// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.0;

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)

pragma solidity ^0.8.2;

// import "../beacon/IBeacon.sol";
// import "../../interfaces/draft-IERC1822.sol";
// import "../../utils/Address.sol";
// import "../../utils/StorageSlot.sol";

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data, bool forceCall) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}

// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)

pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overridden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}

// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.0;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// OpenZeppelin Contracts (last updated v4.7.0) (proxy/beacon/BeaconProxy.sol)

pragma solidity ^0.8.0;

// import "./IBeacon.sol";
// import "../Proxy.sol";
// import "../ERC1967/ERC1967Upgrade.sol";

/**
 * @dev This contract implements a proxy that gets the implementation address for each call from an {UpgradeableBeacon}.
 *
 * The beacon address is stored in storage slot `uint256(keccak256('eip1967.proxy.beacon')) - 1`, so that it doesn't
 * conflict with the storage layout of the implementation behind the proxy.
 *
 * _Available since v3.4._
 */
contract BeaconProxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the proxy with `beacon`.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon. This
     * will typically be an encoded function call, and allows initializing the storage of the proxy like a Solidity
     * constructor.
     *
     * Requirements:
     *
     * - `beacon` must be a contract with the interface {IBeacon}.
     */
    constructor(address beacon, bytes memory data) payable {
        _upgradeBeaconToAndCall(beacon, data, false);
    }

    /**
     * @dev Returns the current beacon address.
     */
    function _beacon() internal view virtual returns (address) {
        return _getBeacon();
    }

    /**
     * @dev Returns the current implementation address of the associated beacon.
     */
    function _implementation() internal view virtual override returns (address) {
        return IBeacon(_getBeacon()).implementation();
    }

    /**
     * @dev Changes the proxy to use a new beacon. Deprecated: see {_upgradeBeaconToAndCall}.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon.
     *
     * Requirements:
     *
     * - `beacon` must be a contract.
     * - The implementation returned by `beacon` must be a contract.
     */
    function _setBeacon(address beacon, bytes memory data) internal virtual {
        _upgradeBeaconToAndCall(beacon, data, false);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/UpgradeableBeacon.sol)
pragma solidity ^0.8.0;
import "./IBeacon.sol";
import "../../access/Ownable.sol";
import "../../utils/Address.sol";
/**
 * @dev This contract is used in conjunction with one or more instances of {BeaconProxy} to determine their
 * implementation contract, which is where they will delegate all function calls.
 *
 * An owner is able to change the implementation the beacon points to, thus upgrading the proxies that use this beacon.
 */
contract UpgradeableBeacon is IBeacon, Ownable {
    address private _implementation;
    /**
     * @dev Emitted when the implementation returned by the beacon is changed.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Sets the address of the initial implementation, and the deployer account as the owner who can upgrade the
     * beacon.
     */
    constructor(address implementation_) {
        _setImplementation(implementation_);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function implementation() public view virtual override returns (address) {
        return _implementation;
    }
    /**
     * @dev Upgrades the beacon to a new implementation.
     *
     * Emits an {Upgraded} event.
     *
     * Requirements:
     *
     * - msg.sender must be the owner of the contract.
     * - `newImplementation` must be a contract.
     */
    function upgradeTo(address newImplementation) public virtual onlyOwner {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Sets the implementation contract address for this beacon
     *
     * Requirements:
     *
     * - `newImplementation` must be a contract.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableBeacon: implementation is not a contract");
        _implementation = newImplementation;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
import "@openzeppelin-upgrades/contracts/proxy/utils/Initializable.sol";
import "@openzeppelin-upgrades/contracts/security/ReentrancyGuardUpgradeable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "../libraries/BeaconChainProofs.sol";
import "../libraries/BytesLib.sol";
import "../interfaces/IETHPOSDeposit.sol";
import "../interfaces/IEigenPodManager.sol";
import "../interfaces/IPausable.sol";
import "./EigenPodPausingConstants.sol";
import "./EigenPodStorage.sol";
/**
 * @title The implementation contract used for restaking beacon chain ETH on EigenLayer
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice This EigenPod Beacon Proxy implementation adheres to the current Deneb consensus specs
 * @dev Note that all beacon chain balances are stored as gwei within the beacon chain datastructures. We choose
 *   to account balances in terms of gwei in the EigenPod contract and convert to wei when making calls to other contracts
 */
contract EigenPod is Initializable, ReentrancyGuardUpgradeable, EigenPodPausingConstants, EigenPodStorage {
    using BytesLib for bytes;
    using SafeERC20 for IERC20;
    using BeaconChainProofs for *;
    /**
     *
     *                            CONSTANTS / IMMUTABLES
     *
     */
    /// @notice The beacon chain stores balances in Gwei, rather than wei. This value is used to convert between the two
    uint256 internal constant GWEI_TO_WEI = 1e9;
    /// @notice The address of the EIP-4788 beacon block root oracle
    /// (See https://eips.ethereum.org/EIPS/eip-4788)
    address internal constant BEACON_ROOTS_ADDRESS = 0x000F3df6D732807Ef1319fB7B8bB8522d0Beac02;
    /// @notice The length of the EIP-4788 beacon block root ring buffer
    uint256 internal constant BEACON_ROOTS_HISTORY_BUFFER_LENGTH = 8191;
    /// @notice The beacon chain deposit contract
    IETHPOSDeposit public immutable ethPOS;
    /// @notice The single EigenPodManager for EigenLayer
    IEigenPodManager public immutable eigenPodManager;
    /// @notice This is the genesis time of the beacon state, to help us calculate conversions between slot and timestamp
    uint64 public immutable GENESIS_TIME;
    /**
     *
     *                                  MODIFIERS
     *
     */
    /// @notice Callable only by the EigenPodManager
    modifier onlyEigenPodManager() {
        require(msg.sender == address(eigenPodManager), "EigenPod.onlyEigenPodManager: not eigenPodManager");
        _;
    }
    /// @notice Callable only by the pod's owner
    modifier onlyEigenPodOwner() {
        require(msg.sender == podOwner, "EigenPod.onlyEigenPodOwner: not podOwner");
        _;
    }
    /// @notice Callable only by the pod's owner or proof submitter
    modifier onlyOwnerOrProofSubmitter() {
        require(
            msg.sender == podOwner || msg.sender == proofSubmitter,
            "EigenPod.onlyOwnerOrProofSubmitter: caller is not pod owner or proof submitter"
        );
        _;
    }
    /**
     * @notice Based on 'Pausable' code, but uses the storage of the EigenPodManager instead of this contract. This construction
     * is necessary for enabling pausing all EigenPods at the same time (due to EigenPods being Beacon Proxies).
     * Modifier throws if the `indexed`th bit of `_paused` in the EigenPodManager is 1, i.e. if the `index`th pause switch is flipped.
     */
    modifier onlyWhenNotPaused(uint8 index) {
        require(
            !IPausable(address(eigenPodManager)).paused(index),
            "EigenPod.onlyWhenNotPaused: index is paused in EigenPodManager"
        );
        _;
    }
    /**
     *
     *                               CONSTRUCTOR / INIT
     *
     */
    constructor(IETHPOSDeposit _ethPOS, IEigenPodManager _eigenPodManager, uint64 _GENESIS_TIME) {
        ethPOS = _ethPOS;
        eigenPodManager = _eigenPodManager;
        GENESIS_TIME = _GENESIS_TIME;
        _disableInitializers();
    }
    /// @notice Used to initialize the pointers to addresses crucial to the pod's functionality. Called on construction by the EigenPodManager.
    function initialize(address _podOwner) external initializer {
        require(_podOwner != address(0), "EigenPod.initialize: podOwner cannot be zero address");
        podOwner = _podOwner;
    }
    /**
     *
     *                                 EXTERNAL METHODS
     *
     */
    /// @notice payable fallback function that receives ether deposited to the eigenpods contract
    receive() external payable {
        emit NonBeaconChainETHReceived(msg.value);
    }
    /**
     * @dev Create a checkpoint used to prove this pod's active validator set. Checkpoints are completed
     * by submitting one checkpoint proof per ACTIVE validator. During the checkpoint process, the total
     * change in ACTIVE validator balance is tracked, and any validators with 0 balance are marked `WITHDRAWN`.
     * @dev Once finalized, the pod owner is awarded shares corresponding to:
     * - the total change in their ACTIVE validator balances
     * - any ETH in the pod not already awarded shares
     * @dev A checkpoint cannot be created if the pod already has an outstanding checkpoint. If
     * this is the case, the pod owner MUST complete the existing checkpoint before starting a new one.
     * @param revertIfNoBalance Forces a revert if the pod ETH balance is 0. This allows the pod owner
     * to prevent accidentally starting a checkpoint that will not increase their shares
     */
    function startCheckpoint(bool revertIfNoBalance)
        external
        onlyOwnerOrProofSubmitter
        onlyWhenNotPaused(PAUSED_START_CHECKPOINT)
    {
        _startCheckpoint(revertIfNoBalance);
    }
    /**
     * @dev Progress the current checkpoint towards completion by submitting one or more validator
     * checkpoint proofs. Anyone can call this method to submit proofs towards the current checkpoint.
     * For each validator proven, the current checkpoint's `proofsRemaining` decreases.
     * @dev If the checkpoint's `proofsRemaining` reaches 0, the checkpoint is finalized.
     * (see `_updateCheckpoint` for more details)
     * @dev This method can only be called when there is a currently-active checkpoint.
     * @param balanceContainerProof proves the beacon's current balance container root against a checkpoint's `beaconBlockRoot`
     * @param proofs Proofs for one or more validator current balances against the `balanceContainerRoot`
     */
    function verifyCheckpointProofs(
        BeaconChainProofs.BalanceContainerProof calldata balanceContainerProof,
        BeaconChainProofs.BalanceProof[] calldata proofs
    ) external onlyWhenNotPaused(PAUSED_EIGENPODS_VERIFY_CHECKPOINT_PROOFS) {
        uint64 checkpointTimestamp = currentCheckpointTimestamp;
        require(
            checkpointTimestamp != 0,
            "EigenPod.verifyCheckpointProofs: must have active checkpoint to perform checkpoint proof"
        );
        Checkpoint memory checkpoint = _currentCheckpoint;
        // Verify `balanceContainerProof` against `beaconBlockRoot`
        BeaconChainProofs.verifyBalanceContainer({
            beaconBlockRoot: checkpoint.beaconBlockRoot,
            proof: balanceContainerProof
        });
        // Process each checkpoint proof submitted
        uint64 exitedBalancesGwei;
        for (uint256 i = 0; i < proofs.length; i++) {
            BeaconChainProofs.BalanceProof calldata proof = proofs[i];
            ValidatorInfo memory validatorInfo = _validatorPubkeyHashToInfo[proof.pubkeyHash];
            // Validator must be in the ACTIVE state to be provable during a checkpoint.
            // Validators become ACTIVE when initially proven via verifyWithdrawalCredentials
            // Validators become WITHDRAWN when a checkpoint proof shows they have 0 balance
            if (validatorInfo.status != VALIDATOR_STATUS.ACTIVE) {
                continue;
            }
            // Ensure we aren't proving a validator twice for the same checkpoint. This will fail if:
            // - validator submitted twice during this checkpoint
            // - validator withdrawal credentials verified after checkpoint starts, then submitted
            //   as a checkpoint proof
            if (validatorInfo.lastCheckpointedAt >= checkpointTimestamp) {
                continue;
            }
            // Process a checkpoint proof for a validator and update its balance.
            //
            // If the proof shows the validator has a balance of 0, they are marked `WITHDRAWN`.
            // The assumption is that if this is the case, any withdrawn ETH was already in
            // the pod when `startCheckpoint` was originally called.
            (int128 balanceDeltaGwei, uint64 exitedBalanceGwei) = _verifyCheckpointProof({
                validatorInfo: validatorInfo,
                checkpointTimestamp: checkpointTimestamp,
                balanceContainerRoot: balanceContainerProof.balanceContainerRoot,
                proof: proof
            });
            checkpoint.proofsRemaining--;
            checkpoint.balanceDeltasGwei += balanceDeltaGwei;
            exitedBalancesGwei += exitedBalanceGwei;
            // Record the updated validator in state
            _validatorPubkeyHashToInfo[proof.pubkeyHash] = validatorInfo;
            emit ValidatorCheckpointed(checkpointTimestamp, uint40(validatorInfo.validatorIndex));
        }
        // Update the checkpoint and the total amount attributed to exited validators
        checkpointBalanceExitedGwei[checkpointTimestamp] += exitedBalancesGwei;
        _updateCheckpoint(checkpoint);
    }
    /**
     * @dev Verify one or more validators have their withdrawal credentials pointed at this EigenPod, and award
     * shares based on their effective balance. Proven validators are marked `ACTIVE` within the EigenPod, and
     * future checkpoint proofs will need to include them.
     * @dev Withdrawal credential proofs MUST NOT be older than `currentCheckpointTimestamp`.
     * @dev Validators proven via this method MUST NOT have an exit epoch set already.
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param validatorIndices a list of validator indices being proven
     * @param validatorFieldsProofs proofs of each validator's `validatorFields` against the beacon state root
     * @param validatorFields the fields of the beacon chain "Validator" container. See consensus specs for
     * details: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     */
    function verifyWithdrawalCredentials(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        uint40[] calldata validatorIndices,
        bytes[] calldata validatorFieldsProofs,
        bytes32[][] calldata validatorFields
    ) external onlyOwnerOrProofSubmitter onlyWhenNotPaused(PAUSED_EIGENPODS_VERIFY_CREDENTIALS) {
        require(
            (validatorIndices.length == validatorFieldsProofs.length)
                && (validatorFieldsProofs.length == validatorFields.length),
            "EigenPod.verifyWithdrawalCredentials: validatorIndices and proofs must be same length"
        );
        // Calling this method using a `beaconTimestamp` <= `currentCheckpointTimestamp` would allow
        // a newly-verified validator to be submitted to `verifyCheckpointProofs`, making progress
        // on an existing checkpoint.
        require(
            beaconTimestamp > currentCheckpointTimestamp,
            "EigenPod.verifyWithdrawalCredentials: specified timestamp is too far in past"
        );
        // Verify passed-in `beaconStateRoot` against the beacon block root
        // forgefmt: disable-next-item
        BeaconChainProofs.verifyStateRoot({
            beaconBlockRoot: getParentBlockRoot(beaconTimestamp),
            proof: stateRootProof
        });
        uint256 totalAmountToBeRestakedWei;
        for (uint256 i = 0; i < validatorIndices.length; i++) {
            // forgefmt: disable-next-item
            totalAmountToBeRestakedWei += _verifyWithdrawalCredentials(
                stateRootProof.beaconStateRoot,
                validatorIndices[i],
                validatorFieldsProofs[i],
                validatorFields[i]
            );
        }
        // Update the EigenPodManager on this pod's new balance
        eigenPodManager.recordBeaconChainETHBalanceUpdate(podOwner, int256(totalAmountToBeRestakedWei));
    }
    /**
     * @dev Prove that one of this pod's active validators was slashed on the beacon chain. A successful
     * staleness proof allows the caller to start a checkpoint.
     *
     * @dev Note that in order to start a checkpoint, any existing checkpoint must already be completed!
     * (See `_startCheckpoint` for details)
     *
     * @dev Note that this method allows anyone to start a checkpoint as soon as a slashing occurs on the beacon
     * chain. This is intended to make it easier to external watchers to keep a pod's balance up to date.
     *
     * @dev Note too that beacon chain slashings are not instant. There is a delay between the initial slashing event
     * and the validator's final exit back to the execution layer. During this time, the validator's balance may or
     * may not drop further due to a correlation penalty. This method allows proof of a slashed validator
     * to initiate a checkpoint for as long as the validator remains on the beacon chain. Once the validator
     * has exited and been checkpointed at 0 balance, they are no longer "checkpoint-able" and cannot be proven
     * "stale" via this method.
     * See https://eth2book.info/capella/part3/transition/epoch/#slashings for more info.
     *
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param proof the fields of the beacon chain "Validator" container, along with a merkle proof against
     * the beacon state root. See the consensus specs for more details:
     * https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     *
     * @dev Staleness conditions:
     * - Validator's last checkpoint is older than `beaconTimestamp`
     * - Validator MUST be in `ACTIVE` status in the pod
     * - Validator MUST be slashed on the beacon chain
     */
    function verifyStaleBalance(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        BeaconChainProofs.ValidatorProof calldata proof
    ) external onlyWhenNotPaused(PAUSED_START_CHECKPOINT) onlyWhenNotPaused(PAUSED_VERIFY_STALE_BALANCE) {
        bytes32 validatorPubkey = proof.validatorFields.getPubkeyHash();
        ValidatorInfo memory validatorInfo = _validatorPubkeyHashToInfo[validatorPubkey];
        // Validator must be eligible for a staleness proof. Generally, this condition
        // ensures that the staleness proof is newer than the last time we got an update
        // on this validator.
        //
        // Note: It is possible for `validatorInfo.lastCheckpointedAt` to be 0 if
        // a validator's withdrawal credentials are verified when no checkpoint has
        // ever been completed in this pod. Technically, this would mean that `beaconTimestamp`
        // can be any valid EIP-4788 timestamp - because any nonzero value satisfies the
        // require below.
        //
        // However, in practice, if the only update we've seen from a validator is their
        // `verifyWithdrawalCredentials` proof, any valid `verifyStaleBalance` proof is
        // necessarily newer. This is because when a validator is initially slashed, their
        // exit epoch is set. And because `verifyWithdrawalCredentials` rejects validators
        // that have initiated exits, we know that if we're seeing a proof where the validator
        // is slashed that it MUST be newer than the `verifyWithdrawalCredentials` proof
        // (regardless of the relationship between `beaconTimestamp` and `lastCheckpointedAt`).
        require(
            beaconTimestamp > validatorInfo.lastCheckpointedAt,
            "EigenPod.verifyStaleBalance: proof is older than last checkpoint"
        );
        // Validator must be checkpoint-able
        require(validatorInfo.status == VALIDATOR_STATUS.ACTIVE, "EigenPod.verifyStaleBalance: validator is not active");
        // Validator must be slashed on the beacon chain
        require(
            proof.validatorFields.isValidatorSlashed(),
            "EigenPod.verifyStaleBalance: validator must be slashed to be marked stale"
        );
        // Verify passed-in `beaconStateRoot` against the beacon block root
        // forgefmt: disable-next-item
        BeaconChainProofs.verifyStateRoot({
            beaconBlockRoot: getParentBlockRoot(beaconTimestamp),
            proof: stateRootProof
        });
        // Verify Validator container proof against `beaconStateRoot`
        BeaconChainProofs.verifyValidatorFields({
            beaconStateRoot: stateRootProof.beaconStateRoot,
            validatorFields: proof.validatorFields,
            validatorFieldsProof: proof.proof,
            validatorIndex: uint40(validatorInfo.validatorIndex)
        });
        // Validator verified to be stale - start a checkpoint
        _startCheckpoint(false);
    }
    /// @notice called by owner of a pod to remove any ERC20s deposited in the pod
    function recoverTokens(
        IERC20[] memory tokenList,
        uint256[] memory amountsToWithdraw,
        address recipient
    ) external onlyEigenPodOwner onlyWhenNotPaused(PAUSED_NON_PROOF_WITHDRAWALS) {
        require(
            tokenList.length == amountsToWithdraw.length,
            "EigenPod.recoverTokens: tokenList and amountsToWithdraw must be same length"
        );
        for (uint256 i = 0; i < tokenList.length; i++) {
            tokenList[i].safeTransfer(recipient, amountsToWithdraw[i]);
        }
    }
    /// @notice Allows the owner of a pod to update the proof submitter, a permissioned
    /// address that can call `startCheckpoint` and `verifyWithdrawalCredentials`.
    /// @dev Note that EITHER the podOwner OR proofSubmitter can access these methods,
    /// so it's fine to set your proofSubmitter to 0 if you want the podOwner to be the
    /// only address that can call these methods.
    /// @param newProofSubmitter The new proof submitter address. If set to 0, only the
    /// pod owner will be able to call `startCheckpoint` and `verifyWithdrawalCredentials`
    function setProofSubmitter(address newProofSubmitter) external onlyEigenPodOwner {
        emit ProofSubmitterUpdated(proofSubmitter, newProofSubmitter);
        proofSubmitter = newProofSubmitter;
    }
    /// @notice Called by EigenPodManager when the owner wants to create another ETH validator.
    function stake(
        bytes calldata pubkey,
        bytes calldata signature,
        bytes32 depositDataRoot
    ) external payable onlyEigenPodManager {
        // stake on ethpos
        require(msg.value == 32 ether, "EigenPod.stake: must initially stake for any validator with 32 ether");
        ethPOS.deposit{value: 32 ether}(pubkey, _podWithdrawalCredentials(), signature, depositDataRoot);
        emit EigenPodStaked(pubkey);
    }
    /**
     * @notice Transfers `amountWei` in ether from this contract to the specified `recipient` address
     * @notice Called by EigenPodManager to withdrawBeaconChainETH that has been added to the EigenPod's balance due to a withdrawal from the beacon chain.
     * @dev The podOwner must have already proved sufficient withdrawals, so that this pod's `withdrawableRestakedExecutionLayerGwei` exceeds the
     * `amountWei` input (when converted to GWEI).
     * @dev Reverts if `amountWei` is not a whole Gwei amount
     */
    function withdrawRestakedBeaconChainETH(address recipient, uint256 amountWei) external onlyEigenPodManager {
        require(
            amountWei % GWEI_TO_WEI == 0,
            "EigenPod.withdrawRestakedBeaconChainETH: amountWei must be a whole Gwei amount"
        );
        uint64 amountGwei = uint64(amountWei / GWEI_TO_WEI);
        require(
            amountGwei <= withdrawableRestakedExecutionLayerGwei,
            "EigenPod.withdrawRestakedBeaconChainETH: amountGwei exceeds withdrawableRestakedExecutionLayerGwei"
        );
        withdrawableRestakedExecutionLayerGwei -= amountGwei;
        emit RestakedBeaconChainETHWithdrawn(recipient, amountWei);
        // transfer ETH from pod to `recipient` directly
        Address.sendValue(payable(recipient), amountWei);
    }
    /**
     *
     *                             INTERNAL FUNCTIONS
     *
     */
    /**
     * @notice internal function that proves an individual validator's withdrawal credentials
     * @param validatorIndex is the index of the validator being proven
     * @param validatorFieldsProof is the bytes that prove the ETH validator's  withdrawal credentials against a beacon chain state root
     * @param validatorFields are the fields of the "Validator Container", refer to consensus specs
     */
    function _verifyWithdrawalCredentials(
        bytes32 beaconStateRoot,
        uint40 validatorIndex,
        bytes calldata validatorFieldsProof,
        bytes32[] calldata validatorFields
    ) internal returns (uint256) {
        bytes32 pubkeyHash = validatorFields.getPubkeyHash();
        ValidatorInfo memory validatorInfo = _validatorPubkeyHashToInfo[pubkeyHash];
        // Withdrawal credential proofs should only be processed for "INACTIVE" validators
        require(
            validatorInfo.status == VALIDATOR_STATUS.INACTIVE,
            "EigenPod._verifyWithdrawalCredentials: validator must be inactive to prove withdrawal credentials"
        );
        // Validator should be active on the beacon chain, or in the process of activating.
        // This implies the validator has reached the minimum effective balance required
        // to become active on the beacon chain.
        //
        // This check is important because the Pectra upgrade will move any validators that
        // do NOT have an activation epoch to a "pending deposit queue," temporarily resetting
        // their current and effective balances to 0. This balance can be restored if a deposit
        // is made to bring the validator's balance above the minimum activation balance.
        // (See https://github.com/ethereum/consensus-specs/blob/dev/specs/electra/fork.md#upgrading-the-state)
        //
        // In the context of EigenLayer slashing, this temporary reset would allow pod shares
        // to temporarily decrease, then be restored later. This would effectively prevent these
        // shares from being slashable on EigenLayer for a short period of time.
        require(
            validatorFields.getActivationEpoch() != BeaconChainProofs.FAR_FUTURE_EPOCH,
            "EigenPod._verifyWithdrawalCredentials: validator must be in the process of activating"
        );
        // Validator should not already be in the process of exiting. This is an important property
        // this method needs to enforce to ensure a validator cannot be already-exited by the time
        // its withdrawal credentials are verified.
        //
        // Note that when a validator initiates an exit, two values are set:
        // - exit_epoch
        // - withdrawable_epoch
        //
        // The latter of these two values describes an epoch after which the validator's ETH MIGHT
        // have been exited to the EigenPod, depending on the state of the beacon chain withdrawal
        // queue.
        //
        // Requiring that a validator has not initiated exit by the time the EigenPod sees their
        // withdrawal credentials guarantees that the validator has not fully exited at this point.
        //
        // This is because:
        // - the earliest beacon chain slot allowed for withdrawal credential proofs is the earliest
        //   slot available in the EIP-4788 oracle, which keeps the last 8192 slots.
        // - when initiating an exit, a validator's earliest possible withdrawable_epoch is equal to
        //   1 + MAX_SEED_LOOKAHEAD + MIN_VALIDATOR_WITHDRAWABILITY_DELAY == 261 epochs (8352 slots).
        //
        // (See https://eth2book.info/capella/part3/helper/mutators/#initiate_validator_exit)
        require(
            validatorFields.getExitEpoch() == BeaconChainProofs.FAR_FUTURE_EPOCH,
            "EigenPod._verifyWithdrawalCredentials: validator must not be exiting"
        );
        // Ensure the validator's withdrawal credentials are pointed at this pod
        require(
            validatorFields.getWithdrawalCredentials() == bytes32(_podWithdrawalCredentials()),
            "EigenPod._verifyWithdrawalCredentials: proof is not for this EigenPod"
        );
        // Get the validator's effective balance. Note that this method uses effective balance, while
        // `verifyCheckpointProofs` uses current balance. Effective balance is updated per-epoch - so it's
        // less accurate, but is good enough for verifying withdrawal credentials.
        uint64 restakedBalanceGwei = validatorFields.getEffectiveBalanceGwei();
        // Verify passed-in validatorFields against verified beaconStateRoot:
        BeaconChainProofs.verifyValidatorFields({
            beaconStateRoot: beaconStateRoot,
            validatorFields: validatorFields,
            validatorFieldsProof: validatorFieldsProof,
            validatorIndex: validatorIndex
        });
        // Account for validator in future checkpoints. Note that if this pod has never started a
        // checkpoint before, `lastCheckpointedAt` will be zero here. This is fine because the main
        // purpose of `lastCheckpointedAt` is to enforce that newly-verified validators are not
        // eligible to progress already-existing checkpoints - however in this case, no checkpoints exist.
        activeValidatorCount++;
        uint64 lastCheckpointedAt =
            currentCheckpointTimestamp == 0 ? lastCheckpointTimestamp : currentCheckpointTimestamp;
        // Proofs complete - create the validator in state
        _validatorPubkeyHashToInfo[pubkeyHash] = ValidatorInfo({
            validatorIndex: validatorIndex,
            restakedBalanceGwei: restakedBalanceGwei,
            lastCheckpointedAt: lastCheckpointedAt,
            status: VALIDATOR_STATUS.ACTIVE
        });
        emit ValidatorRestaked(validatorIndex);
        emit ValidatorBalanceUpdated(validatorIndex, lastCheckpointedAt, restakedBalanceGwei);
        return restakedBalanceGwei * GWEI_TO_WEI;
    }
    function _verifyCheckpointProof(
        ValidatorInfo memory validatorInfo,
        uint64 checkpointTimestamp,
        bytes32 balanceContainerRoot,
        BeaconChainProofs.BalanceProof calldata proof
    ) internal returns (int128 balanceDeltaGwei, uint64 exitedBalanceGwei) {
        uint40 validatorIndex = uint40(validatorInfo.validatorIndex);
        // Verify validator balance against `balanceContainerRoot`
        uint64 prevBalanceGwei = validatorInfo.restakedBalanceGwei;
        uint64 newBalanceGwei = BeaconChainProofs.verifyValidatorBalance({
            balanceContainerRoot: balanceContainerRoot,
            validatorIndex: validatorIndex,
            proof: proof
        });
        // Calculate change in the validator's balance since the last proof
        if (newBalanceGwei != prevBalanceGwei) {
            // forgefmt: disable-next-item
            balanceDeltaGwei = _calcBalanceDelta({
                newAmountGwei: newBalanceGwei,
                previousAmountGwei: prevBalanceGwei
            });
            emit ValidatorBalanceUpdated(validatorIndex, checkpointTimestamp, newBalanceGwei);
        }
        validatorInfo.restakedBalanceGwei = newBalanceGwei;
        validatorInfo.lastCheckpointedAt = checkpointTimestamp;
        // If the validator's new balance is 0, mark them withdrawn
        if (newBalanceGwei == 0) {
            activeValidatorCount--;
            validatorInfo.status = VALIDATOR_STATUS.WITHDRAWN;
            // If we reach this point, `balanceDeltaGwei` should always be negative,
            // so this should be a safe conversion
            exitedBalanceGwei = uint64(uint128(-balanceDeltaGwei));
            emit ValidatorWithdrawn(checkpointTimestamp, validatorIndex);
        }
        return (balanceDeltaGwei, exitedBalanceGwei);
    }
    /**
     * @dev Initiate a checkpoint proof by snapshotting both the pod's ETH balance and the
     * current block's parent block root. After providing a checkpoint proof for each of the
     * pod's ACTIVE validators, the pod's ETH balance is awarded shares and can be withdrawn.
     * @dev ACTIVE validators are validators with verified withdrawal credentials (See
     * `verifyWithdrawalCredentials` for details)
     * @dev If the pod does not have any ACTIVE validators, the checkpoint is automatically
     * finalized.
     * @dev Once started, a checkpoint MUST be completed! It is not possible to start a
     * checkpoint if the existing one is incomplete.
     * @param revertIfNoBalance If the available ETH balance for checkpointing is 0 and this is
     * true, this method will revert
     */
    function _startCheckpoint(bool revertIfNoBalance) internal {
        require(
            currentCheckpointTimestamp == 0,
            "EigenPod._startCheckpoint: must finish previous checkpoint before starting another"
        );
        // Prevent a checkpoint being completable twice in the same block. This prevents an edge case
        // where the second checkpoint would not be completable.
