/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;
pragma experimental ABIEncoderV2;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


// solhint-disable max-line-length
contract LibConstants {
   
    // Asset data for ZRX token. Used for fee transfers.
    // @TODO: Hardcode constant when we deploy. Currently 
    //        not constant to make testing easier.

    // The proxyId for ZRX_ASSET_DATA is bytes4(keccak256("ERC20Token(address)")) = 0xf47261b0
    
    // Kovan ZRX address is 0x6ff6c0ff1d68b964901f986d4c9fa3ac68346570.
    // The ABI encoded proxyId and address is 0xf47261b00000000000000000000000006ff6c0ff1d68b964901f986d4c9fa3ac68346570
    // bytes constant public ZRX_ASSET_DATA = "\xf4\x72\x61\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x6f\xf6\xc0\xff\x1d\x68\xb9\x64\x90\x1f\x98\x6d\x4c\x9f\xa3\xac\x68\x34\x65\x70";
    
    // Mainnet ZRX address is 0xe41d2489571d322189246dafa5ebde1f4699f498.
    // The ABI encoded proxyId and address is 0xf47261b0000000000000000000000000e41d2489571d322189246dafa5ebde1f4699f498
    // bytes constant public ZRX_ASSET_DATA = "\xf4\x72\x61\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe4\x1d\x24\x89\x57\x1d\x32\x21\x89\x24\x6d\xaf\xa5\xeb\xde\x1f\x46\x99\xf4\x98";
    
    // solhint-disable-next-line var-name-mixedcase
    bytes public ZRX_ASSET_DATA;

    // @TODO: Remove when we deploy.
    constructor (bytes memory zrxAssetData)
        public
    {
        ZRX_ASSET_DATA = zrxAssetData;
    }
}
// solhint-enable max-line-length

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract ReentrancyGuard {

    // Locked state of mutex
    bool private locked = false;

    /// @dev Functions with this modifer cannot be reentered. The mutex will be locked
    ///      before function execution and unlocked after.
    modifier nonReentrant() {
        // Ensure mutex is unlocked
        require(
            !locked,
            "REENTRANCY_ILLEGAL"
        );

        // Lock mutex before function call
        locked = true;

        // Perform function call
        _;

        // Unlock mutex after function call
        locked = false;
    }
}


/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

pragma solidity 0.4.24;


contract SafeMath {

    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(
            c / a == b,
            "UINT256_OVERFLOW"
        );
        return c;
    }

    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a / b;
        return c;
    }

    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        require(
            b <= a,
            "UINT256_UNDERFLOW"
        );
        return a - b;
    }

    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        require(
            c >= a,
            "UINT256_OVERFLOW"
        );
        return c;
    }

    function max64(uint64 a, uint64 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }

    function min64(uint64 a, uint64 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }

    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }

    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
}



contract LibFillResults is
    SafeMath
{
    struct FillResults {
        uint256 makerAssetFilledAmount;  // Total amount of makerAsset(s) filled.
        uint256 takerAssetFilledAmount;  // Total amount of takerAsset(s) filled.
        uint256 makerFeePaid;            // Total amount of ZRX paid by maker(s) to feeRecipient(s).
        uint256 takerFeePaid;            // Total amount of ZRX paid by taker to feeRecipients(s).
    }

    struct MatchedFillResults {
        FillResults left;                    // Amounts filled and fees paid of left order.
        FillResults right;                   // Amounts filled and fees paid of right order.
        uint256 leftMakerAssetSpreadAmount;  // Spread between price of left and right order, denominated in the left order's makerAsset, paid to taker.
    }

    /// @dev Adds properties of both FillResults instances.
    ///      Modifies the first FillResults instance specified.
    /// @param totalFillResults Fill results instance that will be added onto.
    /// @param singleFillResults Fill results instance that will be added to totalFillResults.
    function addFillResults(FillResults memory totalFillResults, FillResults memory singleFillResults)
        internal
        pure
    {
        totalFillResults.makerAssetFilledAmount = safeAdd(totalFillResults.makerAssetFilledAmount, singleFillResults.makerAssetFilledAmount);
        totalFillResults.takerAssetFilledAmount = safeAdd(totalFillResults.takerAssetFilledAmount, singleFillResults.takerAssetFilledAmount);
        totalFillResults.makerFeePaid = safeAdd(totalFillResults.makerFeePaid, singleFillResults.makerFeePaid);
        totalFillResults.takerFeePaid = safeAdd(totalFillResults.takerFeePaid, singleFillResults.takerFeePaid);
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract LibEIP712 {

    // EIP191 header for EIP712 prefix
    string constant internal EIP191_HEADER = "\x19\x01";

    // EIP712 Domain Name value
    string constant internal EIP712_DOMAIN_NAME = "0x Protocol";

    // EIP712 Domain Version value
    string constant internal EIP712_DOMAIN_VERSION = "2";

    // Hash of the EIP712 Domain Separator Schema
    bytes32 constant internal EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH = keccak256(abi.encodePacked(
        "EIP712Domain(",
        "string name,",
        "string version,",
        "address verifyingContract",
        ")"
    ));

    // Hash of the EIP712 Domain Separator data
    // solhint-disable-next-line var-name-mixedcase
    bytes32 public EIP712_DOMAIN_HASH;

    constructor ()
        public
    {
        EIP712_DOMAIN_HASH = keccak256(abi.encodePacked(
            EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH,
            keccak256(bytes(EIP712_DOMAIN_NAME)),
            keccak256(bytes(EIP712_DOMAIN_VERSION)),
            bytes32(address(this))
        ));
    }

    /// @dev Calculates EIP712 encoding for a hash struct in this EIP712 Domain.
    /// @param hashStruct The EIP712 hash struct.
    /// @return EIP712 hash applied to this EIP712 Domain.
    function hashEIP712Message(bytes32 hashStruct)
        internal
        view
        returns (bytes32 result)
    {
        bytes32 eip712DomainHash = EIP712_DOMAIN_HASH;

        // Assembly for more efficient computing:
        // keccak256(abi.encodePacked(
        //     EIP191_HEADER,
        //     EIP712_DOMAIN_HASH,
        //     hashStruct    
        // ));

        assembly {
            // Load free memory pointer
            let memPtr := mload(64)

            mstore(memPtr, 0x1901000000000000000000000000000000000000000000000000000000000000)  // EIP191 header
            mstore(add(memPtr, 2), eip712DomainHash)                                            // EIP712 domain hash
            mstore(add(memPtr, 34), hashStruct)                                                 // Hash of struct

            // Compute hash
            result := keccak256(memPtr, 66)
        }
        return result;
    }
}



contract LibOrder is
    LibEIP712
{
    // Hash for the EIP712 Order Schema
    bytes32 constant internal EIP712_ORDER_SCHEMA_HASH = keccak256(abi.encodePacked(
        "Order(",
        "address makerAddress,",
        "address takerAddress,",
        "address feeRecipientAddress,",
        "address senderAddress,",
        "uint256 makerAssetAmount,",
        "uint256 takerAssetAmount,",
        "uint256 makerFee,",
        "uint256 takerFee,",
        "uint256 expirationTimeSeconds,",
        "uint256 salt,",
        "bytes makerAssetData,",
        "bytes takerAssetData",
        ")"
    ));

    // A valid order remains fillable until it is expired, fully filled, or cancelled.
    // An order's state is unaffected by external factors, like account balances.
    enum OrderStatus {
        INVALID,                     // Default value
        INVALID_MAKER_ASSET_AMOUNT,  // Order does not have a valid maker asset amount
        INVALID_TAKER_ASSET_AMOUNT,  // Order does not have a valid taker asset amount
        FILLABLE,                    // Order is fillable
        EXPIRED,                     // Order has already expired
        FULLY_FILLED,                // Order is fully filled
        CANCELLED                    // Order has been cancelled
    }

    // solhint-disable max-line-length
    struct Order {
        address makerAddress;           // Address that created the order.      
        address takerAddress;           // Address that is allowed to fill the order. If set to 0, any address is allowed to fill the order.          
        address feeRecipientAddress;    // Address that will recieve fees when order is filled.      
        address senderAddress;          // Address that is allowed to call Exchange contract methods that affect this order. If set to 0, any address is allowed to call these methods.
        uint256 makerAssetAmount;       // Amount of makerAsset being offered by maker. Must be greater than 0.        
        uint256 takerAssetAmount;       // Amount of takerAsset being bid on by maker. Must be greater than 0.        
        uint256 makerFee;               // Amount of ZRX paid to feeRecipient by maker when order is filled. If set to 0, no transfer of ZRX from maker to feeRecipient will be attempted.
        uint256 takerFee;               // Amount of ZRX paid to feeRecipient by taker when order is filled. If set to 0, no transfer of ZRX from taker to feeRecipient will be attempted.
        uint256 expirationTimeSeconds;  // Timestamp in seconds at which order expires.          
        uint256 salt;                   // Arbitrary number to facilitate uniqueness of the order's hash.     
        bytes makerAssetData;           // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset. The last byte references the id of this proxy.
        bytes takerAssetData;           // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset. The last byte references the id of this proxy.
    }
    // solhint-enable max-line-length

    struct OrderInfo {
        uint8 orderStatus;                    // Status that describes order's validity and fillability.
        bytes32 orderHash;                    // EIP712 hash of the order (see LibOrder.getOrderHash).
        uint256 orderTakerAssetFilledAmount;  // Amount of order that has already been filled.
    }

    /// @dev Calculates Keccak-256 hash of the order.
    /// @param order The order structure.
    /// @return Keccak-256 EIP712 hash of the order.
    function getOrderHash(Order memory order)
        internal
        view
        returns (bytes32 orderHash)
    {
        orderHash = hashEIP712Message(hashOrder(order));
        return orderHash;
    }

    /// @dev Calculates EIP712 hash of the order.
    /// @param order The order structure.
    /// @return EIP712 hash of the order.
    function hashOrder(Order memory order)
        internal
        pure
        returns (bytes32 result)
    {
        bytes32 schemaHash = EIP712_ORDER_SCHEMA_HASH;
        bytes32 makerAssetDataHash = keccak256(order.makerAssetData);
        bytes32 takerAssetDataHash = keccak256(order.takerAssetData);

        // Assembly for more efficiently computing:
        // keccak256(abi.encodePacked(
        //     EIP712_ORDER_SCHEMA_HASH,
        //     bytes32(order.makerAddress),
        //     bytes32(order.takerAddress),
        //     bytes32(order.feeRecipientAddress),
        //     bytes32(order.senderAddress),
        //     order.makerAssetAmount,
        //     order.takerAssetAmount,
        //     order.makerFee,
        //     order.takerFee,
        //     order.expirationTimeSeconds,
        //     order.salt,
        //     keccak256(order.makerAssetData),
        //     keccak256(order.takerAssetData)
        // ));

        assembly {
            // Calculate memory addresses that will be swapped out before hashing
            let pos1 := sub(order, 32)
            let pos2 := add(order, 320)
            let pos3 := add(order, 352)

            // Backup
            let temp1 := mload(pos1)
            let temp2 := mload(pos2)
            let temp3 := mload(pos3)
            
            // Hash in place
            mstore(pos1, schemaHash)
            mstore(pos2, makerAssetDataHash)
            mstore(pos3, takerAssetDataHash)
            result := keccak256(pos1, 416)
            
            // Restore
            mstore(pos1, temp1)
            mstore(pos2, temp2)
            mstore(pos3, temp3)
        }
        return result;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;




contract LibMath is
    SafeMath
{
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded down.
    function safeGetPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        require(
            !isRoundingErrorFloor(
                numerator,
                denominator,
                target
            ),
            "ROUNDING_ERROR"
        );
        
        partialAmount = safeDiv(
            safeMul(numerator, target),
            denominator
        );
        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded up.
    function safeGetPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        require(
            !isRoundingErrorCeil(
                numerator,
                denominator,
                target
            ),
            "ROUNDING_ERROR"
        );
        
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = safeDiv(
            safeAdd(
                safeMul(numerator, target),
                safeSub(denominator, 1)
            ),
            denominator
        );
        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded down.
    function getPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        partialAmount = safeDiv(
            safeMul(numerator, target),
            denominator
        );
        return partialAmount;
    }
    
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return Partial value of target rounded up.
    function getPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );

        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = safeDiv(
            safeAdd(
                safeMul(numerator, target),
                safeSub(denominator, 1)
            ),
            denominator
        );
        return partialAmount;
    }
    
    /// @dev Checks if rounding error >= 0.1% when rounding down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return Rounding error is present.
    function isRoundingErrorFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );
        
        // The absolute rounding error is the difference between the rounded
        // value and the ideal value. The relative rounding error is the
        // absolute rounding error divided by the absolute value of the
        // ideal value. This is undefined when the ideal value is zero.
        //
        // The ideal value is `numerator * target / denominator`.
        // Let's call `numerator * target % denominator` the remainder.
        // The absolute error is `remainder / denominator`.
        //
        // When the ideal value is zero, we require the absolute error to
        // be zero. Fortunately, this is always the case. The ideal value is
        // zero iff `numerator == 0` and/or `target == 0`. In this case the
        // remainder and absolute error are also zero. 
        if (target == 0 || numerator == 0) {
            return false;
        }
        
        // Otherwise, we want the relative rounding error to be strictly
        // less than 0.1%.
        // The relative error is `remainder / (numerator * target)`.
        // We want the relative error less than 1 / 1000:
        //        remainder / (numerator * denominator)  <  1 / 1000
        // or equivalently:
        //        1000 * remainder  <  numerator * target
        // so we have a rounding error iff:
        //        1000 * remainder  >=  numerator * target
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        isError = safeMul(1000, remainder) >= safeMul(numerator, target);
        return isError;
    }
    
    /// @dev Checks if rounding error >= 0.1% when rounding up.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return Rounding error is present.
    function isRoundingErrorCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        require(
            denominator > 0,
            "DIVISION_BY_ZERO"
        );
        
        // See the comments in `isRoundingError`.
        if (target == 0 || numerator == 0) {
            // When either is zero, the ideal value and rounded value are zero
            // and there is no rounding error. (Although the relative error
            // is undefined.)
            return false;
        }
        // Compute remainder as before
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        remainder = safeSub(denominator, remainder) % denominator;
        isError = safeMul(1000, remainder) >= safeMul(numerator, target);
        return isError;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;



/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;





contract IExchangeCore {

    /// @dev Cancels all orders created by makerAddress with a salt less than or equal to the targetOrderEpoch
    ///      and senderAddress equal to msg.sender (or null address if msg.sender == makerAddress).
    /// @param targetOrderEpoch Orders created with a salt less or equal to this value will be cancelled.
    function cancelOrdersUpTo(uint256 targetOrderEpoch)
        external;

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev After calling, the order can not be filled anymore.
    /// @param order Order struct containing order specifications.
    function cancelOrder(LibOrder.Order memory order)
        public;

