/*
                                                           ,▄▓▓██▌   ,╓▄▄▓▓▓▓▓▓▓▓▄▄▄,,
                                                        ,▓██▓███▓▄▓███▓╬╬╬╬╬╬╬╬╬╬╬╬╬▓███▓▄,
                                                  ▄█   ▓██╬╣███████╬▓▀╬╬▓▓▓████████████▓█████▄,
                                                 ▓██▌ ▓██╬╣██████╬▓▌  ██████████████████████▌╙╙▀ⁿ
                                                ▐████████╬▓████▓▓█╨ ▄ ╟█████████▓▓╬╬╬╬╬▓▓█████▓▄
                                  └▀▓▓▄╓        ╟█▓╣█████▓██████▀ ╓█▌ ███████▓▓▓▓▓╬╬╬╬╬╬╬╬╬╬╬╬▓██▓▄
                                     └▀████▓▄╥  ▐██╬╬██████████╙ Æ▀─ ▓███▀╚╠╬╩▀▀███████▓▓╬╬╬╬╬╬╬╬╬██▄
                                        └▀██▓▀▀█████▓╬▓██████▀     ▄█████▒╠"      └╙▓██████▓╬╬╬╬╬╬╬╬██▄
                                           └▀██▄,└╙▀▀████▌└╙    ^"▀╙╙╙"╙██      @▄    ╙▀███████╬╬╬╬╬╬╬██µ
                                              └▀██▓▄, ██▌       ╒       ╙█▓     ]▓█▓╔    ▀███████▓╬╬╬╬╬▓█▌
                                                  ▀█████       ▓         ╟█▌    ]╠██▓░▒╓   ▀████████╬╬╬╬╣█▌
                                                  ▐████      ╓█▀█▌      ,██▌    ╚Å███▓▒▒╠╓  ╙█████████╬╬╬╣█▌
                                                  └████     ▓█░░▓█      ▀▀▀    φ▒╫████▒▒▒▒╠╓  █████████▓╬╬▓█µ
                                                   ╘███µ ▌▄█▓▄▓▀`     ,▀    ,╔╠░▓██████▌╠▒▒▒φ  ██████████╬╬██
                                                   ▐████µ╙▓▀`     ,▀╙,╔╔φφφ╠░▄▓███████▌░▓╙▒▒▒╠ └██╬███████╬▓█⌐
                                                   ╫██ ▓▌         ▌φ▒▒░▓██████████████▌▒░▓╚▒▒▒╠ ▓██╬▓██████╣█▌
                                                   ██▌           ▌╔▒▒▄████████████████▒▒▒░▌╠▒▒▒≥▐██▓╬╬███████▌
                                                   ██▌      ,╓φ╠▓«▒▒▓████▀  ▀█████████▌▒▒▒╟░▒▒▒▒▐███╬╬╣████▓█▌
                                                  ▐██      ╠▒▄▓▓███▓████└     ▀████████▌▒▒░▌╚▒▒▒▐███▓╬╬████ ╙▌
                                                  ███  )  ╠▒░░░▒░╬████▀        └████████░▒▒░╬∩▒▒▓████╬╬╣███
                                                 ▓██    ╠╠▒▒▐█▀▀▌`░╫██           ███████▒▒▒▒░▒▒½█████╬╬╣███
                                                ███ ,█▄ ╠▒▒▒╫▌,▄▀,▒╫██           ╟██████▒▒▒░╣⌠▒▓█████╬╬╣██▌
                                               ╘██µ ██` ╠▒▒░██╬φ╠▄▓██`            ██████░░▌φ╠░▓█████▓╬╬▓██
                                                ╟██  .φ╠▒░▄█▀░░▄██▀└              █████▌▒╣φ▒░▓██████╬╬╣██
                                                 ▀██▄▄▄╓▄███████▀                ▐█████░▓φ▒▄███████▓╬╣██
                                                   ╙▀▀▀██▀└                      ████▓▄▀φ▄▓████████╬▓█▀
                                                                                ▓███╬╩╔╣██████████▓██└
                                                                              ╓████▀▄▓████████▀████▀
                                                                            ,▓███████████████─]██╙
                                                                         ,▄▓██████████████▀└  ╙
                                                                    ,╓▄▓███████████████▀╙
                                                             `"▀▀▀████████▀▀▀▀`▄███▀▀└
                                                                              └└



                    11\   11\                     11\             11\   11\            11\                                       11\
                  1111 |  \__|                    11 |            111\  11 |           11 |                                      11 |
                  \_11 |  11\ 1111111\   1111111\ 1111111\        1111\ 11 | 111111\ 111111\   11\  11\  11\  111111\   111111\  11 |  11\
                    11 |  11 |11  __11\ 11  _____|11  __11\       11 11\11 |11  __11\\_11  _|  11 | 11 | 11 |11  __11\ 11  __11\ 11 | 11  |
                    11 |  11 |11 |  11 |11 /      11 |  11 |      11 \1111 |11111111 | 11 |    11 | 11 | 11 |11 /  11 |11 |  \__|111111  /
                    11 |  11 |11 |  11 |11 |      11 |  11 |      11 |\111 |11   ____| 11 |11\ 11 | 11 | 11 |11 |  11 |11 |      11  _11<
                  111111\ 11 |11 |  11 |\1111111\ 11 |  11 |      11 | \11 |\1111111\  \1111  |\11111\1111  |\111111  |11 |      11 | \11\
                  \______|\__|\__|  \__| \_______|\__|  \__|      \__|  \__| \_______|  \____/  \_____\____/  \______/ \__|      \__|  \__|



                               111111\                                                               11\     11\
                              11  __11\                                                              11 |    \__|
                              11 /  11 | 111111\   111111\   111111\   111111\   111111\   111111\ 111111\   11\  111111\  1111111\
                              11111111 |11  __11\ 11  __11\ 11  __11\ 11  __11\ 11  __11\  \____11\\_11  _|  11 |11  __11\ 11  __11\
                              11  __11 |11 /  11 |11 /  11 |11 |  \__|11111111 |11 /  11 | 1111111 | 11 |    11 |11 /  11 |11 |  11 |
                              11 |  11 |11 |  11 |11 |  11 |11 |      11   ____|11 |  11 |11  __11 | 11 |11\ 11 |11 |  11 |11 |  11 |
                              11 |  11 |\1111111 |\1111111 |11 |      \1111111\ \1111111 |\1111111 | \1111  |11 |\111111  |11 |  11 |
                              \__|  \__| \____11 | \____11 |\__|       \_______| \____11 | \_______|  \____/ \__| \______/ \__|  \__|
                                        11\   11 |11\   11 |                    11\   11 |
                                        \111111  |\111111  |                    \111111  |
                                         \______/  \______/                      \______/
                                                1111111\                        11\
                                                11  __11\                       11 |
                                                11 |  11 | 111111\  11\   11\ 111111\    111111\   111111\
                                                1111111  |11  __11\ 11 |  11 |\_11  _|  11  __11\ 11  __11\
                                                11  __11< 11 /  11 |11 |  11 |  11 |    11111111 |11 |  \__|
                                                11 |  11 |11 |  11 |11 |  11 |  11 |11\ 11   ____|11 |
                                                11 |  11 |\111111  |\111111  |  \1111  |\1111111\ 11 |
                                                \__|  \__| \______/  \______/    \____/  \_______|\__|
*/

// File @openzeppelin/contracts/utils/[email protected]

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/[email protected]


pragma solidity ^0.7.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]


pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/math/[email protected]


pragma solidity ^0.7.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


// File @openzeppelin/contracts/utils/[email protected]


pragma solidity ^0.7.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]


pragma solidity ^0.7.0;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// File contracts/helpers/EthReceiver.sol


pragma solidity ^0.7.6;

/// @title Base contract with common payable logics
abstract contract EthReceiver {
    receive() external payable {
        // solhint-disable-next-line avoid-tx-origin
        require(msg.sender != tx.origin, "ETH deposit rejected");
    }
}


// File @openzeppelin/contracts/drafts/[email protected]


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over `owner`'s tokens,
     * given `owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for `permit`, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}


// File contracts/helpers/RevertReasonParser.sol


pragma solidity ^0.7.6;

/// @title Library that allows to parse unsuccessful arbitrary calls revert reasons.
/// See https://solidity.readthedocs.io/en/latest/control-structures.html#revert for details.
/// Note that we assume revert reason being abi-encoded as Error(string) so it may fail to parse reason
/// if structured reverts appear in the future.
///
/// All unsuccessful parsings get encoded as Unknown(data) string
library RevertReasonParser {
    bytes4 constant private _PANIC_SELECTOR = bytes4(keccak256("Panic(uint256)"));
    bytes4 constant private _ERROR_SELECTOR = bytes4(keccak256("Error(string)"));

    function parse(bytes memory data, string memory prefix) internal pure returns (string memory) {
        if (data.length >= 4) {
            bytes4 selector;
            assembly {  // solhint-disable-line no-inline-assembly
                selector := mload(add(data, 0x20))
            }

            // 68 = 4-byte selector + 32 bytes offset + 32 bytes length
            if (selector == _ERROR_SELECTOR && data.length >= 68) {
                uint256 offset;
                bytes memory reason;
                // solhint-disable no-inline-assembly
                assembly {
                    // 36 = 32 bytes data length + 4-byte selector
                    offset := mload(add(data, 36))
                    reason := add(data, add(36, offset))
                }
                /*
                    revert reason is padded up to 32 bytes with ABI encoder: Error(string)
                    also sometimes there is extra 32 bytes of zeros padded in the end:
                    https://github.com/ethereum/solidity/issues/10170
                    because of that we can't check for equality and instead check
                    that offset + string length + extra 36 bytes is less than overall data length
                */
                require(data.length >= 36 + offset + reason.length, "Invalid revert reason");
                return string(abi.encodePacked(prefix, "Error(", reason, ")"));
            }
            // 36 = 4-byte selector + 32 bytes integer
            else if (selector == _PANIC_SELECTOR && data.length == 36) {
                uint256 code;
                // solhint-disable no-inline-assembly
                assembly {
                    // 36 = 32 bytes data length + 4-byte selector
                    code := mload(add(data, 36))
                }
                return string(abi.encodePacked(prefix, "Panic(", _toHex(code), ")"));
            }
        }

        return string(abi.encodePacked(prefix, "Unknown(", _toHex(data), ")"));
    }

    function _toHex(uint256 value) private pure returns(string memory) {
        return _toHex(abi.encodePacked(value));
    }

    function _toHex(bytes memory data) private pure returns(string memory) {
        bytes16 alphabet = 0x30313233343536373839616263646566;
        bytes memory str = new bytes(2 + data.length * 2);
        str[0] = "0";
        str[1] = "x";
        for (uint256 i = 0; i < data.length; i++) {
            str[2 * i + 2] = alphabet[uint8(data[i] >> 4)];
            str[2 * i + 3] = alphabet[uint8(data[i] & 0x0f)];
        }
        return string(str);
    }
}


// File contracts/interfaces/IDaiLikePermit.sol


pragma solidity ^0.7.6;

/// @title Interface for DAI-style permits
interface IDaiLikePermit {
    function permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s) external;
}


// File contracts/helpers/Permitable.sol


pragma solidity ^0.7.6;



/// @title Base contract with common permit handling logics
contract Permitable {
    function _permit(address token, bytes calldata permit) internal {
        if (permit.length > 0) {
            bool success;
            bytes memory result;
            if (permit.length == 32 * 7) {
                // solhint-disable-next-line avoid-low-level-calls
                (success, result) = token.call(abi.encodePacked(IERC20Permit.permit.selector, permit));
            } else if (permit.length == 32 * 8) {
                // solhint-disable-next-line avoid-low-level-calls
                (success, result) = token.call(abi.encodePacked(IDaiLikePermit.permit.selector, permit));
            } else {
                revert("Wrong permit length");
            }
            if (!success) {
                revert(RevertReasonParser.parse(result, "Permit failed: "));
            }
        }
    }
}


