// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Genie.xyz
/// @author: manifold.xyz
import "./ERC1155Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////
//                                                                                        //
//                                                                                        //
//                                                                                        //
//                                                                                        //
//                                    (((((((   (((((((                                   //
//                                  (((((((((   (((((((((                                 //
//                                 ((((((((((   ((((((((((                                //
//                                 (((((((((    ((((((((((                                //
//                   ((((((((((   ((((((((((     ((((((((((   ((((((((((                  //
//                 ((((((((((((((((((((((((      (((((((((((((((((((((((((                //
//                 ((((((((((((((((((((((((       ((((((((((((((((((((((((                //
//              ((      ((((((((((((((((((         ((((((((((((((((((      ((             //
//             (((((((         (((((((                 (((((((         (((((((            //
//            (((((((((((                                           (((((((((((           //
//            ((((((((((((((                                     ((((((((((((((           //
//              ((((((((((((((                                 ((((((((((((((             //
//                 ((((((((((((                               ((((((((((((                //
//                    (((((((((                               (((((((((                   //
//                 ((((((((((((                               ((((((((((((                //
//              ((((((((((((((                                 ((((((((((((((             //
//            (((((((((((((                                       (((((((((((((           //
//            (((((((((((                                           (((((((((((           //
//             ((((((          (((((((                 (((((((         (((((((            //
//              ((      ((((((((((((((((((         ((((((((((((((((((      ((             //
//                (((((((((((((((((((((((((       (((((((((((((((((((((((((               //
//                 ((((((((((((((((((((((((      (((((((((((((((((((((((((                //
//                   (((((((((    ((((((((((     ((((((((((    (((((((((                  //
//                                 (((((((((    ((((((((((                                //
//                                 ((((((((((   ((((((((((                                //
//                                  (((((((((   (((((((((                                 //
//                                    (((((((   (((((((                                   //
//                                                                                        //
//                                                                                        //
//                                                                                        //
////////////////////////////////////////////////////////////////////////////////////////////
contract GENIE is ERC1155Creator {
    constructor() ERC1155Creator() {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC1155Creator is Proxy {
    constructor() {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4;
        Address.functionDelegateCall(
            0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4,
            abi.encodeWithSignature("initialize()")
        );
    }
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
     function implementation() public view returns (address) {
        return _implementation();
    }
    function _implementation() internal override view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }    
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts-upgradeable/token/ERC1155/ERC1155Upgradeable.sol";
import "@manifoldxyz/libraries-solidity/contracts/access/AdminControlUpgradeable.sol";
import "./core/ERC1155CreatorCore.sol";
/**
 * @dev ERC1155Creator implementation
 */
contract ERC1155CreatorImplementation is AdminControlUpgradeable, ERC1155Upgradeable, ERC1155CreatorCore {
    mapping(uint256 => uint256) private _totalSupply;
    /**
     * Initializer
     */
    function initialize() public initializer {
        __ERC1155_init("");
        __Ownable_init();
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC1155Upgradeable, ERC1155CreatorCore, AdminControlUpgradeable) returns (bool) {
        return ERC1155CreatorCore.supportsInterface(interfaceId) || ERC1155Upgradeable.supportsInterface(interfaceId) || AdminControlUpgradeable.supportsInterface(interfaceId);
    }
    function _beforeTokenTransfer(address, address from, address to, uint256[] memory ids, uint256[] memory amounts, bytes memory) internal virtual override {
        _approveTransfer(from, to, ids, amounts);
    }
    /**
     * @dev See {ICreatorCore-registerExtension}.
     */
    function registerExtension(address extension, string calldata baseURI) external override adminRequired nonBlacklistRequired(extension) {
        _registerExtension(extension, baseURI, false);
    }
    /**
     * @dev See {ICreatorCore-registerExtension}.
     */
    function registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) external override adminRequired nonBlacklistRequired(extension) {
        _registerExtension(extension, baseURI, baseURIIdentical);
    }
    /**
     * @dev See {ICreatorCore-unregisterExtension}.
     */
    function unregisterExtension(address extension) external override adminRequired {
        _unregisterExtension(extension);
    }
    /**
     * @dev See {ICreatorCore-blacklistExtension}.
     */
    function blacklistExtension(address extension) external override adminRequired {
        _blacklistExtension(extension);
    }
    /**
     * @dev See {ICreatorCore-setBaseTokenURIExtension}.
     */
    function setBaseTokenURIExtension(string calldata uri_) external override extensionRequired {
        _setBaseTokenURIExtension(uri_, false);
    }
    /**
     * @dev See {ICreatorCore-setBaseTokenURIExtension}.
     */
    function setBaseTokenURIExtension(string calldata uri_, bool identical) external override extensionRequired {
        _setBaseTokenURIExtension(uri_, identical);
    }
    /**
     * @dev See {ICreatorCore-setTokenURIPrefixExtension}.
     */
    function setTokenURIPrefixExtension(string calldata prefix) external override extensionRequired {
        _setTokenURIPrefixExtension(prefix);
    }
    /**
     * @dev See {ICreatorCore-setTokenURIExtension}.
     */
    function setTokenURIExtension(uint256 tokenId, string calldata uri_) external override extensionRequired {
        _setTokenURIExtension(tokenId, uri_);
    }
    /**
     * @dev See {ICreatorCore-setTokenURIExtension}.
     */
    function setTokenURIExtension(uint256[] memory tokenIds, string[] calldata uris) external override extensionRequired {
        require(tokenIds.length == uris.length, "Invalid input");
        for (uint i = 0; i < tokenIds.length; i++) {
            _setTokenURIExtension(tokenIds[i], uris[i]);            
        }
    }
    /**
     * @dev See {ICreatorCore-setBaseTokenURI}.
     */
    function setBaseTokenURI(string calldata uri_) external override adminRequired {
        _setBaseTokenURI(uri_);
    }
    /**
     * @dev See {ICreatorCore-setTokenURIPrefix}.