    /// @dev Gets information about an order: status, hash, and amount filled.
    /// @param order Order to gather information on.
    /// @return OrderInfo Information about the order and its state.
    ///                   See LibOrder.OrderInfo for a complete description.
    function getOrderInfo(LibOrder.Order memory order)
        public
        view
        returns (LibOrder.OrderInfo memory orderInfo);
}



contract MExchangeCore is
    IExchangeCore
{
    // Fill event is emitted whenever an order is filled.
    event Fill(
        address indexed makerAddress,         // Address that created the order.      
        address indexed feeRecipientAddress,  // Address that received fees.
        address takerAddress,                 // Address that filled the order.
        address senderAddress,                // Address that called the Exchange contract (msg.sender).
        uint256 makerAssetFilledAmount,       // Amount of makerAsset sold by maker and bought by taker. 
        uint256 takerAssetFilledAmount,       // Amount of takerAsset sold by taker and bought by maker.
        uint256 makerFeePaid,                 // Amount of ZRX paid to feeRecipient by maker.
        uint256 takerFeePaid,                 // Amount of ZRX paid to feeRecipient by taker.
        bytes32 indexed orderHash,            // EIP712 hash of order (see LibOrder.getOrderHash).
        bytes makerAssetData,                 // Encoded data specific to makerAsset. 
        bytes takerAssetData                  // Encoded data specific to takerAsset.
    );

    // Cancel event is emitted whenever an individual order is cancelled.
    event Cancel(
        address indexed makerAddress,         // Address that created the order.      
        address indexed feeRecipientAddress,  // Address that would have recieved fees if order was filled.   
        address senderAddress,                // Address that called the Exchange contract (msg.sender).
        bytes32 indexed orderHash,            // EIP712 hash of order (see LibOrder.getOrderHash).
        bytes makerAssetData,                 // Encoded data specific to makerAsset. 
        bytes takerAssetData                  // Encoded data specific to takerAsset.
    );

    // CancelUpTo event is emitted whenever `cancelOrdersUpTo` is executed succesfully.
    event CancelUpTo(
        address indexed makerAddress,         // Orders cancelled must have been created by this address.
        address indexed senderAddress,        // Orders cancelled must have a `senderAddress` equal to this address.
        uint256 orderEpoch                    // Orders with specified makerAddress and senderAddress with a salt less than this value are considered cancelled.
    );

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderInternal(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev After calling, the order can not be filled anymore.
    /// @param order Order struct containing order specifications.
    function cancelOrderInternal(LibOrder.Order memory order)
        internal;

    /// @dev Updates state with results of a fill order.
    /// @param order that was filled.
    /// @param takerAddress Address of taker who filled the order.
    /// @param orderTakerAssetFilledAmount Amount of order already filled.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function updateFilledState(
        LibOrder.Order memory order,
        address takerAddress,
        bytes32 orderHash,
        uint256 orderTakerAssetFilledAmount,
        LibFillResults.FillResults memory fillResults
    )
        internal;

    /// @dev Updates state with results of cancelling an order.
    ///      State is only updated if the order is currently fillable.
    ///      Otherwise, updating state would have no effect.
    /// @param order that was cancelled.
    /// @param orderHash Hash of order that was cancelled.
    function updateCancelledState(
        LibOrder.Order memory order,
        bytes32 orderHash
    )
        internal;
    
    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    /// @param takerAddress Address of order taker.
    /// @param signature Proof that the orders was created by its maker.
    function assertFillableOrder(
        LibOrder.Order memory order,
        LibOrder.OrderInfo memory orderInfo,
        address takerAddress,
        bytes memory signature
    )
        internal
        view;
    
    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo Status, orderHash, and amount already filled of order.
    /// @param takerAssetFillAmount Desired amount of order to fill by taker.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @param makerAssetFilledAmount Amount of makerAsset that will be transfered.
    function assertValidFill(
        LibOrder.Order memory order,
        LibOrder.OrderInfo memory orderInfo,
        uint256 takerAssetFillAmount,
        uint256 takerAssetFilledAmount,
        uint256 makerAssetFilledAmount
    )
        internal
        view;

    /// @dev Validates context for cancelOrder. Succeeds or throws.
    /// @param order to be cancelled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    function assertValidCancel(
        LibOrder.Order memory order,
        LibOrder.OrderInfo memory orderInfo
    )
        internal
        view;

    /// @dev Calculates amounts filled and fees paid by maker and taker.
    /// @param order to be filled.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function calculateFillResults(
        LibOrder.Order memory order,
        uint256 takerAssetFilledAmount
    )
        internal
        pure
        returns (LibFillResults.FillResults memory fillResults);

}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract ISignatureValidator {

    /// @dev Approves a hash on-chain using any valid signature type.
    ///      After presigning a hash, the preSign signature type will become valid for that hash and signer.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    function preSign(
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        external;
    
    /// @dev Approves/unnapproves a Validator contract to verify signatures on signer's behalf.
    /// @param validatorAddress Address of Validator contract.
    /// @param approval Approval or disapproval of  Validator contract.
    function setSignatureValidatorApproval(
        address validatorAddress,
        bool approval
    )
        external;

    /// @dev Verifies that a signature is valid.
    /// @param hash Message hash that is signed.
    /// @param signerAddress Address of signer.
    /// @param signature Proof of signing.
    /// @return Validity of order signature.
    function isValidSignature(
        bytes32 hash,
        address signerAddress,
        bytes memory signature
    )
        public
        view
        returns (bool isValid);
}



contract MSignatureValidator is
    ISignatureValidator
{
    event SignatureValidatorApproval(
        address indexed signerAddress,     // Address that approves or disapproves a contract to verify signatures.
        address indexed validatorAddress,  // Address of signature validator contract.
        bool approved                      // Approval or disapproval of validator contract.
    );

    // Allowed signature types.
    enum SignatureType {
        Illegal,         // 0x00, default value
        Invalid,         // 0x01
        EIP712,          // 0x02
        EthSign,         // 0x03
        Wallet,          // 0x04
        Validator,       // 0x05
        PreSigned,       // 0x06
        NSignatureTypes  // 0x07, number of signature types. Always leave at end.
    }

    /// @dev Verifies signature using logic defined by Wallet contract.
    /// @param hash Any 32 byte hash.
    /// @param walletAddress Address that should have signed the given hash
    ///                      and defines its own signature verification method.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidWalletSignature(
        bytes32 hash,
        address walletAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid);

    /// @dev Verifies signature using logic defined by Validator contract.
    /// @param validatorAddress Address of validator contract.
    /// @param hash Any 32 byte hash.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidValidatorSignature(
        address validatorAddress,
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;


contract ITransactions {

    /// @dev Executes an exchange method call in the context of signer.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @param signature Proof of signer transaction by signer.
    function executeTransaction(
        uint256 salt,
        address signerAddress,
        bytes data,
        bytes signature
    )
        external;
}



contract MTransactions is
    ITransactions
{
    // Hash for the EIP712 ZeroEx Transaction Schema
    bytes32 constant internal EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH = keccak256(abi.encodePacked(
        "ZeroExTransaction(",
        "uint256 salt,",
        "address signerAddress,",
        "bytes data",
        ")"
    ));

    /// @dev Calculates EIP712 hash of the Transaction.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @return EIP712 hash of the Transaction.
    function hashZeroExTransaction(
        uint256 salt,
        address signerAddress,
        bytes memory data
    )
        internal
        pure
        returns (bytes32 result);

    /// @dev The current function will be called in the context of this address (either 0x transaction signer or `msg.sender`).
    ///      If calling a fill function, this address will represent the taker.
    ///      If calling a cancel function, this address will represent the maker.
    /// @return Signer of 0x transaction if entry point is `executeTransaction`.
    ///         `msg.sender` if entry point is any other function.
    function getCurrentContextAddress()
        internal
        view
        returns (address);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract IAssetProxyDispatcher {

    /// @dev Registers an asset proxy to its asset proxy id.
    ///      Once an asset proxy is registered, it cannot be unregistered.
    /// @param assetProxy Address of new asset proxy to register.
    function registerAssetProxy(address assetProxy)
        external;

    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address);
}



contract MAssetProxyDispatcher is
    IAssetProxyDispatcher
{
    // Logs registration of new asset proxy
    event AssetProxyRegistered(
        bytes4 id,              // Id of new registered AssetProxy.
        address assetProxy      // Address of new registered AssetProxy.
    );

    /// @dev Forwards arguments to assetProxy and calls `transferFrom`. Either succeeds or throws.
    /// @param assetData Byte array encoded for the asset.
    /// @param from Address to transfer token from.
    /// @param to Address to transfer token to.
    /// @param amount Amount of token to transfer.
    function dispatchTransferFrom(
        bytes memory assetData,
        address from,
        address to,
        uint256 amount
    )
        internal;
}



contract MixinExchangeCore is
    ReentrancyGuard,
    LibConstants,
    LibMath,
    LibOrder,
    LibFillResults,
    MAssetProxyDispatcher,
    MExchangeCore,
    MSignatureValidator,
    MTransactions
{
    // Mapping of orderHash => amount of takerAsset already bought by maker
    mapping (bytes32 => uint256) public filled;

    // Mapping of orderHash => cancelled
    mapping (bytes32 => bool) public cancelled;

    // Mapping of makerAddress => senderAddress => lowest salt an order can have in order to be fillable
    // Orders with specified senderAddress and with a salt less than their epoch are considered cancelled
    mapping (address => mapping (address => uint256)) public orderEpoch;

    /// @dev Cancels all orders created by makerAddress with a salt less than or equal to the targetOrderEpoch
    ///      and senderAddress equal to msg.sender (or null address if msg.sender == makerAddress).
    /// @param targetOrderEpoch Orders created with a salt less or equal to this value will be cancelled.
    function cancelOrdersUpTo(uint256 targetOrderEpoch)
        external
        nonReentrant
    {
        address makerAddress = getCurrentContextAddress();
        // If this function is called via `executeTransaction`, we only update the orderEpoch for the makerAddress/msg.sender combination.
        // This allows external filter contracts to add rules to how orders are cancelled via this function.
        address senderAddress = makerAddress == msg.sender ? address(0) : msg.sender;

        // orderEpoch is initialized to 0, so to cancelUpTo we need salt + 1
        uint256 newOrderEpoch = targetOrderEpoch + 1;
        uint256 oldOrderEpoch = orderEpoch[makerAddress][senderAddress];

        // Ensure orderEpoch is monotonically increasing
        require(
            newOrderEpoch > oldOrderEpoch,
            "INVALID_NEW_ORDER_EPOCH"
        );

        // Update orderEpoch
        orderEpoch[makerAddress][senderAddress] = newOrderEpoch;
        emit CancelUpTo(
            makerAddress,
            senderAddress,
            newOrderEpoch
        );
    }

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrder(
        Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        nonReentrant
        returns (FillResults memory fillResults)
    {
        fillResults = fillOrderInternal(
            order,
            takerAssetFillAmount,
            signature
        );
        return fillResults;
    }

    /// @dev After calling, the order can not be filled anymore.
    ///      Throws if order is invalid or sender does not have permission to cancel.
    /// @param order Order to cancel. Order must be OrderStatus.FILLABLE.
    function cancelOrder(Order memory order)
        public
        nonReentrant
    {
        cancelOrderInternal(order);
    }

    /// @dev Gets information about an order: status, hash, and amount filled.
    /// @param order Order to gather information on.
    /// @return OrderInfo Information about the order and its state.
    ///         See LibOrder.OrderInfo for a complete description.
    function getOrderInfo(Order memory order)
        public
        view
        returns (OrderInfo memory orderInfo)
    {
        // Compute the order hash
        orderInfo.orderHash = getOrderHash(order);

        // Fetch filled amount
        orderInfo.orderTakerAssetFilledAmount = filled[orderInfo.orderHash];

        // If order.makerAssetAmount is zero, we also reject the order.
        // While the Exchange contract handles them correctly, they create
        // edge cases in the supporting infrastructure because they have
        // an 'infinite' price when computed by a simple division.
        if (order.makerAssetAmount == 0) {
            orderInfo.orderStatus = uint8(OrderStatus.INVALID_MAKER_ASSET_AMOUNT);
            return orderInfo;
        }

        // If order.takerAssetAmount is zero, then the order will always
        // be considered filled because 0 == takerAssetAmount == orderTakerAssetFilledAmount
        // Instead of distinguishing between unfilled and filled zero taker
        // amount orders, we choose not to support them.
        if (order.takerAssetAmount == 0) {
            orderInfo.orderStatus = uint8(OrderStatus.INVALID_TAKER_ASSET_AMOUNT);
            return orderInfo;
        }

        // Validate order availability
        if (orderInfo.orderTakerAssetFilledAmount >= order.takerAssetAmount) {
            orderInfo.orderStatus = uint8(OrderStatus.FULLY_FILLED);
            return orderInfo;
        }

        // Validate order expiration
        // solhint-disable-next-line not-rely-on-time
        if (block.timestamp >= order.expirationTimeSeconds) {
            orderInfo.orderStatus = uint8(OrderStatus.EXPIRED);
            return orderInfo;
        }

        // Check if order has been cancelled
        if (cancelled[orderInfo.orderHash]) {
            orderInfo.orderStatus = uint8(OrderStatus.CANCELLED);
            return orderInfo;
        }
        if (orderEpoch[order.makerAddress][order.senderAddress] > order.salt) {
            orderInfo.orderStatus = uint8(OrderStatus.CANCELLED);
            return orderInfo;
        }

        // All other statuses are ruled out: order is Fillable
        orderInfo.orderStatus = uint8(OrderStatus.FILLABLE);
        return orderInfo;
    }

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderInternal(
        Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (FillResults memory fillResults)
    {
        // Fetch order info
        OrderInfo memory orderInfo = getOrderInfo(order);

        // Fetch taker address
        address takerAddress = getCurrentContextAddress();

        // Assert that the order is fillable by taker
        assertFillableOrder(
            order,
            orderInfo,
            takerAddress,
            signature
        );

        // Get amount of takerAsset to fill
        uint256 remainingTakerAssetAmount = safeSub(order.takerAssetAmount, orderInfo.orderTakerAssetFilledAmount);
        uint256 takerAssetFilledAmount = min256(takerAssetFillAmount, remainingTakerAssetAmount);

        // Validate context
        assertValidFill(
            order,
            orderInfo,
            takerAssetFillAmount,
            takerAssetFilledAmount,
            fillResults.makerAssetFilledAmount
        );

        // Compute proportional fill amounts
        fillResults = calculateFillResults(order, takerAssetFilledAmount);

        // Update exchange internal state
        updateFilledState(
            order,
            takerAddress,
            orderInfo.orderHash,
            orderInfo.orderTakerAssetFilledAmount,
            fillResults
        );

        // Settle order
        settleOrder(
            order,
            takerAddress,
            fillResults
        );

        return fillResults;
    }

    /// @dev After calling, the order can not be filled anymore.
    ///      Throws if order is invalid or sender does not have permission to cancel.
    /// @param order Order to cancel. Order must be OrderStatus.FILLABLE.
    function cancelOrderInternal(Order memory order)
        internal
    {
        // Fetch current order status
        OrderInfo memory orderInfo = getOrderInfo(order);

        // Validate context
        assertValidCancel(order, orderInfo);

        // Perform cancel
        updateCancelledState(order, orderInfo.orderHash);
    }

    /// @dev Updates state with results of a fill order.
    /// @param order that was filled.
    /// @param takerAddress Address of taker who filled the order.
    /// @param orderTakerAssetFilledAmount Amount of order already filled.
    function updateFilledState(
        Order memory order,
        address takerAddress,
        bytes32 orderHash,
        uint256 orderTakerAssetFilledAmount,
        FillResults memory fillResults
    )
        internal
    {
        // Update state
        filled[orderHash] = safeAdd(orderTakerAssetFilledAmount, fillResults.takerAssetFilledAmount);

