{"Address.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)\r\n\r\npragma solidity ^0.8.1;\r\n\r\n/**\r\n * @dev Collection of functions related to the address type\r\n */\r\nlibrary Address {\r\n    /**\r\n     * @dev Returns true if `account` is a contract.\r\n     *\r\n     * [IMPORTANT]\r\n     * ====\r\n     * It is unsafe to assume that an address for which this function returns\r\n     * false is an externally-owned account (EOA) and not a contract.\r\n     *\r\n     * Among others, `isContract` will return false for the following\r\n     * types of addresses:\r\n     *\r\n     *  - an externally-owned account\r\n     *  - a contract in construction\r\n     *  - an address where a contract will be created\r\n     *  - an address where a contract lived, but was destroyed\r\n     * ====\r\n     *\r\n     * [IMPORTANT]\r\n     * ====\r\n     * You shouldn\u0027t rely on `isContract` to protect against flash loan attacks!\r\n     *\r\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\r\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\r\n     * constructor.\r\n     * ====\r\n     */\r\n    function isContract(address account) internal view returns (bool) {\r\n        // This method relies on extcodesize/address.code.length, which returns 0\r\n        // for contracts in construction, since the code is only stored at the end\r\n        // of the constructor execution.\r\n\r\n        return account.code.length \u003e 0;\r\n    }\r\n\r\n    /**\r\n     * @dev Replacement for Solidity\u0027s `transfer`: sends `amount` wei to\r\n     * `recipient`, forwarding all available gas and reverting on errors.\r\n     *\r\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\r\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\r\n     * imposed by `transfer`, making them unable to receive funds via\r\n     * `transfer`. {sendValue} removes this limitation.\r\n     *\r\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\r\n     *\r\n     * IMPORTANT: because control is transferred to `recipient`, care must be\r\n     * taken to not create reentrancy vulnerabilities. Consider using\r\n     * {ReentrancyGuard} or the\r\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\r\n     */\r\n    function sendValue(address payable recipient, uint256 amount) internal {\r\n        require(address(this).balance \u003e= amount, \"Address: insufficient balance\");\r\n\r\n        (bool success, ) = recipient.call{value: amount}(\"\");\r\n        require(success, \"Address: unable to send value, recipient may have reverted\");\r\n    }\r\n\r\n    /**\r\n     * @dev Performs a Solidity function call using a low level `call`. A\r\n     * plain `call` is an unsafe replacement for a function call: use this\r\n     * function instead.\r\n     *\r\n     * If `target` reverts with a revert reason, it is bubbled up by this\r\n     * function (like regular Solidity function calls).\r\n     *\r\n     * Returns the raw returned data. To convert to the expected return value,\r\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `target` must be a contract.\r\n     * - calling `target` with `data` must not revert.\r\n     *\r\n     * _Available since v3.1._\r\n     */\r\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\r\n        return functionCall(target, data, \"Address: low-level call failed\");\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\r\n     * `errorMessage` as a fallback revert reason when `target` reverts.\r\n     *\r\n     * _Available since v3.1._\r\n     */\r\n    function functionCall(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) internal returns (bytes memory) {\r\n        return functionCallWithValue(target, data, 0, errorMessage);\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\r\n     * but also transferring `value` wei to `target`.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - the calling contract must have an ETH balance of at least `value`.\r\n     * - the called Solidity function must be `payable`.\r\n     *\r\n     * _Available since v3.1._\r\n     */\r\n    function functionCallWithValue(\r\n        address target,\r\n        bytes memory data,\r\n        uint256 value\r\n    ) internal returns (bytes memory) {\r\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\r\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\r\n     *\r\n     * _Available since v3.1._\r\n     */\r\n    function functionCallWithValue(\r\n        address target,\r\n        bytes memory data,\r\n        uint256 value,\r\n        string memory errorMessage\r\n    ) internal returns (bytes memory) {\r\n        require(address(this).balance \u003e= value, \"Address: insufficient balance for call\");\r\n        require(isContract(target), \"Address: call to non-contract\");\r\n\r\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\r\n        return verifyCallResult(success, returndata, errorMessage);\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\r\n     * but performing a static call.\r\n     *\r\n     * _Available since v3.3._\r\n     */\r\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\r\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\r\n     * but performing a static call.\r\n     *\r\n     * _Available since v3.3._\r\n     */\r\n    function functionStaticCall(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) internal view returns (bytes memory) {\r\n        require(isContract(target), \"Address: static call to non-contract\");\r\n\r\n        (bool success, bytes memory returndata) = target.staticcall(data);\r\n        return verifyCallResult(success, returndata, errorMessage);\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\r\n     * but performing a delegate call.\r\n     *\r\n     * _Available since v3.4._\r\n     */\r\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\r\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\r\n    }\r\n\r\n    /**\r\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\r\n     * but performing a delegate call.\r\n     *\r\n     * _Available since v3.4._\r\n     */\r\n    function functionDelegateCall(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) internal returns (bytes memory) {\r\n        require(isContract(target), \"Address: delegate call to non-contract\");\r\n\r\n        (bool success, bytes memory returndata) = target.delegatecall(data);\r\n        return verifyCallResult(success, returndata, errorMessage);\r\n    }\r\n\r\n    /**\r\n     * @dev Tool to verifies that a low level call was successful, and revert if it wasn\u0027t, either by bubbling the\r\n     * revert reason using the provided one.\r\n     *\r\n     * _Available since v4.3._\r\n     */\r\n    function verifyCallResult(\r\n        bool success,\r\n        bytes memory returndata,\r\n        string memory errorMessage\r\n    ) internal pure returns (bytes memory) {\r\n        if (success) {\r\n            return returndata;\r\n        } else {\r\n            // Look for revert reason and bubble it up if present\r\n            if (returndata.length \u003e 0) {\r\n                // The easiest way to bubble the revert reason is using memory via assembly\r\n\r\n                assembly {\r\n                    let returndata_size := mload(returndata)\r\n                    revert(add(32, returndata), returndata_size)\r\n                }\r\n            } else {\r\n                revert(errorMessage);\r\n            }\r\n        }\r\n    }\r\n}"},"Context.