// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {IStoneVault} from "../interfaces/IStoneVault.sol";
import {IStone} from "../interfaces/IStone.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
contract DepositBridge is ReentrancyGuard {
    address public immutable stone;
    address payable public immutable vault;
    uint16 public immutable dstChainId;
    event BridgeTo(
        address indexed srcAddr,
        bytes dstAddr,
        uint256 etherAmount,
        uint256 stoneAmount,
        uint256 gasPaid
    );
    constructor(address _stone, address payable _vault, uint16 _dstChainId) {
        stone = _stone;
        vault = _vault;
        dstChainId = _dstChainId;
    }
    function bridgeTo(
        uint256 _amount,
        bytes calldata _dstAddress,
        uint256 _gasPaidForCrossChain
    ) public payable returns (uint256 stoneMinted) {
        stoneMinted = bridge(
            msg.sender,
            _amount,
            _dstAddress,
            _gasPaidForCrossChain
        );
    }
    function bridge(
        address _srcAddr,
        uint256 _amount,
        bytes calldata _dstAddress,
        uint256 _gasPaidForCrossChain
    ) public payable nonReentrant returns (uint256 stoneMinted) {
        require(msg.value >= _amount + _gasPaidForCrossChain, "wrong amount");
        IStoneVault stoneVault = IStoneVault(vault);
        stoneMinted = stoneVault.deposit{value: _amount}();
        IStone stoneToken = IStone(stone);
        stoneToken.sendFrom{value: _gasPaidForCrossChain}(
            address(this),
            dstChainId,
            _dstAddress,
            stoneMinted,
            payable(_srcAddr),
            address(0),
            bytes("")
        );
        emit BridgeTo(
            _srcAddr,
            _dstAddress,
            _amount,
            stoneMinted,
            _gasPaidForCrossChain
        );
    }
    function estimateSendFee(
        uint256 _amount,
        bytes calldata _dstAddress
    ) public view returns (uint nativeFee, uint zroFee) {
        return
            IStone(stone).estimateSendFee(
                dstChainId,
                _dstAddress,
                _amount,
                false,
                bytes("")
            );
    }
    receive() external payable {
        bytes memory dstAddr = abi.encodePacked(msg.sender);
        (uint nativeFee, ) = this.estimateSendFee(msg.value, dstAddr);
        require(msg.value > nativeFee, "too little");
        uint256 amount = msg.value - nativeFee;
        this.bridge{value: msg.value}(msg.sender, amount, dstAddr, nativeFee);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface IStoneVault {
    function deposit() external payable returns (uint256 mintAmount);
    function requestWithdraw(uint256 _shares) external;
    function instantWithdraw(
        uint256 _amount,
        uint256 _shares
    ) external returns (uint256 actualWithdrawn);
    function cancelWithdraw(uint256 _shares) external;
    function rollToNextRound() external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface IStone {
    function sendFrom(
        address _from,
        uint16 _dstChainId,
        bytes calldata _toAddress,
        uint _amount,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes calldata _adapterParams
    ) external payable;
    function estimateSendFee(
        uint16 _dstChainId,
        bytes calldata _toAddress,
        uint _amount,
        bool _useZro,
        bytes calldata _adapterParams
    ) external view returns (uint nativeFee, uint zroFee);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor() {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }
    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }
    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import "@layerzerolabs/solidity-examples/contracts/token/oft/extension/BasedOFT.sol";
import {Minter} from "./Minter.sol";
contract Stone is BasedOFT {
    uint256 public constant DAY_INTERVAL = 24 * 60 * 60;
    address public minter;
    uint16 public constant PT_FEED = 1;
    uint16 public constant PT_SET_ENABLE = 2;
    uint16 public constant PT_SET_CAP = 3;
    uint256 public cap;
    bool public enable = true;
    mapping(uint256 => uint256) public quota;
    event FeedToChain(
        uint16 indexed dstChainId,
        address indexed from,
        bytes toAddress,
        uint price
    );
    event SetCapFor(uint16 indexed dstChainId, bytes toAddress, uint cap);
    event SetEnableFor(uint16 indexed dstChainId, bytes toAddress, bool flag);
    constructor(
        address _minter,
        address _layerZeroEndpoint,
        uint256 _cap
    ) BasedOFT("StakeStone Ether", "STONE", _layerZeroEndpoint) {
        minter = _minter;
        cap = _cap;
    }
    modifier onlyMinter() {
        require(msg.sender == minter, "NM");
        _;
    }
    function mint(address _to, uint256 _amount) external onlyMinter {
        _mint(_to, _amount);
    }
    function burn(address _from, uint256 _amount) external onlyMinter {
        _burn(_from, _amount);
    }
    function sendFrom(
        address _from,
        uint16 _dstChainId,
        bytes calldata _toAddress,
        uint _amount,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes calldata _adapterParams
    ) public payable override(IOFTCore, OFTCore) {
        require(enable, "invalid");
        uint256 id;
        assembly {
            id := chainid()
        }
        require(id != _dstChainId, "same chain");
        uint256 day = block.timestamp / DAY_INTERVAL;
        require(_amount + quota[day] <= cap, "Exceed cap");
        quota[day] = quota[day] + _amount;
        super.sendFrom(
            _from,
            _dstChainId,
            _toAddress,
            _amount,
            _refundAddress,
            _zroPaymentAddress,
            _adapterParams
        );
    }
    function updatePrice(
        uint16 _dstChainId,
        bytes memory _toAddress
    ) external payable returns (uint256 price) {
        require(enable, "invalid");
        uint256 id;
        assembly {
            id := chainid()
        }
        require(id != _dstChainId, "same chain");
        price = tokenPrice();
        bytes memory lzPayload = abi.encode(
            PT_FEED,
            _toAddress,
            price,
            block.timestamp
        );
        _lzSend(
            _dstChainId,
            lzPayload,
            payable(msg.sender),
            address(0),
            bytes(""),
            msg.value
        );
        emit FeedToChain(_dstChainId, msg.sender, _toAddress, price);
    }
    function setEnableFor(
        uint16 _dstChainId,
        bool _flag,
        bytes memory _toAddress
    ) external payable onlyOwner {
        uint256 id;
        assembly {
            id := chainid()
        }
        if (_dstChainId == id) {
            enable = _flag;
            emit SetEnableFor(
                _dstChainId,
                abi.encodePacked(address(this)),
                enable
            );
            return;
        }
        bytes memory lzPayload = abi.encode(PT_SET_ENABLE, _toAddress, _flag);
        _lzSend(
            _dstChainId,
            lzPayload,
            payable(msg.sender),
            address(0),
            bytes(""),
            msg.value
        );
        emit SetEnableFor(_dstChainId, _toAddress, _flag);
    }
    function setCapFor(
        uint16 _dstChainId,
        uint256 _cap,
        bytes memory _toAddress
    ) external payable onlyOwner {
        uint256 id;
        assembly {
            id := chainid()
        }
        if (_dstChainId == id) {
            cap = _cap;
            emit SetCapFor(_dstChainId, abi.encodePacked(address(this)), cap);
            return;
        }
        bytes memory lzPayload = abi.encode(PT_SET_CAP, _toAddress, _cap);
        _lzSend(
            _dstChainId,
            lzPayload,
            payable(msg.sender),
            address(0),
            bytes(""),
            msg.value
        );
        emit SetCapFor(_dstChainId, _toAddress, _cap);
    }
    function tokenPrice() public returns (uint256 price) {
        price = Minter(minter).getTokenPrice();
    }
    function getQuota() external view returns (uint256) {
        uint256 amount = quota[block.timestamp / DAY_INTERVAL];
        if (cap > amount && enable) {
            return cap - amount;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {Stone} from "./Stone.sol";
import {StoneVault} from "../StoneVault.sol";
contract Minter {
    // TODO: governable upgrade
    address public stone;
    address payable public vault;
    modifier onlyVault() {
        require(msg.sender == vault, "not vault");
        _;
    }
    constructor(address _stone, address payable _vault) {
        stone = _stone;
        vault = _vault;
    }
    function mint(address _to, uint256 _amount) external onlyVault {
        Stone(stone).mint(_to, _amount);
    }
    function burn(address _from, uint256 _amount) external onlyVault {
        Stone(stone).burn(_from, _amount);
    }
    function setNewVault(address _vault) external onlyVault {
        vault = payable(_vault);
    }
    function getTokenPrice() public returns (uint256 price) {
        price = StoneVault(vault).currentSharePrice();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
import {Strategy} from "./Strategy.sol";
import {AssetsVault} from "../AssetsVault.sol";
contract StrategyController {
    using EnumerableSet for EnumerableSet.AddressSet;
    uint256 internal constant ONE_HUNDRED_PERCENT = 1e6;
    address public stoneVault;
    address payable public immutable assetsVault;
    EnumerableSet.AddressSet private strategies;
    mapping(address => uint256) public ratios;
    struct StrategyDiff {
        address strategy;
        bool isDeposit;
        uint256 amount;
    }
    modifier onlyVault() {
        require(stoneVault == msg.sender, "not vault");
        _;
    }
    constructor(
        address payable _assetsVault,
        address[] memory _strategies,
        uint256[] memory _ratios
    ) {
        require(_assetsVault != address(0), "ZERO ADDRESS");
        uint256 length = _strategies.length;
        for (uint256 i; i < length; i++) {
            require(_strategies[i] != address(0), "ZERO ADDRESS");
        }
        stoneVault = msg.sender;
        assetsVault = _assetsVault;
        _initStrategies(_strategies, _ratios);
    }
    function onlyRebaseStrategies() external {
        _rebase(0, 0);
    }
    function forceWithdraw(
        uint256 _amount
    ) external onlyVault returns (uint256 actualAmount) {
        uint256 balanceBeforeRepay = address(this).balance;
        if (balanceBeforeRepay >= _amount) {
            _repayToVault();
            actualAmount = balanceBeforeRepay;
        } else {
            actualAmount =
                _forceWithdraw(_amount - balanceBeforeRepay) +
                balanceBeforeRepay;
        }
    }
    function setStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) external onlyVault {
        _setStrategies(_strategies, _ratios);
    }
    function addStrategy(address _strategy) external onlyVault {
        require(!strategies.contains(_strategy), "already exist");
        strategies.add(_strategy);
    }
    function rebaseStrategies(
        uint256 _in,
        uint256 _out
    ) external payable onlyVault {
        _rebase(_in, _out);
    }
    function destroyStrategy(address _strategy) external onlyVault {
        _destoryStrategy(_strategy);
    }
    function _rebase(uint256 _in, uint256 _out) internal {
        require(_in == 0 || _out == 0, "only deposit or withdraw");
        if (_in != 0) {
            AssetsVault(assetsVault).withdraw(address(this), _in);
        }
        uint256 total = getAllStrategyValidValue();
        if (total < _out) {
            total = 0;
        } else {
            total = total + _in - _out;
        }
        uint256 length = strategies.length();
        StrategyDiff[] memory diffs = new StrategyDiff[](length);
        uint256 head;
        uint256 tail = length - 1;
        for (uint i; i < length; i++) {
            address strategy = strategies.at(i);
            if (ratios[strategy] == 0) {
                _clearStrategy(strategy, true);
                continue;
            }
            uint256 newPosition = (total * ratios[strategy]) /
                ONE_HUNDRED_PERCENT;
            uint256 position = getStrategyValidValue(strategy);
            if (newPosition < position) {
                diffs[head] = StrategyDiff(
                    strategy,
                    false,
                    position - newPosition
                );
                head++;
            } else if (newPosition > position) {
                diffs[tail] = StrategyDiff(
                    strategy,
                    true,
                    newPosition - position
                );
                if (tail != 0) {
                    tail--;
                }
            }
        }
        length = diffs.length;
        for (uint256 i; i < length; i++) {
            StrategyDiff memory diff = diffs[i];
            if (diff.amount == 0) {
                continue;
            }
            if (diff.isDeposit) {
                if (address(this).balance < diff.amount) {
                    diff.amount = address(this).balance;
                }
                _depositToStrategy(diff.strategy, diff.amount);
            } else {
                _withdrawFromStrategy(diff.strategy, diff.amount);
            }
        }
        _repayToVault();
    }
    function _repayToVault() internal {
        if (address(this).balance != 0) {
            TransferHelper.safeTransferETH(assetsVault, address(this).balance);
        }
    }
    function _depositToStrategy(address _strategy, uint256 _amount) internal {
        Strategy(_strategy).deposit{value: _amount}();
    }
    function _withdrawFromStrategy(
        address _strategy,
        uint256 _amount
    ) internal {
        Strategy(_strategy).withdraw(_amount);
    }
    function _forceWithdraw(
        uint256 _amount
    ) internal returns (uint256 actualAmount) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            address strategy = strategies.at(i);
            uint256 withAmount = (_amount * ratios[strategy]) /
                ONE_HUNDRED_PERCENT;
            if (withAmount != 0) {
                actualAmount =
                    Strategy(strategy).instantWithdraw(withAmount) +
                    actualAmount;
            }
        }
        _repayToVault();
    }
    function getStrategyValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getAllValue();
    }
    function getStrategyValidValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getInvestedValue();
    }
    function getStrategyPendingValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getPendingValue();
    }
    function getAllStrategiesValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyValue(strategies.at(i));
        }
    }
    function getAllStrategyValidValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyValidValue(strategies.at(i));
        }
    }
    function getAllStrategyPendingValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyPendingValue(strategies.at(i));
        }
    }
    function getStrategies()
        public
        view
        returns (address[] memory addrs, uint256[] memory portions)
    {
        uint256 length = strategies.length();
        addrs = new address[](length);
        portions = new uint256[](length);
        for (uint256 i; i < length; i++) {
            address addr = strategies.at(i);
            addrs[i] = addr;
            portions[i] = ratios[addr];
        }
    }
    function _initStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) internal {
        require(_strategies.length == _ratios.length, "invalid length");
        uint256 totalRatio;
        uint256 length = _strategies.length;
        for (uint i; i < length; i++) {
            strategies.add(_strategies[i]);
            ratios[_strategies[i]] = _ratios[i];
            totalRatio = totalRatio + _ratios[i];
        }
        require(totalRatio <= ONE_HUNDRED_PERCENT, "exceed 100%");
    }
    function _setStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) internal {
        uint256 length = _strategies.length;
        require(length == _ratios.length, "invalid length");
        uint256 oldLength = strategies.length();
        for (uint i; i < oldLength; i++) {
            ratios[strategies.at(i)] = 0;
        }
        uint256 totalRatio;
        for (uint i; i < length; i++) {
            require(
                Strategy(_strategies[i]).controller() == address(this),
                "controller mismatch"
            );
            strategies.add(_strategies[i]);
            ratios[_strategies[i]] = _ratios[i];
            totalRatio = totalRatio + _ratios[i];
        }
        require(totalRatio <= ONE_HUNDRED_PERCENT, "exceed 100%");
    }
    function clearStrategy(address _strategy) public onlyVault {
        _clearStrategy(_strategy, false);
    }
    function _clearStrategy(address _strategy, bool _isRebase) internal {
        Strategy(_strategy).clear();
        if (!_isRebase) {
            _repayToVault();
        }
    }
    function _destoryStrategy(address _strategy) internal {
        require(_couldDestroyStrategy(_strategy), "still active");
        strategies.remove(_strategy);
        _repayToVault();
    }
    function _couldDestroyStrategy(
        address _strategy
    ) internal returns (bool status) {
        return
            ratios[_strategy] == 0 && Strategy(_strategy).getAllValue() < 1e4;
    }
    function setNewVault(address _vault) external onlyVault {
        stoneVault = _vault;
    }
    receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {StrategyController} from "../strategies/StrategyController.sol";
abstract contract Strategy {
    address payable public immutable controller;
    address public governance;
    string public name;
    modifier onlyGovernance() {
        require(governance == msg.sender, "not governace");
        _;
    }
    event TransferGovernance(address oldOwner, address newOwner);
    constructor(address payable _controller, string memory _name) {
        require(_controller != address(0), "ZERO ADDRESS");
        governance = msg.sender;
        controller = _controller;
        name = _name;
    }
    modifier onlyController() {
        require(controller == msg.sender, "not controller");
        _;
    }
    function deposit() public payable virtual onlyController {}
    function withdraw(
        uint256 _amount
    ) public virtual onlyController returns (uint256 actualAmount) {}
    function instantWithdraw(
        uint256 _amount
    ) public virtual onlyController returns (uint256 actualAmount) {}
    function clear() public virtual onlyController returns (uint256 amount) {}
    function execPendingRequest(
        uint256 _amount
    ) public virtual returns (uint256 amount) {}
    function getAllValue() public virtual returns (uint256 value) {}
    function getPendingValue() public virtual returns (uint256 value) {}
    function getInvestedValue() public virtual returns (uint256 value) {}
    function checkPendingStatus()
        public
        virtual
        returns (uint256 pending, uint256 executable)
    {}
    function setGovernance(address governance_) external onlyGovernance {
        emit TransferGovernance(governance, governance_);
        governance = governance_;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
library VaultMath {
    uint256 internal constant DECIMALS = 18;
    function assetToShares(
        uint256 _assetAmount,
        uint256 _assetPerShare
    ) internal pure returns (uint256) {
        require(_assetPerShare > 1, "Vault Lib: invalid assetPerShare");
        return (_assetAmount * (10 ** DECIMALS)) / _assetPerShare;
    }
    function sharesToAsset(
        uint256 _shares,
        uint256 _assetPerShare
    ) internal pure returns (uint256) {
        require(_assetPerShare > 1, "Vault Lib: invalid assetPerShare");
        return (_shares * _assetPerShare) / (10 ** DECIMALS);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
import {Minter} from "./token/Minter.sol";
import {Stone} from "./token/Stone.sol";
import {AssetsVault} from "./AssetsVault.sol";
import {StrategyController} from "./strategies/StrategyController.sol";
import {VaultMath} from "./libraries/VaultMath.sol";
contract StoneVault is ReentrancyGuard, Ownable {
    uint256 internal constant MULTIPLIER = 1e18;
    uint256 internal constant ONE_HUNDRED_PERCENT = 1e6;
    uint256 internal constant MAXMIUM_FEE_RATE = ONE_HUNDRED_PERCENT / 100; // 1%
    uint256 internal constant MINIMUM_REBASE_INTERVAL = 7 * 24 * 60 * 60;
    uint256 public constant VERSION = 1;
    uint256 public rebaseTimeInterval = 24 * 60 * 60;
    address public immutable minter;
    address public immutable stone;
    address payable public immutable strategyController;
    address payable public immutable assetsVault;
    address public proposal;
    address public feeRecipient;
    uint256 public latestRoundID;
    uint256 public withdrawableAmountInPast;
    uint256 public withdrawingSharesInPast;
    uint256 public withdrawingSharesInRound;
    uint256 public withdrawFeeRate;
    uint256 public rebaseTime;
    mapping(uint256 => uint256) public roundPricePerShare;
    mapping(uint256 => uint256) public settlementTime;
    mapping(address => UserReceipt) public userReceipts;
    struct UserReceipt {
        uint256 withdrawRound;
        uint256 withdrawShares;
        uint256 withdrawableAmount;
    }
    event Deposit(
        address indexed account,
        uint256 amount,
        uint256 mint,
        uint256 round
    );
    event InitiateWithdraw(
        address indexed account,
        uint256 shares,
        uint256 round
    );
    event CancelWithdraw(
        address indexed account,
        uint256 amount,
        uint256 round
    );
    event Withdrawn(address indexed account, uint256 amount, uint256 round);
    event WithdrawnFromStrategy(
        address indexed account,
        uint256 amount,
        uint256 actualAmount,
        uint256 round
    );
    event RollToNextRound(
        uint256 round,
        uint256 vaultIn,
        uint256 vaultOut,
        uint256 sharePrice
    );
    event StragetyAdded(address strategy);
    event StragetyDestroyed(address strategy);
    event StragetyCleared(address strategy);
    event PortfolioConfigUpdated(address[] strategies, uint256[] ratios);
    event FeeCharged(address indexed account, uint256 amount);
    event SetWithdrawFeeRate(uint256 oldRate, uint256 newRate);
    event SetFeeRecipient(address oldAddr, address newAddr);
    event SetRebaseInterval(uint256 interval);
    modifier onlyProposal() {
        require(proposal == msg.sender, "not proposal");
        _;
    }
    constructor(
        address _minter,
        address _proposal,
        address payable _assetsVault,
        address[] memory _strategies,
        uint256[] memory _ratios
    ) {
        require(
            _minter != address(0) &&
                _proposal != address(0) &&
                _assetsVault != address(0),
            "ZERO ADDRESS"
        );
        uint256 length = _strategies.length;
        for (uint256 i; i < length; i++) {
            require(_strategies[i] != address(0), "ZERO ADDRESS");
        }
        minter = _minter;
        proposal = _proposal;
        assetsVault = _assetsVault;
        feeRecipient = msg.sender;
        StrategyController controller = new StrategyController(
            _assetsVault,
            _strategies,
            _ratios
        );
        strategyController = payable(address(controller));
        stone = Minter(_minter).stone();
        roundPricePerShare[0] = MULTIPLIER;
        latestRoundID = 0;
    }
    function deposit()
        external
        payable
        nonReentrant
        returns (uint256 mintAmount)
    {
        mintAmount = _depositFor(msg.value, msg.sender);
    }
    function depositFor(
        address _user
    ) external payable nonReentrant returns (uint256 mintAmount) {
        mintAmount = _depositFor(msg.value, _user);
    }
    function _depositFor(
        uint256 _amount,
        address _user
    ) internal returns (uint256 mintAmount) {
        require(_amount != 0, "too small");
        uint256 sharePrice;
        uint256 currSharePrice = currentSharePrice();
        if (latestRoundID == 0) {
            sharePrice = MULTIPLIER;
        } else {
            uint256 latestSharePrice = roundPricePerShare[latestRoundID - 1];
            sharePrice = latestSharePrice > currSharePrice
                ? latestSharePrice
                : currSharePrice;
        }
        mintAmount = (_amount * MULTIPLIER) / sharePrice;
        AssetsVault(assetsVault).deposit{value: address(this).balance}();
        Minter(minter).mint(_user, mintAmount);
        emit Deposit(_user, _amount, mintAmount, latestRoundID);
    }
    function requestWithdraw(uint256 _shares) external nonReentrant {
        require(_shares != 0, "too small");
        require(latestRoundID != 0, "should withdraw instantly");
        Stone stoneToken = Stone(stone);
        Minter stoneMinter = Minter(minter);
        require(stoneToken.balanceOf(msg.sender) >= _shares, "exceed balance");
        TransferHelper.safeTransferFrom(
            stone,
            msg.sender,
            address(this),
            _shares
        );
        withdrawingSharesInRound = withdrawingSharesInRound + _shares;
        UserReceipt storage receipt = userReceipts[msg.sender];
        if (receipt.withdrawRound == latestRoundID) {
            receipt.withdrawShares = receipt.withdrawShares + _shares;
        } else if (receipt.withdrawRound == 0) {
            receipt.withdrawShares = _shares;
            receipt.withdrawRound = latestRoundID;
        } else {
            // Withdraw previous round share first
            uint256 withdrawAmount = VaultMath.sharesToAsset(
                receipt.withdrawShares,
                roundPricePerShare[receipt.withdrawRound]
            );
            stoneMinter.burn(address(this), receipt.withdrawShares);
            withdrawingSharesInPast =
                withdrawingSharesInPast -
                receipt.withdrawShares;
            receipt.withdrawShares = _shares;
            receipt.withdrawableAmount =
                receipt.withdrawableAmount +
                withdrawAmount;
            receipt.withdrawRound = latestRoundID;
        }
        emit InitiateWithdraw(msg.sender, _shares, latestRoundID);
    }
    function cancelWithdraw(uint256 _shares) external nonReentrant {
        require(_shares != 0, "too small");
        UserReceipt storage receipt = userReceipts[msg.sender];
        require(receipt.withdrawRound == latestRoundID, "no pending withdraw");
        require(receipt.withdrawShares >= _shares, "exceed pending withdraw");
        receipt.withdrawShares = receipt.withdrawShares - _shares;
        TransferHelper.safeTransfer(stone, msg.sender, _shares);
        if (receipt.withdrawShares == 0) {
            receipt.withdrawRound = 0;
        }
        withdrawingSharesInRound = withdrawingSharesInRound - _shares;
        emit CancelWithdraw(msg.sender, _shares, latestRoundID);
    }
    function instantWithdraw(
        uint256 _amount,
        uint256 _shares
    ) external nonReentrant returns (uint256 actualWithdrawn) {
        require(_amount != 0 || _shares != 0, "too small");
        AssetsVault aVault = AssetsVault(assetsVault);
        Minter stoneMinter = Minter(minter);
        (uint256 idleAmount, ) = getVaultAvailableAmount();
        if (_amount != 0) {
            UserReceipt storage receipt = userReceipts[msg.sender];
            if (
                receipt.withdrawRound != latestRoundID &&
                receipt.withdrawRound != 0
            ) {
                // Withdraw previous round share first
                uint256 withdrawAmount = VaultMath.sharesToAsset(
                    receipt.withdrawShares,
                    roundPricePerShare[receipt.withdrawRound]
                );
                stoneMinter.burn(address(this), receipt.withdrawShares);
                withdrawingSharesInPast =
                    withdrawingSharesInPast -
                    receipt.withdrawShares;
                receipt.withdrawShares = 0;
                receipt.withdrawableAmount =
                    receipt.withdrawableAmount +
                    withdrawAmount;
                receipt.withdrawRound = 0;
            }
            require(
                receipt.withdrawableAmount >= _amount,
                "exceed withdrawable"
            );
            receipt.withdrawableAmount = receipt.withdrawableAmount - _amount;
            withdrawableAmountInPast = withdrawableAmountInPast - _amount;
            actualWithdrawn = _amount;
            emit Withdrawn(msg.sender, _amount, latestRoundID);
        }
        if (_shares != 0) {
            uint256 sharePrice;
            if (latestRoundID == 0) {
                sharePrice = MULTIPLIER;
            } else {
                uint256 currSharePrice = currentSharePrice();
                uint256 latestSharePrice = roundPricePerShare[
                    latestRoundID - 1
                ];
                sharePrice = latestSharePrice < currSharePrice
                    ? latestSharePrice
                    : currSharePrice;
            }
            uint256 ethAmount = VaultMath.sharesToAsset(_shares, sharePrice);
            stoneMinter.burn(msg.sender, _shares);
            if (ethAmount <= idleAmount) {
                actualWithdrawn = actualWithdrawn + ethAmount;
                emit Withdrawn(msg.sender, ethAmount, latestRoundID);
            } else {
                actualWithdrawn = actualWithdrawn + idleAmount;
                ethAmount = ethAmount - idleAmount;
                StrategyController controller = StrategyController(
                    strategyController
                );
                uint256 actualAmount = controller.forceWithdraw(ethAmount);
                actualWithdrawn = actualWithdrawn + actualAmount;
                emit WithdrawnFromStrategy(
                    msg.sender,
                    ethAmount,
                    actualAmount,
                    latestRoundID
                );
            }
        }
        require(aVault.getBalance() >= actualWithdrawn, "still need wait");
        uint256 withFee;
        if (withdrawFeeRate != 0) {
            withFee = (actualWithdrawn * withdrawFeeRate) / ONE_HUNDRED_PERCENT;
            aVault.withdraw(feeRecipient, withFee);
            emit FeeCharged(msg.sender, withFee);
        }
        aVault.withdraw(msg.sender, actualWithdrawn - withFee);
    }
    function rollToNextRound() external {
        require(
            block.timestamp > rebaseTime + rebaseTimeInterval,
            "already rebased"
        );
        StrategyController controller = StrategyController(strategyController);
        AssetsVault aVault = AssetsVault(assetsVault);
        uint256 previewSharePrice = currentSharePrice();
        uint256 vaultBalance = aVault.getBalance();
        uint256 amountToWithdraw = VaultMath.sharesToAsset(
            withdrawingSharesInRound,
            previewSharePrice
        );
        uint256 amountVaultNeed = withdrawableAmountInPast + amountToWithdraw;
        uint256 allPendingValue = controller.getAllStrategyPendingValue();
        uint256 vaultIn;
        uint256 vaultOut;
        if (vaultBalance > amountVaultNeed) {
            vaultIn = vaultBalance - amountVaultNeed;
        } else if (vaultBalance + allPendingValue < amountVaultNeed) {
            vaultOut = amountVaultNeed - vaultBalance - allPendingValue;
        }
        controller.rebaseStrategies(vaultIn, vaultOut);
        uint256 newSharePrice = currentSharePrice();
        roundPricePerShare[latestRoundID] = previewSharePrice < newSharePrice
            ? previewSharePrice
            : newSharePrice;
        settlementTime[latestRoundID] = block.timestamp;
        latestRoundID = latestRoundID + 1;
        withdrawingSharesInPast =
            withdrawingSharesInPast +
            withdrawingSharesInRound;
        withdrawableAmountInPast =
            withdrawableAmountInPast +
            VaultMath.sharesToAsset(withdrawingSharesInRound, newSharePrice);
        withdrawingSharesInRound = 0;
        rebaseTime = block.timestamp;
        emit RollToNextRound(latestRoundID, vaultIn, vaultOut, newSharePrice);
    }
    function addStrategy(address _strategy) external onlyProposal {
        StrategyController controller = StrategyController(strategyController);
        controller.addStrategy(_strategy);
        emit StragetyAdded(_strategy);
    }
    function destroyStrategy(address _strategy) external onlyOwner {
        StrategyController controller = StrategyController(strategyController);
        controller.destroyStrategy(_strategy);
        emit StragetyDestroyed(_strategy);
    }
    function clearStrategy(address _strategy) external onlyOwner {
        StrategyController controller = StrategyController(strategyController);
        controller.clearStrategy(_strategy);
        emit StragetyCleared(_strategy);
    }
    function updatePortfolioConfig(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) external onlyProposal {
        StrategyController controller = StrategyController(strategyController);
        controller.setStrategies(_strategies, _ratios);
        emit PortfolioConfigUpdated(_strategies, _ratios);
    }
    function updateProposal(address _proposal) external onlyProposal {
        proposal = _proposal;
    }
    function migrateVault(address _vault) external onlyProposal {
        Minter(minter).setNewVault(_vault);
        AssetsVault(assetsVault).setNewVault(_vault);
        StrategyController(strategyController).setNewVault(_vault);
    }
    function currentSharePrice() public returns (uint256 price) {
        Stone stoneToken = Stone(stone);
        uint256 totalStone = stoneToken.totalSupply();
        if (
            latestRoundID == 0 ||
            totalStone == 0 ||
            totalStone == withdrawingSharesInPast
        ) {
            return MULTIPLIER;
        }
        uint256 etherAmount = AssetsVault(assetsVault).getBalance() +
            StrategyController(strategyController).getAllStrategiesValue() -
            withdrawableAmountInPast;
        uint256 activeShare = totalStone - withdrawingSharesInPast;
        return (etherAmount * MULTIPLIER) / activeShare;
    }
    function getVaultAvailableAmount()
        public
        returns (uint256 idleAmount, uint256 investedAmount)
    {
        AssetsVault vault = AssetsVault(assetsVault);
        if (vault.getBalance() > withdrawableAmountInPast) {
            idleAmount = vault.getBalance() - withdrawableAmountInPast;
        }
        investedAmount = StrategyController(strategyController)
            .getAllStrategyValidValue();
    }
    function setWithdrawFeeRate(uint256 _withdrawFeeRate) external onlyOwner {
        require(_withdrawFeeRate <= MAXMIUM_FEE_RATE, "exceed maximum");
        emit SetWithdrawFeeRate(withdrawFeeRate, _withdrawFeeRate);
        withdrawFeeRate = _withdrawFeeRate;
    }
    function setFeeRecipient(address _feeRecipient) external onlyOwner {
        require(_feeRecipient != address(0), "zero address");
        emit SetFeeRecipient(feeRecipient, _feeRecipient);
        feeRecipient = _feeRecipient;
    }
    function setRebaseInterval(uint256 _interval) external onlyOwner {
        require(_interval <= MINIMUM_REBASE_INTERVAL, "invalid");
        rebaseTimeInterval = _interval;
        emit SetRebaseInterval(rebaseTimeInterval);
    }
    receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
contract AssetsVault {
    address public stoneVault;
    address public strategyController;
    modifier onlyPermit() {
        require(
            stoneVault == msg.sender || strategyController == msg.sender,
            "not permit"
        );
        _;
    }
    constructor(address _stoneVault, address _strategyController) {
        require(
            _stoneVault != address(0) && _strategyController != address(0),
            "ZERO ADDRESS"
        );
        stoneVault = _stoneVault;
        strategyController = _strategyController;
    }
    function deposit() external payable {
        require(msg.value != 0, "too small");
    }
    function withdraw(address _to, uint256 _amount) external onlyPermit {
        TransferHelper.safeTransferETH(_to, _amount);
    }
    function setNewVault(address _vault) external onlyPermit {
        stoneVault = _vault;
    }
    function getBalance() external view returns (uint256 amount) {
        amount = address(this).balance;
    }
    receive() external payable {}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
library TransferHelper {
    /// @notice Transfers tokens from the targeted address to the given destination
    /// @notice Errors with 'STF' if transfer fails
    /// @param token The contract address of the token to be transferred
    /// @param from The originating address from which the tokens will be transferred
    /// @param to The destination address of the transfer
    /// @param value The amount to be transferred
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) =
            token.call(abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'STF');
    }
    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Errors with ST if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'ST');
    }
    /// @notice Approves the stipulated contract to spend the given allowance in the given token
    /// @dev Errors with 'SA' if transfer fails
    /// @param token The contract address of the token to be approved
    /// @param to The target of the approval
    /// @param value The amount of the given token the target will be allowed to spend
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'SA');
    }
    /// @notice Transfers ETH to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'STE');
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.
    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];
        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.
            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;
            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];
                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }
            // Delete the slot where the moved value was stored
            set._values.pop();
            // Delete the index for the deleted slot
            delete set._indexes[value];
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }
    // Bytes32Set
    struct Bytes32Set {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // AddressSet
    struct AddressSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // UintSet
    struct UintSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;
    mapping(address => mapping(address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }
        return true;
    }
    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(from, to, amount);
        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }
        emit Transfer(from, to, amount);
        _afterTokenTransfer(from, to, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);
        _afterTokenTransfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }
        emit Transfer(account, address(0), amount);
        _afterTokenTransfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor() {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }
    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }
    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.7.6;
library ExcessivelySafeCall {
    uint256 constant LOW_28_MASK =
    0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := call(
            _gas, // gas
            _target, // recipient
            0, // ether value
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }
    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeStaticCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal view returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := staticcall(
            _gas, // gas
            _target, // recipient
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }
    /**
     * @notice Swaps function selectors in encoded contract calls
     * @dev Allows reuse of encoded calldata for functions with identical
     * argument types but different names. It simply swaps out the first 4 bytes
     * for the new selector. This function modifies memory in place, and should
     * only be used with caution.
     * @param _newSelector The new 4-byte selector
     * @param _buf The encoded contract args
     */
    function swapSelector(bytes4 _newSelector, bytes memory _buf)
    internal
    pure
    {
        require(_buf.length >= 4);
        uint256 _mask = LOW_28_MASK;
        assembly {
        // load the first word of
            let _word := mload(add(_buf, 0x20))
        // mask out the top 4 bytes
        // /x
            _word := and(_word, _mask)
            _word := or(_newSelector, _word)
            mstore(add(_buf, 0x20), _word)
        }
    }
}
// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
    internal
    pure
    returns (bytes memory)
    {
        bytes memory tempBytes;
        assembly {
        // Get a location of some free memory and store it in tempBytes as
        // Solidity does for memory variables.
            tempBytes := mload(0x40)
        // Store the length of the first bytes array at the beginning of
        // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)
        // Maintain a memory counter for the current write location in the
        // temp bytes array by adding the 32 bytes for the array length to
        // the starting location.
            let mc := add(tempBytes, 0x20)
        // Stop copying when the memory counter reaches the length of the
        // first bytes array.
            let end := add(mc, length)
            for {
            // Initialize a copy counter to the start of the _preBytes data,
            // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
            // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
            // Write the _preBytes data into the tempBytes memory 32 bytes
            // at a time.
                mstore(mc, mload(cc))
            }
        // Add the length of _postBytes to the current length of tempBytes
        // and store it as the new length in the first 32 bytes of the
        // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))
        // Move the memory counter back from a multiple of 0x20 to the
        // actual end of the _preBytes data.
            mc := end
        // Stop copying when the memory counter reaches the new combined
        // length of the arrays.
            end := add(mc, length)
            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }
        // Update the free-memory pointer by padding our last write location
        // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
        // next 32 byte block, then round down to the nearest multiple of
        // 32. If the sum of the length of the two arrays is zero then add
        // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
            add(add(end, iszero(add(length, mload(_preBytes)))), 31),
            not(31) // Round down to the nearest 32 bytes.
            ))
        }
        return tempBytes;
    }
    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
        // Read the first 32 bytes of _preBytes storage, which is the length
        // of the array. (We don't need to use the offset into the slot
        // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
        // Arrays of 31 bytes or less have an even value in their slot,
        // while longer arrays have an odd value. The actual length is
        // the slot divided by two for odd values, and the lowest order
        // byte divided by two for even values.
        // If the slot is even, bitwise and the slot with 255 and divide by
        // two to get the length. If the slot is odd, bitwise and the slot
        // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
        // slength can contain both the length and contents of the array
        // if length < 32 bytes so let's prepare for that
        // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
            // Since the new array still fits in the slot, we just need to
            // update the contents of the slot.
            // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                _preBytes.slot,
                // all the modifications to the slot are inside this
                // next block
                add(
                // we can just add to the slot contents because the
                // bytes we want to change are the LSBs
                fslot,
                add(
                mul(
                div(
                // load the bytes from memory
                mload(add(_postBytes, 0x20)),
                // zero all bytes to the right
                exp(0x100, sub(32, mlength))
                ),
                // and now shift left the number of bytes to
                // leave space for the length in the slot
                exp(0x100, sub(32, newlength))
                ),
                // increase length by the double of the memory
                // bytes length
                mul(mlength, 2)
                )
                )
                )
            }
            case 1 {
            // The stored value fits in the slot, but the combined value
            // will exceed it.
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
            // The contents of the _postBytes array start 32 bytes into
            // the structure. Our first read should obtain the `submod`
            // bytes that can fit into the unused space in the last word
            // of the stored array. To get this, we read 32 bytes starting
            // from `submod`, so the data we read overlaps with the array
            // contents by `submod` bytes. Masking the lowest-order
            // `submod` bytes allows us to add that value directly to the
            // stored value.
                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(
                sc,
                add(
                and(
                fslot,
                0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                ),
                and(mload(mc), mask)
                )
                )
                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
            // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
            // Copy over the first `submod` bytes of the new data as in
            // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(sc, add(sload(sc), and(mload(mc), mask)))
                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }
    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
    internal
    pure
    returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");
        bytes memory tempBytes;
        assembly {
            switch iszero(_length)
            case 0 {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
                tempBytes := mload(0x40)
            // The first word of the slice result is potentially a partial
            // word read from the original array. To read it, we calculate
            // the length of that partial word and start copying that many
            // bytes into the array. The first word we copy will start with
            // data we don't care about, but the last `lengthmod` bytes will
            // land at the beginning of the contents of the new array. When
            // we're done copying, we overwrite the full first word with
            // the actual length of the slice.
                let lengthmod := and(_length, 31)
            // The multiplication in the next line is necessary
            // because when slicing multiples of 32 bytes (lengthmod == 0)
            // the following copy loop was copying the origin's length
            // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)
                for {
                // The multiplication in the next line has the same exact purpose
                // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }
                mstore(tempBytes, _length)
            //update free-memory pointer
            //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
            //zero out the 32 bytes slice we are about to return
            //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)
                mstore(0x40, add(tempBytes, 0x20))
            }
        }
        return tempBytes;
    }
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;
        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }
        return tempAddress;
    }
    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }
        return tempUint;
    }
    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }
        return tempUint;
    }
    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }
        return tempUint;
    }
    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }
        return tempUint;
    }
    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }
        return tempUint;
    }
    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }
        return tempUint;
    }
    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }
        return tempUint;
    }
    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;
        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }
        return tempBytes32;
    }
    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;
        assembly {
            let length := mload(_preBytes)
        // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
            // cb is a circuit breaker in the for loop since there's
            //  no said feature for inline assembly loops
            // cb = 1 - don't breaker
            // cb = 0 - break
                let cb := 1
                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)
                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                    // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }
        return success;
    }
    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
    internal
    view
    returns (bool)
    {
        bool success = true;
        assembly {
        // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
        // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
        // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                    // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)
                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                        // unsuccess:
                            success := 0
                        }
                    }
                    default {
                    // cb is a circuit breaker in the for loop since there's
                    //  no said feature for inline assembly loops
                    // cb = 1 - don't breaker
                    // cb = 0 - break
                        let cb := 1
                    // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)
                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                            // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }
        return success;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../OFT.sol";
contract BasedOFT is OFT {
    constructor(string memory _name, string memory _symbol, address _lzEndpoint) OFT(_name, _symbol, _lzEndpoint) {}
    function circulatingSupply() public view virtual override returns (uint) {
        unchecked {
            return totalSupply() - balanceOf(address(this));
        }
    }
    function _debitFrom(address _from, uint16, bytes memory, uint _amount) internal virtual override returns(uint) {
        address spender = _msgSender();
        if (_from != spender) _spendAllowance(_from, spender, _amount);
        _transfer(_from, address(this), _amount);
        return _amount;
    }
    function _creditTo(uint16, address _toAddress, uint _amount) internal virtual override returns(uint) {
        _transfer(address(this), _toAddress, _amount);
        return _amount;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../lzApp/NonblockingLzApp.sol";
import "./IOFTCore.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
abstract contract OFTCore is NonblockingLzApp, ERC165, IOFTCore {
    using BytesLib for bytes;
    uint public constant NO_EXTRA_GAS = 0;
    // packet type
    uint16 public constant PT_SEND = 0;
    bool public useCustomAdapterParams;
    constructor(address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {}
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IOFTCore).interfaceId || super.supportsInterface(interfaceId);
    }
    function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        // mock the payload for sendFrom()
        bytes memory payload = abi.encode(PT_SEND, _toAddress, _amount);
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }
    function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) public payable virtual override {
        _send(_from, _dstChainId, _toAddress, _amount, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    function setUseCustomAdapterParams(bool _useCustomAdapterParams) public virtual onlyOwner {
        useCustomAdapterParams = _useCustomAdapterParams;
        emit SetUseCustomAdapterParams(_useCustomAdapterParams);
    }
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        uint16 packetType;
        assembly {
            packetType := mload(add(_payload, 32))
        }
        if (packetType == PT_SEND) {
            _sendAck(_srcChainId, _srcAddress, _nonce, _payload);
        } else {
            revert("OFTCore: unknown packet type");
        }
    }
    function _send(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) internal virtual {
        _checkAdapterParams(_dstChainId, PT_SEND, _adapterParams, NO_EXTRA_GAS);
        uint amount = _debitFrom(_from, _dstChainId, _toAddress, _amount);
        bytes memory lzPayload = abi.encode(PT_SEND, _toAddress, amount);
        _lzSend(_dstChainId, lzPayload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
        emit SendToChain(_dstChainId, _from, _toAddress, amount);
    }
    function _sendAck(uint16 _srcChainId, bytes memory, uint64, bytes memory _payload) internal virtual {
        (, bytes memory toAddressBytes, uint amount) = abi.decode(_payload, (uint16, bytes, uint));
        address to = toAddressBytes.toAddress(0);
        amount = _creditTo(_srcChainId, to, amount);
        emit ReceiveFromChain(_srcChainId, to, amount);
    }
    function _checkAdapterParams(uint16 _dstChainId, uint16 _pkType, bytes memory _adapterParams, uint _extraGas) internal virtual {
        if (useCustomAdapterParams) {
            _checkGasLimit(_dstChainId, _pkType, _adapterParams, _extraGas);
        } else {
            require(_adapterParams.length == 0, "OFTCore: _adapterParams must be empty.");
        }
    }
    function _debitFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _amount) internal virtual returns(uint);
    function _creditTo(uint16 _srcChainId, address _toAddress, uint _amount) internal virtual returns(uint);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "./IOFT.sol";
import "./OFTCore.sol";
// override decimal() function is needed
contract OFT is OFTCore, ERC20, IOFT {
    constructor(string memory _name, string memory _symbol, address _lzEndpoint) ERC20(_name, _symbol) OFTCore(_lzEndpoint) {}
    function supportsInterface(bytes4 interfaceId) public view virtual override(OFTCore, IERC165) returns (bool) {
        return interfaceId == type(IOFT).interfaceId || interfaceId == type(IERC20).interfaceId || super.supportsInterface(interfaceId);
    }
    function token() public view virtual override returns (address) {
        return address(this);
    }
    function circulatingSupply() public view virtual override returns (uint) {
        return totalSupply();
    }
    function _debitFrom(address _from, uint16, bytes memory, uint _amount) internal virtual override returns(uint) {
        address spender = _msgSender();
        if (_from != spender) _spendAllowance(_from, spender, _amount);
        _burn(_from, _amount);
        return _amount;
    }
    function _creditTo(uint16, address _toAddress, uint _amount) internal virtual override returns(uint) {
        _mint(_toAddress, _amount);
        return _amount;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Interface of the IOFT core standard
 */
interface IOFTCore is IERC165 {
    /**
     * @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
     * _dstChainId - L0 defined chain id to send tokens too
     * _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
     * _amount - amount of the tokens to transfer
     * _useZro - indicates to use zro to pay L0 fees
     * _adapterParam - flexible bytes array to indicate messaging adapter services in L0
     */
    function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
    /**
     * @dev send `_amount` amount of token to (`_dstChainId`, `_toAddress`) from `_from`
     * `_from` the owner of token
     * `_dstChainId` the destination chain identifier
     * `_toAddress` can be any size depending on the `dstChainId`.
     * `_amount` the quantity of tokens in wei
     * `_refundAddress` the address LayerZero refunds if too much message fee is sent
     * `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
     * `_adapterParams` is a flexible bytes array to indicate messaging adapter services
     */
    function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    /**
     * @dev returns the circulating amount of tokens on current chain
     */
    function circulatingSupply() external view returns (uint);
    /**
     * @dev returns the address of the ERC20 token
     */
    function token() external view returns (address);
    /**
     * @dev Emitted when `_amount` tokens are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
     * `_nonce` is the outbound nonce
     */
    event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes _toAddress, uint _amount);
    /**
     * @dev Emitted when `_amount` tokens are received from `_srcChainId` into the `_toAddress` on the local chain.
     * `_nonce` is the inbound nonce.
     */
    event ReceiveFromChain(uint16 indexed _srcChainId, address indexed _to, uint _amount);
    event SetUseCustomAdapterParams(bool _useCustomAdapterParams);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./IOFTCore.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
 * @dev Interface of the OFT standard
 */
interface IOFT is IOFTCore, IERC20 {
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./LzApp.sol";
import "../util/ExcessivelySafeCall.sol";
/*
 * the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
 * this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
 * NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
 */
abstract contract NonblockingLzApp is LzApp {
    using ExcessivelySafeCall for address;
    constructor(address _endpoint) LzApp(_endpoint) {}
    mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;
    event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
    event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);
    // overriding the virtual function in LzReceiver
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload));
        // try-catch all errors/exceptions
        if (!success) {
            _storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
        }
    }
    function _storeFailedMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload, bytes memory _reason) internal virtual {
        failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
        emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
    }
    function nonblockingLzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual {
        // only internal transaction
        require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }
    //@notice override this function
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
    function retryMessage(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public payable virtual {
        // assert there is message to retry
        bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
        require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
        require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
        // clear the stored message
        failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
        // execute the message. revert if it fails again
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
        emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "../interfaces/ILayerZeroReceiver.sol";
import "../interfaces/ILayerZeroUserApplicationConfig.sol";
import "../interfaces/ILayerZeroEndpoint.sol";
import "../util/BytesLib.sol";
/*
 * a generic LzReceiver implementation
 */
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    using BytesLib for bytes;
    // ua can not send payload larger than this by default, but it can be changed by the ua owner
    uint constant public DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;
    ILayerZeroEndpoint public immutable lzEndpoint;
    mapping(uint16 => bytes) public trustedRemoteLookup;
    mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
    mapping(uint16 => uint) public payloadSizeLimitLookup;
    address public precrime;
    event SetPrecrime(address precrime);
    event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
    event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
    event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);
    constructor(address _endpoint) {
        lzEndpoint = ILayerZeroEndpoint(_endpoint);
    }
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual override {
        // lzReceive must be called by the endpoint for security
        require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");
        bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
        // if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
        require(_srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote), "LzApp: invalid source sending contract");
        _blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }
    // abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
    function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams, uint _nativeFee) internal virtual {
        bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
        require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
        _checkPayloadSize(_dstChainId, _payload.length);
        lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    function _checkGasLimit(uint16 _dstChainId, uint16 _type, bytes memory _adapterParams, uint _extraGas) internal view virtual {
        uint providedGasLimit = _getGasLimit(_adapterParams);
        uint minGasLimit = minDstGasLookup[_dstChainId][_type] + _extraGas;
        require(minGasLimit > 0, "LzApp: minGasLimit not set");
        require(providedGasLimit >= minGasLimit, "LzApp: gas limit is too low");
    }
    function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
        require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
        assembly {
            gasLimit := mload(add(_adapterParams, 34))
        }
    }
    function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
        uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
        if (payloadSizeLimit == 0) { // use default if not set
            payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
        }
        require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
    }
    //---------------------------UserApplication config----------------------------------------
    function getConfig(uint16 _version, uint16 _chainId, address, uint _configType) external view returns (bytes memory) {
        return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
    }
    // generic config for LayerZero user Application
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override onlyOwner {
        lzEndpoint.setConfig(_version, _chainId, _configType, _config);
    }
    function setSendVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setSendVersion(_version);
    }
    function setReceiveVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setReceiveVersion(_version);
    }
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }
    // _path = abi.encodePacked(remoteAddress, localAddress)
    // this function set the trusted path for the cross-chain communication
    function setTrustedRemote(uint16 _remoteChainId, bytes calldata _path) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = _path;
        emit SetTrustedRemote(_remoteChainId, _path);
    }
    function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
        emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
    }
    function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
        bytes memory path = trustedRemoteLookup[_remoteChainId];
        require(path.length != 0, "LzApp: no trusted path record");
        return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
    }
    function setPrecrime(address _precrime) external onlyOwner {
        precrime = _precrime;
        emit SetPrecrime(_precrime);
    }
    function setMinDstGas(uint16 _dstChainId, uint16 _packetType, uint _minGas) external onlyOwner {
        require(_minGas > 0, "LzApp: invalid minGas");
        minDstGasLookup[_dstChainId][_packetType] = _minGas;
        emit SetMinDstGas(_dstChainId, _packetType, _minGas);