// File contracts/helpers/UniERC20.sol


pragma solidity ^0.7.6;




library UniERC20 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(0);

    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }

    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    function uniTransfer(IERC20 token, address payable to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                to.transfer(amount);
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }

    function uniApprove(IERC20 token, address to, uint256 amount) internal {
        require(!isETH(token), "Approve called on ETH");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(abi.encodeWithSelector(token.approve.selector, to, amount));

        if (!success || (returndata.length > 0 && !abi.decode(returndata, (bool)))) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, to, 0));
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, to, amount));
        }
    }

    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory result) = address(token).call(data);
        if (!success) {
            revert(RevertReasonParser.parse(result, "Low-level call failed: "));
        }

        if (result.length > 0) { // Return data is optional
            require(abi.decode(result, (bool)), "ERC20 operation did not succeed");
        }
    }
}


// File contracts/interfaces/IAggregationExecutor.sol


pragma solidity ^0.7.6;

/// @title Interface for making arbitrary calls during swap
interface IAggregationExecutor {
    /// @notice Make calls on `msgSender` with specified data
    function callBytes(address msgSender, bytes calldata data) external payable;  // 0x2636f7f8
}


// File @openzeppelin/contracts/drafts/[email protected]


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;
    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = _getChainId();
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view virtual returns (bytes32) {
        if (_getChainId() == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(bytes32 typeHash, bytes32 name, bytes32 version) private view returns (bytes32) {
        return keccak256(
            abi.encode(
                typeHash,
                name,
                version,
                _getChainId(),
                address(this)
            )
        );
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", _domainSeparatorV4(), structHash));
    }

    function _getChainId() private view returns (uint256 chainId) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        // solhint-disable-next-line no-inline-assembly
        assembly {
            chainId := chainid()
        }
    }
}


// File contracts/helpers/ECDSA.sol


pragma solidity ^0.7.6;

/**
 * @dev Simplified copy of OpenZeppelin ECDSA library downgraded to 0.7.6
 * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/541e82144f691aa171c53ba8c3b32ef7f05b99a5/contracts/utils/cryptography/ECDSA.sol
 *
 * Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {  // solhint-disable-line no-inline-assembly
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {  // solhint-disable-line no-inline-assembly
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return address(0);
        }
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        bytes32 s;
        uint8 v;
        assembly {  // solhint-disable-line no-inline-assembly
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return address(0);
        }
        if (v != 27 && v != 28) {
            return address(0);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return address(0);
        }

        return signer;
    }
}


// File contracts/interfaces/IERC1271.sol


pragma solidity ^0.7.6;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}


// File contracts/interfaces/IWETH.sol


pragma solidity ^0.7.6;

/// @title Interface for WETH tokens
interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}


// File contracts/LimitOrderProtocolRFQ.sol


pragma solidity ^0.7.6;
pragma abicoder v2;







contract LimitOrderProtocolRFQ is EthReceiver, EIP712("1inch RFQ", "2"), Permitable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event OrderFilledRFQ(
        bytes32 orderHash,
        uint256 makingAmount
    );

    struct OrderRFQ {
        // lowest 64 bits is the order id, next 64 bits is the expiration timestamp
        // highest bit is unwrap WETH flag which is set on taker's side
        // [unwrap eth(1 bit) | unused (127 bits) | expiration timestamp(64 bits) | orderId (64 bits)]
        uint256 info;
        IERC20 makerAsset;
        IERC20 takerAsset;
        address maker;
        address allowedSender;  // equals to Zero address on public orders
        uint256 makingAmount;
        uint256 takingAmount;
    }

    bytes32 constant public LIMIT_ORDER_RFQ_TYPEHASH = keccak256(
        "OrderRFQ(uint256 info,address makerAsset,address takerAsset,address maker,address allowedSender,uint256 makingAmount,uint256 takingAmount)"
    );
    uint256 private constant _UNWRAP_WETH_MASK = 1 << 255;

    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    mapping(address => mapping(uint256 => uint256)) private _invalidator;

    constructor(address weth) {
        _WETH = IWETH(weth);
    }

    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns(bytes32) {
        return _domainSeparatorV4();
    }

    /// @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
    /// @return Result Each bit represents whenever corresponding quote was filled
    function invalidatorForOrderRFQ(address maker, uint256 slot) external view returns(uint256) {
        return _invalidator[maker][slot];
    }

    /// @notice Cancels order's quote
    function cancelOrderRFQ(uint256 orderInfo) external {
        _invalidateOrder(msg.sender, orderInfo);
    }

    /// @notice Fills order's quote, fully or partially (whichever is possible)
    /// @param order Order quote to fill
    /// @param signature Signature to confirm quote ownership
    /// @param makingAmount Making amount
    /// @param takingAmount Taking amount
    function fillOrderRFQ(
        OrderRFQ memory order,
        bytes calldata signature,
        uint256 makingAmount,
        uint256 takingAmount
    ) external payable returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */) {
        return fillOrderRFQTo(order, signature, makingAmount, takingAmount, payable(msg.sender));
    }

    /// @notice Fills Same as `fillOrderRFQ` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// Also allows to specify funds destination instead of `msg.sender`
    /// @param order Order quote to fill
    /// @param signature Signature to confirm quote ownership
    /// @param makingAmount Making amount
    /// @param takingAmount Taking amount
    /// @param target Address that will receive swap funds
    /// @param permit Should consist of abiencoded token address and encoded `IERC20Permit.permit` call.
    /// See tests for examples
    function fillOrderRFQToWithPermit(
        OrderRFQ memory order,
        bytes calldata signature,
        uint256 makingAmount,
        uint256 takingAmount,
        address payable target,
        bytes calldata permit
    ) external returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */) {
        _permit(address(order.takerAsset), permit);
        return fillOrderRFQTo(order, signature, makingAmount, takingAmount, target);
    }

    /// @notice Same as `fillOrderRFQ` but allows to specify funds destination instead of `msg.sender`
    /// @param order Order quote to fill
    /// @param signature Signature to confirm quote ownership
    /// @param makingAmount Making amount
    /// @param takingAmount Taking amount
    /// @param target Address that will receive swap funds
    function fillOrderRFQTo(
        OrderRFQ memory order,
        bytes calldata signature,
        uint256 makingAmount,
        uint256 takingAmount,
        address payable target
    ) public payable returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */) {
        address maker = order.maker;
        bool unwrapWETH = (order.info & _UNWRAP_WETH_MASK) > 0;
        order.info = order.info & (_UNWRAP_WETH_MASK - 1);  // zero-out unwrap weth flag as it is taker-only
        {  // Stack too deep
            uint256 info = order.info;
            // Check time expiration
            uint256 expiration = uint128(info) >> 64;
            require(expiration == 0 || block.timestamp <= expiration, "LOP: order expired");  // solhint-disable-line not-rely-on-time
            _invalidateOrder(maker, info);
        }

        {  // stack too deep
            uint256 orderMakingAmount = order.makingAmount;
            uint256 orderTakingAmount = order.takingAmount;
            // Compute partial fill if needed
            if (takingAmount == 0 && makingAmount == 0) {
                // Two zeros means whole order
                makingAmount = orderMakingAmount;
                takingAmount = orderTakingAmount;
            }
            else if (takingAmount == 0) {
                require(makingAmount <= orderMakingAmount, "LOP: making amount exceeded");
                takingAmount = orderTakingAmount.mul(makingAmount).add(orderMakingAmount - 1).div(orderMakingAmount);
            }
            else if (makingAmount == 0) {
                require(takingAmount <= orderTakingAmount, "LOP: taking amount exceeded");
                makingAmount = orderMakingAmount.mul(takingAmount).div(orderTakingAmount);
            }
            else {
                revert("LOP: one of amounts should be 0");
            }
        }

        require(makingAmount > 0 && takingAmount > 0, "LOP: can't swap 0 amount");

        // Validate order
        require(order.allowedSender == address(0) || order.allowedSender == msg.sender, "LOP: private order");
        bytes32 orderHash = _hashTypedDataV4(keccak256(abi.encode(LIMIT_ORDER_RFQ_TYPEHASH, order)));
        _validate(maker, orderHash, signature);

        // Maker => Taker
        if (order.makerAsset == _WETH && unwrapWETH) {
            order.makerAsset.safeTransferFrom(maker, address(this), makingAmount);
            _WETH.withdraw(makingAmount);
            target.transfer(makingAmount);
        } else {
            order.makerAsset.safeTransferFrom(maker, target, makingAmount);
        }
        // Taker => Maker
        if (order.takerAsset == _WETH && msg.value > 0) {
            require(msg.value == takingAmount, "LOP: wrong msg.value");
            _WETH.deposit{ value: takingAmount }();
            _WETH.transfer(maker, takingAmount);
        } else {
            require(msg.value == 0, "LOP: wrong msg.value");
            order.takerAsset.safeTransferFrom(msg.sender, maker, takingAmount);
        }

        emit OrderFilledRFQ(orderHash, makingAmount);
        return (makingAmount, takingAmount);
    }

    function _validate(address signer, bytes32 orderHash, bytes calldata signature) private view {
        if (ECDSA.tryRecover(orderHash, signature) != signer) {
            (bool success, bytes memory result) = signer.staticcall(
                abi.encodeWithSelector(IERC1271.isValidSignature.selector, orderHash, signature)
            );
            require(success && result.length == 32 && abi.decode(result, (bytes4)) == IERC1271.isValidSignature.selector, "LOP: bad signature");
        }
    }

    function _invalidateOrder(address maker, uint256 orderInfo) private {
        uint256 invalidatorSlot = uint64(orderInfo) >> 8;
        uint256 invalidatorBit = 1 << uint8(orderInfo);
        mapping(uint256 => uint256) storage invalidatorStorage = _invalidator[maker];
        uint256 invalidator = invalidatorStorage[invalidatorSlot];
        require(invalidator & invalidatorBit == 0, "LOP: invalidated order");
        invalidatorStorage[invalidatorSlot] = invalidator | invalidatorBit;
    }
}


// File contracts/UnoswapRouter.sol


pragma solidity ^0.7.6;



contract UnoswapRouter is EthReceiver, Permitable {
    uint256 private constant _TRANSFER_FROM_CALL_SELECTOR_32 = 0x23b872dd00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_DEPOSIT_CALL_SELECTOR_32 = 0xd0e30db000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_WITHDRAW_CALL_SELECTOR_32 = 0x2e1a7d4d00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _ERC20_TRANSFER_CALL_SELECTOR_32 = 0xa9059cbb00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _REVERSE_MASK =   0x8000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_MASK =      0x4000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _NUMERATOR_MASK = 0x0000000000000000ffffffff0000000000000000000000000000000000000000;
    /// @dev WETH address is network-specific and needs to be changed before deployment.
    /// It can not be moved to immutable as immutables are not supported in assembly
    uint256 private constant _WETH = 0x000000000000000000000000C02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    uint256 private constant _UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32 = 0x0902f1ac00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _UNISWAP_PAIR_SWAP_CALL_SELECTOR_32 = 0x022c0d9f00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _DENOMINATOR = 1000000000;
    uint256 private constant _NUMERATOR_OFFSET = 160;

