// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.10;
import './TransferHelper.sol';
import './ERC20Interface.sol';
import './IForwarder.sol';
/** ERC721, ERC1155 imports */
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol';
/**
 *
 * WalletSimple
 * ============
 *
 * Basic multi-signer wallet designed for use in a co-signing environment where 2 signatures are required to move funds.
 * Typically used in a 2-of-3 signing configuration. Uses ecrecover to allow for 2 signatures in a single transaction.
 *
 * The first signature is created on the operation hash (see Data Formats) and passed to sendMultiSig/sendMultiSigToken
 * The signer is determined by verifyMultiSig().
 *
 * The second signature is created by the submitter of the transaction and determined by msg.signer.
 *
 * Data Formats
 * ============
 *
 * The signature is created with ethereumjs-util.ecsign(operationHash).
 * Like the eth_sign RPC call, it packs the values as a 65-byte array of [r, s, v].
 * Unlike eth_sign, the message is not prefixed.
 *
 * The operationHash the result of keccak256(prefix, toAddress, value, data, expireTime).
 * For ether transactions, `prefix` is "ETHER".
 * For token transaction, `prefix` is "ERC20" and `data` is the tokenContractAddress.
 *
 *
 */
contract WalletSimple is IERC721Receiver, ERC1155Receiver {
  // Events
  event Deposited(address from, uint256 value, bytes data);
  event SafeModeActivated(address msgSender);
  event Transacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation, // Operation hash (see Data Formats)
    address toAddress, // The address the transaction was sent to
    uint256 value, // Amount of Wei sent to the address
    bytes data // Data sent when invoking the transaction
  );
  event BatchTransfer(address sender, address recipient, uint256 value);
  // this event shows the other signer and the operation hash that they signed
  // specific batch transfer events are emitted in Batcher
  event BatchTransacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation // Operation hash (see Data Formats)
  );
  // Public fields
  mapping(address => bool) public signers; // The addresses that can co-sign transactions on the wallet
  bool public safeMode = false; // When active, wallet may only send to signer addresses
  bool public initialized = false; // True if the contract has been initialized
  // Internal fields
  uint256 private constant MAX_SEQUENCE_ID_INCREASE = 10000;
  uint256 constant SEQUENCE_ID_WINDOW_SIZE = 10;
  uint256[SEQUENCE_ID_WINDOW_SIZE] recentSequenceIds;
  /**
   * Set up a simple multi-sig wallet by specifying the signers allowed to be used on this wallet.
   * 2 signers will be required to send a transaction from this wallet.
   * Note: The sender is NOT automatically added to the list of signers.
   * Signers CANNOT be changed once they are set
   *
   * @param allowedSigners An array of signers on the wallet
   */
  function init(address[] calldata allowedSigners) external onlyUninitialized {
    require(allowedSigners.length == 3, 'Invalid number of signers');
    for (uint8 i = 0; i < allowedSigners.length; i++) {
      require(allowedSigners[i] != address(0), 'Invalid signer');
      signers[allowedSigners[i]] = true;
    }
    initialized = true;
  }
  /**
   * Get the network identifier that signers must sign over
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER';
  }
  /**
   * Get the network identifier that signers must sign over for token transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getTokenNetworkId() internal virtual pure returns (string memory) {
    return 'ERC20';
  }
  /**
   * Get the network identifier that signers must sign over for batch transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getBatchNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER-Batch';
  }
  /**
   * Determine if an address is a signer on this wallet
   * @param signer address to check
   * returns boolean indicating whether address is signer or not
   */
  function isSigner(address signer) public view returns (bool) {
    return signers[signer];
  }
  /**
   * Modifier that will execute internal code block only if the sender is an authorized signer on this wallet
   */
  modifier onlySigner {
    require(isSigner(msg.sender), 'Non-signer in onlySigner method');
    _;
  }
  /**
   * Modifier that will execute internal code block only if the contract has not been initialized yet
   */
  modifier onlyUninitialized {
    require(!initialized, 'Contract already initialized');
    _;
  }
  /**
   * Gets called when a transaction is received with data that does not match any other method
   */
  fallback() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      emit Deposited(msg.sender, msg.value, msg.data);
    }
  }
  /**
   * Gets called when a transaction is received with ether and no data
   */
  receive() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      // message data is always empty for receive. If there is data it is sent to fallback function.
      emit Deposited(msg.sender, msg.value, '');
    }
  }
  /**
   * Execute a multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in Wei to be sent
   * @param data the data to send to the toAddress when invoking the transaction
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSig(
    address toAddress,
    uint256 value,
    bytes calldata data,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getNetworkId(),
        toAddress,
        value,
        data,
        expireTime,
        sequenceId
      )
    );
    address otherSigner = verifyMultiSig(
      toAddress,
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    // Success, send the transaction
    (bool success, ) = toAddress.call{ value: value }(data);
    require(success, 'Call execution failed');
    emit Transacted(
      msg.sender,
      otherSigner,
      operationHash,
      toAddress,
      value,
      data
    );
  }
  /**
   * Execute a batched multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   * The recipients and values to send are encoded in two arrays, where for index i, recipients[i] will be sent values[i].