        // Log order
        emit Fill(
            order.makerAddress,
            order.feeRecipientAddress,
            takerAddress,
            msg.sender,
            fillResults.makerAssetFilledAmount,
            fillResults.takerAssetFilledAmount,
            fillResults.makerFeePaid,
            fillResults.takerFeePaid,
            orderHash,
            order.makerAssetData,
            order.takerAssetData
        );
    }

    /// @dev Updates state with results of cancelling an order.
    ///      State is only updated if the order is currently fillable.
    ///      Otherwise, updating state would have no effect.
    /// @param order that was cancelled.
    /// @param orderHash Hash of order that was cancelled.
    function updateCancelledState(
        Order memory order,
        bytes32 orderHash
    )
        internal
    {
        // Perform cancel
        cancelled[orderHash] = true;

        // Log cancel
        emit Cancel(
            order.makerAddress,
            order.feeRecipientAddress,
            msg.sender,
            orderHash,
            order.makerAssetData,
            order.takerAssetData
        );
    }

    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    /// @param takerAddress Address of order taker.
    /// @param signature Proof that the orders was created by its maker.
    function assertFillableOrder(
        Order memory order,
        OrderInfo memory orderInfo,
        address takerAddress,
        bytes memory signature
    )
        internal
        view
    {
        // An order can only be filled if its status is FILLABLE.
        require(
            orderInfo.orderStatus == uint8(OrderStatus.FILLABLE),
            "ORDER_UNFILLABLE"
        );

        // Validate sender is allowed to fill this order
        if (order.senderAddress != address(0)) {
            require(
                order.senderAddress == msg.sender,
                "INVALID_SENDER"
            );
        }

        // Validate taker is allowed to fill this order
        if (order.takerAddress != address(0)) {
            require(
                order.takerAddress == takerAddress,
                "INVALID_TAKER"
            );
        }

        // Validate Maker signature (check only if first time seen)
        if (orderInfo.orderTakerAssetFilledAmount == 0) {
            require(
                isValidSignature(
                    orderInfo.orderHash,
                    order.makerAddress,
                    signature
                ),
                "INVALID_ORDER_SIGNATURE"
            );
        }
    }

    /// @dev Validates context for fillOrder. Succeeds or throws.
    /// @param order to be filled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    /// @param takerAssetFillAmount Desired amount of order to fill by taker.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @param makerAssetFilledAmount Amount of makerAsset that will be transfered.
    function assertValidFill(
        Order memory order,
        OrderInfo memory orderInfo,
        uint256 takerAssetFillAmount,  // TODO: use FillResults
        uint256 takerAssetFilledAmount,
        uint256 makerAssetFilledAmount
    )
        internal
        view
    {
        // Revert if fill amount is invalid
        // TODO: reconsider necessity for v2.1
        require(
            takerAssetFillAmount != 0,
            "INVALID_TAKER_AMOUNT"
        );

        // Make sure taker does not pay more than desired amount
        // NOTE: This assertion should never fail, it is here
        //       as an extra defence against potential bugs.
        require(
            takerAssetFilledAmount <= takerAssetFillAmount,
            "TAKER_OVERPAY"
        );

        // Make sure order is not overfilled
        // NOTE: This assertion should never fail, it is here
        //       as an extra defence against potential bugs.
        require(
            safeAdd(orderInfo.orderTakerAssetFilledAmount, takerAssetFilledAmount) <= order.takerAssetAmount,
            "ORDER_OVERFILL"
        );

        // Make sure order is filled at acceptable price.
        // The order has an implied price from the makers perspective:
        //    order price = order.makerAssetAmount / order.takerAssetAmount
        // i.e. the number of makerAsset maker is paying per takerAsset. The
        // maker is guaranteed to get this price or a better (lower) one. The
        // actual price maker is getting in this fill is:
        //    fill price = makerAssetFilledAmount / takerAssetFilledAmount
        // We need `fill price <= order price` for the fill to be fair to maker.
        // This amounts to:
        //     makerAssetFilledAmount        order.makerAssetAmount
        //    ------------------------  <=  -----------------------
        //     takerAssetFilledAmount        order.takerAssetAmount
        // or, equivalently:
        //     makerAssetFilledAmount * order.takerAssetAmount <=
        //     order.makerAssetAmount * takerAssetFilledAmount
        // NOTE: This assertion should never fail, it is here
        //       as an extra defence against potential bugs.
        require(
            safeMul(makerAssetFilledAmount, order.takerAssetAmount)
            <=
            safeMul(order.makerAssetAmount, takerAssetFilledAmount),
            "INVALID_FILL_PRICE"
        );
    }

    /// @dev Validates context for cancelOrder. Succeeds or throws.
    /// @param order to be cancelled.
    /// @param orderInfo OrderStatus, orderHash, and amount already filled of order.
    function assertValidCancel(
        Order memory order,
        OrderInfo memory orderInfo
    )
        internal
        view
    {
        // Ensure order is valid
        // An order can only be cancelled if its status is FILLABLE.
        require(
            orderInfo.orderStatus == uint8(OrderStatus.FILLABLE),
            "ORDER_UNFILLABLE"
        );

        // Validate sender is allowed to cancel this order
        if (order.senderAddress != address(0)) {
            require(
                order.senderAddress == msg.sender,
                "INVALID_SENDER"
            );
        }

        // Validate transaction signed by maker
        address makerAddress = getCurrentContextAddress();
        require(
            order.makerAddress == makerAddress,
            "INVALID_MAKER"
        );
    }

    /// @dev Calculates amounts filled and fees paid by maker and taker.
    /// @param order to be filled.
    /// @param takerAssetFilledAmount Amount of takerAsset that will be filled.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function calculateFillResults(
        Order memory order,
        uint256 takerAssetFilledAmount
    )
        internal
        pure
        returns (FillResults memory fillResults)
    {
        // Compute proportional transfer amounts
        fillResults.takerAssetFilledAmount = takerAssetFilledAmount;
        fillResults.makerAssetFilledAmount = safeGetPartialAmountFloor(
            takerAssetFilledAmount,
            order.takerAssetAmount,
            order.makerAssetAmount
        );
        fillResults.makerFeePaid = safeGetPartialAmountFloor(
            fillResults.makerAssetFilledAmount,
            order.makerAssetAmount,
            order.makerFee
        );
        fillResults.takerFeePaid = safeGetPartialAmountFloor(
            takerAssetFilledAmount,
            order.takerAssetAmount,
            order.takerFee
        );

        return fillResults;
    }

    /// @dev Settles an order by transferring assets between counterparties.
    /// @param order Order struct containing order specifications.
    /// @param takerAddress Address selling takerAsset and buying makerAsset.
    /// @param fillResults Amounts to be filled and fees paid by maker and taker.
    function settleOrder(
        LibOrder.Order memory order,
        address takerAddress,
        LibFillResults.FillResults memory fillResults
    )
        private
    {
        bytes memory zrxAssetData = ZRX_ASSET_DATA;
        dispatchTransferFrom(
            order.makerAssetData,
            order.makerAddress,
            takerAddress,
            fillResults.makerAssetFilledAmount
        );
        dispatchTransferFrom(
            order.takerAssetData,
            takerAddress,
            order.makerAddress,
            fillResults.takerAssetFilledAmount
        );
        dispatchTransferFrom(
            zrxAssetData,
            order.makerAddress,
            order.feeRecipientAddress,
            fillResults.makerFeePaid
        );
        dispatchTransferFrom(
            zrxAssetData,
            takerAddress,
            order.feeRecipientAddress,
            fillResults.takerFeePaid
        );
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


library LibBytes {

    using LibBytes for bytes;

    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }

    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }

            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)

                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)

                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)

                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)

                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }

    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        require(
            from <= to,
            "FROM_LESS_THAN_TO_REQUIRED"
        );
        require(
            to < b.length,
            "TO_LESS_THAN_LENGTH_REQUIRED"
        );
        
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    
    /// @dev Returns a slice from a byte array without preserving the input.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    /// @dev When `from == 0`, the original array will match the slice. In other cases its state will be corrupted.
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        require(
            from <= to,
            "FROM_LESS_THAN_TO_REQUIRED"
        );
        require(
            to < b.length,
            "TO_LESS_THAN_LENGTH_REQUIRED"
        );
        
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }

    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        require(
            b.length > 0,
            "GREATER_THAN_ZERO_LENGTH_REQUIRED"
        );

        // Store last byte.
        result = b[b.length - 1];

        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }

    /// @dev Pops the last 20 bytes off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return The 20 byte address that was popped off.
    function popLast20Bytes(bytes memory b)
        internal
        pure
        returns (address result)
    {
        require(
            b.length >= 20,
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );

        // Store last 20 bytes.
        result = readAddress(b, b.length - 20);

        assembly {
            // Subtract 20 from byte array length.
            let newLen := sub(mload(b), 20)
            mstore(b, newLen)
        }
        return result;
    }

    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }

    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        require(
            b.length >= index + 20,  // 20 is length of address
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );

        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;

        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }

    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        require(
            b.length >= index + 20,  // 20 is length of address
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );

        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;

        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.

            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)

            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }

    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        require(
            b.length >= index + 32,
            "GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED"
        );

        // Arrays are prefixed by a 256 bit length parameter
        index += 32;

        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }

    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        require(
            b.length >= index + 32,
            "GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED"
        );

        // Arrays are prefixed by a 256 bit length parameter
        index += 32;

        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }

    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }

    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }

    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        require(
            b.length >= index + 4,
            "GREATER_OR_EQUAL_TO_4_LENGTH_REQUIRED"
        );

        // Arrays are prefixed by a 32 byte length field
        index += 32;

        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }

    /// @dev Reads nested bytes from a specific position.
    /// @dev NOTE: the returned value overlaps with the input value.
    ///            Both should be treated as immutable.
    /// @param b Byte array containing nested bytes.
    /// @param index Index of nested bytes.
    /// @return result Nested bytes.
    function readBytesWithLength(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Read length of nested bytes
        uint256 nestedBytesLength = readUint256(b, index);
        index += 32;

        // Assert length of <b> is valid, given
        // length of nested bytes
        require(
            b.length >= index + nestedBytesLength,
            "GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED"
        );
        
        // Return a pointer to the byte array as it exists inside `b`
        assembly {
            result := add(b, index)
        }
        return result;
    }

    /// @dev Inserts bytes at a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes to insert.
    function writeBytesWithLength(
        bytes memory b,
        uint256 index,
        bytes memory input
    )
        internal
        pure
    {
        // Assert length of <b> is valid, given
        // length of input
        require(
            b.length >= index + 32 + input.length,  // 32 bytes to store length
            "GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED"
        );

        // Copy <input> into <b>
        memCopy(
            b.contentAddress() + index,
            input.rawAddress(), // includes length of <input>
            input.length + 32   // +32 bytes to store <input> length
        );
    }

    /// @dev Performs a deep copy of a byte array onto another byte array of greater than or equal length.
    /// @param dest Byte array that will be overwritten with source bytes.
    /// @param source Byte array to copy onto dest bytes.
    function deepCopyBytes(
        bytes memory dest,
        bytes memory source
    )
        internal
        pure
    {
        uint256 sourceLen = source.length;
        // Dest length must be >= source length, or some bytes would not be copied.
        require(
            dest.length >= sourceLen,
            "GREATER_OR_EQUAL_TO_SOURCE_BYTES_LENGTH_REQUIRED"
        );
        memCopy(
            dest.contentAddress(),
            source.contentAddress(),
            sourceLen
        );
    }
}




/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract IWallet {

    /// @dev Verifies that a signature is valid.
    /// @param hash Message hash that is signed.
    /// @param signature Proof of signing.
    /// @return Validity of order signature.
    function isValidSignature(
        bytes32 hash,
        bytes signature
    )
        external
        view
        returns (bool isValid);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;


contract IValidator {

    /// @dev Verifies that a signature is valid.
    /// @param hash Message hash that is signed.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof of signing.
    /// @return Validity of order signature.
    function isValidSignature(
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        external
        view
        returns (bool isValid);
}



contract MixinSignatureValidator is
    ReentrancyGuard,
    MSignatureValidator,
    MTransactions
{
    using LibBytes for bytes;

    // Mapping of hash => signer => signed
    mapping (bytes32 => mapping (address => bool)) public preSigned;

    // Mapping of signer => validator => approved
    mapping (address => mapping (address => bool)) public allowedValidators;

    /// @dev Approves a hash on-chain using any valid signature type.
    ///      After presigning a hash, the preSign signature type will become valid for that hash and signer.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    function preSign(
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        external
    {
        if (signerAddress != msg.sender) {
            require(
                isValidSignature(
                    hash,
                    signerAddress,
                    signature
                ),
                "INVALID_SIGNATURE"
            );
        }
        preSigned[hash][signerAddress] = true;
    }

    /// @dev Approves/unnapproves a Validator contract to verify signatures on signer's behalf.
    /// @param validatorAddress Address of Validator contract.
    /// @param approval Approval or disapproval of  Validator contract.
    function setSignatureValidatorApproval(
        address validatorAddress,
        bool approval
    )
        external
        nonReentrant
    {
        address signerAddress = getCurrentContextAddress();
        allowedValidators[signerAddress][validatorAddress] = approval;
        emit SignatureValidatorApproval(
            signerAddress,
            validatorAddress,
            approval
        );
    }

    /// @dev Verifies that a hash has been signed by the given signer.
    /// @param hash Any 32 byte hash.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidSignature(
        bytes32 hash,
        address signerAddress,
        bytes memory signature
    )
        public
        view
        returns (bool isValid)
    {
        require(
            signature.length > 0,
            "LENGTH_GREATER_THAN_0_REQUIRED"
        );

        // Pop last byte off of signature byte array.
        uint8 signatureTypeRaw = uint8(signature.popLastByte());

        // Ensure signature is supported
        require(
            signatureTypeRaw < uint8(SignatureType.NSignatureTypes),
            "SIGNATURE_UNSUPPORTED"
        );

        SignatureType signatureType = SignatureType(signatureTypeRaw);

        // Variables are not scoped in Solidity.
        uint8 v;
        bytes32 r;
        bytes32 s;
        address recovered;

        // Always illegal signature.
        // This is always an implicit option since a signer can create a
        // signature array with invalid type or length. We may as well make
        // it an explicit option. This aids testing and analysis. It is
        // also the initialization value for the enum type.
        if (signatureType == SignatureType.Illegal) {
            revert("SIGNATURE_ILLEGAL");

        // Always invalid signature.
        // Like Illegal, this is always implicitly available and therefore
        // offered explicitly. It can be implicitly created by providing
        // a correctly formatted but incorrect signature.
        } else if (signatureType == SignatureType.Invalid) {
            require(
                signature.length == 0,
                "LENGTH_0_REQUIRED"
            );
            isValid = false;
            return isValid;

        // Signature using EIP712
        } else if (signatureType == SignatureType.EIP712) {
            require(
                signature.length == 65,
                "LENGTH_65_REQUIRED"
            );
            v = uint8(signature[0]);
            r = signature.readBytes32(1);
            s = signature.readBytes32(33);
            recovered = ecrecover(
                hash,
                v,
                r,
                s
            );
            isValid = signerAddress == recovered;
            return isValid;

        // Signed using web3.eth_sign
        } else if (signatureType == SignatureType.EthSign) {
            require(
                signature.length == 65,
                "LENGTH_65_REQUIRED"
            );
            v = uint8(signature[0]);
            r = signature.readBytes32(1);
            s = signature.readBytes32(33);
            recovered = ecrecover(
                keccak256(abi.encodePacked(
                    "\x19Ethereum Signed Message:\n32",
                    hash
                )),
                v,
                r,
                s
            );
            isValid = signerAddress == recovered;
            return isValid;