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\n/**\r\n * @dev Provides information about the current execution context, including the\r\n * sender of the transaction and its data. While these are generally available\r\n * via msg.sender and msg.data, they should not be accessed in such a direct\r\n * manner, since when dealing with meta-transactions the account sending and\r\n * paying for execution may not be the actual sender (as far as an application\r\n * is concerned).\r\n *\r\n * This contract is only required for intermediate, library-like contracts.\r\n */\r\nabstract contract Context {\r\n    function _msgSender() internal view virtual returns (address) {\r\n        return msg.sender;\r\n    }\r\n\r\n    function _msgData() internal view virtual returns (bytes calldata) {\r\n        return msg.data;\r\n    }\r\n}"},"ERC165.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\nimport \"./IERC165.sol\";\r\n\r\n/**\r\n * @dev Implementation of the {IERC165} interface.\r\n *\r\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\r\n * for the additional interface id that will be supported. For example:\r\n *\r\n * ```solidity\r\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\r\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\r\n * }\r\n * ```\r\n *\r\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\r\n */\r\nabstract contract ERC165 is IERC165 {\r\n    /**\r\n     * @dev See {IERC165-supportsInterface}.\r\n     */\r\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\r\n        return interfaceId == type(IERC165).interfaceId;\r\n    }\r\n}"},"ERC2981.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts (last updated v4.5.0) (token/common/ERC2981.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\nimport \"./IERC2981.sol\";\r\nimport \"./ERC165.sol\";\r\n\r\n/**\r\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\r\n *\r\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\r\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\r\n *\r\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\r\n * fee is specified in basis points by default.\r\n *\r\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\r\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\r\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\r\n *\r\n * _Available since v4.5._\r\n */\r\nabstract contract ERC2981 is IERC2981, ERC165 {\r\n    struct RoyaltyInfo {\r\n        address receiver;\r\n        uint96 royaltyFraction;\r\n    }\r\n\r\n    RoyaltyInfo private _defaultRoyaltyInfo;\r\n    mapping(uint256 =\u003e RoyaltyInfo) private _tokenRoyaltyInfo;\r\n\r\n    /**\r\n     * @dev See {IERC165-supportsInterface}.\r\n     */\r\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\r\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\r\n    }\r\n\r\n    /**\r\n     * @inheritdoc IERC2981\r\n     */\r\n    function royaltyInfo(uint256 _tokenId, uint256 _salePrice)\r\n        external\r\n        view\r\n        virtual\r\n        override\r\n        returns (address, uint256)\r\n    {\r\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];\r\n\r\n        if (royalty.receiver == address(0)) {\r\n            royalty = _defaultRoyaltyInfo;\r\n        }\r\n\r\n        uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();\r\n\r\n        return (royalty.receiver, royaltyAmount);\r\n    }\r\n\r\n    /**\r\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\r\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\r\n     * override.\r\n     */\r\n    function _feeDenominator() internal pure virtual returns (uint96) {\r\n        return 10000;\r\n    }\r\n\r\n    /**\r\n     * @dev Sets the royalty information that all ids in this contract will default to.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `receiver` cannot be the zero address.\r\n     * - `feeNumerator` cannot be greater than the fee denominator.\r\n     */\r\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\r\n        require(feeNumerator \u003c= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\r\n        require(receiver != address(0), \"ERC2981: invalid receiver\");\r\n\r\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\r\n    }\r\n\r\n    /**\r\n     * @dev Removes default royalty information.\r\n     */\r\n    function _deleteDefaultRoyalty() internal virtual {\r\n        delete _defaultRoyaltyInfo;\r\n    }\r\n\r\n    /**\r\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `tokenId` must be already minted.\r\n     * - `receiver` cannot be the zero address.\r\n     * - `feeNumerator` cannot be greater than the fee denominator.\r\n     */\r\n    function _setTokenRoyalty(\r\n        uint256 tokenId,\r\n        address receiver,\r\n        uint96 feeNumerator\r\n    ) internal virtual {\r\n        require(feeNumerator \u003c= _feeDenominator(), \"ERC2981: royalty fee will exceed salePrice\");\r\n        require(receiver != address(0), \"ERC2981: Invalid parameters\");\r\n\r\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\r\n    }\r\n\r\n    /**\r\n     * @dev Resets royalty information for the token id back to the global default.\r\n     */\r\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\r\n        delete _tokenRoyaltyInfo[tokenId];\r\n    }\r\n}"},"ERC721A.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// Creator: Chiru Labs\r\n\r\npragma solidity ^0.8.4;\r\n\r\nimport \u0027./IERC721.sol\u0027;\r\nimport \u0027./IERC721Receiver.sol\u0027;\r\nimport \u0027./IERC721Metadata.sol\u0027;\r\nimport \u0027./Address.sol\u0027;\r\nimport \u0027./Context.sol\u0027;\r\nimport \u0027./Strings.sol\u0027;\r\nimport \u0027./ERC165.sol\u0027;\r\n\r\nerror ApprovalCallerNotOwnerNorApproved();\r\nerror ApprovalQueryForNonexistentToken();\r\nerror ApproveToCaller();\r\nerror ApprovalToCurrentOwner();\r\nerror BalanceQueryForZeroAddress();\r\nerror MintToZeroAddress();\r\nerror MintZeroQuantity();\r\nerror OwnerQueryForNonexistentToken();\r\nerror TransferCallerNotOwnerNorApproved();\r\nerror TransferFromIncorrectOwner();\r\nerror TransferToNonERC721ReceiverImplementer();\r\nerror TransferToZeroAddress();\r\nerror URIQueryForNonexistentToken();\r\n\r\n/**\r\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\r\n * the Metadata extension. Built to optimize for lower gas during batch mints.\r\n *\r\n * Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).\r\n *\r\n * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\r\n *\r\n * Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).\r\n */\r\ncontract ERC721A is Context, ERC165, IERC721, IERC721Metadata {\r\n    using Address for address;\r\n    using Strings for uint256;\r\n\r\n    // Compiler will pack this into a single 256bit word.\r\n    struct TokenOwnership {\r\n        // The address of the owner.\r\n        address addr;\r\n        // Keeps track of the start time of ownership with minimal overhead for tokenomics.\r\n        uint64 startTimestamp;\r\n        // Whether the token has been burned.\r\n        bool burned;\r\n    }\r\n\r\n    // Compiler will pack this into a single 256bit word.\r\n    struct AddressData {\r\n        // Realistically, 2**64-1 is more than enough.\r\n        uint64 balance;\r\n        // Keeps track of mint count with minimal overhead for tokenomics.