// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;

/// @title IProxy - Helper interface to access masterCopy of the Proxy on-chain
/// @author Richard Meissner - <[email protected]>
interface IProxy {
    function masterCopy() external view returns (address);
}

/// @title GnosisSafeProxy - Generic proxy contract allows to execute all transactions applying the code of a master contract.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafeProxy {
    // singleton always needs to be first declared variable, to ensure that it is at the same location in the contracts to which calls are delegated.
    // To reduce deployment costs this variable is internal and needs to be retrieved via `getStorageAt`
    address internal singleton;

    /// @dev Constructor function sets address of singleton contract.
    /// @param _singleton Singleton address.
    constructor(address _singleton) {
        require(_singleton != address(0), "Invalid singleton address provided");
        singleton = _singleton;
    }

    /// @dev Fallback function forwards all transactions and returns all received return data.
    fallback() external payable {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let _singleton := and(sload(0), 0xffffffffffffffffffffffffffffffffffffffff)
            // 0xa619486e == keccak("masterCopy()"). The value is right padded to 32-bytes with 0s
            if eq(calldataload(0), 0xa619486e00000000000000000000000000000000000000000000000000000000) {
                mstore(0, _singleton)
                return(0, 0x20)
            }
            calldatacopy(0, 0, calldatasize())
            let success := delegatecall(gas(), _singleton, 0, calldatasize(), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if eq(success, 0) {
                revert(0, returndatasize())
            }
            return(0, returndatasize())
        }
    }
}

/// @title Proxy Factory - Allows to create new proxy contact and execute a message call to the new proxy within one transaction.
/// @author Stefan George - <[email protected]>
contract GnosisSafeProxyFactory {
    event ProxyCreation(GnosisSafeProxy proxy, address singleton);

    /// @dev Allows to create new proxy contact and execute a message call to the new proxy within one transaction.
    /// @param singleton Address of singleton contract.
    /// @param data Payload for message call sent to new proxy contract.
    function createProxy(address singleton, bytes memory data) public returns (GnosisSafeProxy proxy) {
        proxy = new GnosisSafeProxy(singleton);
        if (data.length > 0)
            // solhint-disable-next-line no-inline-assembly
            assembly {
                if eq(call(gas(), proxy, 0, add(data, 0x20), mload(data), 0, 0), 0) {
                    revert(0, 0)
                }
            }
        emit ProxyCreation(proxy, singleton);
    }

    /// @dev Allows to retrieve the runtime code of a deployed Proxy. This can be used to check that the expected Proxy was deployed.
    function proxyRuntimeCode() public pure returns (bytes memory) {
        return type(GnosisSafeProxy).runtimeCode;
    }

    /// @dev Allows to retrieve the creation code used for the Proxy deployment. With this it is easily possible to calculate predicted address.
    function proxyCreationCode() public pure returns (bytes memory) {
        return type(GnosisSafeProxy).creationCode;
    }

    /// @dev Allows to create new proxy contact using CREATE2 but it doesn't run the initializer.
    ///      This method is only meant as an utility to be called from other methods
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    function deployProxyWithNonce(
        address _singleton,
        bytes memory initializer,
        uint256 saltNonce
    ) internal returns (GnosisSafeProxy proxy) {
        // If the initializer changes the proxy address should change too. Hashing the initializer data is cheaper than just concatinating it
        bytes32 salt = keccak256(abi.encodePacked(keccak256(initializer), saltNonce));
        bytes memory deploymentData = abi.encodePacked(type(GnosisSafeProxy).creationCode, uint256(uint160(_singleton)));
        // solhint-disable-next-line no-inline-assembly
        assembly {
            proxy := create2(0x0, add(0x20, deploymentData), mload(deploymentData), salt)
        }
        require(address(proxy) != address(0), "Create2 call failed");
    }

    /// @dev Allows to create new proxy contact and execute a message call to the new proxy within one transaction.
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    function createProxyWithNonce(
        address _singleton,
        bytes memory initializer,
        uint256 saltNonce
    ) public returns (GnosisSafeProxy proxy) {
        proxy = deployProxyWithNonce(_singleton, initializer, saltNonce);
        if (initializer.length > 0)
            // solhint-disable-next-line no-inline-assembly
            assembly {
                if eq(call(gas(), proxy, 0, add(initializer, 0x20), mload(initializer), 0, 0), 0) {
                    revert(0, 0)
                }
            }
        emit ProxyCreation(proxy, _singleton);
    }

    /// @dev Allows to create new proxy contact, execute a message call to the new proxy and call a specified callback within one transaction
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    /// @param callback Callback that will be invoced after the new proxy contract has been successfully deployed and initialized.
    function createProxyWithCallback(
        address _singleton,
        bytes memory initializer,
        uint256 saltNonce,
        IProxyCreationCallback callback
    ) public returns (GnosisSafeProxy proxy) {
        uint256 saltNonceWithCallback = uint256(keccak256(abi.encodePacked(saltNonce, callback)));
        proxy = createProxyWithNonce(_singleton, initializer, saltNonceWithCallback);
        if (address(callback) != address(0)) callback.proxyCreated(proxy, _singleton, initializer, saltNonce);
    }

