// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.7.6;
import './interfaces/IUniswapV3Pool.sol';
import './NoDelegateCall.sol';
import './libraries/LowGasSafeMath.sol';
import './libraries/SafeCast.sol';
import './libraries/Tick.sol';
import './libraries/TickBitmap.sol';
import './libraries/Position.sol';
import './libraries/Oracle.sol';
import './libraries/FullMath.sol';
import './libraries/FixedPoint128.sol';
import './libraries/TransferHelper.sol';
import './libraries/TickMath.sol';
import './libraries/LiquidityMath.sol';
import './libraries/SqrtPriceMath.sol';
import './libraries/SwapMath.sol';
import './interfaces/IUniswapV3PoolDeployer.sol';
import './interfaces/IUniswapV3Factory.sol';
import './interfaces/IERC20Minimal.sol';
import './interfaces/callback/IUniswapV3MintCallback.sol';
import './interfaces/callback/IUniswapV3SwapCallback.sol';
import './interfaces/callback/IUniswapV3FlashCallback.sol';
contract UniswapV3Pool is IUniswapV3Pool, NoDelegateCall {
    using LowGasSafeMath for uint256;
    using LowGasSafeMath for int256;
    using SafeCast for uint256;
    using SafeCast for int256;
    using Tick for mapping(int24 => Tick.Info);
    using TickBitmap for mapping(int16 => uint256);
    using Position for mapping(bytes32 => Position.Info);
    using Position for Position.Info;
    using Oracle for Oracle.Observation[65535];
    /// @inheritdoc IUniswapV3PoolImmutables
    address public immutable override factory;
    /// @inheritdoc IUniswapV3PoolImmutables
    address public immutable override token0;
    /// @inheritdoc IUniswapV3PoolImmutables
    address public immutable override token1;
    /// @inheritdoc IUniswapV3PoolImmutables
    uint24 public immutable override fee;
    /// @inheritdoc IUniswapV3PoolImmutables
    int24 public immutable override tickSpacing;
    /// @inheritdoc IUniswapV3PoolImmutables
    uint128 public immutable override maxLiquidityPerTick;
    struct Slot0 {
        // the current price
        uint160 sqrtPriceX96;
        // the current tick
        int24 tick;
        // the most-recently updated index of the observations array
        uint16 observationIndex;
        // the current maximum number of observations that are being stored
        uint16 observationCardinality;
        // the next maximum number of observations to store, triggered in observations.write
        uint16 observationCardinalityNext;
        // the current protocol fee as a percentage of the swap fee taken on withdrawal
        // represented as an integer denominator (1/x)%
        uint8 feeProtocol;
        // whether the pool is locked
        bool unlocked;
    }
    /// @inheritdoc IUniswapV3PoolState
    Slot0 public override slot0;
    /// @inheritdoc IUniswapV3PoolState
    uint256 public override feeGrowthGlobal0X128;
    /// @inheritdoc IUniswapV3PoolState
    uint256 public override feeGrowthGlobal1X128;
    // accumulated protocol fees in token0/token1 units
    struct ProtocolFees {
        uint128 token0;
        uint128 token1;
    }
    /// @inheritdoc IUniswapV3PoolState
    ProtocolFees public override protocolFees;
    /// @inheritdoc IUniswapV3PoolState
    uint128 public override liquidity;
    /// @inheritdoc IUniswapV3PoolState
    mapping(int24 => Tick.Info) public override ticks;
    /// @inheritdoc IUniswapV3PoolState
    mapping(int16 => uint256) public override tickBitmap;
    /// @inheritdoc IUniswapV3PoolState
    mapping(bytes32 => Position.Info) public override positions;
    /// @inheritdoc IUniswapV3PoolState
    Oracle.Observation[65535] public override observations;
    /// @dev Mutually exclusive reentrancy protection into the pool to/from a method. This method also prevents entrance
    /// to a function before the pool is initialized. The reentrancy guard is required throughout the contract because
    /// we use balance checks to determine the payment status of interactions such as mint, swap and flash.
    modifier lock() {
        require(slot0.unlocked, 'LOK');
        slot0.unlocked = false;
        _;
        slot0.unlocked = true;
    }
    /// @dev Prevents calling a function from anyone except the address returned by IUniswapV3Factory#owner()
    modifier onlyFactoryOwner() {
        require(msg.sender == IUniswapV3Factory(factory).owner());
        _;
    }
    constructor() {
        int24 _tickSpacing;
        (factory, token0, token1, fee, _tickSpacing) = IUniswapV3PoolDeployer(msg.sender).parameters();
        tickSpacing = _tickSpacing;
        maxLiquidityPerTick = Tick.tickSpacingToMaxLiquidityPerTick(_tickSpacing);
    }
    /// @dev Common checks for valid tick inputs.
    function checkTicks(int24 tickLower, int24 tickUpper) private pure {
        require(tickLower < tickUpper, 'TLU');
        require(tickLower >= TickMath.MIN_TICK, 'TLM');
        require(tickUpper <= TickMath.MAX_TICK, 'TUM');
    }
    /// @dev Returns the block timestamp truncated to 32 bits, i.e. mod 2**32. This method is overridden in tests.
    function _blockTimestamp() internal view virtual returns (uint32) {
        return uint32(block.timestamp); // truncation is desired
    }
    /// @dev Get the pool's balance of token0
    /// @dev This function is gas optimized to avoid a redundant extcodesize check in addition to the returndatasize
    /// check
    function balance0() private view returns (uint256) {
        (bool success, bytes memory data) =
            token0.staticcall(abi.encodeWithSelector(IERC20Minimal.balanceOf.selector, address(this)));
        require(success && data.length >= 32);
        return abi.decode(data, (uint256));
    }
    /// @dev Get the pool's balance of token1
    /// @dev This function is gas optimized to avoid a redundant extcodesize check in addition to the returndatasize
    /// check
    function balance1() private view returns (uint256) {
        (bool success, bytes memory data) =
            token1.staticcall(abi.encodeWithSelector(IERC20Minimal.balanceOf.selector, address(this)));
        require(success && data.length >= 32);
        return abi.decode(data, (uint256));
    }
    /// @inheritdoc IUniswapV3PoolDerivedState
    function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
        external
        view
        override
        noDelegateCall
        returns (
            int56 tickCumulativeInside,
            uint160 secondsPerLiquidityInsideX128,
            uint32 secondsInside
        )
    {
        checkTicks(tickLower, tickUpper);
        int56 tickCumulativeLower;
        int56 tickCumulativeUpper;
        uint160 secondsPerLiquidityOutsideLowerX128;
        uint160 secondsPerLiquidityOutsideUpperX128;
        uint32 secondsOutsideLower;
        uint32 secondsOutsideUpper;
        {
            Tick.Info storage lower = ticks[tickLower];
            Tick.Info storage upper = ticks[tickUpper];
            bool initializedLower;
            (tickCumulativeLower, secondsPerLiquidityOutsideLowerX128, secondsOutsideLower, initializedLower) = (
                lower.tickCumulativeOutside,
                lower.secondsPerLiquidityOutsideX128,
                lower.secondsOutside,
                lower.initialized
            );
            require(initializedLower);
            bool initializedUpper;
            (tickCumulativeUpper, secondsPerLiquidityOutsideUpperX128, secondsOutsideUpper, initializedUpper) = (
                upper.tickCumulativeOutside,
                upper.secondsPerLiquidityOutsideX128,
                upper.secondsOutside,
                upper.initialized
            );
            require(initializedUpper);
        }
        Slot0 memory _slot0 = slot0;
        if (_slot0.tick < tickLower) {
            return (
                tickCumulativeLower - tickCumulativeUpper,
                secondsPerLiquidityOutsideLowerX128 - secondsPerLiquidityOutsideUpperX128,
                secondsOutsideLower - secondsOutsideUpper
            );
        } else if (_slot0.tick < tickUpper) {
            uint32 time = _blockTimestamp();
            (int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128) =
                observations.observeSingle(
                    time,
                    0,
                    _slot0.tick,
                    _slot0.observationIndex,
                    liquidity,
                    _slot0.observationCardinality
                );
            return (
                tickCumulative - tickCumulativeLower - tickCumulativeUpper,
                secondsPerLiquidityCumulativeX128 -
                    secondsPerLiquidityOutsideLowerX128 -
                    secondsPerLiquidityOutsideUpperX128,
                time - secondsOutsideLower - secondsOutsideUpper
            );
        } else {
            return (
                tickCumulativeUpper - tickCumulativeLower,
                secondsPerLiquidityOutsideUpperX128 - secondsPerLiquidityOutsideLowerX128,
                secondsOutsideUpper - secondsOutsideLower
            );
        }
    }
    /// @inheritdoc IUniswapV3PoolDerivedState
    function observe(uint32[] calldata secondsAgos)
        external
        view
        override
        noDelegateCall
        returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s)
    {
        return
            observations.observe(
                _blockTimestamp(),
                secondsAgos,
                slot0.tick,
                slot0.observationIndex,
                liquidity,
                slot0.observationCardinality
            );
    }
    /// @inheritdoc IUniswapV3PoolActions
    function increaseObservationCardinalityNext(uint16 observationCardinalityNext)
        external
        override
        lock
        noDelegateCall
    {
        uint16 observationCardinalityNextOld = slot0.observationCardinalityNext; // for the event
        uint16 observationCardinalityNextNew =
            observations.grow(observationCardinalityNextOld, observationCardinalityNext);
        slot0.observationCardinalityNext = observationCardinalityNextNew;
        if (observationCardinalityNextOld != observationCardinalityNextNew)
            emit IncreaseObservationCardinalityNext(observationCardinalityNextOld, observationCardinalityNextNew);
    }
    /// @inheritdoc IUniswapV3PoolActions
    /// @dev not locked because it initializes unlocked
    function initialize(uint160 sqrtPriceX96) external override {
        require(slot0.sqrtPriceX96 == 0, 'AI');
        int24 tick = TickMath.getTickAtSqrtRatio(sqrtPriceX96);
        (uint16 cardinality, uint16 cardinalityNext) = observations.initialize(_blockTimestamp());
        slot0 = Slot0({
            sqrtPriceX96: sqrtPriceX96,
            tick: tick,
            observationIndex: 0,
            observationCardinality: cardinality,
            observationCardinalityNext: cardinalityNext,
            feeProtocol: 0,
            unlocked: true
        });
        emit Initialize(sqrtPriceX96, tick);
    }
    struct ModifyPositionParams {
        // the address that owns the position
        address owner;
        // the lower and upper tick of the position
        int24 tickLower;
        int24 tickUpper;
        // any change in liquidity
        int128 liquidityDelta;
    }
    /// @dev Effect some changes to a position
    /// @param params the position details and the change to the position's liquidity to effect
    /// @return position a storage pointer referencing the position with the given owner and tick range
    /// @return amount0 the amount of token0 owed to the pool, negative if the pool should pay the recipient
    /// @return amount1 the amount of token1 owed to the pool, negative if the pool should pay the recipient
    function _modifyPosition(ModifyPositionParams memory params)
        private
        noDelegateCall
        returns (
            Position.Info storage position,
            int256 amount0,
            int256 amount1
        )
    {
        checkTicks(params.tickLower, params.tickUpper);
        Slot0 memory _slot0 = slot0; // SLOAD for gas optimization
        position = _updatePosition(
            params.owner,
            params.tickLower,
            params.tickUpper,
            params.liquidityDelta,
            _slot0.tick
        );
        if (params.liquidityDelta != 0) {
            if (_slot0.tick < params.tickLower) {
                // current tick is below the passed range; liquidity can only become in range by crossing from left to
                // right, when we'll need _more_ token0 (it's becoming more valuable) so user must provide it
                amount0 = SqrtPriceMath.getAmount0Delta(
                    TickMath.getSqrtRatioAtTick(params.tickLower),
                    TickMath.getSqrtRatioAtTick(params.tickUpper),
                    params.liquidityDelta
                );
            } else if (_slot0.tick < params.tickUpper) {
                // current tick is inside the passed range
                uint128 liquidityBefore = liquidity; // SLOAD for gas optimization
                // write an oracle entry
                (slot0.observationIndex, slot0.observationCardinality) = observations.write(
                    _slot0.observationIndex,
                    _blockTimestamp(),
                    _slot0.tick,
                    liquidityBefore,
                    _slot0.observationCardinality,
                    _slot0.observationCardinalityNext
                );
                amount0 = SqrtPriceMath.getAmount0Delta(
                    _slot0.sqrtPriceX96,
                    TickMath.getSqrtRatioAtTick(params.tickUpper),
                    params.liquidityDelta
                );
                amount1 = SqrtPriceMath.getAmount1Delta(
                    TickMath.getSqrtRatioAtTick(params.tickLower),
                    _slot0.sqrtPriceX96,
                    params.liquidityDelta
                );
                liquidity = LiquidityMath.addDelta(liquidityBefore, params.liquidityDelta);
            } else {
                // current tick is above the passed range; liquidity can only become in range by crossing from right to
                // left, when we'll need _more_ token1 (it's becoming more valuable) so user must provide it
                amount1 = SqrtPriceMath.getAmount1Delta(
                    TickMath.getSqrtRatioAtTick(params.tickLower),
                    TickMath.getSqrtRatioAtTick(params.tickUpper),
                    params.liquidityDelta
                );
            }
        }
    }
    /// @dev Gets and updates a position with the given liquidity delta
    /// @param owner the owner of the position
    /// @param tickLower the lower tick of the position's tick range
    /// @param tickUpper the upper tick of the position's tick range
    /// @param tick the current tick, passed to avoid sloads
    function _updatePosition(
        address owner,
        int24 tickLower,
        int24 tickUpper,
        int128 liquidityDelta,
        int24 tick
    ) private returns (Position.Info storage position) {
        position = positions.get(owner, tickLower, tickUpper);
        uint256 _feeGrowthGlobal0X128 = feeGrowthGlobal0X128; // SLOAD for gas optimization
        uint256 _feeGrowthGlobal1X128 = feeGrowthGlobal1X128; // SLOAD for gas optimization
        // if we need to update the ticks, do it
        bool flippedLower;
        bool flippedUpper;
        if (liquidityDelta != 0) {
            uint32 time = _blockTimestamp();
            (int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128) =
                observations.observeSingle(
                    time,
                    0,
                    slot0.tick,
                    slot0.observationIndex,
                    liquidity,
                    slot0.observationCardinality
                );
            flippedLower = ticks.update(
                tickLower,
                tick,
                liquidityDelta,
                _feeGrowthGlobal0X128,
                _feeGrowthGlobal1X128,
                secondsPerLiquidityCumulativeX128,
                tickCumulative,
                time,
                false,
                maxLiquidityPerTick
            );
            flippedUpper = ticks.update(
                tickUpper,
                tick,
                liquidityDelta,
                _feeGrowthGlobal0X128,
                _feeGrowthGlobal1X128,
                secondsPerLiquidityCumulativeX128,
                tickCumulative,
                time,
                true,
                maxLiquidityPerTick
            );
            if (flippedLower) {
                tickBitmap.flipTick(tickLower, tickSpacing);
            }
            if (flippedUpper) {
                tickBitmap.flipTick(tickUpper, tickSpacing);
            }
        }
        (uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128) =
            ticks.getFeeGrowthInside(tickLower, tickUpper, tick, _feeGrowthGlobal0X128, _feeGrowthGlobal1X128);
        position.update(liquidityDelta, feeGrowthInside0X128, feeGrowthInside1X128);
        // clear any tick data that is no longer needed
        if (liquidityDelta < 0) {
            if (flippedLower) {
                ticks.clear(tickLower);
            }
            if (flippedUpper) {
                ticks.clear(tickUpper);
            }
        }
    }
    /// @inheritdoc IUniswapV3PoolActions
    /// @dev noDelegateCall is applied indirectly via _modifyPosition
    function mint(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount,
        bytes calldata data
    ) external override lock returns (uint256 amount0, uint256 amount1) {
        require(amount > 0);
        (, int256 amount0Int, int256 amount1Int) =
            _modifyPosition(
                ModifyPositionParams({
                    owner: recipient,
                    tickLower: tickLower,
                    tickUpper: tickUpper,
                    liquidityDelta: int256(amount).toInt128()
                })
            );
        amount0 = uint256(amount0Int);
        amount1 = uint256(amount1Int);
        uint256 balance0Before;
        uint256 balance1Before;
        if (amount0 > 0) balance0Before = balance0();
        if (amount1 > 0) balance1Before = balance1();
        IUniswapV3MintCallback(msg.sender).uniswapV3MintCallback(amount0, amount1, data);
        if (amount0 > 0) require(balance0Before.add(amount0) <= balance0(), 'M0');
        if (amount1 > 0) require(balance1Before.add(amount1) <= balance1(), 'M1');
        emit Mint(msg.sender, recipient, tickLower, tickUpper, amount, amount0, amount1);
    }
    /// @inheritdoc IUniswapV3PoolActions
    function collect(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external override lock returns (uint128 amount0, uint128 amount1) {
        // we don't need to checkTicks here, because invalid positions will never have non-zero tokensOwed{0,1}
        Position.Info storage position = positions.get(msg.sender, tickLower, tickUpper);
        amount0 = amount0Requested > position.tokensOwed0 ? position.tokensOwed0 : amount0Requested;
        amount1 = amount1Requested > position.tokensOwed1 ? position.tokensOwed1 : amount1Requested;
        if (amount0 > 0) {
            position.tokensOwed0 -= amount0;
            TransferHelper.safeTransfer(token0, recipient, amount0);
        }
        if (amount1 > 0) {
            position.tokensOwed1 -= amount1;
            TransferHelper.safeTransfer(token1, recipient, amount1);
        }
        emit Collect(msg.sender, recipient, tickLower, tickUpper, amount0, amount1);
    }
    /// @inheritdoc IUniswapV3PoolActions
    /// @dev noDelegateCall is applied indirectly via _modifyPosition
    function burn(
        int24 tickLower,
        int24 tickUpper,
        uint128 amount
    ) external override lock returns (uint256 amount0, uint256 amount1) {
        (Position.Info storage position, int256 amount0Int, int256 amount1Int) =
            _modifyPosition(
                ModifyPositionParams({
                    owner: msg.sender,
                    tickLower: tickLower,
                    tickUpper: tickUpper,
                    liquidityDelta: -int256(amount).toInt128()
                })
            );
        amount0 = uint256(-amount0Int);
        amount1 = uint256(-amount1Int);
        if (amount0 > 0 || amount1 > 0) {
            (position.tokensOwed0, position.tokensOwed1) = (
                position.tokensOwed0 + uint128(amount0),
                position.tokensOwed1 + uint128(amount1)
            );
        }
        emit Burn(msg.sender, tickLower, tickUpper, amount, amount0, amount1);
    }
    struct SwapCache {
        // the protocol fee for the input token
        uint8 feeProtocol;
        // liquidity at the beginning of the swap
        uint128 liquidityStart;
        // the timestamp of the current block
        uint32 blockTimestamp;
        // the current value of the tick accumulator, computed only if we cross an initialized tick
        int56 tickCumulative;
        // the current value of seconds per liquidity accumulator, computed only if we cross an initialized tick
        uint160 secondsPerLiquidityCumulativeX128;
        // whether we've computed and cached the above two accumulators
        bool computedLatestObservation;
    }
    // the top level state of the swap, the results of which are recorded in storage at the end
    struct SwapState {
        // the amount remaining to be swapped in/out of the input/output asset
        int256 amountSpecifiedRemaining;
        // the amount already swapped out/in of the output/input asset
        int256 amountCalculated;
        // current sqrt(price)
        uint160 sqrtPriceX96;
        // the tick associated with the current price
        int24 tick;
        // the global fee growth of the input token
        uint256 feeGrowthGlobalX128;
        // amount of input token paid as protocol fee
        uint128 protocolFee;
        // the current liquidity in range
        uint128 liquidity;
    }
    struct StepComputations {
        // the price at the beginning of the step
        uint160 sqrtPriceStartX96;
        // the next tick to swap to from the current tick in the swap direction
        int24 tickNext;
        // whether tickNext is initialized or not
        bool initialized;
        // sqrt(price) for the next tick (1/0)
        uint160 sqrtPriceNextX96;
        // how much is being swapped in in this step
        uint256 amountIn;
        // how much is being swapped out
        uint256 amountOut;
        // how much fee is being paid in
        uint256 feeAmount;
    }
    /// @inheritdoc IUniswapV3PoolActions
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external override noDelegateCall returns (int256 amount0, int256 amount1) {
        require(amountSpecified != 0, 'AS');
        Slot0 memory slot0Start = slot0;
        require(slot0Start.unlocked, 'LOK');
        require(
            zeroForOne
                ? sqrtPriceLimitX96 < slot0Start.sqrtPriceX96 && sqrtPriceLimitX96 > TickMath.MIN_SQRT_RATIO
                : sqrtPriceLimitX96 > slot0Start.sqrtPriceX96 && sqrtPriceLimitX96 < TickMath.MAX_SQRT_RATIO,
            'SPL'
        );
        slot0.unlocked = false;
        SwapCache memory cache =
            SwapCache({
                liquidityStart: liquidity,
                blockTimestamp: _blockTimestamp(),
                feeProtocol: zeroForOne ? (slot0Start.feeProtocol % 16) : (slot0Start.feeProtocol >> 4),
                secondsPerLiquidityCumulativeX128: 0,
                tickCumulative: 0,
                computedLatestObservation: false
            });
        bool exactInput = amountSpecified > 0;
        SwapState memory state =
            SwapState({
                amountSpecifiedRemaining: amountSpecified,
                amountCalculated: 0,
                sqrtPriceX96: slot0Start.sqrtPriceX96,
                tick: slot0Start.tick,
                feeGrowthGlobalX128: zeroForOne ? feeGrowthGlobal0X128 : feeGrowthGlobal1X128,
                protocolFee: 0,
                liquidity: cache.liquidityStart
            });
        // continue swapping as long as we haven't used the entire input/output and haven't reached the price limit
        while (state.amountSpecifiedRemaining != 0 && state.sqrtPriceX96 != sqrtPriceLimitX96) {
            StepComputations memory step;
            step.sqrtPriceStartX96 = state.sqrtPriceX96;
            (step.tickNext, step.initialized) = tickBitmap.nextInitializedTickWithinOneWord(
                state.tick,
                tickSpacing,
                zeroForOne
            );
            // ensure that we do not overshoot the min/max tick, as the tick bitmap is not aware of these bounds
            if (step.tickNext < TickMath.MIN_TICK) {
                step.tickNext = TickMath.MIN_TICK;
            } else if (step.tickNext > TickMath.MAX_TICK) {
                step.tickNext = TickMath.MAX_TICK;
            }
            // get the price for the next tick
            step.sqrtPriceNextX96 = TickMath.getSqrtRatioAtTick(step.tickNext);
            // compute values to swap to the target tick, price limit, or point where input/output amount is exhausted
            (state.sqrtPriceX96, step.amountIn, step.amountOut, step.feeAmount) = SwapMath.computeSwapStep(
                state.sqrtPriceX96,
                (zeroForOne ? step.sqrtPriceNextX96 < sqrtPriceLimitX96 : step.sqrtPriceNextX96 > sqrtPriceLimitX96)
                    ? sqrtPriceLimitX96
                    : step.sqrtPriceNextX96,
                state.liquidity,
                state.amountSpecifiedRemaining,
                fee
            );
            if (exactInput) {
                state.amountSpecifiedRemaining -= (step.amountIn + step.feeAmount).toInt256();
                state.amountCalculated = state.amountCalculated.sub(step.amountOut.toInt256());
            } else {
                state.amountSpecifiedRemaining += step.amountOut.toInt256();
                state.amountCalculated = state.amountCalculated.add((step.amountIn + step.feeAmount).toInt256());
            }
            // if the protocol fee is on, calculate how much is owed, decrement feeAmount, and increment protocolFee
            if (cache.feeProtocol > 0) {
                uint256 delta = step.feeAmount / cache.feeProtocol;
                step.feeAmount -= delta;
                state.protocolFee += uint128(delta);
            }
            // update global fee tracker
            if (state.liquidity > 0)
                state.feeGrowthGlobalX128 += FullMath.mulDiv(step.feeAmount, FixedPoint128.Q128, state.liquidity);
            // shift tick if we reached the next price
            if (state.sqrtPriceX96 == step.sqrtPriceNextX96) {
                // if the tick is initialized, run the tick transition
                if (step.initialized) {
                    // check for the placeholder value, which we replace with the actual value the first time the swap
                    // crosses an initialized tick
                    if (!cache.computedLatestObservation) {
                        (cache.tickCumulative, cache.secondsPerLiquidityCumulativeX128) = observations.observeSingle(
                            cache.blockTimestamp,
                            0,
                            slot0Start.tick,
                            slot0Start.observationIndex,
                            cache.liquidityStart,
                            slot0Start.observationCardinality
                        );
                        cache.computedLatestObservation = true;
                    }
                    int128 liquidityNet =
                        ticks.cross(
                            step.tickNext,
                            (zeroForOne ? state.feeGrowthGlobalX128 : feeGrowthGlobal0X128),
                            (zeroForOne ? feeGrowthGlobal1X128 : state.feeGrowthGlobalX128),
                            cache.secondsPerLiquidityCumulativeX128,
                            cache.tickCumulative,
                            cache.blockTimestamp
                        );
                    // if we're moving leftward, we interpret liquidityNet as the opposite sign
                    // safe because liquidityNet cannot be type(int128).min
                    if (zeroForOne) liquidityNet = -liquidityNet;
                    state.liquidity = LiquidityMath.addDelta(state.liquidity, liquidityNet);
                }
                state.tick = zeroForOne ? step.tickNext - 1 : step.tickNext;
            } else if (state.sqrtPriceX96 != step.sqrtPriceStartX96) {
                // recompute unless we're on a lower tick boundary (i.e. already transitioned ticks), and haven't moved
                state.tick = TickMath.getTickAtSqrtRatio(state.sqrtPriceX96);
            }
        }
        // update tick and write an oracle entry if the tick change
        if (state.tick != slot0Start.tick) {
            (uint16 observationIndex, uint16 observationCardinality) =
                observations.write(
                    slot0Start.observationIndex,
                    cache.blockTimestamp,
                    slot0Start.tick,
                    cache.liquidityStart,
                    slot0Start.observationCardinality,
                    slot0Start.observationCardinalityNext
                );
            (slot0.sqrtPriceX96, slot0.tick, slot0.observationIndex, slot0.observationCardinality) = (
                state.sqrtPriceX96,
                state.tick,
                observationIndex,
                observationCardinality
            );
        } else {
            // otherwise just update the price
            slot0.sqrtPriceX96 = state.sqrtPriceX96;
        }
        // update liquidity if it changed
        if (cache.liquidityStart != state.liquidity) liquidity = state.liquidity;
        // update fee growth global and, if necessary, protocol fees
        // overflow is acceptable, protocol has to withdraw before it hits type(uint128).max fees
        if (zeroForOne) {
            feeGrowthGlobal0X128 = state.feeGrowthGlobalX128;
            if (state.protocolFee > 0) protocolFees.token0 += state.protocolFee;
        } else {
            feeGrowthGlobal1X128 = state.feeGrowthGlobalX128;
            if (state.protocolFee > 0) protocolFees.token1 += state.protocolFee;
        }
        (amount0, amount1) = zeroForOne == exactInput
            ? (amountSpecified - state.amountSpecifiedRemaining, state.amountCalculated)
            : (state.amountCalculated, amountSpecified - state.amountSpecifiedRemaining);
        // do the transfers and collect payment
        if (zeroForOne) {
            if (amount1 < 0) TransferHelper.safeTransfer(token1, recipient, uint256(-amount1));
            uint256 balance0Before = balance0();
            IUniswapV3SwapCallback(msg.sender).uniswapV3SwapCallback(amount0, amount1, data);
            require(balance0Before.add(uint256(amount0)) <= balance0(), 'IIA');
        } else {
            if (amount0 < 0) TransferHelper.safeTransfer(token0, recipient, uint256(-amount0));
            uint256 balance1Before = balance1();
            IUniswapV3SwapCallback(msg.sender).uniswapV3SwapCallback(amount0, amount1, data);
            require(balance1Before.add(uint256(amount1)) <= balance1(), 'IIA');
        }
        emit Swap(msg.sender, recipient, amount0, amount1, state.sqrtPriceX96, state.liquidity, state.tick);
        slot0.unlocked = true;
    }
    /// @inheritdoc IUniswapV3PoolActions
    function flash(
        address recipient,
        uint256 amount0,
        uint256 amount1,
        bytes calldata data
    ) external override lock noDelegateCall {
        uint128 _liquidity = liquidity;
        require(_liquidity > 0, 'L');
        uint256 fee0 = FullMath.mulDivRoundingUp(amount0, fee, 1e6);
        uint256 fee1 = FullMath.mulDivRoundingUp(amount1, fee, 1e6);
        uint256 balance0Before = balance0();
        uint256 balance1Before = balance1();
        if (amount0 > 0) TransferHelper.safeTransfer(token0, recipient, amount0);
        if (amount1 > 0) TransferHelper.safeTransfer(token1, recipient, amount1);
        IUniswapV3FlashCallback(msg.sender).uniswapV3FlashCallback(fee0, fee1, data);
        uint256 balance0After = balance0();
        uint256 balance1After = balance1();
        require(balance0Before.add(fee0) <= balance0After, 'F0');
        require(balance1Before.add(fee1) <= balance1After, 'F1');
        // sub is safe because we know balanceAfter is gt balanceBefore by at least fee
        uint256 paid0 = balance0After - balance0Before;
        uint256 paid1 = balance1After - balance1Before;
        if (paid0 > 0) {
            uint8 feeProtocol0 = slot0.feeProtocol % 16;
            uint256 fees0 = feeProtocol0 == 0 ? 0 : paid0 / feeProtocol0;
            if (uint128(fees0) > 0) protocolFees.token0 += uint128(fees0);
            feeGrowthGlobal0X128 += FullMath.mulDiv(paid0 - fees0, FixedPoint128.Q128, _liquidity);
        }
        if (paid1 > 0) {
            uint8 feeProtocol1 = slot0.feeProtocol >> 4;
            uint256 fees1 = feeProtocol1 == 0 ? 0 : paid1 / feeProtocol1;
            if (uint128(fees1) > 0) protocolFees.token1 += uint128(fees1);
            feeGrowthGlobal1X128 += FullMath.mulDiv(paid1 - fees1, FixedPoint128.Q128, _liquidity);
        }
        emit Flash(msg.sender, recipient, amount0, amount1, paid0, paid1);
    }
    /// @inheritdoc IUniswapV3PoolOwnerActions
    function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external override lock onlyFactoryOwner {
        require(
            (feeProtocol0 == 0 || (feeProtocol0 >= 4 && feeProtocol0 <= 10)) &&
                (feeProtocol1 == 0 || (feeProtocol1 >= 4 && feeProtocol1 <= 10))
        );
        uint8 feeProtocolOld = slot0.feeProtocol;
        slot0.feeProtocol = feeProtocol0 + (feeProtocol1 << 4);
        emit SetFeeProtocol(feeProtocolOld % 16, feeProtocolOld >> 4, feeProtocol0, feeProtocol1);
    }
    /// @inheritdoc IUniswapV3PoolOwnerActions
    function collectProtocol(
        address recipient,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external override lock onlyFactoryOwner returns (uint128 amount0, uint128 amount1) {
        amount0 = amount0Requested > protocolFees.token0 ? protocolFees.token0 : amount0Requested;
        amount1 = amount1Requested > protocolFees.token1 ? protocolFees.token1 : amount1Requested;
        if (amount0 > 0) {
            if (amount0 == protocolFees.token0) amount0--; // ensure that the slot is not cleared, for gas savings
            protocolFees.token0 -= amount0;
            TransferHelper.safeTransfer(token0, recipient, amount0);
        }
        if (amount1 > 0) {
            if (amount1 == protocolFees.token1) amount1--; // ensure that the slot is not cleared, for gas savings
            protocolFees.token1 -= amount1;
            TransferHelper.safeTransfer(token1, recipient, amount1);
        }
        emit CollectProtocol(msg.sender, recipient, amount0, amount1);
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import './pool/IUniswapV3PoolImmutables.sol';
import './pool/IUniswapV3PoolState.sol';
import './pool/IUniswapV3PoolDerivedState.sol';
import './pool/IUniswapV3PoolActions.sol';
import './pool/IUniswapV3PoolOwnerActions.sol';
import './pool/IUniswapV3PoolEvents.sol';
/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
    IUniswapV3PoolImmutables,
    IUniswapV3PoolState,
    IUniswapV3PoolDerivedState,
    IUniswapV3PoolActions,
    IUniswapV3PoolOwnerActions,
    IUniswapV3PoolEvents
{
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.7.6;
/// @title Prevents delegatecall to a contract
/// @notice Base contract that provides a modifier for preventing delegatecall to methods in a child contract
abstract contract NoDelegateCall {
    /// @dev The original address of this contract
    address private immutable original;
    constructor() {
        // Immutables are computed in the init code of the contract, and then inlined into the deployed bytecode.
        // In other words, this variable won't change when it's checked at runtime.
        original = address(this);
    }
    /// @dev Private method is used instead of inlining into modifier because modifiers are copied into each method,
    ///     and the use of immutable means the address bytes are copied in every place the modifier is used.
    function checkNotDelegateCall() private view {
        require(address(this) == original);
    }
    /// @notice Prevents delegatecall into the modified method
    modifier noDelegateCall() {
        checkNotDelegateCall();
        _;
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.0;
/// @title Optimized overflow and underflow safe math operations
/// @notice Contains methods for doing math operations that revert on overflow or underflow for minimal gas cost
library LowGasSafeMath {
    /// @notice Returns x + y, reverts if sum overflows uint256
    /// @param x The augend
    /// @param y The addend
    /// @return z The sum of x and y
    function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
        require((z = x + y) >= x);
    }
    /// @notice Returns x - y, reverts if underflows
    /// @param x The minuend
    /// @param y The subtrahend
    /// @return z The difference of x and y
    function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
        require((z = x - y) <= x);
    }
    /// @notice Returns x * y, reverts if overflows
    /// @param x The multiplicand
    /// @param y The multiplier
    /// @return z The product of x and y
    function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
        require(x == 0 || (z = x * y) / x == y);
    }
    /// @notice Returns x + y, reverts if overflows or underflows
    /// @param x The augend
    /// @param y The addend
    /// @return z The sum of x and y
    function add(int256 x, int256 y) internal pure returns (int256 z) {
        require((z = x + y) >= x == (y >= 0));
    }
    /// @notice Returns x - y, reverts if overflows or underflows
    /// @param x The minuend
    /// @param y The subtrahend
    /// @return z The difference of x and y
    function sub(int256 x, int256 y) internal pure returns (int256 z) {
        require((z = x - y) <= x == (y >= 0));
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
library SafeCast {
    /// @notice Cast a uint256 to a uint160, revert on overflow
    /// @param y The uint256 to be downcasted
    /// @return z The downcasted integer, now type uint160
    function toUint160(uint256 y) internal pure returns (uint160 z) {
        require((z = uint160(y)) == y);
    }
    /// @notice Cast a int256 to a int128, revert on overflow or underflow
    /// @param y The int256 to be downcasted
    /// @return z The downcasted integer, now type int128
    function toInt128(int256 y) internal pure returns (int128 z) {
        require((z = int128(y)) == y);
    }
    /// @notice Cast a uint256 to a int256, revert on overflow
    /// @param y The uint256 to be casted
    /// @return z The casted integer, now type int256
    function toInt256(uint256 y) internal pure returns (int256 z) {
        require(y < 2**255);
        z = int256(y);
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './LowGasSafeMath.sol';
import './SafeCast.sol';
import './TickMath.sol';
import './LiquidityMath.sol';
/// @title Tick
/// @notice Contains functions for managing tick processes and relevant calculations
library Tick {
    using LowGasSafeMath for int256;
    using SafeCast for int256;
    // info stored for each initialized individual tick
    struct Info {
        // the total position liquidity that references this tick
        uint128 liquidityGross;
        // amount of net liquidity added (subtracted) when tick is crossed from left to right (right to left),
        int128 liquidityNet;
        // fee growth per unit of liquidity on the _other_ side of this tick (relative to the current tick)
        // only has relative meaning, not absolute — the value depends on when the tick is initialized
        uint256 feeGrowthOutside0X128;
        uint256 feeGrowthOutside1X128;
        // the cumulative tick value on the other side of the tick
        int56 tickCumulativeOutside;
        // the seconds per unit of liquidity on the _other_ side of this tick (relative to the current tick)
        // only has relative meaning, not absolute — the value depends on when the tick is initialized
        uint160 secondsPerLiquidityOutsideX128;
        // the seconds spent on the other side of the tick (relative to the current tick)
        // only has relative meaning, not absolute — the value depends on when the tick is initialized
        uint32 secondsOutside;
        // true iff the tick is initialized, i.e. the value is exactly equivalent to the expression liquidityGross != 0
        // these 8 bits are set to prevent fresh sstores when crossing newly initialized ticks
        bool initialized;
    }
    /// @notice Derives max liquidity per tick from given tick spacing
    /// @dev Executed within the pool constructor
    /// @param tickSpacing The amount of required tick separation, realized in multiples of `tickSpacing`
    ///     e.g., a tickSpacing of 3 requires ticks to be initialized every 3rd tick i.e., ..., -6, -3, 0, 3, 6, ...
    /// @return The max liquidity per tick
    function tickSpacingToMaxLiquidityPerTick(int24 tickSpacing) internal pure returns (uint128) {
        int24 minTick = (TickMath.MIN_TICK / tickSpacing) * tickSpacing;
        int24 maxTick = (TickMath.MAX_TICK / tickSpacing) * tickSpacing;
        uint24 numTicks = uint24((maxTick - minTick) / tickSpacing) + 1;
        return type(uint128).max / numTicks;
    }
    /// @notice Retrieves fee growth data
    /// @param self The mapping containing all tick information for initialized ticks
    /// @param tickLower The lower tick boundary of the position
    /// @param tickUpper The upper tick boundary of the position
    /// @param tickCurrent The current tick
    /// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
    /// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
    /// @return feeGrowthInside0X128 The all-time fee growth in token0, per unit of liquidity, inside the position's tick boundaries
    /// @return feeGrowthInside1X128 The all-time fee growth in token1, per unit of liquidity, inside the position's tick boundaries
    function getFeeGrowthInside(
        mapping(int24 => Tick.Info) storage self,
        int24 tickLower,
        int24 tickUpper,
        int24 tickCurrent,
        uint256 feeGrowthGlobal0X128,
        uint256 feeGrowthGlobal1X128
    ) internal view returns (uint256 feeGrowthInside0X128, uint256 feeGrowthInside1X128) {
        Info storage lower = self[tickLower];
        Info storage upper = self[tickUpper];
        // calculate fee growth below
        uint256 feeGrowthBelow0X128;
        uint256 feeGrowthBelow1X128;
        if (tickCurrent >= tickLower) {
            feeGrowthBelow0X128 = lower.feeGrowthOutside0X128;
            feeGrowthBelow1X128 = lower.feeGrowthOutside1X128;
        } else {
            feeGrowthBelow0X128 = feeGrowthGlobal0X128 - lower.feeGrowthOutside0X128;
            feeGrowthBelow1X128 = feeGrowthGlobal1X128 - lower.feeGrowthOutside1X128;
        }
        // calculate fee growth above
        uint256 feeGrowthAbove0X128;
        uint256 feeGrowthAbove1X128;
        if (tickCurrent < tickUpper) {
            feeGrowthAbove0X128 = upper.feeGrowthOutside0X128;
            feeGrowthAbove1X128 = upper.feeGrowthOutside1X128;
        } else {
            feeGrowthAbove0X128 = feeGrowthGlobal0X128 - upper.feeGrowthOutside0X128;
            feeGrowthAbove1X128 = feeGrowthGlobal1X128 - upper.feeGrowthOutside1X128;
        }
        feeGrowthInside0X128 = feeGrowthGlobal0X128 - feeGrowthBelow0X128 - feeGrowthAbove0X128;
        feeGrowthInside1X128 = feeGrowthGlobal1X128 - feeGrowthBelow1X128 - feeGrowthAbove1X128;
    }
    /// @notice Updates a tick and returns true if the tick was flipped from initialized to uninitialized, or vice versa
    /// @param self The mapping containing all tick information for initialized ticks
    /// @param tick The tick that will be updated
    /// @param tickCurrent The current tick
    /// @param liquidityDelta A new amount of liquidity to be added (subtracted) when tick is crossed from left to right (right to left)
    /// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
    /// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
    /// @param secondsPerLiquidityCumulativeX128 The all-time seconds per max(1, liquidity) of the pool
    /// @param time The current block timestamp cast to a uint32
    /// @param upper true for updating a position's upper tick, or false for updating a position's lower tick
    /// @param maxLiquidity The maximum liquidity allocation for a single tick
    /// @return flipped Whether the tick was flipped from initialized to uninitialized, or vice versa
    function update(
        mapping(int24 => Tick.Info) storage self,
        int24 tick,
        int24 tickCurrent,
        int128 liquidityDelta,
        uint256 feeGrowthGlobal0X128,
        uint256 feeGrowthGlobal1X128,
        uint160 secondsPerLiquidityCumulativeX128,
        int56 tickCumulative,
        uint32 time,
        bool upper,
        uint128 maxLiquidity
    ) internal returns (bool flipped) {
        Tick.Info storage info = self[tick];
        uint128 liquidityGrossBefore = info.liquidityGross;
        uint128 liquidityGrossAfter = LiquidityMath.addDelta(liquidityGrossBefore, liquidityDelta);
        require(liquidityGrossAfter <= maxLiquidity, 'LO');
        flipped = (liquidityGrossAfter == 0) != (liquidityGrossBefore == 0);
        if (liquidityGrossBefore == 0) {
            // by convention, we assume that all growth before a tick was initialized happened _below_ the tick
            if (tick <= tickCurrent) {
                info.feeGrowthOutside0X128 = feeGrowthGlobal0X128;
                info.feeGrowthOutside1X128 = feeGrowthGlobal1X128;
                info.secondsPerLiquidityOutsideX128 = secondsPerLiquidityCumulativeX128;
                info.tickCumulativeOutside = tickCumulative;
                info.secondsOutside = time;
            }
            info.initialized = true;
        }
        info.liquidityGross = liquidityGrossAfter;
        // when the lower (upper) tick is crossed left to right (right to left), liquidity must be added (removed)
        info.liquidityNet = upper
            ? int256(info.liquidityNet).sub(liquidityDelta).toInt128()
            : int256(info.liquidityNet).add(liquidityDelta).toInt128();
    }
    /// @notice Clears tick data
    /// @param self The mapping containing all initialized tick information for initialized ticks
    /// @param tick The tick that will be cleared
    function clear(mapping(int24 => Tick.Info) storage self, int24 tick) internal {
        delete self[tick];
    }
    /// @notice Transitions to next tick as needed by price movement
    /// @param self The mapping containing all tick information for initialized ticks
    /// @param tick The destination tick of the transition
    /// @param feeGrowthGlobal0X128 The all-time global fee growth, per unit of liquidity, in token0
    /// @param feeGrowthGlobal1X128 The all-time global fee growth, per unit of liquidity, in token1
    /// @param secondsPerLiquidityCumulativeX128 The current seconds per liquidity
    /// @param time The current block.timestamp
    /// @return liquidityNet The amount of liquidity added (subtracted) when tick is crossed from left to right (right to left)
    function cross(
        mapping(int24 => Tick.Info) storage self,
        int24 tick,
        uint256 feeGrowthGlobal0X128,
        uint256 feeGrowthGlobal1X128,
        uint160 secondsPerLiquidityCumulativeX128,
        int56 tickCumulative,
        uint32 time
    ) internal returns (int128 liquidityNet) {
        Tick.Info storage info = self[tick];
        info.feeGrowthOutside0X128 = feeGrowthGlobal0X128 - info.feeGrowthOutside0X128;
        info.feeGrowthOutside1X128 = feeGrowthGlobal1X128 - info.feeGrowthOutside1X128;
        info.secondsPerLiquidityOutsideX128 = secondsPerLiquidityCumulativeX128 - info.secondsPerLiquidityOutsideX128;
        info.tickCumulativeOutside = tickCumulative - info.tickCumulativeOutside;
        info.secondsOutside = time - info.secondsOutside;
        liquidityNet = info.liquidityNet;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './BitMath.sol';
/// @title Packed tick initialized state library
/// @notice Stores a packed mapping of tick index to its initialized state
/// @dev The mapping uses int16 for keys since ticks are represented as int24 and there are 256 (2^8) values per word.
library TickBitmap {
    /// @notice Computes the position in the mapping where the initialized bit for a tick lives
    /// @param tick The tick for which to compute the position
    /// @return wordPos The key in the mapping containing the word in which the bit is stored
    /// @return bitPos The bit position in the word where the flag is stored
    function position(int24 tick) private pure returns (int16 wordPos, uint8 bitPos) {
        wordPos = int16(tick >> 8);
        bitPos = uint8(tick % 256);
    }
    /// @notice Flips the initialized state for a given tick from false to true, or vice versa
    /// @param self The mapping in which to flip the tick
    /// @param tick The tick to flip
    /// @param tickSpacing The spacing between usable ticks
    function flipTick(
        mapping(int16 => uint256) storage self,
        int24 tick,
        int24 tickSpacing
    ) internal {
        require(tick % tickSpacing == 0); // ensure that the tick is spaced
        (int16 wordPos, uint8 bitPos) = position(tick / tickSpacing);
        uint256 mask = 1 << bitPos;
        self[wordPos] ^= mask;
    }
    /// @notice Returns the next initialized tick contained in the same word (or adjacent word) as the tick that is either
    /// to the left (less than or equal to) or right (greater than) of the given tick
    /// @param self The mapping in which to compute the next initialized tick
    /// @param tick The starting tick
    /// @param tickSpacing The spacing between usable ticks
    /// @param lte Whether to search for the next initialized tick to the left (less than or equal to the starting tick)
    /// @return next The next initialized or uninitialized tick up to 256 ticks away from the current tick
    /// @return initialized Whether the next tick is initialized, as the function only searches within up to 256 ticks
    function nextInitializedTickWithinOneWord(
        mapping(int16 => uint256) storage self,
        int24 tick,
        int24 tickSpacing,
        bool lte
    ) internal view returns (int24 next, bool initialized) {
        int24 compressed = tick / tickSpacing;
        if (tick < 0 && tick % tickSpacing != 0) compressed--; // round towards negative infinity
        if (lte) {
            (int16 wordPos, uint8 bitPos) = position(compressed);
            // all the 1s at or to the right of the current bitPos
            uint256 mask = (1 << bitPos) - 1 + (1 << bitPos);
            uint256 masked = self[wordPos] & mask;
            // if there are no initialized ticks to the right of or at the current tick, return rightmost in the word
            initialized = masked != 0;
            // overflow/underflow is possible, but prevented externally by limiting both tickSpacing and tick
            next = initialized
                ? (compressed - int24(bitPos - BitMath.mostSignificantBit(masked))) * tickSpacing
                : (compressed - int24(bitPos)) * tickSpacing;
        } else {
            // start from the word of the next tick, since the current tick state doesn't matter
            (int16 wordPos, uint8 bitPos) = position(compressed + 1);
            // all the 1s at or to the left of the bitPos
            uint256 mask = ~((1 << bitPos) - 1);
            uint256 masked = self[wordPos] & mask;
            // if there are no initialized ticks to the left of the current tick, return leftmost in the word
            initialized = masked != 0;
            // overflow/underflow is possible, but prevented externally by limiting both tickSpacing and tick
            next = initialized
                ? (compressed + 1 + int24(BitMath.leastSignificantBit(masked) - bitPos)) * tickSpacing
                : (compressed + 1 + int24(type(uint8).max - bitPos)) * tickSpacing;
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './FullMath.sol';
import './FixedPoint128.sol';
import './LiquidityMath.sol';
/// @title Position
/// @notice Positions represent an owner address' liquidity between a lower and upper tick boundary
/// @dev Positions store additional state for tracking fees owed to the position
library Position {
    // info stored for each user's position
    struct Info {
        // the amount of liquidity owned by this position
        uint128 liquidity;
        // fee growth per unit of liquidity as of the last update to liquidity or fees owed
        uint256 feeGrowthInside0LastX128;
        uint256 feeGrowthInside1LastX128;
        // the fees owed to the position owner in token0/token1
        uint128 tokensOwed0;
        uint128 tokensOwed1;
    }
    /// @notice Returns the Info struct of a position, given an owner and position boundaries
    /// @param self The mapping containing all user positions
    /// @param owner The address of the position owner
    /// @param tickLower The lower tick boundary of the position
    /// @param tickUpper The upper tick boundary of the position
    /// @return position The position info struct of the given owners' position
    function get(
        mapping(bytes32 => Info) storage self,
        address owner,
        int24 tickLower,
        int24 tickUpper
    ) internal view returns (Position.Info storage position) {
        position = self[keccak256(abi.encodePacked(owner, tickLower, tickUpper))];
    }
    /// @notice Credits accumulated fees to a user's position
    /// @param self The individual position to update
    /// @param liquidityDelta The change in pool liquidity as a result of the position update
    /// @param feeGrowthInside0X128 The all-time fee growth in token0, per unit of liquidity, inside the position's tick boundaries
    /// @param feeGrowthInside1X128 The all-time fee growth in token1, per unit of liquidity, inside the position's tick boundaries
    function update(
        Info storage self,
        int128 liquidityDelta,
        uint256 feeGrowthInside0X128,
        uint256 feeGrowthInside1X128
    ) internal {
        Info memory _self = self;
        uint128 liquidityNext;
        if (liquidityDelta == 0) {
            require(_self.liquidity > 0, 'NP'); // disallow pokes for 0 liquidity positions
            liquidityNext = _self.liquidity;
        } else {
            liquidityNext = LiquidityMath.addDelta(_self.liquidity, liquidityDelta);
        }
        // calculate accumulated fees
        uint128 tokensOwed0 =
            uint128(
                FullMath.mulDiv(
                    feeGrowthInside0X128 - _self.feeGrowthInside0LastX128,
                    _self.liquidity,
                    FixedPoint128.Q128
                )
            );
        uint128 tokensOwed1 =
            uint128(
                FullMath.mulDiv(
                    feeGrowthInside1X128 - _self.feeGrowthInside1LastX128,
                    _self.liquidity,
                    FixedPoint128.Q128
                )
            );
        // update the position
        if (liquidityDelta != 0) self.liquidity = liquidityNext;
        self.feeGrowthInside0LastX128 = feeGrowthInside0X128;
        self.feeGrowthInside1LastX128 = feeGrowthInside1X128;
        if (tokensOwed0 > 0 || tokensOwed1 > 0) {
            // overflow is acceptable, have to withdraw before you hit type(uint128).max fees
            self.tokensOwed0 += tokensOwed0;
            self.tokensOwed1 += tokensOwed1;
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
/// @title Oracle
/// @notice Provides price and liquidity data useful for a wide variety of system designs
/// @dev Instances of stored oracle data, "observations", are collected in the oracle array
/// Every pool is initialized with an oracle array length of 1. Anyone can pay the SSTOREs to increase the
/// maximum length of the oracle array. New slots will be added when the array is fully populated.
/// Observations are overwritten when the full length of the oracle array is populated.
/// The most recent observation is available, independent of the length of the oracle array, by passing 0 to observe()
library Oracle {
    struct Observation {
        // the block timestamp of the observation
        uint32 blockTimestamp;
        // the tick accumulator, i.e. tick * time elapsed since the pool was first initialized
        int56 tickCumulative;
        // the seconds per liquidity, i.e. seconds elapsed / max(1, liquidity) since the pool was first initialized
        uint160 secondsPerLiquidityCumulativeX128;
        // whether or not the observation is initialized
        bool initialized;
    }
    /// @notice Transforms a previous observation into a new observation, given the passage of time and the current tick and liquidity values
    /// @dev blockTimestamp _must_ be chronologically equal to or greater than last.blockTimestamp, safe for 0 or 1 overflows
    /// @param last The specified observation to be transformed
    /// @param blockTimestamp The timestamp of the new observation
    /// @param tick The active tick at the time of the new observation
    /// @param liquidity The total in-range liquidity at the time of the new observation
    /// @return Observation The newly populated observation
    function transform(
        Observation memory last,
        uint32 blockTimestamp,
        int24 tick,
        uint128 liquidity
    ) private pure returns (Observation memory) {
        uint32 delta = blockTimestamp - last.blockTimestamp;
        return
            Observation({
                blockTimestamp: blockTimestamp,
                tickCumulative: last.tickCumulative + int56(tick) * delta,
                secondsPerLiquidityCumulativeX128: last.secondsPerLiquidityCumulativeX128 +
                    ((uint160(delta) << 128) / (liquidity > 0 ? liquidity : 1)),
                initialized: true
            });
    }
    /// @notice Initialize the oracle array by writing the first slot. Called once for the lifecycle of the observations array
    /// @param self The stored oracle array
    /// @param time The time of the oracle initialization, via block.timestamp truncated to uint32
    /// @return cardinality The number of populated elements in the oracle array
    /// @return cardinalityNext The new length of the oracle array, independent of population
    function initialize(Observation[65535] storage self, uint32 time)
        internal
        returns (uint16 cardinality, uint16 cardinalityNext)
    {
        self[0] = Observation({
            blockTimestamp: time,
            tickCumulative: 0,
            secondsPerLiquidityCumulativeX128: 0,
            initialized: true
        });
        return (1, 1);
    }
    /// @notice Writes an oracle observation to the array
    /// @dev Writable at most once per block. Index represents the most recently written element. cardinality and index must be tracked externally.
    /// If the index is at the end of the allowable array length (according to cardinality), and the next cardinality
    /// is greater than the current one, cardinality may be increased. This restriction is created to preserve ordering.
    /// @param self The stored oracle array
    /// @param index The index of the observation that was most recently written to the observations array
    /// @param blockTimestamp The timestamp of the new observation
    /// @param tick The active tick at the time of the new observation
    /// @param liquidity The total in-range liquidity at the time of the new observation
    /// @param cardinality The number of populated elements in the oracle array
    /// @param cardinalityNext The new length of the oracle array, independent of population
    /// @return indexUpdated The new index of the most recently written element in the oracle array
    /// @return cardinalityUpdated The new cardinality of the oracle array
    function write(
        Observation[65535] storage self,
        uint16 index,
        uint32 blockTimestamp,
        int24 tick,
        uint128 liquidity,
        uint16 cardinality,
        uint16 cardinalityNext
    ) internal returns (uint16 indexUpdated, uint16 cardinalityUpdated) {
        Observation memory last = self[index];
        // early return if we've already written an observation this block
        if (last.blockTimestamp == blockTimestamp) return (index, cardinality);
        // if the conditions are right, we can bump the cardinality
        if (cardinalityNext > cardinality && index == (cardinality - 1)) {
            cardinalityUpdated = cardinalityNext;
        } else {
            cardinalityUpdated = cardinality;
        }
        indexUpdated = (index + 1) % cardinalityUpdated;
        self[indexUpdated] = transform(last, blockTimestamp, tick, liquidity);
    }
    /// @notice Prepares the oracle array to store up to `next` observations
    /// @param self The stored oracle array
    /// @param current The current next cardinality of the oracle array
    /// @param next The proposed next cardinality which will be populated in the oracle array
    /// @return next The next cardinality which will be populated in the oracle array
    function grow(
        Observation[65535] storage self,
        uint16 current,
        uint16 next
    ) internal returns (uint16) {
        require(current > 0, 'I');
        // no-op if the passed next value isn't greater than the current next value
        if (next <= current) return current;
        // store in each slot to prevent fresh SSTOREs in swaps
        // this data will not be used because the initialized boolean is still false
        for (uint16 i = current; i < next; i++) self[i].blockTimestamp = 1;
        return next;
    }
    /// @notice comparator for 32-bit timestamps
    /// @dev safe for 0 or 1 overflows, a and b _must_ be chronologically before or equal to time
    /// @param time A timestamp truncated to 32 bits
    /// @param a A comparison timestamp from which to determine the relative position of `time`
    /// @param b From which to determine the relative position of `time`
    /// @return bool Whether `a` is chronologically <= `b`
    function lte(
        uint32 time,
        uint32 a,
        uint32 b
    ) private pure returns (bool) {
        // if there hasn't been overflow, no need to adjust
        if (a <= time && b <= time) return a <= b;
        uint256 aAdjusted = a > time ? a : a + 2**32;
        uint256 bAdjusted = b > time ? b : b + 2**32;
        return aAdjusted <= bAdjusted;
    }
    /// @notice Fetches the observations beforeOrAt and atOrAfter a target, i.e. where [beforeOrAt, atOrAfter] is satisfied.
    /// The result may be the same observation, or adjacent observations.
    /// @dev The answer must be contained in the array, used when the target is located within the stored observation
    /// boundaries: older than the most recent observation and younger, or the same age as, the oldest observation
    /// @param self The stored oracle array
    /// @param time The current block.timestamp
    /// @param target The timestamp at which the reserved observation should be for
    /// @param index The index of the observation that was most recently written to the observations array
    /// @param cardinality The number of populated elements in the oracle array
    /// @return beforeOrAt The observation recorded before, or at, the target
    /// @return atOrAfter The observation recorded at, or after, the target
    function binarySearch(
        Observation[65535] storage self,
        uint32 time,
        uint32 target,