\r\n        uint64 numberMinted;\r\n        // Keeps track of burn count with minimal overhead for tokenomics.\r\n        uint64 numberBurned;\r\n        // For miscellaneous variable(s) pertaining to the address\r\n        // (e.g. number of whitelist mint slots used).\r\n        // If there are multiple variables, please pack them into a uint64.\r\n        uint64 aux;\r\n    }\r\n\r\n    // The tokenId of the next token to be minted.\r\n    uint256 internal _currentIndex;\r\n\r\n    // The number of tokens burned.\r\n    uint256 internal _burnCounter;\r\n\r\n    // Token name\r\n    string private _name;\r\n\r\n    // Token symbol\r\n    string private _symbol;\r\n\r\n    // Mapping from token ID to ownership details\r\n    // An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.\r\n    mapping(uint256 =\u003e TokenOwnership) internal _ownerships;\r\n\r\n    // Mapping owner address to address data\r\n    mapping(address =\u003e AddressData) private _addressData;\r\n\r\n    // Mapping from token ID to approved address\r\n    mapping(uint256 =\u003e address) private _tokenApprovals;\r\n\r\n    // Mapping from owner to operator approvals\r\n    mapping(address =\u003e mapping(address =\u003e bool)) private _operatorApprovals;\r\n\r\n    constructor(string memory name_, string memory symbol_) {\r\n        _name = name_;\r\n        _symbol = symbol_;\r\n        _currentIndex = _startTokenId();\r\n    }\r\n\r\n    /**\r\n     * To change the starting tokenId, please override this function.\r\n     */\r\n    function _startTokenId() internal view virtual returns (uint256) {\r\n        return 0;\r\n    }\r\n\r\n    /**\r\n     * @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.\r\n     */\r\n    function totalSupply() public view returns (uint256) {\r\n        // Counter underflow is impossible as _burnCounter cannot be incremented\r\n        // more than _currentIndex - _startTokenId() times\r\n        unchecked {\r\n            return _currentIndex - _burnCounter - _startTokenId();\r\n        }\r\n    }\r\n\r\n    /**\r\n     * Returns the total amount of tokens minted in the contract.\r\n     */\r\n    function _totalMinted() internal view returns (uint256) {\r\n        // Counter underflow is impossible as _currentIndex does not decrement,\r\n        // and it is initialized to _startTokenId()\r\n        unchecked {\r\n            return _currentIndex - _startTokenId();\r\n        }\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC165-supportsInterface}.\r\n     */\r\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\r\n        return\r\n            interfaceId == type(IERC721).interfaceId ||\r\n            interfaceId == type(IERC721Metadata).interfaceId ||\r\n            super.supportsInterface(interfaceId);\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-balanceOf}.\r\n     */\r\n    function balanceOf(address owner) public view override returns (uint256) {\r\n        if (owner == address(0)) revert BalanceQueryForZeroAddress();\r\n        return uint256(_addressData[owner].balance);\r\n    }\r\n\r\n    /**\r\n     * Returns the number of tokens minted by `owner`.\r\n     */\r\n    function _numberMinted(address owner) internal view returns (uint256) {\r\n        return uint256(_addressData[owner].numberMinted);\r\n    }\r\n\r\n    /**\r\n     * Returns the number of tokens burned by or on behalf of `owner`.\r\n     */\r\n    function _numberBurned(address owner) internal view returns (uint256) {\r\n        return uint256(_addressData[owner].numberBurned);\r\n    }\r\n\r\n    /**\r\n     * Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).\r\n     */\r\n    function _getAux(address owner) internal view returns (uint64) {\r\n        return _addressData[owner].aux;\r\n    }\r\n\r\n    /**\r\n     * Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).\r\n     * If there are multiple variables, please pack them into a uint64.\r\n     */\r\n    function _setAux(address owner, uint64 aux) internal {\r\n        _addressData[owner].aux = aux;\r\n    }\r\n\r\n    /**\r\n     * Gas spent here starts off proportional to the maximum mint batch size.\r\n     * It gradually moves to O(1) as tokens get transferred around in the collection over time.\r\n     */\r\n    function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {\r\n        uint256 curr = tokenId;\r\n\r\n        unchecked {\r\n            if (_startTokenId() \u003c= curr \u0026\u0026 curr \u003c _currentIndex) {\r\n                TokenOwnership memory ownership = _ownerships[curr];\r\n                if (!ownership.burned) {\r\n                    if (ownership.addr != address(0)) {\r\n                        return ownership;\r\n                    }\r\n                    // Invariant:\r\n                    // There will always be an ownership that has an address and is not burned\r\n                    // before an ownership that does not have an address and is not burned.\r\n                    // Hence, curr will not underflow.\r\n                    while (true) {\r\n                        curr--;\r\n                        ownership = _ownerships[curr];\r\n                        if (ownership.addr != address(0)) {\r\n                            return ownership;\r\n                        }\r\n                    }\r\n                }\r\n            }\r\n        }\r\n        revert OwnerQueryForNonexistentToken();\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-ownerOf}.\r\n     */\r\n    function ownerOf(uint256 tokenId) public view override returns (address) {\r\n        return _ownershipOf(tokenId).addr;\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721Metadata-name}.\r\n     */\r\n    function name() public view virtual override returns (string memory) {\r\n        return _name;\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721Metadata-symbol}.\r\n     */\r\n    function symbol() public view virtual override returns (string memory) {\r\n        return _symbol;\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721Metadata-tokenURI}.\r\n     */\r\n    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\r\n        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\r\n\r\n        string memory baseURI = _baseURI();\r\n        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : \u0027\u0027;\r\n    }\r\n\r\n    /**\r\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\r\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\r\n     * by default, can be overriden in child contracts.\r\n     */\r\n    function _baseURI() internal view virtual returns (string memory) {\r\n        return \u0027\u0027;\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-approve}.\r\n     */\r\n    function approve(address to, uint256 tokenId) public override {\r\n        address owner = ERC721A.ownerOf(tokenId);\r\n        if (to == owner) revert ApprovalToCurrentOwner();\r\n\r\n        if (_msgSender() != owner \u0026\u0026 !isApprovedForAll(owner, _msgSender())) {\r\n            revert ApprovalCallerNotOwnerNorApproved();\r\n        }\r\n\r\n        _approve(to, tokenId, owner);\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-getApproved}.