   *
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigBatch(
    address[] calldata recipients,
    uint256[] calldata values,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    require(recipients.length != 0, 'Not enough recipients');
    require(
      recipients.length == values.length,
      'Unequal recipients and values'
    );
    require(recipients.length < 256, 'Too many recipients, max 255');
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getBatchNetworkId(),
        recipients,
        values,
        expireTime,
        sequenceId
      )
    );
    // the first parameter (toAddress) is used to ensure transactions in safe mode only go to a signer
    // if in safe mode, we should use normal sendMultiSig to recover, so this check will always fail if in safe mode
    require(!safeMode, 'Batch in safe mode');
    address otherSigner = verifyMultiSig(
      address(0x0),
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    batchTransfer(recipients, values);
    emit BatchTransacted(msg.sender, otherSigner, operationHash);
  }
  /**
   * Transfer funds in a batch to each of recipients
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to recipients.
   *  The recipient with index i in recipients array will be sent values[i].
   *  Thus, recipients and values must be the same length
   */
  function batchTransfer(
    address[] calldata recipients,
    uint256[] calldata values
  ) internal {
    for (uint256 i = 0; i < recipients.length; i++) {
      require(address(this).balance >= values[i], 'Insufficient funds');
      (bool success, ) = recipients[i].call{ value: values[i] }('');
      require(success, 'Call failed');
      emit BatchTransfer(msg.sender, recipients[i], values[i]);
    }
  }
  /**
   * Execute a multi-signature token transfer from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in tokens to be sent
   * @param tokenContractAddress the address of the erc20 token contract
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigToken(
    address toAddress,
    uint256 value,
    address tokenContractAddress,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getTokenNetworkId(),
        toAddress,
        value,
        tokenContractAddress,
        expireTime,
        sequenceId
      )
    );
    verifyMultiSig(toAddress, operationHash, signature, expireTime, sequenceId);
    TransferHelper.safeTransfer(tokenContractAddress, toAddress, value);
  }
  /**
   * Execute a token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushTokens(tokenContractAddress);
  }
  /**
   * Execute a ERC721 token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushERC721ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC721Token(tokenContractAddress, tokenId);
  }
  /**
   * Execute a ERC1155 batch token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   */
  function batchFlushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.batchFlushERC1155Tokens(tokenContractAddress, tokenIds);
  }
  /**
   * Execute a ERC1155 token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   * @param tokenId the token id associated with the ERC1155
   */
  function flushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC1155Tokens(tokenContractAddress, tokenId);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush721(autoFlush);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush1155(autoFlush);
  }
  /**
   * Do common multisig verification for both eth sends and erc20token transfers
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * returns address that has created the signature
   */
  function verifyMultiSig(
    address toAddress,
    bytes32 operationHash,
    bytes calldata signature,
    uint256 expireTime,
    uint256 sequenceId
  ) private returns (address) {
    address otherSigner = recoverAddressFromSignature(operationHash, signature);
    // Verify if we are in safe mode. In safe mode, the wallet can only send to signers
    require(!safeMode || isSigner(toAddress), 'External transfer in safe mode');
    // Verify that the transaction has not expired
    require(expireTime >= block.timestamp, 'Transaction expired');
    // Try to insert the sequence ID. Will revert if the sequence id was invalid
    tryInsertSequenceId(sequenceId);
    require(isSigner(otherSigner), 'Invalid signer');
    require(otherSigner != msg.sender, 'Signers cannot be equal');
    return otherSigner;
  }
  /**
   * ERC721 standard callback function for when a ERC721 is transfered.
   *
   * @param _operator The address of the nft contract
   * @param _from The address of the sender
   * @param _tokenId The token id of the nft
   * @param _data Additional data with no specified format, sent in call to `_to`
   */
  function onERC721Received(
    address _operator,
    address _from,
    uint256 _tokenId,
    bytes memory _data
  ) external virtual override returns (bytes4) {
    return this.onERC721Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155Received(
    address _operator,
    address _from,
    uint256 id,
    uint256 value,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155BatchReceived(
    address _operator,
    address _from,
    uint256[] calldata ids,
    uint256[] calldata values,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155BatchReceived.selector;
  }
  /**
   * Irrevocably puts contract into safe mode. When in this mode, transactions may only be sent to signing addresses.
   */
  function activateSafeMode() external onlySigner {
    safeMode = true;
    emit SafeModeActivated(msg.sender);
  }
  /**
   * Gets signer's address using ecrecover
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * returns address recovered from the signature
   */
  function recoverAddressFromSignature(
    bytes32 operationHash,
    bytes memory signature
  ) private pure returns (address) {
    require(signature.length == 65, 'Invalid signature - wrong length');
    // We need to unpack the signature, which is given as an array of 65 bytes (like eth.sign)
    bytes32 r;
    bytes32 s;
    uint8 v;
    // solhint-disable-next-line
    assembly {
      r := mload(add(signature, 32))
      s := mload(add(signature, 64))
      v := and(mload(add(signature, 65)), 255)
    }
    if (v < 27) {
      v += 27; // Ethereum versions are 27 or 28 as opposed to 0 or 1 which is submitted by some signing libs
    }
    // protect against signature malleability
    // S value must be in the lower half orader
    // reference: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/051d340171a93a3d401aaaea46b4b62fa81e5d7c/contracts/cryptography/ECDSA.sol#L53
    require(
      uint256(s) <=
        0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
      "ECDSA: invalid signature 's' value"
    );
    // note that this returns 0 if the signature is invalid
    // Since 0x0 can never be a signer, when the recovered signer address
    // is checked against our signer list, that 0x0 will cause an invalid signer failure
    return ecrecover(operationHash, v, r, s);
  }
  /**
   * Verify that the sequence id has not been used before and inserts it. Throws if the sequence ID was not accepted.
