// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.10;
import './TransferHelper.sol';
import './ERC20Interface.sol';
import './IForwarder.sol';
/** ERC721, ERC1155 imports */
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol';
/**
 *
 * WalletSimple
 * ============
 *
 * Basic multi-signer wallet designed for use in a co-signing environment where 2 signatures are required to move funds.
 * Typically used in a 2-of-3 signing configuration. Uses ecrecover to allow for 2 signatures in a single transaction.
 *
 * The first signature is created on the operation hash (see Data Formats) and passed to sendMultiSig/sendMultiSigToken
 * The signer is determined by verifyMultiSig().
 *
 * The second signature is created by the submitter of the transaction and determined by msg.signer.
 *
 * Data Formats
 * ============
 *
 * The signature is created with ethereumjs-util.ecsign(operationHash).
 * Like the eth_sign RPC call, it packs the values as a 65-byte array of [r, s, v].
 * Unlike eth_sign, the message is not prefixed.
 *
 * The operationHash the result of keccak256(prefix, toAddress, value, data, expireTime).
 * For ether transactions, `prefix` is "ETHER".
 * For token transaction, `prefix` is "ERC20" and `data` is the tokenContractAddress.
 *
 *
 */
contract WalletSimple is IERC721Receiver, ERC1155Receiver {
  // Events
  event Deposited(address from, uint256 value, bytes data);
  event SafeModeActivated(address msgSender);
  event Transacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation, // Operation hash (see Data Formats)
    address toAddress, // The address the transaction was sent to
    uint256 value, // Amount of Wei sent to the address
    bytes data // Data sent when invoking the transaction
  );
  event BatchTransfer(address sender, address recipient, uint256 value);
  // this event shows the other signer and the operation hash that they signed
  // specific batch transfer events are emitted in Batcher
  event BatchTransacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation // Operation hash (see Data Formats)
  );
  // Public fields
  mapping(address => bool) public signers; // The addresses that can co-sign transactions on the wallet
  bool public safeMode = false; // When active, wallet may only send to signer addresses
  bool public initialized = false; // True if the contract has been initialized
  // Internal fields
  uint256 private constant MAX_SEQUENCE_ID_INCREASE = 10000;
  uint256 constant SEQUENCE_ID_WINDOW_SIZE = 10;
  uint256[SEQUENCE_ID_WINDOW_SIZE] recentSequenceIds;
  /**
   * Set up a simple multi-sig wallet by specifying the signers allowed to be used on this wallet.
   * 2 signers will be required to send a transaction from this wallet.
   * Note: The sender is NOT automatically added to the list of signers.
   * Signers CANNOT be changed once they are set
   *
   * @param allowedSigners An array of signers on the wallet
   */
  function init(address[] calldata allowedSigners) external onlyUninitialized {
    require(allowedSigners.length == 3, 'Invalid number of signers');
    for (uint8 i = 0; i < allowedSigners.length; i++) {
      require(allowedSigners[i] != address(0), 'Invalid signer');
      signers[allowedSigners[i]] = true;
    }
    initialized = true;
  }
  /**
   * Get the network identifier that signers must sign over
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER';
  }
  /**
   * Get the network identifier that signers must sign over for token transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getTokenNetworkId() internal virtual pure returns (string memory) {
    return 'ERC20';
  }
  /**
   * Get the network identifier that signers must sign over for batch transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getBatchNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER-Batch';
  }
  /**
   * Determine if an address is a signer on this wallet
   * @param signer address to check
   * returns boolean indicating whether address is signer or not
   */
  function isSigner(address signer) public view returns (bool) {
    return signers[signer];
  }
  /**
   * Modifier that will execute internal code block only if the sender is an authorized signer on this wallet
   */
  modifier onlySigner {
    require(isSigner(msg.sender), 'Non-signer in onlySigner method');
    _;
  }
  /**
   * Modifier that will execute internal code block only if the contract has not been initialized yet
   */
  modifier onlyUninitialized {
    require(!initialized, 'Contract already initialized');
    _;
  }
  /**
   * Gets called when a transaction is received with data that does not match any other method
   */
  fallback() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      emit Deposited(msg.sender, msg.value, msg.data);
    }
  }
  /**
   * Gets called when a transaction is received with ether and no data
   */
  receive() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      // message data is always empty for receive. If there is data it is sent to fallback function.
      emit Deposited(msg.sender, msg.value, '');
    }
  }
  /**
   * Execute a multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in Wei to be sent
   * @param data the data to send to the toAddress when invoking the transaction
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSig(
    address toAddress,
    uint256 value,
    bytes calldata data,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getNetworkId(),
        toAddress,
        value,
        data,
        expireTime,
        sequenceId
      )
    );
    address otherSigner = verifyMultiSig(
      toAddress,
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    // Success, send the transaction
    (bool success, ) = toAddress.call{ value: value }(data);
    require(success, 'Call execution failed');
    emit Transacted(
      msg.sender,
      otherSigner,
      operationHash,
      toAddress,
      value,
      data
    );
  }
  /**
   * Execute a batched multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   * The recipients and values to send are encoded in two arrays, where for index i, recipients[i] will be sent values[i].
   *
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigBatch(
    address[] calldata recipients,
    uint256[] calldata values,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    require(recipients.length != 0, 'Not enough recipients');
    require(
      recipients.length == values.length,
      'Unequal recipients and values'
    );
    require(recipients.length < 256, 'Too many recipients, max 255');
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getBatchNetworkId(),
        recipients,
        values,
        expireTime,
        sequenceId
      )
    );
    // the first parameter (toAddress) is used to ensure transactions in safe mode only go to a signer
    // if in safe mode, we should use normal sendMultiSig to recover, so this check will always fail if in safe mode
    require(!safeMode, 'Batch in safe mode');
    address otherSigner = verifyMultiSig(
      address(0x0),
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    batchTransfer(recipients, values);
    emit BatchTransacted(msg.sender, otherSigner, operationHash);
  }
  /**
   * Transfer funds in a batch to each of recipients
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to recipients.
   *  The recipient with index i in recipients array will be sent values[i].
   *  Thus, recipients and values must be the same length
   */
  function batchTransfer(
    address[] calldata recipients,
    uint256[] calldata values
  ) internal {
    for (uint256 i = 0; i < recipients.length; i++) {
      require(address(this).balance >= values[i], 'Insufficient funds');
      (bool success, ) = recipients[i].call{ value: values[i] }('');
      require(success, 'Call failed');
      emit BatchTransfer(msg.sender, recipients[i], values[i]);
    }
  }
  /**
   * Execute a multi-signature token transfer from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in tokens to be sent
   * @param tokenContractAddress the address of the erc20 token contract
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigToken(
    address toAddress,
    uint256 value,
    address tokenContractAddress,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getTokenNetworkId(),
        toAddress,
        value,
        tokenContractAddress,
        expireTime,
        sequenceId
      )
    );
    verifyMultiSig(toAddress, operationHash, signature, expireTime, sequenceId);
    TransferHelper.safeTransfer(tokenContractAddress, toAddress, value);
  }
  /**
   * Execute a token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushTokens(tokenContractAddress);
  }
  /**
   * Execute a ERC721 token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushERC721ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC721Token(tokenContractAddress, tokenId);
  }
  /**
   * Execute a ERC1155 batch token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   */
  function batchFlushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.batchFlushERC1155Tokens(tokenContractAddress, tokenIds);
  }
  /**
   * Execute a ERC1155 token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   * @param tokenId the token id associated with the ERC1155
   */
  function flushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC1155Tokens(tokenContractAddress, tokenId);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush721(autoFlush);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush1155(autoFlush);
  }
  /**
   * Do common multisig verification for both eth sends and erc20token transfers
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * returns address that has created the signature
   */
  function verifyMultiSig(
    address toAddress,
    bytes32 operationHash,
    bytes calldata signature,
    uint256 expireTime,
    uint256 sequenceId
  ) private returns (address) {
    address otherSigner = recoverAddressFromSignature(operationHash, signature);
    // Verify if we are in safe mode. In safe mode, the wallet can only send to signers
    require(!safeMode || isSigner(toAddress), 'External transfer in safe mode');
    // Verify that the transaction has not expired
    require(expireTime >= block.timestamp, 'Transaction expired');
    // Try to insert the sequence ID. Will revert if the sequence id was invalid
    tryInsertSequenceId(sequenceId);
    require(isSigner(otherSigner), 'Invalid signer');
    require(otherSigner != msg.sender, 'Signers cannot be equal');
    return otherSigner;
  }
  /**
   * ERC721 standard callback function for when a ERC721 is transfered.
   *
   * @param _operator The address of the nft contract
   * @param _from The address of the sender
   * @param _tokenId The token id of the nft
   * @param _data Additional data with no specified format, sent in call to `_to`
   */
  function onERC721Received(
    address _operator,
    address _from,
    uint256 _tokenId,
    bytes memory _data
  ) external virtual override returns (bytes4) {
    return this.onERC721Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155Received(
    address _operator,
    address _from,
    uint256 id,
    uint256 value,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155BatchReceived(
    address _operator,
    address _from,
    uint256[] calldata ids,
    uint256[] calldata values,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155BatchReceived.selector;
  }
  /**
   * Irrevocably puts contract into safe mode. When in this mode, transactions may only be sent to signing addresses.
   */
  function activateSafeMode() external onlySigner {
    safeMode = true;
    emit SafeModeActivated(msg.sender);
  }
  /**
   * Gets signer's address using ecrecover
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * returns address recovered from the signature
   */
  function recoverAddressFromSignature(
    bytes32 operationHash,
    bytes memory signature
  ) private pure returns (address) {
    require(signature.length == 65, 'Invalid signature - wrong length');
    // We need to unpack the signature, which is given as an array of 65 bytes (like eth.sign)
    bytes32 r;
    bytes32 s;
    uint8 v;
    // solhint-disable-next-line
    assembly {
      r := mload(add(signature, 32))
      s := mload(add(signature, 64))
      v := and(mload(add(signature, 65)), 255)
    }
    if (v < 27) {
      v += 27; // Ethereum versions are 27 or 28 as opposed to 0 or 1 which is submitted by some signing libs
    }
    // protect against signature malleability
    // S value must be in the lower half orader
    // reference: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/051d340171a93a3d401aaaea46b4b62fa81e5d7c/contracts/cryptography/ECDSA.sol#L53
    require(
      uint256(s) <=
        0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
      "ECDSA: invalid signature 's' value"
    );
    // note that this returns 0 if the signature is invalid
    // Since 0x0 can never be a signer, when the recovered signer address
    // is checked against our signer list, that 0x0 will cause an invalid signer failure
    return ecrecover(operationHash, v, r, s);
  }
  /**
   * Verify that the sequence id has not been used before and inserts it. Throws if the sequence ID was not accepted.
   * We collect a window of up to 10 recent sequence ids, and allow any sequence id that is not in the window and
   * greater than the minimum element in the window.
   * @param sequenceId to insert into array of stored ids
   */
  function tryInsertSequenceId(uint256 sequenceId) private onlySigner {
    // Keep a pointer to the lowest value element in the window
    uint256 lowestValueIndex = 0;
    // fetch recentSequenceIds into memory for function context to avoid unnecessary sloads
      uint256[SEQUENCE_ID_WINDOW_SIZE] memory _recentSequenceIds
     = recentSequenceIds;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      require(_recentSequenceIds[i] != sequenceId, 'Sequence ID already used');
      if (_recentSequenceIds[i] < _recentSequenceIds[lowestValueIndex]) {
        lowestValueIndex = i;
      }
    }
    // The sequence ID being used is lower than the lowest value in the window
    // so we cannot accept it as it may have been used before
    require(
      sequenceId > _recentSequenceIds[lowestValueIndex],
      'Sequence ID below window'
    );
    // Block sequence IDs which are much higher than the lowest value
    // This prevents people blocking the contract by using very large sequence IDs quickly
    require(
      sequenceId <=
        (_recentSequenceIds[lowestValueIndex] + MAX_SEQUENCE_ID_INCREASE),
      'Sequence ID above maximum'
    );
    recentSequenceIds[lowestValueIndex] = sequenceId;
  }
  /**
   * Gets the next available sequence ID for signing when using executeAndConfirm
   * returns the sequenceId one higher than the highest currently stored
   */
  function getNextSequenceId() external view returns (uint256) {
    uint256 highestSequenceId = 0;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      if (recentSequenceIds[i] > highestSequenceId) {
        highestSequenceId = recentSequenceIds[i];
      }
    }
    return highestSequenceId + 1;
  }
}
// SPDX-License-Identifier: GPL-3.0-or-later
// source: https://github.com/Uniswap/solidity-lib/blob/master/contracts/libraries/TransferHelper.sol
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/Address.sol';
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
  function safeTransfer(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transfer(address,uint256)')));
    (bool success, bytes memory data) = token.call(
      abi.encodeWithSelector(0xa9059cbb, to, value)
    );
    require(
      success && (data.length == 0 || abi.decode(data, (bool))),
      'TransferHelper::safeTransfer: transfer failed'
    );
  }
  function safeTransferFrom(
    address token,
    address from,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
    (bool success, bytes memory returndata) = token.call(
      abi.encodeWithSelector(0x23b872dd, from, to, value)
    );
    Address.verifyCallResult(
      success,
      returndata,
      'TransferHelper::transferFrom: transferFrom failed'
    );
  }
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.10;
/**
 * Contract that exposes the needed erc20 token functions
 */
abstract contract ERC20Interface {
  // Send _value amount of tokens to address _to
  function transfer(address _to, uint256 _value)
    public
    virtual
    returns (bool success);
  // Get the account balance of another account with address _owner
  function balanceOf(address _owner)
    public
    virtual
    view
    returns (uint256 balance);
}
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
interface IForwarder is IERC165 {
  /**
   * Sets the autoflush721 parameter.
   *
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(bool autoFlush) external;
  /**
   * Sets the autoflush1155 parameter.
   *
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(bool autoFlush) external;
  /**
   * Execute a token transfer of the full balance from the forwarder token to the parent address
   *
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushTokens(address tokenContractAddress) external;
  /**
   * Execute a nft transfer from the forwarder to the parent address
   *
   * @param tokenContractAddress the address of the ERC721 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC721Token(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC1155Tokens(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a batch nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenIds The token ids of the nfts
   */
  function batchFlushERC1155Tokens(
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../IERC1155Receiver.sol";
import "../../../utils/introspection/ERC165.sol";
/**
 * @dev _Available since v3.1._
 */
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;
    // Token name
    string private _name;
    // Token symbol
    string private _symbol;
    // Mapping from token ID to owner address
    mapping (uint256 => address) private _owners;
    // Mapping owner address to token count
    mapping (address => uint256) private _balances;
    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;
    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;
    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC721).interfaceId
            || interfaceId == type(IERC721Metadata).interfaceId
            || super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }
    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }
    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }
    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }
    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0
            ? string(abi.encodePacked(baseURI, tokenId.toString()))
            : '';
    }
    /**
     * @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
     * in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }
    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");
        require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );
        _approve(to, tokenId);
    }
    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");
        return _tokenApprovals[tokenId];
    }
    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");
        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }
    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }
    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _transfer(from, to, tokenId);
    }
    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }
    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }
    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }
    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }
    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }
    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
        _mint(to, tokenId);
        require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }
    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");
        _beforeTokenTransfer(address(0), to, tokenId);
        _balances[to] += 1;
        _owners[tokenId] = to;
        emit Transfer(address(0), to, tokenId);
    }
    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);
        _beforeTokenTransfer(owner, address(0), tokenId);
        // Clear approvals
        _approve(address(0), tokenId);
        _balances[owner] -= 1;
        delete _owners[tokenId];
        emit Transfer(owner, address(0), tokenId);
    }
    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");
        _beforeTokenTransfer(from, to, tokenId);
        // Clear approvals from the previous owner
        _approve(address(0), tokenId);
        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;
        emit Transfer(from, to, tokenId);
    }
    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }
    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        private returns (bool)
    {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver(to).onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    // solhint-disable-next-line no-inline-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }
    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    /**
      * @dev Safely transfers `tokenId` token from `from` to `to`.
      *
      * Requirements:
      *
      * - `from` cannot be the zero address.
      * - `to` cannot be the zero address.
      * - `tokenId` token must exist and be owned by `from`.
      * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
      * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
      *
      * Emits a {Transfer} event.
      */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
 * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
 * enumerability of all the token ids in the contract as well as all token ids owned by each
 * account.
 */
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;
    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;
    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
        return interfaceId == type(IERC721Enumerable).interfaceId
            || super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }
    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _allTokens.length;
    }
    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }
    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
        super._beforeTokenTransfer(from, to, tokenId);
        if (from == address(0)) {
            _addTokenToAllTokensEnumeration(tokenId);
        } else if (from != to) {
            _removeTokenFromOwnerEnumeration(from, tokenId);
        }
        if (to == address(0)) {
            _removeTokenFromAllTokensEnumeration(tokenId);
        } else if (to != from) {
            _addTokenToOwnerEnumeration(to, tokenId);
        }
    }
    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        uint256 length = ERC721.balanceOf(to);
        _ownedTokens[to][length] = tokenId;
        _ownedTokensIndex[tokenId] = length;
    }
    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }
    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).
        uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
        uint256 tokenIndex = _ownedTokensIndex[tokenId];
        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }
        // This also deletes the contents at the last position of the array
        delete _ownedTokensIndex[tokenId];
        delete _ownedTokens[from][lastTokenIndex];
    }
    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).
        uint256 lastTokenIndex = _allTokens.length - 1;
        uint256 tokenIndex = _allTokensIndex[tokenId];
        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];
        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        // This also deletes the contents at the last position of the array
        delete _allTokensIndex[tokenId];
        _allTokens.pop();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant alphabet = "0123456789abcdef";
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = alphabet[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "openzeppelin-solidity/contracts/token/ERC721/ERC721.sol";
import "openzeppelin-solidity/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "openzeppelin-solidity/contracts/access/Ownable.sol";
import "openzeppelin-solidity/contracts/utils/math/SafeMath.sol";
import "openzeppelin-solidity/contracts/utils/Strings.sol";
import "./common/meta-transactions/ContentMixin.sol";
import "./common/meta-transactions/NativeMetaTransaction.sol";
contract OwnableDelegateProxy {}
contract ProxyRegistry {
    mapping(address => OwnableDelegateProxy) public proxies;
}
/**
 * @title ERC721Tradable
 * ERC721Tradable - ERC721 contract that whitelists a trading address, and has minting functionality.
 */
abstract contract ERC721Tradable is ContextMixin, ERC721Enumerable, NativeMetaTransaction, Ownable {
    using SafeMath for uint256;
    address proxyRegistryAddress;
    uint256 private _currentTokenId = 0;
    constructor(
        string memory _name,
        string memory _symbol,
        address _proxyRegistryAddress
    ) ERC721(_name, _symbol) {
        proxyRegistryAddress = _proxyRegistryAddress;
        _initializeEIP712(_name);
    }
    /**
     * @dev Mints a token to an address with a tokenURI.
     * @param _to address of the future owner of the token
     * @return uint256 for the current token ID
     */
    function mintTo(address _to) internal returns (uint256) {
        uint256 newTokenId = _getNextTokenId();
        _mint(_to, newTokenId);
        _incrementTokenId();
        return newTokenId;
    }
    /**
     * @dev calculates the next token ID based on value of _currentTokenId
     * @return uint256 for the next token ID
     */
    function _getNextTokenId() private view returns (uint256) {
        return _currentTokenId.add(1);
    }
    /**
     * @dev increments the value of _currentTokenId
     */
    function _incrementTokenId() private {
        _currentTokenId++;
    }
    function baseTokenURI() virtual public view returns (string memory);
    function tokenURI(uint256 _tokenId) override public view returns (string memory) {
        return string(abi.encodePacked(baseTokenURI(), Strings.toString(_tokenId)));
    }
    /**
     * Override isApprovedForAll to whitelist user's OpenSea proxy accounts to enable gas-less listings.
     */
    function isApprovedForAll(address owner, address operator)
        override
        public
        view
        returns (bool)
    {
        // Whitelist OpenSea proxy contract for easy trading.
        ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
        if (address(proxyRegistry.proxies(owner)) == operator) {
            return true;
        }
        return super.isApprovedForAll(owner, operator);
    }
    /**
     * This is used instead of msg.sender as transactions won't be sent by the original token owner, but by OpenSea.
     */
    function _msgSender()
        internal
        override
        view
        returns (address sender)
    {
        return ContextMixin.msgSender();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ERC721Tradable.sol";
import "openzeppelin-solidity/contracts/utils/math/SafeMath.sol";
abstract contract NFT {
    function balanceOf(address owner)
        public
        view
        virtual
        returns (uint256 balance);
}
abstract contract MintPass {
    function balanceOf(address owner, uint256 id)
        public
        view
        virtual
        returns (uint256 balance);
}
/**
 * @title Paradise
 * Paradise - a contract for Paradise Trippies
 */
contract Paradise is ERC721Tradable {
    using SafeMath for uint256;
    bool public preSaleIsActive = true;
    bool public saleIsActive = false;
    address constant WALLET1 = 0xffe5CBCDdF2bd1b4Dc3c00455d4cdCcf20F77587;
    address constant WALLET2 = 0xA6AAEa8BFA339f602906413CfD22f281eb480D6F;
    uint256 public preSalePhase = 1;
    uint256 public maxSupply = 10000;
    uint256 public preSalePrice = 70000000000000000;
    uint256 public pubSalePrice = 70000000000000000;
    uint256 public maxPerWallet = 3;
    uint256 public maxPerTransaction = 5;
    string _baseTokenURI;
    address[] public contracts;
    MintPass mintpass;
    constructor(
        address _proxyRegistryAddress,
        string memory _name,
        string memory _symbol,
        address _mintPassAddress
    ) ERC721Tradable(_name, _symbol, _proxyRegistryAddress) {
        mintpass = MintPass(_mintPassAddress);
    }
    struct ContractWhitelist {
        bool exists;
        NFT nft;
        uint256 usedSpots;
        uint256 availSpots;
    }
    mapping(address => ContractWhitelist) public contractWhitelist;
    struct Minter {
        bool exists;
        uint256 hasMintedByMintPass;
        uint256 hasMintedByContract;
    }
    mapping(address => Minter) public minters;
    function addContractToWhitelist(address _address, uint256 _availSpots)
        public
        onlyOwner
        returns (bool)
    {
        (bool _isWhitelisted, ) = isWhitelistedContract(_address);
        require(!_isWhitelisted,  "Contract already whitelisted.");
        contractWhitelist[_address].exists = true;
        contractWhitelist[_address].nft = NFT(_address);
        contractWhitelist[_address].availSpots = _availSpots;
        contracts.push(_address);
        return true;
    }
    function updateContractWhitelist(address _address, uint256 _availSpots)
        public
        onlyOwner
        returns (bool)
    {
        (bool _isWhitelisted, ) = isWhitelistedContract(_address);
        require(_isWhitelisted,  "Contract is not whitelisted.");
        contractWhitelist[_address].availSpots = _availSpots;
        return true;
    }
    function removeContractFromWhitelist(address _address)
        public
        onlyOwner
        returns (bool)
    {
        (bool _isWhitelisted, uint256 i) = isWhitelistedContract(_address);
        require(_isWhitelisted, "Contract is not whitelisted.");
        contracts[i] = contracts[contracts.length - 1];
        contracts.pop();
        delete contractWhitelist[_address];
        return true;
    }
    function isWhitelisted(address _address)
        public
        view
        returns (bool)
    {
        if (preSaleIsActive && preSalePhase == 1) {
            return isWhitelistedByMintPass(_address);
        }
        if (preSaleIsActive && preSalePhase == 2) {
            (bool _isWhitelisted, ) = isWhitelistedByContract(_address);
            return _isWhitelisted;
        }
        return false;
    }
    function isWhitelistedByContract(address _address)
        public
        view
        returns (bool, uint256)
    {
        for (uint256 i = 0; i < contracts.length; i += 1) {
            if (
                contractWhitelist[contracts[i]].nft.balanceOf(_address) > 0 &&
                contractWhitelist[contracts[i]].usedSpots < contractWhitelist[contracts[i]].availSpots
            ) {
                return (true, i);
            }
        }
        return (false, 0);
    }
    function isWhitelistedByMintPass(address _address)
        public
        view
        returns (bool)
    {
        return mintpass.balanceOf(_address, 1) > 0;
    }
    function isWhitelistedContract(address _address)
        internal
        view
        returns (bool, uint256)
    {
        for (uint256 i = 0; i < contracts.length; i += 1) {
            if (_address == contracts[i] && contractWhitelist[_address].exists) return (true, i);
        }
        return (false, 0);
    }
    function setPubSalePrice(uint256 _price) external onlyOwner {
        pubSalePrice = _price;
    }
    function setPreSalePrice(uint256 _price) external onlyOwner {
        preSalePrice = _price;
    }
    function baseTokenURI() override virtual public view returns (string memory) {
        return _baseTokenURI;
    }
    function setBaseTokenURI(string memory _uri) public onlyOwner {
        _baseTokenURI = _uri;
    }
    function setMaxPerWallet(uint256 _maxToMint) external onlyOwner {
        maxPerWallet = _maxToMint;
    }
    function setMaxPerTransaction(uint256 _maxToMint) external onlyOwner {
        maxPerTransaction = _maxToMint;
    }
    function flipSaleState() public onlyOwner {
        saleIsActive = !saleIsActive;
    }
    function flipPreSaleState() public onlyOwner {
        preSaleIsActive = !preSaleIsActive;
    }
    function setPreSalePhase(uint8 _phase) public onlyOwner {
        // 1 = mintpasses, 2 = wl contracts
        require(_phase == 1 || _phase == 2, "Invalid presale phase.");
        preSalePhase = _phase;
    }
    function reserve(address _address, uint256 _quantity) public onlyOwner {
        uint i;
        for (i = 0; i < _quantity; i++) {
            mintTo(_address);
        }
    }
    function mint(uint _quantity) public payable {
        require(saleIsActive, "Sale is not active.");
        require(totalSupply() <= maxSupply, "Sold out.");
        require(totalSupply().add(_quantity) <= maxSupply, "Requested quantity would exceed total supply.");
        if(preSaleIsActive) {
            require(preSalePrice.mul(_quantity) <= msg.value, "ETH sent is incorrect.");
            require(_quantity <= maxPerWallet, "Exceeds wallet presale limit.");
            if (preSalePhase == 1) {
                require(isWhitelistedByMintPass(msg.sender), "You do not have a MintPass.");
                require(
                    minters[msg.sender].hasMintedByMintPass.add(_quantity) <=
                        maxPerWallet,
                    "Exceeds per wallet presale limit."
                );
                if (!minters[msg.sender].exists) minters[msg.sender].exists = true;
                minters[msg.sender].hasMintedByMintPass = minters[msg.sender].hasMintedByMintPass.add(
                    _quantity
                );
            }
            if (preSalePhase == 2) {
                (bool _isWhitelisted, uint256 i) = isWhitelistedByContract(msg.sender);
                require(_isWhitelisted, "You are not a holder of a whitelisted collection with available spots remaining.");
                require(
                    minters[msg.sender].hasMintedByContract.add(_quantity) <=
                        maxPerWallet,
                    "Exceeds per wallet presale limit."
                );
                if (minters[msg.sender].exists) {
                    if (minters[msg.sender].hasMintedByContract == 0) {
                        contractWhitelist[contracts[i]].usedSpots = contractWhitelist[contracts[i]].usedSpots.add(1);
                    }
                    minters[msg.sender].hasMintedByContract = minters[msg.sender].hasMintedByContract.add(
                        _quantity
                    );
                } else {
                    minters[msg.sender].exists = true;
                    minters[msg.sender].hasMintedByContract = _quantity;
                    contractWhitelist[contracts[i]].usedSpots = contractWhitelist[contracts[i]].usedSpots.add(1);
                }
            }
        } else {
            require(pubSalePrice.mul(_quantity) <= msg.value, "ETH sent is incorrect.");
            require(_quantity <= maxPerTransaction, "Exceeds per transaction limit for public sale.");
        }
        for(uint i = 0; i < _quantity; i++) {
            mintTo(msg.sender);
        }
    }
    function withdraw() external onlyOwner {
        uint256 balance = address(this).balance;
        uint256 wallet1Balance = balance.mul(10).div(100);
        uint256 wallet2Balance = balance.mul(19).div(100);
        payable(WALLET1).transfer(wallet1Balance);
        payable(WALLET2).transfer(wallet2Balance);
        payable(msg.sender).transfer(
            balance.sub(wallet1Balance.add(wallet2Balance))
        );
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
abstract contract ContextMixin {
    function msgSender()
        internal
        view
        returns (address payable sender)
    {
        if (msg.sender == address(this)) {
            bytes memory array = msg.data;
            uint256 index = msg.data.length;
            assembly {
                // Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
                sender := and(
                    mload(add(array, index)),
                    0xffffffffffffffffffffffffffffffffffffffff
                )
            }
        } else {
            sender = payable(msg.sender);
        }
        return sender;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {Initializable} from "./Initializable.sol";
contract EIP712Base is Initializable {
    struct EIP712Domain {
        string name;
        string version;
        address verifyingContract;
        bytes32 salt;
    }
    string constant public ERC712_VERSION = "1";
    bytes32 internal constant EIP712_DOMAIN_TYPEHASH = keccak256(
        bytes(
            "EIP712Domain(string name,string version,address verifyingContract,bytes32 salt)"
        )
    );
    bytes32 internal domainSeperator;
    // supposed to be called once while initializing.
    // one of the contracts that inherits this contract follows proxy pattern
    // so it is not possible to do this in a constructor
    function _initializeEIP712(
        string memory name
    )
        internal
        initializer
    {
        _setDomainSeperator(name);
    }
    function _setDomainSeperator(string memory name) internal {
        domainSeperator = keccak256(
            abi.encode(
                EIP712_DOMAIN_TYPEHASH,
                keccak256(bytes(name)),
                keccak256(bytes(ERC712_VERSION)),
                address(this),
                bytes32(getChainId())
            )
        );
    }
    function getDomainSeperator() public view returns (bytes32) {
        return domainSeperator;
    }
    function getChainId() public view returns (uint256) {
        uint256 id;
        assembly {
            id := chainid()
        }
        return id;
    }
    /**
     * Accept message hash and returns hash message in EIP712 compatible form
     * So that it can be used to recover signer from signature signed using EIP712 formatted data
     * https://eips.ethereum.org/EIPS/eip-712
     * "\\\\x19" makes the encoding deterministic
     * "\\\\x01" is the version byte to make it compatible to EIP-191
     */
    function toTypedMessageHash(bytes32 messageHash)
        internal
        view
        returns (bytes32)
    {
        return
            keccak256(
                abi.encodePacked("\\x19\\x01", getDomainSeperator(), messageHash)
            );
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract Initializable {
    bool inited = false;
    modifier initializer() {
        require(!inited, "already inited");
        _;
        inited = true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {SafeMath} from  "openzeppelin-solidity/contracts/utils/math/SafeMath.sol";
import {EIP712Base} from "./EIP712Base.sol";
contract NativeMetaTransaction is EIP712Base {
    using SafeMath for uint256;
    bytes32 private constant META_TRANSACTION_TYPEHASH = keccak256(
        bytes(
            "MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
        )
    );
    event MetaTransactionExecuted(
        address userAddress,
        address payable relayerAddress,
        bytes functionSignature
    );
    mapping(address => uint256) nonces;
    /*
     * Meta transaction structure.
     * No point of including value field here as if user is doing value transfer then he has the funds to pay for gas
     * He should call the desired function directly in that case.
     */
    struct MetaTransaction {
        uint256 nonce;
        address from;
        bytes functionSignature;
    }
    function executeMetaTransaction(
        address userAddress,
        bytes memory functionSignature,
        bytes32 sigR,
        bytes32 sigS,
        uint8 sigV
    ) public payable returns (bytes memory) {
        MetaTransaction memory metaTx = MetaTransaction({
            nonce: nonces[userAddress],
            from: userAddress,
            functionSignature: functionSignature
        });
        require(
            verify(userAddress, metaTx, sigR, sigS, sigV),
            "Signer and signature do not match"
        );
        // increase nonce for user (to avoid re-use)
        nonces[userAddress] = nonces[userAddress].add(1);
        emit MetaTransactionExecuted(
            userAddress,
            payable(msg.sender),
            functionSignature
        );
        // Append userAddress and relayer address at the end to extract it from calling context
        (bool success, bytes memory returnData) = address(this).call(
            abi.encodePacked(functionSignature, userAddress)
        );
        require(success, "Function call not successful");
        return returnData;
    }
    function hashMetaTransaction(MetaTransaction memory metaTx)
        internal
        pure
        returns (bytes32)
    {
        return
            keccak256(
                abi.encode(
                    META_TRANSACTION_TYPEHASH,
                    metaTx.nonce,
                    metaTx.from,
                    keccak256(metaTx.functionSignature)
                )
            );
    }
    function getNonce(address user) public view returns (uint256 nonce) {
        nonce = nonces[user];
    }
    function verify(
        address signer,
        MetaTransaction memory metaTx,
        bytes32 sigR,
        bytes32 sigS,
        uint8 sigV
    ) internal view returns (bool) {
        require(signer != address(0), "NativeMetaTransaction: INVALID_SIGNER");
        return
            signer ==
            ecrecover(
                toTypedMessageHash(hashMetaTransaction(metaTx)),
                sigV,
                sigR,
                sigS
            );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import { Consideration } from "./lib/Consideration.sol";
/**
 * @title Seaport
 * @custom:version 1.6
 * @author 0age (0age.eth)
 * @custom:coauthor d1ll0n (d1ll0n.eth)
 * @custom:coauthor transmissions11 (t11s.eth)
 * @custom:coauthor James Wenzel (emo.eth)
 * @custom:coauthor Daniel Viau (snotrocket.eth)
 * @custom:contributor Kartik (slokh.eth)
 * @custom:contributor LeFevre (lefevre.eth)
 * @custom:contributor Joseph Schiarizzi (CupOJoseph.eth)
 * @custom:contributor Aspyn Palatnick (stuckinaboot.eth)
 * @custom:contributor Stephan Min (stephanm.eth)
 * @custom:contributor Ryan Ghods (ralxz.eth)
 * @custom:contributor hack3r-0m (hack3r-0m.eth)
 * @custom:contributor Diego Estevez (antidiego.eth)
 * @custom:contributor Chomtana (chomtana.eth)
 * @custom:contributor Saw-mon and Natalie (sawmonandnatalie.eth)
 * @custom:contributor 0xBeans (0xBeans.eth)
 * @custom:contributor 0x4non (punkdev.eth)
 * @custom:contributor Laurence E. Day (norsefire.eth)
 * @custom:contributor vectorized.eth (vectorized.eth)
 * @custom:contributor karmacoma (karmacoma.eth)
 * @custom:contributor horsefacts (horsefacts.eth)
 * @custom:contributor UncarvedBlock (uncarvedblock.eth)
 * @custom:contributor Zoraiz Mahmood (zorz.eth)
 * @custom:contributor William Poulin (wpoulin.eth)
 * @custom:contributor Rajiv Patel-O'Connor (rajivpoc.eth)
 * @custom:contributor tserg (tserg.eth)
 * @custom:contributor cygaar (cygaar.eth)
 * @custom:contributor Meta0xNull (meta0xnull.eth)
 * @custom:contributor gpersoon (gpersoon.eth)
 * @custom:contributor Matt Solomon (msolomon.eth)
 * @custom:contributor Weikang Song (weikangs.eth)
 * @custom:contributor zer0dot (zer0dot.eth)
 * @custom:contributor Mudit Gupta (mudit.eth)
 * @custom:contributor leonardoalt (leoalt.eth)
 * @custom:contributor cmichel (cmichel.eth)
 * @custom:contributor PraneshASP (pranesh.eth)
 * @custom:contributor JasperAlexander (jasperalexander.eth)
 * @custom:contributor Ellahi (ellahi.eth)
 * @custom:contributor zaz (1zaz1.eth)
 * @custom:contributor berndartmueller (berndartmueller.eth)
 * @custom:contributor dmfxyz (dmfxyz.eth)
 * @custom:contributor daltoncoder (dontkillrobots.eth)
 * @custom:contributor 0xf4ce (0xf4ce.eth)
 * @custom:contributor phaze (phaze.eth)
 * @custom:contributor hrkrshnn (hrkrshnn.eth)
 * @custom:contributor axic (axic.eth)
 * @custom:contributor leastwood (leastwood.eth)
 * @custom:contributor 0xsanson (sanson.eth)
 * @custom:contributor blockdev (blockd3v.eth)
 * @custom:contributor fiveoutofnine (fiveoutofnine.eth)
 * @custom:contributor shuklaayush (shuklaayush.eth)
 * @custom:contributor dravee (dravee.eth)
 * @custom:contributor 0xPatissier
 * @custom:contributor pcaversaccio
 * @custom:contributor David Eiber
 * @custom:contributor csanuragjain
 * @custom:contributor sach1r0
 * @custom:contributor twojoy0
 * @custom:contributor ori_dabush
 * @custom:contributor Daniel Gelfand
 * @custom:contributor okkothejawa
 * @custom:contributor FlameHorizon
 * @custom:contributor vdrg
 * @custom:contributor dmitriia
 * @custom:contributor bokeh-eth
 * @custom:contributor asutorufos
 * @custom:contributor rfart(rfa)
 * @custom:contributor Riley Holterhus
 * @custom:contributor big-tech-sux
 * @notice Seaport is a generalized native token/ERC20/ERC721/ERC1155
 *         marketplace with lightweight methods for common routes as well as
 *         more flexible methods for composing advanced orders or groups of
 *         orders. Each order contains an arbitrary number of items that may be
 *         spent (the "offer") along with an arbitrary number of items that must
 *         be received back by the indicated recipients (the "consideration").
 */
contract Seaport is Consideration {
    /**
     * @notice Derive and set hashes, reference chainId, and associated domain
     *         separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) Consideration(conduitController) {}
    /**
     * @dev Internal pure function to retrieve and return the name of this
     *      contract.
     *
     * @return The name of this contract.
     */
    function _name() internal pure override returns (string memory) {
        // Return the name of the contract.
        assembly {
            mstore(0x20, 0x20)
            mstore(0x47, 0x07536561706f7274)
            return(0x20, 0x60)
        }
    }
    /**
     * @dev Internal pure function to retrieve the name of this contract as a
     *      string that will be used to derive the name hash in the constructor.
     *
     * @return The name of this contract as a string.
     */
    function _nameString() internal pure override returns (string memory) {
        // Return the name of the contract.
        return "Seaport";
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ConsiderationInterface
} from "seaport-types/src/interfaces/ConsiderationInterface.sol";
import {
    AdvancedOrder,
    BasicOrderParameters,
    CriteriaResolver,
    Execution,
    Fulfillment,
    FulfillmentComponent,
    Order,
    OrderComponents
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import { OrderCombiner } from "./OrderCombiner.sol";
import {
    CalldataStart,
    CalldataPointer
} from "seaport-types/src/helpers/PointerLibraries.sol";
import {
    Offset_fulfillAdvancedOrder_criteriaResolvers,
    Offset_fulfillAvailableAdvancedOrders_cnsdrationFlflmnts,
    Offset_fulfillAvailableAdvancedOrders_criteriaResolvers,
    Offset_fulfillAvailableAdvancedOrders_offerFulfillments,
    Offset_fulfillAvailableOrders_considerationFulfillments,
    Offset_fulfillAvailableOrders_offerFulfillments,
    Offset_matchAdvancedOrders_criteriaResolvers,
    Offset_matchAdvancedOrders_fulfillments,
    Offset_matchOrders_fulfillments,
    OrderParameters_counter_offset
} from "seaport-types/src/lib/ConsiderationConstants.sol";
/**
 * @title Consideration
 * @author 0age (0age.eth)
 * @custom:coauthor d1ll0n (d1ll0n.eth)
 * @custom:coauthor transmissions11 (t11s.eth)
 * @custom:coauthor James Wenzel (emo.eth)
 * @custom:coauthor Daniel Viau (snotrocket.eth)
 * @custom:version 1.6
 * @notice Consideration is a generalized native token/ERC20/ERC721/ERC1155
 *         marketplace that provides lightweight methods for common routes as
 *         well as more flexible methods for composing advanced orders or groups
 *         of orders. Each order contains an arbitrary number of items that may
 *         be spent (the "offer") along with an arbitrary number of items that
 *         must be received back by the indicated recipients (the
 *         "consideration").
 */
contract Consideration is ConsiderationInterface, OrderCombiner {
    /**
     * @notice Derive and set hashes, reference chainId, and associated domain
     *         separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) OrderCombiner(conduitController) {}
    /**
     * @notice Accept native token transfers during execution that may then be
     *         used to facilitate native token transfers, where any tokens that
     *         remain will be transferred to the caller. Native tokens are only
     *         acceptable mid-fulfillment (and not during basic fulfillment).
     */
    receive() external payable {
        // Ensure the reentrancy guard is currently set to accept native tokens.
        _assertAcceptingNativeTokens();
    }
    /**
     * @notice Fulfill an order offering an ERC20, ERC721, or ERC1155 item by
     *         supplying Ether (or other native tokens), ERC20 tokens, an ERC721
     *         item, or an ERC1155 item as consideration. Six permutations are
     *         supported: Native token to ERC721, Native token to ERC1155, ERC20
     *         to ERC721, ERC20 to ERC1155, ERC721 to ERC20, and ERC1155 to
     *         ERC20 (with native tokens supplied as msg.value). For an order to
     *         be eligible for fulfillment via this method, it must contain a
     *         single offer item (though that item may have a greater amount if
     *         the item is not an ERC721). An arbitrary number of "additional
     *         recipients" may also be supplied which will each receive native
     *         tokens or ERC20 items from the fulfiller as consideration. Refer
     *         to the documentation for a more comprehensive summary of how to
     *         utilize this method and what orders are compatible with it.
     *
     * @custom:param parameters Additional information on the fulfilled order.
     *                          Note that the offerer and the fulfiller must
     *                          first approve this contract (or their chosen
     *                          conduit if indicated) before any tokens can be
     *                          transferred. Also note that contract recipients
     *                          of ERC1155 consideration items must implement
     *                          `onERC1155Received` to receive those items.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillBasicOrder(
        /**
         * @custom:name parameters
         */
        BasicOrderParameters calldata
    ) external payable override returns (bool fulfilled) {
        // Validate and fulfill the basic order.
        fulfilled = _validateAndFulfillBasicOrder();
    }
    /**
     * @notice Fulfill an order offering an ERC20, ERC721, or ERC1155 item by
     *         supplying Ether (or other native tokens), ERC20 tokens, an ERC721
     *         item, or an ERC1155 item as consideration. Six permutations are
     *         supported: Native token to ERC721, Native token to ERC1155, ERC20
     *         to ERC721, ERC20 to ERC1155, ERC721 to ERC20, and ERC1155 to
     *         ERC20 (with native tokens supplied as msg.value). For an order to
     *         be eligible for fulfillment via this method, it must contain a
     *         single offer item (though that item may have a greater amount if
     *         the item is not an ERC721). An arbitrary number of "additional
     *         recipients" may also be supplied which will each receive native
     *         tokens or ERC20 items from the fulfiller as consideration. Refer
     *         to the documentation for a more comprehensive summary of how to
     *         utilize this method and what orders are compatible with it. Note
     *         that this function costs less gas than `fulfillBasicOrder` due to
     *         the zero bytes in the function selector (0x00000000) which also
     *         results in earlier function dispatch.
     *
     * @custom:param parameters Additional information on the fulfilled order.
     *                          Note that the offerer and the fulfiller must
     *                          first approve this contract (or their chosen
     *                          conduit if indicated) before any tokens can be
     *                          transferred. Also note that contract recipients
     *                          of ERC1155 consideration items must implement
     *                          `onERC1155Received` to receive those items.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillBasicOrder_efficient_6GL6yc(
        /**
         * @custom:name parameters
         */
        BasicOrderParameters calldata
    ) external payable override returns (bool fulfilled) {
        // Validate and fulfill the basic order.
        fulfilled = _validateAndFulfillBasicOrder();
    }
    /**
     * @notice Fulfill an order with an arbitrary number of items for offer and
     *         consideration. Note that this function does not support
     *         criteria-based orders or partial filling of orders (though
     *         filling the remainder of a partially-filled order is supported).
     *
     * @custom:param order        The order to fulfill. Note that both the
     *                            offerer and the fulfiller must first approve
     *                            this contract (or the corresponding conduit if
     *                            indicated) to transfer any relevant tokens on
     *                            their behalf and that contracts must implement
     *                            `onERC1155Received` to receive ERC1155 tokens
     *                            as consideration.
     * @param fulfillerConduitKey A bytes32 value indicating what conduit, if
     *                            any, to source the fulfiller's token approvals
     *                            from. The zero hash signifies that no conduit
     *                            should be used (and direct approvals set on
     *                            this contract).
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillOrder(
        /**
         * @custom:name order
         */
        Order calldata,
        bytes32 fulfillerConduitKey
    ) external payable override returns (bool fulfilled) {
        // Convert order to "advanced" order, then validate and fulfill it.
        fulfilled = _validateAndFulfillAdvancedOrder(
            _toAdvancedOrderReturnType(_decodeOrderAsAdvancedOrder)(
                CalldataStart.pptr()
            ),
            new CriteriaResolver[](0), // No criteria resolvers supplied.
            fulfillerConduitKey,
            msg.sender
        );
    }
    /**
     * @notice Fill an order, fully or partially, with an arbitrary number of
     *         items for offer and consideration alongside criteria resolvers
     *         containing specific token identifiers and associated proofs.
     *
     * @custom:param advancedOrder     The order to fulfill along with the
     *                                 fraction of the order to attempt to fill.
     *                                 Note that both the offerer and the
     *                                 fulfiller must first approve this
     *                                 contract (or their conduit if indicated
     *                                 by the order) to transfer any relevant
     *                                 tokens on their behalf and that contracts
     *                                 must implement `onERC1155Received` to
     *                                 receive ERC1155 tokens as consideration.
     *                                 Also note that all offer and
     *                                 consideration components must have no
     *                                 remainder after multiplication of the
     *                                 respective amount with the supplied
     *                                 fraction for the partial fill to be
     *                                 considered valid.
     * @custom:param criteriaResolvers An array where each element contains a
     *                                 reference to a specific offer or
     *                                 consideration, a token identifier, and a
     *                                 proof that the supplied token identifier
     *                                 is contained in the merkle root held by
     *                                 the item in question's criteria element.
     *                                 Note that an empty criteria indicates
     *                                 that any (transferable) token identifier
     *                                 on the token in question is valid and
     *                                 that no associated proof needs to be
     *                                 supplied.
     * @param fulfillerConduitKey      A bytes32 value indicating what conduit,
     *                                 if any, to source the fulfiller's token
     *                                 approvals from. The zero hash signifies
     *                                 that no conduit should be used (and
     *                                 direct approvals set on this contract).
     * @param recipient                The intended recipient for all received
     *                                 items, with `address(0)` indicating that
     *                                 the caller should receive the items.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillAdvancedOrder(
        /**
         * @custom:name advancedOrder
         */
        AdvancedOrder calldata,
        /**
         * @custom:name criteriaResolvers
         */
        CriteriaResolver[] calldata,
        bytes32 fulfillerConduitKey,
        address recipient
    ) external payable override returns (bool fulfilled) {
        // Validate and fulfill the order.
        fulfilled = _validateAndFulfillAdvancedOrder(
            _toAdvancedOrderReturnType(_decodeAdvancedOrder)(
                CalldataStart.pptr()
            ),
            _toCriteriaResolversReturnType(_decodeCriteriaResolvers)(
                CalldataStart.pptrOffset(
                    Offset_fulfillAdvancedOrder_criteriaResolvers
                )
            ),
            fulfillerConduitKey,
            _substituteCallerForEmptyRecipient(recipient)
        );
    }
    /**
     * @notice Attempt to fill a group of orders, each with an arbitrary number
     *         of items for offer and consideration. Any order that is not
     *         currently active, has already been fully filled, or has been
     *         cancelled will be omitted. Remaining offer and consideration
     *         items will then be aggregated where possible as indicated by the
     *         supplied offer and consideration component arrays and aggregated
     *         items will be transferred to the fulfiller or to each intended
     *         recipient, respectively. Note that a failing item transfer or an
     *         issue with order formatting will cause the entire batch to fail.
     *         Note that this function does not support criteria-based orders or
     *         partial filling of orders (though filling the remainder of a
     *         partially-filled order is supported).
     *
     * @custom:param orders                    The orders to fulfill. Note that
     *                                         both the offerer and the
     *                                         fulfiller must first approve this
     *                                         contract (or the corresponding
     *                                         conduit if indicated) to transfer
     *                                         any relevant tokens on their
     *                                         behalf and that contracts must
     *                                         implement `onERC1155Received` to
     *                                         receive ERC1155 tokens as
     *                                         consideration.
     * @custom:param offerFulfillments         An array of FulfillmentComponent
     *                                         arrays indicating which offer
     *                                         items to attempt to aggregate
     *                                         when preparing executions. Note
     *                                         that any offer items not included
     *                                         as part of a fulfillment will be
     *                                         sent unaggregated to the caller.
     * @custom:param considerationFulfillments An array of FulfillmentComponent
     *                                         arrays indicating which
     *                                         consideration items to attempt to
     *                                         aggregate when preparing
     *                                         executions.
     * @param fulfillerConduitKey              A bytes32 value indicating what
     *                                         conduit, if any, to source the
     *                                         fulfiller's token approvals from.
     *                                         The zero hash signifies that no
     *                                         conduit should be used (and
     *                                         direct approvals set on this
     *                                         contract).
     * @param maximumFulfilled                 The maximum number of orders to
     *                                         fulfill.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     * @return executions      An array of elements indicating the sequence of
     *                         transfers performed as part of matching the given
     *                         orders.
     */
    function fulfillAvailableOrders(
        /**
         * @custom:name orders
         */
        Order[] calldata,
        /**
         * @custom:name offerFulfillments
         */
        FulfillmentComponent[][] calldata,
        /**
         * @custom:name considerationFulfillments
         */
        FulfillmentComponent[][] calldata,
        bytes32 fulfillerConduitKey,
        uint256 maximumFulfilled
    )
        external
        payable
        override
        returns (
            bool[] memory /* availableOrders */,
            Execution[] memory /* executions */
        )
    {
        // Convert orders to "advanced" orders and fulfill all available orders.
        return
            _fulfillAvailableAdvancedOrders(
                _toAdvancedOrdersReturnType(_decodeOrdersAsAdvancedOrders)(
                    CalldataStart.pptr()
                ), // Convert to advanced orders.
                new CriteriaResolver[](0), // No criteria resolvers supplied.
                _toNestedFulfillmentComponentsReturnType(
                    _decodeNestedFulfillmentComponents
                )(
                    CalldataStart.pptrOffset(
                        Offset_fulfillAvailableOrders_offerFulfillments
                    )
                ),
                _toNestedFulfillmentComponentsReturnType(
                    _decodeNestedFulfillmentComponents
                )(
                    CalldataStart.pptrOffset(
                        Offset_fulfillAvailableOrders_considerationFulfillments
                    )
                ),
                fulfillerConduitKey,
                msg.sender,
                maximumFulfilled
            );
    }
    /**
     * @notice Attempt to fill a group of orders, fully or partially, with an
     *         arbitrary number of items for offer and consideration per order
     *         alongside criteria resolvers containing specific token
     *         identifiers and associated proofs. Any order that is not
     *         currently active, has already been fully filled, or has been
     *         cancelled will be omitted. Remaining offer and consideration
     *         items will then be aggregated where possible as indicated by the
     *         supplied offer and consideration component arrays and aggregated
     *         items will be transferred to the fulfiller or to each intended
     *         recipient, respectively. Note that a failing item transfer or an
     *         issue with order formatting will cause the entire batch to fail.
     *
     * @custom:param advancedOrders            The orders to fulfill along with
     *                                         the fraction of those orders to
     *                                         attempt to fill. Note that both
     *                                         the offerer and the fulfiller
     *                                         must first approve this contract
     *                                         (or their conduit if indicated by
     *                                         the order) to transfer any
     *                                         relevant tokens on their behalf
     *                                         and that contracts must implement
     *                                         `onERC1155Received` to receive
     *                                         ERC1155 tokens as consideration.
     *                                         Also note that all offer and
     *                                         consideration components must
     *                                         have no remainder after
     *                                         multiplication of the respective
     *                                         amount with the supplied fraction
     *                                         for an order's partial fill
     *                                         amount to be considered valid.
     * @custom:param criteriaResolvers         An array where each element
     *                                         contains a reference to a
     *                                         specific offer or consideration,
     *                                         a token identifier, and a proof
     *                                         that the supplied token
     *                                         identifier is contained in the
     *                                         merkle root held by the item in
     *                                         question's criteria element. Note
     *                                         that an empty criteria indicates
     *                                         that any (transferable) token
     *                                         identifier on the token in
     *                                         question is valid and that no
     *                                         associated proof needs to be
     *                                         supplied.
     * @custom:param offerFulfillments         An array of FulfillmentComponent
     *                                         arrays indicating which offer
     *                                         items to attempt to aggregate
     *                                         when preparing executions. Note
     *                                         that any offer items not included
     *                                         as part of a fulfillment will be
     *                                         sent unaggregated to the caller.
     * @custom:param considerationFulfillments An array of FulfillmentComponent
     *                                         arrays indicating which
     *                                         consideration items to attempt to
     *                                         aggregate when preparing
     *                                         executions.
     * @param fulfillerConduitKey              A bytes32 value indicating what
     *                                         conduit, if any, to source the
     *                                         fulfiller's token approvals from.
     *                                         The zero hash signifies that no
     *                                         conduit should be used (and
     *                                         direct approvals set on this
     *                                         contract).
     * @param recipient                        The intended recipient for all
     *                                         received items, with `address(0)`
     *                                         indicating that the caller should
     *                                         receive the offer items.
     * @param maximumFulfilled                 The maximum number of orders to
     *                                         fulfill.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     * @return executions      An array of elements indicating the sequence of
     *                         transfers performed as part of matching the given
     *                         orders.
     */
    function fulfillAvailableAdvancedOrders(
        /**
         * @custom:name advancedOrders
         */
        AdvancedOrder[] calldata,
        /**
         * @custom:name criteriaResolvers
         */
        CriteriaResolver[] calldata,
        /**
         * @custom:name offerFulfillments
         */
        FulfillmentComponent[][] calldata,
        /**
         * @custom:name considerationFulfillments
         */
        FulfillmentComponent[][] calldata,
        bytes32 fulfillerConduitKey,
        address recipient,
        uint256 maximumFulfilled
    )
        external
        payable
        override
        returns (
            bool[] memory /* availableOrders */,
            Execution[] memory /* executions */
        )
    {
        // Fulfill all available orders.
        return
            _fulfillAvailableAdvancedOrders(
                _toAdvancedOrdersReturnType(_decodeAdvancedOrders)(
                    CalldataStart.pptr()
                ),
                _toCriteriaResolversReturnType(_decodeCriteriaResolvers)(
                    CalldataStart.pptrOffset(
                        Offset_fulfillAvailableAdvancedOrders_criteriaResolvers
                    )
                ),
                _toNestedFulfillmentComponentsReturnType(
                    _decodeNestedFulfillmentComponents
                )(
                    CalldataStart.pptrOffset(
                        Offset_fulfillAvailableAdvancedOrders_offerFulfillments
                    )
                ),
                _toNestedFulfillmentComponentsReturnType(
                    _decodeNestedFulfillmentComponents
                )(
                    CalldataStart.pptrOffset(
                        Offset_fulfillAvailableAdvancedOrders_cnsdrationFlflmnts
                    )
                ),
                fulfillerConduitKey,
                _substituteCallerForEmptyRecipient(recipient),
                maximumFulfilled
            );
    }
    /**
     * @notice Match an arbitrary number of orders, each with an arbitrary
     *         number of items for offer and consideration along with a set of
     *         fulfillments allocating offer components to consideration
     *         components. Note that this function does not support
     *         criteria-based or partial filling of orders (though filling the
     *         remainder of a partially-filled order is supported). Any unspent
     *         offer item amounts or native tokens will be transferred to the
     *         caller.
     *
     * @custom:param orders       The orders to match. Note that both the
     *                            offerer and fulfiller on each order must first
     *                            approve this contract (or their conduit if
     *                            indicated by the order) to transfer any
     *                            relevant tokens on their behalf and each
     *                            consideration recipient must implement
     *                            `onERC1155Received` to receive ERC1155 tokens.
     * @custom:param fulfillments An array of elements allocating offer
     *                            components to consideration components. Note
     *                            that each consideration component must be
     *                            fully met for the match operation to be valid,
     *                            and that any unspent offer items will be sent
     *                            unaggregated to the caller.
     *
     * @return executions An array of elements indicating the sequence of
     *                    transfers performed as part of matching the given
     *                    orders. Note that unspent offer item amounts or native
     *                    tokens will not be reflected as part of this array.
     */
    function matchOrders(
        /**
         * @custom:name orders
         */
        Order[] calldata,
        /**
         * @custom:name fulfillments
         */
        Fulfillment[] calldata
    ) external payable override returns (Execution[] memory /* executions */) {
        // Convert to advanced, validate, and match orders using fulfillments.
        return
            _matchAdvancedOrders(
                _toAdvancedOrdersReturnType(_decodeOrdersAsAdvancedOrders)(
                    CalldataStart.pptr()
                ),
                new CriteriaResolver[](0), // No criteria resolvers supplied.
                _toFulfillmentsReturnType(_decodeFulfillments)(
                    CalldataStart.pptrOffset(Offset_matchOrders_fulfillments)
                ),
                msg.sender
            );
    }
    /**
     * @notice Match an arbitrary number of full, partial, or contract orders,
     *         each with an arbitrary number of items for offer and
     *         consideration, supplying criteria resolvers containing specific
     *         token identifiers and associated proofs as well as fulfillments
     *         allocating offer components to consideration components. Any
     *         unspent offer item amounts will be transferred to the designated
     *         recipient (with the null address signifying to use the caller)
     *         and any unspent native tokens will be returned to the caller.
     *
     * @custom:param advancedOrders    The advanced orders to match. Note that
     *                                 both the offerer and fulfiller on each
     *                                 order must first approve this contract
     *                                 (or their conduit if indicated by the
     *                                 order) to transfer any relevant tokens on
     *                                 their behalf and each consideration
     *                                 recipient must implement
     *                                 `onERC1155Received` to receive ERC1155
     *                                 tokens. Also note that the offer and
     *                                 consideration components for each order
     *                                 must have no remainder after multiplying
     *                                 the respective amount with the supplied
     *                                 fraction for the group of partial fills
     *                                 to be considered valid.
     * @custom:param criteriaResolvers An array where each element contains a
     *                                 reference to a specific offer or
     *                                 consideration, a token identifier, and a
     *                                 proof that the supplied token identifier
     *                                 is contained in the merkle root held by
     *                                 the item in question's criteria element.
     *                                 Note that an empty criteria indicates
     *                                 that any (transferable) token identifier
     *                                 on the token in question is valid and
     *                                 that no associated proof needs to be
     *                                 supplied.
     * @custom:param fulfillments      An array of elements allocating offer
     *                                 components to consideration components.
     *                                 Note that each consideration component
     *                                 must be fully met for the match operation
     *                                 to be valid, and that any unspent offer
     *                                 items will be sent unaggregated to the
     *                                 designated recipient.
     * @param recipient                The intended recipient for all unspent
     *                                 offer item amounts, or the caller if the
     *                                 null address is supplied.
     *
     * @return executions An array of elements indicating the sequence of
     *                     transfers performed as part of matching the given
     *                     orders. Note that unspent offer item amounts or
     *                     native tokens will not be reflected as part of this
     *                     array.
     */
    function matchAdvancedOrders(
        /**
         * @custom:name advancedOrders
         */
        AdvancedOrder[] calldata,
        /**
         * @custom:name criteriaResolvers
         */
        CriteriaResolver[] calldata,
        /**
         * @custom:name fulfillments
         */
        Fulfillment[] calldata,
        address recipient
    ) external payable override returns (Execution[] memory /* executions */) {
        // Validate and match the advanced orders using supplied fulfillments.
        return
            _matchAdvancedOrders(
                _toAdvancedOrdersReturnType(_decodeAdvancedOrders)(
                    CalldataStart.pptr()
                ),
                _toCriteriaResolversReturnType(_decodeCriteriaResolvers)(
                    CalldataStart.pptrOffset(
                        Offset_matchAdvancedOrders_criteriaResolvers
                    )
                ),
                _toFulfillmentsReturnType(_decodeFulfillments)(
                    CalldataStart.pptrOffset(
                        Offset_matchAdvancedOrders_fulfillments
                    )
                ),
                _substituteCallerForEmptyRecipient(recipient)
            );
    }
    /**
     * @notice Cancel an arbitrary number of orders. Note that only the offerer
     *         or the zone of a given order may cancel it. Callers should ensure
     *         that the intended order was cancelled by calling `getOrderStatus`
     *         and confirming that `isCancelled` returns `true`.
     *
     * @param orders The orders to cancel.
     *
     * @return cancelled A boolean indicating whether the supplied orders have
     *                   been successfully cancelled.
     */
    function cancel(
        OrderComponents[] calldata orders
    ) external override returns (bool cancelled) {
        // Cancel the orders.
        cancelled = _cancel(orders);
    }
    /**
     * @notice Validate an arbitrary number of orders, thereby registering their
     *         signatures as valid and allowing the fulfiller to skip signature
     *         verification on fulfillment. Note that validated orders may still
     *         be unfulfillable due to invalid item amounts or other factors;
     *         callers should determine whether validated orders are fulfillable
     *         by simulating the fulfillment call prior to execution. Also note
     *         that anyone can validate a signed order, but only the offerer can
     *         validate an order without supplying a signature.
     *
     * @custom:param orders The orders to validate.
     *
     * @return validated A boolean indicating whether the supplied orders have
     *                   been successfully validated.
     */
    function validate(
        /**
         * @custom:name orders
         */
        Order[] calldata
    ) external override returns (bool /* validated */) {
        return
            _validate(_toOrdersReturnType(_decodeOrders)(CalldataStart.pptr()));
    }
    /**
     * @notice Cancel all orders from a given offerer with a given zone in bulk
     *         by incrementing a counter. Note that only the offerer may
     *         increment the counter.
     *
     * @return newCounter The new counter.
     */
    function incrementCounter() external override returns (uint256 newCounter) {
        // Increment current counter for the supplied offerer.  Note that the
        // counter is incremented by a large, quasi-random interval.
        newCounter = _incrementCounter();
    }
    /**
     * @notice Retrieve the order hash for a given order.
     *
     * @custom:param order The components of the order.
     *
     * @return orderHash The order hash.
     */
    function getOrderHash(
        /**
         * @custom:name order
         */
        OrderComponents calldata
    ) external view override returns (bytes32 orderHash) {
        CalldataPointer orderPointer = CalldataStart.pptr();
        // Derive order hash by supplying order parameters along with counter.
        orderHash = _deriveOrderHash(
            _toOrderParametersReturnType(
                _decodeOrderComponentsAsOrderParameters
            )(orderPointer),
            // Read order counter
            orderPointer.offset(OrderParameters_counter_offset).readUint256()
        );
    }
    /**
     * @notice Retrieve the status of a given order by hash, including whether
     *         the order has been cancelled or validated and the fraction of the
     *         order that has been filled. Since the _orderStatus[orderHash]
     *         does not get set for contract orders, getOrderStatus will always
     *         return (false, false, 0, 0) for those hashes. Note that this
     *         function is susceptible to view reentrancy and so should be used
     *         with care when calling from other contracts.
     *
     * @param orderHash The order hash in question.
     *
     * @return isValidated A boolean indicating whether the order in question
     *                     has been validated (i.e. previously approved or
     *                     partially filled).
     * @return isCancelled A boolean indicating whether the order in question
     *                     has been cancelled.
     * @return totalFilled The total portion of the order that has been filled
     *                     (i.e. the "numerator").
     * @return totalSize   The total size of the order that is either filled or
     *                     unfilled (i.e. the "denominator").
     */
    function getOrderStatus(
        bytes32 orderHash
    )
        external
        view
        override
        returns (
            bool isValidated,
            bool isCancelled,
            uint256 totalFilled,
            uint256 totalSize
        )
    {
        // Retrieve the order status using the order hash.
        return _getOrderStatus(orderHash);
    }
    /**
     * @notice Retrieve the current counter for a given offerer.
     *
     * @param offerer The offerer in question.
     *
     * @return counter The current counter.
     */
    function getCounter(
        address offerer
    ) external view override returns (uint256 counter) {
        // Return the counter for the supplied offerer.
        counter = _getCounter(offerer);
    }
    /**
     * @notice Retrieve configuration information for this contract.
     *
     * @return version           The contract version.
     * @return domainSeparator   The domain separator for this contract.
     * @return conduitController The conduit Controller set for this contract.
     */
    function information()
        external
        view
        override
        returns (
            string memory version,
            bytes32 domainSeparator,
            address conduitController
        )
    {
        // Return the information for this contract.
        return _information();
    }
    /**
     * @dev Gets the contract offerer nonce for the specified contract offerer.
     *      Note that this function is susceptible to view reentrancy and so
     *      should be used with care when calling from other contracts.
     *
     * @param contractOfferer The contract offerer for which to get the nonce.
     *
     * @return nonce The contract offerer nonce.
     */
    function getContractOffererNonce(
        address contractOfferer
    ) external view override returns (uint256 nonce) {
        nonce = _contractNonces[contractOfferer];
    }
    /**
     * @notice Retrieve the name of this contract.
     *
     * @return contractName The name of this contract.
     */
    function name()
        external
        pure
        override
        returns (string memory /* contractName */)
    {
        // Return the name of the contract.
        return _name();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {
    AdvancedOrder,
    BasicOrderParameters,
    CriteriaResolver,
    Execution,
    Fulfillment,
    FulfillmentComponent,
    Order,
    OrderComponents
} from "../lib/ConsiderationStructs.sol";
/**
 * @title ConsiderationInterface
 * @author 0age
 * @custom:version 1.6
 * @notice Consideration is a generalized native token/ERC20/ERC721/ERC1155
 *         marketplace. It minimizes external calls to the greatest extent
 *         possible and provides lightweight methods for common routes as well
 *         as more flexible methods for composing advanced orders.
 *
 * @dev ConsiderationInterface contains all external function interfaces for
 *      Consideration.
 */
interface ConsiderationInterface {
    /**
     * @notice Fulfill an order offering an ERC721 token by supplying Ether (or
     *         the native token for the given chain) as consideration for the
     *         order. An arbitrary number of "additional recipients" may also be
     *         supplied which will each receive native tokens from the fulfiller
     *         as consideration.
     *
     * @param parameters Additional information on the fulfilled order. Note
     *                   that the offerer must first approve this contract (or
     *                   their preferred conduit if indicated by the order) for
     *                   their offered ERC721 token to be transferred.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillBasicOrder(
        BasicOrderParameters calldata parameters
    ) external payable returns (bool fulfilled);
    /**
     * @notice Fulfill an order with an arbitrary number of items for offer and
     *         consideration. Note that this function does not support
     *         criteria-based orders or partial filling of orders (though
     *         filling the remainder of a partially-filled order is supported).
     *
     * @param order               The order to fulfill. Note that both the
     *                            offerer and the fulfiller must first approve
     *                            this contract (or the corresponding conduit if
     *                            indicated) to transfer any relevant tokens on
     *                            their behalf and that contracts must implement
     *                            `onERC1155Received` to receive ERC1155 tokens
     *                            as consideration.
     * @param fulfillerConduitKey A bytes32 value indicating what conduit, if
     *                            any, to source the fulfiller's token approvals
     *                            from. The zero hash signifies that no conduit
     *                            should be used, with direct approvals set on
     *                            Consideration.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillOrder(
        Order calldata order,
        bytes32 fulfillerConduitKey
    ) external payable returns (bool fulfilled);
    /**
     * @notice Fill an order, fully or partially, with an arbitrary number of
     *         items for offer and consideration alongside criteria resolvers
     *         containing specific token identifiers and associated proofs.
     *
     * @param advancedOrder       The order to fulfill along with the fraction
     *                            of the order to attempt to fill. Note that
     *                            both the offerer and the fulfiller must first
     *                            approve this contract (or their preferred
     *                            conduit if indicated by the order) to transfer
     *                            any relevant tokens on their behalf and that
     *                            contracts must implement `onERC1155Received`
     *                            to receive ERC1155 tokens as consideration.
     *                            Also note that all offer and consideration
     *                            components must have no remainder after
     *                            multiplication of the respective amount with
     *                            the supplied fraction for the partial fill to
     *                            be considered valid.
     * @param criteriaResolvers   An array where each element contains a
     *                            reference to a specific offer or
     *                            consideration, a token identifier, and a proof
     *                            that the supplied token identifier is
     *                            contained in the merkle root held by the item
     *                            in question's criteria element. Note that an
     *                            empty criteria indicates that any
     *                            (transferable) token identifier on the token
     *                            in question is valid and that no associated
     *                            proof needs to be supplied.
     * @param fulfillerConduitKey A bytes32 value indicating what conduit, if
     *                            any, to source the fulfiller's token approvals
     *                            from. The zero hash signifies that no conduit
     *                            should be used, with direct approvals set on
     *                            Consideration.
     * @param recipient           The intended recipient for all received items,
     *                            with `address(0)` indicating that the caller
     *                            should receive the items.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillAdvancedOrder(
        AdvancedOrder calldata advancedOrder,
        CriteriaResolver[] calldata criteriaResolvers,
        bytes32 fulfillerConduitKey,
        address recipient
    ) external payable returns (bool fulfilled);
    /**
     * @notice Attempt to fill a group of orders, each with an arbitrary number
     *         of items for offer and consideration. Any order that is not
     *         currently active, has already been fully filled, or has been
     *         cancelled will be omitted. Remaining offer and consideration
     *         items will then be aggregated where possible as indicated by the
     *         supplied offer and consideration component arrays and aggregated
     *         items will be transferred to the fulfiller or to each intended
     *         recipient, respectively. Note that a failing item transfer or an
     *         issue with order formatting will cause the entire batch to fail.
     *         Note that this function does not support criteria-based orders or
     *         partial filling of orders (though filling the remainder of a
     *         partially-filled order is supported).
     *
     * @param orders                    The orders to fulfill. Note that both
     *                                  the offerer and the fulfiller must first
     *                                  approve this contract (or the
     *                                  corresponding conduit if indicated) to
     *                                  transfer any relevant tokens on their
     *                                  behalf and that contracts must implement
     *                                  `onERC1155Received` to receive ERC1155
     *                                  tokens as consideration.
     * @param offerFulfillments         An array of FulfillmentComponent arrays
     *                                  indicating which offer items to attempt
     *                                  to aggregate when preparing executions.
     * @param considerationFulfillments An array of FulfillmentComponent arrays
     *                                  indicating which consideration items to
     *                                  attempt to aggregate when preparing
     *                                  executions.
     * @param fulfillerConduitKey       A bytes32 value indicating what conduit,
     *                                  if any, to source the fulfiller's token
     *                                  approvals from. The zero hash signifies
     *                                  that no conduit should be used, with
     *                                  direct approvals set on this contract.
     * @param maximumFulfilled          The maximum number of orders to fulfill.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     * @return executions      An array of elements indicating the sequence of
     *                         transfers performed as part of matching the given
     *                         orders. Note that unspent offer item amounts or
     *                         native tokens will not be reflected as part of
     *                         this array.
     */
    function fulfillAvailableOrders(
        Order[] calldata orders,
        FulfillmentComponent[][] calldata offerFulfillments,
        FulfillmentComponent[][] calldata considerationFulfillments,
        bytes32 fulfillerConduitKey,
        uint256 maximumFulfilled
    )
        external
        payable
        returns (bool[] memory availableOrders, Execution[] memory executions);
    /**
     * @notice Attempt to fill a group of orders, fully or partially, with an
     *         arbitrary number of items for offer and consideration per order
     *         alongside criteria resolvers containing specific token
     *         identifiers and associated proofs. Any order that is not
     *         currently active, has already been fully filled, or has been
     *         cancelled will be omitted. Remaining offer and consideration
     *         items will then be aggregated where possible as indicated by the
     *         supplied offer and consideration component arrays and aggregated
     *         items will be transferred to the fulfiller or to each intended
     *         recipient, respectively. Note that a failing item transfer or an
     *         issue with order formatting will cause the entire batch to fail.
     *
     * @param advancedOrders            The orders to fulfill along with the
     *                                  fraction of those orders to attempt to
     *                                  fill. Note that both the offerer and the
     *                                  fulfiller must first approve this
     *                                  contract (or their preferred conduit if
     *                                  indicated by the order) to transfer any
     *                                  relevant tokens on their behalf and that
     *                                  contracts must implement
     *                                  `onERC1155Received` to enable receipt of
     *                                  ERC1155 tokens as consideration. Also
     *                                  note that all offer and consideration
     *                                  components must have no remainder after
     *                                  multiplication of the respective amount
     *                                  with the supplied fraction for an
     *                                  order's partial fill amount to be
     *                                  considered valid.
     * @param criteriaResolvers         An array where each element contains a
     *                                  reference to a specific offer or
     *                                  consideration, a token identifier, and a
     *                                  proof that the supplied token identifier
     *                                  is contained in the merkle root held by
     *                                  the item in question's criteria element.
     *                                  Note that an empty criteria indicates
     *                                  that any (transferable) token
     *                                  identifier on the token in question is
     *                                  valid and that no associated proof needs
     *                                  to be supplied.
     * @param offerFulfillments         An array of FulfillmentComponent arrays
     *                                  indicating which offer items to attempt
     *                                  to aggregate when preparing executions.
     * @param considerationFulfillments An array of FulfillmentComponent arrays
     *                                  indicating which consideration items to
     *                                  attempt to aggregate when preparing
     *                                  executions.
     * @param fulfillerConduitKey       A bytes32 value indicating what conduit,
     *                                  if any, to source the fulfiller's token
     *                                  approvals from. The zero hash signifies
     *                                  that no conduit should be used, with
     *                                  direct approvals set on this contract.
     * @param recipient                 The intended recipient for all received
     *                                  items, with `address(0)` indicating that
     *                                  the caller should receive the items.
     * @param maximumFulfilled          The maximum number of orders to fulfill.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     * @return executions      An array of elements indicating the sequence of
     *                         transfers performed as part of matching the given
     *                         orders. Note that unspent offer item amounts or
     *                         native tokens will not be reflected as part of
     *                         this array.
     */
    function fulfillAvailableAdvancedOrders(
        AdvancedOrder[] calldata advancedOrders,
        CriteriaResolver[] calldata criteriaResolvers,
        FulfillmentComponent[][] calldata offerFulfillments,
        FulfillmentComponent[][] calldata considerationFulfillments,
        bytes32 fulfillerConduitKey,
        address recipient,
        uint256 maximumFulfilled
    )
        external
        payable
        returns (bool[] memory availableOrders, Execution[] memory executions);
    /**
     * @notice Match an arbitrary number of orders, each with an arbitrary
     *         number of items for offer and consideration along with a set of
     *         fulfillments allocating offer components to consideration
     *         components. Note that this function does not support
     *         criteria-based or partial filling of orders (though filling the
     *         remainder of a partially-filled order is supported). Any unspent
     *         offer item amounts or native tokens will be transferred to the
     *         caller.
     *
     * @param orders       The orders to match. Note that both the offerer and
     *                     fulfiller on each order must first approve this
     *                     contract (or their conduit if indicated by the order)
     *                     to transfer any relevant tokens on their behalf and
     *                     each consideration recipient must implement
     *                     `onERC1155Received` to enable ERC1155 token receipt.
     * @param fulfillments An array of elements allocating offer components to
     *                     consideration components. Note that each
     *                     consideration component must be fully met for the
     *                     match operation to be valid.
     *
     * @return executions An array of elements indicating the sequence of
     *                    transfers performed as part of matching the given
     *                    orders. Note that unspent offer item amounts or
     *                    native tokens will not be reflected as part of this
     *                    array.
     */
    function matchOrders(
        Order[] calldata orders,
        Fulfillment[] calldata fulfillments
    ) external payable returns (Execution[] memory executions);
    /**
     * @notice Match an arbitrary number of full or partial orders, each with an
     *         arbitrary number of items for offer and consideration, supplying
     *         criteria resolvers containing specific token identifiers and
     *         associated proofs as well as fulfillments allocating offer
     *         components to consideration components. Any unspent offer item
     *         amounts will be transferred to the designated recipient (with the
     *         null address signifying to use the caller) and any unspent native
     *         tokens will be returned to the caller.
     *
     * @param orders            The advanced orders to match. Note that both the
     *                          offerer and fulfiller on each order must first
     *                          approve this contract (or a preferred conduit if
     *                          indicated by the order) to transfer any relevant
     *                          tokens on their behalf and each consideration
     *                          recipient must implement `onERC1155Received` in
     *                          order to receive ERC1155 tokens. Also note that
     *                          the offer and consideration components for each
     *                          order must have no remainder after multiplying
     *                          the respective amount with the supplied fraction
     *                          in order for the group of partial fills to be
     *                          considered valid.
     * @param criteriaResolvers An array where each element contains a reference
     *                          to a specific order as well as that order's
     *                          offer or consideration, a token identifier, and
     *                          a proof that the supplied token identifier is
     *                          contained in the order's merkle root. Note that
     *                          an empty root indicates that any (transferable)
     *                          token identifier is valid and that no associated
     *                          proof needs to be supplied.
     * @param fulfillments      An array of elements allocating offer components
     *                          to consideration components. Note that each
     *                          consideration component must be fully met in
     *                          order for the match operation to be valid.
     * @param recipient         The intended recipient for all unspent offer
     *                          item amounts, or the caller if the null address
     *                          is supplied.
     *
     * @return executions An array of elements indicating the sequence of
     *                    transfers performed as part of matching the given
     *                    orders. Note that unspent offer item amounts or native
     *                    tokens will not be reflected as part of this array.
     */
    function matchAdvancedOrders(
        AdvancedOrder[] calldata orders,
        CriteriaResolver[] calldata criteriaResolvers,
        Fulfillment[] calldata fulfillments,
        address recipient
    ) external payable returns (Execution[] memory executions);
    /**
     * @notice Cancel an arbitrary number of orders. Note that only the offerer
     *         or the zone of a given order may cancel it. Callers should ensure
     *         that the intended order was cancelled by calling `getOrderStatus`
     *         and confirming that `isCancelled` returns `true`.
     *
     * @param orders The orders to cancel.
     *
     * @return cancelled A boolean indicating whether the supplied orders have
     *                   been successfully cancelled.
     */
    function cancel(
        OrderComponents[] calldata orders
    ) external returns (bool cancelled);
    /**
     * @notice Validate an arbitrary number of orders, thereby registering their
     *         signatures as valid and allowing the fulfiller to skip signature
     *         verification on fulfillment. Note that validated orders may still
     *         be unfulfillable due to invalid item amounts or other factors;
     *         callers should determine whether validated orders are fulfillable
     *         by simulating the fulfillment call prior to execution. Also note
     *         that anyone can validate a signed order, but only the offerer can
     *         validate an order without supplying a signature.
     *
     * @param orders The orders to validate.
     *
     * @return validated A boolean indicating whether the supplied orders have
     *                   been successfully validated.
     */
    function validate(
        Order[] calldata orders
    ) external returns (bool validated);
    /**
     * @notice Cancel all orders from a given offerer with a given zone in bulk
     *         by incrementing a counter. Note that only the offerer may
     *         increment the counter.
     *
     * @return newCounter The new counter.
     */
    function incrementCounter() external returns (uint256 newCounter);
    /**
     * @notice Fulfill an order offering an ERC721 token by supplying Ether (or
     *         the native token for the given chain) as consideration for the
     *         order. An arbitrary number of "additional recipients" may also be
     *         supplied which will each receive native tokens from the fulfiller
     *         as consideration. Note that this function costs less gas than
     *         `fulfillBasicOrder` due to the zero bytes in the function
     *         selector (0x00000000) which also results in earlier function
     *         dispatch.
     *
     * @param parameters Additional information on the fulfilled order. Note
     *                   that the offerer must first approve this contract (or
     *                   their preferred conduit if indicated by the order) for
     *                   their offered ERC721 token to be transferred.
     *
     * @return fulfilled A boolean indicating whether the order has been
     *                   successfully fulfilled.
     */
    function fulfillBasicOrder_efficient_6GL6yc(
        BasicOrderParameters calldata parameters
    ) external payable returns (bool fulfilled);
    /**
     * @notice Retrieve the order hash for a given order.
     *
     * @param order The components of the order.
     *
     * @return orderHash The order hash.
     */
    function getOrderHash(
        OrderComponents calldata order
    ) external view returns (bytes32 orderHash);
    /**
     * @notice Retrieve the status of a given order by hash, including whether
     *         the order has been cancelled or validated and the fraction of the
     *         order that has been filled.
     *
     * @param orderHash The order hash in question.
     *
     * @return isValidated A boolean indicating whether the order in question
     *                     has been validated (i.e. previously approved or
     *                     partially filled).
     * @return isCancelled A boolean indicating whether the order in question
     *                     has been cancelled.
     * @return totalFilled The total portion of the order that has been filled
     *                     (i.e. the "numerator").
     * @return totalSize   The total size of the order that is either filled or
     *                     unfilled (i.e. the "denominator").
     */
    function getOrderStatus(
        bytes32 orderHash
    )
        external
        view
        returns (
            bool isValidated,
            bool isCancelled,
            uint256 totalFilled,
            uint256 totalSize
        );
    /**
     * @notice Retrieve the current counter for a given offerer.
     *
     * @param offerer The offerer in question.
     *
     * @return counter The current counter.
     */
    function getCounter(
        address offerer
    ) external view returns (uint256 counter);
    /**
     * @notice Retrieve configuration information for this contract.
     *
     * @return version           The contract version.
     * @return domainSeparator   The domain separator for this contract.
     * @return conduitController The conduit Controller set for this contract.
     */
    function information()
        external
        view
        returns (
            string memory version,
            bytes32 domainSeparator,
            address conduitController
        );
    function getContractOffererNonce(
        address contractOfferer
    ) external view returns (uint256 nonce);
    /**
     * @notice Retrieve the name of this contract.
     *
     * @return contractName The name of this contract.
     */
    function name() external view returns (string memory contractName);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {
    BasicOrderType,
    ItemType,
    OrderType,
    Side
} from "./ConsiderationEnums.sol";
import {
    CalldataPointer,
    MemoryPointer
} from "../helpers/PointerLibraries.sol";
/**
 * @dev An order contains eleven components: an offerer, a zone (or account that
 *      can cancel the order or restrict who can fulfill the order depending on
 *      the type), the order type (specifying partial fill support as well as
 *      restricted order status), the start and end time, a hash that will be
 *      provided to the zone when validating restricted orders, a salt, a key
 *      corresponding to a given conduit, a counter, and an arbitrary number of
 *      offer items that can be spent along with consideration items that must
 *      be received by their respective recipient.
 */
struct OrderComponents {
    address offerer;
    address zone;
    OfferItem[] offer;
    ConsiderationItem[] consideration;
    OrderType orderType;
    uint256 startTime;
    uint256 endTime;
    bytes32 zoneHash;
    uint256 salt;
    bytes32 conduitKey;
    uint256 counter;
}
/**
 * @dev An offer item has five components: an item type (ETH or other native
 *      tokens, ERC20, ERC721, and ERC1155, as well as criteria-based ERC721 and
 *      ERC1155), a token address, a dual-purpose "identifierOrCriteria"
 *      component that will either represent a tokenId or a merkle root
 *      depending on the item type, and a start and end amount that support
 *      increasing or decreasing amounts over the duration of the respective
 *      order.
 */
struct OfferItem {
    ItemType itemType;
    address token;
    uint256 identifierOrCriteria;
    uint256 startAmount;
    uint256 endAmount;
}
/**
 * @dev A consideration item has the same five components as an offer item and
 *      an additional sixth component designating the required recipient of the
 *      item.
 */
struct ConsiderationItem {
    ItemType itemType;
    address token;
    uint256 identifierOrCriteria;
    uint256 startAmount;
    uint256 endAmount;
    address payable recipient;
}
/**
 * @dev A spent item is translated from a utilized offer item and has four
 *      components: an item type (ETH or other native tokens, ERC20, ERC721, and
 *      ERC1155), a token address, a tokenId, and an amount.
 */
struct SpentItem {
    ItemType itemType;
    address token;
    uint256 identifier;
    uint256 amount;
}
/**
 * @dev A received item is translated from a utilized consideration item and has
 *      the same four components as a spent item, as well as an additional fifth
 *      component designating the required recipient of the item.
 */
struct ReceivedItem {
    ItemType itemType;
    address token;
    uint256 identifier;
    uint256 amount;
    address payable recipient;
}
/**
 * @dev For basic orders involving ETH / native / ERC20 <=> ERC721 / ERC1155
 *      matching, a group of six functions may be called that only requires a
 *      subset of the usual order arguments. Note the use of a "basicOrderType"
 *      enum; this represents both the usual order type as well as the "route"
 *      of the basic order (a simple derivation function for the basic order
 *      type is `basicOrderType = orderType + (4 * basicOrderRoute)`.)
 */
struct BasicOrderParameters {
    // calldata offset
    address considerationToken; // 0x24
    uint256 considerationIdentifier; // 0x44
    uint256 considerationAmount; // 0x64
    address payable offerer; // 0x84
    address zone; // 0xa4
    address offerToken; // 0xc4
    uint256 offerIdentifier; // 0xe4
    uint256 offerAmount; // 0x104
    BasicOrderType basicOrderType; // 0x124
    uint256 startTime; // 0x144
    uint256 endTime; // 0x164
    bytes32 zoneHash; // 0x184
    uint256 salt; // 0x1a4
    bytes32 offererConduitKey; // 0x1c4
    bytes32 fulfillerConduitKey; // 0x1e4
    uint256 totalOriginalAdditionalRecipients; // 0x204
    AdditionalRecipient[] additionalRecipients; // 0x224
    bytes signature; // 0x244
    // Total length, excluding dynamic array data: 0x264 (580)
}
/**
 * @dev Basic orders can supply any number of additional recipients, with the
 *      implied assumption that they are supplied from the offered ETH (or other
 *      native token) or ERC20 token for the order.
 */
struct AdditionalRecipient {
    uint256 amount;
    address payable recipient;
}
/**
 * @dev The full set of order components, with the exception of the counter,
 *      must be supplied when fulfilling more sophisticated orders or groups of
 *      orders. The total number of original consideration items must also be
 *      supplied, as the caller may specify additional consideration items.
 */
struct OrderParameters {
    address offerer; // 0x00
    address zone; // 0x20
    OfferItem[] offer; // 0x40
    ConsiderationItem[] consideration; // 0x60
    OrderType orderType; // 0x80
    uint256 startTime; // 0xa0
    uint256 endTime; // 0xc0
    bytes32 zoneHash; // 0xe0
    uint256 salt; // 0x100
    bytes32 conduitKey; // 0x120
    uint256 totalOriginalConsiderationItems; // 0x140
    // offer.length                          // 0x160
}
/**
 * @dev Orders require a signature in addition to the other order parameters.
 */
struct Order {
    OrderParameters parameters;
    bytes signature;
}
/**
 * @dev Advanced orders include a numerator (i.e. a fraction to attempt to fill)
 *      and a denominator (the total size of the order) in addition to the
 *      signature and other order parameters. It also supports an optional field
 *      for supplying extra data; this data will be provided to the zone if the
 *      order type is restricted and the zone is not the caller, or will be
 *      provided to the offerer as context for contract order types.
 */
struct AdvancedOrder {
    OrderParameters parameters;
    uint120 numerator;
    uint120 denominator;
    bytes signature;
    bytes extraData;
}
/**
 * @dev Orders can be validated (either explicitly via `validate`, or as a
 *      consequence of a full or partial fill), specifically cancelled (they can
 *      also be cancelled in bulk via incrementing a per-zone counter), and
 *      partially or fully filled (with the fraction filled represented by a
 *      numerator and denominator).
 */
struct OrderStatus {
    bool isValidated;
    bool isCancelled;
    uint120 numerator;
    uint120 denominator;
}
/**
 * @dev A criteria resolver specifies an order, side (offer vs. consideration),
 *      and item index. It then provides a chosen identifier (i.e. tokenId)
 *      alongside a merkle proof demonstrating the identifier meets the required
 *      criteria.
 */
struct CriteriaResolver {
    uint256 orderIndex;
    Side side;
    uint256 index;
    uint256 identifier;
    bytes32[] criteriaProof;
}
/**
 * @dev A fulfillment is applied to a group of orders. It decrements a series of
 *      offer and consideration items, then generates a single execution
 *      element. A given fulfillment can be applied to as many offer and
 *      consideration items as desired, but must contain at least one offer and
 *      at least one consideration that match. The fulfillment must also remain
 *      consistent on all key parameters across all offer items (same offerer,
 *      token, type, tokenId, and conduit preference) as well as across all
 *      consideration items (token, type, tokenId, and recipient).
 */
struct Fulfillment {
    FulfillmentComponent[] offerComponents;
    FulfillmentComponent[] considerationComponents;
}
/**
 * @dev Each fulfillment component contains one index referencing a specific
 *      order and another referencing a specific offer or consideration item.
 */
struct FulfillmentComponent {
    uint256 orderIndex;
    uint256 itemIndex;
}
/**
 * @dev An execution is triggered once all consideration items have been zeroed
 *      out. It sends the item in question from the offerer to the item's
 *      recipient, optionally sourcing approvals from either this contract
 *      directly or from the offerer's chosen conduit if one is specified. An
 *      execution is not provided as an argument, but rather is derived via
 *      orders, criteria resolvers, and fulfillments (where the total number of
 *      executions will be less than or equal to the total number of indicated
 *      fulfillments) and returned as part of `matchOrders`.
 */
struct Execution {
    ReceivedItem item;
    address offerer;
    bytes32 conduitKey;
}
/**
 * @dev Restricted orders are validated post-execution by calling validateOrder
 *      on the zone. This struct provides context about the order fulfillment
 *      and any supplied extraData, as well as all order hashes fulfilled in a
 *      call to a match or fulfillAvailable method.
 */
struct ZoneParameters {
    bytes32 orderHash;
    address fulfiller;
    address offerer;
    SpentItem[] offer;
    ReceivedItem[] consideration;
    bytes extraData;
    bytes32[] orderHashes;
    uint256 startTime;
    uint256 endTime;
    bytes32 zoneHash;
}
/**
 * @dev Zones and contract offerers can communicate which schemas they implement
 *      along with any associated metadata related to each schema.
 */
struct Schema {
    uint256 id;
    bytes metadata;
}
using StructPointers for OrderComponents global;
using StructPointers for OfferItem global;
using StructPointers for ConsiderationItem global;
using StructPointers for SpentItem global;
using StructPointers for ReceivedItem global;
using StructPointers for BasicOrderParameters global;
using StructPointers for AdditionalRecipient global;
using StructPointers for OrderParameters global;
using StructPointers for Order global;
using StructPointers for AdvancedOrder global;
using StructPointers for OrderStatus global;
using StructPointers for CriteriaResolver global;
using StructPointers for Fulfillment global;
using StructPointers for FulfillmentComponent global;
using StructPointers for Execution global;
using StructPointers for ZoneParameters global;
/**
 * @dev This library provides a set of functions for converting structs to
 *      pointers.
 */
library StructPointers {
    /**
     * @dev Get a MemoryPointer from OrderComponents.
     *
     * @param obj The OrderComponents object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OrderComponents memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from OrderComponents.
     *
     * @param obj The OrderComponents object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OrderComponents calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from OfferItem.
     *
     * @param obj The OfferItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OfferItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from OfferItem.
     *
     * @param obj The OfferItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OfferItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from ConsiderationItem.
     *
     * @param obj The ConsiderationItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        ConsiderationItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from ConsiderationItem.
     *
     * @param obj The ConsiderationItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        ConsiderationItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from SpentItem.
     *
     * @param obj The SpentItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        SpentItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from SpentItem.
     *
     * @param obj The SpentItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        SpentItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from ReceivedItem.
     *
     * @param obj The ReceivedItem object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        ReceivedItem memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from ReceivedItem.
     *
     * @param obj The ReceivedItem object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        ReceivedItem calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from BasicOrderParameters.
     *