\r\n     */\r\n    function getApproved(uint256 tokenId) public view override returns (address) {\r\n        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();\r\n\r\n        return _tokenApprovals[tokenId];\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-setApprovalForAll}.\r\n     */\r\n    function setApprovalForAll(address operator, bool approved) public virtual override {\r\n        if (operator == _msgSender()) revert ApproveToCaller();\r\n\r\n        _operatorApprovals[_msgSender()][operator] = approved;\r\n        emit ApprovalForAll(_msgSender(), operator, approved);\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-isApprovedForAll}.\r\n     */\r\n    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\r\n        return _operatorApprovals[owner][operator];\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-transferFrom}.\r\n     */\r\n    function transferFrom(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId\r\n    ) public virtual override {\r\n        _transfer(from, to, tokenId);\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-safeTransferFrom}.\r\n     */\r\n    function safeTransferFrom(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId\r\n    ) public virtual override {\r\n        safeTransferFrom(from, to, tokenId, \u0027\u0027);\r\n    }\r\n\r\n    /**\r\n     * @dev See {IERC721-safeTransferFrom}.\r\n     */\r\n    function safeTransferFrom(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId,\r\n        bytes memory _data\r\n    ) public virtual override {\r\n        _transfer(from, to, tokenId);\r\n        if (to.isContract() \u0026\u0026 !_checkContractOnERC721Received(from, to, tokenId, _data)) {\r\n            revert TransferToNonERC721ReceiverImplementer();\r\n        }\r\n    }\r\n\r\n    /**\r\n     * @dev Returns whether `tokenId` exists.\r\n     *\r\n     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\r\n     *\r\n     * Tokens start existing when they are minted (`_mint`),\r\n     */\r\n    function _exists(uint256 tokenId) internal view returns (bool) {\r\n        return _startTokenId() \u003c= tokenId \u0026\u0026 tokenId \u003c _currentIndex \u0026\u0026 !_ownerships[tokenId].burned;\r\n    }\r\n\r\n    function _safeMint(address to, uint256 quantity) internal {\r\n        _safeMint(to, quantity, \u0027\u0027);\r\n    }\r\n\r\n    /**\r\n     * @dev Safely mints `quantity` tokens and transfers them to `to`.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\r\n     * - `quantity` must be greater than 0.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function _safeMint(\r\n        address to,\r\n        uint256 quantity,\r\n        bytes memory _data\r\n    ) internal {\r\n        _mint(to, quantity, _data, true);\r\n    }\r\n\r\n    /**\r\n     * @dev Mints `quantity` tokens and transfers them to `to`.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `to` cannot be the zero address.\r\n     * - `quantity` must be greater than 0.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function _mint(\r\n        address to,\r\n        uint256 quantity,\r\n        bytes memory _data,\r\n        bool safe\r\n    ) internal {\r\n        uint256 startTokenId = _currentIndex;\r\n        if (to == address(0)) revert MintToZeroAddress();\r\n        if (quantity == 0) revert MintZeroQuantity();\r\n\r\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\r\n\r\n        // Overflows are incredibly unrealistic.\r\n        // balance or numberMinted overflow if current value of either + quantity \u003e 1.8e19 (2**64) - 1\r\n        // updatedIndex overflows if _currentIndex + quantity \u003e 1.2e77 (2**256) - 1\r\n        unchecked {\r\n            _addressData[to].balance += uint64(quantity);\r\n            _addressData[to].numberMinted += uint64(quantity);\r\n\r\n            _ownerships[startTokenId].addr = to;\r\n            _ownerships[startTokenId].startTimestamp = uint64(block.timestamp);\r\n\r\n            uint256 updatedIndex = startTokenId;\r\n            uint256 end = updatedIndex + quantity;\r\n\r\n            if (safe \u0026\u0026 to.isContract()) {\r\n                do {\r\n                    emit Transfer(address(0), to, updatedIndex);\r\n                    if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {\r\n                        revert TransferToNonERC721ReceiverImplementer();\r\n                    }\r\n                } while (updatedIndex != end);\r\n                // Reentrancy protection\r\n                if (_currentIndex != startTokenId) revert();\r\n            } else {\r\n                do {\r\n                    emit Transfer(address(0), to, updatedIndex++);\r\n                } while (updatedIndex != end);\r\n            }\r\n            _currentIndex = updatedIndex;\r\n        }\r\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\r\n    }\r\n\r\n    /**\r\n     * @dev Transfers `tokenId` from `from` to `to`.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `to` cannot be the zero address.\r\n     * - `tokenId` token must be owned by `from`.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function _transfer(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId\r\n    ) private {\r\n        TokenOwnership memory prevOwnership = _ownershipOf(tokenId);\r\n\r\n        if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();\r\n\r\n        bool isApprovedOrOwner = (_msgSender() == from ||\r\n            isApprovedForAll(from, _msgSender()) ||\r\n            getApproved(tokenId) == _msgSender());\r\n\r\n        if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();\r\n        if (to == address(0)) revert TransferToZeroAddress();\r\n\r\n        _beforeTokenTransfers(from, to, tokenId, 1);\r\n\r\n        // Clear approvals from the previous owner\r\n        _approve(address(0), tokenId, from);\r\n\r\n        // Underflow of the sender\u0027s balance is impossible because we check for\r\n        // ownership above and the recipient\u0027s balance can\u0027t realistically overflow.\r\n        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.\r\n        unchecked {\r\n            _addressData[from].balance -= 1;\r\n            _addressData[to].balance += 1;\r\n\r\n            TokenOwnership storage currSlot = _ownerships[tokenId];\r\n            currSlot.addr = to;\r\n            currSlot.startTimestamp = uint64(block.timestamp);\r\n\r\n            // If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.\r\n            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.\r\n            uint256 nextTokenId = tokenId + 1;\r\n            TokenOwnership storage nextSlot = _ownerships[nextTokenId];\r\n            if (nextSlot.addr == address(0)) {\r\n                // This will suffice for checking _exists(nextTokenId),\r\n                // as a burned slot cannot contain the zero address.\r\n                if (nextTokenId != _currentIndex) {\r\n                    nextSlot.addr = from;\r\n                    nextSlot.startTimestamp = prevOwnership.startTimestamp;\r\n                }\r\n            }\r\n        }\r\n\r\n        emit Transfer(from, to, tokenId);\r\n        _afterTokenTransfers(from, to, tokenId, 1);\r\n    }\r\n\r\n    /**\r\n     * @dev This is equivalent to _burn(tokenId, false)\r\n     */\r\n    function _burn(uint256 tokenId) internal virtual {\r\n        _burn(tokenId, false);\r\n    }\r\n\r\n    /**\r\n     * @dev Destroys `tokenId`.\r\n     * The approval is cleared when the token is burned.