// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;


/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library MathUtil {
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
}

contract ReentrancyGuard {
    uint256 private _guardCounter;

    constructor () internal {
        _guardCounter = 1;
    }

    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

interface ICurveGauge {
    function deposit(uint256) external;
    function balanceOf(address) external view returns (uint256);
    function withdraw(uint256) external;
    function claim_rewards() external;
    function reward_tokens(uint256) external view returns(address);//v2
    function rewarded_token() external view returns(address);//v1
}

interface ICurveVoteEscrow {
    function create_lock(uint256, uint256) external;
    function increase_amount(uint256) external;
    function increase_unlock_time(uint256) external;
    function withdraw() external;
    function smart_wallet_checker() external view returns (address);
}

interface IWalletChecker {
    function check(address) external view returns (bool);
}

interface IVoting{
    function vote(uint256, bool, bool) external; //voteId, support, executeIfDecided
    function getVote(uint256) external view returns(bool,bool,uint64,uint64,uint64,uint64,uint256,uint256,uint256,bytes memory); 
    function vote_for_gauge_weights(address,uint256) external;
}

interface IMinter{
    function mint(address) external;
}

interface IRegistry{
    function get_registry() external view returns(address);
    function get_address(uint256 _id) external view returns(address);
    function gauge_controller() external view returns(address);
    function get_lp_token(address) external view returns(address);
    function get_gauges(address) external view returns(address[10] memory,uint128[10] memory);
}

interface IStaker{
    function deposit(address, address) external;
    function withdraw(address) external;
    function withdraw(address, address, uint256) external;
    function withdrawAll(address, address) external;
    function createLock(uint256, uint256) external;
    function increaseAmount(uint256) external;
    function increaseTime(uint256) external;
    function release() external;
    function claimCrv(address) external returns (uint256);
    function claimRewards(address) external;
    function claimFees(address,address) external;
    function setStashAccess(address, bool) external;
    function vote(uint256,address,bool) external;
    function voteGaugeWeight(address,uint256) external;
    function balanceOfPool(address) external view returns (uint256);
    function operator() external view returns (address);
    function execute(address _to, uint256 _value, bytes calldata _data) external returns (bool, bytes memory);
}

interface IRewards{
    function stake(address, uint256) external;
    function stakeFor(address, uint256) external;
    function withdraw(address, uint256) external;
    function exit(address) external;
    function getReward(address) external;
    function queueNewRewards(uint256) external;
    function notifyRewardAmount(uint256) external;
    function addExtraReward(address) external;
    function stakingToken() external returns (address);
}

interface IStash{
    function stashRewards() external returns (bool);
    function processStash() external returns (bool);
    function claimRewards() external returns (bool);
}

interface IFeeDistro{
    function claim() external;
    function token() external view returns(address);
}

interface ITokenMinter{
    function mint(address,uint256) external;
    function burn(address,uint256) external;
}

interface IDeposit{
    function isShutdown() external view returns(bool);
    function balanceOf(address _account) external view returns(uint256);
    function totalSupply() external view returns(uint256);
    function poolInfo(uint256) external view returns(address,address,address,address,address, bool);
    function rewardClaimed(uint256,address,uint256) external;
    function withdrawTo(uint256,uint256,address) external;
    function claimRewards(uint256,address) external returns(bool);
    function rewardArbitrator() external returns(address);
}

interface ICrvDeposit{
    function deposit(uint256, bool) external;
    function lockIncentive() external view returns(uint256);
}

interface IRewardFactory{
    function setAccess(address,bool) external;
    function CreateCrvRewards(uint256,address) external returns(address);
    function CreateTokenRewards(address,address,address) external returns(address);
    function activeRewardCount(address) external view returns(uint256);
    function addActiveReward(address,uint256) external returns(bool);
    function removeActiveReward(address,uint256) external returns(bool);
}

interface IStashFactory{
    function CreateStash(uint256,address,address,uint256) external returns(address);
}

interface ITokenFactory{
    function CreateDepositToken(address) external returns(address);
}

interface IPools{
    function addPool(address _lptoken, address _gauge, uint256 _stashVersion) external returns(bool);
    function shutdownPool(uint256 _pid) external returns(bool);
    function poolInfo(uint256) external view returns(address,address,address,address,address,bool);
    function poolLength() external view returns (uint256);
    function gaugeMap(address) external view returns(bool);
    function setPoolManager(address _poolM) external;
}

interface IVestedEscrow{
    function fund(address[] calldata _recipient, uint256[] calldata _amount) external returns(bool);
}

// File: @openzeppelin\contracts\math\SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin\contracts\token\ERC20\IERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin\contracts\utils\Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin\contracts\token\ERC20\SafeERC20.sol

pragma solidity >=0.6.0 <0.8.0;


/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: contracts\BaseRewardPool.sol

pragma solidity 0.6.12;
/**
 *Submitted for verification at Etherscan.io on 2020-07-17
 */

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: BaseRewardPool.sol
*
* Docs: https://docs.synthetix.io/
*
*
* MIT License
* ===========
*
* Copyright (c) 2020 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/


contract BaseRewardPool {
     using SafeMath for uint256;
    using SafeERC20 for IERC20;

    IERC20 public rewardToken;
    IERC20 public stakingToken;
    uint256 public constant duration = 7 days;

    address public operator;
    address public rewardManager;

    uint256 public pid;
    uint256 public periodFinish = 0;
    uint256 public rewardRate = 0;
    uint256 public lastUpdateTime;
    uint256 public rewardPerTokenStored;
    uint256 public queuedRewards = 0;
    uint256 public currentRewards = 0;
    uint256 public historicalRewards = 0;
    uint256 public constant newRewardRatio = 830;
    uint256 private _totalSupply;
    mapping(address => uint256) public userRewardPerTokenPaid;
    mapping(address => uint256) public rewards;
    mapping(address => uint256) private _balances;

    address[] public extraRewards;

    event RewardAdded(uint256 reward);
    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
    event RewardPaid(address indexed user, uint256 reward);

    constructor(
        uint256 pid_,
        address stakingToken_,
        address rewardToken_,
        address operator_,
        address rewardManager_
    ) public {
        pid = pid_;
        stakingToken = IERC20(stakingToken_);
        rewardToken = IERC20(rewardToken_);
        operator = operator_;
        rewardManager = rewardManager_;
    }