        uint16 index,
        uint16 cardinality
    ) private view returns (Observation memory beforeOrAt, Observation memory atOrAfter) {
        uint256 l = (index + 1) % cardinality; // oldest observation
        uint256 r = l + cardinality - 1; // newest observation
        uint256 i;
        while (true) {
            i = (l + r) / 2;
            beforeOrAt = self[i % cardinality];
            // we've landed on an uninitialized tick, keep searching higher (more recently)
            if (!beforeOrAt.initialized) {
                l = i + 1;
                continue;
            }
            atOrAfter = self[(i + 1) % cardinality];
            bool targetAtOrAfter = lte(time, beforeOrAt.blockTimestamp, target);
            // check if we've found the answer!
            if (targetAtOrAfter && lte(time, target, atOrAfter.blockTimestamp)) break;
            if (!targetAtOrAfter) r = i - 1;
            else l = i + 1;
        }
    }
    /// @notice Fetches the observations beforeOrAt and atOrAfter a given target, i.e. where [beforeOrAt, atOrAfter] is satisfied
    /// @dev Assumes there is at least 1 initialized observation.
    /// Used by observeSingle() to compute the counterfactual accumulator values as of a given block timestamp.
    /// @param self The stored oracle array
    /// @param time The current block.timestamp
    /// @param target The timestamp at which the reserved observation should be for
    /// @param tick The active tick at the time of the returned or simulated observation
    /// @param index The index of the observation that was most recently written to the observations array
    /// @param liquidity The total pool liquidity at the time of the call
    /// @param cardinality The number of populated elements in the oracle array
    /// @return beforeOrAt The observation which occurred at, or before, the given timestamp
    /// @return atOrAfter The observation which occurred at, or after, the given timestamp
    function getSurroundingObservations(
        Observation[65535] storage self,
        uint32 time,
        uint32 target,
        int24 tick,
        uint16 index,
        uint128 liquidity,
        uint16 cardinality
    ) private view returns (Observation memory beforeOrAt, Observation memory atOrAfter) {
        // optimistically set before to the newest observation
        beforeOrAt = self[index];
        // if the target is chronologically at or after the newest observation, we can early return
        if (lte(time, beforeOrAt.blockTimestamp, target)) {
            if (beforeOrAt.blockTimestamp == target) {
                // if newest observation equals target, we're in the same block, so we can ignore atOrAfter
                return (beforeOrAt, atOrAfter);
            } else {
                // otherwise, we need to transform
                return (beforeOrAt, transform(beforeOrAt, target, tick, liquidity));
            }
        }
        // now, set before to the oldest observation
        beforeOrAt = self[(index + 1) % cardinality];
        if (!beforeOrAt.initialized) beforeOrAt = self[0];
        // ensure that the target is chronologically at or after the oldest observation
        require(lte(time, beforeOrAt.blockTimestamp, target), 'OLD');
        // if we've reached this point, we have to binary search
        return binarySearch(self, time, target, index, cardinality);
    }
    /// @dev Reverts if an observation at or before the desired observation timestamp does not exist.
    /// 0 may be passed as `secondsAgo' to return the current cumulative values.
    /// If called with a timestamp falling between two observations, returns the counterfactual accumulator values
    /// at exactly the timestamp between the two observations.
    /// @param self The stored oracle array
    /// @param time The current block timestamp
    /// @param secondsAgo The amount of time to look back, in seconds, at which point to return an observation
    /// @param tick The current tick
    /// @param index The index of the observation that was most recently written to the observations array
    /// @param liquidity The current in-range pool liquidity
    /// @param cardinality The number of populated elements in the oracle array
    /// @return tickCumulative The tick * time elapsed since the pool was first initialized, as of `secondsAgo`
    /// @return secondsPerLiquidityCumulativeX128 The time elapsed / max(1, liquidity) since the pool was first initialized, as of `secondsAgo`
    function observeSingle(
        Observation[65535] storage self,
        uint32 time,
        uint32 secondsAgo,
        int24 tick,
        uint16 index,
        uint128 liquidity,
        uint16 cardinality
    ) internal view returns (int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128) {
        if (secondsAgo == 0) {
            Observation memory last = self[index];
            if (last.blockTimestamp != time) last = transform(last, time, tick, liquidity);
            return (last.tickCumulative, last.secondsPerLiquidityCumulativeX128);
        }
        uint32 target = time - secondsAgo;
        (Observation memory beforeOrAt, Observation memory atOrAfter) =
            getSurroundingObservations(self, time, target, tick, index, liquidity, cardinality);
        if (target == beforeOrAt.blockTimestamp) {
            // we're at the left boundary
            return (beforeOrAt.tickCumulative, beforeOrAt.secondsPerLiquidityCumulativeX128);
        } else if (target == atOrAfter.blockTimestamp) {
            // we're at the right boundary
            return (atOrAfter.tickCumulative, atOrAfter.secondsPerLiquidityCumulativeX128);
        } else {
            // we're in the middle
            uint32 observationTimeDelta = atOrAfter.blockTimestamp - beforeOrAt.blockTimestamp;
            uint32 targetDelta = target - beforeOrAt.blockTimestamp;
            return (
                beforeOrAt.tickCumulative +
                    ((atOrAfter.tickCumulative - beforeOrAt.tickCumulative) / observationTimeDelta) *
                    targetDelta,
                beforeOrAt.secondsPerLiquidityCumulativeX128 +
                    uint160(
                        (uint256(
                            atOrAfter.secondsPerLiquidityCumulativeX128 - beforeOrAt.secondsPerLiquidityCumulativeX128
                        ) * targetDelta) / observationTimeDelta
                    )
            );
        }
    }
    /// @notice Returns the accumulator values as of each time seconds ago from the given time in the array of `secondsAgos`
    /// @dev Reverts if `secondsAgos` > oldest observation
    /// @param self The stored oracle array
    /// @param time The current block.timestamp
    /// @param secondsAgos Each amount of time to look back, in seconds, at which point to return an observation
    /// @param tick The current tick
    /// @param index The index of the observation that was most recently written to the observations array
    /// @param liquidity The current in-range pool liquidity
    /// @param cardinality The number of populated elements in the oracle array
    /// @return tickCumulatives The tick * time elapsed since the pool was first initialized, as of each `secondsAgo`
    /// @return secondsPerLiquidityCumulativeX128s The cumulative seconds / max(1, liquidity) since the pool was first initialized, as of each `secondsAgo`
    function observe(
        Observation[65535] storage self,
        uint32 time,
        uint32[] memory secondsAgos,
        int24 tick,
        uint16 index,
        uint128 liquidity,
        uint16 cardinality
    ) internal view returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s) {
        require(cardinality > 0, 'I');
        tickCumulatives = new int56[](secondsAgos.length);
        secondsPerLiquidityCumulativeX128s = new uint160[](secondsAgos.length);
        for (uint256 i = 0; i < secondsAgos.length; i++) {
            (tickCumulatives[i], secondsPerLiquidityCumulativeX128s[i]) = observeSingle(
                self,
                time,
                secondsAgos[i],
                tick,
                index,
                liquidity,
                cardinality
            );
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
    /// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    /// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
    function mulDiv(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        // 512-bit multiply [prod1 prod0] = a * b
        // Compute the product mod 2**256 and mod 2**256 - 1
        // then use the Chinese Remainder Theorem to reconstruct
        // the 512 bit result. The result is stored in two 256
        // variables such that product = prod1 * 2**256 + prod0
        uint256 prod0; // Least significant 256 bits of the product
        uint256 prod1; // Most significant 256 bits of the product
        assembly {
            let mm := mulmod(a, b, not(0))
            prod0 := mul(a, b)
            prod1 := sub(sub(mm, prod0), lt(mm, prod0))
        }
        // Handle non-overflow cases, 256 by 256 division
        if (prod1 == 0) {
            require(denominator > 0);
            assembly {
                result := div(prod0, denominator)
            }
            return result;
        }
        // Make sure the result is less than 2**256.
        // Also prevents denominator == 0
        require(denominator > prod1);
        ///////////////////////////////////////////////
        // 512 by 256 division.
        ///////////////////////////////////////////////
        // Make division exact by subtracting the remainder from [prod1 prod0]
        // Compute remainder using mulmod
        uint256 remainder;
        assembly {
            remainder := mulmod(a, b, denominator)
        }
        // Subtract 256 bit number from 512 bit number
        assembly {
            prod1 := sub(prod1, gt(remainder, prod0))
            prod0 := sub(prod0, remainder)
        }
        // Factor powers of two out of denominator
        // Compute largest power of two divisor of denominator.
        // Always >= 1.
        uint256 twos = -denominator & denominator;
        // Divide denominator by power of two
        assembly {
            denominator := div(denominator, twos)
        }
        // Divide [prod1 prod0] by the factors of two
        assembly {
            prod0 := div(prod0, twos)
        }
        // Shift in bits from prod1 into prod0. For this we need
        // to flip `twos` such that it is 2**256 / twos.
        // If twos is zero, then it becomes one
        assembly {
            twos := add(div(sub(0, twos), twos), 1)
        }
        prod0 |= prod1 * twos;
        // Invert denominator mod 2**256
        // Now that denominator is an odd number, it has an inverse
        // modulo 2**256 such that denominator * inv = 1 mod 2**256.
        // Compute the inverse by starting with a seed that is correct
        // correct for four bits. That is, denominator * inv = 1 mod 2**4
        uint256 inv = (3 * denominator) ^ 2;
        // Now use Newton-Raphson iteration to improve the precision.
        // Thanks to Hensel's lifting lemma, this also works in modular
        // arithmetic, doubling the correct bits in each step.
        inv *= 2 - denominator * inv; // inverse mod 2**8
        inv *= 2 - denominator * inv; // inverse mod 2**16
        inv *= 2 - denominator * inv; // inverse mod 2**32
        inv *= 2 - denominator * inv; // inverse mod 2**64
        inv *= 2 - denominator * inv; // inverse mod 2**128
        inv *= 2 - denominator * inv; // inverse mod 2**256
        // Because the division is now exact we can divide by multiplying
        // with the modular inverse of denominator. This will give us the
        // correct result modulo 2**256. Since the precoditions guarantee
        // that the outcome is less than 2**256, this is the final result.
        // We don't need to compute the high bits of the result and prod1
        // is no longer required.
        result = prod0 * inv;
        return result;
    }
    /// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    function mulDivRoundingUp(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        result = mulDiv(a, b, denominator);
        if (mulmod(a, b, denominator) > 0) {
            require(result < type(uint256).max);
            result++;
        }
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint128
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
library FixedPoint128 {
    uint256 internal constant Q128 = 0x100000000000000000000000000000000;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import '../interfaces/IERC20Minimal.sol';
/// @title TransferHelper
/// @notice Contains helper methods for interacting with ERC20 tokens that do not consistently return true/false
library TransferHelper {
    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Calls transfer on token contract, errors with TF if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) =
            token.call(abi.encodeWithSelector(IERC20Minimal.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TF');
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
    /// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
    int24 internal constant MIN_TICK = -887272;
    /// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
    int24 internal constant MAX_TICK = -MIN_TICK;
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 internal constant MIN_SQRT_RATIO = 4295128739;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;
    /// @notice Calculates sqrt(1.0001^tick) * 2^96
    /// @dev Throws if |tick| > max tick
    /// @param tick The input tick for the above formula
    /// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
    /// at the given tick
    function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
        uint256 absTick = tick < 0 ? uint256(-int256(tick)) : uint256(int256(tick));
        require(absTick <= uint256(MAX_TICK), 'T');
        uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
        if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
        if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
        if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
        if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
        if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
        if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
        if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
        if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
        if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
        if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
        if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
        if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
        if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
        if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
        if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
        if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
        if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
        if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
        if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;
        if (tick > 0) ratio = type(uint256).max / ratio;
        // this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
        // we then downcast because we know the result always fits within 160 bits due to our tick input constraint
        // we round up in the division so getTickAtSqrtRatio of the output price is always consistent
        sqrtPriceX96 = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
    }
    /// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
    /// @dev Throws in case sqrtPriceX96 < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
    /// ever return.
    /// @param sqrtPriceX96 The sqrt ratio for which to compute the tick as a Q64.96
    /// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
    function getTickAtSqrtRatio(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
        // second inequality must be < because the price can never reach the price at the max tick
        require(sqrtPriceX96 >= MIN_SQRT_RATIO && sqrtPriceX96 < MAX_SQRT_RATIO, 'R');
        uint256 ratio = uint256(sqrtPriceX96) << 32;
        uint256 r = ratio;
        uint256 msb = 0;
        assembly {
            let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := shl(5, gt(r, 0xFFFFFFFF))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := shl(4, gt(r, 0xFFFF))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := shl(3, gt(r, 0xFF))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := shl(2, gt(r, 0xF))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := shl(1, gt(r, 0x3))
            msb := or(msb, f)
            r := shr(f, r)
        }
        assembly {
            let f := gt(r, 0x1)
            msb := or(msb, f)
        }
        if (msb >= 128) r = ratio >> (msb - 127);
        else r = ratio << (127 - msb);
        int256 log_2 = (int256(msb) - 128) << 64;
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(63, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(62, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(61, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(60, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(59, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(58, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(57, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(56, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(55, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(54, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(53, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(52, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(51, f))
            r := shr(f, r)
        }
        assembly {
            r := shr(127, mul(r, r))
            let f := shr(128, r)
            log_2 := or(log_2, shl(50, f))
        }
        int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number
        int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
        int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
        tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= sqrtPriceX96 ? tickHi : tickLow;
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math library for liquidity
library LiquidityMath {
    /// @notice Add a signed liquidity delta to liquidity and revert if it overflows or underflows
    /// @param x The liquidity before change
    /// @param y The delta by which liquidity should be changed
    /// @return z The liquidity delta
    function addDelta(uint128 x, int128 y) internal pure returns (uint128 z) {
        if (y < 0) {
            require((z = x - uint128(-y)) < x, 'LS');
        } else {
            require((z = x + uint128(y)) >= x, 'LA');
        }
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './LowGasSafeMath.sol';
import './SafeCast.sol';
import './FullMath.sol';
import './UnsafeMath.sol';
import './FixedPoint96.sol';
/// @title Functions based on Q64.96 sqrt price and liquidity
/// @notice Contains the math that uses square root of price as a Q64.96 and liquidity to compute deltas
library SqrtPriceMath {
    using LowGasSafeMath for uint256;
    using SafeCast for uint256;
    /// @notice Gets the next sqrt price given a delta of token0
    /// @dev Always rounds up, because in the exact output case (increasing price) we need to move the price at least
    /// far enough to get the desired output amount, and in the exact input case (decreasing price) we need to move the
    /// price less in order to not send too much output.
    /// The most precise formula for this is liquidity * sqrtPX96 / (liquidity +- amount * sqrtPX96),
    /// if this is impossible because of overflow, we calculate liquidity / (liquidity / sqrtPX96 +- amount).
    /// @param sqrtPX96 The starting price, i.e. before accounting for the token0 delta
    /// @param liquidity The amount of usable liquidity
    /// @param amount How much of token0 to add or remove from virtual reserves
    /// @param add Whether to add or remove the amount of token0
    /// @return The price after adding or removing amount, depending on add
    function getNextSqrtPriceFromAmount0RoundingUp(
        uint160 sqrtPX96,
        uint128 liquidity,
        uint256 amount,
        bool add
    ) internal pure returns (uint160) {
        // we short circuit amount == 0 because the result is otherwise not guaranteed to equal the input price
        if (amount == 0) return sqrtPX96;
        uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
        if (add) {
            uint256 product;
            if ((product = amount * sqrtPX96) / amount == sqrtPX96) {
                uint256 denominator = numerator1 + product;
                if (denominator >= numerator1)
                    // always fits in 160 bits
                    return uint160(FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator));
            }
            return uint160(UnsafeMath.divRoundingUp(numerator1, (numerator1 / sqrtPX96).add(amount)));
        } else {
            uint256 product;
            // if the product overflows, we know the denominator underflows
            // in addition, we must check that the denominator does not underflow
            require((product = amount * sqrtPX96) / amount == sqrtPX96 && numerator1 > product);
            uint256 denominator = numerator1 - product;
            return FullMath.mulDivRoundingUp(numerator1, sqrtPX96, denominator).toUint160();
        }
    }
    /// @notice Gets the next sqrt price given a delta of token1
    /// @dev Always rounds down, because in the exact output case (decreasing price) we need to move the price at least
    /// far enough to get the desired output amount, and in the exact input case (increasing price) we need to move the
    /// price less in order to not send too much output.
    /// The formula we compute is within <1 wei of the lossless version: sqrtPX96 +- amount / liquidity
    /// @param sqrtPX96 The starting price, i.e., before accounting for the token1 delta
    /// @param liquidity The amount of usable liquidity
    /// @param amount How much of token1 to add, or remove, from virtual reserves
    /// @param add Whether to add, or remove, the amount of token1
    /// @return The price after adding or removing `amount`
    function getNextSqrtPriceFromAmount1RoundingDown(
        uint160 sqrtPX96,
        uint128 liquidity,
        uint256 amount,
        bool add
    ) internal pure returns (uint160) {
        // if we're adding (subtracting), rounding down requires rounding the quotient down (up)
        // in both cases, avoid a mulDiv for most inputs
        if (add) {
            uint256 quotient =
                (
                    amount <= type(uint160).max
                        ? (amount << FixedPoint96.RESOLUTION) / liquidity
                        : FullMath.mulDiv(amount, FixedPoint96.Q96, liquidity)
                );
            return uint256(sqrtPX96).add(quotient).toUint160();
        } else {
            uint256 quotient =
                (
                    amount <= type(uint160).max
                        ? UnsafeMath.divRoundingUp(amount << FixedPoint96.RESOLUTION, liquidity)
                        : FullMath.mulDivRoundingUp(amount, FixedPoint96.Q96, liquidity)
                );
            require(sqrtPX96 > quotient);
            // always fits 160 bits
            return uint160(sqrtPX96 - quotient);
        }
    }
    /// @notice Gets the next sqrt price given an input amount of token0 or token1
    /// @dev Throws if price or liquidity are 0, or if the next price is out of bounds
    /// @param sqrtPX96 The starting price, i.e., before accounting for the input amount
    /// @param liquidity The amount of usable liquidity
    /// @param amountIn How much of token0, or token1, is being swapped in
    /// @param zeroForOne Whether the amount in is token0 or token1
    /// @return sqrtQX96 The price after adding the input amount to token0 or token1
    function getNextSqrtPriceFromInput(
        uint160 sqrtPX96,
        uint128 liquidity,
        uint256 amountIn,
        bool zeroForOne
    ) internal pure returns (uint160 sqrtQX96) {
        require(sqrtPX96 > 0);
        require(liquidity > 0);
        // round to make sure that we don't pass the target price
        return
            zeroForOne
                ? getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountIn, true)
                : getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountIn, true);
    }
    /// @notice Gets the next sqrt price given an output amount of token0 or token1
    /// @dev Throws if price or liquidity are 0 or the next price is out of bounds
    /// @param sqrtPX96 The starting price before accounting for the output amount
    /// @param liquidity The amount of usable liquidity
    /// @param amountOut How much of token0, or token1, is being swapped out
    /// @param zeroForOne Whether the amount out is token0 or token1
    /// @return sqrtQX96 The price after removing the output amount of token0 or token1
    function getNextSqrtPriceFromOutput(
        uint160 sqrtPX96,
        uint128 liquidity,
        uint256 amountOut,
        bool zeroForOne
    ) internal pure returns (uint160 sqrtQX96) {
        require(sqrtPX96 > 0);
        require(liquidity > 0);
        // round to make sure that we pass the target price
        return
            zeroForOne
                ? getNextSqrtPriceFromAmount1RoundingDown(sqrtPX96, liquidity, amountOut, false)
                : getNextSqrtPriceFromAmount0RoundingUp(sqrtPX96, liquidity, amountOut, false);
    }
    /// @notice Gets the amount0 delta between two prices
    /// @dev Calculates liquidity / sqrt(lower) - liquidity / sqrt(upper),
    /// i.e. liquidity * (sqrt(upper) - sqrt(lower)) / (sqrt(upper) * sqrt(lower))
    /// @param sqrtRatioAX96 A sqrt price
    /// @param sqrtRatioBX96 Another sqrt price
    /// @param liquidity The amount of usable liquidity
    /// @param roundUp Whether to round the amount up or down
    /// @return amount0 Amount of token0 required to cover a position of size liquidity between the two passed prices
    function getAmount0Delta(
        uint160 sqrtRatioAX96,
        uint160 sqrtRatioBX96,
        uint128 liquidity,
        bool roundUp
    ) internal pure returns (uint256 amount0) {
        if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
        uint256 numerator1 = uint256(liquidity) << FixedPoint96.RESOLUTION;
        uint256 numerator2 = sqrtRatioBX96 - sqrtRatioAX96;
        require(sqrtRatioAX96 > 0);
        return
            roundUp
                ? UnsafeMath.divRoundingUp(
                    FullMath.mulDivRoundingUp(numerator1, numerator2, sqrtRatioBX96),
                    sqrtRatioAX96
                )
                : FullMath.mulDiv(numerator1, numerator2, sqrtRatioBX96) / sqrtRatioAX96;
    }
    /// @notice Gets the amount1 delta between two prices
    /// @dev Calculates liquidity * (sqrt(upper) - sqrt(lower))
    /// @param sqrtRatioAX96 A sqrt price
    /// @param sqrtRatioBX96 Another sqrt price
    /// @param liquidity The amount of usable liquidity
    /// @param roundUp Whether to round the amount up, or down
    /// @return amount1 Amount of token1 required to cover a position of size liquidity between the two passed prices
    function getAmount1Delta(
        uint160 sqrtRatioAX96,
        uint160 sqrtRatioBX96,
        uint128 liquidity,
        bool roundUp
    ) internal pure returns (uint256 amount1) {
        if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
        return
            roundUp
                ? FullMath.mulDivRoundingUp(liquidity, sqrtRatioBX96 - sqrtRatioAX96, FixedPoint96.Q96)
                : FullMath.mulDiv(liquidity, sqrtRatioBX96 - sqrtRatioAX96, FixedPoint96.Q96);
    }
    /// @notice Helper that gets signed token0 delta
    /// @param sqrtRatioAX96 A sqrt price
    /// @param sqrtRatioBX96 Another sqrt price
    /// @param liquidity The change in liquidity for which to compute the amount0 delta
    /// @return amount0 Amount of token0 corresponding to the passed liquidityDelta between the two prices
    function getAmount0Delta(
        uint160 sqrtRatioAX96,
        uint160 sqrtRatioBX96,
        int128 liquidity
    ) internal pure returns (int256 amount0) {
        return
            liquidity < 0
                ? -getAmount0Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(-liquidity), false).toInt256()
                : getAmount0Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(liquidity), true).toInt256();
    }
    /// @notice Helper that gets signed token1 delta
    /// @param sqrtRatioAX96 A sqrt price
    /// @param sqrtRatioBX96 Another sqrt price
    /// @param liquidity The change in liquidity for which to compute the amount1 delta
    /// @return amount1 Amount of token1 corresponding to the passed liquidityDelta between the two prices
    function getAmount1Delta(
        uint160 sqrtRatioAX96,
        uint160 sqrtRatioBX96,
        int128 liquidity
    ) internal pure returns (int256 amount1) {
        return
            liquidity < 0
                ? -getAmount1Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(-liquidity), false).toInt256()
                : getAmount1Delta(sqrtRatioAX96, sqrtRatioBX96, uint128(liquidity), true).toInt256();
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import './FullMath.sol';
import './SqrtPriceMath.sol';
/// @title Computes the result of a swap within ticks
/// @notice Contains methods for computing the result of a swap within a single tick price range, i.e., a single tick.
library SwapMath {
    /// @notice Computes the result of swapping some amount in, or amount out, given the parameters of the swap
    /// @dev The fee, plus the amount in, will never exceed the amount remaining if the swap's `amountSpecified` is positive
    /// @param sqrtRatioCurrentX96 The current sqrt price of the pool
    /// @param sqrtRatioTargetX96 The price that cannot be exceeded, from which the direction of the swap is inferred
    /// @param liquidity The usable liquidity
    /// @param amountRemaining How much input or output amount is remaining to be swapped in/out
    /// @param feePips The fee taken from the input amount, expressed in hundredths of a bip
    /// @return sqrtRatioNextX96 The price after swapping the amount in/out, not to exceed the price target
    /// @return amountIn The amount to be swapped in, of either token0 or token1, based on the direction of the swap
    /// @return amountOut The amount to be received, of either token0 or token1, based on the direction of the swap
    /// @return feeAmount The amount of input that will be taken as a fee
    function computeSwapStep(
        uint160 sqrtRatioCurrentX96,
        uint160 sqrtRatioTargetX96,
        uint128 liquidity,
        int256 amountRemaining,
        uint24 feePips
    )
        internal
        pure
        returns (
            uint160 sqrtRatioNextX96,
            uint256 amountIn,
            uint256 amountOut,
            uint256 feeAmount
        )
    {
        bool zeroForOne = sqrtRatioCurrentX96 >= sqrtRatioTargetX96;
        bool exactIn = amountRemaining >= 0;
        if (exactIn) {
            uint256 amountRemainingLessFee = FullMath.mulDiv(uint256(amountRemaining), 1e6 - feePips, 1e6);
            amountIn = zeroForOne
                ? SqrtPriceMath.getAmount0Delta(sqrtRatioTargetX96, sqrtRatioCurrentX96, liquidity, true)
                : SqrtPriceMath.getAmount1Delta(sqrtRatioCurrentX96, sqrtRatioTargetX96, liquidity, true);
            if (amountRemainingLessFee >= amountIn) sqrtRatioNextX96 = sqrtRatioTargetX96;
            else
                sqrtRatioNextX96 = SqrtPriceMath.getNextSqrtPriceFromInput(
                    sqrtRatioCurrentX96,
                    liquidity,
                    amountRemainingLessFee,
                    zeroForOne
                );
        } else {
            amountOut = zeroForOne
                ? SqrtPriceMath.getAmount1Delta(sqrtRatioTargetX96, sqrtRatioCurrentX96, liquidity, false)
                : SqrtPriceMath.getAmount0Delta(sqrtRatioCurrentX96, sqrtRatioTargetX96, liquidity, false);
            if (uint256(-amountRemaining) >= amountOut) sqrtRatioNextX96 = sqrtRatioTargetX96;
            else
                sqrtRatioNextX96 = SqrtPriceMath.getNextSqrtPriceFromOutput(
                    sqrtRatioCurrentX96,
                    liquidity,
                    uint256(-amountRemaining),
                    zeroForOne
                );
        }
        bool max = sqrtRatioTargetX96 == sqrtRatioNextX96;
        // get the input/output amounts
        if (zeroForOne) {
            amountIn = max && exactIn
                ? amountIn
                : SqrtPriceMath.getAmount0Delta(sqrtRatioNextX96, sqrtRatioCurrentX96, liquidity, true);
            amountOut = max && !exactIn
                ? amountOut
                : SqrtPriceMath.getAmount1Delta(sqrtRatioNextX96, sqrtRatioCurrentX96, liquidity, false);
        } else {
            amountIn = max && exactIn
                ? amountIn
                : SqrtPriceMath.getAmount1Delta(sqrtRatioCurrentX96, sqrtRatioNextX96, liquidity, true);
            amountOut = max && !exactIn
                ? amountOut
                : SqrtPriceMath.getAmount0Delta(sqrtRatioCurrentX96, sqrtRatioNextX96, liquidity, false);
        }
        // cap the output amount to not exceed the remaining output amount
        if (!exactIn && amountOut > uint256(-amountRemaining)) {
            amountOut = uint256(-amountRemaining);
        }
        if (exactIn && sqrtRatioNextX96 != sqrtRatioTargetX96) {
            // we didn't reach the target, so take the remainder of the maximum input as fee
            feeAmount = uint256(amountRemaining) - amountIn;
        } else {
            feeAmount = FullMath.mulDivRoundingUp(amountIn, feePips, 1e6 - feePips);
        }
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title An interface for a contract that is capable of deploying Uniswap V3 Pools
/// @notice A contract that constructs a pool must implement this to pass arguments to the pool
/// @dev This is used to avoid having constructor arguments in the pool contract, which results in the init code hash
/// of the pool being constant allowing the CREATE2 address of the pool to be cheaply computed on-chain
interface IUniswapV3PoolDeployer {
    /// @notice Get the parameters to be used in constructing the pool, set transiently during pool creation.
    /// @dev Called by the pool constructor to fetch the parameters of the pool
    /// Returns factory The factory address
    /// Returns token0 The first token of the pool by address sort order
    /// Returns token1 The second token of the pool by address sort order
    /// Returns fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// Returns tickSpacing The minimum number of ticks between initialized ticks
    function parameters()
        external
        view
        returns (
            address factory,
            address token0,
            address token1,
            uint24 fee,
            int24 tickSpacing
        );
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title The interface for the Uniswap V3 Factory
/// @notice The Uniswap V3 Factory facilitates creation of Uniswap V3 pools and control over the protocol fees
interface IUniswapV3Factory {
    /// @notice Emitted when the owner of the factory is changed
    /// @param oldOwner The owner before the owner was changed
    /// @param newOwner The owner after the owner was changed
    event OwnerChanged(address indexed oldOwner, address indexed newOwner);
    /// @notice Emitted when a pool is created
    /// @param token0 The first token of the pool by address sort order
    /// @param token1 The second token of the pool by address sort order
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks
    /// @param pool The address of the created pool
    event PoolCreated(
        address indexed token0,
        address indexed token1,
        uint24 indexed fee,
        int24 tickSpacing,
        address pool
    );
    /// @notice Emitted when a new fee amount is enabled for pool creation via the factory
    /// @param fee The enabled fee, denominated in hundredths of a bip
    /// @param tickSpacing The minimum number of ticks between initialized ticks for pools created with the given fee
    event FeeAmountEnabled(uint24 indexed fee, int24 indexed tickSpacing);
    /// @notice Returns the current owner of the factory
    /// @dev Can be changed by the current owner via setOwner
    /// @return The address of the factory owner
    function owner() external view returns (address);
    /// @notice Returns the tick spacing for a given fee amount, if enabled, or 0 if not enabled
    /// @dev A fee amount can never be removed, so this value should be hard coded or cached in the calling context
    /// @param fee The enabled fee, denominated in hundredths of a bip. Returns 0 in case of unenabled fee
    /// @return The tick spacing
    function feeAmountTickSpacing(uint24 fee) external view returns (int24);
    /// @notice Returns the pool address for a given pair of tokens and a fee, or address 0 if it does not exist
    /// @dev tokenA and tokenB may be passed in either token0/token1 or token1/token0 order
    /// @param tokenA The contract address of either token0 or token1
    /// @param tokenB The contract address of the other token
    /// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
    /// @return pool The pool address
    function getPool(
        address tokenA,
        address tokenB,
        uint24 fee
    ) external view returns (address pool);
    /// @notice Creates a pool for the given two tokens and fee
    /// @param tokenA One of the two tokens in the desired pool
    /// @param tokenB The other of the two tokens in the desired pool
    /// @param fee The desired fee for the pool
    /// @dev tokenA and tokenB may be passed in either order: token0/token1 or token1/token0. tickSpacing is retrieved
    /// from the fee. The call will revert if the pool already exists, the fee is invalid, or the token arguments
    /// are invalid.
    /// @return pool The address of the newly created pool
    function createPool(
        address tokenA,
        address tokenB,
        uint24 fee
    ) external returns (address pool);
    /// @notice Updates the owner of the factory
    /// @dev Must be called by the current owner
    /// @param _owner The new owner of the factory
    function setOwner(address _owner) external;
    /// @notice Enables a fee amount with the given tickSpacing
    /// @dev Fee amounts may never be removed once enabled
    /// @param fee The fee amount to enable, denominated in hundredths of a bip (i.e. 1e-6)
    /// @param tickSpacing The spacing between ticks to be enforced for all pools created with the given fee amount
    function enableFeeAmount(uint24 fee, int24 tickSpacing) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Minimal ERC20 interface for Uniswap
/// @notice Contains a subset of the full ERC20 interface that is used in Uniswap V3
interface IERC20Minimal {
    /// @notice Returns the balance of a token
    /// @param account The account for which to look up the number of tokens it has, i.e. its balance
    /// @return The number of tokens held by the account
    function balanceOf(address account) external view returns (uint256);
    /// @notice Transfers the amount of token from the `msg.sender` to the recipient
    /// @param recipient The account that will receive the amount transferred
    /// @param amount The number of tokens to send from the sender to the recipient
    /// @return Returns true for a successful transfer, false for an unsuccessful transfer
    function transfer(address recipient, uint256 amount) external returns (bool);
    /// @notice Returns the current allowance given to a spender by an owner
    /// @param owner The account of the token owner
    /// @param spender The account of the token spender
    /// @return The current allowance granted by `owner` to `spender`
    function allowance(address owner, address spender) external view returns (uint256);
    /// @notice Sets the allowance of a spender from the `msg.sender` to the value `amount`
    /// @param spender The account which will be allowed to spend a given amount of the owners tokens
    /// @param amount The amount of tokens allowed to be used by `spender`
    /// @return Returns true for a successful approval, false for unsuccessful
    function approve(address spender, uint256 amount) external returns (bool);
    /// @notice Transfers `amount` tokens from `sender` to `recipient` up to the allowance given to the `msg.sender`
    /// @param sender The account from which the transfer will be initiated
    /// @param recipient The recipient of the transfer
    /// @param amount The amount of the transfer
    /// @return Returns true for a successful transfer, false for unsuccessful
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);
    /// @notice Event emitted when tokens are transferred from one address to another, either via `#transfer` or `#transferFrom`.
    /// @param from The account from which the tokens were sent, i.e. the balance decreased
    /// @param to The account to which the tokens were sent, i.e. the balance increased
    /// @param value The amount of tokens that were transferred
    event Transfer(address indexed from, address indexed to, uint256 value);
    /// @notice Event emitted when the approval amount for the spender of a given owner's tokens changes.
    /// @param owner The account that approved spending of its tokens
    /// @param spender The account for which the spending allowance was modified
    /// @param value The new allowance from the owner to the spender
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#mint
/// @notice Any contract that calls IUniswapV3PoolActions#mint must implement this interface
interface IUniswapV3MintCallback {
    /// @notice Called to `msg.sender` after minting liquidity to a position from IUniswapV3Pool#mint.
    /// @dev In the implementation you must pay the pool tokens owed for the minted liquidity.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// @param amount0Owed The amount of token0 due to the pool for the minted liquidity
    /// @param amount1Owed The amount of token1 due to the pool for the minted liquidity
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#mint call
    function uniswapV3MintCallback(
        uint256 amount0Owed,
        uint256 amount1Owed,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#flash
/// @notice Any contract that calls IUniswapV3PoolActions#flash must implement this interface
interface IUniswapV3FlashCallback {
    /// @notice Called to `msg.sender` after transferring to the recipient from IUniswapV3Pool#flash.
    /// @dev In the implementation you must repay the pool the tokens sent by flash plus the computed fee amounts.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// @param fee0 The fee amount in token0 due to the pool by the end of the flash
    /// @param fee1 The fee amount in token1 due to the pool by the end of the flash
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#flash call
    function uniswapV3FlashCallback(
        uint256 fee0,
        uint256 fee1,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
    /// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
    /// @return The contract address
    function factory() external view returns (address);
    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);
    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);
    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
    /// @notice The pool tick spacing
    /// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
    /// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
    /// This value is an int24 to avoid casting even though it is always positive.
    /// @return The tick spacing
    function tickSpacing() external view returns (int24);
    /// @notice The maximum amount of position liquidity that can use any tick in the range
    /// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
    /// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
    /// @return The max amount of liquidity per tick
    function maxLiquidityPerTick() external view returns (uint128);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
    /// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
    /// when accessed externally.
    /// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
    /// tick The current tick of the pool, i.e. according to the last tick transition that was run.
    /// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
    /// boundary.
    /// observationIndex The index of the last oracle observation that was written,
    /// observationCardinality The current maximum number of observations stored in the pool,
    /// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
    /// feeProtocol The protocol fee for both tokens of the pool.
    /// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
    /// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
    /// unlocked Whether the pool is currently locked to reentrancy
    function slot0()
        external
        view
        returns (
            uint160 sqrtPriceX96,
            int24 tick,
            uint16 observationIndex,
            uint16 observationCardinality,
            uint16 observationCardinalityNext,
            uint8 feeProtocol,
            bool unlocked
        );
    /// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal0X128() external view returns (uint256);
    /// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal1X128() external view returns (uint256);
    /// @notice The amounts of token0 and token1 that are owed to the protocol
    /// @dev Protocol fees will never exceed uint128 max in either token
    function protocolFees() external view returns (uint128 token0, uint128 token1);
    /// @notice The currently in range liquidity available to the pool
    /// @dev This value has no relationship to the total liquidity across all ticks
    function liquidity() external view returns (uint128);
    /// @notice Look up information about a specific tick in the pool
    /// @param tick The tick to look up
    /// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
    /// tick upper,
    /// liquidityNet how much liquidity changes when the pool price crosses the tick,
    /// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
    /// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
    /// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
    /// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
    /// secondsOutside the seconds spent on the other side of the tick from the current tick,
    /// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
    /// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
    /// In addition, these values are only relative and must be used only in comparison to previous snapshots for
    /// a specific position.
    function ticks(int24 tick)
        external
        view
        returns (
            uint128 liquidityGross,
            int128 liquidityNet,
            uint256 feeGrowthOutside0X128,
            uint256 feeGrowthOutside1X128,
            int56 tickCumulativeOutside,
            uint160 secondsPerLiquidityOutsideX128,
            uint32 secondsOutside,
            bool initialized
        );
    /// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
    function tickBitmap(int16 wordPosition) external view returns (uint256);
    /// @notice Returns the information about a position by the position's key
    /// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
    /// @return _liquidity The amount of liquidity in the position,
    /// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
    /// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
    /// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
    /// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
    function positions(bytes32 key)
        external
        view
        returns (
            uint128 _liquidity,
            uint256 feeGrowthInside0LastX128,
            uint256 feeGrowthInside1LastX128,
            uint128 tokensOwed0,
            uint128 tokensOwed1
        );
    /// @notice Returns data about a specific observation index
    /// @param index The element of the observations array to fetch
    /// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
    /// ago, rather than at a specific index in the array.
    /// @return blockTimestamp The timestamp of the observation,
    /// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
    /// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
    /// Returns initialized whether the observation has been initialized and the values are safe to use
    function observations(uint256 index)
        external
        view
        returns (
            uint32 blockTimestamp,
            int56 tickCumulative,
            uint160 secondsPerLiquidityCumulativeX128,
            bool initialized
        );
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
    /// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
    /// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
    /// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
    /// you must call it with secondsAgos = [3600, 0].
    /// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
    /// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
    /// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
    /// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
    /// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
    /// timestamp
    function observe(uint32[] calldata secondsAgos)
        external
        view
        returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);
    /// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
    /// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
    /// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
    /// snapshot is taken and the second snapshot is taken.
    /// @param tickLower The lower tick of the range
    /// @param tickUpper The upper tick of the range
    /// @return tickCumulativeInside The snapshot of the tick accumulator for the range
    /// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
    /// @return secondsInside The snapshot of seconds per liquidity for the range
    function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
        external
        view
        returns (
            int56 tickCumulativeInside,
            uint160 secondsPerLiquidityInsideX128,
            uint32 secondsInside
        );
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
    /// @notice Sets the initial price for the pool
    /// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
    /// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
    function initialize(uint160 sqrtPriceX96) external;
    /// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
    /// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
    /// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
    /// on tickLower, tickUpper, the amount of liquidity, and the current price.
    /// @param recipient The address for which the liquidity will be created
    /// @param tickLower The lower tick of the position in which to add liquidity
    /// @param tickUpper The upper tick of the position in which to add liquidity
    /// @param amount The amount of liquidity to mint
    /// @param data Any data that should be passed through to the callback
    /// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
    /// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
    function mint(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount,
        bytes calldata data
    ) external returns (uint256 amount0, uint256 amount1);
    /// @notice Collects tokens owed to a position
    /// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
    /// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
    /// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
    /// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
    /// @param recipient The address which should receive the fees collected
    /// @param tickLower The lower tick of the position for which to collect fees
    /// @param tickUpper The upper tick of the position for which to collect fees
    /// @param amount0Requested How much token0 should be withdrawn from the fees owed
    /// @param amount1Requested How much token1 should be withdrawn from the fees owed
    /// @return amount0 The amount of fees collected in token0
    /// @return amount1 The amount of fees collected in token1
    function collect(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);
    /// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
    /// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
    /// @dev Fees must be collected separately via a call to #collect
    /// @param tickLower The lower tick of the position for which to burn liquidity
    /// @param tickUpper The upper tick of the position for which to burn liquidity
    /// @param amount How much liquidity to burn
    /// @return amount0 The amount of token0 sent to the recipient
    /// @return amount1 The amount of token1 sent to the recipient
    function burn(
        int24 tickLower,
        int24 tickUpper,
        uint128 amount
    ) external returns (uint256 amount0, uint256 amount1);
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);
    /// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
    /// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
    /// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
    /// with 0 amount{0,1} and sending the donation amount(s) from the callback
    /// @param recipient The address which will receive the token0 and token1 amounts
    /// @param amount0 The amount of token0 to send
    /// @param amount1 The amount of token1 to send
    /// @param data Any data to be passed through to the callback
    function flash(
        address recipient,
        uint256 amount0,
        uint256 amount1,
        bytes calldata data
    ) external;
    /// @notice Increase the maximum number of price and liquidity observations that this pool will store
    /// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
    /// the input observationCardinalityNext.
    /// @param observationCardinalityNext The desired minimum number of observations for the pool to store
    function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IUniswapV3PoolOwnerActions {
    /// @notice Set the denominator of the protocol's % share of the fees
    /// @param feeProtocol0 new protocol fee for token0 of the pool
    /// @param feeProtocol1 new protocol fee for token1 of the pool
    function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external;
    /// @notice Collect the protocol fee accrued to the pool
    /// @param recipient The address to which collected protocol fees should be sent
    /// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
    /// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
    /// @return amount0 The protocol fee collected in token0
    /// @return amount1 The protocol fee collected in token1
    function collectProtocol(
        address recipient,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IUniswapV3PoolEvents {
    /// @notice Emitted exactly once by a pool when #initialize is first called on the pool
    /// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
    /// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
    /// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
    event Initialize(uint160 sqrtPriceX96, int24 tick);
    /// @notice Emitted when liquidity is minted for a given position
    /// @param sender The address that minted the liquidity
    /// @param owner The owner of the position and recipient of any minted liquidity
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount The amount of liquidity minted to the position range
    /// @param amount0 How much token0 was required for the minted liquidity
    /// @param amount1 How much token1 was required for the minted liquidity
    event Mint(
        address sender,
        address indexed owner,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount,
        uint256 amount0,
        uint256 amount1
    );
    /// @notice Emitted when fees are collected by the owner of a position
    /// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
    /// @param owner The owner of the position for which fees are collected
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount0 The amount of token0 fees collected
    /// @param amount1 The amount of token1 fees collected
    event Collect(
        address indexed owner,
        address recipient,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount0,
        uint128 amount1
    );
    /// @notice Emitted when a position's liquidity is removed
    /// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
    /// @param owner The owner of the position for which liquidity is removed
    /// @param tickLower The lower tick of the position
    /// @param tickUpper The upper tick of the position
    /// @param amount The amount of liquidity to remove
    /// @param amount0 The amount of token0 withdrawn
    /// @param amount1 The amount of token1 withdrawn
    event Burn(
        address indexed owner,
        int24 indexed tickLower,
        int24 indexed tickUpper,
        uint128 amount,
        uint256 amount0,
        uint256 amount1
    );
    /// @notice Emitted by the pool for any swaps between token0 and token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the output of the swap
    /// @param amount0 The delta of the token0 balance of the pool
    /// @param amount1 The delta of the token1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of price of the pool after the swap
    event Swap(
        address indexed sender,
        address indexed recipient,
        int256 amount0,
        int256 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick
    );
    /// @notice Emitted by the pool for any flashes of token0/token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the tokens from flash
    /// @param amount0 The amount of token0 that was flashed
    /// @param amount1 The amount of token1 that was flashed
    /// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
    /// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
    event Flash(
        address indexed sender,
        address indexed recipient,
        uint256 amount0,
        uint256 amount1,
        uint256 paid0,
        uint256 paid1
    );
    /// @notice Emitted by the pool for increases to the number of observations that can be stored
    /// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
    /// just before a mint/swap/burn.
    /// @param observationCardinalityNextOld The previous value of the next observation cardinality
    /// @param observationCardinalityNextNew The updated value of the next observation cardinality
    event IncreaseObservationCardinalityNext(
        uint16 observationCardinalityNextOld,
        uint16 observationCardinalityNextNew
    );
    /// @notice Emitted when the protocol fee is changed by the pool
    /// @param feeProtocol0Old The previous value of the token0 protocol fee
    /// @param feeProtocol1Old The previous value of the token1 protocol fee
    /// @param feeProtocol0New The updated value of the token0 protocol fee
    /// @param feeProtocol1New The updated value of the token1 protocol fee
    event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);
    /// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
    /// @param sender The address that collects the protocol fees
    /// @param recipient The address that receives the collected protocol fees
    /// @param amount0 The amount of token0 protocol fees that is withdrawn
    /// @param amount0 The amount of token1 protocol fees that is withdrawn
    event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title BitMath
/// @dev This library provides functionality for computing bit properties of an unsigned integer
library BitMath {
    /// @notice Returns the index of the most significant bit of the number,
    ///     where the least significant bit is at index 0 and the most significant bit is at index 255
    /// @dev The function satisfies the property:
    ///     x >= 2**mostSignificantBit(x) and x < 2**(mostSignificantBit(x)+1)
    /// @param x the value for which to compute the most significant bit, must be greater than 0
    /// @return r the index of the most significant bit
    function mostSignificantBit(uint256 x) internal pure returns (uint8 r) {
        require(x > 0);
        if (x >= 0x100000000000000000000000000000000) {
            x >>= 128;
            r += 128;
        }
        if (x >= 0x10000000000000000) {
            x >>= 64;
            r += 64;
        }
        if (x >= 0x100000000) {
            x >>= 32;
            r += 32;
        }
        if (x >= 0x10000) {
            x >>= 16;
            r += 16;
        }
        if (x >= 0x100) {
            x >>= 8;
            r += 8;
        }
        if (x >= 0x10) {
            x >>= 4;
            r += 4;
        }
        if (x >= 0x4) {
            x >>= 2;
            r += 2;
        }
        if (x >= 0x2) r += 1;
    }
    /// @notice Returns the index of the least significant bit of the number,
    ///     where the least significant bit is at index 0 and the most significant bit is at index 255
    /// @dev The function satisfies the property:
    ///     (x & 2**leastSignificantBit(x)) != 0 and (x & (2**(leastSignificantBit(x)) - 1)) == 0)
    /// @param x the value for which to compute the least significant bit, must be greater than 0
    /// @return r the index of the least significant bit
    function leastSignificantBit(uint256 x) internal pure returns (uint8 r) {
        require(x > 0);
        r = 255;
        if (x & type(uint128).max > 0) {
            r -= 128;
        } else {
            x >>= 128;
        }
        if (x & type(uint64).max > 0) {
            r -= 64;
        } else {
            x >>= 64;
        }
        if (x & type(uint32).max > 0) {
            r -= 32;
        } else {
            x >>= 32;
        }
        if (x & type(uint16).max > 0) {
            r -= 16;
        } else {
            x >>= 16;
        }
        if (x & type(uint8).max > 0) {
            r -= 8;
        } else {
            x >>= 8;
        }
        if (x & 0xf > 0) {
            r -= 4;
        } else {
            x >>= 4;
        }
        if (x & 0x3 > 0) {
            r -= 2;
        } else {
            x >>= 2;
        }
        if (x & 0x1 > 0) r -= 1;
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math functions that do not check inputs or outputs
/// @notice Contains methods that perform common math functions but do not do any overflow or underflow checks
library UnsafeMath {
    /// @notice Returns ceil(x / y)
    /// @dev division by 0 has unspecified behavior, and must be checked externally
    /// @param x The dividend
    /// @param y The divisor
    /// @return z The quotient, ceil(x / y)
    function divRoundingUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        assembly {
            z := add(div(x, y), gt(mod(x, y), 0))
        }
    }
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint96
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev Used in SqrtPriceMath.sol
library FixedPoint96 {
    uint8 internal constant RESOLUTION = 96;
    uint256 internal constant Q96 = 0x1000000000000000000000000;
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