   * We collect a window of up to 10 recent sequence ids, and allow any sequence id that is not in the window and
   * greater than the minimum element in the window.
   * @param sequenceId to insert into array of stored ids
   */
  function tryInsertSequenceId(uint256 sequenceId) private onlySigner {
    // Keep a pointer to the lowest value element in the window
    uint256 lowestValueIndex = 0;
    // fetch recentSequenceIds into memory for function context to avoid unnecessary sloads
      uint256[SEQUENCE_ID_WINDOW_SIZE] memory _recentSequenceIds
     = recentSequenceIds;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      require(_recentSequenceIds[i] != sequenceId, 'Sequence ID already used');
      if (_recentSequenceIds[i] < _recentSequenceIds[lowestValueIndex]) {
        lowestValueIndex = i;
      }
    }
    // The sequence ID being used is lower than the lowest value in the window
    // so we cannot accept it as it may have been used before
    require(
      sequenceId > _recentSequenceIds[lowestValueIndex],
      'Sequence ID below window'
    );
    // Block sequence IDs which are much higher than the lowest value
    // This prevents people blocking the contract by using very large sequence IDs quickly
    require(
      sequenceId <=
        (_recentSequenceIds[lowestValueIndex] + MAX_SEQUENCE_ID_INCREASE),
      'Sequence ID above maximum'
    );
    recentSequenceIds[lowestValueIndex] = sequenceId;
  }
  /**
   * Gets the next available sequence ID for signing when using executeAndConfirm
   * returns the sequenceId one higher than the highest currently stored
   */
  function getNextSequenceId() external view returns (uint256) {
    uint256 highestSequenceId = 0;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      if (recentSequenceIds[i] > highestSequenceId) {
        highestSequenceId = recentSequenceIds[i];
      }
    }
    return highestSequenceId + 1;
  }
}
// SPDX-License-Identifier: GPL-3.0-or-later
// source: https://github.com/Uniswap/solidity-lib/blob/master/contracts/libraries/TransferHelper.sol
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/Address.sol';
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
  function safeTransfer(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transfer(address,uint256)')));
    (bool success, bytes memory data) = token.call(
      abi.encodeWithSelector(0xa9059cbb, to, value)
    );
    require(
      success && (data.length == 0 || abi.decode(data, (bool))),
      'TransferHelper::safeTransfer: transfer failed'
    );
  }
  function safeTransferFrom(
    address token,
    address from,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
    (bool success, bytes memory returndata) = token.call(
      abi.encodeWithSelector(0x23b872dd, from, to, value)
    );
    Address.verifyCallResult(
      success,
      returndata,
      'TransferHelper::transferFrom: transferFrom failed'
    );
  }
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.10;
/**
 * Contract that exposes the needed erc20 token functions
 */
abstract contract ERC20Interface {
  // Send _value amount of tokens to address _to
  function transfer(address _to, uint256 _value)
    public
    virtual
    returns (bool success);
  // Get the account balance of another account with address _owner
  function balanceOf(address _owner)
    public
    virtual
    view
    returns (uint256 balance);
}
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
interface IForwarder is IERC165 {
  /**
   * Sets the autoflush721 parameter.
   *
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(bool autoFlush) external;
  /**
   * Sets the autoflush1155 parameter.
   *
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(bool autoFlush) external;
  /**
   * Execute a token transfer of the full balance from the forwarder token to the parent address
   *
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushTokens(address tokenContractAddress) external;
  /**
   * Execute a nft transfer from the forwarder to the parent address
   *
   * @param tokenContractAddress the address of the ERC721 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC721Token(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC1155Tokens(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a batch nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenIds The token ids of the nfts
   */
  function batchFlushERC1155Tokens(
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../IERC1155Receiver.sol";
import "../../../utils/introspection/ERC165.sol";
/**
 * @dev _Available since v3.1._
 */
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.10;
import '@openzeppelin/contracts/token/ERC1155/IERC1155.sol';
import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol';
import './ERC20Interface.sol';
import './TransferHelper.sol';
import './IForwarder.sol';
/**
 * Contract that will forward any incoming Ether to the creator of the contract
 *
 */
contract Forwarder is IERC721Receiver, ERC1155Receiver, IForwarder {
  // Address to which any funds sent to this contract will be forwarded
  address public parentAddress;
  bool public autoFlush721 = true;
  bool public autoFlush1155 = true;
  event ForwarderDeposited(address from, uint256 value, bytes data);
  /**
   * Initialize the contract, and sets the destination address to that of the creator
   */
  function init(
    address _parentAddress,
    bool _autoFlush721,
    bool _autoFlush1155
  ) external onlyUninitialized {
    parentAddress = _parentAddress;
    uint256 value = address(this).balance;
    // set whether we want to automatically flush erc721/erc1155 tokens or not
    autoFlush721 = _autoFlush721;
    autoFlush1155 = _autoFlush1155;
    if (value == 0) {
      return;
    }
    (bool success, ) = parentAddress.call{ value: value }('');
    require(success, 'Flush failed');
    // NOTE: since we are forwarding on initialization,
    // we don't have the context of the original sender.