    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    function extraRewardsLength() external view returns (uint256) {
        return extraRewards.length;
    }

    function addExtraReward(address _reward) external returns(bool){
        require(msg.sender == rewardManager, "!authorized");
        require(_reward != address(0),"!reward setting");

        extraRewards.push(_reward);
        return true;
    }
    function clearExtraRewards() external{
        require(msg.sender == rewardManager, "!authorized");
        delete extraRewards;
    }

    modifier updateReward(address account) {
        rewardPerTokenStored = rewardPerToken();
        lastUpdateTime = lastTimeRewardApplicable();
        if (account != address(0)) {
            rewards[account] = earned(account);
            userRewardPerTokenPaid[account] = rewardPerTokenStored;
        }
        _;
    }

    function lastTimeRewardApplicable() public view returns (uint256) {
        return MathUtil.min(block.timestamp, periodFinish);
    }

    function rewardPerToken() public view returns (uint256) {
        if (totalSupply() == 0) {
            return rewardPerTokenStored;
        }
        return
            rewardPerTokenStored.add(
                lastTimeRewardApplicable()
                    .sub(lastUpdateTime)
                    .mul(rewardRate)
                    .mul(1e18)
                    .div(totalSupply())
            );
    }

    function earned(address account) public view returns (uint256) {
        return
            balanceOf(account)
                .mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
                .div(1e18)
                .add(rewards[account]);
    }

    function stake(uint256 _amount)
        public
        updateReward(msg.sender)
        returns(bool)
    {
        require(_amount > 0, 'RewardPool : Cannot stake 0');
        
        //also stake to linked rewards
        for(uint i=0; i < extraRewards.length; i++){
            IRewards(extraRewards[i]).stake(msg.sender, _amount);
        }

        _totalSupply = _totalSupply.add(_amount);
        _balances[msg.sender] = _balances[msg.sender].add(_amount);

        stakingToken.safeTransferFrom(msg.sender, address(this), _amount);
        emit Staked(msg.sender, _amount);

        
        return true;
    }

    function stakeAll() external returns(bool){
        uint256 balance = stakingToken.balanceOf(msg.sender);
        stake(balance);
        return true;
    }

    function stakeFor(address _for, uint256 _amount)
        public
        updateReward(_for)
        returns(bool)
    {
        require(_amount > 0, 'RewardPool : Cannot stake 0');
        
        //also stake to linked rewards
        for(uint i=0; i < extraRewards.length; i++){
            IRewards(extraRewards[i]).stake(_for, _amount);
        }

        //give to _for
        _totalSupply = _totalSupply.add(_amount);
        _balances[_for] = _balances[_for].add(_amount);

        //take away from sender
        stakingToken.safeTransferFrom(msg.sender, address(this), _amount);
        emit Staked(_for, _amount);
        
        return true;
    }


    function withdraw(uint256 amount, bool claim)
        public
        updateReward(msg.sender)
        returns(bool)
    {
        require(amount > 0, 'RewardPool : Cannot withdraw 0');

        //also withdraw from linked rewards
        for(uint i=0; i < extraRewards.length; i++){
            IRewards(extraRewards[i]).withdraw(msg.sender, amount);
        }

        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);

        stakingToken.safeTransfer(msg.sender, amount);
        emit Withdrawn(msg.sender, amount);
     
        if(claim){
            getReward(msg.sender,true);
        }

        return true;
    }

    function withdrawAll(bool claim) external{
        withdraw(_balances[msg.sender],claim);
    }

    function withdrawAndUnwrap(uint256 amount, bool claim) public updateReward(msg.sender) returns(bool){

        //also withdraw from linked rewards
        for(uint i=0; i < extraRewards.length; i++){
            IRewards(extraRewards[i]).withdraw(msg.sender, amount);
        }
        
        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);

        //tell operator to withdraw from here directly to user
        IDeposit(operator).withdrawTo(pid,amount,msg.sender);
        emit Withdrawn(msg.sender, amount);

        //get rewards too
        if(claim){
            getReward(msg.sender,true);
        }
        return true;
    }

    function withdrawAllAndUnwrap(bool claim) external{
        withdrawAndUnwrap(_balances[msg.sender],claim);
    }

    function getReward(address _account, bool _claimExtras) public updateReward(_account) returns(bool){
        uint256 reward = earned(_account);
        if (reward > 0) {
            rewards[_account] = 0;
            rewardToken.safeTransfer(_account, reward);
            IDeposit(operator).rewardClaimed(pid, _account, reward);
            emit RewardPaid(_account, reward);
        }

        //also get rewards from linked rewards
        if(_claimExtras){
            for(uint i=0; i < extraRewards.length; i++){
                IRewards(extraRewards[i]).getReward(_account);
            }
        }
        return true;
    }

    function getReward() external returns(bool){
        getReward(msg.sender,true);
        return true;
    }

    function donate(uint256 _amount) external returns(bool){
        IERC20(rewardToken).safeTransferFrom(msg.sender, address(this), _amount);
        queuedRewards = queuedRewards.add(_amount);
    }

    function queueNewRewards(uint256 _rewards) external returns(bool){
        require(msg.sender == operator, "!authorized");

        _rewards = _rewards.add(queuedRewards);

        if (block.timestamp >= periodFinish) {
            notifyRewardAmount(_rewards);
            queuedRewards = 0;
            return true;
        }

        //et = now - (finish-duration)
        uint256 elapsedTime = block.timestamp.sub(periodFinish.sub(duration));
        //current at now: rewardRate * elapsedTime
        uint256 currentAtNow = rewardRate * elapsedTime;
        uint256 queuedRatio = currentAtNow.mul(1000).div(_rewards);

        //uint256 queuedRatio = currentRewards.mul(1000).div(_rewards);
        if(queuedRatio < newRewardRatio){
            notifyRewardAmount(_rewards);
            queuedRewards = 0;
        }else{
            queuedRewards = _rewards;
        }
        return true;
    }

    function notifyRewardAmount(uint256 reward)
        internal
        updateReward(address(0))
    {
        historicalRewards = historicalRewards.add(reward);
        if (block.timestamp >= periodFinish) {
            rewardRate = reward.div(duration);
        } else {
            uint256 remaining = periodFinish.sub(block.timestamp);
            uint256 leftover = remaining.mul(rewardRate);
            reward = reward.add(leftover);
            rewardRate = reward.div(duration);
        }
        currentRewards = reward;
        lastUpdateTime = block.timestamp;
        periodFinish = block.timestamp.add(duration);
        emit RewardAdded(reward);
    }
}

