un-authorized sender
error NotSequencerInbox(address sender);
/// @dev Thrown when an un-authorized address tries to access an only-outbox function
/// @param sender The un-authorized sender
error NotOutbox(address sender);
/// @dev the provided outbox address isn't valid
/// @param outbox address of outbox being set
error InvalidOutboxSet(address outbox);
// Inbox Errors
/// @dev The contract is paused, so cannot be paused
error AlreadyPaused();
/// @dev The contract is unpaused, so cannot be unpaused
error AlreadyUnpaused();
/// @dev The contract is paused
error Paused();
/// @dev msg.value sent to the inbox isn't high enough
error InsufficientValue(uint256 expected, uint256 actual);
/// @dev submission cost provided isn't enough to create retryable ticket
error InsufficientSubmissionCost(uint256 expected, uint256 actual);
/// @dev address not allowed to interact with the given contract
error NotAllowedOrigin(address origin);
/// @dev used to convey retryable tx data in eth calls without requiring a tx trace
/// this follows a pattern similar to EIP-3668 where reverts surface call information
error RetryableData(
    address from,
    address to,
    uint256 l2CallValue,
    uint256 deposit,
    uint256 maxSubmissionCost,
    address excessFeeRefundAddress,
    address callValueRefundAddress,
    uint256 gasLimit,
    uint256 maxFeePerGas,
    bytes data
);
// Outbox Errors
/// @dev The provided proof was too long
/// @param proofLength The length of the too-long proof
error ProofTooLong(uint256 proofLength);
/// @dev The output index was greater than the maximum
/// @param index The output index
/// @param maxIndex The max the index could be
error PathNotMinimal(uint256 index, uint256 maxIndex);
/// @dev The calculated root does not exist
/// @param root The calculated root
error UnknownRoot(bytes32 root);
/// @dev The record has already been spent
/// @param index The index of the spent record
error AlreadySpent(uint256 index);
/// @dev A call to the bridge failed with no return data
error BridgeCallFailed();
// Sequencer Inbox Errors
/// @dev Thrown when someone attempts to read fewer messages than have already been read
error DelayedBackwards();
/// @dev Thrown when someone attempts to read more messages than exist
error DelayedTooFar();
/// @dev Force include can only read messages more blocks old than the delay period
error ForceIncludeBlockTooSoon();
/// @dev Force include can only read messages more seconds old than the delay period
error ForceIncludeTimeTooSoon();
/// @dev The message provided did not match the hash in the delayed inbox
error IncorrectMessagePreimage();
/// @dev This can only be called by the batch poster
error NotBatchPoster();
/// @dev The sequence number provided to this message was inconsistent with the number of batches already included
error BadSequencerNumber(uint256 stored, uint256 received);
/// @dev The batch data has the inbox authenticated bit set, but the batch data was not authenticated by the inbox
error DataNotAuthenticated();
/// @dev Tried to create an already valid Data Availability Service keyset
error AlreadyValidDASKeyset(bytes32);
/// @dev Tried to use or invalidate an already invalid Data Availability Service keyset
error NoSuchKeyset(bytes32);
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;
import "./IBridge.sol";
import "./IDelayedMessageProvider.sol";
import "./ISequencerInbox.sol";
interface IInbox is IDelayedMessageProvider {
    function bridge() external view returns (IBridge);
    function sequencerInbox() external view returns (ISequencerInbox);
    /**
     * @notice Send a generic L2 message to the chain
     * @dev This method is an optimization to avoid having to emit the entirety of the messageData in a log. Instead validators are expected to be able to parse the data from the transaction's input
     * @param messageData Data of the message being sent
     */
    function sendL2MessageFromOrigin(bytes calldata messageData) external returns (uint256);
    /**
     * @notice Send a generic L2 message to the chain
     * @dev This method can be used to send any type of message that doesn't require L1 validation
     * @param messageData Data of the message being sent
     */
    function sendL2Message(bytes calldata messageData) external returns (uint256);
    function sendL1FundedUnsignedTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        uint256 nonce,
        address to,
        bytes calldata data
    ) external payable returns (uint256);
    function sendL1FundedContractTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        address to,
        bytes calldata data
    ) external payable returns (uint256);
    function sendUnsignedTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        uint256 nonce,
        address to,
        uint256 value,
        bytes calldata data
    ) external returns (uint256);
    function sendContractTransaction(
        uint256 gasLimit,
        uint256 maxFeePerGas,
        address to,
        uint256 value,
        bytes calldata data
    ) external returns (uint256);
    /**
     * @notice Get the L1 fee for submitting a retryable
     * @dev This fee can be paid by funds already in the L2 aliased address or by the current message value
     * @dev This formula may change in the future, to future proof your code query this method instead of inlining!!
     * @param dataLength The length of the retryable's calldata, in bytes
     * @param baseFee The block basefee when the retryable is included in the chain, if 0 current block.basefee will be used
     */
    function calculateRetryableSubmissionFee(uint256 dataLength, uint256 baseFee)
        external
        view
        returns (uint256);
    /**
     * @notice Deposit eth from L1 to L2 to address of the sender if sender is an EOA, and to its aliased address if the sender is a contract
     * @dev This does not trigger the fallback function when receiving in the L2 side.