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `tokenId` must exist.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\r\n        TokenOwnership memory prevOwnership = _ownershipOf(tokenId);\r\n\r\n        address from = prevOwnership.addr;\r\n\r\n        if (approvalCheck) {\r\n            bool isApprovedOrOwner = (_msgSender() == from ||\r\n                isApprovedForAll(from, _msgSender()) ||\r\n                getApproved(tokenId) == _msgSender());\r\n\r\n            if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();\r\n        }\r\n\r\n        _beforeTokenTransfers(from, address(0), tokenId, 1);\r\n\r\n        // Clear approvals from the previous owner\r\n        _approve(address(0), tokenId, from);\r\n\r\n        // Underflow of the sender\u0027s balance is impossible because we check for\r\n        // ownership above and the recipient\u0027s balance can\u0027t realistically overflow.\r\n        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.\r\n        unchecked {\r\n            AddressData storage addressData = _addressData[from];\r\n            addressData.balance -= 1;\r\n            addressData.numberBurned += 1;\r\n\r\n            // Keep track of who burned the token, and the timestamp of burning.\r\n            TokenOwnership storage currSlot = _ownerships[tokenId];\r\n            currSlot.addr = from;\r\n            currSlot.startTimestamp = uint64(block.timestamp);\r\n            currSlot.burned = true;\r\n\r\n            // If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.\r\n            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.\r\n            uint256 nextTokenId = tokenId + 1;\r\n            TokenOwnership storage nextSlot = _ownerships[nextTokenId];\r\n            if (nextSlot.addr == address(0)) {\r\n                // This will suffice for checking _exists(nextTokenId),\r\n                // as a burned slot cannot contain the zero address.\r\n                if (nextTokenId != _currentIndex) {\r\n                    nextSlot.addr = from;\r\n                    nextSlot.startTimestamp = prevOwnership.startTimestamp;\r\n                }\r\n            }\r\n        }\r\n\r\n        emit Transfer(from, address(0), tokenId);\r\n        _afterTokenTransfers(from, address(0), tokenId, 1);\r\n\r\n        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.\r\n        unchecked {\r\n            _burnCounter++;\r\n        }\r\n    }\r\n\r\n    /**\r\n     * @dev Approve `to` to operate on `tokenId`\r\n     *\r\n     * Emits a {Approval} event.\r\n     */\r\n    function _approve(\r\n        address to,\r\n        uint256 tokenId,\r\n        address owner\r\n    ) private {\r\n        _tokenApprovals[tokenId] = to;\r\n        emit Approval(owner, to, tokenId);\r\n    }\r\n\r\n    /**\r\n     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.\r\n     *\r\n     * @param from address representing the previous owner of the given token ID\r\n     * @param to target address that will receive the tokens\r\n     * @param tokenId uint256 ID of the token to be transferred\r\n     * @param _data bytes optional data to send along with the call\r\n     * @return bool whether the call correctly returned the expected magic value\r\n     */\r\n    function _checkContractOnERC721Received(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId,\r\n        bytes memory _data\r\n    ) private returns (bool) {\r\n        try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {\r\n            return retval == IERC721Receiver(to).onERC721Received.selector;\r\n        } catch (bytes memory reason) {\r\n            if (reason.length == 0) {\r\n                revert TransferToNonERC721ReceiverImplementer();\r\n            } else {\r\n                assembly {\r\n                    revert(add(32, reason), mload(reason))\r\n                }\r\n            }\r\n        }\r\n    }\r\n\r\n    /**\r\n     * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.\r\n     * And also called before burning one token.\r\n     *\r\n     * startTokenId - the first token id to be transferred\r\n     * quantity - the amount to be transferred\r\n     *\r\n     * Calling conditions:\r\n     *\r\n     * - When `from` and `to` are both non-zero, `from`\u0027s `tokenId` will be\r\n     * transferred to `to`.\r\n     * - When `from` is zero, `tokenId` will be minted for `to`.\r\n     * - When `to` is zero, `tokenId` will be burned by `from`.\r\n     * - `from` and `to` are never both zero.\r\n     */\r\n    function _beforeTokenTransfers(\r\n        address from,\r\n        address to,\r\n        uint256 startTokenId,\r\n        uint256 quantity\r\n    ) internal virtual {}\r\n\r\n    /**\r\n     * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes\r\n     * minting.\r\n     * And also called after one token has been burned.\r\n     *\r\n     * startTokenId - the first token id to be transferred\r\n     * quantity - the amount to be transferred\r\n     *\r\n     * Calling conditions:\r\n     *\r\n     * - When `from` and `to` are both non-zero, `from`\u0027s `tokenId` has been\r\n     * transferred to `to`.\r\n     * - When `from` is zero, `tokenId` has been minted for `to`.\r\n     * - When `to` is zero, `tokenId` has been burned by `from`.\r\n     * - `from` and `to` are never both zero.\r\n     */\r\n    function _afterTokenTransfers(\r\n        address from,\r\n        address to,\r\n        uint256 startTokenId,\r\n        uint256 quantity\r\n    ) internal virtual {}\r\n}"},"ERC721AQueryable.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// Creator: Chiru Labs\r\n\r\npragma solidity ^0.8.4;\r\n\r\nimport \u0027./ERC721A.sol\u0027;\r\n\r\nerror InvalidQueryRange();\r\n\r\n/**\r\n * @title ERC721A Queryable\r\n * @dev ERC721A subclass with convenience query functions.\r\n */\r\nabstract contract ERC721AQueryable is ERC721A {\r\n    /**\r\n     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\r\n     *\r\n     * If the `tokenId` is out of bounds:\r\n     *   - `addr` = `address(0)`\r\n     *   - `startTimestamp` = `0`\r\n     *   - `burned` = `false`\r\n     *\r\n     * If the `tokenId` is burned:\r\n     *   - `addr` = `\u003cAddress of owner before token was burned\u003e`\r\n     *   - `startTimestamp` = `\u003cTimestamp when token was burned\u003e`\r\n     *   - `burned = `true`\r\n     *\r\n     * Otherwise:\r\n     *   - `addr` = `\u003cAddress of owner\u003e`\r\n     *   - `startTimestamp` = `\u003cTimestamp of start of ownership\u003e`\r\n     *   - `burned = `false`\r\n     */\r\n    function explicitOwnershipOf(uint256 tokenId) public view returns (TokenOwnership memory) {\r\n        TokenOwnership memory ownership;\r\n        if (tokenId \u003c _startTokenId() || tokenId \u003e= _currentIndex) {\r\n            return ownership;\r\n        }\r\n        ownership = _ownerships[tokenId];\r\n        if (ownership.burned) {\r\n            return ownership;\r\n        }\r\n        return _ownershipOf(tokenId);\r\n    }\r\n\r\n    /**\r\n     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\r\n     * See {ERC721AQueryable-explicitOwnershipOf}\r\n     */\r\n    function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory) {\r\n        unchecked {\r\n            uint256 tokenIdsLength = tokenIds.length;\r\n            TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);\r\n            for (uint256 i; i != tokenIdsLength; ++i) {\r\n                ownerships[i] = explicitOwnershipOf(tokenIds[i]);\r\n            }\r\n            return ownerships;\r\n        }\r\n    }\r\n\r\n    /**\r\n     * @dev Returns an array of token IDs owned by `owner`,\r\n     * in the range [`start`, `stop`)\r\n     * (i.e. `start \u003c= tokenId \u003c stop`).