    /// @notice Same as `unoswap` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function unoswapWithPermit(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata pools,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        _permit(address(srcToken), permit);
        return unoswap(srcToken, amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function unoswap(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        // solhint-disable-next-line no-unused-vars
        bytes32[] calldata pools
    ) public payable returns(uint256 returnAmount) {
        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function revertWithReason(m, len) {
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(0x20, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(0x40, m)
                revert(0, len)
            }

            function swap(emptyPtr, swapAmount, pair, reversed, numerator, dst) -> ret {
                mstore(emptyPtr, _UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32)
                if iszero(staticcall(gas(), pair, emptyPtr, 0x4, emptyPtr, 0x40)) {
                    reRevert()
                }
                if iszero(eq(returndatasize(), 0x60)) {
                    revertWithReason(0x0000001472657365727665732063616c6c206661696c65640000000000000000, 0x59)  // "reserves call failed"
                }

                let reserve0 := mload(emptyPtr)
                let reserve1 := mload(add(emptyPtr, 0x20))
                if reversed {
                    let tmp := reserve0
                    reserve0 := reserve1
                    reserve1 := tmp
                }
                ret := mul(swapAmount, numerator)
                ret := div(mul(ret, reserve1), add(ret, mul(reserve0, _DENOMINATOR)))

                mstore(emptyPtr, _UNISWAP_PAIR_SWAP_CALL_SELECTOR_32)
                switch reversed
                case 0 {
                    mstore(add(emptyPtr, 0x04), 0)
                    mstore(add(emptyPtr, 0x24), ret)
                }
                default {
                    mstore(add(emptyPtr, 0x04), ret)
                    mstore(add(emptyPtr, 0x24), 0)
                }
                mstore(add(emptyPtr, 0x44), dst)
                mstore(add(emptyPtr, 0x64), 0x80)
                mstore(add(emptyPtr, 0x84), 0)
                if iszero(call(gas(), pair, 0, emptyPtr, 0xa4, 0, 0)) {
                    reRevert()
                }
            }

            let emptyPtr := mload(0x40)
            mstore(0x40, add(emptyPtr, 0xc0))

            let poolsOffset := add(calldataload(0x64), 0x4)
            let poolsEndOffset := calldataload(poolsOffset)
            poolsOffset := add(poolsOffset, 0x20)
            poolsEndOffset := add(poolsOffset, mul(0x20, poolsEndOffset))
            let rawPair := calldataload(poolsOffset)
            switch srcToken
            case 0 {
                if iszero(eq(amount, callvalue())) {
                    revertWithReason(0x00000011696e76616c6964206d73672e76616c75650000000000000000000000, 0x55)  // "invalid msg.value"
                }

                mstore(emptyPtr, _WETH_DEPOSIT_CALL_SELECTOR_32)
                if iszero(call(gas(), _WETH, amount, emptyPtr, 0x4, 0, 0)) {
                    reRevert()
                }

                mstore(emptyPtr, _ERC20_TRANSFER_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x4), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x24), amount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x44, 0, 0)) {
                    reRevert()
                }
            }
            default {
                if callvalue() {
                    revertWithReason(0x00000011696e76616c6964206d73672e76616c75650000000000000000000000, 0x55)  // "invalid msg.value"
                }

                mstore(emptyPtr, _TRANSFER_FROM_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x4), caller())
                mstore(add(emptyPtr, 0x24), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x44), amount)
                if iszero(call(gas(), srcToken, 0, emptyPtr, 0x64, 0, 0)) {
                    reRevert()
                }
            }

            returnAmount := amount

            for {let i := add(poolsOffset, 0x20)} lt(i, poolsEndOffset) {i := add(i, 0x20)} {
                let nextRawPair := calldataload(i)

                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    and(nextRawPair, _ADDRESS_MASK)
                )

                rawPair := nextRawPair
            }

            switch and(rawPair, _WETH_MASK)
            case 0 {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    caller()
                )
            }
            default {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    address()
                )

                mstore(emptyPtr, _WETH_WITHDRAW_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x04), returnAmount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x24, 0, 0)) {
                    reRevert()
                }

                if iszero(call(gas(), caller(), returnAmount, 0, 0, 0, 0)) {
                    reRevert()
                }
            }

            if lt(returnAmount, minReturn) {
                revertWithReason(0x000000164d696e2072657475726e206e6f742072656163686564000000000000, 0x5a)  // "Min return not reached"
            }
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]


pragma solidity ^0.7.0;


/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        require(value < 2**255, "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}


// File contracts/interfaces/IUniswapV3Pool.sol

pragma solidity ^0.7.6;

interface IUniswapV3Pool {
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}


// File contracts/interfaces/IUniswapV3SwapCallback.sol

pragma solidity ^0.7.6;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}


// File contracts/UnoswapV3Router.sol


pragma solidity ^0.7.6;









contract UnoswapV3Router is EthReceiver, Permitable, IUniswapV3SwapCallback {
    using Address for address payable;
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    uint256 private constant _ONE_FOR_ZERO_MASK = 1 << 255;
    uint256 private constant _WETH_WRAP_MASK = 1 << 254;
    uint256 private constant _WETH_UNWRAP_MASK = 1 << 253;
    bytes32 private constant _POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
    bytes32 private constant _FF_FACTORY = 0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000;
    bytes32 private constant _SELECTORS = 0x0dfe1681d21220a7ddca3f430000000000000000000000000000000000000000;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 private constant _MIN_SQRT_RATIO = 4295128739 + 1;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 private constant _MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342 - 1;
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(address weth) {
        _WETH = IWETH(weth);
    }

    /// @notice Same as `uniswapV3SwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function uniswapV3SwapToWithPermit(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        _permit(address(srcToken), permit);
        return uniswapV3SwapTo(recipient, amount, minReturn, pools);
    }

    /// @notice Same as `uniswapV3SwapTo` but uses `msg.sender` as recipient
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3Swap(
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return uniswapV3SwapTo(msg.sender, amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap V3 exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3SwapTo(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) public payable returns(uint256 returnAmount) {
        uint256 len = pools.length;
        require(len > 0, "UNIV3R: empty pools");
        uint256 lastIndex = len - 1;
        returnAmount = amount;
        bool wrapWeth = pools[0] & _WETH_WRAP_MASK > 0;
        bool unwrapWeth = pools[lastIndex] & _WETH_UNWRAP_MASK > 0;
        if (wrapWeth) {
            require(msg.value == amount, "UNIV3R: wrong msg.value");
            _WETH.deposit{value: amount}();
        } else {
            require(msg.value == 0, "UNIV3R: msg.value should be 0");
        }
        if (len > 1) {
            returnAmount = _makeSwap(address(this), wrapWeth ? address(this) : msg.sender, pools[0], returnAmount);

            for (uint256 i = 1; i < lastIndex; i++) {
                returnAmount = _makeSwap(address(this), address(this), pools[i], returnAmount);
            }
            returnAmount = _makeSwap(unwrapWeth ? address(this) : recipient, address(this), pools[lastIndex], returnAmount);
        } else {
            returnAmount = _makeSwap(unwrapWeth ? address(this) : recipient, wrapWeth ? address(this) : msg.sender, pools[0], returnAmount);
        }

        require(returnAmount >= minReturn, "UNIV3R: min return");

        if (unwrapWeth) {
            _WETH.withdraw(returnAmount);
            recipient.sendValue(returnAmount);
        }
    }

    /// @inheritdoc IUniswapV3SwapCallback
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata /* data */
    ) external override {
        IERC20 token0;
        IERC20 token1;
        bytes32 ffFactoryAddress = _FF_FACTORY;
        bytes32 poolInitCodeHash = _POOL_INIT_CODE_HASH;
        address payer;

        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function revertWithReason(m, len) {
                mstore(0x00, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(0x20, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(0x40, m)
                revert(0, len)
            }

            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 0x20)
            mstore(emptyPtr, _SELECTORS)

            if iszero(staticcall(gas(), caller(), emptyPtr, 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            token0 := mload(resultPtr)
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x4), 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            token1 := mload(resultPtr)
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x8), 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            let fee := mload(resultPtr)

            let p := emptyPtr
            mstore(p, ffFactoryAddress)
            p := add(p, 21)
            // Compute the inner hash in-place
            mstore(p, token0)
            mstore(add(p, 32), token1)
            mstore(add(p, 64), fee)
            mstore(p, keccak256(p, 96))
            p := add(p, 32)
            mstore(p, poolInitCodeHash)
            let pool := and(keccak256(emptyPtr, 85), _ADDRESS_MASK)

            if iszero(eq(pool, caller())) {
                revertWithReason(0x00000010554e495633523a2062616420706f6f6c000000000000000000000000, 0x54)  // UNIV3R: bad pool
            }

            calldatacopy(emptyPtr, 0x84, 0x20)
            payer := mload(emptyPtr)
        }

        if (amount0Delta > 0) {
            if (payer == address(this)) {
                token0.safeTransfer(msg.sender, uint256(amount0Delta));
            } else {
                token0.safeTransferFrom(payer, msg.sender, uint256(amount0Delta));
            }
        }
        if (amount1Delta > 0) {
            if (payer == address(this)) {
                token1.safeTransfer(msg.sender, uint256(amount1Delta));
            } else {
                token1.safeTransferFrom(payer, msg.sender, uint256(amount1Delta));
            }
        }
    }

    function _makeSwap(address recipient, address payer, uint256 pool, uint256 amount) private returns (uint256) {
        bool zeroForOne = pool & _ONE_FOR_ZERO_MASK == 0;
        if (zeroForOne) {
            (, int256 amount1) = IUniswapV3Pool(pool).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MIN_SQRT_RATIO,
                abi.encode(payer)
            );
            return SafeCast.toUint256(-amount1);
        } else {
            (int256 amount0,) = IUniswapV3Pool(pool).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MAX_SQRT_RATIO,
                abi.encode(payer)
            );
            return SafeCast.toUint256(-amount0);
        }
    }
}


// File contracts/interfaces/IClipperExchangeInterface.sol


pragma solidity ^0.7.6;

/// @title Clipper interface subset used in swaps
interface IClipperExchangeInterface {
    function sellTokenForToken(IERC20 inputToken, IERC20 outputToken, address recipient, uint256 minBuyAmount, bytes calldata auxiliaryData) external returns (uint256 boughtAmount);
    function sellEthForToken(IERC20 outputToken, address recipient, uint256 minBuyAmount, bytes calldata auxiliaryData) external payable returns (uint256 boughtAmount);
    function sellTokenForEth(IERC20 inputToken, address payable recipient, uint256 minBuyAmount, bytes calldata auxiliaryData) external returns (uint256 boughtAmount);
    function theExchange() external returns (address payable);
}


// File contracts/ClipperRouter.sol


pragma solidity ^0.7.6;






/// @title Clipper router that allows to use `ClipperExchangeInterface` for swaps
contract ClipperRouter is EthReceiver, Permitable {
    using SafeERC20 for IERC20;

    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    IERC20 private constant _ETH = IERC20(address(0));
    bytes private constant _INCH_TAG = "1INCH";
    IClipperExchangeInterface private immutable _clipperExchange;
    address payable private immutable _clipperPool;

    constructor(
        address weth,
        IClipperExchangeInterface clipperExchange
    ) {
        _clipperExchange = clipperExchange;
        _clipperPool = clipperExchange.theExchange();
        _WETH = IWETH(weth);
    }

    /// @notice Same as `clipperSwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function clipperSwapToWithPermit(
        address payable recipient,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 amount,
        uint256 minReturn,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        _permit(address(srcToken), permit);
        return clipperSwapTo(recipient, srcToken, dstToken, amount, minReturn);
    }

    /// @notice Same as `clipperSwapTo` but uses `msg.sender` as recipient
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    function clipperSwap(
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 amount,
        uint256 minReturn
    ) external payable returns(uint256 returnAmount) {
        return clipperSwapTo(msg.sender, srcToken, dstToken, amount, minReturn);
    }

    /// @notice Performs swap using Clipper exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    function clipperSwapTo(
        address payable recipient,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 amount,
        uint256 minReturn
    ) public payable returns(uint256 returnAmount) {
        bool srcETH;
        if (srcToken == _WETH) {
            require(msg.value == 0, "CL1IN: msg.value should be 0");
            _WETH.transferFrom(msg.sender, address(this), amount);
            _WETH.withdraw(amount);
            srcETH = true;
        }
        else if (srcToken == _ETH) {
            require(msg.value == amount, "CL1IN: wrong msg.value");
            srcETH = true;
        }
        else {
            require(msg.value == 0, "CL1IN: msg.value should be 0");
            srcToken.safeTransferFrom(msg.sender, _clipperPool, amount);
        }

        if (srcETH) {
            _clipperPool.transfer(amount);
            returnAmount = _clipperExchange.sellEthForToken(dstToken, recipient, minReturn, _INCH_TAG);
        } else if (dstToken == _WETH) {
            returnAmount = _clipperExchange.sellTokenForEth(srcToken, address(this), minReturn, _INCH_TAG);
            _WETH.deposit{ value: returnAmount }();
            _WETH.transfer(recipient, returnAmount);
        } else if (dstToken == _ETH) {
            returnAmount = _clipperExchange.sellTokenForEth(srcToken, recipient, minReturn, _INCH_TAG);
        } else {
            returnAmount = _clipperExchange.sellTokenForToken(srcToken, dstToken, recipient, minReturn, _INCH_TAG);
        }
    }
}