    /// @dev Allows to get the address for a new proxy contact created via `createProxyWithNonce`
    ///      This method is only meant for address calculation purpose when you use an initializer that would revert,
    ///      therefore the response is returned with a revert. When calling this method set `from` to the address of the proxy factory.
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    function calculateCreateProxyWithNonceAddress(
        address _singleton,
        bytes calldata initializer,
        uint256 saltNonce
    ) external returns (GnosisSafeProxy proxy) {
        proxy = deployProxyWithNonce(_singleton, initializer, saltNonce);
        revert(string(abi.encodePacked(proxy)));
    }
}

interface IProxyCreationCallback {
    function proxyCreated(
        GnosisSafeProxy proxy,
        address _singleton,
        bytes calldata initializer,
        uint256 saltNonce
    ) external;
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./base/ModuleManager.sol";
import "./base/OwnerManager.sol";
import "./base/FallbackManager.sol";
import "./base/GuardManager.sol";
import "./common/EtherPaymentFallback.sol";
import "./common/Singleton.sol";
import "./common/SignatureDecoder.sol";
import "./common/SecuredTokenTransfer.sol";
import "./common/StorageAccessible.sol";
import "./interfaces/ISignatureValidator.sol";
import "./external/GnosisSafeMath.sol";
/// @title Gnosis Safe - A multisignature wallet with support for confirmations using signed messages based on ERC191.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafe is
    EtherPaymentFallback,
    Singleton,
    ModuleManager,
    OwnerManager,
    SignatureDecoder,
    SecuredTokenTransfer,
    ISignatureValidatorConstants,
    FallbackManager,
    StorageAccessible,
    GuardManager
{
    using GnosisSafeMath for uint256;
    string public constant VERSION = "1.3.0";
    // keccak256(
    //     "EIP712Domain(uint256 chainId,address verifyingContract)"
    // );
    bytes32 private constant DOMAIN_SEPARATOR_TYPEHASH = 0x47e79534a245952e8b16893a336b85a3d9ea9fa8c573f3d803afb92a79469218;
    // keccak256(
    //     "SafeTx(address to,uint256 value,bytes data,uint8 operation,uint256 safeTxGas,uint256 baseGas,uint256 gasPrice,address gasToken,address refundReceiver,uint256 nonce)"
    // );
    bytes32 private constant SAFE_TX_TYPEHASH = 0xbb8310d486368db6bd6f849402fdd73ad53d316b5a4b2644ad6efe0f941286d8;
    event SafeSetup(address indexed initiator, address[] owners, uint256 threshold, address initializer, address fallbackHandler);
    event ApproveHash(bytes32 indexed approvedHash, address indexed owner);
    event SignMsg(bytes32 indexed msgHash);
    event ExecutionFailure(bytes32 txHash, uint256 payment);
    event ExecutionSuccess(bytes32 txHash, uint256 payment);
    uint256 public nonce;
    bytes32 private _deprecatedDomainSeparator;
    // Mapping to keep track of all message hashes that have been approve by ALL REQUIRED owners
    mapping(bytes32 => uint256) public signedMessages;
    // Mapping to keep track of all hashes (message or transaction) that have been approve by ANY owners
    mapping(address => mapping(bytes32 => uint256)) public approvedHashes;
    // This constructor ensures that this contract can only be used as a master copy for Proxy contracts
    constructor() {
        // By setting the threshold it is not possible to call setup anymore,
        // so we create a Safe with 0 owners and threshold 1.
        // This is an unusable Safe, perfect for the singleton
        threshold = 1;
    }
    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    /// @param to Contract address for optional delegate call.
    /// @param data Data payload for optional delegate call.
    /// @param fallbackHandler Handler for fallback calls to this contract
    /// @param paymentToken Token that should be used for the payment (0 is ETH)
    /// @param payment Value that should be paid
    /// @param paymentReceiver Adddress that should receive the payment (or 0 if tx.origin)
    function setup(
        address[] calldata _owners,
        uint256 _threshold,
        address to,
        bytes calldata data,
        address fallbackHandler,
        address paymentToken,
        uint256 payment,
        address payable paymentReceiver
    ) external {
        // setupOwners checks if the Threshold is already set, therefore preventing that this method is called twice
        setupOwners(_owners, _threshold);
        if (fallbackHandler != address(0)) internalSetFallbackHandler(fallbackHandler);
        // As setupOwners can only be called if the contract has not been initialized we don't need a check for setupModules
        setupModules(to, data);
        if (payment > 0) {
            // To avoid running into issues with EIP-170 we reuse the handlePayment function (to avoid adjusting code of that has been verified we do not adjust the method itself)
            // baseGas = 0, gasPrice = 1 and gas = payment => amount = (payment + 0) * 1 = payment
            handlePayment(payment, 0, 1, paymentToken, paymentReceiver);
        }
        emit SafeSetup(msg.sender, _owners, _threshold, to, fallbackHandler);
    }
    /// @dev Allows to execute a Safe transaction confirmed by required number of owners and then pays the account that submitted the transaction.
    ///      Note: The fees are always transferred, even if the user transaction fails.
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @param safeTxGas Gas that should be used for the Safe transaction.
    /// @param baseGas Gas costs that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Gas price that should be used for the payment calculation.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param signatures Packed signature data ({bytes32 r}{bytes32 s}{uint8 v})
    function execTransaction(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures
    ) public payable virtual returns (bool success) {
        bytes32 txHash;
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            bytes memory txHashData =
                encodeTransactionData(
                    // Transaction info
                    to,
                    value,
                    data,
                    operation,
                    safeTxGas,
                    // Payment info
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    // Signature info
                    nonce
                );
            // Increase nonce and execute transaction.
            nonce++;
            txHash = keccak256(txHashData);
            checkSignatures(txHash, txHashData, signatures);
        }
        address guard = getGuard();
        {
            if (guard != address(0)) {
                Guard(guard).checkTransaction(
                    // Transaction info
                    to,
                    value,
                    data,
                    operation,
                    safeTxGas,
                    // Payment info
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    // Signature info
                    signatures,
                    msg.sender
                );
            }
        }
        // We require some gas to emit the events (at least 2500) after the execution and some to perform code until the execution (500)
        // We also include the 1/64 in the check that is not send along with a call to counteract potential shortings because of EIP-150
        require(gasleft() >= ((safeTxGas * 64) / 63).max(safeTxGas + 2500) + 500, "GS010");
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            uint256 gasUsed = gasleft();
            // If the gasPrice is 0 we assume that nearly all available gas can be used (it is always more than safeTxGas)
            // We only substract 2500 (compared to the 3000 before) to ensure that the amount passed is still higher than safeTxGas
            success = execute(to, value, data, operation, gasPrice == 0 ? (gasleft() - 2500) : safeTxGas);
            gasUsed = gasUsed.sub(gasleft());
            // If no safeTxGas and no gasPrice was set (e.g. both are 0), then the internal tx is required to be successful