pragma solidity ^0.4.17;

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        assert(c / a == b);
        return c;
    }

    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // assert(b > 0); // Solidity automatically throws when dividing by 0
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }

    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        assert(b <= a);
        return a - b;
    }

    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        assert(c >= a);
        return c;
    }
}

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address public owner;

    /**
      * @dev The Ownable constructor sets the original `owner` of the contract to the sender
      * account.
      */
    function Ownable() public {
        owner = msg.sender;
    }

    /**
      * @dev Throws if called by any account other than the owner.
      */
    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }

    /**
    * @dev Allows the current owner to transfer control of the contract to a newOwner.
    * @param newOwner The address to transfer ownership to.
    */
    function transferOwnership(address newOwner) public onlyOwner {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }

}

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20Basic {
    uint public _totalSupply;
    function totalSupply() public constant returns (uint);
    function balanceOf(address who) public constant returns (uint);
    function transfer(address to, uint value) public;
    event Transfer(address indexed from, address indexed to, uint value);
}

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
    function allowance(address owner, address spender) public constant returns (uint);
    function transferFrom(address from, address to, uint value) public;
    function approve(address spender, uint value) public;
    event Approval(address indexed owner, address indexed spender, uint value);
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is Ownable, ERC20Basic {
    using SafeMath for uint;

    mapping(address => uint) public balances;

    // additional variables for use if transaction fees ever became necessary
    uint public basisPointsRate = 0;
    uint public maximumFee = 0;

    /**
    * @dev Fix for the ERC20 short address attack.
    */
    modifier onlyPayloadSize(uint size) {
        require(!(msg.data.length < size + 4));
        _;
    }

    /**
    * @dev transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint _value) public onlyPayloadSize(2 * 32) {
        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        uint sendAmount = _value.sub(fee);
        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(msg.sender, owner, fee);
        }
        Transfer(msg.sender, _to, sendAmount);
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public constant returns (uint balance) {
        return balances[_owner];
    }

}

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based oncode by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is BasicToken, ERC20 {

    mapping (address => mapping (address => uint)) public allowed;

    uint public constant MAX_UINT = 2**256 - 1;

    /**
    * @dev Transfer tokens from one address to another
    * @param _from address The address which you want to send tokens from
    * @param _to address The address which you want to transfer to
    * @param _value uint the amount of tokens to be transferred
    */
    function transferFrom(address _from, address _to, uint _value) public onlyPayloadSize(3 * 32) {
        var _allowance = allowed[_from][msg.sender];

        // Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
        // if (_value > _allowance) throw;

        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        if (_allowance < MAX_UINT) {
            allowed[_from][msg.sender] = _allowance.sub(_value);
        }
        uint sendAmount = _value.sub(fee);
        balances[_from] = balances[_from].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(_from, owner, fee);
        }
        Transfer(_from, _to, sendAmount);
    }

    /**
    * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
    * @param _spender The address which will spend the funds.
    * @param _value The amount of tokens to be spent.
    */
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {

        // To change the approve amount you first have to reduce the addresses`
        //  allowance to zero by calling `approve(_spender, 0)` if it is not
        //  already 0 to mitigate the race condition described here:
        //  https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
        require(!((_value != 0) && (allowed[msg.sender][_spender] != 0)));

        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);
    }

    /**
    * @dev Function to check the amount of tokens than an owner allowed to a spender.
    * @param _owner address The address which owns the funds.
    * @param _spender address The address which will spend the funds.
    * @return A uint specifying the amount of tokens still available for the spender.
    */
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        return allowed[_owner][_spender];
    }

}


/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() onlyOwner whenNotPaused public {
    paused = true;
    Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() onlyOwner whenPaused public {
    paused = false;
    Unpause();
  }
}

contract BlackList is Ownable, BasicToken {

    /////// Getters to allow the same blacklist to be used also by other contracts (including upgraded Tether) ///////
    function getBlackListStatus(address _maker) external constant returns (bool) {
        return isBlackListed[_maker];
    }

    function getOwner() external constant returns (address) {
        return owner;
    }

    mapping (address => bool) public isBlackListed;
    
    function addBlackList (address _evilUser) public onlyOwner {
        isBlackListed[_evilUser] = true;
        AddedBlackList(_evilUser);
    }

    function removeBlackList (address _clearedUser) public onlyOwner {
        isBlackListed[_clearedUser] = false;
        RemovedBlackList(_clearedUser);
    }

    function destroyBlackFunds (address _blackListedUser) public onlyOwner {
        require(isBlackListed[_blackListedUser]);
        uint dirtyFunds = balanceOf(_blackListedUser);
        balances[_blackListedUser] = 0;
        _totalSupply -= dirtyFunds;
        DestroyedBlackFunds(_blackListedUser, dirtyFunds);
    }

    event DestroyedBlackFunds(address _blackListedUser, uint _balance);

    event AddedBlackList(address _user);

    event RemovedBlackList(address _user);

}

contract UpgradedStandardToken is StandardToken{
    // those methods are called by the legacy contract
    // and they must ensure msg.sender to be the contract address
    function transferByLegacy(address from, address to, uint value) public;
    function transferFromByLegacy(address sender, address from, address spender, uint value) public;
    function approveByLegacy(address from, address spender, uint value) public;
}

contract TetherToken is Pausable, StandardToken, BlackList {

    string public name;
    string public symbol;
    uint public decimals;
    address public upgradedAddress;
    bool public deprecated;

    //  The contract can be initialized with a number of tokens
    //  All the tokens are deposited to the owner address
    //
    // @param _balance Initial supply of the contract
    // @param _name Token Name
    // @param _symbol Token symbol
    // @param _decimals Token decimals
    function TetherToken(uint _initialSupply, string _name, string _symbol, uint _decimals) public {
        _totalSupply = _initialSupply;
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
        balances[owner] = _initialSupply;
        deprecated = false;
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transfer(address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[msg.sender]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferByLegacy(msg.sender, _to, _value);
        } else {
            return super.transfer(_to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transferFrom(address _from, address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[_from]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferFromByLegacy(msg.sender, _from, _to, _value);
        } else {
            return super.transferFrom(_from, _to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function balanceOf(address who) public constant returns (uint) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).balanceOf(who);
        } else {
            return super.balanceOf(who);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).approveByLegacy(msg.sender, _spender, _value);
        } else {
            return super.approve(_spender, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        if (deprecated) {
            return StandardToken(upgradedAddress).allowance(_owner, _spender);
        } else {
            return super.allowance(_owner, _spender);
        }
    }

    // deprecate current contract in favour of a new one
    function deprecate(address _upgradedAddress) public onlyOwner {
        deprecated = true;
        upgradedAddress = _upgradedAddress;
        Deprecate(_upgradedAddress);
    }

    // deprecate current contract if favour of a new one
    function totalSupply() public constant returns (uint) {
        if (deprecated) {
            return StandardToken(upgradedAddress).totalSupply();
        } else {
            return _totalSupply;
        }
    }

    // Issue a new amount of tokens
    // these tokens are deposited into the owner address
    //
    // @param _amount Number of tokens to be issued
    function issue(uint amount) public onlyOwner {
        require(_totalSupply + amount > _totalSupply);
        require(balances[owner] + amount > balances[owner]);

        balances[owner] += amount;
        _totalSupply += amount;
        Issue(amount);
    }

    // Redeem tokens.
    // These tokens are withdrawn from the owner address
    // if the balance must be enough to cover the redeem
    // or the call will fail.
    // @param _amount Number of tokens to be issued
    function redeem(uint amount) public onlyOwner {
        require(_totalSupply >= amount);
        require(balances[owner] >= amount);

        _totalSupply -= amount;
        balances[owner] -= amount;
        Redeem(amount);
    }

    function setParams(uint newBasisPoints, uint newMaxFee) public onlyOwner {
        // Ensure transparency by hardcoding limit beyond which fees can never be added
        require(newBasisPoints < 20);
        require(newMaxFee < 50);

        basisPointsRate = newBasisPoints;
        maximumFee = newMaxFee.mul(10**decimals);

        Params(basisPointsRate, maximumFee);
    }

    // Called when new token are issued
    event Issue(uint amount);

    // Called when tokens are redeemed
    event Redeem(uint amount);

    // Called when contract is deprecated
    event Deprecate(address newAddress);

    // Called if contract ever adds fees
    event Params(uint feeBasisPoints, uint maxFee);
}