// File contracts/AggregationRouterV4.sol


pragma solidity ^0.7.6;



contract AggregationRouterV4 is Ownable, EthReceiver, Permitable, UnoswapRouter, UnoswapV3Router, LimitOrderProtocolRFQ, ClipperRouter {
    using SafeMath for uint256;
    using UniERC20 for IERC20;
    using SafeERC20 for IERC20;

    uint256 private constant _PARTIAL_FILL = 1 << 0;
    uint256 private constant _REQUIRES_EXTRA_ETH = 1 << 1;

    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address payable srcReceiver;
        address payable dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 flags;
        bytes permit;
    }

    constructor(address weth, IClipperExchangeInterface _clipperExchange)
        UnoswapV3Router(weth)
        LimitOrderProtocolRFQ(weth)
        ClipperRouter(weth, _clipperExchange)
    {}  // solhint-disable-line no-empty-blocks

    /// @notice Performs a swap, delegating all calls encoded in `data` to `caller`. See tests for usage examples
    /// @param caller Aggregation executor that executes calls described in `data`
    /// @param desc Swap description
    /// @param data Encoded calls that `caller` should execute in between of swaps
    /// @return returnAmount Resulting token amount
    /// @return spentAmount Source token amount
    /// @return gasLeft Gas left
    function swap(
        IAggregationExecutor caller,
        SwapDescription calldata desc,
        bytes calldata data
    )
        external
        payable
        returns (
            uint256 returnAmount,
            uint256 spentAmount,
            uint256 gasLeft
        )
    {
        require(desc.minReturnAmount > 0, "Min return should not be 0");
        require(data.length > 0, "data should not be empty");

        uint256 flags = desc.flags;
        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;

        bool srcETH = srcToken.isETH();
        if (flags & _REQUIRES_EXTRA_ETH != 0) {
            require(msg.value > (srcETH ? desc.amount : 0), "Invalid msg.value");
        } else {
            require(msg.value == (srcETH ? desc.amount : 0), "Invalid msg.value");
        }

        if (!srcETH) {
            _permit(address(srcToken), desc.permit);
            srcToken.safeTransferFrom(msg.sender, desc.srcReceiver, desc.amount);
        }

        {
            bytes memory callData = abi.encodePacked(caller.callBytes.selector, bytes12(0), msg.sender, data);
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, bytes memory result) = address(caller).call{value: msg.value}(callData);
            if (!success) {
                revert(RevertReasonParser.parse(result, "callBytes failed: "));
            }
        }

        spentAmount = desc.amount;
        returnAmount = dstToken.uniBalanceOf(address(this));

        if (flags & _PARTIAL_FILL != 0) {
            uint256 unspentAmount = srcToken.uniBalanceOf(address(this));
            if (unspentAmount > 0) {
                spentAmount = spentAmount.sub(unspentAmount);
                srcToken.uniTransfer(msg.sender, unspentAmount);
            }
            require(returnAmount.mul(desc.amount) >= desc.minReturnAmount.mul(spentAmount), "Return amount is not enough");
        } else {
            require(returnAmount >= desc.minReturnAmount, "Return amount is not enough");
        }

        address payable dstReceiver = (desc.dstReceiver == address(0)) ? msg.sender : desc.dstReceiver;
        dstToken.uniTransfer(dstReceiver, returnAmount);

        gasLeft = gasleft();
    }

    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(msg.sender, amount);
    }

    function destroy() external onlyOwner {
        selfdestruct(msg.sender);
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// File: contracts/uniswapv2/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function migrator() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
    function setMigrator(address) external;
}

// File: contracts/uniswapv2/libraries/SafeMath.sol

pragma solidity =0.6.12;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMathUniswap {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/uniswapv2/UniswapV2ERC20.sol

pragma solidity =0.6.12;


contract UniswapV2ERC20 {
    using SafeMathUniswap for uint;

    string public constant name = 'SushiSwap LP Token';
    string public constant symbol = 'SLP';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid()
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/uniswapv2/libraries/Math.sol

pragma solidity =0.6.12;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/uniswapv2/libraries/UQ112x112.sol

pragma solidity =0.6.12;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/uniswapv2/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20Uniswap {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/uniswapv2/UniswapV2Pair.sol

pragma solidity =0.6.12;








interface IMigrator {
    // Return the desired amount of liquidity token that the migrator wants.
    function desiredLiquidity() external view returns (uint256);
}