            // This makes it possible to use `estimateGas` without issues, as it searches for the minimum gas where the tx doesn't revert
            require(success || safeTxGas != 0 || gasPrice != 0, "GS013");
            // We transfer the calculated tx costs to the tx.origin to avoid sending it to intermediate contracts that have made calls
            uint256 payment = 0;
            if (gasPrice > 0) {
                payment = handlePayment(gasUsed, baseGas, gasPrice, gasToken, refundReceiver);
            }
            if (success) emit ExecutionSuccess(txHash, payment);
            else emit ExecutionFailure(txHash, payment);
        }
        {
            if (guard != address(0)) {
                Guard(guard).checkAfterExecution(txHash, success);
            }
        }
    }
    function handlePayment(
        uint256 gasUsed,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver
    ) private returns (uint256 payment) {
        // solhint-disable-next-line avoid-tx-origin
        address payable receiver = refundReceiver == address(0) ? payable(tx.origin) : refundReceiver;
        if (gasToken == address(0)) {
            // For ETH we will only adjust the gas price to not be higher than the actual used gas price
            payment = gasUsed.add(baseGas).mul(gasPrice < tx.gasprice ? gasPrice : tx.gasprice);
            require(receiver.send(payment), "GS011");
        } else {
            payment = gasUsed.add(baseGas).mul(gasPrice);
            require(transferToken(gasToken, receiver, payment), "GS012");
        }
    }
    /**
     * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
     * @param dataHash Hash of the data (could be either a message hash or transaction hash)
     * @param data That should be signed (this is passed to an external validator contract)
     * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
     */
    function checkSignatures(
        bytes32 dataHash,
        bytes memory data,
        bytes memory signatures
    ) public view {
        // Load threshold to avoid multiple storage loads
        uint256 _threshold = threshold;
        // Check that a threshold is set
        require(_threshold > 0, "GS001");
        checkNSignatures(dataHash, data, signatures, _threshold);
    }
    /**
     * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
     * @param dataHash Hash of the data (could be either a message hash or transaction hash)
     * @param data That should be signed (this is passed to an external validator contract)
     * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
     * @param requiredSignatures Amount of required valid signatures.
     */
    function checkNSignatures(
        bytes32 dataHash,
        bytes memory data,
        bytes memory signatures,
        uint256 requiredSignatures
    ) public view {
        // Check that the provided signature data is not too short
        require(signatures.length >= requiredSignatures.mul(65), "GS020");
        // There cannot be an owner with address 0.
        address lastOwner = address(0);
        address currentOwner;
        uint8 v;
        bytes32 r;
        bytes32 s;
        uint256 i;
        for (i = 0; i < requiredSignatures; i++) {
            (v, r, s) = signatureSplit(signatures, i);
            if (v == 0) {
                // If v is 0 then it is a contract signature
                // When handling contract signatures the address of the contract is encoded into r
                currentOwner = address(uint160(uint256(r)));
                // Check that signature data pointer (s) is not pointing inside the static part of the signatures bytes
                // This check is not completely accurate, since it is possible that more signatures than the threshold are send.
                // Here we only check that the pointer is not pointing inside the part that is being processed
                require(uint256(s) >= requiredSignatures.mul(65), "GS021");
                // Check that signature data pointer (s) is in bounds (points to the length of data -> 32 bytes)
                require(uint256(s).add(32) <= signatures.length, "GS022");
                // Check if the contract signature is in bounds: start of data is s + 32 and end is start + signature length
                uint256 contractSignatureLen;
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    contractSignatureLen := mload(add(add(signatures, s), 0x20))
                }
                require(uint256(s).add(32).add(contractSignatureLen) <= signatures.length, "GS023");
                // Check signature
                bytes memory contractSignature;
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    // The signature data for contract signatures is appended to the concatenated signatures and the offset is stored in s
                    contractSignature := add(add(signatures, s), 0x20)
                }
                require(ISignatureValidator(currentOwner).isValidSignature(data, contractSignature) == EIP1271_MAGIC_VALUE, "GS024");
            } else if (v == 1) {
                // If v is 1 then it is an approved hash
                // When handling approved hashes the address of the approver is encoded into r
                currentOwner = address(uint160(uint256(r)));
                // Hashes are automatically approved by the sender of the message or when they have been pre-approved via a separate transaction
                require(msg.sender == currentOwner || approvedHashes[currentOwner][dataHash] != 0, "GS025");
            } else if (v > 30) {
                // If v > 30 then default va (27,28) has been adjusted for eth_sign flow
                // To support eth_sign and similar we adjust v and hash the messageHash with the Ethereum message prefix before applying ecrecover
                currentOwner = ecrecover(keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", dataHash)), v - 4, r, s);
            } else {
                // Default is the ecrecover flow with the provided data hash
                // Use ecrecover with the messageHash for EOA signatures
                currentOwner = ecrecover(dataHash, v, r, s);
            }
            require(currentOwner > lastOwner && owners[currentOwner] != address(0) && currentOwner != SENTINEL_OWNERS, "GS026");
            lastOwner = currentOwner;
        }
    }
    /// @dev Allows to estimate a Safe transaction.
    ///      This method is only meant for estimation purpose, therefore the call will always revert and encode the result in the revert data.
    ///      Since the `estimateGas` function includes refunds, call this method to get an estimated of the costs that are deducted from the safe with `execTransaction`
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @return Estimate without refunds and overhead fees (base transaction and payload data gas costs).
    /// @notice Deprecated in favor of common/StorageAccessible.sol and will be removed in next version.
    function requiredTxGas(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation
    ) external returns (uint256) {
        uint256 startGas = gasleft();
        // We don't provide an error message here, as we use it to return the estimate
        require(execute(to, value, data, operation, gasleft()));
        uint256 requiredGas = startGas - gasleft();
        // Convert response to string and return via error message
        revert(string(abi.encodePacked(requiredGas)));
    }
    /**
     * @dev Marks a hash as approved. This can be used to validate a hash that is used by a signature.
     * @param hashToApprove The hash that should be marked as approved for signatures that are verified by this contract.
     */
    function approveHash(bytes32 hashToApprove) external {
        require(owners[msg.sender] != address(0), "GS030");
        approvedHashes[msg.sender][hashToApprove] = 1;
        emit ApproveHash(hashToApprove, msg.sender);
    }
    /// @dev Returns the chain id used by this contract.
    function getChainId() public view returns (uint256) {
