// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {Ownable} from '../dependencies/openzeppelin/contracts/Ownable.sol';
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IWETH} from './interfaces/IWETH.sol';
import {IPool} from '../interfaces/IPool.sol';
import {IAToken} from '../interfaces/IAToken.sol';
import {ReserveConfiguration} from '../protocol/libraries/configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../protocol/libraries/configuration/UserConfiguration.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
import {IWrappedTokenGatewayV3} from './interfaces/IWrappedTokenGatewayV3.sol';
/**
 * @dev This contract is an upgrade of the WrappedTokenGatewayV3 contract, with immutable pool address.
 * This contract keeps the same interface of the deprecated WrappedTokenGatewayV3 contract.
 */
contract WrappedTokenGatewayV3 is IWrappedTokenGatewayV3, Ownable {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using GPv2SafeERC20 for IERC20;
  IWETH internal immutable WETH;
  IPool internal immutable POOL;
  /**
   * @dev Sets the WETH address and the PoolAddressesProvider address. Infinite approves pool.
   * @param weth Address of the Wrapped Ether contract
   * @param owner Address of the owner of this contract
   **/
  constructor(address weth, address owner, IPool pool) {
    WETH = IWETH(weth);
    POOL = pool;
    transferOwnership(owner);
    IWETH(weth).approve(address(pool), type(uint256).max);
  }
  /**
   * @dev deposits WETH into the reserve, using native ETH. A corresponding amount of the overlying asset (aTokens)
   * is minted.
   * @param onBehalfOf address of the user who will receive the aTokens representing the deposit
   * @param referralCode integrators are assigned a referral code and can potentially receive rewards.
   **/
  function depositETH(address, address onBehalfOf, uint16 referralCode) external payable override {
    WETH.deposit{value: msg.value}();
    POOL.deposit(address(WETH), msg.value, onBehalfOf, referralCode);
  }
  /**
   * @dev withdraws the WETH _reserves of msg.sender.
   * @param amount amount of aWETH to withdraw and receive native ETH
   * @param to address of the user who will receive native ETH
   */
  function withdrawETH(address, uint256 amount, address to) external override {
    IAToken aWETH = IAToken(POOL.getReserveData(address(WETH)).aTokenAddress);
    uint256 userBalance = aWETH.balanceOf(msg.sender);
    uint256 amountToWithdraw = amount;
    // if amount is equal to uint(-1), the user wants to redeem everything
    if (amount == type(uint256).max) {
      amountToWithdraw = userBalance;
    }
    aWETH.transferFrom(msg.sender, address(this), amountToWithdraw);
    POOL.withdraw(address(WETH), amountToWithdraw, address(this));
    WETH.withdraw(amountToWithdraw);
    _safeTransferETH(to, amountToWithdraw);
  }
  /**
   * @dev repays a borrow on the WETH reserve, for the specified amount (or for the whole amount, if uint256(-1) is specified).
   * @param amount the amount to repay, or uint256(-1) if the user wants to repay everything
   * @param onBehalfOf the address for which msg.sender is repaying
   */
  function repayETH(address, uint256 amount, address onBehalfOf) external payable override {
    uint256 paybackAmount = IERC20((POOL.getReserveData(address(WETH))).variableDebtTokenAddress)
      .balanceOf(onBehalfOf);
    if (amount < paybackAmount) {
      paybackAmount = amount;
    }
    require(msg.value >= paybackAmount, 'msg.value is less than repayment amount');
    WETH.deposit{value: paybackAmount}();
    POOL.repay(
      address(WETH),
      paybackAmount,
      uint256(DataTypes.InterestRateMode.VARIABLE),
      onBehalfOf
    );
    // refund remaining dust eth
    if (msg.value > paybackAmount) _safeTransferETH(msg.sender, msg.value - paybackAmount);
  }
  /**
   * @dev borrow WETH, unwraps to ETH and send both the ETH and DebtTokens to msg.sender, via `approveDelegation` and onBehalf argument in `Pool.borrow`.
   * @param amount the amount of ETH to borrow
   * @param referralCode integrators are assigned a referral code and can potentially receive rewards
   */
  function borrowETH(address, uint256 amount, uint16 referralCode) external override {
    POOL.borrow(
      address(WETH),
      amount,
      uint256(DataTypes.InterestRateMode.VARIABLE),
      referralCode,
      msg.sender
    );
    WETH.withdraw(amount);
    _safeTransferETH(msg.sender, amount);
  }
  /**
   * @dev withdraws the WETH _reserves of msg.sender.
   * @param amount amount of aWETH to withdraw and receive native ETH
   * @param to address of the user who will receive native ETH
   * @param deadline validity deadline of permit and so depositWithPermit signature
   * @param permitV V parameter of ERC712 permit sig
   * @param permitR R parameter of ERC712 permit sig
   * @param permitS S parameter of ERC712 permit sig
   */
  function withdrawETHWithPermit(
    address,
    uint256 amount,
    address to,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external override {
    IAToken aWETH = IAToken(POOL.getReserveData(address(WETH)).aTokenAddress);
    uint256 userBalance = aWETH.balanceOf(msg.sender);
    uint256 amountToWithdraw = amount;
    // if amount is equal to type(uint256).max, the user wants to redeem everything
    if (amount == type(uint256).max) {
      amountToWithdraw = userBalance;
    }
    // permit `amount` rather than `amountToWithdraw` to make it easier for front-ends and integrators
    aWETH.permit(msg.sender, address(this), amount, deadline, permitV, permitR, permitS);
    aWETH.transferFrom(msg.sender, address(this), amountToWithdraw);
    POOL.withdraw(address(WETH), amountToWithdraw, address(this));
    WETH.withdraw(amountToWithdraw);
    _safeTransferETH(to, amountToWithdraw);
  }
  /**
   * @dev transfer ETH to an address, revert if it fails.
   * @param to recipient of the transfer
   * @param value the amount to send
   */
  function _safeTransferETH(address to, uint256 value) internal {
    (bool success, ) = to.call{value: value}(new bytes(0));
    require(success, 'ETH_TRANSFER_FAILED');
  }
  /**
   * @dev transfer ERC20 from the utility contract, for ERC20 recovery in case of stuck tokens due
   * direct transfers to the contract address.
   * @param token token to transfer
   * @param to recipient of the transfer
   * @param amount amount to send
   */
  function emergencyTokenTransfer(address token, address to, uint256 amount) external onlyOwner {
    IERC20(token).safeTransfer(to, amount);
  }
  /**
   * @dev transfer native Ether from the utility contract, for native Ether recovery in case of stuck Ether
   * due to selfdestructs or ether transfers to the pre-computed contract address before deployment.
   * @param to recipient of the transfer
   * @param amount amount to send
   */
  function emergencyEtherTransfer(address to, uint256 amount) external onlyOwner {
    _safeTransferETH(to, amount);
  }
  /**
   * @dev Get WETH address used by WrappedTokenGatewayV3
   */
  function getWETHAddress() external view returns (address) {
    return address(WETH);
  }
  /**
   * @dev Only WETH contract is allowed to transfer ETH here. Prevent other addresses to send Ether to this contract.
   */
  receive() external payable {
    require(msg.sender == address(WETH), 'Receive not allowed');
  }
  /**
   * @dev Revert fallback calls
   */
  fallback() external payable {
    revert('Fallback not allowed');
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
import './Context.sol';
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
  address private _owner;
  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() {
    address msgSender = _msgSender();
    _owner = msgSender;
    emit OwnershipTransferred(address(0), msgSender);
  }
  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view returns (address) {
    return _owner;
  }
  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(_owner == _msgSender(), 'Ownable: caller is not the owner');
    _;
  }
  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    emit OwnershipTransferred(_owner, address(0));
    _owner = address(0);
  }
  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), 'Ownable: new owner is the zero address');
    emit OwnershipTransferred(_owner, newOwner);
    _owner = newOwner;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity ^0.8.10;
import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';
/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    bytes4 selector_ = token.transfer.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }
  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    bytes4 selector_ = token.transferFrom.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }
  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\\x08\\xc3\\x79\\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }
      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }
        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())
        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IWETH {
  function deposit() external payable;
  function withdraw(uint256) external;
  function approve(address guy, uint256 wad) external returns (bool);
  function transferFrom(address src, address dst, uint256 wad) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 2 for Variable, 1 is deprecated (changed on v3.2.0)
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan,
   *        1 for Stable (Deprecated on v3.2.0), 2 for Variable
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );
  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate @note deprecated on v3.2.0
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);
  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);
  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the VariableDebtToken
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 variable debt tokens
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;
  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);
  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);
  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode DEPRECATED in v3.2.0
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);
  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Deprecated on v3.2.0
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using 2 on `modes`
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );
  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;
  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev Does not reset eMode flags, which must be considered when reusing the same reserve id for a different reserve.
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;
  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;
  /**
   * @notice Accumulates interest to all indexes of the reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncIndexesState(address asset) external;
  /**
   * @notice Updates interest rates on the reserve data
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncRatesState(address asset) external;
  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;
  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);
  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);
  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);
  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveDataLegacy memory);
  /**
   * @notice Returns the state and configuration of the reserve, including extra data included with Aave v3.1
   * @dev DEPRECATED use independent getters instead (getReserveData, getLiquidationGracePeriod)
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve with virtual accounting
   */
  function getReserveDataExtended(
    address asset
  ) external view returns (DataTypes.ReserveData memory);
  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint128);
  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;
  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);
  /**
   * @notice Returns the number of initialized reserves
   * @dev It includes dropped reserves
   * @return The count
   */
  function getReservesCount() external view returns (uint256);
  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);
  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;
  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;
  /**
   * @notice Configures a new or alters an existing collateral configuration of an eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(
    uint8 id,
    DataTypes.EModeCategoryBaseConfiguration memory config
  ) external;
  /**
   * @notice Replaces the current eMode collateralBitmap.
   * @param id The id of the category
   * @param collateralBitmap The collateralBitmap of the category
   */
  function configureEModeCategoryCollateralBitmap(uint8 id, uint128 collateralBitmap) external;
  /**
   * @notice Replaces the current eMode borrowableBitmap.
   * @param id The id of the category
   * @param borrowableBitmap The borrowableBitmap of the category
   */
  function configureEModeCategoryBorrowableBitmap(uint8 id, uint128 borrowableBitmap) external;
  /**
   * @notice Returns the data of an eMode category
   * @dev DEPRECATED use independent getters instead
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(
    uint8 id
  ) external view returns (DataTypes.EModeCategoryLegacy memory);
  /**
   * @notice Returns the label of an eMode category
   * @param id The id of the category
   * @return The label of the category
   */
  function getEModeCategoryLabel(uint8 id) external view returns (string memory);
  /**
   * @notice Returns the collateral config of an eMode category
   * @param id The id of the category
   * @return The ltv,lt,lb of the category
   */
  function getEModeCategoryCollateralConfig(
    uint8 id
  ) external view returns (DataTypes.CollateralConfig memory);
  /**
   * @notice Returns the collateralBitmap of an eMode category
   * @param id The id of the category
   * @return The collateralBitmap of the category
   */
  function getEModeCategoryCollateralBitmap(uint8 id) external view returns (uint128);
  /**
   * @notice Returns the borrowableBitmap of an eMode category
   * @param id The id of the category
   * @return The borrowableBitmap of the category
   */
  function getEModeCategoryBorrowableBitmap(uint8 id) external view returns (uint128);
  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;
  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);
  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;
  /**
   * @notice Sets the liquidation grace period of the given asset
   * @dev To enable a liquidation grace period, a timestamp in the future should be set,
   *      To disable a liquidation grace period, any timestamp in the past works, like 0
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   **/
  function setLiquidationGracePeriod(address asset, uint40 until) external;
  /**
   * @notice Returns the liquidation grace period of the given asset
   * @param asset The address of the underlying asset
   * @return Timestamp when the liquidation grace period will end
   **/
  function getLiquidationGracePeriod(address asset) external returns (uint40);
  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);
  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
  /**
   * @notice Gets the address of the external FlashLoanLogic
   */
  function getFlashLoanLogic() external view returns (address);
  /**
   * @notice Gets the address of the external BorrowLogic
   */
  function getBorrowLogic() external view returns (address);
  /**
   * @notice Gets the address of the external BridgeLogic
   */
  function getBridgeLogic() external view returns (address);
  /**
   * @notice Gets the address of the external EModeLogic
   */
  function getEModeLogic() external view returns (address);
  /**
   * @notice Gets the address of the external LiquidationLogic
   */
  function getLiquidationLogic() external view returns (address);
  /**
   * @notice Gets the address of the external PoolLogic
   */
  function getPoolLogic() external view returns (address);
  /**
   * @notice Gets the address of the external SupplyLogic
   */
  function getSupplyLogic() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);
  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;
  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;
  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;
  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;
  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;
  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);
  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);
  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 internal constant LTV_MASK =                       0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
  uint256 internal constant LIQUIDATION_THRESHOLD_MASK =     0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_BONUS_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
  uint256 internal constant DECIMALS_MASK =                  0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant ACTIVE_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FROZEN_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWING_MASK =                 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
  // @notice there is an unoccupied hole of 1 bit at position 59 from pre 3.2 stableBorrowRateEnabled
  uint256 internal constant PAUSED_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWABLE_IN_ISOLATION_MASK =   0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SILOED_BORROWING_MASK =          0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FLASHLOAN_ENABLED_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant RESERVE_FACTOR_MASK =            0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROW_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SUPPLY_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK =  0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  // @notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_MASK =         0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant DEBT_CEILING_MASK =              0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant VIRTUAL_ACC_ACTIVE_MASK =        0xEFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
  uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
  uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
  uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
  uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
  uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
  uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
  uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;
  uint256 internal constant VIRTUAL_ACC_START_BIT_POSITION = 252;
  uint256 internal constant MAX_VALID_LTV = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 internal constant MAX_VALID_DECIMALS = 255;
  uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
  uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
  uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
  uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
  uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
  uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;
  uint256 public constant DEBT_CEILING_DECIMALS = 2;
  uint16 public constant MAX_RESERVES_COUNT = 128;
  /**
   * @notice Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv The new ltv
   */
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);
    self.data = (self.data & LTV_MASK) | ltv;
  }
  /**
   * @notice Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   */
  function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
    return self.data & ~LTV_MASK;
  }
  /**
   * @notice Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   */
  function setLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 threshold
  ) internal pure {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);
    self.data =
      (self.data & LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }
  /**
   * @notice Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   */
  function getLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }
  /**
   * @notice Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   */
  function setLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 bonus
  ) internal pure {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);
    self.data =
      (self.data & LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }
  /**
   * @notice Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   */
  function getLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }
  /**
   * @notice Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   */
  function setDecimals(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 decimals
  ) internal pure {
    require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);
    self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }
  /**
   * @notice Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   */
  function getDecimals(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }
  /**
   * @notice Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }
  /**
   * @notice Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   */
  function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~ACTIVE_MASK) != 0;
  }
  /**
   * @notice Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   */
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }
  /**
   * @notice Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   */
  function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~FROZEN_MASK) != 0;
  }
  /**
   * @notice Sets the paused state of the reserve
   * @param self The reserve configuration
   * @param paused The paused state
   */
  function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
    self.data =
      (self.data & PAUSED_MASK) |
      (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the paused state of the reserve
   * @param self The reserve configuration
   * @return The paused state
   */
  function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~PAUSED_MASK) != 0;
  }
  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
   * amount will be accumulated in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @param borrowable True if the asset is borrowable
   */
  function setBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self,
    bool borrowable
  ) internal pure {
    self.data =
      (self.data & BORROWABLE_IN_ISOLATION_MASK) |
      (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrowable in isolation flag for the reserve.
   * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
   * isolated collateral is accounted for in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @return The borrowable in isolation flag
   */
  function getBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0;
  }
  /**
   * @notice Sets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @param siloed True if the asset is siloed
   */
  function setSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self,
    bool siloed
  ) internal pure {
    self.data =
      (self.data & SILOED_BORROWING_MASK) |
      (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
  }
  /**
   * @notice Gets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @return The siloed borrowing flag
   */
  function getSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~SILOED_BORROWING_MASK) != 0;
  }
  /**
   * @notice Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   */
  function setBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   */
  function getBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWING_MASK) != 0;
  }
  /**
   * @notice Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   */
  function setReserveFactor(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 reserveFactor
  ) internal pure {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);
    self.data =
      (self.data & RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }
  /**
   * @notice Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   */
  function getReserveFactor(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }
  /**
   * @notice Sets the borrow cap of the reserve
   * @param self The reserve configuration
   * @param borrowCap The borrow cap
   */
  function setBorrowCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 borrowCap
  ) internal pure {
    require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);
    self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrow cap of the reserve
   * @param self The reserve configuration
   * @return The borrow cap
   */
  function getBorrowCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the supply cap of the reserve
   * @param self The reserve configuration
   * @param supplyCap The supply cap
   */
  function setSupplyCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 supplyCap
  ) internal pure {
    require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);
    self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
  }
  /**
   * @notice Gets the supply cap of the reserve
   * @param self The reserve configuration
   * @return The supply cap
   */
  function getSupplyCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the debt ceiling in isolation mode for the asset
   * @param self The reserve configuration
   * @param ceiling The maximum debt ceiling for the asset
   */
  function setDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 ceiling
  ) internal pure {
    require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);
    self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
  }
  /**
   * @notice Gets the debt ceiling for the asset if the asset is in isolation mode
   * @param self The reserve configuration
   * @return The debt ceiling (0 = isolation mode disabled)
   */
  function getDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
  }
  /**
   * @notice Sets the liquidation protocol fee of the reserve
   * @param self The reserve configuration
   * @param liquidationProtocolFee The liquidation protocol fee
   */
  function setLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 liquidationProtocolFee
  ) internal pure {
    require(
      liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
      Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
    );
    self.data =
      (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) |
      (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
  }
  /**
   * @dev Gets the liquidation protocol fee
   * @param self The reserve configuration
   * @return The liquidation protocol fee
   */
  function getLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return
      (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
  }
  /**
   * @notice Sets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @param unbackedMintCap The unbacked mint cap
   */
  function setUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 unbackedMintCap
  ) internal pure {
    require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);
    self.data =
      (self.data & UNBACKED_MINT_CAP_MASK) |
      (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
  }
  /**
   * @dev Gets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @return The unbacked mint cap
   */
  function getUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @param flashLoanEnabled True if the asset is flashloanable, false otherwise
   */
  function setFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool flashLoanEnabled
  ) internal pure {
    self.data =
      (self.data & FLASHLOAN_ENABLED_MASK) |
      (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @return The flashloanable flag
   */
  function getFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0;
  }
  /**
   * @notice Sets the virtual account active/not state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self,
    bool active
  ) internal pure {
    self.data =
      (self.data & VIRTUAL_ACC_ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << VIRTUAL_ACC_START_BIT_POSITION);
  }
  /**
   * @notice Gets the virtual account active/not state of the reserve
   * @dev The state should be true for all normal assets and should be false
   *  only in special cases (ex. GHO) where an asset is minted instead of supplied.
   * @param self The reserve configuration
   * @return The active state
   */
  function getIsVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~VIRTUAL_ACC_ACTIVE_MASK) != 0;
  }
  /**
   * @notice Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flag representing active
   * @return The state flag representing frozen
   * @return The state flag representing borrowing enabled
   * @return The state flag representing paused
   */
  function getFlags(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool, bool, bool, bool) {
    uint256 dataLocal = self.data;
    return (
      (dataLocal & ~ACTIVE_MASK) != 0,
      (dataLocal & ~FROZEN_MASK) != 0,
      (dataLocal & ~BORROWING_MASK) != 0,
      (dataLocal & ~PAUSED_MASK) != 0
    );
  }
  /**
   * @notice Gets the configuration parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing ltv
   * @return The state param representing liquidation threshold
   * @return The state param representing liquidation bonus
   * @return The state param representing reserve decimals
   * @return The state param representing reserve factor
   */
  function getParams(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256, uint256, uint256, uint256) {
    uint256 dataLocal = self.data;
    return (
      dataLocal & ~LTV_MASK,
      (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }
  /**
   * @notice Gets the caps parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing borrow cap
   * @return The state param representing supply cap.
   */
  function getCaps(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256) {
    uint256 dataLocal = self.data;
    return (
      (dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
      (dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
    );
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';
/**
 * @title UserConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the user configuration
 */
library UserConfiguration {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  uint256 internal constant BORROWING_MASK =
    0x5555555555555555555555555555555555555555555555555555555555555555;
  uint256 internal constant COLLATERAL_MASK =
    0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;
  /**
   * @notice Sets if the user is borrowing the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param borrowing True if the user is borrowing the reserve, false otherwise
   */
  function setBorrowing(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool borrowing
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << (reserveIndex << 1);
      if (borrowing) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }
  /**
   * @notice Sets if the user is using as collateral the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param usingAsCollateral True if the user is using the reserve as collateral, false otherwise
   */
  function setUsingAsCollateral(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool usingAsCollateral
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << ((reserveIndex << 1) + 1);
      if (usingAsCollateral) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }
  /**
   * @notice Returns if a user has been using the reserve for borrowing or as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
   */
  function isUsingAsCollateralOrBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 3 != 0;
    }
  }
  /**
   * @notice Validate a user has been using the reserve for borrowing
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing, false otherwise
   */
  function isBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 1 != 0;
    }
  }
  /**
   * @notice Validate a user has been using the reserve as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve as collateral, false otherwise
   */
  function isUsingAsCollateral(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> ((reserveIndex << 1) + 1)) & 1 != 0;
    }
  }
  /**
   * @notice Checks if a user has been supplying only one reserve as collateral
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isUsingAsCollateralOne(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    uint256 collateralData = self.data & COLLATERAL_MASK;
    return collateralData != 0 && (collateralData & (collateralData - 1) == 0);
  }
  /**
   * @notice Checks if a user has been supplying any reserve as collateral
   * @param self The configuration object
   * @return True if the user has been supplying as collateral any reserve, false otherwise
   */
  function isUsingAsCollateralAny(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    return self.data & COLLATERAL_MASK != 0;
  }
  /**
   * @notice Checks if a user has been borrowing only one asset
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isBorrowingOne(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    uint256 borrowingData = self.data & BORROWING_MASK;
    return borrowingData != 0 && (borrowingData & (borrowingData - 1) == 0);
  }
  /**
   * @notice Checks if a user has been borrowing from any reserve
   * @param self The configuration object
   * @return True if the user has been borrowing any reserve, false otherwise
   */
  function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data & BORROWING_MASK != 0;
  }
  /**
   * @notice Checks if a user has not been using any reserve for borrowing or supply
   * @param self The configuration object
   * @return True if the user has not been borrowing or supplying any reserve, false otherwise
   */
  function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data == 0;
  }
  /**
   * @notice Returns the Isolation Mode state of the user
   * @param self The configuration object
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @return True if the user is in isolation mode, false otherwise
   * @return The address of the only asset used as collateral
   * @return The debt ceiling of the reserve
   */
  function getIsolationModeState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address, uint256) {
    if (isUsingAsCollateralOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, COLLATERAL_MASK);
      address assetAddress = reservesList[assetId];
      uint256 ceiling = reservesData[assetAddress].configuration.getDebtCeiling();
      if (ceiling != 0) {
        return (true, assetAddress, ceiling);
      }
    }
    return (false, address(0), 0);
  }
  /**
   * @notice Returns the siloed borrowing state for the user
   * @param self The configuration object
   * @param reservesData The data of all the reserves
   * @param reservesList The reserve list
   * @return True if the user has borrowed a siloed asset, false otherwise
   * @return The address of the only borrowed asset
   */
  function getSiloedBorrowingState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address) {
    if (isBorrowingOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, BORROWING_MASK);
      address assetAddress = reservesList[assetId];
      if (reservesData[assetAddress].configuration.getSiloedBorrowing()) {
        return (true, assetAddress);
      }
    }
    return (false, address(0));
  }
  /**
   * @notice Returns the address of the first asset flagged in the bitmap given the corresponding bitmask
   * @param self The configuration object
   * @return The index of the first asset flagged in the bitmap once the corresponding mask is applied
   */
  function _getFirstAssetIdByMask(
    DataTypes.UserConfigurationMap memory self,
    uint256 mask
  ) internal pure returns (uint256) {
    unchecked {
      uint256 bitmapData = self.data & mask;
      uint256 firstAssetPosition = bitmapData & ~(bitmapData - 1);
      uint256 id;
      while ((firstAssetPosition >>= 2) != 0) {
        id += 1;
      }
      return id;
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 __deprecatedStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }
  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused
    uint256 data;
  }
  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }
  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }
  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }
  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }
  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }
  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }
  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }
  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }
  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }
  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }
  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }
  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }
  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }
  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }
  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }
  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }
  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }
  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
interface IWrappedTokenGatewayV3 {
  function depositETH(address pool, address onBehalfOf, uint16 referralCode) external payable;
  function withdrawETH(address pool, uint256 amount, address onBehalfOf) external;
  function repayETH(address pool, uint256 amount, address onBehalfOf) external payable;
  function borrowETH(address pool, uint256 amount, uint16 referralCode) external;
  function withdrawETHWithPermit(
    address pool,
    uint256 amount,
    address to,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }
  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );
  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );
  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);
  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;
  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);
  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;
  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);
  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;
  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);
  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);
  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;
  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);
  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;
  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);
  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;
  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);
  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;
  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);
  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);
  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);
  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
    // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
    // for accounts without code, i.e. `keccak256('')`
    bytes32 codehash;
    bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      codehash := extcodehash(account)
    }
    return (codehash != accountHash && codehash != 0x0);
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');
    // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './Proxy.sol';
import '../contracts/Address.sol';
/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);
  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT =
    0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal view override returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      impl := sload(slot)
    }
  }
  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }
  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(
      Address.isContract(newImplementation),
      'Cannot set a proxy implementation to a non-contract address'
    );
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      sstore(slot, newImplementation)
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './BaseUpgradeabilityProxy.sol';
/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  function initialize(address _logic, bytes memory _data) public payable {
    require(_implementation() == address(0));
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if (_data.length > 0) {
      (bool success, ) = _logic.delegatecall(_data);
      require(success);
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Will run if no other function in the contract matches the call data.
   * Implemented entirely in `_fallback`.
   */
  fallback() external payable {
    _fallback();
  }
  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view virtual returns (address);
  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    //solium-disable-next-line
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())
      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())
      switch result
      // delegatecall returns 0 on error.
      case 0 {
        revert(0, returndatasize())
      }
      default {
        return(0, returndatasize())
      }
    }
  }
  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {}
  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {BaseUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/BaseUpgradeabilityProxy.sol';
/**
 * @title BaseImmutableAdminUpgradeabilityProxy
 * @author Aave, inspired by the OpenZeppelin upgradeability proxy pattern
 * @notice This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * @dev The admin role is stored in an immutable, which helps saving transactions costs
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseImmutableAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  address internal immutable _admin;
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) {
    _admin = admin;
  }
  modifier ifAdmin() {
    if (msg.sender == _admin) {
      _;
    } else {
      _fallback();
    }
  }
  /**
   * @notice Return the admin address
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin;
  }
  /**
   * @notice Return the implementation address
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }
  /**
   * @notice Upgrade the backing implementation of the proxy.
   * @dev Only the admin can call this function.
   * @param newImplementation The address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }
  /**
   * @notice Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * @dev This is useful to initialize the proxied contract.
   * @param newImplementation The address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data)
    external
    payable
    ifAdmin
  {
    _upgradeTo(newImplementation);
    (bool success, ) = newImplementation.delegatecall(data);
    require(success);
  }
  /**
   * @notice Only fall back when the sender is not the admin.
   */
  function _willFallback() internal virtual override {
    require(msg.sender != _admin, 'Cannot call fallback function from the proxy admin');
    super._willFallback();
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {InitializableUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/InitializableUpgradeabilityProxy.sol';
import {Proxy} from '../../../dependencies/openzeppelin/upgradeability/Proxy.sol';
import {BaseImmutableAdminUpgradeabilityProxy} from './BaseImmutableAdminUpgradeabilityProxy.sol';
/**
 * @title InitializableAdminUpgradeabilityProxy
 * @author Aave
 * @dev Extends BaseAdminUpgradeabilityProxy with an initializer function
 */
contract InitializableImmutableAdminUpgradeabilityProxy is
  BaseImmutableAdminUpgradeabilityProxy,
  InitializableUpgradeabilityProxy
{
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) BaseImmutableAdminUpgradeabilityProxy(admin) {
    // Intentionally left blank
  }
  /// @inheritdoc BaseImmutableAdminUpgradeabilityProxy
  function _willFallback() internal override(BaseImmutableAdminUpgradeabilityProxy, Proxy) {
    BaseImmutableAdminUpgradeabilityProxy._willFallback();
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
    // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
    // for accounts without code, i.e. `keccak256('')`
    bytes32 codehash;
    bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      codehash := extcodehash(account)
    }
    return (codehash != accountHash && codehash != 0x0);
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');
    // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './Proxy.sol';
import '../contracts/Address.sol';
/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);
  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT =
    0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal view override returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      impl := sload(slot)
    }
  }
  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }
  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(
      Address.isContract(newImplementation),
      'Cannot set a proxy implementation to a non-contract address'
    );
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      sstore(slot, newImplementation)
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './BaseUpgradeabilityProxy.sol';
/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  function initialize(address _logic, bytes memory _data) public payable {
    require(_implementation() == address(0));
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if (_data.length > 0) {
      (bool success, ) = _logic.delegatecall(_data);
      require(success);
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Will run if no other function in the contract matches the call data.
   * Implemented entirely in `_fallback`.
   */
  fallback() external payable {
    _fallback();
  }
  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view virtual returns (address);
  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    //solium-disable-next-line
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())
      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())
      switch result
      // delegatecall returns 0 on error.
      case 0 {
        revert(0, returndatasize())
      }
      default {
        return(0, returndatasize())
      }
    }
  }
  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {}
  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {BaseUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/BaseUpgradeabilityProxy.sol';
/**
 * @title BaseImmutableAdminUpgradeabilityProxy
 * @author Aave, inspired by the OpenZeppelin upgradeability proxy pattern
 * @notice This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * @dev The admin role is stored in an immutable, which helps saving transactions costs
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseImmutableAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  address internal immutable _admin;
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) {
    _admin = admin;
  }
  modifier ifAdmin() {
    if (msg.sender == _admin) {
      _;
    } else {
      _fallback();
    }
  }
  /**
   * @notice Return the admin address
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin;
  }
  /**
   * @notice Return the implementation address
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }
  /**
   * @notice Upgrade the backing implementation of the proxy.
   * @dev Only the admin can call this function.
   * @param newImplementation The address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }
  /**
   * @notice Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * @dev This is useful to initialize the proxied contract.
   * @param newImplementation The address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data)
    external
    payable
    ifAdmin
  {
    _upgradeTo(newImplementation);
    (bool success, ) = newImplementation.delegatecall(data);
    require(success);
  }
  /**
   * @notice Only fall back when the sender is not the admin.
   */
  function _willFallback() internal virtual override {
    require(msg.sender != _admin, 'Cannot call fallback function from the proxy admin');
    super._willFallback();
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {InitializableUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/InitializableUpgradeabilityProxy.sol';
import {Proxy} from '../../../dependencies/openzeppelin/upgradeability/Proxy.sol';
import {BaseImmutableAdminUpgradeabilityProxy} from './BaseImmutableAdminUpgradeabilityProxy.sol';
/**
 * @title InitializableAdminUpgradeabilityProxy
 * @author Aave
 * @dev Extends BaseAdminUpgradeabilityProxy with an initializer function
 */
contract InitializableImmutableAdminUpgradeabilityProxy is
  BaseImmutableAdminUpgradeabilityProxy,
  InitializableUpgradeabilityProxy
{
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) BaseImmutableAdminUpgradeabilityProxy(admin) {
    // Intentionally left blank
  }
  /// @inheritdoc BaseImmutableAdminUpgradeabilityProxy
  function _willFallback() internal override(BaseImmutableAdminUpgradeabilityProxy, Proxy) {
    BaseImmutableAdminUpgradeabilityProxy._willFallback();
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {Pool} from '../protocol/pool/Pool.sol';
import {IPoolAddressesProvider} from '../interfaces/IPoolAddressesProvider.sol';
import {Errors} from '../protocol/libraries/helpers/Errors.sol';
contract PoolInstance is Pool {
  uint256 public constant POOL_REVISION = 6;
  constructor(IPoolAddressesProvider provider) Pool(provider) {}
  /**
   * @notice Initializes the Pool.
   * @dev Function is invoked by the proxy contract when the Pool contract is added to the
   * PoolAddressesProvider of the market.
   * @dev Caching the address of the PoolAddressesProvider in order to reduce gas consumption on subsequent operations
   * @param provider The address of the PoolAddressesProvider
   */
  function initialize(IPoolAddressesProvider provider) external virtual override initializer {
    require(provider == ADDRESSES_PROVIDER, Errors.INVALID_ADDRESSES_PROVIDER);
  }
  function getRevision() internal pure virtual override returns (uint256) {
    return POOL_REVISION;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {VersionedInitializable} from '../../misc/aave-upgradeability/VersionedInitializable.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {ReserveConfiguration} from '../libraries/configuration/ReserveConfiguration.sol';
import {PoolLogic} from '../libraries/logic/PoolLogic.sol';
import {ReserveLogic} from '../libraries/logic/ReserveLogic.sol';
import {EModeLogic} from '../libraries/logic/EModeLogic.sol';
import {SupplyLogic} from '../libraries/logic/SupplyLogic.sol';
import {FlashLoanLogic} from '../libraries/logic/FlashLoanLogic.sol';
import {BorrowLogic} from '../libraries/logic/BorrowLogic.sol';
import {LiquidationLogic} from '../libraries/logic/LiquidationLogic.sol';
import {DataTypes} from '../libraries/types/DataTypes.sol';
import {BridgeLogic} from '../libraries/logic/BridgeLogic.sol';
import {IERC20WithPermit} from '../../interfaces/IERC20WithPermit.sol';
import {IPoolAddressesProvider} from '../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../interfaces/IPool.sol';
import {IACLManager} from '../../interfaces/IACLManager.sol';
import {PoolStorage} from './PoolStorage.sol';
/**
 * @title Pool contract
 * @author Aave
 * @notice Main point of interaction with an Aave protocol's market
 * - Users can:
 *   # Supply
 *   # Withdraw
 *   # Borrow
 *   # Repay
 *   # Enable/disable their supplied assets as collateral
 *   # Liquidate positions
 *   # Execute Flash Loans
 * @dev To be covered by a proxy contract, owned by the PoolAddressesProvider of the specific market
 * @dev All admin functions are callable by the PoolConfigurator contract defined also in the
 *   PoolAddressesProvider
 */
abstract contract Pool is VersionedInitializable, PoolStorage, IPool {
  using ReserveLogic for DataTypes.ReserveData;
  IPoolAddressesProvider public immutable ADDRESSES_PROVIDER;
  /**
   * @dev Only pool configurator can call functions marked by this modifier.
   */
  modifier onlyPoolConfigurator() {
    _onlyPoolConfigurator();
    _;
  }
  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    _onlyPoolAdmin();
    _;
  }
  /**
   * @dev Only bridge can call functions marked by this modifier.
   */
  modifier onlyBridge() {
    _onlyBridge();
    _;
  }
  function _onlyPoolConfigurator() internal view virtual {
    require(
      ADDRESSES_PROVIDER.getPoolConfigurator() == msg.sender,
      Errors.CALLER_NOT_POOL_CONFIGURATOR
    );
  }
  function _onlyPoolAdmin() internal view virtual {
    require(
      IACLManager(ADDRESSES_PROVIDER.getACLManager()).isPoolAdmin(msg.sender),
      Errors.CALLER_NOT_POOL_ADMIN
    );
  }
  function _onlyBridge() internal view virtual {
    require(
      IACLManager(ADDRESSES_PROVIDER.getACLManager()).isBridge(msg.sender),
      Errors.CALLER_NOT_BRIDGE
    );
  }
  /**
   * @dev Constructor.
   * @param provider The address of the PoolAddressesProvider contract
   */
  constructor(IPoolAddressesProvider provider) {
    ADDRESSES_PROVIDER = provider;
  }
  /**
   * @notice Initializes the Pool.
   * @dev Function is invoked by the proxy contract when the Pool contract is added to the
   * PoolAddressesProvider of the market.