     */
    function setTokenURIPrefix(string calldata prefix) external override adminRequired {
        _setTokenURIPrefix(prefix);
    }
    /**
     * @dev See {ICreatorCore-setTokenURI}.
     */
    function setTokenURI(uint256 tokenId, string calldata uri_) external override adminRequired {
        _setTokenURI(tokenId, uri_);
    }
    /**
     * @dev See {ICreatorCore-setTokenURI}.
     */
    function setTokenURI(uint256[] memory tokenIds, string[] calldata uris) external override adminRequired {
        require(tokenIds.length == uris.length, "Invalid input");
        for (uint i = 0; i < tokenIds.length; i++) {
            _setTokenURI(tokenIds[i], uris[i]);            
        }
    }
    /**
     * @dev See {ICreatorCore-setMintPermissions}.
     */
    function setMintPermissions(address extension, address permissions) external override adminRequired {
        _setMintPermissions(extension, permissions);
    }
    /**
     * @dev See {IERC1155CreatorCore-mintBaseNew}.
     */
    function mintBaseNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) public virtual override nonReentrant adminRequired returns(uint256[] memory) {
        return _mintNew(address(this), to, amounts, uris);
    }
    /**
     * @dev See {IERC1155CreatorCore-mintBaseExisting}.
     */
    function mintBaseExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) public virtual override nonReentrant adminRequired {
        for (uint i = 0; i < tokenIds.length; i++) {
            require(_tokensExtension[tokenIds[i]] == address(this), "A token was created by an extension");
        }
        _mintExisting(address(this), to, tokenIds, amounts);
    }
    /**
     * @dev See {IERC1155CreatorCore-mintExtensionNew}.
     */
    function mintExtensionNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) public virtual override nonReentrant extensionRequired returns(uint256[] memory tokenIds) {
        return _mintNew(msg.sender, to, amounts, uris);
    }
    /**
     * @dev See {IERC1155CreatorCore-mintExtensionExisting}.
     */
    function mintExtensionExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) public virtual override nonReentrant extensionRequired {
        for (uint i = 0; i < tokenIds.length; i++) {
            require(_tokensExtension[tokenIds[i]] == address(msg.sender), "A token was not created by this extension");
        }
        _mintExisting(msg.sender, to, tokenIds, amounts);
    }
    /**
     * @dev Mint new tokens
     */
    function _mintNew(address extension, address[] memory to, uint256[] memory amounts, string[] memory uris) internal returns(uint256[] memory tokenIds) {
        if (to.length > 1) {
            // Multiple receiver.  Give every receiver the same new token
            tokenIds = new uint256[](1);
            require(uris.length <= 1 && (amounts.length == 1 || to.length == amounts.length), "Invalid input");
        } else {
            // Single receiver.  Generating multiple tokens
            tokenIds = new uint256[](amounts.length);
            require(uris.length == 0 || amounts.length == uris.length, "Invalid input");
        }
        // Assign tokenIds
        for (uint i = 0; i < tokenIds.length; i++) {
            _tokenCount++;
            tokenIds[i] = _tokenCount;
            // Track the extension that minted the token
            _tokensExtension[_tokenCount] = extension;
        }
        if (extension != address(this)) {
            _checkMintPermissions(to, tokenIds, amounts);
        }
        if (to.length == 1 && tokenIds.length == 1) {
           // Single mint
           _mint(to[0], tokenIds[0], amounts[0], new bytes(0));
        } else if (to.length > 1) {
            // Multiple receivers.  Receiving the same token
            if (amounts.length == 1) {
                // Everyone receiving the same amount
                for (uint i = 0; i < to.length; i++) {
                    _mint(to[i], tokenIds[0], amounts[0], new bytes(0));
                }
            } else {
                // Everyone receiving different amounts
                for (uint i = 0; i < to.length; i++) {
                    _mint(to[i], tokenIds[0], amounts[i], new bytes(0));
                }
            }
        } else {
            _mintBatch(to[0], tokenIds, amounts, new bytes(0));
        }
        for (uint i = 0; i < tokenIds.length; i++) {
            if (i < uris.length && bytes(uris[i]).length > 0) {
                _tokenURIs[tokenIds[i]] = uris[i];
            }
        }
        return tokenIds;
    }
    /**
     * @dev Mint existing tokens
     */
    function _mintExisting(address extension, address[] memory to, uint256[] memory tokenIds, uint256[] memory amounts) internal {
        if (extension != address(this)) {
            _checkMintPermissions(to, tokenIds, amounts);
        }
        if (to.length == 1 && tokenIds.length == 1 && amounts.length == 1) {
             // Single mint
            _mint(to[0], tokenIds[0], amounts[0], new bytes(0));            
        } else if (to.length == 1 && tokenIds.length == amounts.length) {
            // Batch mint to same receiver
            _mintBatch(to[0], tokenIds, amounts, new bytes(0));
        } else if (tokenIds.length == 1 && amounts.length == 1) {
            // Mint of the same token/token amounts to various receivers
            for (uint i = 0; i < to.length; i++) {
                _mint(to[i], tokenIds[0], amounts[0], new bytes(0));
            }
        } else if (tokenIds.length == 1 && to.length == amounts.length) {
            // Mint of the same token with different amounts to different receivers
            for (uint i = 0; i < to.length; i++) {
                _mint(to[i], tokenIds[0], amounts[i], new bytes(0));
            }
        } else if (to.length == tokenIds.length && to.length == amounts.length) {
            // Mint of different tokens and different amounts to different receivers
            for (uint i = 0; i < to.length; i++) {
                _mint(to[i], tokenIds[i], amounts[i], new bytes(0));
            }
        } else {
            revert("Invalid input");
        }
    }
    /**
     * @dev See {IERC1155CreatorCore-tokenExtension}.