        uint256 id;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            id := chainid()
        }
        return id;
    }
    function domainSeparator() public view returns (bytes32) {
        return keccak256(abi.encode(DOMAIN_SEPARATOR_TYPEHASH, getChainId(), this));
    }
    /// @dev Returns the bytes that are hashed to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Gas that should be used for the safe transaction.
    /// @param baseGas Gas costs for that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash bytes.
    function encodeTransactionData(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    ) public view returns (bytes memory) {
        bytes32 safeTxHash =
            keccak256(
                abi.encode(
                    SAFE_TX_TYPEHASH,
                    to,
                    value,
                    keccak256(data),
                    operation,
                    safeTxGas,
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    _nonce
                )
            );
        return abi.encodePacked(bytes1(0x19), bytes1(0x01), domainSeparator(), safeTxHash);
    }
    /// @dev Returns hash to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Fas that should be used for the safe transaction.
    /// @param baseGas Gas costs for data used to trigger the safe transaction.
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash.
    function getTransactionHash(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    ) public view returns (bytes32) {
        return keccak256(encodeTransactionData(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, _nonce));
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
/// @title Executor - A contract that can execute transactions
/// @author Richard Meissner - <[email protected]>
contract Executor {
    function execute(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 txGas
    ) internal returns (bool success) {
        if (operation == Enum.Operation.DelegateCall) {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                success := delegatecall(txGas, to, add(data, 0x20), mload(data), 0, 0)
            }
        } else {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                success := call(txGas, to, value, add(data, 0x20), mload(data), 0, 0)
            }
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract FallbackManager is SelfAuthorized {
    event ChangedFallbackHandler(address handler);
    // keccak256("fallback_manager.handler.address")
    bytes32 internal constant FALLBACK_HANDLER_STORAGE_SLOT = 0x6c9a6c4a39284e37ed1cf53d337577d14212a4870fb976a4366c693b939918d5;
    function internalSetFallbackHandler(address handler) internal {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, handler)
        }
    }
    /// @dev Allows to add a contract to handle fallback calls.
    ///      Only fallback calls without value and with data will be forwarded.
    ///      This can only be done via a Safe transaction.
    /// @param handler contract to handle fallbacks calls.
    function setFallbackHandler(address handler) public authorized {
        internalSetFallbackHandler(handler);
        emit ChangedFallbackHandler(handler);
    }
    // solhint-disable-next-line payable-fallback,no-complex-fallback
    fallback() external {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let handler := sload(slot)
            if iszero(handler) {
                return(0, 0)
            }
            calldatacopy(0, 0, calldatasize())
            // The msg.sender address is shifted to the left by 12 bytes to remove the padding
            // Then the address without padding is stored right after the calldata
            mstore(calldatasize(), shl(96, caller()))
            // Add 20 bytes for the address appended add the end
            let success := call(gas(), handler, 0, 0, add(calldatasize(), 20), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if iszero(success) {
                revert(0, returndatasize())
            }
            return(0, returndatasize())
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
interface Guard {
    function checkTransaction(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures,
        address msgSender
    ) external;
    function checkAfterExecution(bytes32 txHash, bool success) external;
}
/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract GuardManager is SelfAuthorized {
    event ChangedGuard(address guard);
    // keccak256("guard_manager.guard.address")
    bytes32 internal constant GUARD_STORAGE_SLOT = 0x4a204f620c8c5ccdca3fd54d003badd85ba500436a431f0cbda4f558c93c34c8;
    /// @dev Set a guard that checks transactions before execution
    /// @param guard The address of the guard to be used or the 0 address to disable the guard
    function setGuard(address guard) external authorized {
        bytes32 slot = GUARD_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, guard)
        }
        emit ChangedGuard(guard);
    }
    function getGuard() internal view returns (address guard) {
        bytes32 slot = GUARD_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            guard := sload(slot)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
import "./Executor.sol";
/// @title Module Manager - A contract that manages modules that can execute transactions via this contract
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract ModuleManager is SelfAuthorized, Executor {
    event EnabledModule(address module);
    event DisabledModule(address module);
    event ExecutionFromModuleSuccess(address indexed module);
    event ExecutionFromModuleFailure(address indexed module);
    address internal constant SENTINEL_MODULES = address(0x1);
    mapping(address => address) internal modules;
    function setupModules(address to, bytes memory data) internal {
        require(modules[SENTINEL_MODULES] == address(0), "GS100");
        modules[SENTINEL_MODULES] = SENTINEL_MODULES;
        if (to != address(0))
            // Setup has to complete successfully or transaction fails.
            require(execute(to, 0, data, Enum.Operation.DelegateCall, gasleft()), "GS000");
    }
    /// @dev Allows to add a module to the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @notice Enables the module `module` for the Safe.
    /// @param module Module to be whitelisted.
    function enableModule(address module) public authorized {
        // Module address cannot be null or sentinel.
        require(module != address(0) && module != SENTINEL_MODULES, "GS101");
        // Module cannot be added twice.
        require(modules[module] == address(0), "GS102");
        modules[module] = modules[SENTINEL_MODULES];
        modules[SENTINEL_MODULES] = module;
        emit EnabledModule(module);
    }
    /// @dev Allows to remove a module from the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @notice Disables the module `module` for the Safe.
    /// @param prevModule Module that pointed to the module to be removed in the linked list
    /// @param module Module to be removed.
    function disableModule(address prevModule, address module) public authorized {
        // Validate module address and check that it corresponds to module index.
        require(module != address(0) && module != SENTINEL_MODULES, "GS101");
        require(modules[prevModule] == module, "GS103");
        modules[prevModule] = modules[module];
        modules[module] = address(0);
        emit DisabledModule(module);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations.
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModule(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public virtual returns (bool success) {
        // Only whitelisted modules are allowed.
        require(msg.sender != SENTINEL_MODULES && modules[msg.sender] != address(0), "GS104");
        // Execute transaction without further confirmations.
        success = execute(to, value, data, operation, gasleft());
        if (success) emit ExecutionFromModuleSuccess(msg.sender);
        else emit ExecutionFromModuleFailure(msg.sender);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations and return data