    // We still emit an event about the forwarding but set
    // the sender to the forwarder itself
    emit ForwarderDeposited(address(this), value, msg.data);
  }
  /**
   * Modifier that will execute internal code block only if the sender is the parent address
   */
  modifier onlyParent {
    require(msg.sender == parentAddress, 'Only Parent');
    _;
  }
  /**
   * Modifier that will execute internal code block only if the contract has not been initialized yet
   */
  modifier onlyUninitialized {
    require(parentAddress == address(0x0), 'Already initialized');
    _;
  }
  /**
   * Default function; Gets called when data is sent but does not match any other function
   */
  fallback() external payable {
    flush();
  }
  /**
   * Default function; Gets called when Ether is deposited with no data, and forwards it to the parent address
   */
  receive() external payable {
    flush();
  }
  /**
   * @inheritdoc IForwarder
   */
  function setAutoFlush721(bool autoFlush)
    external
    virtual
    override
    onlyParent
  {
    autoFlush721 = autoFlush;
  }
  /**
   * @inheritdoc IForwarder
   */
  function setAutoFlush1155(bool autoFlush)
    external
    virtual
    override
    onlyParent
  {
    autoFlush1155 = autoFlush;
  }
  /**
   * ERC721 standard callback function for when a ERC721 is transfered. The forwarder will send the nft
   * to the base wallet once the nft contract invokes this method after transfering the nft.
   *
   * @param _operator The address which called `safeTransferFrom` function
   * @param _from The address of the sender
   * @param _tokenId The token id of the nft
   * @param data Additional data with no specified format, sent in call to `_to`
   */
  function onERC721Received(
    address _operator,
    address _from,
    uint256 _tokenId,
    bytes memory data
  ) external virtual override returns (bytes4) {
    if (autoFlush721) {
      IERC721 instance = IERC721(msg.sender);
      require(
        instance.supportsInterface(type(IERC721).interfaceId),
        'The caller does not support the ERC721 interface'
      );
      // this won't work for ERC721 re-entrancy
      instance.safeTransferFrom(address(this), parentAddress, _tokenId, data);
    }
    return this.onERC721Received.selector;
  }
  function callFromParent(
    address target,
    uint256 value,
    bytes calldata data
  ) external onlyParent returns (bytes memory) {
    (bool success, bytes memory returnedData) = target.call{ value: value }(
      data
    );
    require(success, 'Parent call execution failed');
    return returnedData;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155Received(
    address _operator,
    address _from,
    uint256 id,
    uint256 value,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    IERC1155 instance = IERC1155(msg.sender);
    require(
      instance.supportsInterface(type(IERC1155).interfaceId),
      'The caller does not support the IERC1155 interface'
    );
    if (autoFlush1155) {
      instance.safeTransferFrom(address(this), parentAddress, id, value, data);
    }
    return this.onERC1155Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155BatchReceived(
    address _operator,
    address _from,
    uint256[] calldata ids,
    uint256[] calldata values,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    IERC1155 instance = IERC1155(msg.sender);
    require(
      instance.supportsInterface(type(IERC1155).interfaceId),
      'The caller does not support the IERC1155 interface'
    );
    if (autoFlush1155) {
      instance.safeBatchTransferFrom(
        address(this),
        parentAddress,
        ids,
        values,
        data
      );
    }
    return this.onERC1155BatchReceived.selector;
  }
  /**
   * @inheritdoc IForwarder
   */
  function flushTokens(address tokenContractAddress)
    external
    virtual
    override
    onlyParent
  {
    ERC20Interface instance = ERC20Interface(tokenContractAddress);
    address forwarderAddress = address(this);
    uint256 forwarderBalance = instance.balanceOf(forwarderAddress);
    if (forwarderBalance == 0) {
      return;
    }
    TransferHelper.safeTransfer(
      tokenContractAddress,
      parentAddress,
      forwarderBalance
    );
  }
  /**
   * @inheritdoc IForwarder
   */
  function flushERC721Token(address tokenContractAddress, uint256 tokenId)
    external
    virtual
    override
    onlyParent
  {
    IERC721 instance = IERC721(tokenContractAddress);
    require(
      instance.supportsInterface(type(IERC721).interfaceId),
      'The tokenContractAddress does not support the ERC721 interface'
    );
    address ownerAddress = instance.ownerOf(tokenId);
    instance.transferFrom(ownerAddress, parentAddress, tokenId);
  }
  /**
   * @inheritdoc IForwarder
   */
  function flushERC1155Tokens(address tokenContractAddress, uint256 tokenId)
    external
    virtual
    override
    onlyParent
  {
    IERC1155 instance = IERC1155(tokenContractAddress);
    require(
      instance.supportsInterface(type(IERC1155).interfaceId),
      'The caller does not support the IERC1155 interface'
    );
    address forwarderAddress = address(this);
    uint256 forwarderBalance = instance.balanceOf(forwarderAddress, tokenId);
    instance.safeTransferFrom(
      forwarderAddress,
      parentAddress,
      tokenId,
      forwarderBalance,
      ''
    );
  }
  /**
   * @inheritdoc IForwarder
   */
  function batchFlushERC1155Tokens(
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external virtual override onlyParent {
    IERC1155 instance = IERC1155(tokenContractAddress);
    require(
      instance.supportsInterface(type(IERC1155).interfaceId),
      'The caller does not support the IERC1155 interface'
    );
    address forwarderAddress = address(this);
    uint256[] memory amounts = new uint256[](tokenIds.length);
    for (uint256 i = 0; i < tokenIds.length; i++) {
      amounts[i] = instance.balanceOf(forwarderAddress, tokenIds[i]);
    }
    instance.safeBatchTransferFrom(
      forwarderAddress,
      parentAddress,
      tokenIds,
      amounts,
      ''
    );
  }
  /**
   * Flush the entire balance of the contract to the parent address.