    }
    // if the size is 0, it means default size limit
    function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
        payloadSizeLimitLookup[_dstChainId] = _size;
    }
    //--------------------------- VIEW FUNCTION ----------------------------------------
    function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
        bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
        return keccak256(trustedSource) == keccak256(_srcAddress);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
import {Minter} from "./token/Minter.sol";
import {Stone} from "./token/Stone.sol";
import {AssetsVault} from "./AssetsVault.sol";
import {StrategyController} from "./strategies/StrategyController.sol";
import {VaultMath} from "./libraries/VaultMath.sol";
contract StoneVault is ReentrancyGuard, Ownable {
    uint256 internal constant MULTIPLIER = 1e18;
    uint256 internal constant ONE_HUNDRED_PERCENT = 1e6;
    uint256 internal constant MAXMIUM_FEE_RATE = ONE_HUNDRED_PERCENT / 100; // 1%
    uint256 internal constant MINIMUM_REBASE_INTERVAL = 7 * 24 * 60 * 60;
    uint256 public constant VERSION = 1;
    uint256 public rebaseTimeInterval = 24 * 60 * 60;
    address public immutable minter;
    address public immutable stone;
    address payable public immutable strategyController;
    address payable public immutable assetsVault;
    address public proposal;
    address public feeRecipient;
    uint256 public latestRoundID;
    uint256 public withdrawableAmountInPast;
    uint256 public withdrawingSharesInPast;
    uint256 public withdrawingSharesInRound;
    uint256 public withdrawFeeRate;
    uint256 public rebaseTime;
    mapping(uint256 => uint256) public roundPricePerShare;
    mapping(uint256 => uint256) public settlementTime;
    mapping(address => UserReceipt) public userReceipts;
    struct UserReceipt {
        uint256 withdrawRound;
        uint256 withdrawShares;
        uint256 withdrawableAmount;
    }
    event Deposit(
        address indexed account,
        uint256 amount,
        uint256 mint,
        uint256 round
    );
    event InitiateWithdraw(
        address indexed account,
        uint256 shares,
        uint256 round
    );
    event CancelWithdraw(
        address indexed account,
        uint256 amount,
        uint256 round
    );
    event Withdrawn(address indexed account, uint256 amount, uint256 round);
    event WithdrawnFromStrategy(
        address indexed account,
        uint256 amount,
        uint256 actualAmount,
        uint256 round
    );
    event RollToNextRound(
        uint256 round,
        uint256 vaultIn,
        uint256 vaultOut,
        uint256 sharePrice
    );
    event StragetyAdded(address strategy);
    event StragetyDestroyed(address strategy);
    event StragetyCleared(address strategy);
    event PortfolioConfigUpdated(address[] strategies, uint256[] ratios);
    event FeeCharged(address indexed account, uint256 amount);
    event SetWithdrawFeeRate(uint256 oldRate, uint256 newRate);
    event SetFeeRecipient(address oldAddr, address newAddr);
    event SetRebaseInterval(uint256 interval);
    modifier onlyProposal() {
        require(proposal == msg.sender, "not proposal");
        _;
    }
    constructor(
        address _minter,
        address _proposal,
        address payable _assetsVault,
        address[] memory _strategies,
        uint256[] memory _ratios
    ) {
        require(
            _minter != address(0) &&
                _proposal != address(0) &&
                _assetsVault != address(0),
            "ZERO ADDRESS"
        );
        uint256 length = _strategies.length;
        for (uint256 i; i < length; i++) {
            require(_strategies[i] != address(0), "ZERO ADDRESS");
        }
        minter = _minter;
        proposal = _proposal;
        assetsVault = _assetsVault;
        feeRecipient = msg.sender;
        StrategyController controller = new StrategyController(
            _assetsVault,
            _strategies,
            _ratios
        );
        strategyController = payable(address(controller));
        stone = Minter(_minter).stone();
        roundPricePerShare[0] = MULTIPLIER;
        latestRoundID = 0;
    }
    function deposit()
        external
        payable
        nonReentrant
        returns (uint256 mintAmount)
    {
        mintAmount = _depositFor(msg.value, msg.sender);
    }
    function depositFor(
        address _user
    ) external payable nonReentrant returns (uint256 mintAmount) {
        mintAmount = _depositFor(msg.value, _user);
    }
    function _depositFor(
        uint256 _amount,
        address _user
    ) internal returns (uint256 mintAmount) {
        require(_amount != 0, "too small");
        uint256 sharePrice;
        uint256 currSharePrice = currentSharePrice();
        if (latestRoundID == 0) {
            sharePrice = MULTIPLIER;
        } else {
            uint256 latestSharePrice = roundPricePerShare[latestRoundID - 1];
            sharePrice = latestSharePrice > currSharePrice
                ? latestSharePrice
                : currSharePrice;
        }
        mintAmount = (_amount * MULTIPLIER) / sharePrice;
        AssetsVault(assetsVault).deposit{value: address(this).balance}();
        Minter(minter).mint(_user, mintAmount);
        emit Deposit(_user, _amount, mintAmount, latestRoundID);
    }
    function requestWithdraw(uint256 _shares) external nonReentrant {
        require(_shares != 0, "too small");
        require(latestRoundID != 0, "should withdraw instantly");
        Stone stoneToken = Stone(stone);
        Minter stoneMinter = Minter(minter);
        require(stoneToken.balanceOf(msg.sender) >= _shares, "exceed balance");
        TransferHelper.safeTransferFrom(
            stone,
            msg.sender,
            address(this),
            _shares
        );
        withdrawingSharesInRound = withdrawingSharesInRound + _shares;
        UserReceipt storage receipt = userReceipts[msg.sender];
        if (receipt.withdrawRound == latestRoundID) {
            receipt.withdrawShares = receipt.withdrawShares + _shares;
        } else if (receipt.withdrawRound == 0) {
            receipt.withdrawShares = _shares;
            receipt.withdrawRound = latestRoundID;
        } else {
            // Withdraw previous round share first
            uint256 withdrawAmount = VaultMath.sharesToAsset(
                receipt.withdrawShares,
                roundPricePerShare[receipt.withdrawRound]
            );
            stoneMinter.burn(address(this), receipt.withdrawShares);
            withdrawingSharesInPast =
                withdrawingSharesInPast -
                receipt.withdrawShares;
            receipt.withdrawShares = _shares;
            receipt.withdrawableAmount =
                receipt.withdrawableAmount +
                withdrawAmount;
            receipt.withdrawRound = latestRoundID;
        }
        emit InitiateWithdraw(msg.sender, _shares, latestRoundID);
    }
    function cancelWithdraw(uint256 _shares) external nonReentrant {
        require(_shares != 0, "too small");
        UserReceipt storage receipt = userReceipts[msg.sender];
        require(receipt.withdrawRound == latestRoundID, "no pending withdraw");
        require(receipt.withdrawShares >= _shares, "exceed pending withdraw");
        receipt.withdrawShares = receipt.withdrawShares - _shares;
        TransferHelper.safeTransfer(stone, msg.sender, _shares);
        if (receipt.withdrawShares == 0) {
            receipt.withdrawRound = 0;
        }
        withdrawingSharesInRound = withdrawingSharesInRound - _shares;
        emit CancelWithdraw(msg.sender, _shares, latestRoundID);
    }
    function instantWithdraw(
        uint256 _amount,
        uint256 _shares
    ) external nonReentrant returns (uint256 actualWithdrawn) {
        require(_amount != 0 || _shares != 0, "too small");
        AssetsVault aVault = AssetsVault(assetsVault);
        Minter stoneMinter = Minter(minter);
        (uint256 idleAmount, ) = getVaultAvailableAmount();
        if (_amount != 0) {
            UserReceipt storage receipt = userReceipts[msg.sender];
            if (
                receipt.withdrawRound != latestRoundID &&
                receipt.withdrawRound != 0
            ) {
                // Withdraw previous round share first
                uint256 withdrawAmount = VaultMath.sharesToAsset(
                    receipt.withdrawShares,
                    roundPricePerShare[receipt.withdrawRound]
                );
                stoneMinter.burn(address(this), receipt.withdrawShares);
                withdrawingSharesInPast =
                    withdrawingSharesInPast -
                    receipt.withdrawShares;
                receipt.withdrawShares = 0;
                receipt.withdrawableAmount =
                    receipt.withdrawableAmount +
                    withdrawAmount;
                receipt.withdrawRound = 0;
            }
            require(
                receipt.withdrawableAmount >= _amount,
                "exceed withdrawable"
            );
            receipt.withdrawableAmount = receipt.withdrawableAmount - _amount;
            withdrawableAmountInPast = withdrawableAmountInPast - _amount;
            actualWithdrawn = _amount;
            emit Withdrawn(msg.sender, _amount, latestRoundID);
        }
        if (_shares != 0) {
            uint256 sharePrice;
            if (latestRoundID == 0) {
                sharePrice = MULTIPLIER;
            } else {
                uint256 currSharePrice = currentSharePrice();
                uint256 latestSharePrice = roundPricePerShare[
                    latestRoundID - 1
                ];
                sharePrice = latestSharePrice < currSharePrice
                    ? latestSharePrice
                    : currSharePrice;
            }
            uint256 ethAmount = VaultMath.sharesToAsset(_shares, sharePrice);
            stoneMinter.burn(msg.sender, _shares);
            if (ethAmount <= idleAmount) {
                actualWithdrawn = actualWithdrawn + ethAmount;
                emit Withdrawn(msg.sender, ethAmount, latestRoundID);
            } else {
                actualWithdrawn = actualWithdrawn + idleAmount;
                ethAmount = ethAmount - idleAmount;
                StrategyController controller = StrategyController(
                    strategyController
                );
                uint256 actualAmount = controller.forceWithdraw(ethAmount);
                actualWithdrawn = actualWithdrawn + actualAmount;
                emit WithdrawnFromStrategy(
                    msg.sender,
                    ethAmount,
                    actualAmount,
                    latestRoundID
                );
            }
        }
        require(aVault.getBalance() >= actualWithdrawn, "still need wait");
        uint256 withFee;
        if (withdrawFeeRate != 0) {
            withFee = (actualWithdrawn * withdrawFeeRate) / ONE_HUNDRED_PERCENT;
            aVault.withdraw(feeRecipient, withFee);
            emit FeeCharged(msg.sender, withFee);
        }
        aVault.withdraw(msg.sender, actualWithdrawn - withFee);
    }
    function rollToNextRound() external {
        require(
            block.timestamp > rebaseTime + rebaseTimeInterval,
            "already rebased"
        );
        StrategyController controller = StrategyController(strategyController);
        AssetsVault aVault = AssetsVault(assetsVault);
        uint256 previewSharePrice = currentSharePrice();
        uint256 vaultBalance = aVault.getBalance();
        uint256 amountToWithdraw = VaultMath.sharesToAsset(
            withdrawingSharesInRound,
            previewSharePrice
        );
        uint256 amountVaultNeed = withdrawableAmountInPast + amountToWithdraw;
        uint256 allPendingValue = controller.getAllStrategyPendingValue();
        uint256 vaultIn;
        uint256 vaultOut;
        if (vaultBalance > amountVaultNeed) {
            vaultIn = vaultBalance - amountVaultNeed;
        } else if (vaultBalance + allPendingValue < amountVaultNeed) {
            vaultOut = amountVaultNeed - vaultBalance - allPendingValue;
        }
        controller.rebaseStrategies(vaultIn, vaultOut);
        uint256 newSharePrice = currentSharePrice();
        roundPricePerShare[latestRoundID] = previewSharePrice < newSharePrice
            ? previewSharePrice
            : newSharePrice;
        settlementTime[latestRoundID] = block.timestamp;
        latestRoundID = latestRoundID + 1;
        withdrawingSharesInPast =
            withdrawingSharesInPast +
            withdrawingSharesInRound;
        withdrawableAmountInPast =
            withdrawableAmountInPast +
            VaultMath.sharesToAsset(withdrawingSharesInRound, newSharePrice);
        withdrawingSharesInRound = 0;
        rebaseTime = block.timestamp;
        emit RollToNextRound(latestRoundID, vaultIn, vaultOut, newSharePrice);
    }
    function addStrategy(address _strategy) external onlyProposal {
        StrategyController controller = StrategyController(strategyController);
        controller.addStrategy(_strategy);
        emit StragetyAdded(_strategy);
    }
    function destroyStrategy(address _strategy) external onlyOwner {
        StrategyController controller = StrategyController(strategyController);
        controller.destroyStrategy(_strategy);
        emit StragetyDestroyed(_strategy);
    }
    function clearStrategy(address _strategy) external onlyOwner {
        StrategyController controller = StrategyController(strategyController);
        controller.clearStrategy(_strategy);
        emit StragetyCleared(_strategy);
    }
    function updatePortfolioConfig(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) external onlyProposal {
        StrategyController controller = StrategyController(strategyController);
        controller.setStrategies(_strategies, _ratios);
        emit PortfolioConfigUpdated(_strategies, _ratios);
    }
    function updateProposal(address _proposal) external onlyProposal {
        proposal = _proposal;
    }
    function migrateVault(address _vault) external onlyProposal {
        Minter(minter).setNewVault(_vault);
        AssetsVault(assetsVault).setNewVault(_vault);
        StrategyController(strategyController).setNewVault(_vault);
    }
    function currentSharePrice() public returns (uint256 price) {
        Stone stoneToken = Stone(stone);
        uint256 totalStone = stoneToken.totalSupply();
        if (
            latestRoundID == 0 ||
            totalStone == 0 ||
            totalStone == withdrawingSharesInPast
        ) {
            return MULTIPLIER;
        }
        uint256 etherAmount = AssetsVault(assetsVault).getBalance() +
            StrategyController(strategyController).getAllStrategiesValue() -
            withdrawableAmountInPast;
        uint256 activeShare = totalStone - withdrawingSharesInPast;
        return (etherAmount * MULTIPLIER) / activeShare;
    }
    function getVaultAvailableAmount()
        public
        returns (uint256 idleAmount, uint256 investedAmount)
    {
        AssetsVault vault = AssetsVault(assetsVault);
        if (vault.getBalance() > withdrawableAmountInPast) {
            idleAmount = vault.getBalance() - withdrawableAmountInPast;
        }
        investedAmount = StrategyController(strategyController)
            .getAllStrategyValidValue();
    }
    function setWithdrawFeeRate(uint256 _withdrawFeeRate) external onlyOwner {
        require(_withdrawFeeRate <= MAXMIUM_FEE_RATE, "exceed maximum");
        emit SetWithdrawFeeRate(withdrawFeeRate, _withdrawFeeRate);
        withdrawFeeRate = _withdrawFeeRate;
    }
    function setFeeRecipient(address _feeRecipient) external onlyOwner {
        require(_feeRecipient != address(0), "zero address");
        emit SetFeeRecipient(feeRecipient, _feeRecipient);
        feeRecipient = _feeRecipient;
    }
    function setRebaseInterval(uint256 _interval) external onlyOwner {
        require(_interval <= MINIMUM_REBASE_INTERVAL, "invalid");
        rebaseTimeInterval = _interval;
        emit SetRebaseInterval(rebaseTimeInterval);
    }
    receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import "@layerzerolabs/solidity-examples/contracts/token/oft/extension/BasedOFT.sol";
import {Minter} from "./Minter.sol";
contract Stone is BasedOFT {
    uint256 public constant DAY_INTERVAL = 24 * 60 * 60;
    address public minter;
    uint16 public constant PT_FEED = 1;
    uint16 public constant PT_SET_ENABLE = 2;
    uint16 public constant PT_SET_CAP = 3;
    uint256 public cap;
    bool public enable = true;
    mapping(uint256 => uint256) public quota;
    event FeedToChain(
        uint16 indexed dstChainId,
        address indexed from,
        bytes toAddress,
        uint price
    );
    event SetCapFor(uint16 indexed dstChainId, bytes toAddress, uint cap);
    event SetEnableFor(uint16 indexed dstChainId, bytes toAddress, bool flag);
    constructor(
        address _minter,
        address _layerZeroEndpoint,
        uint256 _cap
    ) BasedOFT("StakeStone Ether", "STONE", _layerZeroEndpoint) {
        minter = _minter;
        cap = _cap;
    }
    modifier onlyMinter() {
        require(msg.sender == minter, "NM");
        _;
    }
    function mint(address _to, uint256 _amount) external onlyMinter {
        _mint(_to, _amount);
    }
    function burn(address _from, uint256 _amount) external onlyMinter {
        _burn(_from, _amount);
    }
    function sendFrom(
        address _from,
        uint16 _dstChainId,
        bytes calldata _toAddress,
        uint _amount,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes calldata _adapterParams
    ) public payable override(IOFTCore, OFTCore) {
        require(enable, "invalid");
        uint256 id;
        assembly {
            id := chainid()
        }
        require(id != _dstChainId, "same chain");
        uint256 day = block.timestamp / DAY_INTERVAL;
        require(_amount + quota[day] <= cap, "Exceed cap");
        quota[day] = quota[day] + _amount;
        super.sendFrom(
            _from,
            _dstChainId,
            _toAddress,
            _amount,
            _refundAddress,
            _zroPaymentAddress,
            _adapterParams
        );
    }
    function updatePrice(
        uint16 _dstChainId,
        bytes memory _toAddress
    ) external payable returns (uint256 price) {
        require(enable, "invalid");
        uint256 id;
        assembly {
            id := chainid()
        }
        require(id != _dstChainId, "same chain");
        price = tokenPrice();
        bytes memory lzPayload = abi.encode(
            PT_FEED,
            _toAddress,
            price,
            block.timestamp
        );
        _lzSend(
            _dstChainId,
            lzPayload,
            payable(msg.sender),
            address(0),
            bytes(""),
            msg.value
        );
        emit FeedToChain(_dstChainId, msg.sender, _toAddress, price);
    }
    function setEnableFor(
        uint16 _dstChainId,
        bool _flag,
        bytes memory _toAddress
    ) external payable onlyOwner {
        uint256 id;
        assembly {
            id := chainid()
        }
        if (_dstChainId == id) {
            enable = _flag;
            emit SetEnableFor(
                _dstChainId,
                abi.encodePacked(address(this)),
                enable
            );
            return;
        }
        bytes memory lzPayload = abi.encode(PT_SET_ENABLE, _toAddress, _flag);
        _lzSend(
            _dstChainId,
            lzPayload,
            payable(msg.sender),
            address(0),
            bytes(""),
            msg.value
        );
        emit SetEnableFor(_dstChainId, _toAddress, _flag);
    }
    function setCapFor(
        uint16 _dstChainId,
        uint256 _cap,
        bytes memory _toAddress
    ) external payable onlyOwner {
        uint256 id;
        assembly {
            id := chainid()
        }
        if (_dstChainId == id) {
            cap = _cap;
            emit SetCapFor(_dstChainId, abi.encodePacked(address(this)), cap);
            return;
        }
        bytes memory lzPayload = abi.encode(PT_SET_CAP, _toAddress, _cap);
        _lzSend(
            _dstChainId,
            lzPayload,
            payable(msg.sender),
            address(0),
            bytes(""),
            msg.value
        );
        emit SetCapFor(_dstChainId, _toAddress, _cap);
    }
    function tokenPrice() public returns (uint256 price) {
        price = Minter(minter).getTokenPrice();
    }
    function getQuota() external view returns (uint256) {
        uint256 amount = quota[block.timestamp / DAY_INTERVAL];
        if (cap > amount && enable) {
            return cap - amount;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {Stone} from "./Stone.sol";
import {StoneVault} from "../StoneVault.sol";
contract Minter {
    // TODO: governable upgrade
    address public stone;
    address payable public vault;
    modifier onlyVault() {
        require(msg.sender == vault, "not vault");
        _;
    }
    constructor(address _stone, address payable _vault) {
        stone = _stone;
        vault = _vault;
    }
    function mint(address _to, uint256 _amount) external onlyVault {
        Stone(stone).mint(_to, _amount);
    }
    function burn(address _from, uint256 _amount) external onlyVault {
        Stone(stone).burn(_from, _amount);
    }
    function setNewVault(address _vault) external onlyVault {
        vault = payable(_vault);
    }
    function getTokenPrice() public returns (uint256 price) {
        price = StoneVault(vault).currentSharePrice();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
import {Strategy} from "./Strategy.sol";
import {AssetsVault} from "../AssetsVault.sol";
contract StrategyController {
    using EnumerableSet for EnumerableSet.AddressSet;
    uint256 internal constant ONE_HUNDRED_PERCENT = 1e6;
    address public stoneVault;
    address payable public immutable assetsVault;
    EnumerableSet.AddressSet private strategies;
    mapping(address => uint256) public ratios;
    struct StrategyDiff {
        address strategy;
        bool isDeposit;
        uint256 amount;
    }
    modifier onlyVault() {
        require(stoneVault == msg.sender, "not vault");
        _;
    }
    constructor(
        address payable _assetsVault,
        address[] memory _strategies,
        uint256[] memory _ratios
    ) {
        require(_assetsVault != address(0), "ZERO ADDRESS");
        uint256 length = _strategies.length;
        for (uint256 i; i < length; i++) {
            require(_strategies[i] != address(0), "ZERO ADDRESS");
        }
        stoneVault = msg.sender;
        assetsVault = _assetsVault;
        _initStrategies(_strategies, _ratios);
    }
    function onlyRebaseStrategies() external {
        _rebase(0, 0);
    }
    function forceWithdraw(
        uint256 _amount
    ) external onlyVault returns (uint256 actualAmount) {
        uint256 balanceBeforeRepay = address(this).balance;
        if (balanceBeforeRepay >= _amount) {
            _repayToVault();
            actualAmount = balanceBeforeRepay;
        } else {
            actualAmount =
                _forceWithdraw(_amount - balanceBeforeRepay) +
                balanceBeforeRepay;
        }
    }
    function setStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) external onlyVault {
        _setStrategies(_strategies, _ratios);
    }
    function addStrategy(address _strategy) external onlyVault {
        require(!strategies.contains(_strategy), "already exist");
        strategies.add(_strategy);
    }
    function rebaseStrategies(
        uint256 _in,
        uint256 _out
    ) external payable onlyVault {
        _rebase(_in, _out);
    }
    function destroyStrategy(address _strategy) external onlyVault {
        _destoryStrategy(_strategy);
    }
    function _rebase(uint256 _in, uint256 _out) internal {
        require(_in == 0 || _out == 0, "only deposit or withdraw");
        if (_in != 0) {
            AssetsVault(assetsVault).withdraw(address(this), _in);
        }
        uint256 total = getAllStrategyValidValue();
        if (total < _out) {
            total = 0;
        } else {
            total = total + _in - _out;
        }
        uint256 length = strategies.length();
        StrategyDiff[] memory diffs = new StrategyDiff[](length);
        uint256 head;
        uint256 tail = length - 1;
        for (uint i; i < length; i++) {
            address strategy = strategies.at(i);
            if (ratios[strategy] == 0) {
                _clearStrategy(strategy, true);
                continue;
            }
            uint256 newPosition = (total * ratios[strategy]) /
                ONE_HUNDRED_PERCENT;
            uint256 position = getStrategyValidValue(strategy);
            if (newPosition < position) {
                diffs[head] = StrategyDiff(
                    strategy,
                    false,
                    position - newPosition
                );
                head++;
            } else if (newPosition > position) {
                diffs[tail] = StrategyDiff(
                    strategy,
                    true,
                    newPosition - position
                );
                if (tail != 0) {
                    tail--;
                }
            }
        }
        length = diffs.length;
        for (uint256 i; i < length; i++) {
            StrategyDiff memory diff = diffs[i];
            if (diff.amount == 0) {
                continue;
            }
            if (diff.isDeposit) {
                if (address(this).balance < diff.amount) {
                    diff.amount = address(this).balance;
                }
                _depositToStrategy(diff.strategy, diff.amount);
            } else {
                _withdrawFromStrategy(diff.strategy, diff.amount);
            }
        }
        _repayToVault();
    }
    function _repayToVault() internal {
        if (address(this).balance != 0) {
            TransferHelper.safeTransferETH(assetsVault, address(this).balance);
        }
    }
    function _depositToStrategy(address _strategy, uint256 _amount) internal {
        Strategy(_strategy).deposit{value: _amount}();
    }
    function _withdrawFromStrategy(
        address _strategy,
        uint256 _amount
    ) internal {
        Strategy(_strategy).withdraw(_amount);
    }
    function _forceWithdraw(
        uint256 _amount
    ) internal returns (uint256 actualAmount) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            address strategy = strategies.at(i);
            uint256 withAmount = (_amount * ratios[strategy]) /
                ONE_HUNDRED_PERCENT;
            if (withAmount != 0) {
                actualAmount =
                    Strategy(strategy).instantWithdraw(withAmount) +
                    actualAmount;
            }
        }
        _repayToVault();
    }
    function getStrategyValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getAllValue();
    }
    function getStrategyValidValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getInvestedValue();
    }
    function getStrategyPendingValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getPendingValue();
    }
    function getAllStrategiesValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyValue(strategies.at(i));
        }
    }
    function getAllStrategyValidValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyValidValue(strategies.at(i));
        }
    }
    function getAllStrategyPendingValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyPendingValue(strategies.at(i));
        }
    }
    function getStrategies()
        public
        view
        returns (address[] memory addrs, uint256[] memory portions)
    {
        uint256 length = strategies.length();
        addrs = new address[](length);
        portions = new uint256[](length);
        for (uint256 i; i < length; i++) {
            address addr = strategies.at(i);
            addrs[i] = addr;
            portions[i] = ratios[addr];
        }
    }
    function _initStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) internal {
        require(_strategies.length == _ratios.length, "invalid length");
        uint256 totalRatio;
        uint256 length = _strategies.length;
        for (uint i; i < length; i++) {
            strategies.add(_strategies[i]);
            ratios[_strategies[i]] = _ratios[i];
            totalRatio = totalRatio + _ratios[i];
        }
        require(totalRatio <= ONE_HUNDRED_PERCENT, "exceed 100%");
    }
    function _setStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) internal {
        uint256 length = _strategies.length;
        require(length == _ratios.length, "invalid length");
        uint256 oldLength = strategies.length();
        for (uint i; i < oldLength; i++) {
            ratios[strategies.at(i)] = 0;
        }
        uint256 totalRatio;
        for (uint i; i < length; i++) {
            require(
                Strategy(_strategies[i]).controller() == address(this),
                "controller mismatch"
            );
            strategies.add(_strategies[i]);
            ratios[_strategies[i]] = _ratios[i];
            totalRatio = totalRatio + _ratios[i];
        }
        require(totalRatio <= ONE_HUNDRED_PERCENT, "exceed 100%");
    }
    function clearStrategy(address _strategy) public onlyVault {
        _clearStrategy(_strategy, false);
    }
    function _clearStrategy(address _strategy, bool _isRebase) internal {
        Strategy(_strategy).clear();
        if (!_isRebase) {
            _repayToVault();
        }
    }
    function _destoryStrategy(address _strategy) internal {
        require(_couldDestroyStrategy(_strategy), "still active");
        strategies.remove(_strategy);
        _repayToVault();
    }
    function _couldDestroyStrategy(
        address _strategy
    ) internal returns (bool status) {
        return
            ratios[_strategy] == 0 && Strategy(_strategy).getAllValue() < 1e4;
    }
    function setNewVault(address _vault) external onlyVault {
        stoneVault = _vault;
    }
    receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {StrategyController} from "../strategies/StrategyController.sol";
abstract contract Strategy {
    address payable public immutable controller;
    address public governance;
    string public name;
    modifier onlyGovernance() {
        require(governance == msg.sender, "not governace");
        _;
    }
    event TransferGovernance(address oldOwner, address newOwner);
    constructor(address payable _controller, string memory _name) {
        require(_controller != address(0), "ZERO ADDRESS");
        governance = msg.sender;
        controller = _controller;
        name = _name;
    }
    modifier onlyController() {
        require(controller == msg.sender, "not controller");
        _;
    }
    function deposit() public payable virtual onlyController {}
    function withdraw(
        uint256 _amount
    ) public virtual onlyController returns (uint256 actualAmount) {}
    function instantWithdraw(
        uint256 _amount
    ) public virtual onlyController returns (uint256 actualAmount) {}
    function clear() public virtual onlyController returns (uint256 amount) {}
    function execPendingRequest(
        uint256 _amount
    ) public virtual returns (uint256 amount) {}
    function getAllValue() public virtual returns (uint256 value) {}
    function getPendingValue() public virtual returns (uint256 value) {}
    function getInvestedValue() public virtual returns (uint256 value) {}
    function checkPendingStatus()
        public
        virtual
        returns (uint256 pending, uint256 executable)
    {}
    function setGovernance(address governance_) external onlyGovernance {
        emit TransferGovernance(governance, governance_);
        governance = governance_;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
library VaultMath {
    uint256 internal constant DECIMALS = 18;
    function assetToShares(
        uint256 _assetAmount,
        uint256 _assetPerShare
    ) internal pure returns (uint256) {
        require(_assetPerShare > 1, "Vault Lib: invalid assetPerShare");
        return (_assetAmount * (10 ** DECIMALS)) / _assetPerShare;
    }
    function sharesToAsset(
        uint256 _shares,
        uint256 _assetPerShare
    ) internal pure returns (uint256) {
        require(_assetPerShare > 1, "Vault Lib: invalid assetPerShare");
        return (_shares * _assetPerShare) / (10 ** DECIMALS);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
contract AssetsVault {
    address public stoneVault;
    address public strategyController;
    modifier onlyPermit() {
        require(
            stoneVault == msg.sender || strategyController == msg.sender,
            "not permit"
        );
        _;
    }
    constructor(address _stoneVault, address _strategyController) {
        require(
            _stoneVault != address(0) && _strategyController != address(0),
            "ZERO ADDRESS"
        );
        stoneVault = _stoneVault;
        strategyController = _strategyController;
    }
    function deposit() external payable {
        require(msg.value != 0, "too small");
    }
    function withdraw(address _to, uint256 _amount) external onlyPermit {
        TransferHelper.safeTransferETH(_to, _amount);
    }
    function setNewVault(address _vault) external onlyPermit {
        stoneVault = _vault;
    }
    function getBalance() external view returns (uint256 amount) {
        amount = address(this).balance;
    }
    receive() external payable {}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
library TransferHelper {
    /// @notice Transfers tokens from the targeted address to the given destination
    /// @notice Errors with 'STF' if transfer fails
    /// @param token The contract address of the token to be transferred
    /// @param from The originating address from which the tokens will be transferred
    /// @param to The destination address of the transfer
    /// @param value The amount to be transferred
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) =
            token.call(abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'STF');
    }
    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Errors with ST if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'ST');
    }
    /// @notice Approves the stipulated contract to spend the given allowance in the given token
    /// @dev Errors with 'SA' if transfer fails
    /// @param token The contract address of the token to be approved
    /// @param to The target of the approval
    /// @param value The amount of the given token the target will be allowed to spend
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'SA');
    }
    /// @notice Transfers ETH to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'STE');
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.
    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];
        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.
            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;
            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];
                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }
            // Delete the slot where the moved value was stored
            set._values.pop();
            // Delete the index for the deleted slot
            delete set._indexes[value];
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }
    // Bytes32Set
    struct Bytes32Set {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // AddressSet
    struct AddressSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // UintSet
    struct UintSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;
    mapping(address => mapping(address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }
        return true;
    }
    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(from, to, amount);
        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }
        emit Transfer(from, to, amount);
        _afterTokenTransfer(from, to, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);
        _afterTokenTransfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }
        emit Transfer(account, address(0), amount);
        _afterTokenTransfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor() {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }
    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }
    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.7.6;
library ExcessivelySafeCall {
    uint256 constant LOW_28_MASK =
    0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := call(
            _gas, // gas
            _target, // recipient
            0, // ether value
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }
    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeStaticCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal view returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := staticcall(
            _gas, // gas
            _target, // recipient
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }
    /**
     * @notice Swaps function selectors in encoded contract calls
     * @dev Allows reuse of encoded calldata for functions with identical
     * argument types but different names. It simply swaps out the first 4 bytes
     * for the new selector. This function modifies memory in place, and should
     * only be used with caution.
     * @param _newSelector The new 4-byte selector
     * @param _buf The encoded contract args
     */
    function swapSelector(bytes4 _newSelector, bytes memory _buf)
    internal
    pure
    {
        require(_buf.length >= 4);
        uint256 _mask = LOW_28_MASK;
        assembly {
        // load the first word of
            let _word := mload(add(_buf, 0x20))
        // mask out the top 4 bytes
        // /x
            _word := and(_word, _mask)
            _word := or(_newSelector, _word)
            mstore(add(_buf, 0x20), _word)
        }
    }
}
// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
    internal
    pure
    returns (bytes memory)
    {
        bytes memory tempBytes;
        assembly {
        // Get a location of some free memory and store it in tempBytes as
        // Solidity does for memory variables.
            tempBytes := mload(0x40)
        // Store the length of the first bytes array at the beginning of
        // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)
        // Maintain a memory counter for the current write location in the
        // temp bytes array by adding the 32 bytes for the array length to
        // the starting location.
            let mc := add(tempBytes, 0x20)
        // Stop copying when the memory counter reaches the length of the
        // first bytes array.
            let end := add(mc, length)
            for {
            // Initialize a copy counter to the start of the _preBytes data,
            // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
            // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
            // Write the _preBytes data into the tempBytes memory 32 bytes
            // at a time.
                mstore(mc, mload(cc))
            }
        // Add the length of _postBytes to the current length of tempBytes
        // and store it as the new length in the first 32 bytes of the
        // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))
        // Move the memory counter back from a multiple of 0x20 to the
        // actual end of the _preBytes data.
            mc := end
        // Stop copying when the memory counter reaches the new combined
        // length of the arrays.
            end := add(mc, length)
            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }
        // Update the free-memory pointer by padding our last write location
        // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
        // next 32 byte block, then round down to the nearest multiple of
        // 32. If the sum of the length of the two arrays is zero then add
        // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
            add(add(end, iszero(add(length, mload(_preBytes)))), 31),
            not(31) // Round down to the nearest 32 bytes.
            ))
        }
        return tempBytes;
    }
    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
        // Read the first 32 bytes of _preBytes storage, which is the length
        // of the array. (We don't need to use the offset into the slot
        // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
        // Arrays of 31 bytes or less have an even value in their slot,
        // while longer arrays have an odd value. The actual length is
        // the slot divided by two for odd values, and the lowest order
        // byte divided by two for even values.
        // If the slot is even, bitwise and the slot with 255 and divide by
        // two to get the length. If the slot is odd, bitwise and the slot
        // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
        // slength can contain both the length and contents of the array
        // if length < 32 bytes so let's prepare for that
        // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
            // Since the new array still fits in the slot, we just need to
            // update the contents of the slot.
            // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                _preBytes.slot,
                // all the modifications to the slot are inside this
                // next block
                add(
                // we can just add to the slot contents because the
                // bytes we want to change are the LSBs
                fslot,
                add(
                mul(
                div(
                // load the bytes from memory
                mload(add(_postBytes, 0x20)),
                // zero all bytes to the right
                exp(0x100, sub(32, mlength))
                ),
                // and now shift left the number of bytes to
                // leave space for the length in the slot
                exp(0x100, sub(32, newlength))
                ),
                // increase length by the double of the memory
                // bytes length
                mul(mlength, 2)
                )
                )
                )
            }
            case 1 {
            // The stored value fits in the slot, but the combined value
            // will exceed it.
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
            // The contents of the _postBytes array start 32 bytes into
            // the structure. Our first read should obtain the `submod`
            // bytes that can fit into the unused space in the last word
            // of the stored array. To get this, we read 32 bytes starting
            // from `submod`, so the data we read overlaps with the array
            // contents by `submod` bytes. Masking the lowest-order
            // `submod` bytes allows us to add that value directly to the
            // stored value.
                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(
                sc,
                add(
                and(
                fslot,
                0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                ),
                and(mload(mc), mask)
                )
                )
                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
            // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
            // Copy over the first `submod` bytes of the new data as in
            // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(sc, add(sload(sc), and(mload(mc), mask)))
                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }
    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
    internal
    pure
    returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");
        bytes memory tempBytes;
        assembly {
            switch iszero(_length)
            case 0 {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
                tempBytes := mload(0x40)
            // The first word of the slice result is potentially a partial
            // word read from the original array. To read it, we calculate
            // the length of that partial word and start copying that many
            // bytes into the array. The first word we copy will start with
            // data we don't care about, but the last `lengthmod` bytes will
            // land at the beginning of the contents of the new array. When
            // we're done copying, we overwrite the full first word with
            // the actual length of the slice.
                let lengthmod := and(_length, 31)
            // The multiplication in the next line is necessary
            // because when slicing multiples of 32 bytes (lengthmod == 0)
            // the following copy loop was copying the origin's length
            // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)
                for {
                // The multiplication in the next line has the same exact purpose
                // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }
                mstore(tempBytes, _length)
            //update free-memory pointer
            //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
            //zero out the 32 bytes slice we are about to return
            //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)
                mstore(0x40, add(tempBytes, 0x20))
            }
        }
        return tempBytes;
    }
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;
        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }
        return tempAddress;
    }
    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }
        return tempUint;
    }
    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }
        return tempUint;
    }
    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }
        return tempUint;
    }
    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }
        return tempUint;
    }
    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }
        return tempUint;
    }
    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }
        return tempUint;
    }
    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }
        return tempUint;
    }
    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;
        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }
        return tempBytes32;
    }
    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;
        assembly {
            let length := mload(_preBytes)
        // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
            // cb is a circuit breaker in the for loop since there's
            //  no said feature for inline assembly loops
            // cb = 1 - don't breaker
            // cb = 0 - break
                let cb := 1
                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)
                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                    // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }
        return success;
    }
    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
    internal
    view
    returns (bool)
    {
        bool success = true;
        assembly {
        // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
        // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
        // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                    // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)
                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                        // unsuccess:
                            success := 0
                        }
                    }
                    default {
                    // cb is a circuit breaker in the for loop since there's
                    //  no said feature for inline assembly loops
                    // cb = 1 - don't breaker
                    // cb = 0 - break
                        let cb := 1
                    // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)
                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                            // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }
        return success;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../OFT.sol";
contract BasedOFT is OFT {
    constructor(string memory _name, string memory _symbol, address _lzEndpoint) OFT(_name, _symbol, _lzEndpoint) {}
    function circulatingSupply() public view virtual override returns (uint) {
        unchecked {
            return totalSupply() - balanceOf(address(this));
        }
    }
    function _debitFrom(address _from, uint16, bytes memory, uint _amount) internal virtual override returns(uint) {
        address spender = _msgSender();
        if (_from != spender) _spendAllowance(_from, spender, _amount);
        _transfer(_from, address(this), _amount);
        return _amount;
    }
    function _creditTo(uint16, address _toAddress, uint _amount) internal virtual override returns(uint) {
        _transfer(address(this), _toAddress, _amount);
        return _amount;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../lzApp/NonblockingLzApp.sol";
import "./IOFTCore.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
abstract contract OFTCore is NonblockingLzApp, ERC165, IOFTCore {
    using BytesLib for bytes;
    uint public constant NO_EXTRA_GAS = 0;
    // packet type
    uint16 public constant PT_SEND = 0;
    bool public useCustomAdapterParams;
    constructor(address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {}
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IOFTCore).interfaceId || super.supportsInterface(interfaceId);
    }
    function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        // mock the payload for sendFrom()
        bytes memory payload = abi.encode(PT_SEND, _toAddress, _amount);
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }
    function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) public payable virtual override {
        _send(_from, _dstChainId, _toAddress, _amount, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    function setUseCustomAdapterParams(bool _useCustomAdapterParams) public virtual onlyOwner {
        useCustomAdapterParams = _useCustomAdapterParams;
        emit SetUseCustomAdapterParams(_useCustomAdapterParams);
    }
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        uint16 packetType;
        assembly {
            packetType := mload(add(_payload, 32))
        }
        if (packetType == PT_SEND) {
            _sendAck(_srcChainId, _srcAddress, _nonce, _payload);
        } else {
            revert("OFTCore: unknown packet type");
        }
    }
    function _send(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) internal virtual {
        _checkAdapterParams(_dstChainId, PT_SEND, _adapterParams, NO_EXTRA_GAS);
        uint amount = _debitFrom(_from, _dstChainId, _toAddress, _amount);
        bytes memory lzPayload = abi.encode(PT_SEND, _toAddress, amount);
        _lzSend(_dstChainId, lzPayload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
        emit SendToChain(_dstChainId, _from, _toAddress, amount);
    }
    function _sendAck(uint16 _srcChainId, bytes memory, uint64, bytes memory _payload) internal virtual {
        (, bytes memory toAddressBytes, uint amount) = abi.decode(_payload, (uint16, bytes, uint));
        address to = toAddressBytes.toAddress(0);
        amount = _creditTo(_srcChainId, to, amount);
        emit ReceiveFromChain(_srcChainId, to, amount);
    }
    function _checkAdapterParams(uint16 _dstChainId, uint16 _pkType, bytes memory _adapterParams, uint _extraGas) internal virtual {
        if (useCustomAdapterParams) {
            _checkGasLimit(_dstChainId, _pkType, _adapterParams, _extraGas);
        } else {
            require(_adapterParams.length == 0, "OFTCore: _adapterParams must be empty.");
        }
    }
    function _debitFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _amount) internal virtual returns(uint);
    function _creditTo(uint16 _srcChainId, address _toAddress, uint _amount) internal virtual returns(uint);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "./IOFT.sol";
import "./OFTCore.sol";
// override decimal() function is needed
contract OFT is OFTCore, ERC20, IOFT {
    constructor(string memory _name, string memory _symbol, address _lzEndpoint) ERC20(_name, _symbol) OFTCore(_lzEndpoint) {}
    function supportsInterface(bytes4 interfaceId) public view virtual override(OFTCore, IERC165) returns (bool) {
        return interfaceId == type(IOFT).interfaceId || interfaceId == type(IERC20).interfaceId || super.supportsInterface(interfaceId);
    }
    function token() public view virtual override returns (address) {
        return address(this);
    }
    function circulatingSupply() public view virtual override returns (uint) {
        return totalSupply();
    }
    function _debitFrom(address _from, uint16, bytes memory, uint _amount) internal virtual override returns(uint) {
        address spender = _msgSender();
        if (_from != spender) _spendAllowance(_from, spender, _amount);
        _burn(_from, _amount);
        return _amount;
    }
    function _creditTo(uint16, address _toAddress, uint _amount) internal virtual override returns(uint) {
        _mint(_toAddress, _amount);
        return _amount;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Interface of the IOFT core standard
 */
interface IOFTCore is IERC165 {
    /**
     * @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
     * _dstChainId - L0 defined chain id to send tokens too
     * _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
     * _amount - amount of the tokens to transfer
     * _useZro - indicates to use zro to pay L0 fees
     * _adapterParam - flexible bytes array to indicate messaging adapter services in L0
     */
    function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
    /**
     * @dev send `_amount` amount of token to (`_dstChainId`, `_toAddress`) from `_from`
     * `_from` the owner of token
     * `_dstChainId` the destination chain identifier
     * `_toAddress` can be any size depending on the `dstChainId`.
     * `_amount` the quantity of tokens in wei
     * `_refundAddress` the address LayerZero refunds if too much message fee is sent
     * `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
     * `_adapterParams` is a flexible bytes array to indicate messaging adapter services
     */
    function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    /**
     * @dev returns the circulating amount of tokens on current chain
     */
    function circulatingSupply() external view returns (uint);
    /**
     * @dev returns the address of the ERC20 token
     */
    function token() external view returns (address);
    /**
     * @dev Emitted when `_amount` tokens are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
     * `_nonce` is the outbound nonce
     */
    event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes _toAddress, uint _amount);
    /**
     * @dev Emitted when `_amount` tokens are received from `_srcChainId` into the `_toAddress` on the local chain.
     * `_nonce` is the inbound nonce.
     */
    event ReceiveFromChain(uint16 indexed _srcChainId, address indexed _to, uint _amount);
    event SetUseCustomAdapterParams(bool _useCustomAdapterParams);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./IOFTCore.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
 * @dev Interface of the OFT standard
 */
interface IOFT is IOFTCore, IERC20 {
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./LzApp.sol";
import "../util/ExcessivelySafeCall.sol";
/*
 * the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
 * this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
 * NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
 */
abstract contract NonblockingLzApp is LzApp {
    using ExcessivelySafeCall for address;
    constructor(address _endpoint) LzApp(_endpoint) {}
    mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;
    event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
    event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);
    // overriding the virtual function in LzReceiver
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload));
        // try-catch all errors/exceptions
        if (!success) {
            _storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
        }
    }
    function _storeFailedMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload, bytes memory _reason) internal virtual {
        failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
        emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
    }
    function nonblockingLzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual {
        // only internal transaction
        require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }
    //@notice override this function
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
    function retryMessage(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public payable virtual {
        // assert there is message to retry
        bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
        require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
        require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
        // clear the stored message
        failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
        // execute the message. revert if it fails again
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
        emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "../interfaces/ILayerZeroReceiver.sol";
import "../interfaces/ILayerZeroUserApplicationConfig.sol";
import "../interfaces/ILayerZeroEndpoint.sol";
import "../util/BytesLib.sol";
/*
 * a generic LzReceiver implementation
 */
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    using BytesLib for bytes;
    // ua can not send payload larger than this by default, but it can be changed by the ua owner
    uint constant public DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;
    ILayerZeroEndpoint public immutable lzEndpoint;
    mapping(uint16 => bytes) public trustedRemoteLookup;
    mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
    mapping(uint16 => uint) public payloadSizeLimitLookup;
    address public precrime;
    event SetPrecrime(address precrime);
    event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
    event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
    event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);
    constructor(address _endpoint) {
        lzEndpoint = ILayerZeroEndpoint(_endpoint);
    }
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual override {
        // lzReceive must be called by the endpoint for security
        require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");
        bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
        // if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
        require(_srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote), "LzApp: invalid source sending contract");
        _blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }
    // abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
    function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams, uint _nativeFee) internal virtual {
        bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
        require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
        _checkPayloadSize(_dstChainId, _payload.length);
        lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    function _checkGasLimit(uint16 _dstChainId, uint16 _type, bytes memory _adapterParams, uint _extraGas) internal view virtual {
        uint providedGasLimit = _getGasLimit(_adapterParams);
        uint minGasLimit = minDstGasLookup[_dstChainId][_type] + _extraGas;
        require(minGasLimit > 0, "LzApp: minGasLimit not set");
        require(providedGasLimit >= minGasLimit, "LzApp: gas limit is too low");
    }
    function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
        require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
        assembly {
            gasLimit := mload(add(_adapterParams, 34))
        }
    }
    function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
        uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
        if (payloadSizeLimit == 0) { // use default if not set
            payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
        }
        require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
    }
    //---------------------------UserApplication config----------------------------------------
    function getConfig(uint16 _version, uint16 _chainId, address, uint _configType) external view returns (bytes memory) {
        return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
    }
    // generic config for LayerZero user Application
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override onlyOwner {
        lzEndpoint.setConfig(_version, _chainId, _configType, _config);
    }
    function setSendVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setSendVersion(_version);
    }
    function setReceiveVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setReceiveVersion(_version);
    }
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }
    // _path = abi.encodePacked(remoteAddress, localAddress)
    // this function set the trusted path for the cross-chain communication
    function setTrustedRemote(uint16 _remoteChainId, bytes calldata _path) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = _path;
        emit SetTrustedRemote(_remoteChainId, _path);
    }
    function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
        emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
    }
    function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
        bytes memory path = trustedRemoteLookup[_remoteChainId];
        require(path.length != 0, "LzApp: no trusted path record");
        return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
    }
    function setPrecrime(address _precrime) external onlyOwner {
        precrime = _precrime;
        emit SetPrecrime(_precrime);
    }
    function setMinDstGas(uint16 _dstChainId, uint16 _packetType, uint _minGas) external onlyOwner {
        require(_minGas > 0, "LzApp: invalid minGas");
        minDstGasLookup[_dstChainId][_packetType] = _minGas;
        emit SetMinDstGas(_dstChainId, _packetType, _minGas);
    }
    // if the size is 0, it means default size limit
    function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
        payloadSizeLimitLookup[_dstChainId] = _size;
    }
    //--------------------------- VIEW FUNCTION ----------------------------------------
    function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
        bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
        return keccak256(trustedSource) == keccak256(_srcAddress);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 * 
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 * 
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal virtual view returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () payable external {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () payable external {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     * 
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./Proxy.sol";
import "../utils/Address.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 * 
 * Upgradeability is only provided internally through {_upgradeTo}. For an externally upgradeable proxy see
 * {TransparentUpgradeableProxy}.
 */
contract UpgradeableProxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     * 
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if(_data.length > 0) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success,) = _logic.delegatecall(_data);
            require(success);
        }
    }
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal override view returns (address impl) {
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            impl := sload(slot)
        }
    }
    /**
     * @dev Upgrades the proxy to a new implementation.
     * 
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newImplementation)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../openzeppelin/proxy/UpgradeableProxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative inerface of your proxy.
 */
contract OptimizedTransparentUpgradeableProxy is UpgradeableProxy {
    address internal immutable _ADMIN;
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
     */
    constructor(
        address initialLogic,
        address initialAdmin,
        bytes memory _data
    ) payable UpgradeableProxy(initialLogic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        bytes32 slot = _ADMIN_SLOT;
        _ADMIN = initialAdmin;
        // still store it to work with EIP-1967
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, initialAdmin)
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _admin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address) {
        return _admin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address) {
        return _implementation();
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeTo(newImplementation);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeTo(newImplementation);
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = newImplementation.delegatecall(data);
        require(success);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view returns (address adm) {
        return _ADMIN;
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}