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModuleReturnData(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public returns (bool success, bytes memory returnData) {
        success = execTransactionFromModule(to, value, data, operation);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Load free memory location
            let ptr := mload(0x40)
            // We allocate memory for the return data by setting the free memory location to
            // current free memory location + data size + 32 bytes for data size value
            mstore(0x40, add(ptr, add(returndatasize(), 0x20)))
            // Store the size
            mstore(ptr, returndatasize())
            // Store the data
            returndatacopy(add(ptr, 0x20), 0, returndatasize())
            // Point the return data to the correct memory location
            returnData := ptr
        }
    }
    /// @dev Returns if an module is enabled
    /// @return True if the module is enabled
    function isModuleEnabled(address module) public view returns (bool) {
        return SENTINEL_MODULES != module && modules[module] != address(0);
    }
    /// @dev Returns array of modules.
    /// @param start Start of the page.
    /// @param pageSize Maximum number of modules that should be returned.
    /// @return array Array of modules.
    /// @return next Start of the next page.
    function getModulesPaginated(address start, uint256 pageSize) external view returns (address[] memory array, address next) {
        // Init array with max page size
        array = new address[](pageSize);
        // Populate return array
        uint256 moduleCount = 0;
        address currentModule = modules[start];
        while (currentModule != address(0x0) && currentModule != SENTINEL_MODULES && moduleCount < pageSize) {
            array[moduleCount] = currentModule;
            currentModule = modules[currentModule];
            moduleCount++;
        }
        next = currentModule;
        // Set correct size of returned array
        // solhint-disable-next-line no-inline-assembly
        assembly {
            mstore(array, moduleCount)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/// @title OwnerManager - Manages a set of owners and a threshold to perform actions.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract OwnerManager is SelfAuthorized {
    event AddedOwner(address owner);
    event RemovedOwner(address owner);
    event ChangedThreshold(uint256 threshold);
    address internal constant SENTINEL_OWNERS = address(0x1);
    mapping(address => address) internal owners;
    uint256 internal ownerCount;
    uint256 internal threshold;
    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    function setupOwners(address[] memory _owners, uint256 _threshold) internal {
        // Threshold can only be 0 at initialization.
        // Check ensures that setup function can only be called once.
        require(threshold == 0, "GS200");
        // Validate that threshold is smaller than number of added owners.
        require(_threshold <= _owners.length, "GS201");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "GS202");
        // Initializing Safe owners.
        address currentOwner = SENTINEL_OWNERS;
        for (uint256 i = 0; i < _owners.length; i++) {
            // Owner address cannot be null.
            address owner = _owners[i];
            require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this) && currentOwner != owner, "GS203");
            // No duplicate owners allowed.
            require(owners[owner] == address(0), "GS204");
            owners[currentOwner] = owner;
            currentOwner = owner;
        }
        owners[currentOwner] = SENTINEL_OWNERS;
        ownerCount = _owners.length;
        threshold = _threshold;
    }
    /// @dev Allows to add a new owner to the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @notice Adds the owner `owner` to the Safe and updates the threshold to `_threshold`.
    /// @param owner New owner address.
    /// @param _threshold New threshold.
    function addOwnerWithThreshold(address owner, uint256 _threshold) public authorized {
        // Owner address cannot be null, the sentinel or the Safe itself.
        require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this), "GS203");
        // No duplicate owners allowed.
        require(owners[owner] == address(0), "GS204");
        owners[owner] = owners[SENTINEL_OWNERS];
        owners[SENTINEL_OWNERS] = owner;
        ownerCount++;
        emit AddedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold) changeThreshold(_threshold);
    }
    /// @dev Allows to remove an owner from the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @notice Removes the owner `owner` from the Safe and updates the threshold to `_threshold`.
    /// @param prevOwner Owner that pointed to the owner to be removed in the linked list
    /// @param owner Owner address to be removed.
    /// @param _threshold New threshold.
    function removeOwner(
        address prevOwner,
        address owner,
        uint256 _threshold
    ) public authorized {
        // Only allow to remove an owner, if threshold can still be reached.
        require(ownerCount - 1 >= _threshold, "GS201");
        // Validate owner address and check that it corresponds to owner index.
        require(owner != address(0) && owner != SENTINEL_OWNERS, "GS203");
        require(owners[prevOwner] == owner, "GS205");
        owners[prevOwner] = owners[owner];
        owners[owner] = address(0);
        ownerCount--;
        emit RemovedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold) changeThreshold(_threshold);
    }
    /// @dev Allows to swap/replace an owner from the Safe with another address.
    ///      This can only be done via a Safe transaction.
    /// @notice Replaces the owner `oldOwner` in the Safe with `newOwner`.
    /// @param prevOwner Owner that pointed to the owner to be replaced in the linked list
    /// @param oldOwner Owner address to be replaced.
    /// @param newOwner New owner address.
    function swapOwner(
        address prevOwner,
        address oldOwner,
        address newOwner
    ) public authorized {
        // Owner address cannot be null, the sentinel or the Safe itself.
        require(newOwner != address(0) && newOwner != SENTINEL_OWNERS && newOwner != address(this), "GS203");
        // No duplicate owners allowed.
        require(owners[newOwner] == address(0), "GS204");
        // Validate oldOwner address and check that it corresponds to owner index.
        require(oldOwner != address(0) && oldOwner != SENTINEL_OWNERS, "GS203");
        require(owners[prevOwner] == oldOwner, "GS205");
        owners[newOwner] = owners[oldOwner];
        owners[prevOwner] = newOwner;
        owners[oldOwner] = address(0);
        emit RemovedOwner(oldOwner);
        emit AddedOwner(newOwner);
    }
    /// @dev Allows to update the number of required confirmations by Safe owners.
    ///      This can only be done via a Safe transaction.
    /// @notice Changes the threshold of the Safe to `_threshold`.
    /// @param _threshold New threshold.
    function changeThreshold(uint256 _threshold) public authorized {
        // Validate that threshold is smaller than number of owners.
        require(_threshold <= ownerCount, "GS201");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "GS202");
        threshold = _threshold;
        emit ChangedThreshold(threshold);
    }
    function getThreshold() public view returns (uint256) {
        return threshold;
    }
    function isOwner(address owner) public view returns (bool) {
        return owner != SENTINEL_OWNERS && owners[owner] != address(0);
    }
    /// @dev Returns array of owners.
    /// @return Array of Safe owners.
    function getOwners() public view returns (address[] memory) {
        address[] memory array = new address[](ownerCount);
        // populate return array
        uint256 index = 0;
        address currentOwner = owners[SENTINEL_OWNERS];