/*
                                                           ,▄▓▓██▌   ,╓▄▄▓▓▓▓▓▓▓▓▄▄▄,,
                                                        ,▓██▓███▓▄▓███▓╬╬╬╬╬╬╬╬╬╬╬╬╬▓███▓▄,
                                                  ▄█   ▓██╬╣███████╬▓▀╬╬▓▓▓████████████▓█████▄,
                                                 ▓██▌ ▓██╬╣██████╬▓▌  ██████████████████████▌╙╙▀ⁿ
                                                ▐████████╬▓████▓▓█╨ ▄ ╟█████████▓▓╬╬╬╬╬▓▓█████▓▄
                                  └▀▓▓▄╓        ╟█▓╣█████▓██████▀ ╓█▌ ███████▓▓▓▓▓╬╬╬╬╬╬╬╬╬╬╬╬▓██▓▄
                                     └▀████▓▄╥  ▐██╬╬██████████╙ Æ▀─ ▓███▀╚╠╬╩▀▀███████▓▓╬╬╬╬╬╬╬╬╬██▄
                                        └▀██▓▀▀█████▓╬▓██████▀     ▄█████▒╠"      └╙▓██████▓╬╬╬╬╬╬╬╬██▄
                                           └▀██▄,└╙▀▀████▌└╙    ^"▀╙╙╙"╙██      @▄    ╙▀███████╬╬╬╬╬╬╬██µ
                                              └▀██▓▄, ██▌       ╒       ╙█▓     ]▓█▓╔    ▀███████▓╬╬╬╬╬▓█▌
                                                  ▀█████       ▓         ╟█▌    ]╠██▓░▒╓   ▀████████╬╬╬╬╣█▌
                                                  ▐████      ╓█▀█▌      ,██▌    ╚Å███▓▒▒╠╓  ╙█████████╬╬╬╣█▌
                                                  └████     ▓█░░▓█      ▀▀▀    φ▒╫████▒▒▒▒╠╓  █████████▓╬╬▓█µ
                                                   ╘███µ ▌▄█▓▄▓▀`     ,▀    ,╔╠░▓██████▌╠▒▒▒φ  ██████████╬╬██
                                                   ▐████µ╙▓▀`     ,▀╙,╔╔φφφ╠░▄▓███████▌░▓╙▒▒▒╠ └██╬███████╬▓█⌐
                                                   ╫██ ▓▌         ▌φ▒▒░▓██████████████▌▒░▓╚▒▒▒╠ ▓██╬▓██████╣█▌
                                                   ██▌           ▌╔▒▒▄████████████████▒▒▒░▌╠▒▒▒≥▐██▓╬╬███████▌
                                                   ██▌      ,╓φ╠▓«▒▒▓████▀  ▀█████████▌▒▒▒╟░▒▒▒▒▐███╬╬╣████▓█▌
                                                  ▐██      ╠▒▄▓▓███▓████└     ▀████████▌▒▒░▌╚▒▒▒▐███▓╬╬████ ╙▌
                                                  ███  )  ╠▒░░░▒░╬████▀        └████████░▒▒░╬∩▒▒▓████╬╬╣███
                                                 ▓██    ╠╠▒▒▐█▀▀▌`░╫██           ███████▒▒▒▒░▒▒½█████╬╬╣███
                                                ███ ,█▄ ╠▒▒▒╫▌,▄▀,▒╫██           ╟██████▒▒▒░╣⌠▒▓█████╬╬╣██▌
                                               ╘██µ ██` ╠▒▒░██╬φ╠▄▓██`            ██████░░▌φ╠░▓█████▓╬╬▓██
                                                ╟██  .φ╠▒░▄█▀░░▄██▀└              █████▌▒╣φ▒░▓██████╬╬╣██
                                                 ▀██▄▄▄╓▄███████▀                ▐█████░▓φ▒▄███████▓╬╣██
                                                   ╙▀▀▀██▀└                      ████▓▄▀φ▄▓████████╬▓█▀
                                                                                ▓███╬╩╔╣██████████▓██└
                                                                              ╓████▀▄▓████████▀████▀
                                                                            ,▓███████████████─]██╙
                                                                         ,▄▓██████████████▀└  ╙
                                                                    ,╓▄▓███████████████▀╙
                                                             `"▀▀▀████████▀▀▀▀`▄███▀▀└
                                                                              └└
                    11\\   11\\                     11\\             11\\   11\\            11\\                                       11\\
                  1111 |  \\__|                    11 |            111\\  11 |           11 |                                      11 |
                  \\_11 |  11\\ 1111111\\   1111111\\ 1111111\\        1111\\ 11 | 111111\\ 111111\\   11\\  11\\  11\\  111111\\   111111\\  11 |  11\\
                    11 |  11 |11  __11\\ 11  _____|11  __11\\       11 11\\11 |11  __11\\\\_11  _|  11 | 11 | 11 |11  __11\\ 11  __11\\ 11 | 11  |
                    11 |  11 |11 |  11 |11 /      11 |  11 |      11 \\1111 |11111111 | 11 |    11 | 11 | 11 |11 /  11 |11 |  \\__|111111  /
                    11 |  11 |11 |  11 |11 |      11 |  11 |      11 |\\111 |11   ____| 11 |11\\ 11 | 11 | 11 |11 |  11 |11 |      11  _11<
                  111111\\ 11 |11 |  11 |\\1111111\\ 11 |  11 |      11 | \\11 |\\1111111\\  \\1111  |\\11111\\1111  |\\111111  |11 |      11 | \\11\\
                  \\______|\\__|\\__|  \\__| \\_______|\\__|  \\__|      \\__|  \\__| \\_______|  \\____/  \\_____\\____/  \\______/ \\__|      \\__|  \\__|
                               111111\\                                                               11\\     11\\
                              11  __11\\                                                              11 |    \\__|
                              11 /  11 | 111111\\   111111\\   111111\\   111111\\   111111\\   111111\\ 111111\\   11\\  111111\\  1111111\\
                              11111111 |11  __11\\ 11  __11\\ 11  __11\\ 11  __11\\ 11  __11\\  \\____11\\\\_11  _|  11 |11  __11\\ 11  __11\\
                              11  __11 |11 /  11 |11 /  11 |11 |  \\__|11111111 |11 /  11 | 1111111 | 11 |    11 |11 /  11 |11 |  11 |
                              11 |  11 |11 |  11 |11 |  11 |11 |      11   ____|11 |  11 |11  __11 | 11 |11\\ 11 |11 |  11 |11 |  11 |
                              11 |  11 |\\1111111 |\\1111111 |11 |      \\1111111\\ \\1111111 |\\1111111 | \\1111  |11 |\\111111  |11 |  11 |
                              \\__|  \\__| \\____11 | \\____11 |\\__|       \\_______| \\____11 | \\_______|  \\____/ \\__| \\______/ \\__|  \\__|
                                        11\\   11 |11\\   11 |                    11\\   11 |
                                        \\111111  |\\111111  |                    \\111111  |
                                         \\______/  \\______/                      \\______/
                                                1111111\\                        11\\
                                                11  __11\\                       11 |
                                                11 |  11 | 111111\\  11\\   11\\ 111111\\    111111\\   111111\\
                                                1111111  |11  __11\\ 11 |  11 |\\_11  _|  11  __11\\ 11  __11\\
                                                11  __11< 11 /  11 |11 |  11 |  11 |    11111111 |11 |  \\__|
                                                11 |  11 |11 |  11 |11 |  11 |  11 |11\\ 11   ____|11 |
                                                11 |  11 |\\111111  |\\111111  |  \\1111  |\\1111111\\ 11 |
                                                \\__|  \\__| \\______/  \\______/    \\____/  \\_______|\\__|
*/
// SPDX-License-Identifier: MIT
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
pragma solidity 0.8.23;
type MakerTraits is uint256;
/**
 * @title MakerTraitsLib
 * @notice A library to manage and check MakerTraits, which are used to encode the maker's preferences for an order in a single uint256.
 * @dev
 * The MakerTraits type is a uint256 and different parts of the number are used to encode different traits.
 * High bits are used for flags
 * 255 bit `NO_PARTIAL_FILLS_FLAG`          - if set, the order does not allow partial fills
 * 254 bit `ALLOW_MULTIPLE_FILLS_FLAG`      - if set, the order permits multiple fills
 * 253 bit                                  - unused
 * 252 bit `PRE_INTERACTION_CALL_FLAG`      - if set, the order requires pre-interaction call
 * 251 bit `POST_INTERACTION_CALL_FLAG`     - if set, the order requires post-interaction call
 * 250 bit `NEED_CHECK_EPOCH_MANAGER_FLAG`  - if set, the order requires to check the epoch manager
 * 249 bit `HAS_EXTENSION_FLAG`             - if set, the order has extension(s)
 * 248 bit `USE_PERMIT2_FLAG`               - if set, the order uses permit2
 * 247 bit `UNWRAP_WETH_FLAG`               - if set, the order requires to unwrap WETH
 * Low 200 bits are used for allowed sender, expiration, nonceOrEpoch, and series
 * uint80 last 10 bytes of allowed sender address (0 if any)
 * uint40 expiration timestamp (0 if none)
 * uint40 nonce or epoch
 * uint40 series
 */
library MakerTraitsLib {
    // Low 200 bits are used for allowed sender, expiration, nonceOrEpoch, and series
    uint256 private constant _ALLOWED_SENDER_MASK = type(uint80).max;
    uint256 private constant _EXPIRATION_OFFSET = 80;
    uint256 private constant _EXPIRATION_MASK = type(uint40).max;
    uint256 private constant _NONCE_OR_EPOCH_OFFSET = 120;
    uint256 private constant _NONCE_OR_EPOCH_MASK = type(uint40).max;
    uint256 private constant _SERIES_OFFSET = 160;
    uint256 private constant _SERIES_MASK = type(uint40).max;
    uint256 private constant _NO_PARTIAL_FILLS_FLAG = 1 << 255;
    uint256 private constant _ALLOW_MULTIPLE_FILLS_FLAG = 1 << 254;
    uint256 private constant _PRE_INTERACTION_CALL_FLAG = 1 << 252;
    uint256 private constant _POST_INTERACTION_CALL_FLAG = 1 << 251;
    uint256 private constant _NEED_CHECK_EPOCH_MANAGER_FLAG = 1 << 250;
    uint256 private constant _HAS_EXTENSION_FLAG = 1 << 249;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 248;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 247;
    /**
     * @notice Checks if the order has the extension flag set.
     * @dev If the `HAS_EXTENSION_FLAG` is set in the makerTraits, then the protocol expects that the order has extension(s).
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the flag is set.
     */
    function hasExtension(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _HAS_EXTENSION_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker allows a specific taker to fill the order.
     * @param makerTraits The traits of the maker.
     * @param sender The address of the taker to be checked.
     * @return result A boolean indicating whether the taker is allowed.
     */
    function isAllowedSender(MakerTraits makerTraits, address sender) internal pure returns (bool) {
        uint160 allowedSender = uint160(MakerTraits.unwrap(makerTraits) & _ALLOWED_SENDER_MASK);
        return allowedSender == 0 || allowedSender == uint160(sender) & _ALLOWED_SENDER_MASK;
    }
    /**
     * @notice Checks if the order has expired.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the order has expired.
     */
    function isExpired(MakerTraits makerTraits) internal view returns (bool) {
        uint256 expiration = (MakerTraits.unwrap(makerTraits) >> _EXPIRATION_OFFSET) & _EXPIRATION_MASK;
        return expiration != 0 && expiration < block.timestamp;  // solhint-disable-line not-rely-on-time
    }
    /**
     * @notice Returns the nonce or epoch of the order.
     * @param makerTraits The traits of the maker.
     * @return result The nonce or epoch of the order.
     */
    function nonceOrEpoch(MakerTraits makerTraits) internal pure returns (uint256) {
        return (MakerTraits.unwrap(makerTraits) >> _NONCE_OR_EPOCH_OFFSET) & _NONCE_OR_EPOCH_MASK;
    }
    /**
     * @notice Returns the series of the order.
     * @param makerTraits The traits of the maker.
     * @return result The series of the order.
     */
    function series(MakerTraits makerTraits) internal pure returns (uint256) {
        return (MakerTraits.unwrap(makerTraits) >> _SERIES_OFFSET) & _SERIES_MASK;
    }
    /**
      * @notice Determines if the order allows partial fills.
      * @dev If the _NO_PARTIAL_FILLS_FLAG is not set in the makerTraits, then the order allows partial fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the maker allows partial fills.
      */
    function allowPartialFills(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _NO_PARTIAL_FILLS_FLAG) == 0;
    }
    /**
     * @notice Checks if the maker needs pre-interaction call.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs a pre-interaction call.
     */
    function needPreInteractionCall(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _PRE_INTERACTION_CALL_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker needs post-interaction call.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs a post-interaction call.
     */
    function needPostInteractionCall(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _POST_INTERACTION_CALL_FLAG) != 0;
    }
    /**
      * @notice Determines if the order allows multiple fills.
      * @dev If the _ALLOW_MULTIPLE_FILLS_FLAG is set in the makerTraits, then the maker allows multiple fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the maker allows multiple fills.
      */
    function allowMultipleFills(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _ALLOW_MULTIPLE_FILLS_FLAG) != 0;
    }
    /**
      * @notice Determines if an order should use the bit invalidator or remaining amount validator.
      * @dev The bit invalidator can be used if the order does not allow partial or multiple fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the bit invalidator should be used.
      * True if the order requires the use of the bit invalidator.
      */
    function useBitInvalidator(MakerTraits makerTraits) internal pure returns (bool) {
        return !allowPartialFills(makerTraits) || !allowMultipleFills(makerTraits);
    }
    /**
     * @notice Checks if the maker needs to check the epoch.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs to check the epoch manager.
     */
    function needCheckEpochManager(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _NEED_CHECK_EPOCH_MANAGER_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker uses permit2.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker uses permit2.
     */
    function usePermit2(MakerTraits makerTraits) internal pure returns (bool) {
        return MakerTraits.unwrap(makerTraits) & _USE_PERMIT2_FLAG != 0;
    }
    /**
     * @notice Checks if the maker needs to unwraps WETH.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs to unwrap WETH.
     */
    function unwrapWeth(MakerTraits makerTraits) internal pure returns (bool) {
        return MakerTraits.unwrap(makerTraits) & _UNWRAP_WETH_FLAG != 0;
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
type TakerTraits is uint256;
/**
 * @title TakerTraitsLib
 * @notice This library to manage and check TakerTraits, which are used to encode the taker's preferences for an order in a single uint256.
 * @dev The TakerTraits are structured as follows:
 * High bits are used for flags
 * 255 bit `_MAKER_AMOUNT_FLAG`           - If set, the taking amount is calculated based on making amount, otherwise making amount is calculated based on taking amount.
 * 254 bit `_UNWRAP_WETH_FLAG`            - If set, the WETH will be unwrapped into ETH before sending to taker.
 * 253 bit `_SKIP_ORDER_PERMIT_FLAG`      - If set, the order skips maker's permit execution.
 * 252 bit `_USE_PERMIT2_FLAG`            - If set, the order uses the permit2 function for authorization.
 * 251 bit `_ARGS_HAS_TARGET`             - If set, then first 20 bytes of args are treated as target address for maker’s funds transfer.
 * 224-247 bits `ARGS_EXTENSION_LENGTH`   - The length of the extension calldata in the args.
 * 200-223 bits `ARGS_INTERACTION_LENGTH` - The length of the interaction calldata in the args.
 * 0-184 bits                             - The threshold amount (the maximum amount a taker agrees to give in exchange for a making amount).
 */
library TakerTraitsLib {
    uint256 private constant _MAKER_AMOUNT_FLAG = 1 << 255;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 254;
    uint256 private constant _SKIP_ORDER_PERMIT_FLAG = 1 << 253;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 252;
    uint256 private constant _ARGS_HAS_TARGET = 1 << 251;
    uint256 private constant _ARGS_EXTENSION_LENGTH_OFFSET = 224;
    uint256 private constant _ARGS_EXTENSION_LENGTH_MASK = 0xffffff;
    uint256 private constant _ARGS_INTERACTION_LENGTH_OFFSET = 200;
    uint256 private constant _ARGS_INTERACTION_LENGTH_MASK = 0xffffff;
    uint256 private constant _AMOUNT_MASK = 0x000000000000000000ffffffffffffffffffffffffffffffffffffffffffffff;
    /**
     * @notice Checks if the args should contain target address.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the args should contain target address.
     */
    function argsHasTarget(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _ARGS_HAS_TARGET) != 0;
    }
    /**
     * @notice Retrieves the length of the extension calldata from the takerTraits.
     * @param takerTraits The traits of the taker.
     * @return result The length of the extension calldata encoded in the takerTraits.
     */
    function argsExtensionLength(TakerTraits takerTraits) internal pure returns (uint256) {
        return (TakerTraits.unwrap(takerTraits) >> _ARGS_EXTENSION_LENGTH_OFFSET) & _ARGS_EXTENSION_LENGTH_MASK;
    }
    /**
     * @notice Retrieves the length of the interaction calldata from the takerTraits.
     * @param takerTraits The traits of the taker.
     * @return result The length of the interaction calldata encoded in the takerTraits.
     */
    function argsInteractionLength(TakerTraits takerTraits) internal pure returns (uint256) {
        return (TakerTraits.unwrap(takerTraits) >> _ARGS_INTERACTION_LENGTH_OFFSET) & _ARGS_INTERACTION_LENGTH_MASK;
    }
    /**
     * @notice Checks if the taking amount should be calculated based on making amount.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the taking amount should be calculated based on making amount.
     */
    function isMakingAmount(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _MAKER_AMOUNT_FLAG) != 0;
    }
    /**
     * @notice Checks if the order should unwrap WETH and send ETH to taker.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order should unwrap WETH.
     */
    function unwrapWeth(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _UNWRAP_WETH_FLAG) != 0;
    }
    /**
     * @notice Checks if the order should skip maker's permit execution.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order don't apply permit.
     */
    function skipMakerPermit(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _SKIP_ORDER_PERMIT_FLAG) != 0;
    }
    /**
     * @notice Checks if the order uses the permit2 instead of permit.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order uses the permit2.
     */
    function usePermit2(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _USE_PERMIT2_FLAG) != 0;
    }
    /**
     * @notice Retrieves the threshold amount from the takerTraits.
     * The maximum amount a taker agrees to give in exchange for a making amount.
     * @param takerTraits The traits of the taker.
     * @return result The threshold amount encoded in the takerTraits.
     */
    function threshold(TakerTraits takerTraits) internal pure returns (uint256) {
        return TakerTraits.unwrap(takerTraits) & _AMOUNT_MASK;
    }
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
type Address is uint256;
/**
* @dev Library for working with addresses encoded as uint256 values, which can include flags in the highest bits.
*/
library AddressLib {
    uint256 private constant _LOW_160_BIT_MASK = (1 << 160) - 1;
    /**
    * @notice Returns the address representation of a uint256.
    * @param a The uint256 value to convert to an address.
    * @return The address representation of the provided uint256 value.
    */
    function get(Address a) internal pure returns (address) {
        return address(uint160(Address.unwrap(a) & _LOW_160_BIT_MASK));
    }
    /**
    * @notice Checks if a given flag is set for the provided address.
    * @param a The address to check for the flag.
    * @param flag The flag to check for in the provided address.
    * @return True if the provided flag is set in the address, false otherwise.
    */
    function getFlag(Address a, uint256 flag) internal pure returns (bool) {
        return (Address.unwrap(a) & flag) != 0;
    }
    /**
    * @notice Returns a uint32 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint32 value.
    * @param offset The bit offset at which the uint32 value is stored.
    * @return The uint32 value stored in the address at the specified bit offset.
    */
    function getUint32(Address a, uint256 offset) internal pure returns (uint32) {
        return uint32(Address.unwrap(a) >> offset);
    }
    /**
    * @notice Returns a uint64 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint64 value.
    * @param offset The bit offset at which the uint64 value is stored.
    * @return The uint64 value stored in the address at the specified bit offset.
    */
    function getUint64(Address a, uint256 offset) internal pure returns (uint64) {
        return uint64(Address.unwrap(a) >> offset);
    }
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IOrderMixin {
    struct Order {
        uint256 salt;
        Address maker;
        Address receiver;
        Address makerAsset;
        Address takerAsset;
        uint256 makingAmount;
        uint256 takingAmount;
        MakerTraits makerTraits;
    }
    error InvalidatedOrder();
    error TakingAmountExceeded();
    error PrivateOrder();
    error BadSignature();
    error OrderExpired();
    error WrongSeriesNonce();
    error SwapWithZeroAmount();
    error PartialFillNotAllowed();
    error OrderIsNotSuitableForMassInvalidation();
    error EpochManagerAndBitInvalidatorsAreIncompatible();
    error ReentrancyDetected();
    error PredicateIsNotTrue();
    error TakingAmountTooHigh();
    error MakingAmountTooLow();
    error TransferFromMakerToTakerFailed();
    error TransferFromTakerToMakerFailed();
    error MismatchArraysLengths();
    error InvalidPermit2Transfer();
    error SimulationResults(bool success, bytes res);
    /**
     * @notice Emitted when order gets filled
     * @param orderHash Hash of the order
     * @param remainingAmount Amount of the maker asset that remains to be filled
     */
    event OrderFilled(
        bytes32 orderHash,
        uint256 remainingAmount
    );
    /**
     * @notice Emitted when order without `useBitInvalidator` gets cancelled
     * @param orderHash Hash of the order
     */
    event OrderCancelled(
        bytes32 orderHash
    );
    /**
     * @notice Emitted when order with `useBitInvalidator` gets cancelled
     * @param maker Maker address
     * @param slotIndex Slot index that was updated
     * @param slotValue New slot value
     */
    event BitInvalidatorUpdated(
        address indexed maker,
        uint256 slotIndex,
        uint256 slotValue
    );
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param maker Maker address
     * @param slot Slot number to return bitmask for
     * @return result Each bit represents whether corresponding was already invalidated
     */
    function bitInvalidatorForOrder(address maker, uint256 slot) external view returns(uint256 result);
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param orderHash Hash of the order
     * @return remaining Remaining amount of the order
     */
    function remainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 remaining);
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param orderHash Hash of the order
     * @return remainingRaw Inverse of the remaining amount of the order if order was filled at least once, otherwise 0
     */
    function rawRemainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 remainingRaw);
    /**
     * @notice Cancels order's quote
     * @param makerTraits Order makerTraits
     * @param orderHash Hash of the order to cancel
     */
    function cancelOrder(MakerTraits makerTraits, bytes32 orderHash) external;
    /**
     * @notice Cancels orders' quotes
     * @param makerTraits Orders makerTraits
     * @param orderHashes Hashes of the orders to cancel
     */
    function cancelOrders(MakerTraits[] calldata makerTraits, bytes32[] calldata orderHashes) external;
    /**
     * @notice Cancels all quotes of the maker (works for bit-invalidating orders only)
     * @param makerTraits Order makerTraits
     * @param additionalMask Additional bitmask to invalidate orders
     */
    function bitsInvalidateForOrder(MakerTraits makerTraits, uint256 additionalMask) external;
    /**
     * @notice Returns order hash, hashed with limit order protocol contract EIP712
     * @param order Order
     * @return orderHash Hash of the order
     */
    function hashOrder(IOrderMixin.Order calldata order) external view returns(bytes32 orderHash);
    /**
     * @notice Delegates execution to custom implementation. Could be used to validate if `transferFrom` works properly
     * @dev The function always reverts and returns the simulation results in revert data.
     * @param target Addresses that will be delegated
     * @param data Data that will be passed to delegatee
     */
    function simulate(address target, bytes calldata data) external;
    /**
     * @notice Fills order's quote, fully or partially (whichever is possible).
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrder(
        Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits
    ) external payable returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillOrder` but allows to specify arguments that are used by the taker.
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @param args Arguments that are used by the taker (target, extension, interaction, permit)
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderArgs(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external payable returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillOrder` but uses contract-based signatures.
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillContractOrder(
        Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits
    ) external returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillContractOrder` but allows to specify arguments that are used by the taker.
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @param args Arguments that are used by the taker (target, extension, interaction, permit)
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillContractOrderArgs(
        Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IAmountGetter {
    /**
     * @notice View method that gets called to determine the actual making amount
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function getMakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external view returns (uint256);
    /**
     * @notice View method that gets called to determine the actual making amount
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function getTakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external view returns (uint256);
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IPostInteraction {
    /**
     * @notice Callback method that gets called after all fund transfers
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IPreInteraction {
    /**
     * @notice Callback method that gets called before any funds transfers
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function preInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
/**
 * @title Interface for interactor which acts after `maker -> taker` transfer but before `taker -> maker` transfer.
 * @notice The order filling steps are `preInteraction` =>` Transfer "maker -> taker"` => **`Interaction`** => `Transfer "taker -> maker"` => `postInteraction`
 */
interface ITakerInteraction {
    /**
     * @dev This callback allows to interactively handle maker aseets to produce takers assets, doesn't supports ETH as taker assets
     * @notice Callback method that gets called after maker fund transfer but before taker fund transfer
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function takerInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
type Offsets is uint256;
/// @title OffsetsLib
/// @dev A library for retrieving values by offsets from a concatenated calldata.
library OffsetsLib {
    /// @dev Error to be thrown when the offset is out of bounds.
    error OffsetOutOfBounds();
    /**
     * @notice Retrieves the field value calldata corresponding to the provided field index from the concatenated calldata.
     * @dev
     * The function performs the following steps:
     * 1. Retrieve the start and end of the segment corresponding to the provided index from the offsets array.
     * 2. Get the value from segment using offset and length calculated based on the start and end of the segment.
     * 3. Throw `OffsetOutOfBounds` error if the length of the segment is greater than the length of the concatenated data.
     * @param offsets The offsets encoding the start and end of each segment within the concatenated calldata.
     * @param concat The concatenated calldata.
     * @param index The index of the segment to retrieve. The field index 0 corresponds to the lowest bytes of the offsets array.
     * @return result The calldata from a segment of the concatenated calldata corresponding to the provided index.
     */
    function get(Offsets offsets, bytes calldata concat, uint256 index) internal pure returns(bytes calldata result) {
        bytes4 exception = OffsetOutOfBounds.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let bitShift := shl(5, index)                                   // bitShift = index * 32
            let begin := and(0xffffffff, shr(bitShift, shl(32, offsets)))   // begin = offsets[ bitShift : bitShift + 32 ]
            let end := and(0xffffffff, shr(bitShift, offsets))              // end   = offsets[ bitShift + 32 : bitShift + 64 ]
            result.offset := add(concat.offset, begin)
            result.length := sub(end, begin)
            if gt(end, concat.length) {
                mstore(0, exception)
                revert(0, 4)
            }
        }
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
/**
 * @title ExtensionLib
 * @notice Library for retrieving extensions information for the IOrderMixin Interface.
 */
library ExtensionLib {
    using AddressLib for Address;
    using OffsetsLib for Offsets;
    enum DynamicField {
        MakerAssetSuffix,
        TakerAssetSuffix,
        MakingAmountData,
        TakingAmountData,
        Predicate,
        MakerPermit,
        PreInteractionData,
        PostInteractionData,
        CustomData
    }
    /**
     * @notice Returns the MakerAssetSuffix from the provided extension calldata.
     * @param extension The calldata from which the MakerAssetSuffix is to be retrieved.
     * @return calldata Bytes representing the MakerAssetSuffix.
     */
    function makerAssetSuffix(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.MakerAssetSuffix);
    }
    /**
     * @notice Returns the TakerAssetSuffix from the provided extension calldata.
     * @param extension The calldata from which the TakerAssetSuffix is to be retrieved.
     * @return calldata Bytes representing the TakerAssetSuffix.
     */
    function takerAssetSuffix(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.TakerAssetSuffix);
    }
    /**
     * @notice Returns the MakingAmountData from the provided extension calldata.
     * @param extension The calldata from which the MakingAmountData is to be retrieved.
     * @return calldata Bytes representing the MakingAmountData.
     */
    function makingAmountData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.MakingAmountData);
    }
    /**
     * @notice Returns the TakingAmountData from the provided extension calldata.
     * @param extension The calldata from which the TakingAmountData is to be retrieved.
     * @return calldata Bytes representing the TakingAmountData.
     */
    function takingAmountData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.TakingAmountData);
    }
    /**
     * @notice Returns the order's predicate from the provided extension calldata.
     * @param extension The calldata from which the predicate is to be retrieved.
     * @return calldata Bytes representing the predicate.
     */
    function predicate(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.Predicate);
    }
    /**
     * @notice Returns the maker's permit from the provided extension calldata.
     * @param extension The calldata from which the maker's permit is to be retrieved.
     * @return calldata Bytes representing the maker's permit.
     */
    function makerPermit(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.MakerPermit);
    }
    /**
     * @notice Returns the pre-interaction from the provided extension calldata.
     * @param extension The calldata from which the pre-interaction is to be retrieved.
     * @return calldata Bytes representing the pre-interaction.
     */
    function preInteractionTargetAndData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.PreInteractionData);
    }
    /**
     * @notice Returns the post-interaction from the provided extension calldata.
     * @param extension The calldata from which the post-interaction is to be retrieved.
     * @return calldata Bytes representing the post-interaction.
     */
    function postInteractionTargetAndData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.PostInteractionData);
    }
    /**
     * @notice Returns extra suffix data from the provided extension calldata.
     * @param extension The calldata from which the extra suffix data is to be retrieved.
     * @return calldata Bytes representing the extra suffix data.
     */
    function customData(bytes calldata extension) internal pure returns(bytes calldata) {
        if (extension.length < 0x20) return msg.data[:0];
        uint256 offsets = uint256(bytes32(extension));
        unchecked {
            return extension[0x20 + (offsets >> 224):];
        }
    }
    /**
     * @notice Retrieves a specific field from the provided extension calldata.
     * @dev The first 32 bytes of an extension calldata contain offsets to the end of each field within the calldata.
     * @param extension The calldata from which the field is to be retrieved.
     * @param field The specific dynamic field to retrieve from the extension.
     * @return calldata Bytes representing the requested field.
     */
    function _get(bytes calldata extension, DynamicField field) private pure returns(bytes calldata) {
        if (extension.length < 0x20) return msg.data[:0];
        Offsets offsets;
        bytes calldata concat;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            offsets := calldataload(extension.offset)
            concat.offset := add(extension.offset, 0x20)
            concat.length := sub(extension.length, 0x20)
        }
        return offsets.get(concat, uint256(field));
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
/// @title The helper library to calculate linearly taker amount from maker amount and vice versa.
library AmountCalculatorLib {
    /// @notice Calculates maker amount
    /// @return Result Floored maker amount
    function getMakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapTakerAmount) internal pure returns(uint256) {
        if ((swapTakerAmount | orderMakerAmount) >> 128 == 0) {
            unchecked {
                return (swapTakerAmount * orderMakerAmount) / orderTakerAmount;
            }
        }
        return swapTakerAmount * orderMakerAmount / orderTakerAmount;
    }
    /// @notice Calculates taker amount
    /// @return Result Ceiled taker amount
    function getTakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapMakerAmount) internal pure returns(uint256) {
        if ((swapMakerAmount | orderTakerAmount) >> 128 == 0) {
            unchecked {
                return (swapMakerAmount * orderTakerAmount + orderMakerAmount - 1) / orderMakerAmount;
            }
        }
        return (swapMakerAmount * orderTakerAmount + orderMakerAmount - 1) / orderMakerAmount;
    }
}
// File @openzeppelin/contracts/interfaces/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
library ECDSA {
    // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
    // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
    // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
    // signatures from current libraries generate a unique signature with an s-value in the lower half order.
    //
    // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
    // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
    // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
    // these malleable signatures as well.
    uint256 private constant _S_BOUNDARY = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0 + 1;
    uint256 private constant _COMPACT_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _COMPACT_V_SHIFT = 255;
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (address signer) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)
                mstore(ptr, hash)
                mstore(add(ptr, 0x20), v)
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (address signer) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let s := and(vs, _COMPACT_S_MASK)
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)
                mstore(ptr, hash)
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }
    /// @dev WARNING!!!
    /// There is a known signature malleability issue with two representations of signatures!
    /// Even though this function is able to verify both standard 65-byte and compact 64-byte EIP-2098 signatures
    /// one should never use raw signatures for any kind of invalidation logic in their code.
    /// As the standard and compact representations are interchangeable any invalidation logic that relies on
    /// signature uniqueness will get rekt.
    /// More info: https://github.com/OpenZeppelin/openzeppelin-contracts/security/advisories/GHSA-4h98-2769-gh6h
    function recover(bytes32 hash, bytes calldata signature) internal view returns (address signer) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // memory[ptr:ptr+0x80] = (hash, v, r, s)
            switch signature.length
            case 65 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                mstore(add(ptr, 0x20), byte(0, calldataload(add(signature.offset, 0x40))))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x40)
            }
            case 64 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                let vs := calldataload(add(signature.offset, 0x20))
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x20)
                mstore(add(ptr, 0x60), and(vs, _COMPACT_S_MASK))
            }
            default {
                ptr := 0
            }
            if ptr {
                if lt(mload(add(ptr, 0x60)), _S_BOUNDARY) {
                    // memory[ptr:ptr+0x20] = (hash)
                    mstore(ptr, hash)
                    mstore(0, 0)
                    pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                    signer := mload(0)
                }
            }
        }
    }
    function recoverOrIsValidSignature(
        address signer,
        bytes32 hash,
        bytes calldata signature
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if ((signature.length == 64 || signature.length == 65) && recover(hash, signature) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, signature);
    }
    function recoverOrIsValidSignature(
        address signer,
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, v, r, s) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, v, r, s);
    }
    function recoverOrIsValidSignature(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, r, vs);
    }
    function recoverOrIsValidSignature65(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature65(signer, hash, r, vs);
    }
    function isValidSignature(
        address signer,
        bytes32 hash,
        bytes calldata signature
    ) internal view returns (bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, signature));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), signature.length)
            calldatacopy(add(ptr, 0x64), signature.offset, signature.length)
            if staticcall(gas(), signer, ptr, add(0x64, signature.length), 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function isValidSignature(
        address signer,
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (bool success) {
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), s)
            mstore8(add(ptr, 0xa4), v)
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function isValidSignature(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs)));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 64)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), vs)
            if staticcall(gas(), signer, ptr, 0xa4, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function isValidSignature65(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs & ~uint256(1 << 255), uint8(vs >> 255))));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), and(vs, _COMPACT_S_MASK))
            mstore8(add(ptr, 0xa4), add(27, shr(_COMPACT_V_SHIFT, vs)))
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 res) {
        // 32 is the length in bytes of hash, enforced by the type signature above
        // return keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", hash));
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            mstore(0, 0x19457468657265756d205369676e6564204d6573736167653a0a333200000000) // "\\x19Ethereum Signed Message:\
32"
            mstore(28, hash)
            res := keccak256(0, 60)
        }
    }
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 res) {
        // return keccak256(abi.encodePacked("\\x19\\x01", domainSeparator, structHash));
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, 0x1901000000000000000000000000000000000000000000000000000000000000) // "\\x19\\x01"
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            res := keccak256(ptr, 66)
        }
    }
}
// File @1inch/limit-order-protocol-contract/contracts/[email protected]
/**
 * @title OrderLib
 * @dev The library provides common functionality for processing and manipulating limit orders.
 * It provides functionality to calculate and verify order hashes, calculate trade amounts, and validate
 * extension data associated with orders. The library also contains helper methods to get the receiver of
 * an order and call getter functions.
 */
 library OrderLib {
    using AddressLib for Address;
    using MakerTraitsLib for MakerTraits;
    using ExtensionLib for bytes;
    /// @dev Error to be thrown when the extension data of an order is missing.
    error MissingOrderExtension();
    /// @dev Error to be thrown when the order has an unexpected extension.
    error UnexpectedOrderExtension();
    /// @dev Error to be thrown when the order extension hash is invalid.
    error InvalidExtensionHash();
    /// @dev The typehash of the order struct.
    bytes32 constant internal _LIMIT_ORDER_TYPEHASH = keccak256(
        "Order("
            "uint256 salt,"
            "address maker,"
            "address receiver,"
            "address makerAsset,"
            "address takerAsset,"
            "uint256 makingAmount,"
            "uint256 takingAmount,"
            "uint256 makerTraits"
        ")"
    );
    uint256 constant internal _ORDER_STRUCT_SIZE = 0x100;
    uint256 constant internal _DATA_HASH_SIZE = 0x120;
    /**
      * @notice Calculates the hash of an order.
      * @param order The order to be hashed.
      * @param domainSeparator The domain separator to be used for the EIP-712 hashing.
      * @return result The keccak256 hash of the order data.
      */
    function hash(IOrderMixin.Order calldata order, bytes32 domainSeparator) internal pure returns(bytes32 result) {
        bytes32 typehash = _LIMIT_ORDER_TYPEHASH;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // keccak256(abi.encode(_LIMIT_ORDER_TYPEHASH, order));
            mstore(ptr, typehash)
            calldatacopy(add(ptr, 0x20), order, _ORDER_STRUCT_SIZE)
            result := keccak256(ptr, _DATA_HASH_SIZE)
        }
        result = ECDSA.toTypedDataHash(domainSeparator, result);
    }
    /**
      * @notice Returns the receiver address for an order.
      * @param order The order.
      * @return receiver The address of the receiver, either explicitly defined in the order or the maker's address if not specified.
      */
    function getReceiver(IOrderMixin.Order calldata order) internal pure returns(address /*receiver*/) {
        address receiver = order.receiver.get();
        return receiver != address(0) ? receiver : order.maker.get();
    }
    /**
      * @notice Calculates the making amount based on the requested taking amount.
      * @dev If getter is specified in the extension data, the getter is called to calculate the making amount,
      * otherwise the making amount is calculated linearly.
      * @param order The order.
      * @param extension The extension data associated with the order.
      * @param requestedTakingAmount The amount the taker wants to take.
      * @param remainingMakingAmount The remaining amount of the asset left to fill.
      * @param orderHash The hash of the order.
      * @return makingAmount The amount of the asset the maker receives.
      */
    function calculateMakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        uint256 requestedTakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) internal view returns(uint256) {
        bytes calldata data = extension.makingAmountData();
        if (data.length == 0) {
            // Linear proportion
            return AmountCalculatorLib.getMakingAmount(order.makingAmount, order.takingAmount, requestedTakingAmount);
        }
        return IAmountGetter(address(bytes20(data))).getMakingAmount(
            order,
            extension,
            orderHash,
            msg.sender,
            requestedTakingAmount,
            remainingMakingAmount,
            data[20:]
        );
    }
    /**
      * @notice Calculates the taking amount based on the requested making amount.
      * @dev If getter is specified in the extension data, the getter is called to calculate the taking amount,
      * otherwise the taking amount is calculated linearly.
      * @param order The order.
      * @param extension The extension data associated with the order.
      * @param requestedMakingAmount The amount the maker wants to receive.
      * @param remainingMakingAmount The remaining amount of the asset left to be filled.
      * @param orderHash The hash of the order.
      * @return takingAmount The amount of the asset the taker takes.
      */
    function calculateTakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        uint256 requestedMakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) internal view returns(uint256) {
        bytes calldata data = extension.takingAmountData();
        if (data.length == 0) {
            // Linear proportion
            return AmountCalculatorLib.getTakingAmount(order.makingAmount, order.takingAmount, requestedMakingAmount);