     * @param obj The BasicOrderParameters object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        BasicOrderParameters memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from BasicOrderParameters.
     *
     * @param obj The BasicOrderParameters object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        BasicOrderParameters calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from AdditionalRecipient.
     *
     * @param obj The AdditionalRecipient object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        AdditionalRecipient memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from AdditionalRecipient.
     *
     * @param obj The AdditionalRecipient object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        AdditionalRecipient calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from OrderParameters.
     *
     * @param obj The OrderParameters object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OrderParameters memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from OrderParameters.
     *
     * @param obj The OrderParameters object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OrderParameters calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from Order.
     *
     * @param obj The Order object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        Order memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from Order.
     *
     * @param obj The Order object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        Order calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from AdvancedOrder.
     *
     * @param obj The AdvancedOrder object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        AdvancedOrder memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from AdvancedOrder.
     *
     * @param obj The AdvancedOrder object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        AdvancedOrder calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from OrderStatus.
     *
     * @param obj The OrderStatus object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        OrderStatus memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from OrderStatus.
     *
     * @param obj The OrderStatus object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        OrderStatus calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from CriteriaResolver.
     *
     * @param obj The CriteriaResolver object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        CriteriaResolver memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from CriteriaResolver.
     *
     * @param obj The CriteriaResolver object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        CriteriaResolver calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from Fulfillment.
     *
     * @param obj The Fulfillment object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        Fulfillment memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from Fulfillment.
     *
     * @param obj The Fulfillment object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        Fulfillment calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from FulfillmentComponent.
     *
     * @param obj The FulfillmentComponent object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        FulfillmentComponent memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from FulfillmentComponent.
     *
     * @param obj The FulfillmentComponent object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        FulfillmentComponent calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from Execution.
     *
     * @param obj The Execution object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        Execution memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from Execution.
     *
     * @param obj The Execution object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        Execution calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a MemoryPointer from ZoneParameters.
     *
     * @param obj The ZoneParameters object.
     *
     * @return ptr The MemoryPointer.
     */
    function toMemoryPointer(
        ZoneParameters memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Get a CalldataPointer from ZoneParameters.
     *
     * @param obj The ZoneParameters object.
     *
     * @return ptr The CalldataPointer.
     */
    function toCalldataPointer(
        ZoneParameters calldata obj
    ) internal pure returns (CalldataPointer ptr) {
        assembly {
            ptr := obj
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    Side,
    ItemType,
    OrderType
} from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    AdvancedOrder,
    ConsiderationItem,
    CriteriaResolver,
    Execution,
    Fulfillment,
    FulfillmentComponent,
    OfferItem,
    OrderParameters,
    ReceivedItem
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import { OrderFulfiller } from "./OrderFulfiller.sol";
import { FulfillmentApplier } from "./FulfillmentApplier.sol";
import {
    _revertConsiderationNotMet,
    _revertInvalidNativeOfferItem,
    _revertNoSpecifiedOrdersAvailable
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    Error_selector_offset,
    InsufficientNativeTokensSupplied_error_selector,
    InsufficientNativeTokensSupplied_error_length
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
import {
    AccumulatorDisarmed,
    ConsiderationItem_recipient_offset,
    Execution_offerer_offset,
    NonMatchSelector_InvalidErrorValue,
    NonMatchSelector_MagicMask,
    OneWord,
    OneWordShift,
    OrdersMatchedTopic0,
    ReceivedItem_amount_offset,
    ReceivedItem_recipient_offset,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    MemoryPointer,
    MemoryPointerLib,
    ZeroSlotPtr
} from "seaport-types/src/helpers/PointerLibraries.sol";
/**
 * @title OrderCombiner
 * @author 0age
 * @notice OrderCombiner contains logic for fulfilling combinations of orders,
 *         either by matching offer items to consideration items or by
 *         fulfilling orders where available.
 */
contract OrderCombiner is OrderFulfiller, FulfillmentApplier {
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) OrderFulfiller(conduitController) {}
    /**
     * @notice Internal function to attempt to fill a group of orders, fully or
     *         partially, with an arbitrary number of items for offer and
     *         consideration per order alongside criteria resolvers containing
     *         specific token identifiers and associated proofs. Any order that
     *         is not currently active, has already been fully filled, or has
     *         been cancelled will be omitted. Remaining offer and consideration
     *         items will then be aggregated where possible as indicated by the
     *         supplied offer and consideration component arrays and aggregated
     *         items will be transferred to the fulfiller or to each intended
     *         recipient, respectively. Note that a failing item transfer or an
     *         issue with order formatting will cause the entire batch to fail.
     *
     * @param advancedOrders            The orders to fulfill along with the
     *                                  fraction of those orders to attempt to
     *                                  fill. Note that both the offerer and the
     *                                  fulfiller must first approve this
     *                                  contract (or a conduit if indicated by
     *                                  the order) to transfer any relevant
     *                                  tokens on their behalf and that
     *                                  contracts must implement
     *                                  `onERC1155Received` in order to receive
     *                                  ERC1155 tokens as consideration. Also
     *                                  note that all offer and consideration
     *                                  components must have no remainder after
     *                                  multiplication of the respective amount
     *                                  with the supplied fraction for an
     *                                  order's partial fill amount to be
     *                                  considered valid.
     * @param criteriaResolvers         An array where each element contains a
     *                                  reference to a specific offer or
     *                                  consideration, a token identifier, and a
     *                                  proof that the supplied token identifier
     *                                  is contained in the merkle root held by
     *                                  the item in question's criteria element.
     *                                  Note that an empty criteria indicates
     *                                  that any (transferable) token
     *                                  identifier on the token in question is
     *                                  valid and that no associated proof needs
     *                                  to be supplied.
     * @param offerFulfillments         An array of FulfillmentComponent arrays
     *                                  indicating which offer items to attempt
     *                                  to aggregate when preparing executions.
     * @param considerationFulfillments An array of FulfillmentComponent arrays
     *                                  indicating which consideration items to
     *                                  attempt to aggregate when preparing
     *                                  executions.
     * @param fulfillerConduitKey       A bytes32 value indicating what conduit,
     *                                  if any, to source the fulfiller's token
     *                                  approvals from. The zero hash signifies
     *                                  that no conduit should be used (and
     *                                  direct approvals set on Consideration).
     * @param recipient                 The intended recipient for all received
     *                                  items.
     * @param maximumFulfilled          The maximum number of orders to fulfill.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     * @return executions      An array of elements indicating the sequence of
     *                         transfers performed as part of matching the given
     *                         orders.
     */
    function _fulfillAvailableAdvancedOrders(
        AdvancedOrder[] memory advancedOrders,
        CriteriaResolver[] memory criteriaResolvers,
        FulfillmentComponent[][] memory offerFulfillments,
        FulfillmentComponent[][] memory considerationFulfillments,
        bytes32 fulfillerConduitKey,
        address recipient,
        uint256 maximumFulfilled
    )
        internal
        returns (
            bool[] memory /* availableOrders */,
            Execution[] memory /* executions */
        )
    {
        // Create a `false` boolean variable to indicate that invalid orders
        // should NOT revert. Does not use a constant to avoid function
        // specialization in solc that would increase contract size.
        bool revertOnInvalid = _runTimeConstantFalse();
        // Validate orders, apply amounts, & determine if they use conduits.
        (
            bytes32[] memory orderHashes,
            bool containsNonOpen
        ) = _validateOrdersAndPrepareToFulfill(
                advancedOrders,
                criteriaResolvers,
                revertOnInvalid,
                maximumFulfilled,
                recipient
            );
        // Aggregate used offer and consideration items and execute transfers.
        return
            _executeAvailableFulfillments(
                advancedOrders,
                offerFulfillments,
                considerationFulfillments,
                fulfillerConduitKey,
                recipient,
                orderHashes,
                containsNonOpen
            );
    }
    /**
     * @dev Internal function to validate a group of orders, update their
     *      statuses, reduce amounts by their previously filled fractions, apply
     *      criteria resolvers, and emit OrderFulfilled events. Note that this
     *      function needs to be called before
     *      _aggregateValidFulfillmentConsiderationItems to set the memory
     *      layout that _aggregateValidFulfillmentConsiderationItems depends on.
     *
     * @param advancedOrders    The advanced orders to validate and reduce by
     *                          their previously filled amounts.
     * @param criteriaResolvers An array where each element contains a reference
     *                          to a specific order as well as that order's
     *                          offer or consideration, a token identifier, and
     *                          a proof that the supplied token identifier is
     *                          contained in the order's merkle root. Note that
     *                          a root of zero indicates that any transferable
     *                          token identifier is valid and that no proof
     *                          needs to be supplied.
     * @param revertOnInvalid   A boolean indicating whether to revert on any
     *                          order being invalid; setting this to false will
     *                          instead cause the invalid order to be skipped.
     * @param maximumFulfilled  The maximum number of orders to fulfill.
     * @param recipient         The intended recipient for all items that do not
     *                          already have a designated recipient and are not
     *                          already used as part of a provided fulfillment.
     *
     * @return orderHashes     The hashes of the orders being fulfilled.
     * @return containsNonOpen A boolean indicating whether any restricted or
     *                         contract orders are present within the provided
     *                         array of advanced orders.
     */
    function _validateOrdersAndPrepareToFulfill(
        AdvancedOrder[] memory advancedOrders,
        CriteriaResolver[] memory criteriaResolvers,
        bool revertOnInvalid,
        uint256 maximumFulfilled,
        address recipient
    ) internal returns (bytes32[] memory orderHashes, bool containsNonOpen) {
        // Ensure this function cannot be triggered during a reentrant call.
        _setReentrancyGuard(true); // Native tokens accepted during execution.
        // Declare "terminal memory offset" variable for use in efficient loops.
        uint256 terminalMemoryOffset;
        {
            // Declare an error buffer indicating status of any native offer
            // items. Native tokens may only be provided as part of contract
            // orders or when fulfilling via matchOrders or matchAdvancedOrders;
            // throw if bits indicating the conditions aren't met have been set.
            uint256 invalidNativeOfferItemErrorBuffer;
            // Use assembly to set the value for the second bit of error buffer.
            assembly {
                /**
                 * Use the 231st bit of the error buffer to indicate whether the
                 * current function is not matchAdvancedOrders or matchOrders.
                 *
                 * sig                                func
                 * -------------------------------------------------------------
                 * 1010100000010111010001000 0 000100 matchOrders
                 * 1111001011010001001010110 0 010010 matchAdvancedOrders
                 * 1110110110011000101001010 1 110100 fulfillAvailableOrders
                 * 1000011100100000000110110 1 000001 fulfillAvailableAdvanced
                 *                           ^ 7th bit
                 */
                invalidNativeOfferItemErrorBuffer := and(
                    NonMatchSelector_MagicMask,
                    calldataload(0)
                )
            }
            unchecked {
                // Read length of orders array and place on the stack.
                uint256 totalOrders = advancedOrders.length;
                // Track the order hash for each order being fulfilled.
                orderHashes = new bytes32[](totalOrders);
                // Determine the memory offset to terminate on during loops.
                terminalMemoryOffset = (totalOrders + 1) << OneWordShift;
            }
            // Skip overflow checks as for loops are indexed starting at zero.
            unchecked {
                // Declare variable to track if order is not a contract order.
                bool isNonContract;
                // Iterate over each order.
                for (
                    uint256 i = OneWord;
                    i < terminalMemoryOffset;
                    i += OneWord
                ) {
                    // Retrieve order via pointer to bypass out-of-range check &
                    // cast function to avoid additional memory allocation.
                    AdvancedOrder memory advancedOrder = (
                        _getReadAdvancedOrderByOffset()(advancedOrders, i)
                    );
                    // Validate it, update status, & determine fraction to fill.
                    (
                        bytes32 orderHash,
                        uint256 numerator,
                        uint256 denominator
                    ) = _validateOrder(advancedOrder, revertOnInvalid);
                    // Update the numerator on the order in question.
                    advancedOrder.numerator = uint120(numerator);
                    // Do not track hash or adjust prices if order is skipped.
                    if (numerator == 0) {
                        // Continue iterating through the remaining orders.
                        continue;
                    }
                    // Update the denominator on the order in question.
                    advancedOrder.denominator = uint120(denominator);
                    // Otherwise, track the order hash in question.
                    assembly {
                        mstore(add(orderHashes, i), orderHash)
                    }
                    // Place the start time for the order on the stack.
                    uint256 startTime = advancedOrder.parameters.startTime;
                    // Place the end time for the order on the stack.
                    uint256 endTime = advancedOrder.parameters.endTime;
                    {
                        // Determine order type, used to check for eligibility
                        // for native token offer items as well as for presence
                        // of restricted and contract orders or non-open orders.
                        OrderType orderType = (
                            advancedOrder.parameters.orderType
                        );
                        // Utilize assembly to efficiently check order types.
                        // Note these checks expect that there are no order
                        // types beyond current set (0-4) and will need to be
                        // modified if more order types are added.
                        assembly {
                            // Assign the variable indicating if the order is
                            // not a contract order.
                            isNonContract := lt(orderType, 4)
                            // Update the variable indicating if order is not an
                            // open order & keep set if it has been set already.
                            containsNonOpen := or(
                                containsNonOpen,
                                gt(orderType, 1)
                            )
                        }
                    }
                    // Retrieve array of offer items for the order in question.
                    OfferItem[] memory offer = advancedOrder.parameters.offer;
                    // Read length of offer array and place on the stack.
                    uint256 totalOfferItems = offer.length;
                    // Iterate over each offer item on the order.
                    for (uint256 j = 0; j < totalOfferItems; ++j) {
                        // Retrieve the offer item.
                        OfferItem memory offerItem = offer[j];
                        // If the offer item is for the native token and the
                        // order type is not a contract order type, set the
                        // first bit of the error buffer to true.
                        assembly {
                            invalidNativeOfferItemErrorBuffer := or(
                                invalidNativeOfferItemErrorBuffer,
                                lt(mload(offerItem), isNonContract)
                            )
                        }
                        // Apply order fill fraction to offer item end amount.
                        uint256 endAmount = _getFraction(
                            numerator,
                            denominator,
                            offerItem.endAmount
                        );
                        // Reuse same fraction if start & end amounts are equal.
                        if (offerItem.startAmount == offerItem.endAmount) {
                            // Apply derived amount to both start & end amount.
                            offerItem.startAmount = endAmount;
                        } else {
                            // Apply order fill fraction to item start amount.
                            offerItem.startAmount = _getFraction(
                                numerator,
                                denominator,
                                offerItem.startAmount
                            );
                        }
                        // Adjust offer amount using current time; round down.
                        uint256 currentAmount = _locateCurrentAmount(
                            offerItem.startAmount,
                            endAmount,
                            startTime,
                            endTime,
                            _runTimeConstantFalse() // round down
                        );
                        // Update amounts in memory to match the current amount.
                        // Note the end amount is used to track spent amounts.
                        offerItem.startAmount = currentAmount;
                        offerItem.endAmount = currentAmount;
                    }
                    // Retrieve consideration item array for order in question.
                    ConsiderationItem[] memory consideration = (
                        advancedOrder.parameters.consideration
                    );
                    // Read length of consideration array and place on stack.
                    uint256 totalConsiderationItems = consideration.length;
                    // Iterate over each consideration item on the order.
                    for (uint256 j = 0; j < totalConsiderationItems; ++j) {
                        // Retrieve the consideration item.
                        ConsiderationItem memory considerationItem = (
                            consideration[j]
                        );
                        // Apply fraction to consideration item end amount.
                        uint256 endAmount = _getFraction(
                            numerator,
                            denominator,
                            considerationItem.endAmount
                        );
                        // Reuse same fraction if start & end amounts are equal.
                        if (
                            considerationItem.startAmount ==
                            considerationItem.endAmount
                        ) {
                            // Apply derived amount to both start & end amount.
                            considerationItem.startAmount = endAmount;
                        } else {
                            // Apply fraction to item start amount.
                            considerationItem.startAmount = _getFraction(
                                numerator,
                                denominator,
                                considerationItem.startAmount
                            );
                        }
                        // Adjust amount using current time; round up.
                        uint256 currentAmount = (
                            _locateCurrentAmount(
                                considerationItem.startAmount,
                                endAmount,
                                startTime,
                                endTime,
                                _runTimeConstantTrue() // round up
                            )
                        );
                        // Set the start amount as equal to the current amount.
                        considerationItem.startAmount = currentAmount;
                        // Utilize assembly to manually "shift" the recipient
                        // value, then copy the start amount to the recipient.
                        // Note that this sets up the memory layout that is
                        // subsequently relied upon by
                        // _aggregateValidFulfillmentConsiderationItems as well
                        // as during comparison to generated contract orders.
                        assembly {
                            // Derive pointer to the recipient using the item
                            // pointer along with the offset to the recipient.
                            let considerationItemRecipientPtr := add(
                                considerationItem,
                                ConsiderationItem_recipient_offset
                            )
                            // Write recipient to endAmount, as endAmount is not
                            // used from this point on and can be repurposed to
                            // fit the layout of a ReceivedItem.
                            mstore(
                                add(
                                    considerationItem,
                                    // Note that this value used to be endAmount
                                    ReceivedItem_recipient_offset
                                ),
                                mload(considerationItemRecipientPtr)
                            )
                            // Write startAmount to recipient, as recipient is
                            // not used from this point on and can be repurposed
                            // to track received amounts.
                            mstore(considerationItemRecipientPtr, currentAmount)
                        }
                    }
                }
            }
            // If the first bit is set, a native offer item was encountered on
            // an order that is not a contract order. If the 231st bit is set in
            // the error buffer, the current function is not matchOrders or
            // matchAdvancedOrders. If the value is 1 + (1 << 230), then both
            // 1st and 231st bits were set; in that case, revert with an error.
            if (
                invalidNativeOfferItemErrorBuffer ==
                NonMatchSelector_InvalidErrorValue
            ) {
                _revertInvalidNativeOfferItem();
            }
        }
        // Apply criteria resolvers to each order as applicable.
        _applyCriteriaResolvers(advancedOrders, criteriaResolvers);
        // Iterate over each order to check authorization status (for restricted
        // orders), generate orders (for contract orders), and emit events (for
        // all available orders) signifying that they have been fulfilled.
        // Skip overflow checks as all for loops are indexed starting at zero.
        unchecked {
            // Declare stack variable outside of the loop to track order hash.
            bytes32 orderHash;
            // Track whether any orders are still available for fulfillment.
            bool someOrderAvailable = false;
            // Iterate over each order.
            for (uint256 i = OneWord; i < terminalMemoryOffset; i += OneWord) {
                // Retrieve order hash, bypassing out-of-range check.
                assembly {
                    orderHash := mload(add(orderHashes, i))
                }
                // Do not emit an event if no order hash is present.
                if (orderHash == bytes32(0)) {
                    continue;
                }
                // Retrieve order using pointer libraries to bypass out-of-range
                // check & cast function to avoid additional memory allocation.
                AdvancedOrder memory advancedOrder = (
                    _getReadAdvancedOrderByOffset()(advancedOrders, i)
                );
                // Determine if max number orders have already been fulfilled.
                if (maximumFulfilled == 0) {
                    // If so, set the order hash to zero.
                    assembly {
                        mstore(add(orderHashes, i), 0)
                    }
                    // Set the numerator to zero to signal to skip the order.
                    advancedOrder.numerator = 0;
                    // Continue iterating through the remaining orders.
                    continue;
                }
                // Handle final checks and status updates based on order type.
                if (advancedOrder.parameters.orderType != OrderType.CONTRACT) {
                    // Check authorization for restricted orders.
                    if (
                        !_checkRestrictedAdvancedOrderAuthorization(
                            advancedOrder,
                            orderHashes,
                            orderHash,
                            (i >> OneWordShift) - 1,
                            revertOnInvalid
                        )
                    ) {
                        // If authorization check fails, set order hash to zero.
                        assembly {
                            mstore(add(orderHashes, i), 0)
                        }
                        // Set numerator to zero to signal to skip the order.
                        advancedOrder.numerator = 0;
                        // Continue iterating through the remaining orders.
                        continue;
                    }
                    // Update status as long as some fraction is available.
                    if (
                        !_updateStatus(
                            orderHash,
                            advancedOrder.numerator,
                            advancedOrder.denominator,
                            _revertOnFailedUpdate(
                                advancedOrder.parameters,
                                revertOnInvalid
                            )
                        )
                    ) {
                        // If status update fails, set the order hash to zero.
                        assembly {
                            mstore(add(orderHashes, i), 0)
                        }
                        // Set numerator to zero to signal to skip the order.
                        advancedOrder.numerator = 0;
                        // Continue iterating through the remaining orders.
                        continue;
                    }
                } else {
                    // Return the generated order based on the order params and
                    // the provided extra data. If revertOnInvalid is true, the
                    // function will revert if the input is invalid.
                    orderHash = _getGeneratedOrder(
                        advancedOrder.parameters,
                        advancedOrder.extraData,
                        revertOnInvalid
                    );
                    // Write the derived order hash to the order hashes array.
                    assembly {
                        mstore(add(orderHashes, i), orderHash)
                    }
                    // Handle invalid orders, indicated by a zero order hash.
                    if (orderHash == bytes32(0)) {
                        // Set numerator to zero to signal to skip the order.
                        advancedOrder.numerator = 0;
                        // Continue iterating through the remaining orders.
                        continue;
                    }
                }
                // Decrement the number of fulfilled orders.
                // Skip underflow check as the condition before
                // implies that maximumFulfilled > 0.
                --maximumFulfilled;
                // Retrieve parameters for the order in question.
                OrderParameters memory orderParameters = (
                    advancedOrder.parameters
                );
                // Emit an OrderFulfilled event.
                _emitOrderFulfilledEvent(
                    orderHash,
                    orderParameters.offerer,
                    orderParameters.zone,
                    recipient,
                    orderParameters.offer,
                    orderParameters.consideration
                );
                // Set the flag indicating that some order is available.
                someOrderAvailable = true;
            }
            // Revert if no orders are available.
            if (!someOrderAvailable) {
                _revertNoSpecifiedOrdersAvailable();
            }
        }
    }
    /**
     * @dev Internal function to fulfill a group of validated orders, fully or
     *      partially, with an arbitrary number of items for offer and
     *      consideration per order and to execute transfers. Any order that is
     *      not currently active, has already been fully filled, or has been
     *      cancelled will be omitted. Remaining offer and consideration items
     *      will then be aggregated where possible as indicated by the supplied
     *      offer and consideration component arrays and aggregated items will
     *      be transferred to the fulfiller or to each intended recipient,
     *      respectively. Note that a failing item transfer or an issue with
     *      order formatting will cause the entire batch to fail.
     *
     * @param advancedOrders            The orders to fulfill along with the
     *                                  fraction of those orders to attempt to
     *                                  fill. Note that both the offerer and the
     *                                  fulfiller must first approve this
     *                                  contract (or the conduit if indicated by
     *                                  the order) to transfer any relevant
     *                                  tokens on their behalf and that
     *                                  contracts must implement
     *                                  `onERC1155Received` in order to receive
     *                                  ERC1155 tokens as consideration. Also
     *                                  note that all offer and consideration
     *                                  components must have no remainder after
     *                                  multiplication of the respective amount
     *                                  with the supplied fraction for an
     *                                  order's partial fill amount to be
     *                                  considered valid.
     * @param offerFulfillments         An array of FulfillmentComponent arrays
     *                                  indicating which offer items to attempt
     *                                  to aggregate when preparing executions.
     * @param considerationFulfillments An array of FulfillmentComponent arrays
     *                                  indicating which consideration items to
     *                                  attempt to aggregate when preparing
     *                                  executions.
     * @param fulfillerConduitKey       A bytes32 value indicating what conduit,
     *                                  if any, to source the fulfiller's token
     *                                  approvals from. The zero hash signifies
     *                                  that no conduit should be used, with
     *                                  direct approvals set on Consideration.
     * @param recipient                 The intended recipient for all items
     *                                  that do not already have a designated
     *                                  recipient and are not already used as
     *                                  part of a provided fulfillment.
     * @param orderHashes               An array of order hashes for each order.
     * @param containsNonOpen           A boolean indicating whether any
     *                                  restricted or contract orders are
     *                                  present within the provided array of
     *                                  advanced orders.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     * @return executions      An array of elements indicating the sequence of
     *                         transfers performed as part of matching the given
     *                         orders.
     */
    function _executeAvailableFulfillments(
        AdvancedOrder[] memory advancedOrders,
        FulfillmentComponent[][] memory offerFulfillments,
        FulfillmentComponent[][] memory considerationFulfillments,
        bytes32 fulfillerConduitKey,
        address recipient,
        bytes32[] memory orderHashes,
        bool containsNonOpen
    )
        internal
        returns (bool[] memory availableOrders, Execution[] memory executions)
    {
        // Retrieve length of offer fulfillments array and place on the stack.
        uint256 totalOfferFulfillments = offerFulfillments.length;
        // Retrieve length of consideration fulfillments array & place on stack.
        uint256 totalConsiderationFulfillments = (
            considerationFulfillments.length
        );
        // Allocate an execution for each offer and consideration fulfillment.
        executions = new Execution[](
            totalOfferFulfillments + totalConsiderationFulfillments
        );
        // Skip overflow checks as all for loops are indexed starting at zero.
        unchecked {
            // Iterate over each offer fulfillment.
            for (uint256 i = 0; i < totalOfferFulfillments; ++i) {
                // Derive aggregated execution corresponding with fulfillment
                // and assign it to the executions array.
                executions[i] = _aggregateAvailable(
                    advancedOrders,
                    Side.OFFER,
                    offerFulfillments[i],
                    fulfillerConduitKey,
                    recipient
                );
            }
            // Iterate over each consideration fulfillment.
            for (uint256 i = 0; i < totalConsiderationFulfillments; ++i) {
                // Derive aggregated execution corresponding with fulfillment
                // and assign it to the executions array.
                executions[i + totalOfferFulfillments] = _aggregateAvailable(
                    advancedOrders,
                    Side.CONSIDERATION,
                    considerationFulfillments[i],
                    fulfillerConduitKey,
                    address(0) // unused
                );
            }
        }
        // Perform final checks and return.
        availableOrders = _performFinalChecksAndExecuteOrders(
            advancedOrders,
            executions,
            orderHashes,
            recipient,
            containsNonOpen
        );
        return (availableOrders, executions);
    }
    /**
     * @dev Internal function to perform a final check that each consideration
     *      item for an arbitrary number of fulfilled orders has been met and to
     *      trigger associated executions, transferring the respective items.
     *
     * @param advancedOrders  The orders to check and perform executions for.
     * @param executions      An array of elements indicating the sequence of
     *                        transfers to perform when fulfilling the given
     *                        orders.
     * @param orderHashes     An array of order hashes for each order.
     * @param recipient       The intended recipient for all items that do not
     *                        already have a designated recipient and are not
     *                        used as part of a provided fulfillment.
     * @param containsNonOpen A boolean indicating whether any restricted or
     *                        contract orders are present within the provided
     *                        array of advanced orders.
     *
     * @return availableOrders An array of booleans indicating if each order
     *                         with an index corresponding to the index of the
     *                         returned boolean was fulfillable or not.
     */
    function _performFinalChecksAndExecuteOrders(
        AdvancedOrder[] memory advancedOrders,
        Execution[] memory executions,
        bytes32[] memory orderHashes,
        address recipient,
        bool containsNonOpen
    ) internal returns (bool[] memory /* availableOrders */) {
        // Retrieve the length of the advanced orders array and place on stack.
        uint256 totalOrders = advancedOrders.length;
        // Initialize array for tracking available orders.
        bool[] memory availableOrders = new bool[](totalOrders);
        // Initialize an accumulator array. From this point forward, no new
        // memory regions can be safely allocated until the accumulator is no
        // longer being utilized, as the accumulator operates in an open-ended
        // fashion from this memory pointer; existing memory may still be
        // accessed and modified, however.
        bytes memory accumulator = new bytes(AccumulatorDisarmed);
        // Skip overflow check: loop index & executions length are both bounded.
        unchecked {
            // Determine the memory offset to terminate on during loops.
            uint256 terminalMemoryOffset = ((executions.length + 1) <<
                OneWordShift);
            // Iterate over each execution.
            for (uint256 i = OneWord; i < terminalMemoryOffset; i += OneWord) {
                // Get execution using pointer libraries to bypass out-of-range
                // check & cast function to avoid additional memory allocation.
                Execution memory execution = (
                    _getReadExecutionByOffset()(executions, i)
                );
                // Retrieve the associated received item and amount.
                ReceivedItem memory item = execution.item;
                uint256 amount = item.amount;
                // Transfer the item specified by the execution as long as the
                // execution is not a zero-amount execution (which can occur if
                // the corresponding fulfillment contained only items on orders
                // that are unavailable or are out of range of the respective
                // item array).
                if (amount != 0) {
                    // Utilize assembly to check for native token balance.
                    assembly {
                        // Ensure a sufficient native balance if relevant.
                        if and(
                            iszero(mload(item)), // itemType == ItemType.NATIVE
                            // item.amount > address(this).balance
                            gt(amount, selfbalance())
                        ) {
                            // Store left-padded selector with push4,
                            // mem[28:32] = selector
                            mstore(
                                0,
                                InsufficientNativeTokensSupplied_error_selector
                            )
                            // revert(abi.encodeWithSignature(
                            //   "InsufficientNativeTokensSupplied()"
                            // ))
                            revert(
                                Error_selector_offset,
                                InsufficientNativeTokensSupplied_error_length
                            )
                        }
                    }
                    // Transfer the item specified by the execution.
                    _transfer(
                        item,
                        execution.offerer,
                        execution.conduitKey,
                        accumulator
                    );
                }
            }
        }
        // Skip overflow checks as all for loops are indexed starting at zero.
        unchecked {
            // Iterate over each order.
            for (uint256 i = 0; i < totalOrders; ++i) {
                // Retrieve the order in question.
                AdvancedOrder memory advancedOrder = advancedOrders[i];
                // Skip the order in question if not being not fulfilled.
                if (advancedOrder.numerator == 0) {
                    // Explicitly set availableOrders at the given index to
                    // guard against the possibility of dirtied memory.
                    availableOrders[i] = false;
                    continue;
                }
                // Mark the order as available.
                availableOrders[i] = true;
                // Retrieve the order parameters.
                OrderParameters memory parameters = advancedOrder.parameters;
                {
                    // Retrieve offer items.
                    OfferItem[] memory offer = parameters.offer;
                    // Read length of offer array & place on the stack.
                    uint256 totalOfferItems = offer.length;
                    // Iterate over each offer item to restore it.
                    for (uint256 j = 0; j < totalOfferItems; ++j) {
                        // Retrieve the offer item in question.
                        OfferItem memory offerItem = offer[j];
                        // Transfer to recipient if unspent amount is not zero.
                        // Note that the transfer will not be reflected in the
                        // executions array.
                        if (offerItem.startAmount != 0) {
                            // Replace endAmount parameter with the recipient to
                            // make offerItem compatible with the ReceivedItem
                            // input to _transfer & cache the original endAmount
                            // so it can be restored after the transfer.
                            uint256 originalEndAmount = (
                                _replaceEndAmountWithRecipient(
                                    offerItem,
                                    recipient
                                )
                            );
                            // Transfer excess offer item amount to recipient.
                            _toOfferItemInput(_transfer)(
                                offerItem,
                                parameters.offerer,
                                parameters.conduitKey,
                                accumulator
                            );
                            // Restore the original endAmount in offerItem.
                            assembly {
                                mstore(
                                    add(
                                        offerItem,
                                        ReceivedItem_recipient_offset
                                    ),
                                    originalEndAmount
                                )
                            }
                        }
                        // Restore original amount on the offer item.
                        offerItem.startAmount = offerItem.endAmount;
                    }
                }
                {
                    // Read consideration items & ensure they are fulfilled.
                    ConsiderationItem[] memory consideration = (
                        parameters.consideration
                    );
                    // Read length of consideration array & place on stack.
                    uint256 totalConsiderationItems = consideration.length;
                    // Iterate over each consideration item.
                    for (uint256 j = 0; j < totalConsiderationItems; ++j) {
                        ConsiderationItem memory considerationItem = (
                            consideration[j]
                        );
                        // Retrieve remaining amount on consideration item.
                        uint256 unmetAmount = considerationItem.startAmount;
                        // Revert if the remaining amount is not zero.
                        if (unmetAmount != 0) {
                            _revertConsiderationNotMet(i, j, unmetAmount);
                        }
                        // Utilize assembly to restore the original value.
                        assembly {
                            // Write recipient to startAmount.
                            mstore(
                                add(
                                    considerationItem,
                                    ReceivedItem_amount_offset
                                ),
                                mload(
                                    add(
                                        considerationItem,
                                        ConsiderationItem_recipient_offset
                                    )
                                )
                            )
                        }
                    }
                }
            }
        }
        // Trigger any accumulated transfers via call to the conduit.
        _triggerIfArmed(accumulator);
        // Determine whether any native token balance remains.
        uint256 remainingNativeTokenBalance;
        assembly {
            remainingNativeTokenBalance := selfbalance()
        }
        // Return any remaining native token balance to the caller.
        if (remainingNativeTokenBalance != 0) {
            _transferNativeTokens(
                payable(msg.sender),
                remainingNativeTokenBalance
            );
        }
        // If any restricted or contract orders are present in the group of
        // orders being fulfilled, perform any validateOrder or ratifyOrder
        // calls after all executions and related transfers are complete.
        if (containsNonOpen) {
            // Iterate over each order a second time.
            for (uint256 i = 0; i < totalOrders; ) {
                // Ensure the order in question is being fulfilled.
                if (availableOrders[i]) {
                    // Check restricted orders and contract orders.
                    _assertRestrictedAdvancedOrderValidity(
                        advancedOrders[i],
                        orderHashes,
                        orderHashes[i]
                    );
                }
                // Skip overflow checks as for loop is indexed starting at zero.
                unchecked {
                    ++i;
                }
            }
        }
        // Clear the reentrancy guard.
        _clearReentrancyGuard();
        // Return the array containing available orders.
        return availableOrders;
    }
    /**
     * @dev Internal function to emit an OrdersMatched event using the same
     *      memory region as the existing order hash array.
     *
     * @param orderHashes An array of order hashes to include as an argument for
     *                    the OrdersMatched event.
     */
    function _emitOrdersMatched(bytes32[] memory orderHashes) internal {
        assembly {
            // Load the array length from memory.
            let length := mload(orderHashes)
            // Get the full size of the event data - one word for the offset,
            // one for the array length and one per hash.
            let dataSize := add(TwoWords, shl(OneWordShift, length))
            // Get pointer to start of data, reusing word before array length
            // for the offset.
            let dataPointer := sub(orderHashes, OneWord)
            // Cache the existing word in memory at the offset pointer.
            let cache := mload(dataPointer)
            // Write an offset of 32.
            mstore(dataPointer, OneWord)
            // Emit the OrdersMatched event.
            log1(dataPointer, dataSize, OrdersMatchedTopic0)
            // Restore the cached word.
            mstore(dataPointer, cache)
        }
    }
    /**
     * @dev Internal function to match an arbitrary number of full or partial
     *      orders, each with an arbitrary number of items for offer and
     *      consideration, supplying criteria resolvers containing specific
     *      token identifiers and associated proofs as well as fulfillments
     *      allocating offer components to consideration components.
     *
     * @param advancedOrders    The advanced orders to match. Note that both the
     *                          offerer and fulfiller on each order must first
     *                          approve this contract (or their conduit if
     *                          indicated by the order) to transfer any relevant
     *                          tokens on their behalf and each consideration
     *                          recipient must implement `onERC1155Received` in
     *                          order to receive ERC1155 tokens. Also note that
     *                          the offer and consideration components for each
     *                          order must have no remainder after multiplying
     *                          the respective amount with the supplied fraction
     *                          in order for the group of partial fills to be
     *                          considered valid.
     * @param criteriaResolvers An array where each element contains a reference
     *                          to a specific order as well as that order's
     *                          offer or consideration, a token identifier, and
     *                          a proof that the supplied token identifier is
     *                          contained in the order's merkle root. Note that
     *                          an empty root indicates that any (transferable)
     *                          token identifier is valid and that no associated
     *                          proof needs to be supplied.
     * @param fulfillments      An array of elements allocating offer components
     *                          to consideration components. Note that each
     *                          consideration component must be fully met in
     *                          order for the match operation to be valid.
     * @param recipient         The intended recipient for all unspent offer
     *                          item amounts.
     *
     * @return executions An array of elements indicating the sequence of
     *                    transfers performed as part of matching the given
     *                    orders.
     */
    function _matchAdvancedOrders(
        AdvancedOrder[] memory advancedOrders,
        CriteriaResolver[] memory criteriaResolvers,
        Fulfillment[] memory fulfillments,
        address recipient
    ) internal returns (Execution[] memory /* executions */) {
        // Create a `true` boolean variable to indicate that invalid orders
        // should revert. Does not use a constant to avoid function
        // specialization in solc that would increase contract size.
        bool revertOnInvalid = _runTimeConstantTrue();
        // Validate orders, update order status, and determine item amounts.
        (
            bytes32[] memory orderHashes,
            bool containsNonOpen
        ) = _validateOrdersAndPrepareToFulfill(
                advancedOrders,
                criteriaResolvers,
                revertOnInvalid,
                advancedOrders.length,
                recipient
            );
        // Emit OrdersMatched event, providing an array of matched order hashes.
        _emitOrdersMatched(orderHashes);
        // Fulfill the orders using the supplied fulfillments and recipient.
        return
            _fulfillAdvancedOrders(
                advancedOrders,
                fulfillments,
                orderHashes,
                recipient,
                containsNonOpen
            );
    }
    /**
     * @dev Internal function to fulfill an arbitrary number of orders, either
     *      full or partial, after validating, adjusting amounts, and applying
     *      criteria resolvers.
     *
     * @param advancedOrders  The orders to match, including a fraction to
     *                        attempt to fill for each order.
     * @param fulfillments    An array of elements allocating offer components
     *                        to consideration components. Note that the final
     *                        amount of each consideration component must be
     *                        zero for a match operation to be considered valid.
     * @param orderHashes     An array of order hashes for each order.
     * @param recipient       The intended recipient for all items that do not
     *                        already have a designated recipient and are not
     *                        used as part of a provided fulfillment.
     * @param containsNonOpen A boolean indicating whether any restricted or
     *                        contract orders are present within the provided
     *                        array of advanced orders.
     *
     * @return executions An array of elements indicating the sequence of
     *                    transfers performed as part of matching the given
     *                    orders.
     */
    function _fulfillAdvancedOrders(
        AdvancedOrder[] memory advancedOrders,
        Fulfillment[] memory fulfillments,
        bytes32[] memory orderHashes,
        address recipient,
        bool containsNonOpen
    ) internal returns (Execution[] memory executions) {
        // Retrieve fulfillments array length and place on the stack.
        uint256 totalFulfillments = fulfillments.length;
        // Allocate executions by fulfillment and apply them to each execution.
        executions = new Execution[](totalFulfillments);
        // Skip overflow checks as all for loops are indexed starting at zero.
        unchecked {
            // Iterate over each fulfillment.
            for (uint256 i = 0; i < totalFulfillments; ++i) {
                /// Retrieve the fulfillment in question.
                Fulfillment memory fulfillment = fulfillments[i];
                // Derive the execution corresponding with the fulfillment and
                // assign it to the executions array.
                executions[i] = _applyFulfillment(
                    advancedOrders,
                    fulfillment.offerComponents,
                    fulfillment.considerationComponents,
                    i
                );
            }
        }
        // Perform final checks and execute orders.
        _performFinalChecksAndExecuteOrders(
            advancedOrders,
            executions,
            orderHashes,
            recipient,
            containsNonOpen
        );
        // Return the executions array.
        return executions;
    }
    /**
     * @dev Internal view function to determine whether a status update failure
     *      should cause a revert or allow a skipped order. The call must revert
     *      if an `authorizeOrder` call has been successfully performed and the
     *      status update cannot be performed, regardless of whether the order
     *      could be otherwise marked as skipped. Note that a revert is not
     *      required on a failed update if the call originates from the zone, as
     *      no `authorizeOrder` call is performed in that case.
     *
     * @param orderParameters The order parameters in question.
     * @param revertOnInvalid A boolean indicating whether the call should
     *                        revert for non-restricted order types.
     *
     * @return revertOnFailedUpdate A boolean indicating whether the order
     *                              should revert on a failed status update.
     */
    function _revertOnFailedUpdate(
        OrderParameters memory orderParameters,
        bool revertOnInvalid
    ) internal view returns (bool revertOnFailedUpdate) {
        OrderType orderType = orderParameters.orderType;
        address zone = orderParameters.zone;
        assembly {
            revertOnFailedUpdate := or(
                revertOnInvalid,
                and(gt(orderType, 1), iszero(eq(caller(), zone)))
            )
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
type CalldataPointer is uint256;
type ReturndataPointer is uint256;
type MemoryPointer is uint256;
using CalldataPointerLib for CalldataPointer global;
using MemoryPointerLib for MemoryPointer global;
using ReturndataPointerLib for ReturndataPointer global;
using CalldataReaders for CalldataPointer global;
using ReturndataReaders for ReturndataPointer global;
using MemoryReaders for MemoryPointer global;
using MemoryWriters for MemoryPointer global;
CalldataPointer constant CalldataStart = CalldataPointer.wrap(0x04);
MemoryPointer constant FreeMemoryPPtr = MemoryPointer.wrap(0x40);
MemoryPointer constant ZeroSlotPtr = MemoryPointer.wrap(0x60);
uint256 constant IdentityPrecompileAddress = 0x4;
uint256 constant OffsetOrLengthMask = 0xffffffff;
uint256 constant _OneWord = 0x20;
uint256 constant _FreeMemoryPointerSlot = 0x40;
/// @dev Allocates `size` bytes in memory by increasing the free memory pointer
///    and returns the memory pointer to the first byte of the allocated region.
// (Free functions cannot have visibility.)
// solhint-disable-next-line func-visibility
function malloc(uint256 size) pure returns (MemoryPointer mPtr) {
    assembly {
        mPtr := mload(_FreeMemoryPointerSlot)
        mstore(_FreeMemoryPointerSlot, add(mPtr, size))
    }
}
// (Free functions cannot have visibility.)
// solhint-disable-next-line func-visibility
function getFreeMemoryPointer() pure returns (MemoryPointer mPtr) {
    mPtr = FreeMemoryPPtr.readMemoryPointer();
}
// (Free functions cannot have visibility.)
// solhint-disable-next-line func-visibility
function setFreeMemoryPointer(MemoryPointer mPtr) pure {
    FreeMemoryPPtr.write(mPtr);
}
library CalldataPointerLib {
    function lt(
        CalldataPointer a,
        CalldataPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := lt(a, b)
        }
    }
    function gt(
        CalldataPointer a,
        CalldataPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := gt(a, b)
        }
    }
    function eq(
        CalldataPointer a,
        CalldataPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := eq(a, b)
        }
    }
    function isNull(CalldataPointer a) internal pure returns (bool b) {
        assembly {
            b := iszero(a)
        }
    }
    /// @dev Resolves an offset stored at `cdPtr + headOffset` to a calldata.
    ///      pointer `cdPtr` must point to some parent object with a dynamic
    ///      type's head stored at `cdPtr + headOffset`.
    function pptrOffset(
        CalldataPointer cdPtr,
        uint256 headOffset
    ) internal pure returns (CalldataPointer cdPtrChild) {
        cdPtrChild = cdPtr.offset(
            cdPtr.offset(headOffset).readUint256() & OffsetOrLengthMask
        );
    }
    /// @dev Resolves an offset stored at `cdPtr` to a calldata pointer.
    ///      `cdPtr` must point to some parent object with a dynamic type as its
    ///      first member, e.g. `struct { bytes data; }`
    function pptr(
        CalldataPointer cdPtr
    ) internal pure returns (CalldataPointer cdPtrChild) {
        cdPtrChild = cdPtr.offset(cdPtr.readUint256() & OffsetOrLengthMask);
    }
    /// @dev Returns the calldata pointer one word after `cdPtr`.
    function next(
        CalldataPointer cdPtr
    ) internal pure returns (CalldataPointer cdPtrNext) {
        assembly {
            cdPtrNext := add(cdPtr, _OneWord)
        }
    }
    /// @dev Returns the calldata pointer `_offset` bytes after `cdPtr`.
    function offset(
        CalldataPointer cdPtr,
        uint256 _offset
    ) internal pure returns (CalldataPointer cdPtrNext) {
        assembly {
            cdPtrNext := add(cdPtr, _offset)
        }
    }
    /// @dev Copies `size` bytes from calldata starting at `src` to memory at
    ///      `dst`.
    function copy(
        CalldataPointer src,
        MemoryPointer dst,
        uint256 size
    ) internal pure {
        assembly {
            calldatacopy(dst, src, size)
        }
    }
}
library ReturndataPointerLib {
    function lt(
        ReturndataPointer a,
        ReturndataPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := lt(a, b)
        }
    }
    function gt(
        ReturndataPointer a,
        ReturndataPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := gt(a, b)
        }
    }
    function eq(
        ReturndataPointer a,
        ReturndataPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := eq(a, b)
        }
    }
    function isNull(ReturndataPointer a) internal pure returns (bool b) {
        assembly {
            b := iszero(a)
        }
    }
    /// @dev Resolves an offset stored at `rdPtr + headOffset` to a returndata
    ///      pointer. `rdPtr` must point to some parent object with a dynamic
    ///      type's head stored at `rdPtr + headOffset`.
    function pptrOffset(
        ReturndataPointer rdPtr,
        uint256 headOffset
    ) internal pure returns (ReturndataPointer rdPtrChild) {
        rdPtrChild = rdPtr.offset(
            rdPtr.offset(headOffset).readUint256() & OffsetOrLengthMask
        );
    }
    /// @dev Resolves an offset stored at `rdPtr` to a returndata pointer.
    ///    `rdPtr` must point to some parent object with a dynamic type as its
    ///    first member, e.g. `struct { bytes data; }`
    function pptr(
        ReturndataPointer rdPtr
    ) internal pure returns (ReturndataPointer rdPtrChild) {
        rdPtrChild = rdPtr.offset(rdPtr.readUint256() & OffsetOrLengthMask);
    }
    /// @dev Returns the returndata pointer one word after `cdPtr`.
    function next(
        ReturndataPointer rdPtr
    ) internal pure returns (ReturndataPointer rdPtrNext) {
        assembly {
            rdPtrNext := add(rdPtr, _OneWord)
        }
    }
    /// @dev Returns the returndata pointer `_offset` bytes after `cdPtr`.
    function offset(
        ReturndataPointer rdPtr,
        uint256 _offset
    ) internal pure returns (ReturndataPointer rdPtrNext) {
        assembly {
            rdPtrNext := add(rdPtr, _offset)
        }
    }
    /// @dev Copies `size` bytes from returndata starting at `src` to memory at
    /// `dst`.
    function copy(
        ReturndataPointer src,
        MemoryPointer dst,
        uint256 size
    ) internal pure {
        assembly {
            returndatacopy(dst, src, size)
        }
    }
}
library MemoryPointerLib {
    function copy(
        MemoryPointer src,
        MemoryPointer dst,
        uint256 size
    ) internal view {
        assembly {
            let success := staticcall(
                gas(),
                IdentityPrecompileAddress,
                src,
                size,
                dst,
                size
            )
            if or(iszero(returndatasize()), iszero(success)) {
                revert(0, 0)
            }
        }
    }
    function lt(
        MemoryPointer a,
        MemoryPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := lt(a, b)
        }
    }
    function gt(
        MemoryPointer a,
        MemoryPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := gt(a, b)
        }
    }
    function eq(
        MemoryPointer a,
        MemoryPointer b
    ) internal pure returns (bool c) {
        assembly {
            c := eq(a, b)
        }
    }
    function isNull(MemoryPointer a) internal pure returns (bool b) {
        assembly {
            b := iszero(a)
        }
    }
    function hash(
        MemoryPointer ptr,
        uint256 length
    ) internal pure returns (bytes32 _hash) {
        assembly {
            _hash := keccak256(ptr, length)
        }
    }
    /// @dev Returns the memory pointer one word after `mPtr`.
    function next(
        MemoryPointer mPtr
    ) internal pure returns (MemoryPointer mPtrNext) {
        assembly {
            mPtrNext := add(mPtr, _OneWord)
        }
    }
    /// @dev Returns the memory pointer `_offset` bytes after `mPtr`.
    function offset(
        MemoryPointer mPtr,
        uint256 _offset
    ) internal pure returns (MemoryPointer mPtrNext) {
        assembly {
            mPtrNext := add(mPtr, _offset)
        }
    }
    /// @dev Resolves a pointer at `mPtr + headOffset` to a memory
    ///    pointer. `mPtr` must point to some parent object with a dynamic
    ///    type's pointer stored at `mPtr + headOffset`.
    function pptrOffset(
        MemoryPointer mPtr,
        uint256 headOffset
    ) internal pure returns (MemoryPointer mPtrChild) {
        mPtrChild = mPtr.offset(headOffset).readMemoryPointer();
    }
    /// @dev Resolves a pointer stored at `mPtr` to a memory pointer.
    ///    `mPtr` must point to some parent object with a dynamic type as its
    ///    first member, e.g. `struct { bytes data; }`
    function pptr(
        MemoryPointer mPtr
    ) internal pure returns (MemoryPointer mPtrChild) {
        mPtrChild = mPtr.readMemoryPointer();
    }
}
library CalldataReaders {
    /// @dev Reads the value at `cdPtr` and applies a mask to return only the
    ///    last 4 bytes.
    function readMaskedUint256(
        CalldataPointer cdPtr
    ) internal pure returns (uint256 value) {
        value = cdPtr.readUint256() & OffsetOrLengthMask;
    }
    /// @dev Reads the bool at `cdPtr` in calldata.
    function readBool(
        CalldataPointer cdPtr
    ) internal pure returns (bool value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the address at `cdPtr` in calldata.
    function readAddress(
        CalldataPointer cdPtr
    ) internal pure returns (address value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes1 at `cdPtr` in calldata.
    function readBytes1(
        CalldataPointer cdPtr
    ) internal pure returns (bytes1 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes2 at `cdPtr` in calldata.
    function readBytes2(
        CalldataPointer cdPtr
    ) internal pure returns (bytes2 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes3 at `cdPtr` in calldata.
    function readBytes3(
        CalldataPointer cdPtr
    ) internal pure returns (bytes3 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes4 at `cdPtr` in calldata.
    function readBytes4(
        CalldataPointer cdPtr
    ) internal pure returns (bytes4 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes5 at `cdPtr` in calldata.
    function readBytes5(
        CalldataPointer cdPtr
    ) internal pure returns (bytes5 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes6 at `cdPtr` in calldata.
    function readBytes6(
        CalldataPointer cdPtr
    ) internal pure returns (bytes6 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes7 at `cdPtr` in calldata.
    function readBytes7(
        CalldataPointer cdPtr
    ) internal pure returns (bytes7 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes8 at `cdPtr` in calldata.
    function readBytes8(
        CalldataPointer cdPtr
    ) internal pure returns (bytes8 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes9 at `cdPtr` in calldata.
    function readBytes9(
        CalldataPointer cdPtr
    ) internal pure returns (bytes9 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes10 at `cdPtr` in calldata.
    function readBytes10(
        CalldataPointer cdPtr
    ) internal pure returns (bytes10 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes11 at `cdPtr` in calldata.
    function readBytes11(
        CalldataPointer cdPtr
    ) internal pure returns (bytes11 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes12 at `cdPtr` in calldata.
    function readBytes12(
        CalldataPointer cdPtr
    ) internal pure returns (bytes12 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes13 at `cdPtr` in calldata.
    function readBytes13(
        CalldataPointer cdPtr
    ) internal pure returns (bytes13 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes14 at `cdPtr` in calldata.
    function readBytes14(
        CalldataPointer cdPtr
    ) internal pure returns (bytes14 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes15 at `cdPtr` in calldata.
    function readBytes15(
        CalldataPointer cdPtr
    ) internal pure returns (bytes15 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes16 at `cdPtr` in calldata.
    function readBytes16(
        CalldataPointer cdPtr
    ) internal pure returns (bytes16 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes17 at `cdPtr` in calldata.
    function readBytes17(
        CalldataPointer cdPtr
    ) internal pure returns (bytes17 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes18 at `cdPtr` in calldata.
    function readBytes18(
        CalldataPointer cdPtr
    ) internal pure returns (bytes18 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes19 at `cdPtr` in calldata.
    function readBytes19(
        CalldataPointer cdPtr
    ) internal pure returns (bytes19 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes20 at `cdPtr` in calldata.
    function readBytes20(
        CalldataPointer cdPtr
    ) internal pure returns (bytes20 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes21 at `cdPtr` in calldata.
    function readBytes21(
        CalldataPointer cdPtr
    ) internal pure returns (bytes21 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes22 at `cdPtr` in calldata.
    function readBytes22(
        CalldataPointer cdPtr
    ) internal pure returns (bytes22 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes23 at `cdPtr` in calldata.
    function readBytes23(
        CalldataPointer cdPtr
    ) internal pure returns (bytes23 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes24 at `cdPtr` in calldata.
    function readBytes24(
        CalldataPointer cdPtr
    ) internal pure returns (bytes24 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes25 at `cdPtr` in calldata.
    function readBytes25(
        CalldataPointer cdPtr
    ) internal pure returns (bytes25 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes26 at `cdPtr` in calldata.
    function readBytes26(
        CalldataPointer cdPtr
    ) internal pure returns (bytes26 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes27 at `cdPtr` in calldata.
    function readBytes27(
        CalldataPointer cdPtr
    ) internal pure returns (bytes27 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes28 at `cdPtr` in calldata.
    function readBytes28(
        CalldataPointer cdPtr
    ) internal pure returns (bytes28 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes29 at `cdPtr` in calldata.
    function readBytes29(
        CalldataPointer cdPtr
    ) internal pure returns (bytes29 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes30 at `cdPtr` in calldata.
    function readBytes30(
        CalldataPointer cdPtr
    ) internal pure returns (bytes30 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes31 at `cdPtr` in calldata.
    function readBytes31(
        CalldataPointer cdPtr
    ) internal pure returns (bytes31 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the bytes32 at `cdPtr` in calldata.
    function readBytes32(
        CalldataPointer cdPtr
    ) internal pure returns (bytes32 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint8 at `cdPtr` in calldata.
    function readUint8(
        CalldataPointer cdPtr
    ) internal pure returns (uint8 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint16 at `cdPtr` in calldata.
    function readUint16(
        CalldataPointer cdPtr
    ) internal pure returns (uint16 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint24 at `cdPtr` in calldata.
    function readUint24(
        CalldataPointer cdPtr
    ) internal pure returns (uint24 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint32 at `cdPtr` in calldata.
    function readUint32(
        CalldataPointer cdPtr
    ) internal pure returns (uint32 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint40 at `cdPtr` in calldata.
    function readUint40(
        CalldataPointer cdPtr
    ) internal pure returns (uint40 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint48 at `cdPtr` in calldata.
    function readUint48(
        CalldataPointer cdPtr
    ) internal pure returns (uint48 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint56 at `cdPtr` in calldata.
    function readUint56(
        CalldataPointer cdPtr
    ) internal pure returns (uint56 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint64 at `cdPtr` in calldata.
    function readUint64(
        CalldataPointer cdPtr
    ) internal pure returns (uint64 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint72 at `cdPtr` in calldata.
    function readUint72(
        CalldataPointer cdPtr
    ) internal pure returns (uint72 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint80 at `cdPtr` in calldata.
    function readUint80(
        CalldataPointer cdPtr
    ) internal pure returns (uint80 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint88 at `cdPtr` in calldata.
    function readUint88(
        CalldataPointer cdPtr
    ) internal pure returns (uint88 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint96 at `cdPtr` in calldata.
    function readUint96(
        CalldataPointer cdPtr
    ) internal pure returns (uint96 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint104 at `cdPtr` in calldata.
    function readUint104(
        CalldataPointer cdPtr
    ) internal pure returns (uint104 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint112 at `cdPtr` in calldata.
    function readUint112(
        CalldataPointer cdPtr
    ) internal pure returns (uint112 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint120 at `cdPtr` in calldata.
    function readUint120(
        CalldataPointer cdPtr
    ) internal pure returns (uint120 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint128 at `cdPtr` in calldata.
    function readUint128(
        CalldataPointer cdPtr
    ) internal pure returns (uint128 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint136 at `cdPtr` in calldata.
    function readUint136(
        CalldataPointer cdPtr
    ) internal pure returns (uint136 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint144 at `cdPtr` in calldata.
    function readUint144(
        CalldataPointer cdPtr
    ) internal pure returns (uint144 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint152 at `cdPtr` in calldata.
    function readUint152(
        CalldataPointer cdPtr
    ) internal pure returns (uint152 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint160 at `cdPtr` in calldata.
    function readUint160(
        CalldataPointer cdPtr
    ) internal pure returns (uint160 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint168 at `cdPtr` in calldata.
    function readUint168(
        CalldataPointer cdPtr
    ) internal pure returns (uint168 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint176 at `cdPtr` in calldata.
    function readUint176(
        CalldataPointer cdPtr
    ) internal pure returns (uint176 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint184 at `cdPtr` in calldata.
    function readUint184(
        CalldataPointer cdPtr
    ) internal pure returns (uint184 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint192 at `cdPtr` in calldata.
    function readUint192(
        CalldataPointer cdPtr
    ) internal pure returns (uint192 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint200 at `cdPtr` in calldata.
    function readUint200(
        CalldataPointer cdPtr
    ) internal pure returns (uint200 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint208 at `cdPtr` in calldata.
    function readUint208(
        CalldataPointer cdPtr
    ) internal pure returns (uint208 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint216 at `cdPtr` in calldata.
    function readUint216(
        CalldataPointer cdPtr
    ) internal pure returns (uint216 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint224 at `cdPtr` in calldata.
    function readUint224(
        CalldataPointer cdPtr
    ) internal pure returns (uint224 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint232 at `cdPtr` in calldata.
    function readUint232(
        CalldataPointer cdPtr
    ) internal pure returns (uint232 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint240 at `cdPtr` in calldata.
    function readUint240(
        CalldataPointer cdPtr
    ) internal pure returns (uint240 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint248 at `cdPtr` in calldata.
    function readUint248(
        CalldataPointer cdPtr
    ) internal pure returns (uint248 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the uint256 at `cdPtr` in calldata.
    function readUint256(
        CalldataPointer cdPtr
    ) internal pure returns (uint256 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int8 at `cdPtr` in calldata.
    function readInt8(
        CalldataPointer cdPtr
    ) internal pure returns (int8 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int16 at `cdPtr` in calldata.
    function readInt16(
        CalldataPointer cdPtr
    ) internal pure returns (int16 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int24 at `cdPtr` in calldata.
    function readInt24(
        CalldataPointer cdPtr
    ) internal pure returns (int24 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int32 at `cdPtr` in calldata.
    function readInt32(
        CalldataPointer cdPtr
    ) internal pure returns (int32 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int40 at `cdPtr` in calldata.
    function readInt40(
        CalldataPointer cdPtr
    ) internal pure returns (int40 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int48 at `cdPtr` in calldata.
    function readInt48(
        CalldataPointer cdPtr
    ) internal pure returns (int48 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int56 at `cdPtr` in calldata.
    function readInt56(
        CalldataPointer cdPtr
    ) internal pure returns (int56 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int64 at `cdPtr` in calldata.
    function readInt64(
        CalldataPointer cdPtr
    ) internal pure returns (int64 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int72 at `cdPtr` in calldata.
    function readInt72(
        CalldataPointer cdPtr
    ) internal pure returns (int72 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int80 at `cdPtr` in calldata.
    function readInt80(
        CalldataPointer cdPtr
    ) internal pure returns (int80 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int88 at `cdPtr` in calldata.
    function readInt88(
        CalldataPointer cdPtr
    ) internal pure returns (int88 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int96 at `cdPtr` in calldata.
    function readInt96(
        CalldataPointer cdPtr
    ) internal pure returns (int96 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int104 at `cdPtr` in calldata.
    function readInt104(
        CalldataPointer cdPtr
    ) internal pure returns (int104 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int112 at `cdPtr` in calldata.
    function readInt112(
        CalldataPointer cdPtr
    ) internal pure returns (int112 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int120 at `cdPtr` in calldata.
    function readInt120(
        CalldataPointer cdPtr
    ) internal pure returns (int120 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int128 at `cdPtr` in calldata.
    function readInt128(
        CalldataPointer cdPtr
    ) internal pure returns (int128 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int136 at `cdPtr` in calldata.
    function readInt136(
        CalldataPointer cdPtr
    ) internal pure returns (int136 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int144 at `cdPtr` in calldata.
    function readInt144(
        CalldataPointer cdPtr
    ) internal pure returns (int144 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int152 at `cdPtr` in calldata.
    function readInt152(
        CalldataPointer cdPtr
    ) internal pure returns (int152 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int160 at `cdPtr` in calldata.
    function readInt160(
        CalldataPointer cdPtr
    ) internal pure returns (int160 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int168 at `cdPtr` in calldata.
    function readInt168(
        CalldataPointer cdPtr
    ) internal pure returns (int168 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int176 at `cdPtr` in calldata.
    function readInt176(
        CalldataPointer cdPtr
    ) internal pure returns (int176 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int184 at `cdPtr` in calldata.
    function readInt184(
        CalldataPointer cdPtr
    ) internal pure returns (int184 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int192 at `cdPtr` in calldata.
    function readInt192(
        CalldataPointer cdPtr
    ) internal pure returns (int192 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int200 at `cdPtr` in calldata.
    function readInt200(
        CalldataPointer cdPtr
    ) internal pure returns (int200 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int208 at `cdPtr` in calldata.
    function readInt208(
        CalldataPointer cdPtr
    ) internal pure returns (int208 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int216 at `cdPtr` in calldata.
    function readInt216(
        CalldataPointer cdPtr
    ) internal pure returns (int216 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int224 at `cdPtr` in calldata.
    function readInt224(
        CalldataPointer cdPtr
    ) internal pure returns (int224 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int232 at `cdPtr` in calldata.
    function readInt232(
        CalldataPointer cdPtr
    ) internal pure returns (int232 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int240 at `cdPtr` in calldata.
    function readInt240(
        CalldataPointer cdPtr
    ) internal pure returns (int240 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int248 at `cdPtr` in calldata.
    function readInt248(
        CalldataPointer cdPtr
    ) internal pure returns (int248 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
    /// @dev Reads the int256 at `cdPtr` in calldata.
    function readInt256(
        CalldataPointer cdPtr
    ) internal pure returns (int256 value) {
        assembly {
            value := calldataload(cdPtr)
        }
    }
}
library ReturndataReaders {
    /// @dev Reads value at `rdPtr` & applies a mask to return only last 4 bytes
    function readMaskedUint256(
        ReturndataPointer rdPtr
    ) internal pure returns (uint256 value) {
        value = rdPtr.readUint256() & OffsetOrLengthMask;
    }
    /// @dev Reads the bool at `rdPtr` in returndata.
    function readBool(
        ReturndataPointer rdPtr
    ) internal pure returns (bool value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the address at `rdPtr` in returndata.
    function readAddress(
        ReturndataPointer rdPtr
    ) internal pure returns (address value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes1 at `rdPtr` in returndata.
    function readBytes1(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes1 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes2 at `rdPtr` in returndata.
    function readBytes2(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes2 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes3 at `rdPtr` in returndata.
    function readBytes3(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes3 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes4 at `rdPtr` in returndata.
    function readBytes4(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes4 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes5 at `rdPtr` in returndata.
    function readBytes5(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes5 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes6 at `rdPtr` in returndata.
    function readBytes6(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes6 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes7 at `rdPtr` in returndata.
    function readBytes7(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes7 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes8 at `rdPtr` in returndata.
    function readBytes8(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes8 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes9 at `rdPtr` in returndata.
    function readBytes9(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes9 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes10 at `rdPtr` in returndata.
    function readBytes10(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes10 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes11 at `rdPtr` in returndata.
    function readBytes11(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes11 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes12 at `rdPtr` in returndata.
    function readBytes12(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes12 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes13 at `rdPtr` in returndata.
    function readBytes13(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes13 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes14 at `rdPtr` in returndata.
    function readBytes14(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes14 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes15 at `rdPtr` in returndata.
    function readBytes15(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes15 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes16 at `rdPtr` in returndata.
    function readBytes16(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes16 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes17 at `rdPtr` in returndata.
    function readBytes17(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes17 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes18 at `rdPtr` in returndata.
    function readBytes18(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes18 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes19 at `rdPtr` in returndata.
    function readBytes19(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes19 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes20 at `rdPtr` in returndata.
    function readBytes20(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes20 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes21 at `rdPtr` in returndata.
    function readBytes21(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes21 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes22 at `rdPtr` in returndata.
    function readBytes22(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes22 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes23 at `rdPtr` in returndata.
    function readBytes23(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes23 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes24 at `rdPtr` in returndata.
    function readBytes24(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes24 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes25 at `rdPtr` in returndata.
    function readBytes25(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes25 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes26 at `rdPtr` in returndata.
    function readBytes26(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes26 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes27 at `rdPtr` in returndata.
    function readBytes27(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes27 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes28 at `rdPtr` in returndata.
    function readBytes28(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes28 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes29 at `rdPtr` in returndata.
    function readBytes29(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes29 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes30 at `rdPtr` in returndata.
    function readBytes30(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes30 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes31 at `rdPtr` in returndata.
    function readBytes31(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes31 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the bytes32 at `rdPtr` in returndata.
    function readBytes32(
        ReturndataPointer rdPtr
    ) internal pure returns (bytes32 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint8 at `rdPtr` in returndata.
    function readUint8(
        ReturndataPointer rdPtr
    ) internal pure returns (uint8 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint16 at `rdPtr` in returndata.
    function readUint16(
        ReturndataPointer rdPtr
    ) internal pure returns (uint16 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint24 at `rdPtr` in returndata.
    function readUint24(
        ReturndataPointer rdPtr
    ) internal pure returns (uint24 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint32 at `rdPtr` in returndata.
    function readUint32(
        ReturndataPointer rdPtr
    ) internal pure returns (uint32 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint40 at `rdPtr` in returndata.
    function readUint40(
        ReturndataPointer rdPtr
    ) internal pure returns (uint40 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint48 at `rdPtr` in returndata.
    function readUint48(
        ReturndataPointer rdPtr
    ) internal pure returns (uint48 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint56 at `rdPtr` in returndata.
    function readUint56(
        ReturndataPointer rdPtr
    ) internal pure returns (uint56 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint64 at `rdPtr` in returndata.
    function readUint64(
        ReturndataPointer rdPtr
    ) internal pure returns (uint64 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint72 at `rdPtr` in returndata.
    function readUint72(
        ReturndataPointer rdPtr
    ) internal pure returns (uint72 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint80 at `rdPtr` in returndata.
    function readUint80(
        ReturndataPointer rdPtr
    ) internal pure returns (uint80 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint88 at `rdPtr` in returndata.
    function readUint88(
        ReturndataPointer rdPtr
    ) internal pure returns (uint88 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint96 at `rdPtr` in returndata.
    function readUint96(
        ReturndataPointer rdPtr
    ) internal pure returns (uint96 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint104 at `rdPtr` in returndata.
    function readUint104(
        ReturndataPointer rdPtr
    ) internal pure returns (uint104 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint112 at `rdPtr` in returndata.
    function readUint112(
        ReturndataPointer rdPtr
    ) internal pure returns (uint112 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint120 at `rdPtr` in returndata.
    function readUint120(
        ReturndataPointer rdPtr
    ) internal pure returns (uint120 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint128 at `rdPtr` in returndata.
    function readUint128(
        ReturndataPointer rdPtr
    ) internal pure returns (uint128 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint136 at `rdPtr` in returndata.
    function readUint136(
        ReturndataPointer rdPtr
    ) internal pure returns (uint136 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint144 at `rdPtr` in returndata.
    function readUint144(
        ReturndataPointer rdPtr
    ) internal pure returns (uint144 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint152 at `rdPtr` in returndata.
    function readUint152(
        ReturndataPointer rdPtr
    ) internal pure returns (uint152 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint160 at `rdPtr` in returndata.
    function readUint160(
        ReturndataPointer rdPtr
    ) internal pure returns (uint160 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint168 at `rdPtr` in returndata.
    function readUint168(
        ReturndataPointer rdPtr
    ) internal pure returns (uint168 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint176 at `rdPtr` in returndata.
    function readUint176(
        ReturndataPointer rdPtr
    ) internal pure returns (uint176 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint184 at `rdPtr` in returndata.
    function readUint184(
        ReturndataPointer rdPtr
    ) internal pure returns (uint184 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint192 at `rdPtr` in returndata.
    function readUint192(
        ReturndataPointer rdPtr
    ) internal pure returns (uint192 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint200 at `rdPtr` in returndata.
    function readUint200(
        ReturndataPointer rdPtr
    ) internal pure returns (uint200 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint208 at `rdPtr` in returndata.
    function readUint208(
        ReturndataPointer rdPtr
    ) internal pure returns (uint208 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint216 at `rdPtr` in returndata.
    function readUint216(
        ReturndataPointer rdPtr
    ) internal pure returns (uint216 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint224 at `rdPtr` in returndata.
    function readUint224(
        ReturndataPointer rdPtr
    ) internal pure returns (uint224 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint232 at `rdPtr` in returndata.
    function readUint232(
        ReturndataPointer rdPtr
    ) internal pure returns (uint232 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint240 at `rdPtr` in returndata.
    function readUint240(
        ReturndataPointer rdPtr
    ) internal pure returns (uint240 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint248 at `rdPtr` in returndata.
    function readUint248(
        ReturndataPointer rdPtr
    ) internal pure returns (uint248 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the uint256 at `rdPtr` in returndata.
    function readUint256(
        ReturndataPointer rdPtr
    ) internal pure returns (uint256 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int8 at `rdPtr` in returndata.
    function readInt8(
        ReturndataPointer rdPtr
    ) internal pure returns (int8 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int16 at `rdPtr` in returndata.
    function readInt16(
        ReturndataPointer rdPtr
    ) internal pure returns (int16 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int24 at `rdPtr` in returndata.
    function readInt24(
        ReturndataPointer rdPtr
    ) internal pure returns (int24 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int32 at `rdPtr` in returndata.
    function readInt32(
        ReturndataPointer rdPtr
    ) internal pure returns (int32 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int40 at `rdPtr` in returndata.
    function readInt40(
        ReturndataPointer rdPtr
    ) internal pure returns (int40 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int48 at `rdPtr` in returndata.
    function readInt48(
        ReturndataPointer rdPtr
    ) internal pure returns (int48 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int56 at `rdPtr` in returndata.
    function readInt56(
        ReturndataPointer rdPtr
    ) internal pure returns (int56 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int64 at `rdPtr` in returndata.
    function readInt64(
        ReturndataPointer rdPtr
    ) internal pure returns (int64 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int72 at `rdPtr` in returndata.
    function readInt72(
        ReturndataPointer rdPtr
    ) internal pure returns (int72 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int80 at `rdPtr` in returndata.
    function readInt80(
        ReturndataPointer rdPtr
    ) internal pure returns (int80 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int88 at `rdPtr` in returndata.
    function readInt88(
        ReturndataPointer rdPtr
    ) internal pure returns (int88 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int96 at `rdPtr` in returndata.
    function readInt96(
        ReturndataPointer rdPtr
    ) internal pure returns (int96 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int104 at `rdPtr` in returndata.
    function readInt104(
        ReturndataPointer rdPtr
    ) internal pure returns (int104 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int112 at `rdPtr` in returndata.
    function readInt112(
        ReturndataPointer rdPtr
    ) internal pure returns (int112 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int120 at `rdPtr` in returndata.
    function readInt120(
        ReturndataPointer rdPtr
    ) internal pure returns (int120 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int128 at `rdPtr` in returndata.
    function readInt128(
        ReturndataPointer rdPtr
    ) internal pure returns (int128 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int136 at `rdPtr` in returndata.
    function readInt136(
        ReturndataPointer rdPtr
    ) internal pure returns (int136 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int144 at `rdPtr` in returndata.
    function readInt144(
        ReturndataPointer rdPtr
    ) internal pure returns (int144 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int152 at `rdPtr` in returndata.
    function readInt152(
        ReturndataPointer rdPtr
    ) internal pure returns (int152 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int160 at `rdPtr` in returndata.
    function readInt160(
        ReturndataPointer rdPtr
    ) internal pure returns (int160 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int168 at `rdPtr` in returndata.
    function readInt168(
        ReturndataPointer rdPtr
    ) internal pure returns (int168 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int176 at `rdPtr` in returndata.
    function readInt176(
        ReturndataPointer rdPtr
    ) internal pure returns (int176 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int184 at `rdPtr` in returndata.
    function readInt184(
        ReturndataPointer rdPtr
    ) internal pure returns (int184 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int192 at `rdPtr` in returndata.
    function readInt192(
        ReturndataPointer rdPtr
    ) internal pure returns (int192 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int200 at `rdPtr` in returndata.
    function readInt200(
        ReturndataPointer rdPtr
    ) internal pure returns (int200 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int208 at `rdPtr` in returndata.
    function readInt208(
        ReturndataPointer rdPtr
    ) internal pure returns (int208 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int216 at `rdPtr` in returndata.
    function readInt216(
        ReturndataPointer rdPtr
    ) internal pure returns (int216 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int224 at `rdPtr` in returndata.
    function readInt224(
        ReturndataPointer rdPtr
    ) internal pure returns (int224 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int232 at `rdPtr` in returndata.
    function readInt232(
        ReturndataPointer rdPtr
    ) internal pure returns (int232 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int240 at `rdPtr` in returndata.
    function readInt240(
        ReturndataPointer rdPtr
    ) internal pure returns (int240 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int248 at `rdPtr` in returndata.
    function readInt248(
        ReturndataPointer rdPtr
    ) internal pure returns (int248 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
    /// @dev Reads the int256 at `rdPtr` in returndata.
    function readInt256(
        ReturndataPointer rdPtr
    ) internal pure returns (int256 value) {
        assembly {
            returndatacopy(0, rdPtr, _OneWord)
            value := mload(0)
        }
    }
}
library MemoryReaders {
    /// @dev Reads the memory pointer at `mPtr` in memory.
    function readMemoryPointer(
        MemoryPointer mPtr
    ) internal pure returns (MemoryPointer value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads value at `mPtr` & applies a mask to return only last 4 bytes
    function readMaskedUint256(
        MemoryPointer mPtr
    ) internal pure returns (uint256 value) {
        value = mPtr.readUint256() & OffsetOrLengthMask;
    }
    /// @dev Reads the bool at `mPtr` in memory.
    function readBool(MemoryPointer mPtr) internal pure returns (bool value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the address at `mPtr` in memory.
    function readAddress(
        MemoryPointer mPtr
    ) internal pure returns (address value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes1 at `mPtr` in memory.
    function readBytes1(
        MemoryPointer mPtr
    ) internal pure returns (bytes1 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes2 at `mPtr` in memory.
    function readBytes2(
        MemoryPointer mPtr
    ) internal pure returns (bytes2 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes3 at `mPtr` in memory.
    function readBytes3(
        MemoryPointer mPtr
    ) internal pure returns (bytes3 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes4 at `mPtr` in memory.
    function readBytes4(
        MemoryPointer mPtr
    ) internal pure returns (bytes4 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes5 at `mPtr` in memory.
    function readBytes5(
        MemoryPointer mPtr
    ) internal pure returns (bytes5 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes6 at `mPtr` in memory.
    function readBytes6(
        MemoryPointer mPtr
    ) internal pure returns (bytes6 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes7 at `mPtr` in memory.
    function readBytes7(
        MemoryPointer mPtr
    ) internal pure returns (bytes7 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes8 at `mPtr` in memory.
    function readBytes8(
        MemoryPointer mPtr
    ) internal pure returns (bytes8 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes9 at `mPtr` in memory.
    function readBytes9(
        MemoryPointer mPtr
    ) internal pure returns (bytes9 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes10 at `mPtr` in memory.
    function readBytes10(
        MemoryPointer mPtr
    ) internal pure returns (bytes10 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes11 at `mPtr` in memory.
    function readBytes11(
        MemoryPointer mPtr
    ) internal pure returns (bytes11 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes12 at `mPtr` in memory.
    function readBytes12(
        MemoryPointer mPtr
    ) internal pure returns (bytes12 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes13 at `mPtr` in memory.
    function readBytes13(
        MemoryPointer mPtr
    ) internal pure returns (bytes13 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes14 at `mPtr` in memory.
    function readBytes14(
        MemoryPointer mPtr
    ) internal pure returns (bytes14 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes15 at `mPtr` in memory.
    function readBytes15(
        MemoryPointer mPtr
    ) internal pure returns (bytes15 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes16 at `mPtr` in memory.
    function readBytes16(
        MemoryPointer mPtr
    ) internal pure returns (bytes16 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes17 at `mPtr` in memory.
    function readBytes17(
        MemoryPointer mPtr
    ) internal pure returns (bytes17 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes18 at `mPtr` in memory.
    function readBytes18(
        MemoryPointer mPtr
    ) internal pure returns (bytes18 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes19 at `mPtr` in memory.
    function readBytes19(
        MemoryPointer mPtr
    ) internal pure returns (bytes19 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes20 at `mPtr` in memory.
    function readBytes20(
        MemoryPointer mPtr
    ) internal pure returns (bytes20 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes21 at `mPtr` in memory.
    function readBytes21(
        MemoryPointer mPtr
    ) internal pure returns (bytes21 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes22 at `mPtr` in memory.
    function readBytes22(
        MemoryPointer mPtr
    ) internal pure returns (bytes22 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes23 at `mPtr` in memory.
    function readBytes23(
        MemoryPointer mPtr
    ) internal pure returns (bytes23 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes24 at `mPtr` in memory.
    function readBytes24(
        MemoryPointer mPtr
    ) internal pure returns (bytes24 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes25 at `mPtr` in memory.
    function readBytes25(
        MemoryPointer mPtr
    ) internal pure returns (bytes25 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes26 at `mPtr` in memory.
    function readBytes26(
        MemoryPointer mPtr
    ) internal pure returns (bytes26 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes27 at `mPtr` in memory.
    function readBytes27(
        MemoryPointer mPtr
    ) internal pure returns (bytes27 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes28 at `mPtr` in memory.
    function readBytes28(
        MemoryPointer mPtr
    ) internal pure returns (bytes28 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes29 at `mPtr` in memory.
    function readBytes29(
        MemoryPointer mPtr
    ) internal pure returns (bytes29 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes30 at `mPtr` in memory.
    function readBytes30(
        MemoryPointer mPtr
    ) internal pure returns (bytes30 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes31 at `mPtr` in memory.
    function readBytes31(
        MemoryPointer mPtr
    ) internal pure returns (bytes31 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the bytes32 at `mPtr` in memory.
    function readBytes32(
        MemoryPointer mPtr
    ) internal pure returns (bytes32 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint8 at `mPtr` in memory.
    function readUint8(MemoryPointer mPtr) internal pure returns (uint8 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint16 at `mPtr` in memory.
    function readUint16(
        MemoryPointer mPtr
    ) internal pure returns (uint16 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint24 at `mPtr` in memory.
    function readUint24(
        MemoryPointer mPtr
    ) internal pure returns (uint24 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint32 at `mPtr` in memory.
    function readUint32(
        MemoryPointer mPtr
    ) internal pure returns (uint32 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint40 at `mPtr` in memory.
    function readUint40(
        MemoryPointer mPtr
    ) internal pure returns (uint40 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint48 at `mPtr` in memory.
    function readUint48(
        MemoryPointer mPtr
    ) internal pure returns (uint48 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint56 at `mPtr` in memory.
    function readUint56(
        MemoryPointer mPtr
    ) internal pure returns (uint56 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint64 at `mPtr` in memory.
    function readUint64(
        MemoryPointer mPtr
    ) internal pure returns (uint64 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint72 at `mPtr` in memory.
    function readUint72(
        MemoryPointer mPtr
    ) internal pure returns (uint72 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint80 at `mPtr` in memory.
    function readUint80(
        MemoryPointer mPtr
    ) internal pure returns (uint80 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint88 at `mPtr` in memory.
    function readUint88(
        MemoryPointer mPtr
    ) internal pure returns (uint88 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint96 at `mPtr` in memory.
    function readUint96(
        MemoryPointer mPtr
    ) internal pure returns (uint96 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint104 at `mPtr` in memory.
    function readUint104(
        MemoryPointer mPtr
    ) internal pure returns (uint104 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint112 at `mPtr` in memory.
    function readUint112(
        MemoryPointer mPtr
    ) internal pure returns (uint112 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint120 at `mPtr` in memory.
    function readUint120(
        MemoryPointer mPtr
    ) internal pure returns (uint120 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint128 at `mPtr` in memory.
    function readUint128(
        MemoryPointer mPtr
    ) internal pure returns (uint128 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint136 at `mPtr` in memory.
    function readUint136(
        MemoryPointer mPtr
    ) internal pure returns (uint136 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint144 at `mPtr` in memory.
    function readUint144(
        MemoryPointer mPtr
    ) internal pure returns (uint144 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint152 at `mPtr` in memory.
    function readUint152(
        MemoryPointer mPtr
    ) internal pure returns (uint152 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint160 at `mPtr` in memory.
    function readUint160(
        MemoryPointer mPtr
    ) internal pure returns (uint160 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint168 at `mPtr` in memory.
    function readUint168(
        MemoryPointer mPtr
    ) internal pure returns (uint168 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint176 at `mPtr` in memory.
    function readUint176(
        MemoryPointer mPtr
    ) internal pure returns (uint176 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint184 at `mPtr` in memory.
    function readUint184(
        MemoryPointer mPtr
    ) internal pure returns (uint184 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint192 at `mPtr` in memory.
    function readUint192(
        MemoryPointer mPtr
    ) internal pure returns (uint192 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint200 at `mPtr` in memory.
    function readUint200(
        MemoryPointer mPtr
    ) internal pure returns (uint200 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint208 at `mPtr` in memory.
    function readUint208(
        MemoryPointer mPtr
    ) internal pure returns (uint208 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint216 at `mPtr` in memory.
    function readUint216(
        MemoryPointer mPtr
    ) internal pure returns (uint216 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint224 at `mPtr` in memory.
    function readUint224(
        MemoryPointer mPtr
    ) internal pure returns (uint224 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint232 at `mPtr` in memory.
    function readUint232(
        MemoryPointer mPtr
    ) internal pure returns (uint232 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint240 at `mPtr` in memory.
    function readUint240(
        MemoryPointer mPtr
    ) internal pure returns (uint240 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint248 at `mPtr` in memory.
    function readUint248(
        MemoryPointer mPtr
    ) internal pure returns (uint248 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the uint256 at `mPtr` in memory.
    function readUint256(
        MemoryPointer mPtr
    ) internal pure returns (uint256 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int8 at `mPtr` in memory.
    function readInt8(MemoryPointer mPtr) internal pure returns (int8 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int16 at `mPtr` in memory.
    function readInt16(MemoryPointer mPtr) internal pure returns (int16 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int24 at `mPtr` in memory.
    function readInt24(MemoryPointer mPtr) internal pure returns (int24 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int32 at `mPtr` in memory.
    function readInt32(MemoryPointer mPtr) internal pure returns (int32 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int40 at `mPtr` in memory.
    function readInt40(MemoryPointer mPtr) internal pure returns (int40 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int48 at `mPtr` in memory.
    function readInt48(MemoryPointer mPtr) internal pure returns (int48 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int56 at `mPtr` in memory.
    function readInt56(MemoryPointer mPtr) internal pure returns (int56 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int64 at `mPtr` in memory.
    function readInt64(MemoryPointer mPtr) internal pure returns (int64 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int72 at `mPtr` in memory.
    function readInt72(MemoryPointer mPtr) internal pure returns (int72 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int80 at `mPtr` in memory.
    function readInt80(MemoryPointer mPtr) internal pure returns (int80 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int88 at `mPtr` in memory.
    function readInt88(MemoryPointer mPtr) internal pure returns (int88 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int96 at `mPtr` in memory.
    function readInt96(MemoryPointer mPtr) internal pure returns (int96 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int104 at `mPtr` in memory.
    function readInt104(
        MemoryPointer mPtr
    ) internal pure returns (int104 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int112 at `mPtr` in memory.
    function readInt112(
        MemoryPointer mPtr
    ) internal pure returns (int112 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int120 at `mPtr` in memory.
    function readInt120(
        MemoryPointer mPtr
    ) internal pure returns (int120 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int128 at `mPtr` in memory.
    function readInt128(
        MemoryPointer mPtr
    ) internal pure returns (int128 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int136 at `mPtr` in memory.
    function readInt136(
        MemoryPointer mPtr
    ) internal pure returns (int136 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int144 at `mPtr` in memory.
    function readInt144(
        MemoryPointer mPtr
    ) internal pure returns (int144 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int152 at `mPtr` in memory.
    function readInt152(
        MemoryPointer mPtr
    ) internal pure returns (int152 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int160 at `mPtr` in memory.
    function readInt160(
        MemoryPointer mPtr
    ) internal pure returns (int160 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int168 at `mPtr` in memory.
    function readInt168(
        MemoryPointer mPtr
    ) internal pure returns (int168 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int176 at `mPtr` in memory.
    function readInt176(
        MemoryPointer mPtr
    ) internal pure returns (int176 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int184 at `mPtr` in memory.
    function readInt184(
        MemoryPointer mPtr
    ) internal pure returns (int184 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int192 at `mPtr` in memory.
    function readInt192(
        MemoryPointer mPtr
    ) internal pure returns (int192 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int200 at `mPtr` in memory.
    function readInt200(
        MemoryPointer mPtr
    ) internal pure returns (int200 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int208 at `mPtr` in memory.
    function readInt208(
        MemoryPointer mPtr
    ) internal pure returns (int208 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int216 at `mPtr` in memory.
    function readInt216(
        MemoryPointer mPtr
    ) internal pure returns (int216 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int224 at `mPtr` in memory.
    function readInt224(
        MemoryPointer mPtr
    ) internal pure returns (int224 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int232 at `mPtr` in memory.
    function readInt232(
        MemoryPointer mPtr
    ) internal pure returns (int232 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int240 at `mPtr` in memory.
    function readInt240(
        MemoryPointer mPtr
    ) internal pure returns (int240 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int248 at `mPtr` in memory.
    function readInt248(
        MemoryPointer mPtr
    ) internal pure returns (int248 value) {
        assembly {
            value := mload(mPtr)
        }
    }
    /// @dev Reads the int256 at `mPtr` in memory.
    function readInt256(
        MemoryPointer mPtr
    ) internal pure returns (int256 value) {
        assembly {
            value := mload(mPtr)
        }
    }
}
library MemoryWriters {
    /// @dev Writes `valuePtr` to memory at `mPtr`.
    function write(MemoryPointer mPtr, MemoryPointer valuePtr) internal pure {
        assembly {
            mstore(mPtr, valuePtr)
        }
    }
    /// @dev Writes a boolean `value` to `mPtr` in memory.
    function write(MemoryPointer mPtr, bool value) internal pure {
        assembly {
            mstore(mPtr, value)
        }
    }
    /// @dev Writes an address `value` to `mPtr` in memory.
    function write(MemoryPointer mPtr, address value) internal pure {
        assembly {
            mstore(mPtr, value)
        }