   * @dev Caching the address of the PoolAddressesProvider in order to reduce gas consumption on subsequent operations
   * @param provider The address of the PoolAddressesProvider
   */
  function initialize(IPoolAddressesProvider provider) external virtual;
  /// @inheritdoc IPool
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external virtual override onlyBridge {
    BridgeLogic.executeMintUnbacked(
      _reserves,
      _reservesList,
      _usersConfig[onBehalfOf],
      asset,
      amount,
      onBehalfOf,
      referralCode
    );
  }
  /// @inheritdoc IPool
  function backUnbacked(
    address asset,
    uint256 amount,
    uint256 fee
  ) external virtual override onlyBridge returns (uint256) {
    return
      BridgeLogic.executeBackUnbacked(_reserves[asset], asset, amount, fee, _bridgeProtocolFee);
  }
  /// @inheritdoc IPool
  function supply(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) public virtual override {
    SupplyLogic.executeSupply(
      _reserves,
      _reservesList,
      _usersConfig[onBehalfOf],
      DataTypes.ExecuteSupplyParams({
        asset: asset,
        amount: amount,
        onBehalfOf: onBehalfOf,
        referralCode: referralCode
      })
    );
  }
  /// @inheritdoc IPool
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) public virtual override {
    try
      IERC20WithPermit(asset).permit(
        msg.sender,
        address(this),
        amount,
        deadline,
        permitV,
        permitR,
        permitS
      )
    {} catch {}
    SupplyLogic.executeSupply(
      _reserves,
      _reservesList,
      _usersConfig[onBehalfOf],
      DataTypes.ExecuteSupplyParams({
        asset: asset,
        amount: amount,
        onBehalfOf: onBehalfOf,
        referralCode: referralCode
      })
    );
  }
  /// @inheritdoc IPool
  function withdraw(
    address asset,
    uint256 amount,
    address to
  ) public virtual override returns (uint256) {
    return
      SupplyLogic.executeWithdraw(
        _reserves,
        _reservesList,
        _eModeCategories,
        _usersConfig[msg.sender],
        DataTypes.ExecuteWithdrawParams({
          asset: asset,
          amount: amount,
          to: to,
          reservesCount: _reservesCount,
          oracle: ADDRESSES_PROVIDER.getPriceOracle(),
          userEModeCategory: _usersEModeCategory[msg.sender]
        })
      );
  }
  /// @inheritdoc IPool
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) public virtual override {
    BorrowLogic.executeBorrow(
      _reserves,
      _reservesList,
      _eModeCategories,
      _usersConfig[onBehalfOf],
      DataTypes.ExecuteBorrowParams({
        asset: asset,
        user: msg.sender,
        onBehalfOf: onBehalfOf,
        amount: amount,
        interestRateMode: DataTypes.InterestRateMode(interestRateMode),
        referralCode: referralCode,
        releaseUnderlying: true,
        reservesCount: _reservesCount,
        oracle: ADDRESSES_PROVIDER.getPriceOracle(),
        userEModeCategory: _usersEModeCategory[onBehalfOf],
        priceOracleSentinel: ADDRESSES_PROVIDER.getPriceOracleSentinel()
      })
    );
  }
  /// @inheritdoc IPool
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) public virtual override returns (uint256) {
    return
      BorrowLogic.executeRepay(
        _reserves,
        _reservesList,
        _usersConfig[onBehalfOf],
        DataTypes.ExecuteRepayParams({
          asset: asset,
          amount: amount,
          interestRateMode: DataTypes.InterestRateMode(interestRateMode),
          onBehalfOf: onBehalfOf,
          useATokens: false
        })
      );
  }
  /// @inheritdoc IPool
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) public virtual override returns (uint256) {
    try
      IERC20WithPermit(asset).permit(
        msg.sender,
        address(this),
        amount,
        deadline,
        permitV,
        permitR,
        permitS
      )
    {} catch {}
    {
      DataTypes.ExecuteRepayParams memory params = DataTypes.ExecuteRepayParams({
        asset: asset,
        amount: amount,
        interestRateMode: DataTypes.InterestRateMode(interestRateMode),
        onBehalfOf: onBehalfOf,
        useATokens: false
      });
      return BorrowLogic.executeRepay(_reserves, _reservesList, _usersConfig[onBehalfOf], params);
    }
  }
  /// @inheritdoc IPool
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) public virtual override returns (uint256) {
    return
      BorrowLogic.executeRepay(
        _reserves,
        _reservesList,
        _usersConfig[msg.sender],
        DataTypes.ExecuteRepayParams({
          asset: asset,
          amount: amount,
          interestRateMode: DataTypes.InterestRateMode(interestRateMode),
          onBehalfOf: msg.sender,
          useATokens: true
        })
      );
  }
  /// @inheritdoc IPool
  function setUserUseReserveAsCollateral(
    address asset,
    bool useAsCollateral
  ) public virtual override {
    SupplyLogic.executeUseReserveAsCollateral(
      _reserves,
      _reservesList,
      _eModeCategories,
      _usersConfig[msg.sender],
      asset,
      useAsCollateral,
      _reservesCount,
      ADDRESSES_PROVIDER.getPriceOracle(),
      _usersEModeCategory[msg.sender]
    );
  }
  /// @inheritdoc IPool
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) public virtual override {
    LiquidationLogic.executeLiquidationCall(
      _reserves,
      _reservesList,
      _usersConfig,
      _eModeCategories,
      DataTypes.ExecuteLiquidationCallParams({
        reservesCount: _reservesCount,
        debtToCover: debtToCover,
        collateralAsset: collateralAsset,
        debtAsset: debtAsset,
        user: user,
        receiveAToken: receiveAToken,
        priceOracle: ADDRESSES_PROVIDER.getPriceOracle(),
        userEModeCategory: _usersEModeCategory[user],
        priceOracleSentinel: ADDRESSES_PROVIDER.getPriceOracleSentinel()
      })
    );
  }
  /// @inheritdoc IPool
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) public virtual override {
    DataTypes.FlashloanParams memory flashParams = DataTypes.FlashloanParams({
      receiverAddress: receiverAddress,
      assets: assets,
      amounts: amounts,
      interestRateModes: interestRateModes,
      onBehalfOf: onBehalfOf,
      params: params,
      referralCode: referralCode,
      flashLoanPremiumToProtocol: _flashLoanPremiumToProtocol,
      flashLoanPremiumTotal: _flashLoanPremiumTotal,
      reservesCount: _reservesCount,
      addressesProvider: address(ADDRESSES_PROVIDER),
      pool: address(this),
      userEModeCategory: _usersEModeCategory[onBehalfOf],
      isAuthorizedFlashBorrower: IACLManager(ADDRESSES_PROVIDER.getACLManager()).isFlashBorrower(
        msg.sender
      )
    });
    FlashLoanLogic.executeFlashLoan(
      _reserves,
      _reservesList,
      _eModeCategories,
      _usersConfig[onBehalfOf],
      flashParams
    );
  }
  /// @inheritdoc IPool
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) public virtual override {
    DataTypes.FlashloanSimpleParams memory flashParams = DataTypes.FlashloanSimpleParams({
      receiverAddress: receiverAddress,
      asset: asset,
      amount: amount,
      params: params,
      referralCode: referralCode,
      flashLoanPremiumToProtocol: _flashLoanPremiumToProtocol,
      flashLoanPremiumTotal: _flashLoanPremiumTotal
    });
    FlashLoanLogic.executeFlashLoanSimple(_reserves[asset], flashParams);
  }
  /// @inheritdoc IPool
  function mintToTreasury(address[] calldata assets) external virtual override {
    PoolLogic.executeMintToTreasury(_reserves, assets);
  }
  /// @inheritdoc IPool
  function getReserveDataExtended(
    address asset
  ) external view returns (DataTypes.ReserveData memory) {
    return _reserves[asset];
  }
  /// @inheritdoc IPool
  function getReserveData(
    address asset
  ) external view virtual override returns (DataTypes.ReserveDataLegacy memory) {
    DataTypes.ReserveData memory reserve = _reserves[asset];
    DataTypes.ReserveDataLegacy memory res;
    res.configuration = reserve.configuration;
    res.liquidityIndex = reserve.liquidityIndex;
    res.currentLiquidityRate = reserve.currentLiquidityRate;
    res.variableBorrowIndex = reserve.variableBorrowIndex;
    res.currentVariableBorrowRate = reserve.currentVariableBorrowRate;
    res.lastUpdateTimestamp = reserve.lastUpdateTimestamp;
    res.id = reserve.id;
    res.aTokenAddress = reserve.aTokenAddress;
    res.variableDebtTokenAddress = reserve.variableDebtTokenAddress;
    res.interestRateStrategyAddress = reserve.interestRateStrategyAddress;
    res.accruedToTreasury = reserve.accruedToTreasury;
    res.unbacked = reserve.unbacked;
    res.isolationModeTotalDebt = reserve.isolationModeTotalDebt;
    // This is a temporary workaround for integrations that are broken by Aave 3.2
    // While the new pool data provider is backward compatible, some integrations hard-code an old implementation
    // To allow them to not have any infrastructural blocker, a mock must be configured in the Aave Pool Addresses Provider, returning zero on all required view methods, instead of reverting
    res.stableDebtTokenAddress = ADDRESSES_PROVIDER.getAddress(bytes32('MOCK_STABLE_DEBT'));
    return res;
  }
  /// @inheritdoc IPool
  function getVirtualUnderlyingBalance(
    address asset
  ) external view virtual override returns (uint128) {
    return _reserves[asset].virtualUnderlyingBalance;
  }
  /// @inheritdoc IPool
  function getUserAccountData(
    address user
  )
    external
    view
    virtual
    override
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    )
  {
    return
      PoolLogic.executeGetUserAccountData(
        _reserves,
        _reservesList,
        _eModeCategories,
        DataTypes.CalculateUserAccountDataParams({
          userConfig: _usersConfig[user],
          reservesCount: _reservesCount,
          user: user,
          oracle: ADDRESSES_PROVIDER.getPriceOracle(),
          userEModeCategory: _usersEModeCategory[user]
        })
      );
  }
  /// @inheritdoc IPool
  function getConfiguration(
    address asset
  ) external view virtual override returns (DataTypes.ReserveConfigurationMap memory) {
    return _reserves[asset].configuration;
  }
  /// @inheritdoc IPool
  function getUserConfiguration(
    address user
  ) external view virtual override returns (DataTypes.UserConfigurationMap memory) {
    return _usersConfig[user];
  }
  /// @inheritdoc IPool
  function getReserveNormalizedIncome(
    address asset
  ) external view virtual override returns (uint256) {
    return _reserves[asset].getNormalizedIncome();
  }
  /// @inheritdoc IPool
  function getReserveNormalizedVariableDebt(
    address asset
  ) external view virtual override returns (uint256) {
    return _reserves[asset].getNormalizedDebt();
  }
  /// @inheritdoc IPool
  function getReservesList() external view virtual override returns (address[] memory) {
    uint256 reservesListCount = _reservesCount;
    uint256 droppedReservesCount = 0;
    address[] memory reservesList = new address[](reservesListCount);
    for (uint256 i = 0; i < reservesListCount; i++) {
      if (_reservesList[i] != address(0)) {
        reservesList[i - droppedReservesCount] = _reservesList[i];
      } else {
        droppedReservesCount++;
      }
    }
    // Reduces the length of the reserves array by `droppedReservesCount`
    assembly {
      mstore(reservesList, sub(reservesListCount, droppedReservesCount))
    }
    return reservesList;
  }
  /// @inheritdoc IPool
  function getReservesCount() external view virtual override returns (uint256) {
    return _reservesCount;
  }
  /// @inheritdoc IPool
  function getReserveAddressById(uint16 id) external view returns (address) {
    return _reservesList[id];
  }
  /// @inheritdoc IPool
  function BRIDGE_PROTOCOL_FEE() public view virtual override returns (uint256) {
    return _bridgeProtocolFee;
  }
  /// @inheritdoc IPool
  function FLASHLOAN_PREMIUM_TOTAL() public view virtual override returns (uint128) {
    return _flashLoanPremiumTotal;
  }
  /// @inheritdoc IPool
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() public view virtual override returns (uint128) {
    return _flashLoanPremiumToProtocol;
  }
  /// @inheritdoc IPool
  function MAX_NUMBER_RESERVES() public view virtual override returns (uint16) {
    return ReserveConfiguration.MAX_RESERVES_COUNT;
  }
  /// @inheritdoc IPool
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external virtual override {
    require(msg.sender == _reserves[asset].aTokenAddress, Errors.CALLER_NOT_ATOKEN);
    SupplyLogic.executeFinalizeTransfer(
      _reserves,
      _reservesList,
      _eModeCategories,
      _usersConfig,
      DataTypes.FinalizeTransferParams({
        asset: asset,
        from: from,
        to: to,
        amount: amount,
        balanceFromBefore: balanceFromBefore,
        balanceToBefore: balanceToBefore,
        reservesCount: _reservesCount,
        oracle: ADDRESSES_PROVIDER.getPriceOracle(),
        fromEModeCategory: _usersEModeCategory[from]
      })
    );
  }
  /// @inheritdoc IPool
  function initReserve(
    address asset,
    address aTokenAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external virtual override onlyPoolConfigurator {
    if (
      PoolLogic.executeInitReserve(
        _reserves,
        _reservesList,
        DataTypes.InitReserveParams({
          asset: asset,
          aTokenAddress: aTokenAddress,
          variableDebtAddress: variableDebtAddress,
          interestRateStrategyAddress: interestRateStrategyAddress,
          reservesCount: _reservesCount,
          maxNumberReserves: MAX_NUMBER_RESERVES()
        })
      )
    ) {
      _reservesCount++;
    }
  }
  /// @inheritdoc IPool
  function dropReserve(address asset) external virtual override onlyPoolConfigurator {
    PoolLogic.executeDropReserve(_reserves, _reservesList, asset);
  }
  /// @inheritdoc IPool
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external virtual override onlyPoolConfigurator {
    require(asset != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    require(_reserves[asset].id != 0 || _reservesList[0] == asset, Errors.ASSET_NOT_LISTED);
    _reserves[asset].interestRateStrategyAddress = rateStrategyAddress;
  }
  /// @inheritdoc IPool
  function syncIndexesState(address asset) external virtual override onlyPoolConfigurator {
    DataTypes.ReserveData storage reserve = _reserves[asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
  }
  /// @inheritdoc IPool
  function syncRatesState(address asset) external virtual override onlyPoolConfigurator {
    DataTypes.ReserveData storage reserve = _reserves[asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    ReserveLogic.updateInterestRatesAndVirtualBalance(reserve, reserveCache, asset, 0, 0);
  }
  /// @inheritdoc IPool
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external virtual override onlyPoolConfigurator {
    require(asset != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    require(_reserves[asset].id != 0 || _reservesList[0] == asset, Errors.ASSET_NOT_LISTED);
    _reserves[asset].configuration = configuration;
  }
  /// @inheritdoc IPool
  function updateBridgeProtocolFee(
    uint256 protocolFee
  ) external virtual override onlyPoolConfigurator {
    _bridgeProtocolFee = protocolFee;
  }
  /// @inheritdoc IPool
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external virtual override onlyPoolConfigurator {
    _flashLoanPremiumTotal = flashLoanPremiumTotal;
    _flashLoanPremiumToProtocol = flashLoanPremiumToProtocol;
  }
  /// @inheritdoc IPool
  function configureEModeCategory(
    uint8 id,
    DataTypes.EModeCategoryBaseConfiguration memory category
  ) external virtual override onlyPoolConfigurator {
    // category 0 is reserved for volatile heterogeneous assets and it's always disabled
    require(id != 0, Errors.EMODE_CATEGORY_RESERVED);
    _eModeCategories[id].ltv = category.ltv;
    _eModeCategories[id].liquidationThreshold = category.liquidationThreshold;
    _eModeCategories[id].liquidationBonus = category.liquidationBonus;
    _eModeCategories[id].label = category.label;
  }
  /// @inheritdoc IPool
  function configureEModeCategoryCollateralBitmap(
    uint8 id,
    uint128 collateralBitmap
  ) external virtual override onlyPoolConfigurator {
    // category 0 is reserved for volatile heterogeneous assets and it's always disabled
    require(id != 0, Errors.EMODE_CATEGORY_RESERVED);
    _eModeCategories[id].collateralBitmap = collateralBitmap;
  }
  /// @inheritdoc IPool
  function configureEModeCategoryBorrowableBitmap(
    uint8 id,
    uint128 borrowableBitmap
  ) external virtual override onlyPoolConfigurator {
    // category 0 is reserved for volatile heterogeneous assets and it's always disabled
    require(id != 0, Errors.EMODE_CATEGORY_RESERVED);
    _eModeCategories[id].borrowableBitmap = borrowableBitmap;
  }
  /// @inheritdoc IPool
  function getEModeCategoryData(
    uint8 id
  ) external view virtual override returns (DataTypes.EModeCategoryLegacy memory) {
    DataTypes.EModeCategory memory category = _eModeCategories[id];
    return
      DataTypes.EModeCategoryLegacy({
        ltv: category.ltv,
        liquidationThreshold: category.liquidationThreshold,
        liquidationBonus: category.liquidationBonus,
        priceSource: address(0),
        label: category.label
      });
  }
  /// @inheritdoc IPool
  function getEModeCategoryCollateralConfig(
    uint8 id
  ) external view returns (DataTypes.CollateralConfig memory) {
    return
      DataTypes.CollateralConfig({
        ltv: _eModeCategories[id].ltv,
        liquidationThreshold: _eModeCategories[id].liquidationThreshold,
        liquidationBonus: _eModeCategories[id].liquidationBonus
      });
  }
  /// @inheritdoc IPool
  function getEModeCategoryLabel(uint8 id) external view returns (string memory) {
    return _eModeCategories[id].label;
  }
  /// @inheritdoc IPool
  function getEModeCategoryCollateralBitmap(uint8 id) external view returns (uint128) {
    return _eModeCategories[id].collateralBitmap;
  }
  /// @inheritdoc IPool
  function getEModeCategoryBorrowableBitmap(uint8 id) external view returns (uint128) {
    return _eModeCategories[id].borrowableBitmap;
  }
  /// @inheritdoc IPool
  function setUserEMode(uint8 categoryId) external virtual override {
    EModeLogic.executeSetUserEMode(
      _reserves,
      _reservesList,
      _eModeCategories,
      _usersEModeCategory,
      _usersConfig[msg.sender],
      DataTypes.ExecuteSetUserEModeParams({
        reservesCount: _reservesCount,
        oracle: ADDRESSES_PROVIDER.getPriceOracle(),
        categoryId: categoryId
      })
    );
  }
  /// @inheritdoc IPool
  function getUserEMode(address user) external view virtual override returns (uint256) {
    return _usersEModeCategory[user];
  }
  /// @inheritdoc IPool
  function resetIsolationModeTotalDebt(
    address asset
  ) external virtual override onlyPoolConfigurator {
    PoolLogic.executeResetIsolationModeTotalDebt(_reserves, asset);
  }
  /// @inheritdoc IPool
  function getLiquidationGracePeriod(address asset) external virtual override returns (uint40) {
    return _reserves[asset].liquidationGracePeriodUntil;
  }
  /// @inheritdoc IPool
  function setLiquidationGracePeriod(
    address asset,
    uint40 until
  ) external virtual override onlyPoolConfigurator {
    require(_reserves[asset].id != 0 || _reservesList[0] == asset, Errors.ASSET_NOT_LISTED);
    PoolLogic.executeSetLiquidationGracePeriod(_reserves, asset, until);
  }
  /// @inheritdoc IPool
  function rescueTokens(
    address token,
    address to,
    uint256 amount
  ) external virtual override onlyPoolAdmin {
    PoolLogic.executeRescueTokens(token, to, amount);
  }
  /// @inheritdoc IPool
  /// @dev Deprecated: maintained for compatibility purposes
  function deposit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external virtual override {
    SupplyLogic.executeSupply(
      _reserves,
      _reservesList,
      _usersConfig[onBehalfOf],
      DataTypes.ExecuteSupplyParams({
        asset: asset,
        amount: amount,
        onBehalfOf: onBehalfOf,
        referralCode: referralCode
      })
    );
  }
  /// @inheritdoc IPool
  function getFlashLoanLogic() external pure returns (address) {
    return address(FlashLoanLogic);
  }
  /// @inheritdoc IPool
  function getBorrowLogic() external pure returns (address) {
    return address(BorrowLogic);
  }
  /// @inheritdoc IPool
  function getBridgeLogic() external pure returns (address) {
    return address(BridgeLogic);
  }
  /// @inheritdoc IPool
  function getEModeLogic() external pure returns (address) {
    return address(EModeLogic);
  }
  /// @inheritdoc IPool
  function getLiquidationLogic() external pure returns (address) {
    return address(LiquidationLogic);
  }
  /// @inheritdoc IPool
  function getPoolLogic() external pure returns (address) {
    return address(PoolLogic);
  }
  /// @inheritdoc IPool
  function getSupplyLogic() external pure returns (address) {
    return address(SupplyLogic);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );
  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );
  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);
  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;
  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);
  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;
  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);
  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;
  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);
  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);
  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;
  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);
  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;
  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);
  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;
  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);
  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;
  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);
  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
/**
 * @title VersionedInitializable
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 * @notice Helper contract to implement initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * @dev WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 */
abstract contract VersionedInitializable {
  /**
   * @dev Indicates that the contract has been initialized.
   */
  uint256 private lastInitializedRevision = 0;
  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;
  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    uint256 revision = getRevision();
    require(
      initializing || isConstructor() || revision > lastInitializedRevision,
      'Contract instance has already been initialized'
    );
    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      lastInitializedRevision = revision;
    }
    _;
    if (isTopLevelCall) {
      initializing = false;
    }
  }
  /**
   * @notice Returns the revision number of the contract
   * @dev Needs to be defined in the inherited class as a constant.
   * @return The revision number
   */
  function getRevision() internal pure virtual returns (uint256);
  /**
   * @notice Returns true if and only if the function is running in the constructor
   * @return True if the function is running in the constructor
   */
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    uint256 cs;
    //solium-disable-next-line
    assembly {
      cs := extcodesize(address())
    }
    return cs == 0;
  }
  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 internal constant LTV_MASK =                       0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
  uint256 internal constant LIQUIDATION_THRESHOLD_MASK =     0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_BONUS_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
  uint256 internal constant DECIMALS_MASK =                  0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant ACTIVE_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FROZEN_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWING_MASK =                 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
  // @notice there is an unoccupied hole of 1 bit at position 59 from pre 3.2 stableBorrowRateEnabled
  uint256 internal constant PAUSED_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWABLE_IN_ISOLATION_MASK =   0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SILOED_BORROWING_MASK =          0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FLASHLOAN_ENABLED_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant RESERVE_FACTOR_MASK =            0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROW_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SUPPLY_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK =  0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  // @notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_MASK =         0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant DEBT_CEILING_MASK =              0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant VIRTUAL_ACC_ACTIVE_MASK =        0xEFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
  uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
  uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
  uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
  uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
  uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
  uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
  uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;
  uint256 internal constant VIRTUAL_ACC_START_BIT_POSITION = 252;
  uint256 internal constant MAX_VALID_LTV = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 internal constant MAX_VALID_DECIMALS = 255;
  uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
  uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
  uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
  uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
  uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
  uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;
  uint256 public constant DEBT_CEILING_DECIMALS = 2;
  uint16 public constant MAX_RESERVES_COUNT = 128;
  /**
   * @notice Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv The new ltv
   */
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);
    self.data = (self.data & LTV_MASK) | ltv;
  }
  /**
   * @notice Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   */
  function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
    return self.data & ~LTV_MASK;
  }
  /**
   * @notice Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   */
  function setLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 threshold
  ) internal pure {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);
    self.data =
      (self.data & LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }
  /**
   * @notice Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   */
  function getLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }
  /**
   * @notice Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   */
  function setLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 bonus
  ) internal pure {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);
    self.data =
      (self.data & LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }
  /**
   * @notice Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   */
  function getLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }
  /**
   * @notice Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   */
  function setDecimals(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 decimals
  ) internal pure {
    require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);
    self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }
  /**
   * @notice Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   */
  function getDecimals(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }
  /**
   * @notice Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }
  /**
   * @notice Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   */
  function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~ACTIVE_MASK) != 0;
  }
  /**
   * @notice Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   */
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }
  /**
   * @notice Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   */
  function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~FROZEN_MASK) != 0;
  }
  /**
   * @notice Sets the paused state of the reserve
   * @param self The reserve configuration
   * @param paused The paused state
   */
  function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
    self.data =
      (self.data & PAUSED_MASK) |
      (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the paused state of the reserve
   * @param self The reserve configuration
   * @return The paused state
   */
  function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~PAUSED_MASK) != 0;
  }
  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
   * amount will be accumulated in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @param borrowable True if the asset is borrowable
   */
  function setBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self,
    bool borrowable
  ) internal pure {
    self.data =
      (self.data & BORROWABLE_IN_ISOLATION_MASK) |
      (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrowable in isolation flag for the reserve.
   * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
   * isolated collateral is accounted for in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @return The borrowable in isolation flag
   */
  function getBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0;
  }
  /**
   * @notice Sets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @param siloed True if the asset is siloed
   */
  function setSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self,
    bool siloed
  ) internal pure {
    self.data =
      (self.data & SILOED_BORROWING_MASK) |
      (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
  }
  /**
   * @notice Gets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @return The siloed borrowing flag
   */
  function getSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~SILOED_BORROWING_MASK) != 0;
  }
  /**
   * @notice Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   */
  function setBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   */
  function getBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWING_MASK) != 0;
  }
  /**
   * @notice Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   */
  function setReserveFactor(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 reserveFactor
  ) internal pure {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);
    self.data =
      (self.data & RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }
  /**
   * @notice Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   */
  function getReserveFactor(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }
  /**
   * @notice Sets the borrow cap of the reserve
   * @param self The reserve configuration
   * @param borrowCap The borrow cap
   */
  function setBorrowCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 borrowCap
  ) internal pure {
    require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);
    self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrow cap of the reserve
   * @param self The reserve configuration
   * @return The borrow cap
   */
  function getBorrowCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the supply cap of the reserve
   * @param self The reserve configuration
   * @param supplyCap The supply cap
   */
  function setSupplyCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 supplyCap
  ) internal pure {
    require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);
    self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
  }
  /**
   * @notice Gets the supply cap of the reserve
   * @param self The reserve configuration
   * @return The supply cap
   */
  function getSupplyCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the debt ceiling in isolation mode for the asset
   * @param self The reserve configuration
   * @param ceiling The maximum debt ceiling for the asset
   */
  function setDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 ceiling
  ) internal pure {
    require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);
    self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
  }
  /**
   * @notice Gets the debt ceiling for the asset if the asset is in isolation mode
   * @param self The reserve configuration
   * @return The debt ceiling (0 = isolation mode disabled)
   */
  function getDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
  }
  /**
   * @notice Sets the liquidation protocol fee of the reserve
   * @param self The reserve configuration
   * @param liquidationProtocolFee The liquidation protocol fee
   */
  function setLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 liquidationProtocolFee
  ) internal pure {
    require(
      liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
      Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
    );
    self.data =
      (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) |
      (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
  }
  /**
   * @dev Gets the liquidation protocol fee
   * @param self The reserve configuration
   * @return The liquidation protocol fee
   */
  function getLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return
      (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
  }
  /**
   * @notice Sets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @param unbackedMintCap The unbacked mint cap
   */
  function setUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 unbackedMintCap
  ) internal pure {
    require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);
    self.data =
      (self.data & UNBACKED_MINT_CAP_MASK) |
      (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
  }
  /**
   * @dev Gets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @return The unbacked mint cap
   */
  function getUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @param flashLoanEnabled True if the asset is flashloanable, false otherwise
   */
  function setFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool flashLoanEnabled
  ) internal pure {
    self.data =
      (self.data & FLASHLOAN_ENABLED_MASK) |
      (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @return The flashloanable flag
   */
  function getFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0;
  }
  /**
   * @notice Sets the virtual account active/not state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self,
    bool active
  ) internal pure {
    self.data =
      (self.data & VIRTUAL_ACC_ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << VIRTUAL_ACC_START_BIT_POSITION);
  }
  /**
   * @notice Gets the virtual account active/not state of the reserve
   * @dev The state should be true for all normal assets and should be false
   *  only in special cases (ex. GHO) where an asset is minted instead of supplied.
   * @param self The reserve configuration
   * @return The active state
   */
  function getIsVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~VIRTUAL_ACC_ACTIVE_MASK) != 0;
  }
  /**
   * @notice Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flag representing active
   * @return The state flag representing frozen
   * @return The state flag representing borrowing enabled
   * @return The state flag representing paused
   */
  function getFlags(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool, bool, bool, bool) {
    uint256 dataLocal = self.data;
    return (
      (dataLocal & ~ACTIVE_MASK) != 0,
      (dataLocal & ~FROZEN_MASK) != 0,
      (dataLocal & ~BORROWING_MASK) != 0,
      (dataLocal & ~PAUSED_MASK) != 0
    );
  }
  /**
   * @notice Gets the configuration parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing ltv
   * @return The state param representing liquidation threshold
   * @return The state param representing liquidation bonus
   * @return The state param representing reserve decimals
   * @return The state param representing reserve factor
   */
  function getParams(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256, uint256, uint256, uint256) {
    uint256 dataLocal = self.data;
    return (
      dataLocal & ~LTV_MASK,
      (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }
  /**
   * @notice Gets the caps parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing borrow cap
   * @return The state param representing supply cap.
   */
  function getCaps(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256) {
    uint256 dataLocal = self.data;
    return (
      (dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
      (dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
    );
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {Address} from '../../../dependencies/openzeppelin/contracts/Address.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {Errors} from '../helpers/Errors.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {GenericLogic} from './GenericLogic.sol';
/**
 * @title PoolLogic library
 * @author Aave
 * @notice Implements the logic for Pool specific functions
 */
library PoolLogic {
  using GPv2SafeERC20 for IERC20;
  using WadRayMath for uint256;
  using ReserveLogic for DataTypes.ReserveData;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  // See `IPool` for descriptions
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @notice Initialize an asset reserve and add the reserve to the list of reserves
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param params Additional parameters needed for initiation
   * @return true if appended, false if inserted at existing empty spot
   */
  function executeInitReserve(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.InitReserveParams memory params
  ) external returns (bool) {
    require(Address.isContract(params.asset), Errors.NOT_CONTRACT);
    reservesData[params.asset].init(
      params.aTokenAddress,
      params.variableDebtAddress,
      params.interestRateStrategyAddress
    );
    bool reserveAlreadyAdded = reservesData[params.asset].id != 0 ||
      reservesList[0] == params.asset;
    require(!reserveAlreadyAdded, Errors.RESERVE_ALREADY_ADDED);
    for (uint16 i = 0; i < params.reservesCount; i++) {
      if (reservesList[i] == address(0)) {
        reservesData[params.asset].id = i;
        reservesList[i] = params.asset;
        return false;
      }
    }
    require(params.reservesCount < params.maxNumberReserves, Errors.NO_MORE_RESERVES_ALLOWED);
    reservesData[params.asset].id = params.reservesCount;
    reservesList[params.reservesCount] = params.asset;
    return true;
  }
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function executeRescueTokens(address token, address to, uint256 amount) external {
    IERC20(token).safeTransfer(to, amount);
  }
  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param reservesData The state of all the reserves
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function executeMintToTreasury(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    address[] calldata assets
  ) external {
    for (uint256 i = 0; i < assets.length; i++) {
      address assetAddress = assets[i];
      DataTypes.ReserveData storage reserve = reservesData[assetAddress];
      // this cover both inactive reserves and invalid reserves since the flag will be 0 for both
      if (!reserve.configuration.getActive()) {
        continue;
      }
      uint256 accruedToTreasury = reserve.accruedToTreasury;
      if (accruedToTreasury != 0) {
        reserve.accruedToTreasury = 0;
        uint256 normalizedIncome = reserve.getNormalizedIncome();
        uint256 amountToMint = accruedToTreasury.rayMul(normalizedIncome);
        IAToken(reserve.aTokenAddress).mintToTreasury(amountToMint, normalizedIncome);
        emit MintedToTreasury(assetAddress, amountToMint);
      }
    }
  }
  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param reservesData The state of all the reserves
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function executeResetIsolationModeTotalDebt(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    address asset
  ) external {
    require(reservesData[asset].configuration.getDebtCeiling() == 0, Errors.DEBT_CEILING_NOT_ZERO);
    reservesData[asset].isolationModeTotalDebt = 0;
    emit IsolationModeTotalDebtUpdated(asset, 0);
  }
  /**
   * @notice Sets the liquidation grace period of the asset
   * @param reservesData The state of all the reserves
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   */
  function executeSetLiquidationGracePeriod(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    address asset,
    uint40 until
  ) external {
    reservesData[asset].liquidationGracePeriodUntil = until;
  }
  /**
   * @notice Drop a reserve
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param asset The address of the underlying asset of the reserve
   */
  function executeDropReserve(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    address asset
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[asset];
    ValidationLogic.validateDropReserve(reservesList, reserve, asset);
    reservesList[reservesData[asset].id] = address(0);
    delete reservesData[asset];
  }
  /**
   * @notice Returns the user account data across all the reserves
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional params needed for the calculation
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function executeGetUserAccountData(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.CalculateUserAccountDataParams memory params
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    )
  {
    (
      totalCollateralBase,
      totalDebtBase,
      ltv,
      currentLiquidationThreshold,
      healthFactor,
    ) = GenericLogic.calculateUserAccountData(reservesData, reservesList, eModeCategories, params);
    availableBorrowsBase = GenericLogic.calculateAvailableBorrows(
      totalCollateralBase,
      totalDebtBase,
      ltv
    );
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {MathUtils} from '../math/MathUtils.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
/**
 * @title ReserveLogic library
 * @author Aave
 * @notice Implements the logic to update the reserves state
 */
library ReserveLogic {
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  using ReserveLogic for DataTypes.ReserveData;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  // See `IPool` for descriptions
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @notice Returns the ongoing normalized income for the reserve.
   * @dev A value of 1e27 means there is no income. As time passes, the income is accrued
   * @dev A value of 2*1e27 means for each unit of asset one unit of income has been accrued
   * @param reserve The reserve object
   * @return The normalized income, expressed in ray
   */
  function getNormalizedIncome(
    DataTypes.ReserveData storage reserve
  ) internal view returns (uint256) {
    uint40 timestamp = reserve.lastUpdateTimestamp;
    //solium-disable-next-line
    if (timestamp == block.timestamp) {
      //if the index was updated in the same block, no need to perform any calculation
      return reserve.liquidityIndex;
    } else {
      return
        MathUtils.calculateLinearInterest(reserve.currentLiquidityRate, timestamp).rayMul(
          reserve.liquidityIndex
        );
    }
  }
  /**
   * @notice Returns the ongoing normalized variable debt for the reserve.
   * @dev A value of 1e27 means there is no debt. As time passes, the debt is accrued
   * @dev A value of 2*1e27 means that for each unit of debt, one unit worth of interest has been accumulated
   * @param reserve The reserve object
   * @return The normalized variable debt, expressed in ray
   */
  function getNormalizedDebt(
    DataTypes.ReserveData storage reserve
  ) internal view returns (uint256) {
    uint40 timestamp = reserve.lastUpdateTimestamp;
    //solium-disable-next-line
    if (timestamp == block.timestamp) {
      //if the index was updated in the same block, no need to perform any calculation
      return reserve.variableBorrowIndex;
    } else {
      return
        MathUtils.calculateCompoundedInterest(reserve.currentVariableBorrowRate, timestamp).rayMul(
          reserve.variableBorrowIndex
        );
    }
  }
  /**
   * @notice Updates the liquidity cumulative index and the variable borrow index.
   * @param reserve The reserve object
   * @param reserveCache The caching layer for the reserve data
   */
  function updateState(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    // If time didn't pass since last stored timestamp, skip state update
    //solium-disable-next-line
    if (reserve.lastUpdateTimestamp == uint40(block.timestamp)) {
      return;
    }
    _updateIndexes(reserve, reserveCache);
    _accrueToTreasury(reserve, reserveCache);
    //solium-disable-next-line
    reserve.lastUpdateTimestamp = uint40(block.timestamp);
  }
  /**
   * @notice Accumulates a predefined amount of asset to the reserve as a fixed, instantaneous income. Used for example
   * to accumulate the flashloan fee to the reserve, and spread it between all the suppliers.
   * @param reserve The reserve object
   * @param totalLiquidity The total liquidity available in the reserve
   * @param amount The amount to accumulate
   * @return The next liquidity index of the reserve
   */
  function cumulateToLiquidityIndex(
    DataTypes.ReserveData storage reserve,
    uint256 totalLiquidity,
    uint256 amount
  ) internal returns (uint256) {
    //next liquidity index is calculated this way: `((amount / totalLiquidity) + 1) * liquidityIndex`
    //division `amount / totalLiquidity` done in ray for precision
    uint256 result = (amount.wadToRay().rayDiv(totalLiquidity.wadToRay()) + WadRayMath.RAY).rayMul(
      reserve.liquidityIndex
    );
    reserve.liquidityIndex = result.toUint128();
    return result;
  }
  /**
   * @notice Initializes a reserve.
   * @param reserve The reserve object
   * @param aTokenAddress The address of the overlying atoken contract
   * @param variableDebtTokenAddress The address of the overlying variable debt token contract
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function init(
    DataTypes.ReserveData storage reserve,
    address aTokenAddress,
    address variableDebtTokenAddress,
    address interestRateStrategyAddress
  ) internal {
    require(reserve.aTokenAddress == address(0), Errors.RESERVE_ALREADY_INITIALIZED);
    reserve.liquidityIndex = uint128(WadRayMath.RAY);
    reserve.variableBorrowIndex = uint128(WadRayMath.RAY);
    reserve.aTokenAddress = aTokenAddress;
    reserve.variableDebtTokenAddress = variableDebtTokenAddress;
    reserve.interestRateStrategyAddress = interestRateStrategyAddress;
  }
  /**
   * @notice Updates the reserve current variable borrow rate and the current liquidity rate.
   * @param reserve The reserve reserve to be updated
   * @param reserveCache The caching layer for the reserve data
   * @param reserveAddress The address of the reserve to be updated
   * @param liquidityAdded The amount of liquidity added to the protocol (supply or repay) in the previous action
   * @param liquidityTaken The amount of liquidity taken from the protocol (redeem or borrow)
   */
  function updateInterestRatesAndVirtualBalance(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache,
    address reserveAddress,
    uint256 liquidityAdded,
    uint256 liquidityTaken
  ) internal {
    uint256 totalVariableDebt = reserveCache.nextScaledVariableDebt.rayMul(
      reserveCache.nextVariableBorrowIndex
    );
    (uint256 nextLiquidityRate, uint256 nextVariableRate) = IReserveInterestRateStrategy(
      reserve.interestRateStrategyAddress
    ).calculateInterestRates(
        DataTypes.CalculateInterestRatesParams({
          unbacked: reserve.unbacked,
          liquidityAdded: liquidityAdded,
          liquidityTaken: liquidityTaken,
          totalDebt: totalVariableDebt,
          reserveFactor: reserveCache.reserveFactor,
          reserve: reserveAddress,
          usingVirtualBalance: reserve.configuration.getIsVirtualAccActive(),
          virtualUnderlyingBalance: reserve.virtualUnderlyingBalance
        })
      );
    reserve.currentLiquidityRate = nextLiquidityRate.toUint128();
    reserve.currentVariableBorrowRate = nextVariableRate.toUint128();
    // Only affect virtual balance if the reserve uses it
    if (reserve.configuration.getIsVirtualAccActive()) {
      if (liquidityAdded > 0) {
        reserve.virtualUnderlyingBalance += liquidityAdded.toUint128();
      }
      if (liquidityTaken > 0) {
        reserve.virtualUnderlyingBalance -= liquidityTaken.toUint128();
      }
    }
    emit ReserveDataUpdated(
      reserveAddress,
      nextLiquidityRate,
      0,
      nextVariableRate,
      reserveCache.nextLiquidityIndex,
      reserveCache.nextVariableBorrowIndex
    );
  }
  /**
   * @notice Mints part of the repaid interest to the reserve treasury as a function of the reserve factor for the
   * specific asset.
   * @param reserve The reserve to be updated
   * @param reserveCache The caching layer for the reserve data
   */
  function _accrueToTreasury(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    if (reserveCache.reserveFactor == 0) {
      return;
    }
    //calculate the total variable debt at moment of the last interaction
    uint256 prevTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
      reserveCache.currVariableBorrowIndex
    );
    //calculate the new total variable debt after accumulation of the interest on the index
    uint256 currTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
      reserveCache.nextVariableBorrowIndex
    );
    //debt accrued is the sum of the current debt minus the sum of the debt at the last update
    uint256 totalDebtAccrued = currTotalVariableDebt - prevTotalVariableDebt;
    uint256 amountToMint = totalDebtAccrued.percentMul(reserveCache.reserveFactor);
    if (amountToMint != 0) {
      reserve.accruedToTreasury += amountToMint.rayDiv(reserveCache.nextLiquidityIndex).toUint128();
    }
  }
  /**
   * @notice Updates the reserve indexes and the timestamp of the update.
   * @param reserve The reserve reserve to be updated
   * @param reserveCache The cache layer holding the cached protocol data
   */
  function _updateIndexes(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    // Only cumulating on the supply side if there is any income being produced
    // The case of Reserve Factor 100% is not a problem (currentLiquidityRate == 0),
    // as liquidity index should not be updated
    if (reserveCache.currLiquidityRate != 0) {
      uint256 cumulatedLiquidityInterest = MathUtils.calculateLinearInterest(
        reserveCache.currLiquidityRate,
        reserveCache.reserveLastUpdateTimestamp
      );
      reserveCache.nextLiquidityIndex = cumulatedLiquidityInterest.rayMul(
        reserveCache.currLiquidityIndex
      );
      reserve.liquidityIndex = reserveCache.nextLiquidityIndex.toUint128();
    }
    // Variable borrow index only gets updated if there is any variable debt.
    // reserveCache.currVariableBorrowRate != 0 is not a correct validation,
    // because a positive base variable rate can be stored on
    // reserveCache.currVariableBorrowRate, but the index should not increase
    if (reserveCache.currScaledVariableDebt != 0) {
      uint256 cumulatedVariableBorrowInterest = MathUtils.calculateCompoundedInterest(
        reserveCache.currVariableBorrowRate,
        reserveCache.reserveLastUpdateTimestamp
      );
      reserveCache.nextVariableBorrowIndex = cumulatedVariableBorrowInterest.rayMul(
        reserveCache.currVariableBorrowIndex
      );
      reserve.variableBorrowIndex = reserveCache.nextVariableBorrowIndex.toUint128();
    }
  }
  /**
   * @notice Creates a cache object to avoid repeated storage reads and external contract calls when updating state and
   * interest rates.
   * @param reserve The reserve object for which the cache will be filled
   * @return The cache object
   */
  function cache(
    DataTypes.ReserveData storage reserve
  ) internal view returns (DataTypes.ReserveCache memory) {
    DataTypes.ReserveCache memory reserveCache;
    reserveCache.reserveConfiguration = reserve.configuration;
    reserveCache.reserveFactor = reserveCache.reserveConfiguration.getReserveFactor();
    reserveCache.currLiquidityIndex = reserveCache.nextLiquidityIndex = reserve.liquidityIndex;
    reserveCache.currVariableBorrowIndex = reserveCache.nextVariableBorrowIndex = reserve
      .variableBorrowIndex;
    reserveCache.currLiquidityRate = reserve.currentLiquidityRate;
    reserveCache.currVariableBorrowRate = reserve.currentVariableBorrowRate;
    reserveCache.aTokenAddress = reserve.aTokenAddress;
    reserveCache.variableDebtTokenAddress = reserve.variableDebtTokenAddress;
    reserveCache.reserveLastUpdateTimestamp = reserve.lastUpdateTimestamp;
    reserveCache.currScaledVariableDebt = reserveCache.nextScaledVariableDebt = IVariableDebtToken(
      reserveCache.variableDebtTokenAddress
    ).scaledTotalSupply();
    return reserveCache;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
/**
 * @title EModeLogic library
 * @author Aave
 * @notice Implements the base logic for all the actions related to the eMode
 */
library EModeLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  // See `IPool` for descriptions
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @notice Updates the user efficiency mode category
   * @dev Will revert if user is borrowing non-compatible asset or change will drop HF < HEALTH_FACTOR_LIQUIDATION_THRESHOLD
   * @dev Emits the `UserEModeSet` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param usersEModeCategory The state of all users efficiency mode category
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the setUserEMode function
   */
  function executeSetUserEMode(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    mapping(address => uint8) storage usersEModeCategory,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteSetUserEModeParams memory params
  ) external {
    if (usersEModeCategory[msg.sender] == params.categoryId) return;
    ValidationLogic.validateSetUserEMode(
      eModeCategories,
      userConfig,
      params.reservesCount,
      params.categoryId
    );
    usersEModeCategory[msg.sender] = params.categoryId;
    ValidationLogic.validateHealthFactor(
      reservesData,
      reservesList,
      eModeCategories,
      userConfig,
      msg.sender,
      params.categoryId,
      params.reservesCount,
      params.oracle
    );
    emit UserEModeSet(msg.sender, params.categoryId);
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {Errors} from '../helpers/Errors.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
/**
 * @title SupplyLogic library
 * @author Aave
 * @notice Implements the base logic for supply/withdraw
 */
library SupplyLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  // See `IPool` for descriptions
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @notice Implements the supply feature. Through `supply()`, users supply assets to the Aave protocol.
   * @dev Emits the `Supply()` event.
   * @dev In the first supply action, `ReserveUsedAsCollateralEnabled()` is emitted, if the asset can be enabled as
   * collateral.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the supply function
   */
  function executeSupply(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteSupplyParams memory params
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    ValidationLogic.validateSupply(reserveCache, reserve, params.amount, params.onBehalfOf);
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, params.asset, params.amount, 0);
    IERC20(params.asset).safeTransferFrom(msg.sender, reserveCache.aTokenAddress, params.amount);
    bool isFirstSupply = IAToken(reserveCache.aTokenAddress).mint(
      msg.sender,
      params.onBehalfOf,
      params.amount,
      reserveCache.nextLiquidityIndex
    );
    if (isFirstSupply) {
      if (
        ValidationLogic.validateAutomaticUseAsCollateral(
          reservesData,
          reservesList,
          userConfig,
          reserveCache.reserveConfiguration,
          reserveCache.aTokenAddress
        )
      ) {
        userConfig.setUsingAsCollateral(reserve.id, true);
        emit ReserveUsedAsCollateralEnabled(params.asset, params.onBehalfOf);
      }
    }
    emit Supply(params.asset, msg.sender, params.onBehalfOf, params.amount, params.referralCode);
  }
  /**
   * @notice Implements the withdraw feature. Through `withdraw()`, users redeem their aTokens for the underlying asset
   * previously supplied in the Aave protocol.
   * @dev Emits the `Withdraw()` event.
   * @dev If the user withdraws everything, `ReserveUsedAsCollateralDisabled()` is emitted.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the withdraw function
   * @return The actual amount withdrawn
   */
  function executeWithdraw(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteWithdrawParams memory params
  ) external returns (uint256) {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    require(params.to != reserveCache.aTokenAddress, Errors.WITHDRAW_TO_ATOKEN);
    reserve.updateState(reserveCache);
    uint256 userBalance = IAToken(reserveCache.aTokenAddress).scaledBalanceOf(msg.sender).rayMul(
      reserveCache.nextLiquidityIndex
    );
    uint256 amountToWithdraw = params.amount;
    if (params.amount == type(uint256).max) {
      amountToWithdraw = userBalance;
    }
    ValidationLogic.validateWithdraw(reserveCache, amountToWithdraw, userBalance);
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, params.asset, 0, amountToWithdraw);
    bool isCollateral = userConfig.isUsingAsCollateral(reserve.id);
    if (isCollateral && amountToWithdraw == userBalance) {
      userConfig.setUsingAsCollateral(reserve.id, false);
      emit ReserveUsedAsCollateralDisabled(params.asset, msg.sender);
    }
    IAToken(reserveCache.aTokenAddress).burn(
      msg.sender,
      params.to,
      amountToWithdraw,
      reserveCache.nextLiquidityIndex
    );
    if (isCollateral && userConfig.isBorrowingAny()) {
      ValidationLogic.validateHFAndLtv(
        reservesData,
        reservesList,
        eModeCategories,
        userConfig,
        params.asset,
        msg.sender,
        params.reservesCount,
        params.oracle,
        params.userEModeCategory
      );
    }
    emit Withdraw(params.asset, msg.sender, params.to, amountToWithdraw);
    return amountToWithdraw;
  }
  /**
   * @notice Validates a transfer of aTokens. The sender is subjected to health factor validation to avoid
   * collateralization constraints violation.