     *      Look into retryable tickets if you are interested in this functionality.
     * @dev This function should not be called inside contract constructors
     */
    function depositEth() external payable returns (uint256);
    /**
     * @notice Put a message in the L2 inbox that can be reexecuted for some fixed amount of time if it reverts
     * @dev all msg.value will deposited to callValueRefundAddress on L2
     * @dev Gas limit and maxFeePerGas should not be set to 1 as that is used to trigger the RetryableData error
     * @param to destination L2 contract address
     * @param l2CallValue call value for retryable L2 message
     * @param maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
     * @param excessFeeRefundAddress gasLimit x maxFeePerGas - execution cost gets credited here on L2 balance
     * @param callValueRefundAddress l2Callvalue gets credited here on L2 if retryable txn times out or gets cancelled
     * @param gasLimit Max gas deducted from user's L2 balance to cover L2 execution. Should not be set to 1 (magic value used to trigger the RetryableData error)
     * @param maxFeePerGas price bid for L2 execution. Should not be set to 1 (magic value used to trigger the RetryableData error)
     * @param data ABI encoded data of L2 message
     * @return unique message number of the retryable transaction
     */
    function createRetryableTicket(
        address to,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 gasLimit,
        uint256 maxFeePerGas,
        bytes calldata data
    ) external payable returns (uint256);
    /**
     * @notice Put a message in the L2 inbox that can be reexecuted for some fixed amount of time if it reverts
     * @dev Same as createRetryableTicket, but does not guarantee that submission will succeed by requiring the needed funds
     * come from the deposit alone, rather than falling back on the user's L2 balance
     * @dev Advanced usage only (does not rewrite aliases for excessFeeRefundAddress and callValueRefundAddress).
     * createRetryableTicket method is the recommended standard.
     * @dev Gas limit and maxFeePerGas should not be set to 1 as that is used to trigger the RetryableData error
     * @param to destination L2 contract address
     * @param l2CallValue call value for retryable L2 message
     * @param maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
     * @param excessFeeRefundAddress gasLimit x maxFeePerGas - execution cost gets credited here on L2 balance
     * @param callValueRefundAddress l2Callvalue gets credited here on L2 if retryable txn times out or gets cancelled
     * @param gasLimit Max gas deducted from user's L2 balance to cover L2 execution. Should not be set to 1 (magic value used to trigger the RetryableData error)
     * @param maxFeePerGas price bid for L2 execution. Should not be set to 1 (magic value used to trigger the RetryableData error)
     * @param data ABI encoded data of L2 message
     * @return unique message number of the retryable transaction
     */
    function unsafeCreateRetryableTicket(
        address to,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 gasLimit,
        uint256 maxFeePerGas,
        bytes calldata data
    ) external payable returns (uint256);
    // ---------- onlyRollupOrOwner functions ----------
    /// @notice pauses all inbox functionality
    function pause() external;
    /// @notice unpauses all inbox functionality
    function unpause() external;
    // ---------- initializer ----------
    /**
     * @dev function to be called one time during the inbox upgrade process
     *      this is used to fix the storage slots
     */
    function postUpgradeInit(IBridge _bridge) external;
    function initialize(IBridge _bridge, ISequencerInbox _sequencerInbox) external;
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;
pragma experimental ABIEncoderV2;
import "../libraries/IGasRefunder.sol";
import "./IDelayedMessageProvider.sol";
import "./IBridge.sol";
interface ISequencerInbox is IDelayedMessageProvider {
    struct MaxTimeVariation {
        uint256 delayBlocks;
        uint256 futureBlocks;
        uint256 delaySeconds;
        uint256 futureSeconds;
    }
    struct TimeBounds {
        uint64 minTimestamp;
        uint64 maxTimestamp;
        uint64 minBlockNumber;
        uint64 maxBlockNumber;
    }
    enum BatchDataLocation {
        TxInput,
        SeparateBatchEvent,
        NoData
    }
    event SequencerBatchDelivered(
        uint256 indexed batchSequenceNumber,
        bytes32 indexed beforeAcc,
        bytes32 indexed afterAcc,
        bytes32 delayedAcc,
        uint256 afterDelayedMessagesRead,
        TimeBounds timeBounds,
        BatchDataLocation dataLocation
    );
    event OwnerFunctionCalled(uint256 indexed id);
    /// @dev a separate event that emits batch data when this isn't easily accessible in the tx.input
    event SequencerBatchData(uint256 indexed batchSequenceNumber, bytes data);
    /// @dev a valid keyset was added
    event SetValidKeyset(bytes32 indexed keysetHash, bytes keysetBytes);
    /// @dev a keyset was invalidated
    event InvalidateKeyset(bytes32 indexed keysetHash);
    function totalDelayedMessagesRead() external view returns (uint256);
    function bridge() external view returns (IBridge);
    /// @dev The size of the batch header
    // solhint-disable-next-line func-name-mixedcase
    function HEADER_LENGTH() external view returns (uint256);
    /// @dev If the first batch data byte after the header has this bit set,
    ///      the sequencer inbox has authenticated the data. Currently not used.