    }
    /// @dev Writes a bytes32 `value` to `mPtr` in memory.
    /// Separate name to disambiguate literal write parameters.
    function writeBytes32(MemoryPointer mPtr, bytes32 value) internal pure {
        assembly {
            mstore(mPtr, value)
        }
    }
    /// @dev Writes a uint256 `value` to `mPtr` in memory.
    function write(MemoryPointer mPtr, uint256 value) internal pure {
        assembly {
            mstore(mPtr, value)
        }
    }
    /// @dev Writes an int256 `value` to `mPtr` in memory.
    /// Separate name to disambiguate literal write parameters.
    function writeInt(MemoryPointer mPtr, int256 value) internal pure {
        assembly {
            mstore(mPtr, value)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/*
 * -------------------------- Disambiguation & Other Notes ---------------------
 *    - The term "head" is used as it is in the documentation for ABI encoding,
 *      but only in reference to dynamic types, i.e. it always refers to the
 *      offset or pointer to the body of a dynamic type. In calldata, the head
 *      is always an offset (relative to the parent object), while in memory,
 *      the head is always the pointer to the body. More information found here:
 *      https://docs.soliditylang.org/en/v0.8.17/abi-spec.html#argument-encoding
 *        - Note that the length of an array is separate from and precedes the
 *          head of the array.
 *
 *    - The term "body" is used in place of the term "head" used in the ABI
 *      documentation. It refers to the start of the data for a dynamic type,
 *      e.g. the first word of a struct or the first word of the first element
 *      in an array.
 *
 *    - The term "pointer" is used to describe the absolute position of a value
 *      and never an offset relative to another value.
 *        - The suffix "_ptr" refers to a memory pointer.
 *        - The suffix "_cdPtr" refers to a calldata pointer.
 *
 *    - The term "offset" is used to describe the position of a value relative
 *      to some parent value. For example, OrderParameters_conduit_offset is the
 *      offset to the "conduit" value in the OrderParameters struct relative to
 *      the start of the body.
 *        - Note: Offsets are used to derive pointers.
 *
 *    - Some structs have pointers defined for all of their fields in this file.
 *      Lines which are commented out are fields that are not used in the
 *      codebase but have been left in for readability.
 */
// Declare constants for name, version, and reentrancy sentinel values.
// Name is right padded, so it touches the length which is left padded. This
// enables writing both values at once. Length goes at byte 95 in memory, and
// name fills bytes 96-109, so both values can be written left-padded to 77.
uint256 constant NameLengthPtr = 0x4D;
uint256 constant NameWithLength = 0x0d436F6E73696465726174696F6E;
uint256 constant information_version_offset = 0;
uint256 constant information_version_cd_offset = 0x60;
uint256 constant information_domainSeparator_offset = 0x20;
uint256 constant information_conduitController_offset = 0x40;
uint256 constant information_versionLengthPtr = 0x63;
uint256 constant information_versionWithLength = 0x03312e36; // 1.6
uint256 constant information_length = 0xa0;
// uint256(uint32(bytes4(keccak256("_REENTRANCY_GUARD_SLOT"))))
uint256 constant _REENTRANCY_GUARD_SLOT = 0x929eee14;
/*
 *
 * --------------------------------------------------------------------------+
 * Opcode      | Mnemonic         | Stack               | Memory             |
 * --------------------------------------------------------------------------|
 * 60 0x02     | PUSH1 0x02       | 0x02                |                    |
 * 60 0x1e     | PUSH1 0x1e       | 0x1e 0x02           |                    |
 * 61 0x3d5c   | PUSH2 0x3d5c     | 0x3d5c 0x1e 0x02    |                    |
 * 3d          | RETURNDATASIZE   | 0 0x3d5c 0x1e 0x02  |                    |
 *                                                                           |
 * ::: store deployed bytecode in memory: (3d) RETURNDATASIZE (5c) TLOAD ::: |
 * 52          | MSTORE           | 0x1e 0x02           | [0..0x20): 0x3d5c  |
 * f3          | RETURN           |                     | [0..0x20): 0x3d5c  |
 * --------------------------------------------------------------------------+
 */
uint256 constant _TLOAD_TEST_PAYLOAD = 0x6002_601e_613d5c_3d_52_f3;
uint256 constant _TLOAD_TEST_PAYLOAD_LENGTH = 0x0a;
uint256 constant _TLOAD_TEST_PAYLOAD_OFFSET = 0x16;
uint256 constant _NOT_ENTERED_TSTORE = 0;
uint256 constant _ENTERED_TSTORE = 1;
uint256 constant _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_TSTORE = 2;
uint256 constant _TSTORE_ENABLED_SSTORE = 0;
uint256 constant _NOT_ENTERED_SSTORE = 1;
uint256 constant _ENTERED_SSTORE = 2;
uint256 constant _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_SSTORE = 3;
uint256 constant Offset_fulfillAdvancedOrder_criteriaResolvers = 0x20;
uint256 constant Offset_fulfillAvailableOrders_offerFulfillments = 0x20;
uint256 constant Offset_fulfillAvailableOrders_considerationFulfillments = 0x40;
uint256 constant Offset_fulfillAvailableAdvancedOrders_criteriaResolvers = 0x20;
uint256 constant Offset_fulfillAvailableAdvancedOrders_offerFulfillments = 0x40;
uint256 constant Offset_fulfillAvailableAdvancedOrders_cnsdrationFlflmnts =
    (0x60);
uint256 constant Offset_matchOrders_fulfillments = 0x20;
uint256 constant Offset_matchAdvancedOrders_criteriaResolvers = 0x20;
uint256 constant Offset_matchAdvancedOrders_fulfillments = 0x40;
// Common Offsets
// Offsets for identically positioned fields shared by:
// OfferItem, ConsiderationItem, SpentItem, ReceivedItem
uint256 constant Selector_length = 0x4;
uint256 constant Common_token_offset = 0x20;
uint256 constant Common_identifier_offset = 0x40;
uint256 constant Common_amount_offset = 0x60;
uint256 constant Common_endAmount_offset = 0x80;
uint256 constant SpentItem_size = 0x80;
uint256 constant SpentItem_size_shift = 0x7;
uint256 constant OfferItem_size = 0xa0;
uint256 constant OfferItem_size_with_head_pointer = 0xc0;
uint256 constant ReceivedItem_size_excluding_recipient = 0x80;
uint256 constant ReceivedItem_size = 0xa0;
uint256 constant ReceivedItem_amount_offset = 0x60;
uint256 constant ReceivedItem_recipient_offset = 0x80;
uint256 constant ReceivedItem_CommonParams_size = 0x60;
uint256 constant ConsiderationItem_size = 0xc0;
uint256 constant ConsiderationItem_size_with_head_pointer = 0xe0;
uint256 constant ConsiderationItem_recipient_offset = 0xa0;
// Store the same constant in an abbreviated format for a line length fix.
uint256 constant ConsiderItem_recipient_offset = 0xa0;
uint256 constant Execution_offerer_offset = 0x20;
uint256 constant Execution_conduit_offset = 0x40;
// uint256 constant OrderParameters_offerer_offset = 0x00;
uint256 constant OrderParameters_zone_offset = 0x20;
uint256 constant OrderParameters_offer_head_offset = 0x40;
uint256 constant OrderParameters_consideration_head_offset = 0x60;
// uint256 constant OrderParameters_orderType_offset = 0x80;
uint256 constant OrderParameters_startTime_offset = 0xa0;
uint256 constant OrderParameters_endTime_offset = 0xc0;
uint256 constant OrderParameters_zoneHash_offset = 0xe0;
uint256 constant OrderParameters_salt_offset = 0x100;
uint256 constant OrderParameters_conduit_offset = 0x120;
uint256 constant OrderParameters_counter_offset = 0x140;
uint256 constant Fulfillment_itemIndex_offset = 0x20;
uint256 constant AdvancedOrder_head_size = 0xa0;
uint256 constant AdvancedOrder_numerator_offset = 0x20;
uint256 constant AdvancedOrder_denominator_offset = 0x40;
uint256 constant AdvancedOrder_signature_offset = 0x60;
uint256 constant AdvancedOrder_extraData_offset = 0x80;
uint256 constant OrderStatus_ValidatedAndNotCancelled = 1;
uint256 constant OrderStatus_filledNumerator_offset = 0x10;
uint256 constant OrderStatus_filledDenominator_offset = 0x88;
uint256 constant OrderStatus_ValidatedAndNotCancelledAndFullyFilled = (
    0x0000000000000000000000000000010000000000000000000000000000010001
);
uint256 constant ThirtyOneBytes = 0x1f;
uint256 constant OneWord = 0x20;
uint256 constant TwoWords = 0x40;
uint256 constant ThreeWords = 0x60;
uint256 constant FourWords = 0x80;
uint256 constant FiveWords = 0xa0;
uint256 constant OneWordShift = 0x5;
uint256 constant TwoWordsShift = 0x6;
uint256 constant SixtyThreeBytes = 0x3f;
uint256 constant OnlyFullWordMask = 0xffffffe0;
uint256 constant FreeMemoryPointerSlot = 0x40;
uint256 constant ZeroSlot = 0x60;
uint256 constant DefaultFreeMemoryPointer = 0x80;
uint256 constant Slot0x80 = 0x80;
uint256 constant Slot0xA0 = 0xa0;
uint256 constant BasicOrder_common_params_size = 0xa0;
uint256 constant BasicOrder_considerationHashesArray_ptr = 0x160;
uint256 constant BasicOrder_receivedItemByteMap =
    (0x0000010102030000000000000000000000000000000000000000000000000000);
uint256 constant BasicOrder_offeredItemByteMap =
    (0x0203020301010000000000000000000000000000000000000000000000000000);
uint256 constant BasicOrder_consideration_offset_from_offer = 0xa0;
bytes32 constant OrdersMatchedTopic0 =
    (0x4b9f2d36e1b4c93de62cc077b00b1a91d84b6c31b4a14e012718dcca230689e7);
uint256 constant EIP712_Order_size = 0x180;
uint256 constant EIP712_OfferItem_size = 0xc0;
uint256 constant EIP712_ConsiderationItem_size = 0xe0;
uint256 constant AdditionalRecipient_size = 0x40;
uint256 constant AdditionalRecipient_size_shift = 0x6;
uint256 constant EIP712_DomainSeparator_offset = 0x02;
uint256 constant EIP712_OrderHash_offset = 0x22;
uint256 constant EIP712_DigestPayload_size = 0x42;
uint256 constant EIP712_domainData_nameHash_offset = 0x20;
uint256 constant EIP712_domainData_versionHash_offset = 0x40;
uint256 constant EIP712_domainData_chainId_offset = 0x60;
uint256 constant EIP712_domainData_verifyingContract_offset = 0x80;
uint256 constant EIP712_domainData_size = 0xa0;
// Minimum BulkOrder proof size: 64 bytes for signature + 3 for key + 32 for 1
// sibling. Maximum BulkOrder proof size: 65 bytes for signature + 3 for key +
// 768 for 24 siblings.
uint256 constant BulkOrderProof_minSize = 0x63;
uint256 constant BulkOrderProof_rangeSize = 0x2e2;
uint256 constant BulkOrderProof_lengthAdjustmentBeforeMask = 0x1d;
uint256 constant BulkOrderProof_lengthRangeAfterMask = 0x2;
uint256 constant BulkOrderProof_keyShift = 0xe8;
uint256 constant BulkOrderProof_keySize = 0x3;
uint256 constant BulkOrder_Typehash_Height_One =
    (0x3ca2711d29384747a8f61d60aad3c450405f7aaff5613541dee28df2d6986d32);
uint256 constant BulkOrder_Typehash_Height_Two =
    (0xbf8e29b89f29ed9b529c154a63038ffca562f8d7cd1e2545dda53a1b582dde30);
uint256 constant BulkOrder_Typehash_Height_Three =
    (0x53c6f6856e13104584dd0797ca2b2779202dc2597c6066a42e0d8fe990b0024d);
uint256 constant BulkOrder_Typehash_Height_Four =
    (0xa02eb7ff164c884e5e2c336dc85f81c6a93329d8e9adf214b32729b894de2af1);
uint256 constant BulkOrder_Typehash_Height_Five =
    (0x39c9d33c18e050dda0aeb9a8086fb16fc12d5d64536780e1da7405a800b0b9f6);
uint256 constant BulkOrder_Typehash_Height_Six =
    (0x1c19f71958cdd8f081b4c31f7caf5c010b29d12950be2fa1c95070dc47e30b55);
uint256 constant BulkOrder_Typehash_Height_Seven =
    (0xca74fab2fece9a1d58234a274220ad05ca096a92ef6a1ca1750b9d90c948955c);
uint256 constant BulkOrder_Typehash_Height_Eight =
    (0x7ff98d9d4e55d876c5cfac10b43c04039522f3ddfb0ea9bfe70c68cfb5c7cc14);
uint256 constant BulkOrder_Typehash_Height_Nine =
    (0xbed7be92d41c56f9e59ac7a6272185299b815ddfabc3f25deb51fe55fe2f9e8a);
uint256 constant BulkOrder_Typehash_Height_Ten =
    (0xd1d97d1ef5eaa37a4ee5fbf234e6f6d64eb511eb562221cd7edfbdde0848da05);
uint256 constant BulkOrder_Typehash_Height_Eleven =
    (0x896c3f349c4da741c19b37fec49ed2e44d738e775a21d9c9860a69d67a3dae53);
uint256 constant BulkOrder_Typehash_Height_Twelve =
    (0xbb98d87cc12922b83759626c5f07d72266da9702d19ffad6a514c73a89002f5f);
uint256 constant BulkOrder_Typehash_Height_Thirteen =
    (0xe6ae19322608dd1f8a8d56aab48ed9c28be489b689f4b6c91268563efc85f20e);
uint256 constant BulkOrder_Typehash_Height_Fourteen =
    (0x6b5b04cbae4fcb1a9d78e7b2dfc51a36933d023cf6e347e03d517b472a852590);
uint256 constant BulkOrder_Typehash_Height_Fifteen =
    (0xd1eb68309202b7106b891e109739dbbd334a1817fe5d6202c939e75cf5e35ca9);
uint256 constant BulkOrder_Typehash_Height_Sixteen =
    (0x1da3eed3ecef6ebaa6e5023c057ec2c75150693fd0dac5c90f4a142f9879fde8);
uint256 constant BulkOrder_Typehash_Height_Seventeen =
    (0xeee9a1392aa395c7002308119a58f2582777a75e54e0c1d5d5437bd2e8bf6222);
uint256 constant BulkOrder_Typehash_Height_Eighteen =
    (0xc3939feff011e53ab8c35ca3370aad54c5df1fc2938cd62543174fa6e7d85877);
uint256 constant BulkOrder_Typehash_Height_Nineteen =
    (0x0efca7572ac20f5ae84db0e2940674f7eca0a4726fa1060ffc2d18cef54b203d);
uint256 constant BulkOrder_Typehash_Height_Twenty =
    (0x5a4f867d3d458dabecad65f6201ceeaba0096df2d0c491cc32e6ea4e64350017);
uint256 constant BulkOrder_Typehash_Height_TwentyOne =
    (0x80987079d291feebf21c2230e69add0f283cee0b8be492ca8050b4185a2ff719);
uint256 constant BulkOrder_Typehash_Height_TwentyTwo =
    (0x3bd8cff538aba49a9c374c806d277181e9651624b3e31111bc0624574f8bca1d);
uint256 constant BulkOrder_Typehash_Height_TwentyThree =
    (0x5d6a3f098a0bc373f808c619b1bb4028208721b3c4f8d6bc8a874d659814eb76);
uint256 constant BulkOrder_Typehash_Height_TwentyFour =
    (0x1d51df90cba8de7637ca3e8fe1e3511d1dc2f23487d05dbdecb781860c21ac1c);
uint256 constant receivedItemsHash_ptr = 0x60;
/*
 *  Memory layout in _prepareBasicFulfillmentFromCalldata of
 *  data for OrderFulfilled
 *
 *   event OrderFulfilled(
 *     bytes32 orderHash,
 *     address indexed offerer,
 *     address indexed zone,
 *     address fulfiller,
 *     SpentItem[] offer,
 *       > (itemType, token, id, amount)
 *     ReceivedItem[] consideration
 *       > (itemType, token, id, amount, recipient)
 *   )
 *
 *  - 0x00: orderHash
 *  - 0x20: fulfiller
 *  - 0x40: offer offset (0x80)
 *  - 0x60: consideration offset (0x120)
 *  - 0x80: offer.length (1)
 *  - 0xa0: offerItemType
 *  - 0xc0: offerToken
 *  - 0xe0: offerIdentifier
 *  - 0x100: offerAmount
 *  - 0x120: consideration.length (1 + additionalRecipients.length)
 *  - 0x140: considerationItemType
 *  - 0x160: considerationToken
 *  - 0x180: considerationIdentifier
 *  - 0x1a0: considerationAmount
 *  - 0x1c0: considerationRecipient
 *  - ...
 */
// Minimum length of the OrderFulfilled event data.
// Must be added to the size of the ReceivedItem array for additionalRecipients
// (0xa0 * additionalRecipients.length) to calculate full size of the buffer.
uint256 constant OrderFulfilled_baseSize = 0x1e0;
uint256 constant OrderFulfilled_selector =
    (0x9d9af8e38d66c62e2c12f0225249fd9d721c54b83f48d9352c97c6cacdcb6f31);
// Minimum offset in memory to OrderFulfilled event data.
// Must be added to the size of the EIP712 hash array for additionalRecipients
// (32 * additionalRecipients.length) to calculate the pointer to event data.
uint256 constant OrderFulfilled_baseOffset = 0x180;
uint256 constant OrderFulfilled_consideration_length_baseOffset = 0x2a0;
uint256 constant OrderFulfilled_offer_length_baseOffset = 0x200;
uint256 constant OrderFulfilled_offer_length_offset_relativeTo_baseOffset = (
    0x80
);
uint256 constant OrderFulfilled_offer_itemType_offset_relativeTo_baseOffset = (
    0xa0
);
uint256 constant OrderFulfilled_offer_token_offset_relativeTo_baseOffset = 0xc0;
// Related constants used for restricted order checks on basic orders.
uint256 constant OrderFulfilled_baseDataSize = 0x160;
// uint256 constant ValidateOrder_offerDataOffset = 0x184;
// uint256 constant RatifyOrder_offerDataOffset = 0xc4;
// uint256 constant OrderFulfilled_orderHash_offset = 0x00;
uint256 constant OrderFulfilled_fulfiller_offset = 0x20;
uint256 constant OrderFulfilled_offer_head_offset = 0x40;
uint256 constant OrderFulfilled_offer_body_offset = 0x80;
uint256 constant OrderFulfilled_consideration_head_offset = 0x60;
uint256 constant OrderFulfilled_consideration_body_offset = 0x120;
/*
 * 3 memory slots/words for `authorizeOrder` and `validateOrder` calldata
 * to be used for tails of extra data (length 0) and order hashes (length 1)
 */
uint256 constant OrderFulfilled_post_memory_region_reservedBytes = 0x60;
/*
 * OrderFulfilled_offer_length_baseOffset - 12 * 0x20
 * we back up 12 words from where the `OrderFulfilled`'s data
 * for spent items start to be rewritten for `authorizeOrder`
 * and `validateOrder`. Let the reference pointer be `ptr`
 * pointing to the `OrderFulfilled`'s spent item array's length memory
 * position then we would have:
 *
 * ptr - 0x0180 : zero-padded calldata selector
 * ptr - 0x0160 : ZoneParameter's struct head (0x20)
 * ptr - 0x0140 : order hash
 * ptr - 0x0120 : fulfiller (msg.sender)
 * ptr - 0x0100 : offerer
 * ptr - 0x00e0 : spent items' head
 * ptr - 0x00c0 : received items' head
 * ptr - 0x00a0 : extra data / context head
 * ptr - 0x0080 : order hashes head
 * ptr - 0x0060 : start time
 * ptr - 0x0040 : end time
 * ptr - 0x0020 : zone hash
 * ptr - 0x0000 : offer.length (1)
 * ...
 *
 * Note that the padded calldata selector will be at minimum at the
 * 0x80 memory slot.
 */
uint256 constant authorizeOrder_calldata_baseOffset = (
    OrderFulfilled_offer_length_baseOffset - 0x180
);
// BasicOrderParameters
uint256 constant BasicOrder_parameters_cdPtr = 0x04;
uint256 constant BasicOrder_considerationToken_cdPtr = 0x24;
uint256 constant BasicOrder_considerationIdentifier_cdPtr = 0x44;
uint256 constant BasicOrder_considerationAmount_cdPtr = 0x64;
uint256 constant BasicOrder_offerer_cdPtr = 0x84;
uint256 constant BasicOrder_zone_cdPtr = 0xa4;
uint256 constant BasicOrder_offerToken_cdPtr = 0xc4;
uint256 constant BasicOrder_offerIdentifier_cdPtr = 0xe4;
uint256 constant BasicOrder_offerAmount_cdPtr = 0x104;
uint256 constant BasicOrder_basicOrderParameters_cd_offset = 0x24;
uint256 constant BasicOrder_basicOrderType_cdPtr = 0x124;
uint256 constant BasicOrder_startTime_cdPtr = 0x144;
uint256 constant BasicOrder_endTime_cdPtr = 0x164;
// uint256 constant BasicOrder_zoneHash_cdPtr = 0x184;
// uint256 constant BasicOrder_salt_cdPtr = 0x1a4;
uint256 constant BasicOrder_offererConduit_cdPtr = 0x1c4;
uint256 constant BasicOrder_fulfillerConduit_cdPtr = 0x1e4;
uint256 constant BasicOrder_totalOriginalAdditionalRecipients_cdPtr = 0x204;
uint256 constant BasicOrder_additionalRecipients_head_cdPtr = 0x224;
uint256 constant BasicOrder_signature_cdPtr = 0x244;
uint256 constant BasicOrder_additionalRecipients_length_cdPtr = 0x264;
uint256 constant BasicOrder_addlRecipients_length_cdPtr = 0x264;
uint256 constant BasicOrder_additionalRecipients_data_cdPtr = 0x284;
uint256 constant BasicOrder_parameters_ptr = 0x20;
uint256 constant BasicOrder_basicOrderType_range = 0x18; // 24 values
/*
 *  Memory layout in _prepareBasicFulfillmentFromCalldata of
 *  EIP712 data for ConsiderationItem
 *   - 0x80: ConsiderationItem EIP-712 typehash (constant)
 *   - 0xa0: itemType
 *   - 0xc0: token
 *   - 0xe0: identifier
 *   - 0x100: startAmount
 *   - 0x120: endAmount
 *   - 0x140: recipient
 */
uint256 constant BasicOrder_considerationItem_typeHash_ptr = 0x80; // memoryPtr
uint256 constant BasicOrder_considerationItem_itemType_ptr = 0xa0;
uint256 constant BasicOrder_considerationItem_token_ptr = 0xc0;
uint256 constant BasicOrder_considerationItem_identifier_ptr = 0xe0;
uint256 constant BasicOrder_considerationItem_startAmount_ptr = 0x100;
uint256 constant BasicOrder_considerationItem_endAmount_ptr = 0x120;
// uint256 constant BasicOrder_considerationItem_recipient_ptr = 0x140;
/*
 *  Memory layout in _prepareBasicFulfillmentFromCalldata of
 *  EIP712 data for OfferItem
 *   - 0x80:  OfferItem EIP-712 typehash (constant)
 *   - 0xa0:  itemType
 *   - 0xc0:  token
 *   - 0xe0:  identifier (reused for offeredItemsHash)
 *   - 0x100: startAmount
 *   - 0x120: endAmount
 */
uint256 constant BasicOrder_offerItem_typeHash_ptr = 0x80;
uint256 constant BasicOrder_offerItem_itemType_ptr = 0xa0;
uint256 constant BasicOrder_offerItem_token_ptr = 0xc0;
// uint256 constant BasicOrder_offerItem_identifier_ptr = 0xe0;
// uint256 constant BasicOrder_offerItem_startAmount_ptr = 0x100;
uint256 constant BasicOrder_offerItem_endAmount_ptr = 0x120;
/*
 *  Memory layout in _prepareBasicFulfillmentFromCalldata of
 *  EIP712 data for Order
 *   - 0x80:   Order EIP-712 typehash (constant)
 *   - 0xa0:   orderParameters.offerer
 *   - 0xc0:   orderParameters.zone
 *   - 0xe0:   keccak256(abi.encodePacked(offerHashes))
 *   - 0x100:  keccak256(abi.encodePacked(considerationHashes))
 *   - 0x120:  orderType
 *   - 0x140:  startTime
 *   - 0x160:  endTime
 *   - 0x180:  zoneHash
 *   - 0x1a0:  salt
 *   - 0x1c0:  conduit
 *   - 0x1e0:  _counters[orderParameters.offerer] (from storage)
 */
uint256 constant BasicOrder_order_typeHash_ptr = 0x80;
uint256 constant BasicOrder_order_offerer_ptr = 0xa0;
// uint256 constant BasicOrder_order_zone_ptr = 0xc0;
uint256 constant BasicOrder_order_offerHashes_ptr = 0xe0;
uint256 constant BasicOrder_order_considerationHashes_ptr = 0x100;
uint256 constant BasicOrder_order_orderType_ptr = 0x120;
uint256 constant BasicOrder_order_startTime_ptr = 0x140;
// uint256 constant BasicOrder_order_endTime_ptr = 0x160;
// uint256 constant BasicOrder_order_zoneHash_ptr = 0x180;
// uint256 constant BasicOrder_order_salt_ptr = 0x1a0;
// uint256 constant BasicOrder_order_conduitKey_ptr = 0x1c0;
uint256 constant BasicOrder_order_counter_ptr = 0x1e0;
uint256 constant BasicOrder_additionalRecipients_head_ptr = 0x240;
uint256 constant BasicOrder_signature_ptr = 0x260;
uint256 constant BasicOrder_startTimeThroughZoneHash_size = 0x60;
uint256 constant ContractOrder_orderHash_offerer_shift = 0x60;
uint256 constant Counter_blockhash_shift = 0x80;
// Signature-related
bytes32 constant EIP2098_allButHighestBitMask =
    (0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
bytes32 constant ECDSA_twentySeventhAndTwentyEighthBytesSet =
    (0x0000000000000000000000000000000000000000000000000000000101000000);
uint256 constant ECDSA_MaxLength = 65;
uint256 constant ECDSA_signature_s_offset = 0x40;
uint256 constant ECDSA_signature_v_offset = 0x60;
bytes32 constant EIP1271_isValidSignature_selector =
    (0x1626ba7e00000000000000000000000000000000000000000000000000000000);
uint256 constant EIP1271_isValidSignature_digest_negativeOffset = 0x40;
uint256 constant EIP1271_isValidSignature_selector_negativeOffset = 0x44;
uint256 constant EIP1271_isValidSignature_calldata_baseLength = 0x64;
uint256 constant EIP1271_isValidSignature_signature_head_offset = 0x40;
uint256 constant EIP_712_PREFIX =
    (0x1901000000000000000000000000000000000000000000000000000000000000);
uint256 constant ExtraGasBuffer = 0x20;
uint256 constant CostPerWord = 0x3;
uint256 constant MemoryExpansionCoefficientShift = 0x9;
uint256 constant Create2AddressDerivation_ptr = 0x0b;
uint256 constant Create2AddressDerivation_length = 0x55;
uint256 constant MaskOverByteTwelve =
    (0x0000000000000000000000ff0000000000000000000000000000000000000000);
uint256 constant MaskOverLastTwentyBytes =
    (0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff);
uint256 constant AddressDirtyUpperBitThreshold =
    (0x0000000000000000000000010000000000000000000000000000000000000000);
uint256 constant MaskOverFirstFourBytes =
    (0xffffffff00000000000000000000000000000000000000000000000000000000);
uint256 constant Conduit_execute_signature =
    (0x4ce34aa200000000000000000000000000000000000000000000000000000000);
uint256 constant MaxUint8 = 0xff;
uint256 constant MaxUint120 = 0xffffffffffffffffffffffffffffff;
uint256 constant Conduit_execute_ConduitTransfer_ptr = 0x20;
uint256 constant Conduit_execute_ConduitTransfer_length = 0x01;
uint256 constant Conduit_execute_ConduitTransfer_offset_ptr = 0x04;
uint256 constant Conduit_execute_ConduitTransfer_length_ptr = 0x24;
uint256 constant Conduit_execute_transferItemType_ptr = 0x44;
uint256 constant Conduit_execute_transferToken_ptr = 0x64;
uint256 constant Conduit_execute_transferFrom_ptr = 0x84;
uint256 constant Conduit_execute_transferTo_ptr = 0xa4;
uint256 constant Conduit_execute_transferIdentifier_ptr = 0xc4;
uint256 constant Conduit_execute_transferAmount_ptr = 0xe4;
uint256 constant OneConduitExecute_size = 0x104;
// Sentinel value to indicate that the conduit accumulator is not armed.
uint256 constant AccumulatorDisarmed = 0x20;
uint256 constant AccumulatorArmed = 0x40;
uint256 constant Accumulator_conduitKey_ptr = 0x20;
uint256 constant Accumulator_selector_ptr = 0x40;
uint256 constant Accumulator_array_offset_ptr = 0x44;
uint256 constant Accumulator_array_length_ptr = 0x64;
uint256 constant Accumulator_itemSizeOffsetDifference = 0x3c;
uint256 constant Accumulator_array_offset = 0x20;
uint256 constant Conduit_transferItem_size = 0xc0;
uint256 constant Conduit_transferItem_token_ptr = 0x20;
uint256 constant Conduit_transferItem_from_ptr = 0x40;
uint256 constant Conduit_transferItem_to_ptr = 0x60;
uint256 constant Conduit_transferItem_identifier_ptr = 0x80;
uint256 constant Conduit_transferItem_amount_ptr = 0xa0;
uint256 constant Ecrecover_precompile = 0x1;
uint256 constant Ecrecover_args_size = 0x80;
uint256 constant Signature_lower_v = 27;
// Bitmask that only gives a non-zero value if masked with a non-match selector.
uint256 constant NonMatchSelector_MagicMask =
    (0x4000000000000000000000000000000000000000000000000000000000);
// First bit indicates that a NATIVE offer items has been used and the 231st bit
// indicates that a non match selector has been called.
uint256 constant NonMatchSelector_InvalidErrorValue =
    (0x4000000000000000000000000000000000000000000000000000000001);
/**
 * @dev Selector and offsets for generateOrder
 *
 * function generateOrder(
 *   address fulfiller,
 *   SpentItem[] calldata minimumReceived,
 *   SpentItem[] calldata maximumSpent,
 *   bytes calldata context
 * )
 */
uint256 constant generateOrder_selector = 0x98919765;
uint256 constant generateOrder_selector_offset = 0x1c;
uint256 constant generateOrder_head_offset = 0x04;
uint256 constant generateOrder_minimumReceived_head_offset = 0x20;
uint256 constant generateOrder_maximumSpent_head_offset = 0x40;
uint256 constant generateOrder_context_head_offset = 0x60;
uint256 constant generateOrder_base_tail_offset = 0x80;
uint256 constant generateOrder_maximum_returned_array_length = 0xffff;
uint256 constant ratifyOrder_selector = 0xf4dd92ce;
uint256 constant ratifyOrder_selector_offset = 0x1c;
uint256 constant ratifyOrder_head_offset = 0x04;
// uint256 constant ratifyOrder_offer_head_offset = 0x00;
uint256 constant ratifyOrder_consideration_head_offset = 0x20;
uint256 constant ratifyOrder_context_head_offset = 0x40;
uint256 constant ratifyOrder_orderHashes_head_offset = 0x60;
uint256 constant ratifyOrder_contractNonce_offset = 0x80;
uint256 constant ratifyOrder_base_tail_offset = 0xa0;
uint256 constant validateOrder_selector = 0x17b1f942;
uint256 constant validateOrder_selector_offset = 0x1c;
uint256 constant validateOrder_head_offset = 0x04;
uint256 constant validateOrder_zoneParameters_offset = 0x20;
uint256 constant authorizeOrder_selector = 0x01e4d72a;
uint256 constant authorizeOrder_selector_offset = 0x1c;
uint256 constant authorizeOrder_head_offset = 0x04;
uint256 constant authorizeOrder_zoneParameters_offset = 0x20;
// uint256 constant ZoneParameters_orderHash_offset = 0x00;
uint256 constant ZoneParameters_fulfiller_offset = 0x20;
uint256 constant ZoneParameters_offerer_offset = 0x40;
uint256 constant ZoneParameters_offer_head_offset = 0x60;
uint256 constant ZoneParameters_consideration_head_offset = 0x80;
uint256 constant ZoneParameters_extraData_head_offset = 0xa0;
uint256 constant ZoneParameters_orderHashes_head_offset = 0xc0;
uint256 constant ZoneParameters_startTime_offset = 0xe0;
uint256 constant ZoneParameters_endTime_offset = 0x100;
uint256 constant ZoneParameters_zoneHash_offset = 0x120;
uint256 constant ZoneParameters_base_tail_offset = 0x140;
uint256 constant ZoneParameters_selectorAndPointer_length = 0x24;
uint256 constant ZoneParameters_basicOrderFixedElements_length = 0x44;
// ConsiderationDecoder Constants
uint256 constant OrderParameters_head_size = 0x0160;
uint256 constant OrderParameters_totalOriginalConsiderationItems_offset = (
    0x0140
);
uint256 constant AdvancedOrderPlusOrderParameters_head_size = 0x0200;
uint256 constant Order_signature_offset = 0x20;
uint256 constant Order_head_size = 0x40;
uint256 constant AdvancedOrder_fixed_segment_0 = 0x40;
uint256 constant CriteriaResolver_head_size = 0xa0;
uint256 constant CriteriaResolver_fixed_segment_0 = 0x80;
uint256 constant CriteriaResolver_criteriaProof_offset = 0x80;
uint256 constant FulfillmentComponent_mem_tail_size = 0x40;
uint256 constant FulfillmentComponent_mem_tail_size_shift = 0x6;
uint256 constant Fulfillment_head_size = 0x40;
uint256 constant Fulfillment_considerationComponents_offset = 0x20;
uint256 constant OrderComponents_OrderParameters_common_head_size = 0x0140;
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
enum OrderType {
    // 0: no partial fills, anyone can execute
    FULL_OPEN,
    // 1: partial fills supported, anyone can execute
    PARTIAL_OPEN,
    // 2: no partial fills, only offerer or zone can execute
    FULL_RESTRICTED,
    // 3: partial fills supported, only offerer or zone can execute
    PARTIAL_RESTRICTED,
    // 4: contract order type
    CONTRACT
}
enum BasicOrderType {
    // 0: no partial fills, anyone can execute
    ETH_TO_ERC721_FULL_OPEN,
    // 1: partial fills supported, anyone can execute
    ETH_TO_ERC721_PARTIAL_OPEN,
    // 2: no partial fills, only offerer or zone can execute
    ETH_TO_ERC721_FULL_RESTRICTED,
    // 3: partial fills supported, only offerer or zone can execute
    ETH_TO_ERC721_PARTIAL_RESTRICTED,
    // 4: no partial fills, anyone can execute
    ETH_TO_ERC1155_FULL_OPEN,
    // 5: partial fills supported, anyone can execute
    ETH_TO_ERC1155_PARTIAL_OPEN,
    // 6: no partial fills, only offerer or zone can execute
    ETH_TO_ERC1155_FULL_RESTRICTED,
    // 7: partial fills supported, only offerer or zone can execute
    ETH_TO_ERC1155_PARTIAL_RESTRICTED,
    // 8: no partial fills, anyone can execute
    ERC20_TO_ERC721_FULL_OPEN,
    // 9: partial fills supported, anyone can execute
    ERC20_TO_ERC721_PARTIAL_OPEN,
    // 10: no partial fills, only offerer or zone can execute
    ERC20_TO_ERC721_FULL_RESTRICTED,
    // 11: partial fills supported, only offerer or zone can execute
    ERC20_TO_ERC721_PARTIAL_RESTRICTED,
    // 12: no partial fills, anyone can execute
    ERC20_TO_ERC1155_FULL_OPEN,
    // 13: partial fills supported, anyone can execute
    ERC20_TO_ERC1155_PARTIAL_OPEN,
    // 14: no partial fills, only offerer or zone can execute
    ERC20_TO_ERC1155_FULL_RESTRICTED,
    // 15: partial fills supported, only offerer or zone can execute
    ERC20_TO_ERC1155_PARTIAL_RESTRICTED,
    // 16: no partial fills, anyone can execute
    ERC721_TO_ERC20_FULL_OPEN,
    // 17: partial fills supported, anyone can execute
    ERC721_TO_ERC20_PARTIAL_OPEN,
    // 18: no partial fills, only offerer or zone can execute
    ERC721_TO_ERC20_FULL_RESTRICTED,
    // 19: partial fills supported, only offerer or zone can execute
    ERC721_TO_ERC20_PARTIAL_RESTRICTED,
    // 20: no partial fills, anyone can execute
    ERC1155_TO_ERC20_FULL_OPEN,
    // 21: partial fills supported, anyone can execute
    ERC1155_TO_ERC20_PARTIAL_OPEN,
    // 22: no partial fills, only offerer or zone can execute
    ERC1155_TO_ERC20_FULL_RESTRICTED,
    // 23: partial fills supported, only offerer or zone can execute
    ERC1155_TO_ERC20_PARTIAL_RESTRICTED
}
enum BasicOrderRouteType {
    // 0: provide Ether (or other native token) to receive offered ERC721 item.
    ETH_TO_ERC721,
    // 1: provide Ether (or other native token) to receive offered ERC1155 item.
    ETH_TO_ERC1155,
    // 2: provide ERC20 item to receive offered ERC721 item.
    ERC20_TO_ERC721,
    // 3: provide ERC20 item to receive offered ERC1155 item.
    ERC20_TO_ERC1155,
    // 4: provide ERC721 item to receive offered ERC20 item.
    ERC721_TO_ERC20,
    // 5: provide ERC1155 item to receive offered ERC20 item.
    ERC1155_TO_ERC20
}
enum ItemType {
    // 0: ETH on mainnet, MATIC on polygon, etc.
    NATIVE,
    // 1: ERC20 items (ERC777 and ERC20 analogues could also technically work)
    ERC20,
    // 2: ERC721 items
    ERC721,
    // 3: ERC1155 items
    ERC1155,
    // 4: ERC721 items where a number of tokenIds are supported
    ERC721_WITH_CRITERIA,
    // 5: ERC1155 items where a number of ids are supported
    ERC1155_WITH_CRITERIA
}
enum Side {
    // 0: Items that can be spent
    OFFER,
    // 1: Items that must be received
    CONSIDERATION
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ItemType,
    OrderType
} from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    AdvancedOrder,
    ConsiderationItem,
    CriteriaResolver,
    OfferItem,
    OrderParameters,
    ReceivedItem,
    SpentItem
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import { BasicOrderFulfiller } from "./BasicOrderFulfiller.sol";
import { CriteriaResolution } from "./CriteriaResolution.sol";
import { AmountDeriver } from "./AmountDeriver.sol";
import {
    _revertInsufficientNativeTokensSupplied,
    _revertInvalidNativeOfferItem
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    AccumulatorDisarmed,
    ConsiderationItem_recipient_offset,
    ReceivedItem_amount_offset,
    ReceivedItem_recipient_offset
} from "seaport-types/src/lib/ConsiderationConstants.sol";
/**
 * @title OrderFulfiller
 * @author 0age
 * @notice OrderFulfiller contains logic related to order fulfillment where a
 *         single order is being fulfilled and where basic order fulfillment is
 *         not available as an option.
 */
contract OrderFulfiller is
    BasicOrderFulfiller,
    CriteriaResolution,
    AmountDeriver
{
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(
        address conduitController
    ) BasicOrderFulfiller(conduitController) {}
    /**
     * @dev Internal function to validate an order and update its status, adjust
     *      prices based on current time, apply criteria resolvers, determine
     *      what portion to fill, and transfer relevant tokens.
     *
     * @param advancedOrder       The order to fulfill as well as the fraction
     *                            to fill. Note that all offer and consideration
     *                            components must divide with no remainder for
     *                            the partial fill to be valid.
     * @param criteriaResolvers   An array where each element contains a
     *                            reference to a specific offer or
     *                            consideration, a token identifier, and a proof
     *                            that the supplied token identifier is
     *                            contained in the order's merkle root. Note
     *                            that a criteria of zero indicates that any
     *                            (transferable) token identifier is valid and
     *                            that no proof needs to be supplied.
     * @param fulfillerConduitKey A bytes32 value indicating what conduit, if
     *                            any, to source the fulfiller's token approvals
     *                            from. The zero hash signifies that no conduit
     *                            should be used, with direct approvals set on
     *                            Consideration.
     * @param recipient           The intended recipient for all received items.
     *
     * @return A boolean indicating whether the order has been fulfilled.
     */
    function _validateAndFulfillAdvancedOrder(
        AdvancedOrder memory advancedOrder,
        CriteriaResolver[] memory criteriaResolvers,
        bytes32 fulfillerConduitKey,
        address recipient
    ) internal returns (bool) {
        // Retrieve the order parameters and order type.
        OrderParameters memory orderParameters = advancedOrder.parameters;
        OrderType orderType = orderParameters.orderType;
        // Ensure this function cannot be triggered during a reentrant call.
        _setReentrancyGuard(
            // Native tokens accepted during execution for contract order types.
            orderType == OrderType.CONTRACT
        );
        // Validate order, update status, and determine fraction to fill.
        (
            bytes32 orderHash,
            uint256 fillNumerator,
            uint256 fillDenominator
        ) = _validateOrder(advancedOrder, _runTimeConstantTrue());
        // Create an array with length 1 containing the order.
        AdvancedOrder[] memory advancedOrders = new AdvancedOrder[](1);
        // Populate the order as the first and only element of the new array.
        advancedOrders[0] = advancedOrder;
        // Apply criteria resolvers using generated orders and details arrays.
        _applyCriteriaResolvers(advancedOrders, criteriaResolvers);
        // Derive each item transfer with the appropriate fractional amount.
        _applyFractions(
            orderParameters,
            fillNumerator,
            fillDenominator,
            recipient
        );
        // Declare an empty length-1 array to hold the order hash, but do not
        // write to it until after the order has been authorized or generated.
        bytes32[] memory orderHashes = new bytes32[](1);
        // Declare a boolean that cannot be optimized out by the compiler
        // outside of the if-else statement so it can be used in either.
        bool _true = _runTimeConstantTrue();
        if (orderType != OrderType.CONTRACT) {
            _assertRestrictedAdvancedOrderAuthorization(
                advancedOrder,
                orderHashes,
                orderHash,
                0
            );
            _updateStatus(orderHash, fillNumerator, fillDenominator, _true);
        } else {
            // Return the generated order based on the order params and the
            // provided extra data.
            orderHash = _getGeneratedOrder(
                orderParameters,
                advancedOrder.extraData,
                _true
            );
        }
        _transferEach(orderParameters, fulfillerConduitKey, recipient);
        // Write the order hash to the orderHashes array.
        orderHashes[0] = orderHash;
        // Ensure restricted orders have a valid submitter or pass a zone check.
        _assertRestrictedAdvancedOrderValidity(
            advancedOrder,
            orderHashes,
            orderHash
        );
        // Emit an event signifying that the order has been fulfilled.
        _emitOrderFulfilledEvent(
            orderHash,
            orderParameters.offerer,
            orderParameters.zone,
            recipient,
            orderParameters.offer,
            orderParameters.consideration
        );
        // Clear the reentrancy guard.
        _clearReentrancyGuard();
        return true;
    }
    /**
     * @dev Internal function to derive the amount to transfer for each item in
     *      a given order based on the fraction to fill and the current time.
     *
     * @param orderParameters     The parameters for the fulfilled order.
     * @param numerator           A value indicating the portion of the order
     *                            that should be filled.
     * @param denominator         A value indicating the total order size.
     * @param recipient           The intended recipient for all received items.
     */
    function _applyFractions(
        OrderParameters memory orderParameters,
        uint256 numerator,
        uint256 denominator,
        address recipient
    ) internal view {
        // Read start time & end time from order parameters and place on stack.
        uint256 startTime = orderParameters.startTime;
        uint256 endTime = orderParameters.endTime;
        // As of solidity 0.6.0, inline assembly cannot directly access function
        // definitions, but can still access locally scoped function variables.
        // This means that a local variable to reference the internal function
        // definition (using the same type), along with a local variable with
        // the desired type, must first be created. Then, the original function
        // pointer can be recast to the desired type.
        /**
         * Repurpose existing OfferItem memory regions on the offer array for
         * the order by overriding the _transfer function pointer to accept a
         * modified OfferItem argument in place of the usual ReceivedItem:
         *
         *   ========= OfferItem ==========   ====== ReceivedItem ======
         *   ItemType itemType; ------------> ItemType itemType;
         *   address token; ----------------> address token;
         *   uint256 identifierOrCriteria; -> uint256 identifier;
         *   uint256 startAmount; ----------> uint256 amount;
         *   uint256 endAmount; ------------> address recipient;
         */
        // Declare a nested scope to minimize stack depth.
        unchecked {
            // Read offer array length from memory and place on stack.
            uint256 totalOfferItems = orderParameters.offer.length;
            // Create a variable to indicate whether the order has any
            // native offer items
            uint256 anyNativeItems;
            // Iterate over each offer on the order.
            // Skip overflow check as for loop is indexed starting at zero.
            for (uint256 i = 0; i < totalOfferItems; ++i) {
                // Retrieve the offer item.
                OfferItem memory offerItem = orderParameters.offer[i];
                // Offer items for the native token can not be received outside
                // of a match order function except as part of a contract order.
                {
                    ItemType itemType = offerItem.itemType;
                    assembly {
                        anyNativeItems := or(anyNativeItems, iszero(itemType))
                    }
                }
                // Declare an additional nested scope to minimize stack depth.
                {
                    // Apply fill fraction to get offer item amount to transfer.
                    uint256 amount = _applyFraction(
                        offerItem.startAmount,
                        offerItem.endAmount,
                        numerator,
                        denominator,
                        startTime,
                        endTime,
                        _runTimeConstantFalse()
                    );
                    // Utilize assembly to set overloaded offerItem arguments.
                    assembly {
                        // Write new fractional amount to startAmount as amount.
                        mstore(
                            add(offerItem, ReceivedItem_amount_offset),
                            amount
                        )
                        // Write recipient to endAmount.
                        mstore(
                            add(offerItem, ReceivedItem_recipient_offset),
                            recipient
                        )
                    }
                }
            }
            // If a non-contract order has native offer items, throw with an
            // `InvalidNativeOfferItem` custom error.
            {
                OrderType orderType = orderParameters.orderType;
                uint256 invalidNativeOfferItem;
                assembly {
                    invalidNativeOfferItem := and(
                        // Note that this check requires that there are no
                        // order types beyond the current set (0-4). It will
                        // need to be modified when adding more order types.
                        lt(orderType, 4),
                        anyNativeItems
                    )
                }
                if (invalidNativeOfferItem != 0) {
                    _revertInvalidNativeOfferItem();
                }
            }
        }
        /**
         * Repurpose existing ConsiderationItem memory regions on the
         * consideration array for the order by overriding the _transfer
         * function pointer to accept a modified ConsiderationItem argument in
         * place of the usual ReceivedItem:
         *
         *   ====== ConsiderationItem =====   ====== ReceivedItem ======
         *   ItemType itemType; ------------> ItemType itemType;
         *   address token; ----------------> address token;
         *   uint256 identifierOrCriteria;--> uint256 identifier;
         *   uint256 startAmount; ----------> uint256 amount;
         *   uint256 endAmount;        /----> address recipient;
         *   address recipient; ------/
         */
        // Declare a nested scope to minimize stack depth.
        unchecked {
            // Read consideration array length from memory and place on stack.
            uint256 totalConsiderationItems = orderParameters
                .consideration
                .length;
            // Iterate over each consideration item on the order.
            // Skip overflow check as for loop is indexed starting at zero.
            for (uint256 i = 0; i < totalConsiderationItems; ++i) {
                // Retrieve the consideration item.
                ConsiderationItem memory considerationItem = (
                    orderParameters.consideration[i]
                );
                // Apply fraction & derive considerationItem amount to transfer.
                uint256 amount = _applyFraction(
                    considerationItem.startAmount,
                    considerationItem.endAmount,
                    numerator,
                    denominator,
                    startTime,
                    endTime,
                    _runTimeConstantTrue()
                );
                // Use assembly to set overloaded considerationItem arguments.
                assembly {
                    // Write derived fractional amount to startAmount as amount.
                    mstore(
                        add(considerationItem, ReceivedItem_amount_offset),
                        amount
                    )
                    // Write original recipient to endAmount as recipient.
                    mstore(
                        add(considerationItem, ReceivedItem_recipient_offset),
                        mload(
                            add(
                                considerationItem,
                                ConsiderationItem_recipient_offset
                            )
                        )
                    )
                }
            }
        }
    }
    /**
     * @dev Internal function to transfer each item contained in a given single
     *      order fulfillment.
     *
     * @param orderParameters     The parameters for the fulfilled order.
     * @param fulfillerConduitKey A bytes32 value indicating what conduit, if
     *                            any, to source the fulfiller's token approvals
     *                            from. The zero hash signifies that no conduit
     *                            should be used, with direct approvals set on
     *                            Consideration.
     * @param recipient           The intended recipient for all received items.
     */
    function _transferEach(
        OrderParameters memory orderParameters,
        bytes32 fulfillerConduitKey,
        address recipient
    ) internal {
        // Initialize an accumulator array. From this point forward, no new
        // memory regions can be safely allocated until the accumulator is no
        // longer being utilized, as the accumulator operates in an open-ended
        // fashion from this memory pointer; existing memory may still be
        // accessed and modified, however.
        bytes memory accumulator = new bytes(AccumulatorDisarmed);
        // As of solidity 0.6.0, inline assembly cannot directly access function
        // definitions, but can still access locally scoped function variables.
        // This means that a local variable to reference the internal function
        // definition (using the same type), along with a local variable with
        // the desired type, must first be created. Then, the original function
        // pointer can be recast to the desired type.
        /**
         * Repurpose existing OfferItem memory regions on the offer array for
         * the order by overriding the _transfer function pointer to accept a
         * modified OfferItem argument in place of the usual ReceivedItem:
         *
         *   ========= OfferItem ==========   ====== ReceivedItem ======
         *   ItemType itemType; ------------> ItemType itemType;
         *   address token; ----------------> address token;
         *   uint256 identifierOrCriteria; -> uint256 identifier;
         *   uint256 startAmount; ----------> uint256 amount;
         *   uint256 endAmount; ------------> address recipient;
         */
        // Declare a nested scope to minimize stack depth.
        unchecked {
            // Read offer array length from memory and place on stack.
            uint256 totalOfferItems = orderParameters.offer.length;
            // Iterate over each offer on the order.
            // Skip overflow check as for loop is indexed starting at zero.
            for (uint256 i = 0; i < totalOfferItems; ++i) {
                // Retrieve the offer item.
                OfferItem memory offerItem = orderParameters.offer[i];
                // Utilize assembly to set overloaded offerItem arguments.
                assembly {
                    // Write recipient to endAmount.
                    mstore(
                        add(offerItem, ReceivedItem_recipient_offset),
                        recipient
                    )
                }
                // Transfer the item from the offerer to the recipient.
                _toOfferItemInput(_transfer)(
                    offerItem,
                    orderParameters.offerer,
                    orderParameters.conduitKey,
                    accumulator
                );
            }
        }
        // Declare a variable for the available native token balance.
        uint256 nativeTokenBalance;
        /**
         * Repurpose existing ConsiderationItem memory regions on the
         * consideration array for the order by overriding the _transfer
         * function pointer to accept a modified ConsiderationItem argument in
         * place of the usual ReceivedItem:
         *
         *   ====== ConsiderationItem =====   ====== ReceivedItem ======
         *   ItemType itemType; ------------> ItemType itemType;
         *   address token; ----------------> address token;
         *   uint256 identifierOrCriteria;--> uint256 identifier;
         *   uint256 startAmount; ----------> uint256 amount;
         *   uint256 endAmount;        /----> address recipient;
         *   address recipient; ------/
         */
        // Declare a nested scope to minimize stack depth.
        unchecked {
            // Read consideration array length from memory and place on stack.
            uint256 totalConsiderationItems = orderParameters
                .consideration
                .length;
            // Iterate over each consideration item on the order.
            // Skip overflow check as for loop is indexed starting at zero.
            for (uint256 i = 0; i < totalConsiderationItems; ++i) {
                // Retrieve the consideration item.
                ConsiderationItem memory considerationItem = (
                    orderParameters.consideration[i]
                );
                if (considerationItem.itemType == ItemType.NATIVE) {
                    // Get the current available balance of native tokens.
                    assembly {
                        nativeTokenBalance := selfbalance()
                    }
                    // Ensure that sufficient native tokens are still available.
                    if (considerationItem.startAmount > nativeTokenBalance) {
                        _revertInsufficientNativeTokensSupplied();
                    }
                }
                // Transfer item from caller to recipient specified by the item.
                _toConsiderationItemInput(_transfer)(
                    considerationItem,
                    msg.sender,
                    fulfillerConduitKey,
                    accumulator
                );
            }
        }
        // Trigger any remaining accumulated transfers via call to the conduit.
        _triggerIfArmed(accumulator);
        // Determine whether any native token balance remains.
        assembly {
            nativeTokenBalance := selfbalance()
        }
        // Return any remaining native token balance to the caller.
        if (nativeTokenBalance != 0) {
            _transferNativeTokens(payable(msg.sender), nativeTokenBalance);
        }
    }
    /**
     * @dev Internal function to emit an OrderFulfilled event. OfferItems are
     *      translated into SpentItems and ConsiderationItems are translated
     *      into ReceivedItems.
     *
     * @param orderHash     The order hash.
     * @param offerer       The offerer for the order.
     * @param zone          The zone for the order.
     * @param recipient     The recipient of the order, or the null address if
     *                      the order was fulfilled via order matching.
     * @param offer         The offer items for the order.
     * @param consideration The consideration items for the order.
     */
    function _emitOrderFulfilledEvent(
        bytes32 orderHash,
        address offerer,
        address zone,
        address recipient,
        OfferItem[] memory offer,
        ConsiderationItem[] memory consideration
    ) internal {
        // Cast already-modified offer memory region as spent items.
        SpentItem[] memory spentItems;
        assembly {
            spentItems := offer
        }
        // Cast already-modified consideration memory region as received items.
        ReceivedItem[] memory receivedItems;
        assembly {
            receivedItems := consideration
        }
        // Emit an event signifying that the order has been fulfilled.
        emit OrderFulfilled(
            orderHash,
            offerer,
            zone,
            recipient,
            spentItems,
            receivedItems
        );
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import { ItemType, Side } from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    AdvancedOrder,
    Execution,
    FulfillmentComponent,
    ReceivedItem
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {
    _revertMissingFulfillmentComponentOnAggregation
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    FulfillmentApplicationErrors
} from "seaport-types/src/interfaces/FulfillmentApplicationErrors.sol";
import {
    AdvancedOrder_numerator_offset,
    Common_amount_offset,
    Common_identifier_offset,
    Common_token_offset,
    Execution_conduit_offset,
    Execution_offerer_offset,
    Fulfillment_itemIndex_offset,
    OneWord,
    OneWordShift,
    OrderParameters_conduit_offset,
    OrderParameters_consideration_head_offset,
    OrderParameters_offer_head_offset,
    ReceivedItem_CommonParams_size,
    ReceivedItem_recipient_offset,
    ReceivedItem_size
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    Error_selector_offset,
    InvalidFulfillmentComponentData_error_length,
    InvalidFulfillmentComponentData_error_selector,
    MismatchedOfferAndConsiderationComponents_error_idx_ptr,
    MismatchedOfferAndConsiderationComponents_error_length,
    MismatchedOfferAndConsiderationComponents_error_selector,
    MissingItemAmount_error_length,
    MissingItemAmount_error_selector,
    OfferAndConsiderationRequiredOnFulfillment_error_length,
    OfferAndConsiderationRequiredOnFulfillment_error_selector,
    Panic_arithmetic,
    Panic_error_code_ptr,
    Panic_error_length,
    Panic_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
/**
 * @title FulfillmentApplier
 * @author 0age
 * @notice FulfillmentApplier contains logic related to applying fulfillments,
 *         both as part of order matching (where offer items are matched to
 *         consideration items) as well as fulfilling available orders (where
 *         order items and consideration items are independently aggregated).
 */
contract FulfillmentApplier is FulfillmentApplicationErrors {
    /**
     * @dev Internal pure function to match offer items to consideration items
     *      on a group of orders via a supplied fulfillment.
     *
     * @param advancedOrders          The orders to match.
     * @param offerComponents         An array designating offer components to
     *                                match to consideration components.
     * @param considerationComponents An array designating consideration
     *                                components to match to offer components.
     *                                Note that each consideration amount must
     *                                be zero in order for the match operation
     *                                to be valid.
     * @param fulfillmentIndex        The index of the fulfillment being
     *                                applied.
     *
     * @return execution The transfer performed as a result of the fulfillment.
     */
    function _applyFulfillment(
        AdvancedOrder[] memory advancedOrders,
        FulfillmentComponent[] memory offerComponents,
        FulfillmentComponent[] memory considerationComponents,
        uint256 fulfillmentIndex
    ) internal pure returns (Execution memory execution) {
        // Ensure 1+ of both offer and consideration components are supplied.
        assembly {
            if or(
                iszero(mload(offerComponents)),
                iszero(mload(considerationComponents))
            ) {
                // Store left-padded selector with push4 (reduces bytecode),
                // mem[28:32] = selector
                mstore(
                    0,
                    OfferAndConsiderationRequiredOnFulfillment_error_selector
                )
                // revert(abi.encodeWithSignature(
                //     "OfferAndConsiderationRequiredOnFulfillment()"
                // ))
                revert(
                    Error_selector_offset,
                    OfferAndConsiderationRequiredOnFulfillment_error_length
                )
            }
        }
        // Declare a new Execution struct.
        Execution memory considerationExecution;
        // Validate & aggregate consideration items to new Execution object.
        _aggregateValidFulfillmentConsiderationItems(
            advancedOrders,
            considerationComponents,
            considerationExecution,
            address(0),
            bytes32(0)
        );
        // Retrieve the consideration item from the execution struct.
        ReceivedItem memory considerationItem = considerationExecution.item;
        // Skip aggregating offer items if no consideration items are available.
        if (considerationItem.amount == 0) {
            return considerationExecution;
        }
        // Validate & aggregate offer items to Execution object.
        _aggregateValidFulfillmentOfferItems(
            advancedOrders,
            offerComponents,
            execution,
            considerationItem.recipient
        );
        ReceivedItem memory executionItem = execution.item;
        // Ensure offer & consideration item types, tokens, & identifiers match.
        // (a != b || c != d || e != f) == (((a ^ b) | (c ^ d) | (e ^ f)) != 0),
        // but the second expression requires less gas to evaluate.
        assembly {
            if or(
                or(
                    xor(
                        mload(executionItem), // no offset for item type
                        mload(considerationItem) // no offset for item type
                    ),
                    xor(
                        mload(add(executionItem, Common_token_offset)),
                        mload(add(considerationItem, Common_token_offset))
                    )
                ),
                xor(
                    mload(add(executionItem, Common_identifier_offset)),
                    mload(add(considerationItem, Common_identifier_offset))
                )
            ) {
                // Store left-padded selector with push4 (reduces bytecode),
                // mem[28:32] = selector
                mstore(
                    0,
                    MismatchedOfferAndConsiderationComponents_error_selector
                )
                // Store fulfillment index argument.
                mstore(
                    MismatchedOfferAndConsiderationComponents_error_idx_ptr,
                    fulfillmentIndex
                )
                // Revert: `MismatchedOfferAndConsiderationComponents(uint256)`
                revert(
                    Error_selector_offset,
                    MismatchedOfferAndConsiderationComponents_error_length
                )
            }
        }
        // If total consideration amount exceeds the offer amount...
        if (considerationItem.amount > executionItem.amount) {
            // Retrieve the first consideration component from the fulfillment.
            FulfillmentComponent memory targetComponent = (
                considerationComponents[0]
            );
            // Skip underflow check as the conditional being true implies that
            // considerationItem.amount > execution.item.amount.
            unchecked {
                // Add excess consideration item amount to original order array.
                advancedOrders[targetComponent.orderIndex]
                    .parameters
                    .consideration[targetComponent.itemIndex]
                    .startAmount = (considerationItem.amount -
                    executionItem.amount);
            }
        } else {
            // Retrieve the first offer component from the fulfillment.
            FulfillmentComponent memory targetComponent = offerComponents[0];
            // Skip underflow check as the conditional being false implies that
            // execution.item.amount >= considerationItem.amount.
            unchecked {
                // Add excess offer item amount to the original array of orders.
                advancedOrders[targetComponent.orderIndex]
                    .parameters
                    .offer[targetComponent.itemIndex]
                    .startAmount = (executionItem.amount -
                    considerationItem.amount);
            }
            // Reduce total offer amount to equal the consideration amount.
            executionItem.amount = considerationItem.amount;
        }
        // Return the final execution that will be triggered for relevant items.
        return execution; // Execution(executionItem, offerer, conduitKey);
    }
    /**
     * @dev Internal view function to aggregate offer or consideration items
     *      from a group of orders into a single execution via a supplied array
     *      of fulfillment components. Items that are not available to aggregate
     *      will not be included in the aggregated execution.
     *
     * @param advancedOrders        The orders to aggregate.
     * @param side                  The side (i.e. offer or consideration).
     * @param fulfillmentComponents An array designating item components to
     *                              aggregate if part of an available order.
     * @param fulfillerConduitKey   A bytes32 value indicating what conduit, if
     *                              any, to source the fulfiller's token
     *                              approvals from. The zero hash signifies that
     *                              no conduit should be used, with approvals
     *                              set directly on this contract.
     * @param recipient             The intended recipient for all received
     *                              items.
     *
     * @return execution The transfer performed as a result of the fulfillment.
     */
    function _aggregateAvailable(
        AdvancedOrder[] memory advancedOrders,
        Side side,
        FulfillmentComponent[] memory fulfillmentComponents,
        bytes32 fulfillerConduitKey,
        address recipient
    ) internal view returns (Execution memory execution) {
        // Skip overflow / underflow checks; conditions checked or unreachable.
        unchecked {
            // Retrieve fulfillment components array length and place on stack.
            // Ensure at least one fulfillment component has been supplied.
            if (fulfillmentComponents.length == 0) {
                _revertMissingFulfillmentComponentOnAggregation(side);
            }
            // If the fulfillment components are offer components...
            if (side == Side.OFFER) {
                // Return execution for aggregated items provided by offerer.
                _aggregateValidFulfillmentOfferItems(
                    advancedOrders,
                    fulfillmentComponents,
                    execution,
                    payable(recipient)
                );
            } else {
                // Otherwise, fulfillment components are consideration
                // components. Return execution for aggregated items provided by
                // the fulfiller.
                _aggregateValidFulfillmentConsiderationItems(
                    advancedOrders,
                    fulfillmentComponents,
                    execution,
                    msg.sender,
                    fulfillerConduitKey
                );
            }
        }
    }
    /**
     * @dev Internal pure function to aggregate a group of offer items using
     *      supplied directives on which component items are candidates for
     *      aggregation, skipping items on orders that are not available.
     *
     * @param advancedOrders  The orders to aggregate offer items from.
     * @param offerComponents An array of FulfillmentComponent structs
     *                        indicating the order index and item index of each
     *                        candidate offer item for aggregation.
     * @param execution       The execution to apply the aggregation to.
     * @param recipient       The intended recipient for the received item.
     */
    function _aggregateValidFulfillmentOfferItems(
        AdvancedOrder[] memory advancedOrders,
        FulfillmentComponent[] memory offerComponents,
        Execution memory execution,
        address payable recipient
    ) internal pure {
        assembly {
            // Declare a variable for the final aggregated item amount.
            let amount
            // Declare a variable to track errors encountered with amount.
            let errorBuffer
            // Declare a variable for the hash of itemType, token, & identifier.
            let dataHash
            // Iterate over each offer component.
            for {
                // Create variable to track position in offerComponents head.
                let fulfillmentHeadPtr := offerComponents
                // Get position of the last element in head of array.
                let endPtr := add(
                    offerComponents,
                    shl(OneWordShift, mload(offerComponents))
                )
            } lt(fulfillmentHeadPtr, endPtr) {
            } {
                // Increment position in considerationComponents head.
                fulfillmentHeadPtr := add(fulfillmentHeadPtr, OneWord)
                // Ensure that the order index is not out of range.
                if iszero(
                    lt(mload(mload(fulfillmentHeadPtr)), mload(advancedOrders))
                ) {
                    throwInvalidFulfillmentComponentData()
                }
                // Read advancedOrders[orderIndex] pointer from its array head.
                let orderPtr := mload(
                    // Calculate head position of advancedOrders[orderIndex]
                    add(
                        add(advancedOrders, OneWord),
                        shl(OneWordShift, mload(mload(fulfillmentHeadPtr)))
                    )
                )
                // Read the pointer to OrderParameters from the AdvancedOrder.
                let paramsPtr := mload(orderPtr)
                // Retrieve item index using an offset of fulfillment pointer.
                let itemIndex := mload(
                    add(mload(fulfillmentHeadPtr), Fulfillment_itemIndex_offset)
                )
                let offerItemPtr
                {
                    // Load the offer array pointer.
                    let offerArrPtr := mload(
                        add(paramsPtr, OrderParameters_offer_head_offset)
                    )
                    // If the offer item index is out of range or the numerator
                    // is zero, skip this item.
                    if or(
                        iszero(lt(itemIndex, mload(offerArrPtr))),
                        iszero(
                            mload(add(orderPtr, AdvancedOrder_numerator_offset))
                        )
                    ) {
                        continue
                    }
                    // Retrieve offer item pointer using the item index.
                    offerItemPtr := mload(
                        add(
                            // Get pointer to beginning of receivedItem.
                            add(offerArrPtr, OneWord),
                            // Calculate offset to pointer for the order.
                            shl(OneWordShift, itemIndex)
                        )
                    )
                }
                // Declare a separate scope for the amount update.
                {
                    // Retrieve amount pointer using consideration item pointer.
                    let amountPtr := add(offerItemPtr, Common_amount_offset)
                    // Add offer item amount to execution amount.
                    let newAmount := add(amount, mload(amountPtr))
                    // Update error buffer:
                    // 1 = zero amount, 2 = overflow, 3 = both.
                    errorBuffer := or(
                        errorBuffer,
                        or(
                            shl(1, lt(newAmount, amount)),
                            iszero(mload(amountPtr))
                        )
                    )
                    // Update the amount to the new, summed amount.
                    amount := newAmount
                    // Zero out amount on original item to indicate it is spent.
                    mstore(amountPtr, 0)
                }
                // Retrieve ReceivedItem pointer from Execution.
                let receivedItem := mload(execution)
                // Check if this is the first valid fulfillment item.
                switch iszero(dataHash)
                case 1 {
                    // On first valid item, populate the received item in memory
                    // for later comparison.
                    // Set the item type on the received item.
                    mstore(receivedItem, mload(offerItemPtr))
                    // Set the token on the received item.
                    mstore(
                        add(receivedItem, Common_token_offset),
                        mload(add(offerItemPtr, Common_token_offset))
                    )
                    // Set the identifier on the received item.
                    mstore(
                        add(receivedItem, Common_identifier_offset),
                        mload(add(offerItemPtr, Common_identifier_offset))
                    )
                    // Set the recipient on the received item.
                    mstore(
                        add(receivedItem, ReceivedItem_recipient_offset),
                        recipient
                    )
                    // Set offerer on returned execution using order pointer.
                    mstore(
                        add(execution, Execution_offerer_offset),
                        mload(paramsPtr)
                    )
                    // Set execution conduitKey via order pointer offset.
                    mstore(
                        add(execution, Execution_conduit_offset),
                        mload(add(paramsPtr, OrderParameters_conduit_offset))
                    )
                    // Calculate the hash of (itemType, token, identifier).
                    dataHash := keccak256(
                        receivedItem,
                        ReceivedItem_CommonParams_size
                    )
                    // If component index > 0, swap component pointer with
                    // pointer to first component so that any remainder after
                    // fulfillment can be added back to the first item.
                    let firstFulfillmentHeadPtr := add(offerComponents, OneWord)
                    if xor(firstFulfillmentHeadPtr, fulfillmentHeadPtr) {
                        let fulfillmentPtr := mload(fulfillmentHeadPtr)
                        mstore(firstFulfillmentHeadPtr, fulfillmentPtr)
                    }
                }
                default {
                    // Compare every subsequent item to the first.
                    if or(
                        or(
                            // The offerer must match on both items.
                            xor(
                                mload(paramsPtr),
                                mload(add(execution, Execution_offerer_offset))
                            ),
                            // The conduit key must match on both items.
                            xor(
                                mload(
                                    add(
                                        paramsPtr,
                                        OrderParameters_conduit_offset
                                    )
                                ),
                                mload(add(execution, Execution_conduit_offset))
                            )
                        ),
                        // The itemType, token, and identifier must match.
                        xor(
                            dataHash,
                            keccak256(
                                offerItemPtr,
                                ReceivedItem_CommonParams_size
                            )
                        )
                    ) {
                        // Throw if any of the requirements are not met.
                        throwInvalidFulfillmentComponentData()
                    }
                }
            }
            // Write final amount to execution.
            mstore(add(mload(execution), Common_amount_offset), amount)
            // Determine whether the error buffer contains a nonzero error code.
            if errorBuffer {
                // If errorBuffer is 1, an item had an amount of zero.
                if eq(errorBuffer, 1) {
                    // Store left-padded selector with push4 (reduces bytecode)
                    // mem[28:32] = selector
                    mstore(0, MissingItemAmount_error_selector)
                    // revert(abi.encodeWithSignature("MissingItemAmount()"))
                    revert(
                        Error_selector_offset,
                        MissingItemAmount_error_length
                    )
                }
                // If errorBuffer is not 1 or 0, the sum overflowed.
                // Panic!
                throwOverflow()
            }
            // Declare function for reverts on invalid fulfillment data.
            function throwInvalidFulfillmentComponentData() {
                // Store left-padded selector (uses push4 and reduces code size)
                mstore(0, InvalidFulfillmentComponentData_error_selector)
                // revert(abi.encodeWithSignature(
                //     "InvalidFulfillmentComponentData()"
                // ))
                revert(
                    Error_selector_offset,
                    InvalidFulfillmentComponentData_error_length
                )
            }
            // Declare function for reverts due to arithmetic overflows.
            function throwOverflow() {
                // Store the Panic error signature.
                mstore(0, Panic_error_selector)
                // Store the arithmetic (0x11) panic code.
                mstore(Panic_error_code_ptr, Panic_arithmetic)
                // revert(abi.encodeWithSignature("Panic(uint256)", 0x11))
                revert(Error_selector_offset, Panic_error_length)
            }
        }
    }
    /**
     * @dev Internal pure function to aggregate a group of consideration items
     *      using supplied directives on which component items are candidates
     *      for aggregation, skipping items on orders that are not available.
     *      Note that this function depends on memory layout affected by an
     *      earlier call to _validateOrdersAndPrepareToFulfill. The memory for
     *      the consideration arrays needs to be updated before calling
     *      _aggregateValidFulfillmentConsiderationItems.
     *      _validateOrdersAndPrepareToFulfill is called in _matchAdvancedOrders
     *      and _fulfillAvailableAdvancedOrders in the current version.
     *
     * @param advancedOrders          The orders to aggregate consideration
     *                                items from.
     * @param considerationComponents An array of FulfillmentComponent structs
     *                                indicating the order index and item index
     *                                of each candidate consideration item for
     *                                aggregation.
     * @param execution               The execution to apply the aggregation to.
     * @param offerer                 The address of the offerer to set on the
     *                                execution.
     * @param conduitKey              A bytes32 value indicating the conduit key
     *                                to set on the execution.
     */
    function _aggregateValidFulfillmentConsiderationItems(
        AdvancedOrder[] memory advancedOrders,
        FulfillmentComponent[] memory considerationComponents,
        Execution memory execution,
        address offerer,
        bytes32 conduitKey
    ) internal pure {
        // Utilize assembly in order to efficiently aggregate the items.
        assembly {
            // Declare a variable for the final aggregated item amount.
            let amount
            // Create variable to track errors encountered with amount.
            let errorBuffer
            // Declare variable for hash(itemType, token, identifier, recipient)
            let dataHash
            // Iterate over each consideration component.
            for {
                // Track position in considerationComponents head.
                let fulfillmentHeadPtr := considerationComponents
                // Get position of the last element in head of array.
                let endPtr := add(
                    considerationComponents,
                    shl(OneWordShift, mload(considerationComponents))
                )
            } lt(fulfillmentHeadPtr, endPtr) {
            } {
                // Increment position in considerationComponents head.
                fulfillmentHeadPtr := add(fulfillmentHeadPtr, OneWord)
                // Retrieve the order index using the fulfillment pointer.
                let orderIndex := mload(mload(fulfillmentHeadPtr))
                // Ensure that the order index is not out of range.
                if iszero(lt(orderIndex, mload(advancedOrders))) {
                    throwInvalidFulfillmentComponentData()
                }
                // Read advancedOrders[orderIndex] pointer from its array head.
                let orderPtr := mload(
                    // Derive head position of advancedOrders[orderIndex].
                    add(
                        add(advancedOrders, OneWord),
                        shl(OneWordShift, orderIndex)
                    )
                )
                // Retrieve item index using an offset of fulfillment pointer.
                let itemIndex := mload(
                    add(mload(fulfillmentHeadPtr), Fulfillment_itemIndex_offset)
                )
                let considerationItemPtr
                {
                    // Load consideration array pointer.
                    let considerationArrPtr := mload(
                        add(
                            // Read OrderParameters pointer from the order.
                            mload(orderPtr),
                            OrderParameters_consideration_head_offset
                        )
                    )
                    // If the consideration item index is out of range or the
                    // numerator is zero, skip this item.
                    if or(
                        iszero(lt(itemIndex, mload(considerationArrPtr))),
                        iszero(
                            mload(add(orderPtr, AdvancedOrder_numerator_offset))
                        )
                    ) {
                        continue
                    }
                    // Retrieve consideration item pointer using the item index.
                    considerationItemPtr := mload(
                        add(
                            // Get pointer to beginning of receivedItem.
                            add(considerationArrPtr, OneWord),
                            // Calculate offset to pointer for the order.
                            shl(OneWordShift, itemIndex)
                        )
                    )
                }
                // Declare a separate scope for the amount update.
                {
                    // Retrieve amount pointer using consideration item pointer.
                    let amountPtr := add(
                        considerationItemPtr,
                        Common_amount_offset
                    )
                    // Add consideration item amount to execution amount.
                    let newAmount := add(amount, mload(amountPtr))
                    // Update error buffer:
                    // 1 = zero amount, 2 = overflow, 3 = both.
                    errorBuffer := or(
                        errorBuffer,
                        or(
                            shl(1, lt(newAmount, amount)),
                            iszero(mload(amountPtr))
                        )
                    )
                    // Update the amount to the new, summed amount.
                    amount := newAmount
                    // Zero out original item amount to indicate it is credited.
                    mstore(amountPtr, 0)
                }
                // Retrieve ReceivedItem pointer from Execution.
                let receivedItem := mload(execution)
                switch iszero(dataHash)
                case 1 {
                    // On first valid item, populate the received item in
                    // memory for later comparison.
                    // Set the item type on the received item.
                    mstore(receivedItem, mload(considerationItemPtr))
                    // Set the token on the received item.
                    mstore(
                        add(receivedItem, Common_token_offset),
                        mload(add(considerationItemPtr, Common_token_offset))
                    )
                    // Set the identifier on the received item.
                    mstore(
                        add(receivedItem, Common_identifier_offset),
                        mload(
                            add(considerationItemPtr, Common_identifier_offset)
                        )
                    )
                    // Set the recipient on the received item. Note that this
                    // depends on the memory layout established by the
                    // _validateOrdersAndPrepareToFulfill function.
                    mstore(
                        add(receivedItem, ReceivedItem_recipient_offset),
                        mload(
                            add(
                                considerationItemPtr,
                                ReceivedItem_recipient_offset
                            )
                        )
                    )
                    // Set provided offerer on the execution.
                    mstore(add(execution, Execution_offerer_offset), offerer)
                    // Set provided conduitKey on the execution.
                    mstore(add(execution, Execution_conduit_offset), conduitKey)
                    // Calculate the hash of (itemType, token, identifier,
                    // recipient). This is run after amount is set to zero, so
                    // there will be one blank word after identifier included in
                    // the hash buffer.
                    dataHash := keccak256(
                        considerationItemPtr,
                        ReceivedItem_size
                    )
                    // If component index > 0, swap component pointer with
                    // pointer to first component so that any remainder after
                    // fulfillment can be added back to the first item.
                    let firstFulfillmentHeadPtr := add(
                        considerationComponents,
                        OneWord
                    )
                    if xor(firstFulfillmentHeadPtr, fulfillmentHeadPtr) {
                        let fulfillmentPtr := mload(fulfillmentHeadPtr)
                        mstore(firstFulfillmentHeadPtr, fulfillmentPtr)
                    }
                }
                default {
                    // Compare every subsequent item to the first; the item
                    // type, token, identifier and recipient must match.
                    if xor(
                        dataHash,
                        // Calculate the hash of (itemType, token, identifier,
                        // recipient). This is run after amount is set to zero,
                        // so there will be one blank word after identifier
                        // included in the hash buffer.
                        keccak256(considerationItemPtr, ReceivedItem_size)
                    ) {
                        // Throw if any of the requirements are not met.
                        throwInvalidFulfillmentComponentData()
                    }
                }
            }
            // Retrieve ReceivedItem pointer from Execution.
            let receivedItem := mload(execution)
            // Write final amount to execution.
            mstore(add(receivedItem, Common_amount_offset), amount)
            // Determine whether the error buffer contains a nonzero error code.
            if errorBuffer {
                // If errorBuffer is 1, an item had an amount of zero.
                if eq(errorBuffer, 1) {
                    // Store left-padded selector with push4, mem[28:32]
                    mstore(0, MissingItemAmount_error_selector)
                    // revert(abi.encodeWithSignature("MissingItemAmount()"))
                    revert(
                        Error_selector_offset,
                        MissingItemAmount_error_length
                    )
                }
                // If errorBuffer is not 1 or 0, `amount` overflowed.
                // Panic!
                throwOverflow()
            }
            // Declare function for reverts on invalid fulfillment data.
            function throwInvalidFulfillmentComponentData() {
                // Store the InvalidFulfillmentComponentData error signature.
                mstore(0, InvalidFulfillmentComponentData_error_selector)
                // revert(abi.encodeWithSignature(
                //     "InvalidFulfillmentComponentData()"
                // ))
                revert(
                    Error_selector_offset,
                    InvalidFulfillmentComponentData_error_length
                )
            }
            // Declare function for reverts due to arithmetic overflows.
            function throwOverflow() {
                // Store the Panic error signature.
                mstore(0, Panic_error_selector)
                // Store the arithmetic (0x11) panic code.
                mstore(Panic_error_code_ptr, Panic_arithmetic)
                // revert(abi.encodeWithSignature("Panic(uint256)", 0x11))
                revert(Error_selector_offset, Panic_error_length)
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;
import { Side } from "./ConsiderationEnums.sol";
import {
    BadFraction_error_length,
    BadFraction_error_selector,
    CannotCancelOrder_error_length,
    CannotCancelOrder_error_selector,
    ConsiderationLengthNotEqualToTotalOriginal_error_length,
    ConsiderationLengthNotEqualToTotalOriginal_error_selector,
    ConsiderationNotMet_error_considerationIndex_ptr,
    ConsiderationNotMet_error_length,
    ConsiderationNotMet_error_orderIndex_ptr,
    ConsiderationNotMet_error_selector,
    ConsiderationNotMet_error_shortfallAmount_ptr,
    CriteriaNotEnabledForItem_error_length,
    CriteriaNotEnabledForItem_error_selector,
    Error_selector_offset,
    InsufficientNativeTokensSupplied_error_length,
    InsufficientNativeTokensSupplied_error_selector,
    InvalidBasicOrderParameterEncoding_error_length,
    InvalidBasicOrderParameterEncoding_error_selector,
    InvalidCallToConduit_error_conduit_ptr,
    InvalidCallToConduit_error_length,
    InvalidCallToConduit_error_selector,
    InvalidConduit_error_conduit_ptr,
    InvalidConduit_error_conduitKey_ptr,
    InvalidConduit_error_length,
    InvalidConduit_error_selector,
    InvalidContractOrder_error_length,
    InvalidContractOrder_error_orderHash_ptr,
    InvalidContractOrder_error_selector,
    InvalidERC721TransferAmount_error_amount_ptr,
    InvalidERC721TransferAmount_error_length,
    InvalidERC721TransferAmount_error_selector,
    InvalidMsgValue_error_length,
    InvalidMsgValue_error_selector,
    InvalidMsgValue_error_value_ptr,
    InvalidNativeOfferItem_error_length,
    InvalidNativeOfferItem_error_selector,
    InvalidProof_error_length,
    InvalidProof_error_selector,
    InvalidTime_error_endTime_ptr,
    InvalidTime_error_length,
    InvalidTime_error_selector,
    InvalidTime_error_startTime_ptr,
    MismatchedOfferAndConsiderationComponents_error_idx_ptr,
    MismatchedOfferAndConsiderationComponents_error_length,
    MismatchedOfferAndConsiderationComponents_error_selector,
    MissingFulfillmentComponentOnAggregation_error_length,
    MissingFulfillmentComponentOnAggregation_error_selector,
    MissingFulfillmentComponentOnAggregation_error_side_ptr,
    MissingOriginalConsiderationItems_error_length,
    MissingOriginalConsiderationItems_error_selector,
    NoReentrantCalls_error_length,
    NoReentrantCalls_error_selector,
    NoSpecifiedOrdersAvailable_error_length,
    NoSpecifiedOrdersAvailable_error_selector,
    OfferAndConsiderationRequiredOnFulfillment_error_length,
    OfferAndConsiderationRequiredOnFulfillment_error_selector,
    OrderAlreadyFilled_error_length,
    OrderAlreadyFilled_error_orderHash_ptr,
    OrderAlreadyFilled_error_selector,
    OrderCriteriaResolverOutOfRange_error_length,
    OrderCriteriaResolverOutOfRange_error_selector,
    OrderCriteriaResolverOutOfRange_error_side_ptr,
    OrderIsCancelled_error_length,
    OrderIsCancelled_error_orderHash_ptr,
    OrderIsCancelled_error_selector,
    OrderPartiallyFilled_error_length,
    OrderPartiallyFilled_error_orderHash_ptr,
    OrderPartiallyFilled_error_selector,
    PartialFillsNotEnabledForOrder_error_length,
    PartialFillsNotEnabledForOrder_error_selector,
    UnresolvedConsiderationCriteria_error_length,
    UnresolvedConsiderationCriteria_error_orderIndex_ptr,
    UnresolvedConsiderationCriteria_error_selector,
    UnresolvedOfferCriteria_error_length,
    UnresolvedOfferCriteria_error_offerIndex_ptr,
    UnresolvedOfferCriteria_error_orderIndex_ptr,
    UnresolvedOfferCriteria_error_selector,
    UnusedItemParameters_error_length,
    UnusedItemParameters_error_selector
} from "./ConsiderationErrorConstants.sol";
/**
 * @dev Reverts the current transaction with a "BadFraction" error message.
 */
function _revertBadFraction() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, BadFraction_error_selector)
        // revert(abi.encodeWithSignature("BadFraction()"))
        revert(Error_selector_offset, BadFraction_error_length)
    }
}
/**
 * @dev Reverts the current transaction with a "ConsiderationNotMet" error
 *      message, including the provided order index, consideration index, and
 *      shortfall amount.
 *
 * @param orderIndex         The index of the order that did not meet the
 *                           consideration criteria.
 * @param considerationIndex The index of the consideration item that did not
 *                           meet its criteria.
 * @param shortfallAmount    The amount by which the consideration criteria were
 *                           not met.
 */
function _revertConsiderationNotMet(
    uint256 orderIndex,
    uint256 considerationIndex,
    uint256 shortfallAmount
) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, ConsiderationNotMet_error_selector)
        // Store arguments.
        mstore(ConsiderationNotMet_error_orderIndex_ptr, orderIndex)
        mstore(
            ConsiderationNotMet_error_considerationIndex_ptr, considerationIndex
        )
        mstore(ConsiderationNotMet_error_shortfallAmount_ptr, shortfallAmount)
        // revert(abi.encodeWithSignature(
        //     "ConsiderationNotMet(uint256,uint256,uint256)",
        //     orderIndex,
        //     considerationIndex,
        //     shortfallAmount
        // ))
        revert(Error_selector_offset, ConsiderationNotMet_error_length)
    }
}
/**
 * @dev Reverts the current transaction with a "CriteriaNotEnabledForItem" error
 *      message.
 */
function _revertCriteriaNotEnabledForItem() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, CriteriaNotEnabledForItem_error_selector)
        // revert(abi.encodeWithSignature("CriteriaNotEnabledForItem()"))
        revert(Error_selector_offset, CriteriaNotEnabledForItem_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an
 *      "InsufficientNativeTokensSupplied" error message.
 */
function _revertInsufficientNativeTokensSupplied() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InsufficientNativeTokensSupplied_error_selector)
        // revert(abi.encodeWithSignature("InsufficientNativeTokensSupplied()"))
        revert(
            Error_selector_offset, InsufficientNativeTokensSupplied_error_length
        )
    }
}
/**
 * @dev Reverts the current transaction with an
 *      "InvalidBasicOrderParameterEncoding" error message.
 */
function _revertInvalidBasicOrderParameterEncoding() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidBasicOrderParameterEncoding_error_selector)
        // revert(abi.encodeWithSignature(
        //     "InvalidBasicOrderParameterEncoding()"
        // ))
        revert(
            Error_selector_offset,
            InvalidBasicOrderParameterEncoding_error_length
        )
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidCallToConduit" error
 *      message, including the provided address of the conduit that was called
 *      improperly.
 *
 * @param conduit The address of the conduit that was called improperly.
 */
function _revertInvalidCallToConduit(address conduit) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidCallToConduit_error_selector)
        // Store argument.
        mstore(InvalidCallToConduit_error_conduit_ptr, conduit)
        // revert(abi.encodeWithSignature(
        //     "InvalidCallToConduit(address)",
        //     conduit
        // ))
        revert(Error_selector_offset, InvalidCallToConduit_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "CannotCancelOrder" error
 *      message.
 */
function _revertCannotCancelOrder() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, CannotCancelOrder_error_selector)
        // revert(abi.encodeWithSignature("CannotCancelOrder()"))
        revert(Error_selector_offset, CannotCancelOrder_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidConduit" error message,
 *      including the provided key and address of the invalid conduit.
 *
 * @param conduitKey    The key of the invalid conduit.
 * @param conduit       The address of the invalid conduit.
 */
function _revertInvalidConduit(bytes32 conduitKey, address conduit) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidConduit_error_selector)
        // Store arguments.
        mstore(InvalidConduit_error_conduitKey_ptr, conduitKey)
        mstore(InvalidConduit_error_conduit_ptr, conduit)
        // revert(abi.encodeWithSignature(
        //     "InvalidConduit(bytes32,address)",
        //     conduitKey,
        //     conduit
        // ))
        revert(Error_selector_offset, InvalidConduit_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidERC721TransferAmount"
 *      error message.
 *
 * @param amount The invalid amount.
 */
function _revertInvalidERC721TransferAmount(uint256 amount) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidERC721TransferAmount_error_selector)
        // Store argument.
        mstore(InvalidERC721TransferAmount_error_amount_ptr, amount)
        // revert(abi.encodeWithSignature(
        //     "InvalidERC721TransferAmount(uint256)",
        //     amount
        // ))
        revert(Error_selector_offset, InvalidERC721TransferAmount_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidMsgValue" error message,
 *      including the invalid value that was sent in the transaction's
 *      `msg.value` field.
 *
 * @param value The invalid value that was sent in the transaction's `msg.value`
 *              field.
 */
function _revertInvalidMsgValue(uint256 value) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidMsgValue_error_selector)
        // Store argument.
        mstore(InvalidMsgValue_error_value_ptr, value)
        // revert(abi.encodeWithSignature("InvalidMsgValue(uint256)", value))
        revert(Error_selector_offset, InvalidMsgValue_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidNativeOfferItem" error
 *      message.
 */
function _revertInvalidNativeOfferItem() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidNativeOfferItem_error_selector)
        // revert(abi.encodeWithSignature("InvalidNativeOfferItem()"))
        revert(Error_selector_offset, InvalidNativeOfferItem_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidProof" error message.
 */
function _revertInvalidProof() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidProof_error_selector)
        // revert(abi.encodeWithSignature("InvalidProof()"))
        revert(Error_selector_offset, InvalidProof_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidContractOrder" error
 *      message.
 *
 * @param orderHash The hash of the contract order that caused the error.
 */
function _revertInvalidContractOrder(bytes32 orderHash) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidContractOrder_error_selector)
        // Store arguments.
        mstore(InvalidContractOrder_error_orderHash_ptr, orderHash)
        // revert(abi.encodeWithSignature(
        //     "InvalidContractOrder(bytes32)",
        //     orderHash
        // ))
        revert(Error_selector_offset, InvalidContractOrder_error_length)
    }
}
/**
 * @dev Reverts the current transaction with an "InvalidTime" error message.
 *
 * @param startTime       The time at which the order becomes active.
 * @param endTime         The time at which the order becomes inactive.
 */
function _revertInvalidTime(uint256 startTime, uint256 endTime) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, InvalidTime_error_selector)
        // Store arguments.
        mstore(InvalidTime_error_startTime_ptr, startTime)
        mstore(InvalidTime_error_endTime_ptr, endTime)
        // revert(abi.encodeWithSignature(
        //     "InvalidTime(uint256,uint256)",
        //     startTime,
        //     endTime
        // ))
        revert(Error_selector_offset, InvalidTime_error_length)
    }
}
/**
 * @dev Reverts execution with a "MissingFulfillmentComponentOnAggregation"
 *       error message.
 *
 * @param side The side of the fulfillment component that is missing (0 for
 *             offer, 1 for consideration).
 *
 */
function _revertMissingFulfillmentComponentOnAggregation(Side side) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, MissingFulfillmentComponentOnAggregation_error_selector)
        // Store argument.
        mstore(MissingFulfillmentComponentOnAggregation_error_side_ptr, side)
        // revert(abi.encodeWithSignature(
        //     "MissingFulfillmentComponentOnAggregation(uint8)",
        //     side
        // ))
        revert(
            Error_selector_offset,
            MissingFulfillmentComponentOnAggregation_error_length
        )
    }
}
/**
 * @dev Reverts execution with a "MissingOriginalConsiderationItems" error
 *      message.
 */
function _revertMissingOriginalConsiderationItems() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, MissingOriginalConsiderationItems_error_selector)
        // revert(abi.encodeWithSignature(
        //     "MissingOriginalConsiderationItems()"
        // ))
        revert(
            Error_selector_offset,
            MissingOriginalConsiderationItems_error_length
        )
    }
}
/**
 * @dev Reverts execution with a "NoReentrantCalls" error message.
 */
function _revertNoReentrantCalls() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, NoReentrantCalls_error_selector)
        // revert(abi.encodeWithSignature("NoReentrantCalls()"))
        revert(Error_selector_offset, NoReentrantCalls_error_length)
    }
}
/**
 * @dev Reverts execution with a "NoSpecifiedOrdersAvailable" error message.
 */
function _revertNoSpecifiedOrdersAvailable() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, NoSpecifiedOrdersAvailable_error_selector)
        // revert(abi.encodeWithSignature("NoSpecifiedOrdersAvailable()"))
        revert(Error_selector_offset, NoSpecifiedOrdersAvailable_error_length)
    }
}
/**
 * @dev Reverts execution with an "OrderAlreadyFilled" error message.
 *
 * @param orderHash The hash of the order that has already been filled.
 */
function _revertOrderAlreadyFilled(bytes32 orderHash) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, OrderAlreadyFilled_error_selector)
        // Store argument.
        mstore(OrderAlreadyFilled_error_orderHash_ptr, orderHash)
        // revert(abi.encodeWithSignature(
        //     "OrderAlreadyFilled(bytes32)",
        //     orderHash
        // ))
        revert(Error_selector_offset, OrderAlreadyFilled_error_length)
    }
}
/**
 * @dev Reverts execution with an "OrderCriteriaResolverOutOfRange" error
 *      message.
 *
 * @param side The side of the criteria that is missing (0 for offer, 1 for
 *             consideration).
 *
 */
function _revertOrderCriteriaResolverOutOfRange(Side side) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, OrderCriteriaResolverOutOfRange_error_selector)
        // Store argument.
        mstore(OrderCriteriaResolverOutOfRange_error_side_ptr, side)
        // revert(abi.encodeWithSignature(
        //     "OrderCriteriaResolverOutOfRange(uint8)",
        //     side
        // ))
        revert(
            Error_selector_offset, OrderCriteriaResolverOutOfRange_error_length
        )
    }
}
/**
 * @dev Reverts execution with an "OrderIsCancelled" error message.
 *
 * @param orderHash The hash of the order that has already been cancelled.
 */
function _revertOrderIsCancelled(bytes32 orderHash) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, OrderIsCancelled_error_selector)
        // Store argument.
        mstore(OrderIsCancelled_error_orderHash_ptr, orderHash)
        // revert(abi.encodeWithSignature(
        //     "OrderIsCancelled(bytes32)",
        //     orderHash
        // ))
        revert(Error_selector_offset, OrderIsCancelled_error_length)
    }
}
/**
 * @dev Reverts execution with an "OrderPartiallyFilled" error message.
 *
 * @param orderHash The hash of the order that has already been partially
 *                  filled.
 */
function _revertOrderPartiallyFilled(bytes32 orderHash) pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, OrderPartiallyFilled_error_selector)
        // Store argument.
        mstore(OrderPartiallyFilled_error_orderHash_ptr, orderHash)
        // revert(abi.encodeWithSignature(
        //     "OrderPartiallyFilled(bytes32)",
        //     orderHash
        // ))
        revert(Error_selector_offset, OrderPartiallyFilled_error_length)
    }
}
/**
 * @dev Reverts execution with a "PartialFillsNotEnabledForOrder" error message.
 */
function _revertPartialFillsNotEnabledForOrder() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, PartialFillsNotEnabledForOrder_error_selector)
        // revert(abi.encodeWithSignature("PartialFillsNotEnabledForOrder()"))
        revert(
            Error_selector_offset, PartialFillsNotEnabledForOrder_error_length
        )
    }
}
/**
 * @dev Reverts execution with an "UnusedItemParameters" error message.
 */
function _revertUnusedItemParameters() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, UnusedItemParameters_error_selector)
        // revert(abi.encodeWithSignature("UnusedItemParameters()"))
        revert(Error_selector_offset, UnusedItemParameters_error_length)
    }
}
/**
 * @dev Reverts execution with a "ConsiderationLengthNotEqualToTotalOriginal"
 *      error message.
 */
function _revertConsiderationLengthNotEqualToTotalOriginal() pure {
    assembly {
        // Store left-padded selector with push4 (reduces bytecode),
        // mem[28:32] = selector
        mstore(0, ConsiderationLengthNotEqualToTotalOriginal_error_selector)
        // revert(abi.encodeWithSignature(
        //     "ConsiderationLengthNotEqualToTotalOriginal()"
        // ))
        revert(
            Error_selector_offset,
            ConsiderationLengthNotEqualToTotalOriginal_error_length
        )
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
uint256 constant Error_selector_offset = 0x1c;
/*
 *  error MissingFulfillmentComponentOnAggregation(uint8 side)
 *    - Defined in FulfillmentApplicationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: side
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant MissingFulfillmentComponentOnAggregation_error_selector = (
    0x375c24c1
);
uint256 constant MissingFulfillmentComponentOnAggregation_error_side_ptr = 0x20;
uint256 constant MissingFulfillmentComponentOnAggregation_error_length = 0x24;
/*
 *  error OfferAndConsiderationRequiredOnFulfillment()
 *    - Defined in FulfillmentApplicationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant OfferAndConsiderationRequiredOnFulfillment_error_selector = (
    0x98e9db6e
);
uint256 constant OfferAndConsiderationRequiredOnFulfillment_error_length = 0x04;
/*
 *  error MismatchedFulfillmentOfferAndConsiderationComponents(
 *      uint256 fulfillmentIndex
 *  )
 *    - Defined in FulfillmentApplicationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: fulfillmentIndex
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant MismatchedOfferAndConsiderationComponents_error_selector = (
    0xbced929d
);
uint256 constant MismatchedOfferAndConsiderationComponents_error_idx_ptr = 0x20;
uint256 constant MismatchedOfferAndConsiderationComponents_error_length = 0x24;
/*
 *  error InvalidFulfillmentComponentData()
 *    - Defined in FulfillmentApplicationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InvalidFulfillmentComponentData_error_selector = 0x7fda7279;
uint256 constant InvalidFulfillmentComponentData_error_length = 0x04;
/*
 *  error InexactFraction()
 *    - Defined in AmountDerivationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InexactFraction_error_selector = 0xc63cf089;
uint256 constant InexactFraction_error_length = 0x04;
/*
 *  error OrderCriteriaResolverOutOfRange(uint8 side)
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: side
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant OrderCriteriaResolverOutOfRange_error_selector = 0x133c37c6;
uint256 constant OrderCriteriaResolverOutOfRange_error_side_ptr = 0x20;
uint256 constant OrderCriteriaResolverOutOfRange_error_length = 0x24;
/*
 *  error UnresolvedOfferCriteria(uint256 orderIndex, uint256 offerIndex)
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderIndex
 *    - 0x40: offerIndex
 * Revert buffer is memory[0x1c:0x60]
 */
uint256 constant UnresolvedOfferCriteria_error_selector = 0xd6929332;
uint256 constant UnresolvedOfferCriteria_error_orderIndex_ptr = 0x20;
uint256 constant UnresolvedOfferCriteria_error_offerIndex_ptr = 0x40;
uint256 constant UnresolvedOfferCriteria_error_length = 0x44;
/*
 *  error UnresolvedConsiderationCriteria(
 *      uint256 orderIndex,
 *      uint256 considerationIndex
 *  )
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderIndex
 *    - 0x40: considerationIndex
 * Revert buffer is memory[0x1c:0x60]
 */
uint256 constant UnresolvedConsiderationCriteria_error_selector = 0xa8930e9a;
uint256 constant UnresolvedConsiderationCriteria_error_orderIndex_ptr = 0x20;
uint256 constant UnresolvedConsiderationCriteria_error_itemIndex_ptr = 0x40;
uint256 constant UnresolvedConsiderationCriteria_error_length = 0x44;
/*
 *  error OfferCriteriaResolverOutOfRange()
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant OfferCriteriaResolverOutOfRange_error_selector = 0xbfb3f8ce;
// uint256 constant OfferCriteriaResolverOutOfRange_error_length = 0x04;
/*
 *  error ConsiderationCriteriaResolverOutOfRange()
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant ConsiderationCriteriaResolverOutOfRange_error_selector = (
    0x6088d7de
);
uint256 constant ConsiderationCriteriaResolverOutOfRange_err_selector = (
    0x6088d7de
);
// uint256 constant ConsiderationCriteriaResolverOutOfRange_error_length = 0x04;
/*
 *  error CriteriaNotEnabledForItem()
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant CriteriaNotEnabledForItem_error_selector = 0x94eb6af6;
uint256 constant CriteriaNotEnabledForItem_error_length = 0x04;
/*
 *  error InvalidProof()
 *    - Defined in CriteriaResolutionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InvalidProof_error_selector = 0x09bde339;
uint256 constant InvalidProof_error_length = 0x04;
/*
 *  error InvalidRestrictedOrder(bytes32 orderHash)
 *    - Defined in ZoneInteractionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderHash
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant InvalidRestrictedOrder_error_selector = 0xfb5014fc;
uint256 constant InvalidRestrictedOrder_error_orderHash_ptr = 0x20;
uint256 constant InvalidRestrictedOrder_error_length = 0x24;
/*
 *  error InvalidContractOrder(bytes32 orderHash)
 *    - Defined in ZoneInteractionErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderHash
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant InvalidContractOrder_error_selector = 0x93979285;
uint256 constant InvalidContractOrder_error_orderHash_ptr = 0x20;
uint256 constant InvalidContractOrder_error_length = 0x24;
/*
 *  error BadSignatureV(uint8 v)
 *    - Defined in SignatureVerificationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: v
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant BadSignatureV_error_selector = 0x1f003d0a;
uint256 constant BadSignatureV_error_v_ptr = 0x20;
uint256 constant BadSignatureV_error_length = 0x24;
/*
 *  error InvalidSigner()
 *    - Defined in SignatureVerificationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InvalidSigner_error_selector = 0x815e1d64;
uint256 constant InvalidSigner_error_length = 0x04;
/*
 *  error InvalidSignature()
 *    - Defined in SignatureVerificationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InvalidSignature_error_selector = 0x8baa579f;
uint256 constant InvalidSignature_error_length = 0x04;
/*
 *  error BadContractSignature()
 *    - Defined in SignatureVerificationErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant BadContractSignature_error_selector = 0x4f7fb80d;
uint256 constant BadContractSignature_error_length = 0x04;
/*
 *  error InvalidERC721TransferAmount(uint256 amount)
 *    - Defined in TokenTransferrerErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: amount
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant InvalidERC721TransferAmount_error_selector = 0x69f95827;
uint256 constant InvalidERC721TransferAmount_error_amount_ptr = 0x20;
uint256 constant InvalidERC721TransferAmount_error_length = 0x24;
/*
 *  error MissingItemAmount()
 *    - Defined in TokenTransferrerErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant MissingItemAmount_error_selector = 0x91b3e514;
uint256 constant MissingItemAmount_error_length = 0x04;
/*
 *  error UnusedItemParameters()
 *    - Defined in TokenTransferrerErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant UnusedItemParameters_error_selector = 0x6ab37ce7;
uint256 constant UnusedItemParameters_error_length = 0x04;
/*
 *  error NoReentrantCalls()
 *    - Defined in ReentrancyErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant NoReentrantCalls_error_selector = 0x7fa8a987;
uint256 constant NoReentrantCalls_error_length = 0x04;
/*
 *  error OrderAlreadyFilled(bytes32 orderHash)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderHash
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant OrderAlreadyFilled_error_selector = 0x10fda3e1;
uint256 constant OrderAlreadyFilled_error_orderHash_ptr = 0x20;
uint256 constant OrderAlreadyFilled_error_length = 0x24;
/*
 *  error InvalidTime(uint256 startTime, uint256 endTime)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: startTime
 *    - 0x40: endTime
 * Revert buffer is memory[0x1c:0x60]
 */
uint256 constant InvalidTime_error_selector = 0x21ccfeb7;
uint256 constant InvalidTime_error_startTime_ptr = 0x20;
uint256 constant InvalidTime_error_endTime_ptr = 0x40;
uint256 constant InvalidTime_error_length = 0x44;
/*
 *  error InvalidConduit(bytes32 conduitKey, address conduit)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: conduitKey
 *    - 0x40: conduit
 * Revert buffer is memory[0x1c:0x60]
 */
uint256 constant InvalidConduit_error_selector = 0x1cf99b26;
uint256 constant InvalidConduit_error_conduitKey_ptr = 0x20;
uint256 constant InvalidConduit_error_conduit_ptr = 0x40;
uint256 constant InvalidConduit_error_length = 0x44;
/*
 *  error MissingOriginalConsiderationItems()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant MissingOriginalConsiderationItems_error_selector = 0x466aa616;
uint256 constant MissingOriginalConsiderationItems_error_length = 0x04;
/*
 *  error InvalidCallToConduit(address conduit)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: conduit
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant InvalidCallToConduit_error_selector = 0xd13d53d4;
uint256 constant InvalidCallToConduit_error_conduit_ptr = 0x20;
uint256 constant InvalidCallToConduit_error_length = 0x24;
/*
 *  error ConsiderationNotMet(
 *      uint256 orderIndex,
 *      uint256 considerationIndex,
 *      uint256 shortfallAmount
 *  )
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderIndex
 *    - 0x40: considerationIndex
 *    - 0x60: shortfallAmount
 * Revert buffer is memory[0x1c:0x80]
 */
uint256 constant ConsiderationNotMet_error_selector = 0xa5f54208;
uint256 constant ConsiderationNotMet_error_orderIndex_ptr = 0x20;
uint256 constant ConsiderationNotMet_error_considerationIndex_ptr = 0x40;
uint256 constant ConsiderationNotMet_error_shortfallAmount_ptr = 0x60;
uint256 constant ConsiderationNotMet_error_length = 0x64;
/*
 *  error InsufficientNativeTokensSupplied()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InsufficientNativeTokensSupplied_error_selector = 0x8ffff980;
uint256 constant InsufficientNativeTokensSupplied_error_length = 0x04;
/*
 *  error NativeTokenTransferGenericFailure(address account, uint256 amount)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: account
 *    - 0x40: amount
 * Revert buffer is memory[0x1c:0x60]
 */
uint256 constant NativeTokenTransferGenericFailure_error_selector = 0xbc806b96;
uint256 constant NativeTokenTransferGenericFailure_error_account_ptr = 0x20;
uint256 constant NativeTokenTransferGenericFailure_error_amount_ptr = 0x40;
uint256 constant NativeTokenTransferGenericFailure_error_length = 0x44;
/*
 *  error PartialFillsNotEnabledForOrder()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant PartialFillsNotEnabledForOrder_error_selector = 0xa11b63ff;
uint256 constant PartialFillsNotEnabledForOrder_error_length = 0x04;
/*
 *  error OrderIsCancelled(bytes32 orderHash)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderHash
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant OrderIsCancelled_error_selector = 0x1a515574;
uint256 constant OrderIsCancelled_error_orderHash_ptr = 0x20;
uint256 constant OrderIsCancelled_error_length = 0x24;
/*
 *  error OrderPartiallyFilled(bytes32 orderHash)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: orderHash
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant OrderPartiallyFilled_error_selector = 0xee9e0e63;
uint256 constant OrderPartiallyFilled_error_orderHash_ptr = 0x20;
uint256 constant OrderPartiallyFilled_error_length = 0x24;
/*
 *  error CannotCancelOrder()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant CannotCancelOrder_error_selector = 0xfed398fc;
uint256 constant CannotCancelOrder_error_length = 0x04;
/*
 *  error BadFraction()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant BadFraction_error_selector = 0x5a052b32;
uint256 constant BadFraction_error_length = 0x04;
/*
 *  error InvalidMsgValue(uint256 value)
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: value
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant InvalidMsgValue_error_selector = 0xa61be9f0;
uint256 constant InvalidMsgValue_error_value_ptr = 0x20;
uint256 constant InvalidMsgValue_error_length = 0x24;
/*
 *  error InvalidBasicOrderParameterEncoding()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InvalidBasicOrderParameterEncoding_error_selector = 0x39f3e3fd;
uint256 constant InvalidBasicOrderParameterEncoding_error_length = 0x04;
/*
 *  error NoSpecifiedOrdersAvailable()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant NoSpecifiedOrdersAvailable_error_selector = 0xd5da9a1b;
uint256 constant NoSpecifiedOrdersAvailable_error_length = 0x04;
/*
 *  error InvalidNativeOfferItem()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant InvalidNativeOfferItem_error_selector = 0x12d3f5a3;
uint256 constant InvalidNativeOfferItem_error_length = 0x04;
/*
 *  error ConsiderationLengthNotEqualToTotalOriginal()
 *    - Defined in ConsiderationEventsAndErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 * Revert buffer is memory[0x1c:0x20]
 */
uint256 constant ConsiderationLengthNotEqualToTotalOriginal_error_selector = (
    0x2165628a
);
uint256 constant ConsiderationLengthNotEqualToTotalOriginal_error_length = 0x04;
/*
 *  error Panic(uint256 code)
 *    - Built-in Solidity error
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: code
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant Panic_error_selector = 0x4e487b71;
uint256 constant Panic_error_code_ptr = 0x20;
uint256 constant Panic_error_length = 0x24;
uint256 constant Panic_arithmetic = 0x11;
// uint256 constant Panic_resource = 0x41;
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    BasicOrderRouteType,
    ItemType,
    OrderType
} from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    BasicOrderParameters,
    OrderStatus
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import { OrderValidator } from "./OrderValidator.sol";
import {
    _revertInsufficientNativeTokensSupplied,
    _revertInvalidMsgValue,
    _revertInvalidERC721TransferAmount,
    _revertUnusedItemParameters
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    AccumulatorDisarmed,
    AdditionalRecipient_size_shift,
    AdditionalRecipient_size,
    BasicOrder_additionalRecipients_data_cdPtr,
    BasicOrder_addlRecipients_length_cdPtr,
    BasicOrder_basicOrderType_cdPtr,
    BasicOrder_common_params_size,
    BasicOrder_considerationAmount_cdPtr,
    BasicOrder_considerationHashesArray_ptr,
    BasicOrder_considerationIdentifier_cdPtr,
    BasicOrder_considerationItem_endAmount_ptr,
    BasicOrder_considerationItem_identifier_ptr,
    BasicOrder_considerationItem_itemType_ptr,
    BasicOrder_considerationItem_startAmount_ptr,
    BasicOrder_considerationItem_token_ptr,
    BasicOrder_considerationItem_typeHash_ptr,
    BasicOrder_considerationToken_cdPtr,
    BasicOrder_endTime_cdPtr,
    BasicOrder_fulfillerConduit_cdPtr,
    BasicOrder_offerAmount_cdPtr,
    BasicOrder_offeredItemByteMap,
    BasicOrder_offerer_cdPtr,
    BasicOrder_offererConduit_cdPtr,
    BasicOrder_offerIdentifier_cdPtr,
    BasicOrder_offerItem_endAmount_ptr,
    BasicOrder_offerItem_itemType_ptr,
    BasicOrder_offerItem_token_ptr,
    BasicOrder_offerItem_typeHash_ptr,
    BasicOrder_offerToken_cdPtr,
    BasicOrder_order_considerationHashes_ptr,
    BasicOrder_order_counter_ptr,
    BasicOrder_order_offerer_ptr,
    BasicOrder_order_offerHashes_ptr,
    BasicOrder_order_orderType_ptr,
    BasicOrder_order_startTime_ptr,
    BasicOrder_order_typeHash_ptr,
    BasicOrder_receivedItemByteMap,
    BasicOrder_startTime_cdPtr,
    BasicOrder_totalOriginalAdditionalRecipients_cdPtr,
    BasicOrder_zone_cdPtr,
    Common_token_offset,
    Conduit_execute_ConduitTransfer_length_ptr,
    Conduit_execute_ConduitTransfer_length,
    Conduit_execute_ConduitTransfer_offset_ptr,
    Conduit_execute_ConduitTransfer_ptr,
    Conduit_execute_signature,
    Conduit_execute_transferAmount_ptr,
    Conduit_execute_transferIdentifier_ptr,
    Conduit_execute_transferFrom_ptr,
    Conduit_execute_transferItemType_ptr,
    Conduit_execute_transferTo_ptr,
    Conduit_execute_transferToken_ptr,
    EIP712_ConsiderationItem_size,
    EIP712_OfferItem_size,
    EIP712_Order_size,