        //
        // This is because the validators checkpointed in the first checkpoint would have a `lastCheckpointedAt`
        // value equal to the second checkpoint, causing their proofs to get skipped in `verifyCheckpointProofs`
        require(
            lastCheckpointTimestamp != uint64(block.timestamp),
            "EigenPod._startCheckpoint: cannot checkpoint twice in one block"
        );
        // Snapshot pod balance at the start of the checkpoint, subtracting pod balance that has
        // previously been credited with shares. Once the checkpoint is finalized, `podBalanceGwei`
        // will be added to the total validator balance delta and credited as shares.
        //
        // Note: On finalization, `podBalanceGwei` is added to `withdrawableRestakedExecutionLayerGwei`
        // to denote that it has been credited with shares. Because this value is denominated in gwei,
        // `podBalanceGwei` is also converted to a gwei amount here. This means that any sub-gwei amounts
        // sent to the pod are not credited with shares and are therefore not withdrawable.
        // This can be addressed by topping up a pod's balance to a value divisible by 1 gwei.
        uint64 podBalanceGwei = uint64(address(this).balance / GWEI_TO_WEI) - withdrawableRestakedExecutionLayerGwei;
        // If the caller doesn't want a "0 balance" checkpoint, revert
        if (revertIfNoBalance && podBalanceGwei == 0) {
            revert("EigenPod._startCheckpoint: no balance available to checkpoint");
        }
        // Create checkpoint using the previous block's root for proofs, and the current
        // `activeValidatorCount` as the number of checkpoint proofs needed to finalize
        // the checkpoint.
        Checkpoint memory checkpoint = Checkpoint({
            beaconBlockRoot: getParentBlockRoot(uint64(block.timestamp)),
            proofsRemaining: uint24(activeValidatorCount),
            podBalanceGwei: podBalanceGwei,
            balanceDeltasGwei: 0
        });
        // Place checkpoint in storage. If `proofsRemaining` is 0, the checkpoint
        // is automatically finalized.
        currentCheckpointTimestamp = uint64(block.timestamp);
        _updateCheckpoint(checkpoint);
        emit CheckpointCreated(uint64(block.timestamp), checkpoint.beaconBlockRoot, checkpoint.proofsRemaining);
    }
    /**
     * @dev Finish progress on a checkpoint and store it in state.
     * @dev If the checkpoint has no proofs remaining, it is finalized:
     * - a share delta is calculated and sent to the `EigenPodManager`
     * - the checkpointed `podBalanceGwei` is added to `withdrawableRestakedExecutionLayerGwei`
     * - `lastCheckpointTimestamp` is updated
     * - `_currentCheckpoint` and `currentCheckpointTimestamp` are deleted
     */
    function _updateCheckpoint(Checkpoint memory checkpoint) internal {
        if (checkpoint.proofsRemaining == 0) {
            int256 totalShareDeltaWei =
                (int128(uint128(checkpoint.podBalanceGwei)) + checkpoint.balanceDeltasGwei) * int256(GWEI_TO_WEI);
            // Add any native ETH in the pod to `withdrawableRestakedExecutionLayerGwei`
            // ... this amount can be withdrawn via the `DelegationManager` withdrawal queue
            withdrawableRestakedExecutionLayerGwei += checkpoint.podBalanceGwei;
            // Finalize the checkpoint
            lastCheckpointTimestamp = currentCheckpointTimestamp;
            delete currentCheckpointTimestamp;
            delete _currentCheckpoint;
            // Update pod owner's shares
            eigenPodManager.recordBeaconChainETHBalanceUpdate(podOwner, totalShareDeltaWei);
            emit CheckpointFinalized(lastCheckpointTimestamp, totalShareDeltaWei);
        } else {
            _currentCheckpoint = checkpoint;
        }
    }
    function _podWithdrawalCredentials() internal view returns (bytes memory) {
        return abi.encodePacked(bytes1(uint8(1)), bytes11(0), address(this));
    }
    ///@notice Calculates the pubkey hash of a validator's pubkey as per SSZ spec
    function _calculateValidatorPubkeyHash(bytes memory validatorPubkey) internal pure returns (bytes32) {
        require(validatorPubkey.length == 48, "EigenPod._calculateValidatorPubkeyHash must be a 48-byte BLS public key");
        return sha256(abi.encodePacked(validatorPubkey, bytes16(0)));
    }
    /// @dev Calculates the delta between two Gwei amounts and returns as an int256
    function _calcBalanceDelta(uint64 newAmountGwei, uint64 previousAmountGwei) internal pure returns (int128) {
        return int128(uint128(newAmountGwei)) - int128(uint128(previousAmountGwei));
    }
    /**
     *
     *                         VIEW FUNCTIONS
     *
     */
    /// @notice Returns the validatorInfo for a given validatorPubkeyHash
    function validatorPubkeyHashToInfo(bytes32 validatorPubkeyHash) external view returns (ValidatorInfo memory) {
        return _validatorPubkeyHashToInfo[validatorPubkeyHash];
    }
    /// @notice Returns the validatorInfo for a given validatorPubkey
    function validatorPubkeyToInfo(bytes calldata validatorPubkey) external view returns (ValidatorInfo memory) {
        return _validatorPubkeyHashToInfo[_calculateValidatorPubkeyHash(validatorPubkey)];
    }
    function validatorStatus(bytes32 pubkeyHash) external view returns (VALIDATOR_STATUS) {
        return _validatorPubkeyHashToInfo[pubkeyHash].status;
    }
    /// @notice Returns the validator status for a given validatorPubkey
    function validatorStatus(bytes calldata validatorPubkey) external view returns (VALIDATOR_STATUS) {
        bytes32 validatorPubkeyHash = _calculateValidatorPubkeyHash(validatorPubkey);
        return _validatorPubkeyHashToInfo[validatorPubkeyHash].status;
    }
    /// @notice Returns the currently-active checkpoint
    function currentCheckpoint() public view returns (Checkpoint memory) {
        return _currentCheckpoint;
    }
    /// @notice Query the 4788 oracle to get the parent block root of the slot with the given `timestamp`
    /// @param timestamp of the block for which the parent block root will be returned. MUST correspond
    /// to an existing slot within the last 24 hours. If the slot at `timestamp` was skipped, this method
    /// will revert.
    function getParentBlockRoot(uint64 timestamp) public view returns (bytes32) {
        require(
            block.timestamp - timestamp < BEACON_ROOTS_HISTORY_BUFFER_LENGTH * 12,
            "EigenPod.getParentBlockRoot: timestamp out of range"
        );
        (bool success, bytes memory result) = BEACON_ROOTS_ADDRESS.staticcall(abi.encode(timestamp));
        require(success && result.length > 0, "EigenPod.getParentBlockRoot: invalid block root returned");
        return abi.decode(result, (bytes32));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }
    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import "./Merkle.sol";
import "../libraries/Endian.sol";
//Utility library for parsing and PHASE0 beacon chain block headers
//SSZ Spec: https://github.com/ethereum/consensus-specs/blob/dev/ssz/simple-serialize.md#merkleization
//BeaconBlockHeader Spec: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconblockheader
//BeaconState Spec: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconstate
library BeaconChainProofs {
    /// @notice Heights of various merkle trees in the beacon chain
    /// - beaconBlockRoot
    /// |                                             HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
    /// -- beaconStateRoot
    /// |                                             HEIGHT: BEACON_STATE_TREE_HEIGHT
    /// validatorContainerRoot, balanceContainerRoot
    /// |                       |                     HEIGHT: BALANCE_TREE_HEIGHT
    /// |                       individual balances
    /// |                                             HEIGHT: VALIDATOR_TREE_HEIGHT
    /// individual validators
    uint256 internal constant BEACON_BLOCK_HEADER_TREE_HEIGHT = 3;
    uint256 internal constant BEACON_STATE_TREE_HEIGHT = 5;
    uint256 internal constant BALANCE_TREE_HEIGHT = 38;
    uint256 internal constant VALIDATOR_TREE_HEIGHT = 40;
    /// @notice Index of the beaconStateRoot in the `BeaconBlockHeader` container
    ///
    /// BeaconBlockHeader = [..., state_root, ...]
    ///                      0...      3
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconblockheader)
    uint256 internal constant STATE_ROOT_INDEX = 3;
    /// @notice Indices for fields in the `BeaconState` container
    ///
    /// BeaconState = [..., validators, balances, ...]
    ///                0...     11         12
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/capella/beacon-chain.md#beaconstate)
    uint256 internal constant VALIDATOR_CONTAINER_INDEX = 11;
    uint256 internal constant BALANCE_CONTAINER_INDEX = 12;
    /// @notice Number of fields in the `Validator` container
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator)
    uint256 internal constant VALIDATOR_FIELDS_LENGTH = 8;
    /// @notice Indices for fields in the `Validator` container
    uint256 internal constant VALIDATOR_PUBKEY_INDEX = 0;
    uint256 internal constant VALIDATOR_WITHDRAWAL_CREDENTIALS_INDEX = 1;
    uint256 internal constant VALIDATOR_BALANCE_INDEX = 2;
    uint256 internal constant VALIDATOR_SLASHED_INDEX = 3;
    uint256 internal constant VALIDATOR_ACTIVATION_EPOCH_INDEX = 5;
    uint256 internal constant VALIDATOR_EXIT_EPOCH_INDEX = 6;
    /// @notice Slot/Epoch timings
    uint64 internal constant SECONDS_PER_SLOT = 12;
    uint64 internal constant SLOTS_PER_EPOCH = 32;
    uint64 internal constant SECONDS_PER_EPOCH = SLOTS_PER_EPOCH * SECONDS_PER_SLOT;
    /// @notice `FAR_FUTURE_EPOCH` is used as the default value for certain `Validator`
    /// fields when a `Validator` is first created on the beacon chain
    uint64 internal constant FAR_FUTURE_EPOCH = type(uint64).max;
    bytes8 internal constant UINT64_MASK = 0xffffffffffffffff;
    /// @notice Contains a beacon state root and a merkle proof verifying its inclusion under a beacon block root
    struct StateRootProof {
        bytes32 beaconStateRoot;
        bytes proof;
    }
    /// @notice Contains a validator's fields and a merkle proof of their inclusion under a beacon state root
    struct ValidatorProof {
        bytes32[] validatorFields;
        bytes proof;
    }
    /// @notice Contains a beacon balance container root and a proof of this root under a beacon block root
    struct BalanceContainerProof {
        bytes32 balanceContainerRoot;
        bytes proof;
    }
    /// @notice Contains a validator balance root and a proof of its inclusion under a balance container root
    struct BalanceProof {
        bytes32 pubkeyHash;
        bytes32 balanceRoot;
        bytes proof;
    }
    /**
     *
     *              VALIDATOR FIELDS -> BEACON STATE ROOT -> BEACON BLOCK ROOT
     *
     */
    /// @notice Verify a merkle proof of the beacon state root against a beacon block root
    /// @param beaconBlockRoot merkle root of the beacon block
    /// @param proof the beacon state root and merkle proof of its inclusion under `beaconBlockRoot`
    function verifyStateRoot(bytes32 beaconBlockRoot, StateRootProof calldata proof) internal view {
        require(
            proof.proof.length == 32 * (BEACON_BLOCK_HEADER_TREE_HEIGHT),
            "BeaconChainProofs.verifyStateRoot: Proof has incorrect length"
        );
        /// This merkle proof verifies the `beaconStateRoot` under the `beaconBlockRoot`
        /// - beaconBlockRoot
        /// |                            HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
        /// -- beaconStateRoot
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: beaconBlockRoot,
                leaf: proof.beaconStateRoot,
                index: STATE_ROOT_INDEX
            }),
            "BeaconChainProofs.verifyStateRoot: Invalid state root merkle proof"
        );
    }
    /// @notice Verify a merkle proof of a validator container against a `beaconStateRoot`
    /// @dev This proof starts at a validator's container root, proves through the validator container root,
    /// and continues proving to the root of the `BeaconState`
    /// @dev See https://eth2book.info/capella/part3/containers/dependencies/#validator for info on `Validator` containers
    /// @dev See https://eth2book.info/capella/part3/containers/state/#beaconstate for info on `BeaconState` containers
    /// @param beaconStateRoot merkle root of the `BeaconState` container
    /// @param validatorFields an individual validator's fields. These are merklized to form a `validatorRoot`,
    /// which is used as the leaf to prove against `beaconStateRoot`
    /// @param validatorFieldsProof a merkle proof of inclusion of `validatorFields` under `beaconStateRoot`
    /// @param validatorIndex the validator's unique index
    function verifyValidatorFields(
        bytes32 beaconStateRoot,
        bytes32[] calldata validatorFields,
        bytes calldata validatorFieldsProof,
        uint40 validatorIndex
    ) internal view {
        require(
            validatorFields.length == VALIDATOR_FIELDS_LENGTH,
            "BeaconChainProofs.verifyValidatorFields: Validator fields has incorrect length"
        );
        /// Note: the reason we use `VALIDATOR_TREE_HEIGHT + 1` here is because the merklization process for
        /// this container includes hashing the root of the validator tree with the length of the validator list
        require(
            validatorFieldsProof.length == 32 * ((VALIDATOR_TREE_HEIGHT + 1) + BEACON_STATE_TREE_HEIGHT),
            "BeaconChainProofs.verifyValidatorFields: Proof has incorrect length"
        );
        // Merkleize `validatorFields` to get the leaf to prove
        bytes32 validatorRoot = Merkle.merkleizeSha256(validatorFields);
        /// This proof combines two proofs, so its index accounts for the relative position of leaves in two trees:
        /// - beaconStateRoot
        /// |                            HEIGHT: BEACON_STATE_TREE_HEIGHT
        /// -- validatorContainerRoot
        /// |                            HEIGHT: VALIDATOR_TREE_HEIGHT + 1
        /// ---- validatorRoot
        uint256 index = (VALIDATOR_CONTAINER_INDEX << (VALIDATOR_TREE_HEIGHT + 1)) | uint256(validatorIndex);
        require(
            Merkle.verifyInclusionSha256({
                proof: validatorFieldsProof,
                root: beaconStateRoot,
                leaf: validatorRoot,
                index: index
            }),
            "BeaconChainProofs.verifyValidatorFields: Invalid merkle proof"
        );
    }
    /**
     *
     *          VALIDATOR BALANCE -> BALANCE CONTAINER ROOT -> BEACON BLOCK ROOT
     *
     */
    /// @notice Verify a merkle proof of the beacon state's balances container against the beacon block root
    /// @dev This proof starts at the balance container root, proves through the beacon state root, and
    /// continues proving through the beacon block root. As a result, this proof will contain elements
    /// of a `StateRootProof` under the same block root, with the addition of proving the balances field
    /// within the beacon state.
    /// @dev This is used to make checkpoint proofs more efficient, as a checkpoint will verify multiple balances
    /// against the same balance container root.
    /// @param beaconBlockRoot merkle root of the beacon block
    /// @param proof a beacon balance container root and merkle proof of its inclusion under `beaconBlockRoot`
    function verifyBalanceContainer(bytes32 beaconBlockRoot, BalanceContainerProof calldata proof) internal view {
        require(
            proof.proof.length == 32 * (BEACON_BLOCK_HEADER_TREE_HEIGHT + BEACON_STATE_TREE_HEIGHT),
            "BeaconChainProofs.verifyBalanceContainer: Proof has incorrect length"
        );
        /// This proof combines two proofs, so its index accounts for the relative position of leaves in two trees:
        /// - beaconBlockRoot
        /// |                            HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
        /// -- beaconStateRoot
        /// |                            HEIGHT: BEACON_STATE_TREE_HEIGHT
        /// ---- balancesContainerRoot
        uint256 index = (STATE_ROOT_INDEX << (BEACON_STATE_TREE_HEIGHT)) | BALANCE_CONTAINER_INDEX;
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: beaconBlockRoot,
                leaf: proof.balanceContainerRoot,
                index: index
            }),
            "BeaconChainProofs.verifyBalanceContainer: invalid balance container proof"
        );
    }
    /// @notice Verify a merkle proof of a validator's balance against the beacon state's `balanceContainerRoot`
    /// @param balanceContainerRoot the merkle root of all validators' current balances
    /// @param validatorIndex the index of the validator whose balance we are proving
    /// @param proof the validator's associated balance root and a merkle proof of inclusion under `balanceContainerRoot`
    /// @return validatorBalanceGwei the validator's current balance (in gwei)
    function verifyValidatorBalance(
        bytes32 balanceContainerRoot,
        uint40 validatorIndex,
        BalanceProof calldata proof
    ) internal view returns (uint64 validatorBalanceGwei) {
        /// Note: the reason we use `BALANCE_TREE_HEIGHT + 1` here is because the merklization process for
        /// this container includes hashing the root of the balances tree with the length of the balances list
        require(
            proof.proof.length == 32 * (BALANCE_TREE_HEIGHT + 1),
            "BeaconChainProofs.verifyValidatorBalance: Proof has incorrect length"
        );
        /// When merkleized, beacon chain balances are combined into groups of 4 called a `balanceRoot`. The merkle
        /// proof here verifies that this validator's `balanceRoot` is included in the `balanceContainerRoot`
        /// - balanceContainerRoot
        /// |                            HEIGHT: BALANCE_TREE_HEIGHT
        /// -- balanceRoot
        uint256 balanceIndex = uint256(validatorIndex / 4);
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: balanceContainerRoot,
                leaf: proof.balanceRoot,
                index: balanceIndex
            }),
            "BeaconChainProofs.verifyValidatorBalance: Invalid merkle proof"
        );
        /// Extract the individual validator's balance from the `balanceRoot`
        return getBalanceAtIndex(proof.balanceRoot, validatorIndex);
    }
    /**
     * @notice Parses a balanceRoot to get the uint64 balance of a validator.
     * @dev During merkleization of the beacon state balance tree, four uint64 values are treated as a single
     * leaf in the merkle tree. We use validatorIndex % 4 to determine which of the four uint64 values to
     * extract from the balanceRoot.
     * @param balanceRoot is the combination of 4 validator balances being proven for
     * @param validatorIndex is the index of the validator being proven for
     * @return The validator's balance, in Gwei
     */
    function getBalanceAtIndex(bytes32 balanceRoot, uint40 validatorIndex) internal pure returns (uint64) {
        uint256 bitShiftAmount = (validatorIndex % 4) * 64;
        return Endian.fromLittleEndianUint64(bytes32((uint256(balanceRoot) << bitShiftAmount)));
    }
    /// @notice Indices for fields in the `Validator` container:
    /// 0: pubkey
    /// 1: withdrawal credentials
    /// 2: effective balance
    /// 3: slashed?
    /// 4: activation eligibility epoch
    /// 5: activation epoch
    /// 6: exit epoch
    /// 7: withdrawable epoch
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator)
    /// @dev Retrieves a validator's pubkey hash
    function getPubkeyHash(bytes32[] memory validatorFields) internal pure returns (bytes32) {
        return validatorFields[VALIDATOR_PUBKEY_INDEX];
    }
    /// @dev Retrieves a validator's withdrawal credentials
    function getWithdrawalCredentials(bytes32[] memory validatorFields) internal pure returns (bytes32) {
        return validatorFields[VALIDATOR_WITHDRAWAL_CREDENTIALS_INDEX];
    }
    /// @dev Retrieves a validator's effective balance (in gwei)
    function getEffectiveBalanceGwei(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_BALANCE_INDEX]);
    }
    /// @dev Retrieves a validator's activation epoch
    function getActivationEpoch(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_ACTIVATION_EPOCH_INDEX]);
    }
    /// @dev Retrieves true IFF a validator is marked slashed
    function isValidatorSlashed(bytes32[] memory validatorFields) internal pure returns (bool) {
        return validatorFields[VALIDATOR_SLASHED_INDEX] != 0;
    }
    /// @dev Retrieves a validator's exit epoch
    function getExitEpoch(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_EXIT_EPOCH_INDEX]);
    }
}
// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;
        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)
            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)
            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)
            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }
            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))
            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)
            for { let cc := add(_postBytes, 0x20) } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } { mstore(mc, mload(cc)) }
            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }
        return tempBytes;
    }
    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.
                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(
                    sc,
                    add(
                        and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00),
                        and(mload(mc), mask)
                    )
                )
                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } { sstore(sc, mload(mc)) }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                // solhint-disable-next-line no-unused-vars
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(sc, add(sload(sc), and(mload(mc), mask)))
                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } { sstore(sc, mload(mc)) }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }
    function slice(bytes memory _bytes, uint256 _start, uint256 _length) internal pure returns (bytes memory) {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");
        bytes memory tempBytes;
        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)
                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)
                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)
                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } { mstore(mc, mload(cc)) }
                mstore(tempBytes, _length)
                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)
                mstore(0x40, add(tempBytes, 0x20))
            }
        }
        return tempBytes;
    }
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;
        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }
        return tempAddress;
    }
    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
        uint8 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }
        return tempUint;
    }
    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }
        return tempUint;
    }
    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }
        return tempUint;
    }
    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }
        return tempUint;
    }
    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }
        return tempUint;
    }
    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }
        return tempUint;
    }
    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }
        return tempUint;
    }
    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;
        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }
        return tempBytes32;
    }
    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;
        assembly {
            let length := mload(_preBytes)
            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1
                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)
                for { let cc := add(_postBytes, 0x20) } // while(uint256(mc < end) + cb == 2) // the next line is the loop condition:
                eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }
        return success;
    }
    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;
        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)
                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1
                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)
                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)
                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        // solhint-disable-next-line no-empty-blocks
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }
        return success;
    }
}
// ┏━━━┓━┏┓━┏┓━━┏━━━┓━━┏━━━┓━━━━┏━━━┓━━━━━━━━━━━━━━━━━━━┏┓━━━━━┏━━━┓━━━━━━━━━┏┓━━━━━━━━━━━━━━┏┓━
// ┃┏━━┛┏┛┗┓┃┃━━┃┏━┓┃━━┃┏━┓┃━━━━┗┓┏┓┃━━━━━━━━━━━━━━━━━━┏┛┗┓━━━━┃┏━┓┃━━━━━━━━┏┛┗┓━━━━━━━━━━━━┏┛┗┓
// ┃┗━━┓┗┓┏┛┃┗━┓┗┛┏┛┃━━┃┃━┃┃━━━━━┃┃┃┃┏━━┓┏━━┓┏━━┓┏━━┓┏┓┗┓┏┛━━━━┃┃━┗┛┏━━┓┏━┓━┗┓┏┛┏━┓┏━━┓━┏━━┓┗┓┏┛
// ┃┏━━┛━┃┃━┃┏┓┃┏━┛┏┛━━┃┃━┃┃━━━━━┃┃┃┃┃┏┓┃┃┏┓┃┃┏┓┃┃━━┫┣┫━┃┃━━━━━┃┃━┏┓┃┏┓┃┃┏┓┓━┃┃━┃┏┛┗━┓┃━┃┏━┛━┃┃━
// ┃┗━━┓━┃┗┓┃┃┃┃┃┃┗━┓┏┓┃┗━┛┃━━━━┏┛┗┛┃┃┃━┫┃┗┛┃┃┗┛┃┣━━┃┃┃━┃┗┓━━━━┃┗━┛┃┃┗┛┃┃┃┃┃━┃┗┓┃┃━┃┗┛┗┓┃┗━┓━┃┗┓
// ┗━━━┛━┗━┛┗┛┗┛┗━━━┛┗┛┗━━━┛━━━━┗━━━┛┗━━┛┃┏━┛┗━━┛┗━━┛┗┛━┗━┛━━━━┗━━━┛┗━━┛┗┛┗┛━┗━┛┗┛━┗━━━┛┗━━┛━┗━┛
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┃┃━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┗┛━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// SPDX-License-Identifier: CC0-1.0
pragma solidity >=0.5.0;
// This interface is designed to be compatible with the Vyper version.
/// @notice This is the Ethereum 2.0 deposit contract interface.
/// For more information see the Phase 0 specification under https://github.com/ethereum/eth2.0-specs
interface IETHPOSDeposit {
    /// @notice A processed deposit event.
    event DepositEvent(bytes pubkey, bytes withdrawal_credentials, bytes amount, bytes signature, bytes index);
    /// @notice Submit a Phase 0 DepositData object.
    /// @param pubkey A BLS12-381 public key.
    /// @param withdrawal_credentials Commitment to a public key for withdrawals.
    /// @param signature A BLS12-381 signature.
    /// @param deposit_data_root The SHA-256 hash of the SSZ-encoded DepositData object.
    /// Used as a protection against malformed input.
    function deposit(
        bytes calldata pubkey,
        bytes calldata withdrawal_credentials,
        bytes calldata signature,
        bytes32 deposit_data_root
    ) external payable;
    /// @notice Query the current deposit root hash.
    /// @return The deposit root hash.
    function get_deposit_root() external view returns (bytes32);
    /// @notice Query the current deposit count.
    /// @return The deposit count encoded as a little endian 64-bit number.
    function get_deposit_count() external view returns (bytes memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/proxy/beacon/IBeacon.sol";
import "./IETHPOSDeposit.sol";
import "./IStrategyManager.sol";
import "./IEigenPod.sol";
import "./IPausable.sol";
import "./ISlasher.sol";
import "./IStrategy.sol";
/**
 * @title Interface for factory that creates and manages solo staking pods that have their withdrawal credentials pointed to EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface IEigenPodManager is IPausable {
    /// @notice Emitted to notify the deployment of an EigenPod
    event PodDeployed(address indexed eigenPod, address indexed podOwner);
    /// @notice Emitted to notify a deposit of beacon chain ETH recorded in the strategy manager
    event BeaconChainETHDeposited(address indexed podOwner, uint256 amount);
    /// @notice Emitted when the balance of an EigenPod is updated
    event PodSharesUpdated(address indexed podOwner, int256 sharesDelta);
    /// @notice Emitted every time the total shares of a pod are updated
    event NewTotalShares(address indexed podOwner, int256 newTotalShares);
    /// @notice Emitted when a withdrawal of beacon chain ETH is completed
    event BeaconChainETHWithdrawalCompleted(
        address indexed podOwner,
        uint256 shares,
        uint96 nonce,
        address delegatedAddress,
        address withdrawer,
        bytes32 withdrawalRoot
    );
    /**
     * @notice Creates an EigenPod for the sender.
     * @dev Function will revert if the `msg.sender` already has an EigenPod.
     * @dev Returns EigenPod address
     */
    function createPod() external returns (address);
    /**
     * @notice Stakes for a new beacon chain validator on the sender's EigenPod.
     * Also creates an EigenPod for the sender if they don't have one already.
     * @param pubkey The 48 bytes public key of the beacon chain validator.
     * @param signature The validator's signature of the deposit data.
     * @param depositDataRoot The root/hash of the deposit data for the validator's deposit.
     */
    function stake(bytes calldata pubkey, bytes calldata signature, bytes32 depositDataRoot) external payable;
    /**
     * @notice Changes the `podOwner`'s shares by `sharesDelta` and performs a call to the DelegationManager
     * to ensure that delegated shares are also tracked correctly
     * @param podOwner is the pod owner whose balance is being updated.
     * @param sharesDelta is the change in podOwner's beaconChainETHStrategy shares
     * @dev Callable only by the podOwner's EigenPod contract.
     * @dev Reverts if `sharesDelta` is not a whole Gwei amount
     */
    function recordBeaconChainETHBalanceUpdate(address podOwner, int256 sharesDelta) external;
    /// @notice Returns the address of the `podOwner`'s EigenPod if it has been deployed.
    function ownerToPod(address podOwner) external view returns (IEigenPod);
    /// @notice Returns the address of the `podOwner`'s EigenPod (whether it is deployed yet or not).
    function getPod(address podOwner) external view returns (IEigenPod);
    /// @notice The ETH2 Deposit Contract
    function ethPOS() external view returns (IETHPOSDeposit);
    /// @notice Beacon proxy to which the EigenPods point
    function eigenPodBeacon() external view returns (IBeacon);
    /// @notice EigenLayer's StrategyManager contract
    function strategyManager() external view returns (IStrategyManager);
    /// @notice EigenLayer's Slasher contract
    function slasher() external view returns (ISlasher);
    /// @notice Returns 'true' if the `podOwner` has created an EigenPod, and 'false' otherwise.
    function hasPod(address podOwner) external view returns (bool);
    /// @notice Returns the number of EigenPods that have been created
    function numPods() external view returns (uint256);
    /**
     * @notice Mapping from Pod owner owner to the number of shares they have in the virtual beacon chain ETH strategy.
     * @dev The share amount can become negative. This is necessary to accommodate the fact that a pod owner's virtual beacon chain ETH shares can
     * decrease between the pod owner queuing and completing a withdrawal.
     * When the pod owner's shares would otherwise increase, this "deficit" is decreased first _instead_.
     * Likewise, when a withdrawal is completed, this "deficit" is decreased and the withdrawal amount is decreased; We can think of this
     * as the withdrawal "paying off the deficit".
     */
    function podOwnerShares(address podOwner) external view returns (int256);
    /// @notice returns canonical, virtual beaconChainETH strategy
    function beaconChainETHStrategy() external view returns (IStrategy);
    /**
     * @notice Used by the DelegationManager to remove a pod owner's shares while they're in the withdrawal queue.
     * Simply decreases the `podOwner`'s shares by `shares`, down to a minimum of zero.
     * @dev This function reverts if it would result in `podOwnerShares[podOwner]` being less than zero, i.e. it is forbidden for this function to
     * result in the `podOwner` incurring a "share deficit". This behavior prevents a Staker from queuing a withdrawal which improperly removes excessive
     * shares from the operator to whom the staker is delegated.
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function removeShares(address podOwner, uint256 shares) external;
    /**
     * @notice Increases the `podOwner`'s shares by `shares`, paying off deficit if possible.
     * Used by the DelegationManager to award a pod owner shares on exiting the withdrawal queue
     * @dev Returns the number of shares added to `podOwnerShares[podOwner]` above zero, which will be less than the `shares` input
     * in the event that the podOwner has an existing shares deficit (i.e. `podOwnerShares[podOwner]` starts below zero)
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function addShares(address podOwner, uint256 shares) external returns (uint256);
    /**
     * @notice Used by the DelegationManager to complete a withdrawal, sending tokens to some destination address
     * @dev Prioritizes decreasing the podOwner's share deficit, if they have one
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function withdrawSharesAsTokens(address podOwner, address destination, uint256 shares) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "../interfaces/IPauserRegistry.sol";
/**
 * @title Adds pausability to a contract, with pausing & unpausing controlled by the `pauser` and `unpauser` of a PauserRegistry contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Contracts that inherit from this contract may define their own `pause` and `unpause` (and/or related) functions.