   */
  function flush() public {
    uint256 value = address(this).balance;
    if (value == 0) {
      return;
    }
    (bool success, ) = parentAddress.call{ value: value }('');
    require(success, 'Flush failed');
    emit ForwarderDeposited(msg.sender, value, msg.data);
  }
  /**
   * @inheritdoc IERC165
   */
  function supportsInterface(bytes4 interfaceId)
    public
    virtual
    override(ERC1155Receiver, IERC165)
    view
    returns (bool)
  {
    return
      interfaceId == type(IForwarder).interfaceId ||
      super.supportsInterface(interfaceId);
  }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );
    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);
    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);
    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);
    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;
    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);
    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../IERC1155Receiver.sol";
import "../../../utils/introspection/ERC165.sol";
/**
 * @dev _Available since v3.1._
 */
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.10;
/**
 * Contract that exposes the needed erc20 token functions
 */
abstract contract ERC20Interface {
  // Send _value amount of tokens to address _to
  function transfer(address _to, uint256 _value)
    public
    virtual
    returns (bool success);
  // Get the account balance of another account with address _owner
  function balanceOf(address _owner)
    public
    virtual
    view
    returns (uint256 balance);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// source: https://github.com/Uniswap/solidity-lib/blob/master/contracts/libraries/TransferHelper.sol
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/Address.sol';
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
  function safeTransfer(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transfer(address,uint256)')));
    (bool success, bytes memory data) = token.call(
      abi.encodeWithSelector(0xa9059cbb, to, value)
    );
    require(
      success && (data.length == 0 || abi.decode(data, (bool))),
      'TransferHelper::safeTransfer: transfer failed'
    );
  }
  function safeTransferFrom(
    address token,
    address from,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
    (bool success, bytes memory returndata) = token.call(
      abi.encodeWithSelector(0x23b872dd, from, to, value)
    );
    Address.verifyCallResult(
      success,
      returndata,
      'TransferHelper::transferFrom: transferFrom failed'
    );
  }
}
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
interface IForwarder is IERC165 {
  /**
   * Sets the autoflush721 parameter.
   *
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(bool autoFlush) external;
  /**
   * Sets the autoflush1155 parameter.
   *
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(bool autoFlush) external;
  /**
   * Execute a token transfer of the full balance from the forwarder token to the parent address
   *
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushTokens(address tokenContractAddress) external;
  /**
   * Execute a nft transfer from the forwarder to the parent address
   *
   * @param tokenContractAddress the address of the ERC721 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC721Token(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC1155Tokens(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a batch nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenIds The token ids of the nfts
   */
  function batchFlushERC1155Tokens(
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.10;
import './TransferHelper.sol';
import './ERC20Interface.sol';
import './IForwarder.sol';
/** ERC721, ERC1155 imports */
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol';
/**
 *
 * WalletSimple
 * ============
 *
 * Basic multi-signer wallet designed for use in a co-signing environment where 2 signatures are required to move funds.
 * Typically used in a 2-of-3 signing configuration. Uses ecrecover to allow for 2 signatures in a single transaction.
 *
 * The first signature is created on the operation hash (see Data Formats) and passed to sendMultiSig/sendMultiSigToken
 * The signer is determined by verifyMultiSig().
 *
 * The second signature is created by the submitter of the transaction and determined by msg.signer.
 *
 * Data Formats
 * ============
 *
 * The signature is created with ethereumjs-util.ecsign(operationHash).
 * Like the eth_sign RPC call, it packs the values as a 65-byte array of [r, s, v].
 * Unlike eth_sign, the message is not prefixed.
 *
 * The operationHash the result of keccak256(prefix, toAddress, value, data, expireTime).
 * For ether transactions, `prefix` is "ETHER".
 * For token transaction, `prefix` is "ERC20" and `data` is the tokenContractAddress.
 *
 *
 */
contract WalletSimple is IERC721Receiver, ERC1155Receiver {
  // Events
  event Deposited(address from, uint256 value, bytes data);
  event SafeModeActivated(address msgSender);
  event Transacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation, // Operation hash (see Data Formats)
    address toAddress, // The address the transaction was sent to
    uint256 value, // Amount of Wei sent to the address
    bytes data // Data sent when invoking the transaction
  );
  event BatchTransfer(address sender, address recipient, uint256 value);
  // this event shows the other signer and the operation hash that they signed
  // specific batch transfer events are emitted in Batcher
  event BatchTransacted(
    address msgSender, // Address of the sender of the message initiating the transaction
    address otherSigner, // Address of the signer (second signature) used to initiate the transaction
    bytes32 operation // Operation hash (see Data Formats)
  );
  // Public fields
  mapping(address => bool) public signers; // The addresses that can co-sign transactions on the wallet
  bool public safeMode = false; // When active, wallet may only send to signer addresses
  bool public initialized = false; // True if the contract has been initialized
  // Internal fields
  uint256 private constant MAX_SEQUENCE_ID_INCREASE = 10000;
  uint256 constant SEQUENCE_ID_WINDOW_SIZE = 10;
  uint256[SEQUENCE_ID_WINDOW_SIZE] recentSequenceIds;
  /**
   * Set up a simple multi-sig wallet by specifying the signers allowed to be used on this wallet.