     */
    function tokenExtension(uint256 tokenId) public view virtual override returns (address) {
        return _tokenExtension(tokenId);
    }
    /**
     * @dev See {IERC1155CreatorCore-burn}.
     */
    function burn(address account, uint256[] memory tokenIds, uint256[] memory amounts) public virtual override nonReentrant {
        require(account == msg.sender || isApprovedForAll(account, msg.sender), "Caller is not owner nor approved");
        require(tokenIds.length == amounts.length, "Invalid input");
        if (tokenIds.length == 1) {
            _burn(account, tokenIds[0], amounts[0]);
        } else {
            _burnBatch(account, tokenIds, amounts);
        }
        _postBurn(account, tokenIds, amounts);
    }
    /**
     * @dev See {ICreatorCore-setRoyalties}.
     */
    function setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) external override adminRequired {
        _setRoyaltiesExtension(address(this), receivers, basisPoints);
    }
    /**
     * @dev See {ICreatorCore-setRoyalties}.
     */
    function setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) external override adminRequired {
        _setRoyalties(tokenId, receivers, basisPoints);
    }
    /**
     * @dev See {ICreatorCore-setRoyaltiesExtension}.
     */
    function setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) external override adminRequired {
        _setRoyaltiesExtension(extension, receivers, basisPoints);
    }
    /**
     * @dev {See ICreatorCore-getRoyalties}.
     */
    function getRoyalties(uint256 tokenId) external view virtual override returns (address payable[] memory, uint256[] memory) {
        return _getRoyalties(tokenId);
    }
    /**
     * @dev {See ICreatorCore-getFees}.
     */
    function getFees(uint256 tokenId) external view virtual override returns (address payable[] memory, uint256[] memory) {
        return _getRoyalties(tokenId);
    }
    /**
     * @dev {See ICreatorCore-getFeeRecipients}.
     */
    function getFeeRecipients(uint256 tokenId) external view virtual override returns (address payable[] memory) {
        return _getRoyaltyReceivers(tokenId);
    }
    /**
     * @dev {See ICreatorCore-getFeeBps}.
     */
    function getFeeBps(uint256 tokenId) external view virtual override returns (uint[] memory) {
        return _getRoyaltyBPS(tokenId);
    }
    
    /**
     * @dev {See ICreatorCore-royaltyInfo}.
     */
    function royaltyInfo(uint256 tokenId, uint256 value) external view virtual override returns (address, uint256) {
        return _getRoyaltyInfo(tokenId, value);
    } 
    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function uri(uint256 tokenId) public view virtual override returns (string memory) {
        return _tokenURI(tokenId);
    }
    
    /**
     * @dev Total amount of tokens in with a given id.
     */
    function totalSupply(uint256 tokenId) external view virtual override returns (uint256) {
        return _totalSupply[tokenId];
    }
    /**
     * @dev See {ERC1155-_mint}.
     */
    function _mint(address account, uint256 id, uint256 amount, bytes memory data) internal virtual override {
        super._mint(account, id, amount, data);
        _totalSupply[id] += amount;
    }
    /**
     * @dev See {ERC1155-_mintBatch}.
     */
    function _mintBatch(address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data) internal virtual override {
        super._mintBatch(to, ids, amounts, data);
        for (uint256 i = 0; i < ids.length; ++i) {
            _totalSupply[ids[i]] += amounts[i];
        }
    }
    /**
     * @dev See {ERC1155-_burn}.
     */
    function _burn(address account, uint256 id, uint256 amount) internal virtual override {
        super._burn(account, id, amount);
        _totalSupply[id] -= amount;
    }
    /**
     * @dev See {ERC1155-_burnBatch}.
     */
    function _burnBatch(address account, uint256[] memory ids, uint256[] memory amounts) internal virtual override {
        super._burnBatch(account, ids, amounts);
        for (uint256 i = 0; i < ids.length; ++i) {
            _totalSupply[ids[i]] -= amounts[i];
        }
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC1155Upgradeable.sol";
import "./IERC1155ReceiverUpgradeable.sol";
import "./extensions/IERC1155MetadataURIUpgradeable.sol";
import "../../utils/AddressUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../utils/introspection/ERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC1155Upgradeable, IERC1155MetadataURIUpgradeable {
    using AddressUpgradeable for address;
    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;
    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;
    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;
    /**
     * @dev See {_setURI}.
     */
    function __ERC1155_init(string memory uri_) internal initializer {
        __Context_init_unchained();
        __ERC165_init_unchained();
        __ERC1155_init_unchained(uri_);
    }
    function __ERC1155_init_unchained(string memory uri_) internal initializer {
        _setURI(uri_);
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
        return
            interfaceId == type(IERC1155Upgradeable).interfaceId ||
            interfaceId == type(IERC1155MetadataURIUpgradeable).interfaceId ||
            super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\\{id\\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }
    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: balance query for the zero address");
        return _balances[id][account];
    }
    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
        uint256[] memory batchBalances = new uint256[](accounts.length);
        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }
        return batchBalances;
    }
    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(_msgSender() != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }
    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }
    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }
    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: transfer caller is not owner nor approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }
    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;
        emit TransferSingle(operator, from, to, id, amount);
        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, from, to, ids, amounts, data);
        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];
            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }
        emit TransferBatch(operator, from, to, ids, amounts);
        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }
    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\\{id\\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\\{id\\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }
    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - If `account` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address account,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(account != address(0), "ERC1155: mint to the zero address");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, address(0), account, _asSingletonArray(id), _asSingletonArray(amount), data);
        _balances[id][account] += amount;
        emit TransferSingle(operator, address(0), account, id, amount);
        _doSafeTransferAcceptanceCheck(operator, address(0), account, id, amount, data);
    }
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }
        emit TransferBatch(operator, address(0), to, ids, amounts);
        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }
    /**
     * @dev Destroys `amount` tokens of token type `id` from `account`
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address account,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(account != address(0), "ERC1155: burn from the zero address");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, account, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
        uint256 accountBalance = _balances[id][account];
        require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][account] = accountBalance - amount;
        }
        emit TransferSingle(operator, account, address(0), id, amount);
    }
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address account,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(account != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];
            uint256 accountBalance = _balances[id][account];
            require(accountBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][account] = accountBalance - amount;
            }
        }
        emit TransferBatch(operator, account, address(0), ids, amounts);
    }
    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}
    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155ReceiverUpgradeable(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155ReceiverUpgradeable(to).onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }
    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }
    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;
        return array;
    }
    uint256[47] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "./IAdminControl.sol";
abstract contract AdminControlUpgradeable is OwnableUpgradeable, IAdminControl, ERC165 {
    using EnumerableSet for EnumerableSet.AddressSet;
    // Track registered admins
    EnumerableSet.AddressSet private _admins;
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IAdminControl).interfaceId
            || super.supportsInterface(interfaceId);
    }
    /**
     * @dev Only allows approved admins to call the specified function
     */
    modifier adminRequired() {
        require(owner() == msg.sender || _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
        _;
    }   
    /**
     * @dev See {IAdminControl-getAdmins}.