contract UniswapV2Pair is UniswapV2ERC20 {
    using SafeMathUniswap  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20Uniswap(token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            address migrator = IUniswapV2Factory(factory).migrator();
            if (msg.sender == migrator) {
                liquidity = IMigrator(migrator).desiredLiquidity();
                require(liquidity > 0 && liquidity != uint256(-1), "Bad desired liquidity");
            } else {
                require(migrator == address(0), "Must not have migrator");
                liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
                _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
            }
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20Uniswap(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20Uniswap(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20Uniswap(token0).balanceOf(address(this)), IERC20Uniswap(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.1;
/**
 * @title ERC20 token receiver interface
 *
 * @dev Interface for any contract that wants to support safe transfers
 *      from ERC20 token smart contracts.
 * @dev Inspired by ERC721 and ERC223 token standards
 *
 * @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
 * @dev See https://github.com/ethereum/EIPs/issues/223
 *
 * @author Basil Gorin
 */
interface ERC20Receiver {
  /**
   * @notice Handle the receipt of a ERC20 token(s)
   * @dev The ERC20 smart contract calls this function on the recipient
   *      after a successful transfer (`safeTransferFrom`).
   *      This function MAY throw to revert and reject the transfer.
   *      Return of other than the magic value MUST result in the transaction being reverted.
   * @notice The contract address is always the message sender.
   *      A wallet/broker/auction application MUST implement the wallet interface
   *      if it will accept safe transfers.
   * @param _operator The address which called `safeTransferFrom` function
   * @param _from The address which previously owned the token
   * @param _value amount of tokens which is being transferred
   * @param _data additional data with no specified format
   * @return `bytes4(keccak256("onERC20Received(address,address,uint256,bytes)"))` unless throwing
   */
  function onERC20Received(address _operator, address _from, uint256 _value, bytes calldata _data) external returns(bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.1;
import "../utils/AddressUtils.sol";
import "../utils/AccessControl.sol";
import "./ERC20Receiver.sol";
/**
 * @title Illuvium (ILV) ERC20 token
 *
 * @notice Illuvium is a core ERC20 token powering the game.
 *      It serves as an in-game currency, is tradable on exchanges,
 *      it powers up the governance protocol (Illuvium DAO) and participates in Yield Farming.
 *
 * @dev Token Summary:
 *      - Symbol: ILV
 *      - Name: Illuvium
 *      - Decimals: 18
 *      - Initial token supply: 7,000,000 ILV
 *      - Maximum final token supply: 10,000,000 ILV
 *          - Up to 3,000,000 ILV may get minted in 3 years period via yield farming
 *      - Mintable: total supply may increase
 *      - Burnable: total supply may decrease
 *
 * @dev Token balances and total supply are effectively 192 bits long, meaning that maximum
 *      possible total supply smart contract is able to track is 2^192 (close to 10^40 tokens)
 *
 * @dev Smart contract doesn't use safe math. All arithmetic operations are overflow/underflow safe.
 *      Additionally, Solidity 0.8.1 enforces overflow/underflow safety.
 *
 * @dev ERC20: reviewed according to https://eips.ethereum.org/EIPS/eip-20
 *
 * @dev ERC20: contract has passed OpenZeppelin ERC20 tests,
 *      see https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/test/token/ERC20/ERC20.behavior.js
 *      see https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/test/token/ERC20/ERC20.test.js
 *      see adopted copies of these tests in the `test` folder
 *
 * @dev ERC223/ERC777: not supported;
 *      send tokens via `safeTransferFrom` and implement `ERC20Receiver.onERC20Received` on the receiver instead
 *
 * @dev Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9) - resolved
 *      Related events and functions are marked with "ISBN:978-1-7281-3027-9" tag:
 *        - event Transferred(address indexed _by, address indexed _from, address indexed _to, uint256 _value)
 *        - event Approved(address indexed _owner, address indexed _spender, uint256 _oldValue, uint256 _value)
 *        - function increaseAllowance(address _spender, uint256 _value) public returns (bool)
 *        - function decreaseAllowance(address _spender, uint256 _value) public returns (bool)
 *      See: https://ieeexplore.ieee.org/document/8802438
 *      See: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
 *
 * @author Basil Gorin
 */
contract IlluviumERC20 is AccessControl {
  /**
   * @dev Smart contract unique identifier, a random number
   * @dev Should be regenerated each time smart contact source code is changed
   *      and changes smart contract itself is to be redeployed
   * @dev Generated using https://www.random.org/bytes/
   */
  uint256 public constant TOKEN_UID = 0x83ecb176af7c4f35a45ff0018282e3a05a1018065da866182df12285866f5a2c;
  /**
   * @notice Name of the token: Illuvium
   *
   * @notice ERC20 name of the token (long name)
   *
   * @dev ERC20 `function name() public view returns (string)`
   *
   * @dev Field is declared public: getter name() is created when compiled,
   *      it returns the name of the token.
   */
  string public constant name = "Illuvium";
  /**
   * @notice Symbol of the token: ILV
   *
   * @notice ERC20 symbol of that token (short name)
   *
   * @dev ERC20 `function symbol() public view returns (string)`
   *
   * @dev Field is declared public: getter symbol() is created when compiled,
   *      it returns the symbol of the token
   */
  string public constant symbol = "ILV";
  /**
   * @notice Decimals of the token: 18
   *
   * @dev ERC20 `function decimals() public view returns (uint8)`
   *
   * @dev Field is declared public: getter decimals() is created when compiled,
   *      it returns the number of decimals used to get its user representation.
   *      For example, if `decimals` equals `6`, a balance of `1,500,000` tokens should
   *      be displayed to a user as `1,5` (`1,500,000 / 10 ** 6`).
   *
   * @dev NOTE: This information is only used for _display_ purposes: it in
   *      no way affects any of the arithmetic of the contract, including balanceOf() and transfer().
   */
  uint8 public constant decimals = 18;
  /**
   * @notice Total supply of the token: initially 7,000,000,
   *      with the potential to grow up to 10,000,000 during yield farming period (3 years)
   *
   * @dev ERC20 `function totalSupply() public view returns (uint256)`
   *
   * @dev Field is declared public: getter totalSupply() is created when compiled,
   *      it returns the amount of tokens in existence.
   */
  uint256 public totalSupply; // is set to 7 million * 10^18 in the constructor
  /**
   * @dev A record of all the token balances
   * @dev This mapping keeps record of all token owners:
   *      owner => balance
   */
  mapping(address => uint256) public tokenBalances;
  /**
   * @notice A record of each account's voting delegate
   *
   * @dev Auxiliary data structure used to sum up an account's voting power
   *
   * @dev This mapping keeps record of all voting power delegations:
   *      voting delegator (token owner) => voting delegate
   */
  mapping(address => address) public votingDelegates;
  /**
   * @notice A voting power record binds voting power of a delegate to a particular
   *      block when the voting power delegation change happened
   */
  struct VotingPowerRecord {
    /*
     * @dev block.number when delegation has changed; starting from
     *      that block voting power value is in effect
     */
    uint64 blockNumber;
    /*
     * @dev cumulative voting power a delegate has obtained starting
     *      from the block stored in blockNumber
     */
    uint192 votingPower;
  }
  /**
   * @notice A record of each account's voting power
   *
   * @dev Primarily data structure to store voting power for each account.
   *      Voting power sums up from the account's token balance and delegated
   *      balances.
   *
   * @dev Stores current value and entire history of its changes.
   *      The changes are stored as an array of checkpoints.
   *      Checkpoint is an auxiliary data structure containing voting
   *      power (number of votes) and block number when the checkpoint is saved
   *
   * @dev Maps voting delegate => voting power record
   */
  mapping(address => VotingPowerRecord[]) public votingPowerHistory;
  /**
   * @dev A record of nonces for signing/validating signatures in `delegateWithSig`
   *      for every delegate, increases after successful validation
   *
   * @dev Maps delegate address => delegate nonce
   */
  mapping(address => uint256) public nonces;
  /**
   * @notice A record of all the allowances to spend tokens on behalf
   * @dev Maps token owner address to an address approved to spend
   *      some tokens on behalf, maps approved address to that amount
   * @dev owner => spender => value
   */
  mapping(address => mapping(address => uint256)) public transferAllowances;
  /**
   * @notice Enables ERC20 transfers of the tokens
   *      (transfer by the token owner himself)
   * @dev Feature FEATURE_TRANSFERS must be enabled in order for
   *      `transfer()` function to succeed
   */
  uint32 public constant FEATURE_TRANSFERS = 0x0000_0001;
  /**
   * @notice Enables ERC20 transfers on behalf
   *      (transfer by someone else on behalf of token owner)
   * @dev Feature FEATURE_TRANSFERS_ON_BEHALF must be enabled in order for
   *      `transferFrom()` function to succeed
   * @dev Token owner must call `approve()` first to authorize
   *      the transfer on behalf
   */
  uint32 public constant FEATURE_TRANSFERS_ON_BEHALF = 0x0000_0002;
  /**
   * @dev Defines if the default behavior of `transfer` and `transferFrom`
   *      checks if the receiver smart contract supports ERC20 tokens
   * @dev When feature FEATURE_UNSAFE_TRANSFERS is enabled the transfers do not
   *      check if the receiver smart contract supports ERC20 tokens,
   *      i.e. `transfer` and `transferFrom` behave like `unsafeTransferFrom`
   * @dev When feature FEATURE_UNSAFE_TRANSFERS is disabled (default) the transfers
   *      check if the receiver smart contract supports ERC20 tokens,
   *      i.e. `transfer` and `transferFrom` behave like `safeTransferFrom`
   */
  uint32 public constant FEATURE_UNSAFE_TRANSFERS = 0x0000_0004;
  /**
   * @notice Enables token owners to burn their own tokens,
   *      including locked tokens which are burnt first
   * @dev Feature FEATURE_OWN_BURNS must be enabled in order for
   *      `burn()` function to succeed when called by token owner
   */
  uint32 public constant FEATURE_OWN_BURNS = 0x0000_0008;
  /**
   * @notice Enables approved operators to burn tokens on behalf of their owners,
   *      including locked tokens which are burnt first
   * @dev Feature FEATURE_OWN_BURNS must be enabled in order for
   *      `burn()` function to succeed when called by approved operator
   */
  uint32 public constant FEATURE_BURNS_ON_BEHALF = 0x0000_0010;
  /**
   * @notice Enables delegators to elect delegates
   * @dev Feature FEATURE_DELEGATIONS must be enabled in order for
   *      `delegate()` function to succeed
   */
  uint32 public constant FEATURE_DELEGATIONS = 0x0000_0020;
  /**
   * @notice Enables delegators to elect delegates on behalf
   *      (via an EIP712 signature)
   * @dev Feature FEATURE_DELEGATIONS must be enabled in order for
   *      `delegateWithSig()` function to succeed
   */
  uint32 public constant FEATURE_DELEGATIONS_ON_BEHALF = 0x0000_0040;
  /**
   * @notice Token creator is responsible for creating (minting)
   *      tokens to an arbitrary address
   * @dev Role ROLE_TOKEN_CREATOR allows minting tokens
   *      (calling `mint` function)
   */
  uint32 public constant ROLE_TOKEN_CREATOR = 0x0001_0000;
  /**
   * @notice Token destroyer is responsible for destroying (burning)
   *      tokens owned by an arbitrary address
   * @dev Role ROLE_TOKEN_DESTROYER allows burning tokens
   *      (calling `burn` function)
   */
  uint32 public constant ROLE_TOKEN_DESTROYER = 0x0002_0000;
  /**
   * @notice ERC20 receivers are allowed to receive tokens without ERC20 safety checks,
   *      which may be useful to simplify tokens transfers into "legacy" smart contracts
   * @dev When `FEATURE_UNSAFE_TRANSFERS` is not enabled addresses having
   *      `ROLE_ERC20_RECEIVER` permission are allowed to receive tokens
   *      via `transfer` and `transferFrom` functions in the same way they
   *      would via `unsafeTransferFrom` function
   * @dev When `FEATURE_UNSAFE_TRANSFERS` is enabled `ROLE_ERC20_RECEIVER` permission
   *      doesn't affect the transfer behaviour since
   *      `transfer` and `transferFrom` behave like `unsafeTransferFrom` for any receiver
   * @dev ROLE_ERC20_RECEIVER is a shortening for ROLE_UNSAFE_ERC20_RECEIVER
   */
  uint32 public constant ROLE_ERC20_RECEIVER = 0x0004_0000;
  /**
   * @notice ERC20 senders are allowed to send tokens without ERC20 safety checks,
   *      which may be useful to simplify tokens transfers into "legacy" smart contracts
   * @dev When `FEATURE_UNSAFE_TRANSFERS` is not enabled senders having
   *      `ROLE_ERC20_SENDER` permission are allowed to send tokens
   *      via `transfer` and `transferFrom` functions in the same way they
   *      would via `unsafeTransferFrom` function
   * @dev When `FEATURE_UNSAFE_TRANSFERS` is enabled `ROLE_ERC20_SENDER` permission
   *      doesn't affect the transfer behaviour since
   *      `transfer` and `transferFrom` behave like `unsafeTransferFrom` for any receiver
   * @dev ROLE_ERC20_SENDER is a shortening for ROLE_UNSAFE_ERC20_SENDER
   */
  uint32 public constant ROLE_ERC20_SENDER = 0x0008_0000;
  /**
   * @dev Magic value to be returned by ERC20Receiver upon successful reception of token(s)
   * @dev Equal to `bytes4(keccak256("onERC20Received(address,address,uint256,bytes)"))`,
   *      which can be also obtained as `ERC20Receiver(address(0)).onERC20Received.selector`
   */
  bytes4 private constant ERC20_RECEIVED = 0x4fc35859;
  /**
   * @notice EIP-712 contract's domain typeHash, see https://eips.ethereum.org/EIPS/eip-712#rationale-for-typehash
   */
  bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
  /**
   * @notice EIP-712 delegation struct typeHash, see https://eips.ethereum.org/EIPS/eip-712#rationale-for-typehash
   */
  bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegate,uint256 nonce,uint256 expiry)");
  /**
   * @dev Fired in transfer(), transferFrom() and some other (non-ERC20) functions
   *
   * @dev ERC20 `event Transfer(address indexed _from, address indexed _to, uint256 _value)`
   *
   * @param _from an address tokens were consumed from
   * @param _to an address tokens were sent to
   * @param _value number of tokens transferred
   */
  event Transfer(address indexed _from, address indexed _to, uint256 _value);
  /**
   * @dev Fired in approve() and approveAtomic() functions
   *