   * @dev Emits the `ReserveUsedAsCollateralEnabled()` event for the `to` account, if the asset is being activated as
   * collateral.
   * @dev In case the `from` user transfers everything, `ReserveUsedAsCollateralDisabled()` is emitted for `from`.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param usersConfig The users configuration mapping that track the supplied/borrowed assets
   * @param params The additional parameters needed to execute the finalizeTransfer function
   */
  function executeFinalizeTransfer(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    mapping(address => DataTypes.UserConfigurationMap) storage usersConfig,
    DataTypes.FinalizeTransferParams memory params
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    ValidationLogic.validateTransfer(reserve);
    uint256 reserveId = reserve.id;
    uint256 scaledAmount = params.amount.rayDiv(reserve.getNormalizedIncome());
    if (params.from != params.to && scaledAmount != 0) {
      DataTypes.UserConfigurationMap storage fromConfig = usersConfig[params.from];
      if (fromConfig.isUsingAsCollateral(reserveId)) {
        if (fromConfig.isBorrowingAny()) {
          ValidationLogic.validateHFAndLtv(
            reservesData,
            reservesList,
            eModeCategories,
            usersConfig[params.from],
            params.asset,
            params.from,
            params.reservesCount,
            params.oracle,
            params.fromEModeCategory
          );
        }
        if (params.balanceFromBefore == params.amount) {
          fromConfig.setUsingAsCollateral(reserveId, false);
          emit ReserveUsedAsCollateralDisabled(params.asset, params.from);
        }
      }
      if (params.balanceToBefore == 0) {
        DataTypes.UserConfigurationMap storage toConfig = usersConfig[params.to];
        if (
          ValidationLogic.validateAutomaticUseAsCollateral(
            reservesData,
            reservesList,
            toConfig,
            reserve.configuration,
            reserve.aTokenAddress
          )
        ) {
          toConfig.setUsingAsCollateral(reserveId, true);
          emit ReserveUsedAsCollateralEnabled(params.asset, params.to);
        }
      }
    }
  }
  /**
   * @notice Executes the 'set as collateral' feature. A user can choose to activate or deactivate an asset as
   * collateral at any point in time. Deactivating an asset as collateral is subjected to the usual health factor
   * checks to ensure collateralization.
   * @dev Emits the `ReserveUsedAsCollateralEnabled()` event if the asset can be activated as collateral.
   * @dev In case the asset is being deactivated as collateral, `ReserveUsedAsCollateralDisabled()` is emitted.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The users configuration mapping that track the supplied/borrowed assets
   * @param asset The address of the asset being configured as collateral
   * @param useAsCollateral True if the user wants to set the asset as collateral, false otherwise
   * @param reservesCount The number of initialized reserves
   * @param priceOracle The address of the price oracle
   * @param userEModeCategory The eMode category chosen by the user
   */
  function executeUseReserveAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    address asset,
    bool useAsCollateral,
    uint256 reservesCount,
    address priceOracle,
    uint8 userEModeCategory
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    uint256 userBalance = IERC20(reserveCache.aTokenAddress).balanceOf(msg.sender);
    ValidationLogic.validateSetUseReserveAsCollateral(reserveCache, userBalance);
    if (useAsCollateral == userConfig.isUsingAsCollateral(reserve.id)) return;
    if (useAsCollateral) {
      require(
        ValidationLogic.validateUseAsCollateral(
          reservesData,
          reservesList,
          userConfig,
          reserveCache.reserveConfiguration
        ),
        Errors.USER_IN_ISOLATION_MODE_OR_LTV_ZERO
      );
      userConfig.setUsingAsCollateral(reserve.id, true);
      emit ReserveUsedAsCollateralEnabled(asset, msg.sender);
    } else {
      userConfig.setUsingAsCollateral(reserve.id, false);
      ValidationLogic.validateHFAndLtv(
        reservesData,
        reservesList,
        eModeCategories,
        userConfig,
        asset,
        msg.sender,
        reservesCount,
        priceOracle,
        userEModeCategory
      );
      emit ReserveUsedAsCollateralDisabled(asset, msg.sender);
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IFlashLoanReceiver} from '../../../misc/flashloan/interfaces/IFlashLoanReceiver.sol';
import {IFlashLoanSimpleReceiver} from '../../../misc/flashloan/interfaces/IFlashLoanSimpleReceiver.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {Errors} from '../helpers/Errors.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {BorrowLogic} from './BorrowLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
/**
 * @title FlashLoanLogic library
 * @author Aave
 * @notice Implements the logic for the flash loans
 */
library FlashLoanLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  // See `IPool` for descriptions
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );
  // Helper struct for internal variables used in the `executeFlashLoan` function
  struct FlashLoanLocalVars {
    IFlashLoanReceiver receiver;
    address currentAsset;
    uint256 currentAmount;
    uint256[] totalPremiums;
    uint256 flashloanPremiumTotal;
    uint256 flashloanPremiumToProtocol;
  }
  /**
   * @notice Implements the flashloan feature that allow users to access liquidity of the pool for one transaction
   * as long as the amount taken plus fee is returned or debt is opened.
   * @dev For authorized flashborrowers the fee is waived
   * @dev At the end of the transaction the pool will pull amount borrowed + fee from the receiver,
   * if the receiver have not approved the pool the transaction will revert.
   * @dev Emits the `FlashLoan()` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the flashloan function
   */
  function executeFlashLoan(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.FlashloanParams memory params
  ) external {
    // The usual action flow (cache -> updateState -> validation -> changeState -> updateRates)
    // is altered to (validation -> user payload -> cache -> updateState -> changeState -> updateRates) for flashloans.
    // This is done to protect against reentrance and rate manipulation within the user specified payload.
    ValidationLogic.validateFlashloan(reservesData, params.assets, params.amounts);
    FlashLoanLocalVars memory vars;
    vars.totalPremiums = new uint256[](params.assets.length);
    vars.receiver = IFlashLoanReceiver(params.receiverAddress);
    (vars.flashloanPremiumTotal, vars.flashloanPremiumToProtocol) = params.isAuthorizedFlashBorrower
      ? (0, 0)
      : (params.flashLoanPremiumTotal, params.flashLoanPremiumToProtocol);
    for (uint256 i = 0; i < params.assets.length; i++) {
      vars.currentAmount = params.amounts[i];
      vars.totalPremiums[i] = DataTypes.InterestRateMode(params.interestRateModes[i]) ==
        DataTypes.InterestRateMode.NONE
        ? vars.currentAmount.percentMul(vars.flashloanPremiumTotal)
        : 0;
      if (reservesData[params.assets[i]].configuration.getIsVirtualAccActive()) {
        reservesData[params.assets[i]].virtualUnderlyingBalance -= vars.currentAmount.toUint128();
      }
      IAToken(reservesData[params.assets[i]].aTokenAddress).transferUnderlyingTo(
        params.receiverAddress,
        vars.currentAmount
      );
    }
    require(
      vars.receiver.executeOperation(
        params.assets,
        params.amounts,
        vars.totalPremiums,
        msg.sender,
        params.params
      ),
      Errors.INVALID_FLASHLOAN_EXECUTOR_RETURN
    );
    for (uint256 i = 0; i < params.assets.length; i++) {
      vars.currentAsset = params.assets[i];
      vars.currentAmount = params.amounts[i];
      if (
        DataTypes.InterestRateMode(params.interestRateModes[i]) == DataTypes.InterestRateMode.NONE
      ) {
        _handleFlashLoanRepayment(
          reservesData[vars.currentAsset],
          DataTypes.FlashLoanRepaymentParams({
            asset: vars.currentAsset,
            receiverAddress: params.receiverAddress,
            amount: vars.currentAmount,
            totalPremium: vars.totalPremiums[i],
            flashLoanPremiumToProtocol: vars.flashloanPremiumToProtocol,
            referralCode: params.referralCode
          })
        );
      } else {
        // If the user chose to not return the funds, the system checks if there is enough collateral and
        // eventually opens a debt position
        BorrowLogic.executeBorrow(
          reservesData,
          reservesList,
          eModeCategories,
          userConfig,
          DataTypes.ExecuteBorrowParams({
            asset: vars.currentAsset,
            user: msg.sender,
            onBehalfOf: params.onBehalfOf,
            amount: vars.currentAmount,
            interestRateMode: DataTypes.InterestRateMode(params.interestRateModes[i]),
            referralCode: params.referralCode,
            releaseUnderlying: false,
            reservesCount: IPool(params.pool).getReservesCount(),
            oracle: IPoolAddressesProvider(params.addressesProvider).getPriceOracle(),
            userEModeCategory: IPool(params.pool).getUserEMode(params.onBehalfOf).toUint8(),
            priceOracleSentinel: IPoolAddressesProvider(params.addressesProvider)
              .getPriceOracleSentinel()
          })
        );
        // no premium is paid when taking on the flashloan as debt
        emit FlashLoan(
          params.receiverAddress,
          msg.sender,
          vars.currentAsset,
          vars.currentAmount,
          DataTypes.InterestRateMode(params.interestRateModes[i]),
          0,
          params.referralCode
        );
      }
    }
  }
  /**
   * @notice Implements the simple flashloan feature that allow users to access liquidity of ONE reserve for one
   * transaction as long as the amount taken plus fee is returned.
   * @dev Does not waive fee for approved flashborrowers nor allow taking on debt instead of repaying to save gas
   * @dev At the end of the transaction the pool will pull amount borrowed + fee from the receiver,
   * if the receiver have not approved the pool the transaction will revert.
   * @dev Emits the `FlashLoan()` event
   * @param reserve The state of the flashloaned reserve
   * @param params The additional parameters needed to execute the simple flashloan function
   */
  function executeFlashLoanSimple(
    DataTypes.ReserveData storage reserve,
    DataTypes.FlashloanSimpleParams memory params
  ) external {
    // The usual action flow (cache -> updateState -> validation -> changeState -> updateRates)
    // is altered to (validation -> user payload -> cache -> updateState -> changeState -> updateRates) for flashloans.
    // This is done to protect against reentrance and rate manipulation within the user specified payload.
    ValidationLogic.validateFlashloanSimple(reserve, params.amount);
    IFlashLoanSimpleReceiver receiver = IFlashLoanSimpleReceiver(params.receiverAddress);
    uint256 totalPremium = params.amount.percentMul(params.flashLoanPremiumTotal);
    if (reserve.configuration.getIsVirtualAccActive()) {
      reserve.virtualUnderlyingBalance -= params.amount.toUint128();
    }
    IAToken(reserve.aTokenAddress).transferUnderlyingTo(params.receiverAddress, params.amount);
    require(
      receiver.executeOperation(
        params.asset,
        params.amount,
        totalPremium,
        msg.sender,
        params.params
      ),
      Errors.INVALID_FLASHLOAN_EXECUTOR_RETURN
    );
    _handleFlashLoanRepayment(
      reserve,
      DataTypes.FlashLoanRepaymentParams({
        asset: params.asset,
        receiverAddress: params.receiverAddress,
        amount: params.amount,
        totalPremium: totalPremium,
        flashLoanPremiumToProtocol: params.flashLoanPremiumToProtocol,
        referralCode: params.referralCode
      })
    );
  }
  /**
   * @notice Handles repayment of flashloaned assets + premium
   * @dev Will pull the amount + premium from the receiver, so must have approved pool
   * @param reserve The state of the flashloaned reserve
   * @param params The additional parameters needed to execute the repayment function
   */
  function _handleFlashLoanRepayment(
    DataTypes.ReserveData storage reserve,
    DataTypes.FlashLoanRepaymentParams memory params
  ) internal {
    uint256 premiumToProtocol = params.totalPremium.percentMul(params.flashLoanPremiumToProtocol);
    uint256 premiumToLP = params.totalPremium - premiumToProtocol;
    uint256 amountPlusPremium = params.amount + params.totalPremium;
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    reserveCache.nextLiquidityIndex = reserve.cumulateToLiquidityIndex(
      IERC20(reserveCache.aTokenAddress).totalSupply() +
        uint256(reserve.accruedToTreasury).rayMul(reserveCache.nextLiquidityIndex),
      premiumToLP
    );
    reserve.accruedToTreasury += premiumToProtocol
      .rayDiv(reserveCache.nextLiquidityIndex)
      .toUint128();
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, params.asset, amountPlusPremium, 0);
    IERC20(params.asset).safeTransferFrom(
      params.receiverAddress,
      reserveCache.aTokenAddress,
      amountPlusPremium
    );
    IAToken(reserveCache.aTokenAddress).handleRepayment(
      params.receiverAddress,
      params.receiverAddress,
      amountPlusPremium
    );
    emit FlashLoan(
      params.receiverAddress,
      msg.sender,
      params.asset,
      params.amount,
      DataTypes.InterestRateMode.NONE,
      params.totalPremium,
      params.referralCode
    );
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {IsolationModeLogic} from './IsolationModeLogic.sol';
/**
 * @title BorrowLogic library
 * @author Aave
 * @notice Implements the base logic for all the actions related to borrowing
 */
library BorrowLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using SafeCast for uint256;
  // See `IPool` for descriptions
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  /**
   * @notice Implements the borrow feature. Borrowing allows users that provided collateral to draw liquidity from the
   * Aave protocol proportionally to their collateralization power. For isolated positions, it also increases the
   * isolated debt.
   * @dev  Emits the `Borrow()` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the borrow function
   */
  function executeBorrow(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteBorrowParams memory params
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    (
      bool isolationModeActive,
      address isolationModeCollateralAddress,
      uint256 isolationModeDebtCeiling
    ) = userConfig.getIsolationModeState(reservesData, reservesList);
    ValidationLogic.validateBorrow(
      reservesData,
      reservesList,
      eModeCategories,
      DataTypes.ValidateBorrowParams({
        reserveCache: reserveCache,
        userConfig: userConfig,
        asset: params.asset,
        userAddress: params.onBehalfOf,
        amount: params.amount,
        interestRateMode: params.interestRateMode,
        reservesCount: params.reservesCount,
        oracle: params.oracle,
        userEModeCategory: params.userEModeCategory,
        priceOracleSentinel: params.priceOracleSentinel,
        isolationModeActive: isolationModeActive,
        isolationModeCollateralAddress: isolationModeCollateralAddress,
        isolationModeDebtCeiling: isolationModeDebtCeiling
      })
    );
    bool isFirstBorrowing = false;
    (isFirstBorrowing, reserveCache.nextScaledVariableDebt) = IVariableDebtToken(
      reserveCache.variableDebtTokenAddress
    ).mint(params.user, params.onBehalfOf, params.amount, reserveCache.nextVariableBorrowIndex);
    if (isFirstBorrowing) {
      userConfig.setBorrowing(reserve.id, true);
    }
    if (isolationModeActive) {
      uint256 nextIsolationModeTotalDebt = reservesData[isolationModeCollateralAddress]
        .isolationModeTotalDebt += (params.amount /
        10 **
          (reserveCache.reserveConfiguration.getDecimals() -
            ReserveConfiguration.DEBT_CEILING_DECIMALS)).toUint128();
      emit IsolationModeTotalDebtUpdated(
        isolationModeCollateralAddress,
        nextIsolationModeTotalDebt
      );
    }
    reserve.updateInterestRatesAndVirtualBalance(
      reserveCache,
      params.asset,
      0,
      params.releaseUnderlying ? params.amount : 0
    );
    if (params.releaseUnderlying) {
      IAToken(reserveCache.aTokenAddress).transferUnderlyingTo(params.user, params.amount);
    }
    emit Borrow(
      params.asset,
      params.user,
      params.onBehalfOf,
      params.amount,
      DataTypes.InterestRateMode.VARIABLE,
      reserve.currentVariableBorrowRate,
      params.referralCode
    );
  }
  /**
   * @notice Implements the repay feature. Repaying transfers the underlying back to the aToken and clears the
   * equivalent amount of debt for the user by burning the corresponding debt token. For isolated positions, it also
   * reduces the isolated debt.
   * @dev  Emits the `Repay()` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the repay function
   * @return The actual amount being repaid
   */
  function executeRepay(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteRepayParams memory params
  ) external returns (uint256) {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    uint256 variableDebt = IERC20(reserveCache.variableDebtTokenAddress).balanceOf(
      params.onBehalfOf
    );
    ValidationLogic.validateRepay(
      reserveCache,
      params.amount,
      params.interestRateMode,
      params.onBehalfOf,
      variableDebt
    );
    uint256 paybackAmount = variableDebt;
    // Allows a user to repay with aTokens without leaving dust from interest.
    if (params.useATokens && params.amount == type(uint256).max) {
      params.amount = IAToken(reserveCache.aTokenAddress).balanceOf(msg.sender);
    }
    if (params.amount < paybackAmount) {
      paybackAmount = params.amount;
    }
    reserveCache.nextScaledVariableDebt = IVariableDebtToken(reserveCache.variableDebtTokenAddress)
      .burn(params.onBehalfOf, paybackAmount, reserveCache.nextVariableBorrowIndex);
    reserve.updateInterestRatesAndVirtualBalance(
      reserveCache,
      params.asset,
      params.useATokens ? 0 : paybackAmount,
      0
    );
    if (variableDebt - paybackAmount == 0) {
      userConfig.setBorrowing(reserve.id, false);
    }
    IsolationModeLogic.updateIsolatedDebtIfIsolated(
      reservesData,
      reservesList,
      userConfig,
      reserveCache,
      paybackAmount
    );
    if (params.useATokens) {
      IAToken(reserveCache.aTokenAddress).burn(
        msg.sender,
        reserveCache.aTokenAddress,
        paybackAmount,
        reserveCache.nextLiquidityIndex
      );
      // in case of aToken repayment the msg.sender must always repay on behalf of itself
      if (IAToken(reserveCache.aTokenAddress).scaledBalanceOf(msg.sender) == 0) {
        userConfig.setUsingAsCollateral(reserve.id, false);
        emit ReserveUsedAsCollateralDisabled(params.asset, msg.sender);
      }
    } else {
      IERC20(params.asset).safeTransferFrom(msg.sender, reserveCache.aTokenAddress, paybackAmount);
      IAToken(reserveCache.aTokenAddress).handleRepayment(
        msg.sender,
        params.onBehalfOf,
        paybackAmount
      );
    }
    emit Repay(params.asset, params.onBehalfOf, msg.sender, paybackAmount, params.useATokens);
    return paybackAmount;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts//IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {PercentageMath} from '../../libraries/math/PercentageMath.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {DataTypes} from '../../libraries/types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {GenericLogic} from './GenericLogic.sol';
import {IsolationModeLogic} from './IsolationModeLogic.sol';
import {EModeLogic} from './EModeLogic.sol';
import {UserConfiguration} from '../../libraries/configuration/UserConfiguration.sol';
import {ReserveConfiguration} from '../../libraries/configuration/ReserveConfiguration.sol';
import {EModeConfiguration} from '../../libraries/configuration/EModeConfiguration.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
/**
 * @title LiquidationLogic library
 * @author Aave
 * @notice Implements actions involving management of collateral in the protocol, the main one being the liquidations
 */
library LiquidationLogic {
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using GPv2SafeERC20 for IERC20;
  // See `IPool` for descriptions
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );
  /**
   * @dev Default percentage of borrower's debt to be repaid in a liquidation.
   * @dev Percentage applied when the users health factor is above `CLOSE_FACTOR_HF_THRESHOLD`
   * Expressed in bps, a value of 0.5e4 results in 50.00%
   */
  uint256 internal constant DEFAULT_LIQUIDATION_CLOSE_FACTOR = 0.5e4;
  /**
   * @dev Maximum percentage of borrower's debt to be repaid in a liquidation
   * @dev Percentage applied when the users health factor is below `CLOSE_FACTOR_HF_THRESHOLD`
   * Expressed in bps, a value of 1e4 results in 100.00%
   */
  uint256 public constant MAX_LIQUIDATION_CLOSE_FACTOR = 1e4;
  /**
   * @dev This constant represents below which health factor value it is possible to liquidate
   * an amount of debt corresponding to `MAX_LIQUIDATION_CLOSE_FACTOR`.
   * A value of 0.95e18 results in 0.95
   */
  uint256 public constant CLOSE_FACTOR_HF_THRESHOLD = 0.95e18;
  struct LiquidationCallLocalVars {
    uint256 userCollateralBalance;
    uint256 userTotalDebt;
    uint256 actualDebtToLiquidate;
    uint256 actualCollateralToLiquidate;
    uint256 liquidationBonus;
    uint256 healthFactor;
    uint256 liquidationProtocolFeeAmount;
    IAToken collateralAToken;
    DataTypes.ReserveCache debtReserveCache;
  }
  /**
   * @notice Function to liquidate a position if its Health Factor drops below 1. The caller (liquidator)
   * covers `debtToCover` amount of debt of the user getting liquidated, and receives
   * a proportional amount of the `collateralAsset` plus a bonus to cover market risk
   * @dev Emits the `LiquidationCall()` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param usersConfig The users configuration mapping that track the supplied/borrowed assets
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params The additional parameters needed to execute the liquidation function
   */
  function executeLiquidationCall(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(address => DataTypes.UserConfigurationMap) storage usersConfig,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.ExecuteLiquidationCallParams memory params
  ) external {
    LiquidationCallLocalVars memory vars;
    DataTypes.ReserveData storage collateralReserve = reservesData[params.collateralAsset];
    DataTypes.ReserveData storage debtReserve = reservesData[params.debtAsset];
    DataTypes.UserConfigurationMap storage userConfig = usersConfig[params.user];
    vars.debtReserveCache = debtReserve.cache();
    debtReserve.updateState(vars.debtReserveCache);
    (, , , , vars.healthFactor, ) = GenericLogic.calculateUserAccountData(
      reservesData,
      reservesList,
      eModeCategories,
      DataTypes.CalculateUserAccountDataParams({
        userConfig: userConfig,
        reservesCount: params.reservesCount,
        user: params.user,
        oracle: params.priceOracle,
        userEModeCategory: params.userEModeCategory
      })
    );
    (vars.userTotalDebt, vars.actualDebtToLiquidate) = _calculateDebt(
      vars.debtReserveCache,
      params,
      vars.healthFactor
    );
    ValidationLogic.validateLiquidationCall(
      userConfig,
      collateralReserve,
      debtReserve,
      DataTypes.ValidateLiquidationCallParams({
        debtReserveCache: vars.debtReserveCache,
        totalDebt: vars.userTotalDebt,
        healthFactor: vars.healthFactor,
        priceOracleSentinel: params.priceOracleSentinel
      })
    );
    vars.collateralAToken = IAToken(collateralReserve.aTokenAddress);
    if (
      params.userEModeCategory != 0 &&
      EModeConfiguration.isReserveEnabledOnBitmap(
        eModeCategories[params.userEModeCategory].collateralBitmap,
        collateralReserve.id
      )
    ) {
      vars.liquidationBonus = eModeCategories[params.userEModeCategory].liquidationBonus;
    } else {
      vars.liquidationBonus = collateralReserve.configuration.getLiquidationBonus();
    }
    vars.userCollateralBalance = vars.collateralAToken.balanceOf(params.user);
    (
      vars.actualCollateralToLiquidate,
      vars.actualDebtToLiquidate,
      vars.liquidationProtocolFeeAmount
    ) = _calculateAvailableCollateralToLiquidate(
      collateralReserve,
      vars.debtReserveCache,
      params.collateralAsset,
      params.debtAsset,
      vars.actualDebtToLiquidate,
      vars.userCollateralBalance,
      vars.liquidationBonus,
      IPriceOracleGetter(params.priceOracle)
    );
    if (vars.userTotalDebt == vars.actualDebtToLiquidate) {
      userConfig.setBorrowing(debtReserve.id, false);
    }
    // If the collateral being liquidated is equal to the user balance,
    // we set the currency as not being used as collateral anymore
    if (
      vars.actualCollateralToLiquidate + vars.liquidationProtocolFeeAmount ==
      vars.userCollateralBalance
    ) {
      userConfig.setUsingAsCollateral(collateralReserve.id, false);
      emit ReserveUsedAsCollateralDisabled(params.collateralAsset, params.user);
    }
    _burnDebtTokens(params, vars);
    debtReserve.updateInterestRatesAndVirtualBalance(
      vars.debtReserveCache,
      params.debtAsset,
      vars.actualDebtToLiquidate,
      0
    );
    IsolationModeLogic.updateIsolatedDebtIfIsolated(
      reservesData,
      reservesList,
      userConfig,
      vars.debtReserveCache,
      vars.actualDebtToLiquidate
    );
    if (params.receiveAToken) {
      _liquidateATokens(reservesData, reservesList, usersConfig, collateralReserve, params, vars);
    } else {
      _burnCollateralATokens(collateralReserve, params, vars);
    }
    // Transfer fee to treasury if it is non-zero
    if (vars.liquidationProtocolFeeAmount != 0) {
      uint256 liquidityIndex = collateralReserve.getNormalizedIncome();
      uint256 scaledDownLiquidationProtocolFee = vars.liquidationProtocolFeeAmount.rayDiv(
        liquidityIndex
      );
      uint256 scaledDownUserBalance = vars.collateralAToken.scaledBalanceOf(params.user);
      // To avoid trying to send more aTokens than available on balance, due to 1 wei imprecision
      if (scaledDownLiquidationProtocolFee > scaledDownUserBalance) {
        vars.liquidationProtocolFeeAmount = scaledDownUserBalance.rayMul(liquidityIndex);
      }
      vars.collateralAToken.transferOnLiquidation(
        params.user,
        vars.collateralAToken.RESERVE_TREASURY_ADDRESS(),
        vars.liquidationProtocolFeeAmount
      );
    }
    // Transfers the debt asset being repaid to the aToken, where the liquidity is kept
    IERC20(params.debtAsset).safeTransferFrom(
      msg.sender,
      vars.debtReserveCache.aTokenAddress,
      vars.actualDebtToLiquidate
    );
    IAToken(vars.debtReserveCache.aTokenAddress).handleRepayment(
      msg.sender,
      params.user,
      vars.actualDebtToLiquidate
    );
    emit LiquidationCall(
      params.collateralAsset,
      params.debtAsset,
      params.user,
      vars.actualDebtToLiquidate,
      vars.actualCollateralToLiquidate,
      msg.sender,
      params.receiveAToken
    );
  }
  /**
   * @notice Burns the collateral aTokens and transfers the underlying to the liquidator.
   * @dev   The function also updates the state and the interest rate of the collateral reserve.
   * @param collateralReserve The data of the collateral reserve
   * @param params The additional parameters needed to execute the liquidation function
   * @param vars The executeLiquidationCall() function local vars
   */
  function _burnCollateralATokens(
    DataTypes.ReserveData storage collateralReserve,
    DataTypes.ExecuteLiquidationCallParams memory params,
    LiquidationCallLocalVars memory vars
  ) internal {
    DataTypes.ReserveCache memory collateralReserveCache = collateralReserve.cache();
    collateralReserve.updateState(collateralReserveCache);
    collateralReserve.updateInterestRatesAndVirtualBalance(
      collateralReserveCache,
      params.collateralAsset,
      0,
      vars.actualCollateralToLiquidate
    );
    // Burn the equivalent amount of aToken, sending the underlying to the liquidator
    vars.collateralAToken.burn(
      params.user,
      msg.sender,
      vars.actualCollateralToLiquidate,
      collateralReserveCache.nextLiquidityIndex
    );
  }
  /**
   * @notice Liquidates the user aTokens by transferring them to the liquidator.
   * @dev   The function also checks the state of the liquidator and activates the aToken as collateral
   *        as in standard transfers if the isolation mode constraints are respected.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param usersConfig The users configuration mapping that track the supplied/borrowed assets
   * @param collateralReserve The data of the collateral reserve
   * @param params The additional parameters needed to execute the liquidation function
   * @param vars The executeLiquidationCall() function local vars
   */
  function _liquidateATokens(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(address => DataTypes.UserConfigurationMap) storage usersConfig,
    DataTypes.ReserveData storage collateralReserve,
    DataTypes.ExecuteLiquidationCallParams memory params,
    LiquidationCallLocalVars memory vars
  ) internal {
    uint256 liquidatorPreviousATokenBalance = IERC20(vars.collateralAToken).balanceOf(msg.sender);
    vars.collateralAToken.transferOnLiquidation(
      params.user,
      msg.sender,
      vars.actualCollateralToLiquidate
    );
    if (liquidatorPreviousATokenBalance == 0) {
      DataTypes.UserConfigurationMap storage liquidatorConfig = usersConfig[msg.sender];
      if (
        ValidationLogic.validateAutomaticUseAsCollateral(
          reservesData,
          reservesList,
          liquidatorConfig,
          collateralReserve.configuration,
          collateralReserve.aTokenAddress
        )
      ) {
        liquidatorConfig.setUsingAsCollateral(collateralReserve.id, true);
        emit ReserveUsedAsCollateralEnabled(params.collateralAsset, msg.sender);
      }
    }
  }
  /**
   * @notice Burns the debt tokens of the user up to the amount being repaid by the liquidator.
   * @dev The function alters the `debtReserveCache` state in `vars` to update the debt related data.
   * @param params The additional parameters needed to execute the liquidation function
   * @param vars the executeLiquidationCall() function local vars
   */
  function _burnDebtTokens(
    DataTypes.ExecuteLiquidationCallParams memory params,
    LiquidationCallLocalVars memory vars
  ) internal {
    vars.debtReserveCache.nextScaledVariableDebt = IVariableDebtToken(
      vars.debtReserveCache.variableDebtTokenAddress
    ).burn(params.user, vars.actualDebtToLiquidate, vars.debtReserveCache.nextVariableBorrowIndex);
  }
  /**
   * @notice Calculates the total debt of the user and the actual amount to liquidate depending on the health factor
   * and corresponding close factor.
   * @dev If the Health Factor is below CLOSE_FACTOR_HF_THRESHOLD, the close factor is increased to MAX_LIQUIDATION_CLOSE_FACTOR
   * @param debtReserveCache The reserve cache data object of the debt reserve
   * @param params The additional parameters needed to execute the liquidation function
   * @param healthFactor The health factor of the position
   * @return The total debt of the user
   * @return The actual debt to liquidate as a function of the closeFactor
   */
  function _calculateDebt(
    DataTypes.ReserveCache memory debtReserveCache,
    DataTypes.ExecuteLiquidationCallParams memory params,
    uint256 healthFactor
  ) internal view returns (uint256, uint256) {
    uint256 userVariableDebt = IERC20(debtReserveCache.variableDebtTokenAddress).balanceOf(
      params.user
    );
    uint256 closeFactor = healthFactor > CLOSE_FACTOR_HF_THRESHOLD
      ? DEFAULT_LIQUIDATION_CLOSE_FACTOR
      : MAX_LIQUIDATION_CLOSE_FACTOR;
    uint256 maxLiquidatableDebt = userVariableDebt.percentMul(closeFactor);
    uint256 actualDebtToLiquidate = params.debtToCover > maxLiquidatableDebt
      ? maxLiquidatableDebt
      : params.debtToCover;
    return (userVariableDebt, actualDebtToLiquidate);
  }
  struct AvailableCollateralToLiquidateLocalVars {
    uint256 collateralPrice;
    uint256 debtAssetPrice;
    uint256 maxCollateralToLiquidate;
    uint256 baseCollateral;
    uint256 bonusCollateral;
    uint256 debtAssetDecimals;
    uint256 collateralDecimals;
    uint256 collateralAssetUnit;
    uint256 debtAssetUnit;
    uint256 collateralAmount;
    uint256 debtAmountNeeded;
    uint256 liquidationProtocolFeePercentage;
    uint256 liquidationProtocolFee;
  }
  /**
   * @notice Calculates how much of a specific collateral can be liquidated, given
   * a certain amount of debt asset.
   * @dev This function needs to be called after all the checks to validate the liquidation have been performed,
   *   otherwise it might fail.
   * @param collateralReserve The data of the collateral reserve
   * @param debtReserveCache The cached data of the debt reserve
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param userCollateralBalance The collateral balance for the specific `collateralAsset` of the user being liquidated
   * @param liquidationBonus The collateral bonus percentage to receive as result of the liquidation
   * @return The maximum amount that is possible to liquidate given all the liquidation constraints (user balance, close factor)
   * @return The amount to repay with the liquidation
   * @return The fee taken from the liquidation bonus amount to be paid to the protocol
   */
  function _calculateAvailableCollateralToLiquidate(
    DataTypes.ReserveData storage collateralReserve,
    DataTypes.ReserveCache memory debtReserveCache,
    address collateralAsset,
    address debtAsset,
    uint256 debtToCover,
    uint256 userCollateralBalance,
    uint256 liquidationBonus,
    IPriceOracleGetter oracle
  ) internal view returns (uint256, uint256, uint256) {
    AvailableCollateralToLiquidateLocalVars memory vars;
    vars.collateralPrice = oracle.getAssetPrice(collateralAsset);
    vars.debtAssetPrice = oracle.getAssetPrice(debtAsset);
    vars.collateralDecimals = collateralReserve.configuration.getDecimals();
    vars.debtAssetDecimals = debtReserveCache.reserveConfiguration.getDecimals();
    unchecked {
      vars.collateralAssetUnit = 10 ** vars.collateralDecimals;
      vars.debtAssetUnit = 10 ** vars.debtAssetDecimals;
    }
    vars.liquidationProtocolFeePercentage = collateralReserve
      .configuration
      .getLiquidationProtocolFee();
    // This is the base collateral to liquidate based on the given debt to cover
    vars.baseCollateral =
      ((vars.debtAssetPrice * debtToCover * vars.collateralAssetUnit)) /
      (vars.collateralPrice * vars.debtAssetUnit);
    vars.maxCollateralToLiquidate = vars.baseCollateral.percentMul(liquidationBonus);
    if (vars.maxCollateralToLiquidate > userCollateralBalance) {
      vars.collateralAmount = userCollateralBalance;
      vars.debtAmountNeeded = ((vars.collateralPrice * vars.collateralAmount * vars.debtAssetUnit) /
        (vars.debtAssetPrice * vars.collateralAssetUnit)).percentDiv(liquidationBonus);
    } else {
      vars.collateralAmount = vars.maxCollateralToLiquidate;
      vars.debtAmountNeeded = debtToCover;
    }
    if (vars.liquidationProtocolFeePercentage != 0) {
      vars.bonusCollateral =
        vars.collateralAmount -
        vars.collateralAmount.percentDiv(liquidationBonus);
      vars.liquidationProtocolFee = vars.bonusCollateral.percentMul(
        vars.liquidationProtocolFeePercentage
      );
      return (
        vars.collateralAmount - vars.liquidationProtocolFee,
        vars.debtAmountNeeded,
        vars.liquidationProtocolFee
      );
    } else {
      return (vars.collateralAmount, vars.debtAmountNeeded, 0);
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 __deprecatedStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }
  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused
    uint256 data;
  }
  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }
  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }
  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }
  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }
  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }
  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }
  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }
  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }
  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }
  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }
  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }
  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }
  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }
  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }
  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }
  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }
  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }
  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {Errors} from '../helpers/Errors.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
library BridgeLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  // See `IPool` for descriptions
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
  /**
   * @notice Mint unbacked aTokens to a user and updates the unbacked for the reserve.
   * @dev Essentially a supply without transferring the underlying.
   * @dev Emits the `MintUnbacked` event
   * @dev Emits the `ReserveUsedAsCollateralEnabled` if asset is set as collateral
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param asset The address of the underlying asset to mint aTokens of
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function executeMintUnbacked(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    ValidationLogic.validateSupply(reserveCache, reserve, amount, onBehalfOf);
    uint256 unbackedMintCap = reserveCache.reserveConfiguration.getUnbackedMintCap();
    uint256 reserveDecimals = reserveCache.reserveConfiguration.getDecimals();
    uint256 unbacked = reserve.unbacked += amount.toUint128();
    require(
      unbacked <= unbackedMintCap * (10 ** reserveDecimals),
      Errors.UNBACKED_MINT_CAP_EXCEEDED
    );
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, asset, 0, 0);
    bool isFirstSupply = IAToken(reserveCache.aTokenAddress).mint(
      msg.sender,
      onBehalfOf,
      amount,
      reserveCache.nextLiquidityIndex
    );
    if (isFirstSupply) {
      if (
        ValidationLogic.validateAutomaticUseAsCollateral(
          reservesData,
          reservesList,
          userConfig,
          reserveCache.reserveConfiguration,
          reserveCache.aTokenAddress
        )
      ) {
        userConfig.setUsingAsCollateral(reserve.id, true);
        emit ReserveUsedAsCollateralEnabled(asset, onBehalfOf);
      }
    }
    emit MintUnbacked(asset, msg.sender, onBehalfOf, amount, referralCode);
  }
  /**
   * @notice Back the current unbacked with `amount` and pay `fee`.
   * @dev It is not possible to back more than the existing unbacked amount of the reserve
   * @dev Emits the `BackUnbacked` event
   * @param reserve The reserve to back unbacked for
   * @param asset The address of the underlying asset to repay
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @param protocolFeeBps The fraction of fees in basis points paid to the protocol
   * @return The backed amount
   */
  function executeBackUnbacked(
    DataTypes.ReserveData storage reserve,
    address asset,
    uint256 amount,
    uint256 fee,
    uint256 protocolFeeBps
  ) external returns (uint256) {
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    uint256 backingAmount = (amount < reserve.unbacked) ? amount : reserve.unbacked;
    uint256 feeToProtocol = fee.percentMul(protocolFeeBps);
    uint256 feeToLP = fee - feeToProtocol;
    uint256 added = backingAmount + fee;
    reserveCache.nextLiquidityIndex = reserve.cumulateToLiquidityIndex(
      IERC20(reserveCache.aTokenAddress).totalSupply() +
        uint256(reserve.accruedToTreasury).rayMul(reserveCache.nextLiquidityIndex),
      feeToLP
    );
    reserve.accruedToTreasury += feeToProtocol.rayDiv(reserveCache.nextLiquidityIndex).toUint128();
    reserve.unbacked -= backingAmount.toUint128();
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, asset, added, 0);
    IERC20(asset).safeTransferFrom(msg.sender, reserveCache.aTokenAddress, added);
    emit BackUnbacked(asset, msg.sender, backingAmount, fee);
    return backingAmount;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
/**
 * @title IERC20WithPermit
 * @author Aave
 * @notice Interface for the permit function (EIP-2612)
 */
interface IERC20WithPermit is IERC20 {
  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 2 for Variable, 1 is deprecated (changed on v3.2.0)
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan,
   *        1 for Stable (Deprecated on v3.2.0), 2 for Variable
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );
  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate @note deprecated on v3.2.0
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);
  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);
  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the VariableDebtToken
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 variable debt tokens
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;
  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);
  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);
  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode DEPRECATED in v3.2.0
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);
  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Deprecated on v3.2.0
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using 2 on `modes`
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );
  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;
  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev Does not reset eMode flags, which must be considered when reusing the same reserve id for a different reserve.
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;
  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;
  /**
   * @notice Accumulates interest to all indexes of the reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncIndexesState(address asset) external;
  /**
   * @notice Updates interest rates on the reserve data
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncRatesState(address asset) external;
  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;
  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);
  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);
  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);
  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveDataLegacy memory);
  /**
   * @notice Returns the state and configuration of the reserve, including extra data included with Aave v3.1
   * @dev DEPRECATED use independent getters instead (getReserveData, getLiquidationGracePeriod)
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve with virtual accounting
   */
  function getReserveDataExtended(
    address asset
  ) external view returns (DataTypes.ReserveData memory);
  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint128);
  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;
  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);
  /**
   * @notice Returns the number of initialized reserves
   * @dev It includes dropped reserves
   * @return The count
   */
  function getReservesCount() external view returns (uint256);
  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);
  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;
  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;
  /**
   * @notice Configures a new or alters an existing collateral configuration of an eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(
    uint8 id,
    DataTypes.EModeCategoryBaseConfiguration memory config
  ) external;
  /**
   * @notice Replaces the current eMode collateralBitmap.
   * @param id The id of the category
   * @param collateralBitmap The collateralBitmap of the category
   */
  function configureEModeCategoryCollateralBitmap(uint8 id, uint128 collateralBitmap) external;
  /**
   * @notice Replaces the current eMode borrowableBitmap.
   * @param id The id of the category
   * @param borrowableBitmap The borrowableBitmap of the category
   */
  function configureEModeCategoryBorrowableBitmap(uint8 id, uint128 borrowableBitmap) external;
  /**
   * @notice Returns the data of an eMode category
   * @dev DEPRECATED use independent getters instead
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(
    uint8 id
  ) external view returns (DataTypes.EModeCategoryLegacy memory);
  /**
   * @notice Returns the label of an eMode category
   * @param id The id of the category
   * @return The label of the category
   */
  function getEModeCategoryLabel(uint8 id) external view returns (string memory);
  /**
   * @notice Returns the collateral config of an eMode category
   * @param id The id of the category
   * @return The ltv,lt,lb of the category
   */
  function getEModeCategoryCollateralConfig(
    uint8 id
  ) external view returns (DataTypes.CollateralConfig memory);
  /**
   * @notice Returns the collateralBitmap of an eMode category
   * @param id The id of the category
   * @return The collateralBitmap of the category
   */
  function getEModeCategoryCollateralBitmap(uint8 id) external view returns (uint128);
  /**
   * @notice Returns the borrowableBitmap of an eMode category
   * @param id The id of the category
   * @return The borrowableBitmap of the category
   */
  function getEModeCategoryBorrowableBitmap(uint8 id) external view returns (uint128);
  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;
  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);
  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;
  /**
   * @notice Sets the liquidation grace period of the given asset
   * @dev To enable a liquidation grace period, a timestamp in the future should be set,
   *      To disable a liquidation grace period, any timestamp in the past works, like 0
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   **/
  function setLiquidationGracePeriod(address asset, uint40 until) external;
  /**
   * @notice Returns the liquidation grace period of the given asset
   * @param asset The address of the underlying asset
   * @return Timestamp when the liquidation grace period will end
   **/
  function getLiquidationGracePeriod(address asset) external returns (uint40);
  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);
  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
  /**
   * @notice Gets the address of the external FlashLoanLogic
   */
  function getFlashLoanLogic() external view returns (address);
  /**
   * @notice Gets the address of the external BorrowLogic
   */
  function getBorrowLogic() external view returns (address);
  /**
   * @notice Gets the address of the external BridgeLogic
   */
  function getBridgeLogic() external view returns (address);
  /**
   * @notice Gets the address of the external EModeLogic
   */
  function getEModeLogic() external view returns (address);
  /**
   * @notice Gets the address of the external LiquidationLogic
   */
  function getLiquidationLogic() external view returns (address);
  /**
   * @notice Gets the address of the external PoolLogic
   */
  function getPoolLogic() external view returns (address);
  /**
   * @notice Gets the address of the external SupplyLogic
   */
  function getSupplyLogic() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;
  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;
  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;
  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;
  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;
  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;
  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;
  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;
  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;
  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);
  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;
  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;
  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);
  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;
  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;
  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {UserConfiguration} from '../libraries/configuration/UserConfiguration.sol';
import {ReserveConfiguration} from '../libraries/configuration/ReserveConfiguration.sol';
import {ReserveLogic} from '../libraries/logic/ReserveLogic.sol';
import {DataTypes} from '../libraries/types/DataTypes.sol';
/**
 * @title PoolStorage
 * @author Aave
 * @notice Contract used as storage of the Pool contract.