{"Address.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize, which returns 0 for contracts in\n        // construction, since the code is only stored at the end of the\n        // constructor execution.\n\n        uint256 size;\n        // solhint-disable-next-line no-inline-assembly\n        assembly { size := extcodesize(account) }\n        return size \u003e 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity\u0027s `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance \u003e= amount, \"Address: insufficient balance\");\n\n        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value\n        (bool success, ) = recipient.call{ value: amount }(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain`call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n      return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {\n        require(address(this).balance \u003e= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.call{ value: value }(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        require(isContract(target), \"Address: delegate call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length \u003e 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n\n                // solhint-disable-next-line no-inline-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"},"Buffer.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\n// https://github.com/ensdomains/buffer\n\npragma solidity ^0.7.0;\n\n/**\n * @dev A library for working with mutable byte buffers in Solidity.\n *\n * Byte buffers are mutable and expandable, and provide a variety of primitives\n * for writing to them. At any time you can fetch a bytes object containing the\n * current contents of the buffer. The bytes object should not be stored between\n * operations, as it may change due to resizing of the buffer.\n */\nlibrary Buffer {\n    /**\n     * @dev Represents a mutable buffer. Buffers have a current value (buf) and\n     *      a capacity. The capacity may be longer than the current value, in\n     *      which case it can be extended without the need to allocate more memory.\n     */\n    struct buffer {\n        bytes buf;\n        uint capacity;\n    }\n\n    /**\n     * @dev Initializes a buffer with an initial capacity.a co\n     * @param buf The buffer to initialize.\n     * @param capacity The number of bytes of space to allocate the buffer.\n     * @return The buffer, for chaining.\n     */\n    function init(buffer memory buf, uint capacity) internal pure returns (buffer memory) {\n        if (capacity % 32 != 0) {\n            capacity += 32 - (capacity % 32);\n        }\n        // Allocate space for the buffer data\n        buf.capacity = capacity;\n        assembly {\n            let ptr := mload(0x40)\n            mstore(buf, ptr)\n            mstore(ptr, 0)\n            mstore(0x40, add(32, add(ptr, capacity)))\n        }\n        return buf;\n    }\n\n\n    /**\n     * @dev Writes a byte string to a buffer. Resizes if doing so would exceed\n     *      the capacity of the buffer.\n     * @param buf The buffer to append to.\n     * @param off The start offset to write to.\n     * @param rawData The data to append.\n     * @param len The number of bytes to copy.\n     * @return The original buffer, for chaining.\n     */\n    function writeRawBytes(\n        buffer memory buf,\n        uint off,\n        bytes memory rawData,\n        uint offData,\n        uint len\n    ) internal pure returns (buffer memory) {\n        if (off + len \u003e buf.capacity) {\n            resize(buf, max(buf.capacity, len + off) * 2);\n        }\n\n        uint dest;\n        uint src;\n        assembly {\n            // Memory address of the buffer data\n            let bufptr := mload(buf)\n            // Length of existing buffer data\n            let buflen := mload(bufptr)\n            // Start address = buffer address + offset + sizeof(buffer length)\n            dest := add(add(bufptr, 32), off)\n            // Update buffer length if we\u0027re extending it\n            if gt(add(len, off), buflen) {\n                mstore(bufptr, add(len, off))\n            }\n            src := add(rawData, offData)\n        }\n\n        // Copy word-length chunks while possible\n        for (; len \u003e= 32; len -= 32) {\n            assembly {\n                mstore(dest, mload(src))\n            }\n            dest += 32;\n            src += 32;\n        }\n\n        // Copy remaining bytes\n        uint mask = 256**(32 - len) - 1;\n        assembly {\n            let srcpart := and(mload(src), not(mask))\n            let destpart := and(mload(dest), mask)\n            mstore(dest, or(destpart, srcpart))\n        }\n\n        return buf;\n    }\n\n    /**\n     * @dev Writes a byte string to a buffer. Resizes if doing so would exceed\n     *      the capacity of the buffer.\n     * @param buf The buffer to append to.\n     * @param off The start offset to write to.\n     * @param data The data to append.\n     * @param len The number of bytes to copy.\n     * @return The original buffer, for chaining.\n     */\n    function write(buffer memory buf, uint off, bytes memory data, uint len) internal pure returns (buffer memory) {\n        require(len \u003c= data.length);\n\n        if (off + len \u003e buf.capacity) {\n            resize(buf, max(buf.capacity, len + off) * 2);\n        }\n\n        uint dest;\n        uint src;\n        assembly {\n        // Memory address of the buffer data\n            let bufptr := mload(buf)\n        // Length of existing buffer data\n            let buflen := mload(bufptr)\n        // Start address = buffer address + offset + sizeof(buffer length)\n            dest := add(add(bufptr, 32), off)\n        // Update buffer length if we\u0027re extending it\n            if gt(add(len, off), buflen) {\n                mstore(bufptr, add(len, off))\n            }\n            src := add(data, 32)\n        }\n\n        // Copy word-length chunks while possible\n        for (; len \u003e= 32; len -= 32) {\n            assembly {\n                mstore(dest, mload(src))\n            }\n            dest += 32;\n            src += 32;\n        }\n\n        // Copy remaining bytes\n        uint mask = 256**(32 - len) - 1;\n        assembly {\n            let srcpart := and(mload(src), not(mask))\n            let destpart := and(mload(dest), mask)\n            mstore(dest, or(destpart, srcpart))\n        }\n\n        return buf;\n    }\n\n    function append(buffer memory buf, bytes memory data) internal pure returns (buffer memory) {\n        return write(buf, buf.buf.length, data, data.length);\n    }\n\n    function resize(buffer memory buf, uint capacity) private pure {\n        bytes memory oldbuf = buf.buf;\n        init(buf, capacity);\n        append(buf, oldbuf);\n    }\n\n    function max(uint a, uint b) private pure returns (uint) {\n        if (a \u003e b) {\n            return a;\n        }\n        return b;\n    }\n}\n"},"Context.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity \u003e=0.6.0 \u003c0.8.0;\n\n/*\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with GSN meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address payable) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes memory) {\n        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691\n        return msg.data;\n    }\n}\n"},"IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller\u0027s account to `recipient`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller\u0027s tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender\u0027s allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `sender` to `recipient` using the\n     * allowance mechanism. `amount` is then deducted from the caller\u0027s\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n"},"ILayerZeroEndpoint.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\nimport \"./ILayerZeroUserApplicationConfig.sol\";\n\ninterface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {\n    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.\n    // @param _dstChainId - the destination chain identifier\n    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains\n    // @param _payload - a custom bytes payload to send to the destination contract\n    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address\n    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction\n    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination\n    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;\n\n    // @notice used by the messaging library to publish verified payload\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source contract (as bytes) at the source chain\n    // @param _dstAddress - the address on destination chain\n    // @param _nonce - the unbound message ordering nonce\n    // @param _gasLimit - the gas limit for external contract execution\n    // @param _payload - verified payload to send to the destination contract\n    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;\n\n    // @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source chain contract address\n    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);\n\n    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM\n    // @param _srcAddress - the source chain contract address\n    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);\n\n    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery\n    // @param _dstChainId - the destination chain identifier\n    // @param _userApplication - the user app address on this EVM chain\n    // @param _payload - the custom message to send over LayerZero\n    // @param _payInZRO - if false, user app pays the protocol fee in native token\n    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain\n    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);\n\n    // @notice get this Endpoint\u0027s immutable source identifier\n    function getChainId() external view returns (uint16);\n\n    // @notice the interface to retry failed message on this Endpoint destination\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source chain contract address\n    // @param _payload - the payload to be retried\n    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;\n\n    // @notice query if any STORED payload (message blocking) at the endpoint.\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source chain contract address\n    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);\n\n    // @notice query if the _libraryAddress is valid for sending msgs.\n    // @param _userApplication - the user app address on this EVM chain\n    function getSendLibraryAddress(address _userApplication) external view returns (address);\n\n    // @notice query if the _libraryAddress is valid for receiving msgs.\n    // @param _userApplication - the user app address on this EVM chain\n    function getReceiveLibraryAddress(address _userApplication) external view returns (address);\n\n    // @notice query if the non-reentrancy guard for send() is on\n    // @return true if the guard is on. false otherwise\n    function isSendingPayload() external view returns (bool);\n\n    // @notice query if the non-reentrancy guard for receive() is on\n    // @return true if the guard is on. false otherwise\n    function isReceivingPayload() external view returns (bool);\n\n    // @notice get the configuration of the LayerZero messaging library of the specified version\n    // @param _version - messaging library version\n    // @param _chainId - the chainId for the pending config change\n    // @param _userApplication - the contract address of the user application\n    // @param _configType - type of configuration. every messaging library has its own convention.\n    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);\n\n    // @notice get the send() LayerZero messaging library version\n    // @param _userApplication - the contract address of the user application\n    function getSendVersion(address _userApplication) external view returns (uint16);\n\n    // @notice get the lzReceive() LayerZero messaging library version\n    // @param _userApplication - the contract address of the user application\n    function getReceiveVersion(address _userApplication) external view returns (uint16);\n}\n"},"ILayerZeroMessagingLibrary.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\nimport \"./ILayerZeroUserApplicationConfig.sol\";\n\ninterface ILayerZeroMessagingLibrary {\n    // send(), messages will be inflight.\n    function send(address _userApplication, uint64 _lastNonce, uint16 _chainId, bytes calldata _destination, bytes calldata _payload, address payable refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;\n\n    // estimate native fee at the send side\n    function estimateFees(uint16 _chainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);\n\n    //---------------------------------------------------------------------------\n    // setConfig / getConfig are User Application (UA) functions to specify Oracle, Relayer, blockConfirmations, libraryVersion\n    function setConfig(uint16 _chainId, address _userApplication, uint _configType, bytes calldata _config) external;\n\n    function getConfig(uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);\n}\n"},"ILayerZeroMessagingLibraryV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\nimport \"./ILayerZeroUserApplicationConfig.sol\";\nimport \"./ILayerZeroMessagingLibrary.sol\";\n\ninterface ILayerZeroMessagingLibraryV2 is ILayerZeroMessagingLibrary {\n    function getOutboundNonce(uint16 _chainId, bytes calldata _path) external view returns (uint64);\n}\n"},"ILayerZeroOracleV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\ninterface ILayerZeroOracleV2 {\n    // @notice query price and assign jobs at the same time\n    // @param _dstChainId - the destination endpoint identifier\n    // @param _outboundProofType - the proof type identifier to specify proof to be relayed\n    // @param _outboundBlockConfirmation - block confirmation delay before relaying blocks\n    // @param _userApplication - the source sending contract address\n    function assignJob(uint16 _dstChainId, uint16 _outboundProofType, uint64 _outboundBlockConfirmation, address _userApplication) external returns (uint price);\n\n    // @notice query the oracle price for relaying block information to the destination chain\n    // @param _dstChainId the destination endpoint identifier\n    // @param _outboundProofType the proof type identifier to specify the data to be relayed\n    // @param _outboundBlockConfirmation - block confirmation delay before relaying blocks\n    // @param _userApplication - the source sending contract address\n    function getFee(uint16 _dstChainId, uint16 _outboundProofType, uint64 _outboundBlockConfirmation, address _userApplication) external view returns (uint price);\n\n    // @notice withdraw the accrued fee in ultra light node\n    // @param _to - the fee receiver\n    // @param _amount - the withdrawal amount\n    function withdrawFee(address payable _to, uint _amount) external;\n}\n"},"ILayerZeroReceiver.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\ninterface ILayerZeroReceiver {\n    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination\n    // @param _srcChainId - the source endpoint identifier\n    // @param _srcAddress - the source sending contract address from the source chain\n    // @param _nonce - the ordered message nonce\n    // @param _payload - the signed payload is the UA bytes has encoded to be sent\n    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;\n}\n"},"ILayerZeroRelayerV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\ninterface ILayerZeroRelayerV2 {\n    // @notice query price and assign jobs at the same time\n    // @param _dstChainId - the destination endpoint identifier\n    // @param _outboundProofType - the proof type identifier to specify proof to be relayed\n    // @param _userApplication - the source sending contract address. relayers may apply price discrimination to user apps\n    // @param _payloadSize - the length of the payload. it is an indicator of gas usage for relaying cross-chain messages\n    // @param _adapterParams - optional parameters for extra service plugins, e.g. sending dust tokens at the destination chain\n    function assignJob(uint16 _dstChainId, uint16 _outboundProofType, address _userApplication, uint _payloadSize, bytes calldata _adapterParams) external returns (uint price);\n\n    // @notice query the relayer price for relaying the payload and its proof to the destination chain\n    // @param _dstChainId - the destination endpoint identifier\n    // @param _outboundProofType - the proof type identifier to specify proof to be relayed\n    // @param _userApplication - the source sending contract address. relayers may apply price discrimination to user apps\n    // @param _payloadSize - the length of the payload. it is an indicator of gas usage for relaying cross-chain messages\n    // @param _adapterParams - optional parameters for extra service plugins, e.g. sending dust tokens at the destination chain\n    function getFee(uint16 _dstChainId, uint16 _outboundProofType, address _userApplication, uint _payloadSize, bytes calldata _adapterParams) external view returns (uint price);\n\n    // @notice withdraw the accrued fee in ultra light node\n    // @param _to - the fee receiver\n    // @param _amount - the withdrawal amount\n    function withdrawFee(address payable _to, uint _amount) external;\n}\n"},"ILayerZeroTreasury.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\ninterface ILayerZeroTreasury {\n    function getFees(bool payInZro, uint relayerFee, uint oracleFee) external view returns (uint);\n}\n"},"ILayerZeroUltraLightNodeV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\npragma abicoder v2;\n\ninterface ILayerZeroUltraLightNodeV2 {\n    // Relayer functions\n    function validateTransactionProof(uint16 _srcChainId, address _dstAddress, uint _gasLimit, bytes32 _lookupHash, bytes32 _blockData, bytes calldata _transactionProof) external;\n\n    // an Oracle delivers the block data using updateHash()\n    function updateHash(uint16 _srcChainId, bytes32 _lookupHash, uint _confirmations, bytes32 _blockData) external;\n\n    // can only withdraw the receivable of the msg.sender\n    function withdrawNative(address payable _to, uint _amount) external;\n\n    function withdrawZRO(address _to, uint _amount) external;\n\n    // view functions\n    function getAppConfig(uint16 _remoteChainId, address _userApplicationAddress) external view returns (ApplicationConfiguration memory);\n\n    function accruedNativeFee(address _address) external view returns (uint);\n\n    struct ApplicationConfiguration {\n        uint16 inboundProofLibraryVersion;\n        uint64 inboundBlockConfirmations;\n        address relayer;\n        uint16 outboundProofType;\n        uint64 outboundBlockConfirmations;\n        address oracle;\n    }\n\n    event HashReceived(uint16 indexed srcChainId, address indexed oracle, bytes32 lookupHash, bytes32 blockData, uint confirmations);\n    event RelayerParams(bytes adapterParams, uint16 outboundProofType);\n    event Packet(bytes payload);\n    event InvalidDst(uint16 indexed srcChainId, bytes srcAddress, address indexed dstAddress, uint64 nonce, bytes32 payloadHash);\n    event PacketReceived(uint16 indexed srcChainId, bytes srcAddress, address indexed dstAddress, uint64 nonce, bytes32 payloadHash);\n    event AppConfigUpdated(address indexed userApplication, uint indexed configType, bytes newConfig);\n    event AddInboundProofLibraryForChain(uint16 indexed chainId, address lib);\n    event EnableSupportedOutboundProof(uint16 indexed chainId, uint16 proofType);\n    event SetChainAddressSize(uint16 indexed chainId, uint size);\n    event SetDefaultConfigForChainId(uint16 indexed chainId, uint16 inboundProofLib, uint64 inboundBlockConfirm, address relayer, uint16 outboundProofType, uint64 outboundBlockConfirm, address oracle);\n    event SetDefaultAdapterParamsForChainId(uint16 indexed chainId, uint16 indexed proofType, bytes adapterParams);\n    event SetLayerZeroToken(address indexed tokenAddress);\n    event SetRemoteUln(uint16 indexed chainId, bytes32 uln);\n    event SetTreasury(address indexed treasuryAddress);\n    event WithdrawZRO(address indexed msgSender, address indexed to, uint amount);\n    event WithdrawNative(address indexed msgSender, address indexed to, uint amount);\n}\n"},"ILayerZeroUserApplicationConfig.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\ninterface ILayerZeroUserApplicationConfig {\n    // @notice set the configuration of the LayerZero messaging library of the specified version\n    // @param _version - messaging library version\n    // @param _chainId - the chainId for the pending config change\n    // @param _configType - type of configuration. every messaging library has its own convention.\n    // @param _config - configuration in the bytes. can encode arbitrary content.\n    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;\n\n    // @notice set the send() LayerZero messaging library version to _version\n    // @param _version - new messaging library version\n    function setSendVersion(uint16 _version) external;\n\n    // @notice set the lzReceive() LayerZero messaging library version to _version\n    // @param _version - new messaging library version\n    function setReceiveVersion(uint16 _version) external;\n\n    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload\n    // @param _srcChainId - the chainId of the source chain\n    // @param _srcAddress - the contract address of the source contract at the source chain\n    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;\n}\n"},"ILayerZeroValidationLibrary.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\npragma abicoder v2;\n\nimport \"./LayerZeroPacket.sol\";\n\ninterface ILayerZeroValidationLibrary {\n    function validateProof(bytes32 blockData, bytes calldata _data, uint _remoteAddressSize) external returns (LayerZeroPacket.Packet memory packet);\n}\n"},"LayerZeroPacket.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\n\nimport \"./Buffer.sol\";\nimport \"./SafeMath.sol\";\n\nlibrary LayerZeroPacket {\n    using Buffer for Buffer.buffer;\n    using SafeMath for uint;\n\n    struct Packet {\n        uint16 srcChainId;\n        uint16 dstChainId;\n        uint64 nonce;\n        address dstAddress;\n        bytes srcAddress;\n        bytes32 ulnAddress;\n        bytes payload;\n    }\n\n    function getPacket(\n        bytes memory data,\n        uint16 srcChain,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        uint16 dstChainId;\n        address dstAddress;\n        uint size;\n        uint64 nonce;\n\n        // The log consists of the destination chain id and then a bytes payload\n        //      0--------------------------------------------31\n        // 0   |  total bytes size\n        // 32  |  destination chain id\n        // 64  |  bytes offset\n        // 96  |  bytes array size\n        // 128 |  payload\n        assembly {\n            dstChainId := mload(add(data, 32))\n            size := mload(add(data, 96)) /// size of the byte array\n            nonce := mload(add(data, 104)) // offset to convert to uint64  128  is index -24\n            dstAddress := mload(add(data, sub(add(128, sizeOfSrcAddress), 4))) // offset to convert to address 12 -8\n        }\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 136, sizeOfSrcAddress); // 128 + 8\n\n        uint payloadSize = size.sub(28).sub(sizeOfSrcAddress);\n        Buffer.buffer memory payloadBuffer;\n        payloadBuffer.init(payloadSize);\n        payloadBuffer.writeRawBytes(0, data, sizeOfSrcAddress.add(156), payloadSize); // 148 + 8\n        return LayerZeroPacket.Packet(srcChain, dstChainId, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n\n    function getPacketV2(\n        bytes memory data,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        // packet def: abi.encodePacked(nonce, srcChain, srcAddress, dstChain, dstAddress, payload);\n        // data def: abi.encode(packet) = offset(32) + length(32) + packet\n        //              if from EVM\n        // 0 - 31       0 - 31          |  total bytes size\n        // 32 - 63      32 - 63         |  location\n        // 64 - 95      64 - 95         |  size of the packet\n        // 96 - 103     96 - 103        |  nonce\n        // 104 - 105    104 - 105       |  srcChainId\n        // 106 - P      106 - 125       |  srcAddress, where P = 106 + sizeOfSrcAddress - 1,\n        // P+1 - P+2    126 - 127       |  dstChainId\n        // P+3 - P+22   128 - 147       |  dstAddress\n        // P+23 - END   148 - END       |  payload\n\n        // decode the packet\n        uint256 realSize;\n        uint64 nonce;\n        uint16 srcChain;\n        uint16 dstChain;\n        address dstAddress;\n        assembly {\n            realSize := mload(add(data, 64))\n            nonce := mload(add(data, 72)) // 104 - 32\n            srcChain := mload(add(data, 74)) // 106 - 32\n            dstChain := mload(add(data, add(76, sizeOfSrcAddress))) // P + 3 - 32 = 105 + size + 3 - 32 = 76 + size\n            dstAddress := mload(add(data, add(96, sizeOfSrcAddress))) // P + 23 - 32 = 105 + size + 23 - 32 = 96 + size\n        }\n\n        require(srcChain != 0, \"LayerZeroPacket: invalid packet\");\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 106, sizeOfSrcAddress);\n\n        uint nonPayloadSize = sizeOfSrcAddress.add(32);// 2 + 2 + 8 + 20, 32 + 20 = 52 if sizeOfSrcAddress == 20\n        uint payloadSize = realSize.sub(nonPayloadSize);\n        Buffer.buffer memory payloadBuffer;\n        payloadBuffer.init(payloadSize);\n        payloadBuffer.writeRawBytes(0, data, nonPayloadSize.add(96), payloadSize);\n\n        return LayerZeroPacket.Packet(srcChain, dstChain, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n\n    function getPacketV3(\n        bytes memory data,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        // data def: abi.encodePacked(nonce, srcChain, srcAddress, dstChain, dstAddress, payload);\n        //              if from EVM\n        // 0 - 31       0 - 31          |  total bytes size\n        // 32 - 39      32 - 39         |  nonce\n        // 40 - 41      40 - 41         |  srcChainId\n        // 42 - P       42 - 61         |  srcAddress, where P = 41 + sizeOfSrcAddress,\n        // P+1 - P+2    62 - 63         |  dstChainId\n        // P+3 - P+22   64 - 83         |  dstAddress\n        // P+23 - END   84 - END        |  payload\n\n        // decode the packet\n        uint256 realSize = data.length;\n        uint nonPayloadSize = sizeOfSrcAddress.add(32);// 2 + 2 + 8 + 20, 32 + 20 = 52 if sizeOfSrcAddress == 20\n        require(realSize \u003e= nonPayloadSize, \"LayerZeroPacket: invalid packet\");\n        uint payloadSize = realSize - nonPayloadSize;\n\n        uint64 nonce;\n        uint16 srcChain;\n        uint16 dstChain;\n        address dstAddress;\n        assembly {\n            nonce := mload(add(data, 8)) // 40 - 32\n            srcChain := mload(add(data, 10)) // 42 - 32\n            dstChain := mload(add(data, add(12, sizeOfSrcAddress))) // P + 3 - 32 = 41 + size + 3 - 32 = 12 + size\n            dstAddress := mload(add(data, add(32, sizeOfSrcAddress))) // P + 23 - 32 = 41 + size + 23 - 32 = 32 + size\n        }\n\n        require(srcChain != 0, \"LayerZeroPacket: invalid packet\");\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 42, sizeOfSrcAddress);\n\n        Buffer.buffer memory payloadBuffer;\n        if (payloadSize \u003e 0) {\n            payloadBuffer.init(payloadSize);\n            payloadBuffer.writeRawBytes(0, data, nonPayloadSize.add(32), payloadSize);\n        }\n\n        return LayerZeroPacket.Packet(srcChain, dstChain, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n}\n"},"NonceContract.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\n\nimport \"./ILayerZeroEndpoint.sol\";\n\ncontract NonceContract {\n    ILayerZeroEndpoint public immutable endpoint;\n    // outboundNonce = [dstChainId][remoteAddress + localAddress]\n    mapping(uint16 =\u003e mapping(bytes =\u003e uint64)) public outboundNonce;\n\n    constructor(address _endpoint) {\n        endpoint = ILayerZeroEndpoint(_endpoint);\n    }\n\n    function increment(uint16 _chainId, address _ua, bytes calldata _path) external returns (uint64) {\n        require(endpoint.getSendLibraryAddress(_ua) == msg.sender, \"NonceContract: msg.sender is not valid sendlibrary\");\n        return ++outboundNonce[_chainId][_path];\n    }\n}\n"},"Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\nimport \"./Context.sol\";\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    constructor () {\n        address msgSender = _msgSender();\n        _owner = msgSender;\n        emit OwnershipTransferred(address(0), msgSender);\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n        _;\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby removing any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        emit OwnershipTransferred(_owner, address(0));\n        _owner = address(0);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        emit OwnershipTransferred(_owner, newOwner);\n        _owner = newOwner;\n    }\n}\n"},"ReentrancyGuard.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot\u0027s contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler\u0027s defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction\u0027s gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant _NOT_ENTERED = 1;\n    uint256 private constant _ENTERED = 2;\n\n    uint256 private _status;\n\n    constructor () {\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and make it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        // On the first call to nonReentrant, _notEntered will be true\n        require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n        // Any calls to nonReentrant after this point will fail\n        _status = _ENTERED;\n\n        _;\n\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = _NOT_ENTERED;\n    }\n}\n"},"SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\nimport \"./IERC20.sol\";\nimport \"./SafeMath.sol\";\nimport \"./Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using SafeMath for uint256;\n    using Address for address;\n\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(IERC20 token, address spender, uint256 value) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // \u0027safeIncreaseAllowance\u0027 and \u0027safeDecreaseAllowance\u0027\n        // solhint-disable-next-line max-line-length\n        require((value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 newAllowance = token.allowance(address(this), spender).add(value);\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 newAllowance = token.allowance(address(this), spender).sub(value, \"SafeERC20: decreased allowance below zero\");\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity\u0027s return data size checking mechanism, since\n        // we\u0027re implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n        if (returndata.length \u003e 0) { // Return data is optional\n            // solhint-disable-next-line max-line-length\n            require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n        }\n    }\n}\n"},"SafeMath.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Wrappers over Solidity\u0027s arithmetic operations with added overflow\n * checks.\n *\n * Arithmetic operations in Solidity wrap on overflow. This can easily result\n * in bugs, because programmers usually assume that an overflow raises an\n * error, which is the standard behavior in high level programming languages.\n * `SafeMath` restores this intuition by reverting the transaction when an\n * operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it\u0027s recommended to use it always.\n */\nlibrary SafeMath {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        uint256 c = a + b;\n        if (c \u003c a) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the substraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b \u003e a) return (false, 0);\n        return (true, a - b);\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        // Gas optimization: this is cheaper than requiring \u0027a\u0027 not being zero, but the\n        // benefit is lost if \u0027b\u0027 is also tested.\n        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n        if (a == 0) return (true, 0);\n        uint256 c = a * b;\n        if (c / a != b) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a / b);\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a % b);\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity\u0027s `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        uint256 c = a + b;\n        require(c \u003e= a, \"SafeMath: addition overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity\u0027s `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003c= a, \"SafeMath: subtraction overflow\");\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity\u0027s `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (a == 0) return 0;\n        uint256 c = a * b;\n        require(c / a == b, \"SafeMath: multiplication overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity\u0027s `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003e 0, \"SafeMath: division by zero\");\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity\u0027s `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003e 0, \"SafeMath: modulo by zero\");\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity\u0027s `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003c= a, errorMessage);\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryDiv}.\n     *\n     * Counterpart to Solidity\u0027s `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003e 0, errorMessage);\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity\u0027s `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003e 0, errorMessage);\n        return a % b;\n    }\n}\n"},"UltraLightNodeV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\npragma abicoder v2;\n\nimport \"./Ownable.sol\";\nimport \"./SafeMath.sol\";\nimport \"./ReentrancyGuard.sol\";\nimport \"./IERC20.sol\";\nimport \"./SafeERC20.sol\";\n\nimport \"./ILayerZeroValidationLibrary.sol\";\nimport \"./ILayerZeroReceiver.sol\";\nimport \"./ILayerZeroTreasury.sol\";\nimport \"./ILayerZeroEndpoint.sol\";\n// v2\nimport \"./ILayerZeroMessagingLibraryV2.sol\";\nimport \"./ILayerZeroOracleV2.sol\";\nimport \"./ILayerZeroUltraLightNodeV2.sol\";\nimport \"./ILayerZeroRelayerV2.sol\";\nimport \"./NonceContract.sol\";\n\ncontract UltraLightNodeV2 is ILayerZeroMessagingLibraryV2, ILayerZeroUltraLightNodeV2, ReentrancyGuard, Ownable {\n    using SafeERC20 for IERC20;\n    using SafeMath for uint;\n\n    // Application config\n    uint public constant CONFIG_TYPE_INBOUND_PROOF_LIBRARY_VERSION = 1;\n    uint public constant CONFIG_TYPE_INBOUND_BLOCK_CONFIRMATIONS = 2;\n    uint public constant CONFIG_TYPE_RELAYER = 3;\n    uint public constant CONFIG_TYPE_OUTBOUND_PROOF_TYPE = 4;\n    uint public constant CONFIG_TYPE_OUTBOUND_BLOCK_CONFIRMATIONS = 5;\n    uint public constant CONFIG_TYPE_ORACLE = 6;\n\n    // Token and Contracts\n    IERC20 public layerZeroToken;\n    ILayerZeroTreasury public treasuryContract;\n\n    mapping(address =\u003e uint) public nativeFees;\n    uint public treasuryZROFees;\n\n    // User Application\n    mapping(address =\u003e mapping(uint16 =\u003e ApplicationConfiguration)) public appConfig; // app address =\u003e chainId =\u003e config\n    mapping(uint16 =\u003e ApplicationConfiguration) public defaultAppConfig; // default UA settings if no version specified\n    mapping(uint16 =\u003e mapping(uint16 =\u003e bytes)) public defaultAdapterParams;\n\n    // Validation\n    mapping(uint16 =\u003e mapping(uint16 =\u003e address)) public inboundProofLibrary; // chainId =\u003e library Id =\u003e inboundProofLibrary contract\n    mapping(uint16 =\u003e uint16) public maxInboundProofLibrary; // chainId =\u003e inboundProofLibrary\n    mapping(uint16 =\u003e mapping(uint16 =\u003e bool)) public supportedOutboundProof; // chainId =\u003e outboundProofType =\u003e enabled\n    mapping(uint16 =\u003e uint) public chainAddressSizeMap;\n    mapping(address =\u003e mapping(uint16 =\u003e mapping(bytes32 =\u003e mapping(bytes32 =\u003e uint)))) public hashLookup; //[oracle][srcChainId][blockhash][datahash] -\u003e confirmation\n    mapping(uint16 =\u003e bytes32) public ulnLookup; // remote ulns\n\n    ILayerZeroEndpoint public immutable endpoint;\n    uint16 public immutable localChainId;\n    NonceContract public immutable nonceContract;\n\n    constructor(address _endpoint, address _nonceContract, uint16 _localChainId) {\n        require(_endpoint != address(0x0), \"LayerZero: endpoint cannot be zero address\");\n        require(_nonceContract != address(0x0), \"LayerZero: nonceContract cannot be zero address\");\n        ILayerZeroEndpoint lzEndpoint = ILayerZeroEndpoint(_endpoint);\n        localChainId = _localChainId;\n        endpoint = lzEndpoint;\n        nonceContract = NonceContract(_nonceContract);\n    }\n\n    // only the endpoint can call SEND() and setConfig()\n    modifier onlyEndpoint() {\n        require(address(endpoint) == msg.sender, \"LayerZero: only endpoint\");\n        _;\n    }\n\n    //----------------------------------------------------------------------------------\n    // PROTOCOL\n    function validateTransactionProof(uint16 _srcChainId, address _dstAddress, uint _gasLimit, bytes32 _lookupHash, bytes32 _blockData, bytes calldata _transactionProof) external override {\n        // retrieve UA\u0027s configuration using the _dstAddress from arguments.\n        ApplicationConfiguration memory uaConfig = _getAppConfig(_srcChainId, _dstAddress);\n\n        // assert that the caller == UA\u0027s relayer\n        require(uaConfig.relayer == msg.sender, \"LayerZero: invalid relayer\");\n\n        LayerZeroPacket.Packet memory _packet;\n        uint remoteAddressSize = chainAddressSizeMap[_srcChainId];\n        require(remoteAddressSize != 0, \"LayerZero: incorrect remote address size\");\n        {\n            // assert that the data submitted by UA\u0027s oracle have no fewer confirmations than UA\u0027s configuration\n            uint storedConfirmations = hashLookup[uaConfig.oracle][_srcChainId][_lookupHash][_blockData];\n            require(storedConfirmations \u003e 0 \u0026\u0026 storedConfirmations \u003e= uaConfig.inboundBlockConfirmations, \"LayerZero: not enough block confirmations\");\n\n            // decode\n            address inboundProofLib = inboundProofLibrary[_srcChainId][uaConfig.inboundProofLibraryVersion];\n            _packet = ILayerZeroValidationLibrary(inboundProofLib).validateProof(_blockData, _transactionProof, remoteAddressSize);\n        }\n\n        // packet content assertion\n        require(ulnLookup[_srcChainId] == _packet.ulnAddress \u0026\u0026 _packet.ulnAddress != bytes32(0), \"LayerZero: invalid _packet.ulnAddress\");\n        require(_packet.srcChainId == _srcChainId, \"LayerZero: invalid srcChain Id\");\n        // failsafe because the remoteAddress size being passed into validateProof trims the address this should not hit\n        require(_packet.srcAddress.length == remoteAddressSize, \"LayerZero: invalid srcAddress size\");\n        require(_packet.dstChainId == localChainId, \"LayerZero: invalid dstChain Id\");\n        require(_packet.dstAddress == _dstAddress, \"LayerZero: invalid dstAddress\");\n\n        // if the dst is not a contract, then emit and return early. This will break inbound nonces, but this particular\n        // path is already broken and wont ever be able to deliver anyways\n        if (!_isContract(_dstAddress)) {\n            emit InvalidDst(_packet.srcChainId, _packet.srcAddress, _packet.dstAddress, _packet.nonce, keccak256(_packet.payload));\n            return;\n        }\n\n        bytes memory pathData = abi.encodePacked(_packet.srcAddress, _packet.dstAddress);\n        emit PacketReceived(_packet.srcChainId, _packet.srcAddress, _packet.dstAddress, _packet.nonce, keccak256(_packet.payload));\n        endpoint.receivePayload(_srcChainId, pathData, _dstAddress, _packet.nonce, _gasLimit, _packet.payload);\n    }\n\n    function send(address _ua, uint64, uint16 _dstChainId, bytes calldata _path, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable override onlyEndpoint {\n        address ua = _ua;\n        uint16 dstChainId = _dstChainId;\n        require(ulnLookup[dstChainId] != bytes32(0), \"LayerZero: dstChainId does not exist\");\n\n        bytes memory dstAddress;\n        uint64 nonce;\n        // code block for solving \u0027Stack Too Deep\u0027\n        {\n            uint chainAddressSize = chainAddressSizeMap[dstChainId];\n            // path = remoteAddress + localAddress\n            require(chainAddressSize != 0 \u0026\u0026 _path.length == 20 + chainAddressSize, \"LayerZero: incorrect remote address size\");\n            address srcInPath;\n            bytes memory path = _path; // copy to memory\n            assembly {\n                srcInPath := mload(add(add(path, 20), chainAddressSize)) // chainAddressSize + 20\n            }\n            require(ua == srcInPath, \"LayerZero: wrong path data\");\n            dstAddress = _path[0:chainAddressSize];\n            nonce = nonceContract.increment(dstChainId, ua, path);\n        }\n\n        bytes memory payload = _payload;\n        ApplicationConfiguration memory uaConfig = _getAppConfig(dstChainId, ua);\n\n        // compute all the fees\n        uint relayerFee = _handleRelayer(dstChainId, uaConfig, ua, payload.length, _adapterParams);\n        uint oracleFee = _handleOracle(dstChainId, uaConfig, ua);\n        uint nativeProtocolFee = _handleProtocolFee(relayerFee, oracleFee, ua, _zroPaymentAddress);\n\n        // total native fee, does not include ZRO protocol fee\n        uint totalNativeFee = relayerFee.add(oracleFee).add(nativeProtocolFee);\n\n        // assert the user has attached enough native token for this address\n        require(totalNativeFee \u003c= msg.value, \"LayerZero: not enough native for fees\");\n        // refund if they send too much\n        uint amount = msg.value.sub(totalNativeFee);\n        if (amount \u003e 0) {\n            (bool success, ) = _refundAddress.call{value: amount}(\"\");\n            require(success, \"LayerZero: failed to refund\");\n        }\n\n        // emit the data packet\n        bytes memory encodedPayload = abi.encodePacked(nonce, localChainId, ua, dstChainId, dstAddress, payload);\n        emit Packet(encodedPayload);\n    }\n\n    function _handleRelayer(uint16 _dstChainId, ApplicationConfiguration memory _uaConfig, address _ua, uint _payloadSize, bytes memory _adapterParams) internal returns (uint relayerFee) {\n        if (_adapterParams.length == 0) {\n            _adapterParams = defaultAdapterParams[_dstChainId][_uaConfig.outboundProofType];\n        }\n        address relayerAddress = _uaConfig.relayer;\n        ILayerZeroRelayerV2 relayer = ILayerZeroRelayerV2(relayerAddress);\n        relayerFee = relayer.assignJob(_dstChainId, _uaConfig.outboundProofType, _ua, _payloadSize, _adapterParams);\n\n        _creditNativeFee(relayerAddress, relayerFee);\n\n        // emit the param events\n        emit RelayerParams(_adapterParams, _uaConfig.outboundProofType);\n    }\n\n    function _handleOracle(uint16 _dstChainId, ApplicationConfiguration memory _uaConfig, address _ua) internal returns (uint oracleFee) {\n        address oracleAddress = _uaConfig.oracle;\n        oracleFee = ILayerZeroOracleV2(oracleAddress).assignJob(_dstChainId, _uaConfig.outboundProofType, _uaConfig.outboundBlockConfirmations, _ua);\n\n        _creditNativeFee(oracleAddress, oracleFee);\n    }\n\n    function _handleProtocolFee(uint _relayerFee, uint _oracleFee, address _ua, address _zroPaymentAddress) internal returns (uint protocolNativeFee) {\n        // if no ZRO token or not specifying a payment address, pay in native token\n        bool payInNative = _zroPaymentAddress == address(0x0) || address(layerZeroToken) == address(0x0);\n        uint protocolFee = treasuryContract.getFees(!payInNative, _relayerFee, _oracleFee);\n\n        if (protocolFee \u003e 0) {\n            if (payInNative) {\n                address treasuryAddress = address(treasuryContract);\n                _creditNativeFee(treasuryAddress, protocolFee);\n                protocolNativeFee = protocolFee;\n            } else {\n                // zro payment address must equal the ua or the tx.origin otherwise the transaction reverts\n                require(_zroPaymentAddress == _ua || _zroPaymentAddress == tx.origin, \"LayerZero: must be paid by sender or origin\");\n\n                // transfer the LayerZero token to this contract from the payee\n                layerZeroToken.safeTransferFrom(_zroPaymentAddress, address(this), protocolFee);\n\n                treasuryZROFees = treasuryZROFees.add(protocolFee);\n            }\n        }\n    }\n\n    function _creditNativeFee(address _receiver, uint _amount) internal {\n        nativeFees[_receiver] = nativeFees[_receiver].add(_amount);\n    }\n\n    // Can be called by any address to update a block header\n    // can only upload new block data or the same block data with more confirmations\n    function updateHash(uint16 _srcChainId, bytes32 _lookupHash, uint _confirmations, bytes32 _blockData) external override {\n        uint storedConfirmations = hashLookup[msg.sender][_srcChainId][_lookupHash][_blockData];\n\n        // if it has a record, requires a larger confirmation.\n        require(storedConfirmations \u003c _confirmations, \"LayerZero: oracle data can only update if it has more confirmations\");\n\n        // set the new information into storage\n        hashLookup[msg.sender][_srcChainId][_lookupHash][_blockData] = _confirmations;\n\n        emit HashReceived(_srcChainId, msg.sender, _lookupHash, _blockData, _confirmations);\n    }\n\n    //----------------------------------------------------------------------------------\n    // Other Library Interfaces\n\n    // default to DEFAULT setting if ZERO value\n    function getAppConfig(uint16 _remoteChainId, address _ua) external view override returns (ApplicationConfiguration memory) {\n        return _getAppConfig(_remoteChainId, _ua);\n    }\n\n    function _getAppConfig(uint16 _remoteChainId, address _ua) internal view returns (ApplicationConfiguration memory) {\n        ApplicationConfiguration memory config = appConfig[_ua][_remoteChainId];\n        ApplicationConfiguration storage defaultConfig = defaultAppConfig[_remoteChainId];\n\n        if (config.inboundProofLibraryVersion == 0) {\n            config.inboundProofLibraryVersion = defaultConfig.inboundProofLibraryVersion;\n        }\n\n        if (config.inboundBlockConfirmations == 0) {\n            config.inboundBlockConfirmations = defaultConfig.inboundBlockConfirmations;\n        }\n\n        if (config.relayer == address(0x0)) {\n            config.relayer = defaultConfig.relayer;\n        }\n\n        if (config.outboundProofType == 0) {\n            config.outboundProofType = defaultConfig.outboundProofType;\n        }\n\n        if (config.outboundBlockConfirmations == 0) {\n            config.outboundBlockConfirmations = defaultConfig.outboundBlockConfirmations;\n        }\n\n        if (config.oracle == address(0x0)) {\n            config.oracle = defaultConfig.oracle;\n        }\n\n        return config;\n    }\n\n    function setConfig(uint16 _remoteChainId, address _ua, uint _configType, bytes calldata _config) external override onlyEndpoint {\n        ApplicationConfiguration storage uaConfig = appConfig[_ua][_remoteChainId];\n        if (_configType == CONFIG_TYPE_INBOUND_PROOF_LIBRARY_VERSION) {\n            uint16 inboundProofLibraryVersion = abi.decode(_config, (uint16));\n            require(inboundProofLibraryVersion \u003c= maxInboundProofLibrary[_remoteChainId], \"LayerZero: invalid inbound proof library version\");\n            uaConfig.inboundProofLibraryVersion = inboundProofLibraryVersion;\n        } else if (_configType == CONFIG_TYPE_INBOUND_BLOCK_CONFIRMATIONS) {\n            uint64 blockConfirmations = abi.decode(_config, (uint64));\n            uaConfig.inboundBlockConfirmations = blockConfirmations;\n        } else if (_configType == CONFIG_TYPE_RELAYER) {\n            address relayer = abi.decode(_config, (address));\n            uaConfig.relayer = relayer;\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_PROOF_TYPE) {\n            uint16 outboundProofType = abi.decode(_config, (uint16));\n            require(supportedOutboundProof[_remoteChainId][outboundProofType] || outboundProofType == 0, \"LayerZero: invalid outbound proof type\");\n            uaConfig.outboundProofType = outboundProofType;\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_BLOCK_CONFIRMATIONS) {\n            uint64 blockConfirmations = abi.decode(_config, (uint64));\n            uaConfig.outboundBlockConfirmations = blockConfirmations;\n        } else if (_configType == CONFIG_TYPE_ORACLE) {\n            address oracle = abi.decode(_config, (address));\n            uaConfig.oracle = oracle;\n        } else {\n            revert(\"LayerZero: Invalid config type\");\n        }\n\n        emit AppConfigUpdated(_ua, _configType, _config);\n    }\n\n    function getConfig(uint16 _remoteChainId, address _ua, uint _configType) external view override returns (bytes memory) {\n        ApplicationConfiguration storage uaConfig = appConfig[_ua][_remoteChainId];\n\n        if (_configType == CONFIG_TYPE_INBOUND_PROOF_LIBRARY_VERSION) {\n            if (uaConfig.inboundProofLibraryVersion == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].inboundProofLibraryVersion);\n            }\n            return abi.encode(uaConfig.inboundProofLibraryVersion);\n        } else if (_configType == CONFIG_TYPE_INBOUND_BLOCK_CONFIRMATIONS) {\n            if (uaConfig.inboundBlockConfirmations == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].inboundBlockConfirmations);\n            }\n            return abi.encode(uaConfig.inboundBlockConfirmations);\n        } else if (_configType == CONFIG_TYPE_RELAYER) {\n            if (uaConfig.relayer == address(0x0)) {\n                return abi.encode(defaultAppConfig[_remoteChainId].relayer);\n            }\n            return abi.encode(uaConfig.relayer);\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_PROOF_TYPE) {\n            if (uaConfig.outboundProofType == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].outboundProofType);\n            }\n            return abi.encode(uaConfig.outboundProofType);\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_BLOCK_CONFIRMATIONS) {\n            if (uaConfig.outboundBlockConfirmations == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].outboundBlockConfirmations);\n            }\n            return abi.encode(uaConfig.outboundBlockConfirmations);\n        } else if (_configType == CONFIG_TYPE_ORACLE) {\n            if (uaConfig.oracle == address(0x0)) {\n                return abi.encode(defaultAppConfig[_remoteChainId].oracle);\n            }\n            return abi.encode(uaConfig.oracle);\n        } else {\n            revert(\"LayerZero: Invalid config type\");\n        }\n    }\n\n    // returns the native fee the UA pays to cover fees\n    function estimateFees(uint16 _dstChainId, address _ua, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParams) external view override returns (uint nativeFee, uint zroFee) {\n        ApplicationConfiguration memory uaConfig = _getAppConfig(_dstChainId, _ua);\n\n        // Relayer Fee\n        bytes memory adapterParams;\n        if (_adapterParams.length \u003e 0) {\n            adapterParams = _adapterParams;\n        } else {\n            adapterParams = defaultAdapterParams[_dstChainId][uaConfig.outboundProofType];\n        }\n        uint relayerFee = ILayerZeroRelayerV2(uaConfig.relayer).getFee(_dstChainId, uaConfig.outboundProofType, _ua, _payload.length, adapterParams);\n\n        // Oracle Fee\n        address ua = _ua; // stack too deep\n        uint oracleFee = ILayerZeroOracleV2(uaConfig.oracle).getFee(_dstChainId, uaConfig.outboundProofType, uaConfig.outboundBlockConfirmations, ua);\n\n        // LayerZero Fee\n        uint protocolFee = treasuryContract.getFees(_payInZRO, relayerFee, oracleFee);\n        _payInZRO ? zroFee = protocolFee : nativeFee = protocolFee;\n\n        // return the sum of fees\n        nativeFee = nativeFee.add(relayerFee).add(oracleFee);\n    }\n\n    //---------------------------------------------------------------------------\n    // Claim Fees\n\n    // universal withdraw ZRO token function\n    function withdrawZRO(address _to, uint _amount) external override nonReentrant {\n        require(msg.sender == address(treasuryContract), \"LayerZero: only treasury\");\n        treasuryZROFees = treasuryZROFees.sub(_amount);\n        layerZeroToken.safeTransfer(_to, _amount);\n        emit WithdrawZRO(msg.sender, _to, _amount);\n    }\n\n    // universal withdraw native token function.\n    // the source contract should perform all the authentication control\n    function withdrawNative(address payable _to, uint _amount) external override nonReentrant {\n        require(_to != address(0x0), \"LayerZero: _to cannot be zero address\");\n        nativeFees[msg.sender] = nativeFees[msg.sender].sub(_amount);\n\n        (bool success, ) = _to.call{value: _amount}(\"\");\n        require(success, \"LayerZero: withdraw failed\");\n        emit WithdrawNative(msg.sender, _to, _amount);\n    }\n\n    //---------------------------------------------------------------------------\n    // Owner calls, configuration only.\n    function setLayerZeroToken(address _layerZeroToken) external onlyOwner {\n        require(_layerZeroToken != address(0x0), \"LayerZero: _layerZeroToken cannot be zero address\");\n        layerZeroToken = IERC20(_layerZeroToken);\n        emit SetLayerZeroToken(_layerZeroToken);\n    }\n\n    function setTreasury(address _treasury) external onlyOwner {\n        require(_treasury != address(0x0), \"LayerZero: treasury cannot be zero address\");\n        treasuryContract = ILayerZeroTreasury(_treasury);\n        emit SetTreasury(_treasury);\n    }\n\n    function addInboundProofLibraryForChain(uint16 _chainId, address _library) external onlyOwner {\n        require(_library != address(0x0), \"LayerZero: library cannot be zero address\");\n        uint16 libId = maxInboundProofLibrary[_chainId];\n        require(libId \u003c 65535, \"LayerZero: can not add new library\");\n        maxInboundProofLibrary[_chainId] = ++libId;\n        inboundProofLibrary[_chainId][libId] = _library;\n        emit AddInboundProofLibraryForChain(_chainId, _library);\n    }\n\n    function enableSupportedOutboundProof(uint16 _chainId, uint16 _proofType) external onlyOwner {\n        supportedOutboundProof[_chainId][_proofType] = true;\n        emit EnableSupportedOutboundProof(_chainId, _proofType);\n    }\n\n    function setDefaultConfigForChainId(uint16 _chainId, uint16 _inboundProofLibraryVersion, uint64 _inboundBlockConfirmations, address _relayer, uint16 _outboundProofType, uint64 _outboundBlockConfirmations, address _oracle) external onlyOwner {\n        require(_inboundProofLibraryVersion \u003c= maxInboundProofLibrary[_chainId] \u0026\u0026 _inboundProofLibraryVersion \u003e 0, \"LayerZero: invalid inbound proof library version\");\n        require(_inboundBlockConfirmations \u003e 0, \"LayerZero: invalid inbound block confirmation\");\n        require(_relayer != address(0x0), \"LayerZero: invalid relayer address\");\n        require(supportedOutboundProof[_chainId][_outboundProofType], \"LayerZero: invalid outbound proof type\");\n        require(_outboundBlockConfirmations \u003e 0, \"LayerZero: invalid outbound block confirmation\");\n        require(_oracle != address(0x0), \"LayerZero: invalid oracle address\");\n        defaultAppConfig[_chainId] = ApplicationConfiguration(_inboundProofLibraryVersion, _inboundBlockConfirmations, _relayer, _outboundProofType, _outboundBlockConfirmations, _oracle);\n        emit SetDefaultConfigForChainId(_chainId, _inboundProofLibraryVersion, _inboundBlockConfirmations, _relayer, _outboundProofType, _outboundBlockConfirmations, _oracle);\n    }\n\n    function setDefaultAdapterParamsForChainId(uint16 _chainId, uint16 _proofType, bytes calldata _adapterParams) external onlyOwner {\n        defaultAdapterParams[_chainId][_proofType] = _adapterParams;\n        emit SetDefaultAdapterParamsForChainId(_chainId, _proofType, _adapterParams);\n    }\n\n    function setRemoteUln(uint16 _remoteChainId, bytes32 _remoteUln) external onlyOwner {\n        require(ulnLookup[_remoteChainId] == bytes32(0), \"LayerZero: remote uln already set\");\n        ulnLookup[_remoteChainId] = _remoteUln;\n        emit SetRemoteUln(_remoteChainId, _remoteUln);\n    }\n\n    function setChainAddressSize(uint16 _chainId, uint _size) external onlyOwner {\n        require(chainAddressSizeMap[_chainId] == 0, \"LayerZero: remote chain address size already set\");\n        chainAddressSizeMap[_chainId] = _size;\n        emit SetChainAddressSize(_chainId, _size);\n    }\n\n    //----------------------------------------------------------------------------------\n    // view functions\n\n    function accruedNativeFee(address _address) external view override returns (uint) {\n        return nativeFees[_address];\n    }\n\n    function getOutboundNonce(uint16 _chainId, bytes calldata _path) external view override returns (uint64) {\n        return nonceContract.outboundNonce(_chainId, _path);\n    }\n\n    function _isContract(address addr) internal view returns (bool) {\n        uint size;\n        assembly {\n            size := extcodesize(addr)\n        }\n        return size != 0;\n    }\n}\n"}}

// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 * 
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 * 
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal virtual view returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () payable external {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () payable external {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     * 
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./Proxy.sol";
import "../utils/Address.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 * 
 * Upgradeability is only provided internally through {_upgradeTo}. For an externally upgradeable proxy see
 * {TransparentUpgradeableProxy}.
 */
contract UpgradeableProxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     * 
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if(_data.length > 0) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success,) = _logic.delegatecall(_data);
            require(success);
        }
    }
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal override view returns (address impl) {
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            impl := sload(slot)
        }
    }
    /**
     * @dev Upgrades the proxy to a new implementation.
     * 
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newImplementation)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../openzeppelin/proxy/UpgradeableProxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative inerface of your proxy.
 */
contract OptimizedTransparentUpgradeableProxy is UpgradeableProxy {
    address internal immutable _ADMIN;
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
     */
    constructor(
        address initialLogic,
        address initialAdmin,
        bytes memory _data
    ) payable UpgradeableProxy(initialLogic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        bytes32 slot = _ADMIN_SLOT;
        _ADMIN = initialAdmin;
        // still store it to work with EIP-1967
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, initialAdmin)
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _admin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address) {
        return _admin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address) {
        return _implementation();
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeTo(newImplementation);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeTo(newImplementation);
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = newImplementation.delegatecall(data);
        require(success);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view returns (address adm) {
        return _ADMIN;
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
import {Strategy} from "./Strategy.sol";
import {AssetsVault} from "../AssetsVault.sol";
contract StrategyController {
    using EnumerableSet for EnumerableSet.AddressSet;
    uint256 internal constant ONE_HUNDRED_PERCENT = 1e6;
    address public stoneVault;
    address payable public immutable assetsVault;
    EnumerableSet.AddressSet private strategies;
    mapping(address => uint256) public ratios;
    struct StrategyDiff {
        address strategy;
        bool isDeposit;
        uint256 amount;
    }
    modifier onlyVault() {
        require(stoneVault == msg.sender, "not vault");
        _;
    }
    constructor(
        address payable _assetsVault,
        address[] memory _strategies,
        uint256[] memory _ratios
    ) {
        require(_assetsVault != address(0), "ZERO ADDRESS");
        uint256 length = _strategies.length;
        for (uint256 i; i < length; i++) {
            require(_strategies[i] != address(0), "ZERO ADDRESS");
        }
        stoneVault = msg.sender;
        assetsVault = _assetsVault;
        _initStrategies(_strategies, _ratios);
    }
    function onlyRebaseStrategies() external {
        _rebase(0, 0);
    }
    function forceWithdraw(
        uint256 _amount
    ) external onlyVault returns (uint256 actualAmount) {
        uint256 balanceBeforeRepay = address(this).balance;
        if (balanceBeforeRepay >= _amount) {
            _repayToVault();
            actualAmount = balanceBeforeRepay;
        } else {
            actualAmount =
                _forceWithdraw(_amount - balanceBeforeRepay) +
                balanceBeforeRepay;
        }
    }
    function setStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) external onlyVault {
        _setStrategies(_strategies, _ratios);
    }
    function addStrategy(address _strategy) external onlyVault {
        require(!strategies.contains(_strategy), "already exist");
        strategies.add(_strategy);
    }
    function rebaseStrategies(
        uint256 _in,
        uint256 _out
    ) external payable onlyVault {
        _rebase(_in, _out);
    }
    function destroyStrategy(address _strategy) external onlyVault {
        _destoryStrategy(_strategy);
    }
    function _rebase(uint256 _in, uint256 _out) internal {
        require(_in == 0 || _out == 0, "only deposit or withdraw");
        if (_in != 0) {
            AssetsVault(assetsVault).withdraw(address(this), _in);
        }
        uint256 total = getAllStrategyValidValue();
        if (total < _out) {
            total = 0;
        } else {
            total = total + _in - _out;
        }
        uint256 length = strategies.length();
        StrategyDiff[] memory diffs = new StrategyDiff[](length);
        uint256 head;
        uint256 tail = length - 1;
        for (uint i; i < length; i++) {
            address strategy = strategies.at(i);
            if (ratios[strategy] == 0) {
                _clearStrategy(strategy, true);
                continue;
            }
            uint256 newPosition = (total * ratios[strategy]) /
                ONE_HUNDRED_PERCENT;
            uint256 position = getStrategyValidValue(strategy);
            if (newPosition < position) {
                diffs[head] = StrategyDiff(
                    strategy,
                    false,
                    position - newPosition
                );
                head++;
            } else if (newPosition > position) {
                diffs[tail] = StrategyDiff(
                    strategy,
                    true,
                    newPosition - position
                );
                if (tail != 0) {
                    tail--;
                }
            }
        }
        length = diffs.length;
        for (uint256 i; i < length; i++) {
            StrategyDiff memory diff = diffs[i];
            if (diff.amount == 0) {
                continue;
            }
            if (diff.isDeposit) {
                if (address(this).balance < diff.amount) {
                    diff.amount = address(this).balance;
                }
                _depositToStrategy(diff.strategy, diff.amount);
            } else {
                _withdrawFromStrategy(diff.strategy, diff.amount);
            }
        }
        _repayToVault();
    }
    function _repayToVault() internal {
        if (address(this).balance != 0) {
            TransferHelper.safeTransferETH(assetsVault, address(this).balance);
        }
    }
    function _depositToStrategy(address _strategy, uint256 _amount) internal {
        Strategy(_strategy).deposit{value: _amount}();
    }
    function _withdrawFromStrategy(
        address _strategy,
        uint256 _amount
    ) internal {
        Strategy(_strategy).withdraw(_amount);
    }
    function _forceWithdraw(
        uint256 _amount
    ) internal returns (uint256 actualAmount) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            address strategy = strategies.at(i);
            uint256 withAmount = (_amount * ratios[strategy]) /
                ONE_HUNDRED_PERCENT;
            if (withAmount != 0) {
                actualAmount =
                    Strategy(strategy).instantWithdraw(withAmount) +
                    actualAmount;
            }
        }
        _repayToVault();
    }
    function getStrategyValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getAllValue();
    }
    function getStrategyValidValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getInvestedValue();
    }
    function getStrategyPendingValue(
        address _strategy
    ) public returns (uint256 _value) {
        return Strategy(_strategy).getPendingValue();
    }
    function getAllStrategiesValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyValue(strategies.at(i));
        }
    }
    function getAllStrategyValidValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyValidValue(strategies.at(i));
        }
    }
    function getAllStrategyPendingValue() public returns (uint256 _value) {
        uint256 length = strategies.length();
        for (uint i; i < length; i++) {
            _value = _value + getStrategyPendingValue(strategies.at(i));
        }
    }
    function getStrategies()
        public
        view
        returns (address[] memory addrs, uint256[] memory portions)
    {
        uint256 length = strategies.length();
        addrs = new address[](length);
        portions = new uint256[](length);
        for (uint256 i; i < length; i++) {
            address addr = strategies.at(i);
            addrs[i] = addr;
            portions[i] = ratios[addr];
        }
    }
    function _initStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) internal {
        require(_strategies.length == _ratios.length, "invalid length");
        uint256 totalRatio;
        uint256 length = _strategies.length;
        for (uint i; i < length; i++) {
            strategies.add(_strategies[i]);
            ratios[_strategies[i]] = _ratios[i];
            totalRatio = totalRatio + _ratios[i];
        }
        require(totalRatio <= ONE_HUNDRED_PERCENT, "exceed 100%");
    }
    function _setStrategies(
        address[] memory _strategies,
        uint256[] memory _ratios
    ) internal {
        uint256 length = _strategies.length;
        require(length == _ratios.length, "invalid length");
        uint256 oldLength = strategies.length();
        for (uint i; i < oldLength; i++) {
            ratios[strategies.at(i)] = 0;
        }
        uint256 totalRatio;
        for (uint i; i < length; i++) {
            require(
                Strategy(_strategies[i]).controller() == address(this),
                "controller mismatch"
            );
            strategies.add(_strategies[i]);
            ratios[_strategies[i]] = _ratios[i];
            totalRatio = totalRatio + _ratios[i];
        }
        require(totalRatio <= ONE_HUNDRED_PERCENT, "exceed 100%");
    }
    function clearStrategy(address _strategy) public onlyVault {
        _clearStrategy(_strategy, false);
    }
    function _clearStrategy(address _strategy, bool _isRebase) internal {
        Strategy(_strategy).clear();
        if (!_isRebase) {
            _repayToVault();
        }
    }
    function _destoryStrategy(address _strategy) internal {
        require(_couldDestroyStrategy(_strategy), "still active");
        strategies.remove(_strategy);
        _repayToVault();
    }
    function _couldDestroyStrategy(
        address _strategy
    ) internal returns (bool status) {
        return
            ratios[_strategy] == 0 && Strategy(_strategy).getAllValue() < 1e4;
    }
    function setNewVault(address _vault) external onlyVault {
        stoneVault = _vault;
    }
    receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {StrategyController} from "../strategies/StrategyController.sol";
abstract contract Strategy {
    address payable public immutable controller;
    address public governance;
    string public name;
    modifier onlyGovernance() {
        require(governance == msg.sender, "not governace");
        _;
    }
    event TransferGovernance(address oldOwner, address newOwner);
    constructor(address payable _controller, string memory _name) {
        require(_controller != address(0), "ZERO ADDRESS");
        governance = msg.sender;
        controller = _controller;
        name = _name;
    }
    modifier onlyController() {
        require(controller == msg.sender, "not controller");
        _;
    }
    function deposit() public payable virtual onlyController {}
    function withdraw(
        uint256 _amount
    ) public virtual onlyController returns (uint256 actualAmount) {}
    function instantWithdraw(
        uint256 _amount
    ) public virtual onlyController returns (uint256 actualAmount) {}
    function clear() public virtual onlyController returns (uint256 amount) {}
    function execPendingRequest(
        uint256 _amount
    ) public virtual returns (uint256 amount) {}
    function getAllValue() public virtual returns (uint256 value) {}
    function getPendingValue() public virtual returns (uint256 value) {}
    function getInvestedValue() public virtual returns (uint256 value) {}
    function checkPendingStatus()
        public
        virtual
        returns (uint256 pending, uint256 executable)
    {}
    function setGovernance(address governance_) external onlyGovernance {
        emit TransferGovernance(governance, governance_);
        governance = governance_;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
contract AssetsVault {
    address public stoneVault;
    address public strategyController;
    modifier onlyPermit() {
        require(
            stoneVault == msg.sender || strategyController == msg.sender,
            "not permit"
        );
        _;
    }
    constructor(address _stoneVault, address _strategyController) {
        require(
            _stoneVault != address(0) && _strategyController != address(0),
            "ZERO ADDRESS"
        );
        stoneVault = _stoneVault;
        strategyController = _strategyController;
    }
    function deposit() external payable {
        require(msg.value != 0, "too small");
    }
    function withdraw(address _to, uint256 _amount) external onlyPermit {
        TransferHelper.safeTransferETH(_to, _amount);
    }
    function setNewVault(address _vault) external onlyPermit {
        stoneVault = _vault;
    }
    function getBalance() external view returns (uint256 amount) {
        amount = address(this).balance;
    }
    receive() external payable {}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
library TransferHelper {
    /// @notice Transfers tokens from the targeted address to the given destination
    /// @notice Errors with 'STF' if transfer fails
    /// @param token The contract address of the token to be transferred
    /// @param from The originating address from which the tokens will be transferred
    /// @param to The destination address of the transfer
    /// @param value The amount to be transferred
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) =
            token.call(abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'STF');
    }
    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Errors with ST if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'ST');
    }
    /// @notice Approves the stipulated contract to spend the given allowance in the given token
    /// @dev Errors with 'SA' if transfer fails
    /// @param token The contract address of the token to be approved
    /// @param to The target of the approval
    /// @param value The amount of the given token the target will be allowed to spend
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'SA');
    }
    /// @notice Transfers ETH to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'STE');
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.
    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];
        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.
            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;
            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];
                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }
            // Delete the slot where the moved value was stored
            set._values.pop();
            // Delete the index for the deleted slot
            delete set._indexes[value];
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }
    // Bytes32Set
    struct Bytes32Set {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // AddressSet
    struct AddressSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
    // UintSet
    struct UintSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;
        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        address oldImplementation = _getImplementation();
        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature("upgradeTo(address)", oldImplementation)
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _upgradeTo(newImplementation);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.8.9;
import {Address} from "@openzeppelin/contracts-v4.4/utils/Address.sol";
import {StorageSlot} from "@openzeppelin/contracts-v4.4/utils/StorageSlot.sol";
import {ERC1967Proxy} from "@openzeppelin/contracts-v4.4/proxy/ERC1967/ERC1967Proxy.sol";
/// @notice An ossifiable proxy contract. Extends the ERC1967Proxy contract by
///     adding admin functionality
contract OssifiableProxy is ERC1967Proxy {
    /// @dev Initializes the upgradeable proxy with the initial implementation and admin
    /// @param implementation_ Address of the implementation
    /// @param admin_ Address of the admin of the proxy
    /// @param data_ Data used in a delegate call to implementation. The delegate call will be
    ///     skipped if the data is empty bytes
    constructor(
        address implementation_,
        address admin_,
        bytes memory data_
    ) ERC1967Proxy(implementation_, data_) {
        _changeAdmin(admin_);
    }
    /// @notice Returns the current admin of the proxy
    function proxy__getAdmin() external view returns (address) {
        return _getAdmin();
    }
    /// @notice Returns the current implementation address
    function proxy__getImplementation() external view returns (address) {
        return _implementation();
    }
    /// @notice Returns whether the implementation is locked forever
    function proxy__getIsOssified() external view returns (bool) {
        return _getAdmin() == address(0);
    }
    /// @notice Allows to transfer admin rights to zero address and prevent future
    ///     upgrades of the proxy
    function proxy__ossify() external onlyAdmin {
        address prevAdmin = _getAdmin();
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = address(0);
        emit AdminChanged(prevAdmin, address(0));
        emit ProxyOssified();
    }
    /// @notice Changes the admin of the proxy
    /// @param newAdmin_ Address of the new admin
    function proxy__changeAdmin(address newAdmin_) external onlyAdmin {
        _changeAdmin(newAdmin_);
    }
    /// @notice Upgrades the implementation of the proxy
    /// @param newImplementation_ Address of the new implementation
    function proxy__upgradeTo(address newImplementation_) external onlyAdmin {
        _upgradeTo(newImplementation_);
    }
    /// @notice Upgrades the proxy to a new implementation, optionally performing an additional
    ///     setup call.
    /// @param newImplementation_ Address of the new implementation
    /// @param setupCalldata_ Data for the setup call. The call is skipped if setupCalldata_ is
    ///     empty and forceCall_ is false
    /// @param forceCall_ Forces make delegate call to the implementation even with empty data_
    function proxy__upgradeToAndCall(
        address newImplementation_,
        bytes memory setupCalldata_,
        bool forceCall_
    ) external onlyAdmin {
        _upgradeToAndCall(newImplementation_, setupCalldata_, forceCall_);
    }
    /// @dev Validates that proxy is not ossified and that method is called by the admin
    ///     of the proxy
    modifier onlyAdmin() {
        address admin = _getAdmin();
        if (admin == address(0)) {
            revert ProxyIsOssified();
        }
        if (admin != msg.sender) {
            revert NotAdmin();
        }
        _;
    }
    event ProxyOssified();
    error NotAdmin();
    error ProxyIsOssified();
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);
    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);
    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;
    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;
    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);
    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.
    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];
        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.
            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;
            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];
                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }
            // Delete the slot where the moved value was stored
            set._values.pop();
            // Delete the index for the deleted slot
            delete set._indexes[value];
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }
    // Bytes32Set
    struct Bytes32Set {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }
    // AddressSet
    struct AddressSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }
    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;
        assembly {
            result := store
        }
        return result;
    }
    // UintSet
    struct UintSet {
        Set _inner;
    }
    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }
    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }
    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }
    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }
    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;
        assembly {
            result := store
        }
        return result;
    }
}
// SPDX-FileCopyrightText: 2023 OpenZeppelin, Lido <[email protected]>
// SPDX-License-Identifier: MIT
// Based on https://github.com/OpenZeppelin/openzeppelin-contracts/blob/96a2297e15f1a4bbcf470d2d0d6cb9c579c63893/contracts/interfaces/IERC4906.sol
pragma solidity 0.8.9;
import {IERC165} from "@openzeppelin/contracts-v4.4/utils/introspection/IERC165.sol";
import {IERC721} from "@openzeppelin/contracts-v4.4/token/ERC721/IERC721.sol";
/// @title EIP-721 Metadata Update Extension
interface IERC4906 is IERC165, IERC721 {
    /// @dev This event emits when the metadata of a token is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFT.
    event MetadataUpdate(uint256 _tokenId);
    /// @dev This event emits when the metadata of a range of tokens is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFTs.
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;
library UnstructuredRefStorage {
    function storageMapUint256Address(bytes32 _position) internal pure returns (
        mapping(uint256 => address) storage result
    ) {
        assembly { result.slot := _position }
    }
    function storageMapAddressMapAddressBool(bytes32 _position) internal pure returns (
        mapping(address => mapping(address => bool)) storage result
    ) {
        assembly { result.slot := _position }
    }
}
/*
 * SPDX-License-Identifier: MIT
 */
pragma solidity 0.8.9;
/**
 * @notice Aragon Unstructured Storage library
 */
library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }
    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }
    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }
    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }
    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/AccessControl.sol)
//
// A modified AccessControl contract using unstructured storage. Copied from tree:
// https://github.com/OpenZeppelin/openzeppelin-contracts/tree/6bd6b76/contracts/access
//
/* See contracts/COMPILERS.md */
pragma solidity 0.8.9;
import "@openzeppelin/contracts-v4.4/access/IAccessControl.sol";
import "@openzeppelin/contracts-v4.4/utils/Context.sol";
import "@openzeppelin/contracts-v4.4/utils/Strings.sol";
import "@openzeppelin/contracts-v4.4/utils/introspection/ERC165.sol";
/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }
    /// @dev Storage slot: mapping(bytes32 => RoleData) _roles
    bytes32 private constant ROLES_POSITION = keccak256("openzeppelin.AccessControl._roles");
    function _storageRoles() private pure returns (mapping(bytes32 => RoleData) storage _roles) {
        bytes32 position = ROLES_POSITION;
        assembly { _roles.slot := position }
    }
    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }
    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view override returns (bool) {
        return _storageRoles()[role].members[account];
    }
    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(uint160(account), 20),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }
    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _storageRoles()[role].adminRole;
    }
    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }
    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }
    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");
        _revokeRole(role, account);
    }
    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }
    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _storageRoles()[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }
    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _storageRoles()[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }
    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _storageRoles()[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/AccessControlEnumerable.sol)
//
// A modified AccessControlEnumerable contract using unstructured storage. Copied from tree:
// https://github.com/OpenZeppelin/openzeppelin-contracts/tree/6bd6b76/contracts/access
//
/* See contracts/COMPILERS.md */
pragma solidity 0.8.9;
import "@openzeppelin/contracts-v4.4/access/IAccessControlEnumerable.sol";
import "@openzeppelin/contracts-v4.4/utils/structs/EnumerableSet.sol";
import "./AccessControl.sol";
/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;
    /// @dev Storage slot: mapping(bytes32 => EnumerableSet.AddressSet) _roleMembers
    bytes32 private constant ROLE_MEMBERS_POSITION = keccak256("openzeppelin.AccessControlEnumerable._roleMembers");
    function _storageRoleMembers() private pure returns (
        mapping(bytes32 => EnumerableSet.AddressSet) storage _roleMembers
    ) {
        bytes32 position = ROLE_MEMBERS_POSITION;
        assembly { _roleMembers.slot := position }
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
        return _storageRoleMembers()[role].at(index);
    }
    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
        return _storageRoleMembers()[role].length();
    }
    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _storageRoleMembers()[role].add(account);
    }
    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _storageRoleMembers()[role].remove(account);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.9;
import "../lib/UnstructuredStorage.sol";
contract PausableUntil {
    using UnstructuredStorage for bytes32;
    /// Contract resume/pause control storage slot
    bytes32 internal constant RESUME_SINCE_TIMESTAMP_POSITION = keccak256("lido.PausableUntil.resumeSinceTimestamp");
    /// Special value for the infinite pause
    uint256 public constant PAUSE_INFINITELY = type(uint256).max;
    /// @notice Emitted when paused by the `pauseFor` or `pauseUntil` call
    event Paused(uint256 duration);
    /// @notice Emitted when resumed by the `resume` call
    event Resumed();
    error ZeroPauseDuration();
    error PausedExpected();
    error ResumedExpected();
    error PauseUntilMustBeInFuture();
    /// @notice Reverts when resumed
    modifier whenPaused() {
        _checkPaused();
        _;
    }
    /// @notice Reverts when paused
    modifier whenResumed() {
        _checkResumed();
        _;
    }
    function _checkPaused() internal view {
        if (!isPaused()) {
            revert PausedExpected();
        }
    }
    function _checkResumed() internal view {
        if (isPaused()) {
            revert ResumedExpected();
        }
    }
    /// @notice Returns whether the contract is paused
    function isPaused() public view returns (bool) {
        return block.timestamp < RESUME_SINCE_TIMESTAMP_POSITION.getStorageUint256();
    }
    /// @notice Returns one of:
    ///  - PAUSE_INFINITELY if paused infinitely returns
    ///  - first second when get contract get resumed if paused for specific duration
    ///  - some timestamp in past if not paused
    function getResumeSinceTimestamp() external view returns (uint256) {
        return RESUME_SINCE_TIMESTAMP_POSITION.getStorageUint256();
    }
    function _resume() internal {
        _checkPaused();
        RESUME_SINCE_TIMESTAMP_POSITION.setStorageUint256(block.timestamp);
        emit Resumed();
    }
    function _pauseFor(uint256 _duration) internal {
        _checkResumed();
        if (_duration == 0) revert ZeroPauseDuration();
        uint256 resumeSince;
        if (_duration == PAUSE_INFINITELY) {
            resumeSince = PAUSE_INFINITELY;
        } else {
            resumeSince = block.timestamp + _duration;
        }
        _setPausedState(resumeSince);
    }
    function _pauseUntil(uint256 _pauseUntilInclusive) internal {
        _checkResumed();
        if (_pauseUntilInclusive < block.timestamp) revert PauseUntilMustBeInFuture();
        uint256 resumeSince;
        if (_pauseUntilInclusive != PAUSE_INFINITELY) {
            resumeSince = _pauseUntilInclusive + 1;
        } else {
            resumeSince = PAUSE_INFINITELY;
        }
        _setPausedState(resumeSince);
    }
    function _setPausedState(uint256 _resumeSince) internal {
        RESUME_SINCE_TIMESTAMP_POSITION.setStorageUint256(_resumeSince);
        if (_resumeSince == PAUSE_INFINITELY) {
            emit Paused(PAUSE_INFINITELY);
        } else {
            emit Paused(_resumeSince - block.timestamp);
        }
    }
}
// SPDX-FileCopyrightText: 2022 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.9;
import "../lib/UnstructuredStorage.sol";
contract Versioned {
    using UnstructuredStorage for bytes32;
    event ContractVersionSet(uint256 version);
    error NonZeroContractVersionOnInit();
    error InvalidContractVersionIncrement();
    error UnexpectedContractVersion(uint256 expected, uint256 received);
    /// @dev Storage slot: uint256 version
    /// Version of the initialized contract storage.
    /// The version stored in CONTRACT_VERSION_POSITION equals to:
    /// - 0 right after the deployment, before an initializer is invoked (and only at that moment);
    /// - N after calling initialize(), where N is the initially deployed contract version;
    /// - N after upgrading contract by calling finalizeUpgrade_vN().
    bytes32 internal constant CONTRACT_VERSION_POSITION = keccak256("lido.Versioned.contractVersion");
    uint256 internal constant PETRIFIED_VERSION_MARK = type(uint256).max;
    constructor() {
        // lock version in the implementation's storage to prevent initialization
        CONTRACT_VERSION_POSITION.setStorageUint256(PETRIFIED_VERSION_MARK);
    }
    /// @notice Returns the current contract version.
    function getContractVersion() public view returns (uint256) {
        return CONTRACT_VERSION_POSITION.getStorageUint256();
    }
    function _checkContractVersion(uint256 version) internal view {
        uint256 expectedVersion = getContractVersion();
        if (version != expectedVersion) {
            revert UnexpectedContractVersion(expectedVersion, version);
        }
    }
    /// @dev Sets the contract version to N. Should be called from the initialize() function.
    function _initializeContractVersionTo(uint256 version) internal {
        if (getContractVersion() != 0) revert NonZeroContractVersionOnInit();
        _setContractVersion(version);
    }
    /// @dev Updates the contract version. Should be called from a finalizeUpgrade_vN() function.
    function _updateContractVersion(uint256 newVersion) internal {
        if (newVersion != getContractVersion() + 1) revert InvalidContractVersionIncrement();
        _setContractVersion(newVersion);
    }
    function _setContractVersion(uint256 version) private {
        CONTRACT_VERSION_POSITION.setStorageUint256(version);
        emit ContractVersionSet(version);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.8.9;
import {WithdrawalQueueBase} from "./WithdrawalQueueBase.sol";
import {IERC20} from "@openzeppelin/contracts-v4.4/token/ERC20/IERC20.sol";
import {IERC20Permit} from "@openzeppelin/contracts-v4.4/token/ERC20/extensions/draft-IERC20Permit.sol";
import {EnumerableSet} from "@openzeppelin/contracts-v4.4/utils/structs/EnumerableSet.sol";
import {AccessControlEnumerable} from "./utils/access/AccessControlEnumerable.sol";
import {UnstructuredStorage} from "./lib/UnstructuredStorage.sol";
import {PausableUntil} from "./utils/PausableUntil.sol";
import {Versioned} from "./utils/Versioned.sol";
/// @notice Interface defining a Lido liquid staking pool
/// @dev see also [Lido liquid staking pool core contract](https://docs.lido.fi/contracts/lido)
interface IStETH is IERC20, IERC20Permit {
    function getSharesByPooledEth(uint256 _pooledEthAmount) external view returns (uint256);
}
/// @notice Interface defining a Lido liquid staking pool wrapper
/// @dev see WstETH.sol for full docs
interface IWstETH is IERC20, IERC20Permit {
    function unwrap(uint256 _wstETHAmount) external returns (uint256);
    function getStETHByWstETH(uint256 _wstETHAmount) external view returns (uint256);
    function stETH() external view returns (IStETH);
}
/// @title A contract for handling stETH withdrawal request queue within the Lido protocol
/// @author folkyatina
abstract contract WithdrawalQueue is AccessControlEnumerable, PausableUntil, WithdrawalQueueBase, Versioned {
    using UnstructuredStorage for bytes32;
    using EnumerableSet for EnumerableSet.UintSet;
    /// Bunker mode activation timestamp
    bytes32 internal constant BUNKER_MODE_SINCE_TIMESTAMP_POSITION =
        keccak256("lido.WithdrawalQueue.bunkerModeSinceTimestamp");
    /// Special value for timestamp when bunker mode is inactive (i.e., protocol in turbo mode)
    uint256 public constant BUNKER_MODE_DISABLED_TIMESTAMP = type(uint256).max;
    // ACL
    bytes32 public constant PAUSE_ROLE = keccak256("PAUSE_ROLE");
    bytes32 public constant RESUME_ROLE = keccak256("RESUME_ROLE");
    bytes32 public constant FINALIZE_ROLE = keccak256("FINALIZE_ROLE");
    bytes32 public constant ORACLE_ROLE = keccak256("ORACLE_ROLE");
    /// @notice minimal amount of stETH that is possible to withdraw
    uint256 public constant MIN_STETH_WITHDRAWAL_AMOUNT = 100;
    /// @notice maximum amount of stETH that is possible to withdraw by a single request
    /// Prevents accumulating too much funds per single request fulfillment in the future.
    /// @dev To withdraw larger amounts, it's recommended to split it to several requests
    uint256 public constant MAX_STETH_WITHDRAWAL_AMOUNT = 1000 * 1e18;
    /// @notice Lido stETH token address
    IStETH public immutable STETH;
    /// @notice Lido wstETH token address
    IWstETH public immutable WSTETH;
    event InitializedV1(address _admin);
    event BunkerModeEnabled(uint256 _sinceTimestamp);
    event BunkerModeDisabled();
    error AdminZeroAddress();
    error RequestAmountTooSmall(uint256 _amountOfStETH);
    error RequestAmountTooLarge(uint256 _amountOfStETH);
    error InvalidReportTimestamp();
    error RequestIdsNotSorted();
    error ZeroRecipient();
    error ArraysLengthMismatch(uint256 _firstArrayLength, uint256 _secondArrayLength);
    /// @param _wstETH address of WstETH contract
    constructor(IWstETH _wstETH) {
        // init immutables
        WSTETH = _wstETH;
        STETH = WSTETH.stETH();
    }
    /// @notice Initialize the contract storage explicitly.
    /// @param _admin admin address that can change every role.
    /// @dev Reverts if `_admin` equals to `address(0)`
    /// @dev NB! It's initialized in paused state by default and should be resumed explicitly to start
    /// @dev NB! Bunker mode is disabled by default
    function initialize(address _admin) external {
        if (_admin == address(0)) revert AdminZeroAddress();
        _initialize(_admin);
    }
    /// @notice Resume withdrawal requests placement and finalization
    ///  Contract is deployed in paused state and should be resumed explicitly
    function resume() external {
        _checkRole(RESUME_ROLE, msg.sender);
        _resume();
    }
    /// @notice Pause withdrawal requests placement and finalization. Claiming finalized requests will still be available
    /// @param _duration pause duration in seconds (use `PAUSE_INFINITELY` for unlimited)
    /// @dev Reverts if contract is already paused
    /// @dev Reverts reason if sender has no `PAUSE_ROLE`
    /// @dev Reverts if zero duration is passed
    function pauseFor(uint256 _duration) external onlyRole(PAUSE_ROLE) {
        _pauseFor(_duration);
    }
    /// @notice Pause withdrawal requests placement and finalization. Claiming finalized requests will still be available
    /// @param _pauseUntilInclusive the last second to pause until inclusive
    /// @dev Reverts if the timestamp is in the past
    /// @dev Reverts if sender has no `PAUSE_ROLE`
    /// @dev Reverts if contract is already paused
    function pauseUntil(uint256 _pauseUntilInclusive) external onlyRole(PAUSE_ROLE) {
        _pauseUntil(_pauseUntilInclusive);
    }
    /// @notice Request the batch of stETH for withdrawal. Approvals for the passed amounts should be done before.
    /// @param _amounts an array of stETH amount values.
    ///  The standalone withdrawal request will be created for each item in the passed list.
    /// @param _owner address that will be able to manage the created requests.
    ///  If `address(0)` is passed, `msg.sender` will be used as owner.
    /// @return requestIds an array of the created withdrawal request ids
    function requestWithdrawals(uint256[] calldata _amounts, address _owner)
        public
        returns (uint256[] memory requestIds)
    {
        _checkResumed();
        if (_owner == address(0)) _owner = msg.sender;
        requestIds = new uint256[](_amounts.length);
        for (uint256 i = 0; i < _amounts.length; ++i) {
            _checkWithdrawalRequestAmount(_amounts[i]);
            requestIds[i] = _requestWithdrawal(_amounts[i], _owner);
        }
    }
    /// @notice Request the batch of wstETH for withdrawal. Approvals for the passed amounts should be done before.
    /// @param _amounts an array of wstETH amount values.
    ///  The standalone withdrawal request will be created for each item in the passed list.
    /// @param _owner address that will be able to manage the created requests.
    ///  If `address(0)` is passed, `msg.sender` will be used as an owner.
    /// @return requestIds an array of the created withdrawal request ids
    function requestWithdrawalsWstETH(uint256[] calldata _amounts, address _owner)
        public
        returns (uint256[] memory requestIds)
    {
        _checkResumed();
        if (_owner == address(0)) _owner = msg.sender;
        requestIds = new uint256[](_amounts.length);
        for (uint256 i = 0; i < _amounts.length; ++i) {
            requestIds[i] = _requestWithdrawalWstETH(_amounts[i], _owner);
        }
    }
    struct PermitInput {
        uint256 value;
        uint256 deadline;
        uint8 v;
        bytes32 r;
        bytes32 s;
    }
    /// @notice Request the batch of stETH for withdrawal using EIP-2612 Permit
    /// @param _amounts an array of stETH amount values
    ///  The standalone withdrawal request will be created for each item in the passed list.
    /// @param _owner address that will be able to manage the created requests.
    ///  If `address(0)` is passed, `msg.sender` will be used as an owner.
    /// @param _permit data required for the stETH.permit() method to set the allowance
    /// @return requestIds an array of the created withdrawal request ids
    function requestWithdrawalsWithPermit(uint256[] calldata _amounts, address _owner, PermitInput calldata _permit)
        external
        returns (uint256[] memory requestIds)
    {
        STETH.permit(msg.sender, address(this), _permit.value, _permit.deadline, _permit.v, _permit.r, _permit.s);
        return requestWithdrawals(_amounts, _owner);
    }
    /// @notice Request the batch of wstETH for withdrawal using EIP-2612 Permit
    /// @param _amounts an array of wstETH amount values
    ///  The standalone withdrawal request will be created for each item in the passed list.
    /// @param _owner address that will be able to manage the created requests.
    ///  If `address(0)` is passed, `msg.sender` will be used as an owner.
    /// @param _permit data required for the wtETH.permit() method to set the allowance
    /// @return requestIds an array of the created withdrawal request ids
    function requestWithdrawalsWstETHWithPermit(
        uint256[] calldata _amounts,
        address _owner,
        PermitInput calldata _permit
    ) external returns (uint256[] memory requestIds) {
        WSTETH.permit(msg.sender, address(this), _permit.value, _permit.deadline, _permit.v, _permit.r, _permit.s);
        return requestWithdrawalsWstETH(_amounts, _owner);
    }
    /// @notice Returns all withdrawal requests that belongs to the `_owner` address
    ///
    /// WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
    /// to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
    /// this function has an unbounded cost, and using it as part of a state-changing function may render the function
    /// uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
    function getWithdrawalRequests(address _owner) external view returns (uint256[] memory requestsIds) {
        return _getRequestsByOwner()[_owner].values();
    }
    /// @notice Returns status for requests with provided ids
    /// @param _requestIds array of withdrawal request ids
    function getWithdrawalStatus(uint256[] calldata _requestIds)
        external
        view
        returns (WithdrawalRequestStatus[] memory statuses)
    {
        statuses = new WithdrawalRequestStatus[](_requestIds.length);
        for (uint256 i = 0; i < _requestIds.length; ++i) {
            statuses[i] = _getStatus(_requestIds[i]);
        }
    }
    /// @notice Returns amount of ether available for claim for each provided request id
    /// @param _requestIds array of request ids
    /// @param _hints checkpoint hints. can be found with `findCheckpointHints(_requestIds, 1, getLastCheckpointIndex())`
    /// @return claimableEthValues amount of claimable ether for each request, amount is equal to 0 if request
    ///  is not finalized or already claimed
    function getClaimableEther(uint256[] calldata _requestIds, uint256[] calldata _hints)
        external
        view
        returns (uint256[] memory claimableEthValues)
    {
        claimableEthValues = new uint256[](_requestIds.length);
        for (uint256 i = 0; i < _requestIds.length; ++i) {
            claimableEthValues[i] = _getClaimableEther(_requestIds[i], _hints[i]);
        }
    }
    /// @notice Claim a batch of withdrawal requests if they are finalized sending ether to `_recipient`
    /// @param _requestIds array of request ids to claim
    /// @param _hints checkpoint hint for each id. Can be obtained with `findCheckpointHints()`
    /// @param _recipient address where claimed ether will be sent to
    /// @dev
    ///  Reverts if recipient is equal to zero
    ///  Reverts if requestIds and hints arrays length differs
    ///  Reverts if any requestId or hint in arguments are not valid
    ///  Reverts if any request is not finalized or already claimed
    ///  Reverts if msg sender is not an owner of the requests
    function claimWithdrawalsTo(uint256[] calldata _requestIds, uint256[] calldata _hints, address _recipient)
        external
    {
        if (_recipient == address(0)) revert ZeroRecipient();
        if (_requestIds.length != _hints.length) {
            revert ArraysLengthMismatch(_requestIds.length, _hints.length);
        }
        for (uint256 i = 0; i < _requestIds.length; ++i) {
            _claim(_requestIds[i], _hints[i], _recipient);
            _emitTransfer(msg.sender, address(0), _requestIds[i]);
        }
    }
    /// @notice Claim a batch of withdrawal requests if they are finalized sending locked ether to the owner
    /// @param _requestIds array of request ids to claim
    /// @param _hints checkpoint hint for each id. Can be obtained with `findCheckpointHints()`
    /// @dev
    ///  Reverts if requestIds and hints arrays length differs
    ///  Reverts if any requestId or hint in arguments are not valid
    ///  Reverts if any request is not finalized or already claimed
    ///  Reverts if msg sender is not an owner of the requests
    function claimWithdrawals(uint256[] calldata _requestIds, uint256[] calldata _hints) external {
        if (_requestIds.length != _hints.length) {
            revert ArraysLengthMismatch(_requestIds.length, _hints.length);
        }
        for (uint256 i = 0; i < _requestIds.length; ++i) {
            _claim(_requestIds[i], _hints[i], msg.sender);
            _emitTransfer(msg.sender, address(0), _requestIds[i]);
        }
    }
    /// @notice Claim one`_requestId` request once finalized sending locked ether to the owner
    /// @param _requestId request id to claim
    /// @dev use unbounded loop to find a hint, which can lead to OOG
    /// @dev
    ///  Reverts if requestId or hint are not valid
    ///  Reverts if request is not finalized or already claimed
    ///  Reverts if msg sender is not an owner of request
    function claimWithdrawal(uint256 _requestId) external {
        _claim(_requestId, _findCheckpointHint(_requestId, 1, getLastCheckpointIndex()), msg.sender);
        _emitTransfer(msg.sender, address(0), _requestId);
    }
    /// @notice Finds the list of hints for the given `_requestIds` searching among the checkpoints with indices
    ///  in the range  `[_firstIndex, _lastIndex]`.
    ///  NB! Array of request ids should be sorted
    ///  NB! `_firstIndex` should be greater than 0, because checkpoint list is 1-based array
    ///  Usage: findCheckpointHints(_requestIds, 1, getLastCheckpointIndex())
    /// @param _requestIds ids of the requests sorted in the ascending order to get hints for
    /// @param _firstIndex left boundary of the search range. Should be greater than 0
    /// @param _lastIndex right boundary of the search range. Should be less than or equal to getLastCheckpointIndex()
    /// @return hintIds array of hints used to find required checkpoint for the request
    function findCheckpointHints(uint256[] calldata _requestIds, uint256 _firstIndex, uint256 _lastIndex)
        external
        view
        returns (uint256[] memory hintIds)
    {
        hintIds = new uint256[](_requestIds.length);
        uint256 prevRequestId = 0;
        for (uint256 i = 0; i < _requestIds.length; ++i) {
            if (_requestIds[i] < prevRequestId) revert RequestIdsNotSorted();
            hintIds[i] = _findCheckpointHint(_requestIds[i], _firstIndex, _lastIndex);
            _firstIndex = hintIds[i];
            prevRequestId = _requestIds[i];
        }
    }
    /// @notice Update bunker mode state and last report timestamp on oracle report
    /// @dev should be called by oracle
    ///
    /// @param _isBunkerModeNow is bunker mode reported by oracle
    /// @param _bunkerStartTimestamp timestamp of start of the bunker mode
    /// @param _currentReportTimestamp timestamp of the current report ref slot
    function onOracleReport(bool _isBunkerModeNow, uint256 _bunkerStartTimestamp, uint256 _currentReportTimestamp)
        external
    {
        _checkRole(ORACLE_ROLE, msg.sender);
        if (_bunkerStartTimestamp >= block.timestamp) revert InvalidReportTimestamp();
        if (_currentReportTimestamp >= block.timestamp) revert InvalidReportTimestamp();
        _setLastReportTimestamp(_currentReportTimestamp);
        bool isBunkerModeWasSetBefore = isBunkerModeActive();
        // on bunker mode state change
        if (_isBunkerModeNow != isBunkerModeWasSetBefore) {
            // write previous timestamp to enable bunker or max uint to disable
            if (_isBunkerModeNow) {
                BUNKER_MODE_SINCE_TIMESTAMP_POSITION.setStorageUint256(_bunkerStartTimestamp);
                emit BunkerModeEnabled(_bunkerStartTimestamp);
            } else {
                BUNKER_MODE_SINCE_TIMESTAMP_POSITION.setStorageUint256(BUNKER_MODE_DISABLED_TIMESTAMP);
                emit BunkerModeDisabled();
            }
        }
    }
    /// @notice Check if bunker mode is active
    function isBunkerModeActive() public view returns (bool) {
        return bunkerModeSinceTimestamp() < BUNKER_MODE_DISABLED_TIMESTAMP;
    }
    /// @notice Get bunker mode activation timestamp
    /// @dev returns `BUNKER_MODE_DISABLED_TIMESTAMP` if bunker mode is disable (i.e., protocol in turbo mode)
    function bunkerModeSinceTimestamp() public view returns (uint256) {
        return BUNKER_MODE_SINCE_TIMESTAMP_POSITION.getStorageUint256();
    }
    /// @notice Should emit ERC721 Transfer event in the inheriting contract
    function _emitTransfer(address from, address to, uint256 _requestId) internal virtual;
    /// @dev internal initialization helper. Doesn't check provided addresses intentionally
    function _initialize(address _admin) internal {
        _initializeQueue();
        _pauseFor(PAUSE_INFINITELY);
        _initializeContractVersionTo(1);
        _grantRole(DEFAULT_ADMIN_ROLE, _admin);
        BUNKER_MODE_SINCE_TIMESTAMP_POSITION.setStorageUint256(BUNKER_MODE_DISABLED_TIMESTAMP);
        emit InitializedV1(_admin);
    }
    function _requestWithdrawal(uint256 _amountOfStETH, address _owner) internal returns (uint256 requestId) {
        STETH.transferFrom(msg.sender, address(this), _amountOfStETH);
        uint256 amountOfShares = STETH.getSharesByPooledEth(_amountOfStETH);
        requestId = _enqueue(uint128(_amountOfStETH), uint128(amountOfShares), _owner);
        _emitTransfer(address(0), _owner, requestId);
    }
    function _requestWithdrawalWstETH(uint256 _amountOfWstETH, address _owner) internal returns (uint256 requestId) {
        WSTETH.transferFrom(msg.sender, address(this), _amountOfWstETH);
        uint256 amountOfStETH = WSTETH.unwrap(_amountOfWstETH);
        _checkWithdrawalRequestAmount(amountOfStETH);
        uint256 amountOfShares = STETH.getSharesByPooledEth(amountOfStETH);
        requestId = _enqueue(uint128(amountOfStETH), uint128(amountOfShares), _owner);
        _emitTransfer(address(0), _owner, requestId);
    }
    function _checkWithdrawalRequestAmount(uint256 _amountOfStETH) internal pure {
        if (_amountOfStETH < MIN_STETH_WITHDRAWAL_AMOUNT) {
            revert RequestAmountTooSmall(_amountOfStETH);
        }
        if (_amountOfStETH > MAX_STETH_WITHDRAWAL_AMOUNT) {
            revert RequestAmountTooLarge(_amountOfStETH);
        }
    }
    /// @notice returns claimable ether under the request. Returns 0 if request is not finalized or claimed
    function _getClaimableEther(uint256 _requestId, uint256 _hint) internal view returns (uint256) {
        if (_requestId == 0 || _requestId > getLastRequestId()) revert InvalidRequestId(_requestId);
        if (_requestId > getLastFinalizedRequestId()) return 0;
        WithdrawalRequest storage request = _getQueue()[_requestId];
        if (request.claimed) return 0;
        return _calculateClaimableEther(request, _requestId, _hint);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.8.9;
import "@openzeppelin/contracts-v4.4/utils/structs/EnumerableSet.sol";
import {UnstructuredStorage} from "./lib/UnstructuredStorage.sol";
/// @title Queue to store and manage WithdrawalRequests.
/// @dev Use an optimizations to store max share rates for finalized requests heavily inspired
/// by Aragon MiniMe token https://github.com/aragon/aragon-minime/blob/master/contracts/MiniMeToken.sol
///
/// @author folkyatina
abstract contract WithdrawalQueueBase {
    using EnumerableSet for EnumerableSet.UintSet;
    using UnstructuredStorage for bytes32;
    /// @dev maximal length of the batch array provided for prefinalization. See `prefinalize()`
    uint256 public constant MAX_BATCHES_LENGTH = 36;
    /// @notice precision base for share rate
    uint256 internal constant E27_PRECISION_BASE = 1e27;
    /// @dev return value for the `find...` methods in case of no result
    uint256 internal constant NOT_FOUND = 0;
    /// @dev queue for withdrawal requests, indexes (requestId) start from 1
    bytes32 internal constant QUEUE_POSITION = keccak256("lido.WithdrawalQueue.queue");
    /// @dev last index in request queue
    bytes32 internal constant LAST_REQUEST_ID_POSITION = keccak256("lido.WithdrawalQueue.lastRequestId");
    /// @dev last index of finalized request in the queue
    bytes32 internal constant LAST_FINALIZED_REQUEST_ID_POSITION =
        keccak256("lido.WithdrawalQueue.lastFinalizedRequestId");
    /// @dev finalization rate history, indexes start from 1
    bytes32 internal constant CHECKPOINTS_POSITION = keccak256("lido.WithdrawalQueue.checkpoints");
    /// @dev last index in checkpoints array
    bytes32 internal constant LAST_CHECKPOINT_INDEX_POSITION = keccak256("lido.WithdrawalQueue.lastCheckpointIndex");
    /// @dev amount of eth locked on contract for further claiming
    bytes32 internal constant LOCKED_ETHER_AMOUNT_POSITION = keccak256("lido.WithdrawalQueue.lockedEtherAmount");
    /// @dev withdrawal requests mapped to the owners
    bytes32 internal constant REQUEST_BY_OWNER_POSITION = keccak256("lido.WithdrawalQueue.requestsByOwner");
    /// @dev timestamp of the last oracle report
    bytes32 internal constant LAST_REPORT_TIMESTAMP_POSITION = keccak256("lido.WithdrawalQueue.lastReportTimestamp");
    /// @notice structure representing a request for withdrawal
    struct WithdrawalRequest {
        /// @notice sum of the all stETH submitted for withdrawals including this request
        uint128 cumulativeStETH;
        /// @notice sum of the all shares locked for withdrawal including this request
        uint128 cumulativeShares;
        /// @notice address that can claim or transfer the request
        address owner;
        /// @notice block.timestamp when the request was created
        uint40 timestamp;
        /// @notice flag if the request was claimed
        bool claimed;
        /// @notice timestamp of last oracle report for this request
        uint40 reportTimestamp;
    }
    /// @notice structure to store discounts for requests that are affected by negative rebase
    struct Checkpoint {
        uint256 fromRequestId;
        uint256 maxShareRate;
    }
    /// @notice output format struct for `_getWithdrawalStatus()` method
    struct WithdrawalRequestStatus {
        /// @notice stETH token amount that was locked on withdrawal queue for this request
        uint256 amountOfStETH;
        /// @notice amount of stETH shares locked on withdrawal queue for this request
        uint256 amountOfShares;
        /// @notice address that can claim or transfer this request
        address owner;
        /// @notice timestamp of when the request was created, in seconds
        uint256 timestamp;
        /// @notice true, if request is finalized
        bool isFinalized;
        /// @notice true, if request is claimed. Request is claimable if (isFinalized && !isClaimed)
        bool isClaimed;
    }
    /// @dev Contains both stETH token amount and its corresponding shares amount
    event WithdrawalRequested(
        uint256 indexed requestId,
        address indexed requestor,
        address indexed owner,
        uint256 amountOfStETH,
        uint256 amountOfShares
    );
    event WithdrawalsFinalized(
        uint256 indexed from, uint256 indexed to, uint256 amountOfETHLocked, uint256 sharesToBurn, uint256 timestamp
    );
    event WithdrawalClaimed(
        uint256 indexed requestId, address indexed owner, address indexed receiver, uint256 amountOfETH
    );
    error ZeroAmountOfETH();
    error ZeroShareRate();
    error ZeroTimestamp();
    error TooMuchEtherToFinalize(uint256 sent, uint256 maxExpected);
    error NotOwner(address _sender, address _owner);
    error InvalidRequestId(uint256 _requestId);
    error InvalidRequestIdRange(uint256 startId, uint256 endId);
    error InvalidState();
    error BatchesAreNotSorted();
    error EmptyBatches();
    error RequestNotFoundOrNotFinalized(uint256 _requestId);
    error NotEnoughEther();
    error RequestAlreadyClaimed(uint256 _requestId);
    error InvalidHint(uint256 _hint);
    error CantSendValueRecipientMayHaveReverted();
    /// @notice id of the last request
    ///  NB! requests are indexed from 1, so it returns 0 if there is no requests in the queue
    function getLastRequestId() public view returns (uint256) {
        return LAST_REQUEST_ID_POSITION.getStorageUint256();
    }
    /// @notice id of the last finalized request
    ///  NB! requests are indexed from 1, so it returns 0 if there is no finalized requests in the queue
    function getLastFinalizedRequestId() public view returns (uint256) {
        return LAST_FINALIZED_REQUEST_ID_POSITION.getStorageUint256();
    }
    /// @notice amount of ETH on this contract balance that is locked for withdrawal and available to claim
    function getLockedEtherAmount() public view returns (uint256) {
        return LOCKED_ETHER_AMOUNT_POSITION.getStorageUint256();
    }
    /// @notice length of the checkpoint array. Last possible value for the hint.
    ///  NB! checkpoints are indexed from 1, so it returns 0 if there is no checkpoints
    function getLastCheckpointIndex() public view returns (uint256) {
        return LAST_CHECKPOINT_INDEX_POSITION.getStorageUint256();
    }
    /// @notice return the number of unfinalized requests in the queue
    function unfinalizedRequestNumber() external view returns (uint256) {
        return getLastRequestId() - getLastFinalizedRequestId();
    }
    /// @notice Returns the amount of stETH in the queue yet to be finalized
    function unfinalizedStETH() external view returns (uint256) {
        return
            _getQueue()[getLastRequestId()].cumulativeStETH - _getQueue()[getLastFinalizedRequestId()].cumulativeStETH;
    }
    //
    // FINALIZATION FLOW
    //
    // Process when protocol is fixing the withdrawal request value and lock the required amount of ETH.
    // The value of a request after finalization can be:
    //  - nominal (when the amount of eth locked for this request are equal to the request's stETH)
    //  - discounted (when the amount of eth will be lower, because the protocol share rate dropped
    //   before request is finalized, so it will be equal to `request's shares` * `protocol share rate`)
    // The parameters that are required for finalization are:
    //  - current share rate of the protocol
    //  - id of the last request that can be finalized
    //  - the amount of eth that must be locked for these requests
    // To calculate the eth amount we'll need to know which requests in the queue will be finalized as nominal
    // and which as discounted and the exact value of the discount. It's impossible to calculate without the unbounded
    // loop over the unfinalized part of the queue. So, we need to extract a part of the algorithm off-chain, bring the
    // result with oracle report and check it later and check the result later.
    // So, we came to this solution:
    // Off-chain
    // 1. Oracle iterates over the queue off-chain and calculate the id of the latest finalizable request
    // in the queue. Then it splits all the requests that will be finalized into batches the way,
    // that requests in a batch are all nominal or all discounted.
    // And passes them in the report as the array of the ending ids of these batches. So it can be reconstructed like
    // `[lastFinalizedRequestId+1, batches[0]], [batches[0]+1, batches[1]] ... [batches[n-2], batches[n-1]]`
    // 2. Contract checks the validity of the batches on-chain and calculate the amount of eth required to
    //  finalize them. It can be done without unbounded loop using partial sums that are calculated on request enqueueing.
    // 3. Contract marks the request's as finalized and locks the eth for claiming. It also,
    //  set's the discount checkpoint for these request's if required that will be applied on claim for each request's
    // individually depending on request's share rate.
    /// @notice transient state that is used to pass intermediate results between several `calculateFinalizationBatches`
    //   invocations
    struct BatchesCalculationState {
        /// @notice amount of ether available in the protocol that can be used to finalize withdrawal requests
        ///  Will decrease on each call and will be equal to the remainder when calculation is finished
        ///  Should be set before the first call
        uint256 remainingEthBudget;
        /// @notice flag that is set to `true` if returned state is final and `false` if more calls are required
        bool finished;
        /// @notice static array to store last request id in each batch
        uint256[MAX_BATCHES_LENGTH] batches;
        /// @notice length of the filled part of `batches` array
        uint256 batchesLength;
    }
    /// @notice Offchain view for the oracle daemon that calculates how many requests can be finalized within
    /// the given budget, time period and share rate limits. Returned requests are split into batches.
    /// Each batch consist of the requests that all have the share rate below the `_maxShareRate` or above it.
    /// Below you can see an example how 14 requests with different share rates will be split into 5 batches by
    /// this method
    ///
    /// ^ share rate
    /// |
    /// |         • •
    /// |       •    •   • • •
    /// |----------------------•------ _maxShareRate
    /// |   •          •        • • •
    /// | •
    /// +-------------------------------> requestId
    ///  | 1st|  2nd  |3| 4th | 5th  |
    ///
    /// @param _maxShareRate current share rate of the protocol (1e27 precision)
    /// @param _maxTimestamp max timestamp of the request that can be finalized
    /// @param _maxRequestsPerCall max request number that can be processed per call.
    /// @param _state structure that accumulates the state across multiple invocations to overcome gas limits.
    ///  To start calculation you should pass `state.remainingEthBudget` and `state.finished == false` and then invoke
    ///  the function with returned `state` until it returns a state with `finished` flag set
    /// @return state that is changing on each call and should be passed to the next call until `state.finished` is true
    function calculateFinalizationBatches(
        uint256 _maxShareRate,
        uint256 _maxTimestamp,
        uint256 _maxRequestsPerCall,
        BatchesCalculationState memory _state
    ) external view returns (BatchesCalculationState memory) {
        if (_state.finished || _state.remainingEthBudget == 0) revert InvalidState();
        uint256 currentId;
        WithdrawalRequest memory prevRequest;
        uint256 prevRequestShareRate;
        if (_state.batchesLength == 0) {
            currentId = getLastFinalizedRequestId() + 1;
            prevRequest = _getQueue()[currentId - 1];
        } else {
            uint256 lastHandledRequestId = _state.batches[_state.batchesLength - 1];
            currentId = lastHandledRequestId + 1;
            prevRequest = _getQueue()[lastHandledRequestId];
            (prevRequestShareRate,,) = _calcBatch(_getQueue()[lastHandledRequestId - 1], prevRequest);
        }
        uint256 nextCallRequestId = currentId + _maxRequestsPerCall;
        uint256 queueLength = getLastRequestId() + 1;
        while (currentId < queueLength && currentId < nextCallRequestId) {
            WithdrawalRequest memory request = _getQueue()[currentId];
            if (request.timestamp > _maxTimestamp) break; // max timestamp break
            (uint256 requestShareRate, uint256 ethToFinalize, uint256 shares) = _calcBatch(prevRequest, request);
            if (requestShareRate > _maxShareRate) {
                // discounted
                ethToFinalize = (shares * _maxShareRate) / E27_PRECISION_BASE;
            }
            if (ethToFinalize > _state.remainingEthBudget) break; // budget break
            _state.remainingEthBudget -= ethToFinalize;
            if (_state.batchesLength != 0 && (
                // share rate of requests in the same batch can differ by 1-2 wei because of the rounding error
                // (issue: https://github.com/lidofinance/lido-dao/issues/442 )
                // so we're taking requests that are placed during the same report
                // as equal even if their actual share rate are different
                prevRequest.reportTimestamp == request.reportTimestamp ||
                // both requests are below the line
                prevRequestShareRate <= _maxShareRate && requestShareRate <= _maxShareRate ||
                // both requests are above the line
                prevRequestShareRate > _maxShareRate && requestShareRate > _maxShareRate
            )) {
                _state.batches[_state.batchesLength - 1] = currentId; // extend the last batch
            } else {
                // to be able to check batches on-chain we need array to have limited length
                if (_state.batchesLength == MAX_BATCHES_LENGTH) break;
                // create a new batch
                _state.batches[_state.batchesLength] = currentId;
                ++_state.batchesLength;
            }
            prevRequestShareRate = requestShareRate;
            prevRequest = request;
            unchecked{ ++currentId; }
        }
        _state.finished = currentId == queueLength || currentId < nextCallRequestId;
        return _state;
    }
    /// @notice Checks finalization batches, calculates required ether and the amount of shares to burn
    /// @param _batches finalization batches calculated offchain using `calculateFinalizationBatches()`
    /// @param _maxShareRate max share rate that will be used for request finalization (1e27 precision)
    /// @return ethToLock amount of ether that should be sent with `finalize()` method
    /// @return sharesToBurn amount of shares that belongs to requests that will be finalized
    function prefinalize(uint256[] calldata _batches, uint256 _maxShareRate)
        external
        view
        returns (uint256 ethToLock, uint256 sharesToBurn)
    {
        if (_maxShareRate == 0) revert ZeroShareRate();
        if (_batches.length == 0) revert EmptyBatches();
        if (_batches[0] <= getLastFinalizedRequestId()) revert InvalidRequestId(_batches[0]);
        if (_batches[_batches.length - 1] > getLastRequestId()) revert InvalidRequestId(_batches[_batches.length - 1]);
        uint256 currentBatchIndex;
        uint256 prevBatchEndRequestId = getLastFinalizedRequestId();
        WithdrawalRequest memory prevBatchEnd = _getQueue()[prevBatchEndRequestId];
        while (currentBatchIndex < _batches.length) {
            uint256 batchEndRequestId = _batches[currentBatchIndex];
            if (batchEndRequestId <= prevBatchEndRequestId) revert BatchesAreNotSorted();
            WithdrawalRequest memory batchEnd = _getQueue()[batchEndRequestId];
            (uint256 batchShareRate, uint256 stETH, uint256 shares) = _calcBatch(prevBatchEnd, batchEnd);
            if (batchShareRate > _maxShareRate) {
                // discounted
                ethToLock += shares * _maxShareRate / E27_PRECISION_BASE;
            } else {
                // nominal
                ethToLock += stETH;
            }
            sharesToBurn += shares;
            prevBatchEndRequestId = batchEndRequestId;
            prevBatchEnd = batchEnd;
            unchecked{ ++currentBatchIndex; }
        }
    }
    /// @dev Finalize requests in the queue
    ///  Emits WithdrawalsFinalized event.
    function _finalize(uint256 _lastRequestIdToBeFinalized, uint256 _amountOfETH, uint256 _maxShareRate) internal {
        if (_lastRequestIdToBeFinalized > getLastRequestId()) revert InvalidRequestId(_lastRequestIdToBeFinalized);
        uint256 lastFinalizedRequestId = getLastFinalizedRequestId();
        if (_lastRequestIdToBeFinalized <= lastFinalizedRequestId) revert InvalidRequestId(_lastRequestIdToBeFinalized);
        WithdrawalRequest memory lastFinalizedRequest = _getQueue()[lastFinalizedRequestId];
        WithdrawalRequest memory requestToFinalize = _getQueue()[_lastRequestIdToBeFinalized];
        uint128 stETHToFinalize = requestToFinalize.cumulativeStETH - lastFinalizedRequest.cumulativeStETH;
        if (_amountOfETH > stETHToFinalize) revert TooMuchEtherToFinalize(_amountOfETH, stETHToFinalize);
        uint256 firstRequestIdToFinalize = lastFinalizedRequestId + 1;
        uint256 lastCheckpointIndex = getLastCheckpointIndex();
        // add a new checkpoint with current finalization max share rate
        _getCheckpoints()[lastCheckpointIndex + 1] = Checkpoint(firstRequestIdToFinalize, _maxShareRate);
        _setLastCheckpointIndex(lastCheckpointIndex + 1);
        _setLockedEtherAmount(getLockedEtherAmount() + _amountOfETH);
        _setLastFinalizedRequestId(_lastRequestIdToBeFinalized);
        emit WithdrawalsFinalized(
            firstRequestIdToFinalize,
            _lastRequestIdToBeFinalized,
            _amountOfETH,
            requestToFinalize.cumulativeShares - lastFinalizedRequest.cumulativeShares,
            block.timestamp
        );
    }
    /// @dev creates a new `WithdrawalRequest` in the queue
    ///  Emits WithdrawalRequested event
    function _enqueue(uint128 _amountOfStETH, uint128 _amountOfShares, address _owner)
        internal
        returns (uint256 requestId)
    {
        uint256 lastRequestId = getLastRequestId();
        WithdrawalRequest memory lastRequest = _getQueue()[lastRequestId];
        uint128 cumulativeShares = lastRequest.cumulativeShares + _amountOfShares;
        uint128 cumulativeStETH = lastRequest.cumulativeStETH + _amountOfStETH;
        requestId = lastRequestId + 1;
        _setLastRequestId(requestId);
        WithdrawalRequest memory newRequest =  WithdrawalRequest(
            cumulativeStETH,
            cumulativeShares,
            _owner,
            uint40(block.timestamp),
            false,
            uint40(_getLastReportTimestamp())
        );
        _getQueue()[requestId] = newRequest;
        assert(_getRequestsByOwner()[_owner].add(requestId));
        emit WithdrawalRequested(requestId, msg.sender, _owner, _amountOfStETH, _amountOfShares);
    }
    /// @dev Returns the status of the withdrawal request with `_requestId` id
    function _getStatus(uint256 _requestId) internal view returns (WithdrawalRequestStatus memory status) {
        if (_requestId == 0 || _requestId > getLastRequestId()) revert InvalidRequestId(_requestId);
        WithdrawalRequest memory request = _getQueue()[_requestId];
        WithdrawalRequest memory previousRequest = _getQueue()[_requestId - 1];
        status = WithdrawalRequestStatus(
            request.cumulativeStETH - previousRequest.cumulativeStETH,
            request.cumulativeShares - previousRequest.cumulativeShares,
            request.owner,
            request.timestamp,
            _requestId <= getLastFinalizedRequestId(),
            request.claimed
        );
    }
    /// @dev View function to find a checkpoint hint to use in `claimWithdrawal()` and `getClaimableEther()`
    ///  Search will be performed in the range of `[_firstIndex, _lastIndex]`
    ///
    /// @param _requestId request id to search the checkpoint for
    /// @param _start index of the left boundary of the search range, should be greater than 0
    /// @param _end index of the right boundary of the search range, should be less than or equal
    ///  to `getLastCheckpointIndex()`
    ///
    /// @return hint for later use in other methods or 0 if hint not found in the range
    function _findCheckpointHint(uint256 _requestId, uint256 _start, uint256 _end) internal view returns (uint256) {
        if (_requestId == 0 || _requestId > getLastRequestId()) revert InvalidRequestId(_requestId);
        uint256 lastCheckpointIndex = getLastCheckpointIndex();
        if (_start == 0 || _end > lastCheckpointIndex) revert InvalidRequestIdRange(_start, _end);
        if (lastCheckpointIndex == 0 || _requestId > getLastFinalizedRequestId() || _start > _end) return NOT_FOUND;
        // Right boundary
        if (_requestId >= _getCheckpoints()[_end].fromRequestId) {
            // it's the last checkpoint, so it's valid
            if (_end == lastCheckpointIndex) return _end;
            // it fits right before the next checkpoint
            if (_requestId < _getCheckpoints()[_end + 1].fromRequestId) return _end;
            return NOT_FOUND;
        }
        // Left boundary
        if (_requestId < _getCheckpoints()[_start].fromRequestId) {
            return NOT_FOUND;
        }
        // Binary search
        uint256 min = _start;
        uint256 max = _end - 1;
        while (max > min) {
            uint256 mid = (max + min + 1) / 2;
            if (_getCheckpoints()[mid].fromRequestId <= _requestId) {
                min = mid;
            } else {
                max = mid - 1;
            }
        }
        return min;
    }
    /// @dev Claim the request and transfer locked ether to `_recipient`.
    ///  Emits WithdrawalClaimed event
    /// @param _requestId id of the request to claim
    /// @param _hint hint the checkpoint to use. Can be obtained by calling `findCheckpointHint()`
    /// @param _recipient address to send ether to
    function _claim(uint256 _requestId, uint256 _hint, address _recipient) internal {
        if (_requestId == 0) revert InvalidRequestId(_requestId);
        if (_requestId > getLastFinalizedRequestId()) revert RequestNotFoundOrNotFinalized(_requestId);
        WithdrawalRequest storage request = _getQueue()[_requestId];
        if (request.claimed) revert RequestAlreadyClaimed(_requestId);
        if (request.owner != msg.sender) revert NotOwner(msg.sender, request.owner);
        request.claimed = true;
        assert(_getRequestsByOwner()[request.owner].remove(_requestId));
        uint256 ethWithDiscount = _calculateClaimableEther(request, _requestId, _hint);
        // because of the stETH rounding issue
        // (issue: https://github.com/lidofinance/lido-dao/issues/442 )
        // some dust (1-2 wei per request) will be accumulated upon claiming
        _setLockedEtherAmount(getLockedEtherAmount() - ethWithDiscount);
        _sendValue(_recipient, ethWithDiscount);
        emit WithdrawalClaimed(_requestId, msg.sender, _recipient, ethWithDiscount);
    }
    /// @dev Calculates ether value for the request using the provided hint. Checks if hint is valid
    /// @return claimableEther discounted eth for `_requestId`
    function _calculateClaimableEther(WithdrawalRequest storage _request, uint256 _requestId, uint256 _hint)
        internal
        view
        returns (uint256 claimableEther)
    {
        if (_hint == 0) revert InvalidHint(_hint);
        uint256 lastCheckpointIndex = getLastCheckpointIndex();
        if (_hint > lastCheckpointIndex) revert InvalidHint(_hint);
        Checkpoint memory checkpoint = _getCheckpoints()[_hint];
        // Reverts if requestId is not in range [checkpoint[hint], checkpoint[hint+1])
        // ______(>______
        //    ^  hint
        if (_requestId < checkpoint.fromRequestId) revert InvalidHint(_hint);
        if (_hint < lastCheckpointIndex) {
            // ______(>______(>________
            //       hint    hint+1  ^
            Checkpoint memory nextCheckpoint = _getCheckpoints()[_hint + 1];
            if (nextCheckpoint.fromRequestId <= _requestId) revert InvalidHint(_hint);
        }
        WithdrawalRequest memory prevRequest = _getQueue()[_requestId - 1];
        (uint256 batchShareRate, uint256 eth, uint256 shares) = _calcBatch(prevRequest, _request);
        if (batchShareRate > checkpoint.maxShareRate) {
            eth = shares * checkpoint.maxShareRate / E27_PRECISION_BASE;
        }
        return eth;
    }
    /// @dev quazi-constructor
    function _initializeQueue() internal {
        // setting dummy zero structs in checkpoints and queue beginning
        // to avoid uint underflows and related if-branches
        // 0-index is reserved as 'not_found' response in the interface everywhere
        _getQueue()[0] = WithdrawalRequest(0, 0, address(0), uint40(block.timestamp), true, 0);
        _getCheckpoints()[getLastCheckpointIndex()] = Checkpoint(0, 0);
    }
    function _sendValue(address _recipient, uint256 _amount) internal {
        if (address(this).balance < _amount) revert NotEnoughEther();
        // solhint-disable-next-line
        (bool success,) = _recipient.call{value: _amount}("");
        if (!success) revert CantSendValueRecipientMayHaveReverted();
    }
    /// @dev calculate batch stats (shareRate, stETH and shares) for the range of `(_preStartRequest, _endRequest]`
    function _calcBatch(WithdrawalRequest memory _preStartRequest, WithdrawalRequest memory _endRequest)
        internal
        pure
        returns (uint256 shareRate, uint256 stETH, uint256 shares)
    {
        stETH = _endRequest.cumulativeStETH - _preStartRequest.cumulativeStETH;
        shares = _endRequest.cumulativeShares - _preStartRequest.cumulativeShares;
        shareRate = stETH * E27_PRECISION_BASE / shares;
    }
    //
    // Internal getters and setters for unstructured storage
    //
    function _getQueue() internal pure returns (mapping(uint256 => WithdrawalRequest) storage queue) {
        bytes32 position = QUEUE_POSITION;
        assembly {
            queue.slot := position
        }
    }
    function _getCheckpoints() internal pure returns (mapping(uint256 => Checkpoint) storage checkpoints) {
        bytes32 position = CHECKPOINTS_POSITION;
        assembly {
            checkpoints.slot := position
        }
    }
    function _getRequestsByOwner()
        internal
        pure
        returns (mapping(address => EnumerableSet.UintSet) storage requestsByOwner)
    {
        bytes32 position = REQUEST_BY_OWNER_POSITION;
        assembly {
            requestsByOwner.slot := position
        }
    }
    function _getLastReportTimestamp() internal view returns (uint256) {
        return LAST_REPORT_TIMESTAMP_POSITION.getStorageUint256();
    }
    function _setLastRequestId(uint256 _lastRequestId) internal {
        LAST_REQUEST_ID_POSITION.setStorageUint256(_lastRequestId);
    }
    function _setLastFinalizedRequestId(uint256 _lastFinalizedRequestId) internal {
        LAST_FINALIZED_REQUEST_ID_POSITION.setStorageUint256(_lastFinalizedRequestId);
    }
    function _setLastCheckpointIndex(uint256 _lastCheckpointIndex) internal {
        LAST_CHECKPOINT_INDEX_POSITION.setStorageUint256(_lastCheckpointIndex);
    }
    function _setLockedEtherAmount(uint256 _lockedEtherAmount) internal {
        LOCKED_ETHER_AMOUNT_POSITION.setStorageUint256(_lockedEtherAmount);
    }
    function _setLastReportTimestamp(uint256 _lastReportTimestamp) internal {
        LAST_REPORT_TIMESTAMP_POSITION.setStorageUint256(_lastReportTimestamp);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>, OpenZeppelin
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.8.9;
import {IERC721} from "@openzeppelin/contracts-v4.4/token/ERC721/IERC721.sol";
import {IERC721Receiver} from "@openzeppelin/contracts-v4.4/token/ERC721/IERC721Receiver.sol";
import {IERC721Metadata} from "@openzeppelin/contracts-v4.4/token/ERC721/extensions/IERC721Metadata.sol";
import {IERC165} from "@openzeppelin/contracts-v4.4/utils/introspection/IERC165.sol";
import {IERC4906} from "./interfaces/IERC4906.sol";
import {EnumerableSet} from "@openzeppelin/contracts-v4.4/utils/structs/EnumerableSet.sol";
import {Address} from "@openzeppelin/contracts-v4.4/utils/Address.sol";
import {Strings} from "@openzeppelin/contracts-v4.4/utils/Strings.sol";
import {IWstETH, WithdrawalQueue} from "./WithdrawalQueue.sol";
import {AccessControlEnumerable} from "./utils/access/AccessControlEnumerable.sol";
import {UnstructuredRefStorage} from "./lib/UnstructuredRefStorage.sol";
import {UnstructuredStorage} from "./lib/UnstructuredStorage.sol";
/// @title Interface defining INFTDescriptor to generate ERC721 tokenURI
interface INFTDescriptor {
    /// @notice Returns ERC721 tokenURI content
    /// @param _requestId is an id for particular withdrawal request
    function constructTokenURI(uint256 _requestId) external view returns (string memory);
}
/// @title NFT implementation on top of {WithdrawalQueue}
/// NFT is minted on every request and burned on claim
///
/// @author psirex, folkyatina
contract WithdrawalQueueERC721 is IERC721Metadata, IERC4906, WithdrawalQueue {
    using Address for address;
    using Strings for uint256;
    using EnumerableSet for EnumerableSet.UintSet;
    using UnstructuredRefStorage for bytes32;
    using UnstructuredStorage for bytes32;
    bytes32 internal constant TOKEN_APPROVALS_POSITION = keccak256("lido.WithdrawalQueueERC721.tokenApprovals");
    bytes32 internal constant OPERATOR_APPROVALS_POSITION = keccak256("lido.WithdrawalQueueERC721.operatorApprovals");
    bytes32 internal constant BASE_URI_POSITION = keccak256("lido.WithdrawalQueueERC721.baseUri");
    bytes32 internal constant NFT_DESCRIPTOR_ADDRESS_POSITION =
        keccak256("lido.WithdrawalQueueERC721.nftDescriptorAddress");
    bytes32 public constant MANAGE_TOKEN_URI_ROLE = keccak256("MANAGE_TOKEN_URI_ROLE");
    // @notion simple wrapper for base URI string
    //  Solidity does not allow to store string in UnstructuredStorage
    struct BaseURI {
        string value;
    }
    event BaseURISet(string baseURI);
    event NftDescriptorAddressSet(address nftDescriptorAddress);
    error ApprovalToOwner();
    error ApproveToCaller();
    error NotOwnerOrApprovedForAll(address sender);
    error NotOwnerOrApproved(address sender);
    error TransferFromIncorrectOwner(address from, address realOwner);
    error TransferToZeroAddress();
    error TransferFromZeroAddress();
    error TransferToThemselves();
    error TransferToNonIERC721Receiver(address);
    error InvalidOwnerAddress(address);
    error StringTooLong(string str);
    error ZeroMetadata();
    // short strings for ERC721 name and symbol
    bytes32 private immutable NAME;
    bytes32 private immutable SYMBOL;
    /// @param _wstETH address of WstETH contract
    /// @param _name IERC721Metadata name string. Should be shorter than 32 bytes
    /// @param _symbol IERC721Metadata symbol string. Should be shorter than 32 bytes
    constructor(address _wstETH, string memory _name, string memory _symbol) WithdrawalQueue(IWstETH(_wstETH)) {
        if (bytes(_name).length == 0 || bytes(_symbol).length == 0) revert ZeroMetadata();
        NAME = _toBytes32(_name);
        SYMBOL = _toBytes32(_symbol);
    }
    /// @dev See {IERC165-supportsInterface}.
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(IERC165, AccessControlEnumerable)
        returns (bool)
    {
        return interfaceId == type(IERC721).interfaceId || interfaceId == type(IERC721Metadata).interfaceId
            // 0x49064906 is magic number ERC4906 interfaceId as defined in the standard https://eips.ethereum.org/EIPS/eip-4906
            || interfaceId == bytes4(0x49064906) || super.supportsInterface(interfaceId);
    }
    /// @dev See {IERC721Metadata-name}.
    function name() external view override returns (string memory) {
        return _toString(NAME);
    }
    /// @dev See {IERC721Metadata-symbol}.
    function symbol() external view override returns (string memory) {
        return _toString(SYMBOL);
    }
    /// @dev See {IERC721Metadata-tokenURI}.
    /// @dev If NFTDescriptor address isn't set the `baseURI` would be used for generating erc721 tokenURI. In case
    ///  NFTDescriptor address is set it would be used as a first-priority method.
    function tokenURI(uint256 _requestId) public view virtual override returns (string memory) {
        if (!_existsAndNotClaimed(_requestId)) revert InvalidRequestId(_requestId);
        address nftDescriptorAddress = NFT_DESCRIPTOR_ADDRESS_POSITION.getStorageAddress();
        if (nftDescriptorAddress != address(0)) {
            return INFTDescriptor(nftDescriptorAddress).constructTokenURI(_requestId);
        } else {
            return _constructTokenUri(_requestId);
        }
    }
    /// @notice Base URI for computing {tokenURI}. If set, the resulting URI for each
    /// token will be the concatenation of the `baseURI` and the `_requestId`.
    function getBaseURI() external view returns (string memory) {
        return _getBaseURI().value;
    }
    /// @notice Sets the Base URI for computing {tokenURI}. It does not expect the ending slash in provided string.
    /// @dev If NFTDescriptor address isn't set the `baseURI` would be used for generating erc721 tokenURI. In case
    ///  NFTDescriptor address is set it would be used as a first-priority method.
    function setBaseURI(string calldata _baseURI) external onlyRole(MANAGE_TOKEN_URI_ROLE) {
        _getBaseURI().value = _baseURI;
        emit BaseURISet(_baseURI);
    }
    /// @notice Address of NFTDescriptor contract that is responsible for tokenURI generation.
    function getNFTDescriptorAddress() external view returns (address) {
        return NFT_DESCRIPTOR_ADDRESS_POSITION.getStorageAddress();
    }
    /// @notice Sets the address of NFTDescriptor contract that is responsible for tokenURI generation.
    /// @dev If NFTDescriptor address isn't set the `baseURI` would be used for generating erc721 tokenURI. In case
    ///  NFTDescriptor address is set it would be used as a first-priority method.
    function setNFTDescriptorAddress(address _nftDescriptorAddress) external onlyRole(MANAGE_TOKEN_URI_ROLE) {
        NFT_DESCRIPTOR_ADDRESS_POSITION.setStorageAddress(_nftDescriptorAddress);
        emit NftDescriptorAddressSet(_nftDescriptorAddress);
    }
    /// @notice Finalize requests from last finalized one up to `_lastRequestIdToBeFinalized`
    /// @dev ether to finalize all the requests should be calculated using `prefinalize()` and sent along
    function finalize(uint256 _lastRequestIdToBeFinalized, uint256 _maxShareRate) external payable {
        _checkResumed();
        _checkRole(FINALIZE_ROLE, msg.sender);
        uint256 firstFinalizedRequestId = getLastFinalizedRequestId() + 1;
        _finalize(_lastRequestIdToBeFinalized, msg.value, _maxShareRate);
        // ERC4906 metadata update event
        // We are updating all unfinalized to make it look different as they move closer to finalization in the future
        emit BatchMetadataUpdate(firstFinalizedRequestId, getLastRequestId());
    }
    /// @dev See {IERC721-balanceOf}.
    function balanceOf(address _owner) external view override returns (uint256) {
        if (_owner == address(0)) revert InvalidOwnerAddress(_owner);
        return _getRequestsByOwner()[_owner].length();
    }
    /// @dev See {IERC721-ownerOf}.
    function ownerOf(uint256 _requestId) public view override returns (address) {
        if (_requestId == 0 || _requestId > getLastRequestId()) revert InvalidRequestId(_requestId);
        WithdrawalRequest storage request = _getQueue()[_requestId];
        if (request.claimed) revert RequestAlreadyClaimed(_requestId);
        return request.owner;
    }
    /// @dev See {IERC721-approve}.
    function approve(address _to, uint256 _requestId) external override {
        address owner = ownerOf(_requestId);
        if (_to == owner) revert ApprovalToOwner();
        if (msg.sender != owner && !isApprovedForAll(owner, msg.sender)) revert NotOwnerOrApprovedForAll(msg.sender);
        _approve(_to, _requestId);
    }
    /// @dev See {IERC721-getApproved}.
    function getApproved(uint256 _requestId) external view override returns (address) {
        if (!_existsAndNotClaimed(_requestId)) revert InvalidRequestId(_requestId);
        return _getTokenApprovals()[_requestId];
    }
    /// @dev See {IERC721-setApprovalForAll}.
    function setApprovalForAll(address _operator, bool _approved) external override {
        _setApprovalForAll(msg.sender, _operator, _approved);
    }
    /// @dev See {IERC721-isApprovedForAll}.
    function isApprovedForAll(address _owner, address _operator) public view override returns (bool) {
        return _getOperatorApprovals()[_owner][_operator];
    }
    /// @dev See {IERC721-safeTransferFrom}.
    function safeTransferFrom(address _from, address _to, uint256 _requestId) external override {
        safeTransferFrom(_from, _to, _requestId, "");
    }
    /// @dev See {IERC721-safeTransferFrom}.
    function safeTransferFrom(address _from, address _to, uint256 _requestId, bytes memory _data) public override {
        _transfer(_from, _to, _requestId);
        if (!_checkOnERC721Received(_from, _to, _requestId, _data)) {
            revert TransferToNonIERC721Receiver(_to);
        }
    }
    /// @dev See {IERC721-transferFrom}.
    function transferFrom(address _from, address _to, uint256 _requestId) external override {
        _transfer(_from, _to, _requestId);
    }
    /// @dev Transfers `_requestId` from `_from` to `_to`.
    ///  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
    ///
    /// Requirements:
    ///
    /// - `_to` cannot be the zero address.
    /// - `_requestId` request must not be claimed and be owned by `_from`.
    /// - `msg.sender` should be approved, or approved for all, or owner
    function _transfer(address _from, address _to, uint256 _requestId) internal {
        if (_to == address(0)) revert TransferToZeroAddress();
        if (_to == _from) revert TransferToThemselves();
        if (_requestId == 0 || _requestId > getLastRequestId()) revert InvalidRequestId(_requestId);
        WithdrawalRequest storage request = _getQueue()[_requestId];
        if (request.claimed) revert RequestAlreadyClaimed(_requestId);
        if (_from != request.owner) revert TransferFromIncorrectOwner(_from, request.owner);
        // here and below we are sure that `_from` is the owner of the request
        address msgSender = msg.sender;
        if (
            !(_from == msgSender || isApprovedForAll(_from, msgSender) || _getTokenApprovals()[_requestId] == msgSender)
        ) {
            revert NotOwnerOrApproved(msgSender);
        }
        delete _getTokenApprovals()[_requestId];
        request.owner = _to;
        assert(_getRequestsByOwner()[_from].remove(_requestId));
        assert(_getRequestsByOwner()[_to].add(_requestId));
        _emitTransfer(_from, _to, _requestId);
    }
    /// @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
    /// The call is not executed if the target address is not a contract.
    ///
    /// @param _from address representing the previous owner of the given token ID
    /// @param _to target address that will receive the tokens
    /// @param _requestId uint256 ID of the token to be transferred
    /// @param _data bytes optional data to send along with the call
    /// @return bool whether the call correctly returned the expected magic value
    function _checkOnERC721Received(address _from, address _to, uint256 _requestId, bytes memory _data)
        private
        returns (bool)
    {
        if (_to.isContract()) {
            try IERC721Receiver(_to).onERC721Received(msg.sender, _from, _requestId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert TransferToNonIERC721Receiver(_to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }
    //
    // Internal getters and setters
    //
    /// @dev a little crutch to emit { Transfer } on request and on claim like ERC721 states
    function _emitTransfer(address _from, address _to, uint256 _requestId) internal override {
        emit Transfer(_from, _to, _requestId);
    }
    /// @dev Returns whether `_requestId` exists and not claimed.
    function _existsAndNotClaimed(uint256 _requestId) internal view returns (bool) {
        return _requestId > 0 && _requestId <= getLastRequestId() && !_getQueue()[_requestId].claimed;
    }
    /// @dev Approve `_to` to operate on `_requestId`
    /// Emits a { Approval } event.
    function _approve(address _to, uint256 _requestId) internal {
        _getTokenApprovals()[_requestId] = _to;
        emit Approval(ownerOf(_requestId), _to, _requestId);
    }
    /// @dev Approve `operator` to operate on all of `owner` tokens
    /// Emits a { ApprovalForAll } event.
    function _setApprovalForAll(address _owner, address _operator, bool _approved) internal {
        if (_owner == _operator) revert ApproveToCaller();
        _getOperatorApprovals()[_owner][_operator] = _approved;
        emit ApprovalForAll(_owner, _operator, _approved);
    }
    /// @dev Decode a `bytes32 to string
    function _toString(bytes32 _sstr) internal pure returns (string memory) {
        uint256 len = _length(_sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), _sstr)
        }
        return str;
    }
    /// @dev encodes string `_str` in bytes32. Reverts if the string length > 31
    function _toBytes32(string memory _str) internal pure returns (bytes32) {
        bytes memory bstr = bytes(_str);
        if (bstr.length > 31) {
            revert StringTooLong(_str);
        }
        return bytes32(uint256(bytes32(bstr)) | bstr.length);
    }
    /// @dev Return the length of a string encoded in bytes32
    function _length(bytes32 _sstr) internal pure returns (uint256) {
        return uint256(_sstr) & 0xFF;
    }
    function _getTokenApprovals() internal pure returns (mapping(uint256 => address) storage) {
        return TOKEN_APPROVALS_POSITION.storageMapUint256Address();
    }
    function _getOperatorApprovals() internal pure returns (mapping(address => mapping(address => bool)) storage) {
        return OPERATOR_APPROVALS_POSITION.storageMapAddressMapAddressBool();
    }
    function _getBaseURI() internal pure returns (BaseURI storage baseURI) {
        bytes32 position = BASE_URI_POSITION;
        assembly {
            baseURI.slot := position
        }
    }
    function _constructTokenUri(uint256 _requestId) internal view returns (string memory) {
        string memory baseURI = _getBaseURI().value;
        if (bytes(baseURI).length == 0) return "";
        // ${baseUri}/${_requestId}?requested=${amount}&created_at=${timestamp}[&finalized=${claimableAmount}]
        string memory uri = string(
            // we have no string.concat in 0.8.9 yet, so we have to do it with bytes.concat
            bytes.concat(
                bytes(baseURI),
                bytes("/"),
                bytes(_requestId.toString()),
                bytes("?requested="),
                bytes(
                    uint256(_getQueue()[_requestId].cumulativeStETH - _getQueue()[_requestId - 1].cumulativeStETH)
                        .toString()
                ),
                bytes("&created_at="),
                bytes(uint256(_getQueue()[_requestId].timestamp).toString())
            )
        );
        bool finalized = _requestId <= getLastFinalizedRequestId();
        if (finalized) {
            uri = string(
                bytes.concat(
                    bytes(uri),
                    bytes("&finalized="),
                    bytes(
                        _getClaimableEther(_requestId, _findCheckpointHint(_requestId, 1, getLastCheckpointIndex()))
                            .toString()
                    )
                )
            );
        }
        return uri;
    }
}