   * @dev ERC20 `event Approval(address indexed _owner, address indexed _spender, uint256 _value)`
   *
   * @param _owner an address which granted a permission to transfer
   *      tokens on its behalf
   * @param _spender an address which received a permission to transfer
   *      tokens on behalf of the owner `_owner`
   * @param _value amount of tokens granted to transfer on behalf
   */
  event Approval(address indexed _owner, address indexed _spender, uint256 _value);
  /**
   * @dev Fired in mint() function
   *
   * @param _by an address which minted some tokens (transaction sender)
   * @param _to an address the tokens were minted to
   * @param _value an amount of tokens minted
   */
  event Minted(address indexed _by, address indexed _to, uint256 _value);
  /**
   * @dev Fired in burn() function
   *
   * @param _by an address which burned some tokens (transaction sender)
   * @param _from an address the tokens were burnt from
   * @param _value an amount of tokens burnt
   */
  event Burnt(address indexed _by, address indexed _from, uint256 _value);
  /**
   * @dev Resolution for the Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9)
   *
   * @dev Similar to ERC20 Transfer event, but also logs an address which executed transfer
   *
   * @dev Fired in transfer(), transferFrom() and some other (non-ERC20) functions
   *
   * @param _by an address which performed the transfer
   * @param _from an address tokens were consumed from
   * @param _to an address tokens were sent to
   * @param _value number of tokens transferred
   */
  event Transferred(address indexed _by, address indexed _from, address indexed _to, uint256 _value);
  /**
   * @dev Resolution for the Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9)
   *
   * @dev Similar to ERC20 Approve event, but also logs old approval value
   *
   * @dev Fired in approve() and approveAtomic() functions
   *
   * @param _owner an address which granted a permission to transfer
   *      tokens on its behalf
   * @param _spender an address which received a permission to transfer
   *      tokens on behalf of the owner `_owner`
   * @param _oldValue previously granted amount of tokens to transfer on behalf
   * @param _value new granted amount of tokens to transfer on behalf
   */
  event Approved(address indexed _owner, address indexed _spender, uint256 _oldValue, uint256 _value);
  /**
   * @dev Notifies that a key-value pair in `votingDelegates` mapping has changed,
   *      i.e. a delegator address has changed its delegate address
   *
   * @param _of delegator address, a token owner
   * @param _from old delegate, an address which delegate right is revoked
   * @param _to new delegate, an address which received the voting power
   */
  event DelegateChanged(address indexed _of, address indexed _from, address indexed _to);
  /**
   * @dev Notifies that a key-value pair in `votingPowerHistory` mapping has changed,
   *      i.e. a delegate's voting power has changed.
   *
   * @param _of delegate whose voting power has changed
   * @param _fromVal previous number of votes delegate had
   * @param _toVal new number of votes delegate has
   */
  event VotingPowerChanged(address indexed _of, uint256 _fromVal, uint256 _toVal);
  /**
   * @dev Deploys the token smart contract,
   *      assigns initial token supply to the address specified
   *
   * @param _initialHolder owner of the initial token supply
   */
  constructor(address _initialHolder) {
    // verify initial holder address non-zero (is set)
    require(_initialHolder != address(0), "_initialHolder not set (zero address)");
    // mint initial supply
    mint(_initialHolder, 7_000_000e18);
  }
  // ===== Start: ERC20/ERC223/ERC777 functions =====
  /**
   * @notice Gets the balance of a particular address
   *
   * @dev ERC20 `function balanceOf(address _owner) public view returns (uint256 balance)`
   *
   * @param _owner the address to query the the balance for
   * @return balance an amount of tokens owned by the address specified
   */
  function balanceOf(address _owner) public view returns (uint256 balance) {
    // read the balance and return
    return tokenBalances[_owner];
  }
  /**
   * @notice Transfers some tokens to an external address or a smart contract
   *
   * @dev ERC20 `function transfer(address _to, uint256 _value) public returns (bool success)`
   *
   * @dev Called by token owner (an address which has a
   *      positive token balance tracked by this smart contract)
   * @dev Throws on any error like
   *      * insufficient token balance or
   *      * incorrect `_to` address:
   *          * zero address or
   *          * self address or
   *          * smart contract which doesn't support ERC20
   *
   * @param _to an address to transfer tokens to,
   *      must be either an external address or a smart contract,
   *      compliant with the ERC20 standard
   * @param _value amount of tokens to be transferred, must
   *      be greater than zero
   * @return success true on success, throws otherwise
   */
  function transfer(address _to, uint256 _value) public returns (bool success) {
    // just delegate call to `transferFrom`,
    // `FEATURE_TRANSFERS` is verified inside it
    return transferFrom(msg.sender, _to, _value);
  }
  /**
   * @notice Transfers some tokens on behalf of address `_from' (token owner)
   *      to some other address `_to`
   *
   * @dev ERC20 `function transferFrom(address _from, address _to, uint256 _value) public returns (bool success)`
   *
   * @dev Called by token owner on his own or approved address,
   *      an address approved earlier by token owner to
   *      transfer some amount of tokens on its behalf
   * @dev Throws on any error like
   *      * insufficient token balance or
   *      * incorrect `_to` address:
   *          * zero address or
   *          * same as `_from` address (self transfer)
   *          * smart contract which doesn't support ERC20
   *
   * @param _from token owner which approved caller (transaction sender)
   *      to transfer `_value` of tokens on its behalf
   * @param _to an address to transfer tokens to,
   *      must be either an external address or a smart contract,
   *      compliant with the ERC20 standard
   * @param _value amount of tokens to be transferred, must
   *      be greater than zero
   * @return success true on success, throws otherwise
   */
  function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
    // depending on `FEATURE_UNSAFE_TRANSFERS` we execute either safe (default)
    // or unsafe transfer
    // if `FEATURE_UNSAFE_TRANSFERS` is enabled
    // or receiver has `ROLE_ERC20_RECEIVER` permission
    // or sender has `ROLE_ERC20_SENDER` permission
    if(isFeatureEnabled(FEATURE_UNSAFE_TRANSFERS)
      || isOperatorInRole(_to, ROLE_ERC20_RECEIVER)
      || isSenderInRole(ROLE_ERC20_SENDER)) {
      // we execute unsafe transfer - delegate call to `unsafeTransferFrom`,
      // `FEATURE_TRANSFERS` is verified inside it
      unsafeTransferFrom(_from, _to, _value);
    }
    // otherwise - if `FEATURE_UNSAFE_TRANSFERS` is disabled
    // and receiver doesn't have `ROLE_ERC20_RECEIVER` permission
    else {
      // we execute safe transfer - delegate call to `safeTransferFrom`, passing empty `_data`,
      // `FEATURE_TRANSFERS` is verified inside it
      safeTransferFrom(_from, _to, _value, "");
    }
    // both `unsafeTransferFrom` and `safeTransferFrom` throw on any error, so
    // if we're here - it means operation successful,
    // just return true
    return true;
  }
  /**
   * @notice Transfers some tokens on behalf of address `_from' (token owner)
   *      to some other address `_to`
   *
   * @dev Inspired by ERC721 safeTransferFrom, this function allows to
   *      send arbitrary data to the receiver on successful token transfer
   * @dev Called by token owner on his own or approved address,
   *      an address approved earlier by token owner to
   *      transfer some amount of tokens on its behalf
   * @dev Throws on any error like
   *      * insufficient token balance or
   *      * incorrect `_to` address:
   *          * zero address or
   *          * same as `_from` address (self transfer)
   *          * smart contract which doesn't support ERC20Receiver interface
   * @dev Returns silently on success, throws otherwise
   *
   * @param _from token owner which approved caller (transaction sender)
   *      to transfer `_value` of tokens on its behalf
   * @param _to an address to transfer tokens to,
   *      must be either an external address or a smart contract,
   *      compliant with the ERC20 standard
   * @param _value amount of tokens to be transferred, must
   *      be greater than zero
   * @param _data [optional] additional data with no specified format,
   *      sent in onERC20Received call to `_to` in case if its a smart contract
   */
  function safeTransferFrom(address _from, address _to, uint256 _value, bytes memory _data) public {
    // first delegate call to `unsafeTransferFrom`
    // to perform the unsafe token(s) transfer
    unsafeTransferFrom(_from, _to, _value);
    // after the successful transfer - check if receiver supports
    // ERC20Receiver and execute a callback handler `onERC20Received`,
    // reverting whole transaction on any error:
    // check if receiver `_to` supports ERC20Receiver interface
    if(AddressUtils.isContract(_to)) {
      // if `_to` is a contract - execute onERC20Received
      bytes4 response = ERC20Receiver(_to).onERC20Received(msg.sender, _from, _value, _data);
      // expected response is ERC20_RECEIVED
      require(response == ERC20_RECEIVED, "invalid onERC20Received response");
    }
  }
  /**
   * @notice Transfers some tokens on behalf of address `_from' (token owner)
   *      to some other address `_to`
   *
   * @dev In contrast to `safeTransferFrom` doesn't check recipient
   *      smart contract to support ERC20 tokens (ERC20Receiver)
   * @dev Designed to be used by developers when the receiver is known
   *      to support ERC20 tokens but doesn't implement ERC20Receiver interface
   * @dev Called by token owner on his own or approved address,
   *      an address approved earlier by token owner to
   *      transfer some amount of tokens on its behalf
   * @dev Throws on any error like
   *      * insufficient token balance or
   *      * incorrect `_to` address:
   *          * zero address or
   *          * same as `_from` address (self transfer)
   * @dev Returns silently on success, throws otherwise
   *
   * @param _from token owner which approved caller (transaction sender)
   *      to transfer `_value` of tokens on its behalf
   * @param _to an address to transfer tokens to,
   *      must be either an external address or a smart contract,
   *      compliant with the ERC20 standard
   * @param _value amount of tokens to be transferred, must
   *      be greater than zero
   */
  function unsafeTransferFrom(address _from, address _to, uint256 _value) public {
    // if `_from` is equal to sender, require transfers feature to be enabled
    // otherwise require transfers on behalf feature to be enabled
    require(_from == msg.sender && isFeatureEnabled(FEATURE_TRANSFERS)
         || _from != msg.sender && isFeatureEnabled(FEATURE_TRANSFERS_ON_BEHALF),
            _from == msg.sender? "transfers are disabled": "transfers on behalf are disabled");
    // non-zero source address check - Zeppelin
    // obviously, zero source address is a client mistake
    // it's not part of ERC20 standard but it's reasonable to fail fast
    // since for zero value transfer transaction succeeds otherwise
    require(_from != address(0), "ERC20: transfer from the zero address"); // Zeppelin msg
    // non-zero recipient address check
    require(_to != address(0), "ERC20: transfer to the zero address"); // Zeppelin msg
    // sender and recipient cannot be the same
    require(_from != _to, "sender and recipient are the same (_from = _to)");
    // sending tokens to the token smart contract itself is a client mistake
    require(_to != address(this), "invalid recipient (transfer to the token smart contract itself)");
    // according to ERC-20 Token Standard, https://eips.ethereum.org/EIPS/eip-20
    // "Transfers of 0 values MUST be treated as normal transfers and fire the Transfer event."
    if(_value == 0) {
      // emit an ERC20 transfer event
      emit Transfer(_from, _to, _value);
      // don't forget to return - we're done
      return;
    }
    // no need to make arithmetic overflow check on the _value - by design of mint()
    // in case of transfer on behalf
    if(_from != msg.sender) {
      // read allowance value - the amount of tokens allowed to transfer - into the stack
      uint256 _allowance = transferAllowances[_from][msg.sender];
      // verify sender has an allowance to transfer amount of tokens requested
      require(_allowance >= _value, "ERC20: transfer amount exceeds allowance"); // Zeppelin msg
      // update allowance value on the stack
      _allowance -= _value;
      // update the allowance value in storage
      transferAllowances[_from][msg.sender] = _allowance;
      // emit an improved atomic approve event
      emit Approved(_from, msg.sender, _allowance + _value, _allowance);
      // emit an ERC20 approval event to reflect the decrease
      emit Approval(_from, msg.sender, _allowance);
    }
    // verify sender has enough tokens to transfer on behalf
    require(tokenBalances[_from] >= _value, "ERC20: transfer amount exceeds balance"); // Zeppelin msg
    // perform the transfer:
    // decrease token owner (sender) balance
    tokenBalances[_from] -= _value;
    // increase `_to` address (receiver) balance
    tokenBalances[_to] += _value;
    // move voting power associated with the tokens transferred
    __moveVotingPower(votingDelegates[_from], votingDelegates[_to], _value);
    // emit an improved transfer event
    emit Transferred(msg.sender, _from, _to, _value);
    // emit an ERC20 transfer event
    emit Transfer(_from, _to, _value);
  }
  /**
   * @notice Approves address called `_spender` to transfer some amount
   *      of tokens on behalf of the owner
   *
   * @dev ERC20 `function approve(address _spender, uint256 _value) public returns (bool success)`
   *
   * @dev Caller must not necessarily own any tokens to grant the permission
   *
   * @param _spender an address approved by the caller (token owner)
   *      to spend some tokens on its behalf
   * @param _value an amount of tokens spender `_spender` is allowed to
   *      transfer on behalf of the token owner
   * @return success true on success, throws otherwise
   */
  function approve(address _spender, uint256 _value) public returns (bool success) {
    // non-zero spender address check - Zeppelin
    // obviously, zero spender address is a client mistake
    // it's not part of ERC20 standard but it's reasonable to fail fast
    require(_spender != address(0), "ERC20: approve to the zero address"); // Zeppelin msg
    // read old approval value to emmit an improved event (ISBN:978-1-7281-3027-9)
    uint256 _oldValue = transferAllowances[msg.sender][_spender];
    // perform an operation: write value requested into the storage
    transferAllowances[msg.sender][_spender] = _value;
    // emit an improved atomic approve event (ISBN:978-1-7281-3027-9)
    emit Approved(msg.sender, _spender, _oldValue, _value);