# @version 0.2.4
"""
@title Curve DAO Token
@author Curve Finance
@license MIT
@notice ERC20 with piecewise-linear mining supply.
@dev Based on the ERC-20 token standard as defined at
     https://eips.ethereum.org/EIPS/eip-20
"""

from vyper.interfaces import ERC20

implements: ERC20


event Transfer:
    _from: indexed(address)
    _to: indexed(address)
    _value: uint256

event Approval:
    _owner: indexed(address)
    _spender: indexed(address)
    _value: uint256

event UpdateMiningParameters:
    time: uint256
    rate: uint256
    supply: uint256

event SetMinter:
    minter: address

event SetAdmin:
    admin: address


name: public(String[64])
symbol: public(String[32])
decimals: public(uint256)

balanceOf: public(HashMap[address, uint256])
allowances: HashMap[address, HashMap[address, uint256]]
total_supply: uint256

minter: public(address)
admin: public(address)

# General constants
YEAR: constant(uint256) = 86400 * 365

# Allocation:
# =========
# * shareholders - 30%
# * emplyees - 3%
# * DAO-controlled reserve - 5%
# * Early users - 5%
# == 43% ==
# left for inflation: 57%

# Supply parameters
INITIAL_SUPPLY: constant(uint256) = 1_303_030_303
INITIAL_RATE: constant(uint256) = 274_815_283 * 10 ** 18 / YEAR  # leading to 43% premine
RATE_REDUCTION_TIME: constant(uint256) = YEAR
RATE_REDUCTION_COEFFICIENT: constant(uint256) = 1189207115002721024  # 2 ** (1/4) * 1e18
RATE_DENOMINATOR: constant(uint256) = 10 ** 18
INFLATION_DELAY: constant(uint256) = 86400

# Supply variables
mining_epoch: public(int128)
start_epoch_time: public(uint256)
rate: public(uint256)

start_epoch_supply: uint256


@external
def __init__(_name: String[64], _symbol: String[32], _decimals: uint256):
    """
    @notice Contract constructor
    @param _name Token full name
    @param _symbol Token symbol
    @param _decimals Number of decimals for token
    """
    init_supply: uint256 = INITIAL_SUPPLY * 10 ** _decimals
    self.name = _name
    self.symbol = _symbol
    self.decimals = _decimals
    self.balanceOf[msg.sender] = init_supply
    self.total_supply = init_supply
    self.admin = msg.sender
    log Transfer(ZERO_ADDRESS, msg.sender, init_supply)

    self.start_epoch_time = block.timestamp + INFLATION_DELAY - RATE_REDUCTION_TIME
    self.mining_epoch = -1
    self.rate = 0
    self.start_epoch_supply = init_supply


@internal
def _update_mining_parameters():
    """
    @dev Update mining rate and supply at the start of the epoch
         Any modifying mining call must also call this
    """
    _rate: uint256 = self.rate
    _start_epoch_supply: uint256 = self.start_epoch_supply

    self.start_epoch_time += RATE_REDUCTION_TIME
    self.mining_epoch += 1

    if _rate == 0:
        _rate = INITIAL_RATE
    else:
        _start_epoch_supply += _rate * RATE_REDUCTION_TIME
        self.start_epoch_supply = _start_epoch_supply
        _rate = _rate * RATE_DENOMINATOR / RATE_REDUCTION_COEFFICIENT

    self.rate = _rate

    log UpdateMiningParameters(block.timestamp, _rate, _start_epoch_supply)


@external
def update_mining_parameters():
    """
    @notice Update mining rate and supply at the start of the epoch
    @dev Callable by any address, but only once per epoch
         Total supply becomes slightly larger if this function is called late
    """
    assert block.timestamp >= self.start_epoch_time + RATE_REDUCTION_TIME  # dev: too soon!
    self._update_mining_parameters()


@external
def start_epoch_time_write() -> uint256:
    """
    @notice Get timestamp of the current mining epoch start
            while simultaneously updating mining parameters
    @return Timestamp of the epoch
    """
    _start_epoch_time: uint256 = self.start_epoch_time
    if block.timestamp >= _start_epoch_time + RATE_REDUCTION_TIME:
        self._update_mining_parameters()
        return self.start_epoch_time
    else:
        return _start_epoch_time


@external
def future_epoch_time_write() -> uint256:
    """
    @notice Get timestamp of the next mining epoch start
            while simultaneously updating mining parameters
    @return Timestamp of the next epoch
    """
    _start_epoch_time: uint256 = self.start_epoch_time
    if block.timestamp >= _start_epoch_time + RATE_REDUCTION_TIME:
        self._update_mining_parameters()
        return self.start_epoch_time + RATE_REDUCTION_TIME
    else:
        return _start_epoch_time + RATE_REDUCTION_TIME


@internal
@view
def _available_supply() -> uint256:
    return self.start_epoch_supply + (block.timestamp - self.start_epoch_time) * self.rate


@external
@view
def available_supply() -> uint256:
    """
    @notice Current number of tokens in existence (claimed or unclaimed)
    """
    return self._available_supply()


@external
@view
def mintable_in_timeframe(start: uint256, end: uint256) -> uint256:
    """
    @notice How much supply is mintable from start timestamp till end timestamp
    @param start Start of the time interval (timestamp)
    @param end End of the time interval (timestamp)
    @return Tokens mintable from `start` till `end`
    """
    assert start <= end  # dev: start > end
    to_mint: uint256 = 0
    current_epoch_time: uint256 = self.start_epoch_time
    current_rate: uint256 = self.rate

    # Special case if end is in future (not yet minted) epoch
    if end > current_epoch_time + RATE_REDUCTION_TIME:
        current_epoch_time += RATE_REDUCTION_TIME
        current_rate = current_rate * RATE_DENOMINATOR / RATE_REDUCTION_COEFFICIENT

    assert end <= current_epoch_time + RATE_REDUCTION_TIME  # dev: too far in future

    for i in range(999):  # Curve will not work in 1000 years. Darn!
        if end >= current_epoch_time:
            current_end: uint256 = end
            if current_end > current_epoch_time + RATE_REDUCTION_TIME:
                current_end = current_epoch_time + RATE_REDUCTION_TIME

            current_start: uint256 = start
            if current_start >= current_epoch_time + RATE_REDUCTION_TIME:
                break  # We should never get here but what if...
            elif current_start < current_epoch_time:
                current_start = current_epoch_time

            to_mint += current_rate * (current_end - current_start)

            if start >= current_epoch_time:
                break

        current_epoch_time -= RATE_REDUCTION_TIME
        current_rate = current_rate * RATE_REDUCTION_COEFFICIENT / RATE_DENOMINATOR  # double-division with rounding made rate a bit less => good
        assert current_rate <= INITIAL_RATE  # This should never happen

    return to_mint


@external
def set_minter(_minter: address):
    """
    @notice Set the minter address
    @dev Only callable once, when minter has not yet been set
    @param _minter Address of the minter
    """
    assert msg.sender == self.admin  # dev: admin only
    assert self.minter == ZERO_ADDRESS  # dev: can set the minter only once, at creation
    self.minter = _minter
    log SetMinter(_minter)