\r\n     *\r\n     * This function allows for tokens to be queried if the collection\r\n     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `start` \u003c `stop`\r\n     */\r\n    function tokensOfOwnerIn(\r\n        address owner,\r\n        uint256 start,\r\n        uint256 stop\r\n    ) external view returns (uint256[] memory) {\r\n        unchecked {\r\n            if (start \u003e= stop) revert InvalidQueryRange();\r\n            uint256 tokenIdsIdx;\r\n            uint256 stopLimit = _currentIndex;\r\n            // Set `start = max(start, _startTokenId())`.\r\n            if (start \u003c _startTokenId()) {\r\n                start = _startTokenId();\r\n            }\r\n            // Set `stop = min(stop, _currentIndex)`.\r\n            if (stop \u003e stopLimit) {\r\n                stop = stopLimit;\r\n            }\r\n            uint256 tokenIdsMaxLength = balanceOf(owner);\r\n            // Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,\r\n            // to cater for cases where `balanceOf(owner)` is too big.\r\n            if (start \u003c stop) {\r\n                uint256 rangeLength = stop - start;\r\n                if (rangeLength \u003c tokenIdsMaxLength) {\r\n                    tokenIdsMaxLength = rangeLength;\r\n                }\r\n            } else {\r\n                tokenIdsMaxLength = 0;\r\n            }\r\n            uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);\r\n            if (tokenIdsMaxLength == 0) {\r\n                return tokenIds;\r\n            }\r\n            // We need to call `explicitOwnershipOf(start)`,\r\n            // because the slot at `start` may not be initialized.\r\n            TokenOwnership memory ownership = explicitOwnershipOf(start);\r\n            address currOwnershipAddr;\r\n            // If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.\r\n            // `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.\r\n            if (!ownership.burned) {\r\n                currOwnershipAddr = ownership.addr;\r\n            }\r\n            for (uint256 i = start; i != stop \u0026\u0026 tokenIdsIdx != tokenIdsMaxLength; ++i) {\r\n                ownership = _ownerships[i];\r\n                if (ownership.burned) {\r\n                    continue;\r\n                }\r\n                if (ownership.addr != address(0)) {\r\n                    currOwnershipAddr = ownership.addr;\r\n                }\r\n                if (currOwnershipAddr == owner) {\r\n                    tokenIds[tokenIdsIdx++] = i;\r\n                }\r\n            }\r\n            // Downsize the array to fit.\r\n            assembly {\r\n                mstore(tokenIds, tokenIdsIdx)\r\n            }\r\n            return tokenIds;\r\n        }\r\n    }\r\n\r\n    /**\r\n     * @dev Returns an array of token IDs owned by `owner`.\r\n     *\r\n     * This function scans the ownership mapping and is O(totalSupply) in complexity.\r\n     * It is meant to be called off-chain.\r\n     *\r\n     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\r\n     * multiple smaller scans if the collection is large enough to cause\r\n     * an out-of-gas error (10K pfp collections should be fine).\r\n     */\r\n    function tokensOfOwner(address owner) external view returns (uint256[] memory) {\r\n        unchecked {\r\n            uint256 tokenIdsIdx;\r\n            address currOwnershipAddr;\r\n            uint256 tokenIdsLength = balanceOf(owner);\r\n            uint256[] memory tokenIds = new uint256[](tokenIdsLength);\r\n            TokenOwnership memory ownership;\r\n            for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {\r\n                ownership = _ownerships[i];\r\n                if (ownership.burned) {\r\n                    continue;\r\n                }\r\n                if (ownership.addr != address(0)) {\r\n                    currOwnershipAddr = ownership.addr;\r\n                }\r\n                if (currOwnershipAddr == owner) {\r\n                    tokenIds[tokenIdsIdx++] = i;\r\n                }\r\n            }\r\n            return tokenIds;\r\n        }\r\n    }\r\n}"},"IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\n/**\r\n * @dev Interface of the ERC165 standard, as defined in the\r\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\r\n *\r\n * Implementers can declare support of contract interfaces, which can then be\r\n * queried by others ({ERC165Checker}).\r\n *\r\n * For an implementation, see {ERC165}.\r\n */\r\ninterface IERC165 {\r\n    /**\r\n     * @dev Returns true if this contract implements the interface defined by\r\n     * `interfaceId`. See the corresponding\r\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\r\n     * to learn more about how these ids are created.\r\n     *\r\n     * This function call must use less than 30 000 gas.\r\n     */\r\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\r\n}"},"IERC2981.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/IERC2981.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\nimport \"./IERC165.sol\";\r\n\r\n/**\r\n * @dev Interface for the NFT Royalty Standard.\r\n *\r\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\r\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\r\n *\r\n * _Available since v4.5._\r\n */\r\ninterface IERC2981 is IERC165 {\r\n    /**\r\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\r\n     * exchange. The royalty amount is denominated and should be payed in that same unit of exchange.\r\n     */\r\n    function royaltyInfo(uint256 tokenId, uint256 salePrice)\r\n        external\r\n        view\r\n        returns (address receiver, uint256 royaltyAmount);\r\n}"},"IERC721.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\nimport \"./IERC165.sol\";\r\n\r\n/**\r\n * @dev Required interface of an ERC721 compliant contract.\r\n */\r\ninterface IERC721 is IERC165 {\r\n    /**\r\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\r\n     */\r\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\r\n\r\n    /**\r\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\r\n     */\r\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\r\n\r\n    /**\r\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\r\n     */\r\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\r\n\r\n    /**\r\n     * @dev Returns the number of tokens in ``owner``\u0027s account.\r\n     */\r\n    function balanceOf(address owner) external view returns (uint256 balance);\r\n\r\n    /**\r\n     * @dev Returns the owner of the `tokenId` token.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `tokenId` must exist.\r\n     */\r\n    function ownerOf(uint256 tokenId) external view returns (address owner);\r\n\r\n    /**\r\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\r\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `from` cannot be the zero address.\r\n     * - `to` cannot be the zero address.