     */
    function getAdmins() external view override returns (address[] memory admins) {
        admins = new address[](_admins.length());
        for (uint i = 0; i < _admins.length(); i++) {
            admins[i] = _admins.at(i);
        }
        return admins;
    }
    /**
     * @dev See {IAdminControl-approveAdmin}.
     */
    function approveAdmin(address admin) external override onlyOwner {
        if (!_admins.contains(admin)) {
            emit AdminApproved(admin, msg.sender);
            _admins.add(admin);
        }
    }
    /**
     * @dev See {IAdminControl-revokeAdmin}.
     */
    function revokeAdmin(address admin) external override onlyOwner {
        if (_admins.contains(admin)) {
            emit AdminRevoked(admin, msg.sender);
            _admins.remove(admin);
        }
    }
    /**
     * @dev See {IAdminControl-isAdmin}.
     */
    function isAdmin(address admin) public override view returns (bool) {
        return (owner() == admin || _admins.contains(admin));
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "../extensions/ERC1155/IERC1155CreatorExtensionApproveTransfer.sol";
import "../extensions/ERC1155/IERC1155CreatorExtensionBurnable.sol";
import "../permissions/ERC1155/IERC1155CreatorMintPermissions.sol";
import "./IERC1155CreatorCore.sol";
import "./CreatorCore.sol";
/**
 * @dev Core ERC1155 creator implementation
 */
abstract contract ERC1155CreatorCore is CreatorCore, IERC1155CreatorCore {
    using EnumerableSet for EnumerableSet.AddressSet;
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(CreatorCore, IERC165) returns (bool) {
        return interfaceId == type(IERC1155CreatorCore).interfaceId || super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {ICreatorCore-setApproveTransferExtension}.
     */
    function setApproveTransferExtension(bool enabled) external override extensionRequired {
        require(!enabled || ERC165Checker.supportsInterface(msg.sender, type(IERC1155CreatorExtensionApproveTransfer).interfaceId), "Extension must implement IERC1155CreatorExtensionApproveTransfer");
        if (_extensionApproveTransfers[msg.sender] != enabled) {
            _extensionApproveTransfers[msg.sender] = enabled;
            emit ExtensionApproveTransferUpdated(msg.sender, enabled);
        }
    }
    /**
     * @dev Set mint permissions for an extension
     */
    function _setMintPermissions(address extension, address permissions) internal {
        require(_extensions.contains(extension), "Invalid extension");
        require(permissions == address(0x0) || ERC165Checker.supportsInterface(permissions, type(IERC1155CreatorMintPermissions).interfaceId), "Invalid address");
        if (_extensionPermissions[extension] != permissions) {
            _extensionPermissions[extension] = permissions;
            emit MintPermissionsUpdated(extension, permissions, msg.sender);
        }
    }
    /**
     * Check if an extension can mint
     */
    function _checkMintPermissions(address[] memory to, uint256[] memory tokenIds, uint256[] memory amounts) internal {
        if (_extensionPermissions[msg.sender] != address(0x0)) {
            IERC1155CreatorMintPermissions(_extensionPermissions[msg.sender]).approveMint(msg.sender, to, tokenIds, amounts);
        }
    }
    /**
     * Post burn actions
     */
    function _postBurn(address owner, uint256[] memory tokenIds, uint256[] memory amounts) internal virtual {
        require(tokenIds.length > 0, "Invalid input");
        address extension = _tokensExtension[tokenIds[0]];
        for (uint i = 0; i < tokenIds.length; i++) {
            require(_tokensExtension[tokenIds[i]] == extension, "Mismatched token originators");
        }
        // Callback to originating extension if needed
        if (extension != address(this)) {
           if (ERC165Checker.supportsInterface(extension, type(IERC1155CreatorExtensionBurnable).interfaceId)) {
               IERC1155CreatorExtensionBurnable(extension).onBurn(owner, tokenIds, amounts);
           }
        }
    }
    /**
     * Approve a transfer
     */
    function _approveTransfer(address from, address to, uint256[] memory tokenIds, uint256[] memory amounts) internal {
        require(tokenIds.length > 0, "Invalid input");
        address extension = _tokensExtension[tokenIds[0]];
        for (uint i = 0; i < tokenIds.length; i++) {
            require(_tokensExtension[tokenIds[i]] == extension, "Mismatched token originators");
        }
        if (_extensionApproveTransfers[extension]) {
            require(IERC1155CreatorExtensionApproveTransfer(extension).approveTransfer(from, to, tokenIds, amounts), "Extension approval failure");
        }
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );
    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);
    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);
    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);
    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;
    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);
    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155ReceiverUpgradeable is IERC165Upgradeable {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC1155Upgradeable.sol";
/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURIUpgradeable is IERC1155Upgradeable {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\\{id\\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }
    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal initializer {
        __ERC165_init_unchained();
    }
    function __ERC165_init_unchained() internal initializer {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || !_initialized, "Initializable: contract is already initialized");
        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.