@external
def set_admin(_admin: address):
    """
    @notice Set the new admin.
    @dev After all is set up, admin only can change the token name
    @param _admin New admin address
    """
    assert msg.sender == self.admin  # dev: admin only
    self.admin = _admin
    log SetAdmin(_admin)


@external
@view
def totalSupply() -> uint256:
    """
    @notice Total number of tokens in existence.
    """
    return self.total_supply


@external
@view
def allowance(_owner : address, _spender : address) -> uint256:
    """
    @notice Check the amount of tokens that an owner allowed to a spender
    @param _owner The address which owns the funds
    @param _spender The address which will spend the funds
    @return uint256 specifying the amount of tokens still available for the spender
    """
    return self.allowances[_owner][_spender]


@external
def transfer(_to : address, _value : uint256) -> bool:
    """
    @notice Transfer `_value` tokens from `msg.sender` to `_to`
    @dev Vyper does not allow underflows, so the subtraction in
         this function will revert on an insufficient balance
    @param _to The address to transfer to
    @param _value The amount to be transferred
    @return bool success
    """
    assert _to != ZERO_ADDRESS  # dev: transfers to 0x0 are not allowed
    self.balanceOf[msg.sender] -= _value
    self.balanceOf[_to] += _value
    log Transfer(msg.sender, _to, _value)
    return True


@external
def transferFrom(_from : address, _to : address, _value : uint256) -> bool:
    """
     @notice Transfer `_value` tokens from `_from` to `_to`
     @param _from address The address which you want to send tokens from
     @param _to address The address which you want to transfer to
     @param _value uint256 the amount of tokens to be transferred
     @return bool success
    """
    assert _to != ZERO_ADDRESS  # dev: transfers to 0x0 are not allowed
    # NOTE: vyper does not allow underflows
    #       so the following subtraction would revert on insufficient balance
    self.balanceOf[_from] -= _value
    self.balanceOf[_to] += _value
    self.allowances[_from][msg.sender] -= _value
    log Transfer(_from, _to, _value)
    return True


@external
def approve(_spender : address, _value : uint256) -> bool:
    """
    @notice Approve `_spender` to transfer `_value` tokens on behalf of `msg.sender`
    @dev Approval may only be from zero -> nonzero or from nonzero -> zero in order
        to mitigate the potential race condition described here:
        https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    @param _spender The address which will spend the funds
    @param _value The amount of tokens to be spent
    @return bool success
    """
    assert _value == 0 or self.allowances[msg.sender][_spender] == 0
    self.allowances[msg.sender][_spender] = _value
    log Approval(msg.sender, _spender, _value)
    return True


@external
def mint(_to: address, _value: uint256) -> bool:
    """
    @notice Mint `_value` tokens and assign them to `_to`
    @dev Emits a Transfer event originating from 0x00
    @param _to The account that will receive the created tokens
    @param _value The amount that will be created
    @return bool success
    """
    assert msg.sender == self.minter  # dev: minter only
    assert _to != ZERO_ADDRESS  # dev: zero address

    if block.timestamp >= self.start_epoch_time + RATE_REDUCTION_TIME:
        self._update_mining_parameters()

    _total_supply: uint256 = self.total_supply + _value
    assert _total_supply <= self._available_supply()  # dev: exceeds allowable mint amount
    self.total_supply = _total_supply

    self.balanceOf[_to] += _value
    log Transfer(ZERO_ADDRESS, _to, _value)

    return True


@external
def burn(_value: uint256) -> bool:
    """
    @notice Burn `_value` tokens belonging to `msg.sender`
    @dev Emits a Transfer event with a destination of 0x00
    @param _value The amount that will be burned
    @return bool success
    """
    self.balanceOf[msg.sender] -= _value
    self.total_supply -= _value

    log Transfer(msg.sender, ZERO_ADDRESS, _value)
    return True


@external
def set_name(_name: String[64], _symbol: String[32]):
    """
    @notice Change the token name and symbol to `_name` and `_symbol`
    @dev Only callable by the admin account
    @param _name New token name
    @param _symbol New token symbol
    """
    assert msg.sender == self.admin, "Only admin is allowed to change name"
    self.name = _name
    self.symbol = _symbol

// SPDX-License-Identifier: MIT


// File: contracts\Interfaces.sol
pragma solidity 0.6.12;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library MathUtil {
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
}

contract ReentrancyGuard {
    uint256 private _guardCounter;

    constructor () internal {
        _guardCounter = 1;
    }

    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

interface ICurveGauge {
    function deposit(uint256) external;
    function balanceOf(address) external view returns (uint256);
    function withdraw(uint256) external;
    function claim_rewards() external;
    function reward_tokens(uint256) external view returns(address);//v2
    function rewarded_token() external view returns(address);//v1
}

interface ICurveVoteEscrow {
    function create_lock(uint256, uint256) external;
    function increase_amount(uint256) external;
    function increase_unlock_time(uint256) external;
    function withdraw() external;
    function smart_wallet_checker() external view returns (address);
}

interface IWalletChecker {
    function check(address) external view returns (bool);
}

interface IVoting{
    function vote(uint256, bool, bool) external; //voteId, support, executeIfDecided
    function getVote(uint256) external view returns(bool,bool,uint64,uint64,uint64,uint64,uint256,uint256,uint256,bytes memory); 
    function vote_for_gauge_weights(address,uint256) external;
}

interface IMinter{
    function mint(address) external;
}

interface IRegistry{
    function get_registry() external view returns(address);
    function get_address(uint256 _id) external view returns(address);
    function gauge_controller() external view returns(address);
    function get_lp_token(address) external view returns(address);
    function get_gauges(address) external view returns(address[10] memory,uint128[10] memory);
}