    // solhint-disable-next-line func-name-mixedcase
    function DATA_AUTHENTICATED_FLAG() external view returns (bytes1);
    function rollup() external view returns (IOwnable);
    function isBatchPoster(address) external view returns (bool);
    struct DasKeySetInfo {
        bool isValidKeyset;
        uint64 creationBlock;
    }
    // https://github.com/ethereum/solidity/issues/11826
    // function maxTimeVariation() external view returns (MaxTimeVariation calldata);
    // function dasKeySetInfo(bytes32) external view returns (DasKeySetInfo calldata);
    /// @notice Force messages from the delayed inbox to be included in the chain
    ///         Callable by any address, but message can only be force-included after maxTimeVariation.delayBlocks and
    ///         maxTimeVariation.delaySeconds has elapsed. As part of normal behaviour the sequencer will include these
    ///         messages so it's only necessary to call this if the sequencer is down, or not including any delayed messages.
    /// @param _totalDelayedMessagesRead The total number of messages to read up to
    /// @param kind The kind of the last message to be included
    /// @param l1BlockAndTime The l1 block and the l1 timestamp of the last message to be included
    /// @param baseFeeL1 The l1 gas price of the last message to be included
    /// @param sender The sender of the last message to be included
    /// @param messageDataHash The messageDataHash of the last message to be included
    function forceInclusion(
        uint256 _totalDelayedMessagesRead,
        uint8 kind,
        uint64[2] calldata l1BlockAndTime,
        uint256 baseFeeL1,
        address sender,
        bytes32 messageDataHash
    ) external;
    function inboxAccs(uint256 index) external view returns (bytes32);
    function batchCount() external view returns (uint256);
    function isValidKeysetHash(bytes32 ksHash) external view returns (bool);
    /// @notice the creation block is intended to still be available after a keyset is deleted
    function getKeysetCreationBlock(bytes32 ksHash) external view returns (uint256);
    // ---------- BatchPoster functions ----------
    function addSequencerL2BatchFromOrigin(
        uint256 sequenceNumber,
        bytes calldata data,
        uint256 afterDelayedMessagesRead,
        IGasRefunder gasRefunder
    ) external;
    function addSequencerL2Batch(
        uint256 sequenceNumber,
        bytes calldata data,
        uint256 afterDelayedMessagesRead,
        IGasRefunder gasRefunder
    ) external;
    // ---------- onlyRollupOrOwner functions ----------
    /**
     * @notice Set max delay for sequencer inbox
     * @param maxTimeVariation_ the maximum time variation parameters
     */
    function setMaxTimeVariation(MaxTimeVariation memory maxTimeVariation_) external;
    /**
     * @notice Updates whether an address is authorized to be a batch poster at the sequencer inbox
     * @param addr the address
     * @param isBatchPoster_ if the specified address should be authorized as a batch poster
     */
    function setIsBatchPoster(address addr, bool isBatchPoster_) external;
    /**
     * @notice Makes Data Availability Service keyset valid
     * @param keysetBytes bytes of the serialized keyset
     */
    function setValidKeyset(bytes calldata keysetBytes) external;
    /**
     * @notice Invalidates a Data Availability Service keyset
     * @param ksHash hash of the keyset
     */
    function invalidateKeysetHash(bytes32 ksHash) external;
    // ---------- initializer ----------
    function initialize(IBridge bridge_, MaxTimeVariation calldata maxTimeVariation_) external;
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;
import "./IOwnable.sol";
interface IBridge {
    event MessageDelivered(
        uint256 indexed messageIndex,
        bytes32 indexed beforeInboxAcc,
        address inbox,
        uint8 kind,
        address sender,
        bytes32 messageDataHash,
        uint256 baseFeeL1,
        uint64 timestamp
    );
    event BridgeCallTriggered(
        address indexed outbox,
        address indexed to,
        uint256 value,
        bytes data
    );
    event InboxToggle(address indexed inbox, bool enabled);
    event OutboxToggle(address indexed outbox, bool enabled);
    event SequencerInboxUpdated(address newSequencerInbox);
    function allowedDelayedInboxList(uint256) external returns (address);
    function allowedOutboxList(uint256) external returns (address);
    /// @dev Accumulator for delayed inbox messages; tail represents hash of the current state; each element represents the inclusion of a new message.
    function delayedInboxAccs(uint256) external view returns (bytes32);
    /// @dev Accumulator for sequencer inbox messages; tail represents hash of the current state; each element represents the inclusion of a new message.
    function sequencerInboxAccs(uint256) external view returns (bytes32);
    function rollup() external view returns (IOwnable);
    function sequencerInbox() external view returns (address);
    function activeOutbox() external view returns (address);
    function allowedDelayedInboxes(address inbox) external view returns (bool);
    function allowedOutboxes(address outbox) external view returns (bool);
    /**
     * @dev Enqueue a message in the delayed inbox accumulator.
     *      These messages are later sequenced in the SequencerInbox, either
     *      by the sequencer as part of a normal batch, or by force inclusion.