    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];
        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.
            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;
            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];
                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }
            // Delete the slot where the moved value was stored
            set._values.pop();
            // Delete the index for the deleted slot
            delete set._indexes[value];
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }
    // Bytes32Set
    struct Bytes32Set {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }
    // AddressSet
    struct AddressSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }
    // UintSet
    struct UintSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }
    function __Ownable_init_unchained() internal initializer {
        _setOwner(_msgSender());
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }
    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Interface for admin control
 */
interface IAdminControl is IERC165 {
    event AdminApproved(address indexed account, address indexed sender);
    event AdminRevoked(address indexed account, address indexed sender);
    /**
     * @dev gets address of all admins
     */
    function getAdmins() external view returns (address[] memory);
    /**
     * @dev add an admin.  Can only be called by contract owner.
     */
    function approveAdmin(address admin) external;
    /**
     * @dev remove an admin.  Can only be called by contract owner.
     */
    function revokeAdmin(address admin) external;
    /**
     * @dev checks whether or not given address is an admin
     * Returns True if they are
     */
    function isAdmin(address admin) external view returns (bool);
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * Implement this if you want your extension to approve a transfer
 */
interface IERC1155CreatorExtensionApproveTransfer is IERC165 {
    /**
     * @dev Set whether or not the creator contract will check the extension for approval of token transfer
     */
    function setApproveTransfer(address creator, bool enabled) external;
    /**
     * @dev Called by creator contract to approve a transfer
     */
    function approveTransfer(address from, address to, uint256[] calldata tokenIds, uint256[] calldata amounts) external returns (bool);
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Your extension is required to implement this interface if it wishes
 * to receive the onBurn callback whenever a token the extension created is
 * burned
 */
interface IERC1155CreatorExtensionBurnable is IERC165 {
    /**
     * @dev callback handler for burn events
     */
    function onBurn(address owner, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC1155Creator compliant extension contracts.
 */
interface IERC1155CreatorMintPermissions is IERC165 {
    /**
     * @dev get approval to mint
     */
    function approveMint(address extension, address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "./CreatorCore.sol";
/**
 * @dev Core ERC1155 creator interface
 */
interface IERC1155CreatorCore is ICreatorCore {
    /**
     * @dev mint a token with no extension. Can only be called by an admin.
     *
     * @param to       - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param amounts  - Can be a single element array (all recipients get the same amount) or a multi-element array
     * @param uris     - If no elements, all tokens use the default uri.
     *                   If any element is an empty string, the corresponding token uses the default uri.
     *
     *
     * Requirements: If to is a multi-element array, then uris must be empty or single element array
     *               If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
     *               If to is a single element array, uris must be empty or the same length as amounts
     *
     * Examples:
     *    mintBaseNew(['0x....1', '0x....2'], [1], [])
     *        Mints a single new token, and gives 1 each to '0x....1' and '0x....2'.  Token uses default uri.
     *    
     *    mintBaseNew(['0x....1', '0x....2'], [1, 2], [])
     *        Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'.  Token uses default uri.
     *    
     *    mintBaseNew(['0x....1'], [1, 2], ["", "http://token2.com"])
     *        Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second.  1st token uses default uri, second uses "http://token2.com".
     *    
     * @return Returns list of tokenIds minted
     */
    function mintBaseNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);
    /**
     * @dev batch mint existing token with no extension. Can only be called by an admin.
     *
     * @param to        - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param tokenIds  - Can be a single element array (all recipients get the same token) or a multi-element array
     * @param amounts   - Can be a single element array (all recipients get the same amount) or a multi-element array
     *
     * Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
     *
     * Examples:
     *    mintBaseExisting(['0x....1', '0x....2'], [1], [10])
     *        Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
     *    
     *    mintBaseExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
     *    
     *    mintBaseExisting(['0x....1'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
     *    
     *    mintBaseExisting(['0x....1', '0x....2'], [1], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
     *    
     */
    function mintBaseExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
    /**
     * @dev mint a token from an extension. Can only be called by a registered extension.
     *
     * @param to       - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param amounts  - Can be a single element array (all recipients get the same amount) or a multi-element array
     * @param uris     - If no elements, all tokens use the default uri.
     *                   If any element is an empty string, the corresponding token uses the default uri.
     *
     *
     * Requirements: If to is a multi-element array, then uris must be empty or single element array
     *               If to is a multi-element array, then amounts must be a single element array or a multi-element array of the same size
     *               If to is a single element array, uris must be empty or the same length as amounts
     *
     * Examples:
     *    mintExtensionNew(['0x....1', '0x....2'], [1], [])
     *        Mints a single new token, and gives 1 each to '0x....1' and '0x....2'.  Token uses default uri.
     *    
     *    mintExtensionNew(['0x....1', '0x....2'], [1, 2], [])
     *        Mints a single new token, and gives 1 to '0x....1' and 2 to '0x....2'.  Token uses default uri.
     *    
     *    mintExtensionNew(['0x....1'], [1, 2], ["", "http://token2.com"])
     *        Mints two new tokens to '0x....1'. 1 of the first token, 2 of the second.  1st token uses default uri, second uses "http://token2.com".
     *    
     * @return Returns list of tokenIds minted
     */
    function mintExtensionNew(address[] calldata to, uint256[] calldata amounts, string[] calldata uris) external returns (uint256[] memory);
    /**
     * @dev batch mint existing token from extension. Can only be called by a registered extension.