// File: contracts/common/UnstructuredStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }

    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }

    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }

    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }

    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}

// File: contracts/acl/IACL.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IACL {
    function initialize(address permissionsCreator) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}

// File: contracts/common/IVaultRecoverable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);

    function transferToVault(address token) external;

    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}

// File: contracts/kernel/IKernel.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}


// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);

    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}

// File: contracts/apps/AppStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




contract AppStorage {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;

    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }

    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }

    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }

    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}

// File: contracts/common/IsContract.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }

        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}

// File: contracts/lib/misc/ERCProxy.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract ERCProxy {
    uint256 internal constant FORWARDING = 1;
    uint256 internal constant UPGRADEABLE = 2;

    function proxyType() public pure returns (uint256 proxyTypeId);
    function implementation() public view returns (address codeAddr);
}

// File: contracts/common/DelegateProxy.sol

pragma solidity 0.4.24;




contract DelegateProxy is ERCProxy, IsContract {
    uint256 internal constant FWD_GAS_LIMIT = 10000;

    /**
    * @dev Performs a delegatecall and returns whatever the delegatecall returned (entire context execution will return!)
    * @param _dst Destination address to perform the delegatecall
    * @param _calldata Calldata for the delegatecall
    */
    function delegatedFwd(address _dst, bytes _calldata) internal {
        require(isContract(_dst));
        uint256 fwdGasLimit = FWD_GAS_LIMIT;

        assembly {
            let result := delegatecall(sub(gas, fwdGasLimit), _dst, add(_calldata, 0x20), mload(_calldata), 0, 0)
            let size := returndatasize
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, size)

            // revert instead of invalid() bc if the underlying call failed with invalid() it already wasted gas.
            // if the call returned error data, forward it
            switch result case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

// File: contracts/common/DepositableStorage.sol

pragma solidity 0.4.24;



contract DepositableStorage {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.depositableStorage.depositable")
    bytes32 internal constant DEPOSITABLE_POSITION = 0x665fd576fbbe6f247aff98f5c94a561e3f71ec2d3c988d56f12d342396c50cea;

    function isDepositable() public view returns (bool) {
        return DEPOSITABLE_POSITION.getStorageBool();
    }

    function setDepositable(bool _depositable) internal {
        DEPOSITABLE_POSITION.setStorageBool(_depositable);
    }
}

// File: contracts/common/DepositableDelegateProxy.sol

pragma solidity 0.4.24;




contract DepositableDelegateProxy is DepositableStorage, DelegateProxy {
    event ProxyDeposit(address sender, uint256 value);

    function () external payable {
        uint256 forwardGasThreshold = FWD_GAS_LIMIT;
        bytes32 isDepositablePosition = DEPOSITABLE_POSITION;

        // Optimized assembly implementation to prevent EIP-1884 from breaking deposits, reference code in Solidity:
        // https://github.com/aragon/aragonOS/blob/v4.2.1/contracts/common/DepositableDelegateProxy.sol#L10-L20
        assembly {
            // Continue only if the gas left is lower than the threshold for forwarding to the implementation code,
            // otherwise continue outside of the assembly block.
            if lt(gas, forwardGasThreshold) {
                // Only accept the deposit and emit an event if all of the following are true:
                // the proxy accepts deposits (isDepositable), msg.data.length == 0, and msg.value > 0
                if and(and(sload(isDepositablePosition), iszero(calldatasize)), gt(callvalue, 0)) {
                    // Equivalent Solidity code for emitting the event:
                    // emit ProxyDeposit(msg.sender, msg.value);

                    let logData := mload(0x40) // free memory pointer
                    mstore(logData, caller) // add 'msg.sender' to the log data (first event param)
                    mstore(add(logData, 0x20), callvalue) // add 'msg.value' to the log data (second event param)

                    // Emit an event with one topic to identify the event: keccak256('ProxyDeposit(address,uint256)') = 0x15ee...dee1
                    log1(logData, 0x40, 0x15eeaa57c7bd188c1388020bcadc2c436ec60d647d36ef5b9eb3c742217ddee1)

                    stop() // Stop. Exits execution context
                }

                // If any of above checks failed, revert the execution (if ETH was sent, it is returned to the sender)
                revert(0, 0)
            }
        }

        address target = implementation();
        delegatedFwd(target, msg.data);
    }
}

// File: contracts/kernel/KernelConstants.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}


contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}

// File: contracts/apps/AppProxyBase.sol

pragma solidity 0.4.24;






contract AppProxyBase is AppStorage, DepositableDelegateProxy, KernelNamespaceConstants {
    /**
    * @dev Initialize AppProxy
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public {
        setKernel(_kernel);
        setAppId(_appId);

        // Implicit check that kernel is actually a Kernel
        // The EVM doesn't actually provide a way for us to make sure, but we can force a revert to
        // occur if the kernel is set to 0x0 or a non-code address when we try to call a method on
        // it.
        address appCode = getAppBase(_appId);

        // If initialize payload is provided, it will be executed
        if (_initializePayload.length > 0) {
            require(isContract(appCode));
            // Cannot make delegatecall as a delegateproxy.delegatedFwd as it
            // returns ending execution context and halts contract deployment
            require(appCode.delegatecall(_initializePayload));
        }
    }

    function getAppBase(bytes32 _appId) internal view returns (address) {
        return kernel().getApp(KERNEL_APP_BASES_NAMESPACE, _appId);
    }
}

// File: contracts/apps/AppProxyUpgradeable.sol

pragma solidity 0.4.24;



contract AppProxyUpgradeable is AppProxyBase {
    /**
    * @dev Initialize AppProxyUpgradeable (makes it an upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        // solium-disable-previous-line no-empty-blocks
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return getAppBase(appId());
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }
}

/**
 *Submitted for verification at Etherscan.io on 2020-02-06
*/

// File: contracts/acl/IACL.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IACL {
    function initialize(address permissionsCreator) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}

// File: contracts/common/IVaultRecoverable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);

    function transferToVault(address token) external;

    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}

// File: contracts/kernel/IKernel.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}


// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);

    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}

// File: contracts/kernel/KernelConstants.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}


contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}

// File: contracts/kernel/KernelStorage.sol

pragma solidity 0.4.24;


contract KernelStorage {
    // namespace => app id => address
    mapping (bytes32 => mapping (bytes32 => address)) public apps;
    bytes32 public recoveryVaultAppId;
}

// File: contracts/acl/ACLSyntaxSugar.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract ACLSyntaxSugar {
    function arr() internal pure returns (uint256[]) {
        return new uint256[](0);
    }

    function arr(bytes32 _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(bytes32 _a, bytes32 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(address _a, address _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c);
    }

    function arr(address _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c, _d);
    }

    function arr(address _a, uint256 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, address _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), _c, _d, _e);
    }

    function arr(address _a, address _b, address _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(address _a, address _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(uint256 _a) internal pure returns (uint256[] r) {
        r = new uint256[](1);
        r[0] = _a;
    }

    function arr(uint256 _a, uint256 _b) internal pure returns (uint256[] r) {
        r = new uint256[](2);
        r[0] = _a;
        r[1] = _b;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        r = new uint256[](3);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        r = new uint256[](4);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        r = new uint256[](5);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
        r[4] = _e;
    }
}


contract ACLHelpers {
    function decodeParamOp(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 30));
    }

    function decodeParamId(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 31));
    }

    function decodeParamsList(uint256 _x) internal pure returns (uint32 a, uint32 b, uint32 c) {
        a = uint32(_x);
        b = uint32(_x >> (8 * 4));
        c = uint32(_x >> (8 * 8));
    }
}

// File: contracts/common/ConversionHelpers.sol

pragma solidity ^0.4.24;


library ConversionHelpers {
    string private constant ERROR_IMPROPER_LENGTH = "CONVERSION_IMPROPER_LENGTH";

    function dangerouslyCastUintArrayToBytes(uint256[] memory _input) internal pure returns (bytes memory output) {
        // Force cast the uint256[] into a bytes array, by overwriting its length
        // Note that the bytes array doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 byteLength = _input.length * 32;
        assembly {
            output := _input
            mstore(output, byteLength)
        }
    }

    function dangerouslyCastBytesToUintArray(bytes memory _input) internal pure returns (uint256[] memory output) {
        // Force cast the bytes array into a uint256[], by overwriting its length
        // Note that the uint256[] doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 intsLength = _input.length / 32;
        require(_input.length == intsLength * 32, ERROR_IMPROPER_LENGTH);

        assembly {
            output := _input
            mstore(output, intsLength)
        }
    }
}

// File: contracts/common/IsContract.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }

        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}

// File: contracts/common/Uint256Helpers.sol

pragma solidity ^0.4.24;


library Uint256Helpers {
    uint256 private constant MAX_UINT64 = uint64(-1);

    string private constant ERROR_NUMBER_TOO_BIG = "UINT64_NUMBER_TOO_BIG";

    function toUint64(uint256 a) internal pure returns (uint64) {
        require(a <= MAX_UINT64, ERROR_NUMBER_TOO_BIG);
        return uint64(a);
    }
}

// File: contracts/common/TimeHelpers.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract TimeHelpers {
    using Uint256Helpers for uint256;

    /**
    * @dev Returns the current block number.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }

    /**
    * @dev Returns the current block number, converted to uint64.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber64() internal view returns (uint64) {
        return getBlockNumber().toUint64();
    }

    /**
    * @dev Returns the current timestamp.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp() internal view returns (uint256) {
        return block.timestamp; // solium-disable-line security/no-block-members
    }

    /**
    * @dev Returns the current timestamp, converted to uint64.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp64() internal view returns (uint64) {
        return getTimestamp().toUint64();
    }
}

// File: contracts/common/UnstructuredStorage.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }

    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }

    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }

    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }

    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}

// File: contracts/common/Initializable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




contract Initializable is TimeHelpers {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.initializable.initializationBlock")
    bytes32 internal constant INITIALIZATION_BLOCK_POSITION = 0xebb05b386a8d34882b8711d156f463690983dc47815980fb82aeeff1aa43579e;

    string private constant ERROR_ALREADY_INITIALIZED = "INIT_ALREADY_INITIALIZED";
    string private constant ERROR_NOT_INITIALIZED = "INIT_NOT_INITIALIZED";

    modifier onlyInit {
        require(getInitializationBlock() == 0, ERROR_ALREADY_INITIALIZED);
        _;
    }

    modifier isInitialized {
        require(hasInitialized(), ERROR_NOT_INITIALIZED);
        _;
    }

    /**
    * @return Block number in which the contract was initialized
    */
    function getInitializationBlock() public view returns (uint256) {
        return INITIALIZATION_BLOCK_POSITION.getStorageUint256();
    }

    /**
    * @return Whether the contract has been initialized by the time of the current block
    */
    function hasInitialized() public view returns (bool) {
        uint256 initializationBlock = getInitializationBlock();
        return initializationBlock != 0 && getBlockNumber() >= initializationBlock;
    }

    /**
    * @dev Function to be called by top level contract after initialization has finished.
    */
    function initialized() internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(getBlockNumber());
    }

    /**
    * @dev Function to be called by top level contract after initialization to enable the contract
    *      at a future block number rather than immediately.
    */
    function initializedAt(uint256 _blockNumber) internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(_blockNumber);
    }
}

// File: contracts/common/Petrifiable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract Petrifiable is Initializable {
    // Use block UINT256_MAX (which should be never) as the initializable date
    uint256 internal constant PETRIFIED_BLOCK = uint256(-1);

    function isPetrified() public view returns (bool) {
        return getInitializationBlock() == PETRIFIED_BLOCK;
    }

    /**
    * @dev Function to be called by top level contract to prevent being initialized.
    *      Useful for freezing base contracts when they're used behind proxies.
    */
    function petrify() internal onlyInit {
        initializedAt(PETRIFIED_BLOCK);
    }
}

// File: contracts/lib/token/ERC20.sol

// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/a9f910d34f0ab33a1ae5e714f69f9596a02b4d91/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.4.24;


/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function totalSupply() public view returns (uint256);

    function balanceOf(address _who) public view returns (uint256);

    function allowance(address _owner, address _spender)
        public view returns (uint256);

    function transfer(address _to, uint256 _value) public returns (bool);

    function approve(address _spender, uint256 _value)
        public returns (bool);

    function transferFrom(address _from, address _to, uint256 _value)
        public returns (bool);

    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );

    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: contracts/common/EtherTokenConstant.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


// aragonOS and aragon-apps rely on address(0) to denote native ETH, in
// contracts where both tokens and ETH are accepted
contract EtherTokenConstant {
    address internal constant ETH = address(0);
}

// File: contracts/common/SafeERC20.sol

// Inspired by AdEx (https://github.com/AdExNetwork/adex-protocol-eth/blob/b9df617829661a7518ee10f4cb6c4108659dd6d5/contracts/libs/SafeERC20.sol)
// and 0x (https://github.com/0xProject/0x-monorepo/blob/737d1dc54d72872e24abce5a1dbe1b66d35fa21a/contracts/protocol/contracts/protocol/AssetProxy/ERC20Proxy.sol#L143)

pragma solidity ^0.4.24;



library SafeERC20 {
    // Before 0.5, solidity has a mismatch between `address.transfer()` and `token.transfer()`:
    // https://github.com/ethereum/solidity/issues/3544
    bytes4 private constant TRANSFER_SELECTOR = 0xa9059cbb;

    string private constant ERROR_TOKEN_BALANCE_REVERTED = "SAFE_ERC_20_BALANCE_REVERTED";
    string private constant ERROR_TOKEN_ALLOWANCE_REVERTED = "SAFE_ERC_20_ALLOWANCE_REVERTED";

    function invokeAndCheckSuccess(address _addr, bytes memory _calldata)
        private
        returns (bool)
    {
        bool ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            let success := call(
                gas,                  // forward all gas
                _addr,                // address
                0,                    // no value
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                // Check number of bytes returned from last function call
                switch returndatasize

                // No bytes returned: assume success
                case 0 {
                    ret := 1
                }

                // 32 bytes returned: check if non-zero
                case 0x20 {
                    // Only return success if returned data was true
                    // Already have output in ptr
                    ret := eq(mload(ptr), 1)
                }

                // Not sure what was returned: don't mark as success
                default { }
            }
        }
        return ret;
    }

    function staticInvoke(address _addr, bytes memory _calldata)
        private
        view
        returns (bool, uint256)
    {
        bool success;
        uint256 ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            success := staticcall(
                gas,                  // forward all gas
                _addr,                // address
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                ret := mload(ptr)
            }
        }
        return (success, ret);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transfer() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransfer(ERC20 _token, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferCallData = abi.encodeWithSelector(
            TRANSFER_SELECTOR,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transferFrom() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransferFrom(ERC20 _token, address _from, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferFromCallData = abi.encodeWithSelector(
            _token.transferFrom.selector,
            _from,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferFromCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.approve() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeApprove(ERC20 _token, address _spender, uint256 _amount) internal returns (bool) {
        bytes memory approveCallData = abi.encodeWithSelector(
            _token.approve.selector,
            _spender,
            _amount
        );
        return invokeAndCheckSuccess(_token, approveCallData);
    }

    /**
    * @dev Static call into ERC20.balanceOf().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticBalanceOf(ERC20 _token, address _owner) internal view returns (uint256) {
        bytes memory balanceOfCallData = abi.encodeWithSelector(
            _token.balanceOf.selector,
            _owner
        );

        (bool success, uint256 tokenBalance) = staticInvoke(_token, balanceOfCallData);
        require(success, ERROR_TOKEN_BALANCE_REVERTED);

        return tokenBalance;
    }

    /**
    * @dev Static call into ERC20.allowance().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticAllowance(ERC20 _token, address _owner, address _spender) internal view returns (uint256) {
        bytes memory allowanceCallData = abi.encodeWithSelector(
            _token.allowance.selector,
            _owner,
            _spender
        );

        (bool success, uint256 allowance) = staticInvoke(_token, allowanceCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return allowance;
    }

    /**
    * @dev Static call into ERC20.totalSupply().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticTotalSupply(ERC20 _token) internal view returns (uint256) {
        bytes memory totalSupplyCallData = abi.encodeWithSelector(_token.totalSupply.selector);

        (bool success, uint256 totalSupply) = staticInvoke(_token, totalSupplyCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return totalSupply;
    }
}

// File: contracts/common/VaultRecoverable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;







contract VaultRecoverable is IVaultRecoverable, EtherTokenConstant, IsContract {
    using SafeERC20 for ERC20;

    string private constant ERROR_DISALLOWED = "RECOVER_DISALLOWED";
    string private constant ERROR_VAULT_NOT_CONTRACT = "RECOVER_VAULT_NOT_CONTRACT";
    string private constant ERROR_TOKEN_TRANSFER_FAILED = "RECOVER_TOKEN_TRANSFER_FAILED";

    /**
     * @notice Send funds to recovery Vault. This contract should never receive funds,
     *         but in case it does, this function allows one to recover them.
     * @param _token Token balance to be sent to recovery vault.
     */
    function transferToVault(address _token) external {
        require(allowRecoverability(_token), ERROR_DISALLOWED);
        address vault = getRecoveryVault();
        require(isContract(vault), ERROR_VAULT_NOT_CONTRACT);

        uint256 balance;
        if (_token == ETH) {
            balance = address(this).balance;
            vault.transfer(balance);
        } else {
            ERC20 token = ERC20(_token);
            balance = token.staticBalanceOf(this);
            require(token.safeTransfer(vault, balance), ERROR_TOKEN_TRANSFER_FAILED);
        }

        emit RecoverToVault(vault, _token, balance);
    }

    /**
    * @dev By default deriving from AragonApp makes it recoverable
    * @param token Token address that would be recovered
    * @return bool whether the app allows the recovery
    */
    function allowRecoverability(address token) public view returns (bool) {
        return true;
    }

    // Cast non-implemented interface to be public so we can use it internally
    function getRecoveryVault() public view returns (address);
}

// File: contracts/apps/AppStorage.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




contract AppStorage {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;

    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }

    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }

    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }

    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}

// File: contracts/lib/misc/ERCProxy.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract ERCProxy {
    uint256 internal constant FORWARDING = 1;
    uint256 internal constant UPGRADEABLE = 2;

    function proxyType() public pure returns (uint256 proxyTypeId);
    function implementation() public view returns (address codeAddr);
}

// File: contracts/common/DelegateProxy.sol

pragma solidity 0.4.24;




contract DelegateProxy is ERCProxy, IsContract {
    uint256 internal constant FWD_GAS_LIMIT = 10000;

    /**
    * @dev Performs a delegatecall and returns whatever the delegatecall returned (entire context execution will return!)
    * @param _dst Destination address to perform the delegatecall
    * @param _calldata Calldata for the delegatecall
    */
    function delegatedFwd(address _dst, bytes _calldata) internal {
        require(isContract(_dst));
        uint256 fwdGasLimit = FWD_GAS_LIMIT;

        assembly {
            let result := delegatecall(sub(gas, fwdGasLimit), _dst, add(_calldata, 0x20), mload(_calldata), 0, 0)
            let size := returndatasize
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, size)

            // revert instead of invalid() bc if the underlying call failed with invalid() it already wasted gas.
            // if the call returned error data, forward it
            switch result case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

// File: contracts/common/DepositableStorage.sol

pragma solidity 0.4.24;



contract DepositableStorage {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.depositableStorage.depositable")
    bytes32 internal constant DEPOSITABLE_POSITION = 0x665fd576fbbe6f247aff98f5c94a561e3f71ec2d3c988d56f12d342396c50cea;

    function isDepositable() public view returns (bool) {
        return DEPOSITABLE_POSITION.getStorageBool();
    }

    function setDepositable(bool _depositable) internal {
        DEPOSITABLE_POSITION.setStorageBool(_depositable);
    }
}

// File: contracts/common/DepositableDelegateProxy.sol

pragma solidity 0.4.24;




contract DepositableDelegateProxy is DepositableStorage, DelegateProxy {
    event ProxyDeposit(address sender, uint256 value);

    function () external payable {
        uint256 forwardGasThreshold = FWD_GAS_LIMIT;
        bytes32 isDepositablePosition = DEPOSITABLE_POSITION;

        // Optimized assembly implementation to prevent EIP-1884 from breaking deposits, reference code in Solidity:
        // https://github.com/aragon/aragonOS/blob/v4.2.1/contracts/common/DepositableDelegateProxy.sol#L10-L20
        assembly {
            // Continue only if the gas left is lower than the threshold for forwarding to the implementation code,
            // otherwise continue outside of the assembly block.
            if lt(gas, forwardGasThreshold) {
                // Only accept the deposit and emit an event if all of the following are true:
                // the proxy accepts deposits (isDepositable), msg.data.length == 0, and msg.value > 0
                if and(and(sload(isDepositablePosition), iszero(calldatasize)), gt(callvalue, 0)) {
                    // Equivalent Solidity code for emitting the event:
                    // emit ProxyDeposit(msg.sender, msg.value);

                    let logData := mload(0x40) // free memory pointer
                    mstore(logData, caller) // add 'msg.sender' to the log data (first event param)
                    mstore(add(logData, 0x20), callvalue) // add 'msg.value' to the log data (second event param)

                    // Emit an event with one topic to identify the event: keccak256('ProxyDeposit(address,uint256)') = 0x15ee...dee1
                    log1(logData, 0x40, 0x15eeaa57c7bd188c1388020bcadc2c436ec60d647d36ef5b9eb3c742217ddee1)

                    stop() // Stop. Exits execution context
                }

                // If any of above checks failed, revert the execution (if ETH was sent, it is returned to the sender)
                revert(0, 0)
            }
        }

        address target = implementation();
        delegatedFwd(target, msg.data);
    }
}

// File: contracts/apps/AppProxyBase.sol

pragma solidity 0.4.24;






contract AppProxyBase is AppStorage, DepositableDelegateProxy, KernelNamespaceConstants {
    /**
    * @dev Initialize AppProxy
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public {
        setKernel(_kernel);
        setAppId(_appId);

        // Implicit check that kernel is actually a Kernel
        // The EVM doesn't actually provide a way for us to make sure, but we can force a revert to
        // occur if the kernel is set to 0x0 or a non-code address when we try to call a method on
        // it.
        address appCode = getAppBase(_appId);

        // If initialize payload is provided, it will be executed
        if (_initializePayload.length > 0) {
            require(isContract(appCode));
            // Cannot make delegatecall as a delegateproxy.delegatedFwd as it
            // returns ending execution context and halts contract deployment
            require(appCode.delegatecall(_initializePayload));
        }
    }

    function getAppBase(bytes32 _appId) internal view returns (address) {
        return kernel().getApp(KERNEL_APP_BASES_NAMESPACE, _appId);
    }
}

// File: contracts/apps/AppProxyUpgradeable.sol

pragma solidity 0.4.24;



contract AppProxyUpgradeable is AppProxyBase {
    /**
    * @dev Initialize AppProxyUpgradeable (makes it an upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        // solium-disable-previous-line no-empty-blocks
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return getAppBase(appId());
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }
}

// File: contracts/apps/AppProxyPinned.sol

pragma solidity 0.4.24;





contract AppProxyPinned is IsContract, AppProxyBase {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.appStorage.pinnedCode")
    bytes32 internal constant PINNED_CODE_POSITION = 0xdee64df20d65e53d7f51cb6ab6d921a0a6a638a91e942e1d8d02df28e31c038e;

    /**
    * @dev Initialize AppProxyPinned (makes it an un-upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        setPinnedCode(getAppBase(_appId));
        require(isContract(pinnedCode()));
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return pinnedCode();
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return FORWARDING;
    }

    function setPinnedCode(address _pinnedCode) internal {
        PINNED_CODE_POSITION.setStorageAddress(_pinnedCode);
    }

    function pinnedCode() internal view returns (address) {
        return PINNED_CODE_POSITION.getStorageAddress();
    }
}

// File: contracts/factory/AppProxyFactory.sol

pragma solidity 0.4.24;




contract AppProxyFactory {
    event NewAppProxy(address proxy, bool isUpgradeable, bytes32 appId);

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId) public returns (AppProxyUpgradeable) {
        return newAppProxy(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyUpgradeable) {
        AppProxyUpgradeable proxy = new AppProxyUpgradeable(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), true, _appId);
        return proxy;
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId) public returns (AppProxyPinned) {
        return newAppProxyPinned(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @param _initializePayload Proxy initialization payload
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyPinned) {
        AppProxyPinned proxy = new AppProxyPinned(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), false, _appId);
        return proxy;
    }
}

// File: contracts/kernel/Kernel.sol

pragma solidity 0.4.24;













// solium-disable-next-line max-len
contract Kernel is IKernel, KernelStorage, KernelAppIds, KernelNamespaceConstants, Petrifiable, IsContract, VaultRecoverable, AppProxyFactory, ACLSyntaxSugar {
    /* Hardcoded constants to save gas
    bytes32 public constant APP_MANAGER_ROLE = keccak256("APP_MANAGER_ROLE");
    */
    bytes32 public constant APP_MANAGER_ROLE = 0xb6d92708f3d4817afc106147d969e229ced5c46e65e0a5002a0d391287762bd0;

    string private constant ERROR_APP_NOT_CONTRACT = "KERNEL_APP_NOT_CONTRACT";
    string private constant ERROR_INVALID_APP_CHANGE = "KERNEL_INVALID_APP_CHANGE";
    string private constant ERROR_AUTH_FAILED = "KERNEL_AUTH_FAILED";

    /**
    * @dev Constructor that allows the deployer to choose if the base instance should be petrified immediately.
    * @param _shouldPetrify Immediately petrify this instance so that it can never be initialized
    */
    constructor(bool _shouldPetrify) public {
        if (_shouldPetrify) {
            petrify();
        }
    }

    /**
    * @dev Initialize can only be called once. It saves the block number in which it was initialized.
    * @notice Initialize this kernel instance along with its ACL and set `_permissionsCreator` as the entity that can create other permissions
    * @param _baseAcl Address of base ACL app
    * @param _permissionsCreator Entity that will be given permission over createPermission
    */
    function initialize(IACL _baseAcl, address _permissionsCreator) public onlyInit {
        initialized();

        // Set ACL base
        _setApp(KERNEL_APP_BASES_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, _baseAcl);

        // Create ACL instance and attach it as the default ACL app
        IACL acl = IACL(newAppProxy(this, KERNEL_DEFAULT_ACL_APP_ID));
        acl.initialize(_permissionsCreator);
        _setApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, acl);

        recoveryVaultAppId = KERNEL_DEFAULT_VAULT_APP_ID;
    }

    /**
    * @dev Create a new instance of an app linked to this kernel
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new instance of an app linked to this kernel and set its base
    *      implementation if it was not already set
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxy(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`.
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newPinnedAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel and set
    *      its base implementation if it was not already set
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxyPinned(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Set the resolving address of an app instance or base implementation
    * @notice Set the resolving address of `_appId` in namespace `_namespace` to `_app`
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @param _app Address of the app instance or base implementation
    * @return ID of app
    */
    function setApp(bytes32 _namespace, bytes32 _appId, address _app)
        public
        auth(APP_MANAGER_ROLE, arr(_namespace, _appId))
    {
        _setApp(_namespace, _appId, _app);
    }

    /**
    * @dev Set the default vault id for the escape hatch mechanism
    * @param _recoveryVaultAppId Identifier of the recovery vault app
    */
    function setRecoveryVaultAppId(bytes32 _recoveryVaultAppId)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_ADDR_NAMESPACE, _recoveryVaultAppId))
    {
        recoveryVaultAppId = _recoveryVaultAppId;
    }

    // External access to default app id and namespace constants to mimic default getters for constants
    /* solium-disable function-order, mixedcase */
    function CORE_NAMESPACE() external pure returns (bytes32) { return KERNEL_CORE_NAMESPACE; }
    function APP_BASES_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_BASES_NAMESPACE; }
    function APP_ADDR_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_ADDR_NAMESPACE; }
    function KERNEL_APP_ID() external pure returns (bytes32) { return KERNEL_CORE_APP_ID; }
    function DEFAULT_ACL_APP_ID() external pure returns (bytes32) { return KERNEL_DEFAULT_ACL_APP_ID; }
    /* solium-enable function-order, mixedcase */

    /**
    * @dev Get the address of an app instance or base implementation
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @return Address of the app
    */
    function getApp(bytes32 _namespace, bytes32 _appId) public view returns (address) {
        return apps[_namespace][_appId];
    }

    /**
    * @dev Get the address of the recovery Vault instance (to recover funds)
    * @return Address of the Vault
    */
    function getRecoveryVault() public view returns (address) {
        return apps[KERNEL_APP_ADDR_NAMESPACE][recoveryVaultAppId];
    }

    /**
    * @dev Get the installed ACL app
    * @return ACL app
    */
    function acl() public view returns (IACL) {
        return IACL(getApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID));
    }

    /**
    * @dev Function called by apps to check ACL on kernel or to check permission status
    * @param _who Sender of the original call
    * @param _where Address of the app
    * @param _what Identifier for a group of actions in app
    * @param _how Extra data for ACL auth
    * @return Boolean indicating whether the ACL allows the role or not.
    *         Always returns false if the kernel hasn't been initialized yet.
    */
    function hasPermission(address _who, address _where, bytes32 _what, bytes _how) public view returns (bool) {
        IACL defaultAcl = acl();
        return address(defaultAcl) != address(0) && // Poor man's initialization check (saves gas)
            defaultAcl.hasPermission(_who, _where, _what, _how);
    }

    function _setApp(bytes32 _namespace, bytes32 _appId, address _app) internal {
        require(isContract(_app), ERROR_APP_NOT_CONTRACT);
        apps[_namespace][_appId] = _app;
        emit SetApp(_namespace, _appId, _app);
    }

    function _setAppIfNew(bytes32 _namespace, bytes32 _appId, address _app) internal {
        address app = getApp(_namespace, _appId);
        if (app != address(0)) {
            // The only way to set an app is if it passes the isContract check, so no need to check it again
            require(app == _app, ERROR_INVALID_APP_CHANGE);
        } else {
            _setApp(_namespace, _appId, _app);
        }
    }

    modifier auth(bytes32 _role, uint256[] memory _params) {
        require(
            hasPermission(msg.sender, address(this), _role, ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)),
            ERROR_AUTH_FAILED
        );
        _;
    }
}

// File: contracts/kernel/KernelProxy.sol

pragma solidity 0.4.24;







contract KernelProxy is IKernelEvents, KernelStorage, KernelAppIds, KernelNamespaceConstants, IsContract, DepositableDelegateProxy {
    /**
    * @dev KernelProxy is a proxy contract to a kernel implementation. The implementation
    *      can update the reference, which effectively upgrades the contract
    * @param _kernelImpl Address of the contract used as implementation for kernel
    */
    constructor(IKernel _kernelImpl) public {
        require(isContract(address(_kernelImpl)));
        apps[KERNEL_CORE_NAMESPACE][KERNEL_CORE_APP_ID] = _kernelImpl;

        // Note that emitting this event is important for verifying that a KernelProxy instance
        // was never upgraded to a malicious Kernel logic contract over its lifespan.
        // This starts the "chain of trust", that can be followed through later SetApp() events
        // emitted during kernel upgrades.
        emit SetApp(KERNEL_CORE_NAMESPACE, KERNEL_CORE_APP_ID, _kernelImpl);
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }

    /**
    * @dev ERC897, the address the proxy would delegate calls to
    */
    function implementation() public view returns (address) {
        return apps[KERNEL_CORE_NAMESPACE][KERNEL_CORE_APP_ID];
    }
}

// File: contracts/common/Autopetrified.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract Autopetrified is Petrifiable {
    constructor() public {
        // Immediately petrify base (non-proxy) instances of inherited contracts on deploy.
        // This renders them uninitializable (and unusable without a proxy).
        petrify();
    }
}

// File: contracts/common/ReentrancyGuard.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract ReentrancyGuard {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant REENTRANCY_MUTEX_POSITION = keccak256("aragonOS.reentrancyGuard.mutex");
    */
    bytes32 private constant REENTRANCY_MUTEX_POSITION = 0xe855346402235fdd185c890e68d2c4ecad599b88587635ee285bce2fda58dacb;

    string private constant ERROR_REENTRANT = "REENTRANCY_REENTRANT_CALL";

    modifier nonReentrant() {
        // Ensure mutex is unlocked
        require(!REENTRANCY_MUTEX_POSITION.getStorageBool(), ERROR_REENTRANT);

        // Lock mutex before function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(true);

        // Perform function call
        _;

        // Unlock mutex after function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(false);
    }
}

// File: contracts/evmscript/IEVMScriptExecutor.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IEVMScriptExecutor {
    function execScript(bytes script, bytes input, address[] blacklist) external returns (bytes);
    function executorType() external pure returns (bytes32);
}

// File: contracts/evmscript/IEVMScriptRegistry.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract EVMScriptRegistryConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = apmNamehash("evmreg");
    */
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = 0xddbcfd564f642ab5627cf68b9b7d374fb4f8a36e941a75d89c87998cef03bd61;
}


interface IEVMScriptRegistry {
    function addScriptExecutor(IEVMScriptExecutor executor) external returns (uint id);
    function disableScriptExecutor(uint256 executorId) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function getScriptExecutor(bytes script) public view returns (IEVMScriptExecutor);
}

// File: contracts/evmscript/EVMScriptRunner.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;







contract EVMScriptRunner is AppStorage, Initializable, EVMScriptRegistryConstants, KernelNamespaceConstants {
    string private constant ERROR_EXECUTOR_UNAVAILABLE = "EVMRUN_EXECUTOR_UNAVAILABLE";
    string private constant ERROR_PROTECTED_STATE_MODIFIED = "EVMRUN_PROTECTED_STATE_MODIFIED";

    /* This is manually crafted in assembly
    string private constant ERROR_EXECUTOR_INVALID_RETURN = "EVMRUN_EXECUTOR_INVALID_RETURN";
    */

    event ScriptResult(address indexed executor, bytes script, bytes input, bytes returnData);

    function getEVMScriptExecutor(bytes _script) public view returns (IEVMScriptExecutor) {
        return IEVMScriptExecutor(getEVMScriptRegistry().getScriptExecutor(_script));
    }

    function getEVMScriptRegistry() public view returns (IEVMScriptRegistry) {
        address registryAddr = kernel().getApp(KERNEL_APP_ADDR_NAMESPACE, EVMSCRIPT_REGISTRY_APP_ID);
        return IEVMScriptRegistry(registryAddr);
    }

    function runScript(bytes _script, bytes _input, address[] _blacklist)
        internal
        isInitialized
        protectState
        returns (bytes)
    {
        IEVMScriptExecutor executor = getEVMScriptExecutor(_script);
        require(address(executor) != address(0), ERROR_EXECUTOR_UNAVAILABLE);

        bytes4 sig = executor.execScript.selector;
        bytes memory data = abi.encodeWithSelector(sig, _script, _input, _blacklist);

        bytes memory output;
        assembly {
            let success := delegatecall(
                gas,                // forward all gas
                executor,           // address
                add(data, 0x20),    // calldata start
                mload(data),        // calldata length
                0,                  // don't write output (we'll handle this ourselves)
                0                   // don't write output
            )

            output := mload(0x40) // free mem ptr get

            switch success
            case 0 {
                // If the call errored, forward its full error data
                returndatacopy(output, 0, returndatasize)
                revert(output, returndatasize)
            }
            default {
                switch gt(returndatasize, 0x3f)
                case 0 {
                    // Need at least 0x40 bytes returned for properly ABI-encoded bytes values,
                    // revert with "EVMRUN_EXECUTOR_INVALID_RETURN"
                    // See remix: doing a `revert("EVMRUN_EXECUTOR_INVALID_RETURN")` always results in
                    // this memory layout
                    mstore(output, 0x08c379a000000000000000000000000000000000000000000000000000000000)         // error identifier
                    mstore(add(output, 0x04), 0x0000000000000000000000000000000000000000000000000000000000000020) // starting offset
                    mstore(add(output, 0x24), 0x000000000000000000000000000000000000000000000000000000000000001e) // reason length
                    mstore(add(output, 0x44), 0x45564d52554e5f4558454355544f525f494e56414c49445f52455455524e0000) // reason

                    revert(output, 100) // 100 = 4 + 3 * 32 (error identifier + 3 words for the ABI encoded error)
                }
                default {
                    // Copy result
                    //
                    // Needs to perform an ABI decode for the expected `bytes` return type of
                    // `executor.execScript()` as solidity will automatically ABI encode the returned bytes as:
                    //    [ position of the first dynamic length return value = 0x20 (32 bytes) ]
                    //    [ output length (32 bytes) ]
                    //    [ output content (N bytes) ]
                    //
                    // Perform the ABI decode by ignoring the first 32 bytes of the return data
                    let copysize := sub(returndatasize, 0x20)
                    returndatacopy(output, 0x20, copysize)

                    mstore(0x40, add(output, copysize)) // free mem ptr set
                }
            }
        }

        emit ScriptResult(address(executor), _script, _input, output);

        return output;
    }

    modifier protectState {
        address preKernel = address(kernel());
        bytes32 preAppId = appId();
        _; // exec
        require(address(kernel()) == preKernel, ERROR_PROTECTED_STATE_MODIFIED);
        require(appId() == preAppId, ERROR_PROTECTED_STATE_MODIFIED);
    }
}

// File: contracts/apps/AragonApp.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;









// Contracts inheriting from AragonApp are, by default, immediately petrified upon deployment so
// that they can never be initialized.
// Unless overriden, this behaviour enforces those contracts to be usable only behind an AppProxy.
// ReentrancyGuard, EVMScriptRunner, and ACLSyntaxSugar are not directly used by this contract, but
// are included so that they are automatically usable by subclassing contracts
contract AragonApp is AppStorage, Autopetrified, VaultRecoverable, ReentrancyGuard, EVMScriptRunner, ACLSyntaxSugar {
    string private constant ERROR_AUTH_FAILED = "APP_AUTH_FAILED";

    modifier auth(bytes32 _role) {
        require(canPerform(msg.sender, _role, new uint256[](0)), ERROR_AUTH_FAILED);
        _;
    }

    modifier authP(bytes32 _role, uint256[] _params) {
        require(canPerform(msg.sender, _role, _params), ERROR_AUTH_FAILED);
        _;
    }

    /**
    * @dev Check whether an action can be performed by a sender for a particular role on this app
    * @param _sender Sender of the call
    * @param _role Role on this app
    * @param _params Permission params for the role
    * @return Boolean indicating whether the sender has the permissions to perform the action.
    *         Always returns false if the app hasn't been initialized yet.
    */
    function canPerform(address _sender, bytes32 _role, uint256[] _params) public view returns (bool) {
        if (!hasInitialized()) {
            return false;
        }

        IKernel linkedKernel = kernel();
        if (address(linkedKernel) == address(0)) {
            return false;
        }

        return linkedKernel.hasPermission(
            _sender,
            address(this),
            _role,
            ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)
        );
    }

    /**
    * @dev Get the recovery vault for the app
    * @return Recovery vault address for the app
    */
    function getRecoveryVault() public view returns (address) {
        // Funds recovery via a vault is only available when used with a kernel
        return kernel().getRecoveryVault(); // if kernel is not set, it will revert
    }
}

// File: contracts/acl/IACLOracle.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IACLOracle {
    function canPerform(address who, address where, bytes32 what, uint256[] how) external view returns (bool);
}

// File: contracts/acl/ACL.sol

pragma solidity 0.4.24;








/* solium-disable function-order */
// Allow public initialize() to be first
contract ACL is IACL, TimeHelpers, AragonApp, ACLHelpers {
    /* Hardcoded constants to save gas
    bytes32 public constant CREATE_PERMISSIONS_ROLE = keccak256("CREATE_PERMISSIONS_ROLE");
    */
    bytes32 public constant CREATE_PERMISSIONS_ROLE = 0x0b719b33c83b8e5d300c521cb8b54ae9bd933996a14bef8c2f4e0285d2d2400a;

    enum Op { NONE, EQ, NEQ, GT, LT, GTE, LTE, RET, NOT, AND, OR, XOR, IF_ELSE } // op types

    struct Param {
        uint8 id;
        uint8 op;
        uint240 value; // even though value is an uint240 it can store addresses
        // in the case of 32 byte hashes losing 2 bytes precision isn't a huge deal
        // op and id take less than 1 byte each so it can be kept in 1 sstore
    }

    uint8 internal constant BLOCK_NUMBER_PARAM_ID = 200;
    uint8 internal constant TIMESTAMP_PARAM_ID    = 201;
    // 202 is unused
    uint8 internal constant ORACLE_PARAM_ID       = 203;
    uint8 internal constant LOGIC_OP_PARAM_ID     = 204;
    uint8 internal constant PARAM_VALUE_PARAM_ID  = 205;
    // TODO: Add execution times param type?

    /* Hardcoded constant to save gas
    bytes32 public constant EMPTY_PARAM_HASH = keccak256(uint256(0));
    */
    bytes32 public constant EMPTY_PARAM_HASH = 0x290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e563;
    bytes32 public constant NO_PERMISSION = bytes32(0);
    address public constant ANY_ENTITY = address(-1);
    address public constant BURN_ENTITY = address(1); // address(0) is already used as "no permission manager"

    string private constant ERROR_AUTH_INIT_KERNEL = "ACL_AUTH_INIT_KERNEL";
    string private constant ERROR_AUTH_NO_MANAGER = "ACL_AUTH_NO_MANAGER";
    string private constant ERROR_EXISTENT_MANAGER = "ACL_EXISTENT_MANAGER";

    // Whether someone has a permission
    mapping (bytes32 => bytes32) internal permissions; // permissions hash => params hash
    mapping (bytes32 => Param[]) internal permissionParams; // params hash => params

    // Who is the manager of a permission
    mapping (bytes32 => address) internal permissionManager;

    event SetPermission(address indexed entity, address indexed app, bytes32 indexed role, bool allowed);
    event SetPermissionParams(address indexed entity, address indexed app, bytes32 indexed role, bytes32 paramsHash);
    event ChangePermissionManager(address indexed app, bytes32 indexed role, address indexed manager);

    modifier onlyPermissionManager(address _app, bytes32 _role) {
        require(msg.sender == getPermissionManager(_app, _role), ERROR_AUTH_NO_MANAGER);
        _;
    }

    modifier noPermissionManager(address _app, bytes32 _role) {
        // only allow permission creation (or re-creation) when there is no manager
        require(getPermissionManager(_app, _role) == address(0), ERROR_EXISTENT_MANAGER);
        _;
    }

    /**
    * @dev Initialize can only be called once. It saves the block number in which it was initialized.
    * @notice Initialize an ACL instance and set `_permissionsCreator` as the entity that can create other permissions
    * @param _permissionsCreator Entity that will be given permission over createPermission
    */
    function initialize(address _permissionsCreator) public onlyInit {
        initialized();
        require(msg.sender == address(kernel()), ERROR_AUTH_INIT_KERNEL);

        _createPermission(_permissionsCreator, this, CREATE_PERMISSIONS_ROLE, _permissionsCreator);
    }

    /**
    * @dev Creates a permission that wasn't previously set and managed.
    *      If a created permission is removed it is possible to reset it with createPermission.
    *      This is the **ONLY** way to create permissions and set managers to permissions that don't
    *      have a manager.
    *      In terms of the ACL being initialized, this function implicitly protects all the other
    *      state-changing external functions, as they all require the sender to be a manager.
    * @notice Create a new permission granting `_entity` the ability to perform actions requiring `_role` on `_app`, setting `_manager` as the permission's manager
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app in which the role will be allowed (requires app to depend on kernel for ACL)
    * @param _role Identifier for the group of actions in app given access to perform
    * @param _manager Address of the entity that will be able to grant and revoke the permission further.
    */
    function createPermission(address _entity, address _app, bytes32 _role, address _manager)
        external
        auth(CREATE_PERMISSIONS_ROLE)
        noPermissionManager(_app, _role)
    {
        _createPermission(_entity, _app, _role, _manager);
    }

    /**
    * @dev Grants permission if allowed. This requires `msg.sender` to be the permission manager
    * @notice Grant `_entity` the ability to perform actions requiring `_role` on `_app`
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app in which the role will be allowed (requires app to depend on kernel for ACL)
    * @param _role Identifier for the group of actions in app given access to perform
    */
    function grantPermission(address _entity, address _app, bytes32 _role)
        external
    {
        grantPermissionP(_entity, _app, _role, new uint256[](0));
    }

    /**
    * @dev Grants a permission with parameters if allowed. This requires `msg.sender` to be the permission manager
    * @notice Grant `_entity` the ability to perform actions requiring `_role` on `_app`
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app in which the role will be allowed (requires app to depend on kernel for ACL)
    * @param _role Identifier for the group of actions in app given access to perform
    * @param _params Permission parameters
    */
    function grantPermissionP(address _entity, address _app, bytes32 _role, uint256[] _params)
        public
        onlyPermissionManager(_app, _role)
    {
        bytes32 paramsHash = _params.length > 0 ? _saveParams(_params) : EMPTY_PARAM_HASH;
        _setPermission(_entity, _app, _role, paramsHash);
    }

    /**
    * @dev Revokes permission if allowed. This requires `msg.sender` to be the the permission manager
    * @notice Revoke from `_entity` the ability to perform actions requiring `_role` on `_app`
    * @param _entity Address of the whitelisted entity to revoke access from
    * @param _app Address of the app in which the role will be revoked
    * @param _role Identifier for the group of actions in app being revoked
    */
    function revokePermission(address _entity, address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermission(_entity, _app, _role, NO_PERMISSION);
    }

    /**
    * @notice Set `_newManager` as the manager of `_role` in `_app`
    * @param _newManager Address for the new manager
    * @param _app Address of the app in which the permission management is being transferred
    * @param _role Identifier for the group of actions being transferred
    */
    function setPermissionManager(address _newManager, address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermissionManager(_newManager, _app, _role);
    }

    /**
    * @notice Remove the manager of `_role` in `_app`
    * @param _app Address of the app in which the permission is being unmanaged
    * @param _role Identifier for the group of actions being unmanaged
    */
    function removePermissionManager(address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermissionManager(address(0), _app, _role);
    }

    /**
    * @notice Burn non-existent `_role` in `_app`, so no modification can be made to it (grant, revoke, permission manager)
    * @param _app Address of the app in which the permission is being burned
    * @param _role Identifier for the group of actions being burned
    */
    function createBurnedPermission(address _app, bytes32 _role)
        external
        auth(CREATE_PERMISSIONS_ROLE)
        noPermissionManager(_app, _role)
    {
        _setPermissionManager(BURN_ENTITY, _app, _role);
    }

    /**
    * @notice Burn `_role` in `_app`, so no modification can be made to it (grant, revoke, permission manager)
    * @param _app Address of the app in which the permission is being burned
    * @param _role Identifier for the group of actions being burned
    */
    function burnPermissionManager(address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermissionManager(BURN_ENTITY, _app, _role);
    }

    /**
     * @notice Get parameters for permission array length
     * @param _entity Address of the whitelisted entity that will be able to perform the role
     * @param _app Address of the app
     * @param _role Identifier for a group of actions in app
     * @return Length of the array
     */
    function getPermissionParamsLength(address _entity, address _app, bytes32 _role) external view returns (uint) {
        return permissionParams[permissions[permissionHash(_entity, _app, _role)]].length;
    }

    /**
    * @notice Get parameter for permission
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app
    * @param _role Identifier for a group of actions in app
    * @param _index Index of parameter in the array
    * @return Parameter (id, op, value)
    */
    function getPermissionParam(address _entity, address _app, bytes32 _role, uint _index)
        external
        view
        returns (uint8, uint8, uint240)
    {
        Param storage param = permissionParams[permissions[permissionHash(_entity, _app, _role)]][_index];
        return (param.id, param.op, param.value);
    }

    /**
    * @dev Get manager for permission
    * @param _app Address of the app
    * @param _role Identifier for a group of actions in app
    * @return address of the manager for the permission
    */
    function getPermissionManager(address _app, bytes32 _role) public view returns (address) {
        return permissionManager[roleHash(_app, _role)];
    }

    /**
    * @dev Function called by apps to check ACL on kernel or to check permission statu
    * @param _who Sender of the original call
    * @param _where Address of the app
    * @param _where Identifier for a group of actions in app
    * @param _how Permission parameters
    * @return boolean indicating whether the ACL allows the role or not
    */
    function hasPermission(address _who, address _where, bytes32 _what, bytes memory _how) public view returns (bool) {
        return hasPermission(_who, _where, _what, ConversionHelpers.dangerouslyCastBytesToUintArray(_how));
    }

    function hasPermission(address _who, address _where, bytes32 _what, uint256[] memory _how) public view returns (bool) {
        bytes32 whoParams = permissions[permissionHash(_who, _where, _what)];
        if (whoParams != NO_PERMISSION && evalParams(whoParams, _who, _where, _what, _how)) {
            return true;
        }

        bytes32 anyParams = permissions[permissionHash(ANY_ENTITY, _where, _what)];
        if (anyParams != NO_PERMISSION && evalParams(anyParams, ANY_ENTITY, _where, _what, _how)) {
            return true;
        }

        return false;
    }

    function hasPermission(address _who, address _where, bytes32 _what) public view returns (bool) {
        uint256[] memory empty = new uint256[](0);
        return hasPermission(_who, _where, _what, empty);
    }

    function evalParams(
        bytes32 _paramsHash,
        address _who,
        address _where,
        bytes32 _what,
        uint256[] _how
    ) public view returns (bool)
    {
        if (_paramsHash == EMPTY_PARAM_HASH) {
            return true;
        }

        return _evalParam(_paramsHash, 0, _who, _where, _what, _how);
    }

    /**
    * @dev Internal createPermission for access inside the kernel (on instantiation)
    */
    function _createPermission(address _entity, address _app, bytes32 _role, address _manager) internal {
        _setPermission(_entity, _app, _role, EMPTY_PARAM_HASH);
        _setPermissionManager(_manager, _app, _role);
    }

    /**
    * @dev Internal function called to actually save the permission
    */
    function _setPermission(address _entity, address _app, bytes32 _role, bytes32 _paramsHash) internal {
        permissions[permissionHash(_entity, _app, _role)] = _paramsHash;
        bool entityHasPermission = _paramsHash != NO_PERMISSION;
        bool permissionHasParams = entityHasPermission && _paramsHash != EMPTY_PARAM_HASH;

        emit SetPermission(_entity, _app, _role, entityHasPermission);
        if (permissionHasParams) {
            emit SetPermissionParams(_entity, _app, _role, _paramsHash);
        }
    }

    function _saveParams(uint256[] _encodedParams) internal returns (bytes32) {
        bytes32 paramHash = keccak256(abi.encodePacked(_encodedParams));
        Param[] storage params = permissionParams[paramHash];

        if (params.length == 0) { // params not saved before
            for (uint256 i = 0; i < _encodedParams.length; i++) {
                uint256 encodedParam = _encodedParams[i];
                Param memory param = Param(decodeParamId(encodedParam), decodeParamOp(encodedParam), uint240(encodedParam));
                params.push(param);
            }
        }

        return paramHash;
    }

    function _evalParam(
        bytes32 _paramsHash,
        uint32 _paramId,
        address _who,
        address _where,
        bytes32 _what,
        uint256[] _how
    ) internal view returns (bool)
    {
        if (_paramId >= permissionParams[_paramsHash].length) {
            return false; // out of bounds
        }

        Param memory param = permissionParams[_paramsHash][_paramId];

        if (param.id == LOGIC_OP_PARAM_ID) {
            return _evalLogic(param, _paramsHash, _who, _where, _what, _how);
        }

        uint256 value;
        uint256 comparedTo = uint256(param.value);

        // get value
        if (param.id == ORACLE_PARAM_ID) {
            value = checkOracle(IACLOracle(param.value), _who, _where, _what, _how) ? 1 : 0;
            comparedTo = 1;
        } else if (param.id == BLOCK_NUMBER_PARAM_ID) {
            value = getBlockNumber();
        } else if (param.id == TIMESTAMP_PARAM_ID) {
            value = getTimestamp();
        } else if (param.id == PARAM_VALUE_PARAM_ID) {
            value = uint256(param.value);
        } else {
            if (param.id >= _how.length) {
                return false;
            }
            value = uint256(uint240(_how[param.id])); // force lost precision
        }

        if (Op(param.op) == Op.RET) {
            return uint256(value) > 0;
        }

        return compare(value, Op(param.op), comparedTo);
    }

    function _evalLogic(Param _param, bytes32 _paramsHash, address _who, address _where, bytes32 _what, uint256[] _how)
        internal
        view
        returns (bool)
    {
        if (Op(_param.op) == Op.IF_ELSE) {
            uint32 conditionParam;
            uint32 successParam;
            uint32 failureParam;

            (conditionParam, successParam, failureParam) = decodeParamsList(uint256(_param.value));
            bool result = _evalParam(_paramsHash, conditionParam, _who, _where, _what, _how);

            return _evalParam(_paramsHash, result ? successParam : failureParam, _who, _where, _what, _how);
        }

        uint32 param1;
        uint32 param2;

        (param1, param2,) = decodeParamsList(uint256(_param.value));
        bool r1 = _evalParam(_paramsHash, param1, _who, _where, _what, _how);

        if (Op(_param.op) == Op.NOT) {
            return !r1;
        }

        if (r1 && Op(_param.op) == Op.OR) {
            return true;
        }

        if (!r1 && Op(_param.op) == Op.AND) {
            return false;
        }

        bool r2 = _evalParam(_paramsHash, param2, _who, _where, _what, _how);

        if (Op(_param.op) == Op.XOR) {
            return r1 != r2;
        }

        return r2; // both or and and depend on result of r2 after checks
    }

    function compare(uint256 _a, Op _op, uint256 _b) internal pure returns (bool) {
        if (_op == Op.EQ)  return _a == _b;                              // solium-disable-line lbrace
        if (_op == Op.NEQ) return _a != _b;                              // solium-disable-line lbrace
        if (_op == Op.GT)  return _a > _b;                               // solium-disable-line lbrace
        if (_op == Op.LT)  return _a < _b;                               // solium-disable-line lbrace
        if (_op == Op.GTE) return _a >= _b;                              // solium-disable-line lbrace
        if (_op == Op.LTE) return _a <= _b;                              // solium-disable-line lbrace
        return false;
    }

    function checkOracle(IACLOracle _oracleAddr, address _who, address _where, bytes32 _what, uint256[] _how) internal view returns (bool) {
        bytes4 sig = _oracleAddr.canPerform.selector;

        // a raw call is required so we can return false if the call reverts, rather than reverting
        bytes memory checkCalldata = abi.encodeWithSelector(sig, _who, _where, _what, _how);

        bool ok;
        assembly {
            // send all available gas; if the oracle eats up all the gas, we will eventually revert
            // note that we are currently guaranteed to still have some gas after the call from
            // EIP-150's 63/64 gas forward rule
            ok := staticcall(gas, _oracleAddr, add(checkCalldata, 0x20), mload(checkCalldata), 0, 0)
        }

        if (!ok) {
            return false;
        }

        uint256 size;
        assembly { size := returndatasize }
        if (size != 32) {
            return false;
        }

        bool result;
        assembly {
            let ptr := mload(0x40)       // get next free memory ptr
            returndatacopy(ptr, 0, size) // copy return from above `staticcall`
            result := mload(ptr)         // read data at ptr and set it to result
            mstore(ptr, 0)               // set pointer memory to 0 so it still is the next free ptr
        }

        return result;
    }

    /**
    * @dev Internal function that sets management
    */
    function _setPermissionManager(address _newManager, address _app, bytes32 _role) internal {
        permissionManager[roleHash(_app, _role)] = _newManager;
        emit ChangePermissionManager(_app, _role, _newManager);
    }

    function roleHash(address _where, bytes32 _what) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("ROLE", _where, _what));
    }

    function permissionHash(address _who, address _where, bytes32 _what) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("PERMISSION", _who, _where, _what));
    }
}

// File: contracts/evmscript/ScriptHelpers.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


library ScriptHelpers {
    function getSpecId(bytes _script) internal pure returns (uint32) {
        return uint32At(_script, 0);
    }

    function uint256At(bytes _data, uint256 _location) internal pure returns (uint256 result) {
        assembly {
            result := mload(add(_data, add(0x20, _location)))
        }
    }

    function addressAt(bytes _data, uint256 _location) internal pure returns (address result) {
        uint256 word = uint256At(_data, _location);

        assembly {
            result := div(and(word, 0xffffffffffffffffffffffffffffffffffffffff000000000000000000000000),
            0x1000000000000000000000000)
        }
    }

    function uint32At(bytes _data, uint256 _location) internal pure returns (uint32 result) {
        uint256 word = uint256At(_data, _location);

        assembly {
            result := div(and(word, 0xffffffff00000000000000000000000000000000000000000000000000000000),
            0x100000000000000000000000000000000000000000000000000000000)
        }
    }

    function locationOf(bytes _data, uint256 _location) internal pure returns (uint256 result) {
        assembly {
            result := add(_data, add(0x20, _location))
        }
    }

    function toBytes(bytes4 _sig) internal pure returns (bytes) {
        bytes memory payload = new bytes(4);
        assembly { mstore(add(payload, 0x20), _sig) }
        return payload;
    }
}