     */
    function enqueueDelayedMessage(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) external payable returns (uint256);
    function executeCall(
        address to,
        uint256 value,
        bytes calldata data
    ) external returns (bool success, bytes memory returnData);
    function delayedMessageCount() external view returns (uint256);
    function sequencerMessageCount() external view returns (uint256);
    // ---------- onlySequencerInbox functions ----------
    function enqueueSequencerMessage(bytes32 dataHash, uint256 afterDelayedMessagesRead)
        external
        returns (
            uint256 seqMessageIndex,
            bytes32 beforeAcc,
            bytes32 delayedAcc,
            bytes32 acc
        );
    /**
     * @dev Allows the sequencer inbox to submit a delayed message of the batchPostingReport type
     *      This is done through a separate function entrypoint instead of allowing the sequencer inbox
     *      to call `enqueueDelayedMessage` to avoid the gas overhead of an extra SLOAD in either
     *      every delayed inbox or every sequencer inbox call.
     */
    function submitBatchSpendingReport(address batchPoster, bytes32 dataHash)
        external
        returns (uint256 msgNum);
    // ---------- onlyRollupOrOwner functions ----------
    function setSequencerInbox(address _sequencerInbox) external;
    function setDelayedInbox(address inbox, bool enabled) external;
    function setOutbox(address inbox, bool enabled) external;
    // ---------- initializer ----------
    function initialize(IOwnable rollup_) external;
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library Messages {
    function messageHash(
        uint8 kind,
        address sender,
        uint64 blockNumber,
        uint64 timestamp,
        uint256 inboxSeqNum,
        uint256 baseFeeL1,
        bytes32 messageDataHash
    ) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    kind,
                    sender,
                    blockNumber,
                    timestamp,
                    inboxSeqNum,
                    baseFeeL1,
                    messageDataHash
                )
            );
    }
    function accumulateInboxMessage(bytes32 prevAcc, bytes32 message)
        internal
        pure
        returns (bytes32)
    {
        return keccak256(abi.encodePacked(prevAcc, message));
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library AddressAliasHelper {
    uint160 internal constant OFFSET = uint160(0x1111000000000000000000000000000000001111);
    /// @notice Utility function that converts the address in the L1 that submitted a tx to
    /// the inbox to the msg.sender viewed in the L2
    /// @param l1Address the address in the L1 that triggered the tx to L2
    /// @return l2Address L2 address as viewed in msg.sender
    function applyL1ToL2Alias(address l1Address) internal pure returns (address l2Address) {
        unchecked {
            l2Address = address(uint160(l1Address) + OFFSET);
        }
    }
    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l2Address L2 address as viewed in msg.sender
    /// @return l1Address the address in the L1 that triggered the tx to L2
    function undoL1ToL2Alias(address l2Address) internal pure returns (address l1Address) {
        unchecked {
            l1Address = address(uint160(l2Address) - OFFSET);
        }
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {NotOwner} from "./Error.sol";
/// @dev A stateless contract that allows you to infer if the current call has been delegated or not
/// Pattern used here is from UUPS implementation by the OpenZeppelin team
abstract contract DelegateCallAware {
    address private immutable __self = address(this);
    /**
     * @dev Check that the execution is being performed through a delegate call. This allows a function to be
     * callable on the proxy contract but not on the logic contract.
     */
    modifier onlyDelegated() {
        require(address(this) != __self, "Function must be called through delegatecall");
        _;
    }
    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        require(address(this) == __self, "Function must not be called through delegatecall");
        _;
    }
    /// @dev Check that msg.sender is the current EIP 1967 proxy admin
    modifier onlyProxyOwner() {
        // Storage slot with the admin of the proxy contract
        // This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1
        bytes32 slot = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
        address admin;
        assembly {
            admin := sload(slot)
        }
        if (msg.sender != admin) revert NotOwner(msg.sender, admin);
        _;
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
uint8 constant L2_MSG = 3;
uint8 constant L1MessageType_L2FundedByL1 = 7;
uint8 constant L1MessageType_submitRetryableTx = 9;
uint8 constant L1MessageType_ethDeposit = 12;
uint8 constant L1MessageType_batchPostingReport = 13;
uint8 constant L2MessageType_unsignedEOATx = 0;
uint8 constant L2MessageType_unsignedContractTx = 1;
uint8 constant ROLLUP_PROTOCOL_EVENT_TYPE = 8;
uint8 constant INITIALIZATION_MSG_TYPE = 11;
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
// 90% of Geth's 128KB tx size limit, leaving ~13KB for proving
uint256 constant MAX_DATA_SIZE = 117964;
uint64 constant NO_CHAL_INDEX = 0;
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }
    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;
interface IDelayedMessageProvider {
    /// @dev event emitted when a inbox message is added to the Bridge's delayed accumulator
    event InboxMessageDelivered(uint256 indexed messageNum, bytes data);
    /// @dev event emitted when a inbox message is added to the Bridge's delayed accumulator
    /// same as InboxMessageDelivered but the batch data is available in tx.input
    event InboxMessageDeliveredFromOrigin(uint256 indexed messageNum);
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.4.21 <0.9.0;
interface IOwnable {
    function owner() external view returns (address);
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;
interface IGasRefunder {
    function onGasSpent(
        address payable spender,
        uint256 gasUsed,
        uint256 calldataSize
    ) external returns (bool success);
}
abstract contract GasRefundEnabled {
    /// @dev this refunds the sender for execution costs of the tx
    /// calldata costs are only refunded if `msg.sender == tx.origin` to guarantee the value refunded relates to charging
    /// for the `tx.input`. this avoids a possible attack where you generate large calldata from a contract and get over-refunded
    modifier refundsGas(IGasRefunder gasRefunder) {
        uint256 startGasLeft = gasleft();
        _;
        if (address(gasRefunder) != address(0)) {
            uint256 calldataSize = 0;
            // if triggered in a contract call, the spender may be overrefunded by appending dummy data to the call
            // so we check if it is a top level call, which would mean the sender paid calldata as part of tx.input
            // solhint-disable-next-line avoid-tx-origin
            if (msg.sender == tx.origin) {
                assembly {
                    calldataSize := calldatasize()
                }
            }
            gasRefunder.onGasSpent(payable(msg.sender), startGasLeft - gasleft(), calldataSize);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
        // contract may have been reentered.