     *
     * @param to        - Can be a single element array (all tokens go to same address) or multi-element array (single token to many recipients)
     * @param tokenIds  - Can be a single element array (all recipients get the same token) or a multi-element array
     * @param amounts   - Can be a single element array (all recipients get the same amount) or a multi-element array
     *
     * Requirements: If any of the parameters are multi-element arrays, they need to be the same length as other multi-element arrays
     *
     * Examples:
     *    mintExtensionExisting(['0x....1', '0x....2'], [1], [10])
     *        Mints 10 of tokenId 1 to each of '0x....1' and '0x....2'.
     *    
     *    mintExtensionExisting(['0x....1', '0x....2'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 2 to '0x....2'.
     *    
     *    mintExtensionExisting(['0x....1'], [1, 2], [10, 20])
     *        Mints 10 of tokenId 1 and 20 of tokenId 2 to '0x....1'.
     *    
     *    mintExtensionExisting(['0x....1', '0x....2'], [1], [10, 20])
     *        Mints 10 of tokenId 1 to '0x....1' and 20 of tokenId 1 to '0x....2'.
     *    
     */
    function mintExtensionExisting(address[] calldata to, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
    /**
     * @dev burn tokens. Can only be called by token owner or approved address.
     * On burn, calls back to the registered extension's onBurn method
     */
    function burn(address account, uint256[] calldata tokenIds, uint256[] calldata amounts) external;
    /**
     * @dev Total amount of tokens in with a given tokenId.
     */
    function totalSupply(uint256 tokenId) external view returns (uint256);
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import "../extensions/ICreatorExtensionTokenURI.sol";
import "./ICreatorCore.sol";
/**
 * @dev Core creator implementation
 */
abstract contract CreatorCore is ReentrancyGuard, ICreatorCore, ERC165 {
    using Strings for uint256;
    using EnumerableSet for EnumerableSet.AddressSet;
    using AddressUpgradeable for address;
    uint256 _tokenCount = 0;
    // Track registered extensions data
    EnumerableSet.AddressSet internal _extensions;
    EnumerableSet.AddressSet internal _blacklistedExtensions;
    mapping (address => address) internal _extensionPermissions;
    mapping (address => bool) internal _extensionApproveTransfers;
    
    // For tracking which extension a token was minted by
    mapping (uint256 => address) internal _tokensExtension;
    // The baseURI for a given extension
    mapping (address => string) private _extensionBaseURI;
    mapping (address => bool) private _extensionBaseURIIdentical;
    // The prefix for any tokens with a uri configured
    mapping (address => string) private _extensionURIPrefix;
    // Mapping for individual token URIs
    mapping (uint256 => string) internal _tokenURIs;
    
    // Royalty configurations
    mapping (address => address payable[]) internal _extensionRoyaltyReceivers;
    mapping (address => uint256[]) internal _extensionRoyaltyBPS;
    mapping (uint256 => address payable[]) internal _tokenRoyaltyReceivers;
    mapping (uint256 => uint256[]) internal _tokenRoyaltyBPS;
    /**
     * External interface identifiers for royalties
     */
    /**
     *  @dev CreatorCore
     *
     *  bytes4(keccak256('getRoyalties(uint256)')) == 0xbb3bafd6
     *
     *  => 0xbb3bafd6 = 0xbb3bafd6
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_CREATORCORE = 0xbb3bafd6;
    /**
     *  @dev Rarible: RoyaltiesV1
     *
     *  bytes4(keccak256('getFeeRecipients(uint256)')) == 0xb9c4d9fb
     *  bytes4(keccak256('getFeeBps(uint256)')) == 0x0ebd4c7f
     *
     *  => 0xb9c4d9fb ^ 0x0ebd4c7f = 0xb7799584
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_RARIBLE = 0xb7799584;
    /**
     *  @dev Foundation
     *
     *  bytes4(keccak256('getFees(uint256)')) == 0xd5a06d4c
     *
     *  => 0xd5a06d4c = 0xd5a06d4c
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_FOUNDATION = 0xd5a06d4c;
    /**
     *  @dev EIP-2981
     *
     * bytes4(keccak256("royaltyInfo(uint256,uint256)")) == 0x2a55205a
     *
     * => 0x2a55205a = 0x2a55205a
     */
    bytes4 private constant _INTERFACE_ID_ROYALTIES_EIP2981 = 0x2a55205a;
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(ICreatorCore).interfaceId || super.supportsInterface(interfaceId)
            || interfaceId == _INTERFACE_ID_ROYALTIES_CREATORCORE || interfaceId == _INTERFACE_ID_ROYALTIES_RARIBLE
            || interfaceId == _INTERFACE_ID_ROYALTIES_FOUNDATION || interfaceId == _INTERFACE_ID_ROYALTIES_EIP2981;
    }
    /**
     * @dev Only allows registered extensions to call the specified function
     */
    modifier extensionRequired() {
        require(_extensions.contains(msg.sender), "Must be registered extension");
        _;
    }
    /**
     * @dev Only allows non-blacklisted extensions
     */
    modifier nonBlacklistRequired(address extension) {
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
        _;
    }   
    /**
     * @dev See {ICreatorCore-getExtensions}.