// File: contracts/evmscript/EVMScriptRegistry.sol

pragma solidity 0.4.24;






/* solium-disable function-order */
// Allow public initialize() to be first
contract EVMScriptRegistry is IEVMScriptRegistry, EVMScriptRegistryConstants, AragonApp {
    using ScriptHelpers for bytes;

    /* Hardcoded constants to save gas
    bytes32 public constant REGISTRY_ADD_EXECUTOR_ROLE = keccak256("REGISTRY_ADD_EXECUTOR_ROLE");
    bytes32 public constant REGISTRY_MANAGER_ROLE = keccak256("REGISTRY_MANAGER_ROLE");
    */
    bytes32 public constant REGISTRY_ADD_EXECUTOR_ROLE = 0xc4e90f38eea8c4212a009ca7b8947943ba4d4a58d19b683417f65291d1cd9ed2;
    // WARN: Manager can censor all votes and the like happening in an org
    bytes32 public constant REGISTRY_MANAGER_ROLE = 0xf7a450ef335e1892cb42c8ca72e7242359d7711924b75db5717410da3f614aa3;

    uint256 internal constant SCRIPT_START_LOCATION = 4;

    string private constant ERROR_INEXISTENT_EXECUTOR = "EVMREG_INEXISTENT_EXECUTOR";
    string private constant ERROR_EXECUTOR_ENABLED = "EVMREG_EXECUTOR_ENABLED";
    string private constant ERROR_EXECUTOR_DISABLED = "EVMREG_EXECUTOR_DISABLED";
    string private constant ERROR_SCRIPT_LENGTH_TOO_SHORT = "EVMREG_SCRIPT_LENGTH_TOO_SHORT";

    struct ExecutorEntry {
        IEVMScriptExecutor executor;
        bool enabled;
    }

    uint256 private executorsNextIndex;
    mapping (uint256 => ExecutorEntry) public executors;

    event EnableExecutor(uint256 indexed executorId, address indexed executorAddress);
    event DisableExecutor(uint256 indexed executorId, address indexed executorAddress);

    modifier executorExists(uint256 _executorId) {
        require(_executorId > 0 && _executorId < executorsNextIndex, ERROR_INEXISTENT_EXECUTOR);
        _;
    }

    /**
    * @notice Initialize the registry
    */
    function initialize() public onlyInit {
        initialized();
        // Create empty record to begin executor IDs at 1
        executorsNextIndex = 1;
    }

    /**
    * @notice Add a new script executor with address `_executor` to the registry
    * @param _executor Address of the IEVMScriptExecutor that will be added to the registry
    * @return id Identifier of the executor in the registry
    */
    function addScriptExecutor(IEVMScriptExecutor _executor) external auth(REGISTRY_ADD_EXECUTOR_ROLE) returns (uint256 id) {
        uint256 executorId = executorsNextIndex++;
        executors[executorId] = ExecutorEntry(_executor, true);
        emit EnableExecutor(executorId, _executor);
        return executorId;
    }

    /**
    * @notice Disable script executor with ID `_executorId`
    * @param _executorId Identifier of the executor in the registry
    */
    function disableScriptExecutor(uint256 _executorId)
        external
        authP(REGISTRY_MANAGER_ROLE, arr(_executorId))
    {
        // Note that we don't need to check for an executor's existence in this case, as only
        // existing executors can be enabled
        ExecutorEntry storage executorEntry = executors[_executorId];
        require(executorEntry.enabled, ERROR_EXECUTOR_DISABLED);
        executorEntry.enabled = false;
        emit DisableExecutor(_executorId, executorEntry.executor);
    }

    /**
    * @notice Enable script executor with ID `_executorId`
    * @param _executorId Identifier of the executor in the registry
    */
    function enableScriptExecutor(uint256 _executorId)
        external
        authP(REGISTRY_MANAGER_ROLE, arr(_executorId))
        executorExists(_executorId)
    {
        ExecutorEntry storage executorEntry = executors[_executorId];
        require(!executorEntry.enabled, ERROR_EXECUTOR_ENABLED);
        executorEntry.enabled = true;
        emit EnableExecutor(_executorId, executorEntry.executor);
    }

    /**
    * @dev Get the script executor that can execute a particular script based on its first 4 bytes
    * @param _script EVMScript being inspected
    */
    function getScriptExecutor(bytes _script) public view returns (IEVMScriptExecutor) {
        require(_script.length >= SCRIPT_START_LOCATION, ERROR_SCRIPT_LENGTH_TOO_SHORT);
        uint256 id = _script.getSpecId();

        // Note that we don't need to check for an executor's existence in this case, as only
        // existing executors can be enabled
        ExecutorEntry storage entry = executors[id];
        return entry.enabled ? entry.executor : IEVMScriptExecutor(0);
    }
}

// File: contracts/evmscript/executors/BaseEVMScriptExecutor.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




contract BaseEVMScriptExecutor is IEVMScriptExecutor, Autopetrified {
    uint256 internal constant SCRIPT_START_LOCATION = 4;
}

// File: contracts/evmscript/executors/CallsScript.sol

pragma solidity 0.4.24;

// Inspired by https://github.com/reverendus/tx-manager




contract CallsScript is BaseEVMScriptExecutor {
    using ScriptHelpers for bytes;

    /* Hardcoded constants to save gas
    bytes32 internal constant EXECUTOR_TYPE = keccak256("CALLS_SCRIPT");
    */
    bytes32 internal constant EXECUTOR_TYPE = 0x2dc858a00f3e417be1394b87c07158e989ec681ce8cc68a9093680ac1a870302;

    string private constant ERROR_BLACKLISTED_CALL = "EVMCALLS_BLACKLISTED_CALL";
    string private constant ERROR_INVALID_LENGTH = "EVMCALLS_INVALID_LENGTH";

    /* This is manually crafted in assembly
    string private constant ERROR_CALL_REVERTED = "EVMCALLS_CALL_REVERTED";
    */

    event LogScriptCall(address indexed sender, address indexed src, address indexed dst);

    /**
    * @notice Executes a number of call scripts
    * @param _script [ specId (uint32) ] many calls with this structure ->
    *    [ to (address: 20 bytes) ] [ calldataLength (uint32: 4 bytes) ] [ calldata (calldataLength bytes) ]
    * @param _blacklist Addresses the script cannot call to, or will revert.
    * @return Always returns empty byte array
    */
    function execScript(bytes _script, bytes, address[] _blacklist) external isInitialized returns (bytes) {
        uint256 location = SCRIPT_START_LOCATION; // first 32 bits are spec id
        while (location < _script.length) {
            // Check there's at least address + calldataLength available
            require(_script.length - location >= 0x18, ERROR_INVALID_LENGTH);

            address contractAddress = _script.addressAt(location);
            // Check address being called is not blacklist
            for (uint256 i = 0; i < _blacklist.length; i++) {
                require(contractAddress != _blacklist[i], ERROR_BLACKLISTED_CALL);
            }

            // logged before execution to ensure event ordering in receipt
            // if failed entire execution is reverted regardless
            emit LogScriptCall(msg.sender, address(this), contractAddress);

            uint256 calldataLength = uint256(_script.uint32At(location + 0x14));
            uint256 startOffset = location + 0x14 + 0x04;
            uint256 calldataStart = _script.locationOf(startOffset);

            // compute end of script / next location
            location = startOffset + calldataLength;
            require(location <= _script.length, ERROR_INVALID_LENGTH);

            bool success;
            assembly {
                success := call(
                    sub(gas, 5000),       // forward gas left - 5000
                    contractAddress,      // address
                    0,                    // no value
                    calldataStart,        // calldata start
                    calldataLength,       // calldata length
                    0,                    // don't write output
                    0                     // don't write output
                )

                switch success
                case 0 {
                    let ptr := mload(0x40)

                    switch returndatasize
                    case 0 {
                        // No error data was returned, revert with "EVMCALLS_CALL_REVERTED"
                        // See remix: doing a `revert("EVMCALLS_CALL_REVERTED")` always results in
                        // this memory layout
                        mstore(ptr, 0x08c379a000000000000000000000000000000000000000000000000000000000)         // error identifier
                        mstore(add(ptr, 0x04), 0x0000000000000000000000000000000000000000000000000000000000000020) // starting offset
                        mstore(add(ptr, 0x24), 0x0000000000000000000000000000000000000000000000000000000000000016) // reason length
                        mstore(add(ptr, 0x44), 0x45564d43414c4c535f43414c4c5f524556455254454400000000000000000000) // reason

                        revert(ptr, 100) // 100 = 4 + 3 * 32 (error identifier + 3 words for the ABI encoded error)
                    }
                    default {
                        // Forward the full error data
                        returndatacopy(ptr, 0, returndatasize)
                        revert(ptr, returndatasize)
                    }
                }
                default { }
            }
        }
        // No need to allocate empty bytes for the return as this can only be called via an delegatecall
        // (due to the isInitialized modifier)
    }

    function executorType() external pure returns (bytes32) {
        return EXECUTOR_TYPE;
    }
}

// File: contracts/factory/EVMScriptRegistryFactory.sol

pragma solidity 0.4.24;







contract EVMScriptRegistryFactory is EVMScriptRegistryConstants {
    EVMScriptRegistry public baseReg;
    IEVMScriptExecutor public baseCallScript;

    /**
    * @notice Create a new EVMScriptRegistryFactory.
    */
    constructor() public {
        baseReg = new EVMScriptRegistry();
        baseCallScript = IEVMScriptExecutor(new CallsScript());
    }

    /**
    * @notice Install a new pinned instance of EVMScriptRegistry on `_dao`.
    * @param _dao Kernel
    * @return Installed EVMScriptRegistry
    */
    function newEVMScriptRegistry(Kernel _dao) public returns (EVMScriptRegistry reg) {
        bytes memory initPayload = abi.encodeWithSelector(reg.initialize.selector);
        reg = EVMScriptRegistry(_dao.newPinnedAppInstance(EVMSCRIPT_REGISTRY_APP_ID, baseReg, initPayload, true));

        ACL acl = ACL(_dao.acl());

        acl.createPermission(this, reg, reg.REGISTRY_ADD_EXECUTOR_ROLE(), this);

        reg.addScriptExecutor(baseCallScript);     // spec 1 = CallsScript

        // Clean up the permissions
        acl.revokePermission(this, reg, reg.REGISTRY_ADD_EXECUTOR_ROLE());
        acl.removePermissionManager(reg, reg.REGISTRY_ADD_EXECUTOR_ROLE());

        return reg;
    }
}

// File: contracts/factory/DAOFactory.sol

pragma solidity 0.4.24;








contract DAOFactory {
    IKernel public baseKernel;
    IACL public baseACL;
    EVMScriptRegistryFactory public regFactory;

    event DeployDAO(address dao);
    event DeployEVMScriptRegistry(address reg);

    /**
    * @notice Create a new DAOFactory, creating DAOs with Kernels proxied to `_baseKernel`, ACLs proxied to `_baseACL`, and new EVMScriptRegistries created from `_regFactory`.
    * @param _baseKernel Base Kernel
    * @param _baseACL Base ACL
    * @param _regFactory EVMScriptRegistry factory
    */
    constructor(IKernel _baseKernel, IACL _baseACL, EVMScriptRegistryFactory _regFactory) public {
        // No need to init as it cannot be killed by devops199
        if (address(_regFactory) != address(0)) {
            regFactory = _regFactory;
        }

        baseKernel = _baseKernel;
        baseACL = _baseACL;
    }

    /**
    * @notice Create a new DAO with `_root` set as the initial admin
    * @param _root Address that will be granted control to setup DAO permissions
    * @return Newly created DAO
    */
    function newDAO(address _root) public returns (Kernel) {
        Kernel dao = Kernel(new KernelProxy(baseKernel));

        if (address(regFactory) == address(0)) {
            dao.initialize(baseACL, _root);
        } else {
            dao.initialize(baseACL, this);

            ACL acl = ACL(dao.acl());
            bytes32 permRole = acl.CREATE_PERMISSIONS_ROLE();
            bytes32 appManagerRole = dao.APP_MANAGER_ROLE();

            acl.grantPermission(regFactory, acl, permRole);

            acl.createPermission(regFactory, dao, appManagerRole, this);

            EVMScriptRegistry reg = regFactory.newEVMScriptRegistry(dao);
            emit DeployEVMScriptRegistry(address(reg));

            // Clean up permissions
            // First, completely reset the APP_MANAGER_ROLE
            acl.revokePermission(regFactory, dao, appManagerRole);
            acl.removePermissionManager(dao, appManagerRole);

            // Then, make root the only holder and manager of CREATE_PERMISSIONS_ROLE
            acl.revokePermission(regFactory, acl, permRole);
            acl.revokePermission(this, acl, permRole);
            acl.grantPermission(_root, acl, permRole);
            acl.setPermissionManager(_root, acl, permRole);
        }

        emit DeployDAO(address(dao));

        return dao;
    }
}

// File: contracts/acl/IACL.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IACL {
    function initialize(address permissionsCreator) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}

// File: contracts/common/IVaultRecoverable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);

    function transferToVault(address token) external;

    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}

// File: contracts/kernel/IKernel.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}


// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);

    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}

// File: contracts/kernel/KernelConstants.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}


contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}

// File: contracts/kernel/KernelStorage.sol

pragma solidity 0.4.24;


contract KernelStorage {
    // namespace => app id => address
    mapping (bytes32 => mapping (bytes32 => address)) public apps;
    bytes32 public recoveryVaultAppId;
}

// File: contracts/acl/ACLSyntaxSugar.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract ACLSyntaxSugar {
    function arr() internal pure returns (uint256[]) {
        return new uint256[](0);
    }

    function arr(bytes32 _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(bytes32 _a, bytes32 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(address _a, address _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c);
    }

    function arr(address _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c, _d);
    }

    function arr(address _a, uint256 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, address _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), _c, _d, _e);
    }

    function arr(address _a, address _b, address _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(address _a, address _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(uint256 _a) internal pure returns (uint256[] r) {
        r = new uint256[](1);
        r[0] = _a;
    }

    function arr(uint256 _a, uint256 _b) internal pure returns (uint256[] r) {
        r = new uint256[](2);
        r[0] = _a;
        r[1] = _b;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        r = new uint256[](3);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        r = new uint256[](4);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        r = new uint256[](5);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
        r[4] = _e;
    }
}


contract ACLHelpers {
    function decodeParamOp(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 30));
    }

    function decodeParamId(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 31));
    }

    function decodeParamsList(uint256 _x) internal pure returns (uint32 a, uint32 b, uint32 c) {
        a = uint32(_x);
        b = uint32(_x >> (8 * 4));
        c = uint32(_x >> (8 * 8));
    }
}

// File: contracts/common/ConversionHelpers.sol

pragma solidity ^0.4.24;


library ConversionHelpers {
    string private constant ERROR_IMPROPER_LENGTH = "CONVERSION_IMPROPER_LENGTH";

    function dangerouslyCastUintArrayToBytes(uint256[] memory _input) internal pure returns (bytes memory output) {
        // Force cast the uint256[] into a bytes array, by overwriting its length
        // Note that the bytes array doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 byteLength = _input.length * 32;
        assembly {
            output := _input
            mstore(output, byteLength)
        }
    }

    function dangerouslyCastBytesToUintArray(bytes memory _input) internal pure returns (uint256[] memory output) {
        // Force cast the bytes array into a uint256[], by overwriting its length
        // Note that the uint256[] doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 intsLength = _input.length / 32;
        require(_input.length == intsLength * 32, ERROR_IMPROPER_LENGTH);

        assembly {
            output := _input
            mstore(output, intsLength)
        }
    }
}

// File: contracts/common/IsContract.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }

        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}

// File: contracts/common/Uint256Helpers.sol

pragma solidity ^0.4.24;


library Uint256Helpers {
    uint256 private constant MAX_UINT64 = uint64(-1);

    string private constant ERROR_NUMBER_TOO_BIG = "UINT64_NUMBER_TOO_BIG";

    function toUint64(uint256 a) internal pure returns (uint64) {
        require(a <= MAX_UINT64, ERROR_NUMBER_TOO_BIG);
        return uint64(a);
    }
}

// File: contracts/common/TimeHelpers.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;



contract TimeHelpers {
    using Uint256Helpers for uint256;

    /**
    * @dev Returns the current block number.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }

    /**
    * @dev Returns the current block number, converted to uint64.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber64() internal view returns (uint64) {
        return getBlockNumber().toUint64();
    }

    /**
    * @dev Returns the current timestamp.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp() internal view returns (uint256) {
        return block.timestamp; // solium-disable-line security/no-block-members
    }

    /**
    * @dev Returns the current timestamp, converted to uint64.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp64() internal view returns (uint64) {
        return getTimestamp().toUint64();
    }
}

// File: contracts/common/UnstructuredStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }

    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }

    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }

    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }

    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}

// File: contracts/common/Initializable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




contract Initializable is TimeHelpers {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.initializable.initializationBlock")
    bytes32 internal constant INITIALIZATION_BLOCK_POSITION = 0xebb05b386a8d34882b8711d156f463690983dc47815980fb82aeeff1aa43579e;

    string private constant ERROR_ALREADY_INITIALIZED = "INIT_ALREADY_INITIALIZED";
    string private constant ERROR_NOT_INITIALIZED = "INIT_NOT_INITIALIZED";

    modifier onlyInit {
        require(getInitializationBlock() == 0, ERROR_ALREADY_INITIALIZED);
        _;
    }

    modifier isInitialized {
        require(hasInitialized(), ERROR_NOT_INITIALIZED);
        _;
    }

    /**
    * @return Block number in which the contract was initialized
    */
    function getInitializationBlock() public view returns (uint256) {
        return INITIALIZATION_BLOCK_POSITION.getStorageUint256();
    }

    /**
    * @return Whether the contract has been initialized by the time of the current block
    */
    function hasInitialized() public view returns (bool) {
        uint256 initializationBlock = getInitializationBlock();
        return initializationBlock != 0 && getBlockNumber() >= initializationBlock;
    }

    /**
    * @dev Function to be called by top level contract after initialization has finished.
    */
    function initialized() internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(getBlockNumber());
    }

    /**
    * @dev Function to be called by top level contract after initialization to enable the contract
    *      at a future block number rather than immediately.
    */
    function initializedAt(uint256 _blockNumber) internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(_blockNumber);
    }
}

// File: contracts/common/Petrifiable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;



contract Petrifiable is Initializable {
    // Use block UINT256_MAX (which should be never) as the initializable date
    uint256 internal constant PETRIFIED_BLOCK = uint256(-1);

    function isPetrified() public view returns (bool) {
        return getInitializationBlock() == PETRIFIED_BLOCK;
    }

    /**
    * @dev Function to be called by top level contract to prevent being initialized.
    *      Useful for freezing base contracts when they're used behind proxies.
    */
    function petrify() internal onlyInit {
        initializedAt(PETRIFIED_BLOCK);
    }
}

// File: contracts/lib/token/ERC20.sol

// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/a9f910d34f0ab33a1ae5e714f69f9596a02b4d91/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.4.24;


/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function totalSupply() public view returns (uint256);

    function balanceOf(address _who) public view returns (uint256);

    function allowance(address _owner, address _spender)
        public view returns (uint256);

    function transfer(address _to, uint256 _value) public returns (bool);

    function approve(address _spender, uint256 _value)
        public returns (bool);

    function transferFrom(address _from, address _to, uint256 _value)
        public returns (bool);

    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );

    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: contracts/common/EtherTokenConstant.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


// aragonOS and aragon-apps rely on address(0) to denote native ETH, in
// contracts where both tokens and ETH are accepted
contract EtherTokenConstant {
    address internal constant ETH = address(0);
}

// File: contracts/common/SafeERC20.sol

// Inspired by AdEx (https://github.com/AdExNetwork/adex-protocol-eth/blob/b9df617829661a7518ee10f4cb6c4108659dd6d5/contracts/libs/SafeERC20.sol)
// and 0x (https://github.com/0xProject/0x-monorepo/blob/737d1dc54d72872e24abce5a1dbe1b66d35fa21a/contracts/protocol/contracts/protocol/AssetProxy/ERC20Proxy.sol#L143)

pragma solidity ^0.4.24;



library SafeERC20 {
    // Before 0.5, solidity has a mismatch between `address.transfer()` and `token.transfer()`:
    // https://github.com/ethereum/solidity/issues/3544
    bytes4 private constant TRANSFER_SELECTOR = 0xa9059cbb;

    string private constant ERROR_TOKEN_BALANCE_REVERTED = "SAFE_ERC_20_BALANCE_REVERTED";
    string private constant ERROR_TOKEN_ALLOWANCE_REVERTED = "SAFE_ERC_20_ALLOWANCE_REVERTED";

    function invokeAndCheckSuccess(address _addr, bytes memory _calldata)
        private
        returns (bool)
    {
        bool ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            let success := call(
                gas,                  // forward all gas
                _addr,                // address
                0,                    // no value
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                // Check number of bytes returned from last function call
                switch returndatasize

                // No bytes returned: assume success
                case 0 {
                    ret := 1
                }

                // 32 bytes returned: check if non-zero
                case 0x20 {
                    // Only return success if returned data was true
                    // Already have output in ptr
                    ret := eq(mload(ptr), 1)
                }

                // Not sure what was returned: don't mark as success
                default { }
            }
        }
        return ret;
    }

    function staticInvoke(address _addr, bytes memory _calldata)
        private
        view
        returns (bool, uint256)
    {
        bool success;
        uint256 ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            success := staticcall(
                gas,                  // forward all gas
                _addr,                // address
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                ret := mload(ptr)
            }
        }
        return (success, ret);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transfer() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransfer(ERC20 _token, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferCallData = abi.encodeWithSelector(
            TRANSFER_SELECTOR,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transferFrom() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransferFrom(ERC20 _token, address _from, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferFromCallData = abi.encodeWithSelector(
            _token.transferFrom.selector,
            _from,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferFromCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.approve() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeApprove(ERC20 _token, address _spender, uint256 _amount) internal returns (bool) {
        bytes memory approveCallData = abi.encodeWithSelector(
            _token.approve.selector,
            _spender,
            _amount
        );
        return invokeAndCheckSuccess(_token, approveCallData);
    }

    /**
    * @dev Static call into ERC20.balanceOf().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticBalanceOf(ERC20 _token, address _owner) internal view returns (uint256) {
        bytes memory balanceOfCallData = abi.encodeWithSelector(
            _token.balanceOf.selector,
            _owner
        );

        (bool success, uint256 tokenBalance) = staticInvoke(_token, balanceOfCallData);
        require(success, ERROR_TOKEN_BALANCE_REVERTED);

        return tokenBalance;
    }

    /**
    * @dev Static call into ERC20.allowance().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticAllowance(ERC20 _token, address _owner, address _spender) internal view returns (uint256) {
        bytes memory allowanceCallData = abi.encodeWithSelector(
            _token.allowance.selector,
            _owner,
            _spender
        );

        (bool success, uint256 allowance) = staticInvoke(_token, allowanceCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return allowance;
    }

    /**
    * @dev Static call into ERC20.totalSupply().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticTotalSupply(ERC20 _token) internal view returns (uint256) {
        bytes memory totalSupplyCallData = abi.encodeWithSelector(_token.totalSupply.selector);

        (bool success, uint256 totalSupply) = staticInvoke(_token, totalSupplyCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return totalSupply;
    }
}

// File: contracts/common/VaultRecoverable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;







contract VaultRecoverable is IVaultRecoverable, EtherTokenConstant, IsContract {
    using SafeERC20 for ERC20;

    string private constant ERROR_DISALLOWED = "RECOVER_DISALLOWED";
    string private constant ERROR_VAULT_NOT_CONTRACT = "RECOVER_VAULT_NOT_CONTRACT";
    string private constant ERROR_TOKEN_TRANSFER_FAILED = "RECOVER_TOKEN_TRANSFER_FAILED";

    /**
     * @notice Send funds to recovery Vault. This contract should never receive funds,
     *         but in case it does, this function allows one to recover them.
     * @param _token Token balance to be sent to recovery vault.
     */
    function transferToVault(address _token) external {
        require(allowRecoverability(_token), ERROR_DISALLOWED);
        address vault = getRecoveryVault();
        require(isContract(vault), ERROR_VAULT_NOT_CONTRACT);

        uint256 balance;
        if (_token == ETH) {
            balance = address(this).balance;
            vault.transfer(balance);
        } else {
            ERC20 token = ERC20(_token);
            balance = token.staticBalanceOf(this);
            require(token.safeTransfer(vault, balance), ERROR_TOKEN_TRANSFER_FAILED);
        }

        emit RecoverToVault(vault, _token, balance);
    }

    /**
    * @dev By default deriving from AragonApp makes it recoverable
    * @param token Token address that would be recovered
    * @return bool whether the app allows the recovery
    */
    function allowRecoverability(address token) public view returns (bool) {
        return true;
    }

    // Cast non-implemented interface to be public so we can use it internally
    function getRecoveryVault() public view returns (address);
}

// File: contracts/apps/AppStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




contract AppStorage {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;

    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }

    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }

    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }

    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}

// File: contracts/lib/misc/ERCProxy.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract ERCProxy {
    uint256 internal constant FORWARDING = 1;
    uint256 internal constant UPGRADEABLE = 2;

    function proxyType() public pure returns (uint256 proxyTypeId);
    function implementation() public view returns (address codeAddr);
}

// File: contracts/common/DelegateProxy.sol

pragma solidity 0.4.24;




contract DelegateProxy is ERCProxy, IsContract {
    uint256 internal constant FWD_GAS_LIMIT = 10000;

    /**
    * @dev Performs a delegatecall and returns whatever the delegatecall returned (entire context execution will return!)
    * @param _dst Destination address to perform the delegatecall
    * @param _calldata Calldata for the delegatecall
    */
    function delegatedFwd(address _dst, bytes _calldata) internal {
        require(isContract(_dst));
        uint256 fwdGasLimit = FWD_GAS_LIMIT;

        assembly {
            let result := delegatecall(sub(gas, fwdGasLimit), _dst, add(_calldata, 0x20), mload(_calldata), 0, 0)
            let size := returndatasize
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, size)

            // revert instead of invalid() bc if the underlying call failed with invalid() it already wasted gas.
            // if the call returned error data, forward it
            switch result case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

// File: contracts/common/DepositableStorage.sol

pragma solidity 0.4.24;



contract DepositableStorage {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.depositableStorage.depositable")
    bytes32 internal constant DEPOSITABLE_POSITION = 0x665fd576fbbe6f247aff98f5c94a561e3f71ec2d3c988d56f12d342396c50cea;

    function isDepositable() public view returns (bool) {
        return DEPOSITABLE_POSITION.getStorageBool();
    }

    function setDepositable(bool _depositable) internal {
        DEPOSITABLE_POSITION.setStorageBool(_depositable);
    }
}

// File: contracts/common/DepositableDelegateProxy.sol

pragma solidity 0.4.24;




contract DepositableDelegateProxy is DepositableStorage, DelegateProxy {
    event ProxyDeposit(address sender, uint256 value);

    function () external payable {
        uint256 forwardGasThreshold = FWD_GAS_LIMIT;
        bytes32 isDepositablePosition = DEPOSITABLE_POSITION;

        // Optimized assembly implementation to prevent EIP-1884 from breaking deposits, reference code in Solidity:
        // https://github.com/aragon/aragonOS/blob/v4.2.1/contracts/common/DepositableDelegateProxy.sol#L10-L20
        assembly {
            // Continue only if the gas left is lower than the threshold for forwarding to the implementation code,
            // otherwise continue outside of the assembly block.
            if lt(gas, forwardGasThreshold) {
                // Only accept the deposit and emit an event if all of the following are true:
                // the proxy accepts deposits (isDepositable), msg.data.length == 0, and msg.value > 0
                if and(and(sload(isDepositablePosition), iszero(calldatasize)), gt(callvalue, 0)) {
                    // Equivalent Solidity code for emitting the event:
                    // emit ProxyDeposit(msg.sender, msg.value);

                    let logData := mload(0x40) // free memory pointer
                    mstore(logData, caller) // add 'msg.sender' to the log data (first event param)
                    mstore(add(logData, 0x20), callvalue) // add 'msg.value' to the log data (second event param)

                    // Emit an event with one topic to identify the event: keccak256('ProxyDeposit(address,uint256)') = 0x15ee...dee1
                    log1(logData, 0x40, 0x15eeaa57c7bd188c1388020bcadc2c436ec60d647d36ef5b9eb3c742217ddee1)

                    stop() // Stop. Exits execution context
                }

                // If any of above checks failed, revert the execution (if ETH was sent, it is returned to the sender)
                revert(0, 0)
            }
        }

        address target = implementation();
        delegatedFwd(target, msg.data);
    }
}

// File: contracts/apps/AppProxyBase.sol

pragma solidity 0.4.24;






contract AppProxyBase is AppStorage, DepositableDelegateProxy, KernelNamespaceConstants {
    /**
    * @dev Initialize AppProxy
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public {
        setKernel(_kernel);
        setAppId(_appId);

        // Implicit check that kernel is actually a Kernel
        // The EVM doesn't actually provide a way for us to make sure, but we can force a revert to
        // occur if the kernel is set to 0x0 or a non-code address when we try to call a method on
        // it.
        address appCode = getAppBase(_appId);

        // If initialize payload is provided, it will be executed
        if (_initializePayload.length > 0) {
            require(isContract(appCode));
            // Cannot make delegatecall as a delegateproxy.delegatedFwd as it
            // returns ending execution context and halts contract deployment
            require(appCode.delegatecall(_initializePayload));
        }
    }

    function getAppBase(bytes32 _appId) internal view returns (address) {
        return kernel().getApp(KERNEL_APP_BASES_NAMESPACE, _appId);
    }
}

// File: contracts/apps/AppProxyUpgradeable.sol

pragma solidity 0.4.24;



contract AppProxyUpgradeable is AppProxyBase {
    /**
    * @dev Initialize AppProxyUpgradeable (makes it an upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        // solium-disable-previous-line no-empty-blocks
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return getAppBase(appId());
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }
}

// File: contracts/apps/AppProxyPinned.sol

pragma solidity 0.4.24;





contract AppProxyPinned is IsContract, AppProxyBase {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.appStorage.pinnedCode")
    bytes32 internal constant PINNED_CODE_POSITION = 0xdee64df20d65e53d7f51cb6ab6d921a0a6a638a91e942e1d8d02df28e31c038e;

    /**
    * @dev Initialize AppProxyPinned (makes it an un-upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        setPinnedCode(getAppBase(_appId));
        require(isContract(pinnedCode()));
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return pinnedCode();
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return FORWARDING;
    }

    function setPinnedCode(address _pinnedCode) internal {
        PINNED_CODE_POSITION.setStorageAddress(_pinnedCode);
    }

    function pinnedCode() internal view returns (address) {
        return PINNED_CODE_POSITION.getStorageAddress();
    }
}

// File: contracts/factory/AppProxyFactory.sol

pragma solidity 0.4.24;




contract AppProxyFactory {
    event NewAppProxy(address proxy, bool isUpgradeable, bytes32 appId);

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId) public returns (AppProxyUpgradeable) {
        return newAppProxy(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyUpgradeable) {
        AppProxyUpgradeable proxy = new AppProxyUpgradeable(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), true, _appId);
        return proxy;
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId) public returns (AppProxyPinned) {
        return newAppProxyPinned(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @param _initializePayload Proxy initialization payload
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyPinned) {
        AppProxyPinned proxy = new AppProxyPinned(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), false, _appId);
        return proxy;
    }
}

// File: contracts/kernel/Kernel.sol

pragma solidity 0.4.24;













// solium-disable-next-line max-len
contract Kernel is IKernel, KernelStorage, KernelAppIds, KernelNamespaceConstants, Petrifiable, IsContract, VaultRecoverable, AppProxyFactory, ACLSyntaxSugar {
    /* Hardcoded constants to save gas
    bytes32 public constant APP_MANAGER_ROLE = keccak256("APP_MANAGER_ROLE");
    */
    bytes32 public constant APP_MANAGER_ROLE = 0xb6d92708f3d4817afc106147d969e229ced5c46e65e0a5002a0d391287762bd0;

    string private constant ERROR_APP_NOT_CONTRACT = "KERNEL_APP_NOT_CONTRACT";
    string private constant ERROR_INVALID_APP_CHANGE = "KERNEL_INVALID_APP_CHANGE";
    string private constant ERROR_AUTH_FAILED = "KERNEL_AUTH_FAILED";

    /**
    * @dev Constructor that allows the deployer to choose if the base instance should be petrified immediately.
    * @param _shouldPetrify Immediately petrify this instance so that it can never be initialized
    */
    constructor(bool _shouldPetrify) public {
        if (_shouldPetrify) {
            petrify();
        }
    }

    /**
    * @dev Initialize can only be called once. It saves the block number in which it was initialized.
    * @notice Initialize this kernel instance along with its ACL and set `_permissionsCreator` as the entity that can create other permissions
    * @param _baseAcl Address of base ACL app
    * @param _permissionsCreator Entity that will be given permission over createPermission
    */
    function initialize(IACL _baseAcl, address _permissionsCreator) public onlyInit {
        initialized();

        // Set ACL base
        _setApp(KERNEL_APP_BASES_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, _baseAcl);

        // Create ACL instance and attach it as the default ACL app
        IACL acl = IACL(newAppProxy(this, KERNEL_DEFAULT_ACL_APP_ID));
        acl.initialize(_permissionsCreator);
        _setApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, acl);

        recoveryVaultAppId = KERNEL_DEFAULT_VAULT_APP_ID;
    }

    /**
    * @dev Create a new instance of an app linked to this kernel
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new instance of an app linked to this kernel and set its base
    *      implementation if it was not already set
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxy(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`.
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newPinnedAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel and set
    *      its base implementation if it was not already set
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxyPinned(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Set the resolving address of an app instance or base implementation
    * @notice Set the resolving address of `_appId` in namespace `_namespace` to `_app`
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @param _app Address of the app instance or base implementation
    * @return ID of app
    */
    function setApp(bytes32 _namespace, bytes32 _appId, address _app)
        public
        auth(APP_MANAGER_ROLE, arr(_namespace, _appId))
    {
        _setApp(_namespace, _appId, _app);
    }

    /**
    * @dev Set the default vault id for the escape hatch mechanism
    * @param _recoveryVaultAppId Identifier of the recovery vault app
    */
    function setRecoveryVaultAppId(bytes32 _recoveryVaultAppId)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_ADDR_NAMESPACE, _recoveryVaultAppId))
    {
        recoveryVaultAppId = _recoveryVaultAppId;
    }

    // External access to default app id and namespace constants to mimic default getters for constants
    /* solium-disable function-order, mixedcase */
    function CORE_NAMESPACE() external pure returns (bytes32) { return KERNEL_CORE_NAMESPACE; }
    function APP_BASES_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_BASES_NAMESPACE; }
    function APP_ADDR_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_ADDR_NAMESPACE; }
    function KERNEL_APP_ID() external pure returns (bytes32) { return KERNEL_CORE_APP_ID; }
    function DEFAULT_ACL_APP_ID() external pure returns (bytes32) { return KERNEL_DEFAULT_ACL_APP_ID; }
    /* solium-enable function-order, mixedcase */

    /**
    * @dev Get the address of an app instance or base implementation
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @return Address of the app
    */
    function getApp(bytes32 _namespace, bytes32 _appId) public view returns (address) {
        return apps[_namespace][_appId];
    }

    /**
    * @dev Get the address of the recovery Vault instance (to recover funds)
    * @return Address of the Vault
    */
    function getRecoveryVault() public view returns (address) {
        return apps[KERNEL_APP_ADDR_NAMESPACE][recoveryVaultAppId];
    }

    /**
    * @dev Get the installed ACL app
    * @return ACL app
    */
    function acl() public view returns (IACL) {
        return IACL(getApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID));
    }

    /**
    * @dev Function called by apps to check ACL on kernel or to check permission status
    * @param _who Sender of the original call
    * @param _where Address of the app
    * @param _what Identifier for a group of actions in app
    * @param _how Extra data for ACL auth
    * @return Boolean indicating whether the ACL allows the role or not.
    *         Always returns false if the kernel hasn't been initialized yet.
    */
    function hasPermission(address _who, address _where, bytes32 _what, bytes _how) public view returns (bool) {
        IACL defaultAcl = acl();
        return address(defaultAcl) != address(0) && // Poor man's initialization check (saves gas)
            defaultAcl.hasPermission(_who, _where, _what, _how);
    }

    function _setApp(bytes32 _namespace, bytes32 _appId, address _app) internal {
        require(isContract(_app), ERROR_APP_NOT_CONTRACT);
        apps[_namespace][_appId] = _app;
        emit SetApp(_namespace, _appId, _app);
    }

    function _setAppIfNew(bytes32 _namespace, bytes32 _appId, address _app) internal {
        address app = getApp(_namespace, _appId);
        if (app != address(0)) {
            // The only way to set an app is if it passes the isContract check, so no need to check it again
            require(app == _app, ERROR_INVALID_APP_CHANGE);
        } else {
            _setApp(_namespace, _appId, _app);
        }
    }

    modifier auth(bytes32 _role, uint256[] memory _params) {
        require(
            hasPermission(msg.sender, address(this), _role, ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)),
            ERROR_AUTH_FAILED
        );
        _;
    }
}