 * These functions should be permissioned as "onlyPauser" which defers to a `PauserRegistry` for determining access control.
 * @dev Pausability is implemented using a uint256, which allows up to 256 different single bit-flags; each bit can potentially pause different functionality.
 * Inspiration for this was taken from the NearBridge design here https://etherscan.io/address/0x3FEFc5A4B1c02f21cBc8D3613643ba0635b9a873#code.
 * For the `pause` and `unpause` functions we've implemented, if you pause, you can only flip (any number of) switches to on/1 (aka "paused"), and if you unpause,
 * you can only flip (any number of) switches to off/0 (aka "paused").
 * If you want a pauseXYZ function that just flips a single bit / "pausing flag", it will:
 * 1) 'bit-wise and' (aka `&`) a flag with the current paused state (as a uint256)
 * 2) update the paused state to this new value
 * @dev We note as well that we have chosen to identify flags by their *bit index* as opposed to their numerical value, so, e.g. defining `DEPOSITS_PAUSED = 3`
 * indicates specifically that if the *third bit* of `_paused` is flipped -- i.e. it is a '1' -- then deposits should be paused
 */
interface IPausable {
    /// @notice Emitted when the `pauserRegistry` is set to `newPauserRegistry`.
    event PauserRegistrySet(IPauserRegistry pauserRegistry, IPauserRegistry newPauserRegistry);
    /// @notice Emitted when the pause is triggered by `account`, and changed to `newPausedStatus`.
    event Paused(address indexed account, uint256 newPausedStatus);
    /// @notice Emitted when the pause is lifted by `account`, and changed to `newPausedStatus`.
    event Unpaused(address indexed account, uint256 newPausedStatus);
    /// @notice Address of the `PauserRegistry` contract that this contract defers to for determining access control (for pausing).
    function pauserRegistry() external view returns (IPauserRegistry);
    /**
     * @notice This function is used to pause an EigenLayer contract's functionality.
     * It is permissioned to the `pauser` address, which is expected to be a low threshold multisig.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only pause functionality, and thus cannot 'unflip' any bit in `_paused` from 1 to 0.
     */
    function pause(uint256 newPausedStatus) external;
    /**
     * @notice Alias for `pause(type(uint256).max)`.
     */
    function pauseAll() external;
    /**
     * @notice This function is used to unpause an EigenLayer contract's functionality.
     * It is permissioned to the `unpauser` address, which is expected to be a high threshold multisig or governance contract.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only unpause functionality, and thus cannot 'flip' any bit in `_paused` from 0 to 1.
     */
    function unpause(uint256 newPausedStatus) external;
    /// @notice Returns the current paused status as a uint256.
    function paused() external view returns (uint256);
    /// @notice Returns 'true' if the `indexed`th bit of `_paused` is 1, and 'false' otherwise
    function paused(uint8 index) external view returns (bool);
    /// @notice Allows the unpauser to set a new pauser registry
    function setPauserRegistry(IPauserRegistry newPauserRegistry) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
/**
 * @title Constants shared between 'EigenPod' and 'EigenPodManager' contracts.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
abstract contract EigenPodPausingConstants {
    /// @notice Index for flag that pauses creation of new EigenPods when set. See EigenPodManager code for details.
    uint8 internal constant PAUSED_NEW_EIGENPODS = 0;
    /**
     * @notice Index for flag that pauses all withdrawal-of-restaked ETH related functionality `
     * function *of the EigenPodManager* when set. See EigenPodManager code for details.
     */
    uint8 internal constant PAUSED_WITHDRAW_RESTAKED_ETH = 1;
    /// @notice Index for flag that pauses the deposit related functions *of the EigenPods* when set. see EigenPod code for details.
    uint8 internal constant PAUSED_EIGENPODS_VERIFY_CREDENTIALS = 2;
    // Deprecated
    // uint8 internal constant PAUSED_EIGENPODS_VERIFY_BALANCE_UPDATE = 3;
    // Deprecated
    // uint8 internal constant PAUSED_EIGENPODS_VERIFY_WITHDRAWAL = 4;
    /// @notice Pausability for EigenPod's "accidental transfer" withdrawal methods
    uint8 internal constant PAUSED_NON_PROOF_WITHDRAWALS = 5;
    uint8 internal constant PAUSED_START_CHECKPOINT = 6;
    /// @notice Index for flag that pauses the `verifyCheckpointProofs` function *of the EigenPods* when set. see EigenPod code for details.
    uint8 internal constant PAUSED_EIGENPODS_VERIFY_CHECKPOINT_PROOFS = 7;
    uint8 internal constant PAUSED_VERIFY_STALE_BALANCE = 8;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
import "../interfaces/IEigenPod.sol";
abstract contract EigenPodStorage is IEigenPod {
    /// @notice The owner of this EigenPod
    address public podOwner;
    /// @notice DEPRECATED: previously used to track the time when restaking was activated
    uint64 internal __deprecated_mostRecentWithdrawalTimestamp;
    /// @notice the amount of execution layer ETH in this contract that is staked in EigenLayer (i.e. withdrawn from the Beacon Chain but not from EigenLayer),
    uint64 public withdrawableRestakedExecutionLayerGwei;
    /// @notice DEPRECATED: previously used to track whether a pod had activated restaking
    bool internal __deprecated_hasRestaked;
    /// @notice DEPRECATED: previously tracked withdrawals proven per validator
    mapping(bytes32 => mapping(uint64 => bool)) internal __deprecated_provenWithdrawal;
    /// @notice This is a mapping that tracks a validator's information by their pubkey hash
    mapping(bytes32 => ValidatorInfo) internal _validatorPubkeyHashToInfo;
    /// @notice DEPRECATED: previously used to track ETH sent to the fallback function
    uint256 internal __deprecated_nonBeaconChainETHBalanceWei;
    /// @notice DEPRECATED: previously used to track claimed partial withdrawals
    uint64 __deprecated_sumOfPartialWithdrawalsClaimedGwei;
    /// @notice Number of validators with proven withdrawal credentials, who do not have proven full withdrawals
    uint256 public activeValidatorCount;
    /// @notice The timestamp of the last checkpoint finalized
    uint64 public lastCheckpointTimestamp;
    /// @notice The timestamp of the currently-active checkpoint. Will be 0 if there is not active checkpoint
    uint64 public currentCheckpointTimestamp;
    /// @notice For each checkpoint, the total balance attributed to exited validators, in gwei
    ///
    /// NOTE that the values added to this mapping are NOT guaranteed to capture the entirety of a validator's
    /// exit - rather, they capture the total change in a validator's balance when a checkpoint shows their
    /// balance change from nonzero to zero. While a change from nonzero to zero DOES guarantee that a validator
    /// has been fully exited, it is possible that the magnitude of this change does not capture what is
    /// typically thought of as a "full exit."
    ///
    /// For example:
    /// 1. Consider a validator was last checkpointed at 32 ETH before exiting. Once the exit has been processed,
    /// it is expected that the validator's exited balance is calculated to be `32 ETH`.
    /// 2. However, before `startCheckpoint` is called, a deposit is made to the validator for 1 ETH. The beacon
    /// chain will automatically withdraw this ETH, but not until the withdrawal sweep passes over the validator
    /// again. Until this occurs, the validator's current balance (used for checkpointing) is 1 ETH.
    /// 3. If `startCheckpoint` is called at this point, the balance delta calculated for this validator will be
    /// `-31 ETH`, and because the validator has a nonzero balance, it is not marked WITHDRAWN.
    /// 4. After the exit is processed by the beacon chain, a subsequent `startCheckpoint` and checkpoint proof
    /// will calculate a balance delta of `-1 ETH` and attribute a 1 ETH exit to the validator.
    ///
    /// If this edge case impacts your usecase, it should be possible to mitigate this by monitoring for deposits
    /// to your exited validators, and waiting to call `startCheckpoint` until those deposits have been automatically
    /// exited.
    ///
    /// Additional edge cases this mapping does not cover:
    /// - If a validator is slashed, their balance exited will reflect their original balance rather than the slashed amount
    /// - The final partial withdrawal for an exited validator will be likely be included in this mapping.
    ///   i.e. if a validator was last checkpointed at 32.1 ETH before exiting, the next checkpoint will calculate their
    ///   "exited" amount to be 32.1 ETH rather than 32 ETH.
    mapping(uint64 => uint64) public checkpointBalanceExitedGwei;
    /// @notice The current checkpoint, if there is one active
    Checkpoint internal _currentCheckpoint;
    /// @notice An address with permissions to call `startCheckpoint` and `verifyWithdrawalCredentials`, set
    /// by the podOwner. This role exists to allow a podOwner to designate a hot wallet that can call
    /// these methods, allowing the podOwner to remain a cold wallet that is only used to manage funds.
    /// @dev If this address is NOT set, only the podOwner can call `startCheckpoint` and `verifyWithdrawalCredentials`
    address public proofSubmitter;
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[36] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// Adapted from OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library Merkle {
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * Note this is for a Merkle tree using the keccak/sha3 hash function
     */
    function verifyInclusionKeccak(
        bytes memory proof,
        bytes32 root,
        bytes32 leaf,
        uint256 index
    ) internal pure returns (bool) {
        return processInclusionProofKeccak(proof, leaf, index) == root;
    }
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     * @dev If the proof length is 0 then the leaf hash is returned.
     *
     * _Available since v4.4._
     *
     * Note this is for a Merkle tree using the keccak/sha3 hash function
     */
    function processInclusionProofKeccak(
        bytes memory proof,
        bytes32 leaf,
        uint256 index
    ) internal pure returns (bytes32) {
        require(proof.length % 32 == 0, "Merkle.processInclusionProofKeccak: proof length should be a multiple of 32");
        bytes32 computedHash = leaf;
        for (uint256 i = 32; i <= proof.length; i += 32) {
            if (index % 2 == 0) {
                // if ith bit of index is 0, then computedHash is a left sibling
                assembly {
                    mstore(0x00, computedHash)
                    mstore(0x20, mload(add(proof, i)))
                    computedHash := keccak256(0x00, 0x40)
                    index := div(index, 2)
                }
            } else {
                // if ith bit of index is 1, then computedHash is a right sibling
                assembly {
                    mstore(0x00, mload(add(proof, i)))
                    mstore(0x20, computedHash)
                    computedHash := keccak256(0x00, 0x40)
                    index := div(index, 2)
                }
            }
        }
        return computedHash;
    }
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * Note this is for a Merkle tree using the sha256 hash function
     */
    function verifyInclusionSha256(
        bytes memory proof,
        bytes32 root,
        bytes32 leaf,
        uint256 index
    ) internal view returns (bool) {
        return processInclusionProofSha256(proof, leaf, index) == root;
    }
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * _Available since v4.4._
     *
     * Note this is for a Merkle tree using the sha256 hash function
     */
    function processInclusionProofSha256(
        bytes memory proof,
        bytes32 leaf,
        uint256 index
    ) internal view returns (bytes32) {
        require(
            proof.length != 0 && proof.length % 32 == 0,
            "Merkle.processInclusionProofSha256: proof length should be a non-zero multiple of 32"
        );
        bytes32[1] memory computedHash = [leaf];
        for (uint256 i = 32; i <= proof.length; i += 32) {
            if (index % 2 == 0) {
                // if ith bit of index is 0, then computedHash is a left sibling
                assembly {
                    mstore(0x00, mload(computedHash))
                    mstore(0x20, mload(add(proof, i)))
                    if iszero(staticcall(sub(gas(), 2000), 2, 0x00, 0x40, computedHash, 0x20)) { revert(0, 0) }
                    index := div(index, 2)
                }
            } else {
                // if ith bit of index is 1, then computedHash is a right sibling
                assembly {
                    mstore(0x00, mload(add(proof, i)))
                    mstore(0x20, mload(computedHash))
                    if iszero(staticcall(sub(gas(), 2000), 2, 0x00, 0x40, computedHash, 0x20)) { revert(0, 0) }
                    index := div(index, 2)
                }
            }
        }
        return computedHash[0];
    }
    /**
     * @notice this function returns the merkle root of a tree created from a set of leaves using sha256 as its hash function
     *  @param leaves the leaves of the merkle tree
     *  @return The computed Merkle root of the tree.
     *  @dev A pre-condition to this function is that leaves.length is a power of two.  If not, the function will merkleize the inputs incorrectly.
     */
    function merkleizeSha256(bytes32[] memory leaves) internal pure returns (bytes32) {
        //there are half as many nodes in the layer above the leaves
        uint256 numNodesInLayer = leaves.length / 2;
        //create a layer to store the internal nodes
        bytes32[] memory layer = new bytes32[](numNodesInLayer);
        //fill the layer with the pairwise hashes of the leaves
        for (uint256 i = 0; i < numNodesInLayer; i++) {
            layer[i] = sha256(abi.encodePacked(leaves[2 * i], leaves[2 * i + 1]));
        }
        //the next layer above has half as many nodes
        numNodesInLayer /= 2;
        //while we haven't computed the root
        while (numNodesInLayer != 0) {
            //overwrite the first numNodesInLayer nodes in layer with the pairwise hashes of their children
            for (uint256 i = 0; i < numNodesInLayer; i++) {
                layer[i] = sha256(abi.encodePacked(layer[2 * i], layer[2 * i + 1]));
            }
            //the next layer above has half as many nodes
            numNodesInLayer /= 2;
        }
        //the first node in the layer is the root
        return layer[0];
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library Endian {
    /**
     * @notice Converts a little endian-formatted uint64 to a big endian-formatted uint64
     * @param lenum little endian-formatted uint64 input, provided as 'bytes32' type
     * @return n The big endian-formatted uint64
     * @dev Note that the input is formatted as a 'bytes32' type (i.e. 256 bits), but it is immediately truncated to a uint64 (i.e. 64 bits)
     * through a right-shift/shr operation.
     */
    function fromLittleEndianUint64(bytes32 lenum) internal pure returns (uint64 n) {
        // the number needs to be stored in little-endian encoding (ie in bytes 0-8)
        n = uint64(uint256(lenum >> 192));
        // forgefmt: disable-next-item
        return (n >> 56) | 
            ((0x00FF000000000000 & n) >> 40) | 
            ((0x0000FF0000000000 & n) >> 24) | 
            ((0x000000FF00000000 & n) >> 8)  | 
            ((0x00000000FF000000 & n) << 8)  | 
            ((0x0000000000FF0000 & n) << 24) | 
            ((0x000000000000FF00 & n) << 40) | 
            ((0x00000000000000FF & n) << 56);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./IStrategy.sol";
import "./ISlasher.sol";
import "./IDelegationManager.sol";
import "./IEigenPodManager.sol";
/**
 * @title Interface for the primary entrypoint for funds into EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice See the `StrategyManager` contract itself for implementation details.
 */
interface IStrategyManager {
    /**
     * @notice Emitted when a new deposit occurs on behalf of `staker`.
     * @param staker Is the staker who is depositing funds into EigenLayer.
     * @param strategy Is the strategy that `staker` has deposited into.
     * @param token Is the token that `staker` deposited.
     * @param shares Is the number of new shares `staker` has been granted in `strategy`.
     */
    event Deposit(address staker, IERC20 token, IStrategy strategy, uint256 shares);
    /// @notice Emitted when `thirdPartyTransfersForbidden` is updated for a strategy and value by the owner
    event UpdatedThirdPartyTransfersForbidden(IStrategy strategy, bool value);
    /// @notice Emitted when the `strategyWhitelister` is changed
    event StrategyWhitelisterChanged(address previousAddress, address newAddress);
    /// @notice Emitted when a strategy is added to the approved list of strategies for deposit
    event StrategyAddedToDepositWhitelist(IStrategy strategy);
    /// @notice Emitted when a strategy is removed from the approved list of strategies for deposit
    event StrategyRemovedFromDepositWhitelist(IStrategy strategy);
    /**
     * @notice Deposits `amount` of `token` into the specified `strategy`, with the resultant shares credited to `msg.sender`
     * @param strategy is the specified strategy where deposit is to be made,
     * @param token is the denomination in which the deposit is to be made,
     * @param amount is the amount of token to be deposited in the strategy by the staker
     * @return shares The amount of new shares in the `strategy` created as part of the action.
     * @dev The `msg.sender` must have previously approved this contract to transfer at least `amount` of `token` on their behalf.
     * @dev Cannot be called by an address that is 'frozen' (this function will revert if the `msg.sender` is frozen).
     *
     * WARNING: Depositing tokens that allow reentrancy (eg. ERC-777) into a strategy is not recommended.  This can lead to attack vectors
     *          where the token balance and corresponding strategy shares are not in sync upon reentrancy.
     */
    function depositIntoStrategy(IStrategy strategy, IERC20 token, uint256 amount) external returns (uint256 shares);
    /**
     * @notice Used for depositing an asset into the specified strategy with the resultant shares credited to `staker`,
     * who must sign off on the action.
     * Note that the assets are transferred out/from the `msg.sender`, not from the `staker`; this function is explicitly designed
     * purely to help one address deposit 'for' another.
     * @param strategy is the specified strategy where deposit is to be made,
     * @param token is the denomination in which the deposit is to be made,
     * @param amount is the amount of token to be deposited in the strategy by the staker
     * @param staker the staker that the deposited assets will be credited to
     * @param expiry the timestamp at which the signature expires
     * @param signature is a valid signature from the `staker`. either an ECDSA signature if the `staker` is an EOA, or data to forward
     * following EIP-1271 if the `staker` is a contract
     * @return shares The amount of new shares in the `strategy` created as part of the action.
     * @dev The `msg.sender` must have previously approved this contract to transfer at least `amount` of `token` on their behalf.
     * @dev A signature is required for this function to eliminate the possibility of griefing attacks, specifically those
     * targeting stakers who may be attempting to undelegate.
     * @dev Cannot be called if thirdPartyTransfersForbidden is set to true for this strategy
     *
     *  WARNING: Depositing tokens that allow reentrancy (eg. ERC-777) into a strategy is not recommended.  This can lead to attack vectors
     *          where the token balance and corresponding strategy shares are not in sync upon reentrancy
     */
    function depositIntoStrategyWithSignature(
        IStrategy strategy,
        IERC20 token,
        uint256 amount,
        address staker,
        uint256 expiry,
        bytes memory signature
    ) external returns (uint256 shares);
    /// @notice Used by the DelegationManager to remove a Staker's shares from a particular strategy when entering the withdrawal queue
    function removeShares(address staker, IStrategy strategy, uint256 shares) external;
    /// @notice Used by the DelegationManager to award a Staker some shares that have passed through the withdrawal queue
    function addShares(address staker, IERC20 token, IStrategy strategy, uint256 shares) external;
    /// @notice Used by the DelegationManager to convert withdrawn shares to tokens and send them to a recipient
    function withdrawSharesAsTokens(address recipient, IStrategy strategy, uint256 shares, IERC20 token) external;
    /// @notice Returns the current shares of `user` in `strategy`
    function stakerStrategyShares(address user, IStrategy strategy) external view returns (uint256 shares);
    /**
     * @notice Get all details on the staker's deposits and corresponding shares
     * @return (staker's strategies, shares in these strategies)
     */
    function getDeposits(address staker) external view returns (IStrategy[] memory, uint256[] memory);
    /// @notice Simple getter function that returns `stakerStrategyList[staker].length`.
    function stakerStrategyListLength(address staker) external view returns (uint256);
    /**
     * @notice Owner-only function that adds the provided Strategies to the 'whitelist' of strategies that stakers can deposit into
     * @param strategiesToWhitelist Strategies that will be added to the `strategyIsWhitelistedForDeposit` mapping (if they aren't in it already)
     * @param thirdPartyTransfersForbiddenValues bool values to set `thirdPartyTransfersForbidden` to for each strategy
     */
    function addStrategiesToDepositWhitelist(
        IStrategy[] calldata strategiesToWhitelist,
        bool[] calldata thirdPartyTransfersForbiddenValues
    ) external;
    /**
     * @notice Owner-only function that removes the provided Strategies from the 'whitelist' of strategies that stakers can deposit into
     * @param strategiesToRemoveFromWhitelist Strategies that will be removed to the `strategyIsWhitelistedForDeposit` mapping (if they are in it)
     */
    function removeStrategiesFromDepositWhitelist(IStrategy[] calldata strategiesToRemoveFromWhitelist) external;
    /**
     * If true for a strategy, a user cannot depositIntoStrategyWithSignature into that strategy for another staker
     * and also when performing DelegationManager.queueWithdrawals, a staker can only withdraw to themselves.
     * Defaulted to false for all existing strategies.
     * @param strategy The strategy to set `thirdPartyTransfersForbidden` value to
     * @param value bool value to set `thirdPartyTransfersForbidden` to
     */
    function setThirdPartyTransfersForbidden(IStrategy strategy, bool value) external;
    /// @notice Returns the single, central Delegation contract of EigenLayer
    function delegation() external view returns (IDelegationManager);
    /// @notice Returns the single, central Slasher contract of EigenLayer
    function slasher() external view returns (ISlasher);
    /// @notice Returns the EigenPodManager contract of EigenLayer
    function eigenPodManager() external view returns (IEigenPodManager);
    /// @notice Returns the address of the `strategyWhitelister`
    function strategyWhitelister() external view returns (address);
    /// @notice Returns bool for whether or not `strategy` is whitelisted for deposit
    function strategyIsWhitelistedForDeposit(IStrategy strategy) external view returns (bool);
    /**
     * @notice Returns bool for whether or not `strategy` enables credit transfers. i.e enabling
     * depositIntoStrategyWithSignature calls or queueing withdrawals to a different address than the staker.
     */
    function thirdPartyTransfersForbidden(IStrategy strategy) external view returns (bool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "../libraries/BeaconChainProofs.sol";
import "./IEigenPodManager.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
 * @title The implementation contract used for restaking beacon chain ETH on EigenLayer
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @dev Note that all beacon chain balances are stored as gwei within the beacon chain datastructures. We choose
 *   to account balances in terms of gwei in the EigenPod contract and convert to wei when making calls to other contracts
 */
interface IEigenPod {
    /**
     *
     *                                STRUCTS / ENUMS
     *
     */
    enum VALIDATOR_STATUS {
        INACTIVE, // doesnt exist
        ACTIVE, // staked on ethpos and withdrawal credentials are pointed to the EigenPod
        WITHDRAWN // withdrawn from the Beacon Chain
    }
    struct ValidatorInfo {
        // index of the validator in the beacon chain
        uint64 validatorIndex;
        // amount of beacon chain ETH restaked on EigenLayer in gwei
        uint64 restakedBalanceGwei;
        //timestamp of the validator's most recent balance update
        uint64 lastCheckpointedAt;
        // status of the validator
        VALIDATOR_STATUS status;
    }
    struct Checkpoint {
        bytes32 beaconBlockRoot;
        uint24 proofsRemaining;
        uint64 podBalanceGwei;
        int128 balanceDeltasGwei;
    }
    /**
     *
     *                                    EVENTS
     *
     */
    /// @notice Emitted when an ETH validator stakes via this eigenPod
    event EigenPodStaked(bytes pubkey);
    /// @notice Emitted when a pod owner updates the proof submitter address
    event ProofSubmitterUpdated(address prevProofSubmitter, address newProofSubmitter);
    /// @notice Emitted when an ETH validator's withdrawal credentials are successfully verified to be pointed to this eigenPod
    event ValidatorRestaked(uint40 validatorIndex);
    /// @notice Emitted when an ETH validator's  balance is proven to be updated.  Here newValidatorBalanceGwei
    //  is the validator's balance that is credited on EigenLayer.
    event ValidatorBalanceUpdated(uint40 validatorIndex, uint64 balanceTimestamp, uint64 newValidatorBalanceGwei);
    /// @notice Emitted when restaked beacon chain ETH is withdrawn from the eigenPod.
    event RestakedBeaconChainETHWithdrawn(address indexed recipient, uint256 amount);
    /// @notice Emitted when ETH is received via the `receive` fallback
    event NonBeaconChainETHReceived(uint256 amountReceived);
    /// @notice Emitted when a checkpoint is created
    event CheckpointCreated(
        uint64 indexed checkpointTimestamp, bytes32 indexed beaconBlockRoot, uint256 validatorCount
    );
    /// @notice Emitted when a checkpoint is finalized
    event CheckpointFinalized(uint64 indexed checkpointTimestamp, int256 totalShareDeltaWei);
    /// @notice Emitted when a validator is proven for a given checkpoint
    event ValidatorCheckpointed(uint64 indexed checkpointTimestamp, uint40 indexed validatorIndex);
    /// @notice Emitted when a validaor is proven to have 0 balance at a given checkpoint
    event ValidatorWithdrawn(uint64 indexed checkpointTimestamp, uint40 indexed validatorIndex);
    /**
     *
     *                       EXTERNAL STATE-CHANGING METHODS
     *
     */
    /// @notice Used to initialize the pointers to contracts crucial to the pod's functionality, in beacon proxy construction from EigenPodManager
    function initialize(address owner) external;
    /// @notice Called by EigenPodManager when the owner wants to create another ETH validator.
    function stake(bytes calldata pubkey, bytes calldata signature, bytes32 depositDataRoot) external payable;
    /**
     * @notice Transfers `amountWei` in ether from this contract to the specified `recipient` address
     * @notice Called by EigenPodManager to withdrawBeaconChainETH that has been added to the EigenPod's balance due to a withdrawal from the beacon chain.
     * @dev The podOwner must have already proved sufficient withdrawals, so that this pod's `withdrawableRestakedExecutionLayerGwei` exceeds the
     * `amountWei` input (when converted to GWEI).
     * @dev Reverts if `amountWei` is not a whole Gwei amount
     */
    function withdrawRestakedBeaconChainETH(address recipient, uint256 amount) external;
    /**
     * @dev Create a checkpoint used to prove this pod's active validator set. Checkpoints are completed
     * by submitting one checkpoint proof per ACTIVE validator. During the checkpoint process, the total
     * change in ACTIVE validator balance is tracked, and any validators with 0 balance are marked `WITHDRAWN`.
     * @dev Once finalized, the pod owner is awarded shares corresponding to:
     * - the total change in their ACTIVE validator balances
     * - any ETH in the pod not already awarded shares
     * @dev A checkpoint cannot be created if the pod already has an outstanding checkpoint. If
     * this is the case, the pod owner MUST complete the existing checkpoint before starting a new one.
     * @param revertIfNoBalance Forces a revert if the pod ETH balance is 0. This allows the pod owner
     * to prevent accidentally starting a checkpoint that will not increase their shares
     */
    function startCheckpoint(bool revertIfNoBalance) external;
    /**
     * @dev Progress the current checkpoint towards completion by submitting one or more validator
     * checkpoint proofs. Anyone can call this method to submit proofs towards the current checkpoint.
     * For each validator proven, the current checkpoint's `proofsRemaining` decreases.
     * @dev If the checkpoint's `proofsRemaining` reaches 0, the checkpoint is finalized.
     * (see `_updateCheckpoint` for more details)
     * @dev This method can only be called when there is a currently-active checkpoint.
     * @param balanceContainerProof proves the beacon's current balance container root against a checkpoint's `beaconBlockRoot`
     * @param proofs Proofs for one or more validator current balances against the `balanceContainerRoot`
     */
    function verifyCheckpointProofs(
        BeaconChainProofs.BalanceContainerProof calldata balanceContainerProof,
        BeaconChainProofs.BalanceProof[] calldata proofs
    ) external;
    /**
     * @dev Verify one or more validators have their withdrawal credentials pointed at this EigenPod, and award
     * shares based on their effective balance. Proven validators are marked `ACTIVE` within the EigenPod, and
     * future checkpoint proofs will need to include them.
     * @dev Withdrawal credential proofs MUST NOT be older than `currentCheckpointTimestamp`.
     * @dev Validators proven via this method MUST NOT have an exit epoch set already.
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param validatorIndices a list of validator indices being proven
     * @param validatorFieldsProofs proofs of each validator's `validatorFields` against the beacon state root
     * @param validatorFields the fields of the beacon chain "Validator" container. See consensus specs for
     * details: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     */
    function verifyWithdrawalCredentials(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        uint40[] calldata validatorIndices,
        bytes[] calldata validatorFieldsProofs,
        bytes32[][] calldata validatorFields
    ) external;
    /**
     * @dev Prove that one of this pod's active validators was slashed on the beacon chain. A successful
     * staleness proof allows the caller to start a checkpoint.
     *
     * @dev Note that in order to start a checkpoint, any existing checkpoint must already be completed!
     * (See `_startCheckpoint` for details)
     *
     * @dev Note that this method allows anyone to start a checkpoint as soon as a slashing occurs on the beacon
     * chain. This is intended to make it easier to external watchers to keep a pod's balance up to date.
     *
     * @dev Note too that beacon chain slashings are not instant. There is a delay between the initial slashing event
     * and the validator's final exit back to the execution layer. During this time, the validator's balance may or
     * may not drop further due to a correlation penalty. This method allows proof of a slashed validator
     * to initiate a checkpoint for as long as the validator remains on the beacon chain. Once the validator
     * has exited and been checkpointed at 0 balance, they are no longer "checkpoint-able" and cannot be proven
     * "stale" via this method.
     * See https://eth2book.info/capella/part3/transition/epoch/#slashings for more info.
     *
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param proof the fields of the beacon chain "Validator" container, along with a merkle proof against
     * the beacon state root. See the consensus specs for more details:
     * https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     *
     * @dev Staleness conditions:
     * - Validator's last checkpoint is older than `beaconTimestamp`
     * - Validator MUST be in `ACTIVE` status in the pod
     * - Validator MUST be slashed on the beacon chain
     */
    function verifyStaleBalance(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        BeaconChainProofs.ValidatorProof calldata proof
    ) external;
    /// @notice called by owner of a pod to remove any ERC20s deposited in the pod
    function recoverTokens(IERC20[] memory tokenList, uint256[] memory amountsToWithdraw, address recipient) external;
    /// @notice Allows the owner of a pod to update the proof submitter, a permissioned
    /// address that can call `startCheckpoint` and `verifyWithdrawalCredentials`.