    FiveWords,
    FourWords,
    FreeMemoryPointerSlot,
    MaskOverLastTwentyBytes,
    OneConduitExecute_size,
    OneWord,
    OneWordShift,
    OrderFulfilled_baseOffset,
    OrderFulfilled_baseSize,
    OrderFulfilled_consideration_body_offset,
    OrderFulfilled_consideration_head_offset,
    OrderFulfilled_consideration_length_baseOffset,
    OrderFulfilled_fulfiller_offset,
    OrderFulfilled_offer_body_offset,
    OrderFulfilled_offer_head_offset,
    OrderFulfilled_offer_length_baseOffset,
    OrderFulfilled_offer_length_offset_relativeTo_baseOffset,
    OrderFulfilled_offer_itemType_offset_relativeTo_baseOffset,
    OrderFulfilled_offer_token_offset_relativeTo_baseOffset,
    OrderFulfilled_post_memory_region_reservedBytes,
    OrderFulfilled_selector,
    ReceivedItem_amount_offset,
    ReceivedItem_size,
    receivedItemsHash_ptr,
    ThreeWords,
    TwoWords,
    ZeroSlot
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    Error_selector_offset,
    InvalidBasicOrderParameterEncoding_error_length,
    InvalidBasicOrderParameterEncoding_error_selector,
    InvalidTime_error_endTime_ptr,
    InvalidTime_error_length,
    InvalidTime_error_selector,
    InvalidTime_error_startTime_ptr,
    MissingOriginalConsiderationItems_error_length,
    MissingOriginalConsiderationItems_error_selector,
    UnusedItemParameters_error_length,
    UnusedItemParameters_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
import {
    CalldataPointer
} from "seaport-types/src/helpers/PointerLibraries.sol";
/**
 * @title BasicOrderFulfiller
 * @author 0age
 * @notice BasicOrderFulfiller contains functionality for fulfilling "basic"
 *         orders with minimal overhead. See documentation for details on what
 *         qualifies as a basic order.
 */
contract BasicOrderFulfiller is OrderValidator {
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) OrderValidator(conduitController) {}
    /**
     * @dev Internal function to fulfill an order offering an ERC20, ERC721, or
     *      ERC1155 item by supplying Ether (or other native tokens), ERC20
     *      tokens, an ERC721 item, or an ERC1155 item as consideration. Six
     *      permutations are supported: Native token to ERC721, Native token to
     *      ERC1155, ERC20 to ERC721, ERC20 to ERC1155, ERC721 to ERC20, and
     *      ERC1155 to ERC20 (with native tokens supplied as msg.value). For an
     *      order to be eligible for fulfillment via this method, it must
     *      contain a single offer item (though that item may have a greater
     *      amount if the item is not an ERC721). An arbitrary number of
     *      "additional recipients" may also be supplied which will each receive
     *      native tokens or ERC20 items from the fulfiller as consideration.
     *      Refer to the documentation for a more comprehensive summary of how
     *      to utilize this method and what orders are compatible with it.
     *
     * @return A boolean indicating whether the order has been fulfilled.
     */
    function _validateAndFulfillBasicOrder() internal returns (bool) {
        // Declare enums for order type & route to extract from basicOrderType.
        BasicOrderRouteType route;
        OrderType orderType;
        // Declare additional recipient item type to derive from the route type.
        ItemType additionalRecipientsItemType;
        bytes32 orderHash;
        // Utilize assembly to extract the order type and the basic order route.
        assembly {
            // Read basicOrderType from calldata.
            let basicOrderType := calldataload(BasicOrder_basicOrderType_cdPtr)
            // Mask all but 2 least-significant bits to derive the order type.
            orderType := and(basicOrderType, 3)
            // Divide basicOrderType by four to derive the route.
            route := shr(2, basicOrderType)
            // If route > 1 additionalRecipient items are ERC20 (1) else native
            // token (0).
            additionalRecipientsItemType := gt(route, 1)
        }
        {
            // Declare temporary variable for enforcing payable status.
            bool correctPayableStatus;
            // Utilize assembly to compare the route to the callvalue.
            assembly {
                // route 0 and 1 are payable, otherwise route is not payable.
                correctPayableStatus := eq(
                    additionalRecipientsItemType,
                    iszero(callvalue())
                )
            }
            // Revert if msg.value has not been supplied as part of payable
            // routes or has been supplied as part of non-payable routes.
            if (!correctPayableStatus) {
                _revertInvalidMsgValue(msg.value);
            }
        }
        // Declare more arguments that will be derived from route and calldata.
        address additionalRecipientsToken;
        ItemType offeredItemType;
        bool offerTypeIsAdditionalRecipientsType;
        uint256 callDataPointer;
        // Declare scope for received item type to manage stack pressure.
        {
            ItemType receivedItemType;
            // Utilize assembly to retrieve function arguments and cast types.
            assembly {
                // Check if offered item type == additional recipient item type.
                offerTypeIsAdditionalRecipientsType := gt(route, 3)
                // If route > 3 additionalRecipientsToken is at 0xc4 else 0x24.
                additionalRecipientsToken := calldataload(
                    add(
                        BasicOrder_considerationToken_cdPtr,
                        mul(
                            offerTypeIsAdditionalRecipientsType,
                            BasicOrder_common_params_size
                        )
                    )
                )
                // If route > 2, receivedItemType is route - 2. If route is 2,
                // the receivedItemType is ERC20 (1). Otherwise, it is native
                // token (0).
                receivedItemType := byte(route, BasicOrder_receivedItemByteMap)
                // If route > 3, offeredItemType is ERC20 (1). Route is 2 or 3,
                // offeredItemType = route. Route is 0 or 1, it is route + 2.
                offeredItemType := byte(route, BasicOrder_offeredItemByteMap)
            }
            // Derive & validate order using parameters and update order status.
            (orderHash, callDataPointer) = _prepareBasicFulfillmentFromCalldata(
                orderType,
                receivedItemType,
                additionalRecipientsItemType,
                additionalRecipientsToken,
                offeredItemType
            );
        }
        // Declare conduitKey argument used by transfer functions.
        bytes32 conduitKey;
        // Utilize assembly to derive conduit (if relevant) based on route.
        assembly {
            // use offerer conduit for routes 0-3, fulfiller conduit otherwise.
            conduitKey := calldataload(
                add(
                    BasicOrder_offererConduit_cdPtr,
                    shl(OneWordShift, offerTypeIsAdditionalRecipientsType)
                )
            )
        }
        // Transfer tokens based on the route.
        if (additionalRecipientsItemType == ItemType.NATIVE) {
            // Ensure neither consideration token nor identifier are set. Note
            // that dirty upper bits in the consideration token will still cause
            // this error to be thrown.
            assembly {
                if or(
                    calldataload(BasicOrder_considerationToken_cdPtr),
                    calldataload(BasicOrder_considerationIdentifier_cdPtr)
                ) {
                    // Store left-padded selector with push4 (reduces bytecode),
                    // mem[28:32] = selector
                    mstore(0, UnusedItemParameters_error_selector)
                    // revert(abi.encodeWithSignature("UnusedItemParameters()"))
                    revert(
                        Error_selector_offset,
                        UnusedItemParameters_error_length
                    )
                }
            }
            // Transfer the ERC721 or ERC1155 item, bypassing the accumulator.
            _transferIndividual721Or1155Item(offeredItemType, conduitKey);
            // Transfer native to recipients, return excess to caller & wrap up.
            _transferNativeTokensAndFinalize();
        } else {
            // Initialize an accumulator array. From this point forward, no new
            // memory regions can be safely allocated until the accumulator is
            // no longer being utilized, as the accumulator operates in an
            // open-ended fashion from this memory pointer; existing memory may
            // still be accessed and modified, however.
            bytes memory accumulator = new bytes(AccumulatorDisarmed);
            // Choose transfer method for ERC721 or ERC1155 item based on route.
            if (route == BasicOrderRouteType.ERC20_TO_ERC721) {
                // Transfer ERC721 to caller using offerer's conduit preference.
                _transferERC721(
                    CalldataPointer
                        .wrap(BasicOrder_offerToken_cdPtr)
                        .readAddress(),
                    CalldataPointer
                        .wrap(BasicOrder_offerer_cdPtr)
                        .readAddress(),
                    msg.sender,
                    CalldataPointer
                        .wrap(BasicOrder_offerIdentifier_cdPtr)
                        .readUint256(),
                    CalldataPointer
                        .wrap(BasicOrder_offerAmount_cdPtr)
                        .readUint256(),
                    conduitKey,
                    accumulator
                );
            } else if (route == BasicOrderRouteType.ERC20_TO_ERC1155) {
                // Transfer ERC1155 to caller with offerer's conduit preference.
                _transferERC1155(
                    CalldataPointer
                        .wrap(BasicOrder_offerToken_cdPtr)
                        .readAddress(),
                    CalldataPointer
                        .wrap(BasicOrder_offerer_cdPtr)
                        .readAddress(),
                    msg.sender,
                    CalldataPointer
                        .wrap(BasicOrder_offerIdentifier_cdPtr)
                        .readUint256(),
                    CalldataPointer
                        .wrap(BasicOrder_offerAmount_cdPtr)
                        .readUint256(),
                    conduitKey,
                    accumulator
                );
            } else if (route == BasicOrderRouteType.ERC721_TO_ERC20) {
                // Transfer ERC721 to offerer using caller's conduit preference.
                _transferERC721(
                    CalldataPointer
                        .wrap(BasicOrder_considerationToken_cdPtr)
                        .readAddress(),
                    msg.sender,
                    CalldataPointer
                        .wrap(BasicOrder_offerer_cdPtr)
                        .readAddress(),
                    CalldataPointer
                        .wrap(BasicOrder_considerationIdentifier_cdPtr)
                        .readUint256(),
                    CalldataPointer
                        .wrap(BasicOrder_considerationAmount_cdPtr)
                        .readUint256(),
                    conduitKey,
                    accumulator
                );
            } else {
                // route == BasicOrderRouteType.ERC1155_TO_ERC20
                // Transfer ERC1155 to offerer with caller's conduit preference.
                _transferERC1155(
                    CalldataPointer
                        .wrap(BasicOrder_considerationToken_cdPtr)
                        .readAddress(),
                    msg.sender,
                    CalldataPointer
                        .wrap(BasicOrder_offerer_cdPtr)
                        .readAddress(),
                    CalldataPointer
                        .wrap(BasicOrder_considerationIdentifier_cdPtr)
                        .readUint256(),
                    CalldataPointer
                        .wrap(BasicOrder_considerationAmount_cdPtr)
                        .readUint256(),
                    conduitKey,
                    accumulator
                );
            }
            // Transfer ERC20 tokens to all recipients and wrap up.
            _transferERC20AndFinalize(
                offerTypeIsAdditionalRecipientsType,
                accumulator
            );
            // Trigger any remaining accumulated transfers via call to conduit.
            _triggerIfArmed(accumulator);
        }
        // Determine whether order is restricted and, if so, that it is valid.
        _assertRestrictedBasicOrderValidity(
            orderHash,
            orderType,
            callDataPointer
        );
        // Clear the reentrancy guard.
        _clearReentrancyGuard();
        return true;
    }
    /**
     * @dev Internal function to prepare fulfillment of a basic order with
     *      manual calldata and memory access. This calculates the order hash,
     *      emits an OrderFulfilled event, and asserts basic order validity.
     *      Note that calldata offsets must be validated as this function
     *      accesses constant calldata pointers for dynamic types that match
     *      default ABI encoding, but valid ABI encoding can use arbitrary
     *      offsets. Checking that the offsets were produced by default encoding
     *      will ensure that other functions using Solidity's calldata accessors
     *      (which calculate pointers from the stored offsets) are reading the
     *      same data as the order hash is derived from. Also note that this
     *      function accesses memory directly.
     *
     * @param orderType                    The order type.
     * @param receivedItemType             The item type of the initial
     *                                     consideration item on the order.
     * @param additionalRecipientsItemType The item type of any additional
     *                                     consideration item on the order.
     * @param additionalRecipientsToken    The ERC20 token contract address (if
     *                                     applicable) for any additional
     *                                     consideration item on the order.
     * @param offeredItemType              The item type of the offered item on
     *                                     the order.
     * @return orderHash The calculated order hash.
     */
    function _prepareBasicFulfillmentFromCalldata(
        OrderType orderType,
        ItemType receivedItemType,
        ItemType additionalRecipientsItemType,
        address additionalRecipientsToken,
        ItemType offeredItemType
    ) internal returns (bytes32 orderHash, uint256 callDataPointer) {
        // Ensure this function cannot be triggered during a reentrant call.
        _setReentrancyGuard(false); // Native tokens rejected during execution.
        // Verify that calldata offsets for all dynamic types were produced by
        // default encoding. This ensures that the constants used for calldata
        // pointers to dynamic types are the same as those calculated by
        // Solidity using their offsets. Also verify that the basic order type
        // is within range.
        _assertValidBasicOrderParameters();
        // Check for invalid time and missing original consideration items.
        // Utilize assembly so that constant calldata pointers can be applied.
        assembly {
            // Ensure current timestamp is between order start time & end time.
            if or(
                gt(calldataload(BasicOrder_startTime_cdPtr), timestamp()),
                iszero(gt(calldataload(BasicOrder_endTime_cdPtr), timestamp()))
            ) {
                // Store left-padded selector with push4 (reduces bytecode),
                // mem[28:32] = selector
                mstore(0, InvalidTime_error_selector)
                // Store arguments.
                mstore(
                    InvalidTime_error_startTime_ptr,
                    calldataload(BasicOrder_startTime_cdPtr)
                )
                mstore(
                    InvalidTime_error_endTime_ptr,
                    calldataload(BasicOrder_endTime_cdPtr)
                )
                // revert(abi.encodeWithSignature(
                //     "InvalidTime(uint256,uint256)",
                //     startTime,
                //     endTime
                // ))
                revert(Error_selector_offset, InvalidTime_error_length)
            }
            // Ensure consideration array length isn't less than total original.
            if lt(
                calldataload(BasicOrder_addlRecipients_length_cdPtr),
                calldataload(BasicOrder_totalOriginalAdditionalRecipients_cdPtr)
            ) {
                // Store left-padded selector with push4 (reduces bytecode),
                // mem[28:32] = selector
                mstore(0, MissingOriginalConsiderationItems_error_selector)
                // revert(abi.encodeWithSignature(
                //     "MissingOriginalConsiderationItems()"
                // ))
                revert(
                    Error_selector_offset,
                    MissingOriginalConsiderationItems_error_length
                )
            }
        }
        {
            /**
             * First, handle consideration items. Memory Layout:
             *  0x60: final hash of the array of consideration item hashes
             *  0x80-0x160: reused space for EIP712 hashing of each item
             *   - 0x80: ConsiderationItem EIP-712 typehash (constant)
             *   - 0xa0: itemType
             *   - 0xc0: token
             *   - 0xe0: identifier
             *   - 0x100: startAmount
             *   - 0x120: endAmount
             *   - 0x140: recipient
             *  0x160-END_ARR: array of consideration item hashes
             *   - 0x160: primary consideration item EIP712 hash
             *   - 0x180-END_ARR: additional recipient item EIP712 hashes
             *  END_ARR: beginning of data for OrderFulfilled event
             *   - END_ARR + 0x120: length of ReceivedItem array
             *   - END_ARR + 0x140: beginning of data for first ReceivedItem
             * (Note: END_ARR = 0x180 + RECIPIENTS_LENGTH * 0x20)
             */
            // Load consideration item typehash from runtime and place on stack.
            bytes32 typeHash = _CONSIDERATION_ITEM_TYPEHASH;
            // Utilize assembly to enable reuse of memory regions and use
            // constant pointers when possible.
            assembly {
                /*
                 * 1. Calculate the EIP712 ConsiderationItem hash for the
                 * primary consideration item of the basic order.
                 */
                // Write ConsiderationItem type hash and item type to memory.
                mstore(BasicOrder_considerationItem_typeHash_ptr, typeHash)
                mstore(
                    BasicOrder_considerationItem_itemType_ptr,
                    receivedItemType
                )
                // Copy calldata region with (token, identifier, amount) from
                // BasicOrderParameters to ConsiderationItem. The
                // considerationAmount is written to startAmount and endAmount
                // as basic orders do not have dynamic amounts.
                calldatacopy(
                    BasicOrder_considerationItem_token_ptr,
                    BasicOrder_considerationToken_cdPtr,
                    ThreeWords
                )
                // Copy calldata region with considerationAmount and offerer
                // from BasicOrderParameters to endAmount and recipient in
                // ConsiderationItem.
                calldatacopy(
                    BasicOrder_considerationItem_endAmount_ptr,
                    BasicOrder_considerationAmount_cdPtr,
                    TwoWords
                )
                // Calculate EIP712 ConsiderationItem hash and store it in the
                // array of EIP712 consideration hashes.
                mstore(
                    BasicOrder_considerationHashesArray_ptr,
                    keccak256(
                        BasicOrder_considerationItem_typeHash_ptr,
                        EIP712_ConsiderationItem_size
                    )
                )
                /*
                 * 2. Write a ReceivedItem struct for the primary consideration
                 * item to the consideration array in OrderFulfilled.
                 */
                // Get the additional recipients array length from calldata.
                // This variable will later be repurposed to track the total
                // original additional recipients instead of the total supplied.
                let totalAdditionalRecipients := calldataload(
                    BasicOrder_addlRecipients_length_cdPtr
                )
                // Calculate pointer to length of OrderFulfilled consideration
                // array. Note that this is based on total original additional
                // recipients and not the supplied additional recipients, since
                // the pointer only needs to be offset based on the size of the
                // EIP-712 hashes used to derive the order hash (and the order
                // hash does not take tips into account as part of derivation).
                let eventConsiderationArrPtr := add(
                    OrderFulfilled_consideration_length_baseOffset,
                    shl(
                        OneWordShift,
                        calldataload(
                            BasicOrder_totalOriginalAdditionalRecipients_cdPtr
                        )
                    )
                )
                // Set the length of the consideration array to the number of
                // additional recipients, plus one for the primary consideration
                // item.
                mstore(
                    eventConsiderationArrPtr,
                    add(totalAdditionalRecipients, 1)
                )
                // Overwrite the consideration array pointer so it points to the
                // body of the first element
                eventConsiderationArrPtr := add(
                    eventConsiderationArrPtr,
                    OneWord
                )
                // Set itemType at start of the ReceivedItem memory region.
                mstore(eventConsiderationArrPtr, receivedItemType)
                // Copy calldata region (token, identifier, amount & recipient)
                // from BasicOrderParameters to ReceivedItem memory.
                calldatacopy(
                    add(eventConsiderationArrPtr, Common_token_offset),
                    BasicOrder_considerationToken_cdPtr,
                    FourWords
                )
                /*
                 * 3. Calculate EIP712 ConsiderationItem hashes for original
                 * additional recipients and add a ReceivedItem for each to the
                 * consideration array in the OrderFulfilled event. The original
                 * additional recipients are all the consideration items signed
                 * by the offerer aside from the primary consideration items of
                 * the order. Uses memory region from 0x80-0x160 as a buffer for
                 * calculating EIP712 ConsiderationItem hashes.
                 */
                // Put pointer to consideration hashes array on the stack.
                // This will be updated as each additional recipient is hashed
                let
                    considerationHashesPtr
                := BasicOrder_considerationHashesArray_ptr
                // Write item type, token, & identifier for additional recipient
                // to memory region for hashing EIP712 ConsiderationItem; these
                // values will be reused for each recipient.
                mstore(
                    BasicOrder_considerationItem_itemType_ptr,
                    additionalRecipientsItemType
                )
                mstore(
                    BasicOrder_considerationItem_token_ptr,
                    additionalRecipientsToken
                )
                mstore(BasicOrder_considerationItem_identifier_ptr, 0)
                // Declare a stack variable where all additional recipients will
                // be combined to guard against providing dirty upper bits.
                let combinedAdditionalRecipients
                // Only iterate over the total original additional recipients
                // (not the total supplied additional recipients) when deriving
                // the order hash.
                totalAdditionalRecipients := calldataload(
                    BasicOrder_totalOriginalAdditionalRecipients_cdPtr
                )
                let i := 0
                for {
                } lt(i, totalAdditionalRecipients) {
                    i := add(i, 1)
                } {
                    /*
                     * Calculate EIP712 ConsiderationItem hash for recipient.
                     */
                    // Retrieve calldata pointer for additional recipient.
                    let additionalRecipientCdPtr := add(
                        BasicOrder_additionalRecipients_data_cdPtr,
                        mul(AdditionalRecipient_size, i)
                    )
                    // Copy startAmount from calldata to the ConsiderationItem
                    // struct.
                    calldatacopy(
                        BasicOrder_considerationItem_startAmount_ptr,
                        additionalRecipientCdPtr,
                        OneWord
                    )
                    // Copy endAmount and recipient from calldata to the
                    // ConsiderationItem struct.
                    calldatacopy(
                        BasicOrder_considerationItem_endAmount_ptr,
                        additionalRecipientCdPtr,
                        AdditionalRecipient_size
                    )
                    // Include the recipient as part of combined recipients.
                    combinedAdditionalRecipients := or(
                        combinedAdditionalRecipients,
                        calldataload(add(additionalRecipientCdPtr, OneWord))
                    )
                    // Add 1 word to the pointer as part of each loop to reduce
                    // operations needed to get local offset into the array.
                    considerationHashesPtr := add(
                        considerationHashesPtr,
                        OneWord
                    )
                    // Calculate EIP712 ConsiderationItem hash and store it in
                    // the array of consideration hashes.
                    mstore(
                        considerationHashesPtr,
                        keccak256(
                            BasicOrder_considerationItem_typeHash_ptr,
                            EIP712_ConsiderationItem_size
                        )
                    )
                    /*
                     * Write ReceivedItem to OrderFulfilled data.
                     */
                    // At this point, eventConsiderationArrPtr points to the
                    // beginning of the ReceivedItem struct of the previous
                    // element in the array. Increase it by the size of the
                    // struct to arrive at the pointer for the current element.
                    eventConsiderationArrPtr := add(
                        eventConsiderationArrPtr,
                        ReceivedItem_size
                    )
                    // Write itemType to the ReceivedItem struct.
                    mstore(
                        eventConsiderationArrPtr,
                        additionalRecipientsItemType
                    )
                    // Write token to the next word of the ReceivedItem struct.
                    mstore(
                        add(eventConsiderationArrPtr, OneWord),
                        additionalRecipientsToken
                    )
                    // Copy endAmount & recipient words to ReceivedItem struct.
                    calldatacopy(
                        add(
                            eventConsiderationArrPtr,
                            ReceivedItem_amount_offset
                        ),
                        additionalRecipientCdPtr,
                        TwoWords
                    )
                }
                /*
                 * 4. Hash packed array of ConsiderationItem EIP712 hashes:
                 *   `keccak256(abi.encodePacked(receivedItemHashes))`
                 * Note that it is set at 0x60 — all other memory begins at
                 * 0x80. 0x60 is the "zero slot" and will be restored at the end
                 * of the assembly section and before required by the compiler.
                 */
                mstore(
                    receivedItemsHash_ptr,
                    keccak256(
                        BasicOrder_considerationHashesArray_ptr,
                        shl(OneWordShift, add(totalAdditionalRecipients, 1))
                    )
                )
                /*
                 * 5. Add a ReceivedItem for each tip to the consideration array
                 * in the OrderFulfilled event. The tips are all the
                 * consideration items that were not signed by the offerer and
                 * were provided by the fulfiller.
                 */
                // Overwrite length to length of the additionalRecipients array.
                totalAdditionalRecipients := calldataload(
                    BasicOrder_addlRecipients_length_cdPtr
                )
                for {
                } lt(i, totalAdditionalRecipients) {
                    i := add(i, 1)
                } {
                    // Retrieve calldata pointer for additional recipient.
                    let additionalRecipientCdPtr := add(
                        BasicOrder_additionalRecipients_data_cdPtr,
                        mul(AdditionalRecipient_size, i)
                    )
                    // At this point, eventConsiderationArrPtr points to the
                    // beginning of the ReceivedItem struct of the previous
                    // element in the array. Increase it by the size of the
                    // struct to arrive at the pointer for the current element.
                    eventConsiderationArrPtr := add(
                        eventConsiderationArrPtr,
                        ReceivedItem_size
                    )
                    // Write itemType to the ReceivedItem struct.
                    mstore(
                        eventConsiderationArrPtr,
                        additionalRecipientsItemType
                    )
                    // Write token to the next word of the ReceivedItem struct.
                    mstore(
                        add(eventConsiderationArrPtr, OneWord),
                        additionalRecipientsToken
                    )
                    // Copy endAmount & recipient words to ReceivedItem struct.
                    calldatacopy(
                        add(
                            eventConsiderationArrPtr,
                            ReceivedItem_amount_offset
                        ),
                        additionalRecipientCdPtr,
                        TwoWords
                    )
                    // Include the recipient as part of combined recipients.
                    combinedAdditionalRecipients := or(
                        combinedAdditionalRecipients,
                        calldataload(add(additionalRecipientCdPtr, OneWord))
                    )
                }
                // Ensure no dirty upper bits on combined additional recipients.
                if gt(combinedAdditionalRecipients, MaskOverLastTwentyBytes) {
                    // Store left-padded selector with push4 (reduces bytecode),
                    // mem[28:32] = selector
                    mstore(0, InvalidBasicOrderParameterEncoding_error_selector)
                    // revert(abi.encodeWithSignature(
                    //     "InvalidBasicOrderParameterEncoding()"
                    // ))
                    revert(
                        Error_selector_offset,
                        InvalidBasicOrderParameterEncoding_error_length
                    )
                }
            }
        }
        {
            /**
             * Next, handle offered items. Memory Layout:
             *  EIP712 data for OfferItem
             *   - 0x80:  OfferItem EIP-712 typehash (constant)
             *   - 0xa0:  itemType
             *   - 0xc0:  token
             *   - 0xe0:  identifier (reused for offeredItemsHash)
             *   - 0x100: startAmount
             *   - 0x120: endAmount
             */
            // Place offer item typehash on the stack.
            bytes32 typeHash = _OFFER_ITEM_TYPEHASH;
            // Utilize assembly to enable reuse of memory regions when possible.
            assembly {
                /*
                 * 1. Calculate OfferItem EIP712 hash
                 */
                // Write the OfferItem typeHash to memory.
                mstore(BasicOrder_offerItem_typeHash_ptr, typeHash)
                // Write the OfferItem item type to memory.
                mstore(BasicOrder_offerItem_itemType_ptr, offeredItemType)
                // Copy calldata region with (offerToken, offerIdentifier,
                // offerAmount) from OrderParameters to (token, identifier,
                // startAmount) in OfferItem struct. The offerAmount is written
                // to startAmount and endAmount as basic orders do not have
                // dynamic amounts.
                calldatacopy(
                    BasicOrder_offerItem_token_ptr,
                    BasicOrder_offerToken_cdPtr,
                    ThreeWords
                )
                // Copy offerAmount from calldata to endAmount in OfferItem
                // struct.
                calldatacopy(
                    BasicOrder_offerItem_endAmount_ptr,
                    BasicOrder_offerAmount_cdPtr,
                    OneWord
                )
                // Compute EIP712 OfferItem hash, write result to scratch space:
                //   `keccak256(abi.encode(offeredItem))`
                mstore(
                    0,
                    keccak256(
                        BasicOrder_offerItem_typeHash_ptr,
                        EIP712_OfferItem_size
                    )
                )
                /*
                 * 2. Calculate hash of array of EIP712 hashes and write the
                 * result to the corresponding OfferItem struct:
                 *   `keccak256(abi.encodePacked(offerItemHashes))`
                 */
                mstore(BasicOrder_order_offerHashes_ptr, keccak256(0, OneWord))
            }
        }
        {
            /**
             * Once consideration items and offer items have been handled,
             * derive the final order hash. Memory Layout:
             *  0x80-0x1c0: EIP712 data for order
             *   - 0x80:   Order EIP-712 typehash (constant)
             *   - 0xa0:   orderParameters.offerer
             *   - 0xc0:   orderParameters.zone
             *   - 0xe0:   keccak256(abi.encodePacked(offerHashes))
             *   - 0x100:  keccak256(abi.encodePacked(considerationHashes))
             *   - 0x120:  orderParameters.basicOrderType (% 4 = orderType)
             *   - 0x140:  orderParameters.startTime
             *   - 0x160:  orderParameters.endTime
             *   - 0x180:  orderParameters.zoneHash
             *   - 0x1a0:  orderParameters.salt
             *   - 0x1c0:  orderParameters.conduitKey
             *   - 0x1e0:  _counters[orderParameters.offerer] (from storage)
             */
            // Read the offerer from calldata and place on the stack.
            address offerer;
            assembly {
                offerer := calldataload(BasicOrder_offerer_cdPtr)
            }
            // Read offerer's current counter from storage and place on stack.
            uint256 counter = _getCounter(offerer);
            // Load order typehash from runtime code and place on stack.
            bytes32 typeHash = _ORDER_TYPEHASH;
            assembly {
                // Set the OrderItem typeHash in memory.
                mstore(BasicOrder_order_typeHash_ptr, typeHash)
                // Copy offerer and zone from OrderParameters in calldata to the
                // Order struct.
                calldatacopy(
                    BasicOrder_order_offerer_ptr,
                    BasicOrder_offerer_cdPtr,
                    TwoWords
                )
                // Copy receivedItemsHash from zero slot to the Order struct.
                mstore(
                    BasicOrder_order_considerationHashes_ptr,
                    mload(receivedItemsHash_ptr)
                )
                // Write the supplied orderType to the Order struct.
                mstore(BasicOrder_order_orderType_ptr, orderType)
                // Copy startTime, endTime, zoneHash, salt & conduit from
                // calldata to the Order struct.
                calldatacopy(
                    BasicOrder_order_startTime_ptr,
                    BasicOrder_startTime_cdPtr,
                    FiveWords
                )
                // Write offerer's counter, retrieved from storage, to struct.
                mstore(BasicOrder_order_counter_ptr, counter)
                // Compute the EIP712 Order hash.
                orderHash := keccak256(
                    BasicOrder_order_typeHash_ptr,
                    EIP712_Order_size
                )
            }
        }
        assembly {
            /**
             * After the order hash has been derived, emit OrderFulfilled event:
             *   event OrderFulfilled(
             *     bytes32 orderHash,
             *     address indexed offerer,
             *     address indexed zone,
             *     address fulfiller,
             *     SpentItem[] offer,
             *       > (itemType, token, id, amount)
             *     ReceivedItem[] consideration
             *       > (itemType, token, id, amount, recipient)
             *   )
             * topic0 - OrderFulfilled event signature
             * topic1 - offerer
             * topic2 - zone
             * data:
             *  - 0x00: orderHash
             *  - 0x20: fulfiller
             *  - 0x40: offer arr ptr (0x80)
             *  - 0x60: consideration arr ptr (0x120)
             *  - 0x80: offer arr len (1)
             *  - 0xa0: offer.itemType
             *  - 0xc0: offer.token
             *  - 0xe0: offer.identifier
             *  - 0x100: offer.amount
             *  - 0x120: 1 + recipients.length
             *  - 0x140: recipient 0
             */
            // Derive pointer to start of OrderFulfilled event data.
            let eventDataPtr := add(
                OrderFulfilled_baseOffset,
                shl(
                    OneWordShift,
                    calldataload(
                        BasicOrder_totalOriginalAdditionalRecipients_cdPtr
                    )
                )
            )
            // Write the order hash to the head of the event's data region.
            mstore(eventDataPtr, orderHash)
            // Write the fulfiller (i.e. the caller) next for receiver argument.
            mstore(add(eventDataPtr, OrderFulfilled_fulfiller_offset), caller())
            // Write the SpentItem and ReceivedItem array offsets (constants).
            mstore(
                // SpentItem array offset
                add(eventDataPtr, OrderFulfilled_offer_head_offset),
                OrderFulfilled_offer_body_offset
            )
            mstore(
                // ReceivedItem array offset
                add(eventDataPtr, OrderFulfilled_consideration_head_offset),
                OrderFulfilled_consideration_body_offset
            )
            // Set a length of 1 for the offer array.
            mstore(
                add(
                    eventDataPtr,
                    OrderFulfilled_offer_length_offset_relativeTo_baseOffset
                ),
                1
            )
            // Write itemType to the SpentItem struct.
            mstore(
                add(
                    eventDataPtr,
                    OrderFulfilled_offer_itemType_offset_relativeTo_baseOffset
                ),
                offeredItemType
            )
            // Copy calldata region with (offerToken, offerIdentifier,
            // offerAmount) from OrderParameters to (token, identifier,
            // amount) in SpentItem struct.
            calldatacopy(
                add(
                    eventDataPtr,
                    OrderFulfilled_offer_token_offset_relativeTo_baseOffset
                ),
                BasicOrder_offerToken_cdPtr,
                ThreeWords
            )
            // Derive total data size including SpentItem and ReceivedItem data.
            // SpentItem portion is already included in the baseSize constant,
            // as there can only be one element in the array.
            let dataSize := add(
                OrderFulfilled_baseSize,
                mul(
                    calldataload(BasicOrder_addlRecipients_length_cdPtr),
                    ReceivedItem_size
                )
            )
            // Emit OrderFulfilled log with three topics (the event signature
            // as well as the two indexed arguments, the offerer and the zone).
            log3(
                // Supply the pointer for event data in memory.
                eventDataPtr,
                // Supply the size of event data in memory.
                dataSize,
                // Supply the OrderFulfilled event signature.
                OrderFulfilled_selector,
                // Supply the first topic (the offerer).
                calldataload(BasicOrder_offerer_cdPtr),
                // Supply the second topic (the zone).
                calldataload(BasicOrder_zone_cdPtr)
            )
            // Restore the zero slot.
            mstore(ZeroSlot, 0)
            // Update the free memory pointer so that event data is persisted.
            mstore(
                FreeMemoryPointerSlot,
                add(
                    eventDataPtr,
                    // Reserve extra 3 words to be used by `authorizeOrder` and
                    // `validatateOrder` if pre-post exection hook to the zone
                    // is required. These 3 memory slots will be used for the
                    // extra data/context and order hashes of the calldata.
                    add(
                        dataSize,
                        OrderFulfilled_post_memory_region_reservedBytes
                    )
                )
            )
        }
        // Verify the status of the derived order.
        OrderStatus storage orderStatus = _validateBasicOrder(orderHash);
        // Determine whether order is restricted and, if so, that it is valid.
        callDataPointer = _assertRestrictedBasicOrderAuthorization(
            orderHash,
            orderType
        );
        // Update the status of the order and mark as fully filled.
        _updateBasicOrderStatus(orderStatus);
        // Return the derived order hash.
        return (orderHash, callDataPointer);
    }
    /**
     * @dev Internal function to transfer an individual ERC721 or ERC1155 item
     *      from a given originator to a given recipient. The accumulator will
     *      be bypassed, meaning that this function should be utilized in cases
     *      where multiple item transfers can be accumulated into a single
     *      conduit call. Sufficient approvals must be set, either on the
     *      respective conduit or on this contract. Note that this function may
     *      only be safely called as part of basic orders, as it assumes a
     *      specific calldata encoding structure that must first be validated.
     *
     * @param itemType   The type of item to transfer, either ERC721 or ERC1155.
     * @param conduitKey A bytes32 value indicating what corresponding conduit,
     *                   if any, to source token approvals from. The zero hash
     *                   signifies that no conduit should be used, with direct
     *                   approvals set on this contract.
     */
    function _transferIndividual721Or1155Item(
        ItemType itemType,
        bytes32 conduitKey
    ) internal {
        // Retrieve token, from, identifier, and amount from calldata using
        // fixed calldata offsets based on strict basic parameter encoding.
        address token;
        address from;
        uint256 identifier;
        uint256 amount;
        assembly {
            token := calldataload(BasicOrder_offerToken_cdPtr)
            from := calldataload(BasicOrder_offerer_cdPtr)
            identifier := calldataload(BasicOrder_offerIdentifier_cdPtr)
            amount := calldataload(BasicOrder_offerAmount_cdPtr)
        }
        // Determine if the transfer is to be performed via a conduit.
        if (conduitKey != bytes32(0)) {
            // Ensure that the amount is non-zero.
            _assertNonZeroAmount(amount);
            // Use free memory pointer as calldata offset for the conduit call.
            uint256 callDataOffset;
            // Utilize assembly to place each argument in free memory.
            assembly {
                // Retrieve the free memory pointer and use it as the offset.
                callDataOffset := mload(FreeMemoryPointerSlot)
                // Write ConduitInterface.execute.selector to memory.
                mstore(callDataOffset, Conduit_execute_signature)
                // Write the offset to the ConduitTransfer array in memory.
                mstore(
                    add(
                        callDataOffset,
                        Conduit_execute_ConduitTransfer_offset_ptr
                    ),
                    Conduit_execute_ConduitTransfer_ptr
                )
                // Write the length of the ConduitTransfer array to memory.
                mstore(
                    add(
                        callDataOffset,
                        Conduit_execute_ConduitTransfer_length_ptr
                    ),
                    Conduit_execute_ConduitTransfer_length
                )
                // Write the item type to memory.
                mstore(
                    add(callDataOffset, Conduit_execute_transferItemType_ptr),
                    itemType
                )
                // Write the token to memory.
                mstore(
                    add(callDataOffset, Conduit_execute_transferToken_ptr),
                    token
                )
                // Write the transfer source to memory.
                mstore(
                    add(callDataOffset, Conduit_execute_transferFrom_ptr),
                    from
                )
                // Write the transfer recipient (the caller) to memory.
                mstore(
                    add(callDataOffset, Conduit_execute_transferTo_ptr),
                    caller()
                )
                // Write the token identifier to memory.
                mstore(
                    add(callDataOffset, Conduit_execute_transferIdentifier_ptr),
                    identifier
                )
                // Write the transfer amount to memory.
                mstore(
                    add(callDataOffset, Conduit_execute_transferAmount_ptr),
                    amount
                )
            }
            // Perform the call to the conduit.
            _callConduitUsingOffsets(
                conduitKey,
                callDataOffset,
                OneConduitExecute_size
            );
        } else {
            // Otherwise, determine whether it is an ERC721 or ERC1155 item.
            if (itemType == ItemType.ERC721) {
                // Ensure that exactly one 721 item is being transferred.
                if (amount != 1) {
                    _revertInvalidERC721TransferAmount(amount);
                }
                // Perform transfer to caller via the token contract directly.
                _performERC721Transfer(token, from, msg.sender, identifier);
            } else {
                // Ensure that the amount is non-zero.
                _assertNonZeroAmount(amount);
                // Perform transfer to caller via the token contract directly.
                _performERC1155Transfer(
                    token,
                    from,
                    msg.sender,
                    identifier,
                    amount
                );
            }
        }
    }
    /**
     * @dev Internal function to transfer Ether (or other native tokens) to a
     *      given recipient as part of basic order fulfillment. Note that
     *      conduits are not utilized for native tokens as the transferred
     *      amount must be provided as msg.value. Also note that this function
     *      may only be safely called as part of basic orders, as it assumes a
     *      specific calldata encoding structure that must first be validated.
     */
    function _transferNativeTokensAndFinalize() internal {
        // Put native token value supplied by the caller on the stack.
        uint256 nativeTokensRemaining = msg.value;
        // Retrieve consideration amount, offerer, and total size of additional
        // recipients data from calldata using fixed offsets and place on stack.
        uint256 amount;
        address payable to;
        uint256 totalAdditionalRecipientsDataSize;
        assembly {
            amount := calldataload(BasicOrder_considerationAmount_cdPtr)
            to := calldataload(BasicOrder_offerer_cdPtr)
            totalAdditionalRecipientsDataSize := shl(
                AdditionalRecipient_size_shift,
                calldataload(BasicOrder_addlRecipients_length_cdPtr)
            )
        }
        uint256 additionalRecipientAmount;
        address payable recipient;
        // Skip overflow check as for loop is indexed starting at zero.
        unchecked {
            // Iterate over additional recipient data by two-word element.
            for (
                uint256 i = 0;
                i < totalAdditionalRecipientsDataSize;
                i += AdditionalRecipient_size
            ) {
                assembly {
                    // Retrieve calldata pointer for additional recipient.
                    let additionalRecipientCdPtr := add(
                        BasicOrder_additionalRecipients_data_cdPtr,
                        i
                    )
                    additionalRecipientAmount := calldataload(
                        additionalRecipientCdPtr
                    )
                    recipient := calldataload(
                        add(OneWord, additionalRecipientCdPtr)
                    )
                }
                // Ensure that sufficient native tokens are available.
                if (additionalRecipientAmount > nativeTokensRemaining) {
                    _revertInsufficientNativeTokensSupplied();
                }
                // Reduce native token value available. Skip underflow check as
                // subtracted value is confirmed above as less than remaining.
                nativeTokensRemaining -= additionalRecipientAmount;
                // Transfer native tokens to the additional recipient.
                _transferNativeTokens(recipient, additionalRecipientAmount);
            }
        }
        // Ensure that sufficient native tokens are still available.
        if (amount > nativeTokensRemaining) {
            _revertInsufficientNativeTokensSupplied();
        }
        // Transfer native tokens to the offerer.
        _transferNativeTokens(to, amount);
        // If any native tokens remain after transfers, return to the caller.
        if (nativeTokensRemaining > amount) {
            // Skip underflow check as nativeTokensRemaining > amount.
            unchecked {
                // Transfer remaining native tokens to the caller.
                _transferNativeTokens(
                    payable(msg.sender),
                    nativeTokensRemaining - amount
                );
            }
        }
    }
    /**
     * @dev Internal function to transfer ERC20 tokens to a given recipient as
     *      part of basic order fulfillment. Note that this function may only be
     *      safely called as part of basic orders, as it assumes a specific
     *      calldata encoding structure that must first be validated. Also note
     *      that basic order parameters are retrieved using fixed offsets, this
     *      requires that strict basic order encoding has already been verified.
     *
     * @param fromOfferer A boolean indicating whether to decrement amount from
     *                    the offered amount.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _transferERC20AndFinalize(
        bool fromOfferer,
        bytes memory accumulator
    ) internal {
        // Declare from and to variables determined by fromOfferer value.
        address from;
        address to;
        // Declare token and amount variables determined by fromOfferer value.
        address token;
        uint256 amount;
        // Declare and check identifier variable within an isolated scope.
        {
            // Declare identifier variable determined by fromOfferer value.
            uint256 identifier;
            // Set ERC20 token transfer variables based on fromOfferer boolean.
            if (fromOfferer) {
                // Use offerer as from value, msg.sender as to value, and offer
                // token, identifier, & amount values if token is from offerer.
                assembly {
                    from := calldataload(BasicOrder_offerer_cdPtr)
                    to := caller()
                    token := calldataload(BasicOrder_offerToken_cdPtr)
                    identifier := calldataload(BasicOrder_offerIdentifier_cdPtr)
                    amount := calldataload(BasicOrder_offerAmount_cdPtr)
                }
            } else {
                // Otherwise, use msg.sender as from value, offerer as to value,
                // and consideration token, identifier, and amount values.
                assembly {
                    from := caller()
                    to := calldataload(BasicOrder_offerer_cdPtr)
                    token := calldataload(BasicOrder_considerationToken_cdPtr)
                    identifier := calldataload(
                        BasicOrder_considerationIdentifier_cdPtr
                    )
                    amount := calldataload(BasicOrder_considerationAmount_cdPtr)
                }
            }
            // Ensure that no identifier is supplied.
            if (identifier != 0) {
                _revertUnusedItemParameters();
            }
        }
        // Determine the appropriate conduit to utilize.
        bytes32 conduitKey;
        // Utilize assembly to derive conduit (if relevant) based on route.
        assembly {
            // Use offerer conduit if fromOfferer, fulfiller conduit otherwise.
            conduitKey := calldataload(
                sub(
                    BasicOrder_fulfillerConduit_cdPtr,
                    shl(OneWordShift, fromOfferer)
                )
            )
        }
        // Retrieve total size of additional recipients data and place on stack.
        uint256 totalAdditionalRecipientsDataSize;
        assembly {
            totalAdditionalRecipientsDataSize := shl(
                AdditionalRecipient_size_shift,
                calldataload(BasicOrder_addlRecipients_length_cdPtr)
            )
        }
        uint256 additionalRecipientAmount;
        address recipient;
        // Iterate over each additional recipient.
        for (uint256 i = 0; i < totalAdditionalRecipientsDataSize; ) {
            assembly {
                // Retrieve calldata pointer for additional recipient.
                let additionalRecipientCdPtr := add(
                    BasicOrder_additionalRecipients_data_cdPtr,
                    i
                )
                additionalRecipientAmount := calldataload(
                    additionalRecipientCdPtr
                )
                recipient := calldataload(
                    add(OneWord, additionalRecipientCdPtr)
                )
            }
            // Decrement the amount to transfer to fulfiller if indicated.
            if (fromOfferer) {
                amount -= additionalRecipientAmount;
            }
            // Transfer ERC20 tokens to additional recipient given approval.
            _transferERC20(
                token,
                from,
                recipient,
                additionalRecipientAmount,
                conduitKey,
                accumulator
            );
            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                i += AdditionalRecipient_size;
            }
        }
        // Transfer ERC20 token amount (from account must have proper approval).
        _transferERC20(token, from, to, amount, conduitKey, accumulator);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ItemType,
    OrderType,
    Side
} from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    AdvancedOrder,
    ConsiderationItem,
    CriteriaResolver,
    MemoryPointer,
    OfferItem,
    OrderParameters
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {
    _revertCriteriaNotEnabledForItem,
    _revertInvalidProof,
    _revertOrderCriteriaResolverOutOfRange
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    CriteriaResolutionErrors
} from "seaport-types/src/interfaces/CriteriaResolutionErrors.sol";
import {
    OneWord,
    OneWordShift,
    OrderParameters_consideration_head_offset,
    Selector_length,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    ConsiderationCriteriaResolverOutOfRange_err_selector,
    Error_selector_offset,
    OfferCriteriaResolverOutOfRange_error_selector,
    UnresolvedConsiderationCriteria_error_itemIndex_ptr,
    UnresolvedConsiderationCriteria_error_length,
    UnresolvedConsiderationCriteria_error_orderIndex_ptr,
    UnresolvedConsiderationCriteria_error_selector,
    UnresolvedOfferCriteria_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
/**
 * @title CriteriaResolution
 * @author 0age
 * @notice CriteriaResolution contains a collection of pure functions related to
 *         resolving criteria-based items.
 */
contract CriteriaResolution is CriteriaResolutionErrors {
    /**
     * @dev Internal pure function to apply criteria resolvers containing
     *      specific token identifiers and associated proofs to order items.
     *
     * @param advancedOrders     The orders to apply criteria resolvers to.
     * @param criteriaResolvers  An array where each element contains a
     *                           reference to a specific order as well as that
     *                           order's offer or consideration, a token
     *                           identifier, and a proof that the supplied token
     *                           identifier is contained in the order's merkle
     *                           root. Note that a root of zero indicates that
     *                           any transferable token identifier is valid and
     *                           that no proof needs to be supplied.
     */
    function _applyCriteriaResolvers(
        AdvancedOrder[] memory advancedOrders,
        CriteriaResolver[] memory criteriaResolvers
    ) internal pure {
        // Skip overflow checks as all for loops are indexed starting at zero.
        unchecked {
            // Retrieve length of criteria resolvers array and place on stack.
            uint256 totalCriteriaResolvers = criteriaResolvers.length;
            // Retrieve length of orders array and place on stack.
            uint256 totalAdvancedOrders = advancedOrders.length;
            // Iterate over each criteria resolver.
            for (uint256 i = 0; i < totalCriteriaResolvers; ++i) {
                // Retrieve the criteria resolver.
                CriteriaResolver memory criteriaResolver = (
                    criteriaResolvers[i]
                );
                // Read the order index from memory and place it on the stack.
                uint256 orderIndex = criteriaResolver.orderIndex;
                // Ensure that the order index is in range.
                if (orderIndex >= totalAdvancedOrders) {
                    _revertOrderCriteriaResolverOutOfRange(
                        criteriaResolver.side
                    );
                }
                // Retrieve the referenced advanced order.
                AdvancedOrder memory advancedOrder = advancedOrders[orderIndex];
                // Skip criteria resolution for order if not fulfilled.
                if (advancedOrder.numerator == 0) {
                    continue;
                }
                // Retrieve the parameters for the order.
                OrderParameters memory orderParameters = (
                    advancedOrder.parameters
                );
                {
                    // Get a pointer to the list of items to give to
                    // _updateCriteriaItem. If the resolver refers to a
                    // consideration item, this array pointer will be replaced
                    // with the consideration array.
                    OfferItem[] memory items = orderParameters.offer;
                    // Read component index from memory and place it on stack.
                    uint256 componentIndex = criteriaResolver.index;
                    // Get error selector for `OfferCriteriaResolverOutOfRange`.
                    uint256 errorSelector = (
                        OfferCriteriaResolverOutOfRange_error_selector
                    );
                    // If the resolver refers to a consideration item...
                    if (criteriaResolver.side != Side.OFFER) {
                        // Get the pointer to `orderParameters.consideration`
                        // Using the array directly has a significant impact on
                        // the optimized compiler output.
                        MemoryPointer considerationPtr = orderParameters
                            .toMemoryPointer()
                            .pptrOffset(
                                OrderParameters_consideration_head_offset
                            );
                        // Replace the items pointer with a pointer to the
                        // consideration array.
                        assembly {
                            items := considerationPtr
                        }
                        // Replace the error selector with the selector for
                        // `ConsiderationCriteriaResolverOutOfRange`.
                        errorSelector = (
                            ConsiderationCriteriaResolverOutOfRange_err_selector
                        );
                    }
                    // Ensure that the component index is in range.
                    if (componentIndex >= items.length) {
                        assembly {
                            // Revert with either
                            // `OfferCriteriaResolverOutOfRange()` or
                            // `ConsiderationCriteriaResolverOutOfRange()`,
                            // depending on whether the resolver refers to a
                            // consideration item.
                            mstore(0, errorSelector)
                            // revert(abi.encodeWithSignature(
                            //    "OfferCriteriaResolverOutOfRange()"
                            // ))
                            // or
                            // revert(abi.encodeWithSignature(
                            //    "ConsiderationCriteriaResolverOutOfRange()"
                            // ))
                            revert(Error_selector_offset, Selector_length)
                        }
                    }
                    // Apply the criteria resolver to the item in question.
                    _updateCriteriaItem(
                        items,
                        componentIndex,
                        criteriaResolver
                    );
                }
            }
            // Iterate over each advanced order.
            for (uint256 i = 0; i < totalAdvancedOrders; ++i) {
                // Retrieve the advanced order.
                AdvancedOrder memory advancedOrder = advancedOrders[i];
                // Skip criteria resolution for order if not fulfilled.
                if (advancedOrder.numerator == 0) {
                    continue;
                }
                // Retrieve the parameters for the order.
                OrderParameters memory orderParameters = (
                    advancedOrder.parameters
                );
                OrderType orderType = orderParameters.orderType;
                _ensureAllRequiredCriteriaResolved(
                    i,
                    orderParameters.consideration,
                    orderType,
                    UnresolvedConsiderationCriteria_error_selector
                );
                _toOfferItemArgumentType(_ensureAllRequiredCriteriaResolved)(
                    i,
                    orderParameters.offer,
                    orderType,
                    UnresolvedOfferCriteria_error_selector
                );
            }
        }
    }
    /**
     * @dev Internal pure function to examine an array of items and ensure that
     *      all criteria-based items (with the exception of wildcard items on
     *      contract orders) have had a criteria resolver successfully applied.
     *
     * @param orderIndex     The index of the order being examined.
     * @param items          The items to examine. These are consideration items
     *                       in the default case, but offer items are also
     *                       casted to consideration items as required.
     * @param orderType      The type of order being examined.
     * @param revertSelector The selector to use when reverting.
     */
    function _ensureAllRequiredCriteriaResolved(
        uint256 orderIndex,
        ConsiderationItem[] memory items,
        OrderType orderType,
        uint256 revertSelector
    ) internal pure {
        // Read items array length from memory and place on stack.
        uint256 totalItems = items.length;
        // Iterate over each item on the order.
        for (uint256 i = 0; i < totalItems; ++i) {
            ConsiderationItem memory item = items[i];
            // Revert if the item is still a criteria item unless the
            // order is a contract order and the identifier is 0.
            ItemType itemType = item.itemType;
            uint256 identifierOrCriteria = item.identifierOrCriteria;
            assembly {
                if and(
                    gt(itemType, 3), // Criteria-based item
                    or(
                        iszero(eq(orderType, 4)), // not OrderType.CONTRACT
                        iszero(iszero(identifierOrCriteria)) // not wildcard
                    )
                ) {
                    // Store left-padded selector with push4 (reduces bytecode),
                    // mem[28:32] = selector
                    mstore(0, revertSelector)
                    // Store arguments.
                    mstore(
                        UnresolvedConsiderationCriteria_error_orderIndex_ptr,
                        orderIndex
                    )
                    mstore(
                        UnresolvedConsiderationCriteria_error_itemIndex_ptr,
                        i
                    )
                    // Revert with appropriate UnresolvedCriteria error message.
                    // Unresolved[Offer|Consideration]Criteria(uint256, uint256)
                    revert(
                        Error_selector_offset,
                        UnresolvedConsiderationCriteria_error_length
                    )
                }
            }
        }
    }
    /**
     * @dev Internal pure function to perform a function cast from a function
     *      that accepts consideration items to a function that accepts offer
     *      items, used by _ensureAllRequiredCriteriaResolved to ensure that
     *      all necessary criteria items have been resolved for an order.
     *
     * @param inFn  The function that accepts consideration items.
     * @param outFn The function that accepts offer items.
     */
    function _toOfferItemArgumentType(
        function(uint256, ConsiderationItem[] memory, OrderType, uint256)
            internal
            pure inFn
    )
        internal
        pure
        returns (
            function(uint256, OfferItem[] memory, OrderType, uint256)
                internal
                pure outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Internal pure function to update a criteria item.
     *
     * @param offer             The offer containing the item to update.
     * @param componentIndex    The index of the item to update.
     * @param criteriaResolver  The criteria resolver to use to update the item.
     */
    function _updateCriteriaItem(
        OfferItem[] memory offer,
        uint256 componentIndex,
        CriteriaResolver memory criteriaResolver
    ) internal pure {
        // Retrieve relevant item using the component index.
        OfferItem memory offerItem = offer[componentIndex];
        // Read item type and criteria from memory & place on stack.
        ItemType itemType = offerItem.itemType;
        // Ensure the specified item type indicates criteria usage.
        if (!_isItemWithCriteria(itemType)) {
            _revertCriteriaNotEnabledForItem();
        }
        uint256 identifierOrCriteria = offerItem.identifierOrCriteria;
        // If criteria is not 0 (i.e. a collection-wide criteria-based item)...
        if (identifierOrCriteria != uint256(0)) {
            // Verify identifier inclusion in criteria root using proof.
            _verifyProof(
                criteriaResolver.identifier,
                identifierOrCriteria,
                criteriaResolver.criteriaProof
            );
        } else if (criteriaResolver.criteriaProof.length != 0) {
            // Revert if non-empty proof is supplied for a collection-wide item.
            _revertInvalidProof();
        }
        // Update item type to remove criteria usage.
        // Use assembly to operate on ItemType enum as a number.
        ItemType newItemType;
        assembly {
            // Item type 4 becomes 2 and item type 5 becomes 3.
            newItemType := sub(itemType, 2)
        }
        offerItem.itemType = newItemType;
        // Update identifier w/ supplied identifier.
        offerItem.identifierOrCriteria = criteriaResolver.identifier;
    }
    /**
     * @dev Internal pure function to check whether a given item type represents
     *      a criteria-based ERC721 or ERC1155 item (e.g. an item that can be
     *      resolved to one of a number of different identifiers at the time of
     *      order fulfillment).
     *
     * @param itemType The item type in question.
     *
     * @return withCriteria A boolean indicating that the item type in question
     *                      represents a criteria-based item.
     */
    function _isItemWithCriteria(
        ItemType itemType
    ) internal pure returns (bool withCriteria) {
        // ERC721WithCriteria is ItemType 4. ERC1155WithCriteria is ItemType 5.
        assembly {
            withCriteria := gt(itemType, 3)
        }
    }
    /**
     * @dev Internal pure function to ensure that a given element is contained
     *      in a merkle root via a supplied proof.
     *
     * @param leaf  The element for which to prove inclusion.
     * @param root  The merkle root that inclusion will be proved against.
     * @param proof The merkle proof.
     */
    function _verifyProof(
        uint256 leaf,
        uint256 root,
        bytes32[] memory proof
    ) internal pure {
        // Declare a variable that will be used to determine proof validity.
        bool isValid;
        // Utilize assembly to efficiently verify the proof against the root.
        assembly {
            // Store the leaf at the beginning of scratch space.
            mstore(0, leaf)
            // Derive the hash of the leaf to use as the initial proof element.
            let computedHash := keccak256(0, OneWord)
            // Get memory start location of the first element in proof array.
            let data := add(proof, OneWord)
            // Iterate over each proof element to compute the root hash.
            for {
                // Left shift by 5 is equivalent to multiplying by 0x20.
                let end := add(data, shl(OneWordShift, mload(proof)))
            } lt(data, end) {
                // Increment by one word at a time.
                data := add(data, OneWord)
            } {
                // Get the proof element.
                let loadedData := mload(data)
                // Sort proof elements and place them in scratch space.
                // Slot of `computedHash` in scratch space.
                // If the condition is true: 0x20, otherwise: 0x00.
                let scratch := shl(OneWordShift, gt(computedHash, loadedData))
                // Store elements to hash contiguously in scratch space. Scratch
                // space is 64 bytes (0x00 - 0x3f) & both elements are 32 bytes.
                mstore(scratch, computedHash)
                mstore(xor(scratch, OneWord), loadedData)
                // Derive the updated hash.
                computedHash := keccak256(0, TwoWords)
            }
            // Compare the final hash to the supplied root.
            isValid := eq(computedHash, root)
        }
        // Revert if computed hash does not equal supplied root.
        if (!isValid) {
            _revertInvalidProof();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    AmountDerivationErrors
} from "seaport-types/src/interfaces/AmountDerivationErrors.sol";
import {
    Error_selector_offset,
    InexactFraction_error_length,
    InexactFraction_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
/**
 * @title AmountDeriver
 * @author 0age
 * @notice AmountDeriver contains view and pure functions related to deriving
 *         item amounts based on partial fill quantity and on linear
 *         interpolation based on current time when the start amount and end
 *         amount differ.
 */
contract AmountDeriver is AmountDerivationErrors {
    /**
     * @dev Internal view function to derive the current amount of a given item
     *      based on the current price, the starting price, and the ending
     *      price. If the start and end prices differ, the current price will be
     *      interpolated on a linear basis. Note that this function expects that
     *      the startTime parameter of orderParameters is not greater than the
     *      current block timestamp and that the endTime parameter is greater
     *      than the current block timestamp. If this condition is not upheld,
     *      duration / elapsed / remaining variables will underflow.
     *
     * @param startAmount The starting amount of the item.
     * @param endAmount   The ending amount of the item.
     * @param startTime   The starting time of the order.
     * @param endTime     The end time of the order.
     * @param roundUp     A boolean indicating whether the resultant amount
     *                    should be rounded up or down.
     *
     * @return amount The current amount.
     */
    function _locateCurrentAmount(
        uint256 startAmount,
        uint256 endAmount,
        uint256 startTime,
        uint256 endTime,
        bool roundUp
    ) internal view returns (uint256 amount) {
        // Only modify end amount if it doesn't already equal start amount.
        if (startAmount != endAmount) {
            // Declare variables to derive in the subsequent unchecked scope.
            uint256 duration;
            uint256 elapsed;
            uint256 remaining;
            // Skip underflow checks as startTime <= block.timestamp < endTime.
            unchecked {
                // Derive the duration for the order and place it on the stack.
                duration = endTime - startTime;
                // Derive time elapsed since the order started & place on stack.
                elapsed = block.timestamp - startTime;
                // Derive time remaining until order expires and place on stack.
                remaining = duration - elapsed;
            }
            // Aggregate new amounts weighted by time with rounding factor.
            uint256 totalBeforeDivision = ((startAmount * remaining) +
                (endAmount * elapsed));
            // Use assembly to combine operations and skip divide-by-zero check.
            assembly {
                // Multiply by iszero(iszero(totalBeforeDivision)) to ensure
                // amount is set to zero if totalBeforeDivision is zero,
                // as intermediate overflow can occur if it is zero.
                amount := mul(
                    iszero(iszero(totalBeforeDivision)),
                    // Subtract 1 from the numerator and add 1 to the result
                    // if roundUp is true to get proper rounding direction.
                    // Division is performed with no zero check as duration
                    // cannot be zero as long as startTime < endTime.
                    add(
                        div(sub(totalBeforeDivision, roundUp), duration),
                        roundUp
                    )
                )
            }
            // Return the current amount.
            return amount;
        }
        // Return the original amount as startAmount == endAmount.
        return endAmount;
    }
    /**
     * @dev Internal pure function to return a fraction of a given value and to
     *      ensure the resultant value does not have any fractional component.
     *      Note that this function assumes that zero will never be supplied as
     *      the denominator parameter; invalid / undefined behavior will result
     *      should a denominator of zero be provided.
     *
     * @param numerator   A value indicating the portion of the order that
     *                    should be filled.
     * @param denominator A value indicating the total size of the order. Note
     *                    that this value cannot be equal to zero.
     * @param value       The value for which to compute the fraction.
     *
     * @return newValue The value after applying the fraction.
     */
    function _getFraction(
        uint256 numerator,
        uint256 denominator,
        uint256 value
    ) internal pure returns (uint256 newValue) {
        // Return value early in cases where the fraction resolves to 1.
        if (numerator == denominator) {
            return value;
        }
        // Ensure fraction can be applied to the value with no remainder. Note
        // that the denominator cannot be zero.
        assembly {
            // Ensure new value contains no remainder via mulmod operator.
            // Credit to @hrkrshnn + @axic for proposing this optimal solution.
            if mulmod(value, numerator, denominator) {
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, InexactFraction_error_selector)
                // revert(abi.encodeWithSignature("InexactFraction()"))
                revert(Error_selector_offset, InexactFraction_error_length)
            }
        }
        // Multiply the numerator by the value and ensure no overflow occurs.
        uint256 valueTimesNumerator = value * numerator;
        // Divide by the denominator (note that denominator cannot be zero).
        assembly {
            // Perform division without zero check.
            newValue := div(valueTimesNumerator, denominator)
        }
    }
    /**
     * @dev Internal view function to apply a fraction to a consideration
     * or offer item.
     *
     * @param startAmount     The starting amount of the item.
     * @param endAmount       The ending amount of the item.
     * @param numerator       A value indicating the portion of the order that
     *                        should be filled.
     * @param denominator     A value indicating the total size of the order.
     * @param startTime       The starting time of the order.
     * @param endTime         The end time of the order.
     * @param roundUp         A boolean indicating whether the resultant
     *                        amount should be rounded up or down.
     *
     * @return amount The received item to transfer with the final amount.
     */
    function _applyFraction(
        uint256 startAmount,
        uint256 endAmount,
        uint256 numerator,
        uint256 denominator,
        uint256 startTime,
        uint256 endTime,
        bool roundUp
    ) internal view returns (uint256 amount) {
        // If start amount equals end amount, apply fraction to end amount.
        if (startAmount == endAmount) {
            // Apply fraction to end amount.
            amount = _getFraction(numerator, denominator, endAmount);
        } else {
            // Otherwise, apply fraction to both and interpolated final amount.
            amount = _locateCurrentAmount(
                _getFraction(numerator, denominator, startAmount),
                _getFraction(numerator, denominator, endAmount),
                startTime,
                endTime,
                roundUp
            );
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import { Side } from "../lib/ConsiderationEnums.sol";
/**
 * @title FulfillmentApplicationErrors
 * @author 0age
 * @notice FulfillmentApplicationErrors contains errors related to fulfillment
 *         application and aggregation.
 */
interface FulfillmentApplicationErrors {
    /**
     * @dev Revert with an error when a fulfillment is provided that does not
     *      declare at least one component as part of a call to fulfill
     *      available orders.
     */
    error MissingFulfillmentComponentOnAggregation(Side side);
    /**
     * @dev Revert with an error when a fulfillment is provided that does not
     *      declare at least one offer component and at least one consideration
     *      component.
     */
    error OfferAndConsiderationRequiredOnFulfillment();
    /**
     * @dev Revert with an error when the initial offer item named by a
     *      fulfillment component does not match the type, token, identifier,
     *      or conduit preference of the initial consideration item.
     *
     * @param fulfillmentIndex The index of the fulfillment component that
     *                         does not match the initial offer item.
     */
    error MismatchedFulfillmentOfferAndConsiderationComponents(
        uint256 fulfillmentIndex
    );
    /**
     * @dev Revert with an error when an order or item index are out of range
     *      or a fulfillment component does not match the type, token,
     *      identifier, or conduit preference of the initial consideration item.
     */
    error InvalidFulfillmentComponentData();
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import { OrderType } from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    AdvancedOrder,
    ConsiderationItem,
    OfferItem,
    Order,
    OrderComponents,
    OrderParameters,
    OrderStatus
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {
    _revertBadFraction,
    _revertCannotCancelOrder,
    _revertConsiderationLengthNotEqualToTotalOriginal,
    _revertInvalidContractOrder,
    _revertPartialFillsNotEnabledForOrder
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import { Executor } from "./Executor.sol";
import { ZoneInteraction } from "./ZoneInteraction.sol";
import { MemoryPointer } from "seaport-types/src/helpers/PointerLibraries.sol";
import {
    AdvancedOrder_denominator_offset,
    AdvancedOrder_numerator_offset,
    BasicOrder_basicOrderParameters_cd_offset,
    BasicOrder_offerer_cdPtr,
    BasicOrder_signature_cdPtr,
    Common_amount_offset,
    Common_endAmount_offset,
    Common_identifier_offset,
    Common_token_offset,
    ConsiderItem_recipient_offset,
    ContractOrder_orderHash_offerer_shift,
    MaxUint120,
    OrderStatus_filledDenominator_offset,
    OrderStatus_filledNumerator_offset,
    OrderStatus_ValidatedAndNotCancelled,
    OrderStatus_ValidatedAndNotCancelledAndFullyFilled,
    ReceivedItem_recipient_offset
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    Error_selector_offset,
    Panic_arithmetic,
    Panic_error_code_ptr,
    Panic_error_length,
    Panic_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
import {
    CalldataPointer
} from "seaport-types/src/helpers/PointerLibraries.sol";
/**
 * @title OrderValidator
 * @author 0age
 * @notice OrderValidator contains functionality related to validating orders
 *         and updating their status.
 */
contract OrderValidator is Executor, ZoneInteraction {
    // Track status of each order (validated, cancelled, and fraction filled).
    mapping(bytes32 => OrderStatus) private _orderStatus;
    // Track nonces for contract offerers.
    mapping(address => uint256) internal _contractNonces;
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) Executor(conduitController) {}
    /**
     * @dev Internal function to verify the status of a basic order.
     *      Note that this function may only be safely called as part of basic
     *      orders, as it assumes a specific calldata encoding structure that
     *      must first be validated.
     *
     * @param orderHash The hash of the order.
     */
    function _validateBasicOrder(
        bytes32 orderHash
    ) internal view returns (OrderStatus storage orderStatus) {
        // Retrieve offerer directly using fixed calldata offset based on strict
        // basic parameter encoding.
        address offerer;
        assembly {
            offerer := calldataload(BasicOrder_offerer_cdPtr)
        }
        // Retrieve the order status for the given order hash.
        orderStatus = _orderStatus[orderHash];
        // Ensure order is fillable and is not cancelled.
        _verifyOrderStatus(
            orderHash,
            orderStatus,
            true, // Only allow unused orders when fulfilling basic orders.
            _runTimeConstantTrue() // Signifies to revert if order is invalid.
        );
        unchecked {
            // If the order is not already validated, verify supplied signature.
            if (!orderStatus.isValidated) {
                _verifySignature(
                    offerer,
                    orderHash,
                    _toBytesReturnType(_decodeBytes)(
                        // Wrap the absolute pointer to the order signature as a
                        // CalldataPointer.
                        CalldataPointer.wrap(
                            // Read the relative pointer to the order signature.
                            CalldataPointer
                                .wrap(BasicOrder_signature_cdPtr)
                                .readMaskedUint256() +
                                // Add the BasicOrderParameters struct offset to
                                // the relative pointer.
                                BasicOrder_basicOrderParameters_cd_offset
                        )
                    )
                );
            }
        }
    }
    /**
     * @dev Internal function to update the status of a basic order, assuming
     *      all validation has already been performed.
     *
     * @param orderStatus A storage pointer referencing the order status.
     */
    function _updateBasicOrderStatus(OrderStatus storage orderStatus) internal {
        // Utilize assembly to efficiently update the order status.
        assembly {
            // Update order status as validated, not cancelled, & fully filled.
            sstore(
                orderStatus.slot,
                OrderStatus_ValidatedAndNotCancelledAndFullyFilled
            )
        }
    }
    /**
     * @dev Internal function to validate an order, determine what portion to
     *      fill, and update its status. The desired fill amount is supplied as
     *      a fraction, as is the returned amount to fill.
     *
     * @param advancedOrder     The order to fulfill as well as the fraction to
     *                          fill. Note that all offer and consideration
     *                          amounts must divide with no remainder in order
     *                          for a partial fill to be valid.
     * @param revertOnInvalid   A boolean indicating whether to revert if the
     *                          order is invalid due to the time or status.
     *
     * @return orderHash      The order hash.
     * @return numerator      A value indicating the portion of the order that
     *                        will be filled.
     * @return denominator    A value indicating the total size of the order.
     */
    function _validateOrder(
        AdvancedOrder memory advancedOrder,
        bool revertOnInvalid
    )
        internal
        view
        returns (bytes32 orderHash, uint256 numerator, uint256 denominator)
    {
        // Retrieve the parameters for the order.
        OrderParameters memory orderParameters = advancedOrder.parameters;
        // Ensure current timestamp falls between order start time and end time.
        if (
            !_verifyTime(
                orderParameters.startTime,
                orderParameters.endTime,
                revertOnInvalid
            )
        ) {
            // Assuming an invalid time and no revert, return zeroed out values.
            return (bytes32(0), 0, 0);
        }
        // Read numerator and denominator from memory and place on the stack.
        // Note that overflowed values are masked.
        assembly {
            numerator := and(
                mload(add(advancedOrder, AdvancedOrder_numerator_offset)),
                MaxUint120
            )
            denominator := and(
                mload(add(advancedOrder, AdvancedOrder_denominator_offset)),
                MaxUint120
            )
        }
        // Declare variable for tracking the validity of the supplied fraction.
        bool invalidFraction;
        // If the order is a contract order, return the generated order.
        if (orderParameters.orderType == OrderType.CONTRACT) {
            // Ensure that the numerator and denominator are both equal to 1.
            assembly {
                // (1 ^ nd =/= 0) => (nd =/= 1) => (n =/= 1) || (d =/= 1)
                // It's important that the values are 120-bit masked before
                // multiplication is applied. Otherwise, the last implication
                // above is not correct (mod 2^256).
                invalidFraction := xor(mul(numerator, denominator), 1)
            }
            // Revert if the supplied numerator and denominator are not valid.
            if (invalidFraction) {
                _revertBadFraction();
            }
            // Return a placeholder orderHash and a fill fraction of 1/1.
            // The real orderHash will be returned by _getGeneratedOrder.
            return (bytes32(uint256(1)), 1, 1);
        }
        // Ensure numerator does not exceed denominator and is not zero.
        assembly {
            invalidFraction := or(gt(numerator, denominator), iszero(numerator))
        }
        // Revert if the supplied numerator and denominator are not valid.
        if (invalidFraction) {
            _revertBadFraction();
        }
        // If attempting partial fill (n < d) check order type & ensure support.
        if (
            _doesNotSupportPartialFills(
                orderParameters.orderType,
                numerator,
                denominator
            )
        ) {
            // Revert if partial fill was attempted on an unsupported order.
            _revertPartialFillsNotEnabledForOrder();
        }
        // Retrieve current counter & use it w/ parameters to derive order hash.
        orderHash = _assertConsiderationLengthAndGetOrderHash(orderParameters);
        // Retrieve the order status using the derived order hash.
        OrderStatus storage orderStatus = _orderStatus[orderHash];
        // Ensure order is fillable and is not cancelled.
        if (
            // Allow partially used orders to be filled.
            !_verifyOrderStatus(orderHash, orderStatus, false, revertOnInvalid)
        ) {
            // Assuming an invalid order status and no revert, return zero fill.
            return (orderHash, 0, 0);
        }
        // If the order is not already validated, verify the supplied signature.
        if (!orderStatus.isValidated) {
            _verifySignature(
                orderParameters.offerer,
                orderHash,
                advancedOrder.signature
            );
        }
        // Utilize assembly to determine the fraction to fill and update status.
        assembly {
            let orderStatusSlot := orderStatus.slot
            // Read filled amount as numerator and denominator and put on stack.
            let filledNumerator := sload(orderStatusSlot)
            let filledDenominator := shr(
                OrderStatus_filledDenominator_offset,
                filledNumerator
            )
            // "Loop" until the appropriate fill fraction has been determined.
            for {
            } 1 {
            } {
                // If no portion of the order has been filled yet...
                if iszero(filledDenominator) {
                    // fill the full supplied fraction.
                    filledNumerator := numerator
                    // Exit the "loop" early.
                    break
                }
                // Shift and mask to calculate the current filled numerator.
                filledNumerator := and(
                    shr(OrderStatus_filledNumerator_offset, filledNumerator),
                    MaxUint120
                )
                // If denominator of 1 supplied, fill entire remaining amount.
                if eq(denominator, 1) {
                    // Set the amount to fill to the remaining amount.
                    numerator := sub(filledDenominator, filledNumerator)
                    // Set the fill size to the current size.
                    denominator := filledDenominator
                    // Exit the "loop" early.
                    break
                }
                // If supplied denominator is equal to the current one:
                if eq(denominator, filledDenominator) {
                    // Increment the filled numerator by the new numerator.
                    filledNumerator := add(numerator, filledNumerator)
                    // Once adjusted, if current + supplied numerator exceeds
                    // the denominator:
                    let carry := mul(
                        sub(filledNumerator, denominator),
                        gt(filledNumerator, denominator)
                    )
                    // reduce the amount to fill by the excess.
                    numerator := sub(numerator, carry)
                    // Exit the "loop" early.
                    break
                }
                // Otherwise, if supplied denominator differs from current one:
                // Scale the filled amount up by the supplied size.
                filledNumerator := mul(filledNumerator, denominator)
                // Scale the supplied amount and size up by the current size.
                numerator := mul(numerator, filledDenominator)
                denominator := mul(denominator, filledDenominator)
                // Increment the filled numerator by the new numerator.
                filledNumerator := add(numerator, filledNumerator)
                // Once adjusted, if current + supplied numerator exceeds
                // denominator:
                let carry := mul(
                    sub(filledNumerator, denominator),
                    gt(filledNumerator, denominator)
                )
                // reduce the amount to fill by the excess.
                numerator := sub(numerator, carry)
                // Reduce the filled amount by the excess as well.
                filledNumerator := sub(filledNumerator, carry)
                // Check denominator for uint120 overflow.
                if gt(denominator, MaxUint120) {
                    // Derive greatest common divisor using euclidean algorithm.
                    function gcd(_a, _b) -> out {
                        // "Loop" until only one non-zero value remains.
                        for {
                        } _b {
                        } {
                            // Assign the second value to a temporary variable.
                            let _c := _b
                            // Derive the modulus of the two values.
                            _b := mod(_a, _c)
                            // Set the first value to the temporary value.
                            _a := _c
                        }
                        // Return the remaining non-zero value.
                        out := _a
                    }
                    // Determine the amount to scale down the fill fractions.
                    let scaleDown := gcd(
                        numerator,
                        gcd(filledNumerator, denominator)
                    )
                    // Ensure that the divisor is at least one.
                    let safeScaleDown := add(scaleDown, iszero(scaleDown))
                    // Scale fractional values down by gcd.
                    numerator := div(numerator, safeScaleDown)
                    denominator := div(denominator, safeScaleDown)
                    // Perform the overflow check a second time.
                    if gt(denominator, MaxUint120) {
                        // Store the Panic error signature.
                        mstore(0, Panic_error_selector)
                        // Store the arithmetic (0x11) panic code.
                        mstore(Panic_error_code_ptr, Panic_arithmetic)
                        // revert(abi.encodeWithSignature(
                        //     "Panic(uint256)", 0x11
                        // ))
                        revert(Error_selector_offset, Panic_error_length)
                    }
                }
                // Exit the "loop" now that all evaluation is complete.
                break
            }
        }
    }
    /**
     * @dev Internal function to update the status of an order by applying the
     *      supplied fill fraction to the remaining order fraction. If
     *      revertOnInvalid is true, the function will revert if the order is
     *      unavailable or if it is not possible to apply the supplied fill
     *      fraction to the remaining amount (e.g., if there is not enough
     *      of the order remaining to fill the supplied fraction, or if the
     *      fractions cannot be represented by two uint120 values).
     *
     * @param orderHash       The hash of the order.
     * @param numerator       The numerator of the fraction filled to write to
     *                        the order status.
     * @param denominator     The denominator of the fraction filled to write to
     *                        the order status.
     * @param revertOnInvalid Whether to revert if an order is already filled.
     */
    function _updateStatus(
        bytes32 orderHash,
        uint256 numerator,
        uint256 denominator,
        bool revertOnInvalid
    ) internal returns (bool) {
        // Retrieve the order status using the derived order hash.
        OrderStatus storage orderStatus = _orderStatus[orderHash];
        bool hasCarry = false;
        uint256 orderStatusSlot;
        uint256 filledNumerator;
        // Utilize assembly to determine the fraction to fill and update status.
        assembly {
            orderStatusSlot := orderStatus.slot
            // Read filled amount as numerator and denominator and put on stack.
            filledNumerator := sload(orderStatusSlot)
            let filledDenominator := shr(
                OrderStatus_filledDenominator_offset,
                filledNumerator
            )
            // "Loop" until the appropriate fill fraction has been determined.
            for {
            } 1 {
            } {
                // If no portion of the order has been filled yet...
                if iszero(filledDenominator) {
                    // fill the full supplied fraction.
                    filledNumerator := numerator
                    // Exit the "loop" early.
                    break
                }
                // Shift and mask to calculate the current filled numerator.
                filledNumerator := and(
                    shr(OrderStatus_filledNumerator_offset, filledNumerator),
                    MaxUint120
                )
                // If supplied denominator is equal to the current one:
                if eq(denominator, filledDenominator) {
                    // Increment the filled numerator by the new numerator.
                    filledNumerator := add(numerator, filledNumerator)
                    hasCarry := gt(filledNumerator, denominator)
                    // Exit the "loop" early.
                    break
                }
                // Otherwise, if supplied denominator differs from current one:
                // Scale the filled amount up by the supplied size.
                filledNumerator := mul(filledNumerator, denominator)
                // Scale the supplied amount and size up by the current size.
                numerator := mul(numerator, filledDenominator)
                denominator := mul(denominator, filledDenominator)
                // Increment the filled numerator by the new numerator.
                filledNumerator := add(numerator, filledNumerator)
                hasCarry := gt(filledNumerator, denominator)
                // Check filledNumerator and denominator for uint120 overflow.
                if or(
                    gt(filledNumerator, MaxUint120),
                    gt(denominator, MaxUint120)
                ) {
                    // Derive greatest common divisor using euclidean algorithm.
                    function gcd(_a, _b) -> out {
                        // "Loop" until only one non-zero value remains.
                        for {
                        } _b {
                        } {
                            // Assign the second value to a temporary variable.
                            let _c := _b
                            // Derive the modulus of the two values.
                            _b := mod(_a, _c)
                            // Set the first value to the temporary value.
                            _a := _c
                        }
                        // Return the remaining non-zero value.
                        out := _a
                    }
                    // Determine amount to scale down the new filled fraction.
                    let scaleDown := gcd(filledNumerator, denominator)
                    // Ensure that the divisor is at least one.
                    let safeScaleDown := add(scaleDown, iszero(scaleDown))
                    // Scale new filled fractional values down by gcd.
                    filledNumerator := div(filledNumerator, safeScaleDown)
                    denominator := div(denominator, safeScaleDown)
                    // Perform the overflow check a second time.
                    if or(
                        gt(filledNumerator, MaxUint120),
                        gt(denominator, MaxUint120)
                    ) {
                        // Store the Panic error signature.
                        mstore(0, Panic_error_selector)
                        // Store the arithmetic (0x11) panic code.
                        mstore(Panic_error_code_ptr, Panic_arithmetic)
                        // revert(abi.encodeWithSignature(
                        //     "Panic(uint256)", 0x11
                        // ))
                        revert(Error_selector_offset, Panic_error_length)
                    }
                }
                // Exit the "loop" now that all evaluation is complete.
                break
            }
        }
        if (hasCarry) {
            if (revertOnInvalid) {
                revert OrderAlreadyFilled(orderHash);
            } else {
                return false;
            }
        }
        assembly {
            // Update order status and fill amount, packing struct values.
            // [denominator: 15 bytes] [numerator: 15 bytes]
            // [isCancelled: 1 byte] [isValidated: 1 byte]
            sstore(
                orderStatusSlot,
                or(
                    OrderStatus_ValidatedAndNotCancelled,
                    or(
                        shl(
                            OrderStatus_filledNumerator_offset,
                            filledNumerator
                        ),
                        shl(OrderStatus_filledDenominator_offset, denominator)
                    )
                )
            )
        }
        return true;
    }
    /**
     * @dev Internal function to generate a contract order. When a
     *      collection-wide criteria-based item (criteria = 0) is provided as an
     *      input to a contract order, the contract offerer has full latitude to
     *      choose any identifier it wants mid-flight, which differs from the
     *      usual behavior.  For regular criteria-based orders with
     *      identifierOrCriteria = 0, the fulfiller can pick which identifier to
     *      receive by providing a CriteriaResolver. For contract offers with
     *      identifierOrCriteria = 0, Seaport does not expect a corresponding
     *      CriteriaResolver, and will revert if one is provided.
     *
     * @param orderParameters The parameters for the order.
     * @param context         The context for generating the order.
     * @param revertOnInvalid Whether to revert on invalid input.
     *
     * @return orderHash   The order hash.
     */
    function _getGeneratedOrder(
        OrderParameters memory orderParameters,
        bytes memory context,
        bool revertOnInvalid
    ) internal returns (bytes32 orderHash) {
        // Ensure that consideration array length is equal to the total original
        // consideration items value.
        if (
            orderParameters.consideration.length !=
            orderParameters.totalOriginalConsiderationItems
        ) {
            _revertConsiderationLengthNotEqualToTotalOriginal();
        }
        {
            address offerer = orderParameters.offerer;
            bool success;
            (MemoryPointer cdPtr, uint256 size) = _encodeGenerateOrder(
                orderParameters,
                context
            );
            assembly {
                success := call(gas(), offerer, 0, cdPtr, size, 0, 0)
            }
            {
                // Note: overflow impossible; nonce can't increment that high.
                uint256 contractNonce;
                unchecked {
                    // Note: nonce will be incremented even for skipped orders,
                    // and even if generateOrder's return data does not satisfy
                    // all the constraints. This is the case when errorBuffer
                    // != 0 and revertOnInvalid == false.
                    contractNonce = _contractNonces[offerer]++;
                }
                assembly {
                    // Shift offerer address up 96 bytes and combine with nonce.
                    orderHash := xor(
                        contractNonce,
                        shl(ContractOrder_orderHash_offerer_shift, offerer)
                    )
                }
            }
            // Revert or skip if the call to generate the contract order failed.
            if (!success) {
                if (revertOnInvalid) {
                    _revertWithReasonIfOneIsReturned();
                    _revertInvalidContractOrder(orderHash);
                }
                return bytes32(0);
            }
        }
        // From this point onward, do not allow for skipping orders as the
        // contract offerer may have modified state in expectation of any named
        // consideration items being sent to their designated recipients.
        // Decode the returned contract order and/or update the error buffer.
        (
            uint256 errorBuffer,
            OfferItem[] memory offer,
            ConsiderationItem[] memory consideration
        ) = _convertGetGeneratedOrderResult(_decodeGenerateOrderReturndata)(
                orderParameters.offer,
                orderParameters.consideration
            );
        // Revert if the returndata could not be decoded correctly.
        if (errorBuffer != 0) {
            _revertInvalidContractOrder(orderHash);
        }
        // Assign the returned offer item in place of the original item.
        orderParameters.offer = offer;
        // Assign returned consideration item in place of the original item.
        orderParameters.consideration = consideration;
        // Return the order hash.
        return orderHash;
    }
    /**
     * @dev Internal function to cancel an arbitrary number of orders. Note that
     *      only the offerer or the zone of a given order may cancel it. Callers
     *      should ensure that the intended order was cancelled by calling
     *      `getOrderStatus` and confirming that `isCancelled` returns `true`.
     *      Also note that contract orders are not cancellable.
     *
     * @param orders The orders to cancel.
     *
     * @return cancelled A boolean indicating whether the supplied orders were
     *                   successfully cancelled.
     */
    function _cancel(
        OrderComponents[] calldata orders
    ) internal returns (bool cancelled) {
        // Ensure that the reentrancy guard is not currently set.
        _assertNonReentrant();
        // Declare variables outside of the loop.
        OrderStatus storage orderStatus;
        // Declare a variable for tracking invariants in the loop.
        bool anyInvalidCallerOrContractOrder;
        // Skip overflow check as for loop is indexed starting at zero.
        unchecked {
            // Read length of the orders array from memory and place on stack.
            uint256 totalOrders = orders.length;
            // Iterate over each order.
            for (uint256 i = 0; i < totalOrders; ) {
                // Retrieve the order.
                OrderComponents calldata order = orders[i];
                address offerer = order.offerer;
                address zone = order.zone;
                OrderType orderType = order.orderType;
                assembly {
                    // If caller is neither the offerer nor zone, or a contract
                    // order is present, flag anyInvalidCallerOrContractOrder.
                    anyInvalidCallerOrContractOrder := or(
                        anyInvalidCallerOrContractOrder,
                        // orderType == CONTRACT ||
                        // !(caller == offerer || caller == zone)
                        or(
                            eq(orderType, 4),
                            iszero(
                                or(eq(caller(), offerer), eq(caller(), zone))
                            )
                        )
                    )
                }
                bytes32 orderHash = _deriveOrderHash(
                    _toOrderParametersReturnType(
                        _decodeOrderComponentsAsOrderParameters
                    )(order.toCalldataPointer()),
                    order.counter
                );
                // Retrieve the order status using the derived order hash.
                orderStatus = _orderStatus[orderHash];
                // Update the order status as not valid and cancelled.
                orderStatus.isValidated = false;
                orderStatus.isCancelled = true;
                // Emit an event signifying that the order has been cancelled.
                emit OrderCancelled(orderHash, offerer, zone);
                // Increment counter inside body of loop for gas efficiency.
                ++i;
            }
        }
        if (anyInvalidCallerOrContractOrder) {
            _revertCannotCancelOrder();
        }
        // Return a boolean indicating that orders were successfully cancelled.
        cancelled = true;
    }
    /**
     * @dev Internal function to validate an arbitrary number of orders, thereby
     *      registering their signatures as valid and allowing the fulfiller to
     *      skip signature verification on fulfillment. Note that validated
     *      orders may still be unfulfillable due to invalid item amounts or
     *      other factors; callers should determine whether validated orders are
     *      fulfillable by simulating the fulfillment call prior to execution.
     *      Also note that anyone can validate a signed order, but only the
     *      offerer can validate an order without supplying a signature.
     *
     * @param orders The orders to validate.
     *
     * @return validated A boolean indicating whether the supplied orders were
     *                   successfully validated.
     */
    function _validate(
        Order[] memory orders
    ) internal returns (bool validated) {
        // Ensure that the reentrancy guard is not currently set.
        _assertNonReentrant();
        // Declare variables outside of the loop.
        OrderStatus storage orderStatus;
        bytes32 orderHash;
        address offerer;
        // Skip overflow check as for loop is indexed starting at zero.
        unchecked {
            // Read length of the orders array from memory and place on stack.
            uint256 totalOrders = orders.length;
            // Iterate over each order.
            for (uint256 i = 0; i < totalOrders; ++i) {
                // Retrieve the order.
                Order memory order = orders[i];
                // Retrieve the order parameters.
                OrderParameters memory orderParameters = order.parameters;
                // Skip contract orders.
                if (orderParameters.orderType == OrderType.CONTRACT) {
                    continue;
                }
                // Move offerer from memory to the stack.
                offerer = orderParameters.offerer;
                // Get current counter & use it w/ params to derive order hash.
                orderHash = _assertConsiderationLengthAndGetOrderHash(
                    orderParameters
                );
                // Retrieve the order status using the derived order hash.
                orderStatus = _orderStatus[orderHash];
                // Ensure order is fillable and retrieve the filled amount.
                _verifyOrderStatus(
                    orderHash,
                    orderStatus,
                    false, // Signifies that partially filled orders are valid.
                    _runTimeConstantTrue() // Revert if order is invalid.
                );
                // If the order has not already been validated...
                if (!orderStatus.isValidated) {
                    // Ensure that consideration array length is equal to the
                    // total original consideration items value.
                    if (
                        orderParameters.consideration.length !=
                        orderParameters.totalOriginalConsiderationItems
                    ) {
                        _revertConsiderationLengthNotEqualToTotalOriginal();
                    }
                    // Verify the supplied signature.
                    _verifySignature(offerer, orderHash, order.signature);
                    // Update order status to mark the order as valid.
                    orderStatus.isValidated = true;
                    // Emit an event signifying the order has been validated.
                    emit OrderValidated(orderHash, orderParameters);
                }
            }
        }
        // Return a boolean indicating that orders were successfully validated.
        validated = true;
    }
    /**
     * @dev Internal view function to retrieve the status of a given order by
     *      hash, including whether the order has been cancelled or validated
     *      and the fraction of the order that has been filled.
     *
     * @param orderHash The order hash in question.
     *
     * @return isValidated A boolean indicating whether the order in question
     *                     has been validated (i.e. previously approved or
     *                     partially filled).
     * @return isCancelled A boolean indicating whether the order in question
     *                     has been cancelled.
     * @return totalFilled The total portion of the order that has been filled
     *                     (i.e. the "numerator").
     * @return totalSize   The total size of the order that is either filled or
     *                     unfilled (i.e. the "denominator").
     */
    function _getOrderStatus(
        bytes32 orderHash
    )
        internal
        view
        returns (
            bool isValidated,
            bool isCancelled,
            uint256 totalFilled,
            uint256 totalSize
        )
    {
        // Retrieve the order status using the order hash.
        OrderStatus storage orderStatus = _orderStatus[orderHash];
        // Return the fields on the order status.
        return (
            orderStatus.isValidated,
            orderStatus.isCancelled,
            orderStatus.numerator,
            orderStatus.denominator
        );
    }
    /**
     * @dev Internal pure function to check whether a given order type indicates
     *      that partial fills are not supported (e.g. only "full fills" are
     *      allowed for the order in question).
     *
     * @param orderType   The order type in question.
     * @param numerator   The numerator in question.
     * @param denominator The denominator in question.
     *
     * @return isFullOrder A boolean indicating whether the order type only
     *                     supports full fills.
     */
    function _doesNotSupportPartialFills(
        OrderType orderType,
        uint256 numerator,
        uint256 denominator
    ) internal pure returns (bool isFullOrder) {
        // The "full" order types are even, while "partial" order types are odd.
        // Bitwise and by 1 is equivalent to modulo by 2, but 2 gas cheaper. The
        // check is only necessary if numerator is less than denominator.
        assembly {
            // Equivalent to `uint256(orderType) & 1 == 0`.
            isFullOrder := and(
                lt(numerator, denominator),
                iszero(and(orderType, 1))
            )
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import { Side } from "../lib/ConsiderationEnums.sol";
/**
 * @title CriteriaResolutionErrors
 * @author 0age
 * @notice CriteriaResolutionErrors contains all errors related to criteria
 *         resolution.
 */
interface CriteriaResolutionErrors {
    /**
     * @dev Revert with an error when providing a criteria resolver that refers
     *      to an order that has not been supplied.
     *
     * @param side The side of the order that was not supplied.
     */
    error OrderCriteriaResolverOutOfRange(Side side);
    /**
     * @dev Revert with an error if an offer item still has unresolved criteria
     *      after applying all criteria resolvers.
     *
     * @param orderIndex The index of the order that contains the offer item.
     * @param offerIndex The index of the offer item that still has unresolved
     *                   criteria.
     */
    error UnresolvedOfferCriteria(uint256 orderIndex, uint256 offerIndex);
    /**
     * @dev Revert with an error if a consideration item still has unresolved
     *      criteria after applying all criteria resolvers.
     *
     * @param orderIndex         The index of the order that contains the
     *                           consideration item.
     * @param considerationIndex The index of the consideration item that still
     *                           has unresolved criteria.
     */
    error UnresolvedConsiderationCriteria(
        uint256 orderIndex,
        uint256 considerationIndex
    );
    /**
     * @dev Revert with an error when providing a criteria resolver that refers
     *      to an order with an offer item that has not been supplied.
     */
    error OfferCriteriaResolverOutOfRange();
    /**
     * @dev Revert with an error when providing a criteria resolver that refers
     *      to an order with a consideration item that has not been supplied.
     */
    error ConsiderationCriteriaResolverOutOfRange();
    /**
     * @dev Revert with an error when providing a criteria resolver that refers
     *      to an order with an item that does not expect a criteria to be
     *      resolved.
     */
    error CriteriaNotEnabledForItem();
    /**
     * @dev Revert with an error when providing a criteria resolver that
     *      contains an invalid proof with respect to the given item and
     *      chosen identifier.
     */
    error InvalidProof();
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/**
 * @title AmountDerivationErrors
 * @author 0age
 * @notice AmountDerivationErrors contains errors related to amount derivation.
 */
interface AmountDerivationErrors {
    /**
     * @dev Revert with an error when attempting to apply a fraction as part of
     *      a partial fill that does not divide the target amount cleanly.
     */
    error InexactFraction();