 * @dev It defines the storage layout of the Pool contract.
 */
contract PoolStorage {
  using ReserveLogic for DataTypes.ReserveData;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  // Map of reserves and their data (underlyingAssetOfReserve => reserveData)
  mapping(address => DataTypes.ReserveData) internal _reserves;
  // Map of users address and their configuration data (userAddress => userConfiguration)
  mapping(address => DataTypes.UserConfigurationMap) internal _usersConfig;
  // List of reserves as a map (reserveId => reserve).
  // It is structured as a mapping for gas savings reasons, using the reserve id as index
  mapping(uint256 => address) internal _reservesList;
  // List of eMode categories as a map (eModeCategoryId => eModeCategory).
  // It is structured as a mapping for gas savings reasons, using the eModeCategoryId as index
  mapping(uint8 => DataTypes.EModeCategory) internal _eModeCategories;
  // Map of users address and their eMode category (userAddress => eModeCategoryId)
  mapping(address => uint8) internal _usersEModeCategory;
  // Fee of the protocol bridge, expressed in bps
  uint256 internal _bridgeProtocolFee;
  // Total FlashLoan Premium, expressed in bps
  uint128 internal _flashLoanPremiumTotal;
  // FlashLoan premium paid to protocol treasury, expressed in bps
  uint128 internal _flashLoanPremiumToProtocol;
  // DEPRECATED on v3.2.0
  uint64 internal __DEPRECATED_maxStableRateBorrowSizePercent;
  // Maximum number of active reserves there have been in the protocol. It is the upper bound of the reserves list
  uint16 internal _reservesCount;
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity ^0.8.10;
import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';
/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    bytes4 selector_ = token.transfer.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }
  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    bytes4 selector_ = token.transferFrom.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }
  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\\x08\\xc3\\x79\\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }
      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }
        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())
        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize, which returns 0 for contracts in
    // construction, since the code is only stored at the end of the
    // constructor execution.
    uint256 size;
    assembly {
      size := extcodesize(account)
    }
    return size > 0;
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }
  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCall(target, data, 'Address: low-level call failed');
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
  }
  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, 'Address: insufficient balance for call');
    require(isContract(target), 'Address: call to non-contract');
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResult(success, returndata, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data
  ) internal view returns (bytes memory) {
    return functionStaticCall(target, data, 'Address: low-level static call failed');
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    require(isContract(target), 'Address: static call to non-contract');
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(isContract(target), 'Address: delegate call to non-contract');
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }
  /**
   * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      // Look for revert reason and bubble it up if present
      if (returndata.length > 0) {
        // The easiest way to bubble the revert reason is using memory via assembly
        assembly {
          let returndata_size := mload(returndata)
          revert(add(32, returndata), returndata_size)
        }
      } else {
        revert(errorMessage);
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);
  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;
  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;
  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;
  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;
  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;
  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);
  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);
  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;
  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;
  uint256 internal constant WAD_RAY_RATIO = 1e9;
  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }
  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }
  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }
  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }
  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }
  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)
      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {Address} from '../../../dependencies/openzeppelin/contracts/Address.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {IPriceOracleSentinel} from '../../../interfaces/IPriceOracleSentinel.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IAccessControl} from '../../../dependencies/openzeppelin/contracts/IAccessControl.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {EModeConfiguration} from '../configuration/EModeConfiguration.sol';
import {Errors} from '../helpers/Errors.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {GenericLogic} from './GenericLogic.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IncentivizedERC20} from '../../tokenization/base/IncentivizedERC20.sol';
/**
 * @title ReserveLogic library
 * @author Aave
 * @notice Implements functions to validate the different actions of the protocol
 */
library ValidationLogic {
  using ReserveLogic for DataTypes.ReserveData;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using Address for address;
  // Factor to apply to "only-variable-debt" liquidity rate to get threshold for rebalancing, expressed in bps
  // A value of 0.9e4 results in 90%
  uint256 public constant REBALANCE_UP_LIQUIDITY_RATE_THRESHOLD = 0.9e4;
  // Minimum health factor allowed under any circumstance
  // A value of 0.95e18 results in 0.95
  uint256 public constant MINIMUM_HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 0.95e18;
  /**
   * @dev Minimum health factor to consider a user position healthy
   * A value of 1e18 results in 1
   */
  uint256 public constant HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 1e18;
  /**
   * @dev Role identifier for the role allowed to supply isolated reserves as collateral
   */
  bytes32 public constant ISOLATED_COLLATERAL_SUPPLIER_ROLE =
    keccak256('ISOLATED_COLLATERAL_SUPPLIER');
  /**
   * @notice Validates a supply action.
   * @param reserveCache The cached data of the reserve
   * @param amount The amount to be supplied
   */
  function validateSupply(
    DataTypes.ReserveCache memory reserveCache,
    DataTypes.ReserveData storage reserve,
    uint256 amount,
    address onBehalfOf
  ) internal view {
    require(amount != 0, Errors.INVALID_AMOUNT);
    (bool isActive, bool isFrozen, , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
    require(!isFrozen, Errors.RESERVE_FROZEN);
    require(onBehalfOf != reserveCache.aTokenAddress, Errors.SUPPLY_TO_ATOKEN);
    uint256 supplyCap = reserveCache.reserveConfiguration.getSupplyCap();
    require(
      supplyCap == 0 ||
        ((IAToken(reserveCache.aTokenAddress).scaledTotalSupply() +
          uint256(reserve.accruedToTreasury)).rayMul(reserveCache.nextLiquidityIndex) + amount) <=
        supplyCap * (10 ** reserveCache.reserveConfiguration.getDecimals()),
      Errors.SUPPLY_CAP_EXCEEDED
    );
  }
  /**
   * @notice Validates a withdraw action.
   * @param reserveCache The cached data of the reserve
   * @param amount The amount to be withdrawn
   * @param userBalance The balance of the user
   */
  function validateWithdraw(
    DataTypes.ReserveCache memory reserveCache,
    uint256 amount,
    uint256 userBalance
  ) internal pure {
    require(amount != 0, Errors.INVALID_AMOUNT);
    require(amount <= userBalance, Errors.NOT_ENOUGH_AVAILABLE_USER_BALANCE);
    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
  }
  struct ValidateBorrowLocalVars {
    uint256 currentLtv;
    uint256 collateralNeededInBaseCurrency;
    uint256 userCollateralInBaseCurrency;
    uint256 userDebtInBaseCurrency;
    uint256 availableLiquidity;
    uint256 healthFactor;
    uint256 totalDebt;
    uint256 totalSupplyVariableDebt;
    uint256 reserveDecimals;
    uint256 borrowCap;
    uint256 amountInBaseCurrency;
    uint256 assetUnit;
    address siloedBorrowingAddress;
    bool isActive;
    bool isFrozen;
    bool isPaused;
    bool borrowingEnabled;
    bool siloedBorrowingEnabled;
  }
  /**
   * @notice Validates a borrow action.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional params needed for the validation
   */
  function validateBorrow(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.ValidateBorrowParams memory params
  ) internal view {
    require(params.amount != 0, Errors.INVALID_AMOUNT);
    ValidateBorrowLocalVars memory vars;
    (vars.isActive, vars.isFrozen, vars.borrowingEnabled, vars.isPaused) = params
      .reserveCache
      .reserveConfiguration
      .getFlags();
    require(vars.isActive, Errors.RESERVE_INACTIVE);
    require(!vars.isPaused, Errors.RESERVE_PAUSED);
    require(!vars.isFrozen, Errors.RESERVE_FROZEN);
    require(vars.borrowingEnabled, Errors.BORROWING_NOT_ENABLED);
    require(
      !params.reserveCache.reserveConfiguration.getIsVirtualAccActive() ||
        IERC20(params.reserveCache.aTokenAddress).totalSupply() >= params.amount,
      Errors.INVALID_AMOUNT
    );
    require(
      params.priceOracleSentinel == address(0) ||
        IPriceOracleSentinel(params.priceOracleSentinel).isBorrowAllowed(),
      Errors.PRICE_ORACLE_SENTINEL_CHECK_FAILED
    );
    //validate interest rate mode
    require(
      params.interestRateMode == DataTypes.InterestRateMode.VARIABLE,
      Errors.INVALID_INTEREST_RATE_MODE_SELECTED
    );
    vars.reserveDecimals = params.reserveCache.reserveConfiguration.getDecimals();
    vars.borrowCap = params.reserveCache.reserveConfiguration.getBorrowCap();
    unchecked {
      vars.assetUnit = 10 ** vars.reserveDecimals;
    }
    if (vars.borrowCap != 0) {
      vars.totalSupplyVariableDebt = params.reserveCache.currScaledVariableDebt.rayMul(
        params.reserveCache.nextVariableBorrowIndex
      );
      vars.totalDebt = vars.totalSupplyVariableDebt + params.amount;
      unchecked {
        require(vars.totalDebt <= vars.borrowCap * vars.assetUnit, Errors.BORROW_CAP_EXCEEDED);
      }
    }
    if (params.isolationModeActive) {
      // check that the asset being borrowed is borrowable in isolation mode AND
      // the total exposure is no bigger than the collateral debt ceiling
      require(
        params.reserveCache.reserveConfiguration.getBorrowableInIsolation(),
        Errors.ASSET_NOT_BORROWABLE_IN_ISOLATION
      );
      require(
        reservesData[params.isolationModeCollateralAddress].isolationModeTotalDebt +
          (params.amount /
            10 ** (vars.reserveDecimals - ReserveConfiguration.DEBT_CEILING_DECIMALS))
            .toUint128() <=
          params.isolationModeDebtCeiling,
        Errors.DEBT_CEILING_EXCEEDED
      );
    }
    if (params.userEModeCategory != 0) {
      require(
        EModeConfiguration.isReserveEnabledOnBitmap(
          eModeCategories[params.userEModeCategory].borrowableBitmap,
          reservesData[params.asset].id
        ),
        Errors.NOT_BORROWABLE_IN_EMODE
      );
    }
    (
      vars.userCollateralInBaseCurrency,
      vars.userDebtInBaseCurrency,
      vars.currentLtv,
      ,
      vars.healthFactor,
    ) = GenericLogic.calculateUserAccountData(
      reservesData,
      reservesList,
      eModeCategories,
      DataTypes.CalculateUserAccountDataParams({
        userConfig: params.userConfig,
        reservesCount: params.reservesCount,
        user: params.userAddress,
        oracle: params.oracle,
        userEModeCategory: params.userEModeCategory
      })
    );
    require(vars.userCollateralInBaseCurrency != 0, Errors.COLLATERAL_BALANCE_IS_ZERO);
    require(vars.currentLtv != 0, Errors.LTV_VALIDATION_FAILED);
    require(
      vars.healthFactor > HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
    );
    vars.amountInBaseCurrency =
      IPriceOracleGetter(params.oracle).getAssetPrice(params.asset) *
      params.amount;
    unchecked {
      vars.amountInBaseCurrency /= vars.assetUnit;
    }
    //add the current already borrowed amount to the amount requested to calculate the total collateral needed.
    vars.collateralNeededInBaseCurrency = (vars.userDebtInBaseCurrency + vars.amountInBaseCurrency)
      .percentDiv(vars.currentLtv); //LTV is calculated in percentage
    require(
      vars.collateralNeededInBaseCurrency <= vars.userCollateralInBaseCurrency,
      Errors.COLLATERAL_CANNOT_COVER_NEW_BORROW
    );
    if (params.userConfig.isBorrowingAny()) {
      (vars.siloedBorrowingEnabled, vars.siloedBorrowingAddress) = params
        .userConfig
        .getSiloedBorrowingState(reservesData, reservesList);
      if (vars.siloedBorrowingEnabled) {
        require(vars.siloedBorrowingAddress == params.asset, Errors.SILOED_BORROWING_VIOLATION);
      } else {
        require(
          !params.reserveCache.reserveConfiguration.getSiloedBorrowing(),
          Errors.SILOED_BORROWING_VIOLATION
        );
      }
    }
  }
  /**
   * @notice Validates a repay action.
   * @param reserveCache The cached data of the reserve
   * @param amountSent The amount sent for the repayment. Can be an actual value or uint(-1)
   * @param onBehalfOf The address of the user msg.sender is repaying for
   * @param debt The borrow balance of the user
   */
  function validateRepay(
    DataTypes.ReserveCache memory reserveCache,
    uint256 amountSent,
    DataTypes.InterestRateMode interestRateMode,
    address onBehalfOf,
    uint256 debt
  ) internal view {
    require(amountSent != 0, Errors.INVALID_AMOUNT);
    require(
      interestRateMode == DataTypes.InterestRateMode.VARIABLE,
      Errors.INVALID_INTEREST_RATE_MODE_SELECTED
    );
    require(
      amountSent != type(uint256).max || msg.sender == onBehalfOf,
      Errors.NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF
    );
    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
    require(debt != 0, Errors.NO_DEBT_OF_SELECTED_TYPE);
  }
  /**
   * @notice Validates the action of setting an asset as collateral.
   * @param reserveCache The cached data of the reserve
   * @param userBalance The balance of the user
   */
  function validateSetUseReserveAsCollateral(
    DataTypes.ReserveCache memory reserveCache,
    uint256 userBalance
  ) internal pure {
    require(userBalance != 0, Errors.UNDERLYING_BALANCE_ZERO);
    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
  }
  /**
   * @notice Validates a flashloan action.
   * @param reservesData The state of all the reserves
   * @param assets The assets being flash-borrowed
   * @param amounts The amounts for each asset being borrowed
   */
  function validateFlashloan(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    address[] memory assets,
    uint256[] memory amounts
  ) internal view {
    require(assets.length == amounts.length, Errors.INCONSISTENT_FLASHLOAN_PARAMS);
    for (uint256 i = 0; i < assets.length; i++) {
      for (uint256 j = i + 1; j < assets.length; j++) {
        require(assets[i] != assets[j], Errors.INCONSISTENT_FLASHLOAN_PARAMS);
      }
      validateFlashloanSimple(reservesData[assets[i]], amounts[i]);
    }
  }
  /**
   * @notice Validates a flashloan action.
   * @param reserve The state of the reserve
   */
  function validateFlashloanSimple(
    DataTypes.ReserveData storage reserve,
    uint256 amount
  ) internal view {
    DataTypes.ReserveConfigurationMap memory configuration = reserve.configuration;
    require(!configuration.getPaused(), Errors.RESERVE_PAUSED);
    require(configuration.getActive(), Errors.RESERVE_INACTIVE);
    require(configuration.getFlashLoanEnabled(), Errors.FLASHLOAN_DISABLED);
    require(
      !configuration.getIsVirtualAccActive() ||
        IERC20(reserve.aTokenAddress).totalSupply() >= amount,
      Errors.INVALID_AMOUNT
    );
  }
  struct ValidateLiquidationCallLocalVars {
    bool collateralReserveActive;
    bool collateralReservePaused;
    bool principalReserveActive;
    bool principalReservePaused;
    bool isCollateralEnabled;
  }
  /**
   * @notice Validates the liquidation action.
   * @param userConfig The user configuration mapping
   * @param collateralReserve The reserve data of the collateral
   * @param debtReserve The reserve data of the debt
   * @param params Additional parameters needed for the validation
   */
  function validateLiquidationCall(
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveData storage collateralReserve,
    DataTypes.ReserveData storage debtReserve,
    DataTypes.ValidateLiquidationCallParams memory params
  ) internal view {
    ValidateLiquidationCallLocalVars memory vars;
    (vars.collateralReserveActive, , , vars.collateralReservePaused) = collateralReserve
      .configuration
      .getFlags();
    (vars.principalReserveActive, , , vars.principalReservePaused) = params
      .debtReserveCache
      .reserveConfiguration
      .getFlags();
    require(vars.collateralReserveActive && vars.principalReserveActive, Errors.RESERVE_INACTIVE);
    require(!vars.collateralReservePaused && !vars.principalReservePaused, Errors.RESERVE_PAUSED);
    require(
      params.priceOracleSentinel == address(0) ||
        params.healthFactor < MINIMUM_HEALTH_FACTOR_LIQUIDATION_THRESHOLD ||
        IPriceOracleSentinel(params.priceOracleSentinel).isLiquidationAllowed(),
      Errors.PRICE_ORACLE_SENTINEL_CHECK_FAILED
    );
    require(
      collateralReserve.liquidationGracePeriodUntil < uint40(block.timestamp) &&
        debtReserve.liquidationGracePeriodUntil < uint40(block.timestamp),
      Errors.LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED
    );
    require(
      params.healthFactor < HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_NOT_BELOW_THRESHOLD
    );
    vars.isCollateralEnabled =
      collateralReserve.configuration.getLiquidationThreshold() != 0 &&
      userConfig.isUsingAsCollateral(collateralReserve.id);
    //if collateral isn't enabled as collateral by user, it cannot be liquidated
    require(vars.isCollateralEnabled, Errors.COLLATERAL_CANNOT_BE_LIQUIDATED);
    require(params.totalDebt != 0, Errors.SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER);
  }
  /**
   * @notice Validates the health factor of a user.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The state of the user for the specific reserve
   * @param user The user to validate health factor of
   * @param userEModeCategory The users active efficiency mode category
   * @param reservesCount The number of available reserves
   * @param oracle The price oracle
   */
  function validateHealthFactor(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    address user,
    uint8 userEModeCategory,
    uint256 reservesCount,
    address oracle
  ) internal view returns (uint256, bool) {
    (, , , , uint256 healthFactor, bool hasZeroLtvCollateral) = GenericLogic
      .calculateUserAccountData(
        reservesData,
        reservesList,
        eModeCategories,
        DataTypes.CalculateUserAccountDataParams({
          userConfig: userConfig,
          reservesCount: reservesCount,
          user: user,
          oracle: oracle,
          userEModeCategory: userEModeCategory
        })
      );
    require(
      healthFactor >= HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
    );
    return (healthFactor, hasZeroLtvCollateral);
  }
  /**
   * @notice Validates the health factor of a user and the ltv of the asset being withdrawn.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The state of the user for the specific reserve
   * @param asset The asset for which the ltv will be validated
   * @param from The user from which the aTokens are being transferred
   * @param reservesCount The number of available reserves
   * @param oracle The price oracle
   * @param userEModeCategory The users active efficiency mode category
   */
  function validateHFAndLtv(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    address asset,
    address from,
    uint256 reservesCount,
    address oracle,
    uint8 userEModeCategory
  ) internal view {
    DataTypes.ReserveData memory reserve = reservesData[asset];
    (, bool hasZeroLtvCollateral) = validateHealthFactor(
      reservesData,
      reservesList,
      eModeCategories,
      userConfig,
      from,
      userEModeCategory,
      reservesCount,
      oracle
    );
    require(
      !hasZeroLtvCollateral || reserve.configuration.getLtv() == 0,
      Errors.LTV_VALIDATION_FAILED
    );
  }
  /**
   * @notice Validates a transfer action.
   * @param reserve The reserve object
   */
  function validateTransfer(DataTypes.ReserveData storage reserve) internal view {
    require(!reserve.configuration.getPaused(), Errors.RESERVE_PAUSED);
  }
  /**
   * @notice Validates a drop reserve action.
   * @param reservesList The addresses of all the active reserves
   * @param reserve The reserve object
   * @param asset The address of the reserve's underlying asset
   */
  function validateDropReserve(
    mapping(uint256 => address) storage reservesList,
    DataTypes.ReserveData storage reserve,
    address asset
  ) internal view {
    require(asset != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    require(reserve.id != 0 || reservesList[0] == asset, Errors.ASSET_NOT_LISTED);
    require(
      IERC20(reserve.variableDebtTokenAddress).totalSupply() == 0,
      Errors.VARIABLE_DEBT_SUPPLY_NOT_ZERO
    );
    require(
      IERC20(reserve.aTokenAddress).totalSupply() == 0 && reserve.accruedToTreasury == 0,
      Errors.UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO
    );
  }
  /**
   * @notice Validates the action of setting efficiency mode.
   * @param eModeCategories a mapping storing configurations for all efficiency mode categories
   * @param userConfig the user configuration
   * @param reservesCount The total number of valid reserves
   * @param categoryId The id of the category
   */
  function validateSetUserEMode(
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    uint256 reservesCount,
    uint8 categoryId
  ) internal view {
    DataTypes.EModeCategory storage eModeCategory = eModeCategories[categoryId];
    // category is invalid if the liq threshold is not set
    require(
      categoryId == 0 || eModeCategory.liquidationThreshold != 0,
      Errors.INCONSISTENT_EMODE_CATEGORY
    );
    // eMode can always be enabled if the user hasn't supplied anything
    if (userConfig.isEmpty()) {
      return;
    }
    // if user is trying to set another category than default we require that
    // either the user is not borrowing, or it's borrowing assets of categoryId
    if (categoryId != 0) {
      unchecked {
        for (uint256 i = 0; i < reservesCount; i++) {
          if (userConfig.isBorrowing(i)) {
            require(
              EModeConfiguration.isReserveEnabledOnBitmap(eModeCategory.borrowableBitmap, i),
              Errors.NOT_BORROWABLE_IN_EMODE
            );
          }
        }
      }
    }
  }
  /**
   * @notice Validates the action of activating the asset as collateral.
   * @dev Only possible if the asset has non-zero LTV and the user is not in isolation mode
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig the user configuration
   * @param reserveConfig The reserve configuration
   * @return True if the asset can be activated as collateral, false otherwise
   */
  function validateUseAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveConfigurationMap memory reserveConfig
  ) internal view returns (bool) {
    if (reserveConfig.getLtv() == 0) {
      return false;
    }
    if (!userConfig.isUsingAsCollateralAny()) {
      return true;
    }
    (bool isolationModeActive, , ) = userConfig.getIsolationModeState(reservesData, reservesList);
    return (!isolationModeActive && reserveConfig.getDebtCeiling() == 0);
  }
  /**
   * @notice Validates if an asset should be automatically activated as collateral in the following actions: supply,
   * transfer, mint unbacked, and liquidate
   * @dev This is used to ensure that isolated assets are not enabled as collateral automatically
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig the user configuration
   * @param reserveConfig The reserve configuration
   * @return True if the asset can be activated as collateral, false otherwise
   */
  function validateAutomaticUseAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveConfigurationMap memory reserveConfig,
    address aTokenAddress
  ) internal view returns (bool) {
    if (reserveConfig.getDebtCeiling() != 0) {
      // ensures only the ISOLATED_COLLATERAL_SUPPLIER_ROLE can enable collateral as side-effect of an action
      IPoolAddressesProvider addressesProvider = IncentivizedERC20(aTokenAddress)
        .POOL()
        .ADDRESSES_PROVIDER();
      if (
        !IAccessControl(addressesProvider.getACLManager()).hasRole(
          ISOLATED_COLLATERAL_SUPPLIER_ROLE,
          msg.sender
        )
      ) return false;
    }
    return validateUseAsCollateral(reservesData, reservesList, userConfig, reserveConfig);
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {EModeConfiguration} from '../configuration/EModeConfiguration.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {EModeLogic} from './EModeLogic.sol';
/**
 * @title GenericLogic library
 * @author Aave
 * @notice Implements protocol-level logic to calculate and validate the state of a user
 */
library GenericLogic {
  using ReserveLogic for DataTypes.ReserveData;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  struct CalculateUserAccountDataVars {
    uint256 assetPrice;
    uint256 assetUnit;
    uint256 userBalanceInBaseCurrency;
    uint256 decimals;
    uint256 ltv;
    uint256 liquidationThreshold;
    uint256 i;
    uint256 healthFactor;
    uint256 totalCollateralInBaseCurrency;
    uint256 totalDebtInBaseCurrency;
    uint256 avgLtv;
    uint256 avgLiquidationThreshold;
    uint256 eModeLtv;
    uint256 eModeLiqThreshold;
    address currentReserveAddress;
    bool hasZeroLtvCollateral;
    bool isInEModeCategory;
  }
  /**
   * @notice Calculates the user data across the reserves.
   * @dev It includes the total liquidity/collateral/borrow balances in the base currency used by the price feed,
   * the average Loan To Value, the average Liquidation Ratio, and the Health factor.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional parameters needed for the calculation
   * @return The total collateral of the user in the base currency used by the price feed
   * @return The total debt of the user in the base currency used by the price feed
   * @return The average ltv of the user
   * @return The average liquidation threshold of the user
   * @return The health factor of the user
   * @return True if the ltv is zero, false otherwise
   */
  function calculateUserAccountData(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.CalculateUserAccountDataParams memory params
  ) internal view returns (uint256, uint256, uint256, uint256, uint256, bool) {
    if (params.userConfig.isEmpty()) {
      return (0, 0, 0, 0, type(uint256).max, false);
    }
    CalculateUserAccountDataVars memory vars;
    if (params.userEModeCategory != 0) {
      vars.eModeLtv = eModeCategories[params.userEModeCategory].ltv;
      vars.eModeLiqThreshold = eModeCategories[params.userEModeCategory].liquidationThreshold;
    }
    while (vars.i < params.reservesCount) {
      if (!params.userConfig.isUsingAsCollateralOrBorrowing(vars.i)) {
        unchecked {
          ++vars.i;
        }
        continue;
      }
      vars.currentReserveAddress = reservesList[vars.i];
      if (vars.currentReserveAddress == address(0)) {
        unchecked {
          ++vars.i;
        }
        continue;
      }
      DataTypes.ReserveData storage currentReserve = reservesData[vars.currentReserveAddress];
      (vars.ltv, vars.liquidationThreshold, , vars.decimals, ) = currentReserve
        .configuration
        .getParams();
      unchecked {
        vars.assetUnit = 10 ** vars.decimals;
      }
      vars.assetPrice = IPriceOracleGetter(params.oracle).getAssetPrice(vars.currentReserveAddress);
      if (vars.liquidationThreshold != 0 && params.userConfig.isUsingAsCollateral(vars.i)) {
        vars.userBalanceInBaseCurrency = _getUserBalanceInBaseCurrency(
          params.user,
          currentReserve,
          vars.assetPrice,
          vars.assetUnit
        );
        vars.totalCollateralInBaseCurrency += vars.userBalanceInBaseCurrency;
        vars.isInEModeCategory =
          params.userEModeCategory != 0 &&
          EModeConfiguration.isReserveEnabledOnBitmap(
            eModeCategories[params.userEModeCategory].collateralBitmap,
            vars.i
          );
        if (vars.ltv != 0) {
          vars.avgLtv +=
            vars.userBalanceInBaseCurrency *
            (vars.isInEModeCategory ? vars.eModeLtv : vars.ltv);
        } else {
          vars.hasZeroLtvCollateral = true;
        }
        vars.avgLiquidationThreshold +=
          vars.userBalanceInBaseCurrency *
          (vars.isInEModeCategory ? vars.eModeLiqThreshold : vars.liquidationThreshold);
      }
      if (params.userConfig.isBorrowing(vars.i)) {
        vars.totalDebtInBaseCurrency += _getUserDebtInBaseCurrency(
          params.user,
          currentReserve,
          vars.assetPrice,
          vars.assetUnit
        );
      }
      unchecked {
        ++vars.i;
      }
    }
    unchecked {
      vars.avgLtv = vars.totalCollateralInBaseCurrency != 0
        ? vars.avgLtv / vars.totalCollateralInBaseCurrency
        : 0;
      vars.avgLiquidationThreshold = vars.totalCollateralInBaseCurrency != 0
        ? vars.avgLiquidationThreshold / vars.totalCollateralInBaseCurrency
        : 0;
    }
    vars.healthFactor = (vars.totalDebtInBaseCurrency == 0)
      ? type(uint256).max
      : (vars.totalCollateralInBaseCurrency.percentMul(vars.avgLiquidationThreshold)).wadDiv(
        vars.totalDebtInBaseCurrency
      );
    return (
      vars.totalCollateralInBaseCurrency,
      vars.totalDebtInBaseCurrency,
      vars.avgLtv,
      vars.avgLiquidationThreshold,
      vars.healthFactor,
      vars.hasZeroLtvCollateral
    );
  }
  /**
   * @notice Calculates the maximum amount that can be borrowed depending on the available collateral, the total debt
   * and the average Loan To Value
   * @param totalCollateralInBaseCurrency The total collateral in the base currency used by the price feed
   * @param totalDebtInBaseCurrency The total borrow balance in the base currency used by the price feed
   * @param ltv The average loan to value
   * @return The amount available to borrow in the base currency of the used by the price feed
   */
  function calculateAvailableBorrows(
    uint256 totalCollateralInBaseCurrency,
    uint256 totalDebtInBaseCurrency,
    uint256 ltv
  ) internal pure returns (uint256) {
    uint256 availableBorrowsInBaseCurrency = totalCollateralInBaseCurrency.percentMul(ltv);
    if (availableBorrowsInBaseCurrency <= totalDebtInBaseCurrency) {
      return 0;
    }
    availableBorrowsInBaseCurrency = availableBorrowsInBaseCurrency - totalDebtInBaseCurrency;
    return availableBorrowsInBaseCurrency;
  }
  /**
   * @notice Calculates total debt of the user in the based currency used to normalize the values of the assets
   * @dev This fetches the `balanceOf` of the variable debt token for the user. For gas reasons, the
   * variable debt balance is calculated by fetching `scaledBalancesOf` normalized debt, which is cheaper than
   * fetching `balanceOf`
   * @param user The address of the user
   * @param reserve The data of the reserve for which the total debt of the user is being calculated
   * @param assetPrice The price of the asset for which the total debt of the user is being calculated
   * @param assetUnit The value representing one full unit of the asset (10^decimals)
   * @return The total debt of the user normalized to the base currency
   */
  function _getUserDebtInBaseCurrency(
    address user,
    DataTypes.ReserveData storage reserve,
    uint256 assetPrice,
    uint256 assetUnit
  ) private view returns (uint256) {
    // fetching variable debt
    uint256 userTotalDebt = IScaledBalanceToken(reserve.variableDebtTokenAddress).scaledBalanceOf(
      user
    );
    if (userTotalDebt == 0) {
      return 0;
    }
    userTotalDebt = userTotalDebt.rayMul(reserve.getNormalizedDebt()) * assetPrice;
    unchecked {
      return userTotalDebt / assetUnit;
    }
  }
  /**
   * @notice Calculates total aToken balance of the user in the based currency used by the price oracle
   * @dev For gas reasons, the aToken balance is calculated by fetching `scaledBalancesOf` normalized debt, which
   * is cheaper than fetching `balanceOf`
   * @param user The address of the user
   * @param reserve The data of the reserve for which the total aToken balance of the user is being calculated
   * @param assetPrice The price of the asset for which the total aToken balance of the user is being calculated
   * @param assetUnit The value representing one full unit of the asset (10^decimals)
   * @return The total aToken balance of the user normalized to the base currency of the price oracle
   */
  function _getUserBalanceInBaseCurrency(
    address user,
    DataTypes.ReserveData storage reserve,
    uint256 assetPrice,
    uint256 assetUnit
  ) private view returns (uint256) {
    uint256 normalizedIncome = reserve.getNormalizedIncome();
    uint256 balance = (
      IScaledBalanceToken(reserve.aTokenAddress).scaledBalanceOf(user).rayMul(normalizedIncome)
    ) * assetPrice;
    unchecked {
      return balance / assetUnit;
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
/**
 * @title IVariableDebtToken
 * @author Aave
 * @notice Defines the basic interface for a variable debt token.
 */
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
  /**
   * @notice Mints debt token to the `onBehalfOf` address
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return True if the previous balance of the user is 0, false otherwise
   * @return The scaled total debt of the reserve
   */
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool, uint256);
  /**
   * @notice Burns user variable debt
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the debt will be burned
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   * @return The scaled total debt of the reserve
   */
  function burn(address from, uint256 amount, uint256 index) external returns (uint256);
  /**
   * @notice Returns the address of the underlying asset of this debtToken (E.g. WETH for variableDebtWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IReserveInterestRateStrategy
 * @author BGD Labs
 * @notice Basic interface for any rate strategy used by the Aave protocol
 */
interface IReserveInterestRateStrategy {
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The abi encoded reserve interest rate data to apply to the given reserve
   *   Abstracted this way as rate strategies can be custom
   */
  function setInterestRateParams(address reserve, bytes calldata rateData) external;
  /**
   * @notice Calculates the interest rates depending on the reserve's state and configurations
   * @param params The parameters needed to calculate interest rates
   * @return liquidityRate The liquidity rate expressed in ray
   * @return variableBorrowRate The variable borrow rate expressed in ray
   */
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view returns (uint256, uint256);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {WadRayMath} from './WadRayMath.sol';
/**
 * @title MathUtils library
 * @author Aave
 * @notice Provides functions to perform linear and compounded interest calculations
 */
library MathUtils {
  using WadRayMath for uint256;
  /// @dev Ignoring leap years
  uint256 internal constant SECONDS_PER_YEAR = 365 days;
  /**
   * @dev Function to calculate the interest accumulated using a linear interest rate formula
   * @param rate The interest rate, in ray
   * @param lastUpdateTimestamp The timestamp of the last update of the interest
   * @return The interest rate linearly accumulated during the timeDelta, in ray
   */
  function calculateLinearInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp
  ) internal view returns (uint256) {
    //solium-disable-next-line
    uint256 result = rate * (block.timestamp - uint256(lastUpdateTimestamp));
    unchecked {
      result = result / SECONDS_PER_YEAR;
    }
    return WadRayMath.RAY + result;
  }
  /**
   * @dev Function to calculate the interest using a compounded interest rate formula
   * To avoid expensive exponentiation, the calculation is performed using a binomial approximation:
   *
   *  (1+x)^n = 1+n*x+[n/2*(n-1)]*x^2+[n/6*(n-1)*(n-2)*x^3...
   *
   * The approximation slightly underpays liquidity providers and undercharges borrowers, with the advantage of great
   * gas cost reductions. The whitepaper contains reference to the approximation and a table showing the margin of
   * error per different time periods
   *
   * @param rate The interest rate, in ray
   * @param lastUpdateTimestamp The timestamp of the last update of the interest
   * @return The interest rate compounded during the timeDelta, in ray
   */
  function calculateCompoundedInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp,
    uint256 currentTimestamp
  ) internal pure returns (uint256) {
    //solium-disable-next-line
    uint256 exp = currentTimestamp - uint256(lastUpdateTimestamp);
    if (exp == 0) {
      return WadRayMath.RAY;
    }
    uint256 expMinusOne;
    uint256 expMinusTwo;
    uint256 basePowerTwo;
    uint256 basePowerThree;
    unchecked {
      expMinusOne = exp - 1;
      expMinusTwo = exp > 2 ? exp - 2 : 0;
      basePowerTwo = rate.rayMul(rate) / (SECONDS_PER_YEAR * SECONDS_PER_YEAR);
      basePowerThree = basePowerTwo.rayMul(rate) / SECONDS_PER_YEAR;
    }
    uint256 secondTerm = exp * expMinusOne * basePowerTwo;
    unchecked {
      secondTerm /= 2;
    }
    uint256 thirdTerm = exp * expMinusOne * expMinusTwo * basePowerThree;
    unchecked {
      thirdTerm /= 6;
    }
    return WadRayMath.RAY + (rate * exp) / SECONDS_PER_YEAR + secondTerm + thirdTerm;
  }
  /**
   * @dev Calculates the compounded interest between the timestamp of the last update and the current block timestamp
   * @param rate The interest rate (in ray)
   * @param lastUpdateTimestamp The timestamp from which the interest accumulation needs to be calculated
   * @return The interest rate compounded between lastUpdateTimestamp and current block timestamp, in ray
   */
  function calculateCompoundedInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp
  ) internal view returns (uint256) {
    return calculateCompoundedInterest(rate, lastUpdateTimestamp, block.timestamp);
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
  // Maximum percentage factor (100.00%)
  uint256 internal constant PERCENTAGE_FACTOR = 1e4;
  // Half percentage factor (50.00%)
  uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;
  /**
   * @notice Executes a percentage multiplication
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentmul percentage
   */
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
    assembly {
      if iszero(
        or(
          iszero(percentage),
          iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
        )
      ) {
        revert(0, 0)
      }
      result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
    }
  }
  /**
   * @notice Executes a percentage division
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentdiv percentage
   */
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
    assembly {
      if or(
        iszero(percentage),
        iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
      ) {
        revert(0, 0)
      }
      result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
    }
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity ^0.8.10;
/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
    return uint224(value);
  }
  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
    return uint128(value);
  }
  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
    return uint96(value);
  }
  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
    return uint64(value);
  }
  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
    return uint32(value);
  }
  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
    return uint16(value);
  }
  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
    return uint8(value);
  }
  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    require(value >= 0, 'SafeCast: value must be positive');
    return uint256(value);
  }
  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   *
   * _Available since v3.1._
   */
  function toInt128(int256 value) internal pure returns (int128) {
    require(
      value >= type(int128).min && value <= type(int128).max,
      "SafeCast: value doesn't fit in 128 bits"
    );
    return int128(value);
  }
  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   *
   * _Available since v3.1._
   */
  function toInt64(int256 value) internal pure returns (int64) {
    require(
      value >= type(int64).min && value <= type(int64).max,
      "SafeCast: value doesn't fit in 64 bits"
    );
    return int64(value);
  }
  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   *
   * _Available since v3.1._
   */
  function toInt32(int256 value) internal pure returns (int32) {
    require(
      value >= type(int32).min && value <= type(int32).max,
      "SafeCast: value doesn't fit in 32 bits"
    );
    return int32(value);
  }
  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   *
   * _Available since v3.1._
   */
  function toInt16(int256 value) internal pure returns (int16) {
    require(
      value >= type(int16).min && value <= type(int16).max,
      "SafeCast: value doesn't fit in 16 bits"
    );
    return int16(value);
  }
  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   *
   * _Available since v3.1._
   */
  function toInt8(int256 value) internal pure returns (int8) {
    require(
      value >= type(int8).min && value <= type(int8).max,
      "SafeCast: value doesn't fit in 8 bits"
    );
    return int8(value);
  }
  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
    return int256(value);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IPriceOracleGetter
 * @author Aave
 * @notice Interface for the Aave price oracle.
 */
interface IPriceOracleGetter {
  /**
   * @notice Returns the base currency address
   * @dev Address 0x0 is reserved for USD as base currency.
   * @return Returns the base currency address.
   */
  function BASE_CURRENCY() external view returns (address);
  /**
   * @notice Returns the base currency unit
   * @dev 1 ether for ETH, 1e8 for USD.
   * @return Returns the base currency unit.
   */
  function BASE_CURRENCY_UNIT() external view returns (uint256);
  /**
   * @notice Returns the asset price in the base currency
   * @param asset The address of the asset
   * @return The price of the asset
   */
  function getAssetPrice(address asset) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';
/**
 * @title UserConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the user configuration
 */
library UserConfiguration {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  uint256 internal constant BORROWING_MASK =
    0x5555555555555555555555555555555555555555555555555555555555555555;
  uint256 internal constant COLLATERAL_MASK =
    0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;
  /**
   * @notice Sets if the user is borrowing the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param borrowing True if the user is borrowing the reserve, false otherwise
   */
  function setBorrowing(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool borrowing
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << (reserveIndex << 1);
      if (borrowing) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }
  /**
   * @notice Sets if the user is using as collateral the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param usingAsCollateral True if the user is using the reserve as collateral, false otherwise
   */
  function setUsingAsCollateral(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool usingAsCollateral
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << ((reserveIndex << 1) + 1);
      if (usingAsCollateral) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }
  /**
   * @notice Returns if a user has been using the reserve for borrowing or as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
   */
  function isUsingAsCollateralOrBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 3 != 0;
    }
  }
  /**
   * @notice Validate a user has been using the reserve for borrowing
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing, false otherwise
   */
  function isBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 1 != 0;
    }
  }
  /**
   * @notice Validate a user has been using the reserve as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve as collateral, false otherwise
   */
  function isUsingAsCollateral(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> ((reserveIndex << 1) + 1)) & 1 != 0;
    }
  }
  /**
   * @notice Checks if a user has been supplying only one reserve as collateral
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isUsingAsCollateralOne(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    uint256 collateralData = self.data & COLLATERAL_MASK;
    return collateralData != 0 && (collateralData & (collateralData - 1) == 0);
  }
  /**
   * @notice Checks if a user has been supplying any reserve as collateral
   * @param self The configuration object
   * @return True if the user has been supplying as collateral any reserve, false otherwise
   */
  function isUsingAsCollateralAny(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    return self.data & COLLATERAL_MASK != 0;
  }
  /**
   * @notice Checks if a user has been borrowing only one asset
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isBorrowingOne(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    uint256 borrowingData = self.data & BORROWING_MASK;
    return borrowingData != 0 && (borrowingData & (borrowingData - 1) == 0);
  }
  /**
   * @notice Checks if a user has been borrowing from any reserve
   * @param self The configuration object
   * @return True if the user has been borrowing any reserve, false otherwise
   */
  function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data & BORROWING_MASK != 0;
  }
  /**
   * @notice Checks if a user has not been using any reserve for borrowing or supply
   * @param self The configuration object
   * @return True if the user has not been borrowing or supplying any reserve, false otherwise
   */
  function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data == 0;
  }
  /**
   * @notice Returns the Isolation Mode state of the user
   * @param self The configuration object
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @return True if the user is in isolation mode, false otherwise
   * @return The address of the only asset used as collateral
   * @return The debt ceiling of the reserve
   */
  function getIsolationModeState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address, uint256) {
    if (isUsingAsCollateralOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, COLLATERAL_MASK);
      address assetAddress = reservesList[assetId];
      uint256 ceiling = reservesData[assetAddress].configuration.getDebtCeiling();
      if (ceiling != 0) {
        return (true, assetAddress, ceiling);
      }
    }
    return (false, address(0), 0);
  }
  /**
   * @notice Returns the siloed borrowing state for the user
   * @param self The configuration object
   * @param reservesData The data of all the reserves
   * @param reservesList The reserve list
   * @return True if the user has borrowed a siloed asset, false otherwise
   * @return The address of the only borrowed asset
   */
  function getSiloedBorrowingState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address) {
    if (isBorrowingOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, BORROWING_MASK);
      address assetAddress = reservesList[assetId];
      if (reservesData[assetAddress].configuration.getSiloedBorrowing()) {
        return (true, assetAddress);
      }
    }
    return (false, address(0));
  }
  /**
   * @notice Returns the address of the first asset flagged in the bitmap given the corresponding bitmask
   * @param self The configuration object
   * @return The index of the first asset flagged in the bitmap once the corresponding mask is applied
   */
  function _getFirstAssetIdByMask(
    DataTypes.UserConfigurationMap memory self,
    uint256 mask
  ) internal pure returns (uint256) {
    unchecked {
      uint256 bitmapData = self.data & mask;
      uint256 firstAssetPosition = bitmapData & ~(bitmapData - 1);
      uint256 id;
      while ((firstAssetPosition >>= 2) != 0) {
        id += 1;
      }
      return id;
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
/**
 * @title IFlashLoanReceiver
 * @author Aave
 * @notice Defines the basic interface of a flashloan-receiver contract.