    // emit an ERC20 approval event
    emit Approval(msg.sender, _spender, _value);
    // operation successful, return true
    return true;
  }
  /**
   * @notice Returns the amount which _spender is still allowed to withdraw from _owner.
   *
   * @dev ERC20 `function allowance(address _owner, address _spender) public view returns (uint256 remaining)`
   *
   * @dev A function to check an amount of tokens owner approved
   *      to transfer on its behalf by some other address called "spender"
   *
   * @param _owner an address which approves transferring some tokens on its behalf
   * @param _spender an address approved to transfer some tokens on behalf
   * @return remaining an amount of tokens approved address `_spender` can transfer on behalf
   *      of token owner `_owner`
   */
  function allowance(address _owner, address _spender) public view returns (uint256 remaining) {
    // read the value from storage and return
    return transferAllowances[_owner][_spender];
  }
  // ===== End: ERC20/ERC223/ERC777 functions =====
  // ===== Start: Resolution for the Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9) =====
  /**
   * @notice Increases the allowance granted to `spender` by the transaction sender
   *
   * @dev Resolution for the Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9)
   *
   * @dev Throws if value to increase by is zero or too big and causes arithmetic overflow
   *
   * @param _spender an address approved by the caller (token owner)
   *      to spend some tokens on its behalf
   * @param _value an amount of tokens to increase by
   * @return success true on success, throws otherwise
   */
  function increaseAllowance(address _spender, uint256 _value) public virtual returns (bool) {
    // read current allowance value
    uint256 currentVal = transferAllowances[msg.sender][_spender];
    // non-zero _value and arithmetic overflow check on the allowance
    require(currentVal + _value > currentVal, "zero value approval increase or arithmetic overflow");
    // delegate call to `approve` with the new value
    return approve(_spender, currentVal + _value);
  }
  /**
   * @notice Decreases the allowance granted to `spender` by the caller.
   *
   * @dev Resolution for the Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9)
   *
   * @dev Throws if value to decrease by is zero or is bigger than currently allowed value
   *
   * @param _spender an address approved by the caller (token owner)
   *      to spend some tokens on its behalf
   * @param _value an amount of tokens to decrease by
   * @return success true on success, throws otherwise
   */
  function decreaseAllowance(address _spender, uint256 _value) public virtual returns (bool) {
    // read current allowance value
    uint256 currentVal = transferAllowances[msg.sender][_spender];
    // non-zero _value check on the allowance
    require(_value > 0, "zero value approval decrease");
    // verify allowance decrease doesn't underflow
    require(currentVal >= _value, "ERC20: decreased allowance below zero");
    // delegate call to `approve` with the new value
    return approve(_spender, currentVal - _value);
  }
  // ===== End: Resolution for the Multiple Withdrawal Attack on ERC20 Tokens (ISBN:978-1-7281-3027-9) =====
  // ===== Start: Minting/burning extension =====
  /**
   * @dev Mints (creates) some tokens to address specified
   * @dev The value specified is treated as is without taking
   *      into account what `decimals` value is
   * @dev Behaves effectively as `mintTo` function, allowing
   *      to specify an address to mint tokens to
   * @dev Requires sender to have `ROLE_TOKEN_CREATOR` permission
   *
   * @dev Throws on overflow, if totalSupply + _value doesn't fit into uint256
   *
   * @param _to an address to mint tokens to
   * @param _value an amount of tokens to mint (create)
   */
  function mint(address _to, uint256 _value) public {
    // check if caller has sufficient permissions to mint tokens
    require(isSenderInRole(ROLE_TOKEN_CREATOR), "insufficient privileges (ROLE_TOKEN_CREATOR required)");
    // non-zero recipient address check
    require(_to != address(0), "ERC20: mint to the zero address"); // Zeppelin msg
    // non-zero _value and arithmetic overflow check on the total supply
    // this check automatically secures arithmetic overflow on the individual balance
    require(totalSupply + _value > totalSupply, "zero value mint or arithmetic overflow");
    // uint192 overflow check (required by voting delegation)
    require(totalSupply + _value <= type(uint192).max, "total supply overflow (uint192)");
    // perform mint:
    // increase total amount of tokens value
    totalSupply += _value;
    // increase `_to` address balance
    tokenBalances[_to] += _value;
    // create voting power associated with the tokens minted
    __moveVotingPower(address(0), votingDelegates[_to], _value);
    // fire a minted event
    emit Minted(msg.sender, _to, _value);
    // emit an improved transfer event
    emit Transferred(msg.sender, address(0), _to, _value);
    // fire ERC20 compliant transfer event
    emit Transfer(address(0), _to, _value);
  }
  /**
   * @dev Burns (destroys) some tokens from the address specified
   * @dev The value specified is treated as is without taking
   *      into account what `decimals` value is
   * @dev Behaves effectively as `burnFrom` function, allowing
   *      to specify an address to burn tokens from
   * @dev Requires sender to have `ROLE_TOKEN_DESTROYER` permission
   *
   * @param _from an address to burn some tokens from
   * @param _value an amount of tokens to burn (destroy)
   */
  function burn(address _from, uint256 _value) public {
    // check if caller has sufficient permissions to burn tokens
    // and if not - check for possibility to burn own tokens or to burn on behalf
    if(!isSenderInRole(ROLE_TOKEN_DESTROYER)) {
      // if `_from` is equal to sender, require own burns feature to be enabled
      // otherwise require burns on behalf feature to be enabled
      require(_from == msg.sender && isFeatureEnabled(FEATURE_OWN_BURNS)
           || _from != msg.sender && isFeatureEnabled(FEATURE_BURNS_ON_BEHALF),
              _from == msg.sender? "burns are disabled": "burns on behalf are disabled");
      // in case of burn on behalf
      if(_from != msg.sender) {
        // read allowance value - the amount of tokens allowed to be burnt - into the stack
        uint256 _allowance = transferAllowances[_from][msg.sender];
        // verify sender has an allowance to burn amount of tokens requested
        require(_allowance >= _value, "ERC20: burn amount exceeds allowance"); // Zeppelin msg
        // update allowance value on the stack
        _allowance -= _value;
        // update the allowance value in storage
        transferAllowances[_from][msg.sender] = _allowance;
        // emit an improved atomic approve event
        emit Approved(msg.sender, _from, _allowance + _value, _allowance);
        // emit an ERC20 approval event to reflect the decrease
        emit Approval(_from, msg.sender, _allowance);
      }
    }
    // at this point we know that either sender is ROLE_TOKEN_DESTROYER or
    // we burn own tokens or on behalf (in latest case we already checked and updated allowances)
    // we have left to execute balance checks and burning logic itself
    // non-zero burn value check
    require(_value != 0, "zero value burn");
    // non-zero source address check - Zeppelin
    require(_from != address(0), "ERC20: burn from the zero address"); // Zeppelin msg
    // verify `_from` address has enough tokens to destroy
    // (basically this is a arithmetic overflow check)
    require(tokenBalances[_from] >= _value, "ERC20: burn amount exceeds balance"); // Zeppelin msg
    // perform burn:
    // decrease `_from` address balance
    tokenBalances[_from] -= _value;
    // decrease total amount of tokens value
    totalSupply -= _value;
    // destroy voting power associated with the tokens burnt
    __moveVotingPower(votingDelegates[_from], address(0), _value);
    // fire a burnt event
    emit Burnt(msg.sender, _from, _value);
    // emit an improved transfer event
    emit Transferred(msg.sender, _from, address(0), _value);
    // fire ERC20 compliant transfer event
    emit Transfer(_from, address(0), _value);
  }
  // ===== End: Minting/burning extension =====
  // ===== Start: DAO Support (Compound-like voting delegation) =====
  /**
   * @notice Gets current voting power of the account `_of`
   * @param _of the address of account to get voting power of
   * @return current cumulative voting power of the account,
   *      sum of token balances of all its voting delegators
   */
  function getVotingPower(address _of) public view returns (uint256) {
    // get a link to an array of voting power history records for an address specified
    VotingPowerRecord[] storage history = votingPowerHistory[_of];
    // lookup the history and return latest element
    return history.length == 0? 0: history[history.length - 1].votingPower;
  }
  /**
   * @notice Gets past voting power of the account `_of` at some block `_blockNum`
   * @dev Throws if `_blockNum` is not in the past (not the finalized block)
   * @param _of the address of account to get voting power of
   * @param _blockNum block number to get the voting power at
   * @return past cumulative voting power of the account,
   *      sum of token balances of all its voting delegators at block number `_blockNum`
   */
  function getVotingPowerAt(address _of, uint256 _blockNum) public view returns (uint256) {
    // make sure block number is not in the past (not the finalized block)
    require(_blockNum < block.number, "not yet determined"); // Compound msg
    // get a link to an array of voting power history records for an address specified
    VotingPowerRecord[] storage history = votingPowerHistory[_of];
    // if voting power history for the account provided is empty
    if(history.length == 0) {
      // than voting power is zero - return the result
      return 0;
    }
    // check latest voting power history record block number:
    // if history was not updated after the block of interest
    if(history[history.length - 1].blockNumber <= _blockNum) {
      // we're done - return last voting power record
      return getVotingPower(_of);
    }
    // check first voting power history record block number:
    // if history was never updated before the block of interest
    if(history[0].blockNumber > _blockNum) {
      // we're done - voting power at the block num of interest was zero
      return 0;
    }
    // `votingPowerHistory[_of]` is an array ordered by `blockNumber`, ascending;
    // apply binary search on `votingPowerHistory[_of]` to find such an entry number `i`, that
    // `votingPowerHistory[_of][i].blockNumber <= _blockNum`, but in the same time
    // `votingPowerHistory[_of][i + 1].blockNumber > _blockNum`
    // return the result - voting power found at index `i`
    return history[__binaryLookup(_of, _blockNum)].votingPower;
  }
  /**
   * @dev Reads an entire voting power history array for the delegate specified
   *
   * @param _of delegate to query voting power history for
   * @return voting power history array for the delegate of interest
   */
  function getVotingPowerHistory(address _of) public view returns(VotingPowerRecord[] memory) {
    // return an entire array as memory
    return votingPowerHistory[_of];
  }
  /**
   * @dev Returns length of the voting power history array for the delegate specified;
   *      useful since reading an entire array just to get its length is expensive (gas cost)
   *
   * @param _of delegate to query voting power history length for
   * @return voting power history array length for the delegate of interest
   */
  function getVotingPowerHistoryLength(address _of) public view returns(uint256) {
    // read array length and return
    return votingPowerHistory[_of].length;
  }
  /**
   * @notice Delegates voting power of the delegator `msg.sender` to the delegate `_to`
   *
   * @dev Accepts zero value address to delegate voting power to, effectively
   *      removing the delegate in that case
   *
   * @param _to address to delegate voting power to
   */
  function delegate(address _to) public {
    // verify delegations are enabled
    require(isFeatureEnabled(FEATURE_DELEGATIONS), "delegations are disabled");
    // delegate call to `__delegate`
    __delegate(msg.sender, _to);
  }
  /**
   * @notice Delegates voting power of the delegator (represented by its signature) to the delegate `_to`
   *
   * @dev Accepts zero value address to delegate voting power to, effectively
   *      removing the delegate in that case
   *
   * @dev Compliant with EIP-712: Ethereum typed structured data hashing and signing,
   *      see https://eips.ethereum.org/EIPS/eip-712
   *
   * @param _to address to delegate voting power to
   * @param _nonce nonce used to construct the signature, and used to validate it;
   *      nonce is increased by one after successful signature validation and vote delegation
   * @param _exp signature expiration time
   * @param v the recovery byte of the signature
   * @param r half of the ECDSA signature pair
   * @param s half of the ECDSA signature pair
   */
  function delegateWithSig(address _to, uint256 _nonce, uint256 _exp, uint8 v, bytes32 r, bytes32 s) public {
    // verify delegations on behalf are enabled
    require(isFeatureEnabled(FEATURE_DELEGATIONS_ON_BEHALF), "delegations on behalf are disabled");
    // build the EIP-712 contract domain separator
    bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), block.chainid, address(this)));
    // build the EIP-712 hashStruct of the delegation message
    bytes32 hashStruct = keccak256(abi.encode(DELEGATION_TYPEHASH, _to, _nonce, _exp));
    // calculate the EIP-712 digest "\\x19\\x01" ‖ domainSeparator ‖ hashStruct(message)
    bytes32 digest = keccak256(abi.encodePacked("\\x19\\x01", domainSeparator, hashStruct));
    // recover the address who signed the message with v, r, s
    address signer = ecrecover(digest, v, r, s);
    // perform message integrity and security validations
    require(signer != address(0), "invalid signature"); // Compound msg
    require(_nonce == nonces[signer], "invalid nonce"); // Compound msg
    require(block.timestamp < _exp, "signature expired"); // Compound msg
    // update the nonce for that particular signer to avoid replay attack
    nonces[signer]++;
    // delegate call to `__delegate` - execute the logic required
    __delegate(signer, _to);
  }
  /**
   * @dev Auxiliary function to delegate delegator's `_from` voting power to the delegate `_to`
   * @dev Writes to `votingDelegates` and `votingPowerHistory` mappings
   *
   * @param _from delegator who delegates his voting power
   * @param _to delegate who receives the voting power
   */
  function __delegate(address _from, address _to) private {
    // read current delegate to be replaced by a new one
    address _fromDelegate = votingDelegates[_from];
    // read current voting power (it is equal to token balance)
    uint256 _value = tokenBalances[_from];
    // reassign voting delegate to `_to`
    votingDelegates[_from] = _to;
    // update voting power for `_fromDelegate` and `_to`
    __moveVotingPower(_fromDelegate, _to, _value);