        while (currentOwner != SENTINEL_OWNERS) {
            array[index] = currentOwner;
            currentOwner = owners[currentOwner];
            index++;
        }
        return array;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title Enum - Collection of enums
/// @author Richard Meissner - <[email protected]>
contract Enum {
    enum Operation {Call, DelegateCall}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title EtherPaymentFallback - A contract that has a fallback to accept ether payments
/// @author Richard Meissner - <[email protected]>
contract EtherPaymentFallback {
    event SafeReceived(address indexed sender, uint256 value);
    /// @dev Fallback function accepts Ether transactions.
    receive() external payable {
        emit SafeReceived(msg.sender, msg.value);
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SecuredTokenTransfer - Secure token transfer
/// @author Richard Meissner - <[email protected]>
contract SecuredTokenTransfer {
    /// @dev Transfers a token and returns if it was a success
    /// @param token Token that should be transferred
    /// @param receiver Receiver to whom the token should be transferred
    /// @param amount The amount of tokens that should be transferred
    function transferToken(
        address token,
        address receiver,
        uint256 amount
    ) internal returns (bool transferred) {
        // 0xa9059cbb - keccack("transfer(address,uint256)")
        bytes memory data = abi.encodeWithSelector(0xa9059cbb, receiver, amount);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // We write the return value to scratch space.
            // See https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory
            let success := call(sub(gas(), 10000), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            switch returndatasize()
                case 0 {
                    transferred := success
                }
                case 0x20 {
                    transferred := iszero(or(iszero(success), iszero(mload(0))))
                }
                default {
                    transferred := 0
                }
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SelfAuthorized - authorizes current contract to perform actions
/// @author Richard Meissner - <[email protected]>
contract SelfAuthorized {
    function requireSelfCall() private view {
        require(msg.sender == address(this), "GS031");
    }
    modifier authorized() {
        // This is a function call as it minimized the bytecode size
        requireSelfCall();
        _;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SignatureDecoder - Decodes signatures that a encoded as bytes
/// @author Richard Meissner - <[email protected]>
contract SignatureDecoder {
    /// @dev divides bytes signature into `uint8 v, bytes32 r, bytes32 s`.
    /// @notice Make sure to peform a bounds check for @param pos, to avoid out of bounds access on @param signatures
    /// @param pos which signature to read. A prior bounds check of this parameter should be performed, to avoid out of bounds access
    /// @param signatures concatenated rsv signatures
    function signatureSplit(bytes memory signatures, uint256 pos)
        internal
        pure
        returns (
            uint8 v,
            bytes32 r,
            bytes32 s
        )
    {
        // The signature format is a compact form of:
        //   {bytes32 r}{bytes32 s}{uint8 v}
        // Compact means, uint8 is not padded to 32 bytes.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let signaturePos := mul(0x41, pos)
            r := mload(add(signatures, add(signaturePos, 0x20)))
            s := mload(add(signatures, add(signaturePos, 0x40)))
            // Here we are loading the last 32 bytes, including 31 bytes
            // of 's'. There is no 'mload8' to do this.
            //
            // 'byte' is not working due to the Solidity parser, so lets
            // use the second best option, 'and'
            v := and(mload(add(signatures, add(signaturePos, 0x41))), 0xff)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title Singleton - Base for singleton contracts (should always be first super contract)
///         This contract is tightly coupled to our proxy contract (see `proxies/GnosisSafeProxy.sol`)
/// @author Richard Meissner - <[email protected]>
contract Singleton {
    // singleton always needs to be first declared variable, to ensure that it is at the same location as in the Proxy contract.
    // It should also always be ensured that the address is stored alone (uses a full word)
    address private singleton;
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title StorageAccessible - generic base contract that allows callers to access all internal storage.
/// @notice See https://github.com/gnosis/util-contracts/blob/bb5fe5fb5df6d8400998094fb1b32a178a47c3a1/contracts/StorageAccessible.sol
contract StorageAccessible {
    /**
     * @dev Reads `length` bytes of storage in the currents contract
     * @param offset - the offset in the current contract's storage in words to start reading from
     * @param length - the number of words (32 bytes) of data to read
     * @return the bytes that were read.
     */
    function getStorageAt(uint256 offset, uint256 length) public view returns (bytes memory) {
        bytes memory result = new bytes(length * 32);
        for (uint256 index = 0; index < length; index++) {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                let word := sload(add(offset, index))
                mstore(add(add(result, 0x20), mul(index, 0x20)), word)
            }
        }
        return result;
    }
    /**
     * @dev Performs a delegetecall on a targetContract in the context of self.
     * Internally reverts execution to avoid side effects (making it static).
     *
     * This method reverts with data equal to `abi.encode(bool(success), bytes(response))`.
     * Specifically, the `returndata` after a call to this method will be:
     * `success:bool || response.length:uint256 || response:bytes`.
     *
     * @param targetContract Address of the contract containing the code to execute.
     * @param calldataPayload Calldata that should be sent to the target contract (encoded method name and arguments).
     */
    function simulateAndRevert(address targetContract, bytes memory calldataPayload) external {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let success := delegatecall(gas(), targetContract, add(calldataPayload, 0x20), mload(calldataPayload), 0, 0)
            mstore(0x00, success)
            mstore(0x20, returndatasize())
            returndatacopy(0x40, 0, returndatasize())
            revert(0, add(returndatasize(), 0x40))
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
 * @title GnosisSafeMath
 * @dev Math operations with safety checks that revert on error
 * Renamed from SafeMath to GnosisSafeMath to avoid conflicts
 * TODO: remove once open zeppelin update to solc 0.5.0
 */
library GnosisSafeMath {
    /**
     * @dev Multiplies two numbers, reverts on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b);
        return c;
    }
    /**
     * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Adds two numbers, reverts on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);
        return c;
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
contract ISignatureValidatorConstants {
    // bytes4(keccak256("isValidSignature(bytes,bytes)")
    bytes4 internal constant EIP1271_MAGIC_VALUE = 0x20c13b0b;
}
abstract contract ISignatureValidator is ISignatureValidatorConstants {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param _data Arbitrary length data signed on the behalf of address(this)
     * @param _signature Signature byte array associated with _data
     *
     * MUST return the bytes4 magic value 0x20c13b0b when function passes.
     * MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
     * MUST allow external calls
     */
    function isValidSignature(bytes memory _data, bytes memory _signature) public view virtual returns (bytes4);
}