        // Signature verified by wallet contract.
        // If used with an order, the maker of the order is the wallet contract.
        } else if (signatureType == SignatureType.Wallet) {
            isValid = isValidWalletSignature(
                hash,
                signerAddress,
                signature
            );
            return isValid;

        // Signature verified by validator contract.
        // If used with an order, the maker of the order can still be an EOA.
        // A signature using this type should be encoded as:
        // | Offset   | Length | Contents                        |
        // | 0x00     | x      | Signature to validate           |
        // | 0x00 + x | 20     | Address of validator contract   |
        // | 0x14 + x | 1      | Signature type is always "\x06" |
        } else if (signatureType == SignatureType.Validator) {
            // Pop last 20 bytes off of signature byte array.
            address validatorAddress = signature.popLast20Bytes();

            // Ensure signer has approved validator.
            if (!allowedValidators[signerAddress][validatorAddress]) {
                return false;
            }
            isValid = isValidValidatorSignature(
                validatorAddress,
                hash,
                signerAddress,
                signature
            );
            return isValid;

        // Signer signed hash previously using the preSign function.
        } else if (signatureType == SignatureType.PreSigned) {
            isValid = preSigned[hash][signerAddress];
            return isValid;
        }

        // Anything else is illegal (We do not return false because
        // the signature may actually be valid, just not in a format
        // that we currently support. In this case returning false
        // may lead the caller to incorrectly believe that the
        // signature was invalid.)
        revert("SIGNATURE_UNSUPPORTED");
    }

    /// @dev Verifies signature using logic defined by Wallet contract.
    /// @param hash Any 32 byte hash.
    /// @param walletAddress Address that should have signed the given hash
    ///                      and defines its own signature verification method.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if signature is valid for given wallet..
    function isValidWalletSignature(
        bytes32 hash,
        address walletAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid)
    {
        bytes memory calldata = abi.encodeWithSelector(
            IWallet(walletAddress).isValidSignature.selector,
            hash,
            signature
        );
        bytes32 magic_salt = bytes32(bytes4(keccak256("isValidWalletSignature(bytes32,address,bytes)")));
        assembly {
            if iszero(extcodesize(walletAddress)) {
                // Revert with `Error("WALLET_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000c57414c4c45545f4552524f5200000000000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            let cdStart := add(calldata, 32)
            let success := staticcall(
                gas,              // forward all gas
                walletAddress,    // address of Wallet contract
                cdStart,          // pointer to start of input
                mload(calldata),  // length of input
                cdStart,          // write output over input
                32                // output size is 32 bytes
            )

            if iszero(eq(returndatasize(), 32)) {
                // Revert with `Error("WALLET_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000c57414c4c45545f4552524f5200000000000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            switch success
            case 0 {
                // Revert with `Error("WALLET_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000c57414c4c45545f4552524f5200000000000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }
            case 1 {
                // Signature is valid if call did not revert and returned true
                isValid := eq(
                    and(mload(cdStart), 0xffffffff00000000000000000000000000000000000000000000000000000000),
                    and(magic_salt, 0xffffffff00000000000000000000000000000000000000000000000000000000)
                )
            }
        }
        return isValid;
    }

    /// @dev Verifies signature using logic defined by Validator contract.
    /// @param validatorAddress Address of validator contract.
    /// @param hash Any 32 byte hash.
    /// @param signerAddress Address that should have signed the given hash.
    /// @param signature Proof that the hash has been signed by signer.
    /// @return True if the address recovered from the provided signature matches the input signer address.
    function isValidValidatorSignature(
        address validatorAddress,
        bytes32 hash,
        address signerAddress,
        bytes signature
    )
        internal
        view
        returns (bool isValid)
    {
        bytes memory calldata = abi.encodeWithSelector(
            IValidator(signerAddress).isValidSignature.selector,
            hash,
            signerAddress,
            signature
        );
        bytes32 magic_salt = bytes32(bytes4(keccak256("isValidValidatorSignature(address,bytes32,address,bytes)")));
        assembly {
            if iszero(extcodesize(validatorAddress)) {
                // Revert with `Error("VALIDATOR_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f56414c494441544f525f4552524f5200000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            let cdStart := add(calldata, 32)
            let success := staticcall(
                gas,               // forward all gas
                validatorAddress,  // address of Validator contract
                cdStart,           // pointer to start of input
                mload(calldata),   // length of input
                cdStart,           // write output over input
                32                 // output size is 32 bytes
            )

            if iszero(eq(returndatasize(), 32)) {
                // Revert with `Error("VALIDATOR_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f56414c494441544f525f4552524f5200000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            switch success
            case 0 {
                // Revert with `Error("VALIDATOR_ERROR")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f56414c494441544f525f4552524f5200000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }
            case 1 {
                // Signature is valid if call did not revert and returned true
                isValid := eq(
                    and(mload(cdStart), 0xffffffff00000000000000000000000000000000000000000000000000000000),
                    and(magic_salt, 0xffffffff00000000000000000000000000000000000000000000000000000000)
                )
            }
        }
        return isValid;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;





/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;




contract LibAbiEncoder {

    /// @dev ABI encodes calldata for `fillOrder`.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return ABI encoded calldata for `fillOrder`.
    function abiEncodeFillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        pure
        returns (bytes memory fillOrderCalldata)
    {
        // We need to call MExchangeCore.fillOrder using a delegatecall in
        // assembly so that we can intercept a call that throws. For this, we
        // need the input encoded in memory in the Ethereum ABIv2 format [1].

        // | Area     | Offset | Length  | Contents                                    |
        // | -------- |--------|---------|-------------------------------------------- |
        // | Header   | 0x00   | 4       | function selector                           |
        // | Params   |        | 3 * 32  | function parameters:                        |
        // |          | 0x00   |         |   1. offset to order (*)                    |
        // |          | 0x20   |         |   2. takerAssetFillAmount                   |
        // |          | 0x40   |         |   3. offset to signature (*)                |
        // | Data     |        | 12 * 32 | order:                                      |
        // |          | 0x000  |         |   1.  senderAddress                         |
        // |          | 0x020  |         |   2.  makerAddress                          |
        // |          | 0x040  |         |   3.  takerAddress                          |
        // |          | 0x060  |         |   4.  feeRecipientAddress                   |
        // |          | 0x080  |         |   5.  makerAssetAmount                      |
        // |          | 0x0A0  |         |   6.  takerAssetAmount                      |
        // |          | 0x0C0  |         |   7.  makerFeeAmount                        |
        // |          | 0x0E0  |         |   8.  takerFeeAmount                        |
        // |          | 0x100  |         |   9.  expirationTimeSeconds                 |
        // |          | 0x120  |         |   10. salt                                  |
        // |          | 0x140  |         |   11. Offset to makerAssetData (*)          |
        // |          | 0x160  |         |   12. Offset to takerAssetData (*)          |
        // |          | 0x180  | 32      | makerAssetData Length                       |
        // |          | 0x1A0  | **      | makerAssetData Contents                     |
        // |          | 0x1C0  | 32      | takerAssetData Length                       |
        // |          | 0x1E0  | **      | takerAssetData Contents                     |
        // |          | 0x200  | 32      | signature Length                            |
        // |          | 0x220  | **      | signature Contents                          |

        // * Offsets are calculated from the beginning of the current area: Header, Params, Data:
        //     An offset stored in the Params area is calculated from the beginning of the Params section.
        //     An offset stored in the Data area is calculated from the beginning of the Data section.

        // ** The length of dynamic array contents are stored in the field immediately preceeding the contents.

        // [1]: https://solidity.readthedocs.io/en/develop/abi-spec.html

        assembly {

            // Areas below may use the following variables:
            //   1. <area>Start   -- Start of this area in memory
            //   2. <area>End     -- End of this area in memory. This value may
            //                       be precomputed (before writing contents),
            //                       or it may be computed as contents are written.
            //   3. <area>Offset  -- Current offset into area. If an area's End
            //                       is precomputed, this variable tracks the
            //                       offsets of contents as they are written.

            /////// Setup Header Area ///////
            // Load free memory pointer
            fillOrderCalldata := mload(0x40)
            // bytes4(keccak256("fillOrder((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),uint256,bytes)"))
            // = 0xb4be83d5
            // Leave 0x20 bytes to store the length
            mstore(add(fillOrderCalldata, 0x20), 0xb4be83d500000000000000000000000000000000000000000000000000000000)
            let headerAreaEnd := add(fillOrderCalldata, 0x24)

            /////// Setup Params Area ///////
            // This area is preallocated and written to later.
            // This is because we need to fill in offsets that have not yet been calculated.
            let paramsAreaStart := headerAreaEnd
            let paramsAreaEnd := add(paramsAreaStart, 0x60)
            let paramsAreaOffset := paramsAreaStart

            /////// Setup Data Area ///////
            let dataAreaStart := paramsAreaEnd
            let dataAreaEnd := dataAreaStart

            // Offset from the source data we're reading from
            let sourceOffset := order
            // arrayLenBytes and arrayLenWords track the length of a dynamically-allocated bytes array.
            let arrayLenBytes := 0
            let arrayLenWords := 0

            /////// Write order Struct ///////
            // Write memory location of Order, relative to the start of the
            // parameter list, then increment the paramsAreaOffset respectively.
            mstore(paramsAreaOffset, sub(dataAreaEnd, paramsAreaStart))
            paramsAreaOffset := add(paramsAreaOffset, 0x20)

            // Write values for each field in the order
            // It would be nice to use a loop, but we save on gas by writing
            // the stores sequentially.
            mstore(dataAreaEnd, mload(sourceOffset))                            // makerAddress
            mstore(add(dataAreaEnd, 0x20), mload(add(sourceOffset, 0x20)))      // takerAddress
            mstore(add(dataAreaEnd, 0x40), mload(add(sourceOffset, 0x40)))      // feeRecipientAddress
            mstore(add(dataAreaEnd, 0x60), mload(add(sourceOffset, 0x60)))      // senderAddress
            mstore(add(dataAreaEnd, 0x80), mload(add(sourceOffset, 0x80)))      // makerAssetAmount
            mstore(add(dataAreaEnd, 0xA0), mload(add(sourceOffset, 0xA0)))      // takerAssetAmount
            mstore(add(dataAreaEnd, 0xC0), mload(add(sourceOffset, 0xC0)))      // makerFeeAmount
            mstore(add(dataAreaEnd, 0xE0), mload(add(sourceOffset, 0xE0)))      // takerFeeAmount
            mstore(add(dataAreaEnd, 0x100), mload(add(sourceOffset, 0x100)))    // expirationTimeSeconds
            mstore(add(dataAreaEnd, 0x120), mload(add(sourceOffset, 0x120)))    // salt
            mstore(add(dataAreaEnd, 0x140), mload(add(sourceOffset, 0x140)))    // Offset to makerAssetData
            mstore(add(dataAreaEnd, 0x160), mload(add(sourceOffset, 0x160)))    // Offset to takerAssetData
            dataAreaEnd := add(dataAreaEnd, 0x180)
            sourceOffset := add(sourceOffset, 0x180)

            // Write offset to <order.makerAssetData>
            mstore(add(dataAreaStart, mul(10, 0x20)), sub(dataAreaEnd, dataAreaStart))

            // Calculate length of <order.makerAssetData>
            sourceOffset := mload(add(order, 0x140)) // makerAssetData
            arrayLenBytes := mload(sourceOffset)
            sourceOffset := add(sourceOffset, 0x20)
            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)

            // Write length of <order.makerAssetData>
            mstore(dataAreaEnd, arrayLenBytes)
            dataAreaEnd := add(dataAreaEnd, 0x20)

            // Write contents of <order.makerAssetData>
            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
                mstore(dataAreaEnd, mload(sourceOffset))
                dataAreaEnd := add(dataAreaEnd, 0x20)
                sourceOffset := add(sourceOffset, 0x20)
            }

            // Write offset to <order.takerAssetData>
            mstore(add(dataAreaStart, mul(11, 0x20)), sub(dataAreaEnd, dataAreaStart))

            // Calculate length of <order.takerAssetData>
            sourceOffset := mload(add(order, 0x160)) // takerAssetData
            arrayLenBytes := mload(sourceOffset)
            sourceOffset := add(sourceOffset, 0x20)
            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)

            // Write length of <order.takerAssetData>
            mstore(dataAreaEnd, arrayLenBytes)
            dataAreaEnd := add(dataAreaEnd, 0x20)

            // Write contents of  <order.takerAssetData>
            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
                mstore(dataAreaEnd, mload(sourceOffset))
                dataAreaEnd := add(dataAreaEnd, 0x20)
                sourceOffset := add(sourceOffset, 0x20)
            }

            /////// Write takerAssetFillAmount ///////
            mstore(paramsAreaOffset, takerAssetFillAmount)
            paramsAreaOffset := add(paramsAreaOffset, 0x20)

            /////// Write signature ///////
            // Write offset to paramsArea
            mstore(paramsAreaOffset, sub(dataAreaEnd, paramsAreaStart))

            // Calculate length of signature
            sourceOffset := signature
            arrayLenBytes := mload(sourceOffset)
            sourceOffset := add(sourceOffset, 0x20)
            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)

            // Write length of signature
            mstore(dataAreaEnd, arrayLenBytes)
            dataAreaEnd := add(dataAreaEnd, 0x20)

            // Write contents of signature
            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
                mstore(dataAreaEnd, mload(sourceOffset))
                dataAreaEnd := add(dataAreaEnd, 0x20)
                sourceOffset := add(sourceOffset, 0x20)
            }

            // Set length of calldata
            mstore(fillOrderCalldata, sub(dataAreaEnd, add(fillOrderCalldata, 0x20)))

            // Increment free memory pointer
            mstore(0x40, dataAreaEnd)
        }

        return fillOrderCalldata;
    }
}


/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;



/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;





contract IWrapperFunctions {

    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order LibOrder.Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev Fills an order with specified parameters and ECDSA signature.
    ///      Returns false if the transaction would otherwise revert.
    /// @param order LibOrder.Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderNoThrow(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (LibFillResults.FillResults memory fillResults);

    /// @dev Synchronously executes multiple calls of fillOrder.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function batchFillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrKill.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function batchFillOrKillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Fills an order with specified parameters and ECDSA signature.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function batchFillOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrders(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of makerAsset is bought by taker.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrders(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously executes multiple fill orders in a single transaction until total amount is bought by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (LibFillResults.FillResults memory totalFillResults);

    /// @dev Synchronously cancels multiple orders in a single transaction.
    /// @param orders Array of order specifications.
    function batchCancelOrders(LibOrder.Order[] memory orders)
        public;

    /// @dev Fetches information for all passed in orders
    /// @param orders Array of order specifications.
    /// @return Array of OrderInfo instances that correspond to each order.
    function getOrdersInfo(LibOrder.Order[] memory orders)
        public
        view
        returns (LibOrder.OrderInfo[] memory);
}



contract MWrapperFunctions is 
    IWrapperFunctions
{
    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order LibOrder.Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrderInternal(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (LibFillResults.FillResults memory fillResults);
}



contract MixinWrapperFunctions is
    ReentrancyGuard,
    LibMath,
    LibFillResults,
    LibAbiEncoder,
    MExchangeCore,
    MWrapperFunctions
{
    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrder(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        nonReentrant
        returns (FillResults memory fillResults)
    {
        fillResults = fillOrKillOrderInternal(
            order,
            takerAssetFillAmount,
            signature
        );
        return fillResults;
    }