        require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
        }
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} modifier, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import {
    NotContract,
    NotRollupOrOwner,
    NotDelayedInbox,
    NotSequencerInbox,
    NotOutbox,
    InvalidOutboxSet,
    BadSequencerMessageNumber
} from "../libraries/Error.sol";
import "./IBridge.sol";
import "./Messages.sol";
import "../libraries/DelegateCallAware.sol";
import {L1MessageType_batchPostingReport} from "../libraries/MessageTypes.sol";
/**
 * @title Staging ground for incoming and outgoing messages
 * @notice Holds the inbox accumulator for sequenced and delayed messages.
 * It is also the ETH escrow for value sent with these messages.
 * Since the escrow is held here, this contract also contains a list of allowed
 * outboxes that can make calls from here and withdraw this escrow.
 */
contract Bridge is Initializable, DelegateCallAware, IBridge {
    using AddressUpgradeable for address;
    struct InOutInfo {
        uint256 index;
        bool allowed;
    }
    mapping(address => InOutInfo) private allowedDelayedInboxesMap;
    mapping(address => InOutInfo) private allowedOutboxesMap;
    address[] public allowedDelayedInboxList;
    address[] public allowedOutboxList;
    address private _activeOutbox;
    /// @inheritdoc IBridge
    bytes32[] public delayedInboxAccs;
    /// @inheritdoc IBridge
    bytes32[] public sequencerInboxAccs;
    IOwnable public rollup;
    address public sequencerInbox;
    uint256 public override sequencerReportedSubMessageCount;
    address private constant EMPTY_ACTIVEOUTBOX = address(type(uint160).max);
    function initialize(IOwnable rollup_) external initializer onlyDelegated {
        _activeOutbox = EMPTY_ACTIVEOUTBOX;
        rollup = rollup_;
    }
    modifier onlyRollupOrOwner() {
        if (msg.sender != address(rollup)) {
            address rollupOwner = rollup.owner();
            if (msg.sender != rollupOwner) {
                revert NotRollupOrOwner(msg.sender, address(rollup), rollupOwner);
            }
        }
        _;
    }
    /// @dev returns the address of current active Outbox, or zero if no outbox is active
    function activeOutbox() public view returns (address) {
        address outbox = _activeOutbox;
        // address zero is returned if no outbox is set, but the value used in storage
        // is non-zero to save users some gas (as storage refunds are usually maxed out)
        // EIP-1153 would help here.
        // we don't return `EMPTY_ACTIVEOUTBOX` to avoid a breaking change on the current api
        if (outbox == EMPTY_ACTIVEOUTBOX) return address(0);
        return outbox;
    }
    function allowedDelayedInboxes(address inbox) external view returns (bool) {
        return allowedDelayedInboxesMap[inbox].allowed;
    }
    function allowedOutboxes(address outbox) external view returns (bool) {
        return allowedOutboxesMap[outbox].allowed;
    }
    modifier onlySequencerInbox() {
        if (msg.sender != sequencerInbox) revert NotSequencerInbox(msg.sender);
        _;
    }
    function enqueueSequencerMessage(
        bytes32 dataHash,
        uint256 afterDelayedMessagesRead,
        uint256 prevMessageCount,
        uint256 newMessageCount
    )
        external
        onlySequencerInbox
        returns (
            uint256 seqMessageIndex,
            bytes32 beforeAcc,
            bytes32 delayedAcc,
            bytes32 acc
        )
    {
        if (
            sequencerReportedSubMessageCount != prevMessageCount &&
            prevMessageCount != 0 &&
            sequencerReportedSubMessageCount != 0
        ) {
            revert BadSequencerMessageNumber(sequencerReportedSubMessageCount, prevMessageCount);
        }
        sequencerReportedSubMessageCount = newMessageCount;
        seqMessageIndex = sequencerInboxAccs.length;
        if (sequencerInboxAccs.length > 0) {
            beforeAcc = sequencerInboxAccs[sequencerInboxAccs.length - 1];
        }
        if (afterDelayedMessagesRead > 0) {
            delayedAcc = delayedInboxAccs[afterDelayedMessagesRead - 1];
        }
        acc = keccak256(abi.encodePacked(beforeAcc, dataHash, delayedAcc));
        sequencerInboxAccs.push(acc);
    }
    /// @inheritdoc IBridge
    function submitBatchSpendingReport(address sender, bytes32 messageDataHash)
        external
        onlySequencerInbox
        returns (uint256)
    {
        return
            addMessageToDelayedAccumulator(
                L1MessageType_batchPostingReport,
                sender,
                uint64(block.number),
                uint64(block.timestamp), // solhint-disable-line not-rely-on-time,
                block.basefee,
                messageDataHash
            );
    }
    /// @inheritdoc IBridge
    function enqueueDelayedMessage(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) external payable returns (uint256) {