    /// @dev Note that EITHER the podOwner OR proofSubmitter can access these methods,
    /// so it's fine to set your proofSubmitter to 0 if you want the podOwner to be the
    /// only address that can call these methods.
    /// @param newProofSubmitter The new proof submitter address. If set to 0, only the
    /// pod owner will be able to call `startCheckpoint` and `verifyWithdrawalCredentials`
    function setProofSubmitter(address newProofSubmitter) external;
    /**
     *
     *                                VIEW METHODS
     *
     */
    /// @notice An address with permissions to call `startCheckpoint` and `verifyWithdrawalCredentials`, set
    /// by the podOwner. This role exists to allow a podOwner to designate a hot wallet that can call
    /// these methods, allowing the podOwner to remain a cold wallet that is only used to manage funds.
    /// @dev If this address is NOT set, only the podOwner can call `startCheckpoint` and `verifyWithdrawalCredentials`
    function proofSubmitter() external view returns (address);
    /// @notice the amount of execution layer ETH in this contract that is staked in EigenLayer (i.e. withdrawn from beaconchain but not EigenLayer),
    function withdrawableRestakedExecutionLayerGwei() external view returns (uint64);
    /// @notice The single EigenPodManager for EigenLayer
    function eigenPodManager() external view returns (IEigenPodManager);
    /// @notice The owner of this EigenPod
    function podOwner() external view returns (address);
    /// @notice Returns the validatorInfo struct for the provided pubkeyHash
    function validatorPubkeyHashToInfo(bytes32 validatorPubkeyHash) external view returns (ValidatorInfo memory);
    /// @notice Returns the validatorInfo struct for the provided pubkey
    function validatorPubkeyToInfo(bytes calldata validatorPubkey) external view returns (ValidatorInfo memory);
    /// @notice This returns the status of a given validator
    function validatorStatus(bytes32 pubkeyHash) external view returns (VALIDATOR_STATUS);
    /// @notice This returns the status of a given validator pubkey
    function validatorStatus(bytes calldata validatorPubkey) external view returns (VALIDATOR_STATUS);
    /// @notice Number of validators with proven withdrawal credentials, who do not have proven full withdrawals
    function activeValidatorCount() external view returns (uint256);
    /// @notice The timestamp of the last checkpoint finalized
    function lastCheckpointTimestamp() external view returns (uint64);
    /// @notice The timestamp of the currently-active checkpoint. Will be 0 if there is not active checkpoint
    function currentCheckpointTimestamp() external view returns (uint64);
    /// @notice Returns the currently-active checkpoint
    function currentCheckpoint() external view returns (Checkpoint memory);
    /// @notice For each checkpoint, the total balance attributed to exited validators, in gwei
    ///
    /// NOTE that the values added to this mapping are NOT guaranteed to capture the entirety of a validator's
    /// exit - rather, they capture the total change in a validator's balance when a checkpoint shows their
    /// balance change from nonzero to zero. While a change from nonzero to zero DOES guarantee that a validator
    /// has been fully exited, it is possible that the magnitude of this change does not capture what is
    /// typically thought of as a "full exit."
    ///
    /// For example:
    /// 1. Consider a validator was last checkpointed at 32 ETH before exiting. Once the exit has been processed,
    /// it is expected that the validator's exited balance is calculated to be `32 ETH`.
    /// 2. However, before `startCheckpoint` is called, a deposit is made to the validator for 1 ETH. The beacon
    /// chain will automatically withdraw this ETH, but not until the withdrawal sweep passes over the validator
    /// again. Until this occurs, the validator's current balance (used for checkpointing) is 1 ETH.
    /// 3. If `startCheckpoint` is called at this point, the balance delta calculated for this validator will be
    /// `-31 ETH`, and because the validator has a nonzero balance, it is not marked WITHDRAWN.
    /// 4. After the exit is processed by the beacon chain, a subsequent `startCheckpoint` and checkpoint proof
    /// will calculate a balance delta of `-1 ETH` and attribute a 1 ETH exit to the validator.
    ///
    /// If this edge case impacts your usecase, it should be possible to mitigate this by monitoring for deposits
    /// to your exited validators, and waiting to call `startCheckpoint` until those deposits have been automatically
    /// exited.
    ///
    /// Additional edge cases this mapping does not cover:
    /// - If a validator is slashed, their balance exited will reflect their original balance rather than the slashed amount
    /// - The final partial withdrawal for an exited validator will be likely be included in this mapping.
    ///   i.e. if a validator was last checkpointed at 32.1 ETH before exiting, the next checkpoint will calculate their
    ///   "exited" amount to be 32.1 ETH rather than 32 ETH.
    function checkpointBalanceExitedGwei(uint64) external view returns (uint64);
    /// @notice Query the 4788 oracle to get the parent block root of the slot with the given `timestamp`
    /// @param timestamp of the block for which the parent block root will be returned. MUST correspond
    /// to an existing slot within the last 24 hours. If the slot at `timestamp` was skipped, this method
    /// will revert.
    function getParentBlockRoot(uint64 timestamp) external view returns (bytes32);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./IStrategyManager.sol";
import "./IDelegationManager.sol";
/**
 * @title Interface for the primary 'slashing' contract for EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice See the `Slasher` contract itself for implementation details.
 */
interface ISlasher {
    // struct used to store information about the current state of an operator's obligations to middlewares they are serving
    struct MiddlewareTimes {
        // The update block for the middleware whose most recent update was earliest, i.e. the 'stalest' update out of all middlewares the operator is serving
        uint32 stalestUpdateBlock;
        // The latest 'serveUntilBlock' from all of the middleware that the operator is serving
        uint32 latestServeUntilBlock;
    }
    // struct used to store details relevant to a single middleware that an operator has opted-in to serving
    struct MiddlewareDetails {
        // the block at which the contract begins being able to finalize the operator's registration with the service via calling `recordFirstStakeUpdate`
        uint32 registrationMayBeginAtBlock;
        // the block before which the contract is allowed to slash the user
        uint32 contractCanSlashOperatorUntilBlock;
        // the block at which the middleware's view of the operator's stake was most recently updated
        uint32 latestUpdateBlock;
    }
    /// @notice Emitted when a middleware times is added to `operator`'s array.
    event MiddlewareTimesAdded(
        address operator, uint256 index, uint32 stalestUpdateBlock, uint32 latestServeUntilBlock
    );
    /// @notice Emitted when `operator` begins to allow `contractAddress` to slash them.
    event OptedIntoSlashing(address indexed operator, address indexed contractAddress);
    /// @notice Emitted when `contractAddress` signals that it will no longer be able to slash `operator` after the `contractCanSlashOperatorUntilBlock`.
    event SlashingAbilityRevoked(
        address indexed operator, address indexed contractAddress, uint32 contractCanSlashOperatorUntilBlock
    );
    /**
     * @notice Emitted when `slashingContract` 'freezes' the `slashedOperator`.
     * @dev The `slashingContract` must have permission to slash the `slashedOperator`, i.e. `canSlash(slasherOperator, slashingContract)` must return 'true'.
     */
    event OperatorFrozen(address indexed slashedOperator, address indexed slashingContract);
    /// @notice Emitted when `previouslySlashedAddress` is 'unfrozen', allowing them to again move deposited funds within EigenLayer.
    event FrozenStatusReset(address indexed previouslySlashedAddress);
    /**
     * @notice Gives the `contractAddress` permission to slash the funds of the caller.
     * @dev Typically, this function must be called prior to registering for a middleware.
     */
    function optIntoSlashing(address contractAddress) external;
    /**
     * @notice Used for 'slashing' a certain operator.
     * @param toBeFrozen The operator to be frozen.
     * @dev Technically the operator is 'frozen' (hence the name of this function), and then subject to slashing pending a decision by a human-in-the-loop.
     * @dev The operator must have previously given the caller (which should be a contract) the ability to slash them, through a call to `optIntoSlashing`.
     */
    function freezeOperator(address toBeFrozen) external;
    /**
     * @notice Removes the 'frozen' status from each of the `frozenAddresses`
     * @dev Callable only by the contract owner (i.e. governance).
     */
    function resetFrozenStatus(address[] calldata frozenAddresses) external;
    /**
     * @notice this function is a called by middlewares during an operator's registration to make sure the operator's stake at registration
     *         is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at the current block is slashable
     * @dev adds the middleware's slashing contract to the operator's linked list
     */
    function recordFirstStakeUpdate(address operator, uint32 serveUntilBlock) external;
    /**
     * @notice this function is a called by middlewares during a stake update for an operator (perhaps to free pending withdrawals)
     *         to make sure the operator's stake at updateBlock is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param updateBlock the block for which the stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at updateBlock is slashable
     * @param insertAfter the element of the operators linked list that the currently updating middleware should be inserted after
     * @dev insertAfter should be calculated offchain before making the transaction that calls this. this is subject to race conditions,
     *      but it is anticipated to be rare and not detrimental.
     */
    function recordStakeUpdate(
        address operator,
        uint32 updateBlock,
        uint32 serveUntilBlock,
        uint256 insertAfter
    ) external;
    /**
     * @notice this function is a called by middlewares during an operator's deregistration to make sure the operator's stake at deregistration
     *         is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at the current block is slashable
     * @dev removes the middleware's slashing contract to the operator's linked list and revokes the middleware's (i.e. caller's) ability to
     * slash `operator` once `serveUntil` is reached
     */
    function recordLastStakeUpdateAndRevokeSlashingAbility(address operator, uint32 serveUntilBlock) external;
    /// @notice The StrategyManager contract of EigenLayer
    function strategyManager() external view returns (IStrategyManager);
    /// @notice The DelegationManager contract of EigenLayer
    function delegation() external view returns (IDelegationManager);
    /**
     * @notice Used to determine whether `staker` is actively 'frozen'. If a staker is frozen, then they are potentially subject to
     * slashing of their funds, and cannot cannot deposit or withdraw from the strategyManager until the slashing process is completed
     * and the staker's status is reset (to 'unfrozen').
     * @param staker The staker of interest.
     * @return Returns 'true' if `staker` themselves has their status set to frozen, OR if the staker is delegated
     * to an operator who has their status set to frozen. Otherwise returns 'false'.
     */
    function isFrozen(address staker) external view returns (bool);
    /// @notice Returns true if `slashingContract` is currently allowed to slash `toBeSlashed`.
    function canSlash(address toBeSlashed, address slashingContract) external view returns (bool);
    /// @notice Returns the block until which `serviceContract` is allowed to slash the `operator`.
    function contractCanSlashOperatorUntilBlock(
        address operator,
        address serviceContract
    ) external view returns (uint32);
    /// @notice Returns the block at which the `serviceContract` last updated its view of the `operator`'s stake
    function latestUpdateBlock(address operator, address serviceContract) external view returns (uint32);
    /// @notice A search routine for finding the correct input value of `insertAfter` to `recordStakeUpdate` / `_updateMiddlewareList`.
    function getCorrectValueForInsertAfter(address operator, uint32 updateBlock) external view returns (uint256);
    /**
     * @notice Returns 'true' if `operator` can currently complete a withdrawal started at the `withdrawalStartBlock`, with `middlewareTimesIndex` used
     * to specify the index of a `MiddlewareTimes` struct in the operator's list (i.e. an index in `operatorToMiddlewareTimes[operator]`). The specified
     * struct is consulted as proof of the `operator`'s ability (or lack thereof) to complete the withdrawal.
     * This function will return 'false' if the operator cannot currently complete a withdrawal started at the `withdrawalStartBlock`, *or* in the event
     * that an incorrect `middlewareTimesIndex` is supplied, even if one or more correct inputs exist.
     * @param operator Either the operator who queued the withdrawal themselves, or if the withdrawing party is a staker who delegated to an operator,
     * this address is the operator *who the staker was delegated to* at the time of the `withdrawalStartBlock`.
     * @param withdrawalStartBlock The block number at which the withdrawal was initiated.
     * @param middlewareTimesIndex Indicates an index in `operatorToMiddlewareTimes[operator]` to consult as proof of the `operator`'s ability to withdraw
     * @dev The correct `middlewareTimesIndex` input should be computable off-chain.
     */
    function canWithdraw(
        address operator,
        uint32 withdrawalStartBlock,
        uint256 middlewareTimesIndex
    ) external returns (bool);
    /**
     * operator =>
     *  [
     *      (
     *          the least recent update block of all of the middlewares it's serving/served,
     *          latest time that the stake bonded at that update needed to serve until
     *      )
     *  ]
     */
    function operatorToMiddlewareTimes(
        address operator,
        uint256 arrayIndex
    ) external view returns (MiddlewareTimes memory);
    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator].length`
    function middlewareTimesLength(address operator) external view returns (uint256);
    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator][index].stalestUpdateBlock`.
    function getMiddlewareTimesIndexStalestUpdateBlock(address operator, uint32 index) external view returns (uint32);
    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator][index].latestServeUntil`.
    function getMiddlewareTimesIndexServeUntilBlock(address operator, uint32 index) external view returns (uint32);
    /// @notice Getter function for fetching `_operatorToWhitelistedContractsByUpdate[operator].size`.
    function operatorWhitelistedContractsLinkedListSize(address operator) external view returns (uint256);
    /// @notice Getter function for fetching a single node in the operator's linked list (`_operatorToWhitelistedContractsByUpdate[operator]`).
    function operatorWhitelistedContractsLinkedListEntry(
        address operator,
        address node
    ) external view returns (bool, uint256, uint256);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
 * @title Minimal interface for an `Strategy` contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Custom `Strategy` implementations may expand extensively on this interface.
 */
interface IStrategy {
    /**
     * @notice Used to emit an event for the exchange rate between 1 share and underlying token in a strategy contract
     * @param rate is the exchange rate in wad 18 decimals
     * @dev Tokens that do not have 18 decimals must have offchain services scale the exchange rate by the proper magnitude
     */
    event ExchangeRateEmitted(uint256 rate);
    /**
     * Used to emit the underlying token and its decimals on strategy creation
     * @notice token
     * @param token is the ERC20 token of the strategy
     * @param decimals are the decimals of the ERC20 token in the strategy
     */
    event StrategyTokenSet(IERC20 token, uint8 decimals);
    /**
     * @notice Used to deposit tokens into this Strategy
     * @param token is the ERC20 token being deposited
     * @param amount is the amount of token being deposited
     * @dev This function is only callable by the strategyManager contract. It is invoked inside of the strategyManager's
     * `depositIntoStrategy` function, and individual share balances are recorded in the strategyManager as well.
     * @return newShares is the number of new shares issued at the current exchange ratio.
     */
    function deposit(IERC20 token, uint256 amount) external returns (uint256);
    /**
     * @notice Used to withdraw tokens from this Strategy, to the `recipient`'s address
     * @param recipient is the address to receive the withdrawn funds
     * @param token is the ERC20 token being transferred out
     * @param amountShares is the amount of shares being withdrawn
     * @dev This function is only callable by the strategyManager contract. It is invoked inside of the strategyManager's
     * other functions, and individual share balances are recorded in the strategyManager as well.
     */
    function withdraw(address recipient, IERC20 token, uint256 amountShares) external;
    /**
     * @notice Used to convert a number of shares to the equivalent amount of underlying tokens for this strategy.
     * @notice In contrast to `sharesToUnderlyingView`, this function **may** make state modifications
     * @param amountShares is the amount of shares to calculate its conversion into the underlying token
     * @return The amount of underlying tokens corresponding to the input `amountShares`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function sharesToUnderlying(uint256 amountShares) external returns (uint256);
    /**
     * @notice Used to convert an amount of underlying tokens to the equivalent amount of shares in this strategy.
     * @notice In contrast to `underlyingToSharesView`, this function **may** make state modifications
     * @param amountUnderlying is the amount of `underlyingToken` to calculate its conversion into strategy shares
     * @return The amount of underlying tokens corresponding to the input `amountShares`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function underlyingToShares(uint256 amountUnderlying) external returns (uint256);
    /**
     * @notice convenience function for fetching the current underlying value of all of the `user`'s shares in
     * this strategy. In contrast to `userUnderlyingView`, this function **may** make state modifications
     */
    function userUnderlying(address user) external returns (uint256);
    /**
     * @notice convenience function for fetching the current total shares of `user` in this strategy, by
     * querying the `strategyManager` contract
     */
    function shares(address user) external view returns (uint256);
    /**
     * @notice Used to convert a number of shares to the equivalent amount of underlying tokens for this strategy.
     * @notice In contrast to `sharesToUnderlying`, this function guarantees no state modifications
     * @param amountShares is the amount of shares to calculate its conversion into the underlying token
     * @return The amount of shares corresponding to the input `amountUnderlying`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function sharesToUnderlyingView(uint256 amountShares) external view returns (uint256);
    /**
     * @notice Used to convert an amount of underlying tokens to the equivalent amount of shares in this strategy.
     * @notice In contrast to `underlyingToShares`, this function guarantees no state modifications
     * @param amountUnderlying is the amount of `underlyingToken` to calculate its conversion into strategy shares
     * @return The amount of shares corresponding to the input `amountUnderlying`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function underlyingToSharesView(uint256 amountUnderlying) external view returns (uint256);
    /**
     * @notice convenience function for fetching the current underlying value of all of the `user`'s shares in
     * this strategy. In contrast to `userUnderlying`, this function guarantees no state modifications
     */
    function userUnderlyingView(address user) external view returns (uint256);
    /// @notice The underlying token for shares in this Strategy
    function underlyingToken() external view returns (IERC20);
    /// @notice The total number of extant shares in this Strategy
    function totalShares() external view returns (uint256);
    /// @notice Returns either a brief string explaining the strategy's goal & purpose, or a link to metadata that explains in more detail.
    function explanation() external view returns (string memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
/**
 * @title Interface for the `PauserRegistry` contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface IPauserRegistry {
    event PauserStatusChanged(address pauser, bool canPause);
    event UnpauserChanged(address previousUnpauser, address newUnpauser);
    /// @notice Mapping of addresses to whether they hold the pauser role.
    function isPauser(address pauser) external view returns (bool);
    /// @notice Unique address that holds the unpauser role. Capable of changing *both* the pauser and unpauser addresses.
    function unpauser() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./IStrategy.sol";
import "./ISignatureUtils.sol";
/**
 * @title DelegationManager
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice  This is the contract for delegation in EigenLayer. The main functionalities of this contract are
 * - enabling anyone to register as an operator in EigenLayer
 * - allowing operators to specify parameters related to stakers who delegate to them
 * - enabling any staker to delegate its stake to the operator of its choice (a given staker can only delegate to a single operator at a time)
 * - enabling a staker to undelegate its assets from the operator it is delegated to (performed as part of the withdrawal process, initiated through the StrategyManager)
 */
interface IDelegationManager is ISignatureUtils {
    // @notice Struct used for storing information about a single operator who has registered with EigenLayer
    struct OperatorDetails {
        /// @notice DEPRECATED -- this field is no longer used, payments are handled in PaymentCoordinator.sol
        address __deprecated_earningsReceiver;
        /**
         * @notice Address to verify signatures when a staker wishes to delegate to the operator, as well as controlling "forced undelegations".
         * @dev Signature verification follows these rules:
         * 1) If this address is left as address(0), then any staker will be free to delegate to the operator, i.e. no signature verification will be performed.
         * 2) If this address is an EOA (i.e. it has no code), then we follow standard ECDSA signature verification for delegations to the operator.
         * 3) If this address is a contract (i.e. it has code) then we forward a call to the contract and verify that it returns the correct EIP-1271 "magic value".
         */
        address delegationApprover;
        /**
         * @notice A minimum delay -- measured in blocks -- enforced between:
         * 1) the operator signalling their intent to register for a service, via calling `Slasher.optIntoSlashing`
         * and
         * 2) the operator completing registration for the service, via the service ultimately calling `Slasher.recordFirstStakeUpdate`
         * @dev note that for a specific operator, this value *cannot decrease*, i.e. if the operator wishes to modify their OperatorDetails,
         * then they are only allowed to either increase this value or keep it the same.
         */
        uint32 stakerOptOutWindowBlocks;
    }
    /**
     * @notice Abstract struct used in calculating an EIP712 signature for a staker to approve that they (the staker themselves) delegate to a specific operator.
     * @dev Used in computing the `STAKER_DELEGATION_TYPEHASH` and as a reference in the computation of the stakerDigestHash in the `delegateToBySignature` function.
     */
    struct StakerDelegation {
        // the staker who is delegating
        address staker;
        // the operator being delegated to
        address operator;
        // the staker's nonce
        uint256 nonce;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
    /**
     * @notice Abstract struct used in calculating an EIP712 signature for an operator's delegationApprover to approve that a specific staker delegate to the operator.
     * @dev Used in computing the `DELEGATION_APPROVAL_TYPEHASH` and as a reference in the computation of the approverDigestHash in the `_delegate` function.
     */
    struct DelegationApproval {
        // the staker who is delegating
        address staker;
        // the operator being delegated to
        address operator;
        // the operator's provided salt
        bytes32 salt;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
    /**
     * Struct type used to specify an existing queued withdrawal. Rather than storing the entire struct, only a hash is stored.
     * In functions that operate on existing queued withdrawals -- e.g. completeQueuedWithdrawal`, the data is resubmitted and the hash of the submitted
     * data is computed by `calculateWithdrawalRoot` and checked against the stored hash in order to confirm the integrity of the submitted data.
     */
    struct Withdrawal {
        // The address that originated the Withdrawal
        address staker;
        // The address that the staker was delegated to at the time that the Withdrawal was created
        address delegatedTo;
        // The address that can complete the Withdrawal + will receive funds when completing the withdrawal
        address withdrawer;
        // Nonce used to guarantee that otherwise identical withdrawals have unique hashes
        uint256 nonce;
        // Block number when the Withdrawal was created
        uint32 startBlock;
        // Array of strategies that the Withdrawal contains
        IStrategy[] strategies;
        // Array containing the amount of shares in each Strategy in the `strategies` array
        uint256[] shares;
    }
    struct QueuedWithdrawalParams {
        // Array of strategies that the QueuedWithdrawal contains
        IStrategy[] strategies;
        // Array containing the amount of shares in each Strategy in the `strategies` array
        uint256[] shares;
        // The address of the withdrawer
        address withdrawer;
    }
    // @notice Emitted when a new operator registers in EigenLayer and provides their OperatorDetails.
    event OperatorRegistered(address indexed operator, OperatorDetails operatorDetails);
    /// @notice Emitted when an operator updates their OperatorDetails to @param newOperatorDetails
    event OperatorDetailsModified(address indexed operator, OperatorDetails newOperatorDetails);
    /**
     * @notice Emitted when @param operator indicates that they are updating their MetadataURI string
     * @dev Note that these strings are *never stored in storage* and are instead purely emitted in events for off-chain indexing
     */
    event OperatorMetadataURIUpdated(address indexed operator, string metadataURI);
    /// @notice Emitted whenever an operator's shares are increased for a given strategy. Note that shares is the delta in the operator's shares.
    event OperatorSharesIncreased(address indexed operator, address staker, IStrategy strategy, uint256 shares);
    /// @notice Emitted whenever an operator's shares are decreased for a given strategy. Note that shares is the delta in the operator's shares.
    event OperatorSharesDecreased(address indexed operator, address staker, IStrategy strategy, uint256 shares);
    /// @notice Emitted when @param staker delegates to @param operator.
    event StakerDelegated(address indexed staker, address indexed operator);
    /// @notice Emitted when @param staker undelegates from @param operator.
    event StakerUndelegated(address indexed staker, address indexed operator);
    /// @notice Emitted when @param staker is undelegated via a call not originating from the staker themself
    event StakerForceUndelegated(address indexed staker, address indexed operator);
    /**
     * @notice Emitted when a new withdrawal is queued.
     * @param withdrawalRoot Is the hash of the `withdrawal`.
     * @param withdrawal Is the withdrawal itself.
     */
    event WithdrawalQueued(bytes32 withdrawalRoot, Withdrawal withdrawal);
    /// @notice Emitted when a queued withdrawal is completed
    event WithdrawalCompleted(bytes32 withdrawalRoot);
    /// @notice Emitted when the `minWithdrawalDelayBlocks` variable is modified from `previousValue` to `newValue`.
    event MinWithdrawalDelayBlocksSet(uint256 previousValue, uint256 newValue);
    /// @notice Emitted when the `strategyWithdrawalDelayBlocks` variable is modified from `previousValue` to `newValue`.
    event StrategyWithdrawalDelayBlocksSet(IStrategy strategy, uint256 previousValue, uint256 newValue);
    /**
     * @notice Registers the caller as an operator in EigenLayer.
     * @param registeringOperatorDetails is the `OperatorDetails` for the operator.
     * @param metadataURI is a URI for the operator's metadata, i.e. a link providing more details on the operator.
     *
     * @dev Once an operator is registered, they cannot 'deregister' as an operator, and they will forever be considered "delegated to themself".
     * @dev Note that the `metadataURI` is *never stored * and is only emitted in the `OperatorMetadataURIUpdated` event
     */
    function registerAsOperator(
        OperatorDetails calldata registeringOperatorDetails,
        string calldata metadataURI
    ) external;
    /**
     * @notice Updates an operator's stored `OperatorDetails`.
     * @param newOperatorDetails is the updated `OperatorDetails` for the operator, to replace their current OperatorDetails`.
     *
     * @dev The caller must have previously registered as an operator in EigenLayer.
     */
    function modifyOperatorDetails(OperatorDetails calldata newOperatorDetails) external;
    /**
     * @notice Called by an operator to emit an `OperatorMetadataURIUpdated` event indicating the information has updated.
     * @param metadataURI The URI for metadata associated with an operator
     * @dev Note that the `metadataURI` is *never stored * and is only emitted in the `OperatorMetadataURIUpdated` event
     */
    function updateOperatorMetadataURI(string calldata metadataURI) external;
    /**
     * @notice Caller delegates their stake to an operator.
     * @param operator The account (`msg.sender`) is delegating its assets to for use in serving applications built on EigenLayer.
     * @param approverSignatureAndExpiry Verifies the operator approves of this delegation
     * @param approverSalt A unique single use value tied to an individual signature.
     * @dev The approverSignatureAndExpiry is used in the event that:
     *          1) the operator's `delegationApprover` address is set to a non-zero value.
     *                  AND
     *          2) neither the operator nor their `delegationApprover` is the `msg.sender`, since in the event that the operator
     *             or their delegationApprover is the `msg.sender`, then approval is assumed.
     * @dev In the event that `approverSignatureAndExpiry` is not checked, its content is ignored entirely; it's recommended to use an empty input
     * in this case to save on complexity + gas costs
     */
    function delegateTo(
        address operator,
        SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;
    /**
     * @notice Caller delegates a staker's stake to an operator with valid signatures from both parties.
     * @param staker The account delegating stake to an `operator` account
     * @param operator The account (`staker`) is delegating its assets to for use in serving applications built on EigenLayer.
     * @param stakerSignatureAndExpiry Signed data from the staker authorizing delegating stake to an operator
     * @param approverSignatureAndExpiry is a parameter that will be used for verifying that the operator approves of this delegation action in the event that:
     * @param approverSalt Is a salt used to help guarantee signature uniqueness. Each salt can only be used once by a given approver.
     *
     * @dev If `staker` is an EOA, then `stakerSignature` is verified to be a valid ECDSA stakerSignature from `staker`, indicating their intention for this action.
     * @dev If `staker` is a contract, then `stakerSignature` will be checked according to EIP-1271.
     * @dev the operator's `delegationApprover` address is set to a non-zero value.
     * @dev neither the operator nor their `delegationApprover` is the `msg.sender`, since in the event that the operator or their delegationApprover
     * is the `msg.sender`, then approval is assumed.
     * @dev This function will revert if the current `block.timestamp` is equal to or exceeds the expiry
     * @dev In the case that `approverSignatureAndExpiry` is not checked, its content is ignored entirely; it's recommended to use an empty input
     * in this case to save on complexity + gas costs
     */
    function delegateToBySignature(
        address staker,
        address operator,
        SignatureWithExpiry memory stakerSignatureAndExpiry,
        SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;
    /**
     * @notice Undelegates the staker from the operator who they are delegated to. Puts the staker into the "undelegation limbo" mode of the EigenPodManager
     * and queues a withdrawal of all of the staker's shares in the StrategyManager (to the staker), if necessary.
     * @param staker The account to be undelegated.
     * @return withdrawalRoot The root of the newly queued withdrawal, if a withdrawal was queued. Otherwise just bytes32(0).
     *
     * @dev Reverts if the `staker` is also an operator, since operators are not allowed to undelegate from themselves.
     * @dev Reverts if the caller is not the staker, nor the operator who the staker is delegated to, nor the operator's specified "delegationApprover"
     * @dev Reverts if the `staker` is already undelegated.
     */
    function undelegate(address staker) external returns (bytes32[] memory withdrawalRoot);
    /**
     * Allows a staker to withdraw some shares. Withdrawn shares/strategies are immediately removed
     * from the staker. If the staker is delegated, withdrawn shares/strategies are also removed from
     * their operator.
     *
     * All withdrawn shares/strategies are placed in a queue and can be fully withdrawn after a delay.
     */
    function queueWithdrawals(QueuedWithdrawalParams[] calldata queuedWithdrawalParams)
        external
        returns (bytes32[] memory);
    /**
     * @notice Used to complete the specified `withdrawal`. The caller must match `withdrawal.withdrawer`
     * @param withdrawal The Withdrawal to complete.
     * @param tokens Array in which the i-th entry specifies the `token` input to the 'withdraw' function of the i-th Strategy in the `withdrawal.strategies` array.
     * This input can be provided with zero length if `receiveAsTokens` is set to 'false' (since in that case, this input will be unused)
     * @param middlewareTimesIndex is the index in the operator that the staker who triggered the withdrawal was delegated to's middleware times array
     * @param receiveAsTokens If true, the shares specified in the withdrawal will be withdrawn from the specified strategies themselves
     * and sent to the caller, through calls to `withdrawal.strategies[i].withdraw`. If false, then the shares in the specified strategies
     * will simply be transferred to the caller directly.
     * @dev middlewareTimesIndex should be calculated off chain before calling this function by finding the first index that satisfies `slasher.canWithdraw`
     * @dev beaconChainETHStrategy shares are non-transferrable, so if `receiveAsTokens = false` and `withdrawal.withdrawer != withdrawal.staker`, note that
     * any beaconChainETHStrategy shares in the `withdrawal` will be _returned to the staker_, rather than transferred to the withdrawer, unlike shares in
     * any other strategies, which will be transferred to the withdrawer.