    /// @dev Fills the input order.
    ///      Returns false if the transaction would otherwise revert.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return Amounts filled and fees paid by maker and taker.
    function fillOrderNoThrow(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        public
        returns (FillResults memory fillResults)
    {
        // ABI encode calldata for `fillOrder`
        bytes memory fillOrderCalldata = abiEncodeFillOrder(
            order,
            takerAssetFillAmount,
            signature
        );

        // Delegate to `fillOrder` and handle any exceptions gracefully
        assembly {
            let success := delegatecall(
                gas,                                // forward all gas
                address,                            // call address of this contract
                add(fillOrderCalldata, 32),         // pointer to start of input (skip array length in first 32 bytes)
                mload(fillOrderCalldata),           // length of input
                fillOrderCalldata,                  // write output over input
                128                                 // output size is 128 bytes
            )
            if success {
                mstore(fillResults, mload(fillOrderCalldata))
                mstore(add(fillResults, 32), mload(add(fillOrderCalldata, 32)))
                mstore(add(fillResults, 64), mload(add(fillOrderCalldata, 64)))
                mstore(add(fillResults, 96), mload(add(fillOrderCalldata, 96)))
            }
        }
        // fillResults values will be 0 by default if call was unsuccessful
        return fillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    ///         NOTE: makerAssetFilledAmount and takerAssetFilledAmount may include amounts filled of different assets.
    function batchFillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            FillResults memory singleFillResults = fillOrderInternal(
                orders[i],
                takerAssetFillAmounts[i],
                signatures[i]
            );
            addFillResults(totalFillResults, singleFillResults);
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrKill.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    ///         NOTE: makerAssetFilledAmount and takerAssetFilledAmount may include amounts filled of different assets.
    function batchFillOrKillOrders(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            FillResults memory singleFillResults = fillOrKillOrderInternal(
                orders[i],
                takerAssetFillAmounts[i],
                signatures[i]
            );
            addFillResults(totalFillResults, singleFillResults);
        }
        return totalFillResults;
    }

    /// @dev Fills an order with specified parameters and ECDSA signature.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    ///         NOTE: makerAssetFilledAmount and takerAssetFilledAmount may include amounts filled of different assets.
    function batchFillOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256[] memory takerAssetFillAmounts,
        bytes[] memory signatures
    )
        public
        returns (FillResults memory totalFillResults)
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            FillResults memory singleFillResults = fillOrderNoThrow(
                orders[i],
                takerAssetFillAmounts[i],
                signatures[i]
            );
            addFillResults(totalFillResults, singleFillResults);
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been created by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrders(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        bytes memory takerAssetData = orders[0].takerAssetData;
    
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being sold by taker is the same for each order.
            // Rather than passing this in as calldata, we use the takerAssetData from the first order in all later orders.
            orders[i].takerAssetData = takerAssetData;

            // Calculate the remaining amount of takerAsset to sell
            uint256 remainingTakerAssetFillAmount = safeSub(takerAssetFillAmount, totalFillResults.takerAssetFilledAmount);

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderInternal(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of takerAsset has been sold
            if (totalFillResults.takerAssetFilledAmount >= takerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketSellOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 takerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (FillResults memory totalFillResults)
    {
        bytes memory takerAssetData = orders[0].takerAssetData;

        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being sold by taker is the same for each order.
            // Rather than passing this in as calldata, we use the takerAssetData from the first order in all later orders.
            orders[i].takerAssetData = takerAssetData;

            // Calculate the remaining amount of takerAsset to sell
            uint256 remainingTakerAssetFillAmount = safeSub(takerAssetFillAmount, totalFillResults.takerAssetFilledAmount);

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderNoThrow(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of takerAsset has been sold
            if (totalFillResults.takerAssetFilledAmount >= takerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple calls of fillOrder until total amount of makerAsset is bought by taker.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrders(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        nonReentrant
        returns (FillResults memory totalFillResults)
    {
        bytes memory makerAssetData = orders[0].makerAssetData;

        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being bought by taker is the same for each order.
            // Rather than passing this in as calldata, we copy the makerAssetData from the first order onto all later orders.
            orders[i].makerAssetData = makerAssetData;

            // Calculate the remaining amount of makerAsset to buy
            uint256 remainingMakerAssetFillAmount = safeSub(makerAssetFillAmount, totalFillResults.makerAssetFilledAmount);

            // Convert the remaining amount of makerAsset to buy into remaining amount
            // of takerAsset to sell, assuming entire amount can be sold in the current order
            uint256 remainingTakerAssetFillAmount = getPartialAmountFloor(
                orders[i].takerAssetAmount,
                orders[i].makerAssetAmount,
                remainingMakerAssetFillAmount
            );

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderInternal(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of makerAsset has been bought
            if (totalFillResults.makerAssetFilledAmount >= makerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously executes multiple fill orders in a single transaction until total amount is bought by taker.
    ///      Returns false if the transaction would otherwise revert.
    /// @param orders Array of order specifications.
    /// @param makerAssetFillAmount Desired amount of makerAsset to buy.
    /// @param signatures Proofs that orders have been signed by makers.
    /// @return Amounts filled and fees paid by makers and taker.
    function marketBuyOrdersNoThrow(
        LibOrder.Order[] memory orders,
        uint256 makerAssetFillAmount,
        bytes[] memory signatures
    )
        public
        returns (FillResults memory totalFillResults)
    {
        bytes memory makerAssetData = orders[0].makerAssetData;

        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {

            // We assume that asset being bought by taker is the same for each order.
            // Rather than passing this in as calldata, we copy the makerAssetData from the first order onto all later orders.
            orders[i].makerAssetData = makerAssetData;

            // Calculate the remaining amount of makerAsset to buy
            uint256 remainingMakerAssetFillAmount = safeSub(makerAssetFillAmount, totalFillResults.makerAssetFilledAmount);

            // Convert the remaining amount of makerAsset to buy into remaining amount
            // of takerAsset to sell, assuming entire amount can be sold in the current order
            uint256 remainingTakerAssetFillAmount = getPartialAmountFloor(
                orders[i].takerAssetAmount,
                orders[i].makerAssetAmount,
                remainingMakerAssetFillAmount
            );

            // Attempt to sell the remaining amount of takerAsset
            FillResults memory singleFillResults = fillOrderNoThrow(
                orders[i],
                remainingTakerAssetFillAmount,
                signatures[i]
            );

            // Update amounts filled and fees paid by maker and taker
            addFillResults(totalFillResults, singleFillResults);

            // Stop execution if the entire amount of makerAsset has been bought
            if (totalFillResults.makerAssetFilledAmount >= makerAssetFillAmount) {
                break;
            }
        }
        return totalFillResults;
    }

    /// @dev Synchronously cancels multiple orders in a single transaction.
    /// @param orders Array of order specifications.
    function batchCancelOrders(LibOrder.Order[] memory orders)
        public
        nonReentrant
    {
        uint256 ordersLength = orders.length;
        for (uint256 i = 0; i != ordersLength; i++) {
            cancelOrderInternal(orders[i]);
        }
    }

    /// @dev Fetches information for all passed in orders.
    /// @param orders Array of order specifications.
    /// @return Array of OrderInfo instances that correspond to each order.
    function getOrdersInfo(LibOrder.Order[] memory orders)
        public
        view
        returns (LibOrder.OrderInfo[] memory)
    {
        uint256 ordersLength = orders.length;
        LibOrder.OrderInfo[] memory ordersInfo = new LibOrder.OrderInfo[](ordersLength);
        for (uint256 i = 0; i != ordersLength; i++) {
            ordersInfo[i] = getOrderInfo(orders[i]);
        }
        return ordersInfo;
    }

    /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    function fillOrKillOrderInternal(
        LibOrder.Order memory order,
        uint256 takerAssetFillAmount,
        bytes memory signature
    )
        internal
        returns (FillResults memory fillResults)
    {
        fillResults = fillOrderInternal(
            order,
            takerAssetFillAmount,
            signature
        );
        require(
            fillResults.takerAssetFilledAmount == takerAssetFillAmount,
            "COMPLETE_FILL_FAILED"
        );
        return fillResults;
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

pragma solidity 0.4.24;

pragma solidity 0.4.24;


contract IOwnable {

    function transferOwnership(address newOwner)
        public;
}



contract Ownable is
    IOwnable
{
    address public owner;

    constructor ()
        public
    {
        owner = msg.sender;
    }

    modifier onlyOwner() {
        require(
            msg.sender == owner,
            "ONLY_CONTRACT_OWNER"
        );
        _;
    }

    function transferOwnership(address newOwner)
        public
        onlyOwner
    {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }
}


/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;




contract IAuthorizable is
    IOwnable
{
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory);
}



contract IAssetProxy is
    IAuthorizable
{
    /// @dev Transfers assets. Either succeeds or throws.
    /// @param assetData Byte array encoded for the respective asset proxy.
    /// @param from Address to transfer asset from.
    /// @param to Address to transfer asset to.
    /// @param amount Amount of asset to transfer.
    function transferFrom(
        bytes assetData,
        address from,
        address to,
        uint256 amount
    )
        external;
    
    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4);
}



contract MixinAssetProxyDispatcher is
    Ownable,
    MAssetProxyDispatcher
{
    // Mapping from Asset Proxy Id's to their respective Asset Proxy
    mapping (bytes4 => IAssetProxy) public assetProxies;

    /// @dev Registers an asset proxy to its asset proxy id.
    ///      Once an asset proxy is registered, it cannot be unregistered.
    /// @param assetProxy Address of new asset proxy to register.
    function registerAssetProxy(address assetProxy)
        external
        onlyOwner
    {
        IAssetProxy assetProxyContract = IAssetProxy(assetProxy);

        // Ensure that no asset proxy exists with current id.
        bytes4 assetProxyId = assetProxyContract.getProxyId();
        address currentAssetProxy = assetProxies[assetProxyId];
        require(
            currentAssetProxy == address(0),
            "ASSET_PROXY_ALREADY_EXISTS"
        );

        // Add asset proxy and log registration.
        assetProxies[assetProxyId] = assetProxyContract;
        emit AssetProxyRegistered(
            assetProxyId,
            assetProxy
        );
    }

    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address)
    {
        return assetProxies[assetProxyId];
    }

    /// @dev Forwards arguments to assetProxy and calls `transferFrom`. Either succeeds or throws.
    /// @param assetData Byte array encoded for the asset.
    /// @param from Address to transfer token from.
    /// @param to Address to transfer token to.
    /// @param amount Amount of token to transfer.
    function dispatchTransferFrom(
        bytes memory assetData,
        address from,
        address to,
        uint256 amount
    )
        internal
    {
        // Do nothing if no amount should be transferred.
        if (amount > 0 && from != to) {
            // Ensure assetData length is valid
            require(
                assetData.length > 3,
                "LENGTH_GREATER_THAN_3_REQUIRED"
            );
            
            // Lookup assetProxy. We do not use `LibBytes.readBytes4` for gas efficiency reasons.
            bytes4 assetProxyId;
            assembly {
                assetProxyId := and(mload(
                    add(assetData, 32)),
                    0xFFFFFFFF00000000000000000000000000000000000000000000000000000000
                )
            }
            address assetProxy = assetProxies[assetProxyId];

            // Ensure that assetProxy exists
            require(
                assetProxy != address(0),
                "ASSET_PROXY_DOES_NOT_EXIST"
            );
            
            // We construct calldata for the `assetProxy.transferFrom` ABI.
            // The layout of this calldata is in the table below.
            // 
            // | Area     | Offset | Length  | Contents                                    |
            // | -------- |--------|---------|-------------------------------------------- |
            // | Header   | 0      | 4       | function selector                           |
            // | Params   |        | 4 * 32  | function parameters:                        |
            // |          | 4      |         |   1. offset to assetData (*)                |
            // |          | 36     |         |   2. from                                   |
            // |          | 68     |         |   3. to                                     |
            // |          | 100    |         |   4. amount                                 |
            // | Data     |        |         | assetData:                                  |
            // |          | 132    | 32      | assetData Length                            |
            // |          | 164    | **      | assetData Contents                          |

            assembly {
                /////// Setup State ///////
                // `cdStart` is the start of the calldata for `assetProxy.transferFrom` (equal to free memory ptr).
                let cdStart := mload(64)
                // `dataAreaLength` is the total number of words needed to store `assetData`
                //  As-per the ABI spec, this value is padded up to the nearest multiple of 32,
                //  and includes 32-bytes for length.
                let dataAreaLength := and(add(mload(assetData), 63), 0xFFFFFFFFFFFE0)
                // `cdEnd` is the end of the calldata for `assetProxy.transferFrom`.
                let cdEnd := add(cdStart, add(132, dataAreaLength))

                
                /////// Setup Header Area ///////
                // This area holds the 4-byte `transferFromSelector`.
                // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4
                mstore(cdStart, 0xa85e59e400000000000000000000000000000000000000000000000000000000)
                
                /////// Setup Params Area ///////
                // Each parameter is padded to 32-bytes. The entire Params Area is 128 bytes.
                // Notes:
                //   1. The offset to `assetData` is the length of the Params Area (128 bytes).
                //   2. A 20-byte mask is applied to addresses to zero-out the unused bytes.
                mstore(add(cdStart, 4), 128)
                mstore(add(cdStart, 36), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(cdStart, 68), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(cdStart, 100), amount)
                
                /////// Setup Data Area ///////
                // This area holds `assetData`.
                let dataArea := add(cdStart, 132)
                // solhint-disable-next-line no-empty-blocks
                for {} lt(dataArea, cdEnd) {} {
                    mstore(dataArea, mload(assetData))
                    dataArea := add(dataArea, 32)
                    assetData := add(assetData, 32)
                }

                /////// Call `assetProxy.transferFrom` using the constructed calldata ///////
                let success := call(
                    gas,                    // forward all gas
                    assetProxy,             // call address of asset proxy
                    0,                      // don't send any ETH
                    cdStart,                // pointer to start of input
                    sub(cdEnd, cdStart),    // length of input  
                    cdStart,                // write output over input
                    512                     // reserve 512 bytes for output
                )
                if iszero(success) {
                    revert(cdStart, returndatasize())
                }
            }
        }
    }
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

// solhint-disable
pragma solidity 0.4.24;


/// @dev This contract documents the revert reasons used in the Exchange contract.
/// This contract is intended to serve as a reference, but is not actually used for efficiency reasons.
contract LibExchangeErrors {

    /// Order validation errors ///
    string constant ORDER_UNFILLABLE = "ORDER_UNFILLABLE";                              // Order cannot be filled.
    string constant INVALID_MAKER = "INVALID_MAKER";                                    // Invalid makerAddress.
    string constant INVALID_TAKER = "INVALID_TAKER";                                    // Invalid takerAddress.
    string constant INVALID_SENDER = "INVALID_SENDER";                                  // Invalid `msg.sender`.
    string constant INVALID_ORDER_SIGNATURE = "INVALID_ORDER_SIGNATURE";                // Signature validation failed. 
    
    /// fillOrder validation errors ///
    string constant INVALID_TAKER_AMOUNT = "INVALID_TAKER_AMOUNT";                      // takerAssetFillAmount cannot equal 0.
    string constant ROUNDING_ERROR = "ROUNDING_ERROR";                                  // Rounding error greater than 0.1% of takerAssetFillAmount. 
    