// File: @openzeppelin/contracts/math/SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: contracts/v1/AbstractFiatTokenV1.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;

    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}

// File: contracts/v1/Ownable.sol

/**
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;

/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;

    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);

    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }

    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }

    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}

// File: contracts/v1/Pausable.sol

/**
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ0
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);

    address public pauser;
    bool public paused = false;

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }

    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }

    /**
     * @dev update the pauser role
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}

// File: contracts/v1/Blacklistable.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal blacklisted;

    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);

    /**
     * @dev Throws if called by any account other than the blacklister
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }

    /**
     * @dev Throws if argument account is blacklisted
     * @param _account The address to check
     */
    modifier notBlacklisted(address _account) {
        require(
            !blacklisted[_account],
            "Blacklistable: account is blacklisted"
        );
        _;
    }

    /**
     * @dev Checks if account is blacklisted
     * @param _account The address to check
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return blacklisted[_account];
    }

    /**
     * @dev Adds account to blacklist
     * @param _account The address to blacklist
     */
    function blacklist(address _account) external onlyBlacklister {
        blacklisted[_account] = true;
        emit Blacklisted(_account);
    }

    /**
     * @dev Removes account from blacklist
     * @param _account The address to remove from the blacklist
     */
    function unBlacklist(address _account) external onlyBlacklister {
        blacklisted[_account] = false;
        emit UnBlacklisted(_account);
    }

    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
}

// File: contracts/v1/FiatTokenV1.sol

/**
 *
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;

    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;

    mapping(address => uint256) internal balances;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;

    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);

    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );

        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }

    /**
     * @dev Throws if called by any account other than a minter
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }

    /**
     * @dev Function to mint tokens
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");

        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );

        totalSupply_ = totalSupply_.add(_amount);
        balances[_to] = balances[_to].add(_amount);
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }

    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }

    /**
     * @dev Get minter allowance for an account
     * @param minter The address of the minter
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }

    /**
     * @dev Checks if account is a minter
     * @param account The address to check
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }

    /**
     * @notice Amount of remaining tokens spender is allowed to transfer on
     * behalf of the token owner
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @return Allowance amount
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }

    /**
     * @dev Get totalSupply of token
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }

    /**
     * @dev Get token balance of an account
     * @param account address The account
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return balances[account];
    }

    /**
     * @notice Set spender's allowance over the caller's tokens to be a given
     * value.
     * @param spender   Spender's address
     * @param value     Allowance amount
     * @return True if successful
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Internal function to set allowance
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param value     Allowance amount
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    /**
     * @notice Transfer tokens by spending allowance
     * @param from  Payer's address
     * @param to    Payee's address
     * @param value Transfer amount
     * @return True if successful
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }

    /**
     * @notice Transfer tokens from the caller
     * @param to    Payee's address
     * @param value Transfer amount
     * @return True if successful
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @notice Internal function to process transfers
     * @param from  Payer's address
     * @param to    Payee's address
     * @param value Transfer amount
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= balances[from],
            "ERC20: transfer amount exceeds balance"
        );

        balances[from] = balances[from].sub(value);
        balances[to] = balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Function to add/update a new minter
     * @param minter The address of the minter
     * @param minterAllowedAmount The minting amount allowed for the minter
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }

    /**
     * @dev Function to remove a minter
     * @param minter The address of the minter to remove
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }

    /**
     * @dev allows a minter to burn some of its own tokens
     * Validates that caller is a minter and that sender is not blacklisted
     * amount is less than or equal to the minter's account balance
     * @param _amount uint256 the amount of tokens to be burned
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = balances[msg.sender];
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");

        totalSupply_ = totalSupply_.sub(_amount);
        balances[msg.sender] = balance.sub(_amount);
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }

    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;

            bytes32 accountHash
         = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            codehash := extcodehash(account)
        }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(
        address target,
        bytes memory data,
        uint256 weiValue,
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{
            value: weiValue
        }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol

pragma solidity ^0.6.0;

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(
            value
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeERC20: decreased allowance below zero"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// File: contracts/v1.1/Rescuable.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

contract Rescuable is Ownable {
    using SafeERC20 for IERC20;

    address private _rescuer;

    event RescuerChanged(address indexed newRescuer);

    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }

    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }

    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }

    /**
     * @notice Assign the rescuer role to a given address.
     * @param newRescuer New rescuer's address
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}

// File: contracts/v1.1/FiatTokenV1_1.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {

}

// File: contracts/v2/AbstractFiatTokenV2.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;

    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}

// File: contracts/util/ECRecover.sol

/**
 * Copyright (c) 2016-2019 zOS Global Limited
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }

        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");

        return signer;
    }
}

// File: contracts/util/EIP712.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }

    /**
     * @notice Recover signer's address from a EIP712 signature
     * @param domainSeparator   Domain separator
     * @param v                 v of the signature
     * @param r                 r of the signature
     * @param s                 s of the signature
     * @param typeHashAndData   Type hash concatenated with data
     * @return Signer's address
     */
    function recover(
        bytes32 domainSeparator,
        uint8 v,
        bytes32 r,
        bytes32 s,
        bytes memory typeHashAndData
    ) internal pure returns (address) {
        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                domainSeparator,
                keccak256(typeHashAndData)
            )
        );
        return ECRecover.recover(digest, v, r, s);
    }
}

// File: contracts/v2/EIP712Domain.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    /**
     * @dev EIP712 Domain Separator
     */
    bytes32 public DOMAIN_SEPARATOR;
}

// File: contracts/v2/EIP3009.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;

    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;

    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;

    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;

    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );

    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }

    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);

        bytes memory data = abi.encode(
            TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == from,
            "FiatTokenV2: invalid signature"
        );

        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }

    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);

        bytes memory data = abi.encode(
            RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == from,
            "FiatTokenV2: invalid signature"
        );

        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }

    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);

        bytes memory data = abi.encode(
            CANCEL_AUTHORIZATION_TYPEHASH,
            authorizer,
            nonce
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == authorizer,
            "FiatTokenV2: invalid signature"
        );

        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }

    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }

    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }

    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}

// File: contracts/v2/EIP2612.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;

    mapping(address => uint256) private _permitNonces;

    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }

    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which this expires (unix time)
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        require(deadline >= now, "FiatTokenV2: permit is expired");

        bytes memory data = abi.encode(
            PERMIT_TYPEHASH,
            owner,
            spender,
            value,
            _permitNonces[owner]++,
            deadline
        );
        require(
            EIP712.recover(DOMAIN_SEPARATOR, v, r, s, data) == owner,
            "EIP2612: invalid signature"
        );

        _approve(owner, spender, value);
    }
}

// File: contracts/v2/FiatTokenV2.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;

    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(newName, "2");
        _initializedVersion = 1;
    }

    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }

    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }

    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }

    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }

    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }

    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    Expiration time, seconds since the epoch
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(owner) notBlacklisted(spender) {
        _permit(owner, spender, value, deadline, v, r, s);
    }

    /**
     * @notice Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }

    /**
     * @notice Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}

// File: contracts/v2/FiatTokenV2_1.sol

/**
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

pragma solidity 0.6.12;

// solhint-disable func-name-mixedcase

/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);

        uint256 lockedAmount = balances[address(this)];
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        blacklisted[address(this)] = true;

        _initializedVersion = 2;
    }

    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external view returns (string memory) {
        return "2";
    }
}