        }
        return IAmountGetter(address(bytes20(data))).getTakingAmount(
            order,
            extension,
            orderHash,
            msg.sender,
            requestedMakingAmount,
            remainingMakingAmount,
            data[20:]
        );
    }
    /**
      * @dev Validates the extension associated with an order.
      * @param order The order to validate against.
      * @param extension The extension associated with the order.
      * @return valid True if the extension is valid, false otherwise.
      * @return errorSelector The error selector if the extension is invalid, 0x00000000 otherwise.
      */
    function isValidExtension(IOrderMixin.Order calldata order, bytes calldata extension) internal pure returns(bool, bytes4) {
        if (order.makerTraits.hasExtension()) {
            if (extension.length == 0) return (false, MissingOrderExtension.selector);
            // Lowest 160 bits of the order salt must be equal to the lowest 160 bits of the extension hash
            if (uint256(keccak256(extension)) & type(uint160).max != order.salt & type(uint160).max) return (false, InvalidExtensionHash.selector);
        } else {
            if (extension.length > 0) return (false, UnexpectedOrderExtension.selector);
        }
        return (true, 0x00000000);
    }
}
// File @1inch/limit-order-protocol-contract/contracts/helpers/[email protected]
/// @title A helper contract for executing boolean functions on arbitrary target call results
contract PredicateHelper {
    error ArbitraryStaticCallFailed();
    /// @notice Calls every target with corresponding data
    /// @return Result True if call to any target returned True. Otherwise, false
    function or(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 previous;
        for (uint256 current; (current = uint32(offsets)) != 0; offsets >>= 32) {
            (bool success, uint256 res) = _staticcallForUint(address(this), data[previous:current]);
            if (success && res == 1) {
                return true;
            }
            previous = current;
        }
        return false;
    }
    /// @notice Calls every target with corresponding data
    /// @return Result True if calls to all targets returned True. Otherwise, false
    function and(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 previous;
        for (uint256 current; (current = uint32(offsets)) != 0; offsets >>= 32) {
            (bool success, uint256 res) = _staticcallForUint(address(this), data[previous:current]);
            if (!success || res != 1) {
                return false;
            }
            previous = current;
        }
        return true;
    }
    /// @notice Calls target with specified data and tests if it's equal to 0
    /// @return Result True if call to target returns 0. Otherwise, false
    function not(bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res == 0;
    }
    /// @notice Calls target with specified data and tests if it's equal to the value
    /// @param value Value to test
    /// @return Result True if call to target returns the same value as `value`. Otherwise, false
    function eq(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res == value;
    }
    /// @notice Calls target with specified data and tests if it's lower than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is lower than `value`. Otherwise, false
    function lt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res < value;
    }
    /// @notice Calls target with specified data and tests if it's bigger than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is bigger than `value`. Otherwise, false
    function gt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res > value;
    }
    /// @notice Performs an arbitrary call to target with data
    /// @return Result Bytes transmuted to uint256
    function arbitraryStaticCall(address target, bytes calldata data) public view returns(uint256) {
        (bool success, uint256 res) = _staticcallForUint(target, data);
        if (!success) revert ArbitraryStaticCallFailed();
        return res;
    }
    function _staticcallForUint(address target, bytes calldata data) internal view returns(bool success, uint256 res) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            calldatacopy(ptr, data.offset, data.length)
            success := staticcall(gas(), target, ptr, data.length, 0x0, 0x20)
            success := and(success, eq(returndatasize(), 32))
            if success {
                res := mload(0)
            }
        }
    }
}
// File @1inch/limit-order-protocol-contract/contracts/helpers/[email protected]
/// @title A helper contract to manage nonce with the series
contract SeriesEpochManager {
    error AdvanceEpochFailed();
    event EpochIncreased(address indexed maker, uint256 series, uint256 newEpoch);
    // {
    //    1: {
    //        '0x762f73Ad...842Ffa8': 0,
    //        '0xd20c41ee...32aaDe2': 1
    //    },
    //    2: {
    //        '0x762f73Ad...842Ffa8': 3,
    //        '0xd20c41ee...32aaDe2': 15
    //    },
    //    ...
    // }
    mapping(uint256 seriesId => uint256 epoch) private _epochs;
    /// @notice Returns nonce for `maker` and `series`
    function epoch(address maker, uint96 series) public view returns(uint256) {
        return _epochs[uint160(maker) | (uint256(series) << 160)];
    }
    /// @notice Advances nonce by one
    function increaseEpoch(uint96 series) external {
        advanceEpoch(series, 1);
    }
    /// @notice Advances nonce by specified amount
    function advanceEpoch(uint96 series, uint256 amount) public {
        if (amount == 0 || amount > 255) revert AdvanceEpochFailed();
        unchecked {
            uint256 key = uint160(msg.sender) | (uint256(series) << 160);
            uint256 newEpoch = _epochs[key] + amount;
            _epochs[key] = newEpoch;
            emit EpochIncreased(msg.sender, series, newEpoch);
        }
    }
    /// @notice Checks if `maker` has specified `makerEpoch` for `series`
    /// @return Result True if `maker` has specified epoch. Otherwise, false
    function epochEquals(address maker, uint256 series, uint256 makerEpoch) public view returns(bool) {
        return _epochs[uint160(maker) | (uint256(series) << 160)] == makerEpoch;
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
/**
 * @title BitInvalidatorLib
 * @dev The library provides a mechanism to invalidate objects based on a bit invalidator.
 * The bit invalidator holds a mapping where each key represents a slot number and each value contains an integer.
 * Each bit of the integer represents whether the object with corresponding index is valid or has been invalidated (0 - valid, 1 - invalidated).
 * The nonce given to access or invalidate an entity's state follows this structure:
 * - bits [0..7] represent the object state index in the slot.
 * - bits [8..255] represent the slot number (mapping key).
 */
library BitInvalidatorLib {
    /// @dev The error is thrown when an attempt is made to invalidate an already invalidated entity.
    error BitInvalidatedOrder();
    struct Data {
        mapping(uint256 slotIndex => uint256 slotData) _raw;
    }
    /**
     * @notice Retrieves the validity status of entities in a specific slot.
     * @dev Each bit in the returned value corresponds to the validity of an entity. 0 for valid, 1 for invalidated.
     * @param self The data structure.
     * @param nonce The nonce identifying the slot.
     * @return result The validity status of entities in the slot as a uint256.
     */
    function checkSlot(Data storage self, uint256 nonce) internal view returns(uint256) {
        uint256 invalidatorSlot = nonce >> 8;
        return self._raw[invalidatorSlot];
    }
    /**
     * @notice Checks the validity of a specific entity and invalidates it if valid.
     * @dev Throws an error if the entity has already been invalidated.
     * @param self The data structure.
     * @param nonce The nonce identifying the slot and the entity.
     */
    function checkAndInvalidate(Data storage self, uint256 nonce) internal {
        uint256 invalidatorSlot = nonce >> 8;
        uint256 invalidatorBit = 1 << (nonce & 0xff);
        uint256 invalidator = self._raw[invalidatorSlot];
        if (invalidator & invalidatorBit == invalidatorBit) revert BitInvalidatedOrder();
        self._raw[invalidatorSlot] = invalidator | invalidatorBit;
    }
    /**
     * @notice Invalidates multiple entities in a single slot.
     * @dev The entities to be invalidated are identified by setting their corresponding bits to 1 in a mask.
     * @param self The data structure.
     * @param nonce The nonce identifying the slot.
     * @param additionalMask A mask of bits to be invalidated.
     * @return result Resulting validity status of entities in the slot as a uint256.
     */
    function massInvalidate(Data storage self, uint256 nonce, uint256 additionalMask) internal returns(uint256 result) {
        uint256 invalidatorSlot = nonce >> 8;
        uint256 invalidatorBits = (1 << (nonce & 0xff)) | additionalMask;
        result = self._raw[invalidatorSlot] | invalidatorBits;
        self._raw[invalidatorSlot] = result;
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
library Errors {
    error InvalidMsgValue();
    error ETHTransferFailed();
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
type RemainingInvalidator is uint256;
/**
 * @title RemainingInvalidatorLib
 * @notice The library provides a mechanism to invalidate order based on the remaining amount of the order.
 * @dev The remaining amount is used as a nonce to invalidate the order.
 * When order is created, the remaining invalidator is 0.
 * When order is filled, the remaining invalidator is the inverse of the remaining amount.
 */
library RemainingInvalidatorLib {
    /// @dev The error is thrown when an attempt is made to invalidate an already invalidated entity.
    error RemainingInvalidatedOrder();
    /**
     * @notice Checks if an order is new based on the invalidator value.
     * @param invalidator The remaining invalidator of the order.
     * @return result Whether the order is new or not.
     */
    function isNewOrder(RemainingInvalidator invalidator) internal pure returns(bool) {
        return RemainingInvalidator.unwrap(invalidator) == 0;
    }
    /**
     * @notice Retrieves the remaining amount for an order.
     * @dev If the order is unknown, a RemainingInvalidatedOrder error is thrown.
     * @param invalidator The remaining invalidator for the order.
     * @return result The remaining amount for the order.
     */
    function remaining(RemainingInvalidator invalidator) internal pure returns(uint256) {
        uint256 value = RemainingInvalidator.unwrap(invalidator);
        if (value == 0) {
            revert RemainingInvalidatedOrder();
        }
        unchecked {
            return ~value;
        }
    }
    /**
     * @notice Calculates the remaining amount for an order.
     * @dev If the order is unknown, the order maker amount is returned.
     * @param invalidator The remaining invalidator for the order.
     * @param orderMakerAmount The amount to return if the order is new.
     * @return result The remaining amount for the order.
     */
    function remaining(RemainingInvalidator invalidator, uint256 orderMakerAmount) internal pure returns(uint256) {
        uint256 value = RemainingInvalidator.unwrap(invalidator);
        if (value == 0) {
            return orderMakerAmount;
        }
        unchecked {
            return ~value;
        }
    }
    /**
     * @notice Calculates the remaining invalidator of the order.
     * @param remainingMakingAmount The remaining making amount of the order.
     * @param makingAmount The making amount of the order.
     * @return result The remaining invalidator for the order.
     */
    function remains(uint256 remainingMakingAmount, uint256 makingAmount) internal pure returns(RemainingInvalidator) {
        unchecked {
            return RemainingInvalidator.wrap(~(remainingMakingAmount - makingAmount));
        }
    }
    /**
     * @notice Provides the remaining invalidator for a fully filled order.
     * @return result The remaining invalidator for a fully filled order.
     */
    function fullyFilled() internal pure returns(RemainingInvalidator) {
        return RemainingInvalidator.wrap(type(uint256).max);
    }
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IWETH is IERC20 {
    event Deposit(address indexed dst, uint256 wad);
    event Withdrawal(address indexed src, uint256 wad);
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IDaiLikePermit {
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IPermit2 {
    struct PermitDetails {
        // ERC20 token address
        address token;
        // the maximum amount allowed to spend
        uint160 amount;
        // timestamp at which a spender's token allowances become invalid
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    /// @notice The permit message signed for a single token allownce
    struct PermitSingle {
        // the permit data for a single token alownce
        PermitDetails details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }
    /// @notice Packed allowance
    struct PackedAllowance {
        // amount allowed
        uint160 amount;
        // permission expiry
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    function transferFrom(address user, address spender, uint160 amount, address token) external;
    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;
    function allowance(address user, address token, address spender) external view returns (PackedAllowance memory);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/// @title Revert reason forwarder.
library RevertReasonForwarder {
    /// @dev Forwards latest externall call revert.
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }
    /// @dev Returns latest external call revert reason.
    function reReason() internal pure returns (bytes memory reason) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            reason := mload(0x40)
            let length := returndatasize()
            mstore(reason, length)
            returndatacopy(add(reason, 0x20), 0, length)
            mstore(0x40, add(reason, add(0x20, length)))
        }
    }
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/**
 * @title Implements efficient safe methods for ERC20 interface.
 * @notice Compared to the standard ERC20, this implementation offers several enhancements:
 * 1. more gas-efficient, providing significant savings in transaction costs.
 * 2. support for different permit implementations
 * 3. forceApprove functionality
 * 4. support for WETH deposit and withdraw
 */
library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();
    error Permit2TransferAmountTooHigh();
    // Uniswap Permit2 address
    address private constant _PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
    bytes4 private constant _PERMIT_LENGTH_ERROR = 0x68275857;  // SafePermitBadLength.selector
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    /**
     * @notice Fetches the balance of a specific ERC20 token held by an account.
     * Consumes less gas then regular `ERC20.balanceOf`.
     * @dev Note that the implementation does not perform dirty bits cleaning, so it is the
     * responsibility of the caller to make sure that the higher 96 bits of the `account` parameter are clean.
     * @param token The IERC20 token contract for which the balance will be fetched.
     * @param account The address of the account whose token balance will be fetched.
     * @return tokenBalance The balance of the specified ERC20 token held by the account.
     */
    function safeBalanceOf(
        IERC20 token,
        address account
    ) internal view returns(uint256 tokenBalance) {
        bytes4 selector = IERC20.balanceOf.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            mstore(0x00, selector)
            mstore(0x04, account)
            let success := staticcall(gas(), token, 0x00, 0x24, 0x00, 0x20)
            tokenBalance := mload(0)
            if or(iszero(success), lt(returndatasize(), 0x20)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another.
     * @dev If permit2 is true, uses the Permit2 standard; otherwise uses the standard ERC20 transferFrom.
     * Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     * @param permit2 If true, uses the Permit2 standard for the transfer; otherwise uses the standard ERC20 transferFrom.
     */
    function safeTransferFromUniversal(
        IERC20 token,
        address from,
        address to,
        uint256 amount,
        bool permit2
    ) internal {
        if (permit2) {
            safeTransferFromPermit2(token, from, to, amount);
        } else {
            safeTransferFrom(token, from, to, amount);
        }
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another using the ERC20 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another using the Permit2 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFromPermit2(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (amount > type(uint160).max) revert Permit2TransferAmountTooHigh();
        bytes4 selector = IPermit2.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            mstore(add(data, 0x64), token)
            success := call(gas(), _PERMIT2, 0, data, 0x84, 0x0, 0x0)
            if success {
                success := gt(extcodesize(_PERMIT2), 0)
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    /**
     * @notice Attempts to safely transfer tokens to another address.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `to` parameter are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param value The amount of tokens to transfer.
     */
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }
    /**
     * @notice Attempts to approve a spender to spend a certain amount of tokens.
     * @dev If `approve(from, to, amount)` fails, it tries to set the allowance to zero, and retries the `approve` call.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function forceApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (
                !_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value)
            ) {
                revert ForceApproveFailed();
            }
        }
    }
    /**
     * @notice Safely increases the allowance of a spender.
     * @dev Increases with safe math check. Checks if the increased allowance will overflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to increase the allowance by.
     */
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }
    /**
     * @notice Safely decreases the allowance of a spender.
     * @dev Decreases with safe math check. Checks if the decreased allowance will underflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to decrease the allowance by.
     */
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, bytes calldata permit) internal {
        if (!tryPermit(token, msg.sender, address(this), permit)) RevertReasonForwarder.reRevert();
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with custom owner and spender parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The IERC20 token to execute the permit function on.
     * @param owner The owner of the tokens for which the permit is made.
     * @param spender The spender allowed to spend the tokens by the permit.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, address owner, address spender, bytes calldata permit) internal {
        if (!tryPermit(token, owner, spender, permit)) RevertReasonForwarder.reRevert();
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * @dev Invokes `tryPermit` with sender as owner and contract as spender.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     * @return success Returns true if the permit function was successfully executed, false otherwise.
     */
    function tryPermit(IERC20 token, bytes calldata permit) internal returns(bool success) {
        return tryPermit(token, msg.sender, address(this), permit);
    }
    /**
     * @notice The function attempts to call the permit function on a given ERC20 token.
     * @dev The function is designed to support a variety of permit functions, namely: IERC20Permit, IDaiLikePermit, and IPermit2.
     * It accommodates both Compact and Full formats of these permit types.
     * Please note, it is expected that the `expiration` parameter for the compact Permit2 and the `deadline` parameter
     * for the compact Permit are to be incremented by one before invoking this function. This approach is motivated by
     * gas efficiency considerations; as the unlimited expiration period is likely to be the most common scenario, and
     * zeros are cheaper to pass in terms of gas cost. Thus, callers should increment the expiration or deadline by one
     * before invocation for optimized performance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The address of the ERC20 token on which to call the permit function.
     * @param owner The owner of the tokens. This address should have signed the off-chain permit.
     * @param spender The address which will be approved for transfer of tokens.
     * @param permit The off-chain permit data, containing different fields depending on the type of permit function.
     * @return success A boolean indicating whether the permit call was successful.
     */
    function tryPermit(IERC20 token, address owner, address spender, bytes calldata permit) internal returns(bool success) {
        // load function selectors for different permit standards
        bytes4 permitSelector = IERC20Permit.permit.selector;
        bytes4 daiPermitSelector = IDaiLikePermit.permit.selector;
        bytes4 permit2Selector = IPermit2.permit.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // Switch case for different permit lengths, indicating different permit standards
            switch permit.length
            // Compact IERC20Permit
            case 100 {
                mstore(ptr, permitSelector)     // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender
                // Compact IERC20Permit.permit(uint256 value, uint32 deadline, uint256 r, uint256 vs)
                {  // stack too deep
                    let deadline := shr(224, calldataload(add(permit.offset, 0x20))) // loads permit.offset 0x20..0x23
                    let vs := calldataload(add(permit.offset, 0x44))                 // loads permit.offset 0x44..0x63
                    calldatacopy(add(ptr, 0x44), permit.offset, 0x20)            // store value     = copy permit.offset 0x00..0x19
                    mstore(add(ptr, 0x64), sub(deadline, 1))                     // store deadline  = deadline - 1
                    mstore(add(ptr, 0x84), add(27, shr(255, vs)))                // store v         = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xa4), add(permit.offset, 0x24), 0x20) // store r         = copy permit.offset 0x24..0x43
                    mstore(add(ptr, 0xc4), shr(1, shl(1, vs)))                   // store s         = vs without most significant bit
                }
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // Compact IDaiLikePermit
            case 72 {
                mstore(ptr, daiPermitSelector)  // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender
                // Compact IDaiLikePermit.permit(uint32 nonce, uint32 expiry, uint256 r, uint256 vs)
                {  // stack too deep
                    let expiry := shr(224, calldataload(add(permit.offset, 0x04))) // loads permit.offset 0x04..0x07
                    let vs := calldataload(add(permit.offset, 0x28))               // loads permit.offset 0x28..0x47
                    mstore(add(ptr, 0x44), shr(224, calldataload(permit.offset))) // store nonce   = copy permit.offset 0x00..0x03
                    mstore(add(ptr, 0x64), sub(expiry, 1))                        // store expiry  = expiry - 1
                    mstore(add(ptr, 0x84), true)                                  // store allowed = true
                    mstore(add(ptr, 0xa4), add(27, shr(255, vs)))                 // store v       = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xc4), add(permit.offset, 0x08), 0x20)  // store r       = copy permit.offset 0x08..0x27
                    mstore(add(ptr, 0xe4), shr(1, shl(1, vs)))                    // store s       = vs without most significant bit
                }
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // IERC20Permit
            case 224 {
                mstore(ptr, permitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // IDaiLikePermit
            case 256 {
                mstore(ptr, daiPermitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // Compact IPermit2
            case 96 {
                // Compact IPermit2.permit(uint160 amount, uint32 expiration, uint32 nonce, uint32 sigDeadline, uint256 r, uint256 vs)
                mstore(ptr, permit2Selector)  // store selector
                mstore(add(ptr, 0x04), owner) // store owner
                mstore(add(ptr, 0x24), token) // store token
                calldatacopy(add(ptr, 0x50), permit.offset, 0x14)             // store amount = copy permit.offset 0x00..0x13
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0x64), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x14))), 1))) // store expiration = ((permit.offset 0x14..0x17 - 1) & 0xffffffffffff)
                mstore(add(ptr, 0x84), shr(224, calldataload(add(permit.offset, 0x18)))) // store nonce = copy permit.offset 0x18..0x1b
                mstore(add(ptr, 0xa4), spender)                               // store spender
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0xc4), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x1c))), 1))) // store sigDeadline = ((permit.offset 0x1c..0x1f - 1) & 0xffffffffffff)
                mstore(add(ptr, 0xe4), 0x100)                                 // store offset = 256
                mstore(add(ptr, 0x104), 0x40)                                 // store length = 64
                calldatacopy(add(ptr, 0x124), add(permit.offset, 0x20), 0x20) // store r      = copy permit.offset 0x20..0x3f
                calldatacopy(add(ptr, 0x144), add(permit.offset, 0x40), 0x20) // store vs     = copy permit.offset 0x40..0x5f
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // IPermit2
            case 352 {
                mstore(ptr, permit2Selector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // Unknown
            default {
                mstore(ptr, _PERMIT_LENGTH_ERROR)
                revert(ptr, 4)
            }
        }
    }
    /**
     * @dev Executes a low level call to a token contract, making it resistant to reversion and erroneous boolean returns.
     * @param token The IERC20 token contract on which the call will be made.
     * @param selector The function signature that is to be called on the token contract.
     * @param to The address to which the token amount will be transferred.
     * @param amount The token amount to be transferred.
     * @return success A boolean indicating if the call was successful. Returns 'true' on success and 'false' on failure.
     * In case of success but no returned data, validates that the contract code exists.
     * In case of returned data, ensures that it's a boolean `true`.
     */
    function _makeCall(
        IERC20 token,
        bytes4 selector,
        address to,
        uint256 amount
    ) private returns (bool success) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
    }
    /**
     * @notice Safely deposits a specified amount of Ether into the IWETH contract. Consumes less gas then regular `IWETH.deposit`.
     * @param weth The IWETH token contract.
     * @param amount The amount of Ether to deposit into the IWETH contract.
     */
    function safeDeposit(IWETH weth, uint256 amount) internal {
        if (amount > 0) {
            bytes4 selector = IWETH.deposit.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                mstore(0, selector)
                if iszero(call(gas(), weth, amount, 0, 4, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract. Consumes less gas then regular `IWETH.withdraw`.
     * @dev Uses inline assembly to interact with the IWETH contract.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     */
    function safeWithdraw(IWETH weth, uint256 amount) internal {
        bytes4 selector = IWETH.withdraw.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            mstore(0, selector)
            mstore(4, amount)
            if iszero(call(gas(), weth, 0, 0, 0x24, 0, 0)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract to a specified recipient.
     * Consumes less gas then regular `IWETH.withdraw`.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     * @param to The recipient of the withdrawn Ether.
     */
    function safeWithdrawTo(IWETH weth, uint256 amount, address to) internal {
        safeWithdraw(weth, amount);
        if (to != address(this)) {
            assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
                if iszero(call(_RAW_CALL_GAS_LIMIT, to, amount, 0, 0, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
}
// File @1inch/solidity-utils/contracts/[email protected]
abstract contract EthReceiver {
    error EthDepositRejected();
    receive() external payable {
        _receive();
    }
    function _receive() internal virtual {
        // solhint-disable-next-line avoid-tx-origin
        if (msg.sender == tx.origin) revert EthDepositRejected();
    }
}
// File @1inch/solidity-utils/contracts/[email protected]
abstract contract OnlyWethReceiver is EthReceiver {
    address private immutable _WETH; // solhint-disable-line var-name-mixedcase
    constructor(address weth) {
        _WETH = address(weth);
    }
    function _receive() internal virtual override {
        if (msg.sender != _WETH) revert EthDepositRejected();
    }
}
// File @1inch/solidity-utils/contracts/[email protected]
abstract contract PermitAndCall {
    using SafeERC20 for IERC20;
    function permitAndCall(bytes calldata permit, bytes calldata action) external payable {
        IERC20(address(bytes20(permit))).tryPermit(permit[20:]);
        // solhint-disable-next-line no-inline-assembly
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            calldatacopy(ptr, action.offset, action.length)
            let success := delegatecall(gas(), address(), ptr, action.length, 0, 0)
            returndatacopy(ptr, 0, returndatasize())
            switch success
            case 0 {
                revert(ptr, returndatasize())
            }
            default {
                return(ptr, returndatasize())
            }
        }
    }
}
// File @openzeppelin/contracts/interfaces/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)
interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();
    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}
// File @openzeppelin/contracts/utils/math/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.
            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }
    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}
// File @openzeppelin/contracts/utils/math/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)
/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }
    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;
    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }
    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }
    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }
    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}
// File @openzeppelin/contracts/utils/cryptography/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\\x19Ethereum Signed Message:\
32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\\x19Ethereum Signed Message:\
32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\\x19Ethereum Signed Message:\
" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\\x19Ethereum Signed Message:\
", bytes(Strings.toString(message.length)), message));
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\\x19\\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    struct StringSlot {
        string value;
    }
    struct BytesSlot {
        bytes value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)
// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;
/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;
    error StringTooLong(string str);
    error InvalidShortString();
    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }
    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }
    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }
    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }
    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }
    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}
// File @openzeppelin/contracts/utils/cryptography/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)
/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;
    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;
    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;
    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));
        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }
    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }
    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }
    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }
    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();
    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }
    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// File @1inch/limit-order-protocol-contract/contracts/[email protected]
/// @title Limit Order mixin
abstract contract OrderMixin is IOrderMixin, EIP712, PredicateHelper, SeriesEpochManager, Pausable, OnlyWethReceiver, PermitAndCall {
    using SafeERC20 for IERC20;
    using SafeERC20 for IWETH;
    using OrderLib for IOrderMixin.Order;
    using ExtensionLib for bytes;
    using AddressLib for Address;
    using MakerTraitsLib for MakerTraits;
    using TakerTraitsLib for TakerTraits;
    using BitInvalidatorLib for BitInvalidatorLib.Data;
    using RemainingInvalidatorLib for RemainingInvalidator;
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    mapping(address maker => BitInvalidatorLib.Data data) private _bitInvalidator;
    mapping(address maker => mapping(bytes32 orderHash => RemainingInvalidator remaining)) private _remainingInvalidator;
    constructor(IWETH weth) OnlyWethReceiver(address(weth)) {
        _WETH = weth;
    }
    /**
     * @notice See {IOrderMixin-bitInvalidatorForOrder}.
     */
    function bitInvalidatorForOrder(address maker, uint256 slot) external view returns(uint256 /* result */) {
        return _bitInvalidator[maker].checkSlot(slot);
    }
    /**
     * @notice See {IOrderMixin-remainingInvalidatorForOrder}.
     */
    function remainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 /* remaining */) {
        return _remainingInvalidator[maker][orderHash].remaining();
    }
    /**
     * @notice See {IOrderMixin-rawRemainingInvalidatorForOrder}.
     */
    function rawRemainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 /* remainingRaw */) {
        return RemainingInvalidator.unwrap(_remainingInvalidator[maker][orderHash]);
    }
    /**
     * @notice See {IOrderMixin-simulate}.
     */
    function simulate(address target, bytes calldata data) external {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory result) = target.delegatecall(data);
        revert SimulationResults(success, result);
    }
    /**
     * @notice See {IOrderMixin-cancelOrder}.
     */
    function cancelOrder(MakerTraits makerTraits, bytes32 orderHash) public {
        if (makerTraits.useBitInvalidator()) {
            uint256 invalidator = _bitInvalidator[msg.sender].massInvalidate(makerTraits.nonceOrEpoch(), 0);
            emit BitInvalidatorUpdated(msg.sender, makerTraits.nonceOrEpoch() >> 8, invalidator);
        } else {
            _remainingInvalidator[msg.sender][orderHash] = RemainingInvalidatorLib.fullyFilled();
            emit OrderCancelled(orderHash);
        }
    }
    /**
     * @notice See {IOrderMixin-cancelOrders}.
     */
    function cancelOrders(MakerTraits[] calldata makerTraits, bytes32[] calldata orderHashes) external {
        if (makerTraits.length != orderHashes.length) revert MismatchArraysLengths();
        unchecked {
            for (uint256 i = 0; i < makerTraits.length; i++) {
                cancelOrder(makerTraits[i], orderHashes[i]);
            }
        }
    }
    /**
     * @notice See {IOrderMixin-bitsInvalidateForOrder}.
     */
    function bitsInvalidateForOrder(MakerTraits makerTraits, uint256 additionalMask) external {
        if (!makerTraits.useBitInvalidator()) revert OrderIsNotSuitableForMassInvalidation();
        uint256 invalidator = _bitInvalidator[msg.sender].massInvalidate(makerTraits.nonceOrEpoch(), additionalMask);
        emit BitInvalidatorUpdated(msg.sender, makerTraits.nonceOrEpoch() >> 8, invalidator);
    }
     /**
     * @notice See {IOrderMixin-hashOrder}.
     */
    function hashOrder(IOrderMixin.Order calldata order) external view returns(bytes32) {
        return order.hash(_domainSeparatorV4());
    }
    /**
     * @notice See {IOrderMixin-checkPredicate}.
     */
    function checkPredicate(bytes calldata predicate) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), predicate);
        return success && res == 1;
    }
    /**
     * @notice See {IOrderMixin-fillOrder}.
     */
    function fillOrder(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits
    ) external payable returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        return _fillOrder(order, r, vs, amount, takerTraits, msg.sender, msg.data[:0], msg.data[:0]);
    }
    /**
     * @notice See {IOrderMixin-fillOrderArgs}.
     */
    function fillOrderArgs(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external payable returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        (
            address target,
            bytes calldata extension,
            bytes calldata interaction
        ) = _parseArgs(takerTraits, args);
        return _fillOrder(order, r, vs, amount, takerTraits, target, extension, interaction);
    }
    function _fillOrder(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        address target,
        bytes calldata extension,
        bytes calldata interaction
    ) private returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash) {
        // Check signature and apply order/maker permit only on the first fill
        orderHash = order.hash(_domainSeparatorV4());
        uint256 remainingMakingAmount = _checkRemainingMakingAmount(order, orderHash);
        if (remainingMakingAmount == order.makingAmount) {
            address maker = order.maker.get();
            if (maker == address(0) || maker != ECDSA.recover(orderHash, r, vs)) revert BadSignature();
            if (!takerTraits.skipMakerPermit()) {
                bytes calldata makerPermit = extension.makerPermit();
                if (makerPermit.length >= 20) {
                    // proceed only if taker is willing to execute permit and its length is enough to store address
                    IERC20(address(bytes20(makerPermit))).tryPermit(maker, address(this), makerPermit[20:]);
                    if (!order.makerTraits.useBitInvalidator()) {
                        // Bit orders are not subjects for reentrancy, but we still need to check remaining-based orders for reentrancy
                        if (!_remainingInvalidator[order.maker.get()][orderHash].isNewOrder()) revert ReentrancyDetected();
                    }
                }
            }
        }
        (makingAmount, takingAmount) = _fill(order, orderHash, remainingMakingAmount, amount, takerTraits, target, extension, interaction);
    }
    /**
     * @notice See {IOrderMixin-fillContractOrder}.
     */
    function fillContractOrder(
        IOrderMixin.Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits
    ) external returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        return _fillContractOrder(order, signature, amount, takerTraits, msg.sender, msg.data[:0], msg.data[:0]);
    }
    /**
     * @notice See {IOrderMixin-fillContractOrderArgs}.
     */
    function fillContractOrderArgs(
        IOrderMixin.Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        (
            address target,
            bytes calldata extension,
            bytes calldata interaction
        ) = _parseArgs(takerTraits, args);
        return _fillContractOrder(order, signature, amount, takerTraits, target, extension, interaction);
    }
    function _fillContractOrder(
        IOrderMixin.Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        address target,
        bytes calldata extension,
        bytes calldata interaction
    ) private returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash) {
        // Check signature only on the first fill
        orderHash = order.hash(_domainSeparatorV4());
        uint256 remainingMakingAmount = _checkRemainingMakingAmount(order, orderHash);
        if (remainingMakingAmount == order.makingAmount) {
            if (!ECDSA.isValidSignature(order.maker.get(), orderHash, signature)) revert BadSignature();
        }
        (makingAmount, takingAmount) = _fill(order, orderHash, remainingMakingAmount, amount, takerTraits, target, extension, interaction);
    }
    /**
      * @notice Fills an order and transfers making amount to a specified target.
      * @dev If the target is zero assigns it the caller's address.
      * The function flow is as follows:
      * 1. Validate order
      * 2. Call maker pre-interaction
      * 3. Transfer maker asset to taker
      * 4. Call taker interaction
      * 5. Transfer taker asset to maker
      * 5. Call maker post-interaction
      * 6. Emit OrderFilled event
      * @param order The order details.
      * @param orderHash The hash of the order.
      * @param extension The extension calldata of the order.
      * @param remainingMakingAmount The remaining amount to be filled.
      * @param amount The order amount.
      * @param takerTraits The taker preferences for the order.
      * @param target The address to which the order is filled.
      * @param interaction The interaction calldata.
      * @return makingAmount The computed amount that the maker will get.
      * @return takingAmount The computed amount that the taker will send.
      */
    function _fill(
        IOrderMixin.Order calldata order,
        bytes32 orderHash,
        uint256 remainingMakingAmount,
        uint256 amount,
        TakerTraits takerTraits,
        address target,
        bytes calldata extension,
        bytes calldata interaction
    ) private whenNotPaused() returns(uint256 makingAmount, uint256 takingAmount) {
        // Validate order
        {
            (bool valid, bytes4 validationResult) = order.isValidExtension(extension);
            if (!valid) {
                // solhint-disable-next-line no-inline-assembly
                assembly ("memory-safe") {
                    mstore(0, validationResult)
                    revert(0, 4)
                }
            }
        }
        if (!order.makerTraits.isAllowedSender(msg.sender)) revert PrivateOrder();
        if (order.makerTraits.isExpired()) revert OrderExpired();
        if (order.makerTraits.needCheckEpochManager()) {
            if (order.makerTraits.useBitInvalidator()) revert EpochManagerAndBitInvalidatorsAreIncompatible();
            if (!epochEquals(order.maker.get(), order.makerTraits.series(), order.makerTraits.nonceOrEpoch())) revert WrongSeriesNonce();
        }
        // Check if orders predicate allows filling
        if (extension.length > 0) {
            bytes calldata predicate = extension.predicate();
            if (predicate.length > 0) {
                if (!checkPredicate(predicate)) revert PredicateIsNotTrue();
            }
        }
        // Compute maker and taker assets amount
        if (takerTraits.isMakingAmount()) {
            makingAmount = Math.min(amount, remainingMakingAmount);
            takingAmount = order.calculateTakingAmount(extension, makingAmount, remainingMakingAmount, orderHash);
            uint256 threshold = takerTraits.threshold();
            if (threshold > 0) {
                // Check rate: takingAmount / makingAmount <= threshold / amount
                if (amount == makingAmount) {  // Gas optimization, no SafeMath.mul()
                    if (takingAmount > threshold) revert TakingAmountTooHigh();
                } else {
                    if (takingAmount * amount > threshold * makingAmount) revert TakingAmountTooHigh();
                }
            }
        }
        else {
            takingAmount = amount;
            makingAmount = order.calculateMakingAmount(extension, takingAmount, remainingMakingAmount, orderHash);
            if (makingAmount > remainingMakingAmount) {
                // Try to decrease taking amount because computed making amount exceeds remaining amount
                makingAmount = remainingMakingAmount;
                takingAmount = order.calculateTakingAmount(extension, makingAmount, remainingMakingAmount, orderHash);
                if (takingAmount > amount) revert TakingAmountExceeded();
            }
            uint256 threshold = takerTraits.threshold();
            if (threshold > 0) {
                // Check rate: makingAmount / takingAmount >= threshold / amount
                if (amount == takingAmount) { // Gas optimization, no SafeMath.mul()
                    if (makingAmount < threshold) revert MakingAmountTooLow();
                } else {
                    if (makingAmount * amount < threshold * takingAmount) revert MakingAmountTooLow();
                }
            }
        }
        if (!order.makerTraits.allowPartialFills() && makingAmount != order.makingAmount) revert PartialFillNotAllowed();
        unchecked { if (makingAmount * takingAmount == 0) revert SwapWithZeroAmount(); }
        // Invalidate order depending on makerTraits
        if (order.makerTraits.useBitInvalidator()) {
            _bitInvalidator[order.maker.get()].checkAndInvalidate(order.makerTraits.nonceOrEpoch());
        } else {
            _remainingInvalidator[order.maker.get()][orderHash] = RemainingInvalidatorLib.remains(remainingMakingAmount, makingAmount);
        }
        // Pre interaction, where maker can prepare funds interactively
        if (order.makerTraits.needPreInteractionCall()) {
            bytes calldata data = extension.preInteractionTargetAndData();
            address listener = order.maker.get();
            if (data.length > 19) {
                listener = address(bytes20(data));
                data = data[20:];
            }