     */
    function completeQueuedWithdrawal(
        Withdrawal calldata withdrawal,
        IERC20[] calldata tokens,
        uint256 middlewareTimesIndex,
        bool receiveAsTokens
    ) external;
    /**
     * @notice Array-ified version of `completeQueuedWithdrawal`.
     * Used to complete the specified `withdrawals`. The function caller must match `withdrawals[...].withdrawer`
     * @param withdrawals The Withdrawals to complete.
     * @param tokens Array of tokens for each Withdrawal. See `completeQueuedWithdrawal` for the usage of a single array.
     * @param middlewareTimesIndexes One index to reference per Withdrawal. See `completeQueuedWithdrawal` for the usage of a single index.
     * @param receiveAsTokens Whether or not to complete each withdrawal as tokens. See `completeQueuedWithdrawal` for the usage of a single boolean.
     * @dev See `completeQueuedWithdrawal` for relevant dev tags
     */
    function completeQueuedWithdrawals(
        Withdrawal[] calldata withdrawals,
        IERC20[][] calldata tokens,
        uint256[] calldata middlewareTimesIndexes,
        bool[] calldata receiveAsTokens
    ) external;
    /**
     * @notice Increases a staker's delegated share balance in a strategy.
     * @param staker The address to increase the delegated shares for their operator.
     * @param strategy The strategy in which to increase the delegated shares.
     * @param shares The number of shares to increase.
     *
     * @dev *If the staker is actively delegated*, then increases the `staker`'s delegated shares in `strategy` by `shares`. Otherwise does nothing.
     * @dev Callable only by the StrategyManager or EigenPodManager.
     */
    function increaseDelegatedShares(address staker, IStrategy strategy, uint256 shares) external;
    /**
     * @notice Decreases a staker's delegated share balance in a strategy.
     * @param staker The address to increase the delegated shares for their operator.
     * @param strategy The strategy in which to decrease the delegated shares.
     * @param shares The number of shares to decrease.
     *
     * @dev *If the staker is actively delegated*, then decreases the `staker`'s delegated shares in `strategy` by `shares`. Otherwise does nothing.
     * @dev Callable only by the StrategyManager or EigenPodManager.
     */
    function decreaseDelegatedShares(address staker, IStrategy strategy, uint256 shares) external;
    /**
     * @notice returns the address of the operator that `staker` is delegated to.
     * @notice Mapping: staker => operator whom the staker is currently delegated to.
     * @dev Note that returning address(0) indicates that the staker is not actively delegated to any operator.
     */
    function delegatedTo(address staker) external view returns (address);
    /**
     * @notice Returns the OperatorDetails struct associated with an `operator`.
     */
    function operatorDetails(address operator) external view returns (OperatorDetails memory);
    /**
     * @notice Returns the delegationApprover account for an operator
     */
    function delegationApprover(address operator) external view returns (address);
    /**
     * @notice Returns the stakerOptOutWindowBlocks for an operator
     */
    function stakerOptOutWindowBlocks(address operator) external view returns (uint256);
    /**
     * @notice Given array of strategies, returns array of shares for the operator
     */
    function getOperatorShares(
        address operator,
        IStrategy[] memory strategies
    ) external view returns (uint256[] memory);
    /**
     * @notice Given a list of strategies, return the minimum number of blocks that must pass to withdraw
     * from all the inputted strategies. Return value is >= minWithdrawalDelayBlocks as this is the global min withdrawal delay.
     * @param strategies The strategies to check withdrawal delays for
     */
    function getWithdrawalDelay(IStrategy[] calldata strategies) external view returns (uint256);
    /**
     * @notice returns the total number of shares in `strategy` that are delegated to `operator`.
     * @notice Mapping: operator => strategy => total number of shares in the strategy delegated to the operator.
     * @dev By design, the following invariant should hold for each Strategy:
     * (operator's shares in delegation manager) = sum (shares above zero of all stakers delegated to operator)
     * = sum (delegateable shares of all stakers delegated to the operator)
     */
    function operatorShares(address operator, IStrategy strategy) external view returns (uint256);
    /**
     * @notice Returns 'true' if `staker` *is* actively delegated, and 'false' otherwise.
     */
    function isDelegated(address staker) external view returns (bool);
    /**
     * @notice Returns true is an operator has previously registered for delegation.
     */
    function isOperator(address operator) external view returns (bool);
    /// @notice Mapping: staker => number of signed delegation nonces (used in `delegateToBySignature`) from the staker that the contract has already checked
    function stakerNonce(address staker) external view returns (uint256);
    /**
     * @notice Mapping: delegationApprover => 32-byte salt => whether or not the salt has already been used by the delegationApprover.
     * @dev Salts are used in the `delegateTo` and `delegateToBySignature` functions. Note that these functions only process the delegationApprover's
     * signature + the provided salt if the operator being delegated to has specified a nonzero address as their `delegationApprover`.
     */
    function delegationApproverSaltIsSpent(address _delegationApprover, bytes32 salt) external view returns (bool);
    /**
     * @notice Minimum delay enforced by this contract for completing queued withdrawals. Measured in blocks, and adjustable by this contract's owner,
     * up to a maximum of `MAX_WITHDRAWAL_DELAY_BLOCKS`. Minimum value is 0 (i.e. no delay enforced).
     * Note that strategies each have a separate withdrawal delay, which can be greater than this value. So the minimum number of blocks that must pass
     * to withdraw a strategy is MAX(minWithdrawalDelayBlocks, strategyWithdrawalDelayBlocks[strategy])
     */
    function minWithdrawalDelayBlocks() external view returns (uint256);
    /**
     * @notice Minimum delay enforced by this contract per Strategy for completing queued withdrawals. Measured in blocks, and adjustable by this contract's owner,
     * up to a maximum of `MAX_WITHDRAWAL_DELAY_BLOCKS`. Minimum value is 0 (i.e. no delay enforced).
     */
    function strategyWithdrawalDelayBlocks(IStrategy strategy) external view returns (uint256);
    /// @notice return address of the beaconChainETHStrategy
    function beaconChainETHStrategy() external view returns (IStrategy);
    /**
     * @notice Calculates the digestHash for a `staker` to sign to delegate to an `operator`
     * @param staker The signing staker
     * @param operator The operator who is being delegated to
     * @param expiry The desired expiry time of the staker's signature
     */
    function calculateCurrentStakerDelegationDigestHash(
        address staker,
        address operator,
        uint256 expiry
    ) external view returns (bytes32);
    /**
     * @notice Calculates the digest hash to be signed and used in the `delegateToBySignature` function
     * @param staker The signing staker
     * @param _stakerNonce The nonce of the staker. In practice we use the staker's current nonce, stored at `stakerNonce[staker]`
     * @param operator The operator who is being delegated to
     * @param expiry The desired expiry time of the staker's signature
     */
    function calculateStakerDelegationDigestHash(
        address staker,
        uint256 _stakerNonce,
        address operator,
        uint256 expiry
    ) external view returns (bytes32);
    /**
     * @notice Calculates the digest hash to be signed by the operator's delegationApprove and used in the `delegateTo` and `delegateToBySignature` functions.
     * @param staker The account delegating their stake
     * @param operator The account receiving delegated stake
     * @param _delegationApprover the operator's `delegationApprover` who will be signing the delegationHash (in general)
     * @param approverSalt A unique and single use value associated with the approver signature.
     * @param expiry Time after which the approver's signature becomes invalid
     */
    function calculateDelegationApprovalDigestHash(
        address staker,
        address operator,
        address _delegationApprover,
        bytes32 approverSalt,
        uint256 expiry
    ) external view returns (bytes32);
    /// @notice The EIP-712 typehash for the contract's domain
    function DOMAIN_TYPEHASH() external view returns (bytes32);
    /// @notice The EIP-712 typehash for the StakerDelegation struct used by the contract
    function STAKER_DELEGATION_TYPEHASH() external view returns (bytes32);
    /// @notice The EIP-712 typehash for the DelegationApproval struct used by the contract
    function DELEGATION_APPROVAL_TYPEHASH() external view returns (bytes32);
    /**
     * @notice Getter function for the current EIP-712 domain separator for this contract.
     *
     * @dev The domain separator will change in the event of a fork that changes the ChainID.
     * @dev By introducing a domain separator the DApp developers are guaranteed that there can be no signature collision.
     * for more detailed information please read EIP-712.
     */
    function domainSeparator() external view returns (bytes32);
    /// @notice Mapping: staker => cumulative number of queued withdrawals they have ever initiated.
    /// @dev This only increments (doesn't decrement), and is used to help ensure that otherwise identical withdrawals have unique hashes.
    function cumulativeWithdrawalsQueued(address staker) external view returns (uint256);
    /// @notice Returns the keccak256 hash of `withdrawal`.
    function calculateWithdrawalRoot(Withdrawal memory withdrawal) external pure returns (bytes32);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
/**
 * @title The interface for common signature utilities.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface ISignatureUtils {
    // @notice Struct that bundles together a signature and an expiration time for the signature. Used primarily for stack management.
    struct SignatureWithExpiry {
        // the signature itself, formatted as a single bytes object
        bytes signature;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
    // @notice Struct that bundles together a signature, a salt for uniqueness, and an expiration time for the signature. Used primarily for stack management.
    struct SignatureWithSaltAndExpiry {
        // the signature itself, formatted as a single bytes object
        bytes signature;
        // the salt used to generate the signature
        bytes32 salt;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {
        _changeAdmin(admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializing the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overridden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
import "@openzeppelin/contracts/utils/Create2.sol";
import "@openzeppelin-upgrades/contracts/proxy/utils/Initializable.sol";
import "@openzeppelin-upgrades/contracts/access/OwnableUpgradeable.sol";
import "@openzeppelin-upgrades/contracts/security/ReentrancyGuardUpgradeable.sol";
import "../permissions/Pausable.sol";
import "./EigenPodPausingConstants.sol";
import "./EigenPodManagerStorage.sol";
/**
 * @title The contract used for creating and managing EigenPods
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice The main functionalities are:
 * - creating EigenPods
 * - staking for new validators on EigenPods
 * - keeping track of the restaked balances of all EigenPod owners
 * - withdrawing eth when withdrawals are completed
 */
contract EigenPodManager is
    Initializable,
    OwnableUpgradeable,
    Pausable,
    EigenPodPausingConstants,
    EigenPodManagerStorage,
    ReentrancyGuardUpgradeable
{
    modifier onlyEigenPod(address podOwner) {
        require(address(ownerToPod[podOwner]) == msg.sender, "EigenPodManager.onlyEigenPod: not a pod");
        _;
    }
    modifier onlyDelegationManager() {
        require(
            msg.sender == address(delegationManager), "EigenPodManager.onlyDelegationManager: not the DelegationManager"
        );
        _;
    }
    constructor(
        IETHPOSDeposit _ethPOS,
        IBeacon _eigenPodBeacon,
        IStrategyManager _strategyManager,
        ISlasher _slasher,
        IDelegationManager _delegationManager
    ) EigenPodManagerStorage(_ethPOS, _eigenPodBeacon, _strategyManager, _slasher, _delegationManager) {
        _disableInitializers();
    }
    function initialize(
        address initialOwner,
        IPauserRegistry _pauserRegistry,
        uint256 _initPausedStatus
    ) external initializer {
        _transferOwnership(initialOwner);
        _initializePauser(_pauserRegistry, _initPausedStatus);
    }
    /**
     * @notice Creates an EigenPod for the sender.
     * @dev Function will revert if the `msg.sender` already has an EigenPod.
     * @dev Returns EigenPod address
     */
    function createPod() external onlyWhenNotPaused(PAUSED_NEW_EIGENPODS) returns (address) {
        require(!hasPod(msg.sender), "EigenPodManager.createPod: Sender already has a pod");
        // deploy a pod if the sender doesn't have one already
        IEigenPod pod = _deployPod();
        return address(pod);
    }
    /**
     * @notice Stakes for a new beacon chain validator on the sender's EigenPod.
     * Also creates an EigenPod for the sender if they don't have one already.
     * @param pubkey The 48 bytes public key of the beacon chain validator.
     * @param signature The validator's signature of the deposit data.
     * @param depositDataRoot The root/hash of the deposit data for the validator's deposit.
     */
    function stake(
        bytes calldata pubkey,
        bytes calldata signature,
        bytes32 depositDataRoot
    ) external payable onlyWhenNotPaused(PAUSED_NEW_EIGENPODS) {
        IEigenPod pod = ownerToPod[msg.sender];
        if (address(pod) == address(0)) {
            //deploy a pod if the sender doesn't have one already
            pod = _deployPod();
        }
        pod.stake{value: msg.value}(pubkey, signature, depositDataRoot);
    }
    /**
     * @notice Changes the `podOwner`'s shares by `sharesDelta` and performs a call to the DelegationManager
     * to ensure that delegated shares are also tracked correctly
     * @param podOwner is the pod owner whose balance is being updated.
     * @param sharesDelta is the change in podOwner's beaconChainETHStrategy shares
     * @dev Callable only by the podOwner's EigenPod contract.
     * @dev Reverts if `sharesDelta` is not a whole Gwei amount
     */
    function recordBeaconChainETHBalanceUpdate(
        address podOwner,
        int256 sharesDelta
    ) external onlyEigenPod(podOwner) nonReentrant {
        require(
            podOwner != address(0), "EigenPodManager.recordBeaconChainETHBalanceUpdate: podOwner cannot be zero address"
        );
        require(
            sharesDelta % int256(GWEI_TO_WEI) == 0,
            "EigenPodManager.recordBeaconChainETHBalanceUpdate: sharesDelta must be a whole Gwei amount"
        );
        int256 currentPodOwnerShares = podOwnerShares[podOwner];
        int256 updatedPodOwnerShares = currentPodOwnerShares + sharesDelta;
        podOwnerShares[podOwner] = updatedPodOwnerShares;
        // inform the DelegationManager of the change in delegateable shares
        int256 changeInDelegatableShares = _calculateChangeInDelegatableShares({
            sharesBefore: currentPodOwnerShares,
            sharesAfter: updatedPodOwnerShares
        });
        // skip making a call to the DelegationManager if there is no change in delegateable shares
        if (changeInDelegatableShares != 0) {
            if (changeInDelegatableShares < 0) {
                delegationManager.decreaseDelegatedShares({
                    staker: podOwner,
                    strategy: beaconChainETHStrategy,
                    shares: uint256(-changeInDelegatableShares)
                });
            } else {
                delegationManager.increaseDelegatedShares({
                    staker: podOwner,
                    strategy: beaconChainETHStrategy,
                    shares: uint256(changeInDelegatableShares)
                });
            }
        }
        emit PodSharesUpdated(podOwner, sharesDelta);
        emit NewTotalShares(podOwner, updatedPodOwnerShares);
    }
    /**
     * @notice Used by the DelegationManager to remove a pod owner's shares while they're in the withdrawal queue.
     * Simply decreases the `podOwner`'s shares by `shares`, down to a minimum of zero.
     * @dev This function reverts if it would result in `podOwnerShares[podOwner]` being less than zero, i.e. it is forbidden for this function to
     * result in the `podOwner` incurring a "share deficit". This behavior prevents a Staker from queuing a withdrawal which improperly removes excessive
     * shares from the operator to whom the staker is delegated.
     * @dev Reverts if `shares` is not a whole Gwei amount
     * @dev The delegation manager validates that the podOwner is not address(0)
     */
    function removeShares(address podOwner, uint256 shares) external onlyDelegationManager {
        require(int256(shares) >= 0, "EigenPodManager.removeShares: shares cannot be negative");
        require(shares % GWEI_TO_WEI == 0, "EigenPodManager.removeShares: shares must be a whole Gwei amount");
        int256 updatedPodOwnerShares = podOwnerShares[podOwner] - int256(shares);
        require(
            updatedPodOwnerShares >= 0,
            "EigenPodManager.removeShares: cannot result in pod owner having negative shares"
        );
        podOwnerShares[podOwner] = updatedPodOwnerShares;
        emit NewTotalShares(podOwner, updatedPodOwnerShares);
    }
    /**
     * @notice Increases the `podOwner`'s shares by `shares`, paying off deficit if possible.
     * Used by the DelegationManager to award a pod owner shares on exiting the withdrawal queue
     * @dev Returns the number of shares added to `podOwnerShares[podOwner]` above zero, which will be less than the `shares` input
     * in the event that the podOwner has an existing shares deficit (i.e. `podOwnerShares[podOwner]` starts below zero)
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function addShares(address podOwner, uint256 shares) external onlyDelegationManager returns (uint256) {
        require(podOwner != address(0), "EigenPodManager.addShares: podOwner cannot be zero address");
        require(int256(shares) >= 0, "EigenPodManager.addShares: shares cannot be negative");
        require(shares % GWEI_TO_WEI == 0, "EigenPodManager.addShares: shares must be a whole Gwei amount");
        int256 currentPodOwnerShares = podOwnerShares[podOwner];
        int256 updatedPodOwnerShares = currentPodOwnerShares + int256(shares);
        podOwnerShares[podOwner] = updatedPodOwnerShares;
        emit PodSharesUpdated(podOwner, int256(shares));
        emit NewTotalShares(podOwner, updatedPodOwnerShares);
        return uint256(
            _calculateChangeInDelegatableShares({
                sharesBefore: currentPodOwnerShares,
                sharesAfter: updatedPodOwnerShares
            })
        );
    }
    /**
     * @notice Used by the DelegationManager to complete a withdrawal, sending tokens to some destination address
     * @dev Prioritizes decreasing the podOwner's share deficit, if they have one
     * @dev Reverts if `shares` is not a whole Gwei amount
     * @dev This function assumes that `removeShares` has already been called by the delegationManager, hence why
     *      we do not need to update the podOwnerShares if `currentPodOwnerShares` is positive
     */
    function withdrawSharesAsTokens(
        address podOwner,
        address destination,
        uint256 shares
    ) external onlyDelegationManager {
        require(podOwner != address(0), "EigenPodManager.withdrawSharesAsTokens: podOwner cannot be zero address");
        require(destination != address(0), "EigenPodManager.withdrawSharesAsTokens: destination cannot be zero address");
        require(int256(shares) >= 0, "EigenPodManager.withdrawSharesAsTokens: shares cannot be negative");
        require(shares % GWEI_TO_WEI == 0, "EigenPodManager.withdrawSharesAsTokens: shares must be a whole Gwei amount");
        int256 currentPodOwnerShares = podOwnerShares[podOwner];
        // if there is an existing shares deficit, prioritize decreasing the deficit first
        if (currentPodOwnerShares < 0) {
            uint256 currentShareDeficit = uint256(-currentPodOwnerShares);
            if (shares > currentShareDeficit) {
                // get rid of the whole deficit if possible, and pass any remaining shares onto destination
                podOwnerShares[podOwner] = 0;
                shares -= currentShareDeficit;
                emit PodSharesUpdated(podOwner, int256(currentShareDeficit));
                emit NewTotalShares(podOwner, 0);
            } else {
                // otherwise get rid of as much deficit as possible, and return early, since there is nothing left over to forward on
                int256 updatedPodOwnerShares = podOwnerShares[podOwner] + int256(shares);
                podOwnerShares[podOwner] = updatedPodOwnerShares;
                emit PodSharesUpdated(podOwner, int256(shares));
                emit NewTotalShares(podOwner, updatedPodOwnerShares);
                return;
            }
        }
        // Actually withdraw to the destination
        ownerToPod[podOwner].withdrawRestakedBeaconChainETH(destination, shares);
    }
    // INTERNAL FUNCTIONS
    function _deployPod() internal returns (IEigenPod) {
        ++numPods;
        // create the pod
        IEigenPod pod = IEigenPod(
            Create2.deploy(
                0,
                bytes32(uint256(uint160(msg.sender))),
                // set the beacon address to the eigenPodBeacon and initialize it
                abi.encodePacked(beaconProxyBytecode, abi.encode(eigenPodBeacon, ""))
            )
        );
        pod.initialize(msg.sender);
        // store the pod in the mapping
        ownerToPod[msg.sender] = pod;
        emit PodDeployed(address(pod), msg.sender);
        return pod;
    }
    /**
     * @notice Calculates the change in a pod owner's delegateable shares as a result of their beacon chain ETH shares changing
     * from `sharesBefore` to `sharesAfter`. The key concept here is that negative/"deficit" shares are not delegateable.
     */
    function _calculateChangeInDelegatableShares(
        int256 sharesBefore,
        int256 sharesAfter
    ) internal pure returns (int256) {
        if (sharesBefore <= 0) {
            if (sharesAfter <= 0) {
                // if the shares started negative and stayed negative, then there cannot have been an increase in delegateable shares
                return 0;
            } else {
                // if the shares started negative and became positive, then the increase in delegateable shares is the ending share amount
                return sharesAfter;
            }
        } else {
            if (sharesAfter <= 0) {
                // if the shares started positive and became negative, then the decrease in delegateable shares is the starting share amount
                return (-sharesBefore);
            } else {
                // if the shares started positive and stayed positive, then the change in delegateable shares
                // is the difference between starting and ending amounts
                return (sharesAfter - sharesBefore);
            }
        }
    }
    // VIEW FUNCTIONS
    /// @notice Returns the address of the `podOwner`'s EigenPod (whether it is deployed yet or not).
    function getPod(address podOwner) public view returns (IEigenPod) {
        IEigenPod pod = ownerToPod[podOwner];
        // if pod does not exist already, calculate what its address *will be* once it is deployed
        if (address(pod) == address(0)) {
            pod = IEigenPod(
                Create2.computeAddress(
                    bytes32(uint256(uint160(podOwner))), //salt
                    keccak256(abi.encodePacked(beaconProxyBytecode, abi.encode(eigenPodBeacon, ""))) //bytecode
                )
            );
        }
        return pod;
    }
    /// @notice Returns 'true' if the `podOwner` has created an EigenPod, and 'false' otherwise.
    function hasPod(address podOwner) public view returns (bool) {
        return address(ownerToPod[podOwner]) != address(0);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Create2.sol)
pragma solidity ^0.8.0;
/**
 * @dev Helper to make usage of the `CREATE2` EVM opcode easier and safer.
 * `CREATE2` can be used to compute in advance the address where a smart
 * contract will be deployed, which allows for interesting new mechanisms known
 * as 'counterfactual interactions'.
 *
 * See the https://eips.ethereum.org/EIPS/eip-1014#motivation[EIP] for more
 * information.
 */
library Create2 {
    /**
     * @dev Deploys a contract using `CREATE2`. The address where the contract
     * will be deployed can be known in advance via {computeAddress}.
     *
     * The bytecode for a contract can be obtained from Solidity with
     * `type(contractName).creationCode`.
     *
     * Requirements:
     *
     * - `bytecode` must not be empty.
     * - `salt` must have not been used for `bytecode` already.
     * - the factory must have a balance of at least `amount`.
     * - if `amount` is non-zero, `bytecode` must have a `payable` constructor.
     */
    function deploy(
        uint256 amount,
        bytes32 salt,
        bytes memory bytecode
    ) internal returns (address) {
        address addr;
        require(address(this).balance >= amount, "Create2: insufficient balance");
        require(bytecode.length != 0, "Create2: bytecode length is zero");
        /// @solidity memory-safe-assembly
        assembly {
            addr := create2(amount, add(bytecode, 0x20), mload(bytecode), salt)
        }
        require(addr != address(0), "Create2: Failed on deploy");
        return addr;
    }
    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy}. Any change in the
     * `bytecodeHash` or `salt` will result in a new destination address.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash) internal view returns (address) {
        return computeAddress(salt, bytecodeHash, address(this));
    }
    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy} from a contract located at
     * `deployer`. If `deployer` is this contract's address, returns the same value as {computeAddress}.
     */
    function computeAddress(
        bytes32 salt,
        bytes32 bytecodeHash,
        address deployer
    ) internal pure returns (address) {
        bytes32 _data = keccak256(abi.encodePacked(bytes1(0xff), deployer, salt, bytecodeHash));
        return address(uint160(uint256(_data)));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }
    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }
    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
import "../interfaces/IPausable.sol";
/**
 * @title Adds pausability to a contract, with pausing & unpausing controlled by the `pauser` and `unpauser` of a PauserRegistry contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Contracts that inherit from this contract may define their own `pause` and `unpause` (and/or related) functions.
 * These functions should be permissioned as "onlyPauser" which defers to a `PauserRegistry` for determining access control.
 * @dev Pausability is implemented using a uint256, which allows up to 256 different single bit-flags; each bit can potentially pause different functionality.
 * Inspiration for this was taken from the NearBridge design here https://etherscan.io/address/0x3FEFc5A4B1c02f21cBc8D3613643ba0635b9a873#code.
 * For the `pause` and `unpause` functions we've implemented, if you pause, you can only flip (any number of) switches to on/1 (aka "paused"), and if you unpause,
 * you can only flip (any number of) switches to off/0 (aka "paused").
 * If you want a pauseXYZ function that just flips a single bit / "pausing flag", it will:
 * 1) 'bit-wise and' (aka `&`) a flag with the current paused state (as a uint256)
 * 2) update the paused state to this new value
 * @dev We note as well that we have chosen to identify flags by their *bit index* as opposed to their numerical value, so, e.g. defining `DEPOSITS_PAUSED = 3`
 * indicates specifically that if the *third bit* of `_paused` is flipped -- i.e. it is a '1' -- then deposits should be paused
 */
contract Pausable is IPausable {
    /// @notice Address of the `PauserRegistry` contract that this contract defers to for determining access control (for pausing).
    IPauserRegistry public pauserRegistry;
    /// @dev whether or not the contract is currently paused
    uint256 private _paused;
    uint256 internal constant UNPAUSE_ALL = 0;
    uint256 internal constant PAUSE_ALL = type(uint256).max;
    /// @notice
    modifier onlyPauser() {
        require(pauserRegistry.isPauser(msg.sender), "msg.sender is not permissioned as pauser");
        _;
    }
    modifier onlyUnpauser() {
        require(msg.sender == pauserRegistry.unpauser(), "msg.sender is not permissioned as unpauser");
        _;
    }
    /// @notice Throws if the contract is paused, i.e. if any of the bits in `_paused` is flipped to 1.
    modifier whenNotPaused() {
        require(_paused == 0, "Pausable: contract is paused");
        _;
    }
    /// @notice Throws if the `indexed`th bit of `_paused` is 1, i.e. if the `index`th pause switch is flipped.
    modifier onlyWhenNotPaused(uint8 index) {
        require(!paused(index), "Pausable: index is paused");
        _;
    }
    /// @notice One-time function for setting the `pauserRegistry` and initializing the value of `_paused`.
    function _initializePauser(IPauserRegistry _pauserRegistry, uint256 initPausedStatus) internal {
        require(
            address(pauserRegistry) == address(0) && address(_pauserRegistry) != address(0),
            "Pausable._initializePauser: _initializePauser() can only be called once"
        );
        _paused = initPausedStatus;
        emit Paused(msg.sender, initPausedStatus);
        _setPauserRegistry(_pauserRegistry);
    }
    /**
     * @notice This function is used to pause an EigenLayer contract's functionality.
     * It is permissioned to the `pauser` address, which is expected to be a low threshold multisig.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only pause functionality, and thus cannot 'unflip' any bit in `_paused` from 1 to 0.
     */
    function pause(uint256 newPausedStatus) external onlyPauser {
        // verify that the `newPausedStatus` does not *unflip* any bits (i.e. doesn't unpause anything, all 1 bits remain)
        require((_paused & newPausedStatus) == _paused, "Pausable.pause: invalid attempt to unpause functionality");
        _paused = newPausedStatus;
        emit Paused(msg.sender, newPausedStatus);
    }
    /**
     * @notice Alias for `pause(type(uint256).max)`.
     */
    function pauseAll() external onlyPauser {
        _paused = type(uint256).max;
        emit Paused(msg.sender, type(uint256).max);
    }
    /**
     * @notice This function is used to unpause an EigenLayer contract's functionality.
     * It is permissioned to the `unpauser` address, which is expected to be a high threshold multisig or governance contract.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only unpause functionality, and thus cannot 'flip' any bit in `_paused` from 0 to 1.
     */
    function unpause(uint256 newPausedStatus) external onlyUnpauser {
        // verify that the `newPausedStatus` does not *flip* any bits (i.e. doesn't pause anything, all 0 bits remain)
        require(
            ((~_paused) & (~newPausedStatus)) == (~_paused), "Pausable.unpause: invalid attempt to pause functionality"
        );
        _paused = newPausedStatus;
        emit Unpaused(msg.sender, newPausedStatus);
    }
    /// @notice Returns the current paused status as a uint256.
    function paused() public view virtual returns (uint256) {
        return _paused;
    }
    /// @notice Returns 'true' if the `indexed`th bit of `_paused` is 1, and 'false' otherwise
    function paused(uint8 index) public view virtual returns (bool) {
        uint256 mask = 1 << index;
        return ((_paused & mask) == mask);
    }
    /// @notice Allows the unpauser to set a new pauser registry
    function setPauserRegistry(IPauserRegistry newPauserRegistry) external onlyUnpauser {
        _setPauserRegistry(newPauserRegistry);
    }
    /// internal function for setting pauser registry
    function _setPauserRegistry(IPauserRegistry newPauserRegistry) internal {
        require(
            address(newPauserRegistry) != address(0),
            "Pausable._setPauserRegistry: newPauserRegistry cannot be the zero address"
        );
        emit PauserRegistrySet(pauserRegistry, newPauserRegistry);
        pauserRegistry = newPauserRegistry;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[48] private __gap;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
/**
 * @title Constants shared between 'EigenPod' and 'EigenPodManager' contracts.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
abstract contract EigenPodPausingConstants {
    /// @notice Index for flag that pauses creation of new EigenPods when set. See EigenPodManager code for details.
    uint8 internal constant PAUSED_NEW_EIGENPODS = 0;
    /**
     * @notice Index for flag that pauses all withdrawal-of-restaked ETH related functionality `
     * function *of the EigenPodManager* when set. See EigenPodManager code for details.