 * @dev Implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 */
interface IFlashLoanReceiver {
  /**
   * @notice Executes an operation after receiving the flash-borrowed assets
   * @dev Ensure that the contract can return the debt + premium, e.g., has
   *      enough funds to repay and has approved the Pool to pull the total amount
   * @param assets The addresses of the flash-borrowed assets
   * @param amounts The amounts of the flash-borrowed assets
   * @param premiums The fee of each flash-borrowed asset
   * @param initiator The address of the flashloan initiator
   * @param params The byte-encoded params passed when initiating the flashloan
   * @return True if the execution of the operation succeeds, false otherwise
   */
  function executeOperation(
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata premiums,
    address initiator,
    bytes calldata params
  ) external returns (bool);
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  function POOL() external view returns (IPool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
/**
 * @title IFlashLoanSimpleReceiver
 * @author Aave
 * @notice Defines the basic interface of a flashloan-receiver contract.
 * @dev Implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 */
interface IFlashLoanSimpleReceiver {
  /**
   * @notice Executes an operation after receiving the flash-borrowed asset
   * @dev Ensure that the contract can return the debt + premium, e.g., has
   *      enough funds to repay and has approved the Pool to pull the total amount
   * @param asset The address of the flash-borrowed asset
   * @param amount The amount of the flash-borrowed asset
   * @param premium The fee of the flash-borrowed asset
   * @param initiator The address of the flashloan initiator
   * @param params The byte-encoded params passed when initiating the flashloan
   * @return True if the execution of the operation succeeds, false otherwise
   */
  function executeOperation(
    address asset,
    uint256 amount,
    uint256 premium,
    address initiator,
    bytes calldata params
  ) external returns (bool);
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  function POOL() external view returns (IPool);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
/**
 * @title IsolationModeLogic library
 * @author Aave
 * @notice Implements the base logic for handling repayments for assets borrowed in isolation mode
 */
library IsolationModeLogic {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using SafeCast for uint256;
  // See `IPool` for descriptions
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @notice updated the isolated debt whenever a position collateralized by an isolated asset is repaid or liquidated
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping
   * @param reserveCache The cached data of the reserve
   * @param repayAmount The amount being repaid
   */
  function updateIsolatedDebtIfIsolated(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveCache memory reserveCache,
    uint256 repayAmount
  ) internal {
    (bool isolationModeActive, address isolationModeCollateralAddress, ) = userConfig
      .getIsolationModeState(reservesData, reservesList);
    if (isolationModeActive) {
      uint128 isolationModeTotalDebt = reservesData[isolationModeCollateralAddress]
        .isolationModeTotalDebt;
      uint128 isolatedDebtRepaid = (repayAmount /
        10 **
          (reserveCache.reserveConfiguration.getDecimals() -
            ReserveConfiguration.DEBT_CEILING_DECIMALS)).toUint128();
      // since the debt ceiling does not take into account the interest accrued, it might happen that amount
      // repaid > debt in isolation mode
      if (isolationModeTotalDebt <= isolatedDebtRepaid) {
        reservesData[isolationModeCollateralAddress].isolationModeTotalDebt = 0;
        emit IsolationModeTotalDebtUpdated(isolationModeCollateralAddress, 0);
      } else {
        uint256 nextIsolationModeTotalDebt = reservesData[isolationModeCollateralAddress]
          .isolationModeTotalDebt = isolationModeTotalDebt - isolatedDebtRepaid;
        emit IsolationModeTotalDebtUpdated(
          isolationModeCollateralAddress,
          nextIsolationModeTotalDebt
        );
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';
/**
 * @title EModeConfiguration library
 * @author BGD Labs
 * @notice Implements the bitmap logic to handle the eMode configuration
 */
library EModeConfiguration {
  /**
   * @notice Sets a bit in a given bitmap that represents the reserve index range
   * @dev The supplied bitmap is supposed to be a uint128 in which each bit represents a reserve
   * @param bitmap The bitmap
   * @param reserveIndex The index of the reserve in the bitmap
   * @param enabled True if the reserveIndex should be enabled on the bitmap, false otherwise
   * @return The altered bitmap
   */
  function setReserveBitmapBit(
    uint128 bitmap,
    uint256 reserveIndex,
    bool enabled
  ) internal pure returns (uint128) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint128 bit = uint128(1 << reserveIndex);
      if (enabled) {
        return bitmap | bit;
      } else {
        return bitmap & ~bit;
      }
    }
  }
  /**
   * @notice Validates if a reserveIndex is flagged as enabled on a given bitmap
   * @param bitmap The bitmap
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the reserveindex is flagged true
   */
  function isReserveEnabledOnBitmap(
    uint128 bitmap,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (bitmap >> reserveIndex) & 1 != 0;
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);
  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);
  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IPriceOracleSentinel
 * @author Aave
 * @notice Defines the basic interface for the PriceOracleSentinel
 */
interface IPriceOracleSentinel {
  /**
   * @dev Emitted after the sequencer oracle is updated
   * @param newSequencerOracle The new sequencer oracle
   */
  event SequencerOracleUpdated(address newSequencerOracle);
  /**
   * @dev Emitted after the grace period is updated
   * @param newGracePeriod The new grace period value
   */
  event GracePeriodUpdated(uint256 newGracePeriod);
  /**
   * @notice Returns the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns true if the `borrow` operation is allowed.
   * @dev Operation not allowed when PriceOracle is down or grace period not passed.
   * @return True if the `borrow` operation is allowed, false otherwise.
   */
  function isBorrowAllowed() external view returns (bool);
  /**
   * @notice Returns true if the `liquidation` operation is allowed.
   * @dev Operation not allowed when PriceOracle is down or grace period not passed.
   * @return True if the `liquidation` operation is allowed, false otherwise.
   */
  function isLiquidationAllowed() external view returns (bool);
  /**
   * @notice Updates the address of the sequencer oracle
   * @param newSequencerOracle The address of the new Sequencer Oracle to use
   */
  function setSequencerOracle(address newSequencerOracle) external;
  /**
   * @notice Updates the duration of the grace period
   * @param newGracePeriod The value of the new grace period duration
   */
  function setGracePeriod(uint256 newGracePeriod) external;
  /**
   * @notice Returns the SequencerOracle
   * @return The address of the sequencer oracle contract
   */
  function getSequencerOracle() external view returns (address);
  /**
   * @notice Returns the grace period
   * @return The duration of the grace period
   */
  function getGracePeriod() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
  /**
   * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
   *
   * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
   * {RoleAdminChanged} not being emitted signaling this.
   *
   * _Available since v3.1._
   */
  event RoleAdminChanged(
    bytes32 indexed role,
    bytes32 indexed previousAdminRole,
    bytes32 indexed newAdminRole
  );
  /**
   * @dev Emitted when `account` is granted `role`.
   *
   * `sender` is the account that originated the contract call, an admin role
   * bearer except when using {AccessControl-_setupRole}.
   */
  event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
  /**
   * @dev Emitted when `account` is revoked `role`.
   *
   * `sender` is the account that originated the contract call:
   *   - if using `revokeRole`, it is the admin role bearer
   *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
   */
  event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
  /**
   * @dev Returns `true` if `account` has been granted `role`.
   */
  function hasRole(bytes32 role, address account) external view returns (bool);
  /**
   * @dev Returns the admin role that controls `role`. See {grantRole} and
   * {revokeRole}.
   *
   * To change a role's admin, use {AccessControl-_setRoleAdmin}.
   */
  function getRoleAdmin(bytes32 role) external view returns (bytes32);
  /**
   * @dev Grants `role` to `account`.
   *
   * If `account` had not been already granted `role`, emits a {RoleGranted}
   * event.
   *
   * Requirements:
   *
   * - the caller must have ``role``'s admin role.
   */
  function grantRole(bytes32 role, address account) external;
  /**
   * @dev Revokes `role` from `account`.
   *
   * If `account` had been granted `role`, emits a {RoleRevoked} event.
   *
   * Requirements:
   *
   * - the caller must have ``role``'s admin role.
   */
  function revokeRole(bytes32 role, address account) external;
  /**
   * @dev Revokes `role` from the calling account.
   *
   * Roles are often managed via {grantRole} and {revokeRole}: this function's
   * purpose is to provide a mechanism for accounts to lose their privileges
   * if they are compromised (such as when a trusted device is misplaced).
   *
   * If the calling account had been granted `role`, emits a {RoleRevoked}
   * event.
   *
   * Requirements:
   *
   * - the caller must be `account`.
   */
  function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IACLManager} from '../../../interfaces/IACLManager.sol';
/**
 * @title IncentivizedERC20
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 * @notice Basic ERC20 implementation
 */
abstract contract IncentivizedERC20 is Context, IERC20Detailed {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    IACLManager aclManager = IACLManager(_addressesProvider.getACLManager());
    require(aclManager.isPoolAdmin(msg.sender), Errors.CALLER_NOT_POOL_ADMIN);
    _;
  }
  /**
   * @dev Only pool can call functions marked by this modifier.
   */
  modifier onlyPool() {
    require(_msgSender() == address(POOL), Errors.CALLER_MUST_BE_POOL);
    _;
  }
  /**
   * @dev UserState - additionalData is a flexible field.
   * ATokens and VariableDebtTokens use this field store the index of the
   * user's last supply/withdrawal/borrow/repayment.
   */
  struct UserState {
    uint128 balance;
    uint128 additionalData;
  }
  // Map of users address and their state data (userAddress => userStateData)
  mapping(address => UserState) internal _userState;
  // Map of allowances (delegator => delegatee => allowanceAmount)
  mapping(address => mapping(address => uint256)) private _allowances;
  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  IAaveIncentivesController internal _incentivesController;
  IPoolAddressesProvider internal immutable _addressesProvider;
  IPool public immutable POOL;
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name_ The name of the token
   * @param symbol_ The symbol of the token
   * @param decimals_ The number of decimals of the token
   */
  constructor(IPool pool, string memory name_, string memory symbol_, uint8 decimals_) {
    _addressesProvider = pool.ADDRESSES_PROVIDER();
    _name = name_;
    _symbol = symbol_;
    _decimals = decimals_;
    POOL = pool;
  }
  /// @inheritdoc IERC20Detailed
  function name() public view override returns (string memory) {
    return _name;
  }
  /// @inheritdoc IERC20Detailed
  function symbol() external view override returns (string memory) {
    return _symbol;
  }
  /// @inheritdoc IERC20Detailed
  function decimals() external view override returns (uint8) {
    return _decimals;
  }
  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }
  /// @inheritdoc IERC20
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _userState[account].balance;
  }
  /**
   * @notice Returns the address of the Incentives Controller contract
   * @return The address of the Incentives Controller
   */
  function getIncentivesController() external view virtual returns (IAaveIncentivesController) {
    return _incentivesController;
  }
  /**
   * @notice Sets a new Incentives Controller
   * @param controller the new Incentives controller
   */
  function setIncentivesController(IAaveIncentivesController controller) external onlyPoolAdmin {
    _incentivesController = controller;
  }
  /// @inheritdoc IERC20
  function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _transfer(_msgSender(), recipient, castAmount);
    return true;
  }
  /// @inheritdoc IERC20
  function allowance(
    address owner,
    address spender
  ) external view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }
  /// @inheritdoc IERC20
  function approve(address spender, uint256 amount) external virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }
  /// @inheritdoc IERC20
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - castAmount);
    _transfer(sender, recipient, castAmount);
    return true;
  }
  /**
   * @notice Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   */
  function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
    return true;
  }
  /**
   * @notice Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   */
  function decreaseAllowance(
    address spender,
    uint256 subtractedValue
  ) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
    return true;
  }
  /**
   * @notice Transfers tokens between two users and apply incentives if defined.
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(address sender, address recipient, uint128 amount) internal virtual {
    uint128 oldSenderBalance = _userState[sender].balance;
    _userState[sender].balance = oldSenderBalance - amount;
    uint128 oldRecipientBalance = _userState[recipient].balance;
    _userState[recipient].balance = oldRecipientBalance + amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      incentivesControllerLocal.handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        incentivesControllerLocal.handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }
  /**
   * @notice Approve `spender` to use `amount` of `owner`s balance
   * @param owner The address owning the tokens
   * @param spender The address approved for spending
   * @param amount The amount of tokens to approve spending of
   */
  function _approve(address owner, address spender, uint256 amount) internal virtual {
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }
  /**
   * @notice Update the name of the token
   * @param newName The new name for the token
   */
  function _setName(string memory newName) internal {
    _name = newName;
  }
  /**
   * @notice Update the symbol for the token
   * @param newSymbol The new symbol for the token
   */
  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }
  /**
   * @notice Update the number of decimals for the token
   * @param newDecimals The new number of decimals for the token
   */
  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableDebtToken
 * @author Aave
 * @notice Interface for the initialize function common between debt tokens
 */
interface IInitializableDebtToken {
  /**
   * @dev Emitted when a debt token is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param incentivesController The address of the incentives controller for this aToken
   * @param debtTokenDecimals The decimals of the debt token
   * @param debtTokenName The name of the debt token
   * @param debtTokenSymbol The symbol of the debt token
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address incentivesController,
    uint8 debtTokenDecimals,
    string debtTokenName,
    string debtTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the debt token.
   * @param pool The pool contract that is initializing this contract
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }
  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
import {IERC20} from './IERC20.sol';
interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);
  function symbol() external view returns (string memory);
  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {Errors} from '../helpers/Errors.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
/**
 * @title SupplyLogic library
 * @author Aave
 * @notice Implements the base logic for supply/withdraw
 */
library SupplyLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  // See `IPool` for descriptions
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @notice Implements the supply feature. Through `supply()`, users supply assets to the Aave protocol.
   * @dev Emits the `Supply()` event.
   * @dev In the first supply action, `ReserveUsedAsCollateralEnabled()` is emitted, if the asset can be enabled as
   * collateral.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the supply function
   */
  function executeSupply(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteSupplyParams memory params
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);
    ValidationLogic.validateSupply(reserveCache, reserve, params.amount, params.onBehalfOf);
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, params.asset, params.amount, 0);
    IERC20(params.asset).safeTransferFrom(msg.sender, reserveCache.aTokenAddress, params.amount);
    bool isFirstSupply = IAToken(reserveCache.aTokenAddress).mint(
      msg.sender,
      params.onBehalfOf,
      params.amount,
      reserveCache.nextLiquidityIndex
    );
    if (isFirstSupply) {
      if (
        ValidationLogic.validateAutomaticUseAsCollateral(
          reservesData,
          reservesList,
          userConfig,
          reserveCache.reserveConfiguration,
          reserveCache.aTokenAddress
        )
      ) {
        userConfig.setUsingAsCollateral(reserve.id, true);
        emit ReserveUsedAsCollateralEnabled(params.asset, params.onBehalfOf);
      }
    }
    emit Supply(params.asset, msg.sender, params.onBehalfOf, params.amount, params.referralCode);
  }
  /**
   * @notice Implements the withdraw feature. Through `withdraw()`, users redeem their aTokens for the underlying asset
   * previously supplied in the Aave protocol.
   * @dev Emits the `Withdraw()` event.
   * @dev If the user withdraws everything, `ReserveUsedAsCollateralDisabled()` is emitted.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the withdraw function
   * @return The actual amount withdrawn
   */
  function executeWithdraw(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteWithdrawParams memory params
  ) external returns (uint256) {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    require(params.to != reserveCache.aTokenAddress, Errors.WITHDRAW_TO_ATOKEN);
    reserve.updateState(reserveCache);
    uint256 userBalance = IAToken(reserveCache.aTokenAddress).scaledBalanceOf(msg.sender).rayMul(
      reserveCache.nextLiquidityIndex
    );
    uint256 amountToWithdraw = params.amount;
    if (params.amount == type(uint256).max) {
      amountToWithdraw = userBalance;
    }
    ValidationLogic.validateWithdraw(reserveCache, amountToWithdraw, userBalance);
    reserve.updateInterestRatesAndVirtualBalance(reserveCache, params.asset, 0, amountToWithdraw);
    bool isCollateral = userConfig.isUsingAsCollateral(reserve.id);
    if (isCollateral && amountToWithdraw == userBalance) {
      userConfig.setUsingAsCollateral(reserve.id, false);
      emit ReserveUsedAsCollateralDisabled(params.asset, msg.sender);
    }
    IAToken(reserveCache.aTokenAddress).burn(
      msg.sender,
      params.to,
      amountToWithdraw,
      reserveCache.nextLiquidityIndex
    );
    if (isCollateral && userConfig.isBorrowingAny()) {
      ValidationLogic.validateHFAndLtv(
        reservesData,
        reservesList,
        eModeCategories,
        userConfig,
        params.asset,
        msg.sender,
        params.reservesCount,
        params.oracle,
        params.userEModeCategory
      );
    }
    emit Withdraw(params.asset, msg.sender, params.to, amountToWithdraw);
    return amountToWithdraw;
  }
  /**
   * @notice Validates a transfer of aTokens. The sender is subjected to health factor validation to avoid
   * collateralization constraints violation.
   * @dev Emits the `ReserveUsedAsCollateralEnabled()` event for the `to` account, if the asset is being activated as
   * collateral.
   * @dev In case the `from` user transfers everything, `ReserveUsedAsCollateralDisabled()` is emitted for `from`.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param usersConfig The users configuration mapping that track the supplied/borrowed assets
   * @param params The additional parameters needed to execute the finalizeTransfer function
   */
  function executeFinalizeTransfer(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    mapping(address => DataTypes.UserConfigurationMap) storage usersConfig,
    DataTypes.FinalizeTransferParams memory params
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    ValidationLogic.validateTransfer(reserve);
    uint256 reserveId = reserve.id;
    uint256 scaledAmount = params.amount.rayDiv(reserve.getNormalizedIncome());
    if (params.from != params.to && scaledAmount != 0) {
      DataTypes.UserConfigurationMap storage fromConfig = usersConfig[params.from];
      if (fromConfig.isUsingAsCollateral(reserveId)) {
        if (fromConfig.isBorrowingAny()) {
          ValidationLogic.validateHFAndLtv(
            reservesData,
            reservesList,
            eModeCategories,
            usersConfig[params.from],
            params.asset,
            params.from,
            params.reservesCount,
            params.oracle,
            params.fromEModeCategory
          );
        }
        if (params.balanceFromBefore == params.amount) {
          fromConfig.setUsingAsCollateral(reserveId, false);
          emit ReserveUsedAsCollateralDisabled(params.asset, params.from);
        }
      }
      if (params.balanceToBefore == 0) {
        DataTypes.UserConfigurationMap storage toConfig = usersConfig[params.to];
        if (
          ValidationLogic.validateAutomaticUseAsCollateral(
            reservesData,
            reservesList,
            toConfig,
            reserve.configuration,
            reserve.aTokenAddress
          )
        ) {
          toConfig.setUsingAsCollateral(reserveId, true);
          emit ReserveUsedAsCollateralEnabled(params.asset, params.to);
        }
      }
    }
  }
  /**
   * @notice Executes the 'set as collateral' feature. A user can choose to activate or deactivate an asset as
   * collateral at any point in time. Deactivating an asset as collateral is subjected to the usual health factor
   * checks to ensure collateralization.
   * @dev Emits the `ReserveUsedAsCollateralEnabled()` event if the asset can be activated as collateral.
   * @dev In case the asset is being deactivated as collateral, `ReserveUsedAsCollateralDisabled()` is emitted.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The users configuration mapping that track the supplied/borrowed assets
   * @param asset The address of the asset being configured as collateral
   * @param useAsCollateral True if the user wants to set the asset as collateral, false otherwise
   * @param reservesCount The number of initialized reserves
   * @param priceOracle The address of the price oracle
   * @param userEModeCategory The eMode category chosen by the user
   */
  function executeUseReserveAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    address asset,
    bool useAsCollateral,
    uint256 reservesCount,
    address priceOracle,
    uint8 userEModeCategory
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    uint256 userBalance = IERC20(reserveCache.aTokenAddress).balanceOf(msg.sender);
    ValidationLogic.validateSetUseReserveAsCollateral(reserveCache, userBalance);
    if (useAsCollateral == userConfig.isUsingAsCollateral(reserve.id)) return;
    if (useAsCollateral) {
      require(
        ValidationLogic.validateUseAsCollateral(
          reservesData,
          reservesList,
          userConfig,
          reserveCache.reserveConfiguration
        ),
        Errors.USER_IN_ISOLATION_MODE_OR_LTV_ZERO
      );
      userConfig.setUsingAsCollateral(reserve.id, true);
      emit ReserveUsedAsCollateralEnabled(asset, msg.sender);
    } else {
      userConfig.setUsingAsCollateral(reserve.id, false);
      ValidationLogic.validateHFAndLtv(
        reservesData,
        reservesList,
        eModeCategories,
        userConfig,
        asset,
        msg.sender,
        reservesCount,
        priceOracle,
        userEModeCategory
      );
      emit ReserveUsedAsCollateralDisabled(asset, msg.sender);
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity ^0.8.10;
import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';
/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    bytes4 selector_ = token.transfer.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }
  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    bytes4 selector_ = token.transferFrom.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }
  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\\x08\\xc3\\x79\\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }
      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }
        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())
        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);
  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;
  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;
  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;
  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;
  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;
  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);
  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);
  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';
/**
 * @title UserConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the user configuration
 */
library UserConfiguration {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  uint256 internal constant BORROWING_MASK =
    0x5555555555555555555555555555555555555555555555555555555555555555;
  uint256 internal constant COLLATERAL_MASK =
    0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;
  /**
   * @notice Sets if the user is borrowing the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param borrowing True if the user is borrowing the reserve, false otherwise
   */
  function setBorrowing(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool borrowing
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << (reserveIndex << 1);
      if (borrowing) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }
  /**
   * @notice Sets if the user is using as collateral the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param usingAsCollateral True if the user is using the reserve as collateral, false otherwise
   */
  function setUsingAsCollateral(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool usingAsCollateral
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << ((reserveIndex << 1) + 1);
      if (usingAsCollateral) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }
  /**
   * @notice Returns if a user has been using the reserve for borrowing or as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
   */
  function isUsingAsCollateralOrBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 3 != 0;
    }
  }
  /**
   * @notice Validate a user has been using the reserve for borrowing
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing, false otherwise
   */
  function isBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 1 != 0;
    }
  }
  /**
   * @notice Validate a user has been using the reserve as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve as collateral, false otherwise
   */
  function isUsingAsCollateral(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> ((reserveIndex << 1) + 1)) & 1 != 0;
    }
  }
  /**
   * @notice Checks if a user has been supplying only one reserve as collateral
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isUsingAsCollateralOne(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    uint256 collateralData = self.data & COLLATERAL_MASK;
    return collateralData != 0 && (collateralData & (collateralData - 1) == 0);
  }
  /**
   * @notice Checks if a user has been supplying any reserve as collateral
   * @param self The configuration object
   * @return True if the user has been supplying as collateral any reserve, false otherwise
   */
  function isUsingAsCollateralAny(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    return self.data & COLLATERAL_MASK != 0;
  }
  /**
   * @notice Checks if a user has been borrowing only one asset
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isBorrowingOne(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    uint256 borrowingData = self.data & BORROWING_MASK;
    return borrowingData != 0 && (borrowingData & (borrowingData - 1) == 0);
  }
  /**
   * @notice Checks if a user has been borrowing from any reserve
   * @param self The configuration object
   * @return True if the user has been borrowing any reserve, false otherwise
   */
  function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data & BORROWING_MASK != 0;
  }
  /**
   * @notice Checks if a user has not been using any reserve for borrowing or supply
   * @param self The configuration object
   * @return True if the user has not been borrowing or supplying any reserve, false otherwise
   */
  function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data == 0;
  }
  /**
   * @notice Returns the Isolation Mode state of the user
   * @param self The configuration object
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @return True if the user is in isolation mode, false otherwise
   * @return The address of the only asset used as collateral
   * @return The debt ceiling of the reserve
   */
  function getIsolationModeState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address, uint256) {
    if (isUsingAsCollateralOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, COLLATERAL_MASK);
      address assetAddress = reservesList[assetId];
      uint256 ceiling = reservesData[assetAddress].configuration.getDebtCeiling();
      if (ceiling != 0) {
        return (true, assetAddress, ceiling);
      }
    }
    return (false, address(0), 0);
  }
  /**
   * @notice Returns the siloed borrowing state for the user
   * @param self The configuration object
   * @param reservesData The data of all the reserves
   * @param reservesList The reserve list
   * @return True if the user has borrowed a siloed asset, false otherwise
   * @return The address of the only borrowed asset
   */
  function getSiloedBorrowingState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address) {
    if (isBorrowingOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, BORROWING_MASK);
      address assetAddress = reservesList[assetId];
      if (reservesData[assetAddress].configuration.getSiloedBorrowing()) {
        return (true, assetAddress);
      }
    }
    return (false, address(0));
  }
  /**
   * @notice Returns the address of the first asset flagged in the bitmap given the corresponding bitmask
   * @param self The configuration object
   * @return The index of the first asset flagged in the bitmap once the corresponding mask is applied
   */
  function _getFirstAssetIdByMask(
    DataTypes.UserConfigurationMap memory self,
    uint256 mask
  ) internal pure returns (uint256) {
    unchecked {
      uint256 bitmapData = self.data & mask;
      uint256 firstAssetPosition = bitmapData & ~(bitmapData - 1);
      uint256 id;
      while ((firstAssetPosition >>= 2) != 0) {
        id += 1;
      }
      return id;
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 __deprecatedStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }
  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused
    uint256 data;
  }
  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }
  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }
  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }
  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }
  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }
  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }
  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }
  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }
  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }
  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }
  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }
  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }
  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }
  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }
  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }
  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }
  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }
  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;
  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;
  uint256 internal constant WAD_RAY_RATIO = 1e9;
  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }
  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }
  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }
  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }
  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }
  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)
      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
  // Maximum percentage factor (100.00%)
  uint256 internal constant PERCENTAGE_FACTOR = 1e4;
  // Half percentage factor (50.00%)
  uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;
  /**
   * @notice Executes a percentage multiplication
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentmul percentage
   */
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
    assembly {
      if iszero(
        or(
          iszero(percentage),
          iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
        )
      ) {
        revert(0, 0)
      }
      result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
    }
  }
  /**
   * @notice Executes a percentage division
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentdiv percentage
   */
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
    assembly {
      if or(
        iszero(percentage),
        iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
      ) {
        revert(0, 0)
      }
      result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {Address} from '../../../dependencies/openzeppelin/contracts/Address.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {IPriceOracleSentinel} from '../../../interfaces/IPriceOracleSentinel.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IAccessControl} from '../../../dependencies/openzeppelin/contracts/IAccessControl.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {EModeConfiguration} from '../configuration/EModeConfiguration.sol';
import {Errors} from '../helpers/Errors.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {GenericLogic} from './GenericLogic.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IncentivizedERC20} from '../../tokenization/base/IncentivizedERC20.sol';
/**
 * @title ReserveLogic library
 * @author Aave
 * @notice Implements functions to validate the different actions of the protocol
 */
library ValidationLogic {
  using ReserveLogic for DataTypes.ReserveData;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using Address for address;
  // Factor to apply to "only-variable-debt" liquidity rate to get threshold for rebalancing, expressed in bps
  // A value of 0.9e4 results in 90%
  uint256 public constant REBALANCE_UP_LIQUIDITY_RATE_THRESHOLD = 0.9e4;
  // Minimum health factor allowed under any circumstance
  // A value of 0.95e18 results in 0.95
  uint256 public constant MINIMUM_HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 0.95e18;
  /**
   * @dev Minimum health factor to consider a user position healthy
   * A value of 1e18 results in 1
   */
  uint256 public constant HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 1e18;
  /**
   * @dev Role identifier for the role allowed to supply isolated reserves as collateral
   */
  bytes32 public constant ISOLATED_COLLATERAL_SUPPLIER_ROLE =
    keccak256('ISOLATED_COLLATERAL_SUPPLIER');
  /**
   * @notice Validates a supply action.
   * @param reserveCache The cached data of the reserve
   * @param amount The amount to be supplied
   */
  function validateSupply(
    DataTypes.ReserveCache memory reserveCache,
    DataTypes.ReserveData storage reserve,
    uint256 amount,
    address onBehalfOf
  ) internal view {
    require(amount != 0, Errors.INVALID_AMOUNT);
    (bool isActive, bool isFrozen, , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
    require(!isFrozen, Errors.RESERVE_FROZEN);
    require(onBehalfOf != reserveCache.aTokenAddress, Errors.SUPPLY_TO_ATOKEN);
    uint256 supplyCap = reserveCache.reserveConfiguration.getSupplyCap();
    require(
      supplyCap == 0 ||
        ((IAToken(reserveCache.aTokenAddress).scaledTotalSupply() +
          uint256(reserve.accruedToTreasury)).rayMul(reserveCache.nextLiquidityIndex) + amount) <=
        supplyCap * (10 ** reserveCache.reserveConfiguration.getDecimals()),
      Errors.SUPPLY_CAP_EXCEEDED
    );
  }
  /**
   * @notice Validates a withdraw action.
   * @param reserveCache The cached data of the reserve
   * @param amount The amount to be withdrawn
   * @param userBalance The balance of the user
   */
  function validateWithdraw(
    DataTypes.ReserveCache memory reserveCache,
    uint256 amount,
    uint256 userBalance
  ) internal pure {
    require(amount != 0, Errors.INVALID_AMOUNT);
    require(amount <= userBalance, Errors.NOT_ENOUGH_AVAILABLE_USER_BALANCE);
    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
  }
  struct ValidateBorrowLocalVars {
    uint256 currentLtv;
    uint256 collateralNeededInBaseCurrency;
    uint256 userCollateralInBaseCurrency;
    uint256 userDebtInBaseCurrency;
    uint256 availableLiquidity;
    uint256 healthFactor;
    uint256 totalDebt;
    uint256 totalSupplyVariableDebt;
    uint256 reserveDecimals;
    uint256 borrowCap;
    uint256 amountInBaseCurrency;
    uint256 assetUnit;
    address siloedBorrowingAddress;
    bool isActive;
    bool isFrozen;
    bool isPaused;
    bool borrowingEnabled;
    bool siloedBorrowingEnabled;
  }
  /**
   * @notice Validates a borrow action.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional params needed for the validation
   */
  function validateBorrow(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.ValidateBorrowParams memory params
  ) internal view {
    require(params.amount != 0, Errors.INVALID_AMOUNT);
    ValidateBorrowLocalVars memory vars;
    (vars.isActive, vars.isFrozen, vars.borrowingEnabled, vars.isPaused) = params
      .reserveCache
      .reserveConfiguration
      .getFlags();
    require(vars.isActive, Errors.RESERVE_INACTIVE);
    require(!vars.isPaused, Errors.RESERVE_PAUSED);
    require(!vars.isFrozen, Errors.RESERVE_FROZEN);
    require(vars.borrowingEnabled, Errors.BORROWING_NOT_ENABLED);
    require(
      !params.reserveCache.reserveConfiguration.getIsVirtualAccActive() ||
        IERC20(params.reserveCache.aTokenAddress).totalSupply() >= params.amount,
      Errors.INVALID_AMOUNT
    );
    require(
      params.priceOracleSentinel == address(0) ||
        IPriceOracleSentinel(params.priceOracleSentinel).isBorrowAllowed(),
      Errors.PRICE_ORACLE_SENTINEL_CHECK_FAILED
    );
    //validate interest rate mode
    require(
      params.interestRateMode == DataTypes.InterestRateMode.VARIABLE,
      Errors.INVALID_INTEREST_RATE_MODE_SELECTED
    );
    vars.reserveDecimals = params.reserveCache.reserveConfiguration.getDecimals();
    vars.borrowCap = params.reserveCache.reserveConfiguration.getBorrowCap();
    unchecked {
      vars.assetUnit = 10 ** vars.reserveDecimals;
    }
    if (vars.borrowCap != 0) {
      vars.totalSupplyVariableDebt = params.reserveCache.currScaledVariableDebt.rayMul(
        params.reserveCache.nextVariableBorrowIndex
      );
      vars.totalDebt = vars.totalSupplyVariableDebt + params.amount;
      unchecked {
        require(vars.totalDebt <= vars.borrowCap * vars.assetUnit, Errors.BORROW_CAP_EXCEEDED);
      }
    }
    if (params.isolationModeActive) {
      // check that the asset being borrowed is borrowable in isolation mode AND
      // the total exposure is no bigger than the collateral debt ceiling
      require(
        params.reserveCache.reserveConfiguration.getBorrowableInIsolation(),
        Errors.ASSET_NOT_BORROWABLE_IN_ISOLATION
      );
      require(
        reservesData[params.isolationModeCollateralAddress].isolationModeTotalDebt +
          (params.amount /
            10 ** (vars.reserveDecimals - ReserveConfiguration.DEBT_CEILING_DECIMALS))
            .toUint128() <=
          params.isolationModeDebtCeiling,
        Errors.DEBT_CEILING_EXCEEDED
      );
    }
    if (params.userEModeCategory != 0) {
      require(
        EModeConfiguration.isReserveEnabledOnBitmap(
          eModeCategories[params.userEModeCategory].borrowableBitmap,
          reservesData[params.asset].id
        ),
        Errors.NOT_BORROWABLE_IN_EMODE
      );
    }
    (
      vars.userCollateralInBaseCurrency,
      vars.userDebtInBaseCurrency,
      vars.currentLtv,
      ,
      vars.healthFactor,
    ) = GenericLogic.calculateUserAccountData(
      reservesData,
      reservesList,
      eModeCategories,
      DataTypes.CalculateUserAccountDataParams({
        userConfig: params.userConfig,
        reservesCount: params.reservesCount,
        user: params.userAddress,
        oracle: params.oracle,
        userEModeCategory: params.userEModeCategory
      })
    );
    require(vars.userCollateralInBaseCurrency != 0, Errors.COLLATERAL_BALANCE_IS_ZERO);
    require(vars.currentLtv != 0, Errors.LTV_VALIDATION_FAILED);
    require(
      vars.healthFactor > HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
    );
    vars.amountInBaseCurrency =
      IPriceOracleGetter(params.oracle).getAssetPrice(params.asset) *
      params.amount;
    unchecked {
      vars.amountInBaseCurrency /= vars.assetUnit;
    }
    //add the current already borrowed amount to the amount requested to calculate the total collateral needed.
    vars.collateralNeededInBaseCurrency = (vars.userDebtInBaseCurrency + vars.amountInBaseCurrency)
      .percentDiv(vars.currentLtv); //LTV is calculated in percentage
    require(
      vars.collateralNeededInBaseCurrency <= vars.userCollateralInBaseCurrency,
      Errors.COLLATERAL_CANNOT_COVER_NEW_BORROW
    );
    if (params.userConfig.isBorrowingAny()) {
      (vars.siloedBorrowingEnabled, vars.siloedBorrowingAddress) = params
        .userConfig
        .getSiloedBorrowingState(reservesData, reservesList);
      if (vars.siloedBorrowingEnabled) {
        require(vars.siloedBorrowingAddress == params.asset, Errors.SILOED_BORROWING_VIOLATION);
      } else {
        require(
          !params.reserveCache.reserveConfiguration.getSiloedBorrowing(),
          Errors.SILOED_BORROWING_VIOLATION
        );
      }
    }
  }
  /**
   * @notice Validates a repay action.
   * @param reserveCache The cached data of the reserve
   * @param amountSent The amount sent for the repayment. Can be an actual value or uint(-1)
   * @param onBehalfOf The address of the user msg.sender is repaying for
   * @param debt The borrow balance of the user
   */
  function validateRepay(
    DataTypes.ReserveCache memory reserveCache,
    uint256 amountSent,
    DataTypes.InterestRateMode interestRateMode,
    address onBehalfOf,
    uint256 debt
  ) internal view {
    require(amountSent != 0, Errors.INVALID_AMOUNT);
    require(
      interestRateMode == DataTypes.InterestRateMode.VARIABLE,
      Errors.INVALID_INTEREST_RATE_MODE_SELECTED
    );
    require(
      amountSent != type(uint256).max || msg.sender == onBehalfOf,
      Errors.NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF
    );
    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
    require(debt != 0, Errors.NO_DEBT_OF_SELECTED_TYPE);
  }
  /**
   * @notice Validates the action of setting an asset as collateral.
   * @param reserveCache The cached data of the reserve
   * @param userBalance The balance of the user
   */
  function validateSetUseReserveAsCollateral(
    DataTypes.ReserveCache memory reserveCache,
    uint256 userBalance
  ) internal pure {
    require(userBalance != 0, Errors.UNDERLYING_BALANCE_ZERO);
    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
  }
  /**
   * @notice Validates a flashloan action.
   * @param reservesData The state of all the reserves
   * @param assets The assets being flash-borrowed
   * @param amounts The amounts for each asset being borrowed
   */
  function validateFlashloan(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    address[] memory assets,
    uint256[] memory amounts
  ) internal view {
    require(assets.length == amounts.length, Errors.INCONSISTENT_FLASHLOAN_PARAMS);
    for (uint256 i = 0; i < assets.length; i++) {
      for (uint256 j = i + 1; j < assets.length; j++) {
        require(assets[i] != assets[j], Errors.INCONSISTENT_FLASHLOAN_PARAMS);
      }
      validateFlashloanSimple(reservesData[assets[i]], amounts[i]);
    }
  }
  /**
   * @notice Validates a flashloan action.
   * @param reserve The state of the reserve
   */
  function validateFlashloanSimple(
    DataTypes.ReserveData storage reserve,
    uint256 amount
  ) internal view {
    DataTypes.ReserveConfigurationMap memory configuration = reserve.configuration;
    require(!configuration.getPaused(), Errors.RESERVE_PAUSED);
    require(configuration.getActive(), Errors.RESERVE_INACTIVE);
    require(configuration.getFlashLoanEnabled(), Errors.FLASHLOAN_DISABLED);
    require(
      !configuration.getIsVirtualAccActive() ||
        IERC20(reserve.aTokenAddress).totalSupply() >= amount,
      Errors.INVALID_AMOUNT
    );
  }
  struct ValidateLiquidationCallLocalVars {
    bool collateralReserveActive;
    bool collateralReservePaused;
    bool principalReserveActive;
    bool principalReservePaused;
    bool isCollateralEnabled;
  }
  /**
   * @notice Validates the liquidation action.
   * @param userConfig The user configuration mapping
   * @param collateralReserve The reserve data of the collateral
   * @param debtReserve The reserve data of the debt
   * @param params Additional parameters needed for the validation
   */
  function validateLiquidationCall(
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveData storage collateralReserve,
    DataTypes.ReserveData storage debtReserve,
    DataTypes.ValidateLiquidationCallParams memory params
  ) internal view {
    ValidateLiquidationCallLocalVars memory vars;
    (vars.collateralReserveActive, , , vars.collateralReservePaused) = collateralReserve
      .configuration
      .getFlags();
    (vars.principalReserveActive, , , vars.principalReservePaused) = params
      .debtReserveCache
      .reserveConfiguration
      .getFlags();
    require(vars.collateralReserveActive && vars.principalReserveActive, Errors.RESERVE_INACTIVE);
    require(!vars.collateralReservePaused && !vars.principalReservePaused, Errors.RESERVE_PAUSED);
    require(
      params.priceOracleSentinel == address(0) ||
        params.healthFactor < MINIMUM_HEALTH_FACTOR_LIQUIDATION_THRESHOLD ||
        IPriceOracleSentinel(params.priceOracleSentinel).isLiquidationAllowed(),
      Errors.PRICE_ORACLE_SENTINEL_CHECK_FAILED
    );
    require(
      collateralReserve.liquidationGracePeriodUntil < uint40(block.timestamp) &&
        debtReserve.liquidationGracePeriodUntil < uint40(block.timestamp),
      Errors.LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED
    );
    require(
      params.healthFactor < HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_NOT_BELOW_THRESHOLD
    );
    vars.isCollateralEnabled =
      collateralReserve.configuration.getLiquidationThreshold() != 0 &&
      userConfig.isUsingAsCollateral(collateralReserve.id);
    //if collateral isn't enabled as collateral by user, it cannot be liquidated
    require(vars.isCollateralEnabled, Errors.COLLATERAL_CANNOT_BE_LIQUIDATED);
    require(params.totalDebt != 0, Errors.SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER);
  }
  /**
   * @notice Validates the health factor of a user.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The state of the user for the specific reserve
   * @param user The user to validate health factor of
   * @param userEModeCategory The users active efficiency mode category
   * @param reservesCount The number of available reserves
   * @param oracle The price oracle
   */
  function validateHealthFactor(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    address user,
    uint8 userEModeCategory,
    uint256 reservesCount,
    address oracle
  ) internal view returns (uint256, bool) {
    (, , , , uint256 healthFactor, bool hasZeroLtvCollateral) = GenericLogic
      .calculateUserAccountData(
        reservesData,
        reservesList,
        eModeCategories,
        DataTypes.CalculateUserAccountDataParams({
          userConfig: userConfig,
          reservesCount: reservesCount,
          user: user,
          oracle: oracle,
          userEModeCategory: userEModeCategory
        })
      );
    require(
      healthFactor >= HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
    );
    return (healthFactor, hasZeroLtvCollateral);
  }
  /**
   * @notice Validates the health factor of a user and the ltv of the asset being withdrawn.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The state of the user for the specific reserve
   * @param asset The asset for which the ltv will be validated
   * @param from The user from which the aTokens are being transferred
   * @param reservesCount The number of available reserves
   * @param oracle The price oracle
   * @param userEModeCategory The users active efficiency mode category
   */
  function validateHFAndLtv(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    address asset,
    address from,
    uint256 reservesCount,
    address oracle,
    uint8 userEModeCategory
  ) internal view {
    DataTypes.ReserveData memory reserve = reservesData[asset];
    (, bool hasZeroLtvCollateral) = validateHealthFactor(
      reservesData,
      reservesList,
      eModeCategories,
      userConfig,
      from,
      userEModeCategory,
      reservesCount,
      oracle
    );
    require(
      !hasZeroLtvCollateral || reserve.configuration.getLtv() == 0,
      Errors.LTV_VALIDATION_FAILED
    );
  }
  /**
   * @notice Validates a transfer action.