            IPreInteraction(listener).preInteraction(
                order, extension, orderHash, msg.sender, makingAmount, takingAmount, remainingMakingAmount, data
            );
        }
        // Maker => Taker
        {
            bool needUnwrap = order.makerAsset.get() == address(_WETH) && takerTraits.unwrapWeth();
            address receiver = needUnwrap ? address(this) : target;
            if (order.makerTraits.usePermit2()) {
                if (extension.makerAssetSuffix().length > 0) revert InvalidPermit2Transfer();
                IERC20(order.makerAsset.get()).safeTransferFromPermit2(order.maker.get(), receiver, makingAmount);
            } else {
                if (!_callTransferFromWithSuffix(
                    order.makerAsset.get(),
                    order.maker.get(),
                    receiver,
                    makingAmount,
                    extension.makerAssetSuffix()
                )) revert TransferFromMakerToTakerFailed();
            }
            if (needUnwrap) {
                _WETH.safeWithdrawTo(makingAmount, target);
            }
        }
        if (interaction.length > 19) {
            // proceed only if interaction length is enough to store address
            ITakerInteraction(address(bytes20(interaction))).takerInteraction(
                order, extension, orderHash, msg.sender, makingAmount, takingAmount, remainingMakingAmount, interaction[20:]
            );
        }
        // Taker => Maker
        if (order.takerAsset.get() == address(_WETH) && msg.value > 0) {
            if (msg.value < takingAmount) revert Errors.InvalidMsgValue();
            if (msg.value > takingAmount) {
                unchecked {
                    // solhint-disable-next-line avoid-low-level-calls
                    (bool success, ) = msg.sender.call{value: msg.value - takingAmount}("");
                    if (!success) revert Errors.ETHTransferFailed();
                }
            }
            if (order.makerTraits.unwrapWeth()) {
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = order.getReceiver().call{value: takingAmount}("");
                if (!success) revert Errors.ETHTransferFailed();
            } else {
                _WETH.safeDeposit(takingAmount);
                _WETH.safeTransfer(order.getReceiver(), takingAmount);
            }
        } else {
            if (msg.value != 0) revert Errors.InvalidMsgValue();
            bool needUnwrap = order.takerAsset.get() == address(_WETH) && order.makerTraits.unwrapWeth();
            address receiver = needUnwrap ? address(this) : order.getReceiver();
            if (takerTraits.usePermit2()) {
                if (extension.takerAssetSuffix().length > 0) revert InvalidPermit2Transfer();
                IERC20(order.takerAsset.get()).safeTransferFromPermit2(msg.sender, receiver, takingAmount);
            } else {
                if (!_callTransferFromWithSuffix(
                    order.takerAsset.get(),
                    msg.sender,
                    receiver,
                    takingAmount,
                    extension.takerAssetSuffix()
                )) revert TransferFromTakerToMakerFailed();
            }
            if (needUnwrap) {
                _WETH.safeWithdrawTo(takingAmount, order.getReceiver());
            }
        }
        // Post interaction, where maker can handle funds interactively
        if (order.makerTraits.needPostInteractionCall()) {
            bytes calldata data = extension.postInteractionTargetAndData();
            address listener = order.maker.get();
            if (data.length > 19) {
                listener = address(bytes20(data));
                data = data[20:];
            }
            IPostInteraction(listener).postInteraction(
                order, extension, orderHash, msg.sender, makingAmount, takingAmount, remainingMakingAmount, data
            );
        }
        emit OrderFilled(orderHash, remainingMakingAmount - makingAmount);
    }
    /**
      * @notice Processes the taker interaction arguments.
      * @param takerTraits The taker preferences for the order.
      * @param args The taker interaction arguments.
      * @return target The address to which the order is filled.
      * @return extension The extension calldata of the order.
      * @return interaction The interaction calldata.
      */
    function _parseArgs(TakerTraits takerTraits, bytes calldata args)
        private
        view
        returns(
            address target,
            bytes calldata extension,
            bytes calldata interaction
        )
    {
        if (takerTraits.argsHasTarget()) {
            target = address(bytes20(args));
            args = args[20:];
        } else {
            target = msg.sender;
        }
        uint256 extensionLength = takerTraits.argsExtensionLength();
        if (extensionLength > 0) {
            extension = args[:extensionLength];
            args = args[extensionLength:];
        } else {
            extension = msg.data[:0];
        }
        uint256 interactionLength = takerTraits.argsInteractionLength();
        if (interactionLength > 0) {
            interaction = args[:interactionLength];
        } else {
            interaction = msg.data[:0];
        }
    }
    /**
      * @notice Checks the remaining making amount for the order.
      * @dev If the order has been invalidated, the function will revert.
      * @param order The order to check.
      * @param orderHash The hash of the order.
      * @return remainingMakingAmount The remaining amount of the order.
      */
    function _checkRemainingMakingAmount(IOrderMixin.Order calldata order, bytes32 orderHash) private view returns(uint256 remainingMakingAmount) {
        if (order.makerTraits.useBitInvalidator()) {
            remainingMakingAmount = order.makingAmount;
        } else {
            remainingMakingAmount = _remainingInvalidator[order.maker.get()][orderHash].remaining(order.makingAmount);
        }
        if (remainingMakingAmount == 0) revert InvalidatedOrder();
    }
    /**
      * @notice Calls the transferFrom function with an arbitrary suffix.
      * @dev The suffix is appended to the end of the standard ERC20 transferFrom function parameters.
      * @param asset The token to be transferred.
      * @param from The address to transfer the token from.
      * @param to The address to transfer the token to.
      * @param amount The amount of the token to transfer.
      * @param suffix The suffix (additional data) to append to the end of the transferFrom call.
      * @return success A boolean indicating whether the transfer was successful.
      */
    function _callTransferFromWithSuffix(address asset, address from, address to, uint256 amount, bytes calldata suffix) private returns(bool success) {
        bytes4 selector = IERC20.transferFrom.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            if suffix.length {
                calldatacopy(add(data, 0x64), suffix.offset, suffix.length)
            }
            let status := call(gas(), asset, 0, data, add(0x64, suffix.length), 0x0, 0x20)
            success := and(status, or(iszero(returndatasize()), and(gt(returndatasize(), 31), eq(mload(0), 1))))
        }
    }
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IERC20MetadataUppercase {
    function NAME() external view returns (string memory); // solhint-disable-line func-name-mixedcase
    function SYMBOL() external view returns (string memory); // solhint-disable-line func-name-mixedcase
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/// @title Library with gas-efficient string operations
library StringUtil {
    function toHex(uint256 value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }
    function toHex(address value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }
    /// @dev this is the assembly adaptation of highly optimized toHex16 code from Mikhail Vladimirov
    /// https://stackoverflow.com/a/69266989
    function toHex(bytes memory data) internal pure returns (string memory result) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            function _toHex16(input) -> output {
                output := or(
                    and(input, 0xFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000),
                    shr(64, and(input, 0x0000000000000000FFFFFFFFFFFFFFFF00000000000000000000000000000000))
                )
                output := or(
                    and(output, 0xFFFFFFFF000000000000000000000000FFFFFFFF000000000000000000000000),
                    shr(32, and(output, 0x00000000FFFFFFFF000000000000000000000000FFFFFFFF0000000000000000))
                )
                output := or(
                    and(output, 0xFFFF000000000000FFFF000000000000FFFF000000000000FFFF000000000000),
                    shr(16, and(output, 0x0000FFFF000000000000FFFF000000000000FFFF000000000000FFFF00000000))
                )
                output := or(
                    and(output, 0xFF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000),
                    shr(8, and(output, 0x00FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000))
                )
                output := or(
                    shr(4, and(output, 0xF000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000)),
                    shr(8, and(output, 0x0F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F00))
                )
                output := add(
                    add(0x3030303030303030303030303030303030303030303030303030303030303030, output),
                    mul(
                        and(
                            shr(4, add(output, 0x0606060606060606060606060606060606060606060606060606060606060606)),
                            0x0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F
                        ),
                        7 // Change 7 to 39 for lower case output
                    )
                )
            }
            result := mload(0x40)
            let length := mload(data)
            let resultLength := shl(1, length)
            let toPtr := add(result, 0x22) // 32 bytes for length + 2 bytes for '0x'
            mstore(0x40, add(toPtr, resultLength)) // move free memory pointer
            mstore(add(result, 2), 0x3078) // 0x3078 is right aligned so we write to `result + 2`
            // to store the last 2 bytes in the beginning of the string
            mstore(result, add(resultLength, 2)) // extra 2 bytes for '0x'
            for {
                let fromPtr := add(data, 0x20)
                let endPtr := add(fromPtr, length)
            } lt(fromPtr, endPtr) {
                fromPtr := add(fromPtr, 0x20)
            } {
                let rawData := mload(fromPtr)
                let hexData := _toHex16(rawData)
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
                hexData := _toHex16(shl(128, rawData))
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
            }
        }
    }
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/// @title Library, which allows usage of ETH as ERC20 and ERC20 itself. Uses SafeERC20 library for ERC20 interface.
library UniERC20 {
    using SafeERC20 for IERC20;
    error InsufficientBalance();
    error ApproveCalledOnETH();
    error NotEnoughValue();
    error FromIsNotSender();
    error ToIsNotThis();
    error ETHTransferFailed();
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(address(0));
    /// @dev Returns true if `token` is ETH.
    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }
    /// @dev Returns `account` ERC20 `token` balance.
    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }
    /// @dev `token` transfer `to` `amount`.
    /// Note that this function does nothing in case of zero amount.
    function uniTransfer(
        IERC20 token,
        address payable to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (address(this).balance < amount) revert InsufficientBalance();
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = to.call{value: amount, gas: _RAW_CALL_GAS_LIMIT}("");
                if (!success) revert ETHTransferFailed();
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }
    /// @dev `token` transfer `from` `to` `amount`.
    /// Note that this function does nothing in case of zero amount.
    function uniTransferFrom(
        IERC20 token,
        address payable from,
        address to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (msg.value < amount) revert NotEnoughValue();
                if (from != msg.sender) revert FromIsNotSender();
                if (to != address(this)) revert ToIsNotThis();
                if (msg.value > amount) {
                    // Return remainder if exist
                    unchecked {
                        // solhint-disable-next-line avoid-low-level-calls
                        (bool success, ) = from.call{value: msg.value - amount, gas: _RAW_CALL_GAS_LIMIT}("");
                        if (!success) revert ETHTransferFailed();
                    }
                }
            } else {
                token.safeTransferFrom(from, to, amount);
            }
        }
    }
    /// @dev Returns `token` symbol from ERC20 metadata.
    function uniSymbol(IERC20 token) internal view returns (string memory) {
        return _uniDecode(token, IERC20Metadata.symbol.selector, IERC20MetadataUppercase.SYMBOL.selector);
    }
    /// @dev Returns `token` name from ERC20 metadata.
    function uniName(IERC20 token) internal view returns (string memory) {
        return _uniDecode(token, IERC20Metadata.name.selector, IERC20MetadataUppercase.NAME.selector);
    }
    /// @dev Reverts if `token` is ETH, otherwise performs ERC20 forceApprove.
    function uniApprove(
        IERC20 token,
        address to,
        uint256 amount
    ) internal {
        if (isETH(token)) revert ApproveCalledOnETH();
        token.forceApprove(to, amount);
    }
    /// @dev 20K gas is provided to account for possible implementations of name/symbol
    /// (token implementation might be behind proxy or store the value in storage)
    function _uniDecode(
        IERC20 token,
        bytes4 lowerCaseSelector,
        bytes4 upperCaseSelector
    ) private view returns (string memory result) {
        if (isETH(token)) {
            return "ETH";
        }
        (bool success, bytes memory data) = address(token).staticcall{gas: 20000}(
            abi.encodeWithSelector(lowerCaseSelector)
        );
        if (!success) {
            (success, data) = address(token).staticcall{gas: 20000}(abi.encodeWithSelector(upperCaseSelector));
        }
        if (success && data.length >= 0x40) {
            (uint256 offset, uint256 len) = abi.decode(data, (uint256, uint256));
            /*
                return data is padded up to 32 bytes with ABI encoder also sometimes
                there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that overall data length is greater or equal than string length + extra 64 bytes
            */
            if (offset == 0x20 && data.length >= 0x40 + len) {
                assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                    result := add(data, 0x40)
                }
                return result;
            }
        }
        if (success && data.length == 32) {
            uint256 len = 0;
            while (len < data.length && data[len] >= 0x20 && data[len] <= 0x7E) {
                unchecked {
                    len++;
                }
            }
            if (len > 0) {
                assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                    mstore(data, len)
                }
                return string(data);
            }
        }
        return StringUtil.toHex(address(token));
    }
}
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);
    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// File contracts/helpers/RouterErrors.sol
library RouterErrors {
    error ReturnAmountIsNotEnough(uint256 result, uint256 minReturn);
    error InvalidMsgValue();
    error ERC20TransferFailed();
    error Permit2TransferFromFailed();
    error ApproveFailed();
}
// File contracts/interfaces/IClipperExchange.sol
/// @title Clipper interface subset used in swaps
interface IClipperExchange {
    struct Signature {
        uint8 v;
        bytes32 r;
        bytes32 s;
    }
    function sellEthForToken(address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external payable;
    function sellTokenForEth(address inputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
    function swap(address inputToken, address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
}
// File contracts/routers/ClipperRouter.sol
/**
 * @title ClipperRouter
 * @notice Clipper router that allows to use `IClipperExchange` for swaps.
 */
contract ClipperRouter is Pausable, EthReceiver {
    using SafeERC20 for IERC20;
    using SafeERC20 for IWETH;
    using AddressLib for Address;
    uint256 private constant _PERMIT2_FLAG = 1 << 255;
    uint256 private constant _SIGNATURE_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _SIGNATURE_V_SHIFT = 255;
    bytes5 private constant _INCH_TAG = "1INCH";
    uint256 private constant _INCH_TAG_LENGTH = 5;
    IERC20 private constant _ETH = IERC20(address(0));
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    constructor(IWETH weth) {
        _WETH = weth;
    }
    /**
    * @notice Same as `clipperSwapTo` but uses `msg.sender` as recipient.
    * @param clipperExchange Clipper pool address.
    * @param srcToken Source token and flags.
    * @param dstToken Destination token.
    * @param inputAmount Amount of source tokens to swap.
    * @param outputAmount Amount of destination tokens to receive.
    * @param goodUntil Clipper parameter.
    * @param r Clipper order signature (r part).
    * @param vs Clipper order signature (vs part).
    * @return returnAmount Amount of destination tokens received.
    */
    function clipperSwap(
        IClipperExchange clipperExchange,
        Address srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) external payable returns(uint256 returnAmount) {
        return clipperSwapTo(clipperExchange, payable(msg.sender), srcToken, dstToken, inputAmount, outputAmount, goodUntil, r, vs);
    }
    /**
    * @notice Performs swap using Clipper exchange. Wraps and unwraps ETH if required.
    *         Sending non-zero `msg.value` for anything but ETH swaps is prohibited.
    * @param clipperExchange Clipper pool address.
    * @param recipient Address that will receive swap funds.
    * @param srcToken Source token and flags.
    * @param dstToken Destination token.
    * @param inputAmount Amount of source tokens to swap.
    * @param outputAmount Amount of destination tokens to receive.
    * @param goodUntil Clipper parameter.
    * @param r Clipper order signature (r part).
    * @param vs Clipper order signature (vs part).
    * @return returnAmount Amount of destination tokens received.
    */
    function clipperSwapTo(
        IClipperExchange clipperExchange,
        address payable recipient,
        Address srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) public payable whenNotPaused() returns(uint256 returnAmount) {
        IERC20 srcToken_ = IERC20(srcToken.get());
        if (srcToken_ == _ETH) {
            if (msg.value != inputAmount) revert RouterErrors.InvalidMsgValue();
        } else {
            if (msg.value != 0) revert RouterErrors.InvalidMsgValue();
            srcToken_.safeTransferFromUniversal(msg.sender, address(clipperExchange), inputAmount, srcToken.getFlag(_PERMIT2_FLAG));
        }
        if (srcToken_ == _ETH) {
            // clipperExchange.sellEthForToken{value: inputAmount}(address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellEthForToken.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)
                mstore(ptr, selector)
                mstore(add(ptr, 0x04), dstToken)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                mstore(add(ptr, 0x84), recipient)
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x124), _INCH_TAG_LENGTH)
                mstore(add(ptr, 0x144), _INCH_TAG)
                if iszero(call(gas(), clipper, inputAmount, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else if (dstToken == _ETH) {
            // clipperExchange.sellTokenForEth(address(srcToken_), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellTokenForEth.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)
                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken_)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                switch iszero(dstToken)
                case 1 {
                    mstore(add(ptr, 0x84), recipient)
                }
                default {
                    mstore(add(ptr, 0x84), address())
                }
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x124), _INCH_TAG_LENGTH)
                mstore(add(ptr, 0x144), _INCH_TAG)
                if iszero(call(gas(), clipper, 0, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else {
            // clipperExchange.swap(address(srcToken_), address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.swap.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)
                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken_)
                mstore(add(ptr, 0x24), dstToken)
                mstore(add(ptr, 0x44), inputAmount)
                mstore(add(ptr, 0x64), outputAmount)
                mstore(add(ptr, 0x84), goodUntil)
                mstore(add(ptr, 0xa4), recipient)
                mstore(add(ptr, 0xc4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xe4), r)
                mstore(add(ptr, 0x104), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x124), 0x140)
                mstore(add(ptr, 0x144), _INCH_TAG_LENGTH)
                mstore(add(ptr, 0x164), _INCH_TAG)
                if iszero(call(gas(), clipper, 0, ptr, 0x169, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
        return outputAmount;
    }
}
// File contracts/interfaces/IAggregationExecutor.sol
/// @title Interface for making arbitrary calls during swap
interface IAggregationExecutor {
    /// @notice propagates information about original msg.sender and executes arbitrary data
    function execute(address msgSender) external payable returns(uint256);  // 0x4b64e492
}
// File contracts/routers/GenericRouter.sol
/**
 * @title GenericRouter
 * @notice Router that allows to use `IAggregationExecutor` for swaps.
 */
contract GenericRouter is Pausable, EthReceiver {
    using UniERC20 for IERC20;
    using SafeERC20 for IERC20;
    error ZeroMinReturn();
    uint256 private constant _PARTIAL_FILL = 1 << 0;
    uint256 private constant _REQUIRES_EXTRA_ETH = 1 << 1;
    uint256 private constant _USE_PERMIT2 = 1 << 2;
    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address payable srcReceiver;
        address payable dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 flags;
    }
    /**
    * @notice Performs a swap, delegating all calls encoded in `data` to `executor`. See tests for usage examples.
    * @dev Router keeps 1 wei of every token on the contract balance for gas optimisations reasons.
    *      This affects first swap of every token by leaving 1 wei on the contract.
    * @param executor Aggregation executor that executes calls described in `data`.
    * @param desc Swap description.
    * @param data Encoded calls that `caller` should execute in between of swaps.
    * @return returnAmount Resulting token amount.
    * @return spentAmount Source token amount.
    */
    function swap(
        IAggregationExecutor executor,
        SwapDescription calldata desc,
        bytes calldata data
    )
        external
        payable
        whenNotPaused()
        returns (
            uint256 returnAmount,
            uint256 spentAmount
        )
    {
        if (desc.minReturnAmount == 0) revert ZeroMinReturn();
        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;
        bool srcETH = srcToken.isETH();
        if (desc.flags & _REQUIRES_EXTRA_ETH != 0) {
            if (msg.value <= (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        } else {
            if (msg.value != (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        }
        if (!srcETH) {
            srcToken.safeTransferFromUniversal(msg.sender, desc.srcReceiver, desc.amount, desc.flags & _USE_PERMIT2 != 0);
        }
        returnAmount = _execute(executor, msg.sender, desc.amount, data);
        spentAmount = desc.amount;
        if (desc.flags & _PARTIAL_FILL != 0) {
            uint256 unspentAmount = srcToken.uniBalanceOf(address(this));
            if (unspentAmount > 1) {
                // we leave 1 wei on the router for gas optimisations reasons
                unchecked { unspentAmount--; }
                spentAmount -= unspentAmount;
                srcToken.uniTransfer(payable(msg.sender), unspentAmount);
            }
            if (returnAmount * desc.amount < desc.minReturnAmount * spentAmount) revert RouterErrors.ReturnAmountIsNotEnough(returnAmount, desc.minReturnAmount * spentAmount / desc.amount);
        } else {
            if (returnAmount < desc.minReturnAmount) revert RouterErrors.ReturnAmountIsNotEnough(returnAmount, desc.minReturnAmount);
        }
        address payable dstReceiver = (desc.dstReceiver == address(0)) ? payable(msg.sender) : desc.dstReceiver;
        dstToken.uniTransfer(dstReceiver, returnAmount);
    }
    function _execute(
        IAggregationExecutor executor,
        address srcTokenOwner,
        uint256 inputAmount,
        bytes calldata data
    ) private returns(uint256 result) {
        bytes4 executeSelector = executor.execute.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, executeSelector)
            mstore(add(ptr, 0x04), srcTokenOwner)
            calldatacopy(add(ptr, 0x24), data.offset, data.length)
            mstore(add(add(ptr, 0x24), data.length), inputAmount)
            if iszero(call(gas(), executor, callvalue(), ptr, add(0x44, data.length), 0, 0x20)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            result := mload(0)
        }
    }
}
// File contracts/interfaces/IUniswapV3Pool.sol
interface IUniswapV3Pool {
    /// @notice Emitted by the pool for any swaps between token0 and token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the output of the swap
    /// @param amount0 The delta of the token0 balance of the pool
    /// @param amount1 The delta of the token1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of price of the pool after the swap
    event Swap(
        address indexed sender,
        address indexed recipient,
        int256 amount0,
        int256 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick
    );
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);
    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);
    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);
    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}
// File contracts/interfaces/IUniswapV3SwapCallback.sol
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}
// File contracts/libs/ProtocolLib.sol
library ProtocolLib {
    using AddressLib for Address;
    enum Protocol {
        UniswapV2,
        UniswapV3,
        Curve
    }
    uint256 private constant _PROTOCOL_OFFSET = 253;
    uint256 private constant _WETH_UNWRAP_FLAG = 1 << 252;
    uint256 private constant _WETH_NOT_WRAP_FLAG = 1 << 251;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 250;
    function protocol(Address self) internal pure returns(Protocol) {
        // there is no need to mask because protocol is stored in the highest 3 bits
        return Protocol((Address.unwrap(self) >> _PROTOCOL_OFFSET));
    }
    function shouldUnwrapWeth(Address self) internal pure returns(bool) {
        return self.getFlag(_WETH_UNWRAP_FLAG);
    }
    function shouldWrapWeth(Address self) internal pure returns(bool) {
        return !self.getFlag(_WETH_NOT_WRAP_FLAG);
    }
    function usePermit2(Address self) internal pure returns(bool) {
        return self.getFlag(_USE_PERMIT2_FLAG);
    }
    function addressForPreTransfer(Address self) internal view returns(address) {
        if (protocol(self) == Protocol.UniswapV2) {
            return self.get();
        }
        return address(this);
    }
}
// File contracts/routers/UnoswapRouter.sol
/**
 * @title UnoswapRouter
 * @notice A router contract for executing token swaps on Unoswap-compatible decentralized exchanges: UniswapV3, UniswapV2, Curve.
 */
contract UnoswapRouter is Pausable, EthReceiver, IUniswapV3SwapCallback {
    using SafeERC20 for IERC20;
    using SafeERC20 for IWETH;
    using AddressLib for Address;
    using ProtocolLib for Address;
    error BadPool();
    error BadCurveSwapSelector();
    /// @dev WETH address is network-specific and needs to be changed before deployment.
    /// It can not be moved to immutable as immutables are not supported in assembly
    address private constant _WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    address private constant _ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    address private constant _PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
    bytes4 private constant _WETH_DEPOSIT_CALL_SELECTOR = 0xd0e30db0;
    bytes4 private constant _WETH_WITHDRAW_CALL_SELECTOR = 0x2e1a7d4d;
    uint256 private constant _ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _SELECTORS = (
        (uint256(uint32(IUniswapV3Pool.token0.selector)) << 224) |
        (uint256(uint32(IUniswapV3Pool.token1.selector)) << 192) |
        (uint256(uint32(IUniswapV3Pool.fee.selector)) << 160) |
        (uint256(uint32(IERC20.transfer.selector)) << 128) |
        (uint256(uint32(IERC20.transferFrom.selector)) << 96) |
        (uint256(uint32(IPermit2.transferFrom.selector)) << 64)
    );
    uint256 private constant _TOKEN0_SELECTOR_OFFSET = 0;
    uint256 private constant _TOKEN1_SELECTOR_OFFSET = 4;
    uint256 private constant _FEE_SELECTOR_OFFSET = 8;
    uint256 private constant _TRANSFER_SELECTOR_OFFSET = 12;
    uint256 private constant _TRANSFER_FROM_SELECTOR_OFFSET = 16;
    uint256 private constant _PERMIT2_TRANSFER_FROM_SELECTOR_OFFSET = 20;
    bytes32 private constant _POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
    bytes32 private constant _FF_FACTORY = 0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000;
    // =====================================================================
    //                          Methods with 1 pool
    // =====================================================================
    /**
    * @notice Swaps `amount` of the specified `token` for another token using an Unoswap-compatible exchange's pool,
    *         with a minimum return specified by `minReturn`.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function unoswap(Address token, uint256 amount, uint256 minReturn, Address dex) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo(msg.sender, msg.sender, token, amount, minReturn, dex);
    }
    /**
    * @notice Swaps `amount` of the specified `token` for another token using an Unoswap-compatible exchange's pool,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    * @param to The address to receive the swapped tokens.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function unoswapTo(Address to, Address token, uint256 amount, uint256 minReturn, Address dex) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo(msg.sender, to.get(), token, amount, minReturn, dex);
    }
    /**
    * @notice Swaps ETH for another token using an Unoswap-compatible exchange's pool, with a minimum return specified by `minReturn`.
    *         The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function ethUnoswap(uint256 minReturn, Address dex) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo(address(this), msg.sender, Address.wrap(uint160(_WETH)), msg.value, minReturn, dex);
    }
    /**
    * @notice Swaps ETH for another token using an Unoswap-compatible exchange's pool, sending the resulting tokens to the `to` address,
    *         with a minimum return specified by `minReturn`. The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param to The address to receive the swapped tokens.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function ethUnoswapTo(Address to, uint256 minReturn, Address dex) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo(address(this), to.get(), Address.wrap(uint160(_WETH)), msg.value, minReturn, dex);
    }
    function _unoswapTo(address from, address to, Address token, uint256 amount, uint256 minReturn, Address dex) private whenNotPaused() returns(uint256 returnAmount) {
        if (dex.shouldUnwrapWeth()) {
            returnAmount = _unoswap(from, address(this), token, amount, minReturn, dex);
            IWETH(_WETH).safeWithdrawTo(returnAmount, to);
        } else {
            returnAmount = _unoswap(from, to, token, amount, minReturn, dex);
        }
    }
    // =====================================================================
    //                    Methods with 2 sequential pools
    // =====================================================================
    /**
    * @notice Swaps `amount` of the specified `token` for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         with a minimum return specified by `minReturn`.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function unoswap2(Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo2(msg.sender, msg.sender, token, amount, minReturn, dex, dex2);
    }
    /**
    * @notice Swaps `amount` of the specified `token` for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    * @param to The address to receive the swapped tokens.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function unoswapTo2(Address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo2(msg.sender, to.get(), token, amount, minReturn, dex, dex2);
    }
    /**
    * @notice Swaps ETH for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         with a minimum return specified by `minReturn`. The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function ethUnoswap2(uint256 minReturn, Address dex, Address dex2) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo2(address(this), msg.sender, Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2);
    }
    /**
    * @notice Swaps ETH for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    *         The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param to The address to receive the swapped tokens.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function ethUnoswapTo2(Address to, uint256 minReturn, Address dex, Address dex2) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo2(address(this), to.get(), Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2);
    }
    function _unoswapTo2(address from, address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2) private whenNotPaused() returns(uint256 returnAmount) {
        address pool2 = dex2.addressForPreTransfer();
        address target = dex2.shouldUnwrapWeth() ? address(this) : to;
        returnAmount = _unoswap(from, pool2, token, amount, 0, dex);
        returnAmount = _unoswap(pool2, target, Address.wrap(0), returnAmount, minReturn, dex2);
        if (dex2.shouldUnwrapWeth()) {
            IWETH(_WETH).safeWithdrawTo(returnAmount, to);
        }
    }
    // =====================================================================
    //                    Methods with 3 sequential pools
    // =====================================================================
    /**
    * @notice Swaps `amount` of the specified `token` for another token using three Unoswap-compatible exchange pools
    *         (`dex`, `dex2`, and `dex3`) sequentially, with a minimum return specified by `minReturn`.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function unoswap3(Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2, Address dex3) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo3(msg.sender, msg.sender, token, amount, minReturn, dex, dex2, dex3);
    }
    /**
    * @notice Swaps `amount` of the specified `token` for another token using three Unoswap-compatible exchange pools
    *         (`dex`, `dex2`, and `dex3`) sequentially, sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    * @param to The address to receive the swapped tokens.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function unoswapTo3(Address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2, Address dex3) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo3(msg.sender, to.get(), token, amount, minReturn, dex, dex2, dex3);
    }
    /**
    * @notice Swaps ETH for another token using three Unoswap-compatible exchange pools (`dex`, `dex2`, and `dex3`) sequentially,
    *         with a minimum return specified by `minReturn`. The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function ethUnoswap3(uint256 minReturn, Address dex, Address dex2, Address dex3) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo3(address(this), msg.sender, Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2, dex3);
    }
    /**
    * @notice Swaps ETH for another token using three Unoswap-compatible exchange pools (`dex`, `dex2`, and `dex3`) sequentially,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    *         The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param to The address to receive the swapped tokens.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function ethUnoswapTo3(Address to, uint256 minReturn, Address dex, Address dex2, Address dex3) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo3(address(this), to.get(), Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2, dex3);
    }
    function _unoswapTo3(address from, address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2, Address dex3) private whenNotPaused() returns(uint256 returnAmount) {
        address pool2 = dex2.addressForPreTransfer();
        address pool3 = dex3.addressForPreTransfer();
        address target = dex3.shouldUnwrapWeth() ? address(this) : to;
        returnAmount = _unoswap(from, pool2, token, amount, 0, dex);
        returnAmount = _unoswap(pool2, pool3, Address.wrap(0), returnAmount, 0, dex2);
        returnAmount = _unoswap(pool3, target, Address.wrap(0), returnAmount, minReturn, dex3);
        if (dex3.shouldUnwrapWeth()) {
            IWETH(_WETH).safeWithdrawTo(returnAmount, to);
        }
    }
    function _unoswap(
        address spender,
        address recipient,
        Address token,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 returnAmount) {
        ProtocolLib.Protocol protocol = dex.protocol();
        if (protocol == ProtocolLib.Protocol.UniswapV3) {
            returnAmount = _unoswapV3(spender, recipient, amount, minReturn, dex);
        } else if (protocol == ProtocolLib.Protocol.UniswapV2) {
            if (spender == address(this)) {
                IERC20(token.get()).safeTransfer(dex.get(), amount);
            } else if (spender == msg.sender) {
                IERC20(token.get()).safeTransferFromUniversal(msg.sender, dex.get(), amount, dex.usePermit2());
            }
            returnAmount = _unoswapV2(recipient, amount, minReturn, dex);
        } else if (protocol == ProtocolLib.Protocol.Curve) {
            if (spender == msg.sender && msg.value == 0) {
                IERC20(token.get()).safeTransferFromUniversal(msg.sender, address(this), amount, dex.usePermit2());
            }
            returnAmount = _curfe(recipient, amount, minReturn, dex);
        }
    }
    uint256 private constant _UNISWAP_V2_ZERO_FOR_ONE_OFFSET = 247;
    uint256 private constant _UNISWAP_V2_ZERO_FOR_ONE_MASK = 0x01;
    uint256 private constant _UNISWAP_V2_NUMERATOR_OFFSET = 160;
    uint256 private constant _UNISWAP_V2_NUMERATOR_MASK = 0xffffffff;
    bytes4 private constant _UNISWAP_V2_PAIR_RESERVES_CALL_SELECTOR = 0x0902f1ac;
    bytes4 private constant _UNISWAP_V2_PAIR_SWAP_CALL_SELECTOR = 0x022c0d9f;
    uint256 private constant _UNISWAP_V2_DENOMINATOR = 1e9;
    uint256 private constant _UNISWAP_V2_DEFAULT_NUMERATOR = 997_000_000;
    error ReservesCallFailed();
    function _unoswapV2(
        address recipient,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 ret) {
        bytes4 returnAmountNotEnoughException = RouterErrors.ReturnAmountIsNotEnough.selector;
        bytes4 reservesCallFailedException = ReservesCallFailed.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let pool := and(dex, _ADDRESS_MASK)
            let zeroForOne := and(shr(_UNISWAP_V2_ZERO_FOR_ONE_OFFSET, dex), _UNISWAP_V2_ZERO_FOR_ONE_MASK)
            let numerator := and(shr(_UNISWAP_V2_NUMERATOR_OFFSET, dex), _UNISWAP_V2_NUMERATOR_MASK)
            if iszero(numerator) {
                numerator := _UNISWAP_V2_DEFAULT_NUMERATOR
            }
            let ptr := mload(0x40)
            mstore(0, _UNISWAP_V2_PAIR_RESERVES_CALL_SELECTOR)
            if iszero(staticcall(gas(), pool, 0, 4, 0, 0x40)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            if sub(returndatasize(), 0x60) {
                mstore(0, reservesCallFailedException)
                revert(0, 4)
            }
            let reserve0 := mload(mul(0x20, iszero(zeroForOne)))
            let reserve1 := mload(mul(0x20, zeroForOne))
            // this will not overflow as reserve0, reserve1 and ret fit to 112 bit and numerator and _DENOMINATOR fit to 32 bit
            ret := mul(amount, numerator)
            ret := div(mul(ret, reserve1), add(ret, mul(reserve0, _UNISWAP_V2_DENOMINATOR)))
            if lt(ret, minReturn) {
                mstore(ptr, returnAmountNotEnoughException)
                mstore(add(ptr, 0x04), ret)
                mstore(add(ptr, 0x24), minReturn)
                revert(ptr, 0x44)
            }
            mstore(ptr, _UNISWAP_V2_PAIR_SWAP_CALL_SELECTOR)
            mstore(add(ptr, 0x04), mul(ret, iszero(zeroForOne)))
            mstore(add(ptr, 0x24), mul(ret, zeroForOne))
            mstore(add(ptr, 0x44), recipient)
            mstore(add(ptr, 0x64), 0x80)
            mstore(add(ptr, 0x84), 0)
            if iszero(call(gas(), pool, 0, ptr, 0xa4, 0, 0)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 private constant _UNISWAP_V3_MIN_SQRT_RATIO = 4295128739 + 1;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 private constant _UNISWAP_V3_MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342 - 1;
    uint256 private constant _UNISWAP_V3_ZERO_FOR_ONE_OFFSET = 247;
    uint256 private constant _UNISWAP_V3_ZERO_FOR_ONE_MASK = 0x01;
    function _unoswapV3(
        address spender,
        address recipient,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 ret) {
        bytes4 swapSelector = IUniswapV3Pool.swap.selector;
        bool usePermit2 = dex.usePermit2();
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let pool := and(dex, _ADDRESS_MASK)
            let zeroForOne := and(shr(_UNISWAP_V3_ZERO_FOR_ONE_OFFSET, dex), _UNISWAP_V3_ZERO_FOR_ONE_MASK)
            let ptr := mload(0x40)
            mstore(ptr, swapSelector)
            mstore(add(ptr, 0x04), recipient)
            mstore(add(ptr, 0x24), zeroForOne)
            mstore(add(ptr, 0x44), amount)
            switch zeroForOne
            case 1 {
                mstore(add(ptr, 0x64), _UNISWAP_V3_MIN_SQRT_RATIO)
            }
            case 0 {
                mstore(add(ptr, 0x64), _UNISWAP_V3_MAX_SQRT_RATIO)
            }
            mstore(add(ptr, 0x84), 0xa0)
            mstore(add(ptr, 0xa4), 0x40)
            mstore(add(ptr, 0xc4), spender)
            mstore(add(ptr, 0xe4), usePermit2)
            if iszero(call(gas(), pool, 0, ptr, 0x0104, 0, 0x40)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            ret := sub(0, mload(mul(0x20, zeroForOne)))
        }
        if (ret < minReturn) revert RouterErrors.ReturnAmountIsNotEnough(ret, minReturn);
    }
    uint256 private constant _CURVE_SWAP_SELECTOR_IDX_OFFSET = 184;
    uint256 private constant _CURVE_SWAP_SELECTOR_IDX_MASK = 0xff;
    uint256 private constant _CURVE_FROM_COINS_SELECTOR_OFFSET = 192;
    uint256 private constant _CURVE_FROM_COINS_SELECTOR_MASK = 0xff;
    uint256 private constant _CURVE_FROM_COINS_ARG_OFFSET = 200;
    uint256 private constant _CURVE_FROM_COINS_ARG_MASK = 0xff;
    uint256 private constant _CURVE_TO_COINS_SELECTOR_OFFSET = 208;
    uint256 private constant _CURVE_TO_COINS_SELECTOR_MASK = 0xff;
    uint256 private constant _CURVE_TO_COINS_ARG_OFFSET = 216;
    uint256 private constant _CURVE_TO_COINS_ARG_MASK = 0xff;
    uint256 private constant _CURVE_FROM_TOKEN_OFFSET = 224;
    uint256 private constant _CURVE_FROM_TOKEN_MASK = 0xff;
    uint256 private constant _CURVE_TO_TOKEN_OFFSET = 232;
    uint256 private constant _CURVE_TO_TOKEN_MASK = 0xff;
    uint256 private constant _CURVE_INPUT_WETH_DEPOSIT_OFFSET = 240;
    uint256 private constant _CURVE_INPUT_WETH_WITHDRAW_OFFSET = 241;
    uint256 private constant _CURVE_SWAP_USE_ETH_OFFSET = 242;
    uint256 private constant _CURVE_SWAP_HAS_ARG_USE_ETH_OFFSET = 243;
    uint256 private constant _CURVE_SWAP_HAS_ARG_DESTINATION_OFFSET = 244;
    uint256 private constant _CURVE_OUTPUT_WETH_DEPOSIT_OFFSET = 245;
    uint256 private constant _CURVE_OUTPUT_WETH_WITHDRAW_OFFSET = 246;
    uint256 private constant _CURVE_SWAP_USE_SECOND_OUTPUT_OFFSET = 247;
    uint256 private constant _CURVE_SWAP_HAS_ARG_CALLBACK_OFFSET = 249;
    // Curve Pool function selectors for different `coins` methods. For details, see contracts/interfaces/ICurvePool.sol
    bytes32 private constant _CURVE_COINS_SELECTORS = 0x87cb4f5723746eb8c6610657b739953eb9947eb0000000000000000000000000;
    // Curve Pool function selectors for different `exchange` methods. For details, see contracts/interfaces/ICurvePool.sol
    bytes32 private constant _CURVE_SWAP_SELECTORS_1 = 0x3df02124a6417ed6ddc1f59d44ee1986ed4ae2b8bf5ed0562f7865a837cab679;
    bytes32 private constant _CURVE_SWAP_SELECTORS_2 = 0x2a064e3c5b41b90865b2489ba64833a0e2ad025a394747c5cb7558f1ce7d6503;
    bytes32 private constant _CURVE_SWAP_SELECTORS_3 = 0xd2e2833add96994f000000000000000000000000000000000000000000000000;
    uint256 private constant _CURVE_MAX_SELECTOR_INDEX = 17;
    function _curfe(
        address recipient,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 ret) {
        bytes4 callbackSelector = this.curveSwapCallback.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            function callReturnSize(status) -> rds {
                if iszero(status) {
                    reRevert()
                }
                rds := returndatasize()
            }
            function tokenBalanceOf(tokenAddress, accountAddress) -> tokenBalance {
                mstore(0, 0x70a0823100000000000000000000000000000000000000000000000000000000)
                mstore(4, accountAddress)