     */
    function getExtensions() external view override returns (address[] memory extensions) {
        extensions = new address[](_extensions.length());
        for (uint i = 0; i < _extensions.length(); i++) {
            extensions[i] = _extensions.at(i);
        }
        return extensions;
    }
    /**
     * @dev Register an extension
     */
    function _registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) internal {
        require(extension != address(this), "Creator: Invalid");
        require(extension.isContract(), "Creator: Extension must be a contract");
        if (!_extensions.contains(extension)) {
            _extensionBaseURI[extension] = baseURI;
            _extensionBaseURIIdentical[extension] = baseURIIdentical;
            emit ExtensionRegistered(extension, msg.sender);
            _extensions.add(extension);
        }
    }
    /**
     * @dev Unregister an extension
     */
    function _unregisterExtension(address extension) internal {
       if (_extensions.contains(extension)) {
           emit ExtensionUnregistered(extension, msg.sender);
           _extensions.remove(extension);
       }
    }
    /**
     * @dev Blacklist an extension
     */
    function _blacklistExtension(address extension) internal {
       require(extension != address(this), "Cannot blacklist yourself");
       if (_extensions.contains(extension)) {
           emit ExtensionUnregistered(extension, msg.sender);
           _extensions.remove(extension);
       }
       if (!_blacklistedExtensions.contains(extension)) {
           emit ExtensionBlacklisted(extension, msg.sender);
           _blacklistedExtensions.add(extension);
       }
    }
    /**
     * @dev Set base token uri for an extension
     */
    function _setBaseTokenURIExtension(string calldata uri, bool identical) internal {
        _extensionBaseURI[msg.sender] = uri;
        _extensionBaseURIIdentical[msg.sender] = identical;
    }
    /**
     * @dev Set token uri prefix for an extension
     */
    function _setTokenURIPrefixExtension(string calldata prefix) internal {
        _extensionURIPrefix[msg.sender] = prefix;
    }
    /**
     * @dev Set token uri for a token of an extension
     */
    function _setTokenURIExtension(uint256 tokenId, string calldata uri) internal {
        require(_tokensExtension[tokenId] == msg.sender, "Invalid token");
        _tokenURIs[tokenId] = uri;
    }
    /**
     * @dev Set base token uri for tokens with no extension
     */
    function _setBaseTokenURI(string memory uri) internal {
        _extensionBaseURI[address(this)] = uri;
    }
    /**
     * @dev Set token uri prefix for tokens with no extension
     */
    function _setTokenURIPrefix(string calldata prefix) internal {
        _extensionURIPrefix[address(this)] = prefix;
    }
    /**
     * @dev Set token uri for a token with no extension
     */
    function _setTokenURI(uint256 tokenId, string calldata uri) internal {
        require(_tokensExtension[tokenId] == address(this), "Invalid token");
        _tokenURIs[tokenId] = uri;
    }
    /**
     * @dev Retrieve a token's URI
     */
    function _tokenURI(uint256 tokenId) internal view returns (string memory) {
        address extension = _tokensExtension[tokenId];
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
        if (bytes(_tokenURIs[tokenId]).length != 0) {
            if (bytes(_extensionURIPrefix[extension]).length != 0) {
                return string(abi.encodePacked(_extensionURIPrefix[extension],_tokenURIs[tokenId]));
            }
            return _tokenURIs[tokenId];
        }
        if (ERC165Checker.supportsInterface(extension, type(ICreatorExtensionTokenURI).interfaceId)) {
            return ICreatorExtensionTokenURI(extension).tokenURI(address(this), tokenId);
        }
        if (!_extensionBaseURIIdentical[extension]) {
            return string(abi.encodePacked(_extensionBaseURI[extension], tokenId.toString()));
        } else {
            return _extensionBaseURI[extension];
        }
    }
    /**
     * Get token extension
     */
    function _tokenExtension(uint256 tokenId) internal view returns (address extension) {
        extension = _tokensExtension[tokenId];
        require(extension != address(this), "No extension for token");
        require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
        return extension;
    }
    /**
     * Helper to get royalties for a token
     */
    function _getRoyalties(uint256 tokenId) view internal returns (address payable[] storage, uint256[] storage) {
        return (_getRoyaltyReceivers(tokenId), _getRoyaltyBPS(tokenId));
    }
    /**
     * Helper to get royalty receivers for a token
     */
    function _getRoyaltyReceivers(uint256 tokenId) view internal returns (address payable[] storage) {
        if (_tokenRoyaltyReceivers[tokenId].length > 0) {
            return _tokenRoyaltyReceivers[tokenId];
        } else if (_extensionRoyaltyReceivers[_tokensExtension[tokenId]].length > 0) {
            return _extensionRoyaltyReceivers[_tokensExtension[tokenId]];
        }
        return _extensionRoyaltyReceivers[address(this)];        
    }
    /**
     * Helper to get royalty basis points for a token
     */
    function _getRoyaltyBPS(uint256 tokenId) view internal returns (uint256[] storage) {
        if (_tokenRoyaltyBPS[tokenId].length > 0) {
            return _tokenRoyaltyBPS[tokenId];
        } else if (_extensionRoyaltyBPS[_tokensExtension[tokenId]].length > 0) {
            return _extensionRoyaltyBPS[_tokensExtension[tokenId]];
        }
        return _extensionRoyaltyBPS[address(this)];        
    }
    function _getRoyaltyInfo(uint256 tokenId, uint256 value) view internal returns (address receiver, uint256 amount){
        address payable[] storage receivers = _getRoyaltyReceivers(tokenId);
        require(receivers.length <= 1, "More than 1 royalty receiver");
        
        if (receivers.length == 0) {
            return (address(this), 0);
        }
        return (receivers[0], _getRoyaltyBPS(tokenId)[0]*value/10000);
    }
    /**
     * Set royalties for a token
     */
    function _setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
        require(receivers.length == basisPoints.length, "Invalid input");
        uint256 totalBasisPoints;
        for (uint i = 0; i < basisPoints.length; i++) {
            totalBasisPoints += basisPoints[i];
        }
        require(totalBasisPoints < 10000, "Invalid total royalties");
        _tokenRoyaltyReceivers[tokenId] = receivers;
        _tokenRoyaltyBPS[tokenId] = basisPoints;
        emit RoyaltiesUpdated(tokenId, receivers, basisPoints);
    }
    /**
     * Set royalties for all tokens of an extension
     */
    function _setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) internal {
        require(receivers.length == basisPoints.length, "Invalid input");
        uint256 totalBasisPoints;
        for (uint i = 0; i < basisPoints.length; i++) {
            totalBasisPoints += basisPoints[i];
        }
        require(totalBasisPoints < 10000, "Invalid total royalties");
        _extensionRoyaltyReceivers[extension] = receivers;
        _extensionRoyaltyBPS[extension] = basisPoints;
        if (extension == address(this)) {
            emit DefaultRoyaltiesUpdated(receivers, basisPoints);
        } else {
            emit ExtensionRoyaltiesUpdated(extension, receivers, basisPoints);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor() {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
    /**
     * @dev Returns true if `account` supports the {IERC165} interface,
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            _supportsERC165Interface(account, type(IERC165).interfaceId) &&
            !_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
    }
    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
    }
    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
        internal
        view
        returns (bool[] memory)
    {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);
        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
            }
        }
        return interfaceIdsSupported;
    }
    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }
        // query support of each interface in _interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!_supportsERC165Interface(account, interfaceIds[i])) {
                return false;
            }
        }
        // all interfaces supported
        return true;
    }
    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     * Interface identification is specified in ERC-165.