   * @param reserve The reserve object
   */
  function validateTransfer(DataTypes.ReserveData storage reserve) internal view {
    require(!reserve.configuration.getPaused(), Errors.RESERVE_PAUSED);
  }
  /**
   * @notice Validates a drop reserve action.
   * @param reservesList The addresses of all the active reserves
   * @param reserve The reserve object
   * @param asset The address of the reserve's underlying asset
   */
  function validateDropReserve(
    mapping(uint256 => address) storage reservesList,
    DataTypes.ReserveData storage reserve,
    address asset
  ) internal view {
    require(asset != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    require(reserve.id != 0 || reservesList[0] == asset, Errors.ASSET_NOT_LISTED);
    require(
      IERC20(reserve.variableDebtTokenAddress).totalSupply() == 0,
      Errors.VARIABLE_DEBT_SUPPLY_NOT_ZERO
    );
    require(
      IERC20(reserve.aTokenAddress).totalSupply() == 0 && reserve.accruedToTreasury == 0,
      Errors.UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO
    );
  }
  /**
   * @notice Validates the action of setting efficiency mode.
   * @param eModeCategories a mapping storing configurations for all efficiency mode categories
   * @param userConfig the user configuration
   * @param reservesCount The total number of valid reserves
   * @param categoryId The id of the category
   */
  function validateSetUserEMode(
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    uint256 reservesCount,
    uint8 categoryId
  ) internal view {
    DataTypes.EModeCategory storage eModeCategory = eModeCategories[categoryId];
    // category is invalid if the liq threshold is not set
    require(
      categoryId == 0 || eModeCategory.liquidationThreshold != 0,
      Errors.INCONSISTENT_EMODE_CATEGORY
    );
    // eMode can always be enabled if the user hasn't supplied anything
    if (userConfig.isEmpty()) {
      return;
    }
    // if user is trying to set another category than default we require that
    // either the user is not borrowing, or it's borrowing assets of categoryId
    if (categoryId != 0) {
      unchecked {
        for (uint256 i = 0; i < reservesCount; i++) {
          if (userConfig.isBorrowing(i)) {
            require(
              EModeConfiguration.isReserveEnabledOnBitmap(eModeCategory.borrowableBitmap, i),
              Errors.NOT_BORROWABLE_IN_EMODE
            );
          }
        }
      }
    }
  }
  /**
   * @notice Validates the action of activating the asset as collateral.
   * @dev Only possible if the asset has non-zero LTV and the user is not in isolation mode
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig the user configuration
   * @param reserveConfig The reserve configuration
   * @return True if the asset can be activated as collateral, false otherwise
   */
  function validateUseAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveConfigurationMap memory reserveConfig
  ) internal view returns (bool) {
    if (reserveConfig.getLtv() == 0) {
      return false;
    }
    if (!userConfig.isUsingAsCollateralAny()) {
      return true;
    }
    (bool isolationModeActive, , ) = userConfig.getIsolationModeState(reservesData, reservesList);
    return (!isolationModeActive && reserveConfig.getDebtCeiling() == 0);
  }
  /**
   * @notice Validates if an asset should be automatically activated as collateral in the following actions: supply,
   * transfer, mint unbacked, and liquidate
   * @dev This is used to ensure that isolated assets are not enabled as collateral automatically
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig the user configuration
   * @param reserveConfig The reserve configuration
   * @return True if the asset can be activated as collateral, false otherwise
   */
  function validateAutomaticUseAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveConfigurationMap memory reserveConfig,
    address aTokenAddress
  ) internal view returns (bool) {
    if (reserveConfig.getDebtCeiling() != 0) {
      // ensures only the ISOLATED_COLLATERAL_SUPPLIER_ROLE can enable collateral as side-effect of an action
      IPoolAddressesProvider addressesProvider = IncentivizedERC20(aTokenAddress)
        .POOL()
        .ADDRESSES_PROVIDER();
      if (
        !IAccessControl(addressesProvider.getACLManager()).hasRole(
          ISOLATED_COLLATERAL_SUPPLIER_ROLE,
          msg.sender
        )
      ) return false;
    }
    return validateUseAsCollateral(reservesData, reservesList, userConfig, reserveConfig);
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {MathUtils} from '../math/MathUtils.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
/**
 * @title ReserveLogic library
 * @author Aave
 * @notice Implements the logic to update the reserves state
 */
library ReserveLogic {
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  using ReserveLogic for DataTypes.ReserveData;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  // See `IPool` for descriptions
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @notice Returns the ongoing normalized income for the reserve.
   * @dev A value of 1e27 means there is no income. As time passes, the income is accrued
   * @dev A value of 2*1e27 means for each unit of asset one unit of income has been accrued
   * @param reserve The reserve object
   * @return The normalized income, expressed in ray
   */
  function getNormalizedIncome(
    DataTypes.ReserveData storage reserve
  ) internal view returns (uint256) {
    uint40 timestamp = reserve.lastUpdateTimestamp;
    //solium-disable-next-line
    if (timestamp == block.timestamp) {
      //if the index was updated in the same block, no need to perform any calculation
      return reserve.liquidityIndex;
    } else {
      return
        MathUtils.calculateLinearInterest(reserve.currentLiquidityRate, timestamp).rayMul(
          reserve.liquidityIndex
        );
    }
  }
  /**
   * @notice Returns the ongoing normalized variable debt for the reserve.
   * @dev A value of 1e27 means there is no debt. As time passes, the debt is accrued
   * @dev A value of 2*1e27 means that for each unit of debt, one unit worth of interest has been accumulated
   * @param reserve The reserve object
   * @return The normalized variable debt, expressed in ray
   */
  function getNormalizedDebt(
    DataTypes.ReserveData storage reserve
  ) internal view returns (uint256) {
    uint40 timestamp = reserve.lastUpdateTimestamp;
    //solium-disable-next-line
    if (timestamp == block.timestamp) {
      //if the index was updated in the same block, no need to perform any calculation
      return reserve.variableBorrowIndex;
    } else {
      return
        MathUtils.calculateCompoundedInterest(reserve.currentVariableBorrowRate, timestamp).rayMul(
          reserve.variableBorrowIndex
        );
    }
  }
  /**
   * @notice Updates the liquidity cumulative index and the variable borrow index.
   * @param reserve The reserve object
   * @param reserveCache The caching layer for the reserve data
   */
  function updateState(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    // If time didn't pass since last stored timestamp, skip state update
    //solium-disable-next-line
    if (reserve.lastUpdateTimestamp == uint40(block.timestamp)) {
      return;
    }
    _updateIndexes(reserve, reserveCache);
    _accrueToTreasury(reserve, reserveCache);
    //solium-disable-next-line
    reserve.lastUpdateTimestamp = uint40(block.timestamp);
  }
  /**
   * @notice Accumulates a predefined amount of asset to the reserve as a fixed, instantaneous income. Used for example
   * to accumulate the flashloan fee to the reserve, and spread it between all the suppliers.
   * @param reserve The reserve object
   * @param totalLiquidity The total liquidity available in the reserve
   * @param amount The amount to accumulate
   * @return The next liquidity index of the reserve
   */
  function cumulateToLiquidityIndex(
    DataTypes.ReserveData storage reserve,
    uint256 totalLiquidity,
    uint256 amount
  ) internal returns (uint256) {
    //next liquidity index is calculated this way: `((amount / totalLiquidity) + 1) * liquidityIndex`
    //division `amount / totalLiquidity` done in ray for precision
    uint256 result = (amount.wadToRay().rayDiv(totalLiquidity.wadToRay()) + WadRayMath.RAY).rayMul(
      reserve.liquidityIndex
    );
    reserve.liquidityIndex = result.toUint128();
    return result;
  }
  /**
   * @notice Initializes a reserve.
   * @param reserve The reserve object
   * @param aTokenAddress The address of the overlying atoken contract
   * @param variableDebtTokenAddress The address of the overlying variable debt token contract
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function init(
    DataTypes.ReserveData storage reserve,
    address aTokenAddress,
    address variableDebtTokenAddress,
    address interestRateStrategyAddress
  ) internal {
    require(reserve.aTokenAddress == address(0), Errors.RESERVE_ALREADY_INITIALIZED);
    reserve.liquidityIndex = uint128(WadRayMath.RAY);
    reserve.variableBorrowIndex = uint128(WadRayMath.RAY);
    reserve.aTokenAddress = aTokenAddress;
    reserve.variableDebtTokenAddress = variableDebtTokenAddress;
    reserve.interestRateStrategyAddress = interestRateStrategyAddress;
  }
  /**
   * @notice Updates the reserve current variable borrow rate and the current liquidity rate.
   * @param reserve The reserve reserve to be updated
   * @param reserveCache The caching layer for the reserve data
   * @param reserveAddress The address of the reserve to be updated
   * @param liquidityAdded The amount of liquidity added to the protocol (supply or repay) in the previous action
   * @param liquidityTaken The amount of liquidity taken from the protocol (redeem or borrow)
   */
  function updateInterestRatesAndVirtualBalance(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache,
    address reserveAddress,
    uint256 liquidityAdded,
    uint256 liquidityTaken
  ) internal {
    uint256 totalVariableDebt = reserveCache.nextScaledVariableDebt.rayMul(
      reserveCache.nextVariableBorrowIndex
    );
    (uint256 nextLiquidityRate, uint256 nextVariableRate) = IReserveInterestRateStrategy(
      reserve.interestRateStrategyAddress
    ).calculateInterestRates(
        DataTypes.CalculateInterestRatesParams({
          unbacked: reserve.unbacked,
          liquidityAdded: liquidityAdded,
          liquidityTaken: liquidityTaken,
          totalDebt: totalVariableDebt,
          reserveFactor: reserveCache.reserveFactor,
          reserve: reserveAddress,
          usingVirtualBalance: reserve.configuration.getIsVirtualAccActive(),
          virtualUnderlyingBalance: reserve.virtualUnderlyingBalance
        })
      );
    reserve.currentLiquidityRate = nextLiquidityRate.toUint128();
    reserve.currentVariableBorrowRate = nextVariableRate.toUint128();
    // Only affect virtual balance if the reserve uses it
    if (reserve.configuration.getIsVirtualAccActive()) {
      if (liquidityAdded > 0) {
        reserve.virtualUnderlyingBalance += liquidityAdded.toUint128();
      }
      if (liquidityTaken > 0) {
        reserve.virtualUnderlyingBalance -= liquidityTaken.toUint128();
      }
    }
    emit ReserveDataUpdated(
      reserveAddress,
      nextLiquidityRate,
      0,
      nextVariableRate,
      reserveCache.nextLiquidityIndex,
      reserveCache.nextVariableBorrowIndex
    );
  }
  /**
   * @notice Mints part of the repaid interest to the reserve treasury as a function of the reserve factor for the
   * specific asset.
   * @param reserve The reserve to be updated
   * @param reserveCache The caching layer for the reserve data
   */
  function _accrueToTreasury(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    if (reserveCache.reserveFactor == 0) {
      return;
    }
    //calculate the total variable debt at moment of the last interaction
    uint256 prevTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
      reserveCache.currVariableBorrowIndex
    );
    //calculate the new total variable debt after accumulation of the interest on the index
    uint256 currTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
      reserveCache.nextVariableBorrowIndex
    );
    //debt accrued is the sum of the current debt minus the sum of the debt at the last update
    uint256 totalDebtAccrued = currTotalVariableDebt - prevTotalVariableDebt;
    uint256 amountToMint = totalDebtAccrued.percentMul(reserveCache.reserveFactor);
    if (amountToMint != 0) {
      reserve.accruedToTreasury += amountToMint.rayDiv(reserveCache.nextLiquidityIndex).toUint128();
    }
  }
  /**
   * @notice Updates the reserve indexes and the timestamp of the update.
   * @param reserve The reserve reserve to be updated
   * @param reserveCache The cache layer holding the cached protocol data
   */
  function _updateIndexes(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    // Only cumulating on the supply side if there is any income being produced
    // The case of Reserve Factor 100% is not a problem (currentLiquidityRate == 0),
    // as liquidity index should not be updated
    if (reserveCache.currLiquidityRate != 0) {
      uint256 cumulatedLiquidityInterest = MathUtils.calculateLinearInterest(
        reserveCache.currLiquidityRate,
        reserveCache.reserveLastUpdateTimestamp
      );
      reserveCache.nextLiquidityIndex = cumulatedLiquidityInterest.rayMul(
        reserveCache.currLiquidityIndex
      );
      reserve.liquidityIndex = reserveCache.nextLiquidityIndex.toUint128();
    }
    // Variable borrow index only gets updated if there is any variable debt.
    // reserveCache.currVariableBorrowRate != 0 is not a correct validation,
    // because a positive base variable rate can be stored on
    // reserveCache.currVariableBorrowRate, but the index should not increase
    if (reserveCache.currScaledVariableDebt != 0) {
      uint256 cumulatedVariableBorrowInterest = MathUtils.calculateCompoundedInterest(
        reserveCache.currVariableBorrowRate,
        reserveCache.reserveLastUpdateTimestamp
      );
      reserveCache.nextVariableBorrowIndex = cumulatedVariableBorrowInterest.rayMul(
        reserveCache.currVariableBorrowIndex
      );
      reserve.variableBorrowIndex = reserveCache.nextVariableBorrowIndex.toUint128();
    }
  }
  /**
   * @notice Creates a cache object to avoid repeated storage reads and external contract calls when updating state and
   * interest rates.
   * @param reserve The reserve object for which the cache will be filled
   * @return The cache object
   */
  function cache(
    DataTypes.ReserveData storage reserve
  ) internal view returns (DataTypes.ReserveCache memory) {
    DataTypes.ReserveCache memory reserveCache;
    reserveCache.reserveConfiguration = reserve.configuration;
    reserveCache.reserveFactor = reserveCache.reserveConfiguration.getReserveFactor();
    reserveCache.currLiquidityIndex = reserveCache.nextLiquidityIndex = reserve.liquidityIndex;
    reserveCache.currVariableBorrowIndex = reserveCache.nextVariableBorrowIndex = reserve
      .variableBorrowIndex;
    reserveCache.currLiquidityRate = reserve.currentLiquidityRate;
    reserveCache.currVariableBorrowRate = reserve.currentVariableBorrowRate;
    reserveCache.aTokenAddress = reserve.aTokenAddress;
    reserveCache.variableDebtTokenAddress = reserve.variableDebtTokenAddress;
    reserveCache.reserveLastUpdateTimestamp = reserve.lastUpdateTimestamp;
    reserveCache.currScaledVariableDebt = reserveCache.nextScaledVariableDebt = IVariableDebtToken(
      reserveCache.variableDebtTokenAddress
    ).scaledTotalSupply();
    return reserveCache;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 internal constant LTV_MASK =                       0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
  uint256 internal constant LIQUIDATION_THRESHOLD_MASK =     0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_BONUS_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
  uint256 internal constant DECIMALS_MASK =                  0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant ACTIVE_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FROZEN_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWING_MASK =                 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant PAUSED_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWABLE_IN_ISOLATION_MASK =   0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SILOED_BORROWING_MASK =          0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FLASHLOAN_ENABLED_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant RESERVE_FACTOR_MASK =            0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROW_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SUPPLY_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK =  0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_MASK =         0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant DEBT_CEILING_MASK =              0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant VIRTUAL_ACC_ACTIVE_MASK =        0xEFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
  uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
  uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
  uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
  uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
  uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
  uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
  uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;
  uint256 internal constant VIRTUAL_ACC_START_BIT_POSITION = 252;
  uint256 internal constant MAX_VALID_LTV = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 internal constant MAX_VALID_DECIMALS = 255;
  uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
  uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
  uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
  uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
  uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
  uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;
  uint256 public constant DEBT_CEILING_DECIMALS = 2;
  uint16 public constant MAX_RESERVES_COUNT = 128;
  /**
   * @notice Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv The new ltv
   */
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);
    self.data = (self.data & LTV_MASK) | ltv;
  }
  /**
   * @notice Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   */
  function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
    return self.data & ~LTV_MASK;
  }
  /**
   * @notice Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   */
  function setLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 threshold
  ) internal pure {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);
    self.data =
      (self.data & LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }
  /**
   * @notice Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   */
  function getLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }
  /**
   * @notice Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   */
  function setLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 bonus
  ) internal pure {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);
    self.data =
      (self.data & LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }
  /**
   * @notice Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   */
  function getLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }
  /**
   * @notice Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   */
  function setDecimals(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 decimals
  ) internal pure {
    require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);
    self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }
  /**
   * @notice Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   */
  function getDecimals(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }
  /**
   * @notice Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }
  /**
   * @notice Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   */
  function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~ACTIVE_MASK) != 0;
  }
  /**
   * @notice Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   */
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }
  /**
   * @notice Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   */
  function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~FROZEN_MASK) != 0;
  }
  /**
   * @notice Sets the paused state of the reserve
   * @param self The reserve configuration
   * @param paused The paused state
   */
  function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
    self.data =
      (self.data & PAUSED_MASK) |
      (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the paused state of the reserve
   * @param self The reserve configuration
   * @return The paused state
   */
  function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~PAUSED_MASK) != 0;
  }
  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
   * amount will be accumulated in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @param borrowable True if the asset is borrowable
   */
  function setBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self,
    bool borrowable
  ) internal pure {
    self.data =
      (self.data & BORROWABLE_IN_ISOLATION_MASK) |
      (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrowable in isolation flag for the reserve.
   * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
   * isolated collateral is accounted for in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @return The borrowable in isolation flag
   */
  function getBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0;
  }
  /**
   * @notice Sets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @param siloed True if the asset is siloed
   */
  function setSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self,
    bool siloed
  ) internal pure {
    self.data =
      (self.data & SILOED_BORROWING_MASK) |
      (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
  }
  /**
   * @notice Gets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @return The siloed borrowing flag
   */
  function getSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~SILOED_BORROWING_MASK) != 0;
  }
  /**
   * @notice Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   */
  function setBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   */
  function getBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWING_MASK) != 0;
  }
  /**
   * @notice Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   */
  function setReserveFactor(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 reserveFactor
  ) internal pure {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);
    self.data =
      (self.data & RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }
  /**
   * @notice Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   */
  function getReserveFactor(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }
  /**
   * @notice Sets the borrow cap of the reserve
   * @param self The reserve configuration
   * @param borrowCap The borrow cap
   */
  function setBorrowCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 borrowCap
  ) internal pure {
    require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);
    self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
  }
  /**
   * @notice Gets the borrow cap of the reserve
   * @param self The reserve configuration
   * @return The borrow cap
   */
  function getBorrowCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the supply cap of the reserve
   * @param self The reserve configuration
   * @param supplyCap The supply cap
   */
  function setSupplyCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 supplyCap
  ) internal pure {
    require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);
    self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
  }
  /**
   * @notice Gets the supply cap of the reserve
   * @param self The reserve configuration
   * @return The supply cap
   */
  function getSupplyCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the debt ceiling in isolation mode for the asset
   * @param self The reserve configuration
   * @param ceiling The maximum debt ceiling for the asset
   */
  function setDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 ceiling
  ) internal pure {
    require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);
    self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
  }
  /**
   * @notice Gets the debt ceiling for the asset if the asset is in isolation mode
   * @param self The reserve configuration
   * @return The debt ceiling (0 = isolation mode disabled)
   */
  function getDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
  }
  /**
   * @notice Sets the liquidation protocol fee of the reserve
   * @param self The reserve configuration
   * @param liquidationProtocolFee The liquidation protocol fee
   */
  function setLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 liquidationProtocolFee
  ) internal pure {
    require(
      liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
      Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
    );
    self.data =
      (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) |
      (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
  }
  /**
   * @dev Gets the liquidation protocol fee
   * @param self The reserve configuration
   * @return The liquidation protocol fee
   */
  function getLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return
      (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
  }
  /**
   * @notice Sets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @param unbackedMintCap The unbacked mint cap
   */
  function setUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 unbackedMintCap
  ) internal pure {
    require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);
    self.data =
      (self.data & UNBACKED_MINT_CAP_MASK) |
      (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
  }
  /**
   * @dev Gets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @return The unbacked mint cap
   */
  function getUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
  }
  /**
   * @notice Sets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @param flashLoanEnabled True if the asset is flashloanable, false otherwise
   */
  function setFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool flashLoanEnabled
  ) internal pure {
    self.data =
      (self.data & FLASHLOAN_ENABLED_MASK) |
      (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
  }
  /**
   * @notice Gets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @return The flashloanable flag
   */
  function getFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0;
  }
  /**
   * @notice Sets the virtual account active/not state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self,
    bool active
  ) internal pure {
    self.data =
      (self.data & VIRTUAL_ACC_ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << VIRTUAL_ACC_START_BIT_POSITION);
  }
  /**
   * @notice Gets the virtual account active/not state of the reserve
   * @dev The state should be true for all normal assets and should be false
   *  only in special cases (ex. GHO) where an asset is minted instead of supplied.
   * @param self The reserve configuration
   * @return The active state
   */
  function getIsVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~VIRTUAL_ACC_ACTIVE_MASK) != 0;
  }
  /**
   * @notice Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flag representing active
   * @return The state flag representing frozen
   * @return The state flag representing borrowing enabled
   * @return The state flag representing paused
   */
  function getFlags(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool, bool, bool, bool) {
    uint256 dataLocal = self.data;
    return (
      (dataLocal & ~ACTIVE_MASK) != 0,
      (dataLocal & ~FROZEN_MASK) != 0,
      (dataLocal & ~BORROWING_MASK) != 0,
      (dataLocal & ~PAUSED_MASK) != 0
    );
  }
  /**
   * @notice Gets the configuration parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing ltv
   * @return The state param representing liquidation threshold
   * @return The state param representing liquidation bonus
   * @return The state param representing reserve decimals
   * @return The state param representing reserve factor
   */
  function getParams(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256, uint256, uint256, uint256) {
    uint256 dataLocal = self.data;
    return (
      dataLocal & ~LTV_MASK,
      (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }
  /**
   * @notice Gets the caps parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing borrow cap
   * @return The state param representing supply cap.
   */
  function getCaps(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256) {
    uint256 dataLocal = self.data;
    return (
      (dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
      (dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
    );
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);
  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);
  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize, which returns 0 for contracts in
    // construction, since the code is only stored at the end of the
    // constructor execution.
    uint256 size;
    assembly {
      size := extcodesize(account)
    }
    return size > 0;
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }
  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCall(target, data, 'Address: low-level call failed');
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
  }
  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, 'Address: insufficient balance for call');
    require(isContract(target), 'Address: call to non-contract');
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResult(success, returndata, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data
  ) internal view returns (bytes memory) {
    return functionStaticCall(target, data, 'Address: low-level static call failed');
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    require(isContract(target), 'Address: static call to non-contract');
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
  }
  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(isContract(target), 'Address: delegate call to non-contract');
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }
  /**
   * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      // Look for revert reason and bubble it up if present
      if (returndata.length > 0) {
        // The easiest way to bubble the revert reason is using memory via assembly
        assembly {
          let returndata_size := mload(returndata)
          revert(add(32, returndata), returndata_size)
        }
      } else {
        revert(errorMessage);
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IReserveInterestRateStrategy
 * @author BGD Labs
 * @notice Basic interface for any rate strategy used by the Aave protocol
 */
interface IReserveInterestRateStrategy {
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The abi encoded reserve interest rate data to apply to the given reserve
   *   Abstracted this way as rate strategies can be custom
   */
  function setInterestRateParams(address reserve, bytes calldata rateData) external;
  /**
   * @notice Calculates the interest rates depending on the reserve's state and configurations
   * @param params The parameters needed to calculate interest rates
   * @return liquidityRate The liquidity rate expressed in ray
   * @return variableBorrowRate The variable borrow rate expressed in ray
   */
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view returns (uint256, uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IPriceOracleGetter
 * @author Aave
 * @notice Interface for the Aave price oracle.
 */
interface IPriceOracleGetter {
  /**
   * @notice Returns the base currency address
   * @dev Address 0x0 is reserved for USD as base currency.
   * @return Returns the base currency address.
   */
  function BASE_CURRENCY() external view returns (address);
  /**
   * @notice Returns the base currency unit
   * @dev 1 ether for ETH, 1e8 for USD.
   * @return Returns the base currency unit.
   */
  function BASE_CURRENCY_UNIT() external view returns (uint256);
  /**
   * @notice Returns the asset price in the base currency
   * @param asset The address of the asset
   * @return The price of the asset
   */
  function getAssetPrice(address asset) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IPriceOracleSentinel
 * @author Aave
 * @notice Defines the basic interface for the PriceOracleSentinel
 */
interface IPriceOracleSentinel {
  /**
   * @dev Emitted after the sequencer oracle is updated
   * @param newSequencerOracle The new sequencer oracle
   */
  event SequencerOracleUpdated(address newSequencerOracle);
  /**
   * @dev Emitted after the grace period is updated
   * @param newGracePeriod The new grace period value
   */
  event GracePeriodUpdated(uint256 newGracePeriod);
  /**
   * @notice Returns the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns true if the `borrow` operation is allowed.
   * @dev Operation not allowed when PriceOracle is down or grace period not passed.
   * @return True if the `borrow` operation is allowed, false otherwise.
   */
  function isBorrowAllowed() external view returns (bool);
  /**
   * @notice Returns true if the `liquidation` operation is allowed.
   * @dev Operation not allowed when PriceOracle is down or grace period not passed.
   * @return True if the `liquidation` operation is allowed, false otherwise.
   */
  function isLiquidationAllowed() external view returns (bool);
  /**
   * @notice Updates the address of the sequencer oracle
   * @param newSequencerOracle The address of the new Sequencer Oracle to use
   */
  function setSequencerOracle(address newSequencerOracle) external;
  /**
   * @notice Updates the duration of the grace period
   * @param newGracePeriod The value of the new grace period duration
   */
  function setGracePeriod(uint256 newGracePeriod) external;
  /**
   * @notice Returns the SequencerOracle
   * @return The address of the sequencer oracle contract
   */
  function getSequencerOracle() external view returns (address);
  /**
   * @notice Returns the grace period
   * @return The duration of the grace period
   */
  function getGracePeriod() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );
  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );
  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);
  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;
  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);
  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;
  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);
  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;
  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);
  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);
  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;
  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);
  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;
  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);
  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;
  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);
  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;
  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);
  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
  /**
   * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
   *
   * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
   * {RoleAdminChanged} not being emitted signaling this.
   *
   * _Available since v3.1._
   */
  event RoleAdminChanged(
    bytes32 indexed role,
    bytes32 indexed previousAdminRole,
    bytes32 indexed newAdminRole
  );
  /**
   * @dev Emitted when `account` is granted `role`.
   *
   * `sender` is the account that originated the contract call, an admin role
   * bearer except when using {AccessControl-_setupRole}.
   */
  event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
  /**
   * @dev Emitted when `account` is revoked `role`.
   *
   * `sender` is the account that originated the contract call:
   *   - if using `revokeRole`, it is the admin role bearer
   *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
   */
  event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
  /**
   * @dev Returns `true` if `account` has been granted `role`.
   */
  function hasRole(bytes32 role, address account) external view returns (bool);
  /**
   * @dev Returns the admin role that controls `role`. See {grantRole} and
   * {revokeRole}.
   *
   * To change a role's admin, use {AccessControl-_setRoleAdmin}.
   */
  function getRoleAdmin(bytes32 role) external view returns (bytes32);
  /**
   * @dev Grants `role` to `account`.
   *
   * If `account` had not been already granted `role`, emits a {RoleGranted}
   * event.
   *
   * Requirements:
   *
   * - the caller must have ``role``'s admin role.
   */
  function grantRole(bytes32 role, address account) external;
  /**
   * @dev Revokes `role` from `account`.
   *
   * If `account` had been granted `role`, emits a {RoleRevoked} event.
   *
   * Requirements:
   *
   * - the caller must have ``role``'s admin role.
   */
  function revokeRole(bytes32 role, address account) external;
  /**
   * @dev Revokes `role` from the calling account.
   *
   * Roles are often managed via {grantRole} and {revokeRole}: this function's
   * purpose is to provide a mechanism for accounts to lose their privileges
   * if they are compromised (such as when a trusted device is misplaced).
   *
   * If the calling account had been granted `role`, emits a {RoleRevoked}
   * event.
   *
   * Requirements:
   *
   * - the caller must be `account`.
   */
  function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';
/**
 * @title EModeConfiguration library
 * @author BGD Labs
 * @notice Implements the bitmap logic to handle the eMode configuration
 */
library EModeConfiguration {
  /**
   * @notice Sets a bit in a given bitmap that represents the reserve index range
   * @dev The supplied bitmap is supposed to be a uint128 in which each bit represents a reserve
   * @param bitmap The bitmap
   * @param reserveIndex The index of the reserve in the bitmap
   * @param enabled True if the reserveIndex should be enabled on the bitmap, false otherwise
   * @return The altered bitmap
   */
  function setReserveBitmapBit(
    uint128 bitmap,
    uint256 reserveIndex,
    bool enabled
  ) internal pure returns (uint128) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint128 bit = uint128(1 << reserveIndex);
      if (enabled) {
        return bitmap | bit;
      } else {
        return bitmap & ~bit;
      }
    }
  }
  /**
   * @notice Validates if a reserveIndex is flagged as enabled on a given bitmap
   * @param bitmap The bitmap
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the reserveindex is flagged true
   */
  function isReserveEnabledOnBitmap(
    uint128 bitmap,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (bitmap >> reserveIndex) & 1 != 0;
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {EModeConfiguration} from '../configuration/EModeConfiguration.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {EModeLogic} from './EModeLogic.sol';
/**
 * @title GenericLogic library
 * @author Aave
 * @notice Implements protocol-level logic to calculate and validate the state of a user
 */
library GenericLogic {
  using ReserveLogic for DataTypes.ReserveData;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  struct CalculateUserAccountDataVars {
    uint256 assetPrice;
    uint256 assetUnit;
    uint256 userBalanceInBaseCurrency;
    uint256 decimals;
    uint256 ltv;
    uint256 liquidationThreshold;
    uint256 i;
    uint256 healthFactor;
    uint256 totalCollateralInBaseCurrency;
    uint256 totalDebtInBaseCurrency;
    uint256 avgLtv;
    uint256 avgLiquidationThreshold;
    uint256 eModeLtv;
    uint256 eModeLiqThreshold;
    address currentReserveAddress;
    bool hasZeroLtvCollateral;
    bool isInEModeCategory;
  }
  /**
   * @notice Calculates the user data across the reserves.
   * @dev It includes the total liquidity/collateral/borrow balances in the base currency used by the price feed,
   * the average Loan To Value, the average Liquidation Ratio, and the Health factor.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional parameters needed for the calculation
   * @return The total collateral of the user in the base currency used by the price feed
   * @return The total debt of the user in the base currency used by the price feed
   * @return The average ltv of the user
   * @return The average liquidation threshold of the user
   * @return The health factor of the user
   * @return True if the ltv is zero, false otherwise
   */
  function calculateUserAccountData(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.CalculateUserAccountDataParams memory params
  ) internal view returns (uint256, uint256, uint256, uint256, uint256, bool) {
    if (params.userConfig.isEmpty()) {
      return (0, 0, 0, 0, type(uint256).max, false);
    }
    CalculateUserAccountDataVars memory vars;
    if (params.userEModeCategory != 0) {
      vars.eModeLtv = eModeCategories[params.userEModeCategory].ltv;
      vars.eModeLiqThreshold = eModeCategories[params.userEModeCategory].liquidationThreshold;
    }
    while (vars.i < params.reservesCount) {
      if (!params.userConfig.isUsingAsCollateralOrBorrowing(vars.i)) {
        unchecked {
          ++vars.i;
        }
        continue;
      }
      vars.currentReserveAddress = reservesList[vars.i];
      if (vars.currentReserveAddress == address(0)) {
        unchecked {
          ++vars.i;
        }
        continue;
      }
      DataTypes.ReserveData storage currentReserve = reservesData[vars.currentReserveAddress];
      (vars.ltv, vars.liquidationThreshold, , vars.decimals, ) = currentReserve
        .configuration
        .getParams();
      unchecked {
        vars.assetUnit = 10 ** vars.decimals;
      }
      vars.assetPrice = IPriceOracleGetter(params.oracle).getAssetPrice(vars.currentReserveAddress);
      if (vars.liquidationThreshold != 0 && params.userConfig.isUsingAsCollateral(vars.i)) {
        vars.userBalanceInBaseCurrency = _getUserBalanceInBaseCurrency(
          params.user,
          currentReserve,
          vars.assetPrice,
          vars.assetUnit
        );
        vars.totalCollateralInBaseCurrency += vars.userBalanceInBaseCurrency;
        vars.isInEModeCategory =
          params.userEModeCategory != 0 &&
          EModeConfiguration.isReserveEnabledOnBitmap(
            eModeCategories[params.userEModeCategory].collateralBitmap,
            vars.i
          );
        if (vars.ltv != 0) {
          vars.avgLtv +=
            vars.userBalanceInBaseCurrency *
            (vars.isInEModeCategory ? vars.eModeLtv : vars.ltv);
        } else {
          vars.hasZeroLtvCollateral = true;
        }
        vars.avgLiquidationThreshold +=
          vars.userBalanceInBaseCurrency *
          (vars.isInEModeCategory ? vars.eModeLiqThreshold : vars.liquidationThreshold);
      }
      if (params.userConfig.isBorrowing(vars.i)) {
        vars.totalDebtInBaseCurrency += _getUserDebtInBaseCurrency(
          params.user,
          currentReserve,
          vars.assetPrice,
          vars.assetUnit
        );
      }
      unchecked {
        ++vars.i;
      }
    }
    unchecked {
      vars.avgLtv = vars.totalCollateralInBaseCurrency != 0
        ? vars.avgLtv / vars.totalCollateralInBaseCurrency
        : 0;
      vars.avgLiquidationThreshold = vars.totalCollateralInBaseCurrency != 0
        ? vars.avgLiquidationThreshold / vars.totalCollateralInBaseCurrency
        : 0;
    }
    vars.healthFactor = (vars.totalDebtInBaseCurrency == 0)
      ? type(uint256).max
      : (vars.totalCollateralInBaseCurrency.percentMul(vars.avgLiquidationThreshold)).wadDiv(
        vars.totalDebtInBaseCurrency
      );
    return (
      vars.totalCollateralInBaseCurrency,
      vars.totalDebtInBaseCurrency,
      vars.avgLtv,
      vars.avgLiquidationThreshold,
      vars.healthFactor,
      vars.hasZeroLtvCollateral
    );
  }
  /**
   * @notice Calculates the maximum amount that can be borrowed depending on the available collateral, the total debt
   * and the average Loan To Value
   * @param totalCollateralInBaseCurrency The total collateral in the base currency used by the price feed
   * @param totalDebtInBaseCurrency The total borrow balance in the base currency used by the price feed
   * @param ltv The average loan to value
   * @return The amount available to borrow in the base currency of the used by the price feed
   */
  function calculateAvailableBorrows(
    uint256 totalCollateralInBaseCurrency,
    uint256 totalDebtInBaseCurrency,
    uint256 ltv
  ) internal pure returns (uint256) {
    uint256 availableBorrowsInBaseCurrency = totalCollateralInBaseCurrency.percentMul(ltv);
    if (availableBorrowsInBaseCurrency <= totalDebtInBaseCurrency) {
      return 0;
    }
    availableBorrowsInBaseCurrency = availableBorrowsInBaseCurrency - totalDebtInBaseCurrency;
    return availableBorrowsInBaseCurrency;
  }
  /**
   * @notice Calculates total debt of the user in the based currency used to normalize the values of the assets
   * @dev This fetches the `balanceOf` of the variable debt token for the user. For gas reasons, the
   * variable debt balance is calculated by fetching `scaledBalancesOf` normalized debt, which is cheaper than
   * fetching `balanceOf`
   * @param user The address of the user
   * @param reserve The data of the reserve for which the total debt of the user is being calculated
   * @param assetPrice The price of the asset for which the total debt of the user is being calculated
   * @param assetUnit The value representing one full unit of the asset (10^decimals)
   * @return The total debt of the user normalized to the base currency
   */
  function _getUserDebtInBaseCurrency(
    address user,
    DataTypes.ReserveData storage reserve,
    uint256 assetPrice,
    uint256 assetUnit
  ) private view returns (uint256) {
    // fetching variable debt
    uint256 userTotalDebt = IScaledBalanceToken(reserve.variableDebtTokenAddress).scaledBalanceOf(
      user
    );
    if (userTotalDebt == 0) {
      return 0;
    }
    userTotalDebt = userTotalDebt.rayMul(reserve.getNormalizedDebt()) * assetPrice;
    unchecked {
      return userTotalDebt / assetUnit;
    }
  }
  /**
   * @notice Calculates total aToken balance of the user in the based currency used by the price oracle
   * @dev For gas reasons, the aToken balance is calculated by fetching `scaledBalancesOf` normalized debt, which
   * is cheaper than fetching `balanceOf`
   * @param user The address of the user
   * @param reserve The data of the reserve for which the total aToken balance of the user is being calculated
   * @param assetPrice The price of the asset for which the total aToken balance of the user is being calculated
   * @param assetUnit The value representing one full unit of the asset (10^decimals)
   * @return The total aToken balance of the user normalized to the base currency of the price oracle
   */
  function _getUserBalanceInBaseCurrency(
    address user,
    DataTypes.ReserveData storage reserve,
    uint256 assetPrice,
    uint256 assetUnit
  ) private view returns (uint256) {
    uint256 normalizedIncome = reserve.getNormalizedIncome();
    uint256 balance = (
      IScaledBalanceToken(reserve.aTokenAddress).scaledBalanceOf(user).rayMul(normalizedIncome)
    ) * assetPrice;
    unchecked {
      return balance / assetUnit;
    }
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity ^0.8.10;
/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
    return uint224(value);
  }
  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
    return uint128(value);
  }
  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
    return uint96(value);
  }
  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
    return uint64(value);
  }
  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
    return uint32(value);
  }
  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
    return uint16(value);
  }
  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
    return uint8(value);
  }
  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    require(value >= 0, 'SafeCast: value must be positive');
    return uint256(value);
  }
  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   *
   * _Available since v3.1._
   */
  function toInt128(int256 value) internal pure returns (int128) {
    require(
      value >= type(int128).min && value <= type(int128).max,
      "SafeCast: value doesn't fit in 128 bits"
    );
    return int128(value);
  }
  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   *
   * _Available since v3.1._
   */
  function toInt64(int256 value) internal pure returns (int64) {
    require(
      value >= type(int64).min && value <= type(int64).max,
      "SafeCast: value doesn't fit in 64 bits"
    );
    return int64(value);
  }
  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   *
   * _Available since v3.1._
   */
  function toInt32(int256 value) internal pure returns (int32) {
    require(
      value >= type(int32).min && value <= type(int32).max,
      "SafeCast: value doesn't fit in 32 bits"
    );
    return int32(value);
  }
  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   *
   * _Available since v3.1._
   */
  function toInt16(int256 value) internal pure returns (int16) {
    require(
      value >= type(int16).min && value <= type(int16).max,
      "SafeCast: value doesn't fit in 16 bits"
    );
    return int16(value);
  }
  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   *
   * _Available since v3.1._
   */
  function toInt8(int256 value) internal pure returns (int8) {
    require(
      value >= type(int8).min && value <= type(int8).max,
      "SafeCast: value doesn't fit in 8 bits"
    );
    return int8(value);
  }
  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
    return int256(value);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IACLManager} from '../../../interfaces/IACLManager.sol';
/**
 * @title IncentivizedERC20
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 * @notice Basic ERC20 implementation
 */
abstract contract IncentivizedERC20 is Context, IERC20Detailed {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    IACLManager aclManager = IACLManager(_addressesProvider.getACLManager());
    require(aclManager.isPoolAdmin(msg.sender), Errors.CALLER_NOT_POOL_ADMIN);
    _;
  }
  /**
   * @dev Only pool can call functions marked by this modifier.
   */
  modifier onlyPool() {
    require(_msgSender() == address(POOL), Errors.CALLER_MUST_BE_POOL);
    _;
  }
  /**
   * @dev UserState - additionalData is a flexible field.
   * ATokens and VariableDebtTokens use this field store the index of the
   * user's last supply/withdrawal/borrow/repayment.
   */
  struct UserState {
    uint128 balance;
    uint128 additionalData;
  }
  // Map of users address and their state data (userAddress => userStateData)
  mapping(address => UserState) internal _userState;
  // Map of allowances (delegator => delegatee => allowanceAmount)
  mapping(address => mapping(address => uint256)) private _allowances;
  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  IAaveIncentivesController internal _incentivesController;
  IPoolAddressesProvider internal immutable _addressesProvider;
  IPool public immutable POOL;
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name_ The name of the token
   * @param symbol_ The symbol of the token
   * @param decimals_ The number of decimals of the token
   */
  constructor(IPool pool, string memory name_, string memory symbol_, uint8 decimals_) {
    _addressesProvider = pool.ADDRESSES_PROVIDER();
    _name = name_;
    _symbol = symbol_;
    _decimals = decimals_;
    POOL = pool;
  }
  /// @inheritdoc IERC20Detailed
  function name() public view override returns (string memory) {
    return _name;
  }
  /// @inheritdoc IERC20Detailed
  function symbol() external view override returns (string memory) {
    return _symbol;
  }
  /// @inheritdoc IERC20Detailed
  function decimals() external view override returns (uint8) {
    return _decimals;
  }
  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }
  /// @inheritdoc IERC20
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _userState[account].balance;
  }
  /**
   * @notice Returns the address of the Incentives Controller contract
   * @return The address of the Incentives Controller
   */
  function getIncentivesController() external view virtual returns (IAaveIncentivesController) {
    return _incentivesController;
  }
  /**
   * @notice Sets a new Incentives Controller
   * @param controller the new Incentives controller
   */
  function setIncentivesController(IAaveIncentivesController controller) external onlyPoolAdmin {
    _incentivesController = controller;
  }
  /// @inheritdoc IERC20
  function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _transfer(_msgSender(), recipient, castAmount);
    return true;
  }
  /// @inheritdoc IERC20
  function allowance(
    address owner,
    address spender
  ) external view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }
  /// @inheritdoc IERC20
  function approve(address spender, uint256 amount) external virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }
  /// @inheritdoc IERC20
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - castAmount);
    _transfer(sender, recipient, castAmount);
    return true;
  }
  /**
   * @notice Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   */
  function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
    return true;
  }
  /**
   * @notice Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   */
  function decreaseAllowance(
    address spender,
    uint256 subtractedValue
  ) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
    return true;
  }
  /**
   * @notice Transfers tokens between two users and apply incentives if defined.