interface IStaker{
    function deposit(address, address) external;
    function withdraw(address) external;
    function withdraw(address, address, uint256) external;
    function withdrawAll(address, address) external;
    function createLock(uint256, uint256) external;
    function increaseAmount(uint256) external;
    function increaseTime(uint256) external;
    function release() external;
    function claimCrv(address) external returns (uint256);
    function claimRewards(address) external;
    function claimFees(address,address) external;
    function setStashAccess(address, bool) external;
    function vote(uint256,address,bool) external;
    function voteGaugeWeight(address,uint256) external;
    function balanceOfPool(address) external view returns (uint256);
    function operator() external view returns (address);
    function execute(address _to, uint256 _value, bytes calldata _data) external returns (bool, bytes memory);
}

interface IRewards{
    function stake(address, uint256) external;
    function stakeFor(address, uint256) external;
    function withdraw(address, uint256) external;
    function exit(address) external;
    function getReward(address) external;
    function queueNewRewards(uint256) external;
    function notifyRewardAmount(uint256) external;
    function addExtraReward(address) external;
    function stakingToken() external returns (address);
}

interface IStash{
    function stashRewards() external returns (bool);
    function processStash() external returns (bool);
    function claimRewards() external returns (bool);
}

interface IFeeDistro{
    function claim() external;
    function token() external view returns(address);
}

interface ITokenMinter{
    function mint(address,uint256) external;
    function burn(address,uint256) external;
}

interface IDeposit{
    function isShutdown() external view returns(bool);
    function balanceOf(address _account) external view returns(uint256);
    function totalSupply() external view returns(uint256);
    function poolInfo(uint256) external view returns(address,address,address,address,address, bool);
    function rewardClaimed(uint256,address,uint256) external;
    function withdrawTo(uint256,uint256,address) external;
    function claimRewards(uint256,address) external returns(bool);
    function rewardArbitrator() external returns(address);
}

interface ICrvDeposit{
    function deposit(uint256, bool) external;
    function lockIncentive() external view returns(uint256);
}

interface IRewardFactory{
    function setAccess(address,bool) external;
    function CreateCrvRewards(uint256,address) external returns(address);
    function CreateTokenRewards(address,address,address) external returns(address);
    function activeRewardCount(address) external view returns(uint256);
    function addActiveReward(address,uint256) external returns(bool);
    function removeActiveReward(address,uint256) external returns(bool);
}

interface IStashFactory{
    function CreateStash(uint256,address,address,uint256) external returns(address);
}

interface ITokenFactory{
    function CreateDepositToken(address) external returns(address);
}

interface IPools{
    function addPool(address _lptoken, address _gauge, uint256 _stashVersion) external returns(bool);
    function shutdownPool(uint256 _pid) external returns(bool);
    function poolInfo(uint256) external view returns(address,address,address,address,address,bool);
    function poolLength() external view returns (uint256);
    function gaugeMap(address) external view returns(bool);
    function setPoolManager(address _poolM) external;
}

interface IVestedEscrow{
    function fund(address[] calldata _recipient, uint256[] calldata _amount) external returns(bool);
}

// File: @openzeppelin\contracts\math\SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin\contracts\token\ERC20\IERC20.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin\contracts\utils\Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin\contracts\token\ERC20\SafeERC20.sol

pragma solidity >=0.6.0 <0.8.0;


/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: node_modules\@openzeppelin\contracts\utils\Context.sol

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin\contracts\token\ERC20\ERC20.sol

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: contracts\Cvx.sol

pragma solidity 0.6.12;


contract ConvexToken is ERC20{
    using SafeERC20 for IERC20;
    using Address for address;
    using SafeMath for uint256;

    address public operator;
    address public vecrvProxy;

    uint256 public maxSupply = 100 * 1000000 * 1e18; //100mil
    uint256 public totalCliffs = 1000;
    uint256 public reductionPerCliff;

    constructor(address _proxy)
        public
        ERC20(
            "Convex Token",
            "CVX"
        )
    {
        operator = msg.sender;
        vecrvProxy = _proxy;
        reductionPerCliff = maxSupply.div(totalCliffs);
    }

    //get current operator off proxy incase there was a change
    function updateOperator() public {
        operator = IStaker(vecrvProxy).operator();
    }
    
    function mint(address _to, uint256 _amount) external {
        if(msg.sender != operator){
            //dont error just return. if a shutdown happens, rewards on old system
            //can still be claimed, just wont mint cvx
            return;
        }

        uint256 supply = totalSupply();
        if(supply == 0){
            //premine, one time only
            _mint(_to,_amount);
            //automatically switch operators
            updateOperator();
            return;
        }
        
        //use current supply to gauge cliff
        //this will cause a bit of overflow into the next cliff range
        //but should be within reasonable levels.
        //requires a max supply check though
        uint256 cliff = supply.div(reductionPerCliff);
        //mint if below total cliffs
        if(cliff < totalCliffs){
            //for reduction% take inverse of current cliff
            uint256 reduction = totalCliffs.sub(cliff);
            //reduce
            _amount = _amount.mul(reduction).div(totalCliffs);

            //supply cap check
            uint256 amtTillMax = maxSupply.sub(supply);
            if(_amount > amtTillMax){
                _amount = amtTillMax;
            }

            //mint
            _mint(_to, _amount);
        }
    }

}

// SPDX-License-Identifier: MIT
// File: contracts\Interfaces.sol

pragma solidity 0.6.12;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library MathUtil {
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
}

contract ReentrancyGuard {
    uint256 private _guardCounter;

    constructor () internal {
        _guardCounter = 1;
    }

    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

interface ICurveGauge {
    function deposit(uint256) external;
    function balanceOf(address) external view returns (uint256);
    function withdraw(uint256) external;
    function claim_rewards() external;
    function reward_tokens(uint256) external view returns(address);//v2
    function rewarded_token() external view returns(address);//v1
}

interface ICurveVoteEscrow {
    function create_lock(uint256, uint256) external;
    function increase_amount(uint256) external;
    function increase_unlock_time(uint256) external;
    function withdraw() external;
    function smart_wallet_checker() external view returns (address);
}

interface IWalletChecker {
    function check(address) external view returns (bool);
}

interface IVoting{
    function vote(uint256, bool, bool) external; //voteId, support, executeIfDecided
    function getVote(uint256) external view returns(bool,bool,uint64,uint64,uint64,uint64,uint256,uint256,uint256,bytes memory); 
    function vote_for_gauge_weights(address,uint256) external;
}