                if iszero(callReturnSize(staticcall(gas(), tokenAddress, 0, 0x24, 0, 0x20))) {
                    revert(0, 0)
                }
                tokenBalance := mload(0)
            }
            function asmApprove(token, to, value, mem) {
                let selector := 0x095ea7b300000000000000000000000000000000000000000000000000000000 // IERC20.approve.selector
                let exception := 0x3e3f8f7300000000000000000000000000000000000000000000000000000000 // error ApproveFailed()
                if iszero(_asmCall(token, selector, to, value, mem)) {
                    if iszero(_asmCall(token, selector, to, 0, mem)) {
                        mstore(mem, exception)
                        revert(mem, 4)
                    }
                    if iszero(_asmCall(token, selector, to, value, mem)) {
                        mstore(mem, exception)
                        revert(mem, 4)
                    }
                }
            }
            function _asmCall(token, selector, to, value, mem) -> done {
                mstore(mem, selector)
                mstore(add(mem, 0x04), to)
                mstore(add(mem, 0x24), value)
                let success := call(gas(), token, 0, mem, 0x44, 0x0, 0x20)
                done := and(
                    success,
                    or(
                        iszero(returndatasize()),
                        and(gt(returndatasize(), 31), eq(mload(0), 1))
                    )
                )
            }
            function curveCoins(pool, selectorOffset, index) -> coin {
                mstore(0, _CURVE_COINS_SELECTORS)
                mstore(add(selectorOffset, 4), index)
                if iszero(staticcall(gas(), pool, selectorOffset, 0x24, 0, 0x20)) {
                    reRevert()
                }
                coin := mload(0)
            }
            let pool := and(dex, _ADDRESS_MASK)
            let useEth := and(shr(_CURVE_SWAP_USE_ETH_OFFSET, dex), 0x01)
            let hasCallback := and(shr(_CURVE_SWAP_HAS_ARG_CALLBACK_OFFSET, dex), 0x01)
            if and(shr(_CURVE_INPUT_WETH_DEPOSIT_OFFSET, dex), 0x01) {
                // Deposit ETH to WETH
                mstore(0, _WETH_DEPOSIT_CALL_SELECTOR)
                if iszero(call(gas(), _WETH, amount, 0, 4, 0, 0)) {
                    reRevert()
                }
            }
            if and(shr(_CURVE_INPUT_WETH_WITHDRAW_OFFSET, dex), 0x01) {
                // Withdraw ETH from WETH
                mstore(0, _WETH_WITHDRAW_CALL_SELECTOR)
                mstore(4, amount)
                if iszero(call(gas(), _WETH, 0, 0, 0x24, 0, 0)) {
                    reRevert()
                }
            }
            let toToken
            {  // Stack too deep
                let toSelectorOffset := and(shr(_CURVE_TO_COINS_SELECTOR_OFFSET, dex), _CURVE_TO_COINS_SELECTOR_MASK)
                let toTokenIndex := and(shr(_CURVE_TO_COINS_ARG_OFFSET, dex), _CURVE_TO_COINS_ARG_MASK)
                toToken := curveCoins(pool, toSelectorOffset, toTokenIndex)
            }
            let toTokenIsEth := or(eq(toToken, _ETH), eq(toToken, _WETH))
            // use approve when the callback is not used AND (raw ether is not used at all OR ether is used on the output)
            if and(iszero(hasCallback), or(iszero(useEth), toTokenIsEth)) {
                let fromSelectorOffset := and(shr(_CURVE_FROM_COINS_SELECTOR_OFFSET, dex), _CURVE_FROM_COINS_SELECTOR_MASK)
                let fromTokenIndex := and(shr(_CURVE_FROM_COINS_ARG_OFFSET, dex), _CURVE_FROM_COINS_ARG_MASK)
                let fromToken := curveCoins(pool, fromSelectorOffset, fromTokenIndex)
                if eq(fromToken, _ETH) {
                    fromToken := _WETH
                }
                asmApprove(fromToken, pool, amount, mload(0x40))
            }
            // Swap
            let ptr := mload(0x40)
            {  // stack too deep
                let selectorIndex := and(shr(_CURVE_SWAP_SELECTOR_IDX_OFFSET, dex), _CURVE_SWAP_SELECTOR_IDX_MASK)
                if gt(selectorIndex, _CURVE_MAX_SELECTOR_INDEX) {
                    mstore(0, 0xa231cb8200000000000000000000000000000000000000000000000000000000)  // BadCurveSwapSelector()
                    revert(0, 4)
                }
                mstore(ptr, _CURVE_SWAP_SELECTORS_1)
                mstore(add(ptr, 0x20), _CURVE_SWAP_SELECTORS_2)
                mstore(add(ptr, 0x40), _CURVE_SWAP_SELECTORS_3)
                ptr := add(ptr, mul(selectorIndex, 4))
            }
            mstore(add(ptr, 0x04), and(shr(_CURVE_FROM_TOKEN_OFFSET, dex), _CURVE_FROM_TOKEN_MASK))
            mstore(add(ptr, 0x24), and(shr(_CURVE_TO_TOKEN_OFFSET, dex), _CURVE_TO_TOKEN_MASK))
            mstore(add(ptr, 0x44), amount)
            mstore(add(ptr, 0x64), minReturn)
            let offset := 0x84
            if and(shr(_CURVE_SWAP_HAS_ARG_USE_ETH_OFFSET, dex), 0x01) {
                mstore(add(ptr, offset), useEth)
                offset := add(offset, 0x20)
            }
            switch hasCallback
            case 1 {
                mstore(add(ptr, offset), address())
                mstore(add(ptr, add(offset, 0x20)), recipient)
                mstore(add(ptr, add(offset, 0x40)), callbackSelector)
                offset := add(offset, 0x60)
            }
            default {
                if and(shr(_CURVE_SWAP_HAS_ARG_DESTINATION_OFFSET, dex), 0x01) {
                    mstore(add(ptr, offset), recipient)
                    offset := add(offset, 0x20)
                }
            }
            // swap call
            // value is passed when useEth is set but toToken is not ETH
            switch callReturnSize(call(gas(), pool, mul(mul(amount, useEth), iszero(toTokenIsEth)), ptr, offset, 0, 0x40))
            case 0 {
                // we expect that curve pools that do not return any value also do not have the recipient argument
                switch and(useEth, toTokenIsEth)
                case 1 {
                    ret := balance(address())
                }
                default {
                    ret := tokenBalanceOf(toToken, address())
                }
                ret := sub(ret, 1)  // keep 1 wei
            }
            default {
                ret := mload(mul(0x20, and(shr(_CURVE_SWAP_USE_SECOND_OUTPUT_OFFSET, dex), 0x01)))
            }
            if iszero(and(shr(_CURVE_SWAP_HAS_ARG_DESTINATION_OFFSET, dex), 0x01)) {
                if and(shr(_CURVE_OUTPUT_WETH_DEPOSIT_OFFSET, dex), 0x01) {
                    // Deposit ETH to WETH
                    mstore(0, _WETH_DEPOSIT_CALL_SELECTOR)
                    if iszero(call(gas(), _WETH, ret, 0, 4, 0, 0)) {
                        reRevert()
                    }
                }
                if and(shr(_CURVE_OUTPUT_WETH_WITHDRAW_OFFSET, dex), 0x01) {
                    // Withdraw ETH from WETH
                    mstore(0, _WETH_WITHDRAW_CALL_SELECTOR)
                    mstore(4, ret)
                    if iszero(call(gas(), _WETH, 0, 0, 0x24, 0, 0)) {
                        reRevert()
                    }
                }
                // Post transfer toToken if needed
                if xor(recipient, address()) {
                    switch and(useEth, toTokenIsEth)
                    case 1 {
                        if iszero(call(gas(), recipient, ret, 0, 0, 0, 0)) {
                            reRevert()
                        }
                    }
                    default {
                        if eq(toToken, _ETH) {
                            toToken := _WETH
                        }
                        // toToken.transfer(recipient, ret)
                        if iszero(_asmCall(toToken, 0xa9059cbb00000000000000000000000000000000000000000000000000000000, recipient, ret, ptr)) {
                            mstore(ptr, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // error ERC20TransferFailed()
                            revert(ptr, 4)
                        }
                    }
                }
            }
        }
        if (ret < minReturn) revert RouterErrors.ReturnAmountIsNotEnough(ret, minReturn);
    }
    /**
     * @notice Called by Curve pool during the swap operation initiated by `_curfe`.
     * @dev This function can be called by anyone assuming there are no tokens
     * stored on this contract between transactions.
     * @param inCoin Address of the token to be exchanged.
     * @param dx Amount of tokens to be exchanged.
     */
    function curveSwapCallback(
        address /* sender */,
        address /* receiver */,
        address inCoin,
        uint256 dx,
        uint256 /* dy */
    ) external {
        IERC20(inCoin).safeTransfer(msg.sender, dx);
    }
    /**
     * @notice See {IUniswapV3SwapCallback-uniswapV3SwapCallback}
     *         Called by UniswapV3 pool during the swap operation initiated by `_unoswapV3`.
     *         This callback function ensures the proper transfer of tokens based on the swap's
     *         configuration. It handles the transfer of tokens by either directly transferring
     *         the tokens from the payer to the recipient, or by using a secondary permit contract
     *         to transfer the tokens if required by the pool. It verifies the correct pool is
     *         calling the function and uses inline assembly for efficient execution and to access
     *         low-level EVM features.
     */
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata /* data */
    ) external override {
        uint256 selectors = _SELECTORS;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            function safeERC20(target, value, mem, memLength, outLen) {
                let status := call(gas(), target, value, mem, memLength, 0, outLen)
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()),                       // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1))  // true in return data
                )
                if iszero(success) {
                    mstore(0, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // ERC20TransferFailed()
                    revert(0, 4)
                }
            }
            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 0x15)  // 0x15 = _FF_FACTORY size
            mstore(emptyPtr, selectors)
            let amount
            let token
            switch sgt(amount0Delta, 0)
            case 1 {
                if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN0_SELECTOR_OFFSET), 0x4, resultPtr, 0x20)) {
                    reRevert()
                }
                token := mload(resultPtr)
                amount := amount0Delta
            }
            default {
                if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN1_SELECTOR_OFFSET), 0x4, add(resultPtr, 0x20), 0x20)) {
                    reRevert()
                }
                token := mload(add(resultPtr, 0x20))
                amount := amount1Delta
            }
            let payer := calldataload(0x84)
            let usePermit2 := calldataload(0xa4)
            switch eq(payer, address())
            case 1 {
                // IERC20(token.get()).safeTransfer(msg.sender,amount)
                mstore(add(emptyPtr, add(_TRANSFER_SELECTOR_OFFSET, 0x04)), caller())
                mstore(add(emptyPtr, add(_TRANSFER_SELECTOR_OFFSET, 0x24)), amount)
                safeERC20(token, 0, add(emptyPtr, _TRANSFER_SELECTOR_OFFSET), 0x44, 0x20)
            }
            default {
                switch sgt(amount0Delta, 0)
                case 1 {
                    if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN1_SELECTOR_OFFSET), 0x4, add(resultPtr, 0x20), 0x20)) {
                        reRevert()
                    }
                }
                default {
                    if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN0_SELECTOR_OFFSET), 0x4, resultPtr, 0x20)) {
                        reRevert()
                    }
                }
                if iszero(staticcall(gas(), caller(), add(emptyPtr, _FEE_SELECTOR_OFFSET), 0x4, add(resultPtr, 0x40), 0x20)) {
                    reRevert()
                }
                mstore(emptyPtr, _FF_FACTORY)
                mstore(resultPtr, keccak256(resultPtr, 0x60)) // Compute the inner hash in-place
                mstore(add(resultPtr, 0x20), _POOL_INIT_CODE_HASH)
                let pool := and(keccak256(emptyPtr, 0x55), _ADDRESS_MASK)
                if xor(pool, caller()) {
                    mstore(0, 0xb2c0272200000000000000000000000000000000000000000000000000000000)  // BadPool()
                    revert(0, 4)
                }
                switch usePermit2
                case 1 {
                    // permit2.transferFrom(payer, msg.sender, amount, token);
                    mstore(emptyPtr, selectors)
                    emptyPtr := add(emptyPtr, _PERMIT2_TRANSFER_FROM_SELECTOR_OFFSET)
                    mstore(add(emptyPtr, 0x04), payer)
                    mstore(add(emptyPtr, 0x24), caller())
                    mstore(add(emptyPtr, 0x44), amount)
                    mstore(add(emptyPtr, 0x64), token)
                    let success := call(gas(), _PERMIT2, 0, emptyPtr, 0x84, 0, 0)
                    if success {
                        success := gt(extcodesize(_PERMIT2), 0)
                    }
                    if iszero(success) {
                        mstore(0, 0xc3f9d33200000000000000000000000000000000000000000000000000000000)  // Permit2TransferFromFailed()
                        revert(0, 4)
                    }
                }
                case 0 {
                    // IERC20(token.get()).safeTransferFrom(payer, msg.sender, amount);
                    mstore(emptyPtr, selectors)
                    emptyPtr := add(emptyPtr, _TRANSFER_FROM_SELECTOR_OFFSET)
                    mstore(add(emptyPtr, 0x04), payer)
                    mstore(add(emptyPtr, 0x24), caller())
                    mstore(add(emptyPtr, 0x44), amount)
                    safeERC20(token, 0, emptyPtr, 0x64, 0x20)
                }
            }
        }
    }
}
// File contracts/AggregationRouterV6.sol
/// @notice Main contract incorporates a number of routers to perform swaps and limit orders protocol to fill limit orders
contract AggregationRouterV6 is EIP712("1inch Aggregation Router", "6"), Ownable, Pausable,
    ClipperRouter, GenericRouter, UnoswapRouter, PermitAndCall, OrderMixin
{
    using UniERC20 for IERC20;
    error ZeroAddress();
    /**
     * @dev Sets the wrapped eth token and clipper exhange interface
     * Both values are immutable: they can only be set once during
     * construction.
     */
    constructor(IWETH weth)
        ClipperRouter(weth)
        OrderMixin(weth)
        Ownable(msg.sender)
    {
        if (address(weth) == address(0)) revert ZeroAddress();
    }
    /**
     * @notice Retrieves funds accidently sent directly to the contract address
     * @param token ERC20 token to retrieve
     * @param amount amount to retrieve
     */
    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(payable(msg.sender), amount);
    }
    /**
     * @notice Pauses all the trading functionality in the contract.
     */
    function pause() external onlyOwner {
        _pause();
    }
    /**
     * @notice Unpauses all the trading functionality in the contract.
     */
    function unpause() external onlyOwner {
        _unpause();
    }
    function _receive() internal override(EthReceiver, OnlyWethReceiver) {
        EthReceiver._receive();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IOrderMixin.sol";
interface IAmountGetter {
    /**
     * @notice View method that gets called to determine the actual making amount
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function getMakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external view returns (uint256);
    /**
     * @notice View method that gets called to determine the actual making amount
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function getTakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@1inch/solidity-utils/contracts/libraries/AddressLib.sol";
import "../libraries/MakerTraitsLib.sol";
import "../libraries/TakerTraitsLib.sol";
interface IOrderMixin {
    struct Order {
        uint256 salt;
        Address maker;
        Address receiver;
        Address makerAsset;
        Address takerAsset;
        uint256 makingAmount;
        uint256 takingAmount;
        MakerTraits makerTraits;
    }
    error InvalidatedOrder();
    error TakingAmountExceeded();
    error PrivateOrder();
    error BadSignature();
    error OrderExpired();
    error WrongSeriesNonce();
    error SwapWithZeroAmount();
    error PartialFillNotAllowed();
    error OrderIsNotSuitableForMassInvalidation();
    error EpochManagerAndBitInvalidatorsAreIncompatible();
    error ReentrancyDetected();
    error PredicateIsNotTrue();
    error TakingAmountTooHigh();
    error MakingAmountTooLow();
    error TransferFromMakerToTakerFailed();
    error TransferFromTakerToMakerFailed();
    error MismatchArraysLengths();
    error InvalidPermit2Transfer();
    error SimulationResults(bool success, bytes res);
    /**
     * @notice Emitted when order gets filled
     * @param orderHash Hash of the order
     * @param remainingAmount Amount of the maker asset that remains to be filled
     */
    event OrderFilled(
        bytes32 orderHash,
        uint256 remainingAmount
    );
    /**
     * @notice Emitted when order without `useBitInvalidator` gets cancelled
     * @param orderHash Hash of the order
     */
    event OrderCancelled(
        bytes32 orderHash
    );
    /**
     * @notice Emitted when order with `useBitInvalidator` gets cancelled
     * @param maker Maker address
     * @param slotIndex Slot index that was updated
     * @param slotValue New slot value
     */
    event BitInvalidatorUpdated(
        address indexed maker,
        uint256 slotIndex,
        uint256 slotValue
    );
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param maker Maker address
     * @param slot Slot number to return bitmask for
     * @return result Each bit represents whether corresponding was already invalidated
     */
    function bitInvalidatorForOrder(address maker, uint256 slot) external view returns(uint256 result);
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param orderHash Hash of the order
     * @return remaining Remaining amount of the order
     */
    function remainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 remaining);
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param orderHash Hash of the order
     * @return remainingRaw Inverse of the remaining amount of the order if order was filled at least once, otherwise 0
     */
    function rawRemainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 remainingRaw);
    /**
     * @notice Cancels order's quote
     * @param makerTraits Order makerTraits
     * @param orderHash Hash of the order to cancel
     */
    function cancelOrder(MakerTraits makerTraits, bytes32 orderHash) external;
    /**
     * @notice Cancels orders' quotes
     * @param makerTraits Orders makerTraits
     * @param orderHashes Hashes of the orders to cancel
     */
    function cancelOrders(MakerTraits[] calldata makerTraits, bytes32[] calldata orderHashes) external;
    /**
     * @notice Cancels all quotes of the maker (works for bit-invalidating orders only)
     * @param makerTraits Order makerTraits
     * @param additionalMask Additional bitmask to invalidate orders
     */
    function bitsInvalidateForOrder(MakerTraits makerTraits, uint256 additionalMask) external;
    /**
     * @notice Returns order hash, hashed with limit order protocol contract EIP712
     * @param order Order
     * @return orderHash Hash of the order
     */
    function hashOrder(IOrderMixin.Order calldata order) external view returns(bytes32 orderHash);
    /**
     * @notice Delegates execution to custom implementation. Could be used to validate if `transferFrom` works properly
     * @dev The function always reverts and returns the simulation results in revert data.
     * @param target Addresses that will be delegated
     * @param data Data that will be passed to delegatee
     */
    function simulate(address target, bytes calldata data) external;
    /**
     * @notice Fills order's quote, fully or partially (whichever is possible).
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrder(
        Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits
    ) external payable returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillOrder` but allows to specify arguments that are used by the taker.
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @param args Arguments that are used by the taker (target, extension, interaction, permit)
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderArgs(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external payable returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillOrder` but uses contract-based signatures.
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillContractOrder(
        Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits
    ) external returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillContractOrder` but allows to specify arguments that are used by the taker.
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @param args Arguments that are used by the taker (target, extension, interaction, permit)
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillContractOrderArgs(
        Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IOrderMixin.sol";
interface IPostInteraction {
    /**
     * @notice Callback method that gets called after all fund transfers
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IOrderMixin.sol";
interface IPreInteraction {
    /**
     * @notice Callback method that gets called before any funds transfers
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function preInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
type MakerTraits is uint256;
/**
 * @title MakerTraitsLib
 * @notice A library to manage and check MakerTraits, which are used to encode the maker's preferences for an order in a single uint256.
 * @dev
 * The MakerTraits type is a uint256 and different parts of the number are used to encode different traits.
 * High bits are used for flags
 * 255 bit `NO_PARTIAL_FILLS_FLAG`          - if set, the order does not allow partial fills
 * 254 bit `ALLOW_MULTIPLE_FILLS_FLAG`      - if set, the order permits multiple fills
 * 253 bit                                  - unused
 * 252 bit `PRE_INTERACTION_CALL_FLAG`      - if set, the order requires pre-interaction call
 * 251 bit `POST_INTERACTION_CALL_FLAG`     - if set, the order requires post-interaction call
 * 250 bit `NEED_CHECK_EPOCH_MANAGER_FLAG`  - if set, the order requires to check the epoch manager
 * 249 bit `HAS_EXTENSION_FLAG`             - if set, the order has extension(s)
 * 248 bit `USE_PERMIT2_FLAG`               - if set, the order uses permit2
 * 247 bit `UNWRAP_WETH_FLAG`               - if set, the order requires to unwrap WETH
 * Low 200 bits are used for allowed sender, expiration, nonceOrEpoch, and series
 * uint80 last 10 bytes of allowed sender address (0 if any)
 * uint40 expiration timestamp (0 if none)
 * uint40 nonce or epoch
 * uint40 series
 */
library MakerTraitsLib {
    // Low 200 bits are used for allowed sender, expiration, nonceOrEpoch, and series
    uint256 private constant _ALLOWED_SENDER_MASK = type(uint80).max;
    uint256 private constant _EXPIRATION_OFFSET = 80;
    uint256 private constant _EXPIRATION_MASK = type(uint40).max;
    uint256 private constant _NONCE_OR_EPOCH_OFFSET = 120;
    uint256 private constant _NONCE_OR_EPOCH_MASK = type(uint40).max;
    uint256 private constant _SERIES_OFFSET = 160;
    uint256 private constant _SERIES_MASK = type(uint40).max;
    uint256 private constant _NO_PARTIAL_FILLS_FLAG = 1 << 255;
    uint256 private constant _ALLOW_MULTIPLE_FILLS_FLAG = 1 << 254;
    uint256 private constant _PRE_INTERACTION_CALL_FLAG = 1 << 252;
    uint256 private constant _POST_INTERACTION_CALL_FLAG = 1 << 251;
    uint256 private constant _NEED_CHECK_EPOCH_MANAGER_FLAG = 1 << 250;
    uint256 private constant _HAS_EXTENSION_FLAG = 1 << 249;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 248;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 247;
    /**
     * @notice Checks if the order has the extension flag set.
     * @dev If the `HAS_EXTENSION_FLAG` is set in the makerTraits, then the protocol expects that the order has extension(s).
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the flag is set.
     */
    function hasExtension(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _HAS_EXTENSION_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker allows a specific taker to fill the order.
     * @param makerTraits The traits of the maker.
     * @param sender The address of the taker to be checked.
     * @return result A boolean indicating whether the taker is allowed.
     */
    function isAllowedSender(MakerTraits makerTraits, address sender) internal pure returns (bool) {
        uint160 allowedSender = uint160(MakerTraits.unwrap(makerTraits) & _ALLOWED_SENDER_MASK);
        return allowedSender == 0 || allowedSender == uint160(sender) & _ALLOWED_SENDER_MASK;
    }
    /**
     * @notice Checks if the order has expired.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the order has expired.
     */
    function isExpired(MakerTraits makerTraits) internal view returns (bool) {
        uint256 expiration = (MakerTraits.unwrap(makerTraits) >> _EXPIRATION_OFFSET) & _EXPIRATION_MASK;
        return expiration != 0 && expiration < block.timestamp;  // solhint-disable-line not-rely-on-time
    }
    /**
     * @notice Returns the nonce or epoch of the order.
     * @param makerTraits The traits of the maker.
     * @return result The nonce or epoch of the order.
     */
    function nonceOrEpoch(MakerTraits makerTraits) internal pure returns (uint256) {
        return (MakerTraits.unwrap(makerTraits) >> _NONCE_OR_EPOCH_OFFSET) & _NONCE_OR_EPOCH_MASK;
    }
    /**
     * @notice Returns the series of the order.
     * @param makerTraits The traits of the maker.
     * @return result The series of the order.
     */
    function series(MakerTraits makerTraits) internal pure returns (uint256) {
        return (MakerTraits.unwrap(makerTraits) >> _SERIES_OFFSET) & _SERIES_MASK;
    }
    /**
      * @notice Determines if the order allows partial fills.
      * @dev If the _NO_PARTIAL_FILLS_FLAG is not set in the makerTraits, then the order allows partial fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the maker allows partial fills.
      */
    function allowPartialFills(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _NO_PARTIAL_FILLS_FLAG) == 0;
    }
    /**
     * @notice Checks if the maker needs pre-interaction call.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs a pre-interaction call.
     */
    function needPreInteractionCall(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _PRE_INTERACTION_CALL_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker needs post-interaction call.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs a post-interaction call.
     */
    function needPostInteractionCall(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _POST_INTERACTION_CALL_FLAG) != 0;
    }
    /**
      * @notice Determines if the order allows multiple fills.
      * @dev If the _ALLOW_MULTIPLE_FILLS_FLAG is set in the makerTraits, then the maker allows multiple fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the maker allows multiple fills.
      */
    function allowMultipleFills(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _ALLOW_MULTIPLE_FILLS_FLAG) != 0;
    }
    /**
      * @notice Determines if an order should use the bit invalidator or remaining amount validator.
      * @dev The bit invalidator can be used if the order does not allow partial or multiple fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the bit invalidator should be used.
      * True if the order requires the use of the bit invalidator.
      */
    function useBitInvalidator(MakerTraits makerTraits) internal pure returns (bool) {
        return !allowPartialFills(makerTraits) || !allowMultipleFills(makerTraits);
    }
    /**
     * @notice Checks if the maker needs to check the epoch.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs to check the epoch manager.
     */
    function needCheckEpochManager(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _NEED_CHECK_EPOCH_MANAGER_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker uses permit2.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker uses permit2.
     */
    function usePermit2(MakerTraits makerTraits) internal pure returns (bool) {
        return MakerTraits.unwrap(makerTraits) & _USE_PERMIT2_FLAG != 0;
    }
    /**
     * @notice Checks if the maker needs to unwraps WETH.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs to unwrap WETH.
     */
    function unwrapWeth(MakerTraits makerTraits) internal pure returns (bool) {
        return MakerTraits.unwrap(makerTraits) & _UNWRAP_WETH_FLAG != 0;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
type TakerTraits is uint256;
/**
 * @title TakerTraitsLib
 * @notice This library to manage and check TakerTraits, which are used to encode the taker's preferences for an order in a single uint256.
 * @dev The TakerTraits are structured as follows:
 * High bits are used for flags
 * 255 bit `_MAKER_AMOUNT_FLAG`           - If set, the taking amount is calculated based on making amount, otherwise making amount is calculated based on taking amount.
 * 254 bit `_UNWRAP_WETH_FLAG`            - If set, the WETH will be unwrapped into ETH before sending to taker.
 * 253 bit `_SKIP_ORDER_PERMIT_FLAG`      - If set, the order skips maker's permit execution.
 * 252 bit `_USE_PERMIT2_FLAG`            - If set, the order uses the permit2 function for authorization.
 * 251 bit `_ARGS_HAS_TARGET`             - If set, then first 20 bytes of args are treated as target address for maker’s funds transfer.
 * 224-247 bits `ARGS_EXTENSION_LENGTH`   - The length of the extension calldata in the args.
 * 200-223 bits `ARGS_INTERACTION_LENGTH` - The length of the interaction calldata in the args.
 * 0-184 bits                             - The threshold amount (the maximum amount a taker agrees to give in exchange for a making amount).
 */
library TakerTraitsLib {
    uint256 private constant _MAKER_AMOUNT_FLAG = 1 << 255;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 254;
    uint256 private constant _SKIP_ORDER_PERMIT_FLAG = 1 << 253;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 252;
    uint256 private constant _ARGS_HAS_TARGET = 1 << 251;
    uint256 private constant _ARGS_EXTENSION_LENGTH_OFFSET = 224;
    uint256 private constant _ARGS_EXTENSION_LENGTH_MASK = 0xffffff;
    uint256 private constant _ARGS_INTERACTION_LENGTH_OFFSET = 200;
    uint256 private constant _ARGS_INTERACTION_LENGTH_MASK = 0xffffff;
    uint256 private constant _AMOUNT_MASK = 0x000000000000000000ffffffffffffffffffffffffffffffffffffffffffffff;
    /**
     * @notice Checks if the args should contain target address.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the args should contain target address.
     */
    function argsHasTarget(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _ARGS_HAS_TARGET) != 0;
    }
    /**
     * @notice Retrieves the length of the extension calldata from the takerTraits.
     * @param takerTraits The traits of the taker.
     * @return result The length of the extension calldata encoded in the takerTraits.
     */
    function argsExtensionLength(TakerTraits takerTraits) internal pure returns (uint256) {
        return (TakerTraits.unwrap(takerTraits) >> _ARGS_EXTENSION_LENGTH_OFFSET) & _ARGS_EXTENSION_LENGTH_MASK;
    }
    /**
     * @notice Retrieves the length of the interaction calldata from the takerTraits.
     * @param takerTraits The traits of the taker.
     * @return result The length of the interaction calldata encoded in the takerTraits.
     */
    function argsInteractionLength(TakerTraits takerTraits) internal pure returns (uint256) {
        return (TakerTraits.unwrap(takerTraits) >> _ARGS_INTERACTION_LENGTH_OFFSET) & _ARGS_INTERACTION_LENGTH_MASK;
    }
    /**
     * @notice Checks if the taking amount should be calculated based on making amount.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the taking amount should be calculated based on making amount.
     */
    function isMakingAmount(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _MAKER_AMOUNT_FLAG) != 0;
    }
    /**
     * @notice Checks if the order should unwrap WETH and send ETH to taker.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order should unwrap WETH.
     */
    function unwrapWeth(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _UNWRAP_WETH_FLAG) != 0;
    }
    /**
     * @notice Checks if the order should skip maker's permit execution.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order don't apply permit.
     */
    function skipMakerPermit(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _SKIP_ORDER_PERMIT_FLAG) != 0;
    }
    /**
     * @notice Checks if the order uses the permit2 instead of permit.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order uses the permit2.
     */
    function usePermit2(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _USE_PERMIT2_FLAG) != 0;
    }
    /**
     * @notice Retrieves the threshold amount from the takerTraits.
     * The maximum amount a taker agrees to give in exchange for a making amount.
     * @param takerTraits The traits of the taker.
     * @return result The threshold amount encoded in the takerTraits.
     */
    function threshold(TakerTraits takerTraits) internal pure returns (uint256) {
        return TakerTraits.unwrap(takerTraits) & _AMOUNT_MASK;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IDaiLikePermit {
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IERC20MetadataUppercase {
    function NAME() external view returns (string memory); // solhint-disable-line func-name-mixedcase
    function SYMBOL() external view returns (string memory); // solhint-disable-line func-name-mixedcase
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IPermit2 {
    struct PermitDetails {
        // ERC20 token address
        address token;
        // the maximum amount allowed to spend
        uint160 amount;
        // timestamp at which a spender's token allowances become invalid
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    /// @notice The permit message signed for a single token allownce
    struct PermitSingle {
        // the permit data for a single token alownce
        PermitDetails details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }
    /// @notice Packed allowance
    struct PackedAllowance {
        // amount allowed
        uint160 amount;
        // permission expiry
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    function transferFrom(address user, address spender, uint160 amount, address token) external;
    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;
    function allowance(address user, address token, address spender) external view returns (PackedAllowance memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IWETH is IERC20 {
    event Deposit(address indexed dst, uint256 wad);
    event Withdrawal(address indexed src, uint256 wad);
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
type Address is uint256;
/**
* @dev Library for working with addresses encoded as uint256 values, which can include flags in the highest bits.
*/
library AddressLib {
    uint256 private constant _LOW_160_BIT_MASK = (1 << 160) - 1;
    /**
    * @notice Returns the address representation of a uint256.
    * @param a The uint256 value to convert to an address.
    * @return The address representation of the provided uint256 value.
    */
    function get(Address a) internal pure returns (address) {
        return address(uint160(Address.unwrap(a) & _LOW_160_BIT_MASK));
    }
    /**
    * @notice Checks if a given flag is set for the provided address.
    * @param a The address to check for the flag.
    * @param flag The flag to check for in the provided address.
    * @return True if the provided flag is set in the address, false otherwise.
    */
    function getFlag(Address a, uint256 flag) internal pure returns (bool) {
        return (Address.unwrap(a) & flag) != 0;
    }
    /**
    * @notice Returns a uint32 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint32 value.
    * @param offset The bit offset at which the uint32 value is stored.
    * @return The uint32 value stored in the address at the specified bit offset.
    */
    function getUint32(Address a, uint256 offset) internal pure returns (uint32) {
        return uint32(Address.unwrap(a) >> offset);
    }
    /**
    * @notice Returns a uint64 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint64 value.
    * @param offset The bit offset at which the uint64 value is stored.
    * @return The uint64 value stored in the address at the specified bit offset.
    */
    function getUint64(Address a, uint256 offset) internal pure returns (uint64) {
        return uint64(Address.unwrap(a) >> offset);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Revert reason forwarder.
library RevertReasonForwarder {
    /// @dev Forwards latest externall call revert.
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }
    /// @dev Returns latest external call revert reason.
    function reReason() internal pure returns (bytes memory reason) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            reason := mload(0x40)
            let length := returndatasize()
            mstore(reason, length)
            returndatacopy(add(reason, 0x20), 0, length)
            mstore(0x40, add(reason, add(0x20, length)))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import "../interfaces/IDaiLikePermit.sol";
import "../interfaces/IPermit2.sol";
import "../interfaces/IWETH.sol";
import "../libraries/RevertReasonForwarder.sol";
/**
 * @title Implements efficient safe methods for ERC20 interface.
 * @notice Compared to the standard ERC20, this implementation offers several enhancements:
 * 1. more gas-efficient, providing significant savings in transaction costs.
 * 2. support for different permit implementations
 * 3. forceApprove functionality
 * 4. support for WETH deposit and withdraw
 */
library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();
    error Permit2TransferAmountTooHigh();
    // Uniswap Permit2 address
    address private constant _PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
    bytes4 private constant _PERMIT_LENGTH_ERROR = 0x68275857;  // SafePermitBadLength.selector
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    /**
     * @notice Fetches the balance of a specific ERC20 token held by an account.
     * Consumes less gas then regular `ERC20.balanceOf`.
     * @dev Note that the implementation does not perform dirty bits cleaning, so it is the
     * responsibility of the caller to make sure that the higher 96 bits of the `account` parameter are clean.
     * @param token The IERC20 token contract for which the balance will be fetched.
     * @param account The address of the account whose token balance will be fetched.
     * @return tokenBalance The balance of the specified ERC20 token held by the account.
     */
    function safeBalanceOf(
        IERC20 token,
        address account
    ) internal view returns(uint256 tokenBalance) {
        bytes4 selector = IERC20.balanceOf.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            mstore(0x00, selector)
            mstore(0x04, account)
            let success := staticcall(gas(), token, 0x00, 0x24, 0x00, 0x20)
            tokenBalance := mload(0)
            if or(iszero(success), lt(returndatasize(), 0x20)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another.
     * @dev If permit2 is true, uses the Permit2 standard; otherwise uses the standard ERC20 transferFrom.
     * Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     * @param permit2 If true, uses the Permit2 standard for the transfer; otherwise uses the standard ERC20 transferFrom.
     */
    function safeTransferFromUniversal(
        IERC20 token,
        address from,
        address to,
        uint256 amount,
        bool permit2
    ) internal {
        if (permit2) {
            safeTransferFromPermit2(token, from, to, amount);
        } else {
            safeTransferFrom(token, from, to, amount);
        }
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another using the ERC20 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another using the Permit2 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFromPermit2(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (amount > type(uint160).max) revert Permit2TransferAmountTooHigh();
        bytes4 selector = IPermit2.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            mstore(add(data, 0x64), token)
            success := call(gas(), _PERMIT2, 0, data, 0x84, 0x0, 0x0)
            if success {
                success := gt(extcodesize(_PERMIT2), 0)
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    /**
     * @notice Attempts to safely transfer tokens to another address.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `to` parameter are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param value The amount of tokens to transfer.
     */
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }
    /**
     * @notice Attempts to approve a spender to spend a certain amount of tokens.
     * @dev If `approve(from, to, amount)` fails, it tries to set the allowance to zero, and retries the `approve` call.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function forceApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (
                !_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value)
            ) {
                revert ForceApproveFailed();
            }
        }
    }
    /**
     * @notice Safely increases the allowance of a spender.
     * @dev Increases with safe math check. Checks if the increased allowance will overflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to increase the allowance by.
     */
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }
    /**
     * @notice Safely decreases the allowance of a spender.
     * @dev Decreases with safe math check. Checks if the decreased allowance will underflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to decrease the allowance by.
     */
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, bytes calldata permit) internal {
        if (!tryPermit(token, msg.sender, address(this), permit)) RevertReasonForwarder.reRevert();
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with custom owner and spender parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The IERC20 token to execute the permit function on.
     * @param owner The owner of the tokens for which the permit is made.
     * @param spender The spender allowed to spend the tokens by the permit.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, address owner, address spender, bytes calldata permit) internal {
        if (!tryPermit(token, owner, spender, permit)) RevertReasonForwarder.reRevert();
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * @dev Invokes `tryPermit` with sender as owner and contract as spender.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     * @return success Returns true if the permit function was successfully executed, false otherwise.
     */
    function tryPermit(IERC20 token, bytes calldata permit) internal returns(bool success) {
        return tryPermit(token, msg.sender, address(this), permit);
    }
    /**
     * @notice The function attempts to call the permit function on a given ERC20 token.
     * @dev The function is designed to support a variety of permit functions, namely: IERC20Permit, IDaiLikePermit, and IPermit2.
     * It accommodates both Compact and Full formats of these permit types.
     * Please note, it is expected that the `expiration` parameter for the compact Permit2 and the `deadline` parameter
     * for the compact Permit are to be incremented by one before invoking this function. This approach is motivated by
     * gas efficiency considerations; as the unlimited expiration period is likely to be the most common scenario, and
     * zeros are cheaper to pass in terms of gas cost. Thus, callers should increment the expiration or deadline by one
     * before invocation for optimized performance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The address of the ERC20 token on which to call the permit function.
     * @param owner The owner of the tokens. This address should have signed the off-chain permit.
     * @param spender The address which will be approved for transfer of tokens.
     * @param permit The off-chain permit data, containing different fields depending on the type of permit function.
     * @return success A boolean indicating whether the permit call was successful.
     */
    function tryPermit(IERC20 token, address owner, address spender, bytes calldata permit) internal returns(bool success) {
        // load function selectors for different permit standards
        bytes4 permitSelector = IERC20Permit.permit.selector;
        bytes4 daiPermitSelector = IDaiLikePermit.permit.selector;
        bytes4 permit2Selector = IPermit2.permit.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // Switch case for different permit lengths, indicating different permit standards
            switch permit.length
            // Compact IERC20Permit
            case 100 {
                mstore(ptr, permitSelector)     // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender
                // Compact IERC20Permit.permit(uint256 value, uint32 deadline, uint256 r, uint256 vs)
                {  // stack too deep
                    let deadline := shr(224, calldataload(add(permit.offset, 0x20))) // loads permit.offset 0x20..0x23
                    let vs := calldataload(add(permit.offset, 0x44))                 // loads permit.offset 0x44..0x63
                    calldatacopy(add(ptr, 0x44), permit.offset, 0x20)            // store value     = copy permit.offset 0x00..0x19
                    mstore(add(ptr, 0x64), sub(deadline, 1))                     // store deadline  = deadline - 1
                    mstore(add(ptr, 0x84), add(27, shr(255, vs)))                // store v         = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xa4), add(permit.offset, 0x24), 0x20) // store r         = copy permit.offset 0x24..0x43