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(address sender, address recipient, uint128 amount) internal virtual {
    uint128 oldSenderBalance = _userState[sender].balance;
    _userState[sender].balance = oldSenderBalance - amount;
    uint128 oldRecipientBalance = _userState[recipient].balance;
    _userState[recipient].balance = oldRecipientBalance + amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      incentivesControllerLocal.handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        incentivesControllerLocal.handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }
  /**
   * @notice Approve `spender` to use `amount` of `owner`s balance
   * @param owner The address owning the tokens
   * @param spender The address approved for spending
   * @param amount The amount of tokens to approve spending of
   */
  function _approve(address owner, address spender, uint256 amount) internal virtual {
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }
  /**
   * @notice Update the name of the token
   * @param newName The new name for the token
   */
  function _setName(string memory newName) internal {
    _name = newName;
  }
  /**
   * @notice Update the symbol for the token
   * @param newSymbol The new symbol for the token
   */
  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }
  /**
   * @notice Update the number of decimals for the token
   * @param newDecimals The new number of decimals for the token
   */
  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
/**
 * @title IVariableDebtToken
 * @author Aave
 * @notice Defines the basic interface for a variable debt token.
 */
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
  /**
   * @notice Mints debt token to the `onBehalfOf` address
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return True if the previous balance of the user is 0, false otherwise
   * @return The scaled total debt of the reserve
   */
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool, uint256);
  /**
   * @notice Burns user variable debt
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the debt will be burned
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   * @return The scaled total debt of the reserve
   */
  function burn(address from, uint256 amount, uint256 index) external returns (uint256);
  /**
   * @notice Returns the address of the underlying asset of this debtToken (E.g. WETH for variableDebtWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {WadRayMath} from './WadRayMath.sol';
/**
 * @title MathUtils library
 * @author Aave
 * @notice Provides functions to perform linear and compounded interest calculations
 */
library MathUtils {
  using WadRayMath for uint256;
  /// @dev Ignoring leap years
  uint256 internal constant SECONDS_PER_YEAR = 365 days;
  /**
   * @dev Function to calculate the interest accumulated using a linear interest rate formula
   * @param rate The interest rate, in ray
   * @param lastUpdateTimestamp The timestamp of the last update of the interest
   * @return The interest rate linearly accumulated during the timeDelta, in ray
   */
  function calculateLinearInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp
  ) internal view returns (uint256) {
    //solium-disable-next-line
    uint256 result = rate * (block.timestamp - uint256(lastUpdateTimestamp));
    unchecked {
      result = result / SECONDS_PER_YEAR;
    }
    return WadRayMath.RAY + result;
  }
  /**
   * @dev Function to calculate the interest using a compounded interest rate formula
   * To avoid expensive exponentiation, the calculation is performed using a binomial approximation:
   *
   *  (1+x)^n = 1+n*x+[n/2*(n-1)]*x^2+[n/6*(n-1)*(n-2)*x^3...
   *
   * The approximation slightly underpays liquidity providers and undercharges borrowers, with the advantage of great
   * gas cost reductions. The whitepaper contains reference to the approximation and a table showing the margin of
   * error per different time periods
   *
   * @param rate The interest rate, in ray
   * @param lastUpdateTimestamp The timestamp of the last update of the interest
   * @return The interest rate compounded during the timeDelta, in ray
   */
  function calculateCompoundedInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp,
    uint256 currentTimestamp
  ) internal pure returns (uint256) {
    //solium-disable-next-line
    uint256 exp = currentTimestamp - uint256(lastUpdateTimestamp);
    if (exp == 0) {
      return WadRayMath.RAY;
    }
    uint256 expMinusOne;
    uint256 expMinusTwo;
    uint256 basePowerTwo;
    uint256 basePowerThree;
    unchecked {
      expMinusOne = exp - 1;
      expMinusTwo = exp > 2 ? exp - 2 : 0;
      basePowerTwo = rate.rayMul(rate) / (SECONDS_PER_YEAR * SECONDS_PER_YEAR);
      basePowerThree = basePowerTwo.rayMul(rate) / SECONDS_PER_YEAR;
    }
    uint256 secondTerm = exp * expMinusOne * basePowerTwo;
    unchecked {
      secondTerm /= 2;
    }
    uint256 thirdTerm = exp * expMinusOne * expMinusTwo * basePowerThree;
    unchecked {
      thirdTerm /= 6;
    }
    return WadRayMath.RAY + (rate * exp) / SECONDS_PER_YEAR + secondTerm + thirdTerm;
  }
  /**
   * @dev Calculates the compounded interest between the timestamp of the last update and the current block timestamp
   * @param rate The interest rate (in ray)
   * @param lastUpdateTimestamp The timestamp from which the interest accumulation needs to be calculated
   * @return The interest rate compounded between lastUpdateTimestamp and current block timestamp, in ray
   */
  function calculateCompoundedInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp
  ) internal view returns (uint256) {
    return calculateCompoundedInterest(rate, lastUpdateTimestamp, block.timestamp);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 2 for Variable, 1 is deprecated (changed on v3.2.0)
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan,
   *        1 for Stable (Deprecated on v3.2.0), 2 for Variable
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );
  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate @note deprecated on v3.2.0
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);
  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);
  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the VariableDebtToken
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 variable debt tokens
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;
  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);
  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);
  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode DEPRECATED in v3.2.0
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);
  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Deprecated on v3.2.0
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using 2 on `modes`
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );
  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;
  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev Does not reset eMode flags, which must be considered when reusing the same reserve id for a different reserve.
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;
  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;
  /**
   * @notice Accumulates interest to all indexes of the reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncIndexesState(address asset) external;
  /**
   * @notice Updates interest rates on the reserve data
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncRatesState(address asset) external;
  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;
  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);
  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);
  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);
  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveDataLegacy memory);
  /**
   * @notice Returns the state and configuration of the reserve, including extra data included with Aave v3.1
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve with virtual accounting
   */
  function getReserveDataExtended(
    address asset
  ) external view returns (DataTypes.ReserveData memory);
  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint128);
  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;
  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);
  /**
   * @notice Returns the number of initialized reserves
   * @dev It includes dropped reserves
   * @return The count
   */
  function getReservesCount() external view returns (uint256);
  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);
  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;
  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;
  /**
   * @notice Configures a new or alters an existing collateral configuration of an eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(
    uint8 id,
    DataTypes.EModeCategoryBaseConfiguration memory config
  ) external;
  /**
   * @notice Replaces the current eMode collateralBitmap.
   * @param id The id of the category
   * @param collateralBitmap The collateralBitmap of the category
   */
  function configureEModeCategoryCollateralBitmap(uint8 id, uint128 collateralBitmap) external;
  /**
   * @notice Replaces the current eMode borrowableBitmap.
   * @param id The id of the category
   * @param borrowableBitmap The borrowableBitmap of the category
   */
  function configureEModeCategoryBorrowableBitmap(uint8 id, uint128 borrowableBitmap) external;
  /**
   * @notice Returns the data of an eMode category
   * @dev DEPRECATED use independent getters instead
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(
    uint8 id
  ) external view returns (DataTypes.EModeCategoryLegacy memory);
  /**
   * @notice Returns the label of an eMode category
   * @param id The id of the category
   * @return The label of the category
   */
  function getEModeCategoryLabel(uint8 id) external view returns (string memory);
  /**
   * @notice Returns the collateral config of an eMode category
   * @param id The id of the category
   * @return The ltv,lt,lb of the category
   */
  function getEModeCategoryCollateralConfig(
    uint8 id
  ) external view returns (DataTypes.CollateralConfig memory);
  /**
   * @notice Returns the collateralBitmap of an eMode category
   * @param id The id of the category
   * @return The collateralBitmap of the category
   */
  function getEModeCategoryCollateralBitmap(uint8 id) external view returns (uint128);
  /**
   * @notice Returns the borrowableBitmap of an eMode category
   * @param id The id of the category
   * @return The borrowableBitmap of the category
   */
  function getEModeCategoryBorrowableBitmap(uint8 id) external view returns (uint128);
  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;
  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);
  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;
  /**
   * @notice Sets the liquidation grace period of the given asset
   * @dev To enable a liquidation grace period, a timestamp in the future should be set,
   *      To disable a liquidation grace period, any timestamp in the past works, like 0
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   **/
  function setLiquidationGracePeriod(address asset, uint40 until) external;
  /**
   * @notice Returns the liquidation grace period of the given asset
   * @param asset The address of the underlying asset
   * @return Timestamp when the liquidation grace period will end
   **/
  function getLiquidationGracePeriod(address asset) external returns (uint40);
  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);
  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
  /**
   * @notice Gets the address of the external FlashLoanLogic
   */
  function getFlashLoanLogic() external view returns (address);
  /**
   * @notice Gets the address of the external BorrowLogic
   */
  function getBorrowLogic() external view returns (address);
  /**
   * @notice Gets the address of the external BridgeLogic
   */
  function getBridgeLogic() external view returns (address);
  /**
   * @notice Gets the address of the external EModeLogic
   */
  function getEModeLogic() external view returns (address);
  /**
   * @notice Gets the address of the external LiquidationLogic
   */
  function getLiquidationLogic() external view returns (address);
  /**
   * @notice Gets the address of the external PoolLogic
   */
  function getPoolLogic() external view returns (address);
  /**
   * @notice Gets the address of the external SupplyLogic
   */
  function getSupplyLogic() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
/**
 * @title EModeLogic library
 * @author Aave
 * @notice Implements the base logic for all the actions related to the eMode
 */
library EModeLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  // See `IPool` for descriptions
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @notice Updates the user efficiency mode category
   * @dev Will revert if user is borrowing non-compatible asset or change will drop HF < HEALTH_FACTOR_LIQUIDATION_THRESHOLD
   * @dev Emits the `UserEModeSet` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param usersEModeCategory The state of all users efficiency mode category
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the setUserEMode function
   */
  function executeSetUserEMode(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    mapping(address => uint8) storage usersEModeCategory,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteSetUserEModeParams memory params
  ) external {
    if (usersEModeCategory[msg.sender] == params.categoryId) return;
    ValidationLogic.validateSetUserEMode(
      eModeCategories,
      userConfig,
      params.reservesCount,
      params.categoryId
    );
    usersEModeCategory[msg.sender] = params.categoryId;
    ValidationLogic.validateHealthFactor(
      reservesData,
      reservesList,
      eModeCategories,
      userConfig,
      msg.sender,
      params.categoryId,
      params.reservesCount,
      params.oracle
    );
    emit UserEModeSet(msg.sender, params.categoryId);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }
  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
import {IERC20} from './IERC20.sol';
interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);
  function symbol() external view returns (string memory);
  function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;
  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;
  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;
  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;
  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;
  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;
  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;
  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;
  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;
  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);
  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;
  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;
  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);
  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;
  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;
  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableDebtToken
 * @author Aave
 * @notice Interface for the initialize function common between debt tokens
 */
interface IInitializableDebtToken {
  /**
   * @dev Emitted when a debt token is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param incentivesController The address of the incentives controller for this aToken
   * @param debtTokenDecimals The decimals of the debt token
   * @param debtTokenName The name of the debt token
   * @param debtTokenSymbol The symbol of the debt token
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address incentivesController,
    uint8 debtTokenDecimals,
    string debtTokenName,
    string debtTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the debt token.
   * @param pool The pool contract that is initializing this contract
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
    // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
    // for accounts without code, i.e. `keccak256('')`
    bytes32 codehash;
    bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      codehash := extcodehash(account)
    }
    return (codehash != accountHash && codehash != 0x0);
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');
    // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './Proxy.sol';
import '../contracts/Address.sol';
/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);
  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT =
    0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal view override returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      impl := sload(slot)
    }
  }
  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }
  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(
      Address.isContract(newImplementation),
      'Cannot set a proxy implementation to a non-contract address'
    );
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      sstore(slot, newImplementation)
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './BaseUpgradeabilityProxy.sol';
/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  function initialize(address _logic, bytes memory _data) public payable {
    require(_implementation() == address(0));
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if (_data.length > 0) {
      (bool success, ) = _logic.delegatecall(_data);
      require(success);
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Will run if no other function in the contract matches the call data.
   * Implemented entirely in `_fallback`.
   */
  fallback() external payable {
    _fallback();
  }
  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view virtual returns (address);
  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    //solium-disable-next-line
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())
      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())
      switch result
      // delegatecall returns 0 on error.
      case 0 {
        revert(0, returndatasize())
      }
      default {
        return(0, returndatasize())
      }
    }
  }
  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {}
  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {BaseUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/BaseUpgradeabilityProxy.sol';
/**
 * @title BaseImmutableAdminUpgradeabilityProxy
 * @author Aave, inspired by the OpenZeppelin upgradeability proxy pattern
 * @notice This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * @dev The admin role is stored in an immutable, which helps saving transactions costs
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseImmutableAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  address internal immutable _admin;
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) {
    _admin = admin;
  }
  modifier ifAdmin() {
    if (msg.sender == _admin) {
      _;
    } else {
      _fallback();
    }
  }
  /**
   * @notice Return the admin address
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin;
  }
  /**
   * @notice Return the implementation address
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }
  /**
   * @notice Upgrade the backing implementation of the proxy.
   * @dev Only the admin can call this function.
   * @param newImplementation The address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }
  /**
   * @notice Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * @dev This is useful to initialize the proxied contract.
   * @param newImplementation The address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data)
    external
    payable
    ifAdmin
  {
    _upgradeTo(newImplementation);
    (bool success, ) = newImplementation.delegatecall(data);
    require(success);
  }
  /**
   * @notice Only fall back when the sender is not the admin.
   */
  function _willFallback() internal virtual override {
    require(msg.sender != _admin, 'Cannot call fallback function from the proxy admin');
    super._willFallback();
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {InitializableUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/InitializableUpgradeabilityProxy.sol';
import {Proxy} from '../../../dependencies/openzeppelin/upgradeability/Proxy.sol';
import {BaseImmutableAdminUpgradeabilityProxy} from './BaseImmutableAdminUpgradeabilityProxy.sol';
/**
 * @title InitializableAdminUpgradeabilityProxy
 * @author Aave
 * @dev Extends BaseAdminUpgradeabilityProxy with an initializer function
 */
contract InitializableImmutableAdminUpgradeabilityProxy is
  BaseImmutableAdminUpgradeabilityProxy,
  InitializableUpgradeabilityProxy
{
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) BaseImmutableAdminUpgradeabilityProxy(admin) {
    // Intentionally left blank
  }
  /// @inheritdoc BaseImmutableAdminUpgradeabilityProxy
  function _willFallback() internal override(BaseImmutableAdminUpgradeabilityProxy, Proxy) {
    BaseImmutableAdminUpgradeabilityProxy._willFallback();
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }
  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {IERC20} from './IERC20.sol';
interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);
  function symbol() external view returns (string memory);
  function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity 0.8.10;
/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
    return uint224(value);
  }
  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
    return uint128(value);
  }
  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
    return uint96(value);
  }
  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
    return uint64(value);
  }
  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
    return uint32(value);
  }
  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
    return uint16(value);
  }
  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
    return uint8(value);
  }
  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    require(value >= 0, 'SafeCast: value must be positive');
    return uint256(value);
  }
  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   *
   * _Available since v3.1._
   */
  function toInt128(int256 value) internal pure returns (int128) {
    require(
      value >= type(int128).min && value <= type(int128).max,
      "SafeCast: value doesn't fit in 128 bits"
    );
    return int128(value);
  }
  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   *
   * _Available since v3.1._
   */
  function toInt64(int256 value) internal pure returns (int64) {
    require(
      value >= type(int64).min && value <= type(int64).max,
      "SafeCast: value doesn't fit in 64 bits"
    );
    return int64(value);
  }
  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   *
   * _Available since v3.1._
   */
  function toInt32(int256 value) internal pure returns (int32) {
    require(
      value >= type(int32).min && value <= type(int32).max,
      "SafeCast: value doesn't fit in 32 bits"
    );
    return int32(value);
  }
  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   *
   * _Available since v3.1._
   */
  function toInt16(int256 value) internal pure returns (int16) {
    require(
      value >= type(int16).min && value <= type(int16).max,
      "SafeCast: value doesn't fit in 16 bits"
    );
    return int16(value);
  }
  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   *
   * _Available since v3.1._
   */
  function toInt8(int256 value) internal pure returns (int8) {
    require(
      value >= type(int8).min && value <= type(int8).max,
      "SafeCast: value doesn't fit in 8 bits"
    );
    return int8(value);
  }
  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
    return int256(value);
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;
  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;
  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;
  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;
  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;
  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;
  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;
  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;
  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;
  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);
  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;
  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;
  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);
  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;
  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;
  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(
    address user,
    uint256 totalSupply,
    uint256 userBalance
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title ICreditDelegationToken
 * @author Aave
 * @notice Defines the basic interface for a token supporting credit delegation.
 */
interface ICreditDelegationToken {
  /**
   * @dev Emitted on `approveDelegation` and `borrowAllowance
   * @param fromUser The address of the delegator
   * @param toUser The address of the delegatee
   * @param asset The address of the delegated asset
   * @param amount The amount being delegated
   */
  event BorrowAllowanceDelegated(
    address indexed fromUser,
    address indexed toUser,
    address indexed asset,
    uint256 amount
  );
  /**
   * @notice Delegates borrowing power to a user on the specific debt token.
   * Delegation will still respect the liquidation constraints (even if delegated, a
   * delegatee cannot force a delegator HF to go below 1)
   * @param delegatee The address receiving the delegated borrowing power
   * @param amount The maximum amount being delegated.
   */
  function approveDelegation(address delegatee, uint256 amount) external;
  /**
   * @notice Returns the borrow allowance of the user
   * @param fromUser The user to giving allowance
   * @param toUser The user to give allowance to
   * @return The current allowance of `toUser`
   */
  function borrowAllowance(address fromUser, address toUser) external view returns (uint256);
  /**
   * @notice Delegates borrowing power to a user on the specific debt token via ERC712 signature
   * @param delegator The delegator of the credit
   * @param delegatee The delegatee that can use the credit
   * @param value The amount to be delegated
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v The V signature param
   * @param s The S signature param
   * @param r The R signature param
   */
  function delegationWithSig(
    address delegator,
    address delegatee,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableDebtToken
 * @author Aave
 * @notice Interface for the initialize function common between debt tokens
 */
interface IInitializableDebtToken {
  /**
   * @dev Emitted when a debt token is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param incentivesController The address of the incentives controller for this aToken
   * @param debtTokenDecimals The decimals of the debt token
   * @param debtTokenName The name of the debt token
   * @param debtTokenSymbol The symbol of the debt token
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address incentivesController,
    uint8 debtTokenDecimals,
    string debtTokenName,
    string debtTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the debt token.
   * @param pool The pool contract that is initializing this contract
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );
  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );
  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);
  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(
    address asset,
    uint256 amount,
    uint256 fee
  ) external returns (uint256);
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(
    address asset,
    uint256 amount,
    address to
  ) external returns (uint256);
  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;
  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);
  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);
  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);
  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;
  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;
  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(address user)
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );
  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;
  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;
  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(address asset, address rateStrategyAddress)
    external;
  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(address asset, DataTypes.ReserveConfigurationMap calldata configuration)
    external;
  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(address asset)
    external
    view
    returns (DataTypes.ReserveConfigurationMap memory);
  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(address user)
    external
    view
    returns (DataTypes.UserConfigurationMap memory);
  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);
  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);
  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;
  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);
  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);
  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;
  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;
  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;
  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);
  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;
  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);
  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;
  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);
  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);
  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(
    address token,
    address to,
    uint256 amount
  ) external;
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );
  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );
  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);
  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;
  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);
  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;
  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);
  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;
  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);
  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);
  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;
  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);
  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;
  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);
  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;
  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);
  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;
  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);
  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);
  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);
  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
/**
 * @title IVariableDebtToken
 * @author Aave
 * @notice Defines the basic interface for a variable debt token.
 */
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
  /**
   * @notice Mints debt token to the `onBehalfOf` address
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return True if the previous balance of the user is 0, false otherwise
   * @return The scaled total debt of the reserve
   */
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool, uint256);
  /**
   * @notice Burns user variable debt
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the debt will be burned
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   * @return The scaled total debt of the reserve
   */
  function burn(
    address from,
    uint256 amount,
    uint256 index
  ) external returns (uint256);
  /**
   * @notice Returns the address of the underlying asset of this debtToken (E.g. WETH for variableDebtWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @title VersionedInitializable
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 * @notice Helper contract to implement initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * @dev WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 */
abstract contract VersionedInitializable {
  /**
   * @dev Indicates that the contract has been initialized.
   */
  uint256 private lastInitializedRevision = 0;
  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;
  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    uint256 revision = getRevision();
    require(
      initializing || isConstructor() || revision > lastInitializedRevision,
      'Contract instance has already been initialized'
    );
    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      lastInitializedRevision = revision;
    }
    _;
    if (isTopLevelCall) {
      initializing = false;
    }
  }
  /**
   * @notice Returns the revision number of the contract
   * @dev Needs to be defined in the inherited class as a constant.
   * @return The revision number
   */
  function getRevision() internal pure virtual returns (uint256);
  /**
   * @notice Returns true if and only if the function is running in the constructor
   * @return True if the function is running in the constructor
   */
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    uint256 cs;
    //solium-disable-next-line
    assembly {
      cs := extcodesize(address())
    }
    return cs == 0;
  }
  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE = '62'; // 'User is in isolation mode'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;
  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;
  uint256 internal constant WAD_RAY_RATIO = 1e9;
  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }
  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }
  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }
  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }
  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }
  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)
      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library DataTypes {
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }
  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62-63: reserved
    //bit 64-79: reserve factor
    //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167 liquidation protocol fee
    //bit 168-175 eMode category
    //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252-255 unused
    uint256 data;
  }
  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }
  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }
  enum InterestRateMode {
    NONE,
    STABLE,
    VARIABLE
  }
  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }
  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }
  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }
  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }
  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }
  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }
  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }
  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }
  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }
  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }
  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    address aToken;
  }
  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {IERC20} from '../../dependencies/openzeppelin/contracts/IERC20.sol';
import {SafeCast} from '../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {VersionedInitializable} from '../libraries/aave-upgradeability/VersionedInitializable.sol';
import {WadRayMath} from '../libraries/math/WadRayMath.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {IPool} from '../../interfaces/IPool.sol';
import {IAaveIncentivesController} from '../../interfaces/IAaveIncentivesController.sol';
import {IInitializableDebtToken} from '../../interfaces/IInitializableDebtToken.sol';
import {IVariableDebtToken} from '../../interfaces/IVariableDebtToken.sol';
import {EIP712Base} from './base/EIP712Base.sol';
import {DebtTokenBase} from './base/DebtTokenBase.sol';
import {ScaledBalanceTokenBase} from './base/ScaledBalanceTokenBase.sol';
/**
 * @title VariableDebtToken
 * @author Aave
 * @notice Implements a variable debt token to track the borrowing positions of users
 * at variable rate mode
 * @dev Transfer and approve functionalities are disabled since its a non-transferable token
 */
contract VariableDebtToken is DebtTokenBase, ScaledBalanceTokenBase, IVariableDebtToken {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  uint256 public constant DEBT_TOKEN_REVISION = 0x1;
  /**
   * @dev Constructor.
   * @param pool The address of the Pool contract
   */
  constructor(IPool pool)
    DebtTokenBase()
    ScaledBalanceTokenBase(pool, 'VARIABLE_DEBT_TOKEN_IMPL', 'VARIABLE_DEBT_TOKEN_IMPL', 0)
  {
    // Intentionally left blank
  }
  /// @inheritdoc IInitializableDebtToken
  function initialize(
    IPool initializingPool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external override initializer {
    require(initializingPool == POOL, Errors.POOL_ADDRESSES_DO_NOT_MATCH);
    _setName(debtTokenName);
    _setSymbol(debtTokenSymbol);
    _setDecimals(debtTokenDecimals);
    _underlyingAsset = underlyingAsset;
    _incentivesController = incentivesController;
    _domainSeparator = _calculateDomainSeparator();
    emit Initialized(
      underlyingAsset,
      address(POOL),
      address(incentivesController),
      debtTokenDecimals,
      debtTokenName,
      debtTokenSymbol,
      params
    );
  }
  /// @inheritdoc VersionedInitializable
  function getRevision() internal pure virtual override returns (uint256) {
    return DEBT_TOKEN_REVISION;
  }
  /// @inheritdoc IERC20
  function balanceOf(address user) public view virtual override returns (uint256) {
    uint256 scaledBalance = super.balanceOf(user);
    if (scaledBalance == 0) {
      return 0;
    }
    return scaledBalance.rayMul(POOL.getReserveNormalizedVariableDebt(_underlyingAsset));
  }
  /// @inheritdoc IVariableDebtToken
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external virtual override onlyPool returns (bool, uint256) {
    if (user != onBehalfOf) {
      _decreaseBorrowAllowance(onBehalfOf, user, amount);
    }
    return (_mintScaled(user, onBehalfOf, amount, index), scaledTotalSupply());
  }
  /// @inheritdoc IVariableDebtToken
  function burn(
    address from,
    uint256 amount,
    uint256 index
  ) external virtual override onlyPool returns (uint256) {
    _burnScaled(from, address(0), amount, index);
    return scaledTotalSupply();
  }
  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return super.totalSupply().rayMul(POOL.getReserveNormalizedVariableDebt(_underlyingAsset));
  }
  /// @inheritdoc EIP712Base
  function _EIP712BaseId() internal view override returns (string memory) {
    return name();
  }
  /**
   * @dev Being non transferrable, the debt token does not implement any of the
   * standard ERC20 functions for transfer and allowance.
   */
  function transfer(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }
  function allowance(address, address) external view virtual override returns (uint256) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }
  function approve(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }
  function transferFrom(
    address,
    address,
    uint256
  ) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }
  function increaseAllowance(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }
  function decreaseAllowance(address, uint256) external virtual override returns (bool) {
    revert(Errors.OPERATION_NOT_SUPPORTED);
  }
  /// @inheritdoc IVariableDebtToken
  function UNDERLYING_ASSET_ADDRESS() external view override returns (address) {
    return _underlyingAsset;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {VersionedInitializable} from '../../libraries/aave-upgradeability/VersionedInitializable.sol';
import {ICreditDelegationToken} from '../../../interfaces/ICreditDelegationToken.sol';
import {EIP712Base} from './EIP712Base.sol';
/**
 * @title DebtTokenBase
 * @author Aave
 * @notice Base contract for different types of debt tokens, like StableDebtToken or VariableDebtToken
 */
abstract contract DebtTokenBase is
  VersionedInitializable,
  EIP712Base,
  Context,
  ICreditDelegationToken
{
  // Map of borrow allowances (delegator => delegatee => borrowAllowanceAmount)
  mapping(address => mapping(address => uint256)) internal _borrowAllowances;
  // Credit Delegation Typehash
  bytes32 public constant DELEGATION_WITH_SIG_TYPEHASH =
    keccak256('DelegationWithSig(address delegatee,uint256 value,uint256 nonce,uint256 deadline)');
  address internal _underlyingAsset;
  /**
   * @dev Constructor.
   */
  constructor() EIP712Base() {
    // Intentionally left blank
  }
  /// @inheritdoc ICreditDelegationToken
  function approveDelegation(address delegatee, uint256 amount) external override {
    _approveDelegation(_msgSender(), delegatee, amount);
  }
  /// @inheritdoc ICreditDelegationToken
  function delegationWithSig(
    address delegator,
    address delegatee,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external {
    require(delegator != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    //solium-disable-next-line
    require(block.timestamp <= deadline, Errors.INVALID_EXPIRATION);
    uint256 currentValidNonce = _nonces[delegator];
    bytes32 digest = keccak256(
      abi.encodePacked(
        '\\x19\\x01',
        DOMAIN_SEPARATOR(),
        keccak256(
          abi.encode(DELEGATION_WITH_SIG_TYPEHASH, delegatee, value, currentValidNonce, deadline)
        )
      )
    );
    require(delegator == ecrecover(digest, v, r, s), Errors.INVALID_SIGNATURE);
    _nonces[delegator] = currentValidNonce + 1;
    _approveDelegation(delegator, delegatee, value);
  }
  /// @inheritdoc ICreditDelegationToken
  function borrowAllowance(address fromUser, address toUser)
    external
    view
    override
    returns (uint256)
  {
    return _borrowAllowances[fromUser][toUser];
  }
  /**
   * @notice Updates the borrow allowance of a user on the specific debt token.
   * @param delegator The address delegating the borrowing power
   * @param delegatee The address receiving the delegated borrowing power
   * @param amount The allowance amount being delegated.
   */
  function _approveDelegation(
    address delegator,
    address delegatee,
    uint256 amount
  ) internal {
    _borrowAllowances[delegator][delegatee] = amount;
    emit BorrowAllowanceDelegated(delegator, delegatee, _underlyingAsset, amount);
  }
  /**
   * @notice Decreases the borrow allowance of a user on the specific debt token.
   * @param delegator The address delegating the borrowing power
   * @param delegatee The address receiving the delegated borrowing power
   * @param amount The amount to subtract from the current allowance
   */
  function _decreaseBorrowAllowance(
    address delegator,
    address delegatee,
    uint256 amount
  ) internal {
    uint256 newAllowance = _borrowAllowances[delegator][delegatee] - amount;
    _borrowAllowances[delegator][delegatee] = newAllowance;
    emit BorrowAllowanceDelegated(delegator, delegatee, _underlyingAsset, newAllowance);
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
/**
 * @title EIP712Base
 * @author Aave
 * @notice Base contract implementation of EIP712.
 */
abstract contract EIP712Base {
  bytes public constant EIP712_REVISION = bytes('1');
  bytes32 internal constant EIP712_DOMAIN =
    keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)');
  // Map of address nonces (address => nonce)
  mapping(address => uint256) internal _nonces;
  bytes32 internal _domainSeparator;
  uint256 internal immutable _chainId;
  /**
   * @dev Constructor.
   */
  constructor() {
    _chainId = block.chainid;
  }
  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
    if (block.chainid == _chainId) {
      return _domainSeparator;
    }
    return _calculateDomainSeparator();
  }
  /**
   * @notice Returns the nonce value for address specified as parameter
   * @param owner The address for which the nonce is being returned
   * @return The nonce value for the input address`
   */
  function nonces(address owner) public view virtual returns (uint256) {
    return _nonces[owner];
  }
  /**
   * @notice Compute the current domain separator
   * @return The domain separator for the token
   */
  function _calculateDomainSeparator() internal view returns (bytes32) {
    return
      keccak256(
        abi.encode(
          EIP712_DOMAIN,
          keccak256(bytes(_EIP712BaseId())),
          keccak256(EIP712_REVISION),
          block.chainid,
          address(this)
        )
      );
  }
  /**
   * @notice Returns the user readable name of signing domain (e.g. token name)
   * @return The name of the signing domain
   */
  function _EIP712BaseId() internal view virtual returns (string memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IACLManager} from '../../../interfaces/IACLManager.sol';
/**
 * @title IncentivizedERC20
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 * @notice Basic ERC20 implementation
 */
abstract contract IncentivizedERC20 is Context, IERC20Detailed {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    IACLManager aclManager = IACLManager(_addressesProvider.getACLManager());
    require(aclManager.isPoolAdmin(msg.sender), Errors.CALLER_NOT_POOL_ADMIN);
    _;
  }
  /**
   * @dev Only pool can call functions marked by this modifier.
   */
  modifier onlyPool() {
    require(_msgSender() == address(POOL), Errors.CALLER_MUST_BE_POOL);
    _;
  }
  /**
   * @dev UserState - additionalData is a flexible field.
   * ATokens and VariableDebtTokens use this field store the index of the
   * user's last supply/withdrawal/borrow/repayment. StableDebtTokens use
   * this field to store the user's stable rate.
   */
  struct UserState {
    uint128 balance;
    uint128 additionalData;
  }
  // Map of users address and their state data (userAddress => userStateData)
  mapping(address => UserState) internal _userState;
  // Map of allowances (delegator => delegatee => allowanceAmount)
  mapping(address => mapping(address => uint256)) private _allowances;
  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  IAaveIncentivesController internal _incentivesController;
  IPoolAddressesProvider internal immutable _addressesProvider;
  IPool public immutable POOL;
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) {
    _addressesProvider = pool.ADDRESSES_PROVIDER();
    _name = name;
    _symbol = symbol;
    _decimals = decimals;
    POOL = pool;
  }
  /// @inheritdoc IERC20Detailed
  function name() public view override returns (string memory) {
    return _name;
  }
  /// @inheritdoc IERC20Detailed
  function symbol() external view override returns (string memory) {
    return _symbol;
  }
  /// @inheritdoc IERC20Detailed
  function decimals() external view override returns (uint8) {
    return _decimals;
  }
  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }
  /// @inheritdoc IERC20
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _userState[account].balance;
  }
  /**
   * @notice Returns the address of the Incentives Controller contract
   * @return The address of the Incentives Controller
   */
  function getIncentivesController() external view virtual returns (IAaveIncentivesController) {
    return _incentivesController;
  }
  /**
   * @notice Sets a new Incentives Controller
   * @param controller the new Incentives controller
   */
  function setIncentivesController(IAaveIncentivesController controller) external onlyPoolAdmin {
    _incentivesController = controller;
  }
  /// @inheritdoc IERC20
  function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _transfer(_msgSender(), recipient, castAmount);
    return true;
  }
  /// @inheritdoc IERC20
  function allowance(address owner, address spender)
    external
    view
    virtual
    override
    returns (uint256)
  {
    return _allowances[owner][spender];
  }
  /// @inheritdoc IERC20
  function approve(address spender, uint256 amount) external virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }
  /// @inheritdoc IERC20
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - castAmount);
    _transfer(sender, recipient, castAmount);
    return true;
  }
  /**
   * @notice Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   */
  function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
    return true;
  }
  /**
   * @notice Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   */
  function decreaseAllowance(address spender, uint256 subtractedValue)
    external
    virtual
    returns (bool)
  {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
    return true;
  }
  /**
   * @notice Transfers tokens between two users and apply incentives if defined.
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(
    address sender,
    address recipient,
    uint128 amount
  ) internal virtual {
    uint128 oldSenderBalance = _userState[sender].balance;
    _userState[sender].balance = oldSenderBalance - amount;
    uint128 oldRecipientBalance = _userState[recipient].balance;
    _userState[recipient].balance = oldRecipientBalance + amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      incentivesControllerLocal.handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        incentivesControllerLocal.handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }
  /**
   * @notice Approve `spender` to use `amount` of `owner`s balance
   * @param owner The address owning the tokens
   * @param spender The address approved for spending
   * @param amount The amount of tokens to approve spending of
   */
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }
  /**
   * @notice Update the name of the token
   * @param newName The new name for the token
   */
  function _setName(string memory newName) internal {
    _name = newName;
  }
  /**
   * @notice Update the symbol for the token
   * @param newSymbol The new symbol for the token
   */
  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }
  /**
   * @notice Update the number of decimals for the token
   * @param newDecimals The new number of decimals for the token
   */
  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IncentivizedERC20} from './IncentivizedERC20.sol';
/**
 * @title MintableIncentivizedERC20
 * @author Aave
 * @notice Implements mint and burn functions for IncentivizedERC20
 */
abstract contract MintableIncentivizedERC20 is IncentivizedERC20 {
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) IncentivizedERC20(pool, name, symbol, decimals) {
    // Intentionally left blank
  }
  /**
   * @notice Mints tokens to an account and apply incentives if defined
   * @param account The address receiving tokens
   * @param amount The amount of tokens to mint
   */
  function _mint(address account, uint128 amount) internal virtual {
    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply + amount;
    uint128 oldAccountBalance = _userState[account].balance;
    _userState[account].balance = oldAccountBalance + amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      incentivesControllerLocal.handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }
  /**
   * @notice Burns tokens from an account and apply incentives if defined
   * @param account The account whose tokens are burnt
   * @param amount The amount of tokens to burn
   */
  function _burn(address account, uint128 amount) internal virtual {
    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply - amount;
    uint128 oldAccountBalance = _userState[account].balance;
    _userState[account].balance = oldAccountBalance - amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      incentivesControllerLocal.handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {MintableIncentivizedERC20} from './MintableIncentivizedERC20.sol';
/**
 * @title ScaledBalanceTokenBase
 * @author Aave
 * @notice Basic ERC20 implementation of scaled balance token
 */
abstract contract ScaledBalanceTokenBase is MintableIncentivizedERC20, IScaledBalanceToken {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) MintableIncentivizedERC20(pool, name, symbol, decimals) {
    // Intentionally left blank
  }
  /// @inheritdoc IScaledBalanceToken
  function scaledBalanceOf(address user) external view override returns (uint256) {
    return super.balanceOf(user);
  }
  /// @inheritdoc IScaledBalanceToken
  function getScaledUserBalanceAndSupply(address user)
    external
    view
    override
    returns (uint256, uint256)
  {
    return (super.balanceOf(user), super.totalSupply());
  }
  /// @inheritdoc IScaledBalanceToken
  function scaledTotalSupply() public view virtual override returns (uint256) {
    return super.totalSupply();
  }
  /// @inheritdoc IScaledBalanceToken
  function getPreviousIndex(address user) external view virtual override returns (uint256) {
    return _userState[user].additionalData;
  }
  /**
   * @notice Implements the basic logic to mint a scaled balance token.
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the scaled tokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function _mintScaled(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) internal returns (bool) {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.INVALID_MINT_AMOUNT);
    uint256 scaledBalance = super.balanceOf(onBehalfOf);
    uint256 balanceIncrease = scaledBalance.rayMul(index) -
      scaledBalance.rayMul(_userState[onBehalfOf].additionalData);
    _userState[onBehalfOf].additionalData = index.toUint128();
    _mint(onBehalfOf, amountScaled.toUint128());
    uint256 amountToMint = amount + balanceIncrease;
    emit Transfer(address(0), onBehalfOf, amountToMint);
    emit Mint(caller, onBehalfOf, amountToMint, balanceIncrease, index);
    return (scaledBalance == 0);
  }
  /**
   * @notice Implements the basic logic to burn a scaled balance token.
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param user The user which debt is burnt
   * @param target The address that will receive the underlying, if any
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   */
  function _burnScaled(
    address user,
    address target,
    uint256 amount,
    uint256 index
  ) internal {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.INVALID_BURN_AMOUNT);
    uint256 scaledBalance = super.balanceOf(user);
    uint256 balanceIncrease = scaledBalance.rayMul(index) -
      scaledBalance.rayMul(_userState[user].additionalData);
    _userState[user].additionalData = index.toUint128();
    _burn(user, amountScaled.toUint128());
    if (balanceIncrease > amount) {
      uint256 amountToMint = balanceIncrease - amount;
      emit Transfer(address(0), user, amountToMint);
      emit Mint(user, user, amountToMint, balanceIncrease, index);
    } else {
      uint256 amountToBurn = amount - balanceIncrease;
      emit Transfer(user, address(0), amountToBurn);
      emit Burn(user, target, amountToBurn, balanceIncrease, index);
    }
  }
  /**
   * @notice Implements the basic logic to transfer scaled balance tokens between two users
   * @dev It emits a mint event with the interest accrued per user
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   * @param index The next liquidity index of the reserve
   */
  function _transfer(
    address sender,
    address recipient,
    uint256 amount,
    uint256 index
  ) internal {
    uint256 senderScaledBalance = super.balanceOf(sender);
    uint256 senderBalanceIncrease = senderScaledBalance.rayMul(index) -
      senderScaledBalance.rayMul(_userState[sender].additionalData);
    uint256 recipientScaledBalance = super.balanceOf(recipient);
    uint256 recipientBalanceIncrease = recipientScaledBalance.rayMul(index) -
      recipientScaledBalance.rayMul(_userState[recipient].additionalData);
    _userState[sender].additionalData = index.toUint128();
    _userState[recipient].additionalData = index.toUint128();
    super._transfer(sender, recipient, amount.rayDiv(index).toUint128());
    if (senderBalanceIncrease > 0) {
      emit Transfer(address(0), sender, senderBalanceIncrease);
      emit Mint(_msgSender(), sender, senderBalanceIncrease, senderBalanceIncrease, index);
    }
    if (sender != recipient && recipientBalanceIncrease > 0) {
      emit Transfer(address(0), recipient, recipientBalanceIncrease);
      emit Mint(_msgSender(), recipient, recipientBalanceIncrease, recipientBalanceIncrease, index);
    }
    emit Transfer(sender, recipient, amount);
  }
}

// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity 0.8.10;
import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';
/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(
    IERC20 token,
    address to,
    uint256 value
  ) internal {
    bytes4 selector_ = token.transfer.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }
  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(
    IERC20 token,
    address from,
    address to,
    uint256 value
  ) internal {
    bytes4 selector_ = token.transferFrom.selector;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)
      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }
    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }
  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\\x08\\xc3\\x79\\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }
      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }
        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())
        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }
  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {IERC20} from './IERC20.sol';
interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);
  function symbol() external view returns (string memory);
  function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity 0.8.10;
/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
    return uint224(value);
  }
  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
    return uint128(value);
  }
  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
    return uint96(value);
  }
  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
    return uint64(value);
  }
  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
    return uint32(value);
  }
  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
    return uint16(value);
  }
  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
    return uint8(value);
  }
  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    require(value >= 0, 'SafeCast: value must be positive');
    return uint256(value);
  }
  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   *
   * _Available since v3.1._
   */
  function toInt128(int256 value) internal pure returns (int128) {
    require(
      value >= type(int128).min && value <= type(int128).max,
      "SafeCast: value doesn't fit in 128 bits"
    );
    return int128(value);
  }
  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   *
   * _Available since v3.1._
   */
  function toInt64(int256 value) internal pure returns (int64) {
    require(
      value >= type(int64).min && value <= type(int64).max,
      "SafeCast: value doesn't fit in 64 bits"
    );
    return int64(value);
  }
  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   *
   * _Available since v3.1._
   */
  function toInt32(int256 value) internal pure returns (int32) {
    require(
      value >= type(int32).min && value <= type(int32).max,
      "SafeCast: value doesn't fit in 32 bits"
    );
    return int32(value);
  }
  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   *
   * _Available since v3.1._
   */
  function toInt16(int256 value) internal pure returns (int16) {
    require(
      value >= type(int16).min && value <= type(int16).max,
      "SafeCast: value doesn't fit in 16 bits"
    );
    return int16(value);
  }
  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   *
   * _Available since v3.1._
   */
  function toInt8(int256 value) internal pure returns (int8) {
    require(
      value >= type(int8).min && value <= type(int8).max,
      "SafeCast: value doesn't fit in 8 bits"
    );
    return int8(value);
  }
  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
    return int256(value);
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);
  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);
  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;
  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;
  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;
  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;
  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;
  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;
  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;
  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);
  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;
  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;
  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);
  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;
  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;
  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);
  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;
  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;
  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);
  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(
    address from,
    address receiverOfUnderlying,
    uint256 amount,
    uint256 index
  ) external;
  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;
  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(
    address from,
    address to,
    uint256 value
  ) external;
  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;
  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(
    address user,
    address onBehalfOf,
    uint256 amount
  ) external;
  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;
  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);
  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);
  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(
    address token,
    address to,
    uint256 amount
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(
    address user,
    uint256 totalSupply,
    uint256 userBalance
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );
  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );
  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );
  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );
  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );
  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);
  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(
    address asset,
    uint256 amount,
    uint256 fee
  ) external returns (uint256);
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(
    address asset,
    uint256 amount,
    address to
  ) external returns (uint256);
  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;
  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);
  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);
  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);
  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;
  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;
  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;
  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(address user)
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );
  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;
  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;
  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(address asset, address rateStrategyAddress)
    external;
  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(address asset, DataTypes.ReserveConfigurationMap calldata configuration)
    external;
  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(address asset)
    external
    view
    returns (DataTypes.ReserveConfigurationMap memory);
  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(address user)
    external
    view
    returns (DataTypes.UserConfigurationMap memory);
  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);
  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);
  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;
  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);
  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);
  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;
  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;
  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;
  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);
  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;
  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);
  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;
  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);
  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);
  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;
  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(
    address token,
    address to,
    uint256 amount
  ) external;
  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );
  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );
  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);
  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;
  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);
  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;
  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);
  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;
  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);
  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);
  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;
  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);
  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;
  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);
  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;
  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);
  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;
  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);
  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );
  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);
  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);
  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @title VersionedInitializable
 * @author Aave, inspired by the OpenZeppelin Initializable contract
 * @notice Helper contract to implement initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * @dev WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 */
abstract contract VersionedInitializable {
  /**
   * @dev Indicates that the contract has been initialized.