     */
    uint8 internal constant PAUSED_WITHDRAW_RESTAKED_ETH = 1;
    /// @notice Index for flag that pauses the deposit related functions *of the EigenPods* when set. see EigenPod code for details.
    uint8 internal constant PAUSED_EIGENPODS_VERIFY_CREDENTIALS = 2;
    // Deprecated
    // uint8 internal constant PAUSED_EIGENPODS_VERIFY_BALANCE_UPDATE = 3;
    // Deprecated
    // uint8 internal constant PAUSED_EIGENPODS_VERIFY_WITHDRAWAL = 4;
    /// @notice Pausability for EigenPod's "accidental transfer" withdrawal methods
    uint8 internal constant PAUSED_NON_PROOF_WITHDRAWALS = 5;
    uint8 internal constant PAUSED_START_CHECKPOINT = 6;
    /// @notice Index for flag that pauses the `verifyCheckpointProofs` function *of the EigenPods* when set. see EigenPod code for details.
    uint8 internal constant PAUSED_EIGENPODS_VERIFY_CHECKPOINT_PROOFS = 7;
    uint8 internal constant PAUSED_VERIFY_STALE_BALANCE = 8;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.12;
import "@openzeppelin/contracts/proxy/beacon/IBeacon.sol";
import "../interfaces/IStrategy.sol";
import "../interfaces/IEigenPodManager.sol";
import "../interfaces/IStrategyManager.sol";
import "../interfaces/IDelegationManager.sol";
import "../interfaces/IETHPOSDeposit.sol";
import "../interfaces/IEigenPod.sol";
abstract contract EigenPodManagerStorage is IEigenPodManager {
    /**
     *
     *                            CONSTANTS / IMMUTABLES
     *
     */
    /// @notice The ETH2 Deposit Contract
    IETHPOSDeposit public immutable ethPOS;
    /// @notice Beacon proxy to which the EigenPods point
    IBeacon public immutable eigenPodBeacon;
    /// @notice EigenLayer's StrategyManager contract
    IStrategyManager public immutable strategyManager;
    /// @notice EigenLayer's Slasher contract
    ISlasher public immutable slasher;
    /// @notice EigenLayer's DelegationManager contract
    IDelegationManager public immutable delegationManager;
    /**
     * @notice Stored code of type(BeaconProxy).creationCode
     * @dev Maintained as a constant to solve an edge case - changes to OpenZeppelin's BeaconProxy code should not cause
     * addresses of EigenPods that are pre-computed with Create2 to change, even upon upgrading this contract, changing compiler version, etc.
     */
    bytes internal constant beaconProxyBytecode =
        hex"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";
    // @notice Internal constant used in calculations, since the beacon chain stores balances in Gwei rather than wei
    uint256 internal constant GWEI_TO_WEI = 1e9;
    /// @notice Canonical, virtual beacon chain ETH strategy
    IStrategy public constant beaconChainETHStrategy = IStrategy(0xbeaC0eeEeeeeEEeEeEEEEeeEEeEeeeEeeEEBEaC0);
    /**
     *
     *                                STATE VARIABLES
     *
     */
    /// @notice [DEPRECATED] Previously used to query beacon block roots. We now use eip-4788 directly
    address internal __deprecated_beaconChainOracle;
    /// @notice Pod owner to deployed EigenPod address
    mapping(address => IEigenPod) public ownerToPod;
    // BEGIN STORAGE VARIABLES ADDED AFTER FIRST TESTNET DEPLOYMENT -- DO NOT SUGGEST REORDERING TO CONVENTIONAL ORDER
    /// @notice The number of EigenPods that have been deployed
    uint256 public numPods;
    /// @notice [DEPRECATED] Was initially used to limit growth early on but there is no longer
    /// a maximum number of EigenPods that can be deployed.
    uint256 private __deprecated_maxPods;
    // BEGIN STORAGE VARIABLES ADDED AFTER MAINNET DEPLOYMENT -- DO NOT SUGGEST REORDERING TO CONVENTIONAL ORDER
    /**
     * @notice Mapping from Pod owner owner to the number of shares they have in the virtual beacon chain ETH strategy.
     * @dev The share amount can become negative. This is necessary to accommodate the fact that a pod owner's virtual beacon chain ETH shares can
     * decrease between the pod owner queuing and completing a withdrawal.
     * When the pod owner's shares would otherwise increase, this "deficit" is decreased first _instead_.
     * Likewise, when a withdrawal is completed, this "deficit" is decreased and the withdrawal amount is decreased; We can think of this
     * as the withdrawal "paying off the deficit".
     */
    mapping(address => int256) public podOwnerShares;
    uint64 internal __deprecated_denebForkTimestamp;
    constructor(
        IETHPOSDeposit _ethPOS,
        IBeacon _eigenPodBeacon,
        IStrategyManager _strategyManager,
        ISlasher _slasher,
        IDelegationManager _delegationManager
    ) {
        ethPOS = _ethPOS;
        eigenPodBeacon = _eigenPodBeacon;
        strategyManager = _strategyManager;
        slasher = _slasher;
        delegationManager = _delegationManager;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[44] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "../interfaces/IPauserRegistry.sol";
/**
 * @title Adds pausability to a contract, with pausing & unpausing controlled by the `pauser` and `unpauser` of a PauserRegistry contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Contracts that inherit from this contract may define their own `pause` and `unpause` (and/or related) functions.
 * These functions should be permissioned as "onlyPauser" which defers to a `PauserRegistry` for determining access control.
 * @dev Pausability is implemented using a uint256, which allows up to 256 different single bit-flags; each bit can potentially pause different functionality.
 * Inspiration for this was taken from the NearBridge design here https://etherscan.io/address/0x3FEFc5A4B1c02f21cBc8D3613643ba0635b9a873#code.
 * For the `pause` and `unpause` functions we've implemented, if you pause, you can only flip (any number of) switches to on/1 (aka "paused"), and if you unpause,
 * you can only flip (any number of) switches to off/0 (aka "paused").
 * If you want a pauseXYZ function that just flips a single bit / "pausing flag", it will:
 * 1) 'bit-wise and' (aka `&`) a flag with the current paused state (as a uint256)
 * 2) update the paused state to this new value
 * @dev We note as well that we have chosen to identify flags by their *bit index* as opposed to their numerical value, so, e.g. defining `DEPOSITS_PAUSED = 3`
 * indicates specifically that if the *third bit* of `_paused` is flipped -- i.e. it is a '1' -- then deposits should be paused
 */
interface IPausable {
    /// @notice Emitted when the `pauserRegistry` is set to `newPauserRegistry`.
    event PauserRegistrySet(IPauserRegistry pauserRegistry, IPauserRegistry newPauserRegistry);
    /// @notice Emitted when the pause is triggered by `account`, and changed to `newPausedStatus`.
    event Paused(address indexed account, uint256 newPausedStatus);
    /// @notice Emitted when the pause is lifted by `account`, and changed to `newPausedStatus`.
    event Unpaused(address indexed account, uint256 newPausedStatus);
    /// @notice Address of the `PauserRegistry` contract that this contract defers to for determining access control (for pausing).
    function pauserRegistry() external view returns (IPauserRegistry);
    /**
     * @notice This function is used to pause an EigenLayer contract's functionality.
     * It is permissioned to the `pauser` address, which is expected to be a low threshold multisig.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only pause functionality, and thus cannot 'unflip' any bit in `_paused` from 1 to 0.
     */
    function pause(uint256 newPausedStatus) external;
    /**
     * @notice Alias for `pause(type(uint256).max)`.
     */
    function pauseAll() external;
    /**
     * @notice This function is used to unpause an EigenLayer contract's functionality.
     * It is permissioned to the `unpauser` address, which is expected to be a high threshold multisig or governance contract.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only unpause functionality, and thus cannot 'flip' any bit in `_paused` from 0 to 1.
     */
    function unpause(uint256 newPausedStatus) external;
    /// @notice Returns the current paused status as a uint256.
    function paused() external view returns (uint256);
    /// @notice Returns 'true' if the `indexed`th bit of `_paused` is 1, and 'false' otherwise
    function paused(uint8 index) external view returns (bool);
    /// @notice Allows the unpauser to set a new pauser registry
    function setPauserRegistry(IPauserRegistry newPauserRegistry) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
 * @title Minimal interface for an `Strategy` contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Custom `Strategy` implementations may expand extensively on this interface.
 */
interface IStrategy {
    /**
     * @notice Used to emit an event for the exchange rate between 1 share and underlying token in a strategy contract
     * @param rate is the exchange rate in wad 18 decimals
     * @dev Tokens that do not have 18 decimals must have offchain services scale the exchange rate by the proper magnitude
     */
    event ExchangeRateEmitted(uint256 rate);
    /**
     * Used to emit the underlying token and its decimals on strategy creation
     * @notice token
     * @param token is the ERC20 token of the strategy
     * @param decimals are the decimals of the ERC20 token in the strategy
     */
    event StrategyTokenSet(IERC20 token, uint8 decimals);
    /**
     * @notice Used to deposit tokens into this Strategy
     * @param token is the ERC20 token being deposited
     * @param amount is the amount of token being deposited
     * @dev This function is only callable by the strategyManager contract. It is invoked inside of the strategyManager's
     * `depositIntoStrategy` function, and individual share balances are recorded in the strategyManager as well.
     * @return newShares is the number of new shares issued at the current exchange ratio.
     */
    function deposit(IERC20 token, uint256 amount) external returns (uint256);
    /**
     * @notice Used to withdraw tokens from this Strategy, to the `recipient`'s address
     * @param recipient is the address to receive the withdrawn funds
     * @param token is the ERC20 token being transferred out
     * @param amountShares is the amount of shares being withdrawn
     * @dev This function is only callable by the strategyManager contract. It is invoked inside of the strategyManager's
     * other functions, and individual share balances are recorded in the strategyManager as well.
     */
    function withdraw(address recipient, IERC20 token, uint256 amountShares) external;
    /**
     * @notice Used to convert a number of shares to the equivalent amount of underlying tokens for this strategy.
     * @notice In contrast to `sharesToUnderlyingView`, this function **may** make state modifications
     * @param amountShares is the amount of shares to calculate its conversion into the underlying token
     * @return The amount of underlying tokens corresponding to the input `amountShares`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function sharesToUnderlying(uint256 amountShares) external returns (uint256);
    /**
     * @notice Used to convert an amount of underlying tokens to the equivalent amount of shares in this strategy.
     * @notice In contrast to `underlyingToSharesView`, this function **may** make state modifications
     * @param amountUnderlying is the amount of `underlyingToken` to calculate its conversion into strategy shares
     * @return The amount of underlying tokens corresponding to the input `amountShares`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function underlyingToShares(uint256 amountUnderlying) external returns (uint256);
    /**
     * @notice convenience function for fetching the current underlying value of all of the `user`'s shares in
     * this strategy. In contrast to `userUnderlyingView`, this function **may** make state modifications
     */
    function userUnderlying(address user) external returns (uint256);
    /**
     * @notice convenience function for fetching the current total shares of `user` in this strategy, by
     * querying the `strategyManager` contract
     */
    function shares(address user) external view returns (uint256);
    /**
     * @notice Used to convert a number of shares to the equivalent amount of underlying tokens for this strategy.
     * @notice In contrast to `sharesToUnderlying`, this function guarantees no state modifications
     * @param amountShares is the amount of shares to calculate its conversion into the underlying token
     * @return The amount of shares corresponding to the input `amountUnderlying`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function sharesToUnderlyingView(uint256 amountShares) external view returns (uint256);
    /**
     * @notice Used to convert an amount of underlying tokens to the equivalent amount of shares in this strategy.
     * @notice In contrast to `underlyingToShares`, this function guarantees no state modifications
     * @param amountUnderlying is the amount of `underlyingToken` to calculate its conversion into strategy shares
     * @return The amount of shares corresponding to the input `amountUnderlying`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function underlyingToSharesView(uint256 amountUnderlying) external view returns (uint256);
    /**
     * @notice convenience function for fetching the current underlying value of all of the `user`'s shares in
     * this strategy. In contrast to `userUnderlying`, this function guarantees no state modifications
     */
    function userUnderlyingView(address user) external view returns (uint256);
    /// @notice The underlying token for shares in this Strategy
    function underlyingToken() external view returns (IERC20);
    /// @notice The total number of extant shares in this Strategy
    function totalShares() external view returns (uint256);
    /// @notice Returns either a brief string explaining the strategy's goal & purpose, or a link to metadata that explains in more detail.
    function explanation() external view returns (string memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/proxy/beacon/IBeacon.sol";
import "./IETHPOSDeposit.sol";
import "./IStrategyManager.sol";
import "./IEigenPod.sol";
import "./IPausable.sol";
import "./ISlasher.sol";
import "./IStrategy.sol";
/**
 * @title Interface for factory that creates and manages solo staking pods that have their withdrawal credentials pointed to EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface IEigenPodManager is IPausable {
    /// @notice Emitted to notify the deployment of an EigenPod
    event PodDeployed(address indexed eigenPod, address indexed podOwner);
    /// @notice Emitted to notify a deposit of beacon chain ETH recorded in the strategy manager
    event BeaconChainETHDeposited(address indexed podOwner, uint256 amount);
    /// @notice Emitted when the balance of an EigenPod is updated
    event PodSharesUpdated(address indexed podOwner, int256 sharesDelta);
    /// @notice Emitted every time the total shares of a pod are updated
    event NewTotalShares(address indexed podOwner, int256 newTotalShares);
    /// @notice Emitted when a withdrawal of beacon chain ETH is completed
    event BeaconChainETHWithdrawalCompleted(
        address indexed podOwner,
        uint256 shares,
        uint96 nonce,
        address delegatedAddress,
        address withdrawer,
        bytes32 withdrawalRoot
    );
    /**
     * @notice Creates an EigenPod for the sender.
     * @dev Function will revert if the `msg.sender` already has an EigenPod.
     * @dev Returns EigenPod address
     */
    function createPod() external returns (address);
    /**
     * @notice Stakes for a new beacon chain validator on the sender's EigenPod.
     * Also creates an EigenPod for the sender if they don't have one already.
     * @param pubkey The 48 bytes public key of the beacon chain validator.
     * @param signature The validator's signature of the deposit data.
     * @param depositDataRoot The root/hash of the deposit data for the validator's deposit.
     */
    function stake(bytes calldata pubkey, bytes calldata signature, bytes32 depositDataRoot) external payable;
    /**
     * @notice Changes the `podOwner`'s shares by `sharesDelta` and performs a call to the DelegationManager
     * to ensure that delegated shares are also tracked correctly
     * @param podOwner is the pod owner whose balance is being updated.
     * @param sharesDelta is the change in podOwner's beaconChainETHStrategy shares
     * @dev Callable only by the podOwner's EigenPod contract.
     * @dev Reverts if `sharesDelta` is not a whole Gwei amount
     */
    function recordBeaconChainETHBalanceUpdate(address podOwner, int256 sharesDelta) external;
    /// @notice Returns the address of the `podOwner`'s EigenPod if it has been deployed.
    function ownerToPod(address podOwner) external view returns (IEigenPod);
    /// @notice Returns the address of the `podOwner`'s EigenPod (whether it is deployed yet or not).
    function getPod(address podOwner) external view returns (IEigenPod);
    /// @notice The ETH2 Deposit Contract
    function ethPOS() external view returns (IETHPOSDeposit);
    /// @notice Beacon proxy to which the EigenPods point
    function eigenPodBeacon() external view returns (IBeacon);
    /// @notice EigenLayer's StrategyManager contract
    function strategyManager() external view returns (IStrategyManager);
    /// @notice EigenLayer's Slasher contract
    function slasher() external view returns (ISlasher);
    /// @notice Returns 'true' if the `podOwner` has created an EigenPod, and 'false' otherwise.
    function hasPod(address podOwner) external view returns (bool);
    /// @notice Returns the number of EigenPods that have been created
    function numPods() external view returns (uint256);
    /**
     * @notice Mapping from Pod owner owner to the number of shares they have in the virtual beacon chain ETH strategy.
     * @dev The share amount can become negative. This is necessary to accommodate the fact that a pod owner's virtual beacon chain ETH shares can
     * decrease between the pod owner queuing and completing a withdrawal.
     * When the pod owner's shares would otherwise increase, this "deficit" is decreased first _instead_.
     * Likewise, when a withdrawal is completed, this "deficit" is decreased and the withdrawal amount is decreased; We can think of this
     * as the withdrawal "paying off the deficit".
     */
    function podOwnerShares(address podOwner) external view returns (int256);
    /// @notice returns canonical, virtual beaconChainETH strategy
    function beaconChainETHStrategy() external view returns (IStrategy);
    /**
     * @notice Used by the DelegationManager to remove a pod owner's shares while they're in the withdrawal queue.
     * Simply decreases the `podOwner`'s shares by `shares`, down to a minimum of zero.
     * @dev This function reverts if it would result in `podOwnerShares[podOwner]` being less than zero, i.e. it is forbidden for this function to
     * result in the `podOwner` incurring a "share deficit". This behavior prevents a Staker from queuing a withdrawal which improperly removes excessive
     * shares from the operator to whom the staker is delegated.
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function removeShares(address podOwner, uint256 shares) external;
    /**
     * @notice Increases the `podOwner`'s shares by `shares`, paying off deficit if possible.
     * Used by the DelegationManager to award a pod owner shares on exiting the withdrawal queue
     * @dev Returns the number of shares added to `podOwnerShares[podOwner]` above zero, which will be less than the `shares` input
     * in the event that the podOwner has an existing shares deficit (i.e. `podOwnerShares[podOwner]` starts below zero)
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function addShares(address podOwner, uint256 shares) external returns (uint256);
    /**
     * @notice Used by the DelegationManager to complete a withdrawal, sending tokens to some destination address
     * @dev Prioritizes decreasing the podOwner's share deficit, if they have one
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function withdrawSharesAsTokens(address podOwner, address destination, uint256 shares) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./IStrategy.sol";
import "./ISlasher.sol";
import "./IDelegationManager.sol";
import "./IEigenPodManager.sol";
/**
 * @title Interface for the primary entrypoint for funds into EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice See the `StrategyManager` contract itself for implementation details.
 */
interface IStrategyManager {
    /**
     * @notice Emitted when a new deposit occurs on behalf of `staker`.
     * @param staker Is the staker who is depositing funds into EigenLayer.
     * @param strategy Is the strategy that `staker` has deposited into.
     * @param token Is the token that `staker` deposited.
     * @param shares Is the number of new shares `staker` has been granted in `strategy`.
     */
    event Deposit(address staker, IERC20 token, IStrategy strategy, uint256 shares);
    /// @notice Emitted when `thirdPartyTransfersForbidden` is updated for a strategy and value by the owner
    event UpdatedThirdPartyTransfersForbidden(IStrategy strategy, bool value);
    /// @notice Emitted when the `strategyWhitelister` is changed
    event StrategyWhitelisterChanged(address previousAddress, address newAddress);
    /// @notice Emitted when a strategy is added to the approved list of strategies for deposit
    event StrategyAddedToDepositWhitelist(IStrategy strategy);
    /// @notice Emitted when a strategy is removed from the approved list of strategies for deposit
    event StrategyRemovedFromDepositWhitelist(IStrategy strategy);
    /**
     * @notice Deposits `amount` of `token` into the specified `strategy`, with the resultant shares credited to `msg.sender`
     * @param strategy is the specified strategy where deposit is to be made,
     * @param token is the denomination in which the deposit is to be made,
     * @param amount is the amount of token to be deposited in the strategy by the staker
     * @return shares The amount of new shares in the `strategy` created as part of the action.
     * @dev The `msg.sender` must have previously approved this contract to transfer at least `amount` of `token` on their behalf.
     * @dev Cannot be called by an address that is 'frozen' (this function will revert if the `msg.sender` is frozen).
     *
     * WARNING: Depositing tokens that allow reentrancy (eg. ERC-777) into a strategy is not recommended.  This can lead to attack vectors
     *          where the token balance and corresponding strategy shares are not in sync upon reentrancy.
     */
    function depositIntoStrategy(IStrategy strategy, IERC20 token, uint256 amount) external returns (uint256 shares);
    /**
     * @notice Used for depositing an asset into the specified strategy with the resultant shares credited to `staker`,
     * who must sign off on the action.
     * Note that the assets are transferred out/from the `msg.sender`, not from the `staker`; this function is explicitly designed
     * purely to help one address deposit 'for' another.
     * @param strategy is the specified strategy where deposit is to be made,
     * @param token is the denomination in which the deposit is to be made,
     * @param amount is the amount of token to be deposited in the strategy by the staker
     * @param staker the staker that the deposited assets will be credited to
     * @param expiry the timestamp at which the signature expires
     * @param signature is a valid signature from the `staker`. either an ECDSA signature if the `staker` is an EOA, or data to forward
     * following EIP-1271 if the `staker` is a contract
     * @return shares The amount of new shares in the `strategy` created as part of the action.
     * @dev The `msg.sender` must have previously approved this contract to transfer at least `amount` of `token` on their behalf.
     * @dev A signature is required for this function to eliminate the possibility of griefing attacks, specifically those
     * targeting stakers who may be attempting to undelegate.
     * @dev Cannot be called if thirdPartyTransfersForbidden is set to true for this strategy
     *
     *  WARNING: Depositing tokens that allow reentrancy (eg. ERC-777) into a strategy is not recommended.  This can lead to attack vectors
     *          where the token balance and corresponding strategy shares are not in sync upon reentrancy
     */
    function depositIntoStrategyWithSignature(
        IStrategy strategy,
        IERC20 token,
        uint256 amount,
        address staker,
        uint256 expiry,
        bytes memory signature
    ) external returns (uint256 shares);
    /// @notice Used by the DelegationManager to remove a Staker's shares from a particular strategy when entering the withdrawal queue
    function removeShares(address staker, IStrategy strategy, uint256 shares) external;
    /// @notice Used by the DelegationManager to award a Staker some shares that have passed through the withdrawal queue
    function addShares(address staker, IERC20 token, IStrategy strategy, uint256 shares) external;
    /// @notice Used by the DelegationManager to convert withdrawn shares to tokens and send them to a recipient
    function withdrawSharesAsTokens(address recipient, IStrategy strategy, uint256 shares, IERC20 token) external;
    /// @notice Returns the current shares of `user` in `strategy`
    function stakerStrategyShares(address user, IStrategy strategy) external view returns (uint256 shares);
    /**
     * @notice Get all details on the staker's deposits and corresponding shares
     * @return (staker's strategies, shares in these strategies)
     */
    function getDeposits(address staker) external view returns (IStrategy[] memory, uint256[] memory);
    /// @notice Simple getter function that returns `stakerStrategyList[staker].length`.
    function stakerStrategyListLength(address staker) external view returns (uint256);
    /**
     * @notice Owner-only function that adds the provided Strategies to the 'whitelist' of strategies that stakers can deposit into
     * @param strategiesToWhitelist Strategies that will be added to the `strategyIsWhitelistedForDeposit` mapping (if they aren't in it already)
     * @param thirdPartyTransfersForbiddenValues bool values to set `thirdPartyTransfersForbidden` to for each strategy
     */
    function addStrategiesToDepositWhitelist(
        IStrategy[] calldata strategiesToWhitelist,
        bool[] calldata thirdPartyTransfersForbiddenValues
    ) external;
    /**
     * @notice Owner-only function that removes the provided Strategies from the 'whitelist' of strategies that stakers can deposit into
     * @param strategiesToRemoveFromWhitelist Strategies that will be removed to the `strategyIsWhitelistedForDeposit` mapping (if they are in it)
     */
    function removeStrategiesFromDepositWhitelist(IStrategy[] calldata strategiesToRemoveFromWhitelist) external;
    /**
     * If true for a strategy, a user cannot depositIntoStrategyWithSignature into that strategy for another staker
     * and also when performing DelegationManager.queueWithdrawals, a staker can only withdraw to themselves.
     * Defaulted to false for all existing strategies.
     * @param strategy The strategy to set `thirdPartyTransfersForbidden` value to
     * @param value bool value to set `thirdPartyTransfersForbidden` to
     */
    function setThirdPartyTransfersForbidden(IStrategy strategy, bool value) external;
    /// @notice Returns the single, central Delegation contract of EigenLayer
    function delegation() external view returns (IDelegationManager);
    /// @notice Returns the single, central Slasher contract of EigenLayer
    function slasher() external view returns (ISlasher);
    /// @notice Returns the EigenPodManager contract of EigenLayer
    function eigenPodManager() external view returns (IEigenPodManager);
    /// @notice Returns the address of the `strategyWhitelister`
    function strategyWhitelister() external view returns (address);
    /// @notice Returns bool for whether or not `strategy` is whitelisted for deposit
    function strategyIsWhitelistedForDeposit(IStrategy strategy) external view returns (bool);
    /**
     * @notice Returns bool for whether or not `strategy` enables credit transfers. i.e enabling
     * depositIntoStrategyWithSignature calls or queueing withdrawals to a different address than the staker.
     */
    function thirdPartyTransfersForbidden(IStrategy strategy) external view returns (bool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./IStrategy.sol";
import "./ISignatureUtils.sol";
/**
 * @title DelegationManager
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice  This is the contract for delegation in EigenLayer. The main functionalities of this contract are
 * - enabling anyone to register as an operator in EigenLayer
 * - allowing operators to specify parameters related to stakers who delegate to them
 * - enabling any staker to delegate its stake to the operator of its choice (a given staker can only delegate to a single operator at a time)
 * - enabling a staker to undelegate its assets from the operator it is delegated to (performed as part of the withdrawal process, initiated through the StrategyManager)
 */
interface IDelegationManager is ISignatureUtils {
    // @notice Struct used for storing information about a single operator who has registered with EigenLayer
    struct OperatorDetails {
        /// @notice DEPRECATED -- this field is no longer used, payments are handled in PaymentCoordinator.sol
        address __deprecated_earningsReceiver;
        /**
         * @notice Address to verify signatures when a staker wishes to delegate to the operator, as well as controlling "forced undelegations".
         * @dev Signature verification follows these rules:
         * 1) If this address is left as address(0), then any staker will be free to delegate to the operator, i.e. no signature verification will be performed.
         * 2) If this address is an EOA (i.e. it has no code), then we follow standard ECDSA signature verification for delegations to the operator.
         * 3) If this address is a contract (i.e. it has code) then we forward a call to the contract and verify that it returns the correct EIP-1271 "magic value".
         */
        address delegationApprover;
        /**
         * @notice A minimum delay -- measured in blocks -- enforced between:
         * 1) the operator signalling their intent to register for a service, via calling `Slasher.optIntoSlashing`
         * and
         * 2) the operator completing registration for the service, via the service ultimately calling `Slasher.recordFirstStakeUpdate`
         * @dev note that for a specific operator, this value *cannot decrease*, i.e. if the operator wishes to modify their OperatorDetails,
         * then they are only allowed to either increase this value or keep it the same.
         */
        uint32 stakerOptOutWindowBlocks;
    }
    /**
     * @notice Abstract struct used in calculating an EIP712 signature for a staker to approve that they (the staker themselves) delegate to a specific operator.
     * @dev Used in computing the `STAKER_DELEGATION_TYPEHASH` and as a reference in the computation of the stakerDigestHash in the `delegateToBySignature` function.
     */
    struct StakerDelegation {
        // the staker who is delegating
        address staker;
        // the operator being delegated to
        address operator;
        // the staker's nonce
        uint256 nonce;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
    /**
     * @notice Abstract struct used in calculating an EIP712 signature for an operator's delegationApprover to approve that a specific staker delegate to the operator.
     * @dev Used in computing the `DELEGATION_APPROVAL_TYPEHASH` and as a reference in the computation of the approverDigestHash in the `_delegate` function.
     */
    struct DelegationApproval {
        // the staker who is delegating
        address staker;
        // the operator being delegated to
        address operator;
        // the operator's provided salt
        bytes32 salt;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
    /**
     * Struct type used to specify an existing queued withdrawal. Rather than storing the entire struct, only a hash is stored.
     * In functions that operate on existing queued withdrawals -- e.g. completeQueuedWithdrawal`, the data is resubmitted and the hash of the submitted
     * data is computed by `calculateWithdrawalRoot` and checked against the stored hash in order to confirm the integrity of the submitted data.
     */
    struct Withdrawal {
        // The address that originated the Withdrawal
        address staker;
        // The address that the staker was delegated to at the time that the Withdrawal was created
        address delegatedTo;
        // The address that can complete the Withdrawal + will receive funds when completing the withdrawal
        address withdrawer;
        // Nonce used to guarantee that otherwise identical withdrawals have unique hashes
        uint256 nonce;
        // Block number when the Withdrawal was created
        uint32 startBlock;
        // Array of strategies that the Withdrawal contains
        IStrategy[] strategies;
        // Array containing the amount of shares in each Strategy in the `strategies` array
        uint256[] shares;
    }
    struct QueuedWithdrawalParams {
        // Array of strategies that the QueuedWithdrawal contains
        IStrategy[] strategies;
        // Array containing the amount of shares in each Strategy in the `strategies` array
        uint256[] shares;
        // The address of the withdrawer
        address withdrawer;
    }
    // @notice Emitted when a new operator registers in EigenLayer and provides their OperatorDetails.
    event OperatorRegistered(address indexed operator, OperatorDetails operatorDetails);
    /// @notice Emitted when an operator updates their OperatorDetails to @param newOperatorDetails
    event OperatorDetailsModified(address indexed operator, OperatorDetails newOperatorDetails);
    /**
     * @notice Emitted when @param operator indicates that they are updating their MetadataURI string
     * @dev Note that these strings are *never stored in storage* and are instead purely emitted in events for off-chain indexing
     */
    event OperatorMetadataURIUpdated(address indexed operator, string metadataURI);
    /// @notice Emitted whenever an operator's shares are increased for a given strategy. Note that shares is the delta in the operator's shares.
    event OperatorSharesIncreased(address indexed operator, address staker, IStrategy strategy, uint256 shares);
    /// @notice Emitted whenever an operator's shares are decreased for a given strategy. Note that shares is the delta in the operator's shares.
    event OperatorSharesDecreased(address indexed operator, address staker, IStrategy strategy, uint256 shares);
    /// @notice Emitted when @param staker delegates to @param operator.
    event StakerDelegated(address indexed staker, address indexed operator);
    /// @notice Emitted when @param staker undelegates from @param operator.
    event StakerUndelegated(address indexed staker, address indexed operator);
    /// @notice Emitted when @param staker is undelegated via a call not originating from the staker themself
    event StakerForceUndelegated(address indexed staker, address indexed operator);
    /**
     * @notice Emitted when a new withdrawal is queued.