   * 2 signers will be required to send a transaction from this wallet.
   * Note: The sender is NOT automatically added to the list of signers.
   * Signers CANNOT be changed once they are set
   *
   * @param allowedSigners An array of signers on the wallet
   */
  function init(address[] calldata allowedSigners) external onlyUninitialized {
    require(allowedSigners.length == 3, 'Invalid number of signers');
    for (uint8 i = 0; i < allowedSigners.length; i++) {
      require(allowedSigners[i] != address(0), 'Invalid signer');
      signers[allowedSigners[i]] = true;
    }
    initialized = true;
  }
  /**
   * Get the network identifier that signers must sign over
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER';
  }
  /**
   * Get the network identifier that signers must sign over for token transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getTokenNetworkId() internal virtual pure returns (string memory) {
    return 'ERC20';
  }
  /**
   * Get the network identifier that signers must sign over for batch transfers
   * This provides protection signatures being replayed on other chains
   * This must be a virtual function because chain-specific contracts will need
   *    to override with their own network ids. It also can't be a field
   *    to allow this contract to be used by proxy with delegatecall, which will
   *    not pick up on state variables
   */
  function getBatchNetworkId() internal virtual pure returns (string memory) {
    return 'ETHER-Batch';
  }
  /**
   * Determine if an address is a signer on this wallet
   * @param signer address to check
   * returns boolean indicating whether address is signer or not
   */
  function isSigner(address signer) public view returns (bool) {
    return signers[signer];
  }
  /**
   * Modifier that will execute internal code block only if the sender is an authorized signer on this wallet
   */
  modifier onlySigner {
    require(isSigner(msg.sender), 'Non-signer in onlySigner method');
    _;
  }
  /**
   * Modifier that will execute internal code block only if the contract has not been initialized yet
   */
  modifier onlyUninitialized {
    require(!initialized, 'Contract already initialized');
    _;
  }
  /**
   * Gets called when a transaction is received with data that does not match any other method
   */
  fallback() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      emit Deposited(msg.sender, msg.value, msg.data);
    }
  }
  /**
   * Gets called when a transaction is received with ether and no data
   */
  receive() external payable {
    if (msg.value > 0) {
      // Fire deposited event if we are receiving funds
      // message data is always empty for receive. If there is data it is sent to fallback function.
      emit Deposited(msg.sender, msg.value, '');
    }
  }
  /**
   * Execute a multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in Wei to be sent
   * @param data the data to send to the toAddress when invoking the transaction
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSig(
    address toAddress,
    uint256 value,
    bytes calldata data,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getNetworkId(),
        toAddress,
        value,
        data,
        expireTime,
        sequenceId
      )
    );
    address otherSigner = verifyMultiSig(
      toAddress,
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    // Success, send the transaction
    (bool success, ) = toAddress.call{ value: value }(data);
    require(success, 'Call execution failed');
    emit Transacted(
      msg.sender,
      otherSigner,
      operationHash,
      toAddress,
      value,
      data
    );
  }
  /**
   * Execute a batched multi-signature transaction from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   * The recipients and values to send are encoded in two arrays, where for index i, recipients[i] will be sent values[i].
   *
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigBatch(
    address[] calldata recipients,
    uint256[] calldata values,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    require(recipients.length != 0, 'Not enough recipients');
    require(
      recipients.length == values.length,
      'Unequal recipients and values'
    );
    require(recipients.length < 256, 'Too many recipients, max 255');
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getBatchNetworkId(),
        recipients,
        values,
        expireTime,
        sequenceId
      )
    );
    // the first parameter (toAddress) is used to ensure transactions in safe mode only go to a signer
    // if in safe mode, we should use normal sendMultiSig to recover, so this check will always fail if in safe mode
    require(!safeMode, 'Batch in safe mode');
    address otherSigner = verifyMultiSig(
      address(0x0),
      operationHash,
      signature,
      expireTime,
      sequenceId
    );
    batchTransfer(recipients, values);
    emit BatchTransacted(msg.sender, otherSigner, operationHash);
  }
  /**
   * Transfer funds in a batch to each of recipients
   * @param recipients The list of recipients to send to
   * @param values The list of values to send to recipients.
   *  The recipient with index i in recipients array will be sent values[i].
   *  Thus, recipients and values must be the same length
   */
  function batchTransfer(
    address[] calldata recipients,
    uint256[] calldata values
  ) internal {
    for (uint256 i = 0; i < recipients.length; i++) {
      require(address(this).balance >= values[i], 'Insufficient funds');
      (bool success, ) = recipients[i].call{ value: values[i] }('');
      require(success, 'Call failed');
      emit BatchTransfer(msg.sender, recipients[i], values[i]);
    }
  }
  /**
   * Execute a multi-signature token transfer from this wallet using 2 signers: one from msg.sender and the other from ecrecover.