        if (!allowedDelayedInboxesMap[msg.sender].allowed) revert NotDelayedInbox(msg.sender);
        return
            addMessageToDelayedAccumulator(
                kind,
                sender,
                uint64(block.number),
                uint64(block.timestamp), // solhint-disable-line not-rely-on-time
                block.basefee,
                messageDataHash
            );
    }
    function addMessageToDelayedAccumulator(
        uint8 kind,
        address sender,
        uint64 blockNumber,
        uint64 blockTimestamp,
        uint256 baseFeeL1,
        bytes32 messageDataHash
    ) internal returns (uint256) {
        uint256 count = delayedInboxAccs.length;
        bytes32 messageHash = Messages.messageHash(
            kind,
            sender,
            blockNumber,
            blockTimestamp,
            count,
            baseFeeL1,
            messageDataHash
        );
        bytes32 prevAcc = 0;
        if (count > 0) {
            prevAcc = delayedInboxAccs[count - 1];
        }
        delayedInboxAccs.push(Messages.accumulateInboxMessage(prevAcc, messageHash));
        emit MessageDelivered(
            count,
            prevAcc,
            msg.sender,
            kind,
            sender,
            messageDataHash,
            baseFeeL1,
            blockTimestamp
        );
        return count;
    }
    function executeCall(
        address to,
        uint256 value,
        bytes calldata data
    ) external returns (bool success, bytes memory returnData) {
        if (!allowedOutboxesMap[msg.sender].allowed) revert NotOutbox(msg.sender);
        if (data.length > 0 && !to.isContract()) revert NotContract(to);
        address prevOutbox = _activeOutbox;
        _activeOutbox = msg.sender;
        // We set and reset active outbox around external call so activeOutbox remains valid during call
        // We use a low level call here since we want to bubble up whether it succeeded or failed to the caller
        // rather than reverting on failure as well as allow contract and non-contract calls
        // solhint-disable-next-line avoid-low-level-calls
        (success, returnData) = to.call{value: value}(data);
        _activeOutbox = prevOutbox;
        emit BridgeCallTriggered(msg.sender, to, value, data);
    }
    function setSequencerInbox(address _sequencerInbox) external onlyRollupOrOwner {
        sequencerInbox = _sequencerInbox;
        emit SequencerInboxUpdated(_sequencerInbox);
    }
    function setDelayedInbox(address inbox, bool enabled) external onlyRollupOrOwner {
        InOutInfo storage info = allowedDelayedInboxesMap[inbox];
        bool alreadyEnabled = info.allowed;
        emit InboxToggle(inbox, enabled);
        if ((alreadyEnabled && enabled) || (!alreadyEnabled && !enabled)) {
            return;
        }
        if (enabled) {
            allowedDelayedInboxesMap[inbox] = InOutInfo(allowedDelayedInboxList.length, true);
            allowedDelayedInboxList.push(inbox);
        } else {
            allowedDelayedInboxList[info.index] = allowedDelayedInboxList[
                allowedDelayedInboxList.length - 1
            ];
            allowedDelayedInboxesMap[allowedDelayedInboxList[info.index]].index = info.index;
            allowedDelayedInboxList.pop();
            delete allowedDelayedInboxesMap[inbox];
        }
    }
    function setOutbox(address outbox, bool enabled) external onlyRollupOrOwner {
        if (outbox == EMPTY_ACTIVEOUTBOX) revert InvalidOutboxSet(outbox);
        InOutInfo storage info = allowedOutboxesMap[outbox];
        bool alreadyEnabled = info.allowed;
        emit OutboxToggle(outbox, enabled);
        if ((alreadyEnabled && enabled) || (!alreadyEnabled && !enabled)) {
            return;
        }
        if (enabled) {
            allowedOutboxesMap[outbox] = InOutInfo(allowedOutboxList.length, true);
            allowedOutboxList.push(outbox);
        } else {
            allowedOutboxList[info.index] = allowedOutboxList[allowedOutboxList.length - 1];
            allowedOutboxesMap[allowedOutboxList[info.index]].index = info.index;
            allowedOutboxList.pop();
            delete allowedOutboxesMap[outbox];
        }
    }
    function setSequencerReportedSubMessageCount(uint256 newMsgCount) external onlyRollupOrOwner {
        sequencerReportedSubMessageCount = newMsgCount;
    }
    function delayedMessageCount() external view override returns (uint256) {
        return delayedInboxAccs.length;
    }
    function sequencerMessageCount() external view returns (uint256) {
        return sequencerInboxAccs.length;
    }
    /// @dev For the classic -> nitro migration. TODO: remove post-migration.
    function acceptFundsFromOldBridge() external payable {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
        // contract may have been reentered.