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ConduitInterface
} from "seaport-types/src/interfaces/ConduitInterface.sol";
import {
    ConduitItemType
} from "seaport-types/src/conduit/lib/ConduitEnums.sol";
import { ItemType } from "seaport-types/src/lib/ConsiderationEnums.sol";
import { ReceivedItem } from "seaport-types/src/lib/ConsiderationStructs.sol";
import { Verifiers } from "./Verifiers.sol";
import { TokenTransferrer } from "./TokenTransferrer.sol";
import {
    Accumulator_array_length_ptr,
    Accumulator_array_offset_ptr,
    Accumulator_array_offset,
    Accumulator_conduitKey_ptr,
    Accumulator_itemSizeOffsetDifference,
    Accumulator_selector_ptr,
    AccumulatorArmed,
    AccumulatorDisarmed,
    Conduit_transferItem_amount_ptr,
    Conduit_transferItem_from_ptr,
    Conduit_transferItem_identifier_ptr,
    Conduit_transferItem_size,
    Conduit_transferItem_to_ptr,
    Conduit_transferItem_token_ptr,
    FreeMemoryPointerSlot,
    OneWord,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    Error_selector_offset,
    NativeTokenTransferGenericFailure_error_account_ptr,
    NativeTokenTransferGenericFailure_error_amount_ptr,
    NativeTokenTransferGenericFailure_error_length,
    NativeTokenTransferGenericFailure_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
import {
    _revertInvalidCallToConduit,
    _revertInvalidConduit,
    _revertInvalidERC721TransferAmount,
    _revertUnusedItemParameters
} from "seaport-types/src/lib/ConsiderationErrors.sol";
/**
 * @title Executor
 * @author 0age
 * @notice Executor contains functions related to processing executions (i.e.
 *         transferring items, either directly or via conduits).
 */
contract Executor is Verifiers, TokenTransferrer {
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) Verifiers(conduitController) {}
    /**
     * @dev Internal function to transfer a given item, either directly or via
     *      a corresponding conduit.
     *
     * @param item        The item to transfer, including an amount and a
     *                    recipient.
     * @param from        The account supplying the item.
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _transfer(
        ReceivedItem memory item,
        address from,
        bytes32 conduitKey,
        bytes memory accumulator
    ) internal {
        // If the item type indicates Ether or a native token...
        if (item.itemType == ItemType.NATIVE) {
            // Ensure neither the token nor the identifier parameters are set.
            if ((uint160(item.token) | item.identifier) != 0) {
                _revertUnusedItemParameters();
            }
            // transfer the native tokens to the recipient.
            _transferNativeTokens(item.recipient, item.amount);
        } else if (item.itemType == ItemType.ERC20) {
            // Ensure that no identifier is supplied.
            if (item.identifier != 0) {
                _revertUnusedItemParameters();
            }
            // Transfer ERC20 tokens from the source to the recipient.
            _transferERC20(
                item.token,
                from,
                item.recipient,
                item.amount,
                conduitKey,
                accumulator
            );
        } else if (item.itemType == ItemType.ERC721) {
            // Transfer ERC721 token from the source to the recipient.
            _transferERC721(
                item.token,
                from,
                item.recipient,
                item.identifier,
                item.amount,
                conduitKey,
                accumulator
            );
        } else {
            // Transfer ERC1155 token from the source to the recipient.
            _transferERC1155(
                item.token,
                from,
                item.recipient,
                item.identifier,
                item.amount,
                conduitKey,
                accumulator
            );
        }
    }
    /**
     * @dev Internal function to transfer Ether or other native tokens to a
     *      given recipient.
     *
     * @param to     The recipient of the transfer.
     * @param amount The amount to transfer.
     */
    function _transferNativeTokens(
        address payable to,
        uint256 amount
    ) internal {
        // Ensure that the supplied amount is non-zero.
        _assertNonZeroAmount(amount);
        // Declare a variable indicating whether the call was successful or not.
        bool success;
        assembly {
            // Transfer the native token and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }
        // If the call fails...
        if (!success) {
            // Revert and pass the revert reason along if one was returned.
            _revertWithReasonIfOneIsReturned();
            // Otherwise, revert with a generic error message.
            assembly {
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, NativeTokenTransferGenericFailure_error_selector)
                // Write `to` and `amount` arguments.
                mstore(NativeTokenTransferGenericFailure_error_account_ptr, to)
                mstore(
                    NativeTokenTransferGenericFailure_error_amount_ptr,
                    amount
                )
                // revert(abi.encodeWithSignature(
                //     "NativeTokenTransferGenericFailure(address,uint256)",
                //     to,
                //     amount
                // ))
                revert(
                    Error_selector_offset,
                    NativeTokenTransferGenericFailure_error_length
                )
            }
        }
    }
    /**
     * @dev Internal function to transfer ERC20 tokens from a given originator
     *      to a given recipient using a given conduit if applicable. Sufficient
     *      approvals must be set on this contract or on a respective conduit.
     *
     * @param token       The ERC20 token to transfer.
     * @param from        The originator of the transfer.
     * @param to          The recipient of the transfer.
     * @param amount      The amount to transfer.
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _transferERC20(
        address token,
        address from,
        address to,
        uint256 amount,
        bytes32 conduitKey,
        bytes memory accumulator
    ) internal {
        // Ensure that the supplied amount is non-zero.
        _assertNonZeroAmount(amount);
        // Trigger accumulated transfers if the conduits differ.
        _triggerIfArmedAndNotAccumulatable(accumulator, conduitKey);
        // If no conduit has been specified...
        if (conduitKey == bytes32(0)) {
            // Perform the token transfer directly.
            _performERC20Transfer(token, from, to, amount);
        } else {
            // Insert the call to the conduit into the accumulator.
            _insert(
                conduitKey,
                accumulator,
                ConduitItemType.ERC20,
                token,
                from,
                to,
                uint256(0),
                amount
            );
        }
    }
    /**
     * @dev Internal function to transfer a single ERC721 token from a given
     *      originator to a given recipient. Sufficient approvals must be set,
     *      either on the respective conduit or on this contract itself.
     *
     * @param token       The ERC721 token to transfer.
     * @param from        The originator of the transfer.
     * @param to          The recipient of the transfer.
     * @param identifier  The tokenId to transfer.
     * @param amount      The amount to transfer (must be 1 for ERC721).
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _transferERC721(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount,
        bytes32 conduitKey,
        bytes memory accumulator
    ) internal {
        // Trigger accumulated transfers if the conduits differ.
        _triggerIfArmedAndNotAccumulatable(accumulator, conduitKey);
        // If no conduit has been specified...
        if (conduitKey == bytes32(0)) {
            // Ensure that exactly one 721 item is being transferred.
            if (amount != 1) {
                _revertInvalidERC721TransferAmount(amount);
            }
            // Perform transfer via the token contract directly.
            _performERC721Transfer(token, from, to, identifier);
        } else {
            // Insert the call to the conduit into the accumulator.
            _insert(
                conduitKey,
                accumulator,
                ConduitItemType.ERC721,
                token,
                from,
                to,
                identifier,
                amount
            );
        }
    }
    /**
     * @dev Internal function to transfer ERC1155 tokens from a given originator
     *      to a given recipient. Sufficient approvals must be set, either on
     *      the respective conduit or on this contract itself.
     *
     * @param token       The ERC1155 token to transfer.
     * @param from        The originator of the transfer.
     * @param to          The recipient of the transfer.
     * @param identifier  The id to transfer.
     * @param amount      The amount to transfer.
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _transferERC1155(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount,
        bytes32 conduitKey,
        bytes memory accumulator
    ) internal {
        // Ensure that the supplied amount is non-zero.
        _assertNonZeroAmount(amount);
        // Trigger accumulated transfers if the conduits differ.
        _triggerIfArmedAndNotAccumulatable(accumulator, conduitKey);
        // If no conduit has been specified...
        if (conduitKey == bytes32(0)) {
            // Perform transfer via the token contract directly.
            _performERC1155Transfer(token, from, to, identifier, amount);
        } else {
            // Insert the call to the conduit into the accumulator.
            _insert(
                conduitKey,
                accumulator,
                ConduitItemType.ERC1155,
                token,
                from,
                to,
                identifier,
                amount
            );
        }
    }
    /**
     * @dev Internal function to trigger a call to the conduit currently held by
     *      the accumulator if the accumulator contains item transfers (i.e. it
     *      is "armed") and the supplied conduit key does not match the key held
     *      by the accumulator.
     *
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     */
    function _triggerIfArmedAndNotAccumulatable(
        bytes memory accumulator,
        bytes32 conduitKey
    ) internal {
        // Retrieve the current conduit key from the accumulator.
        bytes32 accumulatorConduitKey = _getAccumulatorConduitKey(accumulator);
        // Perform conduit call if the set key does not match the supplied key.
        if (accumulatorConduitKey != conduitKey) {
            _triggerIfArmed(accumulator);
        }
    }
    /**
     * @dev Internal function to trigger a call to the conduit currently held by
     *      the accumulator if the accumulator contains item transfers (i.e. it
     *      is "armed").
     *
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _triggerIfArmed(bytes memory accumulator) internal {
        // Exit if the accumulator is not "armed".
        if (accumulator.length != AccumulatorArmed) {
            return;
        }
        // Retrieve the current conduit key from the accumulator.
        bytes32 accumulatorConduitKey = _getAccumulatorConduitKey(accumulator);
        // Perform conduit call.
        _trigger(accumulatorConduitKey, accumulator);
    }
    /**
     * @dev Internal function to trigger a call to the conduit corresponding to
     *      a given conduit key, supplying all accumulated item transfers. The
     *      accumulator will be "disarmed" and reset in the process.
     *
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     */
    function _trigger(bytes32 conduitKey, bytes memory accumulator) internal {
        // Declare variables for offset in memory & size of calldata to conduit.
        uint256 callDataOffset;
        uint256 callDataSize;
        // Call the conduit with all the accumulated transfers.
        assembly {
            // Call begins at third word; the first is length or "armed" status,
            // and the second is the current conduit key.
            callDataOffset := add(accumulator, TwoWords)
            // 68 + items * 192
            callDataSize := add(
                Accumulator_array_offset_ptr,
                mul(
                    mload(add(accumulator, Accumulator_array_length_ptr)),
                    Conduit_transferItem_size
                )
            )
        }
        // Call conduit derived from conduit key & supply accumulated transfers.
        _callConduitUsingOffsets(conduitKey, callDataOffset, callDataSize);
        // Reset accumulator length to signal that it is now "disarmed".
        assembly {
            mstore(accumulator, AccumulatorDisarmed)
        }
    }
    /**
     * @dev Internal function to perform a call to the conduit corresponding to
     *      a given conduit key based on the offset and size of the calldata in
     *      question in memory.
     *
     * @param conduitKey     A bytes32 value indicating what corresponding
     *                       conduit, if any, to source token approvals from.
     *                       The zero hash signifies that no conduit should be
     *                       used, with direct approvals set on this contract.
     * @param callDataOffset The memory pointer where calldata is contained.
     * @param callDataSize   The size of calldata in memory.
     */
    function _callConduitUsingOffsets(
        bytes32 conduitKey,
        uint256 callDataOffset,
        uint256 callDataSize
    ) internal {
        // Derive the address of the conduit using the conduit key.
        address conduit = _deriveConduit(conduitKey);
        bool success;
        bytes4 result;
        // call the conduit.
        assembly {
            // Ensure first word of scratch space is empty.
            mstore(0, 0)
            // Perform call, placing first word of return data in scratch space.
            success := call(
                gas(),
                conduit,
                0,
                callDataOffset,
                callDataSize,
                0,
                OneWord
            )
            // Take value from scratch space and place it on the stack.
            result := mload(0)
        }
        // If the call failed...
        if (!success) {
            // Pass along whatever revert reason was given by the conduit.
            _revertWithReasonIfOneIsReturned();
            // Otherwise, revert with a generic error.
            _revertInvalidCallToConduit(conduit);
        }
        // Ensure result was extracted and matches magic value.
        if (result != ConduitInterface.execute.selector) {
            _revertInvalidConduit(conduitKey, conduit);
        }
    }
    /**
     * @dev Internal pure function to retrieve the current conduit key set for
     *      the accumulator.
     *
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     *
     * @return accumulatorConduitKey The conduit key currently set for the
     *                               accumulator.
     */
    function _getAccumulatorConduitKey(
        bytes memory accumulator
    ) internal pure returns (bytes32 accumulatorConduitKey) {
        // Retrieve the current conduit key from the accumulator.
        assembly {
            accumulatorConduitKey := mload(
                add(accumulator, Accumulator_conduitKey_ptr)
            )
        }
    }
    /**
     * @dev Internal pure function to place an item transfer into an accumulator
     *      that collects a series of transfers to execute against a given
     *      conduit in a single call.
     *
     * @param conduitKey  A bytes32 value indicating what corresponding conduit,
     *                    if any, to source token approvals from. The zero hash
     *                    signifies that no conduit should be used, with direct
     *                    approvals set on this contract.
     * @param accumulator An open-ended array that collects transfers to execute
     *                    against a given conduit in a single call.
     * @param itemType    The type of the item to transfer.
     * @param token       The token to transfer.
     * @param from        The originator of the transfer.
     * @param to          The recipient of the transfer.
     * @param identifier  The tokenId to transfer.
     * @param amount      The amount to transfer.
     */
    function _insert(
        bytes32 conduitKey,
        bytes memory accumulator,
        ConduitItemType itemType,
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    ) internal pure {
        uint256 elements;
        // "Arm" and prime accumulator if it's not already armed. The sentinel
        // value is held in the length of the accumulator array.
        if (accumulator.length == AccumulatorDisarmed) {
            elements = 1;
            bytes4 selector = ConduitInterface.execute.selector;
            assembly {
                mstore(accumulator, AccumulatorArmed) // "arm" the accumulator.
                mstore(add(accumulator, Accumulator_conduitKey_ptr), conduitKey)
                mstore(add(accumulator, Accumulator_selector_ptr), selector)
                mstore(
                    add(accumulator, Accumulator_array_offset_ptr),
                    Accumulator_array_offset
                )
                mstore(add(accumulator, Accumulator_array_length_ptr), elements)
            }
        } else {
            // Otherwise, increase the number of elements by one.
            assembly {
                elements := add(
                    mload(add(accumulator, Accumulator_array_length_ptr)),
                    1
                )
                mstore(add(accumulator, Accumulator_array_length_ptr), elements)
            }
        }
        // Insert the item.
        assembly {
            let itemPointer := sub(
                add(accumulator, mul(elements, Conduit_transferItem_size)),
                Accumulator_itemSizeOffsetDifference
            )
            mstore(itemPointer, itemType)
            mstore(add(itemPointer, Conduit_transferItem_token_ptr), token)
            mstore(add(itemPointer, Conduit_transferItem_from_ptr), from)
            mstore(add(itemPointer, Conduit_transferItem_to_ptr), to)
            mstore(
                add(itemPointer, Conduit_transferItem_identifier_ptr),
                identifier
            )
            mstore(add(itemPointer, Conduit_transferItem_amount_ptr), amount)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import { OrderType } from "seaport-types/src/lib/ConsiderationEnums.sol";
import {
    AdvancedOrder,
    BasicOrderParameters,
    OrderParameters
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {
    ZoneInteractionErrors
} from "seaport-types/src/interfaces/ZoneInteractionErrors.sol";
import { LowLevelHelpers } from "./LowLevelHelpers.sol";
import { ConsiderationEncoder } from "./ConsiderationEncoder.sol";
import {
    CalldataPointer,
    MemoryPointer,
    OffsetOrLengthMask,
    ZeroSlotPtr
} from "seaport-types/src/helpers/PointerLibraries.sol";
import {
    authorizeOrder_selector_offset,
    BasicOrder_zone_cdPtr,
    ContractOrder_orderHash_offerer_shift,
    MaskOverFirstFourBytes,
    OneWord,
    OrderParameters_salt_offset,
    OrderParameters_zone_offset,
    validateOrder_selector_offset
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    Error_selector_offset,
    InvalidContractOrder_error_selector,
    InvalidRestrictedOrder_error_length,
    InvalidRestrictedOrder_error_orderHash_ptr,
    InvalidRestrictedOrder_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
/**
 * @title ZoneInteraction
 * @author 0age
 * @notice ZoneInteraction contains logic related to interacting with zones.
 */
contract ZoneInteraction is
    ConsiderationEncoder,
    ZoneInteractionErrors,
    LowLevelHelpers
{
    /**
     * @dev Internal function to determine if an order has a restricted order
     *      type and, if so, to ensure that either the zone is the caller or
     *      that a call to `validateOrder` on the zone returns a magic value
     *      indicating that the order is currently valid. Note that contract
     *      orders are not accessible via the basic fulfillment method.
     *
     * @param orderHash  The hash of the order.
     * @param orderType  The order type.
     */
    function _assertRestrictedBasicOrderAuthorization(
        bytes32 orderHash,
        OrderType orderType
    ) internal returns (uint256 callDataPointer) {
        // Order type 2-3 require zone be caller or zone to approve.
        // Note that in cases where fulfiller == zone, the restricted order
        // validation will be skipped.
        if (
            _isRestrictedAndCallerNotZone(
                orderType,
                CalldataPointer.wrap(BasicOrder_zone_cdPtr).readAddress()
            )
        ) {
            // Encode the `authorizeOrder` call in memory.
            (
                MemoryPointer callData,
                uint256 size,
                uint256 memoryLocationForOrderHashes
            ) = _encodeAuthorizeBasicOrder(orderHash);
            // Write the error selector to memory at the zero slot where it can
            // be used to revert with a specific error message.
            ZeroSlotPtr.write(InvalidRestrictedOrder_error_selector);
            // Perform `authorizeOrder` call & ensure magic value was returned.
            _callAndCheckStatus(
                CalldataPointer.wrap(BasicOrder_zone_cdPtr).readAddress(),
                orderHash,
                callData.offset(authorizeOrder_selector_offset),
                size
            );
            // Restore the zero slot.
            ZeroSlotPtr.write(0);
            // Register the calldata pointer for the encoded calldata.
            callDataPointer = MemoryPointer.unwrap(callData);
            // Utilize unchecked logic as size value cannot be so large as to
            // cause an overflow.
            unchecked {
                // Write the packed encoding of size and memory location for
                // order hashes to memory at the head of the encoded calldata.
                callData.write(
                    ((size + OneWord) << 128) | memoryLocationForOrderHashes
                );
            }
        }
    }
    /**
     * @dev Internal function to determine if an order has a restricted order
     *      type and, if so, to ensure that either the zone is the caller or
     *      that a call to `validateOrder` on the zone returns a magic value
     *      indicating that the order is currently valid. Note that contract
     *      orders are not accessible via the basic fulfillment method.
     *
     * @param orderHash   The hash of the order.
     * @param orderType   The order type.
     * @param callDataPtr The pointer to the call data for the basic order.
     *                    Note that the initial value will contain the size
     *                    and the memory location for order hashes length.
     */
    function _assertRestrictedBasicOrderValidity(
        bytes32 orderHash,
        OrderType orderType,
        uint256 callDataPtr
    ) internal {
        // Order type 2-3 require zone be caller or zone to approve.
        // Note that in cases where fulfiller == zone, the restricted order
        // validation will be skipped.
        if (
            _isRestrictedAndCallerNotZone(
                orderType,
                CalldataPointer.wrap(BasicOrder_zone_cdPtr).readAddress()
            )
        ) {
            // Cast the call data pointer to a memory pointer.
            MemoryPointer callData = MemoryPointer.wrap(callDataPtr);
            // Retrieve the size and memory location for order hashes from the
            // head of the encoded calldata where it was previously written.
            uint256 sizeAndMemoryLocationForOrderHashes = (
                callData.readUint256()
            );
            // Split the packed encoding to retrieve size and memory location.
            uint256 size = sizeAndMemoryLocationForOrderHashes >> 128;
            uint256 memoryLocationForOrderHashes = (
                sizeAndMemoryLocationForOrderHashes & OffsetOrLengthMask
            );
            // Encode the `validateOrder` call in memory.
            _encodeValidateBasicOrder(callData, memoryLocationForOrderHashes);
            // Account for the offset of the selector in the encoded call data.
            callData = callData.offset(validateOrder_selector_offset);
            // Write the error selector to memory at the zero slot where it can
            // be used to revert with a specific error message.
            ZeroSlotPtr.write(InvalidRestrictedOrder_error_selector);
            // Perform `validateOrder` call and ensure magic value was returned.
            _callAndCheckStatus(
                CalldataPointer.wrap(BasicOrder_zone_cdPtr).readAddress(),
                orderHash,
                callData,
                size
            );
            // Restore the zero slot.
            ZeroSlotPtr.write(0);
        }
    }
    /**
     * @dev Internal function to determine the pre-execution validity of
     *      restricted orders, signaling whether or not the order is valid.
     *      Restricted orders where the caller is not the zone must
     *      successfully call `authorizeOrder` with the correct magic value
     *      returned.
     *
     * @param advancedOrder   The advanced order in question.
     * @param orderHashes     The order hashes of each order included as part
     *                        of the current fulfillment.
     * @param orderHash       The hash of the order.
     * @param orderIndex      The index of the order.
     * @param revertOnInvalid Whether to revert if the call is invalid.
     *
     * @return isValid True if the order is valid, false otherwise (unless
     *                 revertOnInvalid is true, in which case this function
     *                 will revert).
     */
    function _checkRestrictedAdvancedOrderAuthorization(
        AdvancedOrder memory advancedOrder,
        bytes32[] memory orderHashes,
        bytes32 orderHash,
        uint256 orderIndex,
        bool revertOnInvalid
    ) internal returns (bool isValid) {
        // Retrieve the parameters of the order in question.
        OrderParameters memory parameters = advancedOrder.parameters;
        // OrderType 2-3 require zone to be caller or approve via validateOrder.
        if (
            _isRestrictedAndCallerNotZone(parameters.orderType, parameters.zone)
        ) {
            // Encode the `validateOrder` call in memory.
            (MemoryPointer callData, uint256 size) = _encodeAuthorizeOrder(
                orderHash,
                parameters,
                advancedOrder.extraData,
                orderHashes,
                orderIndex
            );
            // Perform call and ensure a corresponding magic value was returned.
            return
                _callAndCheckStatusWithSkip(
                    parameters.zone,
                    orderHash,
                    callData,
                    size,
                    InvalidRestrictedOrder_error_selector,
                    revertOnInvalid
                );
        }
        return true;
    }
    /**
     * @dev Internal function to determine the pre-execution validity of
     *      restricted orders and to revert if the order is invalid.
     *      Restricted orders where the caller is not the zone must
     *      successfully call `authorizeOrder` with the correct magic value
     *      returned.
     *
     * @param advancedOrder   The advanced order in question.
     * @param orderHashes     The order hashes of each order included as part
     *                        of the current fulfillment.
     * @param orderHash       The hash of the order.
     * @param orderIndex      The index of the order.
     */
    function _assertRestrictedAdvancedOrderAuthorization(
        AdvancedOrder memory advancedOrder,
        bytes32[] memory orderHashes,
        bytes32 orderHash,
        uint256 orderIndex
    ) internal {
        // Retrieve the parameters of the order in question.
        OrderParameters memory parameters = advancedOrder.parameters;
        // OrderType 2-3 requires zone to call or approve via authorizeOrder.
        if (
            _isRestrictedAndCallerNotZone(parameters.orderType, parameters.zone)
        ) {
            // Encode the `authorizeOrder` call in memory.
            (MemoryPointer callData, uint256 size) = _encodeAuthorizeOrder(
                orderHash,
                parameters,
                advancedOrder.extraData,
                orderHashes,
                orderIndex
            );
            // Write the error selector to memory at the zero slot where it can
            // be used to revert with a specific error message.
            ZeroSlotPtr.write(InvalidRestrictedOrder_error_selector);
            // Perform call and ensure a corresponding magic value was returned.
            _callAndCheckStatus(parameters.zone, orderHash, callData, size);
            // Restore the zero slot.
            ZeroSlotPtr.write(0);
        }
    }
    /**
     * @dev Internal function to determine the post-execution validity of
     *      restricted and contract orders. Restricted orders where the caller
     *      is not the zone must successfully call `validateOrder` with the
     *      correct magic value returned. Contract orders must successfully call
     *      `ratifyOrder` with the correct magic value returned.
     *
     * @param advancedOrder The advanced order in question.
     * @param orderHashes   The order hashes of each order included as part of
     *                      the current fulfillment.
     * @param orderHash     The hash of the order.
     */
    function _assertRestrictedAdvancedOrderValidity(
        AdvancedOrder memory advancedOrder,
        bytes32[] memory orderHashes,
        bytes32 orderHash
    ) internal {
        // Declare variables that will be assigned based on the order type.
        address target;
        uint256 errorSelector;
        MemoryPointer callData;
        uint256 size;
        // Retrieve the parameters of the order in question.
        OrderParameters memory parameters = advancedOrder.parameters;
        // OrderType 2-3 require zone to be caller or approve via validateOrder.
        if (
            _isRestrictedAndCallerNotZone(parameters.orderType, parameters.zone)
        ) {
            // Encode the `validateOrder` call in memory.
            (callData, size) = _encodeValidateOrder(
                parameters
                    .toMemoryPointer()
                    .offset(OrderParameters_salt_offset)
                    .readUint256(),
                orderHashes
            );
            // Set the target to the zone.
            target = (
                parameters
                    .toMemoryPointer()
                    .offset(OrderParameters_zone_offset)
                    .readAddress()
            );
            // Set the restricted-order-specific error selector.
            errorSelector = InvalidRestrictedOrder_error_selector;
        } else if (parameters.orderType == OrderType.CONTRACT) {
            // Set the target to the offerer (note the offerer has no offset).
            target = parameters.toMemoryPointer().readAddress();
            // Shift the target 96 bits to the left.
            uint256 shiftedOfferer;
            assembly {
                shiftedOfferer := shl(
                    ContractOrder_orderHash_offerer_shift,
                    target
                )
            }
            // Encode the `ratifyOrder` call in memory.
            (callData, size) = _encodeRatifyOrder(
                orderHash,
                parameters,
                advancedOrder.extraData,
                orderHashes,
                shiftedOfferer
            );
            // Set the contract-order-specific error selector.
            errorSelector = InvalidContractOrder_error_selector;
        } else {
            return;
        }
        // Write the error selector to memory at the zero slot where it can be
        // used to revert with a specific error message.
        ZeroSlotPtr.write(errorSelector);
        // Perform call and ensure a corresponding magic value was returned.
        _callAndCheckStatus(target, orderHash, callData, size);
        // Restore the zero slot.
        ZeroSlotPtr.write(0);
    }
    /**
     * @dev Determines whether the specified order type is restricted and the
     *      caller is not the specified zone.
     *
     * @param orderType     The type of the order to check.
     * @param zone          The address of the zone to check against.
     *
     * @return mustValidate True if the order type is restricted and the caller
     *                      is not the specified zone, false otherwise.
     */
    function _isRestrictedAndCallerNotZone(
        OrderType orderType,
        address zone
    ) internal view returns (bool mustValidate) {
        // Utilize assembly to efficiently perform the check.
        assembly {
            mustValidate := and(
                // Note that this check requires that there are no order
                // types beyond the current set (0-4).  It will need to be
                // modified if more order types are added.
                and(lt(orderType, 4), gt(orderType, 1)),
                iszero(eq(caller(), zone))
            )
        }
    }
    /**
     * @dev Calls the specified target with the given data and checks the status
     *      of the call. Revert reasons will be "bubbled up" if one is returned,
     *      otherwise reverting calls will throw a generic error based on the
     *      supplied error handler. Note that the custom error selector must
     *      already be in memory at the zero slot when this function is called.
     *
     * @param target        The address of the contract to call.
     * @param orderHash     The hash of the order associated with the call.
     * @param callData      The data to pass to the contract call.
     * @param size          The size of calldata.
     */
    function _callAndCheckStatus(
        address target,
        bytes32 orderHash,
        MemoryPointer callData,
        uint256 size
    ) internal {
        bool success;
        bool magicMatch;
        assembly {
            // Get magic value from the selector at start of provided calldata.
            let magic := and(mload(callData), MaskOverFirstFourBytes)
            // Clear the start of scratch space.
            mstore(0, 0)
            // Perform call, placing result in the first word of scratch space.
            success := call(gas(), target, 0, callData, size, 0, OneWord)
            // Determine if returned magic value matches the calldata selector.
            magicMatch := eq(magic, mload(0))
        }
        // Revert if the call was not successful.
        if (!success) {
            // Revert and pass reason along if one was returned.
            _revertWithReasonIfOneIsReturned();
            // If no reason was returned, revert with supplied error selector.
            assembly {
                // The error selector is already in memory at the zero slot.
                mstore(0x80, orderHash)
                // revert(abi.encodeWithSelector(
                //     "InvalidRestrictedOrder(bytes32)",
                //     orderHash
                // ))
                revert(0x7c, InvalidRestrictedOrder_error_length)
            }
        }
        // Revert if the correct magic value was not returned.
        if (!magicMatch) {
            // Revert with a generic error message.
            assembly {
                // The error selector is already in memory at the zero slot.
                mstore(0x80, orderHash)
                // revert(abi.encodeWithSelector(
                //     "InvalidRestrictedOrder(bytes32)",
                //     orderHash
                // ))
                revert(0x7c, InvalidRestrictedOrder_error_length)
            }
        }
    }
    /**
     * @dev Calls the specified target with the given data and checks the status
     *      of the call. Revert reasons will be "bubbled up" if one is returned,
     *      otherwise reverting calls will throw a generic error based on the
     *      supplied error handler.
     *
     * @param target          The address of the contract to call.
     * @param orderHash       The hash of the order associated with the call.
     * @param callData        The data to pass to the contract call.
     * @param size            The size of calldata.
     * @param errorSelector   The error handling function to call if the call
     *                        fails or the magic value does not match.
     * @param revertOnInvalid Whether to revert if the call is invalid. Must
     *                        still revert if the call returns invalid data.
     */
    function _callAndCheckStatusWithSkip(
        address target,
        bytes32 orderHash,
        MemoryPointer callData,
        uint256 size,
        uint256 errorSelector,
        bool revertOnInvalid
    ) internal returns (bool) {
        bool success;
        bool magicMatch;
        assembly {
            // Get magic value from the selector at start of provided calldata.
            let magic := and(mload(callData), MaskOverFirstFourBytes)
            // Clear the start of scratch space.
            mstore(0, 0)
            // Perform call, placing result in the first word of scratch space.
            success := call(gas(), target, 0, callData, size, 0, OneWord)
            // Determine if returned magic value matches the calldata selector.
            magicMatch := eq(magic, mload(0))
        }
        // Revert or return false if the call was not successful.
        if (!success) {
            if (!revertOnInvalid) {
                return false;
            }
            // Revert and pass reason along if one was returned.
            _revertWithReasonIfOneIsReturned();
            // If no reason was returned, revert with supplied error selector.
            assembly {
                mstore(0, errorSelector)
                mstore(InvalidRestrictedOrder_error_orderHash_ptr, orderHash)
                // revert(abi.encodeWithSelector(
                //     "InvalidRestrictedOrder(bytes32)",
                //     orderHash
                // ))
                revert(
                    Error_selector_offset,
                    InvalidRestrictedOrder_error_length
                )
            }
        }
        // Revert if the correct magic value was not returned.
        if (!magicMatch) {
            // Revert with a generic error message.
            assembly {
                mstore(0, errorSelector)
                mstore(InvalidRestrictedOrder_error_orderHash_ptr, orderHash)
                // revert(abi.encodeWithSelector(
                //     "InvalidRestrictedOrder(bytes32)",
                //     orderHash
                // ))
                revert(
                    Error_selector_offset,
                    InvalidRestrictedOrder_error_length
                )
            }
        }
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {
    ConduitBatch1155Transfer,
    ConduitTransfer
} from "../conduit/lib/ConduitStructs.sol";
/**
 * @title ConduitInterface
 * @author 0age
 * @notice ConduitInterface contains all external function interfaces, events,
 *         and errors for conduit contracts.
 */
interface ConduitInterface {
    /**
     * @dev Revert with an error when attempting to execute transfers using a
     *      caller that does not have an open channel.
     */
    error ChannelClosed(address channel);
    /**
     * @dev Revert with an error when attempting to update a channel to the
     *      current status of that channel.
     */
    error ChannelStatusAlreadySet(address channel, bool isOpen);
    /**
     * @dev Revert with an error when attempting to execute a transfer for an
     *      item that does not have an ERC20/721/1155 item type.
     */
    error InvalidItemType();
    /**
     * @dev Revert with an error when attempting to update the status of a
     *      channel from a caller that is not the conduit controller.
     */
    error InvalidController();
    /**
     * @dev Emit an event whenever a channel is opened or closed.
     *
     * @param channel The channel that has been updated.
     * @param open    A boolean indicating whether the conduit is open or not.
     */
    event ChannelUpdated(address indexed channel, bool open);
    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(
        ConduitTransfer[] calldata transfers
    ) external returns (bytes4 magicValue);
    /**
     * @notice Execute a sequence of batch 1155 transfers. Only a caller with an
     *         open channel can call this function.
     *
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);
    /**
     * @notice Execute a sequence of transfers, both single and batch 1155. Only
     *         a caller with an open channel can call this function.
     *
     * @param standardTransfers  The ERC20/721/1155 transfers to perform.
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);
    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
enum ConduitItemType {
    NATIVE, // unused
    ERC20,
    ERC721,
    ERC1155
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import { OrderStatus } from "seaport-types/src/lib/ConsiderationStructs.sol";
import { Assertions } from "./Assertions.sol";
import { SignatureVerification } from "./SignatureVerification.sol";
import {
    _revertInvalidTime,
    _revertOrderAlreadyFilled,
    _revertOrderIsCancelled,
    _revertOrderPartiallyFilled
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    BulkOrderProof_keyShift,
    BulkOrderProof_keySize,
    BulkOrderProof_lengthAdjustmentBeforeMask,
    BulkOrderProof_lengthRangeAfterMask,
    BulkOrderProof_minSize,
    BulkOrderProof_rangeSize,
    ECDSA_MaxLength,
    OneWord,
    OneWordShift,
    ThirtyOneBytes,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
/**
 * @title Verifiers
 * @author 0age
 * @notice Verifiers contains functions for performing verifications.
 */
contract Verifiers is Assertions, SignatureVerification {
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) Assertions(conduitController) {}
    /**
     * @dev Internal view function to ensure that the current time falls within
     *      an order's valid timespan.
     *
     * @param startTime       The time at which the order becomes active.
     * @param endTime         The time at which the order becomes inactive.
     * @param revertOnInvalid A boolean indicating whether to revert if the
     *                        order is not active.
     *
     * @return valid A boolean indicating whether the order is active.
     */
    function _verifyTime(
        uint256 startTime,
        uint256 endTime,
        bool revertOnInvalid
    ) internal view returns (bool valid) {
        // Mark as valid if order has started and has not already ended.
        assembly {
            valid := and(
                iszero(gt(startTime, timestamp())),
                gt(endTime, timestamp())
            )
        }
        // Only revert on invalid if revertOnInvalid has been supplied as true.
        if (revertOnInvalid && !valid) {
            _revertInvalidTime(startTime, endTime);
        }
    }
    /**
     * @dev Internal view function to verify the signature of an order. An
     *      ERC-1271 fallback will be attempted if either the signature length
     *      is not 64 or 65 bytes or if the recovered signer does not match the
     *      supplied offerer. Note that in cases where a 64 or 65 byte signature
     *      is supplied, only standard ECDSA signatures that recover to a
     *      non-zero address are supported.
     *
     * @param offerer   The offerer for the order.
     * @param orderHash The order hash.
     * @param signature A signature from the offerer indicating that the order
     *                  has been approved.
     */
    function _verifySignature(
        address offerer,
        bytes32 orderHash,
        bytes memory signature
    ) internal view {
        // Determine whether the offerer is the caller.
        bool offererIsCaller;
        assembly {
            offererIsCaller := eq(offerer, caller())
        }
        // Skip signature verification if the offerer is the caller.
        if (offererIsCaller) {
            return;
        }
        // Derive the EIP-712 domain separator.
        bytes32 domainSeparator = _domainSeparator();
        // Derive original EIP-712 digest using domain separator and order hash.
        bytes32 originalDigest = _deriveEIP712Digest(
            domainSeparator,
            orderHash
        );
        // Read the length of the signature from memory and place on the stack.
        uint256 originalSignatureLength = signature.length;
        // Determine effective digest if signature has a valid bulk order size.
        bytes32 digest;
        if (_isValidBulkOrderSize(originalSignatureLength)) {
            // Rederive order hash and digest using bulk order proof.
            (orderHash) = _computeBulkOrderProof(signature, orderHash);
            digest = _deriveEIP712Digest(domainSeparator, orderHash);
        } else {
            // Supply the original digest as the effective digest.
            digest = originalDigest;
        }
        // Ensure that the signature for the digest is valid for the offerer.
        _assertValidSignature(
            offerer,
            digest,
            originalDigest,
            originalSignatureLength,
            signature
        );
    }
    /**
     * @dev Determines whether the specified bulk order size is valid.
     *
     * @param signatureLength The signature length of the bulk order to check.
     *
     * @return validLength True if bulk order size is valid, false otherwise.
     */
    function _isValidBulkOrderSize(
        uint256 signatureLength
    ) internal pure returns (bool validLength) {
        // Utilize assembly to validate the length; the equivalent logic is
        // (64 + x) + 3 + 32y where (0 <= x <= 1) and (1 <= y <= 24).
        assembly {
            validLength := and(
                lt(
                    sub(signatureLength, BulkOrderProof_minSize),
                    BulkOrderProof_rangeSize
                ),
                lt(
                    and(
                        add(
                            signatureLength,
                            BulkOrderProof_lengthAdjustmentBeforeMask
                        ),
                        ThirtyOneBytes
                    ),
                    BulkOrderProof_lengthRangeAfterMask
                )
            )
        }
    }
    /**
     * @dev Computes the bulk order hash for the specified proof and leaf. Note
     *      that if an index that exceeds the number of orders in the bulk order
     *      payload will instead "wrap around" and refer to an earlier index.
     *
     * @param proofAndSignature The proof and signature of the bulk order.
     * @param leaf              The leaf of the bulk order tree.
     *
     * @return bulkOrderHash The bulk order hash.
     */
    function _computeBulkOrderProof(
        bytes memory proofAndSignature,
        bytes32 leaf
    ) internal pure returns (bytes32 bulkOrderHash) {
        // Declare arguments for the root hash and the height of the proof.
        bytes32 root;
        uint256 height;
        // Utilize assembly to efficiently derive the root hash using the proof.
        assembly {
            // Retrieve the length of the proof, key, and signature combined.
            let fullLength := mload(proofAndSignature)
            // If proofAndSignature has odd length, it is a compact signature
            // with 64 bytes.
            let signatureLength := sub(ECDSA_MaxLength, and(fullLength, 1))
            // Derive height (or depth of tree) with signature and proof length.
            height := shr(OneWordShift, sub(fullLength, signatureLength))
            // Update the length in memory to only include the signature.
            mstore(proofAndSignature, signatureLength)
            // Derive the pointer for the key using the signature length.
            let keyPtr := add(proofAndSignature, add(OneWord, signatureLength))
            // Retrieve the three-byte key using the derived pointer.
            let key := shr(BulkOrderProof_keyShift, mload(keyPtr))
            /// Retrieve pointer to first proof element by applying a constant
            // for the key size to the derived key pointer.
            let proof := add(keyPtr, BulkOrderProof_keySize)
            // Compute level 1.
            let scratchPtr1 := shl(OneWordShift, and(key, 1))
            mstore(scratchPtr1, leaf)
            mstore(xor(scratchPtr1, OneWord), mload(proof))
            // Compute remaining proofs.
            for {
                let i := 1
            } lt(i, height) {
                i := add(i, 1)
            } {
                proof := add(proof, OneWord)
                let scratchPtr := shl(OneWordShift, and(shr(i, key), 1))
                mstore(scratchPtr, keccak256(0, TwoWords))
                mstore(xor(scratchPtr, OneWord), mload(proof))
            }
            // Compute root hash.
            root := keccak256(0, TwoWords)
        }
        // Retrieve appropriate typehash constant based on height.
        bytes32 rootTypeHash = _lookupBulkOrderTypehash(height);
        // Use the typehash and the root hash to derive final bulk order hash.
        assembly {
            mstore(0, rootTypeHash)
            mstore(OneWord, root)
            bulkOrderHash := keccak256(0, TwoWords)
        }
    }
    /**
     * @dev Internal view function to validate that a given order is fillable
     *      and not cancelled based on the order status.
     *
     * @param orderHash       The order hash.
     * @param orderStatus     The status of the order, including whether it has
     *                        been cancelled and the fraction filled.
     * @param onlyAllowUnused A boolean flag indicating whether partial fills
     *                        are supported by the calling function.
     * @param revertOnInvalid A boolean indicating whether to revert if the
     *                        order has been cancelled or filled beyond the
     *                        allowable amount.
     *
     * @return valid A boolean indicating whether the order is valid.
     */
    function _verifyOrderStatus(
        bytes32 orderHash,
        OrderStatus storage orderStatus,
        bool onlyAllowUnused,
        bool revertOnInvalid
    ) internal view returns (bool valid) {
        // Ensure that the order has not been cancelled.
        if (orderStatus.isCancelled) {
            // Only revert if revertOnInvalid has been supplied as true.
            if (revertOnInvalid) {
                _revertOrderIsCancelled(orderHash);
            }
            // Return false as the order status is invalid.
            return false;
        }
        // Read order status numerator from storage and place on stack.
        uint256 orderStatusNumerator = orderStatus.numerator;
        // If the order is not entirely unused...
        if (orderStatusNumerator != 0) {
            // ensure the order has not been partially filled when not allowed.
            if (onlyAllowUnused) {
                // Always revert on partial fills when onlyAllowUnused is true.
                _revertOrderPartiallyFilled(orderHash);
            }
            // Otherwise, ensure that order has not been entirely filled.
            else if (orderStatusNumerator >= orderStatus.denominator) {
                // Only revert if revertOnInvalid has been supplied as true.
                if (revertOnInvalid) {
                    _revertOrderAlreadyFilled(orderHash);
                }
                // Return false as the order status is invalid.
                return false;
            }
        }
        // Return true as the order status is valid.
        valid = true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.14;
import {
    BadReturnValueFromERC20OnTransfer_error_amount_ptr,
    BadReturnValueFromERC20OnTransfer_error_from_ptr,
    BadReturnValueFromERC20OnTransfer_error_length,
    BadReturnValueFromERC20OnTransfer_error_selector,
    BadReturnValueFromERC20OnTransfer_error_to_ptr,
    BadReturnValueFromERC20OnTransfer_error_token_ptr,
    BatchTransfer1155Params_amounts_head_ptr,
    BatchTransfer1155Params_calldata_baseSize,
    BatchTransfer1155Params_data_head_ptr,
    BatchTransfer1155Params_data_length_basePtr,
    BatchTransfer1155Params_ids_head_ptr,
    BatchTransfer1155Params_ids_length_offset,
    BatchTransfer1155Params_ids_length_ptr,
    BatchTransfer1155Params_ptr,
    ConduitBatch1155Transfer_amounts_length_baseOffset,
    ConduitBatch1155Transfer_from_offset,
    ConduitBatch1155Transfer_ids_head_offset,
    ConduitBatch1155Transfer_ids_length_offset,
    ConduitBatch1155Transfer_usable_head_size,
    ConduitBatchTransfer_amounts_head_offset,
    CostPerWord,
    DefaultFreeMemoryPointer,
    ERC1155_safeBatchTransferFrom_signature,
    ERC1155_safeTransferFrom_amount_ptr,
    ERC1155_safeTransferFrom_data_length_offset,
    ERC1155_safeTransferFrom_data_length_ptr,
    ERC1155_safeTransferFrom_data_offset_ptr,
    ERC1155_safeTransferFrom_from_ptr,
    ERC1155_safeTransferFrom_id_ptr,
    ERC1155_safeTransferFrom_length,
    ERC1155_safeTransferFrom_sig_ptr,
    ERC1155_safeTransferFrom_signature,
    ERC1155_safeTransferFrom_to_ptr,
    ERC1155BatchTransferGenericFailure_error_signature,
    ERC1155BatchTransferGenericFailure_ids_offset,
    ERC1155BatchTransferGenericFailure_token_ptr,
    ERC20_transferFrom_amount_ptr,
    ERC20_transferFrom_from_ptr,
    ERC20_transferFrom_length,
    ERC20_transferFrom_sig_ptr,
    ERC20_transferFrom_signature,
    ERC20_transferFrom_to_ptr,
    ERC721_transferFrom_from_ptr,
    ERC721_transferFrom_id_ptr,
    ERC721_transferFrom_length,
    ERC721_transferFrom_sig_ptr,
    ERC721_transferFrom_signature,
    ERC721_transferFrom_to_ptr,
    ExtraGasBuffer,
    FreeMemoryPointerSlot,
    Generic_error_selector_offset,
    Invalid1155BatchTransferEncoding_length,
    Invalid1155BatchTransferEncoding_ptr,
    Invalid1155BatchTransferEncoding_selector,
    MemoryExpansionCoefficientShift,
    NoContract_error_account_ptr,
    NoContract_error_length,
    NoContract_error_selector,
    OneWord,
    OneWordShift,
    Slot0x80,
    Slot0xA0,
    Slot0xC0,
    ThirtyOneBytes,
    TokenTransferGenericFailure_err_identifier_ptr,
    TokenTransferGenericFailure_error_amount_ptr,
    TokenTransferGenericFailure_error_from_ptr,
    TokenTransferGenericFailure_error_identifier_ptr,
    TokenTransferGenericFailure_error_length,
    TokenTransferGenericFailure_error_selector,
    TokenTransferGenericFailure_error_to_ptr,
    TokenTransferGenericFailure_error_token_ptr,
    TwoWords,
    TwoWordsShift,
    ZeroSlot
} from "seaport-types/src/lib/TokenTransferrerConstants.sol";
import {
    TokenTransferrerErrors
} from "seaport-types/src/interfaces/TokenTransferrerErrors.sol";
import {
    ConduitBatch1155Transfer
} from "seaport-types/src/conduit/lib/ConduitStructs.sol";
/**
 * @title TokenTransferrer
 * @author 0age
 * @custom:coauthor d1ll0n
 * @custom:coauthor transmissions11
 * @notice TokenTransferrer is a library for performing optimized ERC20, ERC721,
 *         ERC1155, and batch ERC1155 transfers, used by both Seaport as well as
 *         by conduits deployed by the ConduitController. Use great caution when
 *         considering these functions for use in other codebases, as there are
 *         significant side effects and edge cases that need to be thoroughly
 *         understood and carefully addressed.
 */
contract TokenTransferrer is TokenTransferrerErrors {
    /**
     * @dev Internal function to transfer ERC20 tokens from a given originator
     *      to a given recipient. Sufficient approvals must be set on the
     *      contract performing the transfer.
     *
     * @param token      The ERC20 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC20Transfer(
        address token,
        address from,
        address to,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC20 token transfer.
        assembly {
            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)
            // Write call data into memory, starting with function selector.
            mstore(ERC20_transferFrom_sig_ptr, ERC20_transferFrom_signature)
            mstore(ERC20_transferFrom_from_ptr, from)
            mstore(ERC20_transferFrom_to_ptr, to)
            mstore(ERC20_transferFrom_amount_ptr, amount)
            // Make call & copy up to 32 bytes of return data to scratch space.
            // Scratch space does not need to be cleared ahead of time, as the
            // subsequent check will ensure that either at least a full word of
            // return data is received (in which case it will be overwritten) or
            // that no data is received (in which case scratch space will be
            // ignored) on a successful call to the given token.
            let callStatus := call(
                gas(),
                token,
                0,
                ERC20_transferFrom_sig_ptr,
                ERC20_transferFrom_length,
                0,
                OneWord
            )
            // Determine whether transfer was successful using status & result.
            let success := and(
                // Set success to whether the call reverted, if not check it
                // either returned exactly 1 (can't just be non-zero data),
                // or had no return data.
                or(
                    and(eq(mload(0), 1), gt(returndatasize(), 31)),
                    iszero(returndatasize())
                ),
                callStatus
            )
            // Handle cases where either the transfer failed or no data was
            // returned. Group these, as most transfers will succeed with data.
            // Equivalent to `or(iszero(success), iszero(returndatasize()))`
            // but after it's inverted for JUMPI this expression is cheaper.
            if iszero(and(success, iszero(iszero(returndatasize())))) {
                // If the token has no code or the transfer failed: Equivalent
                // to `or(iszero(success), iszero(extcodesize(token)))` but
                // after it's inverted for JUMPI this expression is cheaper.
                if iszero(and(iszero(iszero(extcodesize(token))), success)) {
                    // If the transfer failed:
                    if iszero(success) {
                        // If it was due to a revert:
                        if iszero(callStatus) {
                            // If it returned a message, bubble it up as long as
                            // sufficient gas remains to do so:
                            if returndatasize() {
                                // Ensure that sufficient gas is available to
                                // copy returndata while expanding memory where
                                // necessary. Start by computing the word size
                                // of returndata and allocated memory. Round up
                                // to the nearest full word.
                                let returnDataWords := shr(
                                    OneWordShift,
                                    add(returndatasize(), ThirtyOneBytes)
                                )
                                // Note: use the free memory pointer in place of
                                // msize() to work around a Yul warning that
                                // prevents accessing msize directly when the IR
                                // pipeline is activated.
                                let msizeWords := shr(OneWordShift, memPointer)
                                // Next, compute the cost of the returndatacopy.
                                let cost := mul(CostPerWord, returnDataWords)
                                // Then, compute cost of new memory allocation.
                                if gt(returnDataWords, msizeWords) {
                                    cost := add(
                                        cost,
                                        add(
                                            mul(
                                                sub(
                                                    returnDataWords,
                                                    msizeWords
                                                ),
                                                CostPerWord
                                            ),
                                            shr(
                                                MemoryExpansionCoefficientShift,
                                                sub(
                                                    mul(
                                                        returnDataWords,
                                                        returnDataWords
                                                    ),
                                                    mul(msizeWords, msizeWords)
                                                )
                                            )
                                        )
                                    )
                                }
                                // Finally, add a small constant and compare to
                                // gas remaining; bubble up the revert data if
                                // enough gas is still available.
                                if lt(add(cost, ExtraGasBuffer), gas()) {
                                    // Copy returndata to memory; overwrite
                                    // existing memory.
                                    returndatacopy(0, 0, returndatasize())
                                    // Revert, specifying memory region with
                                    // copied returndata.
                                    revert(0, returndatasize())
                                }
                            }
                            // Store left-padded selector with push4, mem[28:32]
                            mstore(
                                0,
                                TokenTransferGenericFailure_error_selector
                            )
                            mstore(
                                TokenTransferGenericFailure_error_token_ptr,
                                token
                            )
                            mstore(
                                TokenTransferGenericFailure_error_from_ptr,
                                from
                            )
                            mstore(TokenTransferGenericFailure_error_to_ptr, to)
                            mstore(
                                TokenTransferGenericFailure_err_identifier_ptr,
                                0
                            )
                            mstore(
                                TokenTransferGenericFailure_error_amount_ptr,
                                amount
                            )
                            // revert(abi.encodeWithSignature(
                            //     "TokenTransferGenericFailure(
                            //         address,address,address,uint256,uint256
                            //     )", token, from, to, identifier, amount
                            // ))
                            revert(
                                Generic_error_selector_offset,
                                TokenTransferGenericFailure_error_length
                            )
                        }
                        // Otherwise revert with a message about the token
                        // returning false or non-compliant return values.
                        // Store left-padded selector with push4, mem[28:32]
                        mstore(
                            0,
                            BadReturnValueFromERC20OnTransfer_error_selector
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_token_ptr,
                            token
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_from_ptr,
                            from
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_to_ptr,
                            to
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_amount_ptr,
                            amount
                        )
                        // revert(abi.encodeWithSignature(
                        //     "BadReturnValueFromERC20OnTransfer(
                        //         address,address,address,uint256
                        //     )", token, from, to, amount
                        // ))
                        revert(
                            Generic_error_selector_offset,
                            BadReturnValueFromERC20OnTransfer_error_length
                        )
                    }
                    // Otherwise, revert with error about token not having code:
                    // Store left-padded selector with push4, mem[28:32]
                    mstore(0, NoContract_error_selector)
                    mstore(NoContract_error_account_ptr, token)
                    // revert(abi.encodeWithSignature(
                    //      "NoContract(address)", account
                    // ))
                    revert(
                        Generic_error_selector_offset,
                        NoContract_error_length
                    )
                }
                // Otherwise, the token just returned no data despite the call
                // having succeeded; no need to optimize for this as it's not
                // technically ERC20 compliant.
            }
            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }
    /**
     * @dev Internal function to transfer an ERC721 token from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer. Note that this function does
     *      not check whether the receiver can accept the ERC721 token (i.e. it
     *      does not use `safeTransferFrom`).
     *
     * @param token      The ERC721 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The tokenId to transfer.
     */
    function _performERC721Transfer(
        address token,
        address from,
        address to,
        uint256 identifier
    ) internal {
        // Utilize assembly to perform an optimized ERC721 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, NoContract_error_selector)
                mstore(NoContract_error_account_ptr, token)
                // revert(abi.encodeWithSignature(
                //     "NoContract(address)", account
                // ))
                revert(Generic_error_selector_offset, NoContract_error_length)
            }
            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)
            // Write call data to memory starting with function selector.
            mstore(ERC721_transferFrom_sig_ptr, ERC721_transferFrom_signature)
            mstore(ERC721_transferFrom_from_ptr, from)
            mstore(ERC721_transferFrom_to_ptr, to)
            mstore(ERC721_transferFrom_id_ptr, identifier)
            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC721_transferFrom_sig_ptr,
                ERC721_transferFrom_length,
                0,
                0
            )
            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := shr(
                        OneWordShift,
                        add(returndatasize(), ThirtyOneBytes)
                    )
                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := shr(OneWordShift, memPointer)
                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)
                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                shr(
                                    MemoryExpansionCoefficientShift,
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    )
                                )
                            )
                        )
                    }
                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())
                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }
                // Otherwise revert with a generic error message.
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, TokenTransferGenericFailure_error_selector)
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(
                    TokenTransferGenericFailure_error_identifier_ptr,
                    identifier
                )
                mstore(TokenTransferGenericFailure_error_amount_ptr, 1)
                // revert(abi.encodeWithSignature(
                //     "TokenTransferGenericFailure(
                //         address,address,address,uint256,uint256
                //     )", token, from, to, identifier, amount
                // ))
                revert(
                    Generic_error_selector_offset,
                    TokenTransferGenericFailure_error_length
                )
            }
            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }
    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer.
     *
     * @param token      The ERC1155 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The id to transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC1155Transfer(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC1155 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, NoContract_error_selector)
                mstore(NoContract_error_account_ptr, token)
                // revert(abi.encodeWithSignature(
                //     "NoContract(address)", account
                // ))
                revert(Generic_error_selector_offset, NoContract_error_length)
            }
            // The following memory slots will be used when populating call data
            // for the transfer; read the values and restore them later.
            let memPointer := mload(FreeMemoryPointerSlot)
            let slot0x80 := mload(Slot0x80)
            let slot0xA0 := mload(Slot0xA0)
            let slot0xC0 := mload(Slot0xC0)
            // Write call data into memory, beginning with function selector.
            mstore(
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_signature
            )
            mstore(ERC1155_safeTransferFrom_from_ptr, from)
            mstore(ERC1155_safeTransferFrom_to_ptr, to)
            mstore(ERC1155_safeTransferFrom_id_ptr, identifier)
            mstore(ERC1155_safeTransferFrom_amount_ptr, amount)
            mstore(
                ERC1155_safeTransferFrom_data_offset_ptr,
                ERC1155_safeTransferFrom_data_length_offset
            )
            mstore(ERC1155_safeTransferFrom_data_length_ptr, 0)
            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_length,
                0,
                0
            )
            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := shr(
                        OneWordShift,
                        add(returndatasize(), ThirtyOneBytes)
                    )
                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := shr(OneWordShift, memPointer)
                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)
                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                shr(
                                    MemoryExpansionCoefficientShift,
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    )
                                )
                            )
                        )
                    }
                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())
                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }
                // Otherwise revert with a generic error message.
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, TokenTransferGenericFailure_error_selector)
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(
                    TokenTransferGenericFailure_error_identifier_ptr,
                    identifier
                )
                mstore(TokenTransferGenericFailure_error_amount_ptr, amount)
                // revert(abi.encodeWithSignature(
                //     "TokenTransferGenericFailure(
                //         address,address,address,uint256,uint256
                //     )", token, from, to, identifier, amount
                // ))
                revert(
                    Generic_error_selector_offset,
                    TokenTransferGenericFailure_error_length
                )
            }
            mstore(Slot0x80, slot0x80) // Restore slot 0x80.
            mstore(Slot0xA0, slot0xA0) // Restore slot 0xA0.
            mstore(Slot0xC0, slot0xC0) // Restore slot 0xC0.
            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }
    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer. NOTE: this function is not
     *      memory-safe; it will overwrite existing memory, restore the free
     *      memory pointer to the default value, and overwrite the zero slot.
     *      This function should only be called once memory is no longer
     *      required and when uninitialized arrays are not utilized, and memory
     *      should be considered fully corrupted (aside from the existence of a
     *      default-value free memory pointer) after calling this function.
     *
     * @param batchTransfers The group of 1155 batch transfers to perform.
     */
    function _performERC1155BatchTransfers(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) internal {
        // Utilize assembly to perform optimized batch 1155 transfers.
        assembly {
            let len := batchTransfers.length
            // Pointer to first head in the array, which is offset to the struct
            // at each index. This gets incremented after each loop to avoid
            // multiplying by 32 to get the offset for each element.
            let nextElementHeadPtr := batchTransfers.offset
            // Pointer to beginning of the head of the array. This is the
            // reference position each offset references. It's held static to
            // let each loop calculate the data position for an element.
            let arrayHeadPtr := nextElementHeadPtr
            // Write the function selector, which will be reused for each call:
            // safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)
            mstore(
                ConduitBatch1155Transfer_from_offset,
                ERC1155_safeBatchTransferFrom_signature
            )
            // Iterate over each batch transfer.
            for {
                let i := 0
            } lt(i, len) {
                i := add(i, 1)
            } {
                // Read the offset to the beginning of the element and add
                // it to pointer to the beginning of the array head to get
                // the absolute position of the element in calldata.
                let elementPtr := add(
                    arrayHeadPtr,
                    calldataload(nextElementHeadPtr)
                )
                // Retrieve the token from calldata.
                let token := calldataload(elementPtr)
                // If the token has no code, revert.
                if iszero(extcodesize(token)) {
                    // Store left-padded selector with push4, mem[28:32]
                    mstore(0, NoContract_error_selector)
                    mstore(NoContract_error_account_ptr, token)
                    // revert(abi.encodeWithSignature(
                    //     "NoContract(address)", account
                    // ))
                    revert(
                        Generic_error_selector_offset,
                        NoContract_error_length
                    )
                }
                // Get the total number of supplied ids.
                let idsLength := calldataload(
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset)
                )
                // Determine the expected offset for the amounts array.
                let expectedAmountsOffset := add(
                    ConduitBatch1155Transfer_amounts_length_baseOffset,
                    shl(OneWordShift, idsLength)
                )
                // Validate struct encoding.
                let invalidEncoding := iszero(
                    and(
                        // ids.length == amounts.length
                        eq(
                            idsLength,
                            calldataload(add(elementPtr, expectedAmountsOffset))
                        ),
                        and(
                            // ids_offset == 0xa0
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatch1155Transfer_ids_head_offset
                                    )
                                ),
                                ConduitBatch1155Transfer_ids_length_offset
                            ),
                            // amounts_offset == 0xc0 + ids.length*32
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatchTransfer_amounts_head_offset
                                    )
                                ),
                                expectedAmountsOffset
                            )
                        )
                    )
                )
                // Revert with an error if the encoding is not valid.
                if invalidEncoding {
                    // Store left-padded selector with push4, mem[28:32]
                    mstore(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_selector
                    )
                    // revert(abi.encodeWithSignature(
                    //     "Invalid1155BatchTransferEncoding()"
                    // ))
                    revert(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_length
                    )
                }
                // Update the offset position for the next loop
                nextElementHeadPtr := add(nextElementHeadPtr, OneWord)
                // Copy the first section of calldata (before dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_from_offset),
                    ConduitBatch1155Transfer_usable_head_size
                )
                // Determine size of calldata required for ids and amounts. Note
                // that the size includes both lengths as well as the data.
                let idsAndAmountsSize := add(
                    TwoWords,
                    shl(TwoWordsShift, idsLength)
                )
                // Update the offset for the data array in memory.
                mstore(
                    BatchTransfer1155Params_data_head_ptr,
                    add(
                        BatchTransfer1155Params_ids_length_offset,
                        idsAndAmountsSize
                    )
                )
                // Set the length of the data array in memory to zero.
                mstore(
                    add(
                        BatchTransfer1155Params_data_length_basePtr,
                        idsAndAmountsSize
                    ),
                    0
                )
                // Determine the total calldata size for the call to transfer.
                let transferDataSize := add(
                    BatchTransfer1155Params_calldata_baseSize,
                    idsAndAmountsSize
                )
                // Copy second section of calldata (including dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ids_length_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset),
                    idsAndAmountsSize
                )
                // Perform the call to transfer 1155 tokens.
                let success := call(
                    gas(),
                    token,
                    0,
                    ConduitBatch1155Transfer_from_offset, // Data start.
                    transferDataSize, // Location of the length of callData.
                    0,
                    0
                )
                // If the transfer reverted:
                if iszero(success) {
                    // If it returned a message, bubble it up as long as
                    // sufficient gas remains to do so:
                    if returndatasize() {
                        // Ensure that sufficient gas is available to copy
                        // returndata while expanding memory where necessary.
                        // Start by computing word size of returndata and
                        // allocated memory. Round up to the nearest full word.
                        let returnDataWords := shr(
                            OneWordShift,
                            add(returndatasize(), ThirtyOneBytes)
                        )
                        // Note: use transferDataSize in place of msize() to
                        // work around a Yul warning that prevents accessing
                        // msize directly when the IR pipeline is activated.
                        // The free memory pointer is not used here because
                        // this function does almost all memory management
                        // manually and does not update it, and transferDataSize
                        // should be the largest memory value used (unless a
                        // previous batch was larger).
                        let msizeWords := shr(OneWordShift, transferDataSize)
                        // Next, compute the cost of the returndatacopy.
                        let cost := mul(CostPerWord, returnDataWords)
                        // Then, compute cost of new memory allocation.
                        if gt(returnDataWords, msizeWords) {
                            cost := add(
                                cost,
                                add(
                                    mul(
                                        sub(returnDataWords, msizeWords),
                                        CostPerWord
                                    ),
                                    shr(
                                        MemoryExpansionCoefficientShift,
                                        sub(
                                            mul(
                                                returnDataWords,
                                                returnDataWords
                                            ),
                                            mul(msizeWords, msizeWords)
                                        )
                                    )
                                )
                            )
                        }
                        // Finally, add a small constant and compare to gas
                        // remaining; bubble up the revert data if enough gas is
                        // still available.
                        if lt(add(cost, ExtraGasBuffer), gas()) {
                            // Copy returndata to memory; overwrite existing.
                            returndatacopy(0, 0, returndatasize())
                            // Revert with memory region containing returndata.
                            revert(0, returndatasize())
                        }
                    }
                    // Set the error signature.
                    mstore(
                        0,
                        ERC1155BatchTransferGenericFailure_error_signature
                    )
                    // Write the token.
                    mstore(ERC1155BatchTransferGenericFailure_token_ptr, token)
                    // Increase the offset to ids by 32.
                    mstore(
                        BatchTransfer1155Params_ids_head_ptr,
                        ERC1155BatchTransferGenericFailure_ids_offset
                    )
                    // Increase the offset to amounts by 32.
                    mstore(
                        BatchTransfer1155Params_amounts_head_ptr,
                        add(
                            OneWord,
                            mload(BatchTransfer1155Params_amounts_head_ptr)
                        )
                    )
                    // Return modified region. The total size stays the same as
                    // `token` uses the same number of bytes as `data.length`.
                    revert(0, transferDataSize)
                }
            }
            // Reset the free memory pointer to the default value; memory must
            // be assumed to be dirtied and not reused from this point forward.
            // Also note that the zero slot is not reset to zero, meaning empty
            // arrays cannot be safely created or utilized until it is restored.
            mstore(FreeMemoryPointerSlot, DefaultFreeMemoryPointer)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/**
 * @title ZoneInteractionErrors
 * @author 0age
 * @notice ZoneInteractionErrors contains errors related to zone interaction.
 */
interface ZoneInteractionErrors {
    /**
     * @dev Revert with an error when attempting to fill an order that specifies
     *      a restricted submitter as its order type when not submitted by
     *      either the offerer or the order's zone or approved as valid by the
     *      zone in question via a call to `isValidOrder`.
     *
     * @param orderHash The order hash for the invalid restricted order.
     */
    error InvalidRestrictedOrder(bytes32 orderHash);
    /**
     * @dev Revert with an error when attempting to fill a contract order that
     *      fails to generate an order successfully, that does not adhere to the
     *      requirements for minimum spent or maximum received supplied by the
     *      fulfiller, or that fails the post-execution `ratifyOrder` check..
     *
     * @param orderHash The order hash for the invalid contract order.
     */
    error InvalidContractOrder(bytes32 orderHash);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    CostPerWord,
    ExtraGasBuffer,
    FreeMemoryPointerSlot,
    MemoryExpansionCoefficientShift,
    OneWord,
    OneWordShift,
    ThirtyOneBytes
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    MemoryPointer,
    MemoryPointerLib
} from "seaport-types/src/helpers/PointerLibraries.sol";
import {
    AdvancedOrder,
    Execution
} from "seaport-types/src/lib/ConsiderationStructs.sol";
/**
 * @title LowLevelHelpers
 * @author 0age
 * @notice LowLevelHelpers contains logic for performing various low-level
 *         operations.
 */
contract LowLevelHelpers {
    /**
     * @dev Internal view function to revert and pass along the revert reason if
     *      data was returned by the last call and that the size of that data
     *      does not exceed the currently allocated memory size.
     */
    function _revertWithReasonIfOneIsReturned() internal view {
        assembly {
            // If it returned a message, bubble it up as long as sufficient gas
            // remains to do so:
            if returndatasize() {
                // Ensure that sufficient gas is available to copy returndata
                // while expanding memory where necessary. Start by computing
                // the word size of returndata and allocated memory.
                let returnDataWords := shr(
                    OneWordShift,
                    add(returndatasize(), ThirtyOneBytes)
                )
                // Note: use the free memory pointer in place of msize() to work
                // around a Yul warning that prevents accessing msize directly
                // when the IR pipeline is activated.
                let msizeWords := shr(
                    OneWordShift,
                    mload(FreeMemoryPointerSlot)
                )
                // Next, compute the cost of the returndatacopy.
                let cost := mul(CostPerWord, returnDataWords)
                // Then, compute cost of new memory allocation.
                if gt(returnDataWords, msizeWords) {
                    cost := add(
                        cost,
                        add(
                            mul(sub(returnDataWords, msizeWords), CostPerWord),
                            shr(
                                MemoryExpansionCoefficientShift,
                                sub(
                                    mul(returnDataWords, returnDataWords),
                                    mul(msizeWords, msizeWords)
                                )
                            )
                        )
                    )
                }
                // Finally, add a small constant and compare to gas remaining;
                // bubble up the revert data if enough gas is still available.
                if lt(add(cost, ExtraGasBuffer), gas()) {
                    // Copy returndata to memory; overwrite existing memory.
                    returndatacopy(0, 0, returndatasize())
                    // Revert, specifying memory region with copied returndata.
                    revert(0, returndatasize())
                }
            }
        }
    }
    /**
     * @dev Internal view function to branchlessly select either the caller (if
     *      a supplied recipient is equal to zero) or the supplied recipient (if
     *      that recipient is a nonzero value).
     *
     * @param recipient The supplied recipient.
     *
     * @return updatedRecipient The updated recipient.
     */
    function _substituteCallerForEmptyRecipient(
        address recipient
    ) internal view returns (address updatedRecipient) {
        // Utilize assembly to perform a branchless operation on the recipient.
        assembly {
            // Add caller to recipient if recipient equals 0; otherwise add 0.
            updatedRecipient := add(recipient, mul(iszero(recipient), caller()))
        }
    }
    /**
     * @dev Internal pure function to cast a `bool` value to a `uint256` value.
     *
     * @param b The `bool` value to cast.
     *
     * @return u The `uint256` value.
     */
    function _cast(bool b) internal pure returns (uint256 u) {
        assembly {
            u := b
        }
    }
    /**
     * @dev Internal pure function to cast the `pptrOffset` function from
     *      `MemoryPointerLib` to a function that takes a memory array of
     *      `AdvancedOrder` and an offset in memory and returns the
     *      `AdvancedOrder` whose pointer is stored at that offset from the
     *      array length.
     */
    function _getReadAdvancedOrderByOffset()
        internal
        pure
        returns (
            function(AdvancedOrder[] memory, uint256)
                internal
                pure
                returns (AdvancedOrder memory) fn2
        )
    {
        function(MemoryPointer, uint256)
            internal
            pure
            returns (MemoryPointer) fn1 = MemoryPointerLib.pptrOffset;
        assembly {
            fn2 := fn1
        }
    }
    /**
     * @dev Internal pure function to cast the `pptrOffset` function from
     *      `MemoryPointerLib` to a function that takes a memory array of
     *      `Execution` and an offset in memory and returns the
     *      `Execution` whose pointer is stored at that offset from the
     *      array length.
     */
    function _getReadExecutionByOffset()
        internal
        pure
        returns (
            function(Execution[] memory, uint256)
                internal
                pure
                returns (Execution memory) fn2
        )
    {
        function(MemoryPointer, uint256)
            internal
            pure
            returns (MemoryPointer) fn1 = MemoryPointerLib.pptrOffset;
        assembly {
            fn2 := fn1
        }
    }
    /**
     * @dev Internal pure function to return a `true` value that solc
     *      will not recognize as a compile time constant.
     *
     *      This function is used to bypass function specialization for
     *      functions which take a constant boolean as an input parameter.
     *
     *      This should only be used in cases where specialization has a
     *      negligible impact on the gas cost of the function.
     *
     *      Note: assumes the calldatasize is non-zero.
     */
    function _runTimeConstantTrue() internal pure returns (bool) {
        return msg.data.length > 0;
    }
    /**
     * @dev Internal pure function to return a `false` value that solc
     *      will not recognize as a compile time constant.
     *
     *      This function is used to bypass function specialization for
     *      functions which take a constant boolean as an input parameter.
     *
     *      This should only be used in cases where specialization has a
     *      negligible impact on the gas cost of the function.
     *
     *      Note: assumes the calldatasize is non-zero.
     */
    function _runTimeConstantFalse() internal pure returns (bool) {
        return msg.data.length == 0;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    authorizeOrder_calldata_baseOffset,
    authorizeOrder_head_offset,
    authorizeOrder_selector_offset,
    authorizeOrder_selector,
    authorizeOrder_zoneParameters_offset,
    BasicOrder_addlRecipients_length_cdPtr,
    BasicOrder_common_params_size,
    BasicOrder_consideration_offset_from_offer,
    BasicOrder_offerer_cdPtr,
    BasicOrder_startTime_cdPtr,
    BasicOrder_startTimeThroughZoneHash_size,
    BasicOrder_totalOriginalAdditionalRecipients_cdPtr,
    Common_amount_offset,
    Common_identifier_offset,
    Common_token_offset,
    generateOrder_base_tail_offset,
    generateOrder_context_head_offset,
    generateOrder_head_offset,
    generateOrder_maximumSpent_head_offset,
    generateOrder_minimumReceived_head_offset,
    generateOrder_selector_offset,
    generateOrder_selector,
    OneWord,
    OneWordShift,
    OnlyFullWordMask,
    OrderFulfilled_baseDataSize,
    OrderFulfilled_offer_length_baseOffset,
    OrderParameters_consideration_head_offset,
    OrderParameters_endTime_offset,
    OrderParameters_offer_head_offset,
    OrderParameters_startTime_offset,
    OrderParameters_zoneHash_offset,
    ratifyOrder_base_tail_offset,
    ratifyOrder_consideration_head_offset,
    ratifyOrder_context_head_offset,
    ratifyOrder_contractNonce_offset,
    ratifyOrder_head_offset,
    ratifyOrder_orderHashes_head_offset,
    ratifyOrder_selector_offset,
    ratifyOrder_selector,
    ReceivedItem_size,
    Selector_length,
    SixtyThreeBytes,
    SpentItem_size_shift,
    SpentItem_size,
    validateOrder_selector,
    validateOrder_selector_offset,
    ZoneParameters_base_tail_offset,
    ZoneParameters_basicOrderFixedElements_length,
    ZoneParameters_consideration_head_offset,
    ZoneParameters_endTime_offset,
    ZoneParameters_extraData_head_offset,
    ZoneParameters_fulfiller_offset,
    ZoneParameters_offer_head_offset,
    ZoneParameters_offerer_offset,
    ZoneParameters_orderHashes_head_offset,
    ZoneParameters_selectorAndPointer_length,
    ZoneParameters_startTime_offset,
    ZoneParameters_zoneHash_offset
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    BasicOrderParameters,
    OrderParameters
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {
    CalldataPointer,
    getFreeMemoryPointer,
    setFreeMemoryPointer,
    MemoryPointer,
    OffsetOrLengthMask
} from "seaport-types/src/helpers/PointerLibraries.sol";
contract ConsiderationEncoder {
    /**
     * @dev Takes a bytes array and casts it to a memory pointer.
     *
     * @param obj A bytes array in memory.
     *
     * @return ptr A memory pointer to the start of the bytes array in memory.
     */
    function toMemoryPointer(
        bytes memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Takes an array of bytes32 types and casts it to a memory pointer.
     *
     * @param obj An array of bytes32 types in memory.
     *
     * @return ptr A memory pointer to the start of the array of bytes32 types
     *             in memory.
     */
    function toMemoryPointer(
        bytes32[] memory obj
    ) internal pure returns (MemoryPointer ptr) {
        assembly {
            ptr := obj
        }
    }
    /**
     * @dev Takes a bytes array in memory and copies it to a new location in
     *      memory.
     *
     * @param src A memory pointer referencing the bytes array to be copied (and
     *            pointing to the length of the bytes array).
     * @param src A memory pointer referencing the location in memory to copy
     *            the bytes array to (and pointing to the length of the copied
     *            bytes array).
     *
     * @return size The size of the bytes array.
     */
    function _encodeBytes(
        MemoryPointer src,
        MemoryPointer dst
    ) internal view returns (uint256 size) {
        unchecked {
            // Mask the length of the bytes array to protect against overflow
            // and round up to the nearest word.
            // Note: `size` also includes the 1 word that stores the length.
            size = (src.readUint256() + SixtyThreeBytes) & OnlyFullWordMask;
            // Copy the bytes array to the new memory location.
            src.copy(dst, size);
        }
    }
    /**
     * @dev Takes an OrderParameters struct and a context bytes array in memory
     *      and encodes it as `generateOrder` calldata.
     *
     * @param orderParameters The OrderParameters struct used to construct the
     *                        encoded `generateOrder` calldata.
     * @param context         The context bytes array used to construct the
     *                        encoded `generateOrder` calldata.
     *
     * @return dst  A memory pointer referencing the encoded `generateOrder`
     *              calldata.
     * @return size The size of the bytes array.
     */
    function _encodeGenerateOrder(
        OrderParameters memory orderParameters,
        bytes memory context
    ) internal view returns (MemoryPointer dst, uint256 size) {
        // Get the memory pointer for the OrderParameters struct.
        MemoryPointer src = orderParameters.toMemoryPointer();
        // Get free memory pointer to write calldata to.
        dst = getFreeMemoryPointer();
        // Write generateOrder selector and get pointer to start of calldata.
        dst.write(generateOrder_selector);
        dst = dst.offset(generateOrder_selector_offset);
        // Get pointer to the beginning of the encoded data.
        MemoryPointer dstHead = dst.offset(generateOrder_head_offset);
        // Write `fulfiller` to calldata.
        dstHead.write(msg.sender);
        // Initialize tail offset, used to populate the minimumReceived array.
        uint256 tailOffset = generateOrder_base_tail_offset;
        // Write offset to minimumReceived.
        dstHead.offset(generateOrder_minimumReceived_head_offset).write(
            tailOffset
        );
        // Get memory pointer to `orderParameters.offer.length`.
        MemoryPointer srcOfferPointer = src
            .offset(OrderParameters_offer_head_offset)
            .readMemoryPointer();
        // Encode the offer array as a `SpentItem[]`.
        uint256 minimumReceivedSize = _encodeSpentItems(
            srcOfferPointer,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate maximumSpent array.
            tailOffset += minimumReceivedSize;
        }
        // Write offset to maximumSpent.
        dstHead.offset(generateOrder_maximumSpent_head_offset).write(
            tailOffset
        );
        // Get memory pointer to `orderParameters.consideration.length`.
        MemoryPointer srcConsiderationPointer = src
            .offset(OrderParameters_consideration_head_offset)
            .readMemoryPointer();
        // Encode the consideration array as a `SpentItem[]`.
        uint256 maximumSpentSize = _encodeSpentItems(
            srcConsiderationPointer,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate context array.
            tailOffset += maximumSpentSize;
        }
        // Write offset to context.
        dstHead.offset(generateOrder_context_head_offset).write(tailOffset);
        // Get memory pointer to context.
        MemoryPointer srcContext = toMemoryPointer(context);
        // Encode context as a bytes array.
        uint256 contextSize = _encodeBytes(
            srcContext,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment the tail offset, now used to determine final size.
            tailOffset += contextSize;
            // Derive the final size by including the selector.
            size = Selector_length + tailOffset;
        }
    }
    /**
     * @dev Takes an order hash (e.g. offerer shifted 96 bits to the left XOR'd
     *      with the contract nonce in the case of contract orders), an
     *      OrderParameters struct, context bytes array, and an array of order
     *      hashes for each order included as part of the current fulfillment
     *      and encodes it as `ratifyOrder` calldata.
     *
     * @param orderHash       The order hash (e.g. shl(0x60, offerer) ^ nonce).
     * @param orderParameters The OrderParameters struct used to construct the
     *                        encoded `ratifyOrder` calldata.
     * @param context         The context bytes array used to construct the
     *                        encoded `ratifyOrder` calldata.
     * @param orderHashes     An array of bytes32 values representing the order
     *                        hashes of all orders included as part of the
     *                        current fulfillment.
     * @param shiftedOfferer  The offerer for the order, shifted 96 bits to the
     *                        left.
     *
     * @return dst  A memory pointer referencing the encoded `ratifyOrder`
     *              calldata.
     * @return size The size of the bytes array.
     */
    function _encodeRatifyOrder(
        bytes32 orderHash, // e.g. shl(0x60, offerer) ^ contract nonce
        OrderParameters memory orderParameters,
        bytes memory context, // encoded based on the schemaID
        bytes32[] memory orderHashes,
        uint256 shiftedOfferer
    ) internal view returns (MemoryPointer dst, uint256 size) {
        // Get free memory pointer to write calldata to. This isn't allocated as
        // it is only used for a single function call.
        dst = getFreeMemoryPointer();
        // Write ratifyOrder selector and get pointer to start of calldata.
        dst.write(ratifyOrder_selector);
        dst = dst.offset(ratifyOrder_selector_offset);
        // Get pointer to the beginning of the encoded data.
        MemoryPointer dstHead = dst.offset(ratifyOrder_head_offset);
        // Write contractNonce to calldata via xor(orderHash, shiftedOfferer).
        dstHead.offset(ratifyOrder_contractNonce_offset).write(
            uint256(orderHash) ^ shiftedOfferer
        );
        // Initialize tail offset, used to populate the offer array.
        uint256 tailOffset = ratifyOrder_base_tail_offset;
        MemoryPointer src = orderParameters.toMemoryPointer();
        // Write offset to `offer`.
        dstHead.write(tailOffset);
        // Get memory pointer to `orderParameters.offer.length`.
        MemoryPointer srcOfferPointer = src
            .offset(OrderParameters_offer_head_offset)
            .readMemoryPointer();
        // Encode the offer array as a `SpentItem[]`.
        uint256 offerSize = _encodeSpentItems(
            srcOfferPointer,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate consideration array.
            tailOffset += offerSize;
        }
        // Write offset to consideration.
        dstHead.offset(ratifyOrder_consideration_head_offset).write(tailOffset);
        // Get pointer to `orderParameters.consideration.length`.
        MemoryPointer srcConsiderationPointer = src
            .offset(OrderParameters_consideration_head_offset)
            .readMemoryPointer();
        // Encode the consideration array as a `ReceivedItem[]`.
        uint256 considerationSize = _encodeConsiderationAsReceivedItems(
            srcConsiderationPointer,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate context array.
            tailOffset += considerationSize;
        }
        // Write offset to context.
        dstHead.offset(ratifyOrder_context_head_offset).write(tailOffset);
        // Encode context.
        uint256 contextSize = _encodeBytes(
            toMemoryPointer(context),
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate orderHashes array.
            tailOffset += contextSize;
        }
        // Write offset to orderHashes.
        dstHead.offset(ratifyOrder_orderHashes_head_offset).write(tailOffset);
        // Encode orderHashes.
        uint256 orderHashesSize = _encodeOrderHashes(
            toMemoryPointer(orderHashes),
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment the tail offset, now used to determine final size.
            tailOffset += orderHashesSize;
            // Derive the final size by including the selector.
            size = Selector_length + tailOffset;
        }
    }
    /**
     * @dev Takes an order hash, OrderParameters struct, extraData bytes array,
     *      and array of order hashes for each order included as part of the
     *      current fulfillment and encodes it as `authorizeOrder` calldata.
     *      Note that future, new versions of this contract may end up writing
     *      to a memory region that might have been potentially dirtied by the
     *      accumulator. Since the book-keeping for the accumulator does not
     *      update the free memory pointer, it will be necessary to ensure that
     *      all bytes in the memory in the range [dst, dst+size) are fully
     *      updated/written to in this function.
     *
     * @param orderHash       The order hash.
     * @param orderParameters The OrderParameters struct used to construct the
     *                        encoded `authorizeOrder` calldata.
     * @param extraData       The extraData bytes array used to construct the
     *                        encoded `authorizeOrder` calldata.
     * @param orderHashes     An array of bytes32 values representing the order
     *                        hashes of all available orders validated thus far
     *                        as part of current fulfillment.
     *                        Note that this differs from the orderHashes array
     *                        passed to `validateOrder` in that the latter
     *                        includes *all* available and validated orders
     *                        in the final fulfillment, as it is only a subset
     *                        of the final fulfilled orderHashes.
     *
     * @return dst  A memory pointer referencing the encoded `authorizeOrder`
     *              calldata.
     * @return size The size of the bytes array.
     */
    function _encodeAuthorizeOrder(
        bytes32 orderHash,
        OrderParameters memory orderParameters,
        bytes memory extraData,
        bytes32[] memory orderHashes,
        uint256 orderIndex
    ) internal view returns (MemoryPointer dst, uint256 size) {
        // Get free memory pointer to write calldata to.
        MemoryPointer ptr = getFreeMemoryPointer();
        dst = ptr;
        // Write authorizeOrder selector and get pointer to start of calldata.
        dst.write(authorizeOrder_selector);
        dst = dst.offset(authorizeOrder_selector_offset);
        // Get pointer to the beginning of the encoded data.
        MemoryPointer dstHead = dst.offset(authorizeOrder_head_offset);
        // Write offset to zoneParameters to start of calldata.
        dstHead.write(authorizeOrder_zoneParameters_offset);
        // Reuse `dstHead` as pointer to zoneParameters.
        dstHead = dstHead.offset(authorizeOrder_zoneParameters_offset);
        // Write orderHash and fulfiller to zoneParameters.
        dstHead.writeBytes32(orderHash);
        dstHead.offset(ZoneParameters_fulfiller_offset).write(msg.sender);
        // Get the memory pointer to the order parameters struct.
        MemoryPointer src = orderParameters.toMemoryPointer();
        // Copy offerer, startTime, endTime and zoneHash to zoneParameters.
        dstHead.offset(ZoneParameters_offerer_offset).write(src.readUint256());
        dstHead.offset(ZoneParameters_startTime_offset).write(
            src.offset(OrderParameters_startTime_offset).readUint256()
        );
        dstHead.offset(ZoneParameters_endTime_offset).write(
            src.offset(OrderParameters_endTime_offset).readUint256()
        );
        dstHead.offset(ZoneParameters_zoneHash_offset).write(
            src.offset(OrderParameters_zoneHash_offset).readUint256()
        );
        // Initialize tail offset, used to populate the offer array.
        uint256 tailOffset = ZoneParameters_base_tail_offset;
        // Write offset to `offer`.
        dstHead.offset(ZoneParameters_offer_head_offset).write(tailOffset);
        // Get pointer to `orderParameters.offer.length`.
        MemoryPointer srcOfferPointer = src
            .offset(OrderParameters_offer_head_offset)
            .readMemoryPointer();
        // Encode the offer array as a `SpentItem[]`.
        uint256 offerSize = _encodeSpentItems(
            srcOfferPointer,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate consideration array.
            tailOffset += offerSize;
        }
        // Write offset to consideration.
        dstHead.offset(ZoneParameters_consideration_head_offset).write(
            tailOffset
        );
        // Get pointer to `orderParameters.consideration.length`.
        MemoryPointer srcConsiderationPointer = src
            .offset(OrderParameters_consideration_head_offset)
            .readMemoryPointer();
        // Encode the consideration array as a `ReceivedItem[]`.
        uint256 considerationSize = _encodeConsiderationAsReceivedItems(
            srcConsiderationPointer,
            dstHead.offset(tailOffset)
        );
        unchecked {
            // Increment tail offset, now used to populate extraData array.
            tailOffset += considerationSize;
        }
        // Write offset to extraData.
        dstHead.offset(ZoneParameters_extraData_head_offset).write(tailOffset);
        unchecked {
            // Copy extraData.
            uint256 extraDataSize = _encodeBytes(
                toMemoryPointer(extraData),
                dstHead.offset(tailOffset)
            );
            // Increment tail offset, now used to populate orderHashes array.
            tailOffset += extraDataSize;
        }
        // Write offset to orderHashes.
        dstHead.offset(ZoneParameters_orderHashes_head_offset).write(
            tailOffset
        );
        // Encode the order hashes array.
        MemoryPointer orderHashesLengthLocation = dstHead.offset(tailOffset);
        unchecked {
            uint256 orderHashesSize = _encodeOrderHashes(
                toMemoryPointer(orderHashes),
                orderHashesLengthLocation
            );
            // Increment the tail offset, now used to determine final size.
            tailOffset += orderHashesSize;
            // Derive final size including selector and ZoneParameters pointer.
            size = ZoneParameters_selectorAndPointer_length + tailOffset;
        }
        // Update the free memory pointer.
        setFreeMemoryPointer(dst.offset(size));
        // Track the pointer, size (when performing validateOrder) and pointer
        // to orderHashes length by overriding the salt value on the order.
        orderParameters.salt = ((MemoryPointer.unwrap(ptr) << 128) |
            (size << 64) |
            MemoryPointer.unwrap(orderHashesLengthLocation));
        // Write the shortened orderHashes array length.
        orderHashesLengthLocation.write(orderIndex);
        // Modify encoding size to account for the shorter orderHashes array.
        size -= (orderHashes.length - orderIndex) << OneWordShift;
    }
    /**
     * @dev Takes an order hash, OrderParameters struct, extraData bytes array,
     *      and array of order hashes for each order included as part of the
     *      current fulfillment and encodes it as `validateOrder` calldata.
     *      Note that future, new versions of this contract may end up writing
     *      to a memory region that might have been potentially dirtied by the
     *      accumulator. Since the book-keeping for the accumulator does not
     *      update the free memory pointer, it will be necessary to ensure that
     *      all bytes in the memory in the range [dst, dst+size) are fully
     *      updated/written to in this function.
     *
     * @param salt            The salt on the order, which has been repurposed
     *                        to contain relevant pointers and encoding size.
     * @param orderHashes     An array of bytes32 values representing the order
     *                        hashes of all orders included as part of the
     *                        current fulfillment.
     *
     * @return dst  A memory pointer referencing the encoded `validateOrder`
     *              calldata.
     * @return size The size of the bytes array.
     */
    function _encodeValidateOrder(
        uint256 salt,
        bytes32[] memory orderHashes
    ) internal view returns (MemoryPointer dst, uint256 size) {
        dst = MemoryPointer.wrap(salt >> 128);
        size = (salt >> 64) & OffsetOrLengthMask;
        MemoryPointer orderHashesLengthLocation = MemoryPointer.wrap(
            salt & OffsetOrLengthMask
        );
        // Write validateOrder selector.
        dst.write(validateOrder_selector);
        dst = dst.offset(validateOrder_selector_offset);
        // Encode the order hashes array. Note that this currently modifies
        // order hashes that are known to be properly encoded already and could
        // therefore be skipped.
        _encodeOrderHashes(
            toMemoryPointer(orderHashes),
            orderHashesLengthLocation
        );
    }
    /**
     * @dev Takes an order hash and BasicOrderParameters struct (from calldata)
     *      and encodes it as `authorizeOrder` calldata. Note that memory data
     *      is reused from `OrderFulfilled` event data, and the rest of the
     *      calldata is prefixed and postfixed to this memory region. Note that
     *      the memory region before the spent and received items on the
     *      `OrderFulfilled` event are overwritten, which implies that this
     *      function will need to be modified should the layout of that event
     *      data change in the future.
     *
     * @param orderHash  The order hash.
     *
     * @return ptr  A memory pointer referencing the encoded `authorizeOrder`
     *              calldata with extra padding at the start to word align.
     * @return size The size of the bytes array.
     */
    function _encodeAuthorizeBasicOrder(
        bytes32 orderHash
    )
        internal
        view
        returns (
            MemoryPointer ptr,
            uint256 size,
            uint256 memoryLocationForOrderHashes
        )
    {
        unchecked {
            // Derive offset to pre `OrderFulfilled`'s spent item event data
            // using base offset & total original recipients.
            ptr = MemoryPointer.wrap(
                authorizeOrder_calldata_baseOffset +
                    (CalldataPointer
                        .wrap(
                            BasicOrder_totalOriginalAdditionalRecipients_cdPtr
                        )
                        .readUint256() << OneWordShift)
            );
        }
        MemoryPointer dst = ptr;
        // Write authorizeOrder selector and get pointer to start of calldata.
        dst.write(authorizeOrder_selector);
        dst = dst.offset(authorizeOrder_selector_offset);
        // Get pointer to the beginning of the encoded data.
        MemoryPointer dstHead = dst.offset(authorizeOrder_head_offset);
        // Write offset to zoneParameters to start of calldata.
        dstHead.write(authorizeOrder_zoneParameters_offset);
        // Reuse `dstHead` as pointer to zoneParameters.
        dstHead = dstHead.offset(authorizeOrder_zoneParameters_offset);
        // Write offerer, orderHash and fulfiller to zoneParameters.
        dstHead.writeBytes32(orderHash);
        dstHead.offset(ZoneParameters_fulfiller_offset).write(msg.sender);
        dstHead.offset(ZoneParameters_offerer_offset).write(
            CalldataPointer.wrap(BasicOrder_offerer_cdPtr).readAddress()
        );
        // Copy startTime, endTime and zoneHash to zoneParameters.
        CalldataPointer.wrap(BasicOrder_startTime_cdPtr).copy(
            dstHead.offset(ZoneParameters_startTime_offset),
            BasicOrder_startTimeThroughZoneHash_size
        );
        // Initialize tail offset, used for the offer + consideration arrays.
        uint256 tailOffset = ZoneParameters_base_tail_offset;
        // Write offset to offer from event data into target calldata.
        dstHead.offset(ZoneParameters_offer_head_offset).write(tailOffset);
        unchecked {
            // Write consideration offset next (located 5 words after offer).
            dstHead.offset(ZoneParameters_consideration_head_offset).write(
                tailOffset + BasicOrder_consideration_offset_from_offer
            );
            // Retrieve the length of additional recipients.
            uint256 additionalRecipientsLength = CalldataPointer
                .wrap(BasicOrder_addlRecipients_length_cdPtr)
                .readUint256();
            // Derive size of offer and consideration data.
            // 2 words (lengths) + 4 (offer data) + 5 (consideration 1) + 5 * ar
            uint256 offerAndConsiderationSize = OrderFulfilled_baseDataSize +
                (additionalRecipientsLength * ReceivedItem_size);
            // Increment tail offset, now used to populate extraData array.
            tailOffset += offerAndConsiderationSize;
        }
        // Write empty bytes for extraData.
        dstHead.offset(ZoneParameters_extraData_head_offset).write(tailOffset);
        dstHead.offset(tailOffset).write(0);
        unchecked {
            // Increment tail offset, now used to populate orderHashes array.
            tailOffset += OneWord;
        }
        // Write offset to orderHashes.
        dstHead.offset(ZoneParameters_orderHashes_head_offset).write(
            tailOffset
        );
        memoryLocationForOrderHashes = MemoryPointer.unwrap(
            dstHead.offset(tailOffset)
        );
        // Write length = 0 to the orderHashes array.
        dstHead.offset(tailOffset).write(0);
        unchecked {
            // Write the single order hash to the orderHashes array.
            dstHead.offset(tailOffset + OneWord).writeBytes32(orderHash);
            // Final size: selector, ZoneParameters pointer, orderHashes & tail.
            size = ZoneParameters_basicOrderFixedElements_length + tailOffset;
        }
    }
    /**
     * @dev Takes pointers to already-encoded data and modifies it so that
     *      it is properly formatted for a `validateOrder` call.
     *
     * @param dst                          A memory pointer referencing the
     *                                     encoded `validateOrder` calldata.
     * @param memoryLocationForOrderHashes A memory pointer referencing where
     *                                     to encode orderHashes length of 1.
     */
    function _encodeValidateBasicOrder(
        MemoryPointer dst,
        uint256 memoryLocationForOrderHashes
    ) internal pure {
        // Write validateOrder selector and get pointer to start of calldata.
        dst.write(validateOrder_selector);
        // Write length = 1 to the orderHashes array. Note that size should now
        // be one word larger than the provided size.
        MemoryPointer.wrap(memoryLocationForOrderHashes).write(1);
    }
    /**
     * @dev Takes a memory pointer to an array of bytes32 values representing
     *      the order hashes included as part of the fulfillment and a memory
     *      pointer to a location to copy it to, and copies the source data to
     *      the destination in memory.
     *
     * @param srcLength A memory pointer referencing the order hashes array to
     *                  be copied (and pointing to the length of the array).
     * @param dstLength A memory pointer referencing the location in memory to
     *                  copy the orderHashes array to (and pointing to the
     *                  length of the copied array).
     *
     * @return size The size of the order hashes array (including the length).
     */
    function _encodeOrderHashes(
        MemoryPointer srcLength,
        MemoryPointer dstLength
    ) internal view returns (uint256 size) {
        // Read length of the array from source and write to destination.
        uint256 length = srcLength.readUint256();
        dstLength.write(length);
        unchecked {
            // Determine head & tail size as one word per element in the array.
            uint256 headAndTailSize = length << OneWordShift;
            // Copy the tail starting from the next element of the source to the
            // next element of the destination.
            srcLength.next().copy(dstLength.next(), headAndTailSize);
            // Set size to the length of the tail plus one word for length.
            size = headAndTailSize + OneWord;
        }
    }
    /**
     * @dev Takes a memory pointer to an offer or consideration array and a
     *      memory pointer to a location to copy it to, and copies the source
     *      data to the destination in memory as a SpentItem array.
     *
     * @param srcLength A memory pointer referencing the offer or consideration