   * Sequence IDs are numbers starting from 1. They are used to prevent replay attacks and may not be repeated.
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param value the amount in tokens to be sent
   * @param tokenContractAddress the address of the erc20 token contract
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * @param signature see Data Formats
   */
  function sendMultiSigToken(
    address toAddress,
    uint256 value,
    address tokenContractAddress,
    uint256 expireTime,
    uint256 sequenceId,
    bytes calldata signature
  ) external onlySigner {
    // Verify the other signer
    bytes32 operationHash = keccak256(
      abi.encodePacked(
        getTokenNetworkId(),
        toAddress,
        value,
        tokenContractAddress,
        expireTime,
        sequenceId
      )
    );
    verifyMultiSig(toAddress, operationHash, signature, expireTime, sequenceId);
    TransferHelper.safeTransfer(tokenContractAddress, toAddress, value);
  }
  /**
   * Execute a token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushTokens(tokenContractAddress);
  }
  /**
   * Execute a ERC721 token flush from one of the forwarder addresses. This transfer needs only a single signature and can be done by any signer
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushERC721ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC721Token(tokenContractAddress, tokenId);
  }
  /**
   * Execute a ERC1155 batch token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   */
  function batchFlushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.batchFlushERC1155Tokens(tokenContractAddress, tokenIds);
  }
  /**
   * Execute a ERC1155 token flush from one of the forwarder addresses.
   * This transfer needs only a single signature and can be done by any signer.
   *
   * @param forwarderAddress the address of the forwarder address to flush the tokens from
   * @param tokenContractAddress the address of the erc1155 token contract
   * @param tokenId the token id associated with the ERC1155
   */
  function flushERC1155ForwarderTokens(
    address payable forwarderAddress,
    address tokenContractAddress,
    uint256 tokenId
  ) external onlySigner {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.flushERC1155Tokens(tokenContractAddress, tokenId);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush721(autoFlush);
  }
  /**
   * Sets the autoflush 721 parameter on the forwarder.
   *
   * @param forwarderAddress the address of the forwarder to toggle.
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(address forwarderAddress, bool autoFlush)
    external
    onlySigner
  {
    IForwarder forwarder = IForwarder(forwarderAddress);
    forwarder.setAutoFlush1155(autoFlush);
  }
  /**
   * Do common multisig verification for both eth sends and erc20token transfers
   *
   * @param toAddress the destination address to send an outgoing transaction
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * @param expireTime the number of seconds since 1970 for which this transaction is valid
   * @param sequenceId the unique sequence id obtainable from getNextSequenceId
   * returns address that has created the signature
   */
  function verifyMultiSig(
    address toAddress,
    bytes32 operationHash,
    bytes calldata signature,
    uint256 expireTime,
    uint256 sequenceId
  ) private returns (address) {
    address otherSigner = recoverAddressFromSignature(operationHash, signature);
    // Verify if we are in safe mode. In safe mode, the wallet can only send to signers
    require(!safeMode || isSigner(toAddress), 'External transfer in safe mode');
    // Verify that the transaction has not expired
    require(expireTime >= block.timestamp, 'Transaction expired');
    // Try to insert the sequence ID. Will revert if the sequence id was invalid
    tryInsertSequenceId(sequenceId);
    require(isSigner(otherSigner), 'Invalid signer');
    require(otherSigner != msg.sender, 'Signers cannot be equal');
    return otherSigner;
  }
  /**
   * ERC721 standard callback function for when a ERC721 is transfered.
   *
   * @param _operator The address of the nft contract
   * @param _from The address of the sender
   * @param _tokenId The token id of the nft
   * @param _data Additional data with no specified format, sent in call to `_to`
   */
  function onERC721Received(
    address _operator,
    address _from,
    uint256 _tokenId,
    bytes memory _data
  ) external virtual override returns (bytes4) {
    return this.onERC721Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155Received(
    address _operator,
    address _from,
    uint256 id,
    uint256 value,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155Received.selector;
  }
  /**
   * @inheritdoc IERC1155Receiver
   */
  function onERC1155BatchReceived(
    address _operator,
    address _from,
    uint256[] calldata ids,
    uint256[] calldata values,
    bytes calldata data
  ) external virtual override returns (bytes4) {
    return this.onERC1155BatchReceived.selector;
  }
  /**
   * Irrevocably puts contract into safe mode. When in this mode, transactions may only be sent to signing addresses.
   */
  function activateSafeMode() external onlySigner {
    safeMode = true;
    emit SafeModeActivated(msg.sender);
  }
  /**
   * Gets signer's address using ecrecover
   * @param operationHash see Data Formats
   * @param signature see Data Formats
   * returns address recovered from the signature
   */
  function recoverAddressFromSignature(
    bytes32 operationHash,
    bytes memory signature
  ) private pure returns (address) {
    require(signature.length == 65, 'Invalid signature - wrong length');
    // We need to unpack the signature, which is given as an array of 65 bytes (like eth.sign)
    bytes32 r;
    bytes32 s;
    uint8 v;
    // solhint-disable-next-line
    assembly {
      r := mload(add(signature, 32))
      s := mload(add(signature, 64))
      v := and(mload(add(signature, 65)), 255)
    }
    if (v < 27) {
      v += 27; // Ethereum versions are 27 or 28 as opposed to 0 or 1 which is submitted by some signing libs
    }
    // protect against signature malleability
    // S value must be in the lower half orader
    // reference: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/051d340171a93a3d401aaaea46b4b62fa81e5d7c/contracts/cryptography/ECDSA.sol#L53
    require(
      uint256(s) <=
        0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0,
      "ECDSA: invalid signature 's' value"
    );
    // note that this returns 0 if the signature is invalid
    // Since 0x0 can never be a signer, when the recovered signer address
    // is checked against our signer list, that 0x0 will cause an invalid signer failure
    return ecrecover(operationHash, v, r, s);
  }
  /**
   * Verify that the sequence id has not been used before and inserts it. Throws if the sequence ID was not accepted.