interface IMinter{
    function mint(address) external;
}

interface IRegistry{
    function get_registry() external view returns(address);
    function get_address(uint256 _id) external view returns(address);
    function gauge_controller() external view returns(address);
    function get_lp_token(address) external view returns(address);
    function get_gauges(address) external view returns(address[10] memory,uint128[10] memory);
}

interface IStaker{
    function deposit(address, address) external;
    function withdraw(address) external;
    function withdraw(address, address, uint256) external;
    function withdrawAll(address, address) external;
    function createLock(uint256, uint256) external;
    function increaseAmount(uint256) external;
    function increaseTime(uint256) external;
    function release() external;
    function claimCrv(address) external returns (uint256);
    function claimRewards(address) external;
    function claimFees(address,address) external;
    function setStashAccess(address, bool) external;
    function vote(uint256,address,bool) external;
    function voteGaugeWeight(address,uint256) external;
    function balanceOfPool(address) external view returns (uint256);
    function operator() external view returns (address);
    function execute(address _to, uint256 _value, bytes calldata _data) external returns (bool, bytes memory);
}

interface IRewards{
    function stake(address, uint256) external;
    function stakeFor(address, uint256) external;
    function withdraw(address, uint256) external;
    function exit(address) external;
    function getReward(address) external;
    function queueNewRewards(uint256) external;
    function notifyRewardAmount(uint256) external;
    function addExtraReward(address) external;
    function stakingToken() external returns (address);
}

interface IStash{
    function stashRewards() external returns (bool);
    function processStash() external returns (bool);
    function claimRewards() external returns (bool);
}

interface IFeeDistro{
    function claim() external;
    function token() external view returns(address);
}

interface ITokenMinter{
    function mint(address,uint256) external;
    function burn(address,uint256) external;
}

interface IDeposit{
    function isShutdown() external view returns(bool);
    function balanceOf(address _account) external view returns(uint256);
    function totalSupply() external view returns(uint256);
    function poolInfo(uint256) external view returns(address,address,address,address,address, bool);
    function rewardClaimed(uint256,address,uint256) external;
    function withdrawTo(uint256,uint256,address) external;
    function claimRewards(uint256,address) external returns(bool);
    function rewardArbitrator() external returns(address);
}

interface ICrvDeposit{
    function deposit(uint256, bool) external;
    function lockIncentive() external view returns(uint256);
}

interface IRewardFactory{
    function setAccess(address,bool) external;
    function CreateCrvRewards(uint256,address) external returns(address);
    function CreateTokenRewards(address,address,address) external returns(address);
    function activeRewardCount(address) external view returns(uint256);
    function addActiveReward(address,uint256) external returns(bool);
    function removeActiveReward(address,uint256) external returns(bool);
}

interface IStashFactory{
    function CreateStash(uint256,address,address,uint256) external returns(address);
}

interface ITokenFactory{
    function CreateDepositToken(address) external returns(address);
}

interface IPools{
    function addPool(address _lptoken, address _gauge, uint256 _stashVersion) external returns(bool);
    function shutdownPool(uint256 _pid) external returns(bool);
    function poolInfo(uint256) external view returns(address,address,address,address,address,bool);
    function poolLength() external view returns (uint256);
    function gaugeMap(address) external view returns(bool);
    function setPoolManager(address _poolM) external;
}

interface IVestedEscrow{
    function fund(address[] calldata _recipient, uint256[] calldata _amount) external returns(bool);
}

// File: @openzeppelin\contracts\math\SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin\contracts\token\ERC20\IERC20.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin\contracts\utils\Address.sol
pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin\contracts\token\ERC20\SafeERC20.sol


pragma solidity >=0.6.0 <0.8.0;


/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: contracts\Booster.sol

pragma solidity 0.6.12;



contract Booster{
    using SafeERC20 for IERC20;
    using Address for address;
    using SafeMath for uint256;

    address public constant crv = address(0xD533a949740bb3306d119CC777fa900bA034cd52);
    address public constant registry = address(0x0000000022D53366457F9d5E68Ec105046FC4383);
    uint256 public constant distributionAddressId = 4;
    address public constant voteOwnership = address(0xE478de485ad2fe566d49342Cbd03E49ed7DB3356);
    address public constant voteParameter = address(0xBCfF8B0b9419b9A88c44546519b1e909cF330399);

    uint256 public lockIncentive = 1000; //incentive to crv stakers
    uint256 public stakerIncentive = 450; //incentive to native token stakers
    uint256 public earmarkIncentive = 50; //incentive to users who spend gas to make calls
    uint256 public platformFee = 0; //possible fee to build treasury
    uint256 public constant MaxFees = 2000;
    uint256 public constant FEE_DENOMINATOR = 10000;

    address public owner;
    address public feeManager;
    address public poolManager;
    address public immutable staker;
    address public immutable minter;
    address public rewardFactory;
    address public stashFactory;
    address public tokenFactory;
    address public rewardArbitrator;
    address public voteDelegate;
    address public treasury;
    address public stakerRewards; //cvx rewards
    address public lockRewards; //cvxCrv rewards(crv)
    address public lockFees; //cvxCrv vecrv fees
    address public feeDistro;
    address public feeToken;

    bool public isShutdown;

    struct PoolInfo {
        address lptoken;
        address token;
        address gauge;
        address crvRewards;
        address stash;
        bool shutdown;
    }

    //index(pid) -> pool
    PoolInfo[] public poolInfo;
    mapping(address => bool) public gaugeMap;

    event Deposited(address indexed user, uint256 indexed poolid, uint256 amount);
    event Withdrawn(address indexed user, uint256 indexed poolid, uint256 amount);

    constructor(address _staker, address _minter) public {
        isShutdown = false;
        staker = _staker;
        owner = msg.sender;
        voteDelegate = msg.sender;
        feeManager = msg.sender;
        poolManager = msg.sender;
        feeDistro = address(0); //address(0xA464e6DCda8AC41e03616F95f4BC98a13b8922Dc);
        feeToken = address(0); //address(0x6c3F90f043a72FA612cbac8115EE7e52BDe6E490);
        treasury = address(0);
        minter = _minter;
    }


    /// SETTER SECTION ///

    function setOwner(address _owner) external {
        require(msg.sender == owner, "!auth");
        owner = _owner;
    }

    function setFeeManager(address _feeM) external {
        require(msg.sender == feeManager, "!auth");
        feeManager = _feeM;
    }

    function setPoolManager(address _poolM) external {
        require(msg.sender == poolManager, "!auth");
        poolManager = _poolM;
    }

    function setFactories(address _rfactory, address _sfactory, address _tfactory) external {
        require(msg.sender == owner, "!auth");
        