    /// Signature validation errors ///
    string constant INVALID_SIGNATURE = "INVALID_SIGNATURE";                            // Signature validation failed. 
    string constant SIGNATURE_ILLEGAL = "SIGNATURE_ILLEGAL";                            // Signature type is illegal.
    string constant SIGNATURE_UNSUPPORTED = "SIGNATURE_UNSUPPORTED";                    // Signature type unsupported.
    
    /// cancelOrdersUptTo errors ///
    string constant INVALID_NEW_ORDER_EPOCH = "INVALID_NEW_ORDER_EPOCH";                // Specified salt must be greater than or equal to existing orderEpoch.

    /// fillOrKillOrder errors ///
    string constant COMPLETE_FILL_FAILED = "COMPLETE_FILL_FAILED";                      // Desired takerAssetFillAmount could not be completely filled. 

    /// matchOrders errors ///
    string constant NEGATIVE_SPREAD_REQUIRED = "NEGATIVE_SPREAD_REQUIRED";              // Matched orders must have a negative spread.

    /// Transaction errors ///
    string constant REENTRANCY_ILLEGAL = "REENTRANCY_ILLEGAL";                          // Recursive reentrancy is not allowed. 
    string constant INVALID_TX_HASH = "INVALID_TX_HASH";                                // Transaction has already been executed. 
    string constant INVALID_TX_SIGNATURE = "INVALID_TX_SIGNATURE";                      // Signature validation failed. 
    string constant FAILED_EXECUTION = "FAILED_EXECUTION";                              // Transaction execution failed. 
    
    /// registerAssetProxy errors ///
    string constant ASSET_PROXY_ALREADY_EXISTS = "ASSET_PROXY_ALREADY_EXISTS";          // AssetProxy with same id already exists.

    /// dispatchTransferFrom errors ///
    string constant ASSET_PROXY_DOES_NOT_EXIST = "ASSET_PROXY_DOES_NOT_EXIST";          // No assetProxy registered at given id.
    string constant TRANSFER_FAILED = "TRANSFER_FAILED";                                // Asset transfer unsuccesful.

    /// Length validation errors ///
    string constant LENGTH_GREATER_THAN_0_REQUIRED = "LENGTH_GREATER_THAN_0_REQUIRED";  // Byte array must have a length greater than 0.
    string constant LENGTH_GREATER_THAN_3_REQUIRED = "LENGTH_GREATER_THAN_3_REQUIRED";  // Byte array must have a length greater than 3.
    string constant LENGTH_0_REQUIRED = "LENGTH_0_REQUIRED";                            // Byte array must have a length of 0.
    string constant LENGTH_65_REQUIRED = "LENGTH_65_REQUIRED";                          // Byte array must have a length of 65.
}






contract MixinTransactions is
    LibEIP712,
    MSignatureValidator,
    MTransactions
{
    // Mapping of transaction hash => executed
    // This prevents transactions from being executed more than once.
    mapping (bytes32 => bool) public transactions;

    // Address of current transaction signer
    address public currentContextAddress;

    /// @dev Executes an exchange method call in the context of signer.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @param signature Proof of signer transaction by signer.
    function executeTransaction(
        uint256 salt,
        address signerAddress,
        bytes data,
        bytes signature
    )
        external
    {
        // Prevent reentrancy
        require(
            currentContextAddress == address(0),
            "REENTRANCY_ILLEGAL"
        );

        bytes32 transactionHash = hashEIP712Message(hashZeroExTransaction(
            salt,
            signerAddress,
            data
        ));

        // Validate transaction has not been executed
        require(
            !transactions[transactionHash],
            "INVALID_TX_HASH"
        );

        // Transaction always valid if signer is sender of transaction
        if (signerAddress != msg.sender) {
            // Validate signature
            require(
                isValidSignature(
                    transactionHash,
                    signerAddress,
                    signature
                ),
                "INVALID_TX_SIGNATURE"
            );

            // Set the current transaction signer
            currentContextAddress = signerAddress;
        }

        // Execute transaction
        transactions[transactionHash] = true;
        require(
            address(this).delegatecall(data),
            "FAILED_EXECUTION"
        );

        // Reset current transaction signer if it was previously updated
        if (signerAddress != msg.sender) {
            currentContextAddress = address(0);
        }
    }

    /// @dev Calculates EIP712 hash of the Transaction.
    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
    /// @param signerAddress Address of transaction signer.
    /// @param data AbiV2 encoded calldata.
    /// @return EIP712 hash of the Transaction.
    function hashZeroExTransaction(
        uint256 salt,
        address signerAddress,
        bytes memory data
    )
        internal
        pure
        returns (bytes32 result)
    {
        bytes32 schemaHash = EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH;
        bytes32 dataHash = keccak256(data);

        // Assembly for more efficiently computing:
        // keccak256(abi.encodePacked(
        //     EIP712_ZEROEX_TRANSACTION_SCHEMA_HASH,
        //     salt,
        //     bytes32(signerAddress),
        //     keccak256(data)
        // ));

        assembly {
            // Load free memory pointer
            let memPtr := mload(64)

            mstore(memPtr, schemaHash)                                                               // hash of schema
            mstore(add(memPtr, 32), salt)                                                            // salt
            mstore(add(memPtr, 64), and(signerAddress, 0xffffffffffffffffffffffffffffffffffffffff))  // signerAddress
            mstore(add(memPtr, 96), dataHash)                                                        // hash of data

            // Compute hash
            result := keccak256(memPtr, 128)
        }
        return result;
    }

    /// @dev The current function will be called in the context of this address (either 0x transaction signer or `msg.sender`).
    ///      If calling a fill function, this address will represent the taker.
    ///      If calling a cancel function, this address will represent the maker.
    /// @return Signer of 0x transaction if entry point is `executeTransaction`.
    ///         `msg.sender` if entry point is any other function.
    function getCurrentContextAddress()
        internal
        view
        returns (address)
    {
        address currentContextAddress_ = currentContextAddress;
        address contextAddress = currentContextAddress_ == address(0) ? msg.sender : currentContextAddress_;
        return contextAddress;
    }
}

/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/

pragma solidity 0.4.24;







/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;



/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity 0.4.24;





contract IMatchOrders {

    /// @dev Match two complementary orders that have a profitable spread.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the left order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftSignature Proof that order was created by the left maker.
    /// @param rightSignature Proof that order was created by the right maker.
    /// @return matchedFillResults Amounts filled and fees paid by maker and taker of matched orders.
    function matchOrders(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        bytes memory leftSignature,
        bytes memory rightSignature
    )
        public
        returns (LibFillResults.MatchedFillResults memory matchedFillResults);
}



contract MMatchOrders is
    IMatchOrders
{
    /// @dev Validates context for matchOrders. Succeeds or throws.
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    function assertValidMatch(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder
    )
        internal
        pure;

    /// @dev Calculates fill amounts for the matched orders.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the leftOrder order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftOrderTakerAssetFilledAmount Amount of left order already filled.
    /// @param rightOrderTakerAssetFilledAmount Amount of right order already filled.
    /// @param matchedFillResults Amounts to fill and fees to pay by maker and taker of matched orders.
    function calculateMatchedFillResults(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        uint256 leftOrderTakerAssetFilledAmount,
        uint256 rightOrderTakerAssetFilledAmount
    )
        internal
        pure
        returns (LibFillResults.MatchedFillResults memory matchedFillResults);

}





contract MixinMatchOrders is
    ReentrancyGuard,
    LibConstants,
    LibMath,
    MAssetProxyDispatcher,
    MExchangeCore,
    MMatchOrders,
    MTransactions
{
    /// @dev Match two complementary orders that have a profitable spread.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the left order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftSignature Proof that order was created by the left maker.
    /// @param rightSignature Proof that order was created by the right maker.
    /// @return matchedFillResults Amounts filled and fees paid by maker and taker of matched orders.
    function matchOrders(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        bytes memory leftSignature,
        bytes memory rightSignature
    )
        public
        nonReentrant
        returns (LibFillResults.MatchedFillResults memory matchedFillResults)
    {
        // We assume that rightOrder.takerAssetData == leftOrder.makerAssetData and rightOrder.makerAssetData == leftOrder.takerAssetData.
        // If this assumption isn't true, the match will fail at signature validation.
        rightOrder.makerAssetData = leftOrder.takerAssetData;
        rightOrder.takerAssetData = leftOrder.makerAssetData;

        // Get left & right order info
        LibOrder.OrderInfo memory leftOrderInfo = getOrderInfo(leftOrder);
        LibOrder.OrderInfo memory rightOrderInfo = getOrderInfo(rightOrder);

        // Fetch taker address
        address takerAddress = getCurrentContextAddress();
        
        // Either our context is valid or we revert
        assertFillableOrder(
            leftOrder,
            leftOrderInfo,
            takerAddress,
            leftSignature
        );
        assertFillableOrder(
            rightOrder,
            rightOrderInfo,
            takerAddress,
            rightSignature
        );
        assertValidMatch(leftOrder, rightOrder);

        // Compute proportional fill amounts
        matchedFillResults = calculateMatchedFillResults(
            leftOrder,
            rightOrder,
            leftOrderInfo.orderTakerAssetFilledAmount,
            rightOrderInfo.orderTakerAssetFilledAmount
        );

        // Validate fill contexts
        assertValidFill(
            leftOrder,
            leftOrderInfo,
            matchedFillResults.left.takerAssetFilledAmount,
            matchedFillResults.left.takerAssetFilledAmount,
            matchedFillResults.left.makerAssetFilledAmount
        );
        assertValidFill(
            rightOrder,
            rightOrderInfo,
            matchedFillResults.right.takerAssetFilledAmount,
            matchedFillResults.right.takerAssetFilledAmount,
            matchedFillResults.right.makerAssetFilledAmount
        );
        
        // Update exchange state
        updateFilledState(
            leftOrder,
            takerAddress,
            leftOrderInfo.orderHash,
            leftOrderInfo.orderTakerAssetFilledAmount,
            matchedFillResults.left
        );
        updateFilledState(
            rightOrder,
            takerAddress,
            rightOrderInfo.orderHash,
            rightOrderInfo.orderTakerAssetFilledAmount,
            matchedFillResults.right
        );

        // Settle matched orders. Succeeds or throws.
        settleMatchedOrders(
            leftOrder,
            rightOrder,
            takerAddress,
            matchedFillResults
        );

        return matchedFillResults;
    }

    /// @dev Validates context for matchOrders. Succeeds or throws.
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    function assertValidMatch(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder
    )
        internal
        pure
    {
        // Make sure there is a profitable spread.
        // There is a profitable spread iff the cost per unit bought (OrderA.MakerAmount/OrderA.TakerAmount) for each order is greater
        // than the profit per unit sold of the matched order (OrderB.TakerAmount/OrderB.MakerAmount).
        // This is satisfied by the equations below:
        // <leftOrder.makerAssetAmount> / <leftOrder.takerAssetAmount> >= <rightOrder.takerAssetAmount> / <rightOrder.makerAssetAmount>
        // AND
        // <rightOrder.makerAssetAmount> / <rightOrder.takerAssetAmount> >= <leftOrder.takerAssetAmount> / <leftOrder.makerAssetAmount>
        // These equations can be combined to get the following:
        require(
            safeMul(leftOrder.makerAssetAmount, rightOrder.makerAssetAmount) >=
            safeMul(leftOrder.takerAssetAmount, rightOrder.takerAssetAmount),
            "NEGATIVE_SPREAD_REQUIRED"
        );
    }

    /// @dev Calculates fill amounts for the matched orders.
    ///      Each order is filled at their respective price point. However, the calculations are
    ///      carried out as though the orders are both being filled at the right order's price point.
    ///      The profit made by the leftOrder order goes to the taker (who matched the two orders).
    /// @param leftOrder First order to match.
    /// @param rightOrder Second order to match.
    /// @param leftOrderTakerAssetFilledAmount Amount of left order already filled.
    /// @param rightOrderTakerAssetFilledAmount Amount of right order already filled.
    /// @param matchedFillResults Amounts to fill and fees to pay by maker and taker of matched orders.
    function calculateMatchedFillResults(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        uint256 leftOrderTakerAssetFilledAmount,
        uint256 rightOrderTakerAssetFilledAmount
    )
        internal
        pure
        returns (LibFillResults.MatchedFillResults memory matchedFillResults)
    {
        // Derive maker asset amounts for left & right orders, given store taker assert amounts
        uint256 leftTakerAssetAmountRemaining = safeSub(leftOrder.takerAssetAmount, leftOrderTakerAssetFilledAmount);
        uint256 leftMakerAssetAmountRemaining = safeGetPartialAmountFloor(
            leftOrder.makerAssetAmount,
            leftOrder.takerAssetAmount,
            leftTakerAssetAmountRemaining
        );
        uint256 rightTakerAssetAmountRemaining = safeSub(rightOrder.takerAssetAmount, rightOrderTakerAssetFilledAmount);
        uint256 rightMakerAssetAmountRemaining = safeGetPartialAmountFloor(
            rightOrder.makerAssetAmount,
            rightOrder.takerAssetAmount,
            rightTakerAssetAmountRemaining
        );

        // Calculate fill results for maker and taker assets: at least one order will be fully filled.
        // The maximum amount the left maker can buy is `leftTakerAssetAmountRemaining`
        // The maximum amount the right maker can sell is `rightMakerAssetAmountRemaining`
        // We have two distinct cases for calculating the fill results:
        // Case 1.
        //   If the left maker can buy more than the right maker can sell, then only the right order is fully filled.
        //   If the left maker can buy exactly what the right maker can sell, then both orders are fully filled.
        // Case 2.
        //   If the left maker cannot buy more than the right maker can sell, then only the left order is fully filled.
        if (leftTakerAssetAmountRemaining >= rightMakerAssetAmountRemaining) {
            // Case 1: Right order is fully filled
            matchedFillResults.right.makerAssetFilledAmount = rightMakerAssetAmountRemaining;
            matchedFillResults.right.takerAssetFilledAmount = rightTakerAssetAmountRemaining;
            matchedFillResults.left.takerAssetFilledAmount = matchedFillResults.right.makerAssetFilledAmount;
            // Round down to ensure the maker's exchange rate does not exceed the price specified by the order. 
            // We favor the maker when the exchange rate must be rounded.
            matchedFillResults.left.makerAssetFilledAmount = safeGetPartialAmountFloor(
                leftOrder.makerAssetAmount,
                leftOrder.takerAssetAmount,
                matchedFillResults.left.takerAssetFilledAmount
            );
        } else {
            // Case 2: Left order is fully filled
            matchedFillResults.left.makerAssetFilledAmount = leftMakerAssetAmountRemaining;
            matchedFillResults.left.takerAssetFilledAmount = leftTakerAssetAmountRemaining;
            matchedFillResults.right.makerAssetFilledAmount = matchedFillResults.left.takerAssetFilledAmount;
            // Round up to ensure the maker's exchange rate does not exceed the price specified by the order.
            // We favor the maker when the exchange rate must be rounded.
            matchedFillResults.right.takerAssetFilledAmount = safeGetPartialAmountCeil(
                rightOrder.takerAssetAmount,
                rightOrder.makerAssetAmount,
                matchedFillResults.right.makerAssetFilledAmount
            );
        }