     * @param withdrawalRoot Is the hash of the `withdrawal`.
     * @param withdrawal Is the withdrawal itself.
     */
    event WithdrawalQueued(bytes32 withdrawalRoot, Withdrawal withdrawal);
    /// @notice Emitted when a queued withdrawal is completed
    event WithdrawalCompleted(bytes32 withdrawalRoot);
    /// @notice Emitted when the `minWithdrawalDelayBlocks` variable is modified from `previousValue` to `newValue`.
    event MinWithdrawalDelayBlocksSet(uint256 previousValue, uint256 newValue);
    /// @notice Emitted when the `strategyWithdrawalDelayBlocks` variable is modified from `previousValue` to `newValue`.
    event StrategyWithdrawalDelayBlocksSet(IStrategy strategy, uint256 previousValue, uint256 newValue);
    /**
     * @notice Registers the caller as an operator in EigenLayer.
     * @param registeringOperatorDetails is the `OperatorDetails` for the operator.
     * @param metadataURI is a URI for the operator's metadata, i.e. a link providing more details on the operator.
     *
     * @dev Once an operator is registered, they cannot 'deregister' as an operator, and they will forever be considered "delegated to themself".
     * @dev Note that the `metadataURI` is *never stored * and is only emitted in the `OperatorMetadataURIUpdated` event
     */
    function registerAsOperator(
        OperatorDetails calldata registeringOperatorDetails,
        string calldata metadataURI
    ) external;
    /**
     * @notice Updates an operator's stored `OperatorDetails`.
     * @param newOperatorDetails is the updated `OperatorDetails` for the operator, to replace their current OperatorDetails`.
     *
     * @dev The caller must have previously registered as an operator in EigenLayer.
     */
    function modifyOperatorDetails(OperatorDetails calldata newOperatorDetails) external;
    /**
     * @notice Called by an operator to emit an `OperatorMetadataURIUpdated` event indicating the information has updated.
     * @param metadataURI The URI for metadata associated with an operator
     * @dev Note that the `metadataURI` is *never stored * and is only emitted in the `OperatorMetadataURIUpdated` event
     */
    function updateOperatorMetadataURI(string calldata metadataURI) external;
    /**
     * @notice Caller delegates their stake to an operator.
     * @param operator The account (`msg.sender`) is delegating its assets to for use in serving applications built on EigenLayer.
     * @param approverSignatureAndExpiry Verifies the operator approves of this delegation
     * @param approverSalt A unique single use value tied to an individual signature.
     * @dev The approverSignatureAndExpiry is used in the event that:
     *          1) the operator's `delegationApprover` address is set to a non-zero value.
     *                  AND
     *          2) neither the operator nor their `delegationApprover` is the `msg.sender`, since in the event that the operator
     *             or their delegationApprover is the `msg.sender`, then approval is assumed.
     * @dev In the event that `approverSignatureAndExpiry` is not checked, its content is ignored entirely; it's recommended to use an empty input
     * in this case to save on complexity + gas costs
     */
    function delegateTo(
        address operator,
        SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;
    /**
     * @notice Caller delegates a staker's stake to an operator with valid signatures from both parties.
     * @param staker The account delegating stake to an `operator` account
     * @param operator The account (`staker`) is delegating its assets to for use in serving applications built on EigenLayer.
     * @param stakerSignatureAndExpiry Signed data from the staker authorizing delegating stake to an operator
     * @param approverSignatureAndExpiry is a parameter that will be used for verifying that the operator approves of this delegation action in the event that:
     * @param approverSalt Is a salt used to help guarantee signature uniqueness. Each salt can only be used once by a given approver.
     *
     * @dev If `staker` is an EOA, then `stakerSignature` is verified to be a valid ECDSA stakerSignature from `staker`, indicating their intention for this action.
     * @dev If `staker` is a contract, then `stakerSignature` will be checked according to EIP-1271.
     * @dev the operator's `delegationApprover` address is set to a non-zero value.
     * @dev neither the operator nor their `delegationApprover` is the `msg.sender`, since in the event that the operator or their delegationApprover
     * is the `msg.sender`, then approval is assumed.
     * @dev This function will revert if the current `block.timestamp` is equal to or exceeds the expiry
     * @dev In the case that `approverSignatureAndExpiry` is not checked, its content is ignored entirely; it's recommended to use an empty input
     * in this case to save on complexity + gas costs
     */
    function delegateToBySignature(
        address staker,
        address operator,
        SignatureWithExpiry memory stakerSignatureAndExpiry,
        SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;
    /**
     * @notice Undelegates the staker from the operator who they are delegated to. Puts the staker into the "undelegation limbo" mode of the EigenPodManager
     * and queues a withdrawal of all of the staker's shares in the StrategyManager (to the staker), if necessary.
     * @param staker The account to be undelegated.
     * @return withdrawalRoot The root of the newly queued withdrawal, if a withdrawal was queued. Otherwise just bytes32(0).
     *
     * @dev Reverts if the `staker` is also an operator, since operators are not allowed to undelegate from themselves.
     * @dev Reverts if the caller is not the staker, nor the operator who the staker is delegated to, nor the operator's specified "delegationApprover"
     * @dev Reverts if the `staker` is already undelegated.
     */
    function undelegate(address staker) external returns (bytes32[] memory withdrawalRoot);
    /**
     * Allows a staker to withdraw some shares. Withdrawn shares/strategies are immediately removed
     * from the staker. If the staker is delegated, withdrawn shares/strategies are also removed from
     * their operator.
     *
     * All withdrawn shares/strategies are placed in a queue and can be fully withdrawn after a delay.
     */
    function queueWithdrawals(QueuedWithdrawalParams[] calldata queuedWithdrawalParams)
        external
        returns (bytes32[] memory);
    /**
     * @notice Used to complete the specified `withdrawal`. The caller must match `withdrawal.withdrawer`
     * @param withdrawal The Withdrawal to complete.
     * @param tokens Array in which the i-th entry specifies the `token` input to the 'withdraw' function of the i-th Strategy in the `withdrawal.strategies` array.
     * This input can be provided with zero length if `receiveAsTokens` is set to 'false' (since in that case, this input will be unused)
     * @param middlewareTimesIndex is the index in the operator that the staker who triggered the withdrawal was delegated to's middleware times array
     * @param receiveAsTokens If true, the shares specified in the withdrawal will be withdrawn from the specified strategies themselves
     * and sent to the caller, through calls to `withdrawal.strategies[i].withdraw`. If false, then the shares in the specified strategies
     * will simply be transferred to the caller directly.
     * @dev middlewareTimesIndex should be calculated off chain before calling this function by finding the first index that satisfies `slasher.canWithdraw`
     * @dev beaconChainETHStrategy shares are non-transferrable, so if `receiveAsTokens = false` and `withdrawal.withdrawer != withdrawal.staker`, note that
     * any beaconChainETHStrategy shares in the `withdrawal` will be _returned to the staker_, rather than transferred to the withdrawer, unlike shares in
     * any other strategies, which will be transferred to the withdrawer.
     */
    function completeQueuedWithdrawal(
        Withdrawal calldata withdrawal,
        IERC20[] calldata tokens,
        uint256 middlewareTimesIndex,
        bool receiveAsTokens
    ) external;
    /**
     * @notice Array-ified version of `completeQueuedWithdrawal`.
     * Used to complete the specified `withdrawals`. The function caller must match `withdrawals[...].withdrawer`
     * @param withdrawals The Withdrawals to complete.
     * @param tokens Array of tokens for each Withdrawal. See `completeQueuedWithdrawal` for the usage of a single array.
     * @param middlewareTimesIndexes One index to reference per Withdrawal. See `completeQueuedWithdrawal` for the usage of a single index.
     * @param receiveAsTokens Whether or not to complete each withdrawal as tokens. See `completeQueuedWithdrawal` for the usage of a single boolean.
     * @dev See `completeQueuedWithdrawal` for relevant dev tags
     */
    function completeQueuedWithdrawals(
        Withdrawal[] calldata withdrawals,
        IERC20[][] calldata tokens,
        uint256[] calldata middlewareTimesIndexes,
        bool[] calldata receiveAsTokens
    ) external;
    /**
     * @notice Increases a staker's delegated share balance in a strategy.
     * @param staker The address to increase the delegated shares for their operator.
     * @param strategy The strategy in which to increase the delegated shares.
     * @param shares The number of shares to increase.
     *
     * @dev *If the staker is actively delegated*, then increases the `staker`'s delegated shares in `strategy` by `shares`. Otherwise does nothing.
     * @dev Callable only by the StrategyManager or EigenPodManager.
     */
    function increaseDelegatedShares(address staker, IStrategy strategy, uint256 shares) external;
    /**
     * @notice Decreases a staker's delegated share balance in a strategy.
     * @param staker The address to increase the delegated shares for their operator.
     * @param strategy The strategy in which to decrease the delegated shares.
     * @param shares The number of shares to decrease.
     *
     * @dev *If the staker is actively delegated*, then decreases the `staker`'s delegated shares in `strategy` by `shares`. Otherwise does nothing.
     * @dev Callable only by the StrategyManager or EigenPodManager.
     */
    function decreaseDelegatedShares(address staker, IStrategy strategy, uint256 shares) external;
    /**
     * @notice returns the address of the operator that `staker` is delegated to.
     * @notice Mapping: staker => operator whom the staker is currently delegated to.
     * @dev Note that returning address(0) indicates that the staker is not actively delegated to any operator.
     */
    function delegatedTo(address staker) external view returns (address);
    /**
     * @notice Returns the OperatorDetails struct associated with an `operator`.
     */
    function operatorDetails(address operator) external view returns (OperatorDetails memory);
    /**
     * @notice Returns the delegationApprover account for an operator
     */
    function delegationApprover(address operator) external view returns (address);
    /**
     * @notice Returns the stakerOptOutWindowBlocks for an operator
     */
    function stakerOptOutWindowBlocks(address operator) external view returns (uint256);
    /**
     * @notice Given array of strategies, returns array of shares for the operator
     */
    function getOperatorShares(
        address operator,
        IStrategy[] memory strategies
    ) external view returns (uint256[] memory);
    /**
     * @notice Given a list of strategies, return the minimum number of blocks that must pass to withdraw
     * from all the inputted strategies. Return value is >= minWithdrawalDelayBlocks as this is the global min withdrawal delay.
     * @param strategies The strategies to check withdrawal delays for
     */
    function getWithdrawalDelay(IStrategy[] calldata strategies) external view returns (uint256);
    /**
     * @notice returns the total number of shares in `strategy` that are delegated to `operator`.
     * @notice Mapping: operator => strategy => total number of shares in the strategy delegated to the operator.
     * @dev By design, the following invariant should hold for each Strategy:
     * (operator's shares in delegation manager) = sum (shares above zero of all stakers delegated to operator)
     * = sum (delegateable shares of all stakers delegated to the operator)
     */
    function operatorShares(address operator, IStrategy strategy) external view returns (uint256);
    /**
     * @notice Returns 'true' if `staker` *is* actively delegated, and 'false' otherwise.
     */
    function isDelegated(address staker) external view returns (bool);
    /**
     * @notice Returns true is an operator has previously registered for delegation.
     */
    function isOperator(address operator) external view returns (bool);
    /// @notice Mapping: staker => number of signed delegation nonces (used in `delegateToBySignature`) from the staker that the contract has already checked
    function stakerNonce(address staker) external view returns (uint256);
    /**
     * @notice Mapping: delegationApprover => 32-byte salt => whether or not the salt has already been used by the delegationApprover.
     * @dev Salts are used in the `delegateTo` and `delegateToBySignature` functions. Note that these functions only process the delegationApprover's
     * signature + the provided salt if the operator being delegated to has specified a nonzero address as their `delegationApprover`.
     */
    function delegationApproverSaltIsSpent(address _delegationApprover, bytes32 salt) external view returns (bool);
    /**
     * @notice Minimum delay enforced by this contract for completing queued withdrawals. Measured in blocks, and adjustable by this contract's owner,
     * up to a maximum of `MAX_WITHDRAWAL_DELAY_BLOCKS`. Minimum value is 0 (i.e. no delay enforced).
     * Note that strategies each have a separate withdrawal delay, which can be greater than this value. So the minimum number of blocks that must pass
     * to withdraw a strategy is MAX(minWithdrawalDelayBlocks, strategyWithdrawalDelayBlocks[strategy])
     */
    function minWithdrawalDelayBlocks() external view returns (uint256);
    /**
     * @notice Minimum delay enforced by this contract per Strategy for completing queued withdrawals. Measured in blocks, and adjustable by this contract's owner,
     * up to a maximum of `MAX_WITHDRAWAL_DELAY_BLOCKS`. Minimum value is 0 (i.e. no delay enforced).
     */
    function strategyWithdrawalDelayBlocks(IStrategy strategy) external view returns (uint256);
    /// @notice return address of the beaconChainETHStrategy
    function beaconChainETHStrategy() external view returns (IStrategy);
    /**
     * @notice Calculates the digestHash for a `staker` to sign to delegate to an `operator`
     * @param staker The signing staker
     * @param operator The operator who is being delegated to
     * @param expiry The desired expiry time of the staker's signature
     */
    function calculateCurrentStakerDelegationDigestHash(
        address staker,
        address operator,
        uint256 expiry
    ) external view returns (bytes32);
    /**
     * @notice Calculates the digest hash to be signed and used in the `delegateToBySignature` function
     * @param staker The signing staker
     * @param _stakerNonce The nonce of the staker. In practice we use the staker's current nonce, stored at `stakerNonce[staker]`
     * @param operator The operator who is being delegated to
     * @param expiry The desired expiry time of the staker's signature
     */
    function calculateStakerDelegationDigestHash(
        address staker,
        uint256 _stakerNonce,
        address operator,
        uint256 expiry
    ) external view returns (bytes32);
    /**
     * @notice Calculates the digest hash to be signed by the operator's delegationApprove and used in the `delegateTo` and `delegateToBySignature` functions.
     * @param staker The account delegating their stake
     * @param operator The account receiving delegated stake
     * @param _delegationApprover the operator's `delegationApprover` who will be signing the delegationHash (in general)
     * @param approverSalt A unique and single use value associated with the approver signature.
     * @param expiry Time after which the approver's signature becomes invalid
     */
    function calculateDelegationApprovalDigestHash(
        address staker,
        address operator,
        address _delegationApprover,
        bytes32 approverSalt,
        uint256 expiry
    ) external view returns (bytes32);
    /// @notice The EIP-712 typehash for the contract's domain
    function DOMAIN_TYPEHASH() external view returns (bytes32);
    /// @notice The EIP-712 typehash for the StakerDelegation struct used by the contract
    function STAKER_DELEGATION_TYPEHASH() external view returns (bytes32);
    /// @notice The EIP-712 typehash for the DelegationApproval struct used by the contract
    function DELEGATION_APPROVAL_TYPEHASH() external view returns (bytes32);
    /**
     * @notice Getter function for the current EIP-712 domain separator for this contract.
     *
     * @dev The domain separator will change in the event of a fork that changes the ChainID.
     * @dev By introducing a domain separator the DApp developers are guaranteed that there can be no signature collision.
     * for more detailed information please read EIP-712.
     */
    function domainSeparator() external view returns (bytes32);
    /// @notice Mapping: staker => cumulative number of queued withdrawals they have ever initiated.
    /// @dev This only increments (doesn't decrement), and is used to help ensure that otherwise identical withdrawals have unique hashes.
    function cumulativeWithdrawalsQueued(address staker) external view returns (uint256);
    /// @notice Returns the keccak256 hash of `withdrawal`.
    function calculateWithdrawalRoot(Withdrawal memory withdrawal) external pure returns (bytes32);
}
// ┏━━━┓━┏┓━┏┓━━┏━━━┓━━┏━━━┓━━━━┏━━━┓━━━━━━━━━━━━━━━━━━━┏┓━━━━━┏━━━┓━━━━━━━━━┏┓━━━━━━━━━━━━━━┏┓━
// ┃┏━━┛┏┛┗┓┃┃━━┃┏━┓┃━━┃┏━┓┃━━━━┗┓┏┓┃━━━━━━━━━━━━━━━━━━┏┛┗┓━━━━┃┏━┓┃━━━━━━━━┏┛┗┓━━━━━━━━━━━━┏┛┗┓
// ┃┗━━┓┗┓┏┛┃┗━┓┗┛┏┛┃━━┃┃━┃┃━━━━━┃┃┃┃┏━━┓┏━━┓┏━━┓┏━━┓┏┓┗┓┏┛━━━━┃┃━┗┛┏━━┓┏━┓━┗┓┏┛┏━┓┏━━┓━┏━━┓┗┓┏┛
// ┃┏━━┛━┃┃━┃┏┓┃┏━┛┏┛━━┃┃━┃┃━━━━━┃┃┃┃┃┏┓┃┃┏┓┃┃┏┓┃┃━━┫┣┫━┃┃━━━━━┃┃━┏┓┃┏┓┃┃┏┓┓━┃┃━┃┏┛┗━┓┃━┃┏━┛━┃┃━
// ┃┗━━┓━┃┗┓┃┃┃┃┃┃┗━┓┏┓┃┗━┛┃━━━━┏┛┗┛┃┃┃━┫┃┗┛┃┃┗┛┃┣━━┃┃┃━┃┗┓━━━━┃┗━┛┃┃┗┛┃┃┃┃┃━┃┗┓┃┃━┃┗┛┗┓┃┗━┓━┃┗┓
// ┗━━━┛━┗━┛┗┛┗┛┗━━━┛┗┛┗━━━┛━━━━┗━━━┛┗━━┛┃┏━┛┗━━┛┗━━┛┗┛━┗━┛━━━━┗━━━┛┗━━┛┗┛┗┛━┗━┛┗┛━┗━━━┛┗━━┛━┗━┛
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┃┃━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┗┛━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// SPDX-License-Identifier: CC0-1.0
pragma solidity >=0.5.0;
// This interface is designed to be compatible with the Vyper version.
/// @notice This is the Ethereum 2.0 deposit contract interface.
/// For more information see the Phase 0 specification under https://github.com/ethereum/eth2.0-specs
interface IETHPOSDeposit {
    /// @notice A processed deposit event.
    event DepositEvent(bytes pubkey, bytes withdrawal_credentials, bytes amount, bytes signature, bytes index);
    /// @notice Submit a Phase 0 DepositData object.
    /// @param pubkey A BLS12-381 public key.
    /// @param withdrawal_credentials Commitment to a public key for withdrawals.
    /// @param signature A BLS12-381 signature.
    /// @param deposit_data_root The SHA-256 hash of the SSZ-encoded DepositData object.
    /// Used as a protection against malformed input.
    function deposit(
        bytes calldata pubkey,
        bytes calldata withdrawal_credentials,
        bytes calldata signature,
        bytes32 deposit_data_root
    ) external payable;
    /// @notice Query the current deposit root hash.
    /// @return The deposit root hash.
    function get_deposit_root() external view returns (bytes32);
    /// @notice Query the current deposit count.
    /// @return The deposit count encoded as a little endian 64-bit number.
    function get_deposit_count() external view returns (bytes memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "../libraries/BeaconChainProofs.sol";
import "./IEigenPodManager.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
 * @title The implementation contract used for restaking beacon chain ETH on EigenLayer
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @dev Note that all beacon chain balances are stored as gwei within the beacon chain datastructures. We choose
 *   to account balances in terms of gwei in the EigenPod contract and convert to wei when making calls to other contracts
 */
interface IEigenPod {
    /**
     *
     *                                STRUCTS / ENUMS
     *
     */
    enum VALIDATOR_STATUS {
        INACTIVE, // doesnt exist
        ACTIVE, // staked on ethpos and withdrawal credentials are pointed to the EigenPod
        WITHDRAWN // withdrawn from the Beacon Chain
    }
    struct ValidatorInfo {
        // index of the validator in the beacon chain
        uint64 validatorIndex;
        // amount of beacon chain ETH restaked on EigenLayer in gwei
        uint64 restakedBalanceGwei;
        //timestamp of the validator's most recent balance update
        uint64 lastCheckpointedAt;
        // status of the validator
        VALIDATOR_STATUS status;
    }
    struct Checkpoint {
        bytes32 beaconBlockRoot;
        uint24 proofsRemaining;
        uint64 podBalanceGwei;
        int128 balanceDeltasGwei;
    }
    /**
     *
     *                                    EVENTS
     *
     */
    /// @notice Emitted when an ETH validator stakes via this eigenPod
    event EigenPodStaked(bytes pubkey);
    /// @notice Emitted when a pod owner updates the proof submitter address
    event ProofSubmitterUpdated(address prevProofSubmitter, address newProofSubmitter);
    /// @notice Emitted when an ETH validator's withdrawal credentials are successfully verified to be pointed to this eigenPod
    event ValidatorRestaked(uint40 validatorIndex);
    /// @notice Emitted when an ETH validator's  balance is proven to be updated.  Here newValidatorBalanceGwei
    //  is the validator's balance that is credited on EigenLayer.
    event ValidatorBalanceUpdated(uint40 validatorIndex, uint64 balanceTimestamp, uint64 newValidatorBalanceGwei);
    /// @notice Emitted when restaked beacon chain ETH is withdrawn from the eigenPod.
    event RestakedBeaconChainETHWithdrawn(address indexed recipient, uint256 amount);
    /// @notice Emitted when ETH is received via the `receive` fallback
    event NonBeaconChainETHReceived(uint256 amountReceived);
    /// @notice Emitted when a checkpoint is created
    event CheckpointCreated(
        uint64 indexed checkpointTimestamp, bytes32 indexed beaconBlockRoot, uint256 validatorCount
    );
    /// @notice Emitted when a checkpoint is finalized
    event CheckpointFinalized(uint64 indexed checkpointTimestamp, int256 totalShareDeltaWei);
    /// @notice Emitted when a validator is proven for a given checkpoint
    event ValidatorCheckpointed(uint64 indexed checkpointTimestamp, uint40 indexed validatorIndex);
    /// @notice Emitted when a validaor is proven to have 0 balance at a given checkpoint
    event ValidatorWithdrawn(uint64 indexed checkpointTimestamp, uint40 indexed validatorIndex);
    /**
     *
     *                       EXTERNAL STATE-CHANGING METHODS
     *
     */
    /// @notice Used to initialize the pointers to contracts crucial to the pod's functionality, in beacon proxy construction from EigenPodManager
    function initialize(address owner) external;
    /// @notice Called by EigenPodManager when the owner wants to create another ETH validator.
    function stake(bytes calldata pubkey, bytes calldata signature, bytes32 depositDataRoot) external payable;
    /**
     * @notice Transfers `amountWei` in ether from this contract to the specified `recipient` address
     * @notice Called by EigenPodManager to withdrawBeaconChainETH that has been added to the EigenPod's balance due to a withdrawal from the beacon chain.
     * @dev The podOwner must have already proved sufficient withdrawals, so that this pod's `withdrawableRestakedExecutionLayerGwei` exceeds the
     * `amountWei` input (when converted to GWEI).
     * @dev Reverts if `amountWei` is not a whole Gwei amount
     */
    function withdrawRestakedBeaconChainETH(address recipient, uint256 amount) external;
    /**
     * @dev Create a checkpoint used to prove this pod's active validator set. Checkpoints are completed
     * by submitting one checkpoint proof per ACTIVE validator. During the checkpoint process, the total
     * change in ACTIVE validator balance is tracked, and any validators with 0 balance are marked `WITHDRAWN`.
     * @dev Once finalized, the pod owner is awarded shares corresponding to:
     * - the total change in their ACTIVE validator balances
     * - any ETH in the pod not already awarded shares
     * @dev A checkpoint cannot be created if the pod already has an outstanding checkpoint. If
     * this is the case, the pod owner MUST complete the existing checkpoint before starting a new one.
     * @param revertIfNoBalance Forces a revert if the pod ETH balance is 0. This allows the pod owner
     * to prevent accidentally starting a checkpoint that will not increase their shares
     */
    function startCheckpoint(bool revertIfNoBalance) external;
    /**
     * @dev Progress the current checkpoint towards completion by submitting one or more validator
     * checkpoint proofs. Anyone can call this method to submit proofs towards the current checkpoint.
     * For each validator proven, the current checkpoint's `proofsRemaining` decreases.
     * @dev If the checkpoint's `proofsRemaining` reaches 0, the checkpoint is finalized.
     * (see `_updateCheckpoint` for more details)
     * @dev This method can only be called when there is a currently-active checkpoint.
     * @param balanceContainerProof proves the beacon's current balance container root against a checkpoint's `beaconBlockRoot`
     * @param proofs Proofs for one or more validator current balances against the `balanceContainerRoot`
     */
    function verifyCheckpointProofs(
        BeaconChainProofs.BalanceContainerProof calldata balanceContainerProof,
        BeaconChainProofs.BalanceProof[] calldata proofs
    ) external;
    /**
     * @dev Verify one or more validators have their withdrawal credentials pointed at this EigenPod, and award
     * shares based on their effective balance. Proven validators are marked `ACTIVE` within the EigenPod, and
     * future checkpoint proofs will need to include them.
     * @dev Withdrawal credential proofs MUST NOT be older than `currentCheckpointTimestamp`.
     * @dev Validators proven via this method MUST NOT have an exit epoch set already.
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param validatorIndices a list of validator indices being proven
     * @param validatorFieldsProofs proofs of each validator's `validatorFields` against the beacon state root
     * @param validatorFields the fields of the beacon chain "Validator" container. See consensus specs for
     * details: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     */
    function verifyWithdrawalCredentials(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        uint40[] calldata validatorIndices,
        bytes[] calldata validatorFieldsProofs,
        bytes32[][] calldata validatorFields
    ) external;
    /**
     * @dev Prove that one of this pod's active validators was slashed on the beacon chain. A successful
     * staleness proof allows the caller to start a checkpoint.
     *
     * @dev Note that in order to start a checkpoint, any existing checkpoint must already be completed!
     * (See `_startCheckpoint` for details)
     *
     * @dev Note that this method allows anyone to start a checkpoint as soon as a slashing occurs on the beacon
     * chain. This is intended to make it easier to external watchers to keep a pod's balance up to date.
     *
     * @dev Note too that beacon chain slashings are not instant. There is a delay between the initial slashing event
     * and the validator's final exit back to the execution layer. During this time, the validator's balance may or
     * may not drop further due to a correlation penalty. This method allows proof of a slashed validator
     * to initiate a checkpoint for as long as the validator remains on the beacon chain. Once the validator
     * has exited and been checkpointed at 0 balance, they are no longer "checkpoint-able" and cannot be proven
     * "stale" via this method.
     * See https://eth2book.info/capella/part3/transition/epoch/#slashings for more info.
     *
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param proof the fields of the beacon chain "Validator" container, along with a merkle proof against
     * the beacon state root. See the consensus specs for more details:
     * https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     *
     * @dev Staleness conditions:
     * - Validator's last checkpoint is older than `beaconTimestamp`
     * - Validator MUST be in `ACTIVE` status in the pod
     * - Validator MUST be slashed on the beacon chain
     */
    function verifyStaleBalance(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        BeaconChainProofs.ValidatorProof calldata proof
    ) external;
    /// @notice called by owner of a pod to remove any ERC20s deposited in the pod
    function recoverTokens(IERC20[] memory tokenList, uint256[] memory amountsToWithdraw, address recipient) external;
    /// @notice Allows the owner of a pod to update the proof submitter, a permissioned
    /// address that can call `startCheckpoint` and `verifyWithdrawalCredentials`.
    /// @dev Note that EITHER the podOwner OR proofSubmitter can access these methods,
    /// so it's fine to set your proofSubmitter to 0 if you want the podOwner to be the
    /// only address that can call these methods.
    /// @param newProofSubmitter The new proof submitter address. If set to 0, only the
    /// pod owner will be able to call `startCheckpoint` and `verifyWithdrawalCredentials`
    function setProofSubmitter(address newProofSubmitter) external;
    /**
     *
     *                                VIEW METHODS
     *
     */
    /// @notice An address with permissions to call `startCheckpoint` and `verifyWithdrawalCredentials`, set
    /// by the podOwner. This role exists to allow a podOwner to designate a hot wallet that can call
    /// these methods, allowing the podOwner to remain a cold wallet that is only used to manage funds.
    /// @dev If this address is NOT set, only the podOwner can call `startCheckpoint` and `verifyWithdrawalCredentials`
    function proofSubmitter() external view returns (address);
    /// @notice the amount of execution layer ETH in this contract that is staked in EigenLayer (i.e. withdrawn from beaconchain but not EigenLayer),
    function withdrawableRestakedExecutionLayerGwei() external view returns (uint64);
    /// @notice The single EigenPodManager for EigenLayer
    function eigenPodManager() external view returns (IEigenPodManager);
    /// @notice The owner of this EigenPod
    function podOwner() external view returns (address);
    /// @notice Returns the validatorInfo struct for the provided pubkeyHash
    function validatorPubkeyHashToInfo(bytes32 validatorPubkeyHash) external view returns (ValidatorInfo memory);
    /// @notice Returns the validatorInfo struct for the provided pubkey
    function validatorPubkeyToInfo(bytes calldata validatorPubkey) external view returns (ValidatorInfo memory);
    /// @notice This returns the status of a given validator
    function validatorStatus(bytes32 pubkeyHash) external view returns (VALIDATOR_STATUS);
    /// @notice This returns the status of a given validator pubkey
    function validatorStatus(bytes calldata validatorPubkey) external view returns (VALIDATOR_STATUS);
    /// @notice Number of validators with proven withdrawal credentials, who do not have proven full withdrawals
    function activeValidatorCount() external view returns (uint256);
    /// @notice The timestamp of the last checkpoint finalized
    function lastCheckpointTimestamp() external view returns (uint64);
    /// @notice The timestamp of the currently-active checkpoint. Will be 0 if there is not active checkpoint
    function currentCheckpointTimestamp() external view returns (uint64);
    /// @notice Returns the currently-active checkpoint
    function currentCheckpoint() external view returns (Checkpoint memory);
    /// @notice For each checkpoint, the total balance attributed to exited validators, in gwei
    ///
    /// NOTE that the values added to this mapping are NOT guaranteed to capture the entirety of a validator's
    /// exit - rather, they capture the total change in a validator's balance when a checkpoint shows their
    /// balance change from nonzero to zero. While a change from nonzero to zero DOES guarantee that a validator
    /// has been fully exited, it is possible that the magnitude of this change does not capture what is
    /// typically thought of as a "full exit."