\r\n     * - `tokenId` token must exist and be owned by `from`.\r\n     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.\r\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function safeTransferFrom(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId\r\n    ) external;\r\n\r\n    /**\r\n     * @dev Transfers `tokenId` token from `from` to `to`.\r\n     *\r\n     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `from` cannot be the zero address.\r\n     * - `to` cannot be the zero address.\r\n     * - `tokenId` token must be owned by `from`.\r\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function transferFrom(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId\r\n    ) external;\r\n\r\n    /**\r\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\r\n     * The approval is cleared when the token is transferred.\r\n     *\r\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - The caller must own the token or be an approved operator.\r\n     * - `tokenId` must exist.\r\n     *\r\n     * Emits an {Approval} event.\r\n     */\r\n    function approve(address to, uint256 tokenId) external;\r\n\r\n    /**\r\n     * @dev Returns the account approved for `tokenId` token.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `tokenId` must exist.\r\n     */\r\n    function getApproved(uint256 tokenId) external view returns (address operator);\r\n\r\n    /**\r\n     * @dev Approve or remove `operator` as an operator for the caller.\r\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - The `operator` cannot be the caller.\r\n     *\r\n     * Emits an {ApprovalForAll} event.\r\n     */\r\n    function setApprovalForAll(address operator, bool _approved) external;\r\n\r\n    /**\r\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\r\n     *\r\n     * See {setApprovalForAll}\r\n     */\r\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\r\n\r\n    /**\r\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\r\n     *\r\n     * Requirements:\r\n     *\r\n     * - `from` cannot be the zero address.\r\n     * - `to` cannot be the zero address.\r\n     * - `tokenId` token must exist and be owned by `from`.\r\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\r\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\r\n     *\r\n     * Emits a {Transfer} event.\r\n     */\r\n    function safeTransferFrom(\r\n        address from,\r\n        address to,\r\n        uint256 tokenId,\r\n        bytes calldata data\r\n    ) external;\r\n}"},"IERC721Metadata.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\nimport \"./IERC721.sol\";\r\n\r\n/**\r\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\r\n * @dev See https://eips.ethereum.org/EIPS/eip-721\r\n */\r\ninterface IERC721Metadata is IERC721 {\r\n    /**\r\n     * @dev Returns the token collection name.\r\n     */\r\n    function name() external view returns (string memory);\r\n\r\n    /**\r\n     * @dev Returns the token collection symbol.\r\n     */\r\n    function symbol() external view returns (string memory);\r\n\r\n    /**\r\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\r\n     */\r\n    function tokenURI(uint256 tokenId) external view returns (string memory);\r\n}"},"IERC721Receiver.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\n/**\r\n * @title ERC721 token receiver interface\r\n * @dev Interface for any contract that wants to support safeTransfers\r\n * from ERC721 asset contracts.\r\n */\r\ninterface IERC721Receiver {\r\n    /**\r\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\r\n     * by `operator` from `from`, this function is called.\r\n     *\r\n     * It must return its Solidity selector to confirm the token transfer.\r\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.\r\n     *\r\n     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.\r\n     */\r\n    function onERC721Received(\r\n        address operator,\r\n        address from,\r\n        uint256 tokenId,\r\n        bytes calldata data\r\n    ) external returns (bytes4);\r\n}"},"Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\nimport \"./Context.sol\";\r\n\r\n/**\r\n * @dev Contract module which provides a basic access control mechanism, where\r\n * there is an account (an owner) that can be granted exclusive access to\r\n * specific functions.\r\n *\r\n * By default, the owner account will be the one that deploys the contract. This\r\n * can later be changed with {transferOwnership}.\r\n *\r\n * This module is used through inheritance. It will make available the modifier\r\n * `onlyOwner`, which can be applied to your functions to restrict their use to\r\n * the owner.\r\n */\r\nabstract contract Ownable is Context {\r\n    address private _owner;\r\n\r\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\r\n\r\n    /**\r\n     * @dev Initializes the contract setting the deployer as the initial owner.\r\n     */\r\n    constructor() {\r\n        _transferOwnership(_msgSender());\r\n    }\r\n\r\n    /**\r\n     * @dev Returns the address of the current owner.\r\n     */\r\n    function owner() public view virtual returns (address) {\r\n        return _owner;\r\n    }\r\n\r\n    /**\r\n     * @dev Throws if called by any account other than the owner.\r\n     */\r\n    modifier onlyOwner() {\r\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\r\n        _;\r\n    }\r\n\r\n    /**\r\n     * @dev Leaves the contract without owner. It will not be possible to call\r\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\r\n     *\r\n     * NOTE: Renouncing ownership will leave the contract without an owner,\r\n     * thereby removing any functionality that is only available to the owner.\r\n     */\r\n    function renounceOwnership() public virtual onlyOwner {\r\n        _transferOwnership(address(0));\r\n    }\r\n\r\n    /**\r\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\r\n     * Can only be called by the current owner.\r\n     */\r\n    function transferOwnership(address newOwner) public virtual onlyOwner {\r\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\r\n        _transferOwnership(newOwner);\r\n    }\r\n\r\n    /**\r\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\r\n     * Internal function without access restriction.\r\n     */\r\n    function _transferOwnership(address newOwner) internal virtual {\r\n        address oldOwner = _owner;\r\n        _owner = newOwner;\r\n        emit OwnershipTransferred(oldOwner, newOwner);\r\n    }\r\n}"},"rubbishbeast.sol":{"content":"// SPDX-License-Identifier: MIT\r\npragma solidity ^0.8.9;\r\n\r\nimport \"./Ownable.sol\";\r\nimport \"./ERC2981.sol\";\r\nimport \"./Address.sol\";\r\nimport \"./Strings.sol\";\r\nimport \"./ERC721AQueryable.sol\";\r\n\r\nenum Stage {\r\n    NotStarted,\r\n    RubbishClaim,\r\n    Sale\r\n}\r\n\r\ninterface IRubbishCoin {\r\n    function holderClaim(address holder, uint256 amount) external;\r\n}\r\n\r\ncontract RubbishBeast is ERC2981, ERC721AQueryable, Ownable {\r\n    using Address for address payable;\r\n    using Strings for uint256;\r\n\r\n    address public constant BLACKHOLE = 0x000000000000000000000000000000000000dEaD;\r\n\r\n    IERC721 public immutable _rubbish;\r\n    IRubbishCoin public immutable _rubbishCoin;\r\n    uint256 public immutable _rubbishCoinPerPair;\r\n    uint256 public immutable _price;\r\n    uint32 public immutable _maxSupply;\r\n    