        //reward factory only allow this to be called once even if owner
        //removes ability to inject malicious staking contracts
        //token factory can also be immutable
        if(rewardFactory == address(0)){
            rewardFactory = _rfactory;
            tokenFactory = _tfactory;
        }

        //stash factory should be considered more safe to change
        //updating may be required to handle new types of gauges
        stashFactory = _sfactory;
    }

    function setArbitrator(address _arb) external {
        require(msg.sender==owner, "!auth");
        rewardArbitrator = _arb;
    }

    function setVoteDelegate(address _voteDelegate) external {
        require(msg.sender==voteDelegate, "!auth");
        voteDelegate = _voteDelegate;
    }

    function setRewardContracts(address _rewards, address _stakerRewards) external {
        require(msg.sender == owner, "!auth");
        
        //reward contracts are immutable or else the owner
        //has a means to redeploy and mint cvx via rewardClaimed()
        if(lockRewards == address(0)){
            lockRewards = _rewards;
            stakerRewards = _stakerRewards;
        }
    }

    // Set reward token and claim contract, get from Curve's registry
    function setFeeInfo() external {
        require(msg.sender==feeManager, "!auth");
        
        feeDistro = IRegistry(registry).get_address(distributionAddressId);
        address _feeToken = IFeeDistro(feeDistro).token();
        if(feeToken != _feeToken){
            //create a new reward contract for the new token
            lockFees = IRewardFactory(rewardFactory).CreateTokenRewards(_feeToken,lockRewards,address(this));
            feeToken = _feeToken;
        }
    }

    function setFees(uint256 _lockFees, uint256 _stakerFees, uint256 _callerFees, uint256 _platform) external{
        require(msg.sender==feeManager, "!auth");

        uint256 total = _lockFees.add(_stakerFees).add(_callerFees).add(_platform);
        require(total <= MaxFees, ">MaxFees");

        //values must be within certain ranges     
        if(_lockFees >= 1000 && _lockFees <= 1500
            && _stakerFees >= 300 && _stakerFees <= 600
            && _callerFees >= 10 && _callerFees <= 100
            && _platform <= 200){
            lockIncentive = _lockFees;
            stakerIncentive = _stakerFees;
            earmarkIncentive = _callerFees;
            platformFee = _platform;
        }
    }

    function setTreasury(address _treasury) external {
        require(msg.sender==feeManager, "!auth");
        treasury = _treasury;
    }

    /// END SETTER SECTION ///


    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    //create a new pool
    function addPool(address _lptoken, address _gauge, uint256 _stashVersion) external returns(bool){
        require(msg.sender==poolManager && !isShutdown, "!add");
        require(_gauge != address(0) && _lptoken != address(0),"!param");

        //the next pool's pid
        uint256 pid = poolInfo.length;

        //create a tokenized deposit
        address token = ITokenFactory(tokenFactory).CreateDepositToken(_lptoken);
        //create a reward contract for crv rewards
        address newRewardPool = IRewardFactory(rewardFactory).CreateCrvRewards(pid,token);
        //create a stash to handle extra incentives
        address stash = IStashFactory(stashFactory).CreateStash(pid,_gauge,staker,_stashVersion);

        //add the new pool
        poolInfo.push(
            PoolInfo({
                lptoken: _lptoken,
                token: token,
                gauge: _gauge,
                crvRewards: newRewardPool,
                stash: stash,
                shutdown: false
            })
        );
        gaugeMap[_gauge] = true;
        //give stashes access to rewardfactory and voteproxy
        //   voteproxy so it can grab the incentive tokens off the contract after claiming rewards
        //   reward factory so that stashes can make new extra reward contracts if a new incentive is added to the gauge
        if(stash != address(0)){
            poolInfo[pid].stash = stash;
            IStaker(staker).setStashAccess(stash,true);
            IRewardFactory(rewardFactory).setAccess(stash,true);
        }
        return true;
    }

    //shutdown pool
    function shutdownPool(uint256 _pid) external returns(bool){
        require(msg.sender==poolManager, "!auth");
        PoolInfo storage pool = poolInfo[_pid];

        //withdraw from gauge
        try IStaker(staker).withdrawAll(pool.lptoken,pool.gauge){
        }catch{}

        pool.shutdown = true;
        gaugeMap[pool.gauge] = false;
        return true;
    }

    //shutdown this contract.
    //  unstake and pull all lp tokens to this address
    //  only allow withdrawals
    function shutdownSystem() external{
        require(msg.sender == owner, "!auth");
        isShutdown = true;

        for(uint i=0; i < poolInfo.length; i++){
            PoolInfo storage pool = poolInfo[i];
            if (pool.shutdown) continue;

            address token = pool.lptoken;
            address gauge = pool.gauge;

            //withdraw from gauge
            try IStaker(staker).withdrawAll(token,gauge){
                pool.shutdown = true;
            }catch{}
        }
    }


    //deposit lp tokens and stake
    function deposit(uint256 _pid, uint256 _amount, bool _stake) public returns(bool){
        require(!isShutdown,"shutdown");
        PoolInfo storage pool = poolInfo[_pid];
        require(pool.shutdown == false, "pool is closed");

        //send to proxy to stake
        address lptoken = pool.lptoken;
        IERC20(lptoken).safeTransferFrom(msg.sender, staker, _amount);

        //stake
        address gauge = pool.gauge;
        require(gauge != address(0),"!gauge setting");
        IStaker(staker).deposit(lptoken,gauge);

        //some gauges claim rewards when depositing, stash them in a seperate contract until next claim
        address stash = pool.stash;
        if(stash != address(0)){
            IStash(stash).stashRewards();
        }

        address token = pool.token;
        if(_stake){
            //mint here and send to rewards on user behalf
            ITokenMinter(token).mint(address(this),_amount);
            address rewardContract = pool.crvRewards;
            IERC20(token).safeApprove(rewardContract,0);
            IERC20(token).safeApprove(rewardContract,_amount);
            IRewards(rewardContract).stakeFor(msg.sender,_amount);
        }else{
            //add user balance directly
            ITokenMinter(token).mint(msg.sender,_amount);
        }

        
        emit Deposited(msg.sender, _pid, _amount);
        return true;
    }

    //deposit all lp tokens and stake
    function depositAll(uint256 _pid, bool _stake) external returns(bool){
        address lptoken = poolInfo[_pid].lptoken;
        uint256 balance = IERC20(lptoken).balanceOf(msg.sender);
        deposit(_pid,balance,_stake);
        return true;
    }