        // Calculate amount given to taker
        matchedFillResults.leftMakerAssetSpreadAmount = safeSub(
            matchedFillResults.left.makerAssetFilledAmount,
            matchedFillResults.right.takerAssetFilledAmount
        );

        // Compute fees for left order
        matchedFillResults.left.makerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.left.makerAssetFilledAmount,
            leftOrder.makerAssetAmount,
            leftOrder.makerFee
        );
        matchedFillResults.left.takerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.left.takerAssetFilledAmount,
            leftOrder.takerAssetAmount,
            leftOrder.takerFee
        );

        // Compute fees for right order
        matchedFillResults.right.makerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.right.makerAssetFilledAmount,
            rightOrder.makerAssetAmount,
            rightOrder.makerFee
        );
        matchedFillResults.right.takerFeePaid = safeGetPartialAmountFloor(
            matchedFillResults.right.takerAssetFilledAmount,
            rightOrder.takerAssetAmount,
            rightOrder.takerFee
        );

        // Return fill results
        return matchedFillResults;
    }

    /// @dev Settles matched order by transferring appropriate funds between order makers, taker, and fee recipient.
    /// @param leftOrder First matched order.
    /// @param rightOrder Second matched order.
    /// @param takerAddress Address that matched the orders. The taker receives the spread between orders as profit.
    /// @param matchedFillResults Struct holding amounts to transfer between makers, taker, and fee recipients.
    function settleMatchedOrders(
        LibOrder.Order memory leftOrder,
        LibOrder.Order memory rightOrder,
        address takerAddress,
        LibFillResults.MatchedFillResults memory matchedFillResults
    )
        private
    {
        bytes memory zrxAssetData = ZRX_ASSET_DATA;
        // Order makers and taker
        dispatchTransferFrom(
            leftOrder.makerAssetData,
            leftOrder.makerAddress,
            rightOrder.makerAddress,
            matchedFillResults.right.takerAssetFilledAmount
        );
        dispatchTransferFrom(
            rightOrder.makerAssetData,
            rightOrder.makerAddress,
            leftOrder.makerAddress,
            matchedFillResults.left.takerAssetFilledAmount
        );
        dispatchTransferFrom(
            leftOrder.makerAssetData,
            leftOrder.makerAddress,
            takerAddress,
            matchedFillResults.leftMakerAssetSpreadAmount
        );

        // Maker fees
        dispatchTransferFrom(
            zrxAssetData,
            leftOrder.makerAddress,
            leftOrder.feeRecipientAddress,
            matchedFillResults.left.makerFeePaid
        );
        dispatchTransferFrom(
            zrxAssetData,
            rightOrder.makerAddress,
            rightOrder.feeRecipientAddress,
            matchedFillResults.right.makerFeePaid
        );

        // Taker fees
        if (leftOrder.feeRecipientAddress == rightOrder.feeRecipientAddress) {
            dispatchTransferFrom(
                zrxAssetData,
                takerAddress,
                leftOrder.feeRecipientAddress,
                safeAdd(
                    matchedFillResults.left.takerFeePaid,
                    matchedFillResults.right.takerFeePaid
                )
            );
        } else {
            dispatchTransferFrom(
                zrxAssetData,
                takerAddress,
                leftOrder.feeRecipientAddress,
                matchedFillResults.left.takerFeePaid
            );
            dispatchTransferFrom(
                zrxAssetData,
                takerAddress,
                rightOrder.feeRecipientAddress,
                matchedFillResults.right.takerFeePaid
            );
        }
    }
}



// solhint-disable no-empty-blocks
contract Exchange is
    MixinExchangeCore,
    MixinMatchOrders,
    MixinSignatureValidator,
    MixinTransactions,
    MixinAssetProxyDispatcher,
    MixinWrapperFunctions
{
    string constant public VERSION = "2.0.1-alpha";

    // Mixins are instantiated in the order they are inherited
    constructor (bytes memory _zrxAssetData)
        public
        LibConstants(_zrxAssetData) // @TODO: Remove when we deploy.
        MixinExchangeCore()
        MixinMatchOrders()
        MixinSignatureValidator()
        MixinTransactions()
        MixinAssetProxyDispatcher()
        MixinWrapperFunctions()
    {}
}

/**
 *Submitted for verification at Etherscan.io on 2021-07-07
*/

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
        // Copy msg.data. We take full control of memory in this inline assembly
        // block because it will not return to Solidity code. We overwrite the
        // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

        // Call the implementation.
        // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

        // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}


/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(address newImplementation, bytes memory data, bool forceCall) internal {
        address oldImplementation = _getImplementation();

        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }

        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature(
                    "upgradeTo(address)",
                    oldImplementation
                )
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _setImplementation(newImplementation);
            emit Upgraded(newImplementation);
        }
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(
            Address.isContract(newBeacon),
            "ERC1967: new beacon is not a contract"
        );
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
}

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {

    /**
     * @dev Returns the current implementation of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("implementation()")) == 0x5c60da1b
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
        require(success);
        return abi.decode(returndata, (address));
    }

    /**
     * @dev Returns the current admin of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("admin()")) == 0xf851a440
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
        require(success);
        return abi.decode(returndata, (address));
    }

    /**
     * @dev Changes the admin of `proxy` to `newAdmin`.
     *
     * Requirements:
     *
     * - This contract must be the current admin of `proxy`.
     */
    function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
        proxy.changeAdmin(newAdmin);
    }

    /**
     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
        proxy.upgradeTo(implementation);
    }

    /**
     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
     * {TransparentUpgradeableProxy-upgradeToAndCall}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgradeAndCall(TransparentUpgradeableProxy proxy, address implementation, bytes memory data) public payable virtual onlyOwner {
        proxy.upgradeToAndCall{value: msg.value}(implementation, data);
    }
}


/**
 * @dev Base contract for building openzeppelin-upgrades compatible implementations for the {ERC1967Proxy}. It includes
 * publicly available upgrade functions that are called by the plugin and by the secure upgrade mechanism to verify
 * continuation of the upgradability.
 *
 * The {_authorizeUpgrade} function MUST be overridden to include access restriction to the upgrade mechanism.
 *
 * _Available since v4.1._
 */
abstract contract UUPSUpgradeable is ERC1967Upgrade {
    function upgradeTo(address newImplementation) external virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, bytes(""), false);
    }

    function upgradeToAndCall(address newImplementation, bytes memory data) external payable virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, data, true);
    }

    function _authorizeUpgrade(address newImplementation) internal virtual;
}


abstract contract Proxiable is UUPSUpgradeable {
    function _authorizeUpgrade(address newImplementation) internal override {
        _beforeUpgrade(newImplementation);
    }

    function _beforeUpgrade(address newImplementation) internal virtual;
}

contract ChildOfProxiable is Proxiable {
    function _beforeUpgrade(address newImplementation) internal virtual override {}
}


/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}

/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(address _logic, address admin_, bytes memory _data) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _changeAdmin(admin_);
    }

    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }

    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }

    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }

    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }

    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }

    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }

    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}


// Kept for backwards compatibility with older versions of Hardhat and Truffle plugins.
contract AdminUpgradeabilityProxy is TransparentUpgradeableProxy {
    constructor(address logic, address admin, bytes memory data) payable TransparentUpgradeableProxy(logic, admin, data) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
        // Copy msg.data. We take full control of memory in this inline assembly
        // block because it will not return to Solidity code. We overwrite the
        // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

        // Call the implementation.
        // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

        // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}


/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(address newImplementation, bytes memory data, bool forceCall) internal {
        address oldImplementation = _getImplementation();

        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }

        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature(
                    "upgradeTo(address)",
                    oldImplementation
                )
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _setImplementation(newImplementation);
            emit Upgraded(newImplementation);
        }
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(
            Address.isContract(newBeacon),
            "ERC1967: new beacon is not a contract"
        );
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }
}

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {

    /**
     * @dev Returns the current implementation of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("implementation()")) == 0x5c60da1b
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
        require(success);
        return abi.decode(returndata, (address));
    }

    /**
     * @dev Returns the current admin of `proxy`.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
        // We need to manually run the static call since the getter cannot be flagged as view
        // bytes4(keccak256("admin()")) == 0xf851a440
        (bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
        require(success);
        return abi.decode(returndata, (address));
    }

    /**
     * @dev Changes the admin of `proxy` to `newAdmin`.
     *
     * Requirements:
     *
     * - This contract must be the current admin of `proxy`.
     */
    function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
        proxy.changeAdmin(newAdmin);
    }

    /**
     * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
        proxy.upgradeTo(implementation);
    }

    /**
     * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
     * {TransparentUpgradeableProxy-upgradeToAndCall}.
     *
     * Requirements:
     *
     * - This contract must be the admin of `proxy`.
     */
    function upgradeAndCall(TransparentUpgradeableProxy proxy, address implementation, bytes memory data) public payable virtual onlyOwner {
        proxy.upgradeToAndCall{value: msg.value}(implementation, data);
    }
}


/**
 * @dev Base contract for building openzeppelin-upgrades compatible implementations for the {ERC1967Proxy}. It includes
 * publicly available upgrade functions that are called by the plugin and by the secure upgrade mechanism to verify
 * continuation of the upgradability.
 *
 * The {_authorizeUpgrade} function MUST be overridden to include access restriction to the upgrade mechanism.
 *
 * _Available since v4.1._
 */
abstract contract UUPSUpgradeable is ERC1967Upgrade {
    function upgradeTo(address newImplementation) external virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, bytes(""), false);
    }

    function upgradeToAndCall(address newImplementation, bytes memory data) external payable virtual {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallSecure(newImplementation, data, true);
    }

    function _authorizeUpgrade(address newImplementation) internal virtual;
}


abstract contract Proxiable is UUPSUpgradeable {
    function _authorizeUpgrade(address newImplementation) internal override {
        _beforeUpgrade(newImplementation);
    }

    function _beforeUpgrade(address newImplementation) internal virtual;
}

contract ChildOfProxiable is Proxiable {
    function _beforeUpgrade(address newImplementation) internal virtual override {}
}


/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}

/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
     */
    constructor(address _logic, address admin_, bytes memory _data) payable ERC1967Proxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _changeAdmin(admin_);
    }

    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _getAdmin()) {
            _;
        } else {
            _fallback();
        }
    }

    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _getAdmin();
    }

    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        _changeAdmin(newAdmin);
    }

    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeToAndCall(newImplementation, bytes(""), false);
    }

    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeToAndCall(newImplementation, data, true);
    }

    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address) {
        return _getAdmin();
    }