uint32 public immutable _holderSupply;\r\n    uint32 public immutable _teamSupply;\r\n    uint32 public immutable _walletLimit;\r\n\r\n    uint32 public _teamMinted;\r\n    uint32 public _holderClaimed;\r\n    string public _metadataURI = \"https://gateway.pinata.cloud/ipfs/QmeSiyq5HeFfy7vwJVaRo3HaNBZ4BvyZnu1EsUAWTjG64R/\";\r\n    Stage public _stage = Stage.NotStarted;\r\n\r\n    struct Status {\r\n        // config\r\n        uint256 price;\r\n        uint256 rubbishCoinPerPair;\r\n        uint32 maxSupply;\r\n        uint32 publicSupply;\r\n        uint32 walletLimit;\r\n\r\n        // state\r\n        uint32 publicMinted;\r\n        uint32 userMinted;\r\n        bool soldout;\r\n        Stage stage;\r\n    }\r\n\r\n    constructor(\r\n        address rubbish,\r\n        address rubbishCoin,\r\n        uint256 rubbishCoinPerPair,\r\n        uint256 price,\r\n        uint32 maxSupply,\r\n        uint32 holderSupply,\r\n        uint32 teamSupply,\r\n        uint32 walletLimit\r\n    ) ERC721A(\"RubbishBeast\", \"RB\") {\r\n        require(rubbish != address(0));\r\n        require(rubbishCoin != address(0));\r\n        require(maxSupply \u003e= holderSupply + teamSupply);\r\n\r\n        _rubbish = IERC721(rubbish);\r\n        _rubbishCoin = IRubbishCoin(rubbishCoin);\r\n        _rubbishCoinPerPair = rubbishCoinPerPair;\r\n        _price = price;\r\n        _maxSupply = maxSupply;\r\n        _holderSupply = holderSupply;\r\n        _teamSupply = teamSupply;\r\n        _walletLimit = walletLimit;\r\n\r\n        setFeeNumerator(750);\r\n    }\r\n\r\n    function rubbishClaim(uint256[] memory tokenIds) external {\r\n        require(_stage == Stage.RubbishClaim, \"RubbishBeast: Claiming is not started yet\");\r\n        require(tokenIds.length \u003e 0 \u0026\u0026 tokenIds.length % 4 == 0, \"RubbishBeast: You must provide token pairs\");\r\n        uint32 pairs = uint32(tokenIds.length / 4);\r\n        require(pairs + _holderClaimed \u003c= _holderSupply, \"RubbishBeast: Exceed holder supply\");\r\n\r\n        for (uint256 i = 0; i \u003c tokenIds.length; ) {\r\n            _rubbish.transferFrom(msg.sender, BLACKHOLE, tokenIds[i]);\r\n            unchecked {\r\n                i++;\r\n            }\r\n        }\r\n\r\n        _setAux(msg.sender, _getAux(msg.sender) + pairs);\r\n        _rubbishCoin.holderClaim(msg.sender, pairs * _rubbishCoinPerPair);\r\n        _safeMint(msg.sender, pairs);\r\n    }\r\n\r\n    function mint(uint32 amount) external payable {\r\n        require(_stage == Stage.Sale, \"ShitBeast: Sale is not started\");\r\n        require(amount + _publicMinted() \u003c= _publicSupply(), \"ShitBeast: Exceed max supply\");\r\n        require(amount + uint32(_numberMinted(msg.sender)) - uint32(_getAux(msg.sender)) \u003c= _walletLimit, \"ShitBeast: Exceed wallet limit\");\r\n        require(msg.value == amount * _price, \"ShitBeast: Insufficient fund\");\r\n\r\n        _safeMint(msg.sender, amount);\r\n    }\r\n\r\n    function _publicMinted() public view returns (uint32) {\r\n        return uint32(_totalMinted()) - _teamMinted;\r\n    }\r\n\r\n    function _publicSupply() public view returns (uint32) {\r\n        return _maxSupply - _teamSupply;\r\n    }\r\n\r\n    function _status(address minter) external view returns (Status memory) {\r\n        uint32 publicSupply = _publicSupply();\r\n        uint32 publicMinted = _publicMinted();\r\n\r\n        return Status({\r\n            // config\r\n            price: _price,\r\n            maxSupply: _maxSupply,\r\n            publicSupply: publicSupply,\r\n            rubbishCoinPerPair: _rubbishCoinPerPair,\r\n            walletLimit: _walletLimit,\r\n\r\n            // state\r\n            publicMinted: publicMinted,\r\n            soldout: publicMinted \u003e= publicSupply,\r\n            userMinted: uint32(_numberMinted(minter)) - uint32(_getAux(msg.sender)),\r\n            stage: _stage\r\n        });\r\n    }\r\n\r\n    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\r\n        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\r\n\r\n        string memory baseURI = _metadataURI;\r\n        return string(abi.encodePacked(baseURI, tokenId.toString(), \".json\"));\r\n    }\r\n\r\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC2981, ERC721A) returns (bool) {\r\n        return\r\n            interfaceId == type(IERC2981).interfaceId ||\r\n            interfaceId == type(IERC721).interfaceId ||\r\n            super.supportsInterface(interfaceId);\r\n    }\r\n\r\n    function devMint(address to, uint32 amount) external onlyOwner {\r\n        _teamMinted += amount;\r\n        require(_teamMinted \u003c= _teamSupply, \"ShitBeast: Exceed max supply\");\r\n        _safeMint(to, amount);\r\n    }\r\n\r\n    function setFeeNumerator(uint96 feeNumerator) public onlyOwner {\r\n        _setDefaultRoyalty(owner(), feeNumerator);\r\n    }\r\n\r\n    function setStage(Stage stage) external onlyOwner {\r\n        _stage = stage;\r\n    }\r\n\r\n    function setMetadataURI(string memory uri) external onlyOwner {\r\n        _metadataURI = uri;\r\n    }\r\n\r\n    function withdraw() external onlyOwner {\r\n        payable(msg.sender).sendValue(address(this).balance);\r\n    }\r\n}"},"Strings.sol":{"content":"// SPDX-License-Identifier: MIT\r\n// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)\r\n\r\npragma solidity ^0.8.0;\r\n\r\n/**\r\n * @dev String operations.\r\n */\r\nlibrary Strings {\r\n    bytes16 private constant _HEX_SYMBOLS = \"0123456789abcdef\";\r\n\r\n    /**\r\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\r\n     */\r\n    function toString(uint256 value) internal pure returns (string memory) {\r\n        // Inspired by OraclizeAPI\u0027s implementation - MIT licence\r\n        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol\r\n\r\n        if (value == 0) {\r\n            return \"0\";\r\n        }\r\n        uint256 temp = value;\r\n        uint256 digits;\r\n        while (temp != 0) {\r\n            digits++;\r\n            temp /= 10;\r\n        }\r\n        bytes memory buffer = new bytes(digits);\r\n        while (value != 0) {\r\n            digits -= 1;\r\n            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));\r\n            value /= 10;\r\n        }\r\n        return string(buffer);\r\n    }\r\n\r\n    /**\r\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\r\n     */\r\n    function toHexString(uint256 value) internal pure returns (string memory) {\r\n        if (value == 0) {\r\n            return \"0x00\";\r\n        }\r\n        uint256 temp = value;\r\n        uint256 length = 0;\r\n        while (temp != 0) {\r\n            length++;\r\n            temp \u003e\u003e= 8;\r\n        }\r\n        return toHexString(value, length);\r\n    }\r\n\r\n    /**\r\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\r\n     */\r\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\r\n        bytes memory buffer = new bytes(2 * length + 2);\r\n        buffer[0] = \"0\";\r\n        buffer[1] = \"x\";\r\n        for (uint256 i = 2 * length + 1; i \u003e 1; --i) {\r\n            buffer[i] = _HEX_SYMBOLS[value \u0026 0xf];\r\n            value \u003e\u003e= 4;\r\n        }\r\n        require(value == 0, \"Strings: hex length insufficient\");\r\n        return string(buffer);\r\n    }\r\n}"}}