     *                  array to be copied as a SpentItem array (and pointing to
     *                  the length of the original array).
     * @param dstLength A memory pointer referencing the location in memory to
     *                  copy the offer array to (and pointing to the length of
     *                  the copied array).
     *
     * @return size The size of the SpentItem array (including the length).
     */
    function _encodeSpentItems(
        MemoryPointer srcLength,
        MemoryPointer dstLength
    ) internal pure returns (uint256 size) {
        assembly {
            // Read length of the array from source and write to destination.
            let length := mload(srcLength)
            mstore(dstLength, length)
            // Get pointer to first item's head position in the array,
            // containing the item's pointer in memory. The head pointer will be
            // incremented until it reaches the tail position (start of the
            // array data).
            let mPtrHead := add(srcLength, OneWord)
            // Position in memory to write next item for calldata. Since
            // SpentItem has a fixed length, the array elements do not contain
            // head elements in calldata, they are concatenated together after
            // the array length.
            let cdPtrData := add(dstLength, OneWord)
            // Pointer to end of array head in memory.
            let mPtrHeadEnd := add(mPtrHead, shl(OneWordShift, length))
            for {
            } lt(mPtrHead, mPtrHeadEnd) {
            } {
                // Read pointer to data for array element from head position.
                let mPtrTail := mload(mPtrHead)
                // Copy itemType, token, identifier, amount to calldata.
                mstore(cdPtrData, mload(mPtrTail))
                mstore(
                    add(cdPtrData, Common_token_offset),
                    mload(add(mPtrTail, Common_token_offset))
                )
                mstore(
                    add(cdPtrData, Common_identifier_offset),
                    mload(add(mPtrTail, Common_identifier_offset))
                )
                mstore(
                    add(cdPtrData, Common_amount_offset),
                    mload(add(mPtrTail, Common_amount_offset))
                )
                mPtrHead := add(mPtrHead, OneWord)
                cdPtrData := add(cdPtrData, SpentItem_size)
            }
            size := add(OneWord, shl(SpentItem_size_shift, length))
        }
    }
    /**
     * @dev Takes a memory pointer to an consideration array and a memory
     *      pointer to a location to copy it to, and copies the source data to
     *      the destination in memory as a ReceivedItem array.
     *
     * @param srcLength A memory pointer referencing the consideration array to
     *                  be copied as a ReceivedItem array (and pointing to the
     *                  length of the original array).
     * @param dstLength A memory pointer referencing the location in memory to
     *                  copy the consideration array to as a ReceivedItem array
     *                  (and pointing to the length of the new array).
     *
     * @return size The size of the ReceivedItem array (including the length).
     */
    function _encodeConsiderationAsReceivedItems(
        MemoryPointer srcLength,
        MemoryPointer dstLength
    ) internal view returns (uint256 size) {
        unchecked {
            // Read length of the array from source and write to destination.
            uint256 length = srcLength.readUint256();
            dstLength.write(length);
            // Get pointer to first item's head position in the array,
            // containing the item's pointer in memory. The head pointer will be
            // incremented until it reaches the tail position (start of the
            // array data).
            MemoryPointer srcHead = srcLength.next();
            MemoryPointer srcHeadEnd = srcHead.offset(length << OneWordShift);
            // Position in memory to write next item for calldata. Since
            // ReceivedItem has a fixed length, the array elements do not
            // contain offsets in calldata, they are concatenated together after
            // the array length.
            MemoryPointer dstHead = dstLength.next();
            while (srcHead.lt(srcHeadEnd)) {
                MemoryPointer srcTail = srcHead.pptr();
                srcTail.copy(dstHead, ReceivedItem_size);
                srcHead = srcHead.next();
                dstHead = dstHead.offset(ReceivedItem_size);
            }
            size = OneWord + (length * ReceivedItem_size);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import { ConduitItemType } from "./ConduitEnums.sol";
/**
 * @dev A ConduitTransfer is a struct that contains the information needed for a
 *      conduit to transfer an item from one address to another.
 */
struct ConduitTransfer {
    ConduitItemType itemType;
    address token;
    address from;
    address to;
    uint256 identifier;
    uint256 amount;
}
/**
 * @dev A ConduitBatch1155Transfer is a struct that contains the information
 *      needed for a conduit to transfer a batch of ERC-1155 tokens from one
 *      address to another.
 */
struct ConduitBatch1155Transfer {
    address token;
    address from;
    address to;
    uint256[] ids;
    uint256[] amounts;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    OrderParameters
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import { GettersAndDerivers } from "./GettersAndDerivers.sol";
import {
    TokenTransferrerErrors
} from "seaport-types/src/interfaces/TokenTransferrerErrors.sol";
import { CounterManager } from "./CounterManager.sol";
import {
    AdditionalRecipient_size_shift,
    AddressDirtyUpperBitThreshold,
    BasicOrder_additionalRecipients_head_cdPtr,
    BasicOrder_additionalRecipients_head_ptr,
    BasicOrder_addlRecipients_length_cdPtr,
    BasicOrder_basicOrderType_cdPtr,
    BasicOrder_basicOrderType_range,
    BasicOrder_considerationToken_cdPtr,
    BasicOrder_offerer_cdPtr,
    BasicOrder_offerToken_cdPtr,
    BasicOrder_parameters_cdPtr,
    BasicOrder_parameters_ptr,
    BasicOrder_signature_cdPtr,
    BasicOrder_signature_ptr,
    BasicOrder_zone_cdPtr
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    Error_selector_offset,
    MissingItemAmount_error_length,
    MissingItemAmount_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
import {
    _revertInvalidBasicOrderParameterEncoding,
    _revertMissingOriginalConsiderationItems
} from "seaport-types/src/lib/ConsiderationErrors.sol";
/**
 * @title Assertions
 * @author 0age
 * @notice Assertions contains logic for making various assertions that do not
 *         fit neatly within a dedicated semantic scope.
 */
contract Assertions is
    GettersAndDerivers,
    CounterManager,
    TokenTransferrerErrors
{
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(
        address conduitController
    ) GettersAndDerivers(conduitController) {}
    /**
     * @dev Internal view function to ensure that the supplied consideration
     *      array length on a given set of order parameters is not less than the
     *      original consideration array length for that order and to retrieve
     *      the current counter for a given order's offerer and zone and use it
     *      to derive the order hash.
     *
     * @param orderParameters The parameters of the order to hash.
     *
     * @return The hash.
     */
    function _assertConsiderationLengthAndGetOrderHash(
        OrderParameters memory orderParameters
    ) internal view returns (bytes32) {
        // Ensure supplied consideration array length is not less than original.
        _assertConsiderationLengthIsNotLessThanOriginalConsiderationLength(
            orderParameters.consideration.length,
            orderParameters.totalOriginalConsiderationItems
        );
        // Derive and return order hash using current counter for the offerer.
        return
            _deriveOrderHash(
                orderParameters,
                _getCounter(orderParameters.offerer)
            );
    }
    /**
     * @dev Internal pure function to ensure that the supplied consideration
     *      array length for an order to be fulfilled is not less than the
     *      original consideration array length for that order.
     *
     * @param suppliedConsiderationItemTotal The number of consideration items
     *                                       supplied when fulfilling the order.
     * @param originalConsiderationItemTotal The number of consideration items
     *                                       supplied on initial order creation.
     */
    function _assertConsiderationLengthIsNotLessThanOriginalConsiderationLength(
        uint256 suppliedConsiderationItemTotal,
        uint256 originalConsiderationItemTotal
    ) internal pure {
        // Ensure supplied consideration array length is not less than original.
        if (suppliedConsiderationItemTotal < originalConsiderationItemTotal) {
            _revertMissingOriginalConsiderationItems();
        }
    }
    /**
     * @dev Internal pure function to ensure that a given item amount is not
     *      zero.
     *
     * @param amount The amount to check.
     */
    function _assertNonZeroAmount(uint256 amount) internal pure {
        assembly {
            if iszero(amount) {
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, MissingItemAmount_error_selector)
                // revert(abi.encodeWithSignature("MissingItemAmount()"))
                revert(Error_selector_offset, MissingItemAmount_error_length)
            }
        }
    }
    /**
     * @dev Internal pure function to validate calldata offsets for dynamic
     *      types in BasicOrderParameters and other parameters. This ensures
     *      that functions using the calldata object normally will be using the
     *      same data as the assembly functions and that values that are bound
     *      to a given range are within that range. Note that no parameters are
     *      supplied as all basic order functions use the same calldata
     *      encoding.
     */
    function _assertValidBasicOrderParameters() internal pure {
        // Declare a boolean designating basic order parameter offset validity.
        bool validOffsets;
        // Utilize assembly in order to read offset data directly from calldata.
        assembly {
            /*
             * Checks:
             * 1. Order parameters struct offset == 0x20
             * 2. Additional recipients arr offset == 0x240
             * 3. Signature offset == 0x260 + (recipients.length * 0x40)
             * 4. BasicOrderType between 0 and 23 (i.e. < 24)
             * 5. Offerer, zone, offer token, and consideration token have no
             *    upper dirty bits — each argument is type(uint160).max or less
             */
            validOffsets := and(
                and(
                    and(
                        // Order parameters at cd 0x04 offset = 0x20.
                        eq(
                            calldataload(BasicOrder_parameters_cdPtr),
                            BasicOrder_parameters_ptr
                        ),
                        // Additional recipients at cd 0x224 offset = 0x240.
                        eq(
                            calldataload(
                                BasicOrder_additionalRecipients_head_cdPtr
                            ),
                            BasicOrder_additionalRecipients_head_ptr
                        )
                    ),
                    // Signature offset = 0x260 + recipients.length * 0x40.
                    eq(
                        // Load signature offset from calldata 0x244.
                        calldataload(BasicOrder_signature_cdPtr),
                        // Expected offset = start of recipients + len * 64.
                        add(
                            BasicOrder_signature_ptr,
                            shl(
                                // Each additional recipient length = 0x40.
                                AdditionalRecipient_size_shift,
                                // Additional recipients length at cd 0x264.
                                calldataload(
                                    BasicOrder_addlRecipients_length_cdPtr
                                )
                            )
                        )
                    )
                ),
                and(
                    // Ensure BasicOrderType parameter is less than 0x18.
                    lt(
                        // BasicOrderType parameter = calldata offset 0x124.
                        calldataload(BasicOrder_basicOrderType_cdPtr),
                        // Value should be less than 24.
                        BasicOrder_basicOrderType_range
                    ),
                    // Ensure no dirty upper bits are present on offerer,
                    // zone, offer token, or consideration token.
                    lt(
                        or(
                            or(
                                // Offerer parameter = calldata offset 0x84.
                                calldataload(BasicOrder_offerer_cdPtr),
                                // Zone parameter = calldata offset 0xa4.
                                calldataload(BasicOrder_zone_cdPtr)
                            ),
                            or(
                                // Offer token parameter = cd offset 0xc4.
                                calldataload(BasicOrder_offerToken_cdPtr),
                                // Consideration parameter = offset 0x24.
                                calldataload(
                                    BasicOrder_considerationToken_cdPtr
                                )
                            )
                        ),
                        AddressDirtyUpperBitThreshold
                    )
                )
            )
        }
        // Revert with an error if basic order parameter offsets are invalid.
        if (!validOffsets) {
            _revertInvalidBasicOrderParameterEncoding();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    SignatureVerificationErrors
} from "seaport-types/src/interfaces/SignatureVerificationErrors.sol";
import { LowLevelHelpers } from "./LowLevelHelpers.sol";
import {
    ECDSA_MaxLength,
    ECDSA_signature_s_offset,
    ECDSA_signature_v_offset,
    ECDSA_twentySeventhAndTwentyEighthBytesSet,
    Ecrecover_args_size,
    Ecrecover_precompile,
    EIP1271_isValidSignature_calldata_baseLength,
    EIP1271_isValidSignature_digest_negativeOffset,
    EIP1271_isValidSignature_selector_negativeOffset,
    EIP1271_isValidSignature_selector,
    EIP1271_isValidSignature_signature_head_offset,
    EIP2098_allButHighestBitMask,
    MaxUint8,
    OneWord,
    Signature_lower_v
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    BadContractSignature_error_length,
    BadContractSignature_error_selector,
    BadSignatureV_error_length,
    BadSignatureV_error_selector,
    BadSignatureV_error_v_ptr,
    Error_selector_offset,
    InvalidSignature_error_length,
    InvalidSignature_error_selector,
    InvalidSigner_error_length,
    InvalidSigner_error_selector
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
/**
 * @title SignatureVerification
 * @author 0age
 * @notice SignatureVerification contains logic for verifying signatures.
 */
contract SignatureVerification is SignatureVerificationErrors, LowLevelHelpers {
    /**
     * @dev Internal view function to verify the signature of an order. An
     *      ERC-1271 fallback will be attempted if either the signature length
     *      is not 64 or 65 bytes or if the recovered signer does not match the
     *      supplied signer.
     *
     * @param signer                  The signer for the order.
     * @param digest                  The digest to verify signature against.
     * @param originalDigest          The original digest to verify signature
     *                                against.
     * @param originalSignatureLength The original signature length.
     * @param signature               A signature from the signer indicating
     *                                that the order has been approved.
     */
    function _assertValidSignature(
        address signer,
        bytes32 digest,
        bytes32 originalDigest,
        uint256 originalSignatureLength,
        bytes memory signature
    ) internal view {
        // Declare value for ecrecover equality or 1271 call success status.
        bool success;
        // Utilize assembly to perform optimized signature verification check.
        assembly {
            // Ensure that first word of scratch space is empty.
            mstore(0, 0)
            // Get the length of the signature.
            let signatureLength := mload(signature)
            // Get the pointer to the value preceding the signature length.
            // This will be used for temporary memory overrides - either the
            // signature head for isValidSignature or the digest for ecrecover.
            let wordBeforeSignaturePtr := sub(signature, OneWord)
            // Cache the current value behind the signature to restore it later.
            let cachedWordBeforeSignature := mload(wordBeforeSignaturePtr)
            // Declare lenDiff + recoveredSigner scope to manage stack pressure.
            {
                // Take the difference between the max ECDSA signature length
                // and the actual signature length. Overflow desired for any
                // values > 65. If the diff is not 0 or 1, it is not a valid
                // ECDSA signature - move on to EIP1271 check.
                let lenDiff := sub(ECDSA_MaxLength, signatureLength)
                // Declare variable for recovered signer.
                let recoveredSigner
                // If diff is 0 or 1, it may be an ECDSA signature.
                // Try to recover signer.
                if iszero(gt(lenDiff, 1)) {
                    // Read the signature `s` value.
                    let originalSignatureS := mload(
                        add(signature, ECDSA_signature_s_offset)
                    )
                    // Read the first byte of the word after `s`. If the
                    // signature is 65 bytes, this will be the real `v` value.
                    // If not, it will need to be modified - doing it this way
                    // saves an extra condition.
                    let v := byte(
                        0,
                        mload(add(signature, ECDSA_signature_v_offset))
                    )
                    // If lenDiff is 1, parse 64-byte signature as ECDSA.
                    if lenDiff {
                        // Extract yParity from highest bit of vs and add 27 to
                        // get v.
                        v := add(
                            shr(MaxUint8, originalSignatureS),
                            Signature_lower_v
                        )
                        // Extract canonical s from vs, all but the highest bit.
                        // Temporarily overwrite the original `s` value in the
                        // signature.
                        mstore(
                            add(signature, ECDSA_signature_s_offset),
                            and(
                                originalSignatureS,
                                EIP2098_allButHighestBitMask
                            )
                        )
                    }
                    // Temporarily overwrite the signature length with `v` to
                    // conform to the expected input for ecrecover.
                    mstore(signature, v)
                    // Temporarily overwrite the word before the length with
                    // `digest` to conform to the expected input for ecrecover.
                    mstore(wordBeforeSignaturePtr, digest)
                    // Attempt to recover the signer for the given signature. Do
                    // not check the call status as ecrecover will return a null
                    // address if the signature is invalid.
                    pop(
                        staticcall(
                            gas(),
                            Ecrecover_precompile, // Call ecrecover precompile.
                            wordBeforeSignaturePtr, // Use data memory location.
                            Ecrecover_args_size, // Size of digest, v, r, and s.
                            0, // Write result to scratch space.
                            OneWord // Provide size of returned result.
                        )
                    )
                    // Restore cached word before signature.
                    mstore(wordBeforeSignaturePtr, cachedWordBeforeSignature)
                    // Restore cached signature length.
                    mstore(signature, signatureLength)
                    // Restore cached signature `s` value.
                    mstore(
                        add(signature, ECDSA_signature_s_offset),
                        originalSignatureS
                    )
                    // Read the recovered signer from the buffer given as return
                    // space for ecrecover.
                    recoveredSigner := mload(0)
                }
                // Set success to true if the signature provided was a valid
                // ECDSA signature and the signer is not the null address. Use
                // gt instead of direct as success is used outside of assembly.
                success := and(eq(signer, recoveredSigner), gt(signer, 0))
            }
            // If the signature was not verified with ecrecover, try EIP1271.
            if iszero(success) {
                // Reset the original signature length.
                mstore(signature, originalSignatureLength)
                // Temporarily overwrite the word before the signature length
                // and use it as the head of the signature input to
                // `isValidSignature`, which has a value of 64.
                mstore(
                    wordBeforeSignaturePtr,
                    EIP1271_isValidSignature_signature_head_offset
                )
                // Get pointer to use for the selector of `isValidSignature`.
                let selectorPtr := sub(
                    signature,
                    EIP1271_isValidSignature_selector_negativeOffset
                )
                // Cache the value currently stored at the selector pointer.
                let cachedWordOverwrittenBySelector := mload(selectorPtr)
                // Cache the value currently stored at the digest pointer.
                let cachedWordOverwrittenByDigest := mload(
                    sub(
                        signature,
                        EIP1271_isValidSignature_digest_negativeOffset
                    )
                )
                // Write the selector first, since it overlaps the digest.
                mstore(selectorPtr, EIP1271_isValidSignature_selector)
                // Next, write the original digest.
                mstore(
                    sub(
                        signature,
                        EIP1271_isValidSignature_digest_negativeOffset
                    ),
                    originalDigest
                )
                // Call signer with `isValidSignature` to validate signature.
                success := staticcall(
                    gas(),
                    signer,
                    selectorPtr,
                    add(
                        originalSignatureLength,
                        EIP1271_isValidSignature_calldata_baseLength
                    ),
                    0,
                    OneWord
                )
                // Determine if the signature is valid on successful calls.
                if success {
                    // If first word of scratch space does not contain EIP-1271
                    // signature selector, revert.
                    if iszero(eq(mload(0), EIP1271_isValidSignature_selector)) {
                        // Revert with bad 1271 signature if signer has code.
                        if extcodesize(signer) {
                            // Bad contract signature.
                            // Store left-padded selector with push4, mem[28:32]
                            mstore(0, BadContractSignature_error_selector)
                            // revert(abi.encodeWithSignature(
                            //     "BadContractSignature()"
                            // ))
                            revert(
                                Error_selector_offset,
                                BadContractSignature_error_length
                            )
                        }
                        // Check if signature length was invalid.
                        if gt(sub(ECDSA_MaxLength, signatureLength), 1) {
                            // Revert with generic invalid signature error.
                            // Store left-padded selector with push4, mem[28:32]
                            mstore(0, InvalidSignature_error_selector)
                            // revert(abi.encodeWithSignature(
                            //     "InvalidSignature()"
                            // ))
                            revert(
                                Error_selector_offset,
                                InvalidSignature_error_length
                            )
                        }
                        // Check if v was invalid.
                        if and(
                            eq(signatureLength, ECDSA_MaxLength),
                            iszero(
                                byte(
                                    byte(
                                        0,
                                        mload(
                                            add(
                                                signature,
                                                ECDSA_signature_v_offset
                                            )
                                        )
                                    ),
                                    ECDSA_twentySeventhAndTwentyEighthBytesSet
                                )
                            )
                        ) {
                            // Revert with invalid v value.
                            // Store left-padded selector with push4, mem[28:32]
                            mstore(0, BadSignatureV_error_selector)
                            mstore(
                                BadSignatureV_error_v_ptr,
                                byte(
                                    0,
                                    mload(
                                        add(signature, ECDSA_signature_v_offset)
                                    )
                                )
                            )
                            // revert(abi.encodeWithSignature(
                            //     "BadSignatureV(uint8)", v
                            // ))
                            revert(
                                Error_selector_offset,
                                BadSignatureV_error_length
                            )
                        }
                        // Revert with generic invalid signer error message.
                        // Store left-padded selector with push4, mem[28:32]
                        mstore(0, InvalidSigner_error_selector)
                        // revert(abi.encodeWithSignature("InvalidSigner()"))
                        revert(
                            Error_selector_offset,
                            InvalidSigner_error_length
                        )
                    }
                }
                // Restore the cached values overwritten by selector, digest and
                // signature head.
                mstore(wordBeforeSignaturePtr, cachedWordBeforeSignature)
                mstore(selectorPtr, cachedWordOverwrittenBySelector)
                mstore(
                    sub(
                        signature,
                        EIP1271_isValidSignature_digest_negativeOffset
                    ),
                    cachedWordOverwrittenByDigest
                )
            }
        }
        // If the call failed...
        if (!success) {
            // Revert and pass reason along if one was returned.
            _revertWithReasonIfOneIsReturned();
            // Otherwise, revert with error indicating bad contract signature.
            assembly {
                // Store left-padded selector with push4, mem[28:32] = selector
                mstore(0, BadContractSignature_error_selector)
                // revert(abi.encodeWithSignature("BadContractSignature()"))
                revert(Error_selector_offset, BadContractSignature_error_length)
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/*
 * -------------------------- Disambiguation & Other Notes ---------------------
 *    - The term "head" is used as it is in the documentation for ABI encoding,
 *      but only in reference to dynamic types, i.e. it always refers to the
 *      offset or pointer to the body of a dynamic type. In calldata, the head
 *      is always an offset (relative to the parent object), while in memory,
 *      the head is always the pointer to the body. More information found here:
 *      https://docs.soliditylang.org/en/v0.8.17/abi-spec.html#argument-encoding
 *        - Note that the length of an array is separate from and precedes the
 *          head of the array.
 *
 *    - The term "body" is used in place of the term "head" used in the ABI
 *      documentation. It refers to the start of the data for a dynamic type,
 *      e.g. the first word of a struct or the first word of the first element
 *      in an array.
 *
 *    - The term "pointer" is used to describe the absolute position of a value
 *      and never an offset relative to another value.
 *        - The suffix "_ptr" refers to a memory pointer.
 *        - The suffix "_cdPtr" refers to a calldata pointer.
 *
 *    - The term "offset" is used to describe the position of a value relative
 *      to some parent value. For example, OrderParameters_conduit_offset is the
 *      offset to the "conduit" value in the OrderParameters struct relative to
 *      the start of the body.
 *        - Note: Offsets are used to derive pointers.
 *
 *    - Some structs have pointers defined for all of their fields in this file.
 *      Lines which are commented out are fields that are not used in the
 *      codebase but have been left in for readability.
 */
uint256 constant ThirtyOneBytes = 0x1f;
uint256 constant OneWord = 0x20;
uint256 constant TwoWords = 0x40;
uint256 constant ThreeWords = 0x60;
uint256 constant OneWordShift = 0x5;
uint256 constant TwoWordsShift = 0x6;
uint256 constant FreeMemoryPointerSlot = 0x40;
uint256 constant ZeroSlot = 0x60;
uint256 constant DefaultFreeMemoryPointer = 0x80;
uint256 constant Slot0x80 = 0x80;
uint256 constant Slot0xA0 = 0xa0;
uint256 constant Slot0xC0 = 0xc0;
uint256 constant Generic_error_selector_offset = 0x1c;
// abi.encodeWithSignature("transferFrom(address,address,uint256)")
uint256 constant ERC20_transferFrom_signature = (
    0x23b872dd00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC20_transferFrom_sig_ptr = 0x0;
uint256 constant ERC20_transferFrom_from_ptr = 0x04;
uint256 constant ERC20_transferFrom_to_ptr = 0x24;
uint256 constant ERC20_transferFrom_amount_ptr = 0x44;
uint256 constant ERC20_transferFrom_length = 0x64; // 4 + 32 * 3 == 100
// abi.encodeWithSignature(
//     "safeTransferFrom(address,address,uint256,uint256,bytes)"
// )
uint256 constant ERC1155_safeTransferFrom_signature = (
    0xf242432a00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155_safeTransferFrom_sig_ptr = 0x0;
uint256 constant ERC1155_safeTransferFrom_from_ptr = 0x04;
uint256 constant ERC1155_safeTransferFrom_to_ptr = 0x24;
uint256 constant ERC1155_safeTransferFrom_id_ptr = 0x44;
uint256 constant ERC1155_safeTransferFrom_amount_ptr = 0x64;
uint256 constant ERC1155_safeTransferFrom_data_offset_ptr = 0x84;
uint256 constant ERC1155_safeTransferFrom_data_length_ptr = 0xa4;
uint256 constant ERC1155_safeTransferFrom_length = 0xc4; // 4 + 32 * 6 == 196
uint256 constant ERC1155_safeTransferFrom_data_length_offset = 0xa0;
// abi.encodeWithSignature(
//     "safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)"
// )
uint256 constant ERC1155_safeBatchTransferFrom_signature = (
    0x2eb2c2d600000000000000000000000000000000000000000000000000000000
);
// bytes4 constant ERC1155_safeBatchTransferFrom_selector = bytes4(
//     bytes32(ERC1155_safeBatchTransferFrom_signature)
// );
uint256 constant ERC721_transferFrom_signature = (
    0x23b872dd00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC721_transferFrom_sig_ptr = 0x0;
uint256 constant ERC721_transferFrom_from_ptr = 0x04;
uint256 constant ERC721_transferFrom_to_ptr = 0x24;
uint256 constant ERC721_transferFrom_id_ptr = 0x44;
uint256 constant ERC721_transferFrom_length = 0x64; // 4 + 32 * 3 == 100
/*
 *  error NoContract(address account)
 *    - Defined in TokenTransferrerErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x00: account
 * Revert buffer is memory[0x1c:0x40]
 */
uint256 constant NoContract_error_selector = 0x5f15d672;
uint256 constant NoContract_error_account_ptr = 0x20;
uint256 constant NoContract_error_length = 0x24;
/*
 *  error TokenTransferGenericFailure(
 *      address token,
 *      address from,
 *      address to,
 *      uint256 identifier,
 *      uint256 amount
 *  )
 *    - Defined in TokenTransferrerErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x20: token
 *    - 0x40: from
 *    - 0x60: to
 *    - 0x80: identifier
 *    - 0xa0: amount
 * Revert buffer is memory[0x1c:0xc0]
 */
uint256 constant TokenTransferGenericFailure_error_selector = 0xf486bc87;
uint256 constant TokenTransferGenericFailure_error_token_ptr = 0x20;
uint256 constant TokenTransferGenericFailure_error_from_ptr = 0x40;
uint256 constant TokenTransferGenericFailure_error_to_ptr = 0x60;
uint256 constant TokenTransferGenericFailure_error_identifier_ptr = 0x80;
uint256 constant TokenTransferGenericFailure_err_identifier_ptr = 0x80;
uint256 constant TokenTransferGenericFailure_error_amount_ptr = 0xa0;
uint256 constant TokenTransferGenericFailure_error_length = 0xa4;
uint256 constant ExtraGasBuffer = 0x20;
uint256 constant CostPerWord = 0x3;
uint256 constant MemoryExpansionCoefficientShift = 0x9;
// Values are offset by 32 bytes in order to write the token to the beginning
// in the event of a revert
uint256 constant BatchTransfer1155Params_ptr = 0x24;
uint256 constant BatchTransfer1155Params_ids_head_ptr = 0x64;
uint256 constant BatchTransfer1155Params_amounts_head_ptr = 0x84;
uint256 constant BatchTransfer1155Params_data_head_ptr = 0xa4;
uint256 constant BatchTransfer1155Params_data_length_basePtr = 0xc4;
uint256 constant BatchTransfer1155Params_calldata_baseSize = 0xc4;
uint256 constant BatchTransfer1155Params_ids_length_ptr = 0xc4;
uint256 constant BatchTransfer1155Params_ids_length_offset = 0xa0;
// uint256 constant BatchTransfer1155Params_amounts_length_baseOffset = 0xc0;
// uint256 constant BatchTransfer1155Params_data_length_baseOffset = 0xe0;
uint256 constant ConduitBatch1155Transfer_usable_head_size = 0x80;
uint256 constant ConduitBatch1155Transfer_from_offset = 0x20;
uint256 constant ConduitBatch1155Transfer_ids_head_offset = 0x60;
// uint256 constant ConduitBatch1155Transfer_amounts_head_offset = 0x80;
uint256 constant ConduitBatch1155Transfer_ids_length_offset = 0xa0;
uint256 constant ConduitBatch1155Transfer_amounts_length_baseOffset = 0xc0;
// uint256 constant ConduitBatch1155Transfer_calldata_baseSize = 0xc0;
// Note: abbreviated version of above constant to adhere to line length limit.
uint256 constant ConduitBatchTransfer_amounts_head_offset = 0x80;
uint256 constant Invalid1155BatchTransferEncoding_ptr = 0x00;
uint256 constant Invalid1155BatchTransferEncoding_length = 0x04;
uint256 constant Invalid1155BatchTransferEncoding_selector = (
    0xeba2084c00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155BatchTransferGenericFailure_error_signature = (
    0xafc445e200000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155BatchTransferGenericFailure_token_ptr = 0x04;
uint256 constant ERC1155BatchTransferGenericFailure_ids_offset = 0xc0;
/*
 *  error BadReturnValueFromERC20OnTransfer(
 *      address token, address from, address to, uint256 amount
 *  )
 *    - Defined in TokenTransferrerErrors.sol
 *  Memory layout:
 *    - 0x00: Left-padded selector (data begins at 0x1c)
 *    - 0x00: token
 *    - 0x20: from
 *    - 0x40: to
 *    - 0x60: amount
 * Revert buffer is memory[0x1c:0xa0]
 */
uint256 constant BadReturnValueFromERC20OnTransfer_error_selector = 0x98891923;
uint256 constant BadReturnValueFromERC20OnTransfer_error_token_ptr = 0x20;
uint256 constant BadReturnValueFromERC20OnTransfer_error_from_ptr = 0x40;
uint256 constant BadReturnValueFromERC20OnTransfer_error_to_ptr = 0x60;
uint256 constant BadReturnValueFromERC20OnTransfer_error_amount_ptr = 0x80;
uint256 constant BadReturnValueFromERC20OnTransfer_error_length = 0x84;
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/**
 * @title TokenTransferrerErrors
 */
interface TokenTransferrerErrors {
    /**
     * @dev Revert with an error when an ERC721 transfer with amount other than
     *      one is attempted.
     *
     * @param amount The amount of the ERC721 tokens to transfer.
     */
    error InvalidERC721TransferAmount(uint256 amount);
    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has an amount of zero.
     */
    error MissingItemAmount();
    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has unused parameters. This includes both the token and the
     *      identifier parameters for native transfers as well as the identifier
     *      parameter for ERC20 transfers. Note that the conduit does not
     *      perform this check, leaving it up to the calling channel to enforce
     *      when desired.
     */
    error UnusedItemParameters();
    /**
     * @dev Revert with an error when an ERC20, ERC721, or ERC1155 token
     *      transfer reverts.
     *
     * @param token      The token for which the transfer was attempted.
     * @param from       The source of the attempted transfer.
     * @param to         The recipient of the attempted transfer.
     * @param identifier The identifier for the attempted transfer.
     * @param amount     The amount for the attempted transfer.
     */
    error TokenTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    );
    /**
     * @dev Revert with an error when a batch ERC1155 token transfer reverts.
     *
     * @param token       The token for which the transfer was attempted.
     * @param from        The source of the attempted transfer.
     * @param to          The recipient of the attempted transfer.
     * @param identifiers The identifiers for the attempted transfer.
     * @param amounts     The amounts for the attempted transfer.
     */
    error ERC1155BatchTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256[] identifiers,
        uint256[] amounts
    );
    /**
     * @dev Revert with an error when an ERC20 token transfer returns a falsey
     *      value.
     *
     * @param token      The token for which the ERC20 transfer was attempted.
     * @param from       The source of the attempted ERC20 transfer.
     * @param to         The recipient of the attempted ERC20 transfer.
     * @param amount     The amount for the attempted ERC20 transfer.
     */
    error BadReturnValueFromERC20OnTransfer(
        address token,
        address from,
        address to,
        uint256 amount
    );
    /**
     * @dev Revert with an error when an account being called as an assumed
     *      contract does not have code and returns no data.
     *
     * @param account The account that should contain code.
     */
    error NoContract(address account);
    /**
     * @dev Revert with an error when attempting to execute an 1155 batch
     *      transfer using calldata not produced by default ABI encoding or with
     *      different lengths for ids and amounts arrays.
     */
    error Invalid1155BatchTransferEncoding();
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    OrderParameters
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import { ConsiderationBase } from "./ConsiderationBase.sol";
import {
    Create2AddressDerivation_length,
    Create2AddressDerivation_ptr,
    EIP_712_PREFIX,
    EIP712_ConsiderationItem_size,
    EIP712_DigestPayload_size,
    EIP712_DomainSeparator_offset,
    EIP712_OfferItem_size,
    EIP712_Order_size,
    EIP712_OrderHash_offset,
    FreeMemoryPointerSlot,
    information_conduitController_offset,
    information_domainSeparator_offset,
    information_length,
    information_version_cd_offset,
    information_version_offset,
    information_versionLengthPtr,
    information_versionWithLength,
    MaskOverByteTwelve,
    MaskOverLastTwentyBytes,
    OneWord,
    OneWordShift,
    OrderParameters_consideration_head_offset,
    OrderParameters_counter_offset,
    OrderParameters_offer_head_offset,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
/**
 * @title GettersAndDerivers
 * @author 0age
 * @notice ConsiderationInternal contains pure and internal view functions
 *         related to getting or deriving various values.
 */
contract GettersAndDerivers is ConsiderationBase {
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(
        address conduitController
    ) ConsiderationBase(conduitController) {}
    /**
     * @dev Internal view function to derive the order hash for a given order.
     *      Note that only the original consideration items are included in the
     *      order hash, as additional consideration items may be supplied by the
     *      caller.
     *
     * @param orderParameters The parameters of the order to hash.
     * @param counter         The counter of the order to hash.
     *
     * @return orderHash The hash.
     */
    function _deriveOrderHash(
        OrderParameters memory orderParameters,
        uint256 counter
    ) internal view returns (bytes32 orderHash) {
        // Get length of original consideration array and place it on the stack.
        uint256 originalConsiderationLength = (
            orderParameters.totalOriginalConsiderationItems
        );
        /*
         * Memory layout for an array of structs (dynamic or not) is similar
         * to ABI encoding of dynamic types, with a head segment followed by
         * a data segment. The main difference is that the head of an element
         * is a memory pointer rather than an offset.
         */
        // Declare a variable for the derived hash of the offer array.
        bytes32 offerHash;
        // Read offer item EIP-712 typehash from runtime code & place on stack.
        bytes32 typeHash = _OFFER_ITEM_TYPEHASH;
        // Utilize assembly so that memory regions can be reused across hashes.
        assembly {
            // Retrieve the free memory pointer and place on the stack.
            let hashArrPtr := mload(FreeMemoryPointerSlot)
            // Get the pointer to the offers array.
            let offerArrPtr := mload(
                add(orderParameters, OrderParameters_offer_head_offset)
            )
            // Load the length.
            let offerLength := mload(offerArrPtr)
            // Set the pointer to the first offer's head.
            offerArrPtr := add(offerArrPtr, OneWord)
            // Iterate over the offer items.
            for {
                let i := 0
            } lt(i, offerLength) {
                i := add(i, 1)
            } {
                // Read the pointer to the offer data and subtract one word
                // to get typeHash pointer.
                let ptr := sub(mload(offerArrPtr), OneWord)
                // Read the current value before the offer data.
                let value := mload(ptr)
                // Write the type hash to the previous word.
                mstore(ptr, typeHash)
                // Take the EIP712 hash and store it in the hash array.
                mstore(hashArrPtr, keccak256(ptr, EIP712_OfferItem_size))
                // Restore the previous word.
                mstore(ptr, value)
                // Increment the array pointers by one word.
                offerArrPtr := add(offerArrPtr, OneWord)
                hashArrPtr := add(hashArrPtr, OneWord)
            }
            // Derive the offer hash using the hashes of each item.
            offerHash := keccak256(
                mload(FreeMemoryPointerSlot),
                shl(OneWordShift, offerLength)
            )
        }
        // Declare a variable for the derived hash of the consideration array.
        bytes32 considerationHash;
        // Read consideration item typehash from runtime code & place on stack.
        typeHash = _CONSIDERATION_ITEM_TYPEHASH;
        // Utilize assembly so that memory regions can be reused across hashes.
        assembly {
            // Retrieve the free memory pointer and place on the stack.
            let hashArrPtr := mload(FreeMemoryPointerSlot)
            // Get the pointer to the consideration array.
            let considerationArrPtr := add(
                mload(
                    add(
                        orderParameters,
                        OrderParameters_consideration_head_offset
                    )
                ),
                OneWord
            )
            // Iterate over the consideration items (not including tips).
            for {
                let i := 0
            } lt(i, originalConsiderationLength) {
                i := add(i, 1)
            } {
                // Read the pointer to the consideration data and subtract one
                // word to get typeHash pointer.
                let ptr := sub(mload(considerationArrPtr), OneWord)
                // Read the current value before the consideration data.
                let value := mload(ptr)
                // Write the type hash to the previous word.
                mstore(ptr, typeHash)
                // Take the EIP712 hash and store it in the hash array.
                mstore(
                    hashArrPtr,
                    keccak256(ptr, EIP712_ConsiderationItem_size)
                )
                // Restore the previous word.
                mstore(ptr, value)
                // Increment the array pointers by one word.
                considerationArrPtr := add(considerationArrPtr, OneWord)
                hashArrPtr := add(hashArrPtr, OneWord)
            }
            // Derive the consideration hash using the hashes of each item.
            considerationHash := keccak256(
                mload(FreeMemoryPointerSlot),
                shl(OneWordShift, originalConsiderationLength)
            )
        }
        // Read order item EIP-712 typehash from runtime code & place on stack.
        typeHash = _ORDER_TYPEHASH;
        // Utilize assembly to access derived hashes & other arguments directly.
        assembly {
            // Retrieve pointer to the region located just behind parameters.
            let typeHashPtr := sub(orderParameters, OneWord)
            // Store the value at that pointer location to restore later.
            let previousValue := mload(typeHashPtr)
            // Store the order item EIP-712 typehash at the typehash location.
            mstore(typeHashPtr, typeHash)
            // Retrieve the pointer for the offer array head.
            let offerHeadPtr := add(
                orderParameters,
                OrderParameters_offer_head_offset
            )
            // Retrieve the data pointer referenced by the offer head.
            let offerDataPtr := mload(offerHeadPtr)
            // Store the offer hash at the retrieved memory location.
            mstore(offerHeadPtr, offerHash)
            // Retrieve the pointer for the consideration array head.
            let considerationHeadPtr := add(
                orderParameters,
                OrderParameters_consideration_head_offset
            )
            // Retrieve the data pointer referenced by the consideration head.
            let considerationDataPtr := mload(considerationHeadPtr)
            // Store the consideration hash at the retrieved memory location.
            mstore(considerationHeadPtr, considerationHash)
            // Retrieve the pointer for the counter.
            let counterPtr := add(
                orderParameters,
                OrderParameters_counter_offset
            )
            // Store the counter at the retrieved memory location.
            mstore(counterPtr, counter)
            // Derive the order hash using the full range of order parameters.
            orderHash := keccak256(typeHashPtr, EIP712_Order_size)
            // Restore the value previously held at typehash pointer location.
            mstore(typeHashPtr, previousValue)
            // Restore offer data pointer at the offer head pointer location.
            mstore(offerHeadPtr, offerDataPtr)
            // Restore consideration data pointer at the consideration head ptr.
            mstore(considerationHeadPtr, considerationDataPtr)
            // Restore consideration item length at the counter pointer.
            mstore(counterPtr, originalConsiderationLength)
        }
    }
    /**
     * @dev Internal view function to derive the address of a given conduit
     *      using a corresponding conduit key.
     *
     * @param conduitKey A bytes32 value indicating what corresponding conduit,
     *                   if any, to source token approvals from. This value is
     *                   the "salt" parameter supplied by the deployer (i.e. the
     *                   conduit controller) when deploying the given conduit.
     *
     * @return conduit The address of the conduit associated with the given
     *                 conduit key.
     */
    function _deriveConduit(
        bytes32 conduitKey
    ) internal view returns (address conduit) {
        // Read conduit controller address from runtime and place on the stack.
        address conduitController = address(_CONDUIT_CONTROLLER);
        // Read conduit creation code hash from runtime and place on the stack.
        bytes32 conduitCreationCodeHash = _CONDUIT_CREATION_CODE_HASH;
        // Leverage scratch space to perform an efficient hash.
        assembly {
            // Retrieve the free memory pointer; it will be replaced afterwards.
            let freeMemoryPointer := mload(FreeMemoryPointerSlot)
            // Place the control character and the conduit controller in scratch
            // space; note that eleven bytes at the beginning are left unused.
            mstore(0, or(MaskOverByteTwelve, conduitController))
            // Place the conduit key in the next region of scratch space.
            mstore(OneWord, conduitKey)
            // Place conduit creation code hash in free memory pointer location.
            mstore(TwoWords, conduitCreationCodeHash)
            // Derive conduit by hashing and applying a mask over last 20 bytes.
            conduit := and(
                // Hash the relevant region.
                keccak256(
                    // The region starts at memory pointer 11.
                    Create2AddressDerivation_ptr,
                    // The region is 85 bytes long (1 + 20 + 32 + 32).
                    Create2AddressDerivation_length
                ),
                // The address equals the last twenty bytes of the hash.
                MaskOverLastTwentyBytes
            )
            // Restore the free memory pointer.
            mstore(FreeMemoryPointerSlot, freeMemoryPointer)
        }
    }
    /**
     * @dev Internal view function to get the EIP-712 domain separator. If the
     *      chainId matches the chainId set on deployment, the cached domain
     *      separator will be returned; otherwise, it will be derived from
     *      scratch.
     *
     * @return The domain separator.
     */
    function _domainSeparator() internal view returns (bytes32) {
        return
            block.chainid == _CHAIN_ID
                ? _DOMAIN_SEPARATOR
                : _deriveDomainSeparator();
    }
    /**
     * @dev Internal view function to retrieve configuration information for
     *      this contract.
     *
     * @return The contract version.
     * @return The domain separator for this contract.
     * @return The conduit Controller set for this contract.
     */
    function _information()
        internal
        view
        returns (
            string memory /* version */,
            bytes32 /* domainSeparator */,
            address /* conduitController */
        )
    {
        // Derive the domain separator.
        bytes32 domainSeparator = _domainSeparator();
        // Declare variable as immutables cannot be accessed within assembly.
        address conduitController = address(_CONDUIT_CONTROLLER);
        // Return the version, domain separator, and conduit controller.
        assembly {
            mstore(information_version_offset, information_version_cd_offset)
            mstore(information_domainSeparator_offset, domainSeparator)
            mstore(information_conduitController_offset, conduitController)
            mstore(information_versionLengthPtr, information_versionWithLength)
            return(information_version_offset, information_length)
        }
    }
    /**
     * @dev Internal pure function to efficiently derive an digest to sign for
     *      an order in accordance with EIP-712.
     *
     * @param domainSeparator The domain separator.
     * @param orderHash       The order hash.
     *
     * @return value The hash.
     */
    function _deriveEIP712Digest(
        bytes32 domainSeparator,
        bytes32 orderHash
    ) internal pure returns (bytes32 value) {
        // Leverage scratch space to perform an efficient hash.
        assembly {
            // Place the EIP-712 prefix at the start of scratch space.
            mstore(0, EIP_712_PREFIX)
            // Place the domain separator in the next region of scratch space.
            mstore(EIP712_DomainSeparator_offset, domainSeparator)
            // Place the order hash in scratch space, spilling into the first
            // two bytes of the free memory pointer — this should never be set
            // as memory cannot be expanded to that size, and will be zeroed out
            // after the hash is performed.
            mstore(EIP712_OrderHash_offset, orderHash)
            // Hash the relevant region (65 bytes).
            value := keccak256(0, EIP712_DigestPayload_size)
            // Clear out the dirtied bits in the memory pointer.
            mstore(EIP712_OrderHash_offset, 0)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ConsiderationEventsAndErrors
} from "seaport-types/src/interfaces/ConsiderationEventsAndErrors.sol";
import { ReentrancyGuard } from "./ReentrancyGuard.sol";
import {
    Counter_blockhash_shift,
    OneWord,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
/**
 * @title CounterManager
 * @author 0age
 * @notice CounterManager contains a storage mapping and related functionality
 *         for retrieving and incrementing a per-offerer counter.
 */
contract CounterManager is ConsiderationEventsAndErrors, ReentrancyGuard {
    // Only orders signed using an offerer's current counter are fulfillable.
    mapping(address => uint256) private _counters;
    /**
     * @dev Internal function to cancel all orders from a given offerer in bulk
     *      by incrementing a counter by a large, quasi-random interval. Note
     *      that only the offerer may increment the counter. Note that the
     *      counter is incremented by a large, quasi-random interval, which
     *      makes it infeasible to "activate" signed orders by incrementing the
     *      counter.  This activation functionality can be achieved instead with
     *      restricted orders or contract orders.
     *
     * @return newCounter The new counter.
     */
    function _incrementCounter() internal returns (uint256 newCounter) {
        // Ensure that the reentrancy guard is not currently set.
        _assertNonReentrant();
        // Utilize assembly to access counters storage mapping directly. Skip
        // overflow check as counter cannot be incremented that far.
        assembly {
            // Use second half of previous block hash as a quasi-random number.
            let quasiRandomNumber := shr(
                Counter_blockhash_shift,
                blockhash(sub(number(), 1))
            )
            // Write the caller to scratch space.
            mstore(0, caller())
            // Write the storage slot for _counters to scratch space.
            mstore(OneWord, _counters.slot)
            // Derive the storage pointer for the counter value.
            let storagePointer := keccak256(0, TwoWords)
            // Derive new counter value using random number and original value.
            newCounter := add(quasiRandomNumber, sload(storagePointer))
            // Store the updated counter value.
            sstore(storagePointer, newCounter)
        }
        // Emit an event containing the new counter.
        emit CounterIncremented(newCounter, msg.sender);
    }
    /**
     * @dev Internal view function to retrieve the current counter for a given
     *      offerer.
     *
     * @param offerer The offerer in question.
     *
     * @return currentCounter The current counter.
     */
    function _getCounter(
        address offerer
    ) internal view returns (uint256 currentCounter) {
        // Return the counter for the supplied offerer.
        currentCounter = _counters[offerer];
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/**
 * @title SignatureVerificationErrors
 * @author 0age
 * @notice SignatureVerificationErrors contains all errors related to signature
 *         verification.
 */
interface SignatureVerificationErrors {
    /**
     * @dev Revert with an error when a signature that does not contain a v
     *      value of 27 or 28 has been supplied.
     *
     * @param v The invalid v value.
     */
    error BadSignatureV(uint8 v);
    /**
     * @dev Revert with an error when the signer recovered by the supplied
     *      signature does not match the offerer or an allowed EIP-1271 signer
     *      as specified by the offerer in the event they are a contract.
     */
    error InvalidSigner();
    /**
     * @dev Revert with an error when a signer cannot be recovered from the
     *      supplied signature.
     */
    error InvalidSignature();
    /**
     * @dev Revert with an error when an EIP-1271 call to an account fails.
     */
    error BadContractSignature();
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ConduitControllerInterface
} from "seaport-types/src/interfaces/ConduitControllerInterface.sol";
import {
    ConsiderationEventsAndErrors
} from "seaport-types/src/interfaces/ConsiderationEventsAndErrors.sol";
import {
    BulkOrder_Typehash_Height_One,
    BulkOrder_Typehash_Height_Two,
    BulkOrder_Typehash_Height_Three,
    BulkOrder_Typehash_Height_Four,
    BulkOrder_Typehash_Height_Five,
    BulkOrder_Typehash_Height_Six,
    BulkOrder_Typehash_Height_Seven,
    BulkOrder_Typehash_Height_Eight,
    BulkOrder_Typehash_Height_Nine,
    BulkOrder_Typehash_Height_Ten,
    BulkOrder_Typehash_Height_Eleven,
    BulkOrder_Typehash_Height_Twelve,
    BulkOrder_Typehash_Height_Thirteen,
    BulkOrder_Typehash_Height_Fourteen,
    BulkOrder_Typehash_Height_Fifteen,
    BulkOrder_Typehash_Height_Sixteen,
    BulkOrder_Typehash_Height_Seventeen,
    BulkOrder_Typehash_Height_Eighteen,
    BulkOrder_Typehash_Height_Nineteen,
    BulkOrder_Typehash_Height_Twenty,
    BulkOrder_Typehash_Height_TwentyOne,
    BulkOrder_Typehash_Height_TwentyTwo,
    BulkOrder_Typehash_Height_TwentyThree,
    BulkOrder_Typehash_Height_TwentyFour,
    EIP712_domainData_chainId_offset,
    EIP712_domainData_nameHash_offset,
    EIP712_domainData_size,
    EIP712_domainData_verifyingContract_offset,
    EIP712_domainData_versionHash_offset,
    FreeMemoryPointerSlot,
    NameLengthPtr,
    NameWithLength,
    OneWord,
    Slot0x80,
    ThreeWords,
    ZeroSlot
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import { ConsiderationDecoder } from "./ConsiderationDecoder.sol";
import { ConsiderationEncoder } from "./ConsiderationEncoder.sol";
/**
 * @title ConsiderationBase
 * @author 0age
 * @notice ConsiderationBase contains immutable constants and constructor logic.
 */
contract ConsiderationBase is
    ConsiderationDecoder,
    ConsiderationEncoder,
    ConsiderationEventsAndErrors
{
    // Precompute hashes, original chainId, and domain separator on deployment.
    bytes32 internal immutable _NAME_HASH;
    bytes32 internal immutable _VERSION_HASH;
    bytes32 internal immutable _EIP_712_DOMAIN_TYPEHASH;
    bytes32 internal immutable _OFFER_ITEM_TYPEHASH;
    bytes32 internal immutable _CONSIDERATION_ITEM_TYPEHASH;
    bytes32 internal immutable _ORDER_TYPEHASH;
    uint256 internal immutable _CHAIN_ID;
    bytes32 internal immutable _DOMAIN_SEPARATOR;
    // Allow for interaction with the conduit controller.
    ConduitControllerInterface internal immutable _CONDUIT_CONTROLLER;
    // Cache the conduit creation code hash used by the conduit controller.
    bytes32 internal immutable _CONDUIT_CREATION_CODE_HASH;
    /**
     * @dev Derive and set hashes, reference chainId, and associated domain
     *      separator during deployment.
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) {
        // Derive name and version hashes alongside required EIP-712 typehashes.
        (
            _NAME_HASH,
            _VERSION_HASH,
            _EIP_712_DOMAIN_TYPEHASH,
            _OFFER_ITEM_TYPEHASH,
            _CONSIDERATION_ITEM_TYPEHASH,
            _ORDER_TYPEHASH
        ) = _deriveTypehashes();
        // Store the current chainId and derive the current domain separator.
        _CHAIN_ID = block.chainid;
        _DOMAIN_SEPARATOR = _deriveDomainSeparator();
        // Set the supplied conduit controller.
        _CONDUIT_CONTROLLER = ConduitControllerInterface(conduitController);
        // Retrieve the conduit creation code hash from the supplied controller.
        (_CONDUIT_CREATION_CODE_HASH, ) = (
            _CONDUIT_CONTROLLER.getConduitCodeHashes()
        );
    }
    /**
     * @dev Internal view function to derive the EIP-712 domain separator.
     *
     * @return domainSeparator The derived domain separator.
     */
    function _deriveDomainSeparator()
        internal
        view
        returns (bytes32 domainSeparator)
    {
        bytes32 typehash = _EIP_712_DOMAIN_TYPEHASH;
        bytes32 nameHash = _NAME_HASH;
        bytes32 versionHash = _VERSION_HASH;
        // Leverage scratch space and other memory to perform an efficient hash.
        assembly {
            // Retrieve the free memory pointer; it will be replaced afterwards.
            let freeMemoryPointer := mload(FreeMemoryPointerSlot)
            // Retrieve value at 0x80; it will also be replaced afterwards.
            let slot0x80 := mload(Slot0x80)
            // Place typehash, name hash, and version hash at start of memory.
            mstore(0, typehash)
            mstore(EIP712_domainData_nameHash_offset, nameHash)
            mstore(EIP712_domainData_versionHash_offset, versionHash)
            // Place chainId in the next memory location.
            mstore(EIP712_domainData_chainId_offset, chainid())
            // Place the address of this contract in the next memory location.
            mstore(EIP712_domainData_verifyingContract_offset, address())
            // Hash relevant region of memory to derive the domain separator.
            domainSeparator := keccak256(0, EIP712_domainData_size)
            // Restore the free memory pointer.
            mstore(FreeMemoryPointerSlot, freeMemoryPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
            // Restore the value at 0x80.
            mstore(Slot0x80, slot0x80)
        }
    }
    /**
     * @dev Internal pure function to retrieve the default name of this
     *      contract and return.
     *
     * @return The name of this contract.
     */
    function _name() internal pure virtual returns (string memory) {
        // Return the name of the contract.
        assembly {
            // First element is the offset for the returned string. Offset the
            // value in memory by one word so that the free memory pointer will
            // be overwritten by the next write.
            mstore(OneWord, OneWord)
            // Name is right padded, so it touches the length which is left
            // padded. This enables writing both values at once. The free memory
            // pointer will be overwritten in the process.
            mstore(NameLengthPtr, NameWithLength)
            // Standard ABI encoding pads returned data to the nearest word. Use
            // the already empty zero slot memory region for this purpose and
            // return the final name string, offset by the original single word.
            return(OneWord, ThreeWords)
        }
    }
    /**
     * @dev Internal pure function to retrieve the default name of this contract
     *      as a string that can be used internally.
     *
     * @return The name of this contract.
     */
    function _nameString() internal pure virtual returns (string memory) {
        // Return the name of the contract.
        return "Consideration";
    }
    /**
     * @dev Internal pure function to derive required EIP-712 typehashes and
     *      other hashes during contract creation.
     *
     * @return nameHash                  The hash of the name of the contract.
     * @return versionHash               The hash of the version string of the
     *                                   contract.
     * @return eip712DomainTypehash      The primary EIP-712 domain typehash.
     * @return offerItemTypehash         The EIP-712 typehash for OfferItem
     *                                   types.
     * @return considerationItemTypehash The EIP-712 typehash for
     *                                   ConsiderationItem types.
     * @return orderTypehash             The EIP-712 typehash for Order types.
     */
    function _deriveTypehashes()
        internal
        pure
        returns (
            bytes32 nameHash,
            bytes32 versionHash,
            bytes32 eip712DomainTypehash,
            bytes32 offerItemTypehash,
            bytes32 considerationItemTypehash,
            bytes32 orderTypehash
        )
    {
        // Derive hash of the name of the contract.
        nameHash = keccak256(bytes(_nameString()));
        // Derive hash of the version string of the contract.
        versionHash = keccak256(bytes("1.6"));
        // Construct the OfferItem type string.
        bytes memory offerItemTypeString = bytes(
            "OfferItem("
            "uint8 itemType,"
            "address token,"
            "uint256 identifierOrCriteria,"
            "uint256 startAmount,"
            "uint256 endAmount"
            ")"
        );
        // Construct the ConsiderationItem type string.
        bytes memory considerationItemTypeString = bytes(
            "ConsiderationItem("
            "uint8 itemType,"
            "address token,"
            "uint256 identifierOrCriteria,"
            "uint256 startAmount,"
            "uint256 endAmount,"
            "address recipient"
            ")"
        );
        // Construct the OrderComponents type string, not including the above.
        bytes memory orderComponentsPartialTypeString = bytes(
            "OrderComponents("
            "address offerer,"
            "address zone,"
            "OfferItem[] offer,"
            "ConsiderationItem[] consideration,"
            "uint8 orderType,"
            "uint256 startTime,"
            "uint256 endTime,"
            "bytes32 zoneHash,"
            "uint256 salt,"
            "bytes32 conduitKey,"
            "uint256 counter"
            ")"
        );
        // Construct the primary EIP-712 domain type string.
        eip712DomainTypehash = keccak256(
            bytes(
                "EIP712Domain("
                "string name,"
                "string version,"
                "uint256 chainId,"
                "address verifyingContract"
                ")"
            )
        );
        // Derive the OfferItem type hash using the corresponding type string.
        offerItemTypehash = keccak256(offerItemTypeString);
        // Derive ConsiderationItem type hash using corresponding type string.
        considerationItemTypehash = keccak256(considerationItemTypeString);
        bytes memory orderTypeString = bytes.concat(
            orderComponentsPartialTypeString,
            considerationItemTypeString,
            offerItemTypeString
        );
        // Derive OrderItem type hash via combination of relevant type strings.
        orderTypehash = keccak256(orderTypeString);
    }
    /**
     * @dev Internal pure function to look up one of twenty-four potential bulk
     *      order typehash constants based on the height of the bulk order tree.
     *      Note that values between one and twenty-four are supported, which is
     *      enforced by _isValidBulkOrderSize.
     *
     * @param _treeHeight The height of the bulk order tree. The value must be
     *                    between one and twenty-four.
     *
     * @return _typeHash The EIP-712 typehash for the bulk order type with the
     *                   given height.
     */
    function _lookupBulkOrderTypehash(
        uint256 _treeHeight
    ) internal pure returns (bytes32 _typeHash) {
        // Utilize assembly to efficiently retrieve correct bulk order typehash.
        assembly {
            // Use a Yul function to enable use of the `leave` keyword
            // to stop searching once the appropriate type hash is found.
            function lookupTypeHash(treeHeight) -> typeHash {
                // Handle tree heights one through eight.
                if lt(treeHeight, 9) {
                    // Handle tree heights one through four.
                    if lt(treeHeight, 5) {
                        // Handle tree heights one and two.
                        if lt(treeHeight, 3) {
                            // Utilize branchless logic to determine typehash.
                            typeHash := ternary(
                                eq(treeHeight, 1),
                                BulkOrder_Typehash_Height_One,
                                BulkOrder_Typehash_Height_Two
                            )
                            // Exit the function once typehash has been located.
                            leave
                        }
                        // Handle height three and four via branchless logic.
                        typeHash := ternary(
                            eq(treeHeight, 3),
                            BulkOrder_Typehash_Height_Three,
                            BulkOrder_Typehash_Height_Four
                        )
                        // Exit the function once typehash has been located.
                        leave
                    }
                    // Handle tree height five and six.
                    if lt(treeHeight, 7) {
                        // Utilize branchless logic to determine typehash.
                        typeHash := ternary(
                            eq(treeHeight, 5),
                            BulkOrder_Typehash_Height_Five,
                            BulkOrder_Typehash_Height_Six
                        )
                        // Exit the function once typehash has been located.
                        leave
                    }
                    // Handle height seven and eight via branchless logic.
                    typeHash := ternary(
                        eq(treeHeight, 7),
                        BulkOrder_Typehash_Height_Seven,
                        BulkOrder_Typehash_Height_Eight
                    )
                    // Exit the function once typehash has been located.
                    leave
                }
                // Handle tree height nine through sixteen.
                if lt(treeHeight, 17) {
                    // Handle tree height nine through twelve.
                    if lt(treeHeight, 13) {
                        // Handle tree height nine and ten.
                        if lt(treeHeight, 11) {
                            // Utilize branchless logic to determine typehash.
                            typeHash := ternary(
                                eq(treeHeight, 9),
                                BulkOrder_Typehash_Height_Nine,
                                BulkOrder_Typehash_Height_Ten
                            )
                            // Exit the function once typehash has been located.
                            leave
                        }
                        // Handle height eleven and twelve via branchless logic.
                        typeHash := ternary(
                            eq(treeHeight, 11),
                            BulkOrder_Typehash_Height_Eleven,
                            BulkOrder_Typehash_Height_Twelve
                        )
                        // Exit the function once typehash has been located.
                        leave
                    }
                    // Handle tree height thirteen and fourteen.
                    if lt(treeHeight, 15) {
                        // Utilize branchless logic to determine typehash.
                        typeHash := ternary(
                            eq(treeHeight, 13),
                            BulkOrder_Typehash_Height_Thirteen,
                            BulkOrder_Typehash_Height_Fourteen
                        )
                        // Exit the function once typehash has been located.
                        leave
                    }
                    // Handle height fifteen and sixteen via branchless logic.
                    typeHash := ternary(
                        eq(treeHeight, 15),
                        BulkOrder_Typehash_Height_Fifteen,
                        BulkOrder_Typehash_Height_Sixteen
                    )
                    // Exit the function once typehash has been located.
                    leave
                }
                // Handle tree height seventeen through twenty.
                if lt(treeHeight, 21) {
                    // Handle tree height seventeen and eighteen.
                    if lt(treeHeight, 19) {
                        // Utilize branchless logic to determine typehash.
                        typeHash := ternary(
                            eq(treeHeight, 17),
                            BulkOrder_Typehash_Height_Seventeen,
                            BulkOrder_Typehash_Height_Eighteen
                        )
                        // Exit the function once typehash has been located.
                        leave
                    }
                    // Handle height nineteen and twenty via branchless logic.
                    typeHash := ternary(
                        eq(treeHeight, 19),
                        BulkOrder_Typehash_Height_Nineteen,
                        BulkOrder_Typehash_Height_Twenty
                    )
                    // Exit the function once typehash has been located.
                    leave
                }
                // Handle tree height twenty-one and twenty-two.
                if lt(treeHeight, 23) {
                    // Utilize branchless logic to determine typehash.
                    typeHash := ternary(
                        eq(treeHeight, 21),
                        BulkOrder_Typehash_Height_TwentyOne,
                        BulkOrder_Typehash_Height_TwentyTwo
                    )
                    // Exit the function once typehash has been located.
                    leave
                }
                // Handle height twenty-three & twenty-four w/ branchless logic.
                typeHash := ternary(
                    eq(treeHeight, 23),
                    BulkOrder_Typehash_Height_TwentyThree,
                    BulkOrder_Typehash_Height_TwentyFour
                )
                // Exit the function once typehash has been located.
                leave
            }
            // Implement ternary conditional using branchless logic.
            function ternary(cond, ifTrue, ifFalse) -> c {
                c := xor(ifFalse, mul(cond, xor(ifFalse, ifTrue)))
            }
            // Look up the typehash using the supplied tree height.
            _typeHash := lookupTypeHash(_treeHeight)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {
    OrderParameters,
    ReceivedItem,
    SpentItem
} from "../lib/ConsiderationStructs.sol";
/**
 * @title ConsiderationEventsAndErrors
 * @author 0age
 * @notice ConsiderationEventsAndErrors contains all events and errors.
 */
interface ConsiderationEventsAndErrors {
    /**
     * @dev Emit an event whenever an order is successfully fulfilled.
     *
     * @param orderHash     The hash of the fulfilled order.
     * @param offerer       The offerer of the fulfilled order.
     * @param zone          The zone of the fulfilled order.
     * @param recipient     The recipient of each spent item on the fulfilled
     *                      order, or the null address if there is no specific
     *                      fulfiller (i.e. the order is part of a group of
     *                      orders). Defaults to the caller unless explicitly
     *                      specified otherwise by the fulfiller.
     * @param offer         The offer items spent as part of the order.
     * @param consideration The consideration items received as part of the
     *                      order along with the recipients of each item.
     */
    event OrderFulfilled(
        bytes32 orderHash,
        address indexed offerer,
        address indexed zone,
        address recipient,
        SpentItem[] offer,
        ReceivedItem[] consideration
    );
    /**
     * @dev Emit an event whenever an order is successfully cancelled.
     *
     * @param orderHash The hash of the cancelled order.
     * @param offerer   The offerer of the cancelled order.
     * @param zone      The zone of the cancelled order.
     */
    event OrderCancelled(
        bytes32 orderHash,
        address indexed offerer,
        address indexed zone
    );
    /**
     * @dev Emit an event whenever an order is explicitly validated. Note that
     *      this event will not be emitted on partial fills even though they do
     *      validate the order as part of partial fulfillment.
     *
     * @param orderHash        The hash of the validated order.
     * @param orderParameters  The parameters of the validated order.
     */
    event OrderValidated(bytes32 orderHash, OrderParameters orderParameters);
    /**
     * @dev Emit an event whenever one or more orders are matched using either
     *      matchOrders or matchAdvancedOrders.
     *
     * @param orderHashes The order hashes of the matched orders.
     */
    event OrdersMatched(bytes32[] orderHashes);
    /**
     * @dev Emit an event whenever a counter for a given offerer is incremented.
     *
     * @param newCounter The new counter for the offerer.
     * @param offerer    The offerer in question.
     */
    event CounterIncremented(uint256 newCounter, address indexed offerer);
    /**
     * @dev Revert with an error when attempting to fill an order that has
     *      already been fully filled.
     *
     * @param orderHash The order hash on which a fill was attempted.
     */
    error OrderAlreadyFilled(bytes32 orderHash);
    /**
     * @dev Revert with an error when attempting to fill an order outside the
     *      specified start time and end time.
     *
     * @param startTime The time at which the order becomes active.
     * @param endTime   The time at which the order becomes inactive.
     */
    error InvalidTime(uint256 startTime, uint256 endTime);
    /**
     * @dev Revert with an error when attempting to fill an order referencing an
     *      invalid conduit (i.e. one that has not been deployed).
     */
    error InvalidConduit(bytes32 conduitKey, address conduit);
    /**
     * @dev Revert with an error when an order is supplied for fulfillment with
     *      a consideration array that is shorter than the original array.
     */
    error MissingOriginalConsiderationItems();
    /**
     * @dev Revert with an error when an order is validated and the length of
     *      the consideration array is not equal to the supplied total original
     *      consideration items value. This error is also thrown when contract
     *      orders supply a total original consideration items value that does
     *      not match the supplied consideration array length.
     */
    error ConsiderationLengthNotEqualToTotalOriginal();
    /**
     * @dev Revert with an error when a call to a conduit fails with revert data
     *      that is too expensive to return.
     */
    error InvalidCallToConduit(address conduit);
    /**
     * @dev Revert with an error if a consideration amount has not been fully
     *      zeroed out after applying all fulfillments.
     *
     * @param orderIndex         The index of the order with the consideration
     *                           item with a shortfall.
     * @param considerationIndex The index of the consideration item on the
     *                           order.
     * @param shortfallAmount    The unfulfilled consideration amount.
     */
    error ConsiderationNotMet(
        uint256 orderIndex,
        uint256 considerationIndex,
        uint256 shortfallAmount
    );
    /**
     * @dev Revert with an error when insufficient native tokens are supplied as
     *      part of msg.value when fulfilling orders.
     */
    error InsufficientNativeTokensSupplied();
    /**
     * @dev Revert with an error when a native token transfer reverts.
     */
    error NativeTokenTransferGenericFailure(address account, uint256 amount);
    /**
     * @dev Revert with an error when a partial fill is attempted on an order
     *      that does not specify partial fill support in its order type.
     */
    error PartialFillsNotEnabledForOrder();
    /**
     * @dev Revert with an error when attempting to fill an order that has been
     *      cancelled.
     *
     * @param orderHash The hash of the cancelled order.
     */
    error OrderIsCancelled(bytes32 orderHash);
    /**
     * @dev Revert with an error when attempting to fill a basic order that has
     *      been partially filled.
     *
     * @param orderHash The hash of the partially used order.
     */
    error OrderPartiallyFilled(bytes32 orderHash);
    /**
     * @dev Revert with an error when attempting to cancel an order as a caller
     *      other than the indicated offerer or zone or when attempting to
     *      cancel a contract order.
     */
    error CannotCancelOrder();
    /**
     * @dev Revert with an error when supplying a fraction with a value of zero
     *      for the numerator or denominator, or one where the numerator exceeds
     *      the denominator.
     */
    error BadFraction();
    /**
     * @dev Revert with an error when a caller attempts to supply callvalue to a
     *      non-payable basic order route or does not supply any callvalue to a
     *      payable basic order route.
     */
    error InvalidMsgValue(uint256 value);
    /**
     * @dev Revert with an error when attempting to fill a basic order using
     *      calldata not produced by default ABI encoding.
     */
    error InvalidBasicOrderParameterEncoding();
    /**
     * @dev Revert with an error when attempting to fulfill any number of
     *      available orders when none are fulfillable.
     */
    error NoSpecifiedOrdersAvailable();
    /**
     * @dev Revert with an error when attempting to fulfill an order with an
     *      offer for a native token outside of matching orders.
     */
    error InvalidNativeOfferItem();
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    ReentrancyErrors
} from "seaport-types/src/interfaces/ReentrancyErrors.sol";
import { LowLevelHelpers } from "./LowLevelHelpers.sol";
import {
    _revertInvalidMsgValue,
    _revertNoReentrantCalls
} from "seaport-types/src/lib/ConsiderationErrors.sol";
import {
    _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_SSTORE,
    _ENTERED_SSTORE,
    _NOT_ENTERED_SSTORE,
    _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_TSTORE,
    _ENTERED_TSTORE,
    _NOT_ENTERED_TSTORE,
    _TSTORE_ENABLED_SSTORE,
    _REENTRANCY_GUARD_SLOT,
    _TLOAD_TEST_PAYLOAD,
    _TLOAD_TEST_PAYLOAD_OFFSET,
    _TLOAD_TEST_PAYLOAD_LENGTH
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    InvalidMsgValue_error_selector,
    InvalidMsgValue_error_length,
    InvalidMsgValue_error_value_ptr,
    NoReentrantCalls_error_selector,
    NoReentrantCalls_error_length,
    Error_selector_offset
} from "seaport-types/src/lib/ConsiderationErrorConstants.sol";
/**
 * @title ReentrancyGuard
 * @author 0age
 * @notice ReentrancyGuard contains a storage variable (or a transient storage
 *         variable in EVM environments that support it once activated) and
 *         related functionality for protecting against reentrancy.
 */
contract ReentrancyGuard is ReentrancyErrors, LowLevelHelpers {
    // Declare an immutable variable to store the initial TSTORE support status.
    bool private immutable _tstoreInitialSupport;
    // Declare an immutable variable to store the tstore test contract address.
    address private immutable _tloadTestContract;
    /**
     * @dev Initialize the reentrancy guard during deployment. This involves
     *      attempting to deploy a contract that utilizes TLOAD as part of the
     *      contract construction bytecode, and configuring initial support for
     *      using TSTORE in place of SSTORE for the reentrancy lock based on the
     *      result.
     */
    constructor() {
        // Deploy the contract testing TLOAD support and store the address.
        address tloadTestContract = _prepareTloadTest();
        // Ensure the deployment was successful.
        if (tloadTestContract == address(0)) {
            revert TloadTestContractDeploymentFailed();
        }
        // Determine if TSTORE is supported.
        bool tstoreInitialSupport = _testTload(tloadTestContract);
        // Store the result as an immutable.
        _tstoreInitialSupport = tstoreInitialSupport;
        // Set the address of the deployed TLOAD test contract as an immutable.
        _tloadTestContract = tloadTestContract;
        // If not using TSTORE (where _NOT_ENTERED_TSTORE = 0), set initial
        // sentinel value (where _NOT_ENTERED_SSTORE = 1).
        if (!tstoreInitialSupport) {
            // Initialize storage for the reentrancy guard in a cleared state.
            assembly {
                sstore(_REENTRANCY_GUARD_SLOT, _NOT_ENTERED_SSTORE)
            }
        }
    }
    /**
     * @dev External function to activate TSTORE usage for the reentrancy guard.
     *      Does not need to be called if TSTORE is supported from deployment,
     *      and only needs to be called once. Reverts if TSTORE has already been
     *      activated, if the opcode is not available, or if the reentrancy
     *      guard is currently set.
     */
    function __activateTstore() external {
        // Determine if TSTORE can potentially be activated. If it has already
        // been activated, or if the reentrancy guard is currently set, then
        // it cannot be activated.
        bool tstoreActivatable;
        assembly {
            tstoreActivatable := eq(
                sload(_REENTRANCY_GUARD_SLOT),
                _NOT_ENTERED_SSTORE
            )
        }
        // Revert if TSTORE is already activated or not activatable.
        if (_tstoreInitialSupport || !tstoreActivatable) {
            revert TStoreAlreadyActivated();
        }
        // Determine if TSTORE can be activated and revert if not.
        if (!_testTload(_tloadTestContract)) {
            revert TStoreNotSupported();
        }
        // Mark TSTORE as activated.
        assembly {
            sstore(_REENTRANCY_GUARD_SLOT, _TSTORE_ENABLED_SSTORE)
        }
    }
    /**
     * @dev Internal function to ensure that a sentinel value for the reentrancy
     *      guard is not currently set and, if not, to set a sentinel value for
     *      the reentrancy guard based on whether or not native tokens may be
     *      received during execution or not.
     *
     * @param acceptNativeTokens A boolean indicating whether native tokens may
     *                           be received during execution or not.
     */
    function _setReentrancyGuard(bool acceptNativeTokens) internal {
        // Place immutable variable on the stack access within inline assembly.
        bool tstoreInitialSupport = _tstoreInitialSupport;
        // Utilize assembly to set the reentrancy guard based on tstore support.
        assembly {
            // "Loop" over three possible cases for setting the reentrancy guard
            // based on tstore support and state, exiting once the respective
            // state has been identified and a corresponding guard has been set.
            for {} 1 {} {
                // 1: handle case where tstore is supported from the start.
                if tstoreInitialSupport {
                    // Ensure that the reentrancy guard is not already set.
                    if tload(_REENTRANCY_GUARD_SLOT) {
                        // Store left-padded selector with push4,
                        // mem[28:32] = selector
                        mstore(0, NoReentrantCalls_error_selector)
                        // revert(abi.encodeWithSignature("NoReentrantCalls()"))
                        revert(
                            Error_selector_offset,
                            NoReentrantCalls_error_length
                        )
                    }
                    // Set the reentrancy guard. A value of 1 indicates that
                    // native tokens may not be accepted during execution,
                    // whereas a value of 2 indicates that they will be accepted
                    // (returning any remaining native tokens to the caller).
                    tstore(
                        _REENTRANCY_GUARD_SLOT,
                        add(_ENTERED_TSTORE, acceptNativeTokens)
                    )
                    // Exit the loop.
                    break
                }
                // Retrieve the reentrancy guard sentinel value.
                let reentrancyGuard := sload(_REENTRANCY_GUARD_SLOT)
                // 2: handle tstore support that was activated post-deployment.
                if iszero(reentrancyGuard) {
                    // Ensure that the reentrancy guard is not already set.
                    if tload(_REENTRANCY_GUARD_SLOT) {
                        // Store left-padded selector with push4,
                        // mem[28:32] = selector
                        mstore(0, NoReentrantCalls_error_selector)
                        // revert(abi.encodeWithSignature("NoReentrantCalls()"))
                        revert(
                            Error_selector_offset,
                            NoReentrantCalls_error_length
                        )
                    }
                    // Set the reentrancy guard. A value of 1 indicates that
                    // native tokens may not be accepted during execution,
                    // whereas a value of 2 indicates that they will be accepted
                    // (returning any remaining native tokens to the caller).
                    tstore(
                        _REENTRANCY_GUARD_SLOT,
                        add(_ENTERED_TSTORE, acceptNativeTokens)
                    )
                    // Exit the loop.
                    break
                }
                // 3: handle case where tstore support has not been activated.
                // Ensure that the reentrancy guard is not already set.
                if iszero(eq(reentrancyGuard, _NOT_ENTERED_SSTORE)) {
                    // Store left-padded selector with push4 (reduces bytecode),
                    // mem[28:32] = selector
                    mstore(0, NoReentrantCalls_error_selector)
                    // revert(abi.encodeWithSignature("NoReentrantCalls()"))
                    revert(Error_selector_offset, NoReentrantCalls_error_length)
                }
                // Set the reentrancy guard. A value of 2 indicates that native
                // tokens may not be accepted during execution, whereas a value
                // of 3 indicates that they will be accepted (with any remaining
                // native tokens returned to the caller).
                sstore(
                    _REENTRANCY_GUARD_SLOT,
                    add(_ENTERED_SSTORE, acceptNativeTokens)
                )
                // Exit the loop.
                break
            }
        }
    }
    /**
     * @dev Internal function to unset the reentrancy guard sentinel value.
     */
    function _clearReentrancyGuard() internal {
        // Place immutable variable on the stack access within inline assembly.
        bool tstoreInitialSupport = _tstoreInitialSupport;
        // Utilize assembly to clear reentrancy guard based on tstore support.
        assembly {
            // "Loop" over three possible cases for clearing reentrancy guard
            // based on tstore support and state, exiting once the respective
            // state has been identified and corresponding guard cleared.
            for {} 1 {} {
                // 1: handle case where tstore is supported from the start.
                if tstoreInitialSupport {
                    // Clear the reentrancy guard.
                    tstore(_REENTRANCY_GUARD_SLOT, _NOT_ENTERED_TSTORE)
                    // Exit the loop.
                    break
                }
                // Retrieve the reentrancy guard sentinel value.
                let reentrancyGuard := sload(_REENTRANCY_GUARD_SLOT)
                // 2: handle tstore support that was activated post-deployment.
                if iszero(reentrancyGuard) {
                    // Clear the reentrancy guard.
                    tstore(_REENTRANCY_GUARD_SLOT, _NOT_ENTERED_TSTORE)
                    // Exit the loop.
                    break
                }
                // 3: handle case where tstore support has not been activated.
                // Clear the reentrancy guard.
                sstore(_REENTRANCY_GUARD_SLOT, _NOT_ENTERED_SSTORE)
                // Exit the loop.
                break
            }
        }
    }
    /**
     * @dev Internal view function to ensure that a sentinel value for the
     *      reentrancy guard is not currently set.
     */
    function _assertNonReentrant() internal view {
        // Place immutable variable on the stack access within inline assembly.
        bool tstoreInitialSupport = _tstoreInitialSupport;
        // Utilize assembly to check reentrancy guard based on tstore support.
        assembly {
            // 1: handle case where tstore is supported from the start.
            if tstoreInitialSupport {
                // Ensure that the reentrancy guard is not currently set.
                if tload(_REENTRANCY_GUARD_SLOT) {
                    // Store left-padded selector with push4,
                    // mem[28:32] = selector
                    mstore(0, NoReentrantCalls_error_selector)
                    // revert(abi.encodeWithSignature("NoReentrantCalls()"))
                    revert(Error_selector_offset, NoReentrantCalls_error_length)
                }
            }
            // Handle cases where tstore is not initially supported.
            if iszero(tstoreInitialSupport) {
                // Retrieve the reentrancy guard sentinel value.
                let reentrancyGuard := sload(_REENTRANCY_GUARD_SLOT)
                // 2: handle tstore support that was activated post-deployment.
                if iszero(reentrancyGuard) {
                    // Ensure that the reentrancy guard is not currently set.
                    if tload(_REENTRANCY_GUARD_SLOT) {
                        // Store left-padded selector with push4,
                        // mem[28:32] = selector
                        mstore(0, NoReentrantCalls_error_selector)
                        // revert(abi.encodeWithSignature("NoReentrantCalls()"))
                        revert(
                            Error_selector_offset,
                            NoReentrantCalls_error_length
                        )
                    }
                }
                // 3: handle case where tstore support has not been activated.
                // Ensure that the reentrancy guard is not currently set.
                if gt(reentrancyGuard, _NOT_ENTERED_SSTORE) {
                    // Store left-padded selector with push4 (reduces bytecode),
                    // mem[28:32] = selector
                    mstore(0, NoReentrantCalls_error_selector)
                    // revert(abi.encodeWithSignature("NoReentrantCalls()"))
                    revert(Error_selector_offset, NoReentrantCalls_error_length)
                }
            }
        }
    }
    /**
     * @dev Internal view function to ensure that the sentinel value indicating
     *      native tokens may be received during execution is currently set.
     */
    function _assertAcceptingNativeTokens() internal view {
        // Place immutable variable on the stack access within inline assembly.
        bool tstoreInitialSupport = _tstoreInitialSupport;
        // Utilize assembly to check reentrancy guard based on tstore support.
        assembly {
            // 1: handle case where tstore is supported from the start.
            if tstoreInitialSupport {
                // Ensure reentrancy guard is set to accept native tokens.
                if iszero(
                    eq(
                        tload(_REENTRANCY_GUARD_SLOT),
                        _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_TSTORE
                    )
                ) {
                    // Store left-padded selector with push4,
                    // mem[28:32] = selector
                    mstore(0, InvalidMsgValue_error_selector)
                    // Store argument.
                    mstore(InvalidMsgValue_error_value_ptr, callvalue())
                    // revert(abi.encodeWithSignature(
                    //   "InvalidMsgValue(uint256)", value)
                    // )
                    revert(Error_selector_offset, InvalidMsgValue_error_length)
                }
            }
            // Handle cases where tstore is not initially supported.
            if iszero(tstoreInitialSupport) {
                // Retrieve the reentrancy guard sentinel value.
                let reentrancyGuard := sload(_REENTRANCY_GUARD_SLOT)
                // 2: handle tstore support that was activated post-deployment.
                if iszero(reentrancyGuard) {
                    // Ensure reentrancy guard is set to accept native tokens.
                    if iszero(
                        eq(
                            tload(_REENTRANCY_GUARD_SLOT),
                            _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_TSTORE
                        )
                    ) {
                        // Store left-padded selector with push4,
                        // mem[28:32] = selector
                        mstore(0, InvalidMsgValue_error_selector)
                        // Store argument.
                        mstore(InvalidMsgValue_error_value_ptr, callvalue())
                        // revert(abi.encodeWithSignature(
                        //   "InvalidMsgValue(uint256)", value)
                        // )
                        revert(
                            Error_selector_offset,
                            InvalidMsgValue_error_length
                        )
                    }
                }
                // 3: handle case where tstore support has not been activated.
                // Ensure reentrancy guard is set to accepting native tokens.
                if and(
                    iszero(iszero(reentrancyGuard)),
                    iszero(
                        eq(
                            reentrancyGuard,
                            _ENTERED_AND_ACCEPTING_NATIVE_TOKENS_SSTORE
                        )
                    )
                ) {
                    // Store left-padded selector with push4 (reduces bytecode),
                    // mem[28:32] = selector
                    mstore(0, InvalidMsgValue_error_selector)
                    // Store argument.
                    mstore(InvalidMsgValue_error_value_ptr, callvalue())
                    // revert(abi.encodeWithSignature(
                    //   "InvalidMsgValue(uint256)", value)
                    // )
                    revert(Error_selector_offset, InvalidMsgValue_error_length)
                }
            }
        }
    }
    /**
     * @dev Private function to deploy a test contract that utilizes TLOAD as
     *      part of its fallback logic.
     */
    function _prepareTloadTest() private returns (address contractAddress) {
        // Utilize assembly to deploy a contract testing TLOAD support.
        assembly {
            // Write the contract deployment code payload to scratch space.
            mstore(0, _TLOAD_TEST_PAYLOAD)
            // Deploy the contract.
            contractAddress := create(
                0,
                _TLOAD_TEST_PAYLOAD_OFFSET,
                _TLOAD_TEST_PAYLOAD_LENGTH
            )
        }
    }
    /**
     * @dev Private view function to determine if TSTORE/TLOAD are supported by
     *      the current EVM implementation by attempting to call the test
     *      contract, which utilizes TLOAD as part of its fallback logic.
     */
    function _testTload(
        address tloadTestContract
    ) private view returns (bool ok) {
        // Call the test contract, which will perform a TLOAD test. If the call
        // does not revert, then TLOAD/TSTORE is supported. Do not forward all
        // available gas, as all forwarded gas will be consumed on revert.
        (ok, ) = tloadTestContract.staticcall{ gas: gasleft() / 10 }("");
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/**
 * @title ConduitControllerInterface
 * @author 0age
 * @notice ConduitControllerInterface contains all external function interfaces,
 *         structs, events, and errors for the conduit controller.
 */
interface ConduitControllerInterface {
    /**
     * @dev Track the conduit key, current owner, new potential owner, and open
     *      channels for each deployed conduit.
     */
    struct ConduitProperties {
        bytes32 key;
        address owner;
        address potentialOwner;
        address[] channels;
        mapping(address => uint256) channelIndexesPlusOne;
    }
    /**
     * @dev Emit an event whenever a new conduit is created.
     *
     * @param conduit    The newly created conduit.
     * @param conduitKey The conduit key used to create the new conduit.
     */
    event NewConduit(address conduit, bytes32 conduitKey);
    /**
     * @dev Emit an event whenever conduit ownership is transferred.
     *
     * @param conduit       The conduit for which ownership has been
     *                      transferred.
     * @param previousOwner The previous owner of the conduit.
     * @param newOwner      The new owner of the conduit.
     */
    event OwnershipTransferred(
        address indexed conduit,
        address indexed previousOwner,
        address indexed newOwner
    );
    /**
     * @dev Emit an event whenever a conduit owner registers a new potential
     *      owner for that conduit.
     *
     * @param newPotentialOwner The new potential owner of the conduit.
     */
    event PotentialOwnerUpdated(address indexed newPotentialOwner);
    /**
     * @dev Revert with an error when attempting to create a new conduit using a
     *      conduit key where the first twenty bytes of the key do not match the
     *      address of the caller.
     */
    error InvalidCreator();
    /**
     * @dev Revert with an error when attempting to create a new conduit when no
     *      initial owner address is supplied.
     */
    error InvalidInitialOwner();
    /**
     * @dev Revert with an error when attempting to set a new potential owner
     *      that is already set.
     */
    error NewPotentialOwnerAlreadySet(
        address conduit,
        address newPotentialOwner
    );
    /**
     * @dev Revert with an error when attempting to cancel ownership transfer
     *      when no new potential owner is currently set.
     */
    error NoPotentialOwnerCurrentlySet(address conduit);
    /**
     * @dev Revert with an error when attempting to interact with a conduit that
     *      does not yet exist.
     */
    error NoConduit();
    /**
     * @dev Revert with an error when attempting to create a conduit that
     *      already exists.
     */
    error ConduitAlreadyExists(address conduit);
    /**
     * @dev Revert with an error when attempting to update channels or transfer
     *      ownership of a conduit when the caller is not the owner of the
     *      conduit in question.
     */
    error CallerIsNotOwner(address conduit);
    /**
     * @dev Revert with an error when attempting to register a new potential
     *      owner and supplying the null address.
     */
    error NewPotentialOwnerIsZeroAddress(address conduit);
    /**
     * @dev Revert with an error when attempting to claim ownership of a conduit
     *      with a caller that is not the current potential owner for the
     *      conduit in question.
     */
    error CallerIsNotNewPotentialOwner(address conduit);
    /**
     * @dev Revert with an error when attempting to retrieve a channel using an
     *      index that is out of range.
     */
    error ChannelOutOfRange(address conduit);
    /**
     * @notice Deploy a new conduit using a supplied conduit key and assigning
     *         an initial owner for the deployed conduit. Note that the first
     *         twenty bytes of the supplied conduit key must match the caller
     *         and that a new conduit cannot be created if one has already been
     *         deployed using the same conduit key.
     *
     * @param conduitKey   The conduit key used to deploy the conduit. Note that
     *                     the first twenty bytes of the conduit key must match
     *                     the caller of this contract.
     * @param initialOwner The initial owner to set for the new conduit.
     *
     * @return conduit The address of the newly deployed conduit.
     */
    function createConduit(
        bytes32 conduitKey,
        address initialOwner
    ) external returns (address conduit);
    /**
     * @notice Open or close a channel on a given conduit, thereby allowing the
     *         specified account to execute transfers against that conduit.
     *         Extreme care must be taken when updating channels, as malicious
     *         or vulnerable channels can transfer any ERC20, ERC721 and ERC1155
     *         tokens where the token holder has granted the conduit approval.
     *         Only the owner of the conduit in question may call this function.
     *
     * @param conduit The conduit for which to open or close the channel.
     * @param channel The channel to open or close on the conduit.
     * @param isOpen  A boolean indicating whether to open or close the channel.
     */
    function updateChannel(
        address conduit,
        address channel,
        bool isOpen
    ) external;
    /**
     * @notice Initiate conduit ownership transfer by assigning a new potential
     *         owner for the given conduit. Once set, the new potential owner
     *         may call `acceptOwnership` to claim ownership of the conduit.
     *         Only the owner of the conduit in question may call this function.
     *
     * @param conduit The conduit for which to initiate ownership transfer.
     * @param newPotentialOwner The new potential owner of the conduit.
     */
    function transferOwnership(
        address conduit,
        address newPotentialOwner
    ) external;
    /**
     * @notice Clear the currently set potential owner, if any, from a conduit.
     *         Only the owner of the conduit in question may call this function.
     *
     * @param conduit The conduit for which to cancel ownership transfer.
     */
    function cancelOwnershipTransfer(address conduit) external;
    /**
     * @notice Accept ownership of a supplied conduit. Only accounts that the
     *         current owner has set as the new potential owner may call this
     *         function.
     *
     * @param conduit The conduit for which to accept ownership.
     */
    function acceptOwnership(address conduit) external;
    /**
     * @notice Retrieve the current owner of a deployed conduit.
     *
     * @param conduit The conduit for which to retrieve the associated owner.
     *
     * @return owner The owner of the supplied conduit.
     */
    function ownerOf(address conduit) external view returns (address owner);
    /**
     * @notice Retrieve the conduit key for a deployed conduit via reverse
     *         lookup.
     *
     * @param conduit The conduit for which to retrieve the associated conduit
     *                key.
     *
     * @return conduitKey The conduit key used to deploy the supplied conduit.
     */
    function getKey(address conduit) external view returns (bytes32 conduitKey);
    /**
     * @notice Derive the conduit associated with a given conduit key and
     *         determine whether that conduit exists (i.e. whether it has been
     *         deployed).
     *
     * @param conduitKey The conduit key used to derive the conduit.
     *
     * @return conduit The derived address of the conduit.
     * @return exists  A boolean indicating whether the derived conduit has been
     *                 deployed or not.
     */
    function getConduit(
        bytes32 conduitKey
    ) external view returns (address conduit, bool exists);
    /**
     * @notice Retrieve the potential owner, if any, for a given conduit. The
     *         current owner may set a new potential owner via
     *         `transferOwnership` and that owner may then accept ownership of
     *         the conduit in question via `acceptOwnership`.
     *
     * @param conduit The conduit for which to retrieve the potential owner.
     *
     * @return potentialOwner The potential owner, if any, for the conduit.
     */
    function getPotentialOwner(
        address conduit
    ) external view returns (address potentialOwner);
    /**
     * @notice Retrieve the status (either open or closed) of a given channel on
     *         a conduit.
     *
     * @param conduit The conduit for which to retrieve the channel status.
     * @param channel The channel for which to retrieve the status.
     *
     * @return isOpen The status of the channel on the given conduit.
     */
    function getChannelStatus(
        address conduit,
        address channel
    ) external view returns (bool isOpen);
    /**
     * @notice Retrieve the total number of open channels for a given conduit.
     *
     * @param conduit The conduit for which to retrieve the total channel count.
     *
     * @return totalChannels The total number of open channels for the conduit.
     */
    function getTotalChannels(
        address conduit
    ) external view returns (uint256 totalChannels);
    /**
     * @notice Retrieve an open channel at a specific index for a given conduit.
     *         Note that the index of a channel can change as a result of other
     *         channels being closed on the conduit.
     *
     * @param conduit      The conduit for which to retrieve the open channel.
     * @param channelIndex The index of the channel in question.
     *
     * @return channel The open channel, if any, at the specified channel index.
     */
    function getChannel(
        address conduit,
        uint256 channelIndex
    ) external view returns (address channel);
    /**
     * @notice Retrieve all open channels for a given conduit. Note that calling
     *         this function for a conduit with many channels will revert with
     *         an out-of-gas error.
     *
     * @param conduit The conduit for which to retrieve open channels.
     *
     * @return channels An array of open channels on the given conduit.
     */
    function getChannels(
        address conduit
    ) external view returns (address[] memory channels);
    /**
     * @dev Retrieve the conduit creation code and runtime code hashes.
     */
    function getConduitCodeHashes()
        external
        view
        returns (bytes32 creationCodeHash, bytes32 runtimeCodeHash);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
import {
    AdvancedOrder,
    ConsiderationItem,
    CriteriaResolver,
    Fulfillment,
    FulfillmentComponent,
    OfferItem,
    Order,
    OrderParameters,
    ReceivedItem
} from "seaport-types/src/lib/ConsiderationStructs.sol";
import {
    AdvancedOrder_denominator_offset,
    AdvancedOrder_extraData_offset,
    AdvancedOrder_fixed_segment_0,
    AdvancedOrder_head_size,
    AdvancedOrder_numerator_offset,
    AdvancedOrder_signature_offset,
    AdvancedOrderPlusOrderParameters_head_size,
    Common_amount_offset,
    Common_endAmount_offset,
    Common_identifier_offset,
    Common_token_offset,
    ConsiderationItem_recipient_offset,
    ConsiderationItem_size_with_head_pointer,
    ConsiderationItem_size,
    CriteriaResolver_criteriaProof_offset,
    CriteriaResolver_fixed_segment_0,
    CriteriaResolver_head_size,
    ThreeWords,
    FreeMemoryPointerSlot,
    Fulfillment_considerationComponents_offset,
    Fulfillment_head_size,
    FulfillmentComponent_mem_tail_size_shift,
    FulfillmentComponent_mem_tail_size,
    generateOrder_maximum_returned_array_length,
    OfferItem_size_with_head_pointer,
    OfferItem_size,
    OneWord,
    OneWordShift,
    OnlyFullWordMask,
    Order_head_size,
    Order_signature_offset,
    OrderComponents_OrderParameters_common_head_size,
    OrderParameters_consideration_head_offset,
    OrderParameters_head_size,
    OrderParameters_offer_head_offset,
    OrderParameters_totalOriginalConsiderationItems_offset,
    ReceivedItem_recipient_offset,
    ReceivedItem_size,
    ReceivedItem_size_excluding_recipient,
    SpentItem_size_shift,
    SpentItem_size,
    ThirtyOneBytes,
    TwoWords
} from "seaport-types/src/lib/ConsiderationConstants.sol";
import {
    CalldataPointer,
    malloc,
    MemoryPointer,
    OffsetOrLengthMask
} from "seaport-types/src/helpers/PointerLibraries.sol";
contract ConsiderationDecoder {
    /**
     * @dev Takes a bytes array from calldata and copies it into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the bytes array in
     *                    calldata which contains the length of the array.
     *
     * @return mPtrLength A memory pointer to the start of the bytes array in
     *                    memory which contains the length of the array.
     */
    function _decodeBytes(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        assembly {
            // Get the current free memory pointer.
            mPtrLength := mload(FreeMemoryPointerSlot)
            // Derive the size of the bytes array, rounding up to nearest word
            // and adding a word for the length field. Note: masking
            // `calldataload(cdPtrLength)` is redundant here.
            let size := add(
                and(
                    add(calldataload(cdPtrLength), ThirtyOneBytes),
                    OnlyFullWordMask
                ),
                OneWord
            )
            // Copy bytes from calldata into memory based on pointers and size.
            calldatacopy(mPtrLength, cdPtrLength, size)
            // Store the masked value in memory. Note: the value of `size` is at
            // least 32, meaning the calldatacopy above will at least write to
            // `[mPtrLength, mPtrLength + 32)`.
            mstore(
                mPtrLength,
                and(calldataload(cdPtrLength), OffsetOrLengthMask)
            )
            // Update free memory pointer based on the size of the bytes array.
            mstore(FreeMemoryPointerSlot, add(mPtrLength, size))
        }
    }
    /**
     * @dev Takes an offer array from calldata and copies it into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the offer array
     *                    in calldata which contains the length of the array.
     *
     * @return mPtrLength A memory pointer to the start of the offer array in
     *                    memory which contains the length of the array.
     */
    function _decodeOffer(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        assembly {
            // Retrieve length of array, masking to prevent potential overflow.
            let arrLength := and(calldataload(cdPtrLength), OffsetOrLengthMask)
            // Get the current free memory pointer.
            mPtrLength := mload(FreeMemoryPointerSlot)
            // Write the array length to memory.
            mstore(mPtrLength, arrLength)
            // Derive the head by adding one word to the length pointer.
            let mPtrHead := add(mPtrLength, OneWord)
            // Derive the tail by adding one word per element (note that structs
            // are written to memory with an offset per struct element).
            let mPtrTail := add(mPtrHead, shl(OneWordShift, arrLength))
            // Track the next tail, beginning with the initial tail value.
            let mPtrTailNext := mPtrTail
            // Copy all offer array data into memory at the tail pointer.
            calldatacopy(
                mPtrTail,
                add(cdPtrLength, OneWord),
                mul(arrLength, OfferItem_size)
            )
            // Track the next head pointer, starting with initial head value.
            let mPtrHeadNext := mPtrHead
            // Iterate over each head pointer until it reaches the tail.
            for {
            } lt(mPtrHeadNext, mPtrTail) {
            } {
                // Write the next tail pointer to next head pointer in memory.
                mstore(mPtrHeadNext, mPtrTailNext)
                // Increment the next head pointer by one word.
                mPtrHeadNext := add(mPtrHeadNext, OneWord)
                // Increment the next tail pointer by the size of an offer item.
                mPtrTailNext := add(mPtrTailNext, OfferItem_size)
            }
            // Update free memory pointer to allocate memory up to end of tail.
            mstore(FreeMemoryPointerSlot, mPtrTailNext)
        }
    }
    /**
     * @dev Takes a consideration array from calldata and copies it into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the consideration
     *                    array in calldata which contains the length of the
     *                    array.
     *
     * @return mPtrLength A memory pointer to the start of the consideration
     *                    array in memory which contains the length of the
     *                    array.
     */
    function _decodeConsideration(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        assembly {
            // Retrieve length of array, masking to prevent potential overflow.
            let arrLength := and(calldataload(cdPtrLength), OffsetOrLengthMask)
            // Get the current free memory pointer.
            mPtrLength := mload(FreeMemoryPointerSlot)
            // Write the array length to memory.
            mstore(mPtrLength, arrLength)
            // Derive the head by adding one word to the length pointer.
            let mPtrHead := add(mPtrLength, OneWord)
            // Derive the tail by adding one word per element (note that structs
            // are written to memory with an offset per struct element).
            let mPtrTail := add(mPtrHead, shl(OneWordShift, arrLength))
            // Track the next tail, beginning with the initial tail value.
            let mPtrTailNext := mPtrTail
            // Copy all consideration array data into memory at tail pointer.
            calldatacopy(
                mPtrTail,
                add(cdPtrLength, OneWord),
                mul(arrLength, ConsiderationItem_size)
            )
            // Track the next head pointer, starting with initial head value.
            let mPtrHeadNext := mPtrHead
            // Iterate over each head pointer until it reaches the tail.
            for {
            } lt(mPtrHeadNext, mPtrTail) {
            } {
                // Write the next tail pointer to next head pointer in memory.
                mstore(mPtrHeadNext, mPtrTailNext)
                // Increment the next head pointer by one word.
                mPtrHeadNext := add(mPtrHeadNext, OneWord)
                // Increment next tail pointer by size of a consideration item.
                mPtrTailNext := add(mPtrTailNext, ConsiderationItem_size)
            }
            // Update free memory pointer to allocate memory up to end of tail.
            mstore(FreeMemoryPointerSlot, mPtrTailNext)
        }
    }
    /**
     * @dev Takes a calldata pointer and memory pointer and copies a referenced
     *      OrderParameters struct and associated offer and consideration data
     *      to memory.
     *
     * @param cdPtr A calldata pointer for the OrderParameters struct.
     * @param mPtr A memory pointer to the OrderParameters struct head.