/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
contract ACLSyntaxSugar {
    function arr() internal pure returns (uint256[]) {
        return new uint256[](0);
    }
    function arr(bytes32 _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }
    function arr(bytes32 _a, bytes32 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }
    function arr(address _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }
    function arr(address _a, address _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }
    function arr(address _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c);
    }
    function arr(address _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c, _d);
    }
    function arr(address _a, uint256 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }
    function arr(address _a, address _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), _c, _d, _e);
    }
    function arr(address _a, address _b, address _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }
    function arr(address _a, address _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }
    function arr(uint256 _a) internal pure returns (uint256[] r) {
        r = new uint256[](1);
        r[0] = _a;
    }
    function arr(uint256 _a, uint256 _b) internal pure returns (uint256[] r) {
        r = new uint256[](2);
        r[0] = _a;
        r[1] = _b;
    }
    function arr(uint256 _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        r = new uint256[](3);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
    }
    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        r = new uint256[](4);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
    }
    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        r = new uint256[](5);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
        r[4] = _e;
    }
}
contract ACLHelpers {
    function decodeParamOp(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 30));
    }
    function decodeParamId(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 31));
    }
    function decodeParamsList(uint256 _x) internal pure returns (uint32 a, uint32 b, uint32 c) {
        a = uint32(_x);
        b = uint32(_x >> (8 * 4));
        c = uint32(_x >> (8 * 8));
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
interface IACL {
    function initialize(address permissionsCreator) external;
    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../common/UnstructuredStorage.sol";
import "../kernel/IKernel.sol";
contract AppStorage {
    using UnstructuredStorage for bytes32;
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;
    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }
    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }
    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }
    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./AppStorage.sol";
import "../acl/ACLSyntaxSugar.sol";
import "../common/Autopetrified.sol";
import "../common/ConversionHelpers.sol";
import "../common/ReentrancyGuard.sol";
import "../common/VaultRecoverable.sol";
import "../evmscript/EVMScriptRunner.sol";
// Contracts inheriting from AragonApp are, by default, immediately petrified upon deployment so
// that they can never be initialized.
// Unless overriden, this behaviour enforces those contracts to be usable only behind an AppProxy.
// ReentrancyGuard, EVMScriptRunner, and ACLSyntaxSugar are not directly used by this contract, but
// are included so that they are automatically usable by subclassing contracts
contract AragonApp is AppStorage, Autopetrified, VaultRecoverable, ReentrancyGuard, EVMScriptRunner, ACLSyntaxSugar {
    string private constant ERROR_AUTH_FAILED = "APP_AUTH_FAILED";
    modifier auth(bytes32 _role) {
        require(canPerform(msg.sender, _role, new uint256[](0)), ERROR_AUTH_FAILED);
        _;
    }
    modifier authP(bytes32 _role, uint256[] _params) {
        require(canPerform(msg.sender, _role, _params), ERROR_AUTH_FAILED);
        _;
    }
    /**
    * @dev Check whether an action can be performed by a sender for a particular role on this app
    * @param _sender Sender of the call
    * @param _role Role on this app
    * @param _params Permission params for the role
    * @return Boolean indicating whether the sender has the permissions to perform the action.
    *         Always returns false if the app hasn't been initialized yet.
    */
    function canPerform(address _sender, bytes32 _role, uint256[] _params) public view returns (bool) {
        if (!hasInitialized()) {
            return false;
        }
        IKernel linkedKernel = kernel();
        if (address(linkedKernel) == address(0)) {
            return false;
        }
        return linkedKernel.hasPermission(
            _sender,
            address(this),
            _role,
            ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)
        );
    }
    /**
    * @dev Get the recovery vault for the app
    * @return Recovery vault address for the app
    */
    function getRecoveryVault() public view returns (address) {
        // Funds recovery via a vault is only available when used with a kernel
        return kernel().getRecoveryVault(); // if kernel is not set, it will revert
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./Petrifiable.sol";
contract Autopetrified is Petrifiable {
    constructor() public {
        // Immediately petrify base (non-proxy) instances of inherited contracts on deploy.
        // This renders them uninitializable (and unusable without a proxy).
        petrify();
    }
}
pragma solidity ^0.4.24;
library ConversionHelpers {
    string private constant ERROR_IMPROPER_LENGTH = "CONVERSION_IMPROPER_LENGTH";
    function dangerouslyCastUintArrayToBytes(uint256[] memory _input) internal pure returns (bytes memory output) {
        // Force cast the uint256[] into a bytes array, by overwriting its length
        // Note that the bytes array doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 byteLength = _input.length * 32;
        assembly {
            output := _input
            mstore(output, byteLength)
        }
    }
    function dangerouslyCastBytesToUintArray(bytes memory _input) internal pure returns (uint256[] memory output) {
        // Force cast the bytes array into a uint256[], by overwriting its length
        // Note that the uint256[] doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 intsLength = _input.length / 32;
        require(_input.length == intsLength * 32, ERROR_IMPROPER_LENGTH);
        assembly {
            output := _input
            mstore(output, intsLength)
        }
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
// aragonOS and aragon-apps rely on address(0) to denote native ETH, in
// contracts where both tokens and ETH are accepted
contract EtherTokenConstant {
    address internal constant ETH = address(0);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./TimeHelpers.sol";
import "./UnstructuredStorage.sol";
contract Initializable is TimeHelpers {
    using UnstructuredStorage for bytes32;
    // keccak256("aragonOS.initializable.initializationBlock")
    bytes32 internal constant INITIALIZATION_BLOCK_POSITION = 0xebb05b386a8d34882b8711d156f463690983dc47815980fb82aeeff1aa43579e;
    string private constant ERROR_ALREADY_INITIALIZED = "INIT_ALREADY_INITIALIZED";
    string private constant ERROR_NOT_INITIALIZED = "INIT_NOT_INITIALIZED";
    modifier onlyInit {
        require(getInitializationBlock() == 0, ERROR_ALREADY_INITIALIZED);
        _;
    }
    modifier isInitialized {
        require(hasInitialized(), ERROR_NOT_INITIALIZED);
        _;
    }
    /**
    * @return Block number in which the contract was initialized
    */
    function getInitializationBlock() public view returns (uint256) {
        return INITIALIZATION_BLOCK_POSITION.getStorageUint256();
    }
    /**
    * @return Whether the contract has been initialized by the time of the current block
    */
    function hasInitialized() public view returns (bool) {
        uint256 initializationBlock = getInitializationBlock();
        return initializationBlock != 0 && getBlockNumber() >= initializationBlock;
    }
    /**
    * @dev Function to be called by top level contract after initialization has finished.
    */
    function initialized() internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(getBlockNumber());
    }
    /**
    * @dev Function to be called by top level contract after initialization to enable the contract
    *      at a future block number rather than immediately.
    */
    function initializedAt(uint256 _blockNumber) internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(_blockNumber);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }
        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);
    function transferToVault(address token) external;
    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./Initializable.sol";
contract Petrifiable is Initializable {
    // Use block UINT256_MAX (which should be never) as the initializable date
    uint256 internal constant PETRIFIED_BLOCK = uint256(-1);
    function isPetrified() public view returns (bool) {
        return getInitializationBlock() == PETRIFIED_BLOCK;
    }
    /**
    * @dev Function to be called by top level contract to prevent being initialized.
    *      Useful for freezing base contracts when they're used behind proxies.
    */
    function petrify() internal onlyInit {
        initializedAt(PETRIFIED_BLOCK);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../common/UnstructuredStorage.sol";
contract ReentrancyGuard {
    using UnstructuredStorage for bytes32;
    /* Hardcoded constants to save gas
    bytes32 internal constant REENTRANCY_MUTEX_POSITION = keccak256("aragonOS.reentrancyGuard.mutex");
    */
    bytes32 private constant REENTRANCY_MUTEX_POSITION = 0xe855346402235fdd185c890e68d2c4ecad599b88587635ee285bce2fda58dacb;
    string private constant ERROR_REENTRANT = "REENTRANCY_REENTRANT_CALL";
    modifier nonReentrant() {
        // Ensure mutex is unlocked
        require(!REENTRANCY_MUTEX_POSITION.getStorageBool(), ERROR_REENTRANT);
        // Lock mutex before function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(true);
        // Perform function call
        _;
        // Unlock mutex after function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(false);
    }
}
// Inspired by AdEx (https://github.com/AdExNetwork/adex-protocol-eth/blob/b9df617829661a7518ee10f4cb6c4108659dd6d5/contracts/libs/SafeERC20.sol)
// and 0x (https://github.com/0xProject/0x-monorepo/blob/737d1dc54d72872e24abce5a1dbe1b66d35fa21a/contracts/protocol/contracts/protocol/AssetProxy/ERC20Proxy.sol#L143)
pragma solidity ^0.4.24;
import "../lib/token/ERC20.sol";
library SafeERC20 {
    // Before 0.5, solidity has a mismatch between `address.transfer()` and `token.transfer()`:
    // https://github.com/ethereum/solidity/issues/3544
    bytes4 private constant TRANSFER_SELECTOR = 0xa9059cbb;
    string private constant ERROR_TOKEN_BALANCE_REVERTED = "SAFE_ERC_20_BALANCE_REVERTED";
    string private constant ERROR_TOKEN_ALLOWANCE_REVERTED = "SAFE_ERC_20_ALLOWANCE_REVERTED";
    function invokeAndCheckSuccess(address _addr, bytes memory _calldata)
        private
        returns (bool)
    {
        bool ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer
            let success := call(
                gas,                  // forward all gas
                _addr,                // address
                0,                    // no value
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )
            if gt(success, 0) {
                // Check number of bytes returned from last function call
                switch returndatasize
                // No bytes returned: assume success
                case 0 {
                    ret := 1
                }
                // 32 bytes returned: check if non-zero
                case 0x20 {
                    // Only return success if returned data was true
                    // Already have output in ptr
                    ret := eq(mload(ptr), 1)
                }
                // Not sure what was returned: don't mark as success
                default { }
            }
        }
        return ret;
    }
    function staticInvoke(address _addr, bytes memory _calldata)
        private
        view
        returns (bool, uint256)
    {
        bool success;
        uint256 ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer
            success := staticcall(
                gas,                  // forward all gas
                _addr,                // address
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )
            if gt(success, 0) {
                ret := mload(ptr)
            }
        }
        return (success, ret);
    }
    /**
    * @dev Same as a standards-compliant ERC20.transfer() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransfer(ERC20 _token, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferCallData = abi.encodeWithSelector(
            TRANSFER_SELECTOR,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferCallData);
    }
    /**
    * @dev Same as a standards-compliant ERC20.transferFrom() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransferFrom(ERC20 _token, address _from, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferFromCallData = abi.encodeWithSelector(
            _token.transferFrom.selector,
            _from,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferFromCallData);
    }
    /**
    * @dev Same as a standards-compliant ERC20.approve() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeApprove(ERC20 _token, address _spender, uint256 _amount) internal returns (bool) {
        bytes memory approveCallData = abi.encodeWithSelector(
            _token.approve.selector,
            _spender,
            _amount
        );
        return invokeAndCheckSuccess(_token, approveCallData);
    }
    /**
    * @dev Static call into ERC20.balanceOf().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticBalanceOf(ERC20 _token, address _owner) internal view returns (uint256) {
        bytes memory balanceOfCallData = abi.encodeWithSelector(
            _token.balanceOf.selector,
            _owner
        );
        (bool success, uint256 tokenBalance) = staticInvoke(_token, balanceOfCallData);
        require(success, ERROR_TOKEN_BALANCE_REVERTED);
        return tokenBalance;
    }
    /**
    * @dev Static call into ERC20.allowance().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticAllowance(ERC20 _token, address _owner, address _spender) internal view returns (uint256) {
        bytes memory allowanceCallData = abi.encodeWithSelector(
            _token.allowance.selector,
            _owner,
            _spender
        );
        (bool success, uint256 allowance) = staticInvoke(_token, allowanceCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);
        return allowance;
    }
    /**
    * @dev Static call into ERC20.totalSupply().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticTotalSupply(ERC20 _token) internal view returns (uint256) {
        bytes memory totalSupplyCallData = abi.encodeWithSelector(_token.totalSupply.selector);
        (bool success, uint256 totalSupply) = staticInvoke(_token, totalSupplyCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);
        return totalSupply;
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./Uint256Helpers.sol";
contract TimeHelpers {
    using Uint256Helpers for uint256;
    /**
    * @dev Returns the current block number.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }
    /**
    * @dev Returns the current block number, converted to uint64.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber64() internal view returns (uint64) {
        return getBlockNumber().toUint64();
    }
    /**
    * @dev Returns the current timestamp.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp() internal view returns (uint256) {
        return block.timestamp; // solium-disable-line security/no-block-members
    }
    /**
    * @dev Returns the current timestamp, converted to uint64.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp64() internal view returns (uint64) {
        return getTimestamp().toUint64();
    }
}
pragma solidity ^0.4.24;
library Uint256Helpers {
    uint256 private constant MAX_UINT64 = uint64(-1);
    string private constant ERROR_NUMBER_TOO_BIG = "UINT64_NUMBER_TOO_BIG";
    function toUint64(uint256 a) internal pure returns (uint64) {
        require(a <= MAX_UINT64, ERROR_NUMBER_TOO_BIG);
        return uint64(a);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }
    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }
    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }
    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }
    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../lib/token/ERC20.sol";
import "./EtherTokenConstant.sol";
import "./IsContract.sol";
import "./IVaultRecoverable.sol";
import "./SafeERC20.sol";
contract VaultRecoverable is IVaultRecoverable, EtherTokenConstant, IsContract {
    using SafeERC20 for ERC20;
    string private constant ERROR_DISALLOWED = "RECOVER_DISALLOWED";
    string private constant ERROR_VAULT_NOT_CONTRACT = "RECOVER_VAULT_NOT_CONTRACT";
    string private constant ERROR_TOKEN_TRANSFER_FAILED = "RECOVER_TOKEN_TRANSFER_FAILED";
    /**
     * @notice Send funds to recovery Vault. This contract should never receive funds,
     *         but in case it does, this function allows one to recover them.
     * @param _token Token balance to be sent to recovery vault.
     */
    function transferToVault(address _token) external {
        require(allowRecoverability(_token), ERROR_DISALLOWED);
        address vault = getRecoveryVault();
        require(isContract(vault), ERROR_VAULT_NOT_CONTRACT);
        uint256 balance;
        if (_token == ETH) {
            balance = address(this).balance;
            vault.transfer(balance);
        } else {
            ERC20 token = ERC20(_token);
            balance = token.staticBalanceOf(this);
            require(token.safeTransfer(vault, balance), ERROR_TOKEN_TRANSFER_FAILED);
        }
        emit RecoverToVault(vault, _token, balance);
    }
    /**
    * @dev By default deriving from AragonApp makes it recoverable
    * @param token Token address that would be recovered
    * @return bool whether the app allows the recovery
    */
    function allowRecoverability(address token) public view returns (bool) {
        return true;
    }
    // Cast non-implemented interface to be public so we can use it internally
    function getRecoveryVault() public view returns (address);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./IEVMScriptExecutor.sol";
import "./IEVMScriptRegistry.sol";
import "../apps/AppStorage.sol";
import "../kernel/KernelConstants.sol";
import "../common/Initializable.sol";
contract EVMScriptRunner is AppStorage, Initializable, EVMScriptRegistryConstants, KernelNamespaceConstants {
    string private constant ERROR_EXECUTOR_UNAVAILABLE = "EVMRUN_EXECUTOR_UNAVAILABLE";
    string private constant ERROR_PROTECTED_STATE_MODIFIED = "EVMRUN_PROTECTED_STATE_MODIFIED";
    /* This is manually crafted in assembly
    string private constant ERROR_EXECUTOR_INVALID_RETURN = "EVMRUN_EXECUTOR_INVALID_RETURN";
    */
    event ScriptResult(address indexed executor, bytes script, bytes input, bytes returnData);
    function getEVMScriptExecutor(bytes _script) public view returns (IEVMScriptExecutor) {
        return IEVMScriptExecutor(getEVMScriptRegistry().getScriptExecutor(_script));
    }
    function getEVMScriptRegistry() public view returns (IEVMScriptRegistry) {
        address registryAddr = kernel().getApp(KERNEL_APP_ADDR_NAMESPACE, EVMSCRIPT_REGISTRY_APP_ID);
        return IEVMScriptRegistry(registryAddr);
    }
    function runScript(bytes _script, bytes _input, address[] _blacklist)
        internal
        isInitialized
        protectState
        returns (bytes)
    {
        IEVMScriptExecutor executor = getEVMScriptExecutor(_script);
        require(address(executor) != address(0), ERROR_EXECUTOR_UNAVAILABLE);
        bytes4 sig = executor.execScript.selector;
        bytes memory data = abi.encodeWithSelector(sig, _script, _input, _blacklist);
        bytes memory output;
        assembly {
            let success := delegatecall(
                gas,                // forward all gas
                executor,           // address
                add(data, 0x20),    // calldata start
                mload(data),        // calldata length
                0,                  // don't write output (we'll handle this ourselves)
                0                   // don't write output
            )
            output := mload(0x40) // free mem ptr get
            switch success
            case 0 {
                // If the call errored, forward its full error data
                returndatacopy(output, 0, returndatasize)
                revert(output, returndatasize)
            }
            default {
                switch gt(returndatasize, 0x3f)
                case 0 {
                    // Need at least 0x40 bytes returned for properly ABI-encoded bytes values,
                    // revert with "EVMRUN_EXECUTOR_INVALID_RETURN"
                    // See remix: doing a `revert("EVMRUN_EXECUTOR_INVALID_RETURN")` always results in
                    // this memory layout
                    mstore(output, 0x08c379a000000000000000000000000000000000000000000000000000000000)         // error identifier
                    mstore(add(output, 0x04), 0x0000000000000000000000000000000000000000000000000000000000000020) // starting offset
                    mstore(add(output, 0x24), 0x000000000000000000000000000000000000000000000000000000000000001e) // reason length
                    mstore(add(output, 0x44), 0x45564d52554e5f4558454355544f525f494e56414c49445f52455455524e0000) // reason
                    revert(output, 100) // 100 = 4 + 3 * 32 (error identifier + 3 words for the ABI encoded error)
                }
                default {
                    // Copy result
                    //
                    // Needs to perform an ABI decode for the expected `bytes` return type of
                    // `executor.execScript()` as solidity will automatically ABI encode the returned bytes as:
                    //    [ position of the first dynamic length return value = 0x20 (32 bytes) ]
                    //    [ output length (32 bytes) ]
                    //    [ output content (N bytes) ]
                    //
                    // Perform the ABI decode by ignoring the first 32 bytes of the return data
                    let copysize := sub(returndatasize, 0x20)
                    returndatacopy(output, 0x20, copysize)
                    mstore(0x40, add(output, copysize)) // free mem ptr set
                }
            }
        }
        emit ScriptResult(address(executor), _script, _input, output);
        return output;
    }
    modifier protectState {
        address preKernel = address(kernel());
        bytes32 preAppId = appId();
        _; // exec
        require(address(kernel()) == preKernel, ERROR_PROTECTED_STATE_MODIFIED);
        require(appId() == preAppId, ERROR_PROTECTED_STATE_MODIFIED);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
interface IEVMScriptExecutor {
    function execScript(bytes script, bytes input, address[] blacklist) external returns (bytes);
    function executorType() external pure returns (bytes32);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./IEVMScriptExecutor.sol";
contract EVMScriptRegistryConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = apmNamehash("evmreg");
    */
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = 0xddbcfd564f642ab5627cf68b9b7d374fb4f8a36e941a75d89c87998cef03bd61;
}
interface IEVMScriptRegistry {
    function addScriptExecutor(IEVMScriptExecutor executor) external returns (uint id);
    function disableScriptExecutor(uint256 executorId) external;
    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function getScriptExecutor(bytes script) public view returns (IEVMScriptExecutor);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../acl/IACL.sol";
import "../common/IVaultRecoverable.sol";
interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}
// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}
contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}
// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/d51e38758e1d985661534534d5c61e27bece5042/contracts/math/SafeMath.sol
// Adapted to use pragma ^0.4.24 and satisfy our linter rules
pragma solidity ^0.4.24;
/**
 * @title SafeMath
 * @dev Math operations with safety checks that revert on error
 */
library SafeMath {
    string private constant ERROR_ADD_OVERFLOW = "MATH_ADD_OVERFLOW";
    string private constant ERROR_SUB_UNDERFLOW = "MATH_SUB_UNDERFLOW";
    string private constant ERROR_MUL_OVERFLOW = "MATH_MUL_OVERFLOW";
    string private constant ERROR_DIV_ZERO = "MATH_DIV_ZERO";
    /**
    * @dev Multiplies two numbers, reverts on overflow.
    */
    function mul(uint256 _a, uint256 _b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (_a == 0) {
            return 0;
        }
        uint256 c = _a * _b;
        require(c / _a == _b, ERROR_MUL_OVERFLOW);
        return c;
    }
    /**
    * @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
        require(_b > 0, ERROR_DIV_ZERO); // Solidity only automatically asserts when dividing by 0
        uint256 c = _a / _b;
        // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
        return c;
    }
    /**
    * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
        require(_b <= _a, ERROR_SUB_UNDERFLOW);
        uint256 c = _a - _b;
        return c;
    }
    /**
    * @dev Adds two numbers, reverts on overflow.
    */
    function add(uint256 _a, uint256 _b) internal pure returns (uint256) {
        uint256 c = _a + _b;
        require(c >= _a, ERROR_ADD_OVERFLOW);
        return c;
    }
    /**
    * @dev Divides two numbers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, ERROR_DIV_ZERO);
        return a % b;
    }
}
// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/a9f910d34f0ab33a1ae5e714f69f9596a02b4d91/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.4.24;
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function totalSupply() public view returns (uint256);
    function balanceOf(address _who) public view returns (uint256);
    function allowance(address _owner, address _spender)
        public view returns (uint256);
    function transfer(address _to, uint256 _value) public returns (bool);
    function approve(address _spender, uint256 _value)
        public returns (bool);
    function transferFrom(address _from, address _to, uint256 _value)
        public returns (bool);
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
//
// We need to pack four variables into the same 256bit-wide storage slot
// to lower the costs per each staking request.
//
// As a result, slot's memory aligned as follows:
//
// MSB ------------------------------------------------------------------------------> LSB
// 256____________160_________________________128_______________32_____________________ 0
// |_______________|___________________________|________________|_______________________|
// | maxStakeLimit | maxStakeLimitGrowthBlocks | prevStakeLimit | prevStakeBlockNumber  |
// |<-- 96 bits -->|<---------- 32 bits ------>|<-- 96 bits --->|<----- 32 bits ------->|
//
//
// NB: Internal representation conventions:
//
// - the `maxStakeLimitGrowthBlocks` field above represented as follows:
// `maxStakeLimitGrowthBlocks` = `maxStakeLimit` / `stakeLimitIncreasePerBlock`
//           32 bits                 96 bits               96 bits
//
//
// - the "staking paused" state is encoded by `prevStakeBlockNumber` being zero,
// - the "staking unlimited" state is encoded by `maxStakeLimit` being zero and `prevStakeBlockNumber` being non-zero.
//
/**
* @notice Library for the internal structs definitions
* @dev solidity <0.6 doesn't support top-level structs
* using the library to have a proper namespace
*/
library StakeLimitState {
    /**
      * @dev Internal representation struct (slot-wide)
      */
    struct Data {
        uint32 prevStakeBlockNumber;      // block number of the previous stake submit
        uint96 prevStakeLimit;            // limit value (<= `maxStakeLimit`) obtained on the previous stake submit
        uint32 maxStakeLimitGrowthBlocks; // limit regeneration speed expressed in blocks
        uint96 maxStakeLimit;             // maximum limit value
    }
}
library StakeLimitUnstructuredStorage {
    using UnstructuredStorage for bytes32;
    /// @dev Storage offset for `maxStakeLimit` (bits)
    uint256 internal constant MAX_STAKE_LIMIT_OFFSET = 160;
    /// @dev Storage offset for `maxStakeLimitGrowthBlocks` (bits)
    uint256 internal constant MAX_STAKE_LIMIT_GROWTH_BLOCKS_OFFSET = 128;
    /// @dev Storage offset for `prevStakeLimit` (bits)
    uint256 internal constant PREV_STAKE_LIMIT_OFFSET = 32;
    /// @dev Storage offset for `prevStakeBlockNumber` (bits)
    uint256 internal constant PREV_STAKE_BLOCK_NUMBER_OFFSET = 0;
    /**
    * @dev Read stake limit state from the unstructured storage position
    * @param _position storage offset
    */
    function getStorageStakeLimitStruct(bytes32 _position) internal view returns (StakeLimitState.Data memory stakeLimit) {
        uint256 slotValue = _position.getStorageUint256();
        stakeLimit.prevStakeBlockNumber = uint32(slotValue >> PREV_STAKE_BLOCK_NUMBER_OFFSET);
        stakeLimit.prevStakeLimit = uint96(slotValue >> PREV_STAKE_LIMIT_OFFSET);
        stakeLimit.maxStakeLimitGrowthBlocks = uint32(slotValue >> MAX_STAKE_LIMIT_GROWTH_BLOCKS_OFFSET);
        stakeLimit.maxStakeLimit = uint96(slotValue >> MAX_STAKE_LIMIT_OFFSET);
    }
     /**
    * @dev Write stake limit state to the unstructured storage position
    * @param _position storage offset
    * @param _data stake limit state structure instance
    */
    function setStorageStakeLimitStruct(bytes32 _position, StakeLimitState.Data memory _data) internal {
        _position.setStorageUint256(
            uint256(_data.prevStakeBlockNumber) << PREV_STAKE_BLOCK_NUMBER_OFFSET
                | uint256(_data.prevStakeLimit) << PREV_STAKE_LIMIT_OFFSET
                | uint256(_data.maxStakeLimitGrowthBlocks) << MAX_STAKE_LIMIT_GROWTH_BLOCKS_OFFSET
                | uint256(_data.maxStakeLimit) << MAX_STAKE_LIMIT_OFFSET
        );
    }
}
/**
* @notice Interface library with helper functions to deal with stake limit struct in a more high-level approach.
*/
library StakeLimitUtils {
    /**
    * @notice Calculate stake limit for the current block.
    * @dev using `_constGasMin` to make gas consumption independent of the current block number
    */
    function calculateCurrentStakeLimit(StakeLimitState.Data memory _data) internal view returns(uint256 limit) {
        uint256 stakeLimitIncPerBlock;
        if (_data.maxStakeLimitGrowthBlocks != 0) {
            stakeLimitIncPerBlock = _data.maxStakeLimit / _data.maxStakeLimitGrowthBlocks;
        }
        uint256 blocksPassed = block.number - _data.prevStakeBlockNumber;
        uint256 projectedLimit = _data.prevStakeLimit + blocksPassed * stakeLimitIncPerBlock;
        limit = _constGasMin(
            projectedLimit,
            _data.maxStakeLimit
        );
    }
    /**
    * @notice check if staking is on pause
    */
    function isStakingPaused(StakeLimitState.Data memory _data) internal pure returns(bool) {
        return _data.prevStakeBlockNumber == 0;
    }
    /**
    * @notice check if staking limit is set (otherwise staking is unlimited)
    */
    function isStakingLimitSet(StakeLimitState.Data memory _data) internal pure returns(bool) {
        return _data.maxStakeLimit != 0;
    }
    /**
    * @notice update stake limit repr with the desired limits
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    * @param _maxStakeLimit stake limit max value
    * @param _stakeLimitIncreasePerBlock stake limit increase (restoration) per block
    */
    function setStakingLimit(
        StakeLimitState.Data memory _data,
        uint256 _maxStakeLimit,
        uint256 _stakeLimitIncreasePerBlock
    ) internal view returns (StakeLimitState.Data memory) {
        require(_maxStakeLimit != 0, "ZERO_MAX_STAKE_LIMIT");
        require(_maxStakeLimit <= uint96(-1), "TOO_LARGE_MAX_STAKE_LIMIT");
        require(_maxStakeLimit >= _stakeLimitIncreasePerBlock, "TOO_LARGE_LIMIT_INCREASE");
        require(
            (_stakeLimitIncreasePerBlock == 0)
            || (_maxStakeLimit / _stakeLimitIncreasePerBlock <= uint32(-1)),
            "TOO_SMALL_LIMIT_INCREASE"
        );
        // reset prev stake limit to the new max stake limit if
        if (
            // staking was paused or
            _data.prevStakeBlockNumber == 0 ||
            // staking was unlimited or
            _data.maxStakeLimit == 0 ||
            // new maximum limit value is lower than the value obtained on the previous stake submit
            _maxStakeLimit < _data.prevStakeLimit
        ) {
            _data.prevStakeLimit = uint96(_maxStakeLimit);
        }
        _data.maxStakeLimitGrowthBlocks =
            _stakeLimitIncreasePerBlock != 0 ? uint32(_maxStakeLimit / _stakeLimitIncreasePerBlock) : 0;
        _data.maxStakeLimit = uint96(_maxStakeLimit);
        if (_data.prevStakeBlockNumber != 0) {
            _data.prevStakeBlockNumber = uint32(block.number);
        }
        return _data;
    }
    /**
    * @notice update stake limit repr to remove the limit
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    */
    function removeStakingLimit(
        StakeLimitState.Data memory _data
    ) internal pure returns (StakeLimitState.Data memory) {
        _data.maxStakeLimit = 0;
        return _data;
    }
    /**
    * @notice update stake limit repr after submitting user's eth
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    * @param _newPrevStakeLimit new value for the `prevStakeLimit` field
    */
    function updatePrevStakeLimit(
        StakeLimitState.Data memory _data,
        uint256 _newPrevStakeLimit
    ) internal view returns (StakeLimitState.Data memory) {
        assert(_newPrevStakeLimit <= uint96(-1));
        assert(_data.prevStakeBlockNumber != 0);
        _data.prevStakeLimit = uint96(_newPrevStakeLimit);
        _data.prevStakeBlockNumber = uint32(block.number);
        return _data;
    }
    /**
    * @notice set stake limit pause state (on or off)
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    * @param _isPaused pause state flag
    */
    function setStakeLimitPauseState(
        StakeLimitState.Data memory _data,
        bool _isPaused
    ) internal view returns (StakeLimitState.Data memory) {
        _data.prevStakeBlockNumber = uint32(_isPaused ? 0 : block.number);
        return _data;
    }
    /**
     * @notice find a minimum of two numbers with a constant gas consumption
     * @dev doesn't use branching logic inside
     * @param _lhs left hand side value
     * @param _rhs right hand side value
     */
    function _constGasMin(uint256 _lhs, uint256 _rhs) internal pure returns (uint256 min) {
        uint256 lhsIsLess;
        assembly {
            lhsIsLess := lt(_lhs, _rhs) // lhsIsLess = (_lhs < _rhs) ? 1 : 0
        }
        min = (_lhs * lhsIsLess) + (_rhs * (1 - lhsIsLess));
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import "@aragon/os/contracts/apps/AragonApp.sol";
import "@aragon/os/contracts/lib/math/SafeMath.sol";
import "../common/interfaces/ILidoLocator.sol";
import "../common/interfaces/IBurner.sol";
import "./lib/StakeLimitUtils.sol";
import "../common/lib/Math256.sol";
import "./StETHPermit.sol";
import "./utils/Versioned.sol";
interface IPostTokenRebaseReceiver {
    function handlePostTokenRebase(
        uint256 _reportTimestamp,
        uint256 _timeElapsed,
        uint256 _preTotalShares,
        uint256 _preTotalEther,
        uint256 _postTotalShares,
        uint256 _postTotalEther,
        uint256 _sharesMintedAsFees
    ) external;
}
interface IOracleReportSanityChecker {
    function checkAccountingOracleReport(
        uint256 _timeElapsed,
        uint256 _preCLBalance,
        uint256 _postCLBalance,
        uint256 _withdrawalVaultBalance,
        uint256 _elRewardsVaultBalance,
        uint256 _sharesRequestedToBurn,
        uint256 _preCLValidators,
        uint256 _postCLValidators
    ) external view;
    function smoothenTokenRebase(
        uint256 _preTotalPooledEther,
        uint256 _preTotalShares,
        uint256 _preCLBalance,
        uint256 _postCLBalance,
        uint256 _withdrawalVaultBalance,
        uint256 _elRewardsVaultBalance,
        uint256 _sharesRequestedToBurn,
        uint256 _etherToLockForWithdrawals,
        uint256 _newSharesToBurnForWithdrawals
    ) external view returns (
        uint256 withdrawals,
        uint256 elRewards,
        uint256 simulatedSharesToBurn,
        uint256 sharesToBurn
    );
    function checkWithdrawalQueueOracleReport(
        uint256 _lastFinalizableRequestId,
        uint256 _reportTimestamp
    ) external view;
    function checkSimulatedShareRate(
        uint256 _postTotalPooledEther,
        uint256 _postTotalShares,
        uint256 _etherLockedOnWithdrawalQueue,
        uint256 _sharesBurntDueToWithdrawals,
        uint256 _simulatedShareRate
    ) external view;
}
interface ILidoExecutionLayerRewardsVault {
    function withdrawRewards(uint256 _maxAmount) external returns (uint256 amount);
}
interface IWithdrawalVault {
    function withdrawWithdrawals(uint256 _amount) external;
}
interface IStakingRouter {
    function deposit(
        uint256 _depositsCount,
        uint256 _stakingModuleId,
        bytes _depositCalldata
    ) external payable;
    function getStakingRewardsDistribution()
        external
        view
        returns (
            address[] memory recipients,
            uint256[] memory stakingModuleIds,
            uint96[] memory stakingModuleFees,
            uint96 totalFee,
            uint256 precisionPoints
        );
    function getWithdrawalCredentials() external view returns (bytes32);
    function reportRewardsMinted(uint256[] _stakingModuleIds, uint256[] _totalShares) external;
    function getTotalFeeE4Precision() external view returns (uint16 totalFee);
    function getStakingFeeAggregateDistributionE4Precision() external view returns (
        uint16 modulesFee, uint16 treasuryFee
    );
    function getStakingModuleMaxDepositsCount(uint256 _stakingModuleId, uint256 _maxDepositsValue)
        external
        view
        returns (uint256);
    function TOTAL_BASIS_POINTS() external view returns (uint256);
}
interface IWithdrawalQueue {
    function prefinalize(uint256[] _batches, uint256 _maxShareRate)
        external
        view
        returns (uint256 ethToLock, uint256 sharesToBurn);
    function finalize(uint256 _lastIdToFinalize, uint256 _maxShareRate) external payable;
    function isPaused() external view returns (bool);
    function unfinalizedStETH() external view returns (uint256);
    function isBunkerModeActive() external view returns (bool);
}
/**
* @title Liquid staking pool implementation
*
* Lido is an Ethereum liquid staking protocol solving the problem of frozen staked ether on Consensus Layer
* being unavailable for transfers and DeFi on Execution Layer.
*
* Since balances of all token holders change when the amount of total pooled Ether
* changes, this token cannot fully implement ERC20 standard: it only emits `Transfer`
* events upon explicit transfer between holders. In contrast, when Lido oracle reports
* rewards, no Transfer events are generated: doing so would require emitting an event
* for each token holder and thus running an unbounded loop.
*
* ---
* NB: Order of inheritance must preserve the structured storage layout of the previous versions.
*
* @dev Lido is derived from `StETHPermit` that has a structured storage:
* SLOT 0: mapping (address => uint256) private shares (`StETH`)
* SLOT 1: mapping (address => mapping (address => uint256)) private allowances (`StETH`)
* SLOT 2: mapping(address => uint256) internal noncesByAddress (`StETHPermit`)
*
* `Versioned` and `AragonApp` both don't have the pre-allocated structured storage.
*/
contract Lido is Versioned, StETHPermit, AragonApp {
    using SafeMath for uint256;
    using UnstructuredStorage for bytes32;
    using StakeLimitUnstructuredStorage for bytes32;
    using StakeLimitUtils for StakeLimitState.Data;
    /// ACL
    bytes32 public constant PAUSE_ROLE =
        0x139c2898040ef16910dc9f44dc697df79363da767d8bc92f2e310312b816e46d; // keccak256("PAUSE_ROLE");
    bytes32 public constant RESUME_ROLE =
        0x2fc10cc8ae19568712f7a176fb4978616a610650813c9d05326c34abb62749c7; // keccak256("RESUME_ROLE");
    bytes32 public constant STAKING_PAUSE_ROLE =
        0x84ea57490227bc2be925c684e2a367071d69890b629590198f4125a018eb1de8; // keccak256("STAKING_PAUSE_ROLE")
    bytes32 public constant STAKING_CONTROL_ROLE =
        0xa42eee1333c0758ba72be38e728b6dadb32ea767de5b4ddbaea1dae85b1b051f; // keccak256("STAKING_CONTROL_ROLE")
    bytes32 public constant UNSAFE_CHANGE_DEPOSITED_VALIDATORS_ROLE =
        0xe6dc5d79630c61871e99d341ad72c5a052bed2fc8c79e5a4480a7cd31117576c; // keccak256("UNSAFE_CHANGE_DEPOSITED_VALIDATORS_ROLE")
    uint256 private constant DEPOSIT_SIZE = 32 ether;
    /// @dev storage slot position for the Lido protocol contracts locator
    bytes32 internal constant LIDO_LOCATOR_POSITION =
        0x9ef78dff90f100ea94042bd00ccb978430524befc391d3e510b5f55ff3166df7; // keccak256("lido.Lido.lidoLocator")
    /// @dev storage slot position of the staking rate limit structure
    bytes32 internal constant STAKING_STATE_POSITION =
        0xa3678de4a579be090bed1177e0a24f77cc29d181ac22fd7688aca344d8938015; // keccak256("lido.Lido.stakeLimit");
    /// @dev amount of Ether (on the current Ethereum side) buffered on this smart contract balance
    bytes32 internal constant BUFFERED_ETHER_POSITION =
        0xed310af23f61f96daefbcd140b306c0bdbf8c178398299741687b90e794772b0; // keccak256("lido.Lido.bufferedEther");
    /// @dev number of deposited validators (incrementing counter of deposit operations).
    bytes32 internal constant DEPOSITED_VALIDATORS_POSITION =
        0xe6e35175eb53fc006520a2a9c3e9711a7c00de6ff2c32dd31df8c5a24cac1b5c; // keccak256("lido.Lido.depositedValidators");
    /// @dev total amount of ether on Consensus Layer (sum of all the balances of Lido validators)
    // "beacon" in the `keccak256()` parameter is staying here for compatibility reason
    bytes32 internal constant CL_BALANCE_POSITION =
        0xa66d35f054e68143c18f32c990ed5cb972bb68a68f500cd2dd3a16bbf3686483; // keccak256("lido.Lido.beaconBalance");
    /// @dev number of Lido's validators available in the Consensus Layer state
    // "beacon" in the `keccak256()` parameter is staying here for compatibility reason
    bytes32 internal constant CL_VALIDATORS_POSITION =
        0x9f70001d82b6ef54e9d3725b46581c3eb9ee3aa02b941b6aa54d678a9ca35b10; // keccak256("lido.Lido.beaconValidators");
    /// @dev Just a counter of total amount of execution layer rewards received by Lido contract. Not used in the logic.
    bytes32 internal constant TOTAL_EL_REWARDS_COLLECTED_POSITION =
        0xafe016039542d12eec0183bb0b1ffc2ca45b027126a494672fba4154ee77facb; // keccak256("lido.Lido.totalELRewardsCollected");
    // Staking was paused (don't accept user's ether submits)
    event StakingPaused();
    // Staking was resumed (accept user's ether submits)
    event StakingResumed();
    // Staking limit was set (rate limits user's submits)
    event StakingLimitSet(uint256 maxStakeLimit, uint256 stakeLimitIncreasePerBlock);
    // Staking limit was removed
    event StakingLimitRemoved();
    // Emits when validators number delivered by the oracle
    event CLValidatorsUpdated(
        uint256 indexed reportTimestamp,
        uint256 preCLValidators,
        uint256 postCLValidators
    );
    // Emits when var at `DEPOSITED_VALIDATORS_POSITION` changed
    event DepositedValidatorsChanged(
        uint256 depositedValidators
    );
    // Emits when oracle accounting report processed
    event ETHDistributed(
        uint256 indexed reportTimestamp,
        uint256 preCLBalance,
        uint256 postCLBalance,
        uint256 withdrawalsWithdrawn,
        uint256 executionLayerRewardsWithdrawn,
        uint256 postBufferedEther
    );
    // Emits when token rebased (total supply and/or total shares were changed)
    event TokenRebased(
        uint256 indexed reportTimestamp,
        uint256 timeElapsed,
        uint256 preTotalShares,
        uint256 preTotalEther,
        uint256 postTotalShares,
        uint256 postTotalEther,
        uint256 sharesMintedAsFees
    );
    // Lido locator set
    event LidoLocatorSet(address lidoLocator);
    // The amount of ETH withdrawn from LidoExecutionLayerRewardsVault to Lido
    event ELRewardsReceived(uint256 amount);
    // The amount of ETH withdrawn from WithdrawalVault to Lido
    event WithdrawalsReceived(uint256 amount);
    // Records a deposit made by a user
    event Submitted(address indexed sender, uint256 amount, address referral);
    // The `amount` of ether was sent to the deposit_contract.deposit function
    event Unbuffered(uint256 amount);
    /**
    * @dev As AragonApp, Lido contract must be initialized with following variables:
    *      NB: by default, staking and the whole Lido pool are in paused state
    *
    * The contract's balance must be non-zero to allow initial holder bootstrap.
    *
    * @param _lidoLocator lido locator contract
    * @param _eip712StETH eip712 helper contract for StETH
    */
    function initialize(address _lidoLocator, address _eip712StETH)
        public
        payable
        onlyInit
    {
        _bootstrapInitialHolder();
        _initialize_v2(_lidoLocator, _eip712StETH);
        initialized();
    }
    /**
     * initializer for the Lido version "2"
     */
    function _initialize_v2(address _lidoLocator, address _eip712StETH) internal {
        _setContractVersion(2);
        LIDO_LOCATOR_POSITION.setStorageAddress(_lidoLocator);
        _initializeEIP712StETH(_eip712StETH);
        // set infinite allowance for burner from withdrawal queue
        // to burn finalized requests' shares
        _approve(
            ILidoLocator(_lidoLocator).withdrawalQueue(),
            ILidoLocator(_lidoLocator).burner(),
            INFINITE_ALLOWANCE
        );
        emit LidoLocatorSet(_lidoLocator);
    }
    /**
     * @notice A function to finalize upgrade to v2 (from v1). Can be called only once
     * @dev Value "1" in CONTRACT_VERSION_POSITION is skipped due to change in numbering
     *
     * The initial protocol token holder must exist.
     *
     * For more details see https://github.com/lidofinance/lido-improvement-proposals/blob/develop/LIPS/lip-10.md
     */
    function finalizeUpgrade_v2(address _lidoLocator, address _eip712StETH) external {
        _checkContractVersion(0);
        require(hasInitialized(), "NOT_INITIALIZED");
        require(_lidoLocator != address(0), "LIDO_LOCATOR_ZERO_ADDRESS");
        require(_eip712StETH != address(0), "EIP712_STETH_ZERO_ADDRESS");
        require(_sharesOf(INITIAL_TOKEN_HOLDER) != 0, "INITIAL_HOLDER_EXISTS");
        _initialize_v2(_lidoLocator, _eip712StETH);
    }
    /**
     * @notice Stops accepting new Ether to the protocol
     *
     * @dev While accepting new Ether is stopped, calls to the `submit` function,
     * as well as to the default payable function, will revert.
     *
     * Emits `StakingPaused` event.
     */
    function pauseStaking() external {
        _auth(STAKING_PAUSE_ROLE);
        _pauseStaking();
    }
    /**
     * @notice Resumes accepting new Ether to the protocol (if `pauseStaking` was called previously)
     * NB: Staking could be rate-limited by imposing a limit on the stake amount
     * at each moment in time, see `setStakingLimit()` and `removeStakingLimit()`
     *
     * @dev Preserves staking limit if it was set previously
     *
     * Emits `StakingResumed` event
     */
    function resumeStaking() external {
        _auth(STAKING_CONTROL_ROLE);
        require(hasInitialized(), "NOT_INITIALIZED");
        _resumeStaking();
    }
    /**
     * @notice Sets the staking rate limit
     *
     * ▲ Stake limit
     * │.....  .....   ........ ...            ....     ... Stake limit = max
     * │      .       .        .   .   .      .    . . .
     * │     .       .              . .  . . .      . .
     * │            .                .  . . .
     * │──────────────────────────────────────────────────> Time
     * │     ^      ^          ^   ^^^  ^ ^ ^     ^^^ ^     Stake events
     *
     * @dev Reverts if:
     * - `_maxStakeLimit` == 0
     * - `_maxStakeLimit` >= 2^96
     * - `_maxStakeLimit` < `_stakeLimitIncreasePerBlock`
     * - `_maxStakeLimit` / `_stakeLimitIncreasePerBlock` >= 2^32 (only if `_stakeLimitIncreasePerBlock` != 0)
     *
     * Emits `StakingLimitSet` event
     *
     * @param _maxStakeLimit max stake limit value
     * @param _stakeLimitIncreasePerBlock stake limit increase per single block
     */
    function setStakingLimit(uint256 _maxStakeLimit, uint256 _stakeLimitIncreasePerBlock) external {
        _auth(STAKING_CONTROL_ROLE);
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(
            STAKING_STATE_POSITION.getStorageStakeLimitStruct().setStakingLimit(_maxStakeLimit, _stakeLimitIncreasePerBlock)
        );
        emit StakingLimitSet(_maxStakeLimit, _stakeLimitIncreasePerBlock);
    }
    /**
     * @notice Removes the staking rate limit
     *
     * Emits `StakingLimitRemoved` event
     */
    function removeStakingLimit() external {
        _auth(STAKING_CONTROL_ROLE);
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(STAKING_STATE_POSITION.getStorageStakeLimitStruct().removeStakingLimit());
        emit StakingLimitRemoved();
    }
    /**
     * @notice Check staking state: whether it's paused or not
     */
    function isStakingPaused() external view returns (bool) {
        return STAKING_STATE_POSITION.getStorageStakeLimitStruct().isStakingPaused();
    }
    /**
     * @notice Returns how much Ether can be staked in the current block
     * @dev Special return values:
     * - 2^256 - 1 if staking is unlimited;
     * - 0 if staking is paused or if limit is exhausted.
     */
    function getCurrentStakeLimit() external view returns (uint256) {
        return _getCurrentStakeLimit(STAKING_STATE_POSITION.getStorageStakeLimitStruct());
    }
    /**
     * @notice Returns full info about current stake limit params and state
     * @dev Might be used for the advanced integration requests.
     * @return isStakingPaused staking pause state (equivalent to return of isStakingPaused())
     * @return isStakingLimitSet whether the stake limit is set
     * @return currentStakeLimit current stake limit (equivalent to return of getCurrentStakeLimit())
     * @return maxStakeLimit max stake limit
     * @return maxStakeLimitGrowthBlocks blocks needed to restore max stake limit from the fully exhausted state
     * @return prevStakeLimit previously reached stake limit
     * @return prevStakeBlockNumber previously seen block number
     */
    function getStakeLimitFullInfo()
        external
        view
        returns (
            bool isStakingPaused,
            bool isStakingLimitSet,
            uint256 currentStakeLimit,
            uint256 maxStakeLimit,
            uint256 maxStakeLimitGrowthBlocks,
            uint256 prevStakeLimit,
            uint256 prevStakeBlockNumber
        )
    {
        StakeLimitState.Data memory stakeLimitData = STAKING_STATE_POSITION.getStorageStakeLimitStruct();
        isStakingPaused = stakeLimitData.isStakingPaused();
        isStakingLimitSet = stakeLimitData.isStakingLimitSet();
        currentStakeLimit = _getCurrentStakeLimit(stakeLimitData);
        maxStakeLimit = stakeLimitData.maxStakeLimit;
        maxStakeLimitGrowthBlocks = stakeLimitData.maxStakeLimitGrowthBlocks;
        prevStakeLimit = stakeLimitData.prevStakeLimit;
        prevStakeBlockNumber = stakeLimitData.prevStakeBlockNumber;
    }
    /**
    * @notice Send funds to the pool
    * @dev Users are able to submit their funds by transacting to the fallback function.
    * Unlike vanilla Ethereum Deposit contract, accepting only 32-Ether transactions, Lido
    * accepts payments of any size. Submitted Ethers are stored in Buffer until someone calls
    * deposit() and pushes them to the Ethereum Deposit contract.
    */
    // solhint-disable-next-line no-complex-fallback
    function() external payable {
        // protection against accidental submissions by calling non-existent function
        require(msg.data.length == 0, "NON_EMPTY_DATA");
        _submit(0);
    }
    /**
     * @notice Send funds to the pool with optional _referral parameter
     * @dev This function is alternative way to submit funds. Supports optional referral address.
     * @return Amount of StETH shares generated
     */
    function submit(address _referral) external payable returns (uint256) {
        return _submit(_referral);
    }
    /**
     * @notice A payable function for execution layer rewards. Can be called only by `ExecutionLayerRewardsVault`
     * @dev We need a dedicated function because funds received by the default payable function
     * are treated as a user deposit
     */
    function receiveELRewards() external payable {
        require(msg.sender == getLidoLocator().elRewardsVault());
        TOTAL_EL_REWARDS_COLLECTED_POSITION.setStorageUint256(getTotalELRewardsCollected().add(msg.value));
        emit ELRewardsReceived(msg.value);
    }
    /**
    * @notice A payable function for withdrawals acquisition. Can be called only by `WithdrawalVault`
    * @dev We need a dedicated function because funds received by the default payable function
    * are treated as a user deposit
    */
    function receiveWithdrawals() external payable {
        require(msg.sender == getLidoLocator().withdrawalVault());
        emit WithdrawalsReceived(msg.value);
    }
    /**
     * @notice Stop pool routine operations
     */
    function stop() external {
        _auth(PAUSE_ROLE);
        _stop();
        _pauseStaking();
    }
    /**
     * @notice Resume pool routine operations
     * @dev Staking is resumed after this call using the previously set limits (if any)
     */
    function resume() external {
        _auth(RESUME_ROLE);
        _resume();
        _resumeStaking();
    }
    /**
     * The structure is used to aggregate the `handleOracleReport` provided data.
     * @dev Using the in-memory structure addresses `stack too deep` issues.
     */
    struct OracleReportedData {
        // Oracle timings
        uint256 reportTimestamp;
        uint256 timeElapsed;
        // CL values
        uint256 clValidators;
        uint256 postCLBalance;
        // EL values
        uint256 withdrawalVaultBalance;
        uint256 elRewardsVaultBalance;
        uint256 sharesRequestedToBurn;
        // Decision about withdrawals processing
        uint256[] withdrawalFinalizationBatches;
        uint256 simulatedShareRate;
    }
    /**
     * The structure is used to preload the contract using `getLidoLocator()` via single call
     */
    struct OracleReportContracts {
        address accountingOracle;
        address elRewardsVault;
        address oracleReportSanityChecker;
        address burner;
        address withdrawalQueue;
        address withdrawalVault;
        address postTokenRebaseReceiver;
    }
    /**
    * @notice Updates accounting stats, collects EL rewards and distributes collected rewards
    *         if beacon balance increased, performs withdrawal requests finalization
    * @dev periodically called by the AccountingOracle contract
    *
    * @param _reportTimestamp the moment of the oracle report calculation
    * @param _timeElapsed seconds elapsed since the previous report calculation
    * @param _clValidators number of Lido validators on Consensus Layer
    * @param _clBalance sum of all Lido validators' balances on Consensus Layer
    * @param _withdrawalVaultBalance withdrawal vault balance on Execution Layer at `_reportTimestamp`
    * @param _elRewardsVaultBalance elRewards vault balance on Execution Layer at `_reportTimestamp`
    * @param _sharesRequestedToBurn shares requested to burn through Burner at `_reportTimestamp`
    * @param _withdrawalFinalizationBatches the ascendingly-sorted array of withdrawal request IDs obtained by calling
    * WithdrawalQueue.calculateFinalizationBatches. Empty array means that no withdrawal requests should be finalized
    * @param _simulatedShareRate share rate that was simulated by oracle when the report data created (1e27 precision)
    *
    * NB: `_simulatedShareRate` should be calculated off-chain by calling the method with `eth_call` JSON-RPC API
    * while passing empty `_withdrawalFinalizationBatches` and `_simulatedShareRate` == 0, plugging the returned values
    * to the following formula: `_simulatedShareRate = (postTotalPooledEther * 1e27) / postTotalShares`
    *
    * @return postRebaseAmounts[0]: `postTotalPooledEther` amount of ether in the protocol after report
    * @return postRebaseAmounts[1]: `postTotalShares` amount of shares in the protocol after report
    * @return postRebaseAmounts[2]: `withdrawals` withdrawn from the withdrawals vault
    * @return postRebaseAmounts[3]: `elRewards` withdrawn from the execution layer rewards vault
    */
    function handleOracleReport(
        // Oracle timings
        uint256 _reportTimestamp,
        uint256 _timeElapsed,
        // CL values
        uint256 _clValidators,
        uint256 _clBalance,
        // EL values
        uint256 _withdrawalVaultBalance,
        uint256 _elRewardsVaultBalance,
        uint256 _sharesRequestedToBurn,
        // Decision about withdrawals processing
        uint256[] _withdrawalFinalizationBatches,
        uint256 _simulatedShareRate
    ) external returns (uint256[4] postRebaseAmounts) {
        _whenNotStopped();
        return _handleOracleReport(
            OracleReportedData(
                _reportTimestamp,
                _timeElapsed,
                _clValidators,
                _clBalance,
                _withdrawalVaultBalance,
                _elRewardsVaultBalance,
                _sharesRequestedToBurn,
                _withdrawalFinalizationBatches,
                _simulatedShareRate
            )
        );
    }
    /**
     * @notice Unsafely change deposited validators
     *
     * The method unsafely changes deposited validator counter.
     * Can be required when onboarding external validators to Lido
     * (i.e., had deposited before and rotated their type-0x00 withdrawal credentials to Lido)
     *
     * @param _newDepositedValidators new value
     */
    function unsafeChangeDepositedValidators(uint256 _newDepositedValidators) external {
        _auth(UNSAFE_CHANGE_DEPOSITED_VALIDATORS_ROLE);
        DEPOSITED_VALIDATORS_POSITION.setStorageUint256(_newDepositedValidators);
        emit DepositedValidatorsChanged(_newDepositedValidators);
    }
    /**
     * @notice Overrides default AragonApp behaviour to disallow recovery.
     */
    function transferToVault(address /* _token */) external {
        revert("NOT_SUPPORTED");
    }
    /**
    * @notice Get the amount of Ether temporary buffered on this contract balance
    * @dev Buffered balance is kept on the contract from the moment the funds are received from user
    * until the moment they are actually sent to the official Deposit contract.
    * @return amount of buffered funds in wei
    */
    function getBufferedEther() external view returns (uint256) {
        return _getBufferedEther();
    }
    /**
     * @notice Get total amount of execution layer rewards collected to Lido contract
     * @dev Ether got through LidoExecutionLayerRewardsVault is kept on this contract's balance the same way
     * as other buffered Ether is kept (until it gets deposited)
     * @return amount of funds received as execution layer rewards in wei
     */
    function getTotalELRewardsCollected() public view returns (uint256) {
        return TOTAL_EL_REWARDS_COLLECTED_POSITION.getStorageUint256();
    }
    /**
     * @notice Gets authorized oracle address
     * @return address of oracle contract
     */
    function getLidoLocator() public view returns (ILidoLocator) {
        return ILidoLocator(LIDO_LOCATOR_POSITION.getStorageAddress());
    }
    /**
    * @notice Returns the key values related to Consensus Layer side of the contract. It historically contains beacon
    * @return depositedValidators - number of deposited validators from Lido contract side
    * @return beaconValidators - number of Lido validators visible on Consensus Layer, reported by oracle
    * @return beaconBalance - total amount of ether on the Consensus Layer side (sum of all the balances of Lido validators)
    *
    * @dev `beacon` in naming still here for historical reasons
    */
    function getBeaconStat() external view returns (uint256 depositedValidators, uint256 beaconValidators, uint256 beaconBalance) {
        depositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256();
        beaconValidators = CL_VALIDATORS_POSITION.getStorageUint256();
        beaconBalance = CL_BALANCE_POSITION.getStorageUint256();
    }
    /**
     * @dev Check that Lido allows depositing buffered ether to the consensus layer
     * Depends on the bunker state and protocol's pause state
     */
    function canDeposit() public view returns (bool) {
        return !_withdrawalQueue().isBunkerModeActive() && !isStopped();
    }
    /**
     * @dev Returns depositable ether amount.
     * Takes into account unfinalized stETH required by WithdrawalQueue
     */
    function getDepositableEther() public view returns (uint256) {
        uint256 bufferedEther = _getBufferedEther();
        uint256 withdrawalReserve = _withdrawalQueue().unfinalizedStETH();
        return bufferedEther > withdrawalReserve ? bufferedEther - withdrawalReserve : 0;
    }
    /**
     * @dev Invokes a deposit call to the Staking Router contract and updates buffered counters
     * @param _maxDepositsCount max deposits count
     * @param _stakingModuleId id of the staking module to be deposited
     * @param _depositCalldata module calldata
     */
    function deposit(uint256 _maxDepositsCount, uint256 _stakingModuleId, bytes _depositCalldata) external {
        ILidoLocator locator = getLidoLocator();
        require(msg.sender == locator.depositSecurityModule(), "APP_AUTH_DSM_FAILED");
        require(canDeposit(), "CAN_NOT_DEPOSIT");
        IStakingRouter stakingRouter = _stakingRouter();
        uint256 depositsCount = Math256.min(
            _maxDepositsCount,
            stakingRouter.getStakingModuleMaxDepositsCount(_stakingModuleId, getDepositableEther())
        );
        uint256 depositsValue;
        if (depositsCount > 0) {
            depositsValue = depositsCount.mul(DEPOSIT_SIZE);
            /// @dev firstly update the local state of the contract to prevent a reentrancy attack,
            ///     even if the StakingRouter is a trusted contract.
            BUFFERED_ETHER_POSITION.setStorageUint256(_getBufferedEther().sub(depositsValue));
            emit Unbuffered(depositsValue);
            uint256 newDepositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256().add(depositsCount);
            DEPOSITED_VALIDATORS_POSITION.setStorageUint256(newDepositedValidators);
            emit DepositedValidatorsChanged(newDepositedValidators);
        }
        /// @dev transfer ether to StakingRouter and make a deposit at the same time. All the ether
        ///     sent to StakingRouter is counted as deposited. If StakingRouter can't deposit all
        ///     passed ether it MUST revert the whole transaction (never happens in normal circumstances)
        stakingRouter.deposit.value(depositsValue)(depositsCount, _stakingModuleId, _depositCalldata);
    }
    /// DEPRECATED PUBLIC METHODS
    /**
     * @notice Returns current withdrawal credentials of deposited validators
     * @dev DEPRECATED: use StakingRouter.getWithdrawalCredentials() instead
     */
    function getWithdrawalCredentials() external view returns (bytes32) {
        return _stakingRouter().getWithdrawalCredentials();
    }
    /**
     * @notice Returns legacy oracle
     * @dev DEPRECATED: the `AccountingOracle` superseded the old one
     */
    function getOracle() external view returns (address) {
        return getLidoLocator().legacyOracle();
    }
    /**
     * @notice Returns the treasury address
     * @dev DEPRECATED: use LidoLocator.treasury()
     */
    function getTreasury() external view returns (address) {
        return _treasury();
    }
    /**
     * @notice Returns current staking rewards fee rate
     * @dev DEPRECATED: Now fees information is stored in StakingRouter and
     * with higher precision. Use StakingRouter.getStakingFeeAggregateDistribution() instead.
     * @return totalFee total rewards fee in 1e4 precision (10000 is 100%). The value might be
     * inaccurate because the actual value is truncated here to 1e4 precision.
     */
    function getFee() external view returns (uint16 totalFee) {
        totalFee = _stakingRouter().getTotalFeeE4Precision();
    }
    /**
     * @notice Returns current fee distribution, values relative to the total fee (getFee())
     * @dev DEPRECATED: Now fees information is stored in StakingRouter and
     * with higher precision. Use StakingRouter.getStakingFeeAggregateDistribution() instead.
     * @return treasuryFeeBasisPoints return treasury fee in TOTAL_BASIS_POINTS (10000 is 100% fee) precision
     * @return insuranceFeeBasisPoints always returns 0 because the capability to send fees to
     * insurance from Lido contract is removed.
     * @return operatorsFeeBasisPoints return total fee for all operators of all staking modules in
     * TOTAL_BASIS_POINTS (10000 is 100% fee) precision.
     * Previously returned total fee of all node operators of NodeOperatorsRegistry (Curated staking module now)
     * The value might be inaccurate because the actual value is truncated here to 1e4 precision.
     */
    function getFeeDistribution()
        external view
        returns (
            uint16 treasuryFeeBasisPoints,
            uint16 insuranceFeeBasisPoints,
            uint16 operatorsFeeBasisPoints
        )
    {
        IStakingRouter stakingRouter = _stakingRouter();
        uint256 totalBasisPoints = stakingRouter.TOTAL_BASIS_POINTS();
        uint256 totalFee = stakingRouter.getTotalFeeE4Precision();
        (uint256 treasuryFeeBasisPointsAbs, uint256 operatorsFeeBasisPointsAbs) = stakingRouter
            .getStakingFeeAggregateDistributionE4Precision();
        insuranceFeeBasisPoints = 0;  // explicitly set to zero
        treasuryFeeBasisPoints = uint16((treasuryFeeBasisPointsAbs * totalBasisPoints) / totalFee);
        operatorsFeeBasisPoints = uint16((operatorsFeeBasisPointsAbs * totalBasisPoints) / totalFee);
    }
    /*
     * @dev updates Consensus Layer state snapshot according to the current report
     *
     * NB: conventions and assumptions
     *
     * `depositedValidators` are total amount of the **ever** deposited Lido validators
     * `_postClValidators` are total amount of the **ever** appeared on the CL side Lido validators
     *
     * i.e., exited Lido validators persist in the state, just with a different status
     */
    function _processClStateUpdate(
        uint256 _reportTimestamp,
        uint256 _preClValidators,
        uint256 _postClValidators,
        uint256 _postClBalance
    ) internal returns (uint256 preCLBalance) {
        uint256 depositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256();
        require(_postClValidators <= depositedValidators, "REPORTED_MORE_DEPOSITED");
        require(_postClValidators >= _preClValidators, "REPORTED_LESS_VALIDATORS");
        if (_postClValidators > _preClValidators) {
            CL_VALIDATORS_POSITION.setStorageUint256(_postClValidators);
        }
        uint256 appearedValidators = _postClValidators - _preClValidators;
        preCLBalance = CL_BALANCE_POSITION.getStorageUint256();
        // Take into account the balance of the newly appeared validators
        preCLBalance = preCLBalance.add(appearedValidators.mul(DEPOSIT_SIZE));
        // Save the current CL balance and validators to
        // calculate rewards on the next push
        CL_BALANCE_POSITION.setStorageUint256(_postClBalance);
        emit CLValidatorsUpdated(_reportTimestamp, _preClValidators, _postClValidators);
    }
    /**
     * @dev collect ETH from ELRewardsVault and WithdrawalVault, then send to WithdrawalQueue
     */
    function _collectRewardsAndProcessWithdrawals(
        OracleReportContracts memory _contracts,
        uint256 _withdrawalsToWithdraw,
        uint256 _elRewardsToWithdraw,
        uint256[] _withdrawalFinalizationBatches,
        uint256 _simulatedShareRate,
        uint256 _etherToLockOnWithdrawalQueue
    ) internal {
        // withdraw execution layer rewards and put them to the buffer
        if (_elRewardsToWithdraw > 0) {
            ILidoExecutionLayerRewardsVault(_contracts.elRewardsVault).withdrawRewards(_elRewardsToWithdraw);
        }
        // withdraw withdrawals and put them to the buffer
        if (_withdrawalsToWithdraw > 0) {
            IWithdrawalVault(_contracts.withdrawalVault).withdrawWithdrawals(_withdrawalsToWithdraw);
        }
        // finalize withdrawals (send ether, assign shares for burning)
        if (_etherToLockOnWithdrawalQueue > 0) {
            IWithdrawalQueue withdrawalQueue = IWithdrawalQueue(_contracts.withdrawalQueue);
            withdrawalQueue.finalize.value(_etherToLockOnWithdrawalQueue)(
                _withdrawalFinalizationBatches[_withdrawalFinalizationBatches.length - 1],
                _simulatedShareRate
            );
        }
        uint256 postBufferedEther = _getBufferedEther()
            .add(_elRewardsToWithdraw) // Collected from ELVault
            .add(_withdrawalsToWithdraw) // Collected from WithdrawalVault
            .sub(_etherToLockOnWithdrawalQueue); // Sent to WithdrawalQueue
        _setBufferedEther(postBufferedEther);
    }
    /**
     * @dev return amount to lock on withdrawal queue and shares to burn
     * depending on the finalization batch parameters
     */
    function _calculateWithdrawals(
        OracleReportContracts memory _contracts,
        OracleReportedData memory _reportedData
    ) internal view returns (
        uint256 etherToLock, uint256 sharesToBurn
    ) {
        IWithdrawalQueue withdrawalQueue = IWithdrawalQueue(_contracts.withdrawalQueue);
        if (!withdrawalQueue.isPaused()) {
            IOracleReportSanityChecker(_contracts.oracleReportSanityChecker).checkWithdrawalQueueOracleReport(
                _reportedData.withdrawalFinalizationBatches[_reportedData.withdrawalFinalizationBatches.length - 1],
                _reportedData.reportTimestamp
            );
            (etherToLock, sharesToBurn) = withdrawalQueue.prefinalize(
                _reportedData.withdrawalFinalizationBatches,
                _reportedData.simulatedShareRate
            );
        }
    }
    /**
     * @dev calculate the amount of rewards and distribute it
     */
    function _processRewards(
        OracleReportContext memory _reportContext,
        uint256 _postCLBalance,
        uint256 _withdrawnWithdrawals,
        uint256 _withdrawnElRewards
    ) internal returns (uint256 sharesMintedAsFees) {
        uint256 postCLTotalBalance = _postCLBalance.add(_withdrawnWithdrawals);
        // Don’t mint/distribute any protocol fee on the non-profitable Lido oracle report
        // (when consensus layer balance delta is zero or negative).
        // See LIP-12 for details:
        // https://research.lido.fi/t/lip-12-on-chain-part-of-the-rewards-distribution-after-the-merge/1625
        if (postCLTotalBalance > _reportContext.preCLBalance) {
            uint256 consensusLayerRewards = postCLTotalBalance - _reportContext.preCLBalance;
            sharesMintedAsFees = _distributeFee(
                _reportContext.preTotalPooledEther,
                _reportContext.preTotalShares,
                consensusLayerRewards.add(_withdrawnElRewards)
            );
        }
    }
    /**
     * @dev Process user deposit, mints liquid tokens and increase the pool buffer
     * @param _referral address of referral.
     * @return amount of StETH shares generated
     */
    function _submit(address _referral) internal returns (uint256) {
        require(msg.value != 0, "ZERO_DEPOSIT");
        StakeLimitState.Data memory stakeLimitData = STAKING_STATE_POSITION.getStorageStakeLimitStruct();
        // There is an invariant that protocol pause also implies staking pause.
        // Thus, no need to check protocol pause explicitly.
        require(!stakeLimitData.isStakingPaused(), "STAKING_PAUSED");
        if (stakeLimitData.isStakingLimitSet()) {
            uint256 currentStakeLimit = stakeLimitData.calculateCurrentStakeLimit();
            require(msg.value <= currentStakeLimit, "STAKE_LIMIT");
            STAKING_STATE_POSITION.setStorageStakeLimitStruct(stakeLimitData.updatePrevStakeLimit(currentStakeLimit - msg.value));
        }
        uint256 sharesAmount = getSharesByPooledEth(msg.value);
        _mintShares(msg.sender, sharesAmount);
        _setBufferedEther(_getBufferedEther().add(msg.value));
        emit Submitted(msg.sender, msg.value, _referral);
        _emitTransferAfterMintingShares(msg.sender, sharesAmount);
        return sharesAmount;
    }
    /**
     * @dev Staking router rewards distribution.
     *
     * Corresponds to the return value of `IStakingRouter.newTotalPooledEtherForRewards()`
     * Prevents `stack too deep` issue.
     */
    struct StakingRewardsDistribution {
        address[] recipients;
        uint256[] moduleIds;
        uint96[] modulesFees;
        uint96 totalFee;
        uint256 precisionPoints;
    }
    /**
     * @dev Get staking rewards distribution from staking router.
     */
    function _getStakingRewardsDistribution() internal view returns (
        StakingRewardsDistribution memory ret,
        IStakingRouter router
    ) {
        router = _stakingRouter();
        (
            ret.recipients,
            ret.moduleIds,
            ret.modulesFees,
            ret.totalFee,
            ret.precisionPoints
        ) = router.getStakingRewardsDistribution();
        require(ret.recipients.length == ret.modulesFees.length, "WRONG_RECIPIENTS_INPUT");
        require(ret.moduleIds.length == ret.modulesFees.length, "WRONG_MODULE_IDS_INPUT");
    }
    /**
     * @dev Distributes fee portion of the rewards by minting and distributing corresponding amount of liquid tokens.
     * @param _preTotalPooledEther Total supply before report-induced changes applied
     * @param _preTotalShares Total shares before report-induced changes applied
     * @param _totalRewards Total rewards accrued both on the Execution Layer and the Consensus Layer sides in wei.
     */
    function _distributeFee(
        uint256 _preTotalPooledEther,
        uint256 _preTotalShares,
        uint256 _totalRewards
    ) internal returns (uint256 sharesMintedAsFees) {
        // We need to take a defined percentage of the reported reward as a fee, and we do
        // this by minting new token shares and assigning them to the fee recipients (see
        // StETH docs for the explanation of the shares mechanics). The staking rewards fee
        // is defined in basis points (1 basis point is equal to 0.01%, 10000 (TOTAL_BASIS_POINTS) is 100%).
        //
        // Since we are increasing totalPooledEther by _totalRewards (totalPooledEtherWithRewards),
        // the combined cost of all holders' shares has became _totalRewards StETH tokens more,
        // effectively splitting the reward between each token holder proportionally to their token share.
        //
        // Now we want to mint new shares to the fee recipient, so that the total cost of the
        // newly-minted shares exactly corresponds to the fee taken:
        //
        // totalPooledEtherWithRewards = _preTotalPooledEther + _totalRewards
        // shares2mint * newShareCost = (_totalRewards * totalFee) / PRECISION_POINTS
        // newShareCost = totalPooledEtherWithRewards / (_preTotalShares + shares2mint)
        //
        // which follows to:
        //
        //                        _totalRewards * totalFee * _preTotalShares
        // shares2mint = --------------------------------------------------------------
        //                 (totalPooledEtherWithRewards * PRECISION_POINTS) - (_totalRewards * totalFee)
        //