    // emit an event
    emit DelegateChanged(_from, _fromDelegate, _to);
  }
  /**
   * @dev Auxiliary function to move voting power `_value`
   *      from delegate `_from` to the delegate `_to`
   *
   * @dev Doesn't have any effect if `_from == _to`, or if `_value == 0`
   *
   * @param _from delegate to move voting power from
   * @param _to delegate to move voting power to
   * @param _value voting power to move from `_from` to `_to`
   */
  function __moveVotingPower(address _from, address _to, uint256 _value) private {
    // if there is no move (`_from == _to`) or there is nothing to move (`_value == 0`)
    if(_from == _to || _value == 0) {
      // return silently with no action
      return;
    }
    // if source address is not zero - decrease its voting power
    if(_from != address(0)) {
      // read current source address voting power
      uint256 _fromVal = getVotingPower(_from);
      // calculate decreased voting power
      // underflow is not possible by design:
      // voting power is limited by token balance which is checked by the callee
      uint256 _toVal = _fromVal - _value;
      // update source voting power from `_fromVal` to `_toVal`
      __updateVotingPower(_from, _fromVal, _toVal);
    }
    // if destination address is not zero - increase its voting power
    if(_to != address(0)) {
      // read current destination address voting power
      uint256 _fromVal = getVotingPower(_to);
      // calculate increased voting power
      // overflow is not possible by design:
      // max token supply limits the cumulative voting power
      uint256 _toVal = _fromVal + _value;
      // update destination voting power from `_fromVal` to `_toVal`
      __updateVotingPower(_to, _fromVal, _toVal);
    }
  }
  /**
   * @dev Auxiliary function to update voting power of the delegate `_of`
   *      from value `_fromVal` to value `_toVal`
   *
   * @param _of delegate to update its voting power
   * @param _fromVal old voting power of the delegate
   * @param _toVal new voting power of the delegate
   */
  function __updateVotingPower(address _of, uint256 _fromVal, uint256 _toVal) private {
    // get a link to an array of voting power history records for an address specified
    VotingPowerRecord[] storage history = votingPowerHistory[_of];
    // if there is an existing voting power value stored for current block
    if(history.length != 0 && history[history.length - 1].blockNumber == block.number) {
      // update voting power which is already stored in the current block
      history[history.length - 1].votingPower = uint192(_toVal);
    }
    // otherwise - if there is no value stored for current block
    else {
      // add new element into array representing the value for current block
      history.push(VotingPowerRecord(uint64(block.number), uint192(_toVal)));
    }
    // emit an event
    emit VotingPowerChanged(_of, _fromVal, _toVal);
  }
  /**
   * @dev Auxiliary function to lookup an element in a sorted (asc) array of elements
   *
   * @dev This function finds the closest element in an array to the value
   *      of interest (not exceeding that value) and returns its index within an array
   *
   * @dev An array to search in is `votingPowerHistory[_to][i].blockNumber`,
   *      it is sorted in ascending order (blockNumber increases)
   *
   * @param _to an address of the delegate to get an array for
   * @param n value of interest to look for
   * @return an index of the closest element in an array to the value
   *      of interest (not exceeding that value)
   */
  function __binaryLookup(address _to, uint256 n) private view returns(uint256) {
    // get a link to an array of voting power history records for an address specified
    VotingPowerRecord[] storage history = votingPowerHistory[_to];
    // left bound of the search interval, originally start of the array
    uint256 i = 0;
    // right bound of the search interval, originally end of the array
    uint256 j = history.length - 1;
    // the iteration process narrows down the bounds by
    // splitting the interval in a half oce per each iteration
    while(j > i) {
      // get an index in the middle of the interval [i, j]
      uint256 k = j - (j - i) / 2;
      // read an element to compare it with the value of interest
      VotingPowerRecord memory cp = history[k];
      // if we've got a strict equal - we're lucky and done
      if(cp.blockNumber == n) {
        // just return the result - index `k`
        return k;
      }
      // if the value of interest is bigger - move left bound to the middle
      else if (cp.blockNumber < n) {
        // move left bound `i` to the middle position `k`
        i = k;
      }
      // otherwise, when the value of interest is smaller - move right bound to the middle
      else {
        // move right bound `j` to the middle position `k - 1`:
        // element at position `k` is bigger and cannot be the result
        j = k - 1;
      }
    }
    // reaching that point means no exact match found
    // since we're interested in the element which is not bigger than the
    // element of interest, we return the lower bound `i`
    return i;
  }
}
// ===== End: DAO Support (Compound-like voting delegation) =====
// SPDX-License-Identifier: MIT
pragma solidity 0.8.1;
/**
 * @title Access Control List
 *
 * @notice Access control smart contract provides an API to check
 *      if specific operation is permitted globally and/or
 *      if particular user has a permission to execute it.
 *
 * @notice It deals with two main entities: features and roles.
 *
 * @notice Features are designed to be used to enable/disable specific
 *      functions (public functions) of the smart contract for everyone.
 * @notice User roles are designed to restrict access to specific
 *      functions (restricted functions) of the smart contract to some users.
 *
 * @notice Terms "role", "permissions" and "set of permissions" have equal meaning
 *      in the documentation text and may be used interchangeably.
 * @notice Terms "permission", "single permission" implies only one permission bit set.
 *
 * @dev This smart contract is designed to be inherited by other
 *      smart contracts which require access control management capabilities.
 *
 * @author Basil Gorin
 */
contract AccessControl {
  /**
   * @notice Access manager is responsible for assigning the roles to users,
   *      enabling/disabling global features of the smart contract
   * @notice Access manager can add, remove and update user roles,
   *      remove and update global features
   *
   * @dev Role ROLE_ACCESS_MANAGER allows modifying user roles and global features
   * @dev Role ROLE_ACCESS_MANAGER has single bit at position 255 enabled
   */
  uint256 public constant ROLE_ACCESS_MANAGER = 0x8000000000000000000000000000000000000000000000000000000000000000;
  /**
   * @dev Bitmask representing all the possible permissions (super admin role)
   * @dev Has all the bits are enabled (2^256 - 1 value)
   */
  uint256 private constant FULL_PRIVILEGES_MASK = type(uint256).max; // before 0.8.0: uint256(-1) overflows to 0xFFFF...
  /**
   * @notice Privileged addresses with defined roles/permissions
   * @notice In the context of ERC20/ERC721 tokens these can be permissions to
   *      allow minting or burning tokens, transferring on behalf and so on
   *
   * @dev Maps user address to the permissions bitmask (role), where each bit
   *      represents a permission
   * @dev Bitmask 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
   *      represents all possible permissions
   * @dev Zero address mapping represents global features of the smart contract
   */
  mapping(address => uint256) public userRoles;
  /**
   * @dev Fired in updateRole() and updateFeatures()
   *
   * @param _by operator which called the function
   * @param _to address which was granted/revoked permissions
   * @param _requested permissions requested
   * @param _actual permissions effectively set
   */
  event RoleUpdated(address indexed _by, address indexed _to, uint256 _requested, uint256 _actual);
  /**
   * @notice Creates an access control instance,
   *      setting contract creator to have full privileges
   */
  constructor() {
    // contract creator has full privileges
    userRoles[msg.sender] = FULL_PRIVILEGES_MASK;
  }
  /**
   * @notice Retrieves globally set of features enabled
   *
   * @dev Auxiliary getter function to maintain compatibility with previous
   *      versions of the Access Control List smart contract, where
   *      features was a separate uint256 public field
   *
   * @return 256-bit bitmask of the features enabled
   */
  function features() public view returns(uint256) {
    // according to new design features are stored in zero address
    // mapping of `userRoles` structure
    return userRoles[address(0)];
  }
  /**
   * @notice Updates set of the globally enabled features (`features`),
   *      taking into account sender's permissions
   *
   * @dev Requires transaction sender to have `ROLE_ACCESS_MANAGER` permission
   * @dev Function is left for backward compatibility with older versions
   *
   * @param _mask bitmask representing a set of features to enable/disable
   */
  function updateFeatures(uint256 _mask) public {
    // delegate call to `updateRole`
    updateRole(address(0), _mask);
  }
  /**
   * @notice Updates set of permissions (role) for a given user,
   *      taking into account sender's permissions.
   *
   * @dev Setting role to zero is equivalent to removing an all permissions
   * @dev Setting role to `FULL_PRIVILEGES_MASK` is equivalent to
   *      copying senders' permissions (role) to the user
   * @dev Requires transaction sender to have `ROLE_ACCESS_MANAGER` permission
   *
   * @param operator address of a user to alter permissions for or zero
   *      to alter global features of the smart contract
   * @param role bitmask representing a set of permissions to
   *      enable/disable for a user specified
   */
  function updateRole(address operator, uint256 role) public {
    // caller must have a permission to update user roles
    require(isSenderInRole(ROLE_ACCESS_MANAGER), "insufficient privileges (ROLE_ACCESS_MANAGER required)");
    // evaluate the role and reassign it
    userRoles[operator] = evaluateBy(msg.sender, userRoles[operator], role);
    // fire an event
    emit RoleUpdated(msg.sender, operator, role, userRoles[operator]);
  }
  /**
   * @notice Determines the permission bitmask an operator can set on the
   *      target permission set
   * @notice Used to calculate the permission bitmask to be set when requested
   *     in `updateRole` and `updateFeatures` functions
   *
   * @dev Calculated based on:
   *      1) operator's own permission set read from userRoles[operator]
   *      2) target permission set - what is already set on the target
   *      3) desired permission set - what do we want set target to
   *
   * @dev Corner cases:
   *      1) Operator is super admin and its permission set is `FULL_PRIVILEGES_MASK`:
   *        `desired` bitset is returned regardless of the `target` permission set value
   *        (what operator sets is what they get)
   *      2) Operator with no permissions (zero bitset):
   *        `target` bitset is returned regardless of the `desired` value
   *        (operator has no authority and cannot modify anything)
   *
   * @dev Example:
   *      Consider an operator with the permissions bitmask     00001111
   *      is about to modify the target permission set          01010101
   *      Operator wants to set that permission set to          00110011
   *      Based on their role, an operator has the permissions
   *      to update only lowest 4 bits on the target, meaning that
   *      high 4 bits of the target set in this example is left
   *      unchanged and low 4 bits get changed as desired:      01010011
   *
   * @param operator address of the contract operator which is about to set the permissions
   * @param target input set of permissions to operator is going to modify
   * @param desired desired set of permissions operator would like to set
   * @return resulting set of permissions given operator will set
   */
  function evaluateBy(address operator, uint256 target, uint256 desired) public view returns(uint256) {
    // read operator's permissions
    uint256 p = userRoles[operator];
    // taking into account operator's permissions,
    // 1) enable the permissions desired on the `target`
    target |= p & desired;
    // 2) disable the permissions desired on the `target`
    target &= FULL_PRIVILEGES_MASK ^ (p & (FULL_PRIVILEGES_MASK ^ desired));
    // return calculated result
    return target;
  }
  /**
   * @notice Checks if requested set of features is enabled globally on the contract
   *
   * @param required set of features to check against
   * @return true if all the features requested are enabled, false otherwise
   */
  function isFeatureEnabled(uint256 required) public view returns(bool) {
    // delegate call to `__hasRole`, passing `features` property
    return __hasRole(features(), required);
  }
  /**
   * @notice Checks if transaction sender `msg.sender` has all the permissions required
   *
   * @param required set of permissions (role) to check against
   * @return true if all the permissions requested are enabled, false otherwise
   */
  function isSenderInRole(uint256 required) public view returns(bool) {
    // delegate call to `isOperatorInRole`, passing transaction sender
    return isOperatorInRole(msg.sender, required);
  }
  /**
   * @notice Checks if operator has all the permissions (role) required
   *
   * @param operator address of the user to check role for
   * @param required set of permissions (role) to check
   * @return true if all the permissions requested are enabled, false otherwise
   */
  function isOperatorInRole(address operator, uint256 required) public view returns(bool) {
    // delegate call to `__hasRole`, passing operator's permissions (role)
    return __hasRole(userRoles[operator], required);
  }
  /**
   * @dev Checks if role `actual` contains all the permissions required `required`
   *
   * @param actual existent role
   * @param required required role
   * @return true if actual has required role (all permissions), false otherwise
   */
  function __hasRole(uint256 actual, uint256 required) internal pure returns(bool) {
    // check the bitmask for the role required and return the result
    return actual & required == required;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.1;
/**
 * @title Address Utils
 *
 * @dev Utility library of inline functions on addresses
 *
 * @author Basil Gorin
 */
library AddressUtils {
  /**
   * @notice Checks if the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   *      as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    // a variable to load `extcodesize` to
    uint256 size = 0;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603 for more details about how this works.
    // TODO: Check this again before the Serenity release, because all addresses will be contracts.
    // solium-disable-next-line security/no-inline-assembly
    assembly {
      // retrieve the size of the code at address `addr`
      size := extcodesize(addr)
    }
    // positive size indicates a smart contract address
    return size > 0;
  }
}