     */
    function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
        bytes memory encodedParams = abi.encodeWithSelector(IERC165(account).supportsInterface.selector, interfaceId);
        (bool success, bytes memory result) = account.staticcall{gas: 30000}(encodedParams);
        if (result.length < 32) return false;
        return success && abi.decode(result, (bool));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Implement this if you want your extension to have overloadable URI's
 */
interface ICreatorExtensionTokenURI is IERC165 {
    /**
     * Get the uri for a given creator/tokenId
     */
    function tokenURI(address creator, uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Core creator interface
 */
interface ICreatorCore is IERC165 {
    event ExtensionRegistered(address indexed extension, address indexed sender);
    event ExtensionUnregistered(address indexed extension, address indexed sender);
    event ExtensionBlacklisted(address indexed extension, address indexed sender);
    event MintPermissionsUpdated(address indexed extension, address indexed permissions, address indexed sender);
    event RoyaltiesUpdated(uint256 indexed tokenId, address payable[] receivers, uint256[] basisPoints);
    event DefaultRoyaltiesUpdated(address payable[] receivers, uint256[] basisPoints);
    event ExtensionRoyaltiesUpdated(address indexed extension, address payable[] receivers, uint256[] basisPoints);
    event ExtensionApproveTransferUpdated(address indexed extension, bool enabled);
    /**
     * @dev gets address of all extensions
     */
    function getExtensions() external view returns (address[] memory);
    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * extension address must point to a contract implementing ICreatorExtension.
     * Returns True if newly added, False if already added.
     */
    function registerExtension(address extension, string calldata baseURI) external;
    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * extension address must point to a contract implementing ICreatorExtension.
     * Returns True if newly added, False if already added.
     */
    function registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) external;
    /**
     * @dev add an extension.  Can only be called by contract owner or admin.
     * Returns True if removed, False if already removed.
     */
    function unregisterExtension(address extension) external;
    /**
     * @dev blacklist an extension.  Can only be called by contract owner or admin.
     * This function will destroy all ability to reference the metadata of any tokens created
     * by the specified extension. It will also unregister the extension if needed.
     * Returns True if removed, False if already removed.
     */
    function blacklistExtension(address extension) external;
    /**
     * @dev set the baseTokenURI of an extension.  Can only be called by extension.
     */
    function setBaseTokenURIExtension(string calldata uri) external;
    /**
     * @dev set the baseTokenURI of an extension.  Can only be called by extension.
     * For tokens with no uri configured, tokenURI will return "uri+tokenId"
     */
    function setBaseTokenURIExtension(string calldata uri, bool identical) external;
    /**
     * @dev set the common prefix of an extension.  Can only be called by extension.
     * If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
     * Useful if you want to use ipfs/arweave
     */
    function setTokenURIPrefixExtension(string calldata prefix) external;
    /**
     * @dev set the tokenURI of a token extension.  Can only be called by extension that minted token.
     */
    function setTokenURIExtension(uint256 tokenId, string calldata uri) external;
    /**
     * @dev set the tokenURI of a token extension for multiple tokens.  Can only be called by extension that minted token.
     */
    function setTokenURIExtension(uint256[] memory tokenId, string[] calldata uri) external;
    /**
     * @dev set the baseTokenURI for tokens with no extension.  Can only be called by owner/admin.
     * For tokens with no uri configured, tokenURI will return "uri+tokenId"
     */
    function setBaseTokenURI(string calldata uri) external;
    /**
     * @dev set the common prefix for tokens with no extension.  Can only be called by owner/admin.
     * If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
     * Useful if you want to use ipfs/arweave
     */
    function setTokenURIPrefix(string calldata prefix) external;
    /**
     * @dev set the tokenURI of a token with no extension.  Can only be called by owner/admin.
     */
    function setTokenURI(uint256 tokenId, string calldata uri) external;
    /**
     * @dev set the tokenURI of multiple tokens with no extension.  Can only be called by owner/admin.
     */
    function setTokenURI(uint256[] memory tokenIds, string[] calldata uris) external;
    /**
     * @dev set a permissions contract for an extension.  Used to control minting.
     */
    function setMintPermissions(address extension, address permissions) external;
    /**
     * @dev Configure so transfers of tokens created by the caller (must be extension) gets approval
     * from the extension before transferring
     */
    function setApproveTransferExtension(bool enabled) external;
    /**
     * @dev get the extension of a given token
     */
    function tokenExtension(uint256 tokenId) external view returns (address);
    /**
     * @dev Set default royalties
     */
    function setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) external;
    /**
     * @dev Set royalties of a token
     */
    function setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) external;
    /**
     * @dev Set royalties of an extension
     */
    function setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) external;
    /**
     * @dev Get royalites of a token.  Returns list of receivers and basisPoints
     */
    function getRoyalties(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
    
    // Royalty support for various other standards
    function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory);
    function getFeeBps(uint256 tokenId) external view returns (uint[] memory);
    function getFees(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
    function royaltyInfo(uint256 tokenId, uint256 value) external view returns (address, uint256);
}