        // The effect is that the given percentage of the reward goes to the fee recipient, and
        // the rest of the reward is distributed between token holders proportionally to their
        // token shares.
        (
            StakingRewardsDistribution memory rewardsDistribution,
            IStakingRouter router
        ) = _getStakingRewardsDistribution();
        if (rewardsDistribution.totalFee > 0) {
            uint256 totalPooledEtherWithRewards = _preTotalPooledEther.add(_totalRewards);
            sharesMintedAsFees =
                _totalRewards.mul(rewardsDistribution.totalFee).mul(_preTotalShares).div(
                    totalPooledEtherWithRewards.mul(
                        rewardsDistribution.precisionPoints
                    ).sub(_totalRewards.mul(rewardsDistribution.totalFee))
                );
            _mintShares(address(this), sharesMintedAsFees);
            (uint256[] memory moduleRewards, uint256 totalModuleRewards) =
                _transferModuleRewards(
                    rewardsDistribution.recipients,
                    rewardsDistribution.modulesFees,
                    rewardsDistribution.totalFee,
                    sharesMintedAsFees
                );
            _transferTreasuryRewards(sharesMintedAsFees.sub(totalModuleRewards));
            router.reportRewardsMinted(
                rewardsDistribution.moduleIds,
                moduleRewards
            );
        }
    }
    function _transferModuleRewards(
        address[] memory recipients,
        uint96[] memory modulesFees,
        uint256 totalFee,
        uint256 totalRewards
    ) internal returns (uint256[] memory moduleRewards, uint256 totalModuleRewards) {
        moduleRewards = new uint256[](recipients.length);
        for (uint256 i; i < recipients.length; ++i) {
            if (modulesFees[i] > 0) {
                uint256 iModuleRewards = totalRewards.mul(modulesFees[i]).div(totalFee);
                moduleRewards[i] = iModuleRewards;
                _transferShares(address(this), recipients[i], iModuleRewards);
                _emitTransferAfterMintingShares(recipients[i], iModuleRewards);
                totalModuleRewards = totalModuleRewards.add(iModuleRewards);
            }
        }
    }
    function _transferTreasuryRewards(uint256 treasuryReward) internal {
        address treasury = _treasury();
        _transferShares(address(this), treasury, treasuryReward);
        _emitTransferAfterMintingShares(treasury, treasuryReward);
    }
    /**
     * @dev Gets the amount of Ether temporary buffered on this contract balance
     */
    function _getBufferedEther() internal view returns (uint256) {
        return BUFFERED_ETHER_POSITION.getStorageUint256();
    }
    function _setBufferedEther(uint256 _newBufferedEther) internal {
        BUFFERED_ETHER_POSITION.setStorageUint256(_newBufferedEther);
    }
    /// @dev Calculates and returns the total base balance (multiple of 32) of validators in transient state,
    ///     i.e. submitted to the official Deposit contract but not yet visible in the CL state.
    /// @return transient balance in wei (1e-18 Ether)
    function _getTransientBalance() internal view returns (uint256) {
        uint256 depositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256();
        uint256 clValidators = CL_VALIDATORS_POSITION.getStorageUint256();
        // clValidators can never be less than deposited ones.
        assert(depositedValidators >= clValidators);
        return (depositedValidators - clValidators).mul(DEPOSIT_SIZE);
    }
    /**
     * @dev Gets the total amount of Ether controlled by the system
     * @return total balance in wei
     */
    function _getTotalPooledEther() internal view returns (uint256) {
        return _getBufferedEther()
            .add(CL_BALANCE_POSITION.getStorageUint256())
            .add(_getTransientBalance());
    }
    function _pauseStaking() internal {
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(
            STAKING_STATE_POSITION.getStorageStakeLimitStruct().setStakeLimitPauseState(true)
        );
        emit StakingPaused();
    }
    function _resumeStaking() internal {
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(
            STAKING_STATE_POSITION.getStorageStakeLimitStruct().setStakeLimitPauseState(false)
        );
        emit StakingResumed();
    }
    function _getCurrentStakeLimit(StakeLimitState.Data memory _stakeLimitData) internal view returns (uint256) {
        if (_stakeLimitData.isStakingPaused()) {
            return 0;
        }
        if (!_stakeLimitData.isStakingLimitSet()) {
            return uint256(-1);
        }
        return _stakeLimitData.calculateCurrentStakeLimit();
    }
    /**
     * @dev Size-efficient analog of the `auth(_role)` modifier
     * @param _role Permission name
     */
    function _auth(bytes32 _role) internal view {
        require(canPerform(msg.sender, _role, new uint256[](0)), "APP_AUTH_FAILED");
    }
    /**
     * @dev Intermediate data structure for `_handleOracleReport`
     * Helps to overcome `stack too deep` issue.
     */
    struct OracleReportContext {
        uint256 preCLValidators;
        uint256 preCLBalance;
        uint256 preTotalPooledEther;
        uint256 preTotalShares;
        uint256 etherToLockOnWithdrawalQueue;
        uint256 sharesToBurnFromWithdrawalQueue;
        uint256 simulatedSharesToBurn;
        uint256 sharesToBurn;
        uint256 sharesMintedAsFees;
    }
    /**
     * @dev Handle oracle report method operating with the data-packed structs
     * Using structs helps to overcome 'stack too deep' issue.
     *
     * The method updates the protocol's accounting state.
     * Key steps:
     * 1. Take a snapshot of the current (pre-) state
     * 2. Pass the report data to sanity checker (reverts if malformed)
     * 3. Pre-calculate the ether to lock for withdrawal queue and shares to be burnt
     * 4. Pass the accounting values to sanity checker to smoothen positive token rebase
     *    (i.e., postpone the extra rewards to be applied during the next rounds)
     * 5. Invoke finalization of the withdrawal requests
     * 6. Burn excess shares within the allowed limit (can postpone some shares to be burnt later)
     * 7. Distribute protocol fee (treasury & node operators)
     * 8. Complete token rebase by informing observers (emit an event and call the external receivers if any)
     * 9. Sanity check for the provided simulated share rate
     */
    function _handleOracleReport(OracleReportedData memory _reportedData) internal returns (uint256[4]) {
        OracleReportContracts memory contracts = _loadOracleReportContracts();
        require(msg.sender == contracts.accountingOracle, "APP_AUTH_FAILED");
        require(_reportedData.reportTimestamp <= block.timestamp, "INVALID_REPORT_TIMESTAMP");
        OracleReportContext memory reportContext;
        // Step 1.
        // Take a snapshot of the current (pre-) state
        reportContext.preTotalPooledEther = _getTotalPooledEther();
        reportContext.preTotalShares = _getTotalShares();
        reportContext.preCLValidators = CL_VALIDATORS_POSITION.getStorageUint256();
        reportContext.preCLBalance = _processClStateUpdate(
            _reportedData.reportTimestamp,
            reportContext.preCLValidators,
            _reportedData.clValidators,
            _reportedData.postCLBalance
        );
        // Step 2.
        // Pass the report data to sanity checker (reverts if malformed)
        _checkAccountingOracleReport(contracts, _reportedData, reportContext);
        // Step 3.
        // Pre-calculate the ether to lock for withdrawal queue and shares to be burnt
        // due to withdrawal requests to finalize
        if (_reportedData.withdrawalFinalizationBatches.length != 0) {
            (
                reportContext.etherToLockOnWithdrawalQueue,
                reportContext.sharesToBurnFromWithdrawalQueue
            ) = _calculateWithdrawals(contracts, _reportedData);
            if (reportContext.sharesToBurnFromWithdrawalQueue > 0) {
                IBurner(contracts.burner).requestBurnShares(
                    contracts.withdrawalQueue,
                    reportContext.sharesToBurnFromWithdrawalQueue
                );
            }
        }
        // Step 4.
        // Pass the accounting values to sanity checker to smoothen positive token rebase
        uint256 withdrawals;
        uint256 elRewards;
        (
            withdrawals, elRewards, reportContext.simulatedSharesToBurn, reportContext.sharesToBurn
        ) = IOracleReportSanityChecker(contracts.oracleReportSanityChecker).smoothenTokenRebase(
            reportContext.preTotalPooledEther,
            reportContext.preTotalShares,
            reportContext.preCLBalance,
            _reportedData.postCLBalance,
            _reportedData.withdrawalVaultBalance,
            _reportedData.elRewardsVaultBalance,
            _reportedData.sharesRequestedToBurn,
            reportContext.etherToLockOnWithdrawalQueue,
            reportContext.sharesToBurnFromWithdrawalQueue
        );
        // Step 5.
        // Invoke finalization of the withdrawal requests (send ether to withdrawal queue, assign shares to be burnt)
        _collectRewardsAndProcessWithdrawals(
            contracts,
            withdrawals,
            elRewards,
            _reportedData.withdrawalFinalizationBatches,
            _reportedData.simulatedShareRate,
            reportContext.etherToLockOnWithdrawalQueue
        );
        emit ETHDistributed(
            _reportedData.reportTimestamp,
            reportContext.preCLBalance,
            _reportedData.postCLBalance,
            withdrawals,
            elRewards,
            _getBufferedEther()
        );
        // Step 6.
        // Burn the previously requested shares
        if (reportContext.sharesToBurn > 0) {
            IBurner(contracts.burner).commitSharesToBurn(reportContext.sharesToBurn);
            _burnShares(contracts.burner, reportContext.sharesToBurn);
        }
        // Step 7.
        // Distribute protocol fee (treasury & node operators)
        reportContext.sharesMintedAsFees = _processRewards(
            reportContext,
            _reportedData.postCLBalance,
            withdrawals,
            elRewards
        );
        // Step 8.
        // Complete token rebase by informing observers (emit an event and call the external receivers if any)
        (
            uint256 postTotalShares,
            uint256 postTotalPooledEther
        ) = _completeTokenRebase(
            _reportedData,
            reportContext,
            IPostTokenRebaseReceiver(contracts.postTokenRebaseReceiver)
        );
        // Step 9. Sanity check for the provided simulated share rate
        if (_reportedData.withdrawalFinalizationBatches.length != 0) {
            IOracleReportSanityChecker(contracts.oracleReportSanityChecker).checkSimulatedShareRate(
                postTotalPooledEther,
                postTotalShares,
                reportContext.etherToLockOnWithdrawalQueue,
                reportContext.sharesToBurn.sub(reportContext.simulatedSharesToBurn),
                _reportedData.simulatedShareRate
            );
        }
        return [postTotalPooledEther, postTotalShares, withdrawals, elRewards];
    }
    /**
     * @dev Pass the provided oracle data to the sanity checker contract
     * Works with structures to overcome `stack too deep`
     */
    function _checkAccountingOracleReport(
        OracleReportContracts memory _contracts,
        OracleReportedData memory _reportedData,
        OracleReportContext memory _reportContext
    ) internal view {
        IOracleReportSanityChecker(_contracts.oracleReportSanityChecker).checkAccountingOracleReport(
            _reportedData.timeElapsed,
            _reportContext.preCLBalance,
            _reportedData.postCLBalance,
            _reportedData.withdrawalVaultBalance,
            _reportedData.elRewardsVaultBalance,
            _reportedData.sharesRequestedToBurn,
            _reportContext.preCLValidators,
            _reportedData.clValidators
        );
    }
    /**
     * @dev Notify observers about the completed token rebase.
     * Emit events and call external receivers.
     */
    function _completeTokenRebase(
        OracleReportedData memory _reportedData,
        OracleReportContext memory _reportContext,
        IPostTokenRebaseReceiver _postTokenRebaseReceiver
    ) internal returns (uint256 postTotalShares, uint256 postTotalPooledEther) {
        postTotalShares = _getTotalShares();
        postTotalPooledEther = _getTotalPooledEther();
        if (_postTokenRebaseReceiver != address(0)) {
            _postTokenRebaseReceiver.handlePostTokenRebase(
                _reportedData.reportTimestamp,
                _reportedData.timeElapsed,
                _reportContext.preTotalShares,
                _reportContext.preTotalPooledEther,
                postTotalShares,
                postTotalPooledEther,
                _reportContext.sharesMintedAsFees
            );
        }
        emit TokenRebased(
            _reportedData.reportTimestamp,
            _reportedData.timeElapsed,
            _reportContext.preTotalShares,
            _reportContext.preTotalPooledEther,
            postTotalShares,
            postTotalPooledEther,
            _reportContext.sharesMintedAsFees
        );
    }
    /**
     * @dev Load the contracts used for `handleOracleReport` internally.
     */
    function _loadOracleReportContracts() internal view returns (OracleReportContracts memory ret) {
        (
            ret.accountingOracle,
            ret.elRewardsVault,
            ret.oracleReportSanityChecker,
            ret.burner,
            ret.withdrawalQueue,
            ret.withdrawalVault,
            ret.postTokenRebaseReceiver
        ) = getLidoLocator().oracleReportComponentsForLido();
    }
    function _stakingRouter() internal view returns (IStakingRouter) {
        return IStakingRouter(getLidoLocator().stakingRouter());
    }
    function _withdrawalQueue() internal view returns (IWithdrawalQueue) {
        return IWithdrawalQueue(getLidoLocator().withdrawalQueue());
    }
    function _treasury() internal view returns (address) {
        return getLidoLocator().treasury();
    }
    /**
     * @notice Mints shares on behalf of 0xdead address,
     * the shares amount is equal to the contract's balance.     *
     *
     * Allows to get rid of zero checks for `totalShares` and `totalPooledEther`
     * and overcome corner cases.
     *
     * NB: reverts if the current contract's balance is zero.
     *
     * @dev must be invoked before using the token
     */
    function _bootstrapInitialHolder() internal {
        uint256 balance = address(this).balance;
        assert(balance != 0);
        if (_getTotalShares() == 0) {
            // if protocol is empty bootstrap it with the contract's balance
            // address(0xdead) is a holder for initial shares
            _setBufferedEther(balance);
            // emitting `Submitted` before Transfer events to preserver events order in tx
            emit Submitted(INITIAL_TOKEN_HOLDER, balance, 0);
            _mintInitialShares(balance);
        }
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import "openzeppelin-solidity/contracts/token/ERC20/IERC20.sol";
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
import "@aragon/os/contracts/lib/math/SafeMath.sol";
import "./utils/Pausable.sol";
/**
 * @title Interest-bearing ERC20-like token for Lido Liquid Stacking protocol.
 *
 * This contract is abstract. To make the contract deployable override the
 * `_getTotalPooledEther` function. `Lido.sol` contract inherits StETH and defines
 * the `_getTotalPooledEther` function.
 *
 * StETH balances are dynamic and represent the holder's share in the total amount
 * of Ether controlled by the protocol. Account shares aren't normalized, so the
 * contract also stores the sum of all shares to calculate each account's token balance
 * which equals to:
 *
 *   shares[account] * _getTotalPooledEther() / _getTotalShares()
 *
 * For example, assume that we have:
 *
 *   _getTotalPooledEther() -> 10 ETH
 *   sharesOf(user1) -> 100
 *   sharesOf(user2) -> 400
 *
 * Therefore:
 *
 *   balanceOf(user1) -> 2 tokens which corresponds 2 ETH
 *   balanceOf(user2) -> 8 tokens which corresponds 8 ETH
 *
 * Since balances of all token holders change when the amount of total pooled Ether
 * changes, this token cannot fully implement ERC20 standard: it only emits `Transfer`
 * events upon explicit transfer between holders. In contrast, when total amount of
 * pooled Ether increases, no `Transfer` events are generated: doing so would require
 * emitting an event for each token holder and thus running an unbounded loop.
 *
 * The token inherits from `Pausable` and uses `whenNotStopped` modifier for methods
 * which change `shares` or `allowances`. `_stop` and `_resume` functions are overridden
 * in `Lido.sol` and might be called by an account with the `PAUSE_ROLE` assigned by the
 * DAO. This is useful for emergency scenarios, e.g. a protocol bug, where one might want
 * to freeze all token transfers and approvals until the emergency is resolved.
 */
contract StETH is IERC20, Pausable {
    using SafeMath for uint256;
    using UnstructuredStorage for bytes32;
    address constant internal INITIAL_TOKEN_HOLDER = 0xdead;
    uint256 constant internal INFINITE_ALLOWANCE = ~uint256(0);
    /**
     * @dev StETH balances are dynamic and are calculated based on the accounts' shares
     * and the total amount of Ether controlled by the protocol. Account shares aren't
     * normalized, so the contract also stores the sum of all shares to calculate
     * each account's token balance which equals to:
     *
     *   shares[account] * _getTotalPooledEther() / _getTotalShares()
    */
    mapping (address => uint256) private shares;
    /**
     * @dev Allowances are nominated in tokens, not token shares.
     */
    mapping (address => mapping (address => uint256)) private allowances;
    /**
     * @dev Storage position used for holding the total amount of shares in existence.
     *
     * The Lido protocol is built on top of Aragon and uses the Unstructured Storage pattern
     * for value types:
     *
     * https://blog.openzeppelin.com/upgradeability-using-unstructured-storage
     * https://blog.8bitzen.com/posts/20-02-2020-understanding-how-solidity-upgradeable-unstructured-proxies-work
     *
     * For reference types, conventional storage variables are used since it's non-trivial
     * and error-prone to implement reference-type unstructured storage using Solidity v0.4;
     * see https://github.com/lidofinance/lido-dao/issues/181#issuecomment-736098834
     *
     * keccak256("lido.StETH.totalShares")
     */
    bytes32 internal constant TOTAL_SHARES_POSITION =
        0xe3b4b636e601189b5f4c6742edf2538ac12bb61ed03e6da26949d69838fa447e;
    /**
      * @notice An executed shares transfer from `sender` to `recipient`.
      *
      * @dev emitted in pair with an ERC20-defined `Transfer` event.
      */
    event TransferShares(
        address indexed from,
        address indexed to,
        uint256 sharesValue
    );
    /**
     * @notice An executed `burnShares` request
     *
     * @dev Reports simultaneously burnt shares amount
     * and corresponding stETH amount.
     * The stETH amount is calculated twice: before and after the burning incurred rebase.
     *
     * @param account holder of the burnt shares
     * @param preRebaseTokenAmount amount of stETH the burnt shares corresponded to before the burn
     * @param postRebaseTokenAmount amount of stETH the burnt shares corresponded to after the burn
     * @param sharesAmount amount of burnt shares
     */
    event SharesBurnt(
        address indexed account,
        uint256 preRebaseTokenAmount,
        uint256 postRebaseTokenAmount,
        uint256 sharesAmount
    );
    /**
     * @return the name of the token.
     */
    function name() external pure returns (string) {
        return "Liquid staked Ether 2.0";
    }
    /**
     * @return the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external pure returns (string) {
        return "stETH";
    }
    /**
     * @return the number of decimals for getting user representation of a token amount.
     */
    function decimals() external pure returns (uint8) {
        return 18;
    }
    /**
     * @return the amount of tokens in existence.
     *
     * @dev Always equals to `_getTotalPooledEther()` since token amount
     * is pegged to the total amount of Ether controlled by the protocol.
     */
    function totalSupply() external view returns (uint256) {
        return _getTotalPooledEther();
    }
    /**
     * @return the entire amount of Ether controlled by the protocol.
     *
     * @dev The sum of all ETH balances in the protocol, equals to the total supply of stETH.
     */
    function getTotalPooledEther() external view returns (uint256) {
        return _getTotalPooledEther();
    }
    /**
     * @return the amount of tokens owned by the `_account`.
     *
     * @dev Balances are dynamic and equal the `_account`'s share in the amount of the
     * total Ether controlled by the protocol. See `sharesOf`.
     */
    function balanceOf(address _account) external view returns (uint256) {
        return getPooledEthByShares(_sharesOf(_account));
    }
    /**
     * @notice Moves `_amount` tokens from the caller's account to the `_recipient` account.
     *
     * @return a boolean value indicating whether the operation succeeded.
     * Emits a `Transfer` event.
     * Emits a `TransferShares` event.
     *
     * Requirements:
     *
     * - `_recipient` cannot be the zero address.
     * - the caller must have a balance of at least `_amount`.
     * - the contract must not be paused.
     *
     * @dev The `_amount` argument is the amount of tokens, not shares.
     */
    function transfer(address _recipient, uint256 _amount) external returns (bool) {
        _transfer(msg.sender, _recipient, _amount);
        return true;
    }
    /**
     * @return the remaining number of tokens that `_spender` is allowed to spend
     * on behalf of `_owner` through `transferFrom`. This is zero by default.
     *
     * @dev This value changes when `approve` or `transferFrom` is called.
     */
    function allowance(address _owner, address _spender) external view returns (uint256) {
        return allowances[_owner][_spender];
    }
    /**
     * @notice Sets `_amount` as the allowance of `_spender` over the caller's tokens.
     *
     * @return a boolean value indicating whether the operation succeeded.
     * Emits an `Approval` event.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     *
     * @dev The `_amount` argument is the amount of tokens, not shares.
     */
    function approve(address _spender, uint256 _amount) external returns (bool) {
        _approve(msg.sender, _spender, _amount);
        return true;
    }
    /**
     * @notice Moves `_amount` tokens from `_sender` to `_recipient` using the
     * allowance mechanism. `_amount` is then deducted from the caller's
     * allowance.
     *
     * @return a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     * Emits a `TransferShares` event.
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_sender` and `_recipient` cannot be the zero addresses.
     * - `_sender` must have a balance of at least `_amount`.
     * - the caller must have allowance for `_sender`'s tokens of at least `_amount`.
     * - the contract must not be paused.
     *
     * @dev The `_amount` argument is the amount of tokens, not shares.
     */
    function transferFrom(address _sender, address _recipient, uint256 _amount) external returns (bool) {
        _spendAllowance(_sender, msg.sender, _amount);
        _transfer(_sender, _recipient, _amount);
        return true;
    }
    /**
     * @notice Atomically increases the allowance granted to `_spender` by the caller by `_addedValue`.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in:
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/b709eae01d1da91902d06ace340df6b324e6f049/contracts/token/ERC20/IERC20.sol#L57
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_spender` cannot be the the zero address.
     */
    function increaseAllowance(address _spender, uint256 _addedValue) external returns (bool) {
        _approve(msg.sender, _spender, allowances[msg.sender][_spender].add(_addedValue));
        return true;
    }
    /**
     * @notice Atomically decreases the allowance granted to `_spender` by the caller by `_subtractedValue`.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in:
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/b709eae01d1da91902d06ace340df6b324e6f049/contracts/token/ERC20/IERC20.sol#L57
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     * - `_spender` must have allowance for the caller of at least `_subtractedValue`.
     */
    function decreaseAllowance(address _spender, uint256 _subtractedValue) external returns (bool) {
        uint256 currentAllowance = allowances[msg.sender][_spender];
        require(currentAllowance >= _subtractedValue, "ALLOWANCE_BELOW_ZERO");
        _approve(msg.sender, _spender, currentAllowance.sub(_subtractedValue));
        return true;
    }
    /**
     * @return the total amount of shares in existence.
     *
     * @dev The sum of all accounts' shares can be an arbitrary number, therefore
     * it is necessary to store it in order to calculate each account's relative share.
     */
    function getTotalShares() external view returns (uint256) {
        return _getTotalShares();
    }
    /**
     * @return the amount of shares owned by `_account`.
     */
    function sharesOf(address _account) external view returns (uint256) {
        return _sharesOf(_account);
    }
    /**
     * @return the amount of shares that corresponds to `_ethAmount` protocol-controlled Ether.
     */
    function getSharesByPooledEth(uint256 _ethAmount) public view returns (uint256) {
        return _ethAmount
            .mul(_getTotalShares())
            .div(_getTotalPooledEther());
    }
    /**
     * @return the amount of Ether that corresponds to `_sharesAmount` token shares.
     */
    function getPooledEthByShares(uint256 _sharesAmount) public view returns (uint256) {
        return _sharesAmount
            .mul(_getTotalPooledEther())
            .div(_getTotalShares());
    }
    /**
     * @notice Moves `_sharesAmount` token shares from the caller's account to the `_recipient` account.
     *
     * @return amount of transferred tokens.
     * Emits a `TransferShares` event.
     * Emits a `Transfer` event.
     *
     * Requirements:
     *
     * - `_recipient` cannot be the zero address.
     * - the caller must have at least `_sharesAmount` shares.
     * - the contract must not be paused.
     *
     * @dev The `_sharesAmount` argument is the amount of shares, not tokens.
     */
    function transferShares(address _recipient, uint256 _sharesAmount) external returns (uint256) {
        _transferShares(msg.sender, _recipient, _sharesAmount);
        uint256 tokensAmount = getPooledEthByShares(_sharesAmount);
        _emitTransferEvents(msg.sender, _recipient, tokensAmount, _sharesAmount);
        return tokensAmount;
    }
    /**
     * @notice Moves `_sharesAmount` token shares from the `_sender` account to the `_recipient` account.
     *
     * @return amount of transferred tokens.
     * Emits a `TransferShares` event.
     * Emits a `Transfer` event.
     *
     * Requirements:
     *
     * - `_sender` and `_recipient` cannot be the zero addresses.
     * - `_sender` must have at least `_sharesAmount` shares.
     * - the caller must have allowance for `_sender`'s tokens of at least `getPooledEthByShares(_sharesAmount)`.
     * - the contract must not be paused.
     *
     * @dev The `_sharesAmount` argument is the amount of shares, not tokens.
     */
    function transferSharesFrom(
        address _sender, address _recipient, uint256 _sharesAmount
    ) external returns (uint256) {
        uint256 tokensAmount = getPooledEthByShares(_sharesAmount);
        _spendAllowance(_sender, msg.sender, tokensAmount);
        _transferShares(_sender, _recipient, _sharesAmount);
        _emitTransferEvents(_sender, _recipient, tokensAmount, _sharesAmount);
        return tokensAmount;
    }
    /**
     * @return the total amount (in wei) of Ether controlled by the protocol.
     * @dev This is used for calculating tokens from shares and vice versa.
     * @dev This function is required to be implemented in a derived contract.
     */
    function _getTotalPooledEther() internal view returns (uint256);
    /**
     * @notice Moves `_amount` tokens from `_sender` to `_recipient`.
     * Emits a `Transfer` event.
     * Emits a `TransferShares` event.
     */
    function _transfer(address _sender, address _recipient, uint256 _amount) internal {
        uint256 _sharesToTransfer = getSharesByPooledEth(_amount);
        _transferShares(_sender, _recipient, _sharesToTransfer);
        _emitTransferEvents(_sender, _recipient, _amount, _sharesToTransfer);
    }
    /**
     * @notice Sets `_amount` as the allowance of `_spender` over the `_owner` s tokens.
     *
     * Emits an `Approval` event.
     *
     * NB: the method can be invoked even if the protocol paused.
     *
     * Requirements:
     *
     * - `_owner` cannot be the zero address.
     * - `_spender` cannot be the zero address.
     */
    function _approve(address _owner, address _spender, uint256 _amount) internal {
        require(_owner != address(0), "APPROVE_FROM_ZERO_ADDR");
        require(_spender != address(0), "APPROVE_TO_ZERO_ADDR");
        allowances[_owner][_spender] = _amount;
        emit Approval(_owner, _spender, _amount);
    }
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address _owner, address _spender, uint256 _amount) internal {
        uint256 currentAllowance = allowances[_owner][_spender];
        if (currentAllowance != INFINITE_ALLOWANCE) {
            require(currentAllowance >= _amount, "ALLOWANCE_EXCEEDED");
            _approve(_owner, _spender, currentAllowance - _amount);
        }
    }
    /**
     * @return the total amount of shares in existence.
     */
    function _getTotalShares() internal view returns (uint256) {
        return TOTAL_SHARES_POSITION.getStorageUint256();
    }
    /**
     * @return the amount of shares owned by `_account`.
     */
    function _sharesOf(address _account) internal view returns (uint256) {
        return shares[_account];
    }
    /**
     * @notice Moves `_sharesAmount` shares from `_sender` to `_recipient`.
     *
     * Requirements:
     *
     * - `_sender` cannot be the zero address.
     * - `_recipient` cannot be the zero address or the `stETH` token contract itself
     * - `_sender` must hold at least `_sharesAmount` shares.
     * - the contract must not be paused.
     */
    function _transferShares(address _sender, address _recipient, uint256 _sharesAmount) internal {
        require(_sender != address(0), "TRANSFER_FROM_ZERO_ADDR");
        require(_recipient != address(0), "TRANSFER_TO_ZERO_ADDR");
        require(_recipient != address(this), "TRANSFER_TO_STETH_CONTRACT");
        _whenNotStopped();
        uint256 currentSenderShares = shares[_sender];
        require(_sharesAmount <= currentSenderShares, "BALANCE_EXCEEDED");
        shares[_sender] = currentSenderShares.sub(_sharesAmount);
        shares[_recipient] = shares[_recipient].add(_sharesAmount);
    }
    /**
     * @notice Creates `_sharesAmount` shares and assigns them to `_recipient`, increasing the total amount of shares.
     * @dev This doesn't increase the token total supply.
     *
     * NB: The method doesn't check protocol pause relying on the external enforcement.
     *
     * Requirements:
     *
     * - `_recipient` cannot be the zero address.
     * - the contract must not be paused.
     */
    function _mintShares(address _recipient, uint256 _sharesAmount) internal returns (uint256 newTotalShares) {
        require(_recipient != address(0), "MINT_TO_ZERO_ADDR");
        newTotalShares = _getTotalShares().add(_sharesAmount);
        TOTAL_SHARES_POSITION.setStorageUint256(newTotalShares);
        shares[_recipient] = shares[_recipient].add(_sharesAmount);
        // Notice: we're not emitting a Transfer event from the zero address here since shares mint
        // works by taking the amount of tokens corresponding to the minted shares from all other
        // token holders, proportionally to their share. The total supply of the token doesn't change
        // as the result. This is equivalent to performing a send from each other token holder's
        // address to `address`, but we cannot reflect this as it would require sending an unbounded
        // number of events.
    }
    /**
     * @notice Destroys `_sharesAmount` shares from `_account`'s holdings, decreasing the total amount of shares.
     * @dev This doesn't decrease the token total supply.
     *
     * Requirements:
     *
     * - `_account` cannot be the zero address.
     * - `_account` must hold at least `_sharesAmount` shares.
     * - the contract must not be paused.
     */
    function _burnShares(address _account, uint256 _sharesAmount) internal returns (uint256 newTotalShares) {
        require(_account != address(0), "BURN_FROM_ZERO_ADDR");
        uint256 accountShares = shares[_account];
        require(_sharesAmount <= accountShares, "BALANCE_EXCEEDED");
        uint256 preRebaseTokenAmount = getPooledEthByShares(_sharesAmount);
        newTotalShares = _getTotalShares().sub(_sharesAmount);
        TOTAL_SHARES_POSITION.setStorageUint256(newTotalShares);
        shares[_account] = accountShares.sub(_sharesAmount);
        uint256 postRebaseTokenAmount = getPooledEthByShares(_sharesAmount);
        emit SharesBurnt(_account, preRebaseTokenAmount, postRebaseTokenAmount, _sharesAmount);
        // Notice: we're not emitting a Transfer event to the zero address here since shares burn
        // works by redistributing the amount of tokens corresponding to the burned shares between
        // all other token holders. The total supply of the token doesn't change as the result.
        // This is equivalent to performing a send from `address` to each other token holder address,
        // but we cannot reflect this as it would require sending an unbounded number of events.
        // We're emitting `SharesBurnt` event to provide an explicit rebase log record nonetheless.
    }
    /**
     * @dev Emits {Transfer} and {TransferShares} events
     */
    function _emitTransferEvents(address _from, address _to, uint _tokenAmount, uint256 _sharesAmount) internal {
        emit Transfer(_from, _to, _tokenAmount);
        emit TransferShares(_from, _to, _sharesAmount);
    }
    /**
     * @dev Emits {Transfer} and {TransferShares} events where `from` is 0 address. Indicates mint events.
     */
    function _emitTransferAfterMintingShares(address _to, uint256 _sharesAmount) internal {
        _emitTransferEvents(address(0), _to, getPooledEthByShares(_sharesAmount), _sharesAmount);
    }
    /**
     * @dev Mints shares to INITIAL_TOKEN_HOLDER
     */
    function _mintInitialShares(uint256 _sharesAmount) internal {
        _mintShares(INITIAL_TOKEN_HOLDER, _sharesAmount);
        _emitTransferAfterMintingShares(INITIAL_TOKEN_HOLDER, _sharesAmount);
    }
}
// SPDX-FileCopyrightText: 2023 OpenZeppelin, Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import {UnstructuredStorage} from "@aragon/os/contracts/common/UnstructuredStorage.sol";
import {SignatureUtils} from "../common/lib/SignatureUtils.sol";
import {IEIP712StETH} from "../common/interfaces/IEIP712StETH.sol";
import {StETH} from "./StETH.sol";
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC2612 {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     */
    function permit(
        address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
contract StETHPermit is IERC2612, StETH {
    using UnstructuredStorage for bytes32;
    /**
     * @dev Service event for initialization
     */
    event EIP712StETHInitialized(address eip712StETH);
    /**
     * @dev Nonces for ERC-2612 (Permit)
     */
    mapping(address => uint256) internal noncesByAddress;
    /**
     * @dev Storage position used for the EIP712 message utils contract
     *
     * keccak256("lido.StETHPermit.eip712StETH")
     */
    bytes32 internal constant EIP712_STETH_POSITION =
        0x42b2d95e1ce15ce63bf9a8d9f6312cf44b23415c977ffa3b884333422af8941c;
    /**
     * @dev Typehash constant for ERC-2612 (Permit)
     *
     * keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
     */
    bytes32 internal constant PERMIT_TYPEHASH =
        0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     */
    function permit(
        address _owner, address _spender, uint256 _value, uint256 _deadline, uint8 _v, bytes32 _r, bytes32 _s
    ) external {
        require(block.timestamp <= _deadline, "DEADLINE_EXPIRED");
        bytes32 structHash = keccak256(
            abi.encode(PERMIT_TYPEHASH, _owner, _spender, _value, _useNonce(_owner), _deadline)
        );
        bytes32 hash = IEIP712StETH(getEIP712StETH()).hashTypedDataV4(address(this), structHash);
        require(SignatureUtils.isValidSignature(_owner, hash, _v, _r, _s), "INVALID_SIGNATURE");
        _approve(_owner, _spender, _value);
    }
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256) {
        return noncesByAddress[owner];
    }
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return IEIP712StETH(getEIP712StETH()).domainSeparatorV4(address(this));
    }
    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     *
     * NB: compairing to the full-fledged ERC-5267 version:
     * - `salt` and `extensions` are unused
     * - `flags` is hex"0f" or 01111b
     *
     * @dev using shortened returns to reduce a bytecode size
     */
    function eip712Domain() external view returns (
        string memory name,
        string memory version,
        uint256 chainId,
        address verifyingContract
    ) {
        return IEIP712StETH(getEIP712StETH()).eip712Domain(address(this));
    }
    /**
     * @dev "Consume a nonce": return the current value and increment.
     */
    function _useNonce(address _owner) internal returns (uint256 current) {
        current = noncesByAddress[_owner];
        noncesByAddress[_owner] = current.add(1);
    }
    /**
     * @dev Initialize EIP712 message utils contract for stETH
     */
    function _initializeEIP712StETH(address _eip712StETH) internal {
        require(_eip712StETH != address(0), "ZERO_EIP712STETH");
        require(getEIP712StETH() == address(0), "EIP712STETH_ALREADY_SET");
        EIP712_STETH_POSITION.setStorageAddress(_eip712StETH);
        emit EIP712StETHInitialized(_eip712StETH);
    }
    /**
     * @dev Get EIP712 message utils contract
     */
    function getEIP712StETH() public view returns (address) {
        return EIP712_STETH_POSITION.getStorageAddress();
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.4.24;
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
contract Pausable {
    using UnstructuredStorage for bytes32;
    event Stopped();
    event Resumed();
    // keccak256("lido.Pausable.activeFlag")
    bytes32 internal constant ACTIVE_FLAG_POSITION =
        0x644132c4ddd5bb6f0655d5fe2870dcec7870e6be4758890f366b83441f9fdece;
    function _whenNotStopped() internal view {
        require(ACTIVE_FLAG_POSITION.getStorageBool(), "CONTRACT_IS_STOPPED");
    }
    function _whenStopped() internal view {
        require(!ACTIVE_FLAG_POSITION.getStorageBool(), "CONTRACT_IS_ACTIVE");
    }
    function isStopped() public view returns (bool) {
        return !ACTIVE_FLAG_POSITION.getStorageBool();
    }
    function _stop() internal {
        _whenNotStopped();
        ACTIVE_FLAG_POSITION.setStorageBool(false);
        emit Stopped();
    }
    function _resume() internal {
        _whenStopped();
        ACTIVE_FLAG_POSITION.setStorageBool(true);
        emit Resumed();
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.4.24;
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
/**
 * @title Adapted code of /contracts/0.8.9/utils/Versioned.sol
 *
 * This contract contains only core part of original Versioned.sol
 * to reduce contract size
 */
contract Versioned {
    using UnstructuredStorage for bytes32;
    event ContractVersionSet(uint256 version);
    /// @dev Storage slot: uint256 version
    /// Version of the initialized contract storage.
    /// The version stored in CONTRACT_VERSION_POSITION equals to:
    /// - 0 right after the deployment, before an initializer is invoked (and only at that moment);
    /// - N after calling initialize(), where N is the initially deployed contract version;
    /// - N after upgrading contract by calling finalizeUpgrade_vN().
    bytes32 internal constant CONTRACT_VERSION_POSITION =
        0x4dd0f6662ba1d6b081f08b350f5e9a6a7b15cf586926ba66f753594928fa64a6; // keccak256("lido.Versioned.contractVersion");
    uint256 internal constant PETRIFIED_VERSION_MARK = uint256(-1);
    constructor() public {
        // lock version in the implementation's storage to prevent initialization
        CONTRACT_VERSION_POSITION.setStorageUint256(PETRIFIED_VERSION_MARK);
    }
    /// @notice Returns the current contract version.
    function getContractVersion() public view returns (uint256) {
        return CONTRACT_VERSION_POSITION.getStorageUint256();
    }
    function _checkContractVersion(uint256 version) internal view {
        require(version == getContractVersion(), "UNEXPECTED_CONTRACT_VERSION");
    }
    function _setContractVersion(uint256 version) internal {
        CONTRACT_VERSION_POSITION.setStorageUint256(version);
        emit ContractVersionSet(version);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
interface IBurner {
    /**
     * Commit cover/non-cover burning requests and logs cover/non-cover shares amount just burnt.
     *
     * NB: The real burn enactment to be invoked after the call (via internal Lido._burnShares())
     */
    function commitSharesToBurn(uint256 _stETHSharesToBurn) external;
    /**
     * Request burn shares
     */
    function requestBurnShares(address _from, uint256 _sharesAmount) external;
    /**
      * Returns the current amount of shares locked on the contract to be burnt.
      */
    function getSharesRequestedToBurn() external view returns (uint256 coverShares, uint256 nonCoverShares);
    /**
      * Returns the total cover shares ever burnt.
      */
    function getCoverSharesBurnt() external view returns (uint256);
    /**
      * Returns the total non-cover shares ever burnt.
      */
    function getNonCoverSharesBurnt() external view returns (uint256);
}
// SPDX-FileCopyrightText: 2023 OpenZeppelin, Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
/**
 * @dev Helper interface of EIP712 StETH-dedicated helper.
 *
 * Has an access to the CHAIN_ID opcode and relies on immutables internally
 * Both are unavailable for Solidity 0.4.24.
 */
interface IEIP712StETH {
    /**
     * @dev Returns the domain separator for the current chain.
     */
    function domainSeparatorV4(address _stETH) external view returns (bytes32);
    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function hashTypedDataV4(address _stETH, bytes32 _structHash) external view returns (bytes32);
    /**
     * @dev returns the fields and values that describe the domain separator
     * used by stETH for EIP-712 signature.
     */
    function eip712Domain(address _stETH) external view returns (
        string memory name,
        string memory version,
        uint256 chainId,
        address verifyingContract
    );
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: GPL-3.0
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
interface ILidoLocator {
    function accountingOracle() external view returns(address);
    function depositSecurityModule() external view returns(address);
    function elRewardsVault() external view returns(address);
    function legacyOracle() external view returns(address);
    function lido() external view returns(address);
    function oracleReportSanityChecker() external view returns(address);
    function burner() external view returns(address);
    function stakingRouter() external view returns(address);
    function treasury() external view returns(address);
    function validatorsExitBusOracle() external view returns(address);
    function withdrawalQueue() external view returns(address);
    function withdrawalVault() external view returns(address);
    function postTokenRebaseReceiver() external view returns(address);
    function oracleDaemonConfig() external view returns(address);
    function coreComponents() external view returns(
        address elRewardsVault,
        address oracleReportSanityChecker,
        address stakingRouter,
        address treasury,
        address withdrawalQueue,
        address withdrawalVault
    );
    function oracleReportComponentsForLido() external view returns(
        address accountingOracle,
        address elRewardsVault,
        address oracleReportSanityChecker,
        address burner,
        address withdrawalQueue,
        address withdrawalVault,
        address postTokenRebaseReceiver
    );
}
// SPDX-License-Identifier: MIT
// Extracted from:
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/cryptography/ECDSA.sol#L53
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/541e821/contracts/utils/cryptography/ECDSA.sol#L112
/* See contracts/COMPILERS.md */
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
library ECDSA {
    /**
     * @dev Returns the address that signed a hashed message (`hash`).
     * This address can then be used for verification purposes.
     * Receives the `v`, `r` and `s` signature fields separately.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address)
    {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        require(signer != address(0), "ECDSA: invalid signature");
        return signer;
    }
    /**
     * @dev Overload of `recover` that receives the `r` and `vs` short-signature fields separately.
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        bytes32 s;
        uint8 v;
        assembly {
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return recover(hash, v, r, s);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: MIT
// Copied from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0457042d93d9dfd760dbaa06a4d2f1216fdbe297/contracts/utils/math/Math.sol
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
library Math256 {
    /// @dev Returns the largest of two numbers.
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /// @dev Returns the smallest of two numbers.
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /// @dev Returns the largest of two numbers.
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }
    /// @dev Returns the smallest of two numbers.
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }
    /// @dev Returns the ceiling of the division of two numbers.
    ///
    /// This differs from standard division with `/` in that it rounds up instead
    /// of rounding down.
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /// @dev Returns absolute difference of two numbers.
    function absDiff(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a - b : b - a;
    }
}
// SPDX-FileCopyrightText: 2023 Lido <[email protected]>
// SPDX-License-Identifier: MIT
/* See contracts/COMPILERS.md */
// solhint-disable-next-line lido/fixed-compiler-version
pragma solidity >=0.4.24 <0.9.0;
import {ECDSA} from "./ECDSA.sol";
library SignatureUtils {
    /**
     * @dev The selector of the ERC1271's `isValidSignature(bytes32 hash, bytes signature)` function,
     * serving at the same time as the magic value that the function should return upon success.
     *
     * See https://eips.ethereum.org/EIPS/eip-1271.
     *
     * bytes4(keccak256("isValidSignature(bytes32,bytes)")
     */
    bytes4 internal constant ERC1271_IS_VALID_SIGNATURE_SELECTOR = 0x1626ba7e;
    /**
     * @dev Checks signature validity.
     *
     * If the signer address doesn't contain any code, assumes that the address is externally owned
     * and the signature is a ECDSA signature generated using its private key. Otherwise, issues a
     * static call to the signer address to check the signature validity using the ERC-1271 standard.
     */
    function isValidSignature(
        address signer,
        bytes32 msgHash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (bool) {
        if (_hasCode(signer)) {
            bytes memory sig = abi.encodePacked(r, s, v);
            // Solidity <0.5 generates a regular CALL instruction even if the function being called
            // is marked as `view`, and the only way to perform a STATICCALL is to use assembly
            bytes memory data = abi.encodeWithSelector(ERC1271_IS_VALID_SIGNATURE_SELECTOR, msgHash, sig);
            bytes32 retval;
            /// @solidity memory-safe-assembly
            assembly {
                // allocate memory for storing the return value
                let outDataOffset := mload(0x40)
                mstore(0x40, add(outDataOffset, 32))
                // issue a static call and load the result if the call succeeded
                let success := staticcall(gas(), signer, add(data, 32), mload(data), outDataOffset, 32)
                if and(eq(success, 1), eq(returndatasize(), 32)) {
                    retval := mload(outDataOffset)
                }
            }
            return retval == bytes32(ERC1271_IS_VALID_SIGNATURE_SELECTOR);
        } else {
            return ECDSA.recover(msgHash, v, r, s) == signer;
        }
    }
    function _hasCode(address addr) internal view returns (bool) {
        uint256 size;
        /// @solidity memory-safe-assembly
        assembly { size := extcodesize(addr) }
        return size > 0;
    }
}
pragma solidity ^0.4.24;
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
interface IERC20 {
  function totalSupply() external view returns (uint256);
  function balanceOf(address who) external view returns (uint256);
  function allowance(address owner, address spender)
    external view returns (uint256);
  function transfer(address to, uint256 value) external returns (bool);
  function approve(address spender, uint256 value)
    external returns (bool);
  function transferFrom(address from, address to, uint256 value)
    external returns (bool);
  event Transfer(
    address indexed from,
    address indexed to,
    uint256 value
  );
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {TransferHelper} from "@uniswap/v3-periphery/contracts/libraries/TransferHelper.sol";
contract AssetsVault {
    address public stoneVault;
    address public strategyController;
    modifier onlyPermit() {
        require(
            stoneVault == msg.sender || strategyController == msg.sender,
            "not permit"
        );
        _;
    }
    constructor(address _stoneVault, address _strategyController) {
        require(
            _stoneVault != address(0) && _strategyController != address(0),
            "ZERO ADDRESS"
        );
        stoneVault = _stoneVault;
        strategyController = _strategyController;
    }
    function deposit() external payable {
        require(msg.value != 0, "too small");
    }
    function withdraw(address _to, uint256 _amount) external onlyPermit {
        TransferHelper.safeTransferETH(_to, _amount);
    }
    function setNewVault(address _vault) external onlyPermit {
        stoneVault = _vault;
    }
    function getBalance() external view returns (uint256 amount) {
        amount = address(this).balance;
    }
    receive() external payable {}
}// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
library TransferHelper {
    /// @notice Transfers tokens from the targeted address to the given destination
    /// @notice Errors with 'STF' if transfer fails
    /// @param token The contract address of the token to be transferred
    /// @param from The originating address from which the tokens will be transferred
    /// @param to The destination address of the transfer
    /// @param value The amount to be transferred
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) =
            token.call(abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'STF');
    }
    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Errors with ST if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'ST');
    }
    /// @notice Approves the stipulated contract to spend the given allowance in the given token
    /// @dev Errors with 'SA' if transfer fails
    /// @param token The contract address of the token to be approved
    /// @param to The target of the approval
    /// @param value The amount of the given token the target will be allowed to spend
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'SA');
    }
    /// @notice Transfers ETH to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'STE');
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
import {Stone} from "./Stone.sol";
import {StoneVault} from "../StoneVault.sol";
contract Minter {
    address public stone;
    address payable public vault;
    modifier onlyVault() {
        require(msg.sender == vault, "not vault");
        _;
    }
    constructor(address _stone, address payable _vault) {
        stone = _stone;
        vault = _vault;
    }
    function mint(address _to, uint256 _amount) external onlyVault {
        Stone(stone).mint(_to, _amount);
    }
    function burn(address _from, uint256 _amount) external onlyVault {
        Stone(stone).burn(_from, _amount);
    }
    function setNewVault(address _vault) external onlyVault {
        vault = payable(_vault);
    }
    function getTokenPrice() public returns (uint256 price) {
        price = StoneVault(vault).currentSharePrice();
    }
}// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface StoneVault {
    function currentSharePrice() external returns (uint256 price);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;
interface Stone {
    function mint(address _to, uint256 _amount) external;
    function burn(address _from, uint256 _amount) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;
import "./interfaces/ILayerZeroReceiver.sol";
import "./interfaces/ILayerZeroEndpoint.sol";
import "./interfaces/ILayerZeroMessagingLibrary.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract Endpoint is Ownable, ILayerZeroEndpoint {
    uint16 public immutable chainId;
    // installed libraries and reserved versions
    uint16 public constant BLOCK_VERSION = 65535;
    uint16 public constant DEFAULT_VERSION = 0;
    uint16 public latestVersion;
    mapping(uint16 => ILayerZeroMessagingLibrary) public libraryLookup; // version -> ILayerZeroEndpointLibrary
    // default send/receive libraries
    uint16 public defaultSendVersion;
    uint16 public defaultReceiveVersion;
    ILayerZeroMessagingLibrary public defaultSendLibrary;
    address public defaultReceiveLibraryAddress;
    struct LibraryConfig {
        uint16 sendVersion;
        uint16 receiveVersion;
        address receiveLibraryAddress;
        ILayerZeroMessagingLibrary sendLibrary;
    }
    struct StoredPayload {
        uint64 payloadLength;
        address dstAddress;
        bytes32 payloadHash;
    }
    // user app config = [uaAddress]
    mapping(address => LibraryConfig) public uaConfigLookup;
    // inboundNonce = [srcChainId][srcAddress].
    mapping(uint16 => mapping(bytes => uint64)) public inboundNonce;
    // outboundNonce = [dstChainId][srcAddress].
    mapping(uint16 => mapping(address => uint64)) public outboundNonce;
    // storedPayload = [srcChainId][srcAddress]
    mapping(uint16 => mapping(bytes => StoredPayload)) public storedPayload;
    // library versioning events
    event NewLibraryVersionAdded(uint16 version);
    event DefaultSendVersionSet(uint16 version);
    event DefaultReceiveVersionSet(uint16 version);
    event UaSendVersionSet(address ua, uint16 version);
    event UaReceiveVersionSet(address ua, uint16 version);
    event UaForceResumeReceive(uint16 chainId, bytes srcAddress);
    // payload events
    event PayloadCleared(uint16 srcChainId, bytes srcAddress, uint64 nonce, address dstAddress);
    event PayloadStored(uint16 srcChainId, bytes srcAddress, address dstAddress, uint64 nonce, bytes payload, bytes reason);
    constructor(uint16 _chainId) {
        chainId = _chainId;
    }
    //---------------------------------------------------------------------------
    // send and receive nonreentrant lock
    uint8 internal constant _NOT_ENTERED = 1;
    uint8 internal constant _ENTERED = 2;
    uint8 internal _send_entered_state = 1;
    uint8 internal _receive_entered_state = 1;
    modifier sendNonReentrant() {
        require(_send_entered_state == _NOT_ENTERED, "LayerZero: no send reentrancy");
        _send_entered_state = _ENTERED;
        _;
        _send_entered_state = _NOT_ENTERED;
    }
    modifier receiveNonReentrant() {
        require(_receive_entered_state == _NOT_ENTERED, "LayerZero: no receive reentrancy");
        _receive_entered_state = _ENTERED;
        _;
        _receive_entered_state = _NOT_ENTERED;
    }
    // BLOCK_VERSION is also a valid version
    modifier validVersion(uint16 _version) {
        require(_version <= latestVersion || _version == BLOCK_VERSION, "LayerZero: invalid messaging library version");
        _;
    }
    //---------------------------------------------------------------------------
    // User Application Calls - Endpoint Interface
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable override sendNonReentrant {
        LibraryConfig storage uaConfig = uaConfigLookup[msg.sender];
        uint64 nonce = ++outboundNonce[_dstChainId][msg.sender];
        _getSendLibrary(uaConfig).send{value: msg.value}(msg.sender, nonce, _dstChainId, _destination, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    //---------------------------------------------------------------------------
    // authenticated Library (msg.sender) Calls to pass through Endpoint to UA (dstAddress)
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external override receiveNonReentrant {
        // assert and increment the nonce. no message shuffling
        require(_nonce == ++inboundNonce[_srcChainId][_srcAddress], "LayerZero: wrong nonce");
        LibraryConfig storage uaConfig = uaConfigLookup[_dstAddress];
        // authentication to prevent cross-version message validation
        // protects against a malicious library from passing arbitrary data
        if (uaConfig.receiveVersion == DEFAULT_VERSION) {
            require(defaultReceiveLibraryAddress == msg.sender, "LayerZero: invalid default library");
        } else {
            require(uaConfig.receiveLibraryAddress == msg.sender, "LayerZero: invalid library");
        }
        // block if any message blocking
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        require(sp.payloadHash == bytes32(0), "LayerZero: in message blocking");
        try ILayerZeroReceiver(_dstAddress).lzReceive{gas: _gasLimit}(_srcChainId, _srcAddress, _nonce, _payload) {
            // success, do nothing, end of the message delivery
        } catch (bytes memory reason) {
            // revert nonce if any uncaught errors/exceptions if the ua chooses the blocking mode
            storedPayload[_srcChainId][_srcAddress] = StoredPayload(uint64(_payload.length), _dstAddress, keccak256(_payload));
            emit PayloadStored(_srcChainId, _srcAddress, _dstAddress, _nonce, _payload, reason);
        }
    }
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external override receiveNonReentrant {
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        require(sp.payloadHash != bytes32(0), "LayerZero: no stored payload");
        require(_payload.length == sp.payloadLength && keccak256(_payload) == sp.payloadHash, "LayerZero: invalid payload");
        address dstAddress = sp.dstAddress;
        // empty the storedPayload
        sp.payloadLength = 0;
        sp.dstAddress = address(0);
        sp.payloadHash = bytes32(0);
        uint64 nonce = inboundNonce[_srcChainId][_srcAddress];
        ILayerZeroReceiver(dstAddress).lzReceive(_srcChainId, _srcAddress, nonce, _payload);
        emit PayloadCleared(_srcChainId, _srcAddress, nonce, dstAddress);
    }
    //---------------------------------------------------------------------------
    // Owner Calls, only new library version upgrade (3 steps)
    // note libraryLookup[0] = 0x0, no library implementation
    // LIBRARY UPGRADE step 1: set _newLayerZeroLibraryAddress be the new version
    function newVersion(address _newLayerZeroLibraryAddress) external onlyOwner {
        require(_newLayerZeroLibraryAddress != address(0x0), "LayerZero: new version cannot be zero address");
        require(latestVersion < 65535, "LayerZero: can not add new messaging library");
        latestVersion++;
        libraryLookup[latestVersion] = ILayerZeroMessagingLibrary(_newLayerZeroLibraryAddress);
        emit NewLibraryVersionAdded(latestVersion);
    }
    // LIBRARY UPGRADE step 2: stop sending messages from the old version
    function setDefaultSendVersion(uint16 _newDefaultSendVersion) external onlyOwner validVersion(_newDefaultSendVersion) {
        require(_newDefaultSendVersion != DEFAULT_VERSION, "LayerZero: default send version must > 0");
        defaultSendVersion = _newDefaultSendVersion;
        defaultSendLibrary = libraryLookup[defaultSendVersion];
        emit DefaultSendVersionSet(_newDefaultSendVersion);
    }
    // LIBRARY UPGRADE step 3: stop receiving messages from the old version
    function setDefaultReceiveVersion(uint16 _newDefaultReceiveVersion) external onlyOwner validVersion(_newDefaultReceiveVersion) {
        require(_newDefaultReceiveVersion != DEFAULT_VERSION, "LayerZero: default receive version must > 0");
        defaultReceiveVersion = _newDefaultReceiveVersion;
        defaultReceiveLibraryAddress = address(libraryLookup[defaultReceiveVersion]);
        emit DefaultReceiveVersionSet(_newDefaultReceiveVersion);
    }
    //---------------------------------------------------------------------------
    // User Application Calls - UA set/get Interface
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override validVersion(_version) {
        if (_version == DEFAULT_VERSION) {
            require(defaultSendVersion == defaultReceiveVersion, "LayerZero: can not set Config during DEFAULT migration");
            _version = defaultSendVersion;
        }
        require(_version != BLOCK_VERSION, "LayerZero: can not set config for BLOCK_VERSION");
        libraryLookup[_version].setConfig(_chainId, msg.sender, _configType, _config);
    }
    // Migration step 1: set the send version
    // Define what library the UA points too
    function setSendVersion(uint16 _newVersion) external override validVersion(_newVersion) {
        // write into config
        LibraryConfig storage uaConfig = uaConfigLookup[msg.sender];
        uaConfig.sendVersion = _newVersion;
        // the libraryLookup[BLOCK_VERSION || DEFAULT_VERSION] = 0x0
        uaConfig.sendLibrary = libraryLookup[_newVersion];
        emit UaSendVersionSet(msg.sender, _newVersion);
    }
    // Migration step 2: set the receive version
    // after all messages sent from the old version are received
    // the UA can now safely switch to the new receive version
    // it is the UA's responsibility make sure all messages from the old version are processed
    function setReceiveVersion(uint16 _newVersion) external override validVersion(_newVersion) {
        // write into config
        LibraryConfig storage uaConfig = uaConfigLookup[msg.sender];
        uaConfig.receiveVersion = _newVersion;
        // the libraryLookup[BLOCK_VERSION || DEFAULT_VERSION] = 0x0
        uaConfig.receiveLibraryAddress = address(libraryLookup[_newVersion]);
        emit UaReceiveVersionSet(msg.sender, _newVersion);
    }
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override {
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        // revert if no messages are cached. safeguard malicious UA behaviour
        require(sp.payloadHash != bytes32(0), "LayerZero: no stored payload");
        require(sp.dstAddress == msg.sender, "LayerZero: invalid caller");
        // empty the storedPayload
        sp.payloadLength = 0;
        sp.dstAddress = address(0);
        sp.payloadHash = bytes32(0);
        // emit the event with the new nonce
        emit UaForceResumeReceive(_srcChainId, _srcAddress);
    }
    //---------------------------------------------------------------------------
    // view helper function
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParams) external view override returns (uint nativeFee, uint zroFee) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        ILayerZeroMessagingLibrary lib = uaConfig.sendVersion == DEFAULT_VERSION ? defaultSendLibrary : uaConfig.sendLibrary;
        return lib.estimateFees(_dstChainId, _userApplication, _payload, _payInZRO, _adapterParams);
    }
    function _getSendLibrary(LibraryConfig storage uaConfig) internal view returns (ILayerZeroMessagingLibrary) {
        if (uaConfig.sendVersion == DEFAULT_VERSION) {
            // check if the in send-blocking upgrade
            require(defaultSendVersion != BLOCK_VERSION, "LayerZero: default in BLOCK_VERSION");
            return defaultSendLibrary;
        } else {
            // check if the in send-blocking upgrade
            require(uaConfig.sendVersion != BLOCK_VERSION, "LayerZero: in BLOCK_VERSION");
            return uaConfig.sendLibrary;
        }
    }
    function getSendLibraryAddress(address _userApplication) external view override returns (address sendLibraryAddress) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        uint16 sendVersion = uaConfig.sendVersion;
        require(sendVersion != BLOCK_VERSION, "LayerZero: send version is BLOCK_VERSION");
        if (sendVersion == DEFAULT_VERSION) {
            require(defaultSendVersion != BLOCK_VERSION, "LayerZero: send version (default) is BLOCK_VERSION");
            sendLibraryAddress = address(defaultSendLibrary);
        } else {
            sendLibraryAddress = address(uaConfig.sendLibrary);
        }
    }
    function getReceiveLibraryAddress(address _userApplication) external view override returns (address receiveLibraryAddress) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        uint16 receiveVersion = uaConfig.receiveVersion;
        require(receiveVersion != BLOCK_VERSION, "LayerZero: receive version is BLOCK_VERSION");
        if (receiveVersion == DEFAULT_VERSION) {
            require(defaultReceiveVersion != BLOCK_VERSION, "LayerZero: receive version (default) is BLOCK_VERSION");
            receiveLibraryAddress = defaultReceiveLibraryAddress;
        } else {
            receiveLibraryAddress = uaConfig.receiveLibraryAddress;
        }
    }
    function isSendingPayload() external view override returns (bool) {
        return _send_entered_state == _ENTERED;
    }
    function isReceivingPayload() external view override returns (bool) {
        return _receive_entered_state == _ENTERED;
    }
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view override returns (uint64) {
        return inboundNonce[_srcChainId][_srcAddress];
    }
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view override returns (uint64) {
        return outboundNonce[_dstChainId][_srcAddress];
    }
    function getChainId() external view override returns (uint16) {
        return chainId;
    }
    function getSendVersion(address _userApplication) external view override returns (uint16) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        return uaConfig.sendVersion == DEFAULT_VERSION ? defaultSendVersion : uaConfig.sendVersion;
    }
    function getReceiveVersion(address _userApplication) external view override returns (uint16) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        return uaConfig.receiveVersion == DEFAULT_VERSION ? defaultReceiveVersion : uaConfig.receiveVersion;
    }
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view override validVersion(_version) returns (bytes memory) {
        if (_version == DEFAULT_VERSION) {
            require(defaultSendVersion == defaultReceiveVersion, "LayerZero: no DEFAULT config while migration");
            _version = defaultSendVersion;
        }
        require(_version != BLOCK_VERSION, "LayerZero: can not get config for BLOCK_VERSION");
        return libraryLookup[_version].getConfig(_chainId, _userApplication, _configType);
    }
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view override returns (bool) {
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        return sp.payloadHash != bytes32(0);
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.7.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroMessagingLibrary {
    // send(), messages will be inflight.
    function send(address _userApplication, uint64 _lastNonce, uint16 _chainId, bytes calldata _destination, bytes calldata _payload, address payable refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // estimate native fee at the send side
    function estimateFees(uint16 _chainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    //---------------------------------------------------------------------------
    // setConfig / getConfig are User Application (UA) functions to specify Oracle, Relayer, blockConfirmations, libraryVersion
    function setConfig(uint16 _chainId, address _userApplication, uint _configType, bytes calldata _config) external;
    function getConfig(uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;
import "./interfaces/ILayerZeroEndpoint.sol";
contract NonceContract {
    ILayerZeroEndpoint public immutable endpoint;
    // outboundNonce = [dstChainId][remoteAddress + localAddress]
    mapping(uint16 => mapping(bytes => uint64)) public outboundNonce;
    constructor(address _endpoint) {
        endpoint = ILayerZeroEndpoint(_endpoint);
    }
    function increment(uint16 _chainId, address _ua, bytes calldata _path) external returns (uint64) {
        require(endpoint.getSendLibraryAddress(_ua) == msg.sender, "NonceContract: msg.sender is not valid sendlibrary");
        return ++outboundNonce[_chainId][_path];
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }
    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallUUPS(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        // Upgrades from old implementations will perform a rollback test. This test requires the new
        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
        // this special case will break upgrade paths from old UUPS implementation to new ones.
        if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
            _setImplementation(newImplementation);
        } else {
            try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
                require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
            } catch {
                revert("ERC1967Upgrade: new implementation is not UUPS");
            }
            _upgradeToAndCall(newImplementation, data, forceCall);
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view virtual returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(Address.isContract(IBeacon(newBeacon).implementation()), "ERC1967: beacon implementation is not a contract");
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0-rc.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../openzeppelin/proxy/ERC1967/ERC1967Proxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract OptimizedTransparentUpgradeableProxy is ERC1967Proxy {
    address internal immutable _ADMIN;
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _ADMIN = admin_;
        // still store it to work with EIP-1967
        bytes32 slot = _ADMIN_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, admin_)
        }
        emit AdminChanged(address(0), admin_);
    }
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
    function _getAdmin() internal view virtual override returns (address) {
        return _ADMIN;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;
import "./interfaces/ILayerZeroTreasury.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "./interfaces/ILayerZeroUltraLightNodeV2.sol";
contract TreasuryV2 is ILayerZeroTreasury, Ownable {
    using SafeMath for uint;
    uint public nativeBP;
    uint public zroFee;
    bool public feeEnabled;
    bool public zroEnabled;
    ILayerZeroUltraLightNodeV2 public uln;
    event NativeBP(uint bp);
    event ZroFee(uint zroFee);
    event FeeEnabled(bool feeEnabled);
    event ZroEnabled(bool zroEnabled);
    constructor(address _ulnv2) {
        uln = ILayerZeroUltraLightNodeV2(_ulnv2);
    }
    function getFees(bool payInZro, uint relayerFee, uint oracleFee) external view override returns (uint) {
        if (feeEnabled) {
            if (payInZro) {
                require(zroEnabled, "LayerZero: ZRO is not enabled");
                return zroFee;
            } else {
                return relayerFee.add(oracleFee).mul(nativeBP).div(10000);
            }
        }
        return 0;
    }
    function setFeeEnabled(bool _feeEnabled) external onlyOwner {
        feeEnabled = _feeEnabled;
        emit FeeEnabled(_feeEnabled);
    }
    function setZroEnabled(bool _zroEnabled) external onlyOwner {
        zroEnabled = _zroEnabled;
        emit ZroEnabled(_zroEnabled);
    }
    function setNativeBP(uint _nativeBP) external onlyOwner {
        nativeBP = _nativeBP;
        emit NativeBP(_nativeBP);
    }
    function setZroFee(uint _zroFee) external onlyOwner {
        zroFee = _zroFee;
        emit ZroFee(_zroFee);
    }
    function withdrawZROFromULN(address _to, uint _amount) external onlyOwner {
        uln.withdrawZRO(_to, _amount);
    }
    function withdrawNativeFromULN(address payable _to, uint _amount) external onlyOwner {
        uln.withdrawNative(_to, _amount);
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroTreasury {
    function getFees(bool payInZro, uint relayerFee, uint oracleFee) external view returns (uint);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.7.0;
pragma abicoder v2;
interface ILayerZeroUltraLightNodeV2 {
    // Relayer functions
    function validateTransactionProof(uint16 _srcChainId, address _dstAddress, uint _gasLimit, bytes32 _lookupHash, bytes32 _blockData, bytes calldata _transactionProof) external;
    // an Oracle delivers the block data using updateHash()
    function updateHash(uint16 _srcChainId, bytes32 _lookupHash, uint _confirmations, bytes32 _blockData) external;
    // can only withdraw the receivable of the msg.sender
    function withdrawNative(address payable _to, uint _amount) external;
    function withdrawZRO(address _to, uint _amount) external;
    // view functions
    function getAppConfig(uint16 _remoteChainId, address _userApplicationAddress) external view returns (ApplicationConfiguration memory);
    function accruedNativeFee(address _address) external view returns (uint);
    struct ApplicationConfiguration {
        uint16 inboundProofLibraryVersion;
        uint64 inboundBlockConfirmations;
        address relayer;
        uint16 outboundProofType;
        uint64 outboundBlockConfirmations;
        address oracle;
    }
    event HashReceived(uint16 indexed srcChainId, address indexed oracle, bytes32 lookupHash, bytes32 blockData, uint confirmations);
    event RelayerParams(bytes adapterParams, uint16 outboundProofType);
    event Packet(bytes payload);
    event InvalidDst(uint16 indexed srcChainId, bytes srcAddress, address indexed dstAddress, uint64 nonce, bytes32 payloadHash);
    event PacketReceived(uint16 indexed srcChainId, bytes srcAddress, address indexed dstAddress, uint64 nonce, bytes32 payloadHash);
    event AppConfigUpdated(address indexed userApplication, uint indexed configType, bytes newConfig);
    event AddInboundProofLibraryForChain(uint16 indexed chainId, address lib);
    event EnableSupportedOutboundProof(uint16 indexed chainId, uint16 proofType);
    event SetChainAddressSize(uint16 indexed chainId, uint size);
    event SetDefaultConfigForChainId(uint16 indexed chainId, uint16 inboundProofLib, uint64 inboundBlockConfirm, address relayer, uint16 outboundProofType, uint64 outboundBlockConfirm, address oracle);
    event SetDefaultAdapterParamsForChainId(uint16 indexed chainId, uint16 indexed proofType, bytes adapterParams);
    event SetLayerZeroToken(address indexed tokenAddress);
    event SetRemoteUln(uint16 indexed chainId, bytes32 uln);
    event SetTreasury(address indexed treasuryAddress);
    event WithdrawZRO(address indexed msgSender, address indexed to, uint amount);
    event WithdrawNative(address indexed msgSender, address indexed to, uint amount);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}