   * We collect a window of up to 10 recent sequence ids, and allow any sequence id that is not in the window and
   * greater than the minimum element in the window.
   * @param sequenceId to insert into array of stored ids
   */
  function tryInsertSequenceId(uint256 sequenceId) private onlySigner {
    // Keep a pointer to the lowest value element in the window
    uint256 lowestValueIndex = 0;
    // fetch recentSequenceIds into memory for function context to avoid unnecessary sloads
      uint256[SEQUENCE_ID_WINDOW_SIZE] memory _recentSequenceIds
     = recentSequenceIds;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      require(_recentSequenceIds[i] != sequenceId, 'Sequence ID already used');
      if (_recentSequenceIds[i] < _recentSequenceIds[lowestValueIndex]) {
        lowestValueIndex = i;
      }
    }
    // The sequence ID being used is lower than the lowest value in the window
    // so we cannot accept it as it may have been used before
    require(
      sequenceId > _recentSequenceIds[lowestValueIndex],
      'Sequence ID below window'
    );
    // Block sequence IDs which are much higher than the lowest value
    // This prevents people blocking the contract by using very large sequence IDs quickly
    require(
      sequenceId <=
        (_recentSequenceIds[lowestValueIndex] + MAX_SEQUENCE_ID_INCREASE),
      'Sequence ID above maximum'
    );
    recentSequenceIds[lowestValueIndex] = sequenceId;
  }
  /**
   * Gets the next available sequence ID for signing when using executeAndConfirm
   * returns the sequenceId one higher than the highest currently stored
   */
  function getNextSequenceId() external view returns (uint256) {
    uint256 highestSequenceId = 0;
    for (uint256 i = 0; i < SEQUENCE_ID_WINDOW_SIZE; i++) {
      if (recentSequenceIds[i] > highestSequenceId) {
        highestSequenceId = recentSequenceIds[i];
      }
    }
    return highestSequenceId + 1;
  }
}
// SPDX-License-Identifier: GPL-3.0-or-later
// source: https://github.com/Uniswap/solidity-lib/blob/master/contracts/libraries/TransferHelper.sol
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/Address.sol';
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
  function safeTransfer(
    address token,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transfer(address,uint256)')));
    (bool success, bytes memory data) = token.call(
      abi.encodeWithSelector(0xa9059cbb, to, value)
    );
    require(
      success && (data.length == 0 || abi.decode(data, (bool))),
      'TransferHelper::safeTransfer: transfer failed'
    );
  }
  function safeTransferFrom(
    address token,
    address from,
    address to,
    uint256 value
  ) internal {
    // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
    (bool success, bytes memory returndata) = token.call(
      abi.encodeWithSelector(0x23b872dd, from, to, value)
    );
    Address.verifyCallResult(
      success,
      returndata,
      'TransferHelper::transferFrom: transferFrom failed'
    );
  }
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.10;
/**
 * Contract that exposes the needed erc20 token functions
 */
abstract contract ERC20Interface {
  // Send _value amount of tokens to address _to
  function transfer(address _to, uint256 _value)
    public
    virtual
    returns (bool success);
  // Get the account balance of another account with address _owner
  function balanceOf(address _owner)
    public
    virtual
    view
    returns (uint256 balance);
}
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
interface IForwarder is IERC165 {
  /**
   * Sets the autoflush721 parameter.
   *
   * @param autoFlush whether to autoflush erc721 tokens
   */
  function setAutoFlush721(bool autoFlush) external;
  /**
   * Sets the autoflush1155 parameter.
   *
   * @param autoFlush whether to autoflush erc1155 tokens
   */
  function setAutoFlush1155(bool autoFlush) external;
  /**
   * Execute a token transfer of the full balance from the forwarder token to the parent address
   *
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushTokens(address tokenContractAddress) external;
  /**
   * Execute a nft transfer from the forwarder to the parent address
   *
   * @param tokenContractAddress the address of the ERC721 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC721Token(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenId The token id of the nft
   */
  function flushERC1155Tokens(address tokenContractAddress, uint256 tokenId)
    external;
  /**
   * Execute a batch nft transfer from the forwarder to the parent address.
   *
   * @param tokenContractAddress the address of the ERC1155 NFT contract
   * @param tokenIds The token ids of the nfts
   */
  function batchFlushERC1155Tokens(
    address tokenContractAddress,
    uint256[] calldata tokenIds
  ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/utils/ERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../IERC1155Receiver.sol";
import "../../../utils/introspection/ERC165.sol";
/**
 * @dev _Available since v3.1._
 */
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}