    ///
    /// For example:
    /// 1. Consider a validator was last checkpointed at 32 ETH before exiting. Once the exit has been processed,
    /// it is expected that the validator's exited balance is calculated to be `32 ETH`.
    /// 2. However, before `startCheckpoint` is called, a deposit is made to the validator for 1 ETH. The beacon
    /// chain will automatically withdraw this ETH, but not until the withdrawal sweep passes over the validator
    /// again. Until this occurs, the validator's current balance (used for checkpointing) is 1 ETH.
    /// 3. If `startCheckpoint` is called at this point, the balance delta calculated for this validator will be
    /// `-31 ETH`, and because the validator has a nonzero balance, it is not marked WITHDRAWN.
    /// 4. After the exit is processed by the beacon chain, a subsequent `startCheckpoint` and checkpoint proof
    /// will calculate a balance delta of `-1 ETH` and attribute a 1 ETH exit to the validator.
    ///
    /// If this edge case impacts your usecase, it should be possible to mitigate this by monitoring for deposits
    /// to your exited validators, and waiting to call `startCheckpoint` until those deposits have been automatically
    /// exited.
    ///
    /// Additional edge cases this mapping does not cover:
    /// - If a validator is slashed, their balance exited will reflect their original balance rather than the slashed amount
    /// - The final partial withdrawal for an exited validator will be likely be included in this mapping.
    ///   i.e. if a validator was last checkpointed at 32.1 ETH before exiting, the next checkpoint will calculate their
    ///   "exited" amount to be 32.1 ETH rather than 32 ETH.
    function checkpointBalanceExitedGwei(uint64) external view returns (uint64);
    /// @notice Query the 4788 oracle to get the parent block root of the slot with the given `timestamp`
    /// @param timestamp of the block for which the parent block root will be returned. MUST correspond
    /// to an existing slot within the last 24 hours. If the slot at `timestamp` was skipped, this method
    /// will revert.
    function getParentBlockRoot(uint64 timestamp) external view returns (bytes32);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
/**
 * @title Interface for the `PauserRegistry` contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface IPauserRegistry {
    event PauserStatusChanged(address pauser, bool canPause);
    event UnpauserChanged(address previousUnpauser, address newUnpauser);
    /// @notice Mapping of addresses to whether they hold the pauser role.
    function isPauser(address pauser) external view returns (bool);
    /// @notice Unique address that holds the unpauser role. Capable of changing *both* the pauser and unpauser addresses.
    function unpauser() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./IStrategyManager.sol";
import "./IDelegationManager.sol";
/**
 * @title Interface for the primary 'slashing' contract for EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice See the `Slasher` contract itself for implementation details.
 */
interface ISlasher {
    // struct used to store information about the current state of an operator's obligations to middlewares they are serving
    struct MiddlewareTimes {
        // The update block for the middleware whose most recent update was earliest, i.e. the 'stalest' update out of all middlewares the operator is serving
        uint32 stalestUpdateBlock;
        // The latest 'serveUntilBlock' from all of the middleware that the operator is serving
        uint32 latestServeUntilBlock;
    }
    // struct used to store details relevant to a single middleware that an operator has opted-in to serving
    struct MiddlewareDetails {
        // the block at which the contract begins being able to finalize the operator's registration with the service via calling `recordFirstStakeUpdate`
        uint32 registrationMayBeginAtBlock;
        // the block before which the contract is allowed to slash the user
        uint32 contractCanSlashOperatorUntilBlock;
        // the block at which the middleware's view of the operator's stake was most recently updated
        uint32 latestUpdateBlock;
    }
    /// @notice Emitted when a middleware times is added to `operator`'s array.
    event MiddlewareTimesAdded(
        address operator, uint256 index, uint32 stalestUpdateBlock, uint32 latestServeUntilBlock
    );
    /// @notice Emitted when `operator` begins to allow `contractAddress` to slash them.
    event OptedIntoSlashing(address indexed operator, address indexed contractAddress);
    /// @notice Emitted when `contractAddress` signals that it will no longer be able to slash `operator` after the `contractCanSlashOperatorUntilBlock`.
    event SlashingAbilityRevoked(
        address indexed operator, address indexed contractAddress, uint32 contractCanSlashOperatorUntilBlock
    );
    /**
     * @notice Emitted when `slashingContract` 'freezes' the `slashedOperator`.
     * @dev The `slashingContract` must have permission to slash the `slashedOperator`, i.e. `canSlash(slasherOperator, slashingContract)` must return 'true'.
     */
    event OperatorFrozen(address indexed slashedOperator, address indexed slashingContract);
    /// @notice Emitted when `previouslySlashedAddress` is 'unfrozen', allowing them to again move deposited funds within EigenLayer.
    event FrozenStatusReset(address indexed previouslySlashedAddress);
    /**
     * @notice Gives the `contractAddress` permission to slash the funds of the caller.
     * @dev Typically, this function must be called prior to registering for a middleware.
     */
    function optIntoSlashing(address contractAddress) external;
    /**
     * @notice Used for 'slashing' a certain operator.
     * @param toBeFrozen The operator to be frozen.
     * @dev Technically the operator is 'frozen' (hence the name of this function), and then subject to slashing pending a decision by a human-in-the-loop.
     * @dev The operator must have previously given the caller (which should be a contract) the ability to slash them, through a call to `optIntoSlashing`.
     */
    function freezeOperator(address toBeFrozen) external;
    /**
     * @notice Removes the 'frozen' status from each of the `frozenAddresses`
     * @dev Callable only by the contract owner (i.e. governance).
     */
    function resetFrozenStatus(address[] calldata frozenAddresses) external;
    /**
     * @notice this function is a called by middlewares during an operator's registration to make sure the operator's stake at registration
     *         is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at the current block is slashable
     * @dev adds the middleware's slashing contract to the operator's linked list
     */
    function recordFirstStakeUpdate(address operator, uint32 serveUntilBlock) external;
    /**
     * @notice this function is a called by middlewares during a stake update for an operator (perhaps to free pending withdrawals)
     *         to make sure the operator's stake at updateBlock is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param updateBlock the block for which the stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at updateBlock is slashable
     * @param insertAfter the element of the operators linked list that the currently updating middleware should be inserted after
     * @dev insertAfter should be calculated offchain before making the transaction that calls this. this is subject to race conditions,
     *      but it is anticipated to be rare and not detrimental.
     */
    function recordStakeUpdate(
        address operator,
        uint32 updateBlock,
        uint32 serveUntilBlock,
        uint256 insertAfter
    ) external;
    /**
     * @notice this function is a called by middlewares during an operator's deregistration to make sure the operator's stake at deregistration
     *         is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at the current block is slashable
     * @dev removes the middleware's slashing contract to the operator's linked list and revokes the middleware's (i.e. caller's) ability to
     * slash `operator` once `serveUntil` is reached
     */
    function recordLastStakeUpdateAndRevokeSlashingAbility(address operator, uint32 serveUntilBlock) external;
    /// @notice The StrategyManager contract of EigenLayer
    function strategyManager() external view returns (IStrategyManager);
    /// @notice The DelegationManager contract of EigenLayer
    function delegation() external view returns (IDelegationManager);
    /**
     * @notice Used to determine whether `staker` is actively 'frozen'. If a staker is frozen, then they are potentially subject to
     * slashing of their funds, and cannot cannot deposit or withdraw from the strategyManager until the slashing process is completed
     * and the staker's status is reset (to 'unfrozen').
     * @param staker The staker of interest.
     * @return Returns 'true' if `staker` themselves has their status set to frozen, OR if the staker is delegated
     * to an operator who has their status set to frozen. Otherwise returns 'false'.
     */
    function isFrozen(address staker) external view returns (bool);
    /// @notice Returns true if `slashingContract` is currently allowed to slash `toBeSlashed`.
    function canSlash(address toBeSlashed, address slashingContract) external view returns (bool);
    /// @notice Returns the block until which `serviceContract` is allowed to slash the `operator`.
    function contractCanSlashOperatorUntilBlock(
        address operator,
        address serviceContract
    ) external view returns (uint32);
    /// @notice Returns the block at which the `serviceContract` last updated its view of the `operator`'s stake
    function latestUpdateBlock(address operator, address serviceContract) external view returns (uint32);
    /// @notice A search routine for finding the correct input value of `insertAfter` to `recordStakeUpdate` / `_updateMiddlewareList`.
    function getCorrectValueForInsertAfter(address operator, uint32 updateBlock) external view returns (uint256);
    /**
     * @notice Returns 'true' if `operator` can currently complete a withdrawal started at the `withdrawalStartBlock`, with `middlewareTimesIndex` used
     * to specify the index of a `MiddlewareTimes` struct in the operator's list (i.e. an index in `operatorToMiddlewareTimes[operator]`). The specified
     * struct is consulted as proof of the `operator`'s ability (or lack thereof) to complete the withdrawal.
     * This function will return 'false' if the operator cannot currently complete a withdrawal started at the `withdrawalStartBlock`, *or* in the event
     * that an incorrect `middlewareTimesIndex` is supplied, even if one or more correct inputs exist.
     * @param operator Either the operator who queued the withdrawal themselves, or if the withdrawing party is a staker who delegated to an operator,
     * this address is the operator *who the staker was delegated to* at the time of the `withdrawalStartBlock`.
     * @param withdrawalStartBlock The block number at which the withdrawal was initiated.
     * @param middlewareTimesIndex Indicates an index in `operatorToMiddlewareTimes[operator]` to consult as proof of the `operator`'s ability to withdraw
     * @dev The correct `middlewareTimesIndex` input should be computable off-chain.
     */
    function canWithdraw(
        address operator,
        uint32 withdrawalStartBlock,
        uint256 middlewareTimesIndex
    ) external returns (bool);
    /**
     * operator =>
     *  [
     *      (
     *          the least recent update block of all of the middlewares it's serving/served,
     *          latest time that the stake bonded at that update needed to serve until
     *      )
     *  ]
     */
    function operatorToMiddlewareTimes(
        address operator,
        uint256 arrayIndex
    ) external view returns (MiddlewareTimes memory);
    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator].length`
    function middlewareTimesLength(address operator) external view returns (uint256);
    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator][index].stalestUpdateBlock`.
    function getMiddlewareTimesIndexStalestUpdateBlock(address operator, uint32 index) external view returns (uint32);
    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator][index].latestServeUntil`.
    function getMiddlewareTimesIndexServeUntilBlock(address operator, uint32 index) external view returns (uint32);
    /// @notice Getter function for fetching `_operatorToWhitelistedContractsByUpdate[operator].size`.
    function operatorWhitelistedContractsLinkedListSize(address operator) external view returns (uint256);
    /// @notice Getter function for fetching a single node in the operator's linked list (`_operatorToWhitelistedContractsByUpdate[operator]`).
    function operatorWhitelistedContractsLinkedListEntry(
        address operator,
        address node
    ) external view returns (bool, uint256, uint256);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
/**
 * @title The interface for common signature utilities.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface ISignatureUtils {
    // @notice Struct that bundles together a signature and an expiration time for the signature. Used primarily for stack management.
    struct SignatureWithExpiry {
        // the signature itself, formatted as a single bytes object
        bytes signature;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
    // @notice Struct that bundles together a signature, a salt for uniqueness, and an expiration time for the signature. Used primarily for stack management.
    struct SignatureWithSaltAndExpiry {
        // the signature itself, formatted as a single bytes object
        bytes signature;
        // the salt used to generate the signature
        bytes32 salt;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import "./Merkle.sol";
import "../libraries/Endian.sol";
//Utility library for parsing and PHASE0 beacon chain block headers
//SSZ Spec: https://github.com/ethereum/consensus-specs/blob/dev/ssz/simple-serialize.md#merkleization
//BeaconBlockHeader Spec: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconblockheader
//BeaconState Spec: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconstate
library BeaconChainProofs {
    /// @notice Heights of various merkle trees in the beacon chain
    /// - beaconBlockRoot
    /// |                                             HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
    /// -- beaconStateRoot
    /// |                                             HEIGHT: BEACON_STATE_TREE_HEIGHT
    /// validatorContainerRoot, balanceContainerRoot
    /// |                       |                     HEIGHT: BALANCE_TREE_HEIGHT
    /// |                       individual balances
    /// |                                             HEIGHT: VALIDATOR_TREE_HEIGHT
    /// individual validators
    uint256 internal constant BEACON_BLOCK_HEADER_TREE_HEIGHT = 3;
    uint256 internal constant BEACON_STATE_TREE_HEIGHT = 5;
    uint256 internal constant BALANCE_TREE_HEIGHT = 38;
    uint256 internal constant VALIDATOR_TREE_HEIGHT = 40;
    /// @notice Index of the beaconStateRoot in the `BeaconBlockHeader` container
    ///
    /// BeaconBlockHeader = [..., state_root, ...]
    ///                      0...      3
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconblockheader)
    uint256 internal constant STATE_ROOT_INDEX = 3;
    /// @notice Indices for fields in the `BeaconState` container
    ///
    /// BeaconState = [..., validators, balances, ...]
    ///                0...     11         12
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/capella/beacon-chain.md#beaconstate)
    uint256 internal constant VALIDATOR_CONTAINER_INDEX = 11;
    uint256 internal constant BALANCE_CONTAINER_INDEX = 12;
    /// @notice Number of fields in the `Validator` container
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator)
    uint256 internal constant VALIDATOR_FIELDS_LENGTH = 8;
    /// @notice Indices for fields in the `Validator` container
    uint256 internal constant VALIDATOR_PUBKEY_INDEX = 0;
    uint256 internal constant VALIDATOR_WITHDRAWAL_CREDENTIALS_INDEX = 1;
    uint256 internal constant VALIDATOR_BALANCE_INDEX = 2;
    uint256 internal constant VALIDATOR_SLASHED_INDEX = 3;
    uint256 internal constant VALIDATOR_ACTIVATION_EPOCH_INDEX = 5;
    uint256 internal constant VALIDATOR_EXIT_EPOCH_INDEX = 6;
    /// @notice Slot/Epoch timings
    uint64 internal constant SECONDS_PER_SLOT = 12;
    uint64 internal constant SLOTS_PER_EPOCH = 32;
    uint64 internal constant SECONDS_PER_EPOCH = SLOTS_PER_EPOCH * SECONDS_PER_SLOT;
    /// @notice `FAR_FUTURE_EPOCH` is used as the default value for certain `Validator`
    /// fields when a `Validator` is first created on the beacon chain
    uint64 internal constant FAR_FUTURE_EPOCH = type(uint64).max;
    bytes8 internal constant UINT64_MASK = 0xffffffffffffffff;
    /// @notice Contains a beacon state root and a merkle proof verifying its inclusion under a beacon block root
    struct StateRootProof {
        bytes32 beaconStateRoot;
        bytes proof;
    }
    /// @notice Contains a validator's fields and a merkle proof of their inclusion under a beacon state root
    struct ValidatorProof {
        bytes32[] validatorFields;
        bytes proof;
    }
    /// @notice Contains a beacon balance container root and a proof of this root under a beacon block root
    struct BalanceContainerProof {
        bytes32 balanceContainerRoot;
        bytes proof;
    }
    /// @notice Contains a validator balance root and a proof of its inclusion under a balance container root
    struct BalanceProof {
        bytes32 pubkeyHash;
        bytes32 balanceRoot;
        bytes proof;
    }
    /**
     *
     *              VALIDATOR FIELDS -> BEACON STATE ROOT -> BEACON BLOCK ROOT
     *
     */
    /// @notice Verify a merkle proof of the beacon state root against a beacon block root
    /// @param beaconBlockRoot merkle root of the beacon block
    /// @param proof the beacon state root and merkle proof of its inclusion under `beaconBlockRoot`
    function verifyStateRoot(bytes32 beaconBlockRoot, StateRootProof calldata proof) internal view {
        require(
            proof.proof.length == 32 * (BEACON_BLOCK_HEADER_TREE_HEIGHT),
            "BeaconChainProofs.verifyStateRoot: Proof has incorrect length"
        );
        /// This merkle proof verifies the `beaconStateRoot` under the `beaconBlockRoot`
        /// - beaconBlockRoot
        /// |                            HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
        /// -- beaconStateRoot
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: beaconBlockRoot,
                leaf: proof.beaconStateRoot,
                index: STATE_ROOT_INDEX
            }),
            "BeaconChainProofs.verifyStateRoot: Invalid state root merkle proof"
        );
    }
    /// @notice Verify a merkle proof of a validator container against a `beaconStateRoot`
    /// @dev This proof starts at a validator's container root, proves through the validator container root,
    /// and continues proving to the root of the `BeaconState`
    /// @dev See https://eth2book.info/capella/part3/containers/dependencies/#validator for info on `Validator` containers
    /// @dev See https://eth2book.info/capella/part3/containers/state/#beaconstate for info on `BeaconState` containers
    /// @param beaconStateRoot merkle root of the `BeaconState` container
    /// @param validatorFields an individual validator's fields. These are merklized to form a `validatorRoot`,
    /// which is used as the leaf to prove against `beaconStateRoot`
    /// @param validatorFieldsProof a merkle proof of inclusion of `validatorFields` under `beaconStateRoot`
    /// @param validatorIndex the validator's unique index
    function verifyValidatorFields(
        bytes32 beaconStateRoot,
        bytes32[] calldata validatorFields,
        bytes calldata validatorFieldsProof,
        uint40 validatorIndex
    ) internal view {
        require(
            validatorFields.length == VALIDATOR_FIELDS_LENGTH,
            "BeaconChainProofs.verifyValidatorFields: Validator fields has incorrect length"
        );
        /// Note: the reason we use `VALIDATOR_TREE_HEIGHT + 1` here is because the merklization process for
        /// this container includes hashing the root of the validator tree with the length of the validator list
        require(
            validatorFieldsProof.length == 32 * ((VALIDATOR_TREE_HEIGHT + 1) + BEACON_STATE_TREE_HEIGHT),
            "BeaconChainProofs.verifyValidatorFields: Proof has incorrect length"
        );
        // Merkleize `validatorFields` to get the leaf to prove
        bytes32 validatorRoot = Merkle.merkleizeSha256(validatorFields);
        /// This proof combines two proofs, so its index accounts for the relative position of leaves in two trees:
        /// - beaconStateRoot
        /// |                            HEIGHT: BEACON_STATE_TREE_HEIGHT
        /// -- validatorContainerRoot
        /// |                            HEIGHT: VALIDATOR_TREE_HEIGHT + 1
        /// ---- validatorRoot
        uint256 index = (VALIDATOR_CONTAINER_INDEX << (VALIDATOR_TREE_HEIGHT + 1)) | uint256(validatorIndex);
        require(
            Merkle.verifyInclusionSha256({
                proof: validatorFieldsProof,
                root: beaconStateRoot,
                leaf: validatorRoot,
                index: index
            }),
            "BeaconChainProofs.verifyValidatorFields: Invalid merkle proof"
        );
    }
    /**
     *
     *          VALIDATOR BALANCE -> BALANCE CONTAINER ROOT -> BEACON BLOCK ROOT
     *
     */
    /// @notice Verify a merkle proof of the beacon state's balances container against the beacon block root
    /// @dev This proof starts at the balance container root, proves through the beacon state root, and
    /// continues proving through the beacon block root. As a result, this proof will contain elements
    /// of a `StateRootProof` under the same block root, with the addition of proving the balances field
    /// within the beacon state.
    /// @dev This is used to make checkpoint proofs more efficient, as a checkpoint will verify multiple balances
    /// against the same balance container root.
    /// @param beaconBlockRoot merkle root of the beacon block
    /// @param proof a beacon balance container root and merkle proof of its inclusion under `beaconBlockRoot`
    function verifyBalanceContainer(bytes32 beaconBlockRoot, BalanceContainerProof calldata proof) internal view {
        require(
            proof.proof.length == 32 * (BEACON_BLOCK_HEADER_TREE_HEIGHT + BEACON_STATE_TREE_HEIGHT),
            "BeaconChainProofs.verifyBalanceContainer: Proof has incorrect length"
        );
        /// This proof combines two proofs, so its index accounts for the relative position of leaves in two trees:
        /// - beaconBlockRoot
        /// |                            HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
        /// -- beaconStateRoot
        /// |                            HEIGHT: BEACON_STATE_TREE_HEIGHT
        /// ---- balancesContainerRoot
        uint256 index = (STATE_ROOT_INDEX << (BEACON_STATE_TREE_HEIGHT)) | BALANCE_CONTAINER_INDEX;
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: beaconBlockRoot,
                leaf: proof.balanceContainerRoot,
                index: index
            }),
            "BeaconChainProofs.verifyBalanceContainer: invalid balance container proof"
        );
    }
    /// @notice Verify a merkle proof of a validator's balance against the beacon state's `balanceContainerRoot`
    /// @param balanceContainerRoot the merkle root of all validators' current balances
    /// @param validatorIndex the index of the validator whose balance we are proving
    /// @param proof the validator's associated balance root and a merkle proof of inclusion under `balanceContainerRoot`
    /// @return validatorBalanceGwei the validator's current balance (in gwei)
    function verifyValidatorBalance(
        bytes32 balanceContainerRoot,
        uint40 validatorIndex,
        BalanceProof calldata proof
    ) internal view returns (uint64 validatorBalanceGwei) {
        /// Note: the reason we use `BALANCE_TREE_HEIGHT + 1` here is because the merklization process for
        /// this container includes hashing the root of the balances tree with the length of the balances list
        require(
            proof.proof.length == 32 * (BALANCE_TREE_HEIGHT + 1),
            "BeaconChainProofs.verifyValidatorBalance: Proof has incorrect length"
        );
        /// When merkleized, beacon chain balances are combined into groups of 4 called a `balanceRoot`. The merkle
        /// proof here verifies that this validator's `balanceRoot` is included in the `balanceContainerRoot`
        /// - balanceContainerRoot
        /// |                            HEIGHT: BALANCE_TREE_HEIGHT
        /// -- balanceRoot
        uint256 balanceIndex = uint256(validatorIndex / 4);
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: balanceContainerRoot,
                leaf: proof.balanceRoot,
                index: balanceIndex
            }),
            "BeaconChainProofs.verifyValidatorBalance: Invalid merkle proof"
        );
        /// Extract the individual validator's balance from the `balanceRoot`
        return getBalanceAtIndex(proof.balanceRoot, validatorIndex);
    }
    /**
     * @notice Parses a balanceRoot to get the uint64 balance of a validator.
     * @dev During merkleization of the beacon state balance tree, four uint64 values are treated as a single
     * leaf in the merkle tree. We use validatorIndex % 4 to determine which of the four uint64 values to
     * extract from the balanceRoot.
     * @param balanceRoot is the combination of 4 validator balances being proven for
     * @param validatorIndex is the index of the validator being proven for
     * @return The validator's balance, in Gwei
     */
    function getBalanceAtIndex(bytes32 balanceRoot, uint40 validatorIndex) internal pure returns (uint64) {
        uint256 bitShiftAmount = (validatorIndex % 4) * 64;
        return Endian.fromLittleEndianUint64(bytes32((uint256(balanceRoot) << bitShiftAmount)));
    }
    /// @notice Indices for fields in the `Validator` container:
    /// 0: pubkey
    /// 1: withdrawal credentials
    /// 2: effective balance
    /// 3: slashed?
    /// 4: activation eligibility epoch
    /// 5: activation epoch
    /// 6: exit epoch
    /// 7: withdrawable epoch
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator)
    /// @dev Retrieves a validator's pubkey hash
    function getPubkeyHash(bytes32[] memory validatorFields) internal pure returns (bytes32) {
        return validatorFields[VALIDATOR_PUBKEY_INDEX];
    }
    /// @dev Retrieves a validator's withdrawal credentials
    function getWithdrawalCredentials(bytes32[] memory validatorFields) internal pure returns (bytes32) {
        return validatorFields[VALIDATOR_WITHDRAWAL_CREDENTIALS_INDEX];
    }
    /// @dev Retrieves a validator's effective balance (in gwei)
    function getEffectiveBalanceGwei(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_BALANCE_INDEX]);
    }
    /// @dev Retrieves a validator's activation epoch
    function getActivationEpoch(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_ACTIVATION_EPOCH_INDEX]);
    }
    /// @dev Retrieves true IFF a validator is marked slashed
    function isValidatorSlashed(bytes32[] memory validatorFields) internal pure returns (bool) {
        return validatorFields[VALIDATOR_SLASHED_INDEX] != 0;
    }
    /// @dev Retrieves a validator's exit epoch
    function getExitEpoch(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_EXIT_EPOCH_INDEX]);
    }
}
// SPDX-License-Identifier: MIT
// Adapted from OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library Merkle {
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * Note this is for a Merkle tree using the keccak/sha3 hash function
     */
    function verifyInclusionKeccak(
        bytes memory proof,
        bytes32 root,
        bytes32 leaf,
        uint256 index
    ) internal pure returns (bool) {
        return processInclusionProofKeccak(proof, leaf, index) == root;
    }
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     * @dev If the proof length is 0 then the leaf hash is returned.
     *
     * _Available since v4.4._
     *
     * Note this is for a Merkle tree using the keccak/sha3 hash function
     */
    function processInclusionProofKeccak(
        bytes memory proof,
        bytes32 leaf,
        uint256 index
    ) internal pure returns (bytes32) {
        require(proof.length % 32 == 0, "Merkle.processInclusionProofKeccak: proof length should be a multiple of 32");
        bytes32 computedHash = leaf;
        for (uint256 i = 32; i <= proof.length; i += 32) {
            if (index % 2 == 0) {
                // if ith bit of index is 0, then computedHash is a left sibling
                assembly {
                    mstore(0x00, computedHash)
                    mstore(0x20, mload(add(proof, i)))
                    computedHash := keccak256(0x00, 0x40)
                    index := div(index, 2)
                }
            } else {
                // if ith bit of index is 1, then computedHash is a right sibling
                assembly {
                    mstore(0x00, mload(add(proof, i)))
                    mstore(0x20, computedHash)
                    computedHash := keccak256(0x00, 0x40)
                    index := div(index, 2)
                }
            }
        }
        return computedHash;
    }
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * Note this is for a Merkle tree using the sha256 hash function
     */
    function verifyInclusionSha256(
        bytes memory proof,
        bytes32 root,
        bytes32 leaf,
        uint256 index
    ) internal view returns (bool) {
        return processInclusionProofSha256(proof, leaf, index) == root;
    }
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * _Available since v4.4._
     *
     * Note this is for a Merkle tree using the sha256 hash function
     */
    function processInclusionProofSha256(
        bytes memory proof,
        bytes32 leaf,
        uint256 index
    ) internal view returns (bytes32) {
        require(
            proof.length != 0 && proof.length % 32 == 0,
            "Merkle.processInclusionProofSha256: proof length should be a non-zero multiple of 32"
        );
        bytes32[1] memory computedHash = [leaf];
        for (uint256 i = 32; i <= proof.length; i += 32) {
            if (index % 2 == 0) {
                // if ith bit of index is 0, then computedHash is a left sibling
                assembly {
                    mstore(0x00, mload(computedHash))
                    mstore(0x20, mload(add(proof, i)))
                    if iszero(staticcall(sub(gas(), 2000), 2, 0x00, 0x40, computedHash, 0x20)) { revert(0, 0) }
                    index := div(index, 2)
                }
            } else {
                // if ith bit of index is 1, then computedHash is a right sibling
                assembly {
                    mstore(0x00, mload(add(proof, i)))
                    mstore(0x20, mload(computedHash))
                    if iszero(staticcall(sub(gas(), 2000), 2, 0x00, 0x40, computedHash, 0x20)) { revert(0, 0) }
                    index := div(index, 2)
                }
            }
        }
        return computedHash[0];
    }
    /**
     * @notice this function returns the merkle root of a tree created from a set of leaves using sha256 as its hash function
     *  @param leaves the leaves of the merkle tree
     *  @return The computed Merkle root of the tree.
     *  @dev A pre-condition to this function is that leaves.length is a power of two.  If not, the function will merkleize the inputs incorrectly.
     */
    function merkleizeSha256(bytes32[] memory leaves) internal pure returns (bytes32) {
        //there are half as many nodes in the layer above the leaves
        uint256 numNodesInLayer = leaves.length / 2;
        //create a layer to store the internal nodes
        bytes32[] memory layer = new bytes32[](numNodesInLayer);
        //fill the layer with the pairwise hashes of the leaves
        for (uint256 i = 0; i < numNodesInLayer; i++) {
            layer[i] = sha256(abi.encodePacked(leaves[2 * i], leaves[2 * i + 1]));
        }
        //the next layer above has half as many nodes
        numNodesInLayer /= 2;
        //while we haven't computed the root
        while (numNodesInLayer != 0) {
            //overwrite the first numNodesInLayer nodes in layer with the pairwise hashes of their children
            for (uint256 i = 0; i < numNodesInLayer; i++) {
                layer[i] = sha256(abi.encodePacked(layer[2 * i], layer[2 * i + 1]));
            }
            //the next layer above has half as many nodes
            numNodesInLayer /= 2;
        }
        //the first node in the layer is the root
        return layer[0];
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library Endian {
    /**
     * @notice Converts a little endian-formatted uint64 to a big endian-formatted uint64
     * @param lenum little endian-formatted uint64 input, provided as 'bytes32' type
     * @return n The big endian-formatted uint64
     * @dev Note that the input is formatted as a 'bytes32' type (i.e. 256 bits), but it is immediately truncated to a uint64 (i.e. 64 bits)
     * through a right-shift/shr operation.
     */
    function fromLittleEndianUint64(bytes32 lenum) internal pure returns (uint64 n) {
        // the number needs to be stored in little-endian encoding (ie in bytes 0-8)
        n = uint64(uint256(lenum >> 192));
        // forgefmt: disable-next-item
        return (n >> 56) | 
            ((0x00FF000000000000 & n) >> 40) | 
            ((0x0000FF0000000000 & n) >> 24) | 
            ((0x000000FF00000000 & n) >> 8)  | 
            ((0x00000000FF000000 & n) << 8)  | 
            ((0x0000000000FF0000 & n) << 24) | 
            ((0x000000000000FF00 & n) << 40) | 
            ((0x00000000000000FF & n) << 56);
    }
}