        require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
        }
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} modifier, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
/// @dev Init was already called
error AlreadyInit();
/// Init was called with param set to zero that must be nonzero
error HadZeroInit();
/// @dev Thrown when non owner tries to access an only-owner function
/// @param sender The msg.sender who is not the owner
/// @param owner The owner address
error NotOwner(address sender, address owner);
/// @dev Thrown when an address that is not the rollup tries to call an only-rollup function
/// @param sender The sender who is not the rollup
/// @param rollup The rollup address authorized to call this function
error NotRollup(address sender, address rollup);
/// @dev Thrown when the contract was not called directly from the origin ie msg.sender != tx.origin
error NotOrigin();
/// @dev Provided data was too large
/// @param dataLength The length of the data that is too large
/// @param maxDataLength The max length the data can be
error DataTooLarge(uint256 dataLength, uint256 maxDataLength);
/// @dev The provided is not a contract and was expected to be
/// @param addr The adddress in question
error NotContract(address addr);
/// @dev The merkle proof provided was too long
/// @param actualLength The length of the merkle proof provided
/// @param maxProofLength The max length a merkle proof can have
error MerkleProofTooLong(uint256 actualLength, uint256 maxProofLength);
/// @dev Thrown when an un-authorized address tries to access an admin function
/// @param sender The un-authorized sender
/// @param rollup The rollup, which would be authorized
/// @param owner The rollup's owner, which would be authorized
error NotRollupOrOwner(address sender, address rollup, address owner);
// Bridge Errors
/// @dev Thrown when an un-authorized address tries to access an only-inbox function
/// @param sender The un-authorized sender
error NotDelayedInbox(address sender);
/// @dev Thrown when an un-authorized address tries to access an only-sequencer-inbox function
/// @param sender The un-authorized sender
error NotSequencerInbox(address sender);
/// @dev Thrown when an un-authorized address tries to access an only-outbox function
/// @param sender The un-authorized sender
error NotOutbox(address sender);
/// @dev the provided outbox address isn't valid
/// @param outbox address of outbox being set
error InvalidOutboxSet(address outbox);
// Inbox Errors
/// @dev The contract is paused, so cannot be paused
error AlreadyPaused();
/// @dev The contract is unpaused, so cannot be unpaused
error AlreadyUnpaused();
/// @dev The contract is paused
error Paused();
/// @dev msg.value sent to the inbox isn't high enough
error InsufficientValue(uint256 expected, uint256 actual);
/// @dev submission cost provided isn't enough to create retryable ticket
error InsufficientSubmissionCost(uint256 expected, uint256 actual);
/// @dev address not allowed to interact with the given contract
error NotAllowedOrigin(address origin);
/// @dev used to convey retryable tx data in eth calls without requiring a tx trace
/// this follows a pattern similar to EIP-3668 where reverts surface call information
error RetryableData(
    address from,
    address to,
    uint256 l2CallValue,
    uint256 deposit,
    uint256 maxSubmissionCost,
    address excessFeeRefundAddress,
    address callValueRefundAddress,
    uint256 gasLimit,
    uint256 maxFeePerGas,
    bytes data
);
// Outbox Errors
/// @dev The provided proof was too long
/// @param proofLength The length of the too-long proof
error ProofTooLong(uint256 proofLength);
/// @dev The output index was greater than the maximum
/// @param index The output index
/// @param maxIndex The max the index could be
error PathNotMinimal(uint256 index, uint256 maxIndex);
/// @dev The calculated root does not exist
/// @param root The calculated root
error UnknownRoot(bytes32 root);
/// @dev The record has already been spent
/// @param index The index of the spent record
error AlreadySpent(uint256 index);
/// @dev A call to the bridge failed with no return data
error BridgeCallFailed();
// Sequencer Inbox Errors
/// @dev Thrown when someone attempts to read fewer messages than have already been read
error DelayedBackwards();
/// @dev Thrown when someone attempts to read more messages than exist
error DelayedTooFar();
/// @dev Force include can only read messages more blocks old than the delay period
error ForceIncludeBlockTooSoon();
/// @dev Force include can only read messages more seconds old than the delay period
error ForceIncludeTimeTooSoon();
/// @dev The message provided did not match the hash in the delayed inbox
error IncorrectMessagePreimage();
/// @dev This can only be called by the batch poster
error NotBatchPoster();
/// @dev The sequence number provided to this message was inconsistent with the number of batches already included
error BadSequencerNumber(uint256 stored, uint256 received);
/// @dev The sequence message number provided to this message was inconsistent with the previous one
error BadSequencerMessageNumber(uint256 stored, uint256 received);
/// @dev The batch data has the inbox authenticated bit set, but the batch data was not authenticated by the inbox
error DataNotAuthenticated();
/// @dev Tried to create an already valid Data Availability Service keyset
error AlreadyValidDASKeyset(bytes32);
/// @dev Tried to use or invalidate an already invalid Data Availability Service keyset
error NoSuchKeyset(bytes32);
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.6.9 <0.9.0;
import "./IOwnable.sol";
interface IBridge {
    event MessageDelivered(
        uint256 indexed messageIndex,
        bytes32 indexed beforeInboxAcc,
        address inbox,
        uint8 kind,
        address sender,
        bytes32 messageDataHash,
        uint256 baseFeeL1,
        uint64 timestamp
    );
    event BridgeCallTriggered(
        address indexed outbox,
        address indexed to,
        uint256 value,
        bytes data
    );
    event InboxToggle(address indexed inbox, bool enabled);
    event OutboxToggle(address indexed outbox, bool enabled);
    event SequencerInboxUpdated(address newSequencerInbox);
    function allowedDelayedInboxList(uint256) external returns (address);
    function allowedOutboxList(uint256) external returns (address);
    /// @dev Accumulator for delayed inbox messages; tail represents hash of the current state; each element represents the inclusion of a new message.