     */
    function _decodeOrderParametersTo(
        CalldataPointer cdPtr,
        MemoryPointer mPtr
    ) internal pure {
        // Copy the full OrderParameters head from calldata to memory.
        cdPtr.copy(mPtr, OrderParameters_head_size);
        // Resolve the offer calldata offset, use that to decode and copy offer
        // from calldata, and write resultant memory offset to head in memory.
        mPtr.offset(OrderParameters_offer_head_offset).write(
            _decodeOffer(cdPtr.pptrOffset(OrderParameters_offer_head_offset))
        );
        // Resolve consideration calldata offset, use that to copy consideration
        // from calldata, and write resultant memory offset to head in memory.
        mPtr.offset(OrderParameters_consideration_head_offset).write(
            _decodeConsideration(
                cdPtr.pptrOffset(OrderParameters_consideration_head_offset)
            )
        );
    }
    /**
     * @dev Takes a calldata pointer to an OrderParameters struct and copies the
     *      decoded struct to memory.
     *
     * @param cdPtr A calldata pointer for the OrderParameters struct.
     *
     * @return mPtr A memory pointer to the OrderParameters struct head.
     */
    function _decodeOrderParameters(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate required memory for the OrderParameters head (offer and
        // consideration are allocated independently).
        mPtr = malloc(OrderParameters_head_size);
        // Decode and copy the order parameters to the newly allocated memory.
        _decodeOrderParametersTo(cdPtr, mPtr);
    }
    /**
     * @dev Takes a calldata pointer to an Order struct and copies the decoded
     *      struct to memory.
     *
     * @param cdPtr A calldata pointer for the Order struct.
     *
     * @return mPtr A memory pointer to the Order struct head.
     */
    function _decodeOrder(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate required memory for the Order head (OrderParameters and
        // signature are allocated independently).
        mPtr = malloc(Order_head_size);
        // Resolve OrderParameters calldata offset, use it to decode and copy
        // from calldata, and write resultant memory offset to head in memory.
        mPtr.write(_decodeOrderParameters(cdPtr.pptr()));
        // Resolve signature calldata offset, use that to decode and copy from
        // calldata, and write resultant memory offset to head in memory.
        mPtr.offset(Order_signature_offset).write(
            _decodeBytes(cdPtr.pptrOffset(Order_signature_offset))
        );
    }
    /**
     * @dev Takes a calldata pointer to an AdvancedOrder struct and copies the
     *      decoded struct to memory.
     *
     * @param cdPtr A calldata pointer for the AdvancedOrder struct.
     *
     * @return mPtr A memory pointer to the AdvancedOrder struct head.
     */
    function _decodeAdvancedOrder(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate memory for AdvancedOrder head and OrderParameters head.
        mPtr = malloc(AdvancedOrderPlusOrderParameters_head_size);
        // Use numerator + denominator calldata offset to decode and copy
        // from calldata and write resultant memory offset to head in memory.
        cdPtr.offset(AdvancedOrder_numerator_offset).copy(
            mPtr.offset(AdvancedOrder_numerator_offset),
            AdvancedOrder_fixed_segment_0
        );
        // Get pointer to memory immediately after advanced order.
        MemoryPointer mPtrParameters = mPtr.offset(AdvancedOrder_head_size);
        // Write pptr for advanced order parameters to memory.
        mPtr.write(mPtrParameters);
        // Resolve OrderParameters calldata pointer & write to allocated region.
        _decodeOrderParametersTo(cdPtr.pptr(), mPtrParameters);
        // Resolve signature calldata offset, use that to decode and copy from
        // calldata, and write resultant memory offset to head in memory.
        mPtr.offset(AdvancedOrder_signature_offset).write(
            _decodeBytes(cdPtr.pptrOffset(AdvancedOrder_signature_offset))
        );
        // Resolve extraData calldata offset, use that to decode and copy from
        // calldata, and write resultant memory offset to head in memory.
        mPtr.offset(AdvancedOrder_extraData_offset).write(
            _decodeBytes(cdPtr.pptrOffset(AdvancedOrder_extraData_offset))
        );
    }
    /**
     * @dev Allocates a single word of empty bytes in memory and returns the
     *      pointer to that memory region.
     *
     * @return mPtr The memory pointer to the new empty word in memory.
     */
    function _getEmptyBytesOrArray()
        internal
        pure
        returns (MemoryPointer mPtr)
    {
        mPtr = malloc(OneWord);
        mPtr.write(0);
    }
    /**
     * @dev Takes a calldata pointer to an Order struct and copies the decoded
     *      struct to memory as an AdvancedOrder.
     *
     * @param cdPtr A calldata pointer for the Order struct.
     *
     * @return mPtr A memory pointer to the AdvancedOrder struct head.
     */
    function _decodeOrderAsAdvancedOrder(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate memory for AdvancedOrder head and OrderParameters head.
        mPtr = malloc(AdvancedOrderPlusOrderParameters_head_size);
        // Get pointer to memory immediately after advanced order.
        MemoryPointer mPtrParameters = mPtr.offset(AdvancedOrder_head_size);
        // Write pptr for advanced order parameters.
        mPtr.write(mPtrParameters);
        // Resolve OrderParameters calldata pointer & write to allocated region.
        _decodeOrderParametersTo(cdPtr.pptr(), mPtrParameters);
        // Write default Order numerator and denominator values (i.e. 1/1).
        mPtr.offset(AdvancedOrder_numerator_offset).write(1);
        mPtr.offset(AdvancedOrder_denominator_offset).write(1);
        // Resolve signature calldata offset, use that to decode and copy from
        // calldata, and write resultant memory offset to head in memory.
        mPtr.offset(AdvancedOrder_signature_offset).write(
            _decodeBytes(cdPtr.pptrOffset(Order_signature_offset))
        );
        // Resolve extraData calldata offset, use that to decode and copy from
        // calldata, and write resultant memory offset to head in memory.
        mPtr.offset(AdvancedOrder_extraData_offset).write(
            _getEmptyBytesOrArray()
        );
    }
    /**
     * @dev Takes a calldata pointer to an array of Order structs and copies the
     *      decoded array to memory as an array of AdvancedOrder structs.
     *
     * @param cdPtrLength A calldata pointer to the start of the orders array in
     *                    calldata which contains the length of the array.
     *
     * @return mPtrLength A memory pointer to the start of the array of advanced
     *                    orders in memory which contains length of the array.
     */
    function _decodeOrdersAsAdvancedOrders(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive offset to the tail based on one word per array element.
            uint256 tailOffset = arrLength << OneWordShift;
            // Add one additional word for the length and allocate memory.
            mPtrLength = malloc(tailOffset + OneWord);
            // Write the length of the array to memory.
            mPtrLength.write(arrLength);
            // Advance to first memory & calldata pointers (e.g. after length).
            MemoryPointer mPtrHead = mPtrLength.next();
            CalldataPointer cdPtrHead = cdPtrLength.next();
            // Iterate over each pointer, word by word, until tail is reached.
            for (uint256 offset = 0; offset < tailOffset; offset += OneWord) {
                // Resolve Order calldata offset, use it to decode and copy from
                // calldata, and write resultant AdvancedOrder offset to memory.
                mPtrHead.offset(offset).write(
                    _decodeOrderAsAdvancedOrder(cdPtrHead.pptrOffset(offset))
                );
            }
        }
    }
    /**
     * @dev Takes a calldata pointer to a criteria proof, or an array bytes32
     *      types, and copies the decoded proof to memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the criteria proof
     *                    in calldata which contains the length of the array.
     *
     * @return mPtrLength A memory pointer to the start of the criteria proof
     *                    in memory which contains length of the array.
     */
    function _decodeCriteriaProof(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive array size based on one word per array element and length.
            uint256 arrSize = (arrLength + 1) << OneWordShift;
            // Allocate memory equal to the array size.
            mPtrLength = malloc(arrSize);
            // Copy the array from calldata into memory.
            cdPtrLength.copy(mPtrLength, arrSize);
        }
    }
    /**
     * @dev Takes a calldata pointer to a CriteriaResolver struct and copies the
     *      decoded struct to memory.
     *
     * @param cdPtr A calldata pointer for the CriteriaResolver struct.
     *
     * @return mPtr A memory pointer to the CriteriaResolver struct head.
     */
    function _decodeCriteriaResolver(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate required memory for the CriteriaResolver head (the criteria
        // proof bytes32 array is allocated independently).
        mPtr = malloc(CriteriaResolver_head_size);
        // Decode and copy order index, side, index, and identifier from
        // calldata and write resultant memory offset to head in memory.
        cdPtr.copy(mPtr, CriteriaResolver_fixed_segment_0);
        // Resolve criteria proof calldata offset, use it to decode and copy
        // from calldata, and write resultant memory offset to head in memory.
        mPtr.offset(CriteriaResolver_criteriaProof_offset).write(
            _decodeCriteriaProof(
                cdPtr.pptrOffset(CriteriaResolver_criteriaProof_offset)
            )
        );
    }
    /**
     * @dev Takes an array of criteria resolvers from calldata and copies it
     *      into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the criteria
     *                    resolver array in calldata which contains the length
     *                    of the array.
     *
     * @return mPtrLength A memory pointer to the start of the criteria resolver
     *                    array in memory which contains the length of the
     *                    array.
     */
    function _decodeCriteriaResolvers(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive offset to the tail based on one word per array element.
            uint256 tailOffset = arrLength << OneWordShift;
            // Add one additional word for the length and allocate memory.
            mPtrLength = malloc(tailOffset + OneWord);
            // Write the length of the array to memory.
            mPtrLength.write(arrLength);
            // Advance to first memory & calldata pointers (e.g. after length).
            MemoryPointer mPtrHead = mPtrLength.next();
            CalldataPointer cdPtrHead = cdPtrLength.next();
            // Iterate over each pointer, word by word, until tail is reached.
            for (uint256 offset = 0; offset < tailOffset; offset += OneWord) {
                // Resolve CriteriaResolver calldata offset, use it to decode
                // and copy from calldata, and write resultant memory offset.
                mPtrHead.offset(offset).write(
                    _decodeCriteriaResolver(cdPtrHead.pptrOffset(offset))
                );
            }
        }
    }
    /**
     * @dev Takes an array of orders from calldata and copies it into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the orders array in
     *                    calldata which contains the length of the array.
     *
     * @return mPtrLength A memory pointer to the start of the orders array
     *                    in memory which contains the length of the array.
     */
    function _decodeOrders(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive offset to the tail based on one word per array element.
            uint256 tailOffset = arrLength << OneWordShift;
            // Add one additional word for the length and allocate memory.
            mPtrLength = malloc(tailOffset + OneWord);
            // Write the length of the array to memory.
            mPtrLength.write(arrLength);
            // Advance to first memory & calldata pointers (e.g. after length).
            MemoryPointer mPtrHead = mPtrLength.next();
            CalldataPointer cdPtrHead = cdPtrLength.next();
            // Iterate over each pointer, word by word, until tail is reached.
            for (uint256 offset = 0; offset < tailOffset; offset += OneWord) {
                // Resolve Order calldata offset, use it to decode and copy
                // from calldata, and write resultant memory offset.
                mPtrHead.offset(offset).write(
                    _decodeOrder(cdPtrHead.pptrOffset(offset))
                );
            }
        }
    }
    /**
     * @dev Takes an array of fulfillment components from calldata and copies it
     *      into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the fulfillment
     *                    components array in calldata which contains the length
     *                    of the array.
     *
     * @return mPtrLength A memory pointer to the start of the fulfillment
     *                    components array in memory which contains the length
     *                    of the array.
     */
    function _decodeFulfillmentComponents(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        assembly {
            let arrLength := and(calldataload(cdPtrLength), OffsetOrLengthMask)
            // Get the current free memory pointer.
            mPtrLength := mload(FreeMemoryPointerSlot)
            mstore(mPtrLength, arrLength)
            let mPtrHead := add(mPtrLength, OneWord)
            let mPtrTail := add(mPtrHead, shl(OneWordShift, arrLength))
            let mPtrTailNext := mPtrTail
            calldatacopy(
                mPtrTail,
                add(cdPtrLength, OneWord),
                shl(FulfillmentComponent_mem_tail_size_shift, arrLength)
            )
            let mPtrHeadNext := mPtrHead
            for {
            } lt(mPtrHeadNext, mPtrTail) {
            } {
                mstore(mPtrHeadNext, mPtrTailNext)
                mPtrHeadNext := add(mPtrHeadNext, OneWord)
                mPtrTailNext := add(
                    mPtrTailNext,
                    FulfillmentComponent_mem_tail_size
                )
            }
            // Update the free memory pointer.
            mstore(FreeMemoryPointerSlot, mPtrTailNext)
        }
    }
    /**
     * @dev Takes a nested array of fulfillment components from calldata and
     *      copies it into memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the nested
     *                    fulfillment components array in calldata which
     *                    contains the length of the array.
     *
     * @return mPtrLength A memory pointer to the start of the nested
     *                    fulfillment components array in memory which
     *                    contains the length of the array.
     */
    function _decodeNestedFulfillmentComponents(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive offset to the tail based on one word per array element.
            uint256 tailOffset = arrLength << OneWordShift;
            // Add one additional word for the length and allocate memory.
            mPtrLength = malloc(tailOffset + OneWord);
            // Write the length of the array to memory.
            mPtrLength.write(arrLength);
            // Advance to first memory & calldata pointers (e.g. after length).
            MemoryPointer mPtrHead = mPtrLength.next();
            CalldataPointer cdPtrHead = cdPtrLength.next();
            // Iterate over each pointer, word by word, until tail is reached.
            for (uint256 offset = 0; offset < tailOffset; offset += OneWord) {
                // Resolve FulfillmentComponents array calldata offset, use it
                // to decode and copy from calldata, and write memory offset.
                mPtrHead.offset(offset).write(
                    _decodeFulfillmentComponents(cdPtrHead.pptrOffset(offset))
                );
            }
        }
    }
    /**
     * @dev Takes an array of advanced orders from calldata and copies it into
     *      memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the advanced orders
     *                    array in calldata which contains the length of the
     *                    array.
     *
     * @return mPtrLength A memory pointer to the start of the advanced orders
     *                    array in memory which contains the length of the
     *                    array.
     */
    function _decodeAdvancedOrders(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive offset to the tail based on one word per array element.
            uint256 tailOffset = arrLength << OneWordShift;
            // Add one additional word for the length and allocate memory.
            mPtrLength = malloc(tailOffset + OneWord);
            // Write the length of the array to memory.
            mPtrLength.write(arrLength);
            // Advance to first memory & calldata pointers (e.g. after length).
            MemoryPointer mPtrHead = mPtrLength.next();
            CalldataPointer cdPtrHead = cdPtrLength.next();
            // Iterate over each pointer, word by word, until tail is reached.
            for (uint256 offset = 0; offset < tailOffset; offset += OneWord) {
                // Resolve AdvancedOrder calldata offset, use it to decode and
                // copy from calldata, and write resultant memory offset.
                mPtrHead.offset(offset).write(
                    _decodeAdvancedOrder(cdPtrHead.pptrOffset(offset))
                );
            }
        }
    }
    /**
     * @dev Takes a calldata pointer to a Fulfillment struct and copies the
     *      decoded struct to memory.
     *
     * @param cdPtr A calldata pointer for the Fulfillment struct.
     *
     * @return mPtr A memory pointer to the Fulfillment struct head.
     */
    function _decodeFulfillment(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate required memory for the Fulfillment head (the fulfillment
        // components arrays are allocated independently).
        mPtr = malloc(Fulfillment_head_size);
        // Resolve offerComponents calldata offset, use it to decode and copy
        // from calldata, and write resultant memory offset to head in memory.
        mPtr.write(_decodeFulfillmentComponents(cdPtr.pptr()));
        // Resolve considerationComponents calldata offset, use it to decode and
        // copy from calldata, and write resultant memory offset to memory head.
        mPtr.offset(Fulfillment_considerationComponents_offset).write(
            _decodeFulfillmentComponents(
                cdPtr.pptrOffset(Fulfillment_considerationComponents_offset)
            )
        );
    }
    /**
     * @dev Takes an array of fulfillments from calldata and copies it into
     *      memory.
     *
     * @param cdPtrLength A calldata pointer to the start of the fulfillments
     *                    array in calldata which contains the length of the
     *                    array.
     *
     * @return mPtrLength A memory pointer to the start of the fulfillments
     *                    array in memory which contains the length of the
     *                    array.
     */
    function _decodeFulfillments(
        CalldataPointer cdPtrLength
    ) internal pure returns (MemoryPointer mPtrLength) {
        // Retrieve length of array, masking to prevent potential overflow.
        uint256 arrLength = cdPtrLength.readMaskedUint256();
        unchecked {
            // Derive offset to the tail based on one word per array element.
            uint256 tailOffset = arrLength << OneWordShift;
            // Add one additional word for the length and allocate memory.
            mPtrLength = malloc(tailOffset + OneWord);
            // Write the length of the array to memory.
            mPtrLength.write(arrLength);
            // Advance to first memory & calldata pointers (e.g. after length).
            MemoryPointer mPtrHead = mPtrLength.next();
            CalldataPointer cdPtrHead = cdPtrLength.next();
            // Iterate over each pointer, word by word, until tail is reached.
            for (uint256 offset = 0; offset < tailOffset; offset += OneWord) {
                // Resolve Fulfillment calldata offset, use it to decode and
                // copy from calldata, and write resultant memory offset.
                mPtrHead.offset(offset).write(
                    _decodeFulfillment(cdPtrHead.pptrOffset(offset))
                );
            }
        }
    }
    /**
     * @dev Takes a calldata pointer to an OrderComponents struct and copies the
     *      decoded struct to memory as an OrderParameters struct (with the
     *      totalOriginalConsiderationItems value set equal to the length of the
     *      supplied consideration array).
     *
     * @param cdPtr A calldata pointer for the OrderComponents struct.
     *
     * @return mPtr A memory pointer to the OrderParameters struct head.
     */
    function _decodeOrderComponentsAsOrderParameters(
        CalldataPointer cdPtr
    ) internal pure returns (MemoryPointer mPtr) {
        // Allocate memory for the OrderParameters head.
        mPtr = malloc(OrderParameters_head_size);
        // Copy the full OrderComponents head from calldata to memory.
        cdPtr.copy(mPtr, OrderComponents_OrderParameters_common_head_size);
        // Resolve the offer calldata offset, use that to decode and copy offer
        // from calldata, and write resultant memory offset to head in memory.
        mPtr.offset(OrderParameters_offer_head_offset).write(
            _decodeOffer(cdPtr.pptrOffset(OrderParameters_offer_head_offset))
        );
        // Resolve consideration calldata offset, use that to copy consideration
        // from calldata, and write resultant memory offset to head in memory.
        MemoryPointer consideration = _decodeConsideration(
            cdPtr.pptrOffset(OrderParameters_consideration_head_offset)
        );
        mPtr.offset(OrderParameters_consideration_head_offset).write(
            consideration
        );
        // Write masked consideration length to totalOriginalConsiderationItems.
        mPtr
            .offset(OrderParameters_totalOriginalConsiderationItems_offset)
            .write(consideration.readUint256());
    }
    /**
     * @dev Decodes the returndata from a call to generateOrder, or returns
     *      empty arrays and a boolean signifying that the returndata does not
     *      adhere to a valid encoding scheme if it cannot be decoded. Note
     *      that this function expects that original offer and consideration
     *      item arrays have been modified and repurposed to resemble spent
     *      and received item arrays; specifically, the recipient should be
     *      in the endAmount location on consideration items and the derived
     *      amount should be in the startAmount location for both item types.
     *
     * @return invalidEncoding A boolean signifying whether the returndata has
     *                         an invalid encoding.
     * @return offer           The decoded offer array.
     * @return consideration   The decoded consideration array.
     */
    function _decodeGenerateOrderReturndata(
        MemoryPointer originalOffer,
        MemoryPointer originalConsideration
    )
        internal
        pure
        returns (
            uint256 invalidEncoding,
            MemoryPointer offer,
            MemoryPointer consideration
        )
    {
        assembly {
            // Check that returndatasize is at least three words:
            // 1. offerOffset
            // 2. considerationOffset
            // 3. offerLength & considerationLength might occupy just one word
            //    if offerOffset & considerationOffset would point to the same
            //    offset and the arrays have length 0.
            invalidEncoding := lt(returndatasize(), ThreeWords)
            let offsetOffer
            let offsetConsideration
            let offerLength
            let considerationLength
            // Proceed if enough returndata is present to continue evaluation.
            if iszero(invalidEncoding) {
                // Copy first two words of returndata (the offsets to offer and
                // consideration array lengths) to scratch space.
                returndatacopy(0, 0, TwoWords)
                offsetOffer := mload(0)
                offsetConsideration := mload(OneWord)
                // If valid length, check that offsets word boundaries are
                // within returndata.
                let invalidOfferOffset := gt(
                    add(offsetOffer, OneWord),
                    returndatasize()
                )
                let invalidConsiderationOffset := gt(
                    add(offsetConsideration, OneWord),
                    returndatasize()
                )
                // Only proceed if length (and thus encoding) is valid so far.
                invalidEncoding := or(
                    invalidOfferOffset,
                    invalidConsiderationOffset
                )
                if iszero(invalidEncoding) {
                    // Copy length of offer array to scratch space.
                    returndatacopy(0, offsetOffer, OneWord)
                    offerLength := mload(0)
                    // Copy length of consideration array to scratch space.
                    returndatacopy(OneWord, offsetConsideration, OneWord)
                    considerationLength := mload(OneWord)
                    {
                        // Derive end offsets for offer & consideration arrays.
                        let offerEndOffset := add(
                            add(offsetOffer, OneWord),
                            shl(SpentItem_size_shift, offerLength)
                        )
                        let considerationEndOffset := add(
                            add(offsetConsideration, OneWord),
                            mul(ReceivedItem_size, considerationLength)
                        )
                        // Don't continue if either offer or consideration
                        // length exceeds 65535 or if returndatasize is less
                        // than the end offsets.
                        invalidEncoding := or(
                            gt(
                                or(offerLength, considerationLength),
                                generateOrder_maximum_returned_array_length
                            ),
                            or(
                                lt(returndatasize(), offerEndOffset),
                                lt(returndatasize(), considerationEndOffset)
                            )
                        )
                        // Set first word of scratch space to 0 so length of
                        // offer/consideration are set to 0 on invalid encoding.
                        mstore(0, 0)
                    }
                }
            }
            if iszero(invalidEncoding) {
                let invalidSpentItems, invalidReceivedItems
                offer, invalidSpentItems := copySpentItemsAsOfferItems(
                    originalOffer,
                    add(offsetOffer, OneWord),
                    offerLength
                )
                consideration, invalidReceivedItems :=
                    copyReceivedItemsAsConsiderationItems(
                        originalConsideration,
                        add(offsetConsideration, OneWord),
                        considerationLength
                    )
                invalidEncoding := or(invalidSpentItems, invalidReceivedItems)
            }
            function copySpentItemsAsOfferItems(
                mPtrLengthOriginal,
                rdPtrHeadSpentItems,
                length
            ) -> mPtrLength, invalidSpentItems {
                // Retrieve the current free memory pointer.
                mPtrLength := mload(FreeMemoryPointerSlot)
                // Cache the original offer array length
                let originalOfferLength := mload(mPtrLengthOriginal)
                // Allocate memory for the new array.
                mstore(
                    FreeMemoryPointerSlot,
                    add(
                        mPtrLength,
                        add(
                            OneWord,
                            mul(length, OfferItem_size_with_head_pointer)
                        )
                    )
                )
                // Write the length of the array to the start of free memory.
                mstore(mPtrLength, length)
                // Use offset from length to minimize stack depth.
                let headOffsetFromLength := OneWord
                let headSizeWithLength := shl(OneWordShift, add(1, length))
                let mPtrTailNext := add(mPtrLength, headSizeWithLength)
                let mPtrTailOriginalNext := add(
                    mPtrLengthOriginal,
                    shl(OneWordShift, add(1, originalOfferLength))
                )
                let headSizeToCompareWithLength := shl(
                    OneWordShift,
                    add(1, min(length, originalOfferLength))
                )
                // Iterate over each new element with a corresponding original
                // item. For each original offer item, check that:
                // - There is a corresponding new spent item.
                // - The original and new items match with compareItems.
                // - The new offer item amount >= original amount.
                invalidSpentItems := gt(originalOfferLength, length)
                for {
                } lt(headOffsetFromLength, headSizeToCompareWithLength) {
                } {
                    // Write the memory pointer to the accompanying head offset.
                    mstore(add(mPtrLength, headOffsetFromLength), mPtrTailNext)
                    // Copy itemType, token, identifier and amount.
                    returndatacopy(
                        mPtrTailNext,
                        rdPtrHeadSpentItems,
                        SpentItem_size
                    )
                    let newAmount := mload(
                        add(mPtrTailNext, Common_amount_offset)
                    )
                    // Copy amount to endAmount.
                    mstore(
                        add(mPtrTailNext, Common_endAmount_offset),
                        newAmount
                    )
                    let originalAmount := mload(
                        add(mPtrTailOriginalNext, Common_amount_offset)
                    )
                    invalidSpentItems := or(
                        invalidSpentItems,
                        or(
                            compareItems(mPtrTailOriginalNext, mPtrTailNext),
                            gt(originalAmount, newAmount)
                        )
                    )
                    // Update read pointer, next tail pointer for new and
                    // original, and head offset.
                    rdPtrHeadSpentItems := add(
                        rdPtrHeadSpentItems,
                        SpentItem_size
                    )
                    mPtrTailNext := add(mPtrTailNext, OfferItem_size)
                    mPtrTailOriginalNext := add(
                        mPtrTailOriginalNext,
                        OfferItem_size
                    )
                    headOffsetFromLength := add(headOffsetFromLength, OneWord)
                }
                // Iterate over each element without corresponding original item
                for {
                } lt(headOffsetFromLength, headSizeWithLength) {
                } {
                    // Write the memory pointer to the accompanying head offset.
                    mstore(add(mPtrLength, headOffsetFromLength), mPtrTailNext)
                    // Copy itemType, token, identifier and amount.
                    returndatacopy(
                        mPtrTailNext,
                        rdPtrHeadSpentItems,
                        SpentItem_size
                    )
                    // Copy amount to endAmount.
                    mstore(
                        add(mPtrTailNext, Common_endAmount_offset),
                        mload(add(mPtrTailNext, Common_amount_offset))
                    )
                    // Update read pointer, next tail pointer, and head offset.
                    rdPtrHeadSpentItems := add(
                        rdPtrHeadSpentItems,
                        SpentItem_size
                    )
                    mPtrTailNext := add(mPtrTailNext, OfferItem_size)
                    headOffsetFromLength := add(headOffsetFromLength, OneWord)
                }
            }
            function copyReceivedItemsAsConsiderationItems(
                mPtrLengthOriginal,
                rdPtrHeadReceivedItems,
                length
            ) -> mPtrLength, invalidReceivedItems {
                // Retrieve the current free memory pointer.
                mPtrLength := mload(FreeMemoryPointerSlot)
                // Cache the original consideration array length
                let originalConsiderationLength := mload(mPtrLengthOriginal)
                // Ensure returned array length does not exceed original length.
                invalidReceivedItems := gt(length, originalConsiderationLength)
                // Derive the length of the new array in memory, capped by the
                // original consideration array length.
                let newLength := min(length, originalConsiderationLength)
                // Allocate memory for the array. Note that memory does not need
                // to be allocated for new elements without a corresponding
                // original item as the new array will be invalid if its length
                // exceeds the original array length.
                mstore(
                    FreeMemoryPointerSlot,
                    add(
                        mPtrLength,
                        add(
                            OneWord,
                            mul(
                                newLength,
                                ConsiderationItem_size_with_head_pointer
                            )
                        )
                    )
                )
                // Write the length of the array to the start of free memory.
                mstore(mPtrLength, newLength)
                // Use offset from length to minimize stack depth.
                let headOffsetFromLength := OneWord
                let mPtrTailNext := add(
                    mPtrLength,
                    shl(OneWordShift, add(1, newLength))
                )
                let mPtrTailOriginalNext := add(
                    mPtrLengthOriginal,
                    shl(OneWordShift, add(1, originalConsiderationLength))
                )
                let headSizeToCompareWithLength := shl(
                    OneWordShift,
                    add(1, newLength)
                )
                // Iterate over each new element with a corresponding original
                // item. For each new received item, check that:
                // - The new & original items match according to compareItems.
                // - The new consideration item amount <= the original amount.
                // - The items have the same recipient if original != null.
                for {
                } lt(headOffsetFromLength, headSizeToCompareWithLength) {
                } {
                    // Write the memory pointer to the accompanying head offset.
                    mstore(add(mPtrLength, headOffsetFromLength), mPtrTailNext)
                    // Copy itemType, token, identifier, amount and recipient.
                    returndatacopy(
                        mPtrTailNext,
                        rdPtrHeadReceivedItems,
                        ReceivedItem_size
                    )
                    // Copy amount to consideration item's recipient offset.
                    returndatacopy(
                        add(mPtrTailNext, ConsiderationItem_recipient_offset),
                        add(rdPtrHeadReceivedItems, Common_amount_offset),
                        OneWord
                    )
                    // Retrieve both the new and original item amounts.
                    let newAmount := mload(
                        add(mPtrTailNext, Common_amount_offset)
                    )
                    let originalAmount := mload(
                        add(mPtrTailOriginalNext, Common_amount_offset)
                    )
                    // Compare items' item type, token, and identifier, ensure
                    // they have the same recipient and that the new amount is
                    // less than or equal to the original amount. The original
                    // recipient must already be present at the ReceivedItem
                    // recipient offset rather than at the initial
                    // ConsiderationItem recipient offset.
                    invalidReceivedItems := or(
                        invalidReceivedItems,
                        or(
                            compareItems(mPtrTailOriginalNext, mPtrTailNext),
                            or(
                                gt(newAmount, originalAmount),
                                checkRecipients(
                                    mload(
                                        add(
                                            mPtrTailOriginalNext,
                                            ReceivedItem_recipient_offset
                                        )
                                    ),
                                    mload(
                                        add(
                                            mPtrTailNext,
                                            ReceivedItem_recipient_offset
                                        )
                                    )
                                )
                            )
                        )
                    )
                    // Update read pointer, next tail pointer, and head offset.
                    rdPtrHeadReceivedItems := add(
                        rdPtrHeadReceivedItems,
                        ReceivedItem_size
                    )
                    mPtrTailNext := add(mPtrTailNext, ConsiderationItem_size)
                    mPtrTailOriginalNext := add(
                        mPtrTailOriginalNext,
                        ConsiderationItem_size
                    )
                    headOffsetFromLength := add(headOffsetFromLength, OneWord)
                }
                // Note: skip copying new elements without a corresponding
                // original item as the new array will be invalid if its length
                // exceeds the original array length.
            }
            /**
             * @dev Yul function to check the compatibility of two offer or
             *      consideration items for contract orders.  Note that the
             *      itemType and identifier are reset in cases where criteria is
             *      equal to 0 (collection-wide or "wildcard" items), which
             *      means that a contract offerer has full latitude to choose
             *      any identifier it wants mid-flight, in contrast to the usual
             *      behavior, where the fulfiller can pick which identifier to
             *      receive by providing a CriteriaResolver.
             *
             * @param originalItem The original offer or consideration item.
             * @param newItem      The new offer or consideration item.
             *
             * @return isInvalid Error buffer indicating whether or not the
             *                   items are incompatible.
             */
            function compareItems(originalItem, newItem) -> isInvalid {
                let itemType := mload(originalItem)
                let identifier := mload(
                    add(originalItem, Common_identifier_offset)
                )
                // Use returned identifier for criteria-based items with a
                // criteria value of 0 (collection-wide or "wildcard" items).
                if and(gt(itemType, 3), iszero(identifier)) {
                    // Replace item type with non-criteria equivalent.
                    itemType := sub(itemType, 2)
                    // Replace identifier with the returned identifier.
                    identifier := mload(add(newItem, Common_identifier_offset))
                }
                isInvalid := iszero(
                    and(
                        // originalItem.token == newItem.token &&
                        // originalItem.itemType == newItem.itemType
                        and(
                            eq(
                                mload(add(originalItem, Common_token_offset)),
                                mload(add(newItem, Common_token_offset))
                            ),
                            eq(itemType, mload(newItem))
                        ),
                        // originalItem.identifier == newItem.identifier
                        eq(
                            identifier,
                            mload(add(newItem, Common_identifier_offset))
                        )
                    )
                )
            }
            /**
             * @dev Internal pure function to check the compatibility of two
             *      recipients on consideration items for contract orders. This
             *      check is skipped if no recipient is originally supplied.
             *
             * @param originalRecipient The original consideration item
             *                          recipient.
             * @param newRecipient      The new consideration item recipient.
             *
             * @return isInvalid Error buffer indicating whether or not the
             *                   two recipients are incompatible.
             */
            function checkRecipients(originalRecipient, newRecipient)
                -> isInvalid
            {
                isInvalid := iszero(
                    or(
                        iszero(originalRecipient),
                        eq(newRecipient, originalRecipient)
                    )
                )
            }
            function min(a, b) -> c {
                c := add(b, mul(lt(a, b), sub(a, b)))
            }
        }
    }
    /**
     * @dev Converts a function returning _decodeGenerateOrderReturndata types
     *      into a function returning offer and consideration types.
     *
     * @param inFn The input function, taking no arguments and returning an
     *             error buffer, spent item array, and received item array.
     *
     * @return outFn The output function, taking no arguments and returning an
     *               error buffer, offer array, and consideration array.
     */
    function _convertGetGeneratedOrderResult(
        function(MemoryPointer, MemoryPointer)
            internal
            pure
            returns (uint256, MemoryPointer, MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(OfferItem[] memory, ConsiderationItem[] memory)
                internal
                pure
                returns (
                    uint256,
                    OfferItem[] memory,
                    ConsiderationItem[] memory
                ) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking ReceivedItem, address, bytes32, and bytes
     *      types (e.g. the _transfer function) into a function taking
     *      OfferItem, address, bytes32, and bytes types.
     *
     * @param inFn The input function, taking ReceivedItem, address, bytes32,
     *             and bytes types (e.g. the _transfer function).
     *
     * @return outFn The output function, taking OfferItem, address, bytes32,
     *               and bytes types.
     */
    function _toOfferItemInput(
        function(ReceivedItem memory, address, bytes32, bytes memory)
            internal inFn
    )
        internal
        pure
        returns (
            function(OfferItem memory, address, bytes32, bytes memory)
                internal outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking ReceivedItem, address, bytes32, and bytes
     *      types (e.g. the _transfer function) into a function taking
     *      ConsiderationItem, address, bytes32, and bytes types.
     *
     * @param inFn The input function, taking ReceivedItem, address, bytes32,
     *             and bytes types (e.g. the _transfer function).
     *
     * @return outFn The output function, taking ConsiderationItem, address,
     *               bytes32, and bytes types.
     */
    function _toConsiderationItemInput(
        function(ReceivedItem memory, address, bytes32, bytes memory)
            internal inFn
    )
        internal
        pure
        returns (
            function(ConsiderationItem memory, address, bytes32, bytes memory)
                internal outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      a bytes type.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning a bytes type.
     */
    function _toBytesReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer) internal pure returns (bytes memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      an OrderParameters type.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning an OrderParameters type.
     */
    function _toOrderParametersReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (OrderParameters memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      an AdvancedOrder type.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning an AdvancedOrder type.
     */
    function _toAdvancedOrderReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (AdvancedOrder memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      a dynamic array of CriteriaResolver types.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning a dynamic array of CriteriaResolver types.
     */
    function _toCriteriaResolversReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (CriteriaResolver[] memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      a dynamic array of Order types.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning a dynamic array of Order types.
     */
    function _toOrdersReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (Order[] memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      a nested dynamic array of dynamic arrays of FulfillmentComponent
     *      types.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning a nested dynamic array of dynamic arrays of
     *               FulfillmentComponent types.
     */
    function _toNestedFulfillmentComponentsReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (FulfillmentComponent[][] memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      a dynamic array of AdvancedOrder types.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning a dynamic array of AdvancedOrder types.
     */
    function _toAdvancedOrdersReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (AdvancedOrder[] memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Converts a function taking a calldata pointer and returning a memory
     *      pointer into a function taking that calldata pointer and returning
     *      a dynamic array of Fulfillment types.
     *
     * @param inFn The input function, taking an arbitrary calldata pointer and
     *             returning an arbitrary memory pointer.
     *
     * @return outFn The output function, taking an arbitrary calldata pointer
     *               and returning a dynamic array of Fulfillment types.
     */
    function _toFulfillmentsReturnType(
        function(CalldataPointer) internal pure returns (MemoryPointer) inFn
    )
        internal
        pure
        returns (
            function(CalldataPointer)
                internal
                pure
                returns (Fulfillment[] memory) outFn
        )
    {
        assembly {
            outFn := inFn
        }
    }
    /**
     * @dev Caches the endAmount in an offer item and replaces it with
     * a given recipient so that its memory may be reused as a temporary
     * ReceivedItem.
     *
     * @param offerItem The offer item.
     * @param recipient The recipient.
     *
     * @return originalEndAmount The original end amount.
     */
    function _replaceEndAmountWithRecipient(
        OfferItem memory offerItem,
        address recipient
    ) internal pure returns (uint256 originalEndAmount) {
        assembly {
            // Derive the pointer to the end amount on the offer item.
            let endAmountPtr := add(offerItem, ReceivedItem_recipient_offset)
            // Retrieve the value of the end amount on the offer item.
            originalEndAmount := mload(endAmountPtr)
            // Write recipient to received item at the offer end amount pointer.
            mstore(endAmountPtr, recipient)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
/**
 * @title ReentrancyErrors
 * @author 0age
 * @notice ReentrancyErrors contains errors related to reentrancy.
 */
interface ReentrancyErrors {
    /**
     * @dev Revert with an error when a caller attempts to reenter a protected
     *      function.
     */
    error NoReentrantCalls();
    /**
     * @dev Revert with an error when attempting to activate the TSTORE opcode
     *      when it is already active.
     */
    error TStoreAlreadyActivated();
    /**
     * @dev Revert with an error when attempting to activate the TSTORE opcode
     *      in an EVM environment that does not support it.
     */
    error TStoreNotSupported();
    /**
     * @dev Revert with an error when deployment of the contract for testing
     *      TSTORE support fails.
     */
    error TloadTestContractDeploymentFailed();
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.10;
import './TransferHelper.sol';
import './ERC20Interface.sol';
import './IForwarder.sol';
/** ERC721, ERC1155 imports */
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol';
/**
 *
 * WalletSimple
 * ============
 *
 * Basic multi-signer wallet designed for use in a co-signing environment where 2 signatures are required to move funds.
 * Typically used in a 2-of-3 signing configuration. Uses ecrecover to allow for 2 signatures in a single transaction.
 *
 * The first signature is created on the operation hash (see Data Formats) and passed to sendMultiSig/sendMultiSigToken
 * The signer is determined by verifyMultiSig().
 *
 * The second signature is created by the submitter of the transaction and determined by msg.signer.
 *
 * Data Formats
 * ============
 *
 * The signature is created with ethereumjs-util.ecsign(operationHash).
 * Like the eth_sign RPC call, it packs the values as a 65-byte array of [r, s, v].
 * Unlike eth_sign, the message is not prefixed.
 *
 * The operationHash the result of keccak256(prefix, toAddress, value, data, expireTime).
 * For ether transactions, `prefix` is "ETHER".
 * For token transaction, `prefix` is "ERC20" and `data` is the tokenContractAddress.
 *
 *
 */
contract WalletSimple is IERC721Receiver, ERC1155Receiver {
  // Events
  event Deposited(address from, uint256 value, bytes data);
  event SafeModeActivated(address msgSender);
  event Transacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation, // Operation hash (see Data Formats)
    address toAddress, // The address the transaction was sent to
    uint256 value, // Amount of Wei sent to the address
    bytes data // Data sent when invoking the transaction
  );
  event BatchTransfer(address sender, address recipient, uint256 value);
  // this event shows the other signer and the operation hash that they signed
  // specific batch transfer events are emitted in Batcher
  event BatchTransacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation // Operation hash (see Data Formats)
  );
  // Public fields
  mapping(address => bool) public signers; // The addresses that can co-sign transactions on the wallet
  bool public safeMode = false; // When active, wallet may only send to signer addresses
  bool public initialized = false; // True if the contract has been initialized
  // Internal fields
  uint256 private constant MAX_SEQUENCE_ID_INCREASE = 10000;
  uint256 constant SEQUENCE_ID_WINDOW_SIZE = 10;
  uint256[SEQUENCE_ID_WINDOW_SIZE] recentSequenceIds;
  /**
   * Set up a simple multi-sig wallet by specifying the signers allowed to be used on this wallet.
   * 2 signers will be required to send a transaction from this wallet.
   * Note: The sender is NOT automatically added to the list of signers.
   * Signers CANNOT be changed once they are set
   *
   * @param allowedSigners An array of signers on the wallet
   */
  function init(address[] calldata allowedSigners) external onlyUninitialized {
    require(allowedSigners.length == 3, 'Invalid number of signers');
    for (uint8 i = 0; i < allowedSigners.length; i++) {
      require(allowedSigners[i] != address(0), 'Invalid signer');
      signers[allowedSigners[i]] = true;
    }
    initialized = true;
  }
  /**
   * Get the network identifier that signers must sign over
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER';
  }
  /**
   * Get the network identifier that signers must sign over for token transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getTokenNetworkId() internal virtual pure returns (string memory) {
    return 'ERC20';
  }
  /**
   * Get the network identifier that signers must sign over for batch transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getBatchNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER-Batch';
  }
  /**
   * Determine if an address is a signer on this wallet
   * @param signer address to check
   * returns boolean indicating whether address is signer or not
   */
  function isSigner(address signer) public view returns (bool) {
    return signers[signer];
  }
  /**
   * Modifier that will execute internal code block only if the sender is an authorized signer on this wallet
   */
  modifier onlySigner {
    require(isSigner(msg.sender), 'Non-signer in onlySigner method');
    _;
  }
  /**
   * Modifier that will execute internal code block only if the contract has not been initialized yet
   */
  modifier onlyUninitialized {
    require(!initialized, 'Contract already initialized');
    _;
  }
  /**
   * Gets called when a transaction is received with data that does not match any other method
   */
  fallback() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      emit Deposited(msg.sender, msg.value, msg.data);
    }
  }
  /**
   * Gets called when a transaction is received with ether and no data
   */
  receive() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      // message data is always empty for receive. If there is data it is sent to fallback function.
      emit Deposited(msg.sender, msg.value, '');
    }
  }
  /**
   * Execute a multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in Wei to be sent
   * @param data the data to send to the toAddress when invoking the transaction
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSig(
    address toAddress,
    uint256 value,
    bytes calldata data,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getNetworkId(),
        toAddress,
        value,
        data,
        expireTime,
        sequenceId
      )
    );
    address otherSigner = verifyMultiSig(
      toAddress,
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    // Success, send the transaction
    (bool success, ) = toAddress.call{ value: value }(data);
    require(success, 'Call execution failed');
    emit Transacted(
      msg.sender,
      otherSigner,
      operationHash,
      toAddress,
      value,
      data
    );
  }
  /**
   * Execute a batched multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   * The recipients and values to send are encoded in two arrays, where for index i, recipients[i] will be sent values[i].
   *
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigBatch(
    address[] calldata recipients,
    uint256[] calldata values,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    require(recipients.length != 0, 'Not enough recipients');
    require(
      recipients.length == values.length,
      'Unequal recipients and values'
    );
    require(recipients.length < 256, 'Too many recipients, max 255');
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getBatchNetworkId(),
        recipients,
        values,
        expireTime,
        sequenceId
      )
    );
    // the first parameter (toAddress) is used to ensure transactions in safe mode only go to a signer
    // if in safe mode, we should use normal sendMultiSig to recover, so this check will always fail if in safe mode
    require(!safeMode, 'Batch in safe mode');
    address otherSigner = verifyMultiSig(
      address(0x0),
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    batchTransfer(recipients, values);
    emit BatchTransacted(msg.sender, otherSigner, operationHash);
  }
  /**
   * Transfer funds in a batch to each of recipients
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to recipients.
   *  The recipient with index i in recipients array will be sent values[i].
   *  Thus, recipients and values must be the same length
   */
  function batchTransfer(
    address[] calldata recipients,
    uint256[] calldata values
  ) internal {
    for (uint256 i = 0; i < recipients.length; i++) {
      require(address(this).balance >= values[i], 'Insufficient funds');
      (bool success, ) = recipients[i].call{ value: values[i] }('');
      require(success, 'Call failed');
      emit BatchTransfer(msg.sender, recipients[i], values[i]);
    }
  }
  /**
   * Execute a multi-signature token transfer from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in tokens to be sent
   * @param tokenContractAddress the address of the erc20 token contract
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigToken(
    address toAddress,
    uint256 value,
    address tokenContractAddress,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getTokenNetworkId(),
        toAddress,
        value,
        tokenContractAddress,
        expireTime,
        sequenceId
      )
    );
    verifyMultiSig(toAddress, operationHash, signature, expireTime, sequenceId);
    TransferHelper.safeTransfer(tokenContractAddress, toAddress, value);
  }
  /**
   * Execute a token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushTokens(tokenContractAddress);
  }
  /**
   * Execute a ERC721 token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushERC721ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC721Token(tokenContractAddress, tokenId);
  }
  /**
   * Execute a ERC1155 batch token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   */
  function batchFlushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.batchFlushERC1155Tokens(tokenContractAddress, tokenIds);
  }
  /**
   * Execute a ERC1155 token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   * @param tokenId the token id associated with the ERC1155
   */
  function flushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC1155Tokens(tokenContractAddress, tokenId);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush721(autoFlush);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush1155(autoFlush);
  }
  /**
   * Do common multisig verification for both eth sends and erc20token transfers
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * returns address that has created the signature
   */
  function verifyMultiSig(
    address toAddress,
    bytes32 operationHash,
    bytes calldata signature,
    uint256 expireTime,
    uint256 sequenceId
  ) private returns (address) {
    address otherSigner = recoverAddressFromSignature(operationHash, signature);
    // Verify if we are in safe mode. In safe mode, the wallet can only send to signers
    require(!safeMode || isSigner(toAddress), 'External transfer in safe mode');
    // Verify that the transaction has not expired
    require(expireTime >= block.timestamp, 'Transaction expired');
    // Try to insert the sequence ID. Will revert if the sequence id was invalid
    tryInsertSequenceId(sequenceId);
    require(isSigner(otherSigner), 'Invalid signer');
    require(otherSigner != msg.sender, 'Signers cannot be equal');
    return otherSigner;
  }
  /**
   * ERC721 standard callback function for when a ERC721 is transfered.
   *
   * @param _operator The address of the nft contract
   * @param _from The address of the sender
   * @param _tokenId The token id of the nft
   * @param _data Additional data with no specified format, sent in call to `_to`
   */
  function onERC721Received(
    address _operator,
    address _from,
    uint256 _tokenId,
    bytes memory _data
  ) external virtual override returns (bytes4) {
    return this.onERC721Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155Received(
    address _operator,
    address _from,
    uint256 id,
    uint256 value,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155BatchReceived(
    address _operator,
    address _from,
    uint256[] calldata ids,
    uint256[] calldata values,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155BatchReceived.selector;
  }
  /**
   * Irrevocably puts contract into safe mode. When in this mode, transactions may only be sent to signing addresses.
   */
  function activateSafeMode() external onlySigner {
    safeMode = true;
    emit SafeModeActivated(msg.sender);
  }
  /**
   * Gets signer's address using ecrecover
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * returns address recovered from the signature
   */
  function recoverAddressFromSignature(
    bytes32 operationHash,
    bytes memory signature
  ) private pure returns (address) {
    require(signature.length == 65, 'Invalid signature - wrong length');
    // We need to unpack the signature, which is given as an array of 65 bytes (like eth.sign)
    bytes32 r;
    bytes32 s;
    uint8 v;
    // solhint-disable-next-line
    assembly {
      r := mload(add(signature, 32))
      s := mload(add(signature, 64))
      v := and(mload(add(signature, 65)), 255)
    }
    if (v < 27) {
      v += 27; // Ethereum versions are 27 or 28 as opposed to 0 or 1 which is submitted by some signing libs
    }
    // protect against signature malleability
    // S value must be in the lower half orader
    // reference: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/051d340171a93a3d401aaaea46b4b62fa81e5d7c/contracts/cryptography/ECDSA.sol#L53
    require(
      uint256(s) <=
        0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
      "ECDSA: invalid signature 's' value"
    );
    // note that this returns 0 if the signature is invalid
    // Since 0x0 can never be a signer, when the recovered signer address
    // is checked against our signer list, that 0x0 will cause an invalid signer failure
    return ecrecover(operationHash, v, r, s);
  }
  /**
   * Verify that the sequence id has not been used before and inserts it. Throws if the sequence ID was not accepted.
   * We collect a window of up to 10 recent sequence ids, and allow any sequence id that is not in the window and
   * greater than the minimum element in the window.
   * @param sequenceId to insert into array of stored ids
   */
  function tryInsertSequenceId(uint256 sequenceId) private onlySigner {
    // Keep a pointer to the lowest value element in the window
    uint256 lowestValueIndex = 0;
    // fetch recentSequenceIds into memory for function context to avoid unnecessary sloads
      uint256[SEQUENCE_ID_WINDOW_SIZE] memory _recentSequenceIds
     = recentSequenceIds;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      require(_recentSequenceIds[i] != sequenceId, 'Sequence ID already used');
      if (_recentSequenceIds[i] < _recentSequenceIds[lowestValueIndex]) {
        lowestValueIndex = i;
      }
    }
    // The sequence ID being used is lower than the lowest value in the window
    // so we cannot accept it as it may have been used before
    require(
      sequenceId > _recentSequenceIds[lowestValueIndex],
      'Sequence ID below window'
    );
    // Block sequence IDs which are much higher than the lowest value
    // This prevents people blocking the contract by using very large sequence IDs quickly
    require(
      sequenceId <=
        (_recentSequenceIds[lowestValueIndex] + MAX_SEQUENCE_ID_INCREASE),
      'Sequence ID above maximum'
    );
    recentSequenceIds[lowestValueIndex] = sequenceId;
  }
  /**
   * Gets the next available sequence ID for signing when using executeAndConfirm
   * returns the sequenceId one higher than the highest currently stored
   */
  function getNextSequenceId() external view returns (uint256) {
    uint256 highestSequenceId = 0;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      if (recentSequenceIds[i] > highestSequenceId) {
        highestSequenceId = recentSequenceIds[i];
      }
    }
    return highestSequenceId + 1;
  }
}
// SPDX-License-Identifier: GPL-3.0-or-later
// source: https://github.com/Uniswap/solidity-lib/blob/master/contracts/libraries/TransferHelper.sol
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/Address.sol';
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
  function safeTransfer(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transfer(address,uint256)')));
    (bool success, bytes memory data) = token.call(
      abi.encodeWithSelector(0xa9059cbb, to, value)
    );
    require(
      success && (data.length == 0 || abi.decode(data, (bool))),
      'TransferHelper::safeTransfer: transfer failed'
    );
  }
  function safeTransferFrom(
    address token,
    address from,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
    (bool success, bytes memory returndata) = token.call(
      abi.encodeWithSelector(0x23b872dd, from, to, value)
    );
    Address.verifyCallResult(
      success,
      returndata,
      'TransferHelper::transferFrom: transferFrom failed'
    );
  }
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.10;
/**
 * Contract that exposes the needed erc20 token functions
 */
abstract contract ERC20Interface {
  // Send _value amount of tokens to address _to
  function transfer(address _to, uint256 _value)
    public
    virtual
    returns (bool success);
  // Get the account balance of another account with address _owner
  function balanceOf(address _owner)
    public
    virtual
    view
    returns (uint256 balance);
}
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
interface IForwarder is IERC165 {
  /**
   * Sets the autoflush721 parameter.
   *
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(bool autoFlush) external;
  /**
   * Sets the autoflush1155 parameter.
   *
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(bool autoFlush) external;
  /**
   * Execute a token transfer of the full balance from the forwarder token to the parent address
   *
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushTokens(address tokenContractAddress) external;
  /**
   * Execute a nft transfer from the forwarder to the parent address
   *
   * @param tokenContractAddress the address of the ERC721 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC721Token(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC1155Tokens(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a batch nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenIds The token ids of the nfts
   */
  function batchFlushERC1155Tokens(
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../IERC1155Receiver.sol";
import "../../../utils/introspection/ERC165.sol";
/**
 * @dev _Available since v3.1._
 */
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import { PayableProxyInterface } from "../interfaces/PayableProxyInterface.sol";
interface IUpgradeBeacon {
    /**
     * @notice An external view function that returns the implementation.
     *
     * @return The address of the implementation.
     */
    function implementation() external view returns (address);
}
/**
 * @title   PayableProxy
 * @author  OpenSea Protocol Team
 * @notice  PayableProxy is a beacon proxy which will immediately return if
 *          called with callvalue. Otherwise, it will delegatecall the beacon
 *          implementation.
 */
contract PayableProxy is PayableProxyInterface {
    // Address of the beacon.
    address private immutable _beacon;
    constructor(address beacon) payable {
        // Ensure the origin is an approved deployer.
        require(
            (tx.origin == address(0x939C8d89EBC11fA45e576215E2353673AD0bA18A) ||
                tx.origin ==
                address(0xe80a65eB7a3018DedA407e621Ef5fb5B416678CA) ||
                tx.origin ==
                address(0x86D26897267711ea4b173C8C124a0A73612001da) ||
                tx.origin ==
                address(0x3B52ad533687Ce908bA0485ac177C5fb42972962)),
            "Deployment must originate from an approved deployer."
        );
        // Set the initial beacon.
        _beacon = beacon;
    }
    function initialize(address ownerToSet) external {
        // Ensure the origin is an approved deployer.
        require(
            (tx.origin == address(0x939C8d89EBC11fA45e576215E2353673AD0bA18A) ||
                tx.origin ==
                address(0xe80a65eB7a3018DedA407e621Ef5fb5B416678CA) ||
                tx.origin ==
                address(0x86D26897267711ea4b173C8C124a0A73612001da) ||
                tx.origin ==
                address(0x3B52ad533687Ce908bA0485ac177C5fb42972962)),
            "Initialize must originate from an approved deployer."
        );
        // Get the implementation address from the provided beacon.
        address implementation = IUpgradeBeacon(_beacon).implementation();
        // Create the initializationCalldata from the provided parameters.
        bytes memory initializationCalldata = abi.encodeWithSignature(
            "initialize(address)",
            ownerToSet
        );
        // Delegatecall into the implementation, supplying initialization
        // calldata.
        (bool ok, ) = implementation.delegatecall(initializationCalldata);
        // Revert and include revert data if delegatecall to implementation
        // reverts.
        if (!ok) {
            assembly {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }
        }
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by
     *      `_implementation()`. Will run if no other function in the contract
     *      matches the call data.
     */
    fallback() external payable override {
        _fallback();
    }
    /**
     * @dev Internal fallback function that delegates calls to the address
     *      returned by `_implementation()`. Will run if no other function
     *      in the contract matches the call data.
     */
    function _fallback() internal {
        // Delegate if call value is zero.
        if (msg.value == 0) {
            _delegate(_implementation());
        }
    }
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will
     * return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this
            // inline assembly block because it will not return to
            // Solidity code. We overwrite the Solidity scratch pad
            // at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(
                gas(),
                implementation,
                0,
                calldatasize(),
                0,
                0
            )
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This function returns the address to which the fallback function
     *      should delegate.
     */
    function _implementation() internal view returns (address) {
        return IUpgradeBeacon(_beacon).implementation();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
/**
 * @title   PayableProxyInterface
 * @author  OpenSea Protocol Team
 * @notice  PayableProxyInterface contains all external function interfaces
 *          for the payable proxy.
 */
interface PayableProxyInterface {
    /**
     * @dev Fallback function that delegates calls to the address returned by
     *      `_implementation()`. Will run if no other function in the contract
     *      matches the call data.
     */
    fallback() external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
import { ConduitInterface } from "../interfaces/ConduitInterface.sol";
import { ConduitItemType } from "./lib/ConduitEnums.sol";
import { TokenTransferrer } from "../lib/TokenTransferrer.sol";
// prettier-ignore
import {
    ConduitTransfer,
    ConduitBatch1155Transfer
} from "./lib/ConduitStructs.sol";
import "./lib/ConduitConstants.sol";
/**
 * @title Conduit
 * @author 0age
 * @notice This contract serves as an originator for "proxied" transfers. Each
 *         conduit is deployed and controlled by a "conduit controller" that can
 *         add and remove "channels" or contracts that can instruct the conduit
 *         to transfer approved ERC20/721/1155 tokens. *IMPORTANT NOTE: each
 *         conduit has an owner that can arbitrarily add or remove channels, and
 *         a malicious or negligent owner can add a channel that allows for any
 *         approved ERC20/721/1155 tokens to be taken immediately — be extremely
 *         cautious with what conduits you give token approvals to!*
 */
contract Conduit is ConduitInterface, TokenTransferrer {
    // Set deployer as an immutable controller that can update channel statuses.
    address private immutable _controller;
    // Track the status of each channel.
    mapping(address => bool) private _channels;
    /**
     * @notice Ensure that the caller is currently registered as an open channel
     *         on the conduit.
     */
    modifier onlyOpenChannel() {
        // Utilize assembly to access channel storage mapping directly.
        assembly {
            // Write the caller to scratch space.
            mstore(ChannelKey_channel_ptr, caller())
            // Write the storage slot for _channels to scratch space.
            mstore(ChannelKey_slot_ptr, _channels.slot)
            // Derive the position in storage of _channels[msg.sender]
            // and check if the stored value is zero.
            if iszero(
                sload(keccak256(ChannelKey_channel_ptr, ChannelKey_length))
            ) {
                // The caller is not an open channel; revert with
                // ChannelClosed(caller). First, set error signature in memory.
                mstore(ChannelClosed_error_ptr, ChannelClosed_error_signature)
                // Next, set the caller as the argument.
                mstore(ChannelClosed_channel_ptr, caller())
                // Finally, revert, returning full custom error with argument.
                revert(ChannelClosed_error_ptr, ChannelClosed_error_length)
            }
        }
        // Continue with function execution.
        _;
    }
    /**
     * @notice In the constructor, set the deployer as the controller.
     */
    constructor() {
        // Set the deployer as the controller.
        _controller = msg.sender;
    }
    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(ConduitTransfer[] calldata transfers)
        external
        override
        onlyOpenChannel
        returns (bytes4 magicValue)
    {
        // Retrieve the total number of transfers and place on the stack.
        uint256 totalStandardTransfers = transfers.length;
        // Iterate over each transfer.
        for (uint256 i = 0; i < totalStandardTransfers; ) {
            // Retrieve the transfer in question and perform the transfer.
            _transfer(transfers[i]);
            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                ++i;
            }
        }
        // Return a magic value indicating that the transfers were performed.
        magicValue = this.execute.selector;
    }
    /**
     * @notice Execute a sequence of batch 1155 item transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param batchTransfers The 1155 batch item transfers to perform.
     *
     * @return magicValue A magic value indicating that the item transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) external override onlyOpenChannel returns (bytes4 magicValue) {
        // Perform 1155 batch transfers. Note that memory should be considered
        // entirely corrupted from this point forward.
        _performERC1155BatchTransfers(batchTransfers);
        // Return a magic value indicating that the transfers were performed.
        magicValue = this.executeBatch1155.selector;
    }
    /**
     * @notice Execute a sequence of transfers, both single ERC20/721/1155 item
     *         transfers as well as batch 1155 item transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param standardTransfers The ERC20/721/1155 item transfers to perform.
     * @param batchTransfers    The 1155 batch item transfers to perform.
     *
     * @return magicValue A magic value indicating that the item transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) external override onlyOpenChannel returns (bytes4 magicValue) {
        // Retrieve the total number of transfers and place on the stack.
        uint256 totalStandardTransfers = standardTransfers.length;
        // Iterate over each standard transfer.
        for (uint256 i = 0; i < totalStandardTransfers; ) {
            // Retrieve the transfer in question and perform the transfer.
            _transfer(standardTransfers[i]);
            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                ++i;
            }
        }
        // Perform 1155 batch transfers. Note that memory should be considered
        // entirely corrupted from this point forward aside from the free memory
        // pointer having the default value.
        _performERC1155BatchTransfers(batchTransfers);
        // Return a magic value indicating that the transfers were performed.
        magicValue = this.executeWithBatch1155.selector;
    }
    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external override {
        // Ensure that the caller is the controller of this contract.
        if (msg.sender != _controller) {
            revert InvalidController();
        }
        // Ensure that the channel does not already have the indicated status.
        if (_channels[channel] == isOpen) {
            revert ChannelStatusAlreadySet(channel, isOpen);
        }
        // Update the status of the channel.
        _channels[channel] = isOpen;
        // Emit a corresponding event.
        emit ChannelUpdated(channel, isOpen);
    }
    /**
     * @dev Internal function to transfer a given ERC20/721/1155 item. Note that
     *      channels are expected to implement checks against transferring any
     *      zero-amount items if that constraint is desired.
     *
     * @param item The ERC20/721/1155 item to transfer.
     */
    function _transfer(ConduitTransfer calldata item) internal {
        // Determine the transfer method based on the respective item type.
        if (item.itemType == ConduitItemType.ERC20) {
            // Transfer ERC20 token. Note that item.identifier is ignored and
            // therefore ERC20 transfer items are potentially malleable — this
            // check should be performed by the calling channel if a constraint
            // on item malleability is desired.
            _performERC20Transfer(item.token, item.from, item.to, item.amount);
        } else if (item.itemType == ConduitItemType.ERC721) {
            // Ensure that exactly one 721 item is being transferred.
            if (item.amount != 1) {
                revert InvalidERC721TransferAmount();
            }
            // Transfer ERC721 token.
            _performERC721Transfer(
                item.token,
                item.from,
                item.to,
                item.identifier
            );
        } else if (item.itemType == ConduitItemType.ERC1155) {
            // Transfer ERC1155 token.
            _performERC1155Transfer(
                item.token,
                item.from,
                item.to,
                item.identifier,
                item.amount
            );
        } else {
            // Throw with an error.
            revert InvalidItemType();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
// prettier-ignore
import {
    ConduitTransfer,
    ConduitBatch1155Transfer
} from "../conduit/lib/ConduitStructs.sol";
/**
 * @title ConduitInterface
 * @author 0age
 * @notice ConduitInterface contains all external function interfaces, events,
 *         and errors for conduit contracts.
 */
interface ConduitInterface {
    /**
     * @dev Revert with an error when attempting to execute transfers using a
     *      caller that does not have an open channel.
     */
    error ChannelClosed(address channel);
    /**
     * @dev Revert with an error when attempting to update a channel to the
     *      current status of that channel.
     */
    error ChannelStatusAlreadySet(address channel, bool isOpen);
    /**
     * @dev Revert with an error when attempting to execute a transfer for an
     *      item that does not have an ERC20/721/1155 item type.
     */
    error InvalidItemType();
    /**
     * @dev Revert with an error when attempting to update the status of a
     *      channel from a caller that is not the conduit controller.
     */
    error InvalidController();
    /**
     * @dev Emit an event whenever a channel is opened or closed.
     *
     * @param channel The channel that has been updated.
     * @param open    A boolean indicating whether the conduit is open or not.
     */
    event ChannelUpdated(address indexed channel, bool open);
    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(ConduitTransfer[] calldata transfers)
        external
        returns (bytes4 magicValue);
    /**
     * @notice Execute a sequence of batch 1155 transfers. Only a caller with an
     *         open channel can call this function.
     *
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);
    /**
     * @notice Execute a sequence of transfers, both single and batch 1155. Only
     *         a caller with an open channel can call this function.
     *
     * @param standardTransfers  The ERC20/721/1155 transfers to perform.
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);
    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
enum ConduitItemType {
    NATIVE, // unused
    ERC20,
    ERC721,
    ERC1155
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
import "./TokenTransferrerConstants.sol";
// prettier-ignore
import {
    TokenTransferrerErrors
} from "../interfaces/TokenTransferrerErrors.sol";
import { ConduitBatch1155Transfer } from "../conduit/lib/ConduitStructs.sol";
/**
 * @title TokenTransferrer
 * @author 0age
 * @custom:coauthor d1ll0n
 * @custom:coauthor transmissions11
 * @notice TokenTransferrer is a library for performing optimized ERC20, ERC721,
 *         ERC1155, and batch ERC1155 transfers, used by both Seaport as well as
 *         by conduits deployed by the ConduitController. Use great caution when
 *         considering these functions for use in other codebases, as there are
 *         significant side effects and edge cases that need to be thoroughly
 *         understood and carefully addressed.
 */
contract TokenTransferrer is TokenTransferrerErrors {
    /**
     * @dev Internal function to transfer ERC20 tokens from a given originator
     *      to a given recipient. Sufficient approvals must be set on the
     *      contract performing the transfer.
     *
     * @param token      The ERC20 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC20Transfer(
        address token,
        address from,
        address to,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC20 token transfer.
        assembly {
            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)
            // Write call data into memory, starting with function selector.
            mstore(ERC20_transferFrom_sig_ptr, ERC20_transferFrom_signature)
            mstore(ERC20_transferFrom_from_ptr, from)
            mstore(ERC20_transferFrom_to_ptr, to)
            mstore(ERC20_transferFrom_amount_ptr, amount)
            // Make call & copy up to 32 bytes of return data to scratch space.
            // Scratch space does not need to be cleared ahead of time, as the
            // subsequent check will ensure that either at least a full word of
            // return data is received (in which case it will be overwritten) or
            // that no data is received (in which case scratch space will be
            // ignored) on a successful call to the given token.
            let callStatus := call(
                gas(),
                token,
                0,
                ERC20_transferFrom_sig_ptr,
                ERC20_transferFrom_length,
                0,
                OneWord
            )
            // Determine whether transfer was successful using status & result.
            let success := and(
                // Set success to whether the call reverted, if not check it
                // either returned exactly 1 (can't just be non-zero data), or
                // had no return data.
                or(
                    and(eq(mload(0), 1), gt(returndatasize(), 31)),
                    iszero(returndatasize())
                ),
                callStatus
            )
            // Handle cases where either the transfer failed or no data was
            // returned. Group these, as most transfers will succeed with data.
            // Equivalent to `or(iszero(success), iszero(returndatasize()))`
            // but after it's inverted for JUMPI this expression is cheaper.
            if iszero(and(success, iszero(iszero(returndatasize())))) {
                // If the token has no code or the transfer failed: Equivalent
                // to `or(iszero(success), iszero(extcodesize(token)))` but
                // after it's inverted for JUMPI this expression is cheaper.
                if iszero(and(iszero(iszero(extcodesize(token))), success)) {
                    // If the transfer failed:
                    if iszero(success) {
                        // If it was due to a revert:
                        if iszero(callStatus) {
                            // If it returned a message, bubble it up as long as
                            // sufficient gas remains to do so:
                            if returndatasize() {
                                // Ensure that sufficient gas is available to
                                // copy returndata while expanding memory where
                                // necessary. Start by computing the word size
                                // of returndata and allocated memory. Round up
                                // to the nearest full word.
                                let returnDataWords := div(
                                    add(returndatasize(), AlmostOneWord),
                                    OneWord
                                )
                                // Note: use the free memory pointer in place of
                                // msize() to work around a Yul warning that
                                // prevents accessing msize directly when the IR
                                // pipeline is activated.
                                let msizeWords := div(memPointer, OneWord)
                                // Next, compute the cost of the returndatacopy.
                                let cost := mul(CostPerWord, returnDataWords)
                                // Then, compute cost of new memory allocation.
                                if gt(returnDataWords, msizeWords) {
                                    cost := add(
                                        cost,
                                        add(
                                            mul(
                                                sub(
                                                    returnDataWords,
                                                    msizeWords
                                                ),
                                                CostPerWord
                                            ),
                                            div(
                                                sub(
                                                    mul(
                                                        returnDataWords,
                                                        returnDataWords
                                                    ),
                                                    mul(msizeWords, msizeWords)
                                                ),
                                                MemoryExpansionCoefficient
                                            )
                                        )
                                    )
                                }
                                // Finally, add a small constant and compare to
                                // gas remaining; bubble up the revert data if
                                // enough gas is still available.
                                if lt(add(cost, ExtraGasBuffer), gas()) {
                                    // Copy returndata to memory; overwrite
                                    // existing memory.
                                    returndatacopy(0, 0, returndatasize())
                                    // Revert, specifying memory region with
                                    // copied returndata.
                                    revert(0, returndatasize())
                                }
                            }
                            // Otherwise revert with a generic error message.
                            mstore(
                                TokenTransferGenericFailure_error_sig_ptr,
                                TokenTransferGenericFailure_error_signature
                            )
                            mstore(
                                TokenTransferGenericFailure_error_token_ptr,
                                token
                            )
                            mstore(
                                TokenTransferGenericFailure_error_from_ptr,
                                from
                            )
                            mstore(TokenTransferGenericFailure_error_to_ptr, to)
                            mstore(TokenTransferGenericFailure_error_id_ptr, 0)
                            mstore(
                                TokenTransferGenericFailure_error_amount_ptr,
                                amount
                            )
                            revert(
                                TokenTransferGenericFailure_error_sig_ptr,
                                TokenTransferGenericFailure_error_length
                            )
                        }
                        // Otherwise revert with a message about the token
                        // returning false or non-compliant return values.
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_sig_ptr,
                            BadReturnValueFromERC20OnTransfer_error_signature
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_token_ptr,
                            token
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_from_ptr,
                            from
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_to_ptr,
                            to
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_amount_ptr,
                            amount
                        )
                        revert(
                            BadReturnValueFromERC20OnTransfer_error_sig_ptr,
                            BadReturnValueFromERC20OnTransfer_error_length
                        )
                    }
                    // Otherwise, revert with error about token not having code:
                    mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                    mstore(NoContract_error_token_ptr, token)
                    revert(NoContract_error_sig_ptr, NoContract_error_length)
                }
                // Otherwise, the token just returned no data despite the call
                // having succeeded; no need to optimize for this as it's not
                // technically ERC20 compliant.
            }
            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }
    /**
     * @dev Internal function to transfer an ERC721 token from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer. Note that this function does
     *      not check whether the receiver can accept the ERC721 token (i.e. it
     *      does not use `safeTransferFrom`).
     *
     * @param token      The ERC721 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The tokenId to transfer.
     */
    function _performERC721Transfer(
        address token,
        address from,
        address to,
        uint256 identifier
    ) internal {
        // Utilize assembly to perform an optimized ERC721 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                mstore(NoContract_error_token_ptr, token)
                revert(NoContract_error_sig_ptr, NoContract_error_length)
            }
            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)
            // Write call data to memory starting with function selector.
            mstore(ERC721_transferFrom_sig_ptr, ERC721_transferFrom_signature)
            mstore(ERC721_transferFrom_from_ptr, from)
            mstore(ERC721_transferFrom_to_ptr, to)
            mstore(ERC721_transferFrom_id_ptr, identifier)
            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC721_transferFrom_sig_ptr,
                ERC721_transferFrom_length,
                0,
                0
            )
            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := div(
                        add(returndatasize(), AlmostOneWord),
                        OneWord
                    )
                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := div(memPointer, OneWord)
                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)
                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                div(
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    ),
                                    MemoryExpansionCoefficient
                                )
                            )
                        )
                    }
                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())
                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }
                // Otherwise revert with a generic error message.
                mstore(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_signature
                )
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(TokenTransferGenericFailure_error_id_ptr, identifier)
                mstore(TokenTransferGenericFailure_error_amount_ptr, 1)
                revert(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_length
                )
            }
            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }
    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer.
     *
     * @param token      The ERC1155 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The id to transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC1155Transfer(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC1155 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                mstore(NoContract_error_token_ptr, token)
                revert(NoContract_error_sig_ptr, NoContract_error_length)
            }
            // The following memory slots will be used when populating call data
            // for the transfer; read the values and restore them later.
            let memPointer := mload(FreeMemoryPointerSlot)
            let slot0x80 := mload(Slot0x80)
            let slot0xA0 := mload(Slot0xA0)
            let slot0xC0 := mload(Slot0xC0)
            // Write call data into memory, beginning with function selector.
            mstore(
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_signature
            )
            mstore(ERC1155_safeTransferFrom_from_ptr, from)
            mstore(ERC1155_safeTransferFrom_to_ptr, to)
            mstore(ERC1155_safeTransferFrom_id_ptr, identifier)
            mstore(ERC1155_safeTransferFrom_amount_ptr, amount)
            mstore(
                ERC1155_safeTransferFrom_data_offset_ptr,
                ERC1155_safeTransferFrom_data_length_offset
            )
            mstore(ERC1155_safeTransferFrom_data_length_ptr, 0)
            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_length,
                0,
                0
            )
            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := div(
                        add(returndatasize(), AlmostOneWord),
                        OneWord
                    )
                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := div(memPointer, OneWord)
                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)
                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                div(
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    ),
                                    MemoryExpansionCoefficient
                                )
                            )
                        )
                    }
                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())
                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }
                // Otherwise revert with a generic error message.
                mstore(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_signature
                )
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(TokenTransferGenericFailure_error_id_ptr, identifier)
                mstore(TokenTransferGenericFailure_error_amount_ptr, amount)
                revert(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_length
                )
            }
            mstore(Slot0x80, slot0x80) // Restore slot 0x80.
            mstore(Slot0xA0, slot0xA0) // Restore slot 0xA0.
            mstore(Slot0xC0, slot0xC0) // Restore slot 0xC0.
            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)
            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }
    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer. NOTE: this function is not
     *      memory-safe; it will overwrite existing memory, restore the free
     *      memory pointer to the default value, and overwrite the zero slot.
     *      This function should only be called once memory is no longer
     *      required and when uninitialized arrays are not utilized, and memory
     *      should be considered fully corrupted (aside from the existence of a
     *      default-value free memory pointer) after calling this function.
     *
     * @param batchTransfers The group of 1155 batch transfers to perform.
     */
    function _performERC1155BatchTransfers(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) internal {
        // Utilize assembly to perform optimized batch 1155 transfers.
        assembly {
            let len := batchTransfers.length
            // Pointer to first head in the array, which is offset to the struct
            // at each index. This gets incremented after each loop to avoid
            // multiplying by 32 to get the offset for each element.
            let nextElementHeadPtr := batchTransfers.offset
            // Pointer to beginning of the head of the array. This is the
            // reference position each offset references. It's held static to
            // let each loop calculate the data position for an element.
            let arrayHeadPtr := nextElementHeadPtr
            // Write the function selector, which will be reused for each call:
            // safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)
            mstore(
                ConduitBatch1155Transfer_from_offset,
                ERC1155_safeBatchTransferFrom_signature
            )
            // Iterate over each batch transfer.
            for {
                let i := 0
            } lt(i, len) {
                i := add(i, 1)
            } {
                // Read the offset to the beginning of the element and add
                // it to pointer to the beginning of the array head to get
                // the absolute position of the element in calldata.
                let elementPtr := add(
                    arrayHeadPtr,
                    calldataload(nextElementHeadPtr)
                )
                // Retrieve the token from calldata.
                let token := calldataload(elementPtr)
                // If the token has no code, revert.
                if iszero(extcodesize(token)) {
                    mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                    mstore(NoContract_error_token_ptr, token)
                    revert(NoContract_error_sig_ptr, NoContract_error_length)
                }
                // Get the total number of supplied ids.
                let idsLength := calldataload(
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset)
                )
                // Determine the expected offset for the amounts array.
                let expectedAmountsOffset := add(
                    ConduitBatch1155Transfer_amounts_length_baseOffset,
                    mul(idsLength, OneWord)
                )
                // Validate struct encoding.
                let invalidEncoding := iszero(
                    and(
                        // ids.length == amounts.length
                        eq(
                            idsLength,
                            calldataload(add(elementPtr, expectedAmountsOffset))
                        ),
                        and(
                            // ids_offset == 0xa0
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatch1155Transfer_ids_head_offset
                                    )
                                ),
                                ConduitBatch1155Transfer_ids_length_offset
                            ),
                            // amounts_offset == 0xc0 + ids.length*32
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatchTransfer_amounts_head_offset
                                    )
                                ),
                                expectedAmountsOffset
                            )
                        )
                    )
                )
                // Revert with an error if the encoding is not valid.
                if invalidEncoding {
                    mstore(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_selector
                    )
                    revert(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_length
                    )
                }
                // Update the offset position for the next loop
                nextElementHeadPtr := add(nextElementHeadPtr, OneWord)
                // Copy the first section of calldata (before dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_from_offset),
                    ConduitBatch1155Transfer_usable_head_size
                )
                // Determine size of calldata required for ids and amounts. Note
                // that the size includes both lengths as well as the data.
                let idsAndAmountsSize := add(TwoWords, mul(idsLength, TwoWords))
                // Update the offset for the data array in memory.
                mstore(
                    BatchTransfer1155Params_data_head_ptr,
                    add(
                        BatchTransfer1155Params_ids_length_offset,
                        idsAndAmountsSize
                    )
                )
                // Set the length of the data array in memory to zero.
                mstore(
                    add(
                        BatchTransfer1155Params_data_length_basePtr,
                        idsAndAmountsSize
                    ),
                    0
                )
                // Determine the total calldata size for the call to transfer.
                let transferDataSize := add(
                    BatchTransfer1155Params_calldata_baseSize,
                    idsAndAmountsSize
                )
                // Copy second section of calldata (including dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ids_length_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset),
                    idsAndAmountsSize
                )
                // Perform the call to transfer 1155 tokens.
                let success := call(
                    gas(),
                    token,
                    0,
                    ConduitBatch1155Transfer_from_offset, // Data portion start.
                    transferDataSize, // Location of the length of callData.
                    0,
                    0
                )
                // If the transfer reverted:
                if iszero(success) {
                    // If it returned a message, bubble it up as long as
                    // sufficient gas remains to do so:
                    if returndatasize() {
                        // Ensure that sufficient gas is available to copy
                        // returndata while expanding memory where necessary.
                        // Start by computing word size of returndata and
                        // allocated memory. Round up to the nearest full word.
                        let returnDataWords := div(
                            add(returndatasize(), AlmostOneWord),
                            OneWord
                        )
                        // Note: use transferDataSize in place of msize() to
                        // work around a Yul warning that prevents accessing
                        // msize directly when the IR pipeline is activated.
                        // The free memory pointer is not used here because
                        // this function does almost all memory management
                        // manually and does not update it, and transferDataSize
                        // should be the largest memory value used (unless a
                        // previous batch was larger).
                        let msizeWords := div(transferDataSize, OneWord)
                        // Next, compute the cost of the returndatacopy.
                        let cost := mul(CostPerWord, returnDataWords)
                        // Then, compute cost of new memory allocation.
                        if gt(returnDataWords, msizeWords) {
                            cost := add(
                                cost,
                                add(
                                    mul(
                                        sub(returnDataWords, msizeWords),
                                        CostPerWord
                                    ),
                                    div(
                                        sub(
                                            mul(
                                                returnDataWords,
                                                returnDataWords
                                            ),
                                            mul(msizeWords, msizeWords)
                                        ),
                                        MemoryExpansionCoefficient
                                    )
                                )
                            )
                        }
                        // Finally, add a small constant and compare to gas
                        // remaining; bubble up the revert data if enough gas is
                        // still available.
                        if lt(add(cost, ExtraGasBuffer), gas()) {
                            // Copy returndata to memory; overwrite existing.
                            returndatacopy(0, 0, returndatasize())
                            // Revert with memory region containing returndata.
                            revert(0, returndatasize())
                        }
                    }
                    // Set the error signature.
                    mstore(
                        0,
                        ERC1155BatchTransferGenericFailure_error_signature
                    )
                    // Write the token.
                    mstore(ERC1155BatchTransferGenericFailure_token_ptr, token)
                    // Increase the offset to ids by 32.
                    mstore(
                        BatchTransfer1155Params_ids_head_ptr,
                        ERC1155BatchTransferGenericFailure_ids_offset
                    )
                    // Increase the offset to amounts by 32.
                    mstore(
                        BatchTransfer1155Params_amounts_head_ptr,
                        add(
                            OneWord,
                            mload(BatchTransfer1155Params_amounts_head_ptr)
                        )
                    )
                    // Return modified region. The total size stays the same as
                    // `token` uses the same number of bytes as `data.length`.
                    revert(0, transferDataSize)
                }
            }
            // Reset the free memory pointer to the default value; memory must
            // be assumed to be dirtied and not reused from this point forward.
            // Also note that the zero slot is not reset to zero, meaning empty
            // arrays cannot be safely created or utilized until it is restored.
            mstore(FreeMemoryPointerSlot, DefaultFreeMemoryPointer)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
import { ConduitItemType } from "./ConduitEnums.sol";
struct ConduitTransfer {
    ConduitItemType itemType;
    address token;
    address from;
    address to;
    uint256 identifier;
    uint256 amount;
}
struct ConduitBatch1155Transfer {
    address token;
    address from;
    address to;
    uint256[] ids;
    uint256[] amounts;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
// error ChannelClosed(address channel)
uint256 constant ChannelClosed_error_signature = (
    0x93daadf200000000000000000000000000000000000000000000000000000000
);
uint256 constant ChannelClosed_error_ptr = 0x00;
uint256 constant ChannelClosed_channel_ptr = 0x4;
uint256 constant ChannelClosed_error_length = 0x24;
// For the mapping:
// mapping(address => bool) channels
// The position in storage for a particular account is:
// keccak256(abi.encode(account, channels.slot))
uint256 constant ChannelKey_channel_ptr = 0x00;
uint256 constant ChannelKey_slot_ptr = 0x20;
uint256 constant ChannelKey_length = 0x40;
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
/*
 * -------------------------- Disambiguation & Other Notes ---------------------
 *    - The term "head" is used as it is in the documentation for ABI encoding,
 *      but only in reference to dynamic types, i.e. it always refers to the
 *      offset or pointer to the body of a dynamic type. In calldata, the head
 *      is always an offset (relative to the parent object), while in memory,
 *      the head is always the pointer to the body. More information found here:
 *      https://docs.soliditylang.org/en/v0.8.14/abi-spec.html#argument-encoding
 *        - Note that the length of an array is separate from and precedes the
 *          head of the array.
 *
 *    - The term "body" is used in place of the term "head" used in the ABI
 *      documentation. It refers to the start of the data for a dynamic type,
 *      e.g. the first word of a struct or the first word of the first element
 *      in an array.
 *
 *    - The term "pointer" is used to describe the absolute position of a value
 *      and never an offset relative to another value.
 *        - The suffix "_ptr" refers to a memory pointer.
 *        - The suffix "_cdPtr" refers to a calldata pointer.
 *
 *    - The term "offset" is used to describe the position of a value relative
 *      to some parent value. For example, OrderParameters_conduit_offset is the
 *      offset to the "conduit" value in the OrderParameters struct relative to
 *      the start of the body.
 *        - Note: Offsets are used to derive pointers.
 *
 *    - Some structs have pointers defined for all of their fields in this file.
 *      Lines which are commented out are fields that are not used in the
 *      codebase but have been left in for readability.
 */
uint256 constant AlmostOneWord = 0x1f;
uint256 constant OneWord = 0x20;
uint256 constant TwoWords = 0x40;
uint256 constant ThreeWords = 0x60;
uint256 constant FreeMemoryPointerSlot = 0x40;
uint256 constant ZeroSlot = 0x60;
uint256 constant DefaultFreeMemoryPointer = 0x80;
uint256 constant Slot0x80 = 0x80;
uint256 constant Slot0xA0 = 0xa0;
uint256 constant Slot0xC0 = 0xc0;
// abi.encodeWithSignature("transferFrom(address,address,uint256)")
uint256 constant ERC20_transferFrom_signature = (
    0x23b872dd00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC20_transferFrom_sig_ptr = 0x0;
uint256 constant ERC20_transferFrom_from_ptr = 0x04;
uint256 constant ERC20_transferFrom_to_ptr = 0x24;
uint256 constant ERC20_transferFrom_amount_ptr = 0x44;
uint256 constant ERC20_transferFrom_length = 0x64; // 4 + 32 * 3 == 100
// abi.encodeWithSignature(
//     "safeTransferFrom(address,address,uint256,uint256,bytes)"
// )
uint256 constant ERC1155_safeTransferFrom_signature = (
    0xf242432a00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155_safeTransferFrom_sig_ptr = 0x0;
uint256 constant ERC1155_safeTransferFrom_from_ptr = 0x04;
uint256 constant ERC1155_safeTransferFrom_to_ptr = 0x24;
uint256 constant ERC1155_safeTransferFrom_id_ptr = 0x44;
uint256 constant ERC1155_safeTransferFrom_amount_ptr = 0x64;
uint256 constant ERC1155_safeTransferFrom_data_offset_ptr = 0x84;
uint256 constant ERC1155_safeTransferFrom_data_length_ptr = 0xa4;
uint256 constant ERC1155_safeTransferFrom_length = 0xc4; // 4 + 32 * 6 == 196
uint256 constant ERC1155_safeTransferFrom_data_length_offset = 0xa0;
// abi.encodeWithSignature(
//     "safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)"
// )
uint256 constant ERC1155_safeBatchTransferFrom_signature = (
    0x2eb2c2d600000000000000000000000000000000000000000000000000000000
);
bytes4 constant ERC1155_safeBatchTransferFrom_selector = bytes4(
    bytes32(ERC1155_safeBatchTransferFrom_signature)
);
uint256 constant ERC721_transferFrom_signature = ERC20_transferFrom_signature;
uint256 constant ERC721_transferFrom_sig_ptr = 0x0;
uint256 constant ERC721_transferFrom_from_ptr = 0x04;
uint256 constant ERC721_transferFrom_to_ptr = 0x24;
uint256 constant ERC721_transferFrom_id_ptr = 0x44;
uint256 constant ERC721_transferFrom_length = 0x64; // 4 + 32 * 3 == 100
// abi.encodeWithSignature("NoContract(address)")
uint256 constant NoContract_error_signature = (
    0x5f15d67200000000000000000000000000000000000000000000000000000000
);
uint256 constant NoContract_error_sig_ptr = 0x0;
uint256 constant NoContract_error_token_ptr = 0x4;
uint256 constant NoContract_error_length = 0x24; // 4 + 32 == 36
// abi.encodeWithSignature(
//     "TokenTransferGenericFailure(address,address,address,uint256,uint256)"
// )
uint256 constant TokenTransferGenericFailure_error_signature = (
    0xf486bc8700000000000000000000000000000000000000000000000000000000
);
uint256 constant TokenTransferGenericFailure_error_sig_ptr = 0x0;
uint256 constant TokenTransferGenericFailure_error_token_ptr = 0x4;
uint256 constant TokenTransferGenericFailure_error_from_ptr = 0x24;
uint256 constant TokenTransferGenericFailure_error_to_ptr = 0x44;
uint256 constant TokenTransferGenericFailure_error_id_ptr = 0x64;
uint256 constant TokenTransferGenericFailure_error_amount_ptr = 0x84;
// 4 + 32 * 5 == 164
uint256 constant TokenTransferGenericFailure_error_length = 0xa4;
// abi.encodeWithSignature(
//     "BadReturnValueFromERC20OnTransfer(address,address,address,uint256)"
// )
uint256 constant BadReturnValueFromERC20OnTransfer_error_signature = (
    0x9889192300000000000000000000000000000000000000000000000000000000
);
uint256 constant BadReturnValueFromERC20OnTransfer_error_sig_ptr = 0x0;
uint256 constant BadReturnValueFromERC20OnTransfer_error_token_ptr = 0x4;
uint256 constant BadReturnValueFromERC20OnTransfer_error_from_ptr = 0x24;
uint256 constant BadReturnValueFromERC20OnTransfer_error_to_ptr = 0x44;
uint256 constant BadReturnValueFromERC20OnTransfer_error_amount_ptr = 0x64;
// 4 + 32 * 4 == 132
uint256 constant BadReturnValueFromERC20OnTransfer_error_length = 0x84;
uint256 constant ExtraGasBuffer = 0x20;
uint256 constant CostPerWord = 3;
uint256 constant MemoryExpansionCoefficient = 0x200;
// Values are offset by 32 bytes in order to write the token to the beginning
// in the event of a revert
uint256 constant BatchTransfer1155Params_ptr = 0x24;
uint256 constant BatchTransfer1155Params_ids_head_ptr = 0x64;
uint256 constant BatchTransfer1155Params_amounts_head_ptr = 0x84;
uint256 constant BatchTransfer1155Params_data_head_ptr = 0xa4;
uint256 constant BatchTransfer1155Params_data_length_basePtr = 0xc4;
uint256 constant BatchTransfer1155Params_calldata_baseSize = 0xc4;
uint256 constant BatchTransfer1155Params_ids_length_ptr = 0xc4;
uint256 constant BatchTransfer1155Params_ids_length_offset = 0xa0;
uint256 constant BatchTransfer1155Params_amounts_length_baseOffset = 0xc0;
uint256 constant BatchTransfer1155Params_data_length_baseOffset = 0xe0;
uint256 constant ConduitBatch1155Transfer_usable_head_size = 0x80;
uint256 constant ConduitBatch1155Transfer_from_offset = 0x20;
uint256 constant ConduitBatch1155Transfer_ids_head_offset = 0x60;
uint256 constant ConduitBatch1155Transfer_amounts_head_offset = 0x80;
uint256 constant ConduitBatch1155Transfer_ids_length_offset = 0xa0;
uint256 constant ConduitBatch1155Transfer_amounts_length_baseOffset = 0xc0;
uint256 constant ConduitBatch1155Transfer_calldata_baseSize = 0xc0;
// Note: abbreviated version of above constant to adhere to line length limit.
uint256 constant ConduitBatchTransfer_amounts_head_offset = 0x80;
uint256 constant Invalid1155BatchTransferEncoding_ptr = 0x00;
uint256 constant Invalid1155BatchTransferEncoding_length = 0x04;
uint256 constant Invalid1155BatchTransferEncoding_selector = (
    0xeba2084c00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155BatchTransferGenericFailure_error_signature = (
    0xafc445e200000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155BatchTransferGenericFailure_token_ptr = 0x04;
uint256 constant ERC1155BatchTransferGenericFailure_ids_offset = 0xc0;
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.7;
/**
 * @title TokenTransferrerErrors
 */
interface TokenTransferrerErrors {
    /**
     * @dev Revert with an error when an ERC721 transfer with amount other than
     *      one is attempted.
     */
    error InvalidERC721TransferAmount();
    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has an amount of zero.
     */
    error MissingItemAmount();
    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has unused parameters. This includes both the token and the
     *      identifier parameters for native transfers as well as the identifier
     *      parameter for ERC20 transfers. Note that the conduit does not
     *      perform this check, leaving it up to the calling channel to enforce
     *      when desired.
     */
    error UnusedItemParameters();
    /**
     * @dev Revert with an error when an ERC20, ERC721, or ERC1155 token
     *      transfer reverts.
     *
     * @param token      The token for which the transfer was attempted.
     * @param from       The source of the attempted transfer.
     * @param to         The recipient of the attempted transfer.
     * @param identifier The identifier for the attempted transfer.
     * @param amount     The amount for the attempted transfer.
     */
    error TokenTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    );
    /**
     * @dev Revert with an error when a batch ERC1155 token transfer reverts.
     *
     * @param token       The token for which the transfer was attempted.
     * @param from        The source of the attempted transfer.
     * @param to          The recipient of the attempted transfer.
     * @param identifiers The identifiers for the attempted transfer.
     * @param amounts     The amounts for the attempted transfer.
     */
    error ERC1155BatchTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256[] identifiers,
        uint256[] amounts
    );
    /**
     * @dev Revert with an error when an ERC20 token transfer returns a falsey
     *      value.
     *
     * @param token      The token for which the ERC20 transfer was attempted.
     * @param from       The source of the attempted ERC20 transfer.
     * @param to         The recipient of the attempted ERC20 transfer.
     * @param amount     The amount for the attempted ERC20 transfer.
     */
    error BadReturnValueFromERC20OnTransfer(
        address token,
        address from,
        address to,
        uint256 amount
    );
    /**
     * @dev Revert with an error when an account being called as an assumed
     *      contract does not have code and returns no data.
     *
     * @param account The account that should contain code.
     */
    error NoContract(address account);
    /**
     * @dev Revert with an error when attempting to execute an 1155 batch
     *      transfer using calldata not produced by default ABI encoding or with
     *      different lengths for ids and amounts arrays.
     */
    error Invalid1155BatchTransferEncoding();
}