    //withdraw lp tokens
    function _withdraw(uint256 _pid, uint256 _amount, address _from, address _to) internal {
        PoolInfo storage pool = poolInfo[_pid];
        address lptoken = pool.lptoken;
        address gauge = pool.gauge;

        //remove lp balance
        address token = pool.token;
        ITokenMinter(token).burn(_from,_amount);

        //pull from gauge if not shutdown
        // if shutdown tokens will be in this contract
        if (!pool.shutdown) {
            IStaker(staker).withdraw(lptoken,gauge, _amount);
        }

        //some gauges claim rewards when withdrawing, stash them in a seperate contract until next claim
        //do not call if shutdown since stashes wont have access
        address stash = pool.stash;
        if(stash != address(0) && !isShutdown && !pool.shutdown){
            IStash(stash).stashRewards();
        }
        
        //return lp tokens
        IERC20(lptoken).safeTransfer(_to, _amount);

        emit Withdrawn(_to, _pid, _amount);
    }

    //withdraw lp tokens
    function withdraw(uint256 _pid, uint256 _amount) public returns(bool){
        _withdraw(_pid,_amount,msg.sender,msg.sender);
        return true;
    }

    //withdraw all lp tokens
    function withdrawAll(uint256 _pid) public returns(bool){
        address token = poolInfo[_pid].token;
        uint256 userBal = IERC20(token).balanceOf(msg.sender);
        withdraw(_pid, userBal);
        return true;
    }

    //allow reward contracts to send here and withdraw to user
    function withdrawTo(uint256 _pid, uint256 _amount, address _to) external returns(bool){
        address rewardContract = poolInfo[_pid].crvRewards;
        require(msg.sender == rewardContract,"!auth");

        _withdraw(_pid,_amount,msg.sender,_to);
        return true;
    }


    //delegate address votes on dao
    function vote(uint256 _voteId, address _votingAddress, bool _support) external returns(bool){
        require(msg.sender == voteDelegate, "!auth");
        require(_votingAddress == voteOwnership || _votingAddress == voteParameter, "!voteAddr");
        
        IStaker(staker).vote(_voteId,_votingAddress,_support);
        return true;
    }

    function voteGaugeWeight(address[] calldata _gauge, uint256[] calldata _weight ) external returns(bool){
        require(msg.sender == voteDelegate, "!auth");

        for(uint256 i = 0; i < _gauge.length; i++){
            IStaker(staker).voteGaugeWeight(_gauge[i],_weight[i]);
        }
        return true;
    }

    function claimRewards(uint256 _pid, address _gauge) external returns(bool){
        address stash = poolInfo[_pid].stash;
        require(msg.sender == stash,"!auth");

        IStaker(staker).claimRewards(_gauge);
        return true;
    }

    function setGaugeRedirect(uint256 _pid) external returns(bool){
        address stash = poolInfo[_pid].stash;
        require(msg.sender == stash,"!auth");
        address gauge = poolInfo[_pid].gauge;
        bytes memory data = abi.encodeWithSelector(bytes4(keccak256("set_rewards_receiver(address)")), stash);
        IStaker(staker).execute(gauge,uint256(0),data);
        return true;
    }

    //claim crv and extra rewards and disperse to reward contracts
    function _earmarkRewards(uint256 _pid) internal {
        PoolInfo storage pool = poolInfo[_pid];
        require(pool.shutdown == false, "pool is closed");

        address gauge = pool.gauge;

        //claim crv
        IStaker(staker).claimCrv(gauge);

        //check if there are extra rewards
        address stash = pool.stash;
        if(stash != address(0)){
            //claim extra rewards
            IStash(stash).claimRewards();
            //process extra rewards
            IStash(stash).processStash();
        }

        //crv balance
        uint256 crvBal = IERC20(crv).balanceOf(address(this));

        if (crvBal > 0) {
            uint256 _lockIncentive = crvBal.mul(lockIncentive).div(FEE_DENOMINATOR);
            uint256 _stakerIncentive = crvBal.mul(stakerIncentive).div(FEE_DENOMINATOR);
            uint256 _callIncentive = crvBal.mul(earmarkIncentive).div(FEE_DENOMINATOR);
            
            //send treasury
            if(treasury != address(0) && treasury != address(this) && platformFee > 0){
                //only subtract after address condition check
                uint256 _platform = crvBal.mul(platformFee).div(FEE_DENOMINATOR);
                crvBal = crvBal.sub(_platform);
                IERC20(crv).safeTransfer(treasury, _platform);
            }

            //remove incentives from balance
            crvBal = crvBal.sub(_lockIncentive).sub(_callIncentive).sub(_stakerIncentive);

            //send incentives for calling
            IERC20(crv).safeTransfer(msg.sender, _callIncentive);          

            //send crv to lp provider reward contract
            address rewardContract = pool.crvRewards;
            IERC20(crv).safeTransfer(rewardContract, crvBal);
            IRewards(rewardContract).queueNewRewards(crvBal);

            //send lockers' share of crv to reward contract
            IERC20(crv).safeTransfer(lockRewards, _lockIncentive);
            IRewards(lockRewards).queueNewRewards(_lockIncentive);

            //send stakers's share of crv to reward contract
            IERC20(crv).safeTransfer(stakerRewards, _stakerIncentive);
            IRewards(stakerRewards).queueNewRewards(_stakerIncentive);
        }
    }

    function earmarkRewards(uint256 _pid) external returns(bool){
        require(!isShutdown,"shutdown");
        _earmarkRewards(_pid);
        return true;
    }

    //claim fees from curve distro contract, put in lockers' reward contract
    function earmarkFees() external returns(bool){
        //claim fee rewards
        IStaker(staker).claimFees(feeDistro, feeToken);
        //send fee rewards to reward contract
        uint256 _balance = IERC20(feeToken).balanceOf(address(this));
        IERC20(feeToken).safeTransfer(lockFees, _balance);
        IRewards(lockFees).queueNewRewards(_balance);
        return true;
    }

    //callback from reward contract when crv is received.
    function rewardClaimed(uint256 _pid, address _address, uint256 _amount) external returns(bool){
        address rewardContract = poolInfo[_pid].crvRewards;
        require(msg.sender == rewardContract || msg.sender == lockRewards, "!auth");

        //mint reward tokens
        ITokenMinter(minter).mint(_address,_amount);
        
        return true;
    }

}