   */
  uint256 private lastInitializedRevision = 0;
  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;
  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    uint256 revision = getRevision();
    require(
      initializing || isConstructor() || revision > lastInitializedRevision,
      'Contract instance has already been initialized'
    );
    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      lastInitializedRevision = revision;
    }
    _;
    if (isTopLevelCall) {
      initializing = false;
    }
  }
  /**
   * @notice Returns the revision number of the contract
   * @dev Needs to be defined in the inherited class as a constant.
   * @return The revision number
   */
  function getRevision() internal pure virtual returns (uint256);
  /**
   * @notice Returns true if and only if the function is running in the constructor
   * @return True if the function is running in the constructor
   */
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    uint256 cs;
    //solium-disable-next-line
    assembly {
      cs := extcodesize(address())
    }
    return cs == 0;
  }
  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE = '62'; // 'User is in isolation mode'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;
  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;
  uint256 internal constant WAD_RAY_RATIO = 1e9;
  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }
  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }
  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }
  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }
  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }
  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)
      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library DataTypes {
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }
  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62-63: reserved
    //bit 64-79: reserve factor
    //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167 liquidation protocol fee
    //bit 168-175 eMode category
    //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252-255 unused
    uint256 data;
  }
  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }
  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }
  enum InterestRateMode {
    NONE,
    STABLE,
    VARIABLE
  }
  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }
  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }
  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }
  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }
  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }
  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }
  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }
  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }
  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }
  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }
  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    address aToken;
  }
  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {IERC20} from '../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {SafeCast} from '../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {VersionedInitializable} from '../libraries/aave-upgradeability/VersionedInitializable.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {WadRayMath} from '../libraries/math/WadRayMath.sol';
import {IPool} from '../../interfaces/IPool.sol';
import {IAToken} from '../../interfaces/IAToken.sol';
import {IAaveIncentivesController} from '../../interfaces/IAaveIncentivesController.sol';
import {IInitializableAToken} from '../../interfaces/IInitializableAToken.sol';
import {ScaledBalanceTokenBase} from './base/ScaledBalanceTokenBase.sol';
import {IncentivizedERC20} from './base/IncentivizedERC20.sol';
import {EIP712Base} from './base/EIP712Base.sol';
/**
 * @title Aave ERC20 AToken
 * @author Aave
 * @notice Implementation of the interest bearing token for the Aave protocol
 */
contract AToken is VersionedInitializable, ScaledBalanceTokenBase, EIP712Base, IAToken {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  bytes32 public constant PERMIT_TYPEHASH =
    keccak256('Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)');
  uint256 public constant ATOKEN_REVISION = 0x1;
  address internal _treasury;
  address internal _underlyingAsset;
  /// @inheritdoc VersionedInitializable
  function getRevision() internal pure virtual override returns (uint256) {
    return ATOKEN_REVISION;
  }
  /**
   * @dev Constructor.
   * @param pool The address of the Pool contract
   */
  constructor(IPool pool)
    ScaledBalanceTokenBase(pool, 'ATOKEN_IMPL', 'ATOKEN_IMPL', 0)
    EIP712Base()
  {
    // Intentionally left blank
  }
  /// @inheritdoc IInitializableAToken
  function initialize(
    IPool initializingPool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) public virtual override initializer {
    require(initializingPool == POOL, Errors.POOL_ADDRESSES_DO_NOT_MATCH);
    _setName(aTokenName);
    _setSymbol(aTokenSymbol);
    _setDecimals(aTokenDecimals);
    _treasury = treasury;
    _underlyingAsset = underlyingAsset;
    _incentivesController = incentivesController;
    _domainSeparator = _calculateDomainSeparator();
    emit Initialized(
      underlyingAsset,
      address(POOL),
      treasury,
      address(incentivesController),
      aTokenDecimals,
      aTokenName,
      aTokenSymbol,
      params
    );
  }
  /// @inheritdoc IAToken
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external virtual override onlyPool returns (bool) {
    return _mintScaled(caller, onBehalfOf, amount, index);
  }
  /// @inheritdoc IAToken
  function burn(
    address from,
    address receiverOfUnderlying,
    uint256 amount,
    uint256 index
  ) external virtual override onlyPool {
    _burnScaled(from, receiverOfUnderlying, amount, index);
    if (receiverOfUnderlying != address(this)) {
      IERC20(_underlyingAsset).safeTransfer(receiverOfUnderlying, amount);
    }
  }
  /// @inheritdoc IAToken
  function mintToTreasury(uint256 amount, uint256 index) external virtual override onlyPool {
    if (amount == 0) {
      return;
    }
    _mintScaled(address(POOL), _treasury, amount, index);
  }
  /// @inheritdoc IAToken
  function transferOnLiquidation(
    address from,
    address to,
    uint256 value
  ) external virtual override onlyPool {
    // Being a normal transfer, the Transfer() and BalanceTransfer() are emitted
    // so no need to emit a specific event here
    _transfer(from, to, value, false);
  }
  /// @inheritdoc IERC20
  function balanceOf(address user)
    public
    view
    virtual
    override(IncentivizedERC20, IERC20)
    returns (uint256)
  {
    return super.balanceOf(user).rayMul(POOL.getReserveNormalizedIncome(_underlyingAsset));
  }
  /// @inheritdoc IERC20
  function totalSupply() public view virtual override(IncentivizedERC20, IERC20) returns (uint256) {
    uint256 currentSupplyScaled = super.totalSupply();
    if (currentSupplyScaled == 0) {
      return 0;
    }
    return currentSupplyScaled.rayMul(POOL.getReserveNormalizedIncome(_underlyingAsset));
  }
  /// @inheritdoc IAToken
  function RESERVE_TREASURY_ADDRESS() external view override returns (address) {
    return _treasury;
  }
  /// @inheritdoc IAToken
  function UNDERLYING_ASSET_ADDRESS() external view override returns (address) {
    return _underlyingAsset;
  }
  /// @inheritdoc IAToken
  function transferUnderlyingTo(address target, uint256 amount) external virtual override onlyPool {
    IERC20(_underlyingAsset).safeTransfer(target, amount);
  }
  /// @inheritdoc IAToken
  function handleRepayment(
    address user,
    address onBehalfOf,
    uint256 amount
  ) external virtual override onlyPool {
    // Intentionally left blank
  }
  /// @inheritdoc IAToken
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external override {
    require(owner != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    //solium-disable-next-line
    require(block.timestamp <= deadline, Errors.INVALID_EXPIRATION);
    uint256 currentValidNonce = _nonces[owner];
    bytes32 digest = keccak256(
      abi.encodePacked(
        '\\x19\\x01',
        DOMAIN_SEPARATOR(),
        keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, currentValidNonce, deadline))
      )
    );
    require(owner == ecrecover(digest, v, r, s), Errors.INVALID_SIGNATURE);
    _nonces[owner] = currentValidNonce + 1;
    _approve(owner, spender, value);
  }
  /**
   * @notice Transfers the aTokens between two users. Validates the transfer
   * (ie checks for valid HF after the transfer) if required
   * @param from The source address
   * @param to The destination address
   * @param amount The amount getting transferred
   * @param validate True if the transfer needs to be validated, false otherwise
   */
  function _transfer(
    address from,
    address to,
    uint256 amount,
    bool validate
  ) internal virtual {
    address underlyingAsset = _underlyingAsset;
    uint256 index = POOL.getReserveNormalizedIncome(underlyingAsset);
    uint256 fromBalanceBefore = super.balanceOf(from).rayMul(index);
    uint256 toBalanceBefore = super.balanceOf(to).rayMul(index);
    super._transfer(from, to, amount, index);
    if (validate) {
      POOL.finalizeTransfer(underlyingAsset, from, to, amount, fromBalanceBefore, toBalanceBefore);
    }
    emit BalanceTransfer(from, to, amount.rayDiv(index), index);
  }
  /**
   * @notice Overrides the parent _transfer to force validated transfer() and transferFrom()
   * @param from The source address
   * @param to The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(
    address from,
    address to,
    uint128 amount
  ) internal virtual override {
    _transfer(from, to, amount, true);
  }
  /**
   * @dev Overrides the base function to fully implement IAToken
   * @dev see `EIP712Base.DOMAIN_SEPARATOR()` for more detailed documentation
   */
  function DOMAIN_SEPARATOR() public view override(IAToken, EIP712Base) returns (bytes32) {
    return super.DOMAIN_SEPARATOR();
  }
  /**
   * @dev Overrides the base function to fully implement IAToken
   * @dev see `EIP712Base.nonces()` for more detailed documentation
   */
  function nonces(address owner) public view override(IAToken, EIP712Base) returns (uint256) {
    return super.nonces(owner);
  }
  /// @inheritdoc EIP712Base
  function _EIP712BaseId() internal view override returns (string memory) {
    return name();
  }
  /// @inheritdoc IAToken
  function rescueTokens(
    address token,
    address to,
    uint256 amount
  ) external override onlyPoolAdmin {
    require(token != _underlyingAsset, Errors.UNDERLYING_CANNOT_BE_RESCUED);
    IERC20(token).safeTransfer(to, amount);
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
/**
 * @title EIP712Base
 * @author Aave
 * @notice Base contract implementation of EIP712.
 */
abstract contract EIP712Base {
  bytes public constant EIP712_REVISION = bytes('1');
  bytes32 internal constant EIP712_DOMAIN =
    keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)');
  // Map of address nonces (address => nonce)
  mapping(address => uint256) internal _nonces;
  bytes32 internal _domainSeparator;
  uint256 internal immutable _chainId;
  /**
   * @dev Constructor.
   */
  constructor() {
    _chainId = block.chainid;
  }
  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
    if (block.chainid == _chainId) {
      return _domainSeparator;
    }
    return _calculateDomainSeparator();
  }
  /**
   * @notice Returns the nonce value for address specified as parameter
   * @param owner The address for which the nonce is being returned
   * @return The nonce value for the input address`
   */
  function nonces(address owner) public view virtual returns (uint256) {
    return _nonces[owner];
  }
  /**
   * @notice Compute the current domain separator
   * @return The domain separator for the token
   */
  function _calculateDomainSeparator() internal view returns (bytes32) {
    return
      keccak256(
        abi.encode(
          EIP712_DOMAIN,
          keccak256(bytes(_EIP712BaseId())),
          keccak256(EIP712_REVISION),
          block.chainid,
          address(this)
        )
      );
  }
  /**
   * @notice Returns the user readable name of signing domain (e.g. token name)
   * @return The name of the signing domain
   */
  function _EIP712BaseId() internal view virtual returns (string memory);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IACLManager} from '../../../interfaces/IACLManager.sol';
/**
 * @title IncentivizedERC20
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 * @notice Basic ERC20 implementation
 */
abstract contract IncentivizedERC20 is Context, IERC20Detailed {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    IACLManager aclManager = IACLManager(_addressesProvider.getACLManager());
    require(aclManager.isPoolAdmin(msg.sender), Errors.CALLER_NOT_POOL_ADMIN);
    _;
  }
  /**
   * @dev Only pool can call functions marked by this modifier.
   */
  modifier onlyPool() {
    require(_msgSender() == address(POOL), Errors.CALLER_MUST_BE_POOL);
    _;
  }
  /**
   * @dev UserState - additionalData is a flexible field.
   * ATokens and VariableDebtTokens use this field store the index of the
   * user's last supply/withdrawal/borrow/repayment. StableDebtTokens use
   * this field to store the user's stable rate.
   */
  struct UserState {
    uint128 balance;
    uint128 additionalData;
  }
  // Map of users address and their state data (userAddress => userStateData)
  mapping(address => UserState) internal _userState;
  // Map of allowances (delegator => delegatee => allowanceAmount)
  mapping(address => mapping(address => uint256)) private _allowances;
  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  IAaveIncentivesController internal _incentivesController;
  IPoolAddressesProvider internal immutable _addressesProvider;
  IPool public immutable POOL;
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) {
    _addressesProvider = pool.ADDRESSES_PROVIDER();
    _name = name;
    _symbol = symbol;
    _decimals = decimals;
    POOL = pool;
  }
  /// @inheritdoc IERC20Detailed
  function name() public view override returns (string memory) {
    return _name;
  }
  /// @inheritdoc IERC20Detailed
  function symbol() external view override returns (string memory) {
    return _symbol;
  }
  /// @inheritdoc IERC20Detailed
  function decimals() external view override returns (uint8) {
    return _decimals;
  }
  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }
  /// @inheritdoc IERC20
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _userState[account].balance;
  }
  /**
   * @notice Returns the address of the Incentives Controller contract
   * @return The address of the Incentives Controller
   */
  function getIncentivesController() external view virtual returns (IAaveIncentivesController) {
    return _incentivesController;
  }
  /**
   * @notice Sets a new Incentives Controller
   * @param controller the new Incentives controller
   */
  function setIncentivesController(IAaveIncentivesController controller) external onlyPoolAdmin {
    _incentivesController = controller;
  }
  /// @inheritdoc IERC20
  function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _transfer(_msgSender(), recipient, castAmount);
    return true;
  }
  /// @inheritdoc IERC20
  function allowance(address owner, address spender)
    external
    view
    virtual
    override
    returns (uint256)
  {
    return _allowances[owner][spender];
  }
  /// @inheritdoc IERC20
  function approve(address spender, uint256 amount) external virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }
  /// @inheritdoc IERC20
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - castAmount);
    _transfer(sender, recipient, castAmount);
    return true;
  }
  /**
   * @notice Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   */
  function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
    return true;
  }
  /**
   * @notice Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   */
  function decreaseAllowance(address spender, uint256 subtractedValue)
    external
    virtual
    returns (bool)
  {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
    return true;
  }
  /**
   * @notice Transfers tokens between two users and apply incentives if defined.
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(
    address sender,
    address recipient,
    uint128 amount
  ) internal virtual {
    uint128 oldSenderBalance = _userState[sender].balance;
    _userState[sender].balance = oldSenderBalance - amount;
    uint128 oldRecipientBalance = _userState[recipient].balance;
    _userState[recipient].balance = oldRecipientBalance + amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      incentivesControllerLocal.handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        incentivesControllerLocal.handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }
  /**
   * @notice Approve `spender` to use `amount` of `owner`s balance
   * @param owner The address owning the tokens
   * @param spender The address approved for spending
   * @param amount The amount of tokens to approve spending of
   */
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }
  /**
   * @notice Update the name of the token
   * @param newName The new name for the token
   */
  function _setName(string memory newName) internal {
    _name = newName;
  }
  /**
   * @notice Update the symbol for the token
   * @param newSymbol The new symbol for the token
   */
  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }
  /**
   * @notice Update the number of decimals for the token
   * @param newDecimals The new number of decimals for the token
   */
  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IncentivizedERC20} from './IncentivizedERC20.sol';
/**
 * @title MintableIncentivizedERC20
 * @author Aave
 * @notice Implements mint and burn functions for IncentivizedERC20
 */
abstract contract MintableIncentivizedERC20 is IncentivizedERC20 {
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) IncentivizedERC20(pool, name, symbol, decimals) {
    // Intentionally left blank
  }
  /**
   * @notice Mints tokens to an account and apply incentives if defined
   * @param account The address receiving tokens
   * @param amount The amount of tokens to mint
   */
  function _mint(address account, uint128 amount) internal virtual {
    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply + amount;
    uint128 oldAccountBalance = _userState[account].balance;
    _userState[account].balance = oldAccountBalance + amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      incentivesControllerLocal.handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }
  /**
   * @notice Burns tokens from an account and apply incentives if defined
   * @param account The account whose tokens are burnt
   * @param amount The amount of tokens to burn
   */
  function _burn(address account, uint128 amount) internal virtual {
    uint256 oldTotalSupply = _totalSupply;
    _totalSupply = oldTotalSupply - amount;
    uint128 oldAccountBalance = _userState[account].balance;
    _userState[account].balance = oldAccountBalance - amount;
    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      incentivesControllerLocal.handleAction(account, oldTotalSupply, oldAccountBalance);
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {MintableIncentivizedERC20} from './MintableIncentivizedERC20.sol';
/**
 * @title ScaledBalanceTokenBase
 * @author Aave
 * @notice Basic ERC20 implementation of scaled balance token
 */
abstract contract ScaledBalanceTokenBase is MintableIncentivizedERC20, IScaledBalanceToken {
  using WadRayMath for uint256;
  using SafeCast for uint256;
  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name The name of the token
   * @param symbol The symbol of the token
   * @param decimals The number of decimals of the token
   */
  constructor(
    IPool pool,
    string memory name,
    string memory symbol,
    uint8 decimals
  ) MintableIncentivizedERC20(pool, name, symbol, decimals) {
    // Intentionally left blank
  }
  /// @inheritdoc IScaledBalanceToken
  function scaledBalanceOf(address user) external view override returns (uint256) {
    return super.balanceOf(user);
  }
  /// @inheritdoc IScaledBalanceToken
  function getScaledUserBalanceAndSupply(address user)
    external
    view
    override
    returns (uint256, uint256)
  {
    return (super.balanceOf(user), super.totalSupply());
  }
  /// @inheritdoc IScaledBalanceToken
  function scaledTotalSupply() public view virtual override returns (uint256) {
    return super.totalSupply();
  }
  /// @inheritdoc IScaledBalanceToken
  function getPreviousIndex(address user) external view virtual override returns (uint256) {
    return _userState[user].additionalData;
  }
  /**
   * @notice Implements the basic logic to mint a scaled balance token.
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the scaled tokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function _mintScaled(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) internal returns (bool) {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.INVALID_MINT_AMOUNT);
    uint256 scaledBalance = super.balanceOf(onBehalfOf);
    uint256 balanceIncrease = scaledBalance.rayMul(index) -
      scaledBalance.rayMul(_userState[onBehalfOf].additionalData);
    _userState[onBehalfOf].additionalData = index.toUint128();
    _mint(onBehalfOf, amountScaled.toUint128());
    uint256 amountToMint = amount + balanceIncrease;
    emit Transfer(address(0), onBehalfOf, amountToMint);
    emit Mint(caller, onBehalfOf, amountToMint, balanceIncrease, index);
    return (scaledBalance == 0);
  }
  /**
   * @notice Implements the basic logic to burn a scaled balance token.
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param user The user which debt is burnt
   * @param target The address that will receive the underlying, if any
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   */
  function _burnScaled(
    address user,
    address target,
    uint256 amount,
    uint256 index
  ) internal {
    uint256 amountScaled = amount.rayDiv(index);
    require(amountScaled != 0, Errors.INVALID_BURN_AMOUNT);
    uint256 scaledBalance = super.balanceOf(user);
    uint256 balanceIncrease = scaledBalance.rayMul(index) -
      scaledBalance.rayMul(_userState[user].additionalData);
    _userState[user].additionalData = index.toUint128();
    _burn(user, amountScaled.toUint128());
    if (balanceIncrease > amount) {
      uint256 amountToMint = balanceIncrease - amount;
      emit Transfer(address(0), user, amountToMint);
      emit Mint(user, user, amountToMint, balanceIncrease, index);
    } else {
      uint256 amountToBurn = amount - balanceIncrease;
      emit Transfer(user, address(0), amountToBurn);
      emit Burn(user, target, amountToBurn, balanceIncrease, index);
    }
  }
  /**
   * @notice Implements the basic logic to transfer scaled balance tokens between two users
   * @dev It emits a mint event with the interest accrued per user
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   * @param index The next liquidity index of the reserve
   */
  function _transfer(
    address sender,
    address recipient,
    uint256 amount,
    uint256 index
  ) internal {
    uint256 senderScaledBalance = super.balanceOf(sender);
    uint256 senderBalanceIncrease = senderScaledBalance.rayMul(index) -
      senderScaledBalance.rayMul(_userState[sender].additionalData);
    uint256 recipientScaledBalance = super.balanceOf(recipient);
    uint256 recipientBalanceIncrease = recipientScaledBalance.rayMul(index) -
      recipientScaledBalance.rayMul(_userState[recipient].additionalData);
    _userState[sender].additionalData = index.toUint128();
    _userState[recipient].additionalData = index.toUint128();
    super._transfer(sender, recipient, amount.rayDiv(index).toUint128());
    if (senderBalanceIncrease > 0) {
      emit Transfer(address(0), sender, senderBalanceIncrease);
      emit Mint(_msgSender(), sender, senderBalanceIncrease, senderBalanceIncrease, index);
    }
    if (sender != recipient && recipientBalanceIncrease > 0) {
      emit Transfer(address(0), recipient, recipientBalanceIncrease);
      emit Mint(_msgSender(), recipient, recipientBalanceIncrease, recipientBalanceIncrease, index);
    }
    emit Transfer(sender, recipient, amount);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {WadRayMath} from '../protocol/libraries/math/WadRayMath.sol';
import {PercentageMath} from '../protocol/libraries/math/PercentageMath.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
import {Errors} from '../protocol/libraries/helpers/Errors.sol';
import {IDefaultInterestRateStrategyV2} from '../interfaces/IDefaultInterestRateStrategyV2.sol';
import {IReserveInterestRateStrategy} from '../interfaces/IReserveInterestRateStrategy.sol';
import {IPoolAddressesProvider} from '../interfaces/IPoolAddressesProvider.sol';
/**
 * @title DefaultReserveInterestRateStrategyV2 contract
 * @author BGD Labs
 * @notice Default interest rate strategy used by the Aave protocol
 * @dev Strategies are pool-specific: each contract CAN'T be used across different Aave pools
 *   due to the caching of the PoolAddressesProvider and the usage of underlying addresses as
 *   index of the _interestRateData
 */
contract DefaultReserveInterestRateStrategyV2 is IDefaultInterestRateStrategyV2 {
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  struct CalcInterestRatesLocalVars {
    uint256 availableLiquidity;
    uint256 currentVariableBorrowRate;
    uint256 currentLiquidityRate;
    uint256 borrowUsageRatio;
    uint256 supplyUsageRatio;
    uint256 availableLiquidityPlusDebt;
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  IPoolAddressesProvider public immutable ADDRESSES_PROVIDER;
  /// @inheritdoc IDefaultInterestRateStrategyV2
  uint256 public constant MAX_BORROW_RATE = 1000_00;
  /// @inheritdoc IDefaultInterestRateStrategyV2
  uint256 public constant MIN_OPTIMAL_POINT = 1_00;
  /// @inheritdoc IDefaultInterestRateStrategyV2
  uint256 public constant MAX_OPTIMAL_POINT = 99_00;
  /// @dev Map of reserves address and their interest rate data (reserveAddress => interestRateData)
  mapping(address => InterestRateData) internal _interestRateData;
  modifier onlyPoolConfigurator() {
    require(
      msg.sender == ADDRESSES_PROVIDER.getPoolConfigurator(),
      Errors.CALLER_NOT_POOL_CONFIGURATOR
    );
    _;
  }
  /**
   * @dev Constructor.
   * @param provider The address of the PoolAddressesProvider of the associated Aave pool
   */
  constructor(address provider) {
    require(provider != address(0), Errors.INVALID_ADDRESSES_PROVIDER);
    ADDRESSES_PROVIDER = IPoolAddressesProvider(provider);
  }
  /// @inheritdoc IReserveInterestRateStrategy
  function setInterestRateParams(
    address reserve,
    bytes calldata rateData
  ) external onlyPoolConfigurator {
    _setInterestRateParams(reserve, abi.decode(rateData, (InterestRateData)));
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function setInterestRateParams(
    address reserve,
    InterestRateData calldata rateData
  ) external onlyPoolConfigurator {
    _setInterestRateParams(reserve, rateData);
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getInterestRateData(address reserve) external view returns (InterestRateDataRay memory) {
    return _rayifyRateData(_interestRateData[reserve]);
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getInterestRateDataBps(address reserve) external view returns (InterestRateData memory) {
    return _interestRateData[reserve];
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getOptimalUsageRatio(address reserve) external view returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].optimalUsageRatio));
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getVariableRateSlope1(address reserve) external view returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].variableRateSlope1));
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getVariableRateSlope2(address reserve) external view returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].variableRateSlope2));
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getBaseVariableBorrowRate(address reserve) external view override returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].baseVariableBorrowRate));
  }
  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getMaxVariableBorrowRate(address reserve) external view override returns (uint256) {
    return
      _bpsToRay(
        uint256(
          _interestRateData[reserve].baseVariableBorrowRate +
            _interestRateData[reserve].variableRateSlope1 +
            _interestRateData[reserve].variableRateSlope2
        )
      );
  }
  /// @inheritdoc IReserveInterestRateStrategy
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view virtual override returns (uint256, uint256) {
    InterestRateDataRay memory rateData = _rayifyRateData(_interestRateData[params.reserve]);
    // @note This is a short circuit to allow mintable assets (ex. GHO), which by definition cannot be supplied
    // and thus do not use virtual underlying balances.
    if (!params.usingVirtualBalance) {
      return (0, rateData.baseVariableBorrowRate);
    }
    CalcInterestRatesLocalVars memory vars;
    vars.currentLiquidityRate = 0;
    vars.currentVariableBorrowRate = rateData.baseVariableBorrowRate;
    if (params.totalDebt != 0) {
      vars.availableLiquidity =
        params.virtualUnderlyingBalance +
        params.liquidityAdded -
        params.liquidityTaken;
      vars.availableLiquidityPlusDebt = vars.availableLiquidity + params.totalDebt;
      vars.borrowUsageRatio = params.totalDebt.rayDiv(vars.availableLiquidityPlusDebt);
      vars.supplyUsageRatio = params.totalDebt.rayDiv(
        vars.availableLiquidityPlusDebt + params.unbacked
      );
    } else {
      return (0, vars.currentVariableBorrowRate);
    }
    if (vars.borrowUsageRatio > rateData.optimalUsageRatio) {
      uint256 excessBorrowUsageRatio = (vars.borrowUsageRatio - rateData.optimalUsageRatio).rayDiv(
        WadRayMath.RAY - rateData.optimalUsageRatio
      );
      vars.currentVariableBorrowRate +=
        rateData.variableRateSlope1 +
        rateData.variableRateSlope2.rayMul(excessBorrowUsageRatio);
    } else {
      vars.currentVariableBorrowRate += rateData
        .variableRateSlope1
        .rayMul(vars.borrowUsageRatio)
        .rayDiv(rateData.optimalUsageRatio);
    }
    vars.currentLiquidityRate = vars
      .currentVariableBorrowRate
      .rayMul(vars.supplyUsageRatio)
      .percentMul(PercentageMath.PERCENTAGE_FACTOR - params.reserveFactor);
    return (vars.currentLiquidityRate, vars.currentVariableBorrowRate);
  }
  /**
   * @dev Doing validations and data update for an asset
   * @param reserve address of the underlying asset of the reserve
   * @param rateData Encoded reserve interest rate data to apply
   */
  function _setInterestRateParams(address reserve, InterestRateData memory rateData) internal {
    require(reserve != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    require(
      rateData.optimalUsageRatio <= MAX_OPTIMAL_POINT &&
        rateData.optimalUsageRatio >= MIN_OPTIMAL_POINT,
      Errors.INVALID_OPTIMAL_USAGE_RATIO
    );
    require(
      rateData.variableRateSlope1 <= rateData.variableRateSlope2,
      Errors.SLOPE_2_MUST_BE_GTE_SLOPE_1
    );
    // The maximum rate should not be above certain threshold
    require(
      uint256(rateData.baseVariableBorrowRate) +
        uint256(rateData.variableRateSlope1) +
        uint256(rateData.variableRateSlope2) <=
        MAX_BORROW_RATE,
      Errors.INVALID_MAX_RATE
    );
    _interestRateData[reserve] = rateData;
    emit RateDataUpdate(
      reserve,
      rateData.optimalUsageRatio,
      rateData.baseVariableBorrowRate,
      rateData.variableRateSlope1,
      rateData.variableRateSlope2
    );
  }
  /**
   * @dev Transforms an InterestRateData struct to an InterestRateDataRay struct by multiplying all values
   * by 1e23, turning them into ray values
   *
   * @param data The InterestRateData struct to transform
   *
   * @return The resulting InterestRateDataRay struct
   */
  function _rayifyRateData(
    InterestRateData memory data
  ) internal pure returns (InterestRateDataRay memory) {
    return
      InterestRateDataRay({
        optimalUsageRatio: _bpsToRay(uint256(data.optimalUsageRatio)),
        baseVariableBorrowRate: _bpsToRay(uint256(data.baseVariableBorrowRate)),
        variableRateSlope1: _bpsToRay(uint256(data.variableRateSlope1)),
        variableRateSlope2: _bpsToRay(uint256(data.variableRateSlope2))
      });
  }
  // @dev helper function added here, as generally the protocol doesn't use bps
  function _bpsToRay(uint256 n) internal pure returns (uint256) {
    return n * 1e23;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);
  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);
  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;
  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;
  uint256 internal constant WAD_RAY_RATIO = 1e9;
  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }
  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }
  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }
  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }
      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }
  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }
  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)
      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
  // Maximum percentage factor (100.00%)
  uint256 internal constant PERCENTAGE_FACTOR = 1e4;
  // Half percentage factor (50.00%)
  uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;
  /**
   * @notice Executes a percentage multiplication
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentmul percentage
   */
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
    assembly {
      if iszero(
        or(
          iszero(percentage),
          iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
        )
      ) {
        revert(0, 0)
      }
      result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
    }
  }
  /**
   * @notice Executes a percentage division
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentdiv percentage
   */
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
    assembly {
      if or(
        iszero(percentage),
        iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
      ) {
        revert(0, 0)
      }
      result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
    }
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 __deprecatedStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }
  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused
    uint256 data;
  }
  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }
  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }
  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }
  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }
  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }
  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }
  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }
  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }
  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }
  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }
  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }
  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }
  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }
  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }
  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }
  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }
  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }
  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }
  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }
  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IReserveInterestRateStrategy} from './IReserveInterestRateStrategy.sol';
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
/**
 * @title IDefaultInterestRateStrategyV2
 * @author BGD Labs
 * @notice Interface of the default interest rate strategy used by the Aave protocol
 */
interface IDefaultInterestRateStrategyV2 is IReserveInterestRateStrategy {
  /**
   * @notice Holds the interest rate data for a given reserve
   *
   * @dev Since values are in bps, they are multiplied by 1e23 in order to become rays with 27 decimals. This
   * in turn means that the maximum supported interest rate is 4294967295 (2**32-1) bps or 42949672.95%.
   *
   * @param optimalUsageRatio The optimal usage ratio, in bps
   * @param baseVariableBorrowRate The base variable borrow rate, in bps
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio, in bps
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio, in bps
   */
  struct InterestRateData {
    uint16 optimalUsageRatio;
    uint32 baseVariableBorrowRate;
    uint32 variableRateSlope1;
    uint32 variableRateSlope2;
  }
  /**
   * @notice The interest rate data, where all values are in ray (fixed-point 27 decimal numbers) for a given reserve,
   * used in in-memory calculations.
   *
   * @param optimalUsageRatio The optimal usage ratio
   * @param baseVariableBorrowRate The base variable borrow rate
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio
   */
  struct InterestRateDataRay {
    uint256 optimalUsageRatio;
    uint256 baseVariableBorrowRate;
    uint256 variableRateSlope1;
    uint256 variableRateSlope2;
  }
  /**
   * @notice emitted when new interest rate data is set in a reserve
   *
   * @param reserve address of the reserve that has new interest rate data set
   * @param optimalUsageRatio The optimal usage ratio, in bps
   * @param baseVariableBorrowRate The base variable borrow rate, in bps
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio, in bps
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio, in bps
   */
  event RateDataUpdate(
    address indexed reserve,
    uint256 optimalUsageRatio,
    uint256 baseVariableBorrowRate,
    uint256 variableRateSlope1,
    uint256 variableRateSlope2
  );
  /**
   * @notice Returns the address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
  /**
   * @notice Returns the maximum value achievable for variable borrow rate, in bps
   * @return The maximum rate
   */
  function MAX_BORROW_RATE() external view returns (uint256);
  /**
   * @notice Returns the minimum optimal point, in bps
   * @return The optimal point
   */
  function MIN_OPTIMAL_POINT() external view returns (uint256);
  /**
   * @notice Returns the maximum optimal point, in bps
   * @return The optimal point
   */
  function MAX_OPTIMAL_POINT() external view returns (uint256);
  /**
   * notice Returns the full InterestRateData object for the given reserve, in ray
   *
   * @param reserve The reserve to get the data of
   *
   * @return The InterestRateDataRay object for the given reserve
   */
  function getInterestRateData(address reserve) external view returns (InterestRateDataRay memory);
  /**
   * notice Returns the full InterestRateDataRay object for the given reserve, in bps
   *
   * @param reserve The reserve to get the data of
   *
   * @return The InterestRateData object for the given reserve
   */
  function getInterestRateDataBps(address reserve) external view returns (InterestRateData memory);
  /**
   * @notice Returns the optimal usage rate for the given reserve in ray
   *
   * @param reserve The reserve to get the optimal usage rate of
   *
   * @return The optimal usage rate is the level of borrow / collateral at which the borrow rate
   */
  function getOptimalUsageRatio(address reserve) external view returns (uint256);
  /**
   * @notice Returns the variable rate slope below optimal usage ratio in ray
   * @dev It's the variable rate when usage ratio > 0 and <= OPTIMAL_USAGE_RATIO
   *
   * @param reserve The reserve to get the variable rate slope 1 of
   *
   * @return The variable rate slope
   */
  function getVariableRateSlope1(address reserve) external view returns (uint256);
  /**
   * @notice Returns the variable rate slope above optimal usage ratio in ray
   * @dev It's the variable rate when usage ratio > OPTIMAL_USAGE_RATIO
   *
   * @param reserve The reserve to get the variable rate slope 2 of
   *
   * @return The variable rate slope
   */
  function getVariableRateSlope2(address reserve) external view returns (uint256);
  /**
   * @notice Returns the base variable borrow rate, in ray
   *
   * @param reserve The reserve to get the base variable borrow rate of
   *
   * @return The base variable borrow rate
   */
  function getBaseVariableBorrowRate(address reserve) external view returns (uint256);
  /**
   * @notice Returns the maximum variable borrow rate, in ray
   *
   * @param reserve The reserve to get the maximum variable borrow rate of
   *
   * @return The maximum variable borrow rate
   */
  function getMaxVariableBorrowRate(address reserve) external view returns (uint256);
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The reserve interest rate data to apply to the given reserve
   *   Being specific to this custom implementation, with custom struct type,
   *   overloading the function on the generic interface
   */
  function setInterestRateParams(address reserve, InterestRateData calldata rateData) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
 * @title IReserveInterestRateStrategy
 * @author BGD Labs
 * @notice Basic interface for any rate strategy used by the Aave protocol
 */
interface IReserveInterestRateStrategy {
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The abi encoded reserve interest rate data to apply to the given reserve
   *   Abstracted this way as rate strategies can be custom
   */
  function setInterestRateParams(address reserve, bytes calldata rateData) external;
  /**
   * @notice Calculates the interest rates depending on the reserve's state and configurations
   * @param params The parameters needed to calculate interest rates
   * @return liquidityRate The liquidity rate expressed in ray
   * @return variableBorrowRate The variable borrow rate expressed in ray
   */
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view returns (uint256, uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );
  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );
  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);
  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;
  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);
  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;
  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);
  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;
  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);
  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);
  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;
  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);
  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;
  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);
  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;
  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);
  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;
  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);
  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
    // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
    // for accounts without code, i.e. `keccak256('')`
    bytes32 codehash;
    bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      codehash := extcodehash(account)
    }
    return (codehash != accountHash && codehash != 0x0);
  }
  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');
    // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './Proxy.sol';
import '../contracts/Address.sol';
/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);
  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT =
    0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
  /**
   * @dev Returns the current implementation.
   * @return impl Address of the current implementation
   */
  function _implementation() internal view override returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      impl := sload(slot)
    }
  }
  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }
  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(
      Address.isContract(newImplementation),
      'Cannot set a proxy implementation to a non-contract address'
    );
    bytes32 slot = IMPLEMENTATION_SLOT;
    //solium-disable-next-line
    assembly {
      sstore(slot, newImplementation)
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import './BaseUpgradeabilityProxy.sol';
/**
 * @title InitializableUpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with an initializer for initializing
 * implementation and init data.
 */
contract InitializableUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract initializer.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  function initialize(address _logic, bytes memory _data) public payable {
    require(_implementation() == address(0));
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if (_data.length > 0) {
      (bool success, ) = _logic.delegatecall(_data);
      require(success);
    }
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
abstract contract Proxy {
  /**
   * @dev Fallback function.
   * Will run if no other function in the contract matches the call data.
   * Implemented entirely in `_fallback`.
   */
  fallback() external payable {
    _fallback();
  }
  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view virtual returns (address);
  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    //solium-disable-next-line
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())
      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())
      switch result
      // delegatecall returns 0 on error.
      case 0 {
        revert(0, returndatasize())
      }
      default {
        return(0, returndatasize())
      }
    }
  }
  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal virtual {}
  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {BaseUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/BaseUpgradeabilityProxy.sol';
/**
 * @title BaseImmutableAdminUpgradeabilityProxy
 * @author Aave, inspired by the OpenZeppelin upgradeability proxy pattern
 * @notice This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * @dev The admin role is stored in an immutable, which helps saving transactions costs
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseImmutableAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  address internal immutable _admin;
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) {
    _admin = admin;
  }
  modifier ifAdmin() {
    if (msg.sender == _admin) {
      _;
    } else {
      _fallback();
    }
  }
  /**
   * @notice Return the admin address
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin;
  }
  /**
   * @notice Return the implementation address
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }
  /**
   * @notice Upgrade the backing implementation of the proxy.
   * @dev Only the admin can call this function.
   * @param newImplementation The address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }
  /**
   * @notice Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * @dev This is useful to initialize the proxied contract.
   * @param newImplementation The address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data)
    external
    payable
    ifAdmin
  {
    _upgradeTo(newImplementation);
    (bool success, ) = newImplementation.delegatecall(data);
    require(success);
  }
  /**
   * @notice Only fall back when the sender is not the admin.
   */
  function _willFallback() internal virtual override {
    require(msg.sender != _admin, 'Cannot call fallback function from the proxy admin');
    super._willFallback();
  }
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.10;
import {InitializableUpgradeabilityProxy} from '../../../dependencies/openzeppelin/upgradeability/InitializableUpgradeabilityProxy.sol';
import {Proxy} from '../../../dependencies/openzeppelin/upgradeability/Proxy.sol';
import {BaseImmutableAdminUpgradeabilityProxy} from './BaseImmutableAdminUpgradeabilityProxy.sol';
/**
 * @title InitializableAdminUpgradeabilityProxy
 * @author Aave
 * @dev Extends BaseAdminUpgradeabilityProxy with an initializer function
 */
contract InitializableImmutableAdminUpgradeabilityProxy is
  BaseImmutableAdminUpgradeabilityProxy,
  InitializableUpgradeabilityProxy
{
  /**
   * @dev Constructor.
   * @param admin The address of the admin
   */
  constructor(address admin) BaseImmutableAdminUpgradeabilityProxy(admin) {
    // Intentionally left blank
  }
  /// @inheritdoc BaseImmutableAdminUpgradeabilityProxy
  function _willFallback() internal override(BaseImmutableAdminUpgradeabilityProxy, Proxy) {
    BaseImmutableAdminUpgradeabilityProxy._willFallback();
  }
}