pragma solidity ^0.4.13;

contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    require(newOwner != address(0));
    emit OwnershipTransferred(owner, newOwner);
    owner = newOwner;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }
}

contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender)
    public view returns (uint256);

  function transferFrom(address from, address to, uint256 value)
    public returns (bool);

  function approve(address spender, uint256 value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

contract TokenRecipient {
    event ReceivedEther(address indexed sender, uint amount);
    event ReceivedTokens(address indexed from, uint256 value, address indexed token, bytes extraData);

    /**
     * @dev Receive tokens and generate a log event
     * @param from Address from which to transfer tokens
     * @param value Amount of tokens to transfer
     * @param token Address of token
     * @param extraData Additional data to log
     */
    function receiveApproval(address from, uint256 value, address token, bytes extraData) public {
        ERC20 t = ERC20(token);
        require(t.transferFrom(from, this, value));
        emit ReceivedTokens(from, value, token, extraData);
    }

    /**
     * @dev Receive Ether and generate a log event
     */
    function () payable public {
        emit ReceivedEther(msg.sender, msg.value);
    }
}

contract ProxyRegistry is Ownable {

    /* DelegateProxy implementation contract. Must be initialized. */
    address public delegateProxyImplementation;

    /* Authenticated proxies by user. */
    mapping(address => OwnableDelegateProxy) public proxies;

    /* Contracts pending access. */
    mapping(address => uint) public pending;

    /* Contracts allowed to call those proxies. */
    mapping(address => bool) public contracts;

    /* Delay period for adding an authenticated contract.
       This mitigates a particular class of potential attack on the Wyvern DAO (which owns this registry) - if at any point the value of assets held by proxy contracts exceeded the value of half the WYV supply (votes in the DAO),
       a malicious but rational attacker could buy half the Wyvern and grant themselves access to all the proxy contracts. A delay period renders this attack nonthreatening - given two weeks, if that happened, users would have
       plenty of time to notice and transfer their assets.
    */
    uint public DELAY_PERIOD = 2 weeks;

    /**
     * Start the process to enable access for specified contract. Subject to delay period.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function startGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] == 0);
        pending[addr] = now;
    }

    /**
     * End the process to nable access for specified contract after delay period has passed.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function endGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] != 0 && ((pending[addr] + DELAY_PERIOD) < now));
        pending[addr] = 0;
        contracts[addr] = true;
    }

    /**
     * Revoke access for specified contract. Can be done instantly.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address of which to revoke permissions
     */    
    function revokeAuthentication (address addr)
        public
        onlyOwner
    {
        contracts[addr] = false;
    }

    /**
     * Register a proxy contract with this registry
     *
     * @dev Must be called by the user which the proxy is for, creates a new AuthenticatedProxy
     * @return New AuthenticatedProxy contract
     */
    function registerProxy()
        public
        returns (OwnableDelegateProxy proxy)
    {
        require(proxies[msg.sender] == address(0));
        proxy = new OwnableDelegateProxy(msg.sender, delegateProxyImplementation, abi.encodeWithSignature("initialize(address,address)", msg.sender, address(this)));
        proxies[msg.sender] = proxy;
        return proxy;
    }

}

contract WyvernProxyRegistry is ProxyRegistry {

    string public constant name = "Project Wyvern Proxy Registry";

    /* Whether the initial auth address has been set. */
    bool public initialAddressSet = false;

    constructor ()
        public
    {
        delegateProxyImplementation = new AuthenticatedProxy();
    }

    /** 
     * Grant authentication to the initial Exchange protocol contract
     *
     * @dev No delay, can only be called once - after that the standard registry process with a delay must be used
     * @param authAddress Address of the contract to grant authentication
     */
    function grantInitialAuthentication (address authAddress)
        onlyOwner
        public
    {
        require(!initialAddressSet);
        initialAddressSet = true;
        contracts[authAddress] = true;
    }

}

contract OwnedUpgradeabilityStorage {

  // Current implementation
  address internal _implementation;

  // Owner of the contract
  address private _upgradeabilityOwner;

  /**
   * @dev Tells the address of the owner
   * @return the address of the owner
   */
  function upgradeabilityOwner() public view returns (address) {
    return _upgradeabilityOwner;
  }

  /**
   * @dev Sets the address of the owner
   */
  function setUpgradeabilityOwner(address newUpgradeabilityOwner) internal {
    _upgradeabilityOwner = newUpgradeabilityOwner;
  }

  /**
  * @dev Tells the address of the current implementation
  * @return address of the current implementation
  */
  function implementation() public view returns (address) {
    return _implementation;
  }

  /**
  * @dev Tells the proxy type (EIP 897)
  * @return Proxy type, 2 for forwarding proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId) {
    return 2;
  }
}

contract AuthenticatedProxy is TokenRecipient, OwnedUpgradeabilityStorage {

    /* Whether initialized. */
    bool initialized = false;

    /* Address which owns this proxy. */
    address public user;

    /* Associated registry with contract authentication information. */
    ProxyRegistry public registry;

    /* Whether access has been revoked. */
    bool public revoked;

    /* Delegate call could be used to atomically transfer multiple assets owned by the proxy contract with one order. */
    enum HowToCall { Call, DelegateCall }

    /* Event fired when the proxy access is revoked or unrevoked. */
    event Revoked(bool revoked);

    /**
     * Initialize an AuthenticatedProxy
     *
     * @param addrUser Address of user on whose behalf this proxy will act
     * @param addrRegistry Address of ProxyRegistry contract which will manage this proxy
     */
    function initialize (address addrUser, ProxyRegistry addrRegistry)
        public
    {
        require(!initialized);
        initialized = true;
        user = addrUser;
        registry = addrRegistry;
    }

    /**
     * Set the revoked flag (allows a user to revoke ProxyRegistry access)
     *
     * @dev Can be called by the user only
     * @param revoke Whether or not to revoke access
     */
    function setRevoke(bool revoke)
        public
    {
        require(msg.sender == user);
        revoked = revoke;
        emit Revoked(revoke);
    }

    /**
     * Execute a message call from the proxy contract
     *
     * @dev Can be called by the user, or by a contract authorized by the registry as long as the user has not revoked access
     * @param dest Address to which the call will be sent
     * @param howToCall Which kind of call to make
     * @param calldata Calldata to send
     * @return Result of the call (success or failure)
     */
    function proxy(address dest, HowToCall howToCall, bytes calldata)
        public
        returns (bool result)
    {
        require(msg.sender == user || (!revoked && registry.contracts(msg.sender)));
        if (howToCall == HowToCall.Call) {
            result = dest.call(calldata);
        } else if (howToCall == HowToCall.DelegateCall) {
            result = dest.delegatecall(calldata);
        }
        return result;
    }

    /**
     * Execute a message call and assert success
     * 
     * @dev Same functionality as `proxy`, just asserts the return value
     * @param dest Address to which the call will be sent
     * @param howToCall What kind of call to make
     * @param calldata Calldata to send
     */
    function proxyAssert(address dest, HowToCall howToCall, bytes calldata)
        public
    {
        require(proxy(dest, howToCall, calldata));
    }

}

contract Proxy {

  /**
  * @dev Tells the address of the implementation where every call will be delegated.
  * @return address of the implementation to which it will be delegated
  */
  function implementation() public view returns (address);

  /**
  * @dev Tells the type of proxy (EIP 897)
  * @return Type of proxy, 2 for upgradeable proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId);

  /**
  * @dev Fallback function allowing to perform a delegatecall to the given implementation.
  * This function will return whatever the implementation call returns
  */
  function () payable public {
    address _impl = implementation();
    require(_impl != address(0));

    assembly {
      let ptr := mload(0x40)
      calldatacopy(ptr, 0, calldatasize)
      let result := delegatecall(gas, _impl, ptr, calldatasize, 0, 0)
      let size := returndatasize
      returndatacopy(ptr, 0, size)

      switch result
      case 0 { revert(ptr, size) }
      default { return(ptr, size) }
    }
  }
}

contract OwnedUpgradeabilityProxy is Proxy, OwnedUpgradeabilityStorage {
  /**
  * @dev Event to show ownership has been transferred
  * @param previousOwner representing the address of the previous owner
  * @param newOwner representing the address of the new owner
  */
  event ProxyOwnershipTransferred(address previousOwner, address newOwner);

  /**
  * @dev This event will be emitted every time the implementation gets upgraded
  * @param implementation representing the address of the upgraded implementation
  */
  event Upgraded(address indexed implementation);

  /**
  * @dev Upgrades the implementation address
  * @param implementation representing the address of the new implementation to be set
  */
  function _upgradeTo(address implementation) internal {
    require(_implementation != implementation);
    _implementation = implementation;
    emit Upgraded(implementation);
  }

  /**
  * @dev Throws if called by any account other than the owner.
  */
  modifier onlyProxyOwner() {
    require(msg.sender == proxyOwner());
    _;
  }

  /**
   * @dev Tells the address of the proxy owner
   * @return the address of the proxy owner
   */
  function proxyOwner() public view returns (address) {
    return upgradeabilityOwner();
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferProxyOwnership(address newOwner) public onlyProxyOwner {
    require(newOwner != address(0));
    emit ProxyOwnershipTransferred(proxyOwner(), newOwner);
    setUpgradeabilityOwner(newOwner);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy.
   * @param implementation representing the address of the new implementation to be set.
   */
  function upgradeTo(address implementation) public onlyProxyOwner {
    _upgradeTo(implementation);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy
   * and delegatecall the new implementation for initialization.
   * @param implementation representing the address of the new implementation to be set.
   * @param data represents the msg.data to bet sent in the low level call. This parameter may include the function
   * signature of the implementation to be called with the needed payload
   */
  function upgradeToAndCall(address implementation, bytes data) payable public onlyProxyOwner {
    upgradeTo(implementation);
    require(address(this).delegatecall(data));
  }
}

contract OwnableDelegateProxy is OwnedUpgradeabilityProxy {

    constructor(address owner, address initialImplementation, bytes calldata)
        public
    {
        setUpgradeabilityOwner(owner);
        _upgradeTo(initialImplementation);
        require(initialImplementation.delegatecall(calldata));
    }

}