    function delayedInboxAccs(uint256) external view returns (bytes32);
    /// @dev Accumulator for sequencer inbox messages; tail represents hash of the current state; each element represents the inclusion of a new message.
    function sequencerInboxAccs(uint256) external view returns (bytes32);
    function rollup() external view returns (IOwnable);
    function sequencerInbox() external view returns (address);
    function activeOutbox() external view returns (address);
    function allowedDelayedInboxes(address inbox) external view returns (bool);
    function allowedOutboxes(address outbox) external view returns (bool);
    function sequencerReportedSubMessageCount() external view returns (uint256);
    /**
     * @dev Enqueue a message in the delayed inbox accumulator.
     *      These messages are later sequenced in the SequencerInbox, either
     *      by the sequencer as part of a normal batch, or by force inclusion.
     */
    function enqueueDelayedMessage(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) external payable returns (uint256);
    function executeCall(
        address to,
        uint256 value,
        bytes calldata data
    ) external returns (bool success, bytes memory returnData);
    function delayedMessageCount() external view returns (uint256);
    function sequencerMessageCount() external view returns (uint256);
    // ---------- onlySequencerInbox functions ----------
    function enqueueSequencerMessage(
        bytes32 dataHash,
        uint256 afterDelayedMessagesRead,
        uint256 prevMessageCount,
        uint256 newMessageCount
    )
        external
        returns (
            uint256 seqMessageIndex,
            bytes32 beforeAcc,
            bytes32 delayedAcc,
            bytes32 acc
        );
    /**
     * @dev Allows the sequencer inbox to submit a delayed message of the batchPostingReport type
     *      This is done through a separate function entrypoint instead of allowing the sequencer inbox
     *      to call `enqueueDelayedMessage` to avoid the gas overhead of an extra SLOAD in either
     *      every delayed inbox or every sequencer inbox call.
     */
    function submitBatchSpendingReport(address batchPoster, bytes32 dataHash)
        external
        returns (uint256 msgNum);
    // ---------- onlyRollupOrOwner functions ----------
    function setSequencerInbox(address _sequencerInbox) external;
    function setDelayedInbox(address inbox, bool enabled) external;
    function setOutbox(address inbox, bool enabled) external;
    // ---------- initializer ----------
    function initialize(IOwnable rollup_) external;
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library Messages {
    function messageHash(
        uint8 kind,
        address sender,
        uint64 blockNumber,
        uint64 timestamp,
        uint256 inboxSeqNum,
        uint256 baseFeeL1,
        bytes32 messageDataHash
    ) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    kind,
                    sender,
                    blockNumber,
                    timestamp,
                    inboxSeqNum,
                    baseFeeL1,
                    messageDataHash
                )
            );
    }
    function accumulateInboxMessage(bytes32 prevAcc, bytes32 message)
        internal
        pure
        returns (bytes32)
    {
        return keccak256(abi.encodePacked(prevAcc, message));
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {NotOwner} from "./Error.sol";
/// @dev A stateless contract that allows you to infer if the current call has been delegated or not
/// Pattern used here is from UUPS implementation by the OpenZeppelin team
abstract contract DelegateCallAware {
    address private immutable __self = address(this);
    /**
     * @dev Check that the execution is being performed through a delegate call. This allows a function to be
     * callable on the proxy contract but not on the logic contract.
     */
    modifier onlyDelegated() {
        require(address(this) != __self, "Function must be called through delegatecall");
        _;
    }
    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        require(address(this) == __self, "Function must not be called through delegatecall");
        _;
    }
    /// @dev Check that msg.sender is the current EIP 1967 proxy admin
    modifier onlyProxyOwner() {
        // Storage slot with the admin of the proxy contract
        // This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1
        bytes32 slot = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
        address admin;
        assembly {
            admin := sload(slot)
        }
        if (msg.sender != admin) revert NotOwner(msg.sender, admin);
        _;
    }
}
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;
uint8 constant L2_MSG = 3;
uint8 constant L1MessageType_L2FundedByL1 = 7;
uint8 constant L1MessageType_submitRetryableTx = 9;
uint8 constant L1MessageType_ethDeposit = 12;
uint8 constant L1MessageType_batchPostingReport = 13;
uint8 constant L2MessageType_unsignedEOATx = 0;
uint8 constant L2MessageType_unsignedContractTx = 1;
uint8 constant ROLLUP_PROTOCOL_EVENT_TYPE = 8;
uint8 constant INITIALIZATION_MSG_TYPE = 11;
// Copyright 2021-2022, Offchain Labs, Inc.
// For license information, see https://github.com/nitro/blob/master/LICENSE
// SPDX-License-Identifier: BUSL-1.1
// solhint-disable-next-line compiler-version
pragma solidity >=0.4.21 <0.9.0;
interface IOwnable {
    function owner() external view returns (address);
}