                    mstore(add(ptr, 0xc4), shr(1, shl(1, vs)))                   // store s         = vs without most significant bit
                }
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // Compact IDaiLikePermit
            case 72 {
                mstore(ptr, daiPermitSelector)  // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender
                // Compact IDaiLikePermit.permit(uint32 nonce, uint32 expiry, uint256 r, uint256 vs)
                {  // stack too deep
                    let expiry := shr(224, calldataload(add(permit.offset, 0x04))) // loads permit.offset 0x04..0x07
                    let vs := calldataload(add(permit.offset, 0x28))               // loads permit.offset 0x28..0x47
                    mstore(add(ptr, 0x44), shr(224, calldataload(permit.offset))) // store nonce   = copy permit.offset 0x00..0x03
                    mstore(add(ptr, 0x64), sub(expiry, 1))                        // store expiry  = expiry - 1
                    mstore(add(ptr, 0x84), true)                                  // store allowed = true
                    mstore(add(ptr, 0xa4), add(27, shr(255, vs)))                 // store v       = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xc4), add(permit.offset, 0x08), 0x20)  // store r       = copy permit.offset 0x08..0x27
                    mstore(add(ptr, 0xe4), shr(1, shl(1, vs)))                    // store s       = vs without most significant bit
                }
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // IERC20Permit
            case 224 {
                mstore(ptr, permitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // IDaiLikePermit
            case 256 {
                mstore(ptr, daiPermitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // Compact IPermit2
            case 96 {
                // Compact IPermit2.permit(uint160 amount, uint32 expiration, uint32 nonce, uint32 sigDeadline, uint256 r, uint256 vs)
                mstore(ptr, permit2Selector)  // store selector
                mstore(add(ptr, 0x04), owner) // store owner
                mstore(add(ptr, 0x24), token) // store token
                calldatacopy(add(ptr, 0x50), permit.offset, 0x14)             // store amount = copy permit.offset 0x00..0x13
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0x64), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x14))), 1))) // store expiration = ((permit.offset 0x14..0x17 - 1) & 0xffffffffffff)
                mstore(add(ptr, 0x84), shr(224, calldataload(add(permit.offset, 0x18)))) // store nonce = copy permit.offset 0x18..0x1b
                mstore(add(ptr, 0xa4), spender)                               // store spender
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0xc4), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x1c))), 1))) // store sigDeadline = ((permit.offset 0x1c..0x1f - 1) & 0xffffffffffff)
                mstore(add(ptr, 0xe4), 0x100)                                 // store offset = 256
                mstore(add(ptr, 0x104), 0x40)                                 // store length = 64
                calldatacopy(add(ptr, 0x124), add(permit.offset, 0x20), 0x20) // store r      = copy permit.offset 0x20..0x3f
                calldatacopy(add(ptr, 0x144), add(permit.offset, 0x40), 0x20) // store vs     = copy permit.offset 0x40..0x5f
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // IPermit2
            case 352 {
                mstore(ptr, permit2Selector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // Unknown
            default {
                mstore(ptr, _PERMIT_LENGTH_ERROR)
                revert(ptr, 4)
            }
        }
    }
    /**
     * @dev Executes a low level call to a token contract, making it resistant to reversion and erroneous boolean returns.
     * @param token The IERC20 token contract on which the call will be made.
     * @param selector The function signature that is to be called on the token contract.
     * @param to The address to which the token amount will be transferred.
     * @param amount The token amount to be transferred.
     * @return success A boolean indicating if the call was successful. Returns 'true' on success and 'false' on failure.
     * In case of success but no returned data, validates that the contract code exists.
     * In case of returned data, ensures that it's a boolean `true`.
     */
    function _makeCall(
        IERC20 token,
        bytes4 selector,
        address to,
        uint256 amount
    ) private returns (bool success) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
    }
    /**
     * @notice Safely deposits a specified amount of Ether into the IWETH contract. Consumes less gas then regular `IWETH.deposit`.
     * @param weth The IWETH token contract.
     * @param amount The amount of Ether to deposit into the IWETH contract.
     */
    function safeDeposit(IWETH weth, uint256 amount) internal {
        if (amount > 0) {
            bytes4 selector = IWETH.deposit.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                mstore(0, selector)
                if iszero(call(gas(), weth, amount, 0, 4, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract. Consumes less gas then regular `IWETH.withdraw`.
     * @dev Uses inline assembly to interact with the IWETH contract.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     */
    function safeWithdraw(IWETH weth, uint256 amount) internal {
        bytes4 selector = IWETH.withdraw.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            mstore(0, selector)
            mstore(4, amount)
            if iszero(call(gas(), weth, 0, 0, 0x24, 0, 0)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract to a specified recipient.
     * Consumes less gas then regular `IWETH.withdraw`.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     * @param to The recipient of the withdrawn Ether.
     */
    function safeWithdrawTo(IWETH weth, uint256 amount, address to) internal {
        safeWithdraw(weth, amount);
        if (to != address(this)) {
            assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
                if iszero(call(_RAW_CALL_GAS_LIMIT, to, amount, 0, 0, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Library with gas-efficient string operations
library StringUtil {
    function toHex(uint256 value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }
    function toHex(address value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }
    /// @dev this is the assembly adaptation of highly optimized toHex16 code from Mikhail Vladimirov
    /// https://stackoverflow.com/a/69266989
    function toHex(bytes memory data) internal pure returns (string memory result) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            function _toHex16(input) -> output {
                output := or(
                    and(input, 0xFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000),
                    shr(64, and(input, 0x0000000000000000FFFFFFFFFFFFFFFF00000000000000000000000000000000))
                )
                output := or(
                    and(output, 0xFFFFFFFF000000000000000000000000FFFFFFFF000000000000000000000000),
                    shr(32, and(output, 0x00000000FFFFFFFF000000000000000000000000FFFFFFFF0000000000000000))
                )
                output := or(
                    and(output, 0xFFFF000000000000FFFF000000000000FFFF000000000000FFFF000000000000),
                    shr(16, and(output, 0x0000FFFF000000000000FFFF000000000000FFFF000000000000FFFF00000000))
                )
                output := or(
                    and(output, 0xFF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000),
                    shr(8, and(output, 0x00FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000))
                )
                output := or(
                    shr(4, and(output, 0xF000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000)),
                    shr(8, and(output, 0x0F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F00))
                )
                output := add(
                    add(0x3030303030303030303030303030303030303030303030303030303030303030, output),
                    mul(
                        and(
                            shr(4, add(output, 0x0606060606060606060606060606060606060606060606060606060606060606)),
                            0x0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F
                        ),
                        7 // Change 7 to 39 for lower case output
                    )
                )
            }
            result := mload(0x40)
            let length := mload(data)
            let resultLength := shl(1, length)
            let toPtr := add(result, 0x22) // 32 bytes for length + 2 bytes for '0x'
            mstore(0x40, add(toPtr, resultLength)) // move free memory pointer
            mstore(add(result, 2), 0x3078) // 0x3078 is right aligned so we write to `result + 2`
            // to store the last 2 bytes in the beginning of the string
            mstore(result, add(resultLength, 2)) // extra 2 bytes for '0x'
            for {
                let fromPtr := add(data, 0x20)
                let endPtr := add(fromPtr, length)
            } lt(fromPtr, endPtr) {
                fromPtr := add(fromPtr, 0x20)
            } {
                let rawData := mload(fromPtr)
                let hexData := _toHex16(rawData)
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
                hexData := _toHex16(shl(128, rawData))
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import "../interfaces/IERC20MetadataUppercase.sol";
import "./SafeERC20.sol";
import "./StringUtil.sol";
/// @title Library, which allows usage of ETH as ERC20 and ERC20 itself. Uses SafeERC20 library for ERC20 interface.
library UniERC20 {
    using SafeERC20 for IERC20;
    error InsufficientBalance();
    error ApproveCalledOnETH();
    error NotEnoughValue();
    error FromIsNotSender();
    error ToIsNotThis();
    error ETHTransferFailed();
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(address(0));
    /// @dev Returns true if `token` is ETH.
    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }
    /// @dev Returns `account` ERC20 `token` balance.
    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }
    /// @dev `token` transfer `to` `amount`.
    /// Note that this function does nothing in case of zero amount.
    function uniTransfer(
        IERC20 token,
        address payable to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (address(this).balance < amount) revert InsufficientBalance();
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = to.call{value: amount, gas: _RAW_CALL_GAS_LIMIT}("");
                if (!success) revert ETHTransferFailed();
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }
    /// @dev `token` transfer `from` `to` `amount`.
    /// Note that this function does nothing in case of zero amount.
    function uniTransferFrom(
        IERC20 token,
        address payable from,
        address to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (msg.value < amount) revert NotEnoughValue();
                if (from != msg.sender) revert FromIsNotSender();
                if (to != address(this)) revert ToIsNotThis();
                if (msg.value > amount) {
                    // Return remainder if exist
                    unchecked {
                        // solhint-disable-next-line avoid-low-level-calls
                        (bool success, ) = from.call{value: msg.value - amount, gas: _RAW_CALL_GAS_LIMIT}("");
                        if (!success) revert ETHTransferFailed();
                    }
                }
            } else {
                token.safeTransferFrom(from, to, amount);
            }
        }
    }
    /// @dev Returns `token` symbol from ERC20 metadata.
    function uniSymbol(IERC20 token) internal view returns (string memory) {
        return _uniDecode(token, IERC20Metadata.symbol.selector, IERC20MetadataUppercase.SYMBOL.selector);
    }
    /// @dev Returns `token` name from ERC20 metadata.
    function uniName(IERC20 token) internal view returns (string memory) {
        return _uniDecode(token, IERC20Metadata.name.selector, IERC20MetadataUppercase.NAME.selector);
    }
    /// @dev Reverts if `token` is ETH, otherwise performs ERC20 forceApprove.
    function uniApprove(
        IERC20 token,
        address to,
        uint256 amount
    ) internal {
        if (isETH(token)) revert ApproveCalledOnETH();
        token.forceApprove(to, amount);
    }
    /// @dev 20K gas is provided to account for possible implementations of name/symbol
    /// (token implementation might be behind proxy or store the value in storage)
    function _uniDecode(
        IERC20 token,
        bytes4 lowerCaseSelector,
        bytes4 upperCaseSelector
    ) private view returns (string memory result) {
        if (isETH(token)) {
            return "ETH";
        }
        (bool success, bytes memory data) = address(token).staticcall{gas: 20000}(
            abi.encodeWithSelector(lowerCaseSelector)
        );
        if (!success) {
            (success, data) = address(token).staticcall{gas: 20000}(abi.encodeWithSelector(upperCaseSelector));
        }
        if (success && data.length >= 0x40) {
            (uint256 offset, uint256 len) = abi.decode(data, (uint256, uint256));
            /*
                return data is padded up to 32 bytes with ABI encoder also sometimes
                there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that overall data length is greater or equal than string length + extra 64 bytes
            */
            if (offset == 0x20 && data.length >= 0x40 + len) {
                assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                    result := add(data, 0x40)
                }
                return result;
            }
        }
        if (success && data.length == 32) {
            uint256 len = 0;
            while (len < data.length && data[len] >= 0x20 && data[len] <= 0x7E) {
                unchecked {
                    len++;
                }
            }
            if (len > 0) {
                assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                    mstore(data, len)
                }
                return string(data);
            }
        }
        return StringUtil.toHex(address(token));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
import {Context} from "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);
    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)
pragma solidity ^0.8.20;
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.
            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }
    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { IOrderMixin } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IOrderMixin.sol";
import { IPostInteraction } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IPostInteraction.sol";
import { IPreInteraction } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IPreInteraction.sol";
import { IAmountGetter } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IAmountGetter.sol";
/**
 * @title Base Extension contract
 * @notice Contract to define the basic functionality for the limit orders settlement.
 */
contract BaseExtension is IPreInteraction, IPostInteraction, IAmountGetter {
    error OnlyLimitOrderProtocol();
    uint256 private constant _BASE_POINTS = 10_000_000; // 100%
    uint256 private constant _GAS_PRICE_BASE = 1_000_000; // 1000 means 1 Gwei
    address private immutable _LIMIT_ORDER_PROTOCOL;
    /// @dev Modifier to check if the caller is the limit order protocol contract.
    modifier onlyLimitOrderProtocol {
        if (msg.sender != _LIMIT_ORDER_PROTOCOL) revert OnlyLimitOrderProtocol();
        _;
    }
    /**
     * @notice Initializes the contract.
     * @param limitOrderProtocol The limit order protocol contract.
     */
    constructor(address limitOrderProtocol) {
        _LIMIT_ORDER_PROTOCOL = limitOrderProtocol;
    }
    /**
     * See {IAmountGetter-getMakingAmount}
     */
    function getMakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata /* extension */,
        bytes32 /* orderHash */,
        address /* taker */,
        uint256 takingAmount,
        uint256 /* remainingMakingAmount */,
        bytes calldata extraData
    ) external view returns (uint256) {
        uint256 rateBump = _getRateBump(extraData);
        return Math.mulDiv(order.makingAmount, takingAmount * _BASE_POINTS, order.takingAmount * (_BASE_POINTS + rateBump));
    }
    /**
     * See {IAmountGetter-getTakingAmount}
     */
    function getTakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata /* extension */,
        bytes32 /* orderHash */,
        address /* taker */,
        uint256 makingAmount,
        uint256 /* remainingMakingAmount */,
        bytes calldata extraData
    ) external view returns (uint256) {
        uint256 rateBump = _getRateBump(extraData);
        return Math.mulDiv(order.takingAmount, makingAmount * (_BASE_POINTS + rateBump), order.makingAmount * _BASE_POINTS, Math.Rounding.Ceil);
    }
    /**
     * See {IPreInteraction-preInteraction}
     */
    function preInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external onlyLimitOrderProtocol {
        _preInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData);
    }
    /**
     * See {IPostInteraction-postInteraction}
     */
    function postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external onlyLimitOrderProtocol {
        _postInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData);
    }
    function _preInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual {}
    function _postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual {}
    /**
     * @dev Parses auction rate bump data from the `auctionDetails` field.
     * `gasBumpEstimate` and `gasPriceEstimate` are used to estimate the transaction costs
     * which are then offset from the auction rate bump.
     * @param auctionDetails AuctionDetails is a tightly packed struct of the following format:
     * ```
     * struct AuctionDetails {
     *     bytes3 gasBumpEstimate;
     *     bytes4 gasPriceEstimate;
     *     bytes4 auctionStartTime;
     *     bytes3 auctionDuration;
     *     bytes3 initialRateBump;
     *     (bytes3,bytes2)[N] pointsAndTimeDeltas;
     * }
     * ```
     * @return rateBump The rate bump.
     */
    function _getRateBump(bytes calldata auctionDetails) private view returns (uint256) {
        unchecked {
            uint256 gasBumpEstimate = uint24(bytes3(auctionDetails[0:3]));
            uint256 gasPriceEstimate = uint32(bytes4(auctionDetails[3:7]));
            uint256 gasBump = gasBumpEstimate == 0 || gasPriceEstimate == 0 ? 0 : gasBumpEstimate * block.basefee / gasPriceEstimate / _GAS_PRICE_BASE;
            uint256 auctionStartTime = uint32(bytes4(auctionDetails[7:11]));
            uint256 auctionFinishTime = auctionStartTime + uint24(bytes3(auctionDetails[11:14]));
            uint256 initialRateBump = uint24(bytes3(auctionDetails[14:17]));
            uint256 auctionBump = _getAuctionBump(auctionStartTime, auctionFinishTime, initialRateBump, auctionDetails[17:]);
            return auctionBump > gasBump ? auctionBump - gasBump : 0;
        }
    }
    /**
     * @dev Calculates auction price bump. Auction is represented as a piecewise linear function with `N` points.
     * Each point is represented as a pair of `(rateBump, timeDelta)`, where `rateBump` is the
     * rate bump in basis points and `timeDelta` is the time delta in seconds.
     * The rate bump is interpolated linearly between the points.
     * The last point is assumed to be `(0, auctionDuration)`.
     * @param auctionStartTime The time when the auction starts.
     * @param auctionFinishTime The time when the auction finishes.
     * @param initialRateBump The initial rate bump.
     * @param pointsAndTimeDeltas The points and time deltas structure.
     * @return The rate bump at the current time.
     */
    function _getAuctionBump(uint256 auctionStartTime, uint256 auctionFinishTime, uint256 initialRateBump, bytes calldata pointsAndTimeDeltas) private view returns (uint256) {
        unchecked {
            if (block.timestamp <= auctionStartTime) {
                return initialRateBump;
            } else if (block.timestamp >= auctionFinishTime) {
                return 0;
            }
            uint256 currentPointTime = auctionStartTime;
            uint256 currentRateBump = initialRateBump;
            while (pointsAndTimeDeltas.length > 0) {
                uint256 nextRateBump = uint24(bytes3(pointsAndTimeDeltas[:3]));
                uint256 nextPointTime = currentPointTime + uint16(bytes2(pointsAndTimeDeltas[3:5]));
                if (block.timestamp <= nextPointTime) {
                    return ((block.timestamp - currentPointTime) * nextRateBump + (nextPointTime - block.timestamp) * currentRateBump) / (nextPointTime - currentPointTime);
                }
                currentRateBump = nextRateBump;
                currentPointTime = nextPointTime;
                pointsAndTimeDeltas = pointsAndTimeDeltas[5:];
            }
            return (auctionFinishTime - block.timestamp) * currentRateBump / (auctionFinishTime - currentPointTime);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title Extension Library
 * @notice Library to retrieve data from the bitmap.
 */
library ExtensionLib {
    bytes1 private constant _RESOLVER_FEE_FLAG = 0x01;
    bytes1 private constant _INTEGRATOR_FEE_FLAG = 0x02;
    bytes1 private constant _CUSTOM_RECEIVER_FLAG = 0x04;
    uint256 private constant _WHITELIST_SHIFT = 3;
    /**
     * @notice Checks if the resolver fee is enabled
     * @param extraData Data to be processed in the extension
     * @return True if the resolver fee is enabled
     */
    function resolverFeeEnabled(bytes calldata extraData) internal pure returns (bool) {
        return extraData[extraData.length - 1] & _RESOLVER_FEE_FLAG == _RESOLVER_FEE_FLAG;
    }
    /**
     * @notice Checks if the integrator fee is enabled
     * @param extraData Data to be processed in the extension
     * @return True if the integrator fee is enabled
     */
    function integratorFeeEnabled(bytes calldata extraData) internal pure returns (bool) {
        return extraData[extraData.length - 1] & _INTEGRATOR_FEE_FLAG == _INTEGRATOR_FEE_FLAG;
    }
    /**
     * @notice Checks if the custom receiver is enabled
     * @param extraData Data to be processed in the extension
     * @return True if the custom receiver is specified
     */
    function hasCustomReceiver(bytes calldata extraData) internal pure returns (bool) {
        return extraData[extraData.length - 1] & _CUSTOM_RECEIVER_FLAG == _CUSTOM_RECEIVER_FLAG;
    }
    /**
     * @notice Gets the number of resolvers in the whitelist
     * @param extraData Data to be processed in the extension
     * @return The number of resolvers in the whitelist
     */
    function resolversCount(bytes calldata extraData) internal pure returns (uint256) {
        return uint8(extraData[extraData.length - 1]) >> _WHITELIST_SHIFT;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOrderMixin } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IOrderMixin.sol";
import { MakerTraits, MakerTraitsLib } from "@1inch/limit-order-protocol-contract/contracts/libraries/MakerTraitsLib.sol";
import { SafeERC20 } from "@1inch/solidity-utils/contracts/libraries/SafeERC20.sol";
import { Address, AddressLib } from "@1inch/solidity-utils/contracts/libraries/AddressLib.sol";
import { UniERC20 } from "@1inch/solidity-utils/contracts/libraries/UniERC20.sol";
import { BaseExtension } from "./BaseExtension.sol";
import { ExtensionLib } from "./ExtensionLib.sol";
/**
 * @title Integrator Fee Extension
 * @notice Abstract contract designed to integrate fee processing within the post-interaction phase of order execution.
 */
abstract contract IntegratorFeeExtension is BaseExtension, Ownable {
    using SafeERC20 for IERC20;
    using AddressLib for Address;
    using ExtensionLib for bytes;
    using MakerTraitsLib for MakerTraits;
    using UniERC20 for IERC20;
    /**
     * @dev Eth transfer failed. The target fallback may have reverted.
     */
    error EthTransferFailed();
    /// @dev Allows fees in range [1e-5, 0.65536]
    uint256 private constant _FEE_BASE = 1e5;
    address private immutable _WETH;
    constructor(address weth) {
        _WETH = weth;
    }
    /**
     * @notice Fallback function to receive ETH.
     */
    receive() external payable {}
    /**
     * @param extraData Structured data of length n bytes, segmented as follows:
     * [0:2]   - Fee percentage in basis points.
     * [2:22]  - Integrator address.
     * [22:42] - Custom receiver address.
     * [42:n]  - ExtraData for other extensions, not utilized by this integration fee extension.
     * [n] - Bitmap indicating usage flags, where `xxxx xx1x` signifies integration fee usage. Other bits in this bitmap are not used by this extension.
     */
    function _postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual override {
        if (extraData.integratorFeeEnabled()) {
            uint256 fee = takingAmount * uint256(uint16(bytes2(extraData))) / _FEE_BASE;
            address feeRecipient = address(bytes20(extraData[2:22]));
            extraData = extraData[22:];
            address receiver = order.maker.get();
            if (extraData.hasCustomReceiver()) {
                receiver = address(bytes20(extraData));
                extraData = extraData[20:];
            }
            bool isEth = order.takerAsset.get() == address(_WETH) && order.makerTraits.unwrapWeth();
            if (isEth) {
                if (fee > 0) {
                    _sendEth(feeRecipient, fee);
                }
                unchecked {
                    _sendEth(receiver, takingAmount - fee);
                }
            } else {
                if (fee > 0) {
                    IERC20(order.takerAsset.get()).safeTransfer(feeRecipient, fee);
                }
                unchecked {
                    IERC20(order.takerAsset.get()).safeTransfer(receiver, takingAmount - fee);
                }
            }
        }
        super._postInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData);
    }
    /**
     * @notice Retrieves funds accidently sent directly to the contract address
     * @param token ERC20 token to retrieve
     * @param amount amount to retrieve
     */
    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(payable(msg.sender), amount);
    }
    function _sendEth(address target, uint256 amount) private {
        (bool success, ) = target.call{value: amount}("");
        if (!success) {
            revert EthTransferFailed();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IOrderMixin } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IOrderMixin.sol";
import { FeeBankCharger } from "../FeeBankCharger.sol";
import { BaseExtension } from "./BaseExtension.sol";
import { ExtensionLib } from "./ExtensionLib.sol";
/**
 * @title Resolver Fee Extension
 * @notice Abstract contract used as an extension in settlement contract to charge a fee resolver in the `postInteraction` method.
 */
abstract contract ResolverFeeExtension is BaseExtension, FeeBankCharger {
    using ExtensionLib for bytes;
    uint256 private constant _ORDER_FEE_BASE_POINTS = 1e15;
    constructor(IERC20 feeToken, address owner) FeeBankCharger(feeToken, owner) {}
    /**
     * @dev Calculates the resolver fee.
     * @param fee Scaled resolver fee.
     * @param orderMakingAmount Making amount from the order.
     * @param actualMakingAmount Making amount that was actually filled.
     * @return resolverFee Calculated resolver fee.
     */
    function _getResolverFee(
        uint256 fee,
        uint256 orderMakingAmount,
        uint256 actualMakingAmount
    ) internal pure virtual returns(uint256) {
        return fee * _ORDER_FEE_BASE_POINTS * actualMakingAmount / orderMakingAmount;
    }
    /**
     * @param extraData Structured data of length n bytes, segmented as follows:
     * [0:4] - Resolver fee information.
     * [4:n] - ExtraData for other extensions, not utilized by this resolver fee extension.
     * [n] - Bitmap indicating usage flags, where `xxxx xxx1` signifies resolver fee usage. Other bits in this bitmap are not used by this extension.
     */
    function _postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual override {
        if (extraData.resolverFeeEnabled()) {
            uint256 resolverFee = _getResolverFee(uint256(uint32(bytes4(extraData[:4]))), order.makingAmount, makingAmount);
            _chargeFee(taker, resolverFee);
            extraData = extraData[4:];
        }
        super._postInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IOrderMixin } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IOrderMixin.sol";
import { BaseExtension } from "./BaseExtension.sol";
import { ExtensionLib } from "./ExtensionLib.sol";
/**
 * @title Whitelist Extension
 * @notice Abstract contract designed to check resolvers from orders in whitelist within the post-interaction phase of order execution.
 * Ensures that only transactions from whitelisted resolvers are processed, enhancing security and compliance.
 */
abstract contract WhitelistExtension is BaseExtension {
    using ExtensionLib for bytes;
    error ResolverIsNotWhitelisted();
    /**
     * @dev Validates whether the resolver is whitelisted.
     * @param whitelist Whitelist is tightly packed struct of the following format:
     * ```
     * struct WhitelistDetails {
     *     bytes4 auctionStartTime;
     *     (bytes10,bytes2)[N] resolversAddressesAndTimeDeltas;
     * }
     * ```
     * Resolvers in the list are sorted in ascending order by the time when they are allowed to interact with the order.
     * Time deltas represent the time in seconds between the adjacent resolvers.
     * Only 10 lowest bytes of the resolver address are used for comparison.
     * @param whitelistSize The amount of resolvers in the whitelist.
     * @param resolver The resolver to check.
     * @return Whether the resolver is whitelisted.
     */
    function _isWhitelisted(bytes calldata whitelist, uint256 whitelistSize, address resolver) internal view virtual returns (bool) {
        unchecked {
            uint256 allowedTime = uint32(bytes4(whitelist[0:4])); // initially set to auction start time
            whitelist = whitelist[4:];
            uint80 maskedResolverAddress = uint80(uint160(resolver));
            for (uint256 i = 0; i < whitelistSize; i++) {
                uint80 whitelistedAddress = uint80(bytes10(whitelist[:10]));
                allowedTime += uint16(bytes2(whitelist[10:12])); // add next time delta
                if (maskedResolverAddress == whitelistedAddress) {
                    return allowedTime <= block.timestamp;
                } else if (allowedTime > block.timestamp) {
                    return false;
                }
                whitelist = whitelist[12:];
            }
            return false;
        }
    }
    /**
     * @param extraData Structured data of length n bytes, segmented as follows:
     * [0:k] - Data as defined by the `whitelist` parameter for the `_isWhitelisted` method,
     *         where k depends on the amount of resolvers in the whitelist, as indicated by the bitmap in the last byte.
     * [k:n] - ExtraData for other extensions, not utilized by this whitelist extension.
     * [n]   - Bitmap `VVVV Vxxx` where V bits represent the amount of resolvers in the whitelist. The remaining bits in this bitmap are not used by this extension.
     */
    function _postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual override {
        uint256 resolversCount = extraData.resolversCount();
        unchecked {
            uint256 whitelistSize = 4 + resolversCount * 12;
            if (!_isWhitelisted(extraData[:whitelistSize], resolversCount, taker)) revert ResolverIsNotWhitelisted();
            super._postInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData[whitelistSize:]);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@1inch/solidity-utils/contracts/libraries/SafeERC20.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IFeeBankCharger } from "./interfaces/IFeeBankCharger.sol";
import { IFeeBank } from "./interfaces/IFeeBank.sol";
/**
 * @title FeeBank
 * @notice FeeBank contract introduces a credit system for paying fees.
 * A user can deposit tokens to the FeeBank contract, obtain credits and then use them to pay fees.
 * @dev FeeBank is coupled with FeeBankCharger to actually charge fees.
 */
contract FeeBank is IFeeBank, Ownable {
    using SafeERC20 for IERC20;
    error ZeroAddress();
    IERC20 private immutable _FEE_TOKEN;
    IFeeBankCharger private immutable _CHARGER;
    mapping(address account => uint256 availableCredit) private _accountDeposits;
    constructor(IFeeBankCharger charger, IERC20 feeToken, address owner) Ownable(owner) {
        if (address(feeToken) == address(0)) revert ZeroAddress();
        _CHARGER = charger;
        _FEE_TOKEN = feeToken;
    }
    /**
     * @notice See {IFeeBank-availableCredit}.
     */
    function availableCredit(address account) external view returns (uint256) {
        return _CHARGER.availableCredit(account);
    }
    /**
     * @notice See {IFeeBank-deposit}.
     */
    function deposit(uint256 amount) external returns (uint256) {
        return _depositFor(msg.sender, amount);
    }
    /**
     * @notice See {IFeeBank-depositFor}.
     */
    function depositFor(address account, uint256 amount) external returns (uint256) {
        return _depositFor(account, amount);
    }
    /**
     * @notice See {IFeeBank-depositWithPermit}.
     */
    function depositWithPermit(uint256 amount, bytes calldata permit) external returns (uint256) {
        return depositForWithPermit(msg.sender, amount, permit);
    }
    /**
     * @notice See {IFeeBank-depositForWithPermit}.
     */
    function depositForWithPermit(
        address account,
        uint256 amount,
        bytes calldata permit
    ) public returns (uint256) {
        _FEE_TOKEN.safePermit(permit);
        return _depositFor(account, amount);
    }
    /**
     * @notice See {IFeeBank-withdraw}.
     */
    function withdraw(uint256 amount) external returns (uint256) {
        return _withdrawTo(msg.sender, amount);
    }
    /**
     * @notice See {IFeeBank-withdrawTo}.
     */
    function withdrawTo(address account, uint256 amount) external returns (uint256) {
        return _withdrawTo(account, amount);
    }
    /**
     * @notice Admin method returns commissions spent by users.
     * @param accounts Accounts whose commissions are being withdrawn.
     * @return totalAccountFees The total amount of accounts commissions.
     */
    function gatherFees(address[] calldata accounts) external onlyOwner returns (uint256 totalAccountFees) {
        uint256 accountsLength = accounts.length;
        unchecked {
            for (uint256 i = 0; i < accountsLength; ++i) {
                address account = accounts[i];
                uint256 accountDeposit = _accountDeposits[account];
                uint256 availableCredit_ = _CHARGER.availableCredit(account);
                _accountDeposits[account] = availableCredit_;
                totalAccountFees += accountDeposit - availableCredit_;  // overflow is impossible due to checks in FeeBankCharger
            }
        }
        _FEE_TOKEN.safeTransfer(msg.sender, totalAccountFees);
    }
    function _depositFor(address account, uint256 amount) internal returns (uint256 totalAvailableCredit) {
        if (account == address(0)) revert ZeroAddress();
        _FEE_TOKEN.safeTransferFrom(msg.sender, address(this), amount);
        unchecked {
            _accountDeposits[account] += amount;  // overflow is impossible due to limited _FEE_TOKEN supply
        }
        totalAvailableCredit = _CHARGER.increaseAvailableCredit(account, amount);
    }
    function _withdrawTo(address account, uint256 amount) internal returns (uint256 totalAvailableCredit) {
        totalAvailableCredit = _CHARGER.decreaseAvailableCredit(msg.sender, amount);
        unchecked {
            _accountDeposits[msg.sender] -= amount;  // underflow is impossible due to checks in FeeBankCharger
        }
        _FEE_TOKEN.safeTransfer(account, amount);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IFeeBank } from "./interfaces/IFeeBank.sol";
import { IFeeBankCharger } from "./interfaces/IFeeBankCharger.sol";
import { FeeBank } from "./FeeBank.sol";
/**
 * @title FeeBankCharger
 * @notice FeeBankCharger contract implements logic to increase or decrease users' credits in FeeBank.
 */
contract FeeBankCharger is IFeeBankCharger {
    error OnlyFeeBankAccess();
    error NotEnoughCredit();
    /**
     * @notice See {IFeeBankCharger-feeBank}.
     */
    IFeeBank public immutable FEE_BANK;
    mapping(address => uint256) private _creditAllowance;
    /**
     * @dev Modifier to check if the sender is a FEE_BANK contract.
     */
    modifier onlyFeeBank() {
        if (msg.sender != address(FEE_BANK)) revert OnlyFeeBankAccess();
        _;
    }
    constructor(IERC20 feeToken, address owner) {
        FEE_BANK = new FeeBank(this, feeToken, owner);
    }
    /**
     * @notice See {IFeeBankCharger-availableCredit}.
     */
    function availableCredit(address account) external view returns (uint256) {
        return _creditAllowance[account];
    }
    /**
     * @notice See {IFeeBankCharger-increaseAvailableCredit}.
     */
    function increaseAvailableCredit(address account, uint256 amount) external onlyFeeBank returns (uint256 allowance) {
        allowance = _creditAllowance[account];
        unchecked {
            allowance += amount;  // overflow is impossible due to limited _token supply
        }
        _creditAllowance[account] = allowance;
    }
    /**
     * @notice See {IFeeBankCharger-decreaseAvailableCredit}.
     */
    function decreaseAvailableCredit(address account, uint256 amount) external onlyFeeBank returns (uint256 allowance) {
        return _creditAllowance[account] -= amount;  // checked math is needed to prevent underflow
    }
    /**
     * @notice Internal function that charges a specified fee from a given account's credit allowance.
     * @dev Reverts with 'NotEnoughCredit' if the account's credit allowance is insufficient to cover the fee.
     * @param account The address of the account from which the fee is being charged.
     * @param fee The amount of fee to be charged from the account.
     */
    function _chargeFee(address account, uint256 fee) internal virtual {
        if (fee > 0) {
            uint256 currentAllowance = _creditAllowance[account];
            if (currentAllowance < fee) revert NotEnoughCredit();
            unchecked {
                _creditAllowance[account] = currentAllowance - fee;
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IFeeBank {
    /**
     * @notice Returns the available credit for a given account in the FeeBank contract.
     * @param account The address of the account for which the available credit is being queried.
     * @return availableCredit The available credit of the queried account.
     */
    function availableCredit(address account) external view returns (uint256 availableCredit);
    /**
     * @notice Increases the caller's available credit by the specified amount.
     * @param amount The amount of credit to be added to the caller's account.
     * @return totalAvailableCredit The updated available credit of the caller's account.
     */
    function deposit(uint256 amount) external returns (uint256 totalAvailableCredit);
    /**
     * @notice Increases the specified account's available credit by the specified amount.
     * @param account The address of the account for which the available credit is being increased.
     * @param amount The amount of credit to be added to the account.
     * @return totalAvailableCredit The updated available credit of the specified account.
     */
    function depositFor(address account, uint256 amount) external returns (uint256 totalAvailableCredit);
    /**
     * @notice Increases the caller's available credit by a specified amount with permit.
     * @param amount The amount of credit to be added to the caller's account.
     * @param permit The permit data authorizing the transaction.
     * @return totalAvailableCredit The updated available credit of the caller's account.
     */
    function depositWithPermit(uint256 amount, bytes calldata permit) external returns (uint256 totalAvailableCredit);
    /**
     * @notice Increases the specified account's available credit by a specified amount with permit.
     * @param account The address of the account for which the available credit is being increased.
     * @param amount The amount of credit to be added to the account.
     * @param permit The permit data authorizing the transaction.
     * @return totalAvailableCredit The updated available credit of the specified account.
     */
    function depositForWithPermit(address account, uint256 amount, bytes calldata permit) external returns (uint256 totalAvailableCredit);
    /**
     * @notice Withdraws a specified amount of credit from the caller's account.
     * @param amount The amount of credit to be withdrawn from the caller's account.
     * @return totalAvailableCredit The updated available credit of the caller's account.
     */
    function withdraw(uint256 amount) external returns (uint256 totalAvailableCredit);
    /**
     * @notice Withdraws a specified amount of credit to the specified account.
     * @param account The address of the account to which the credit is being withdrawn.
     * @param amount The amount of credit to be withdrawn.
     * @return totalAvailableCredit The updated available credit of the caller's account.
     */
    function withdrawTo(address account, uint256 amount) external returns (uint256 totalAvailableCredit);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IFeeBank } from "./IFeeBank.sol";
interface IFeeBankCharger {
    /**
     * @notice Returns the instance of the FeeBank contract.
     * @return The instance of the FeeBank contract.
     */
    function FEE_BANK() external view returns (IFeeBank); // solhint-disable-line func-name-mixedcase
    /**
     * @notice Returns the available credit for a given account.
     * @param account The address of the account for which the available credit is being queried.
     * @return The available credit of the queried account.
     */
    function availableCredit(address account) external view returns (uint256);
    /**
     * @notice Increases the available credit of a given account by a specified amount.
     * @param account The address of the account for which the available credit is being increased.
     * @param amount The amount by which the available credit will be increased.
     * @return allowance The updated available credit of the specified account.
     */
    function increaseAvailableCredit(address account, uint256 amount) external returns (uint256 allowance);
    /**
     * @notice Decreases the available credit of a given account by a specified amount.
     * @param account The address of the account for which the available credit is being decreased.
     * @param amount The amount by which the available credit will be decreased.
     * @return allowance The updated available credit of the specified account.
     */
    function decreaseAvailableCredit(address account, uint256 amount) external returns (uint256 allowance);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IOrderMixin } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IOrderMixin.sol";
import { SimpleSettlement } from "./SimpleSettlement.sol";
/**
 * @title Settlement contract
 * @notice Contract to execute limit orders settlement on Mainnet, created by Fusion mode.
 */
contract Settlement is SimpleSettlement {
    error InvalidPriorityFee();
    constructor(address limitOrderProtocol, IERC20 feeToken, address weth, address owner)
        SimpleSettlement(limitOrderProtocol, feeToken, weth, owner)
    {}
    function _postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual override {
        if (!_isPriorityFeeValid()) revert InvalidPriorityFee();
        super._postInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData);
    }
    /**
     * @dev Validates priority fee according to the spec
     * https://snapshot.org/#/1inch.eth/proposal/0xa040c60050147a0f67042ae024673e92e813b5d2c0f748abf70ddfa1ed107cbe
     * For blocks with baseFee <10.6 gwei – the priorityFee is capped at 70% of the baseFee.
     * For blocks with baseFee between 10.6 gwei and 104.1 gwei – the priorityFee is capped at 50% of the baseFee.
     * For blocks with baseFee >104.1 gwei – priorityFee is capped at 65% of the block’s baseFee.
     */
    function _isPriorityFeeValid() internal view returns(bool) {
        unchecked {
            uint256 baseFee = block.basefee;
            uint256 priorityFee = tx.gasprice - baseFee;
            if (baseFee < 10.6 gwei) {
                return priorityFee * 100 <= baseFee * 70;
            } else if (baseFee > 104.1 gwei) {
                return priorityFee * 100 <= baseFee * 65;
            } else {
                return priorityFee * 2 <= baseFee;
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOrderMixin } from "@1inch/limit-order-protocol-contract/contracts/interfaces/IOrderMixin.sol";
import { BaseExtension } from "./extensions/BaseExtension.sol";
import { IntegratorFeeExtension } from "./extensions/IntegratorFeeExtension.sol";
import { ResolverFeeExtension } from "./extensions/ResolverFeeExtension.sol";
import { WhitelistExtension } from "./extensions/WhitelistExtension.sol";
/**
 * @title Simple Settlement contract
 * @notice Contract to execute limit orders settlement, created by Fusion mode.
 */
contract SimpleSettlement is WhitelistExtension, ResolverFeeExtension, IntegratorFeeExtension {
    /**
     * @notice Initializes the contract.
     * @param limitOrderProtocol The limit order protocol contract.
     * @param feeToken The token to charge protocol fees in.
     * @param weth The WETH address.
     * @param owner The owner of the contract.
     */
    constructor(address limitOrderProtocol, IERC20 feeToken, address weth, address owner)
        BaseExtension(limitOrderProtocol)
        ResolverFeeExtension(feeToken, owner)
        IntegratorFeeExtension(weth)
        Ownable(owner)
    {}
    function _postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) internal virtual override(WhitelistExtension, ResolverFeeExtension, IntegratorFeeExtension) {
        super._postInteraction(order, extension, orderHash, taker, makingAmount, takingAmount, remainingMakingAmount, extraData);
    }
}