    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}


// Kept for backwards compatibility with older versions of Hardhat and Truffle plugins.
contract AdminUpgradeabilityProxy is TransparentUpgradeableProxy {
    constructor(address logic, address admin, bytes memory data) payable TransparentUpgradeableProxy(logic, admin, data) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155Burnable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
abstract contract MigrateTokenContract {
    function mintTransfer(
        address to,
        uint256 tokenId,
        uint256 amount
    ) external virtual;
}
/**
 * @title Capacitors
 * @author WoW Studio LTD
 */
contract Capacitors is ERC1155, ERC1155Burnable, Ownable {
    mapping(uint256 => bool) private _migrationActivePerToken;
    mapping(uint256 => bool) private _lockedTokens;
    address private _externalContract1;
    address private _externalContract2;
    constructor(string memory uri_) ERC1155(uri_) {} // solhint-disable-line
    function externalContract1() public view returns (address) {
        return _externalContract1;
    }
    function externalContract2() public view returns (address) {
        return _externalContract2;
    }
    /**
     * @notice Mint and send different amounts of tokenId to different receivers
     * @param tokenId The token id of the merch item we airdrop
     * @param amounts Amounts of tokens per dropAddress we airdrop
     * @param dropAddresses An array of receivers
     */
    function mint(
        uint256 tokenId,
        uint256[] calldata amounts,
        address[] calldata dropAddresses
    ) external onlyOwner {
        require(!_lockedTokens[tokenId], "Token locked");
        for (uint256 i = 0; i < dropAddresses.length; i++) {
            _mint(dropAddresses[i], tokenId, amounts[i], "");
        }
    }
    /**
     * @notice Set the _uri parameter
     * @param newuri A global uri for all the tokens Following EIP-1155, should contain `{id}`
     */
    function setURI(string memory newuri) external onlyOwner {
        _setURI(newuri);
    }
    /**
     * @notice Set the authorizedContract parameter
     * @param externalContract1_ The authorized contract address
     */
    function setExternalContract1(address externalContract1_) external onlyOwner {
        _externalContract1 = externalContract1_;
    }
    /**
     * @notice Set the authorizedContract parameter
     * @param externalContract2_ The authorized contract address
     */
    function setExternalContract2(address externalContract2_) external onlyOwner {
        _externalContract2 = externalContract2_;
    }
    /**
     * @notice Enable migration to an other contract for a given token id
     * @param tokenId The token id of the merch item we want to burn/create an interaction with
     */
    function toggleMigrationForToken(uint256 tokenId) external onlyOwner {
        require(_externalContract1 != address(0), "External contract 1 not set");
        require(_externalContract2 != address(0), "External contract 2 not set");
        _migrationActivePerToken[tokenId] = !_migrationActivePerToken[tokenId];
    }
    /**
     * @notice Used to lock a token id. Once locked, it's no longer possible to create more of this token
     * @param tokenId The token id of the merch item we want to lock
     */
    function lockToken(uint256 tokenId) external onlyOwner {
        require(!_lockedTokens[tokenId], "Token already locked");
        _lockedTokens[tokenId] = true;
    }
    /**
     * @notice Migrate an amount of tokenId using the defined authorized contract
     * @param tokenId The token id of the merch item we want to migrate
     * @param amount The amount we want to migrate
     */
    function migrateTokens(uint256 tokenId, uint256 amount) external {
        require(_migrationActivePerToken[tokenId], "Migration is not active");
        require(balanceOf(msg.sender, tokenId) >= amount, "Doesn't own that amount of token");
        burn(msg.sender, tokenId, amount); // Burn
        MigrateTokenContract migrationContract1 = MigrateTokenContract(_externalContract1);
        migrationContract1.mintTransfer(msg.sender, tokenId, amount);
        MigrateTokenContract migrationContract2 = MigrateTokenContract(_externalContract2);
        migrationContract2.mintTransfer(msg.sender, tokenId, amount);
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override(ERC1155)
        returns (bool)
    {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";
/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;
    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;
    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;
    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;
    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\\{id\\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }
    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: balance query for the zero address");
        return _balances[id][account];
    }
    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
        uint256[] memory batchBalances = new uint256[](accounts.length);
        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }
        return batchBalances;
    }
    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }
    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }
    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }
    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: transfer caller is not owner nor approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }
    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");
        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);
        _beforeTokenTransfer(operator, from, to, ids, amounts, data);
        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;
        emit TransferSingle(operator, from, to, id, amount);
        _afterTokenTransfer(operator, from, to, ids, amounts, data);
        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, from, to, ids, amounts, data);
        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];
            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }
        emit TransferBatch(operator, from, to, ids, amounts);
        _afterTokenTransfer(operator, from, to, ids, amounts, data);
        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }
    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\\{id\\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\\{id\\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }
    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);
        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);
        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);
        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }
        emit TransferBatch(operator, address(0), to, ids, amounts);
        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);
        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }
    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);
        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        emit TransferSingle(operator, from, address(0), id, amount);
        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        address operator = _msgSender();
        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];
            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }
        emit TransferBatch(operator, from, address(0), ids, amounts);
        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }
    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }
    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}
    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}
    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }
    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }
    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;
        return array;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/ERC1155Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC1155.sol";
/**
 * @dev Extension of {ERC1155} that allows token holders to destroy both their
 * own tokens and those that they have been approved to use.
 *
 * _Available since v3.1._
 */
abstract contract ERC1155Burnable is ERC1155 {
    function burn(
        address account,
        uint256 id,
        uint256 value
    ) public virtual {
        require(
            account == _msgSender() || isApprovedForAll(account, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _burn(account, id, value);
    }
    function burnBatch(
        address account,
        uint256[] memory ids,
        uint256[] memory values
    ) public virtual {
        require(
            account == _msgSender() || isApprovedForAll(account, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _burnBatch(account, ids, values);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );
    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);
    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);
    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);
    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;
    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);
    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);
    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
import "../IERC1155.sol";
/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\\{id\\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "./MixinAssetProxyDispatcher.sol";
import "./MixinAuthorizable.sol";
contract MultiAssetProxy is
    MixinAssetProxyDispatcher,
    MixinAuthorizable
{
    // Id of this proxy.
    bytes4 constant internal PROXY_ID = bytes4(keccak256("MultiAsset(uint256[],bytes[])"));
    // solhint-disable-next-line payable-fallback
    function ()
        external
    {
        // NOTE: The below assembly assumes that clients do some input validation and that the input is properly encoded according to the AbiV2 specification.
        // It is technically possible for inputs with very large lengths and offsets to cause overflows. However, this would make the calldata prohibitively
        // expensive and we therefore do not check for overflows in these scenarios.
        assembly {
            // The first 4 bytes of calldata holds the function selector
            let selector := and(calldataload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000)
            // `transferFrom` will be called with the following parameters:
            // assetData Encoded byte array.
            // from Address to transfer asset from.
            // to Address to transfer asset to.
            // amount Amount of asset to transfer.
            // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4
            if eq(selector, 0xa85e59e400000000000000000000000000000000000000000000000000000000) {
                // To lookup a value in a mapping, we load from the storage location keccak256(k, p),
                // where k is the key left padded to 32 bytes and p is the storage slot
                mstore(0, caller)
                mstore(32, authorized_slot)
                // Revert if authorized[msg.sender] == false
                if iszero(sload(keccak256(0, 64))) {
                    // Revert with `Error("SENDER_NOT_AUTHORIZED")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x0000001553454e4445525f4e4f545f415554484f52495a454400000000000000)
                    mstore(96, 0)
                    revert(0, 100)
                }
                // `transferFrom`.
                // The function is marked `external`, so no abi decoding is done for
                // us. Instead, we expect the `calldata` memory to contain the
                // following:
                //
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 4 * 32  | function parameters:                |
                // |          | 4      |         |   1. offset to assetData (*)        |
                // |          | 36     |         |   2. from                           |
                // |          | 68     |         |   3. to                             |
                // |          | 100    |         |   4. amount                         |
                // | Data     |        |         | assetData:                          |
                // |          | 132    | 32      | assetData Length                    |
                // |          | 164    | **      | assetData Contents                  |
                //
                // (*): offset is computed from start of function parameters, so offset
                //      by an additional 4 bytes in the calldata.
                //
                // (**): see table below to compute length of assetData Contents
                //
                // WARNING: The ABIv2 specification allows additional padding between
                //          the Params and Data section. This will result in a larger
                //          offset to assetData.
                // Load offset to `assetData`
                let assetDataOffset := add(calldataload(4), 4)
                // Load length in bytes of `assetData`
                let assetDataLength := calldataload(assetDataOffset)
                // Asset data itself is encoded as follows:
                //
                // | Area     | Offset      | Length  | Contents                            |
                // |----------|-------------|---------|-------------------------------------|
                // | Header   | 0           | 4       | assetProxyId                        |
                // | Params   |             | 2 * 32  | function parameters:                |
                // |          | 4           |         |   1. offset to amounts (*)          |
                // |          | 36          |         |   2. offset to nestedAssetData (*)  |
                // | Data     |             |         | amounts:                            |
                // |          | 68          | 32      | amounts Length                      |
                // |          | 100         | a       | amounts Contents                    | 
                // |          |             |         | nestedAssetData:                    |
                // |          | 100 + a     | 32      | nestedAssetData Length              |
                // |          | 132 + a     | b       | nestedAssetData Contents (offsets)  |
                // |          | 132 + a + b |         | nestedAssetData[0, ..., len]        |
                // Assert that the length of asset data:
                // 1. Must be at least 68 bytes (see table above)
                // 2. Must be a multiple of 32 (excluding the 4-byte selector)
                if or(lt(assetDataLength, 68), mod(sub(assetDataLength, 4), 32)) {
                    // Revert with `Error("INVALID_ASSET_DATA_LENGTH")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x00000019494e56414c49445f41535345545f444154415f4c454e475448000000)
                    mstore(96, 0)
                    revert(0, 100)
                }
                // End of asset data in calldata
                // assetDataOffset
                // + 32 (assetData len)
                let assetDataEnd := add(assetDataOffset, add(assetDataLength, 32))
                if gt(assetDataEnd, calldatasize()) {
                    // Revert with `Error("INVALID_ASSET_DATA_END")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x00000016494e56414c49445f41535345545f444154415f454e44000000000000)
                    mstore(96, 0)
                    revert(0, 100)
                }
                // In order to find the offset to `amounts`, we must add:
                // assetDataOffset
                // + 32 (assetData len)
                // + 4 (assetProxyId)
                let amountsOffset := calldataload(add(assetDataOffset, 36))
                // In order to find the offset to `nestedAssetData`, we must add:
                // assetDataOffset
                // + 32 (assetData len)
                // + 4 (assetProxyId)
                // + 32 (amounts offset)
                let nestedAssetDataOffset := calldataload(add(assetDataOffset, 68))
                // In order to find the start of the `amounts` contents, we must add: 
                // assetDataOffset 
                // + 32 (assetData len)
                // + 4 (assetProxyId)
                // + amountsOffset
                // + 32 (amounts len)
                let amountsContentsStart := add(assetDataOffset, add(amountsOffset, 68))
                // Load number of elements in `amounts`
                let amountsLen := calldataload(sub(amountsContentsStart, 32))
                // In order to find the start of the `nestedAssetData` contents, we must add: 
                // assetDataOffset 
                // + 32 (assetData len)
                // + 4 (assetProxyId)
                // + nestedAssetDataOffset
                // + 32 (nestedAssetData len)
                let nestedAssetDataContentsStart := add(assetDataOffset, add(nestedAssetDataOffset, 68))
                // Load number of elements in `nestedAssetData`
                let nestedAssetDataLen := calldataload(sub(nestedAssetDataContentsStart, 32))
                // Revert if number of elements in `amounts` differs from number of elements in `nestedAssetData`
                if sub(amountsLen, nestedAssetDataLen) {
                    // Revert with `Error("LENGTH_MISMATCH")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x0000000f4c454e4754485f4d49534d4154434800000000000000000000000000)
                    mstore(96, 0)
                    revert(0, 100)
                }
                // Copy `transferFrom` selector, offset to `assetData`, `from`, and `to` from calldata to memory
                calldatacopy(
                    0,   // memory can safely be overwritten from beginning
                    0,   // start of calldata
                    100  // length of selector (4) and 3 params (32 * 3)
                )
                // Overwrite existing offset to `assetData` with our own
                mstore(4, 128)
                
                // Load `amount`
                let amount := calldataload(100)
        
                // Calculate number of bytes in `amounts` contents
                let amountsByteLen := mul(amountsLen, 32)
                // Initialize `assetProxyId` and `assetProxy` to 0
                let assetProxyId := 0
                let assetProxy := 0
                // Loop through `amounts` and `nestedAssetData`, calling `transferFrom` for each respective element
                for {let i := 0} lt(i, amountsByteLen) {i := add(i, 32)} {
                    // Calculate the total amount
                    let amountsElement := calldataload(add(amountsContentsStart, i))
                    let totalAmount := mul(amountsElement, amount)
                    // Revert if `amount` != 0 and multiplication resulted in an overflow 
                    if iszero(or(
                        iszero(amount),
                        eq(div(totalAmount, amount), amountsElement)
                    )) {
                        // Revert with `Error("UINT256_OVERFLOW")`
                        mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                        mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                        mstore(64, 0x0000001055494e543235365f4f564552464c4f57000000000000000000000000)
                        mstore(96, 0)
                        revert(0, 100)
                    }
                    // Write `totalAmount` to memory
                    mstore(100, totalAmount)
                    // Load offset to `nestedAssetData[i]`
                    let nestedAssetDataElementOffset := calldataload(add(nestedAssetDataContentsStart, i))
                    // In order to find the start of the `nestedAssetData[i]` contents, we must add:
                    // assetDataOffset 
                    // + 32 (assetData len)
                    // + 4 (assetProxyId)
                    // + nestedAssetDataOffset
                    // + 32 (nestedAssetData len)
                    // + nestedAssetDataElementOffset
                    // + 32 (nestedAssetDataElement len)
                    let nestedAssetDataElementContentsStart := add(
                        assetDataOffset,
                        add(
                            nestedAssetDataOffset,
                            add(nestedAssetDataElementOffset, 100)
                        )
                    )
                    // Load length of `nestedAssetData[i]`
                    let nestedAssetDataElementLenStart := sub(nestedAssetDataElementContentsStart, 32)
                    let nestedAssetDataElementLen := calldataload(nestedAssetDataElementLenStart)
                    // Revert if the `nestedAssetData` does not contain a 4 byte `assetProxyId`
                    if lt(nestedAssetDataElementLen, 4) {
                        // Revert with `Error("LENGTH_GREATER_THAN_3_REQUIRED")`
                        mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                        mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                        mstore(64, 0x0000001e4c454e4754485f475245415445525f5448414e5f335f524551554952)
                        mstore(96, 0x4544000000000000000000000000000000000000000000000000000000000000)
                        revert(0, 100)
                    }
                    // Load AssetProxy id
                    let currentAssetProxyId := and(
                        calldataload(nestedAssetDataElementContentsStart),
                        0xffffffff00000000000000000000000000000000000000000000000000000000
                    )
                    // Only load `assetProxy` if `currentAssetProxyId` does not equal `assetProxyId`
                    // We do not need to check if `currentAssetProxyId` is 0 since `assetProxy` is also initialized to 0
                    if sub(currentAssetProxyId, assetProxyId) {
                        // Update `assetProxyId`
                        assetProxyId := currentAssetProxyId
                        // To lookup a value in a mapping, we load from the storage location keccak256(k, p),
                        // where k is the key left padded to 32 bytes and p is the storage slot
                        mstore(132, assetProxyId)
                        mstore(164, assetProxies_slot)
                        assetProxy := sload(keccak256(132, 64))
                    }
                    
                    // Revert if AssetProxy with given id does not exist
                    if iszero(assetProxy) {
                        // Revert with `Error("ASSET_PROXY_DOES_NOT_EXIST")`
                        mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                        mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                        mstore(64, 0x0000001a41535345545f50524f58595f444f45535f4e4f545f45584953540000)
                        mstore(96, 0)
                        revert(0, 100)
                    }
    
                    // Copy `nestedAssetData[i]` from calldata to memory
                    calldatacopy(
                        132,                                // memory slot after `amounts[i]`
                        nestedAssetDataElementLenStart,     // location of `nestedAssetData[i]` in calldata
                        add(nestedAssetDataElementLen, 32)  // `nestedAssetData[i].length` plus 32 byte length
                    )
                    // call `assetProxy.transferFrom`
                    let success := call(
                        gas,                                    // forward all gas
                        assetProxy,                             // call address of asset proxy
                        0,                                      // don't send any ETH
                        0,                                      // pointer to start of input
                        add(164, nestedAssetDataElementLen),    // length of input  
                        0,                                      // write output over memory that won't be reused
                        0                                       // don't copy output to memory
                    )
                    // Revert with reason given by AssetProxy if `transferFrom` call failed
                    if iszero(success) {
                        returndatacopy(
                            0,                // copy to memory at 0
                            0,                // copy from return data at 0
                            returndatasize()  // copy all return data
                        )
                        revert(0, returndatasize())
                    }
                }
                // Return if no `transferFrom` calls reverted
                return(0, 0)
            }
            // Revert if undefined function is called
            revert(0, 0)
        }
    }
    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4)
    {
        return PROXY_ID;
    }
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "@0x/contracts-utils/contracts/src/Ownable.sol";
import "./mixins/MAssetProxyDispatcher.sol";
import "./interfaces/IAssetProxy.sol";
contract MixinAssetProxyDispatcher is
    Ownable,
    MAssetProxyDispatcher
{
    // Mapping from Asset Proxy Id's to their respective Asset Proxy
    mapping (bytes4 => address) public assetProxies;
    /// @dev Registers an asset proxy to its asset proxy id.
    ///      Once an asset proxy is registered, it cannot be unregistered.
    /// @param assetProxy Address of new asset proxy to register.
    function registerAssetProxy(address assetProxy)
        external
        onlyOwner
    {
        // Ensure that no asset proxy exists with current id.
        bytes4 assetProxyId = IAssetProxy(assetProxy).getProxyId();
        address currentAssetProxy = assetProxies[assetProxyId];
        require(
            currentAssetProxy == address(0),
            "ASSET_PROXY_ALREADY_EXISTS"
        );
        // Add asset proxy and log registration.
        assetProxies[assetProxyId] = assetProxy;
        emit AssetProxyRegistered(
            assetProxyId,
            assetProxy
        );
    }
    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address)
    {
        return assetProxies[assetProxyId];
    }
    /// @dev Forwards arguments to assetProxy and calls `transferFrom`. Either succeeds or throws.
    /// @param assetData Byte array encoded for the asset.
    /// @param from Address to transfer token from.
    /// @param to Address to transfer token to.
    /// @param amount Amount of token to transfer.
    function dispatchTransferFrom(
        bytes memory assetData,
        address from,
        address to,
        uint256 amount
    )
        internal
    {
        // Do nothing if no amount should be transferred.
        if (amount > 0 && from != to) {
            // Ensure assetData length is valid
            require(
                assetData.length > 3,
                "LENGTH_GREATER_THAN_3_REQUIRED"
            );
            
            // Lookup assetProxy. We do not use `LibBytes.readBytes4` for gas efficiency reasons.
            bytes4 assetProxyId;
            assembly {
                assetProxyId := and(mload(
                    add(assetData, 32)),
                    0xFFFFFFFF00000000000000000000000000000000000000000000000000000000
                )
            }
            address assetProxy = assetProxies[assetProxyId];
            // Ensure that assetProxy exists
            require(
                assetProxy != address(0),
                "ASSET_PROXY_DOES_NOT_EXIST"
            );
            
            // We construct calldata for the `assetProxy.transferFrom` ABI.
            // The layout of this calldata is in the table below.
            // 
            // | Area     | Offset | Length  | Contents                                    |
            // | -------- |--------|---------|-------------------------------------------- |
            // | Header   | 0      | 4       | function selector                           |
            // | Params   |        | 4 * 32  | function parameters:                        |
            // |          | 4      |         |   1. offset to assetData (*)                |
            // |          | 36     |         |   2. from                                   |
            // |          | 68     |         |   3. to                                     |
            // |          | 100    |         |   4. amount                                 |
            // | Data     |        |         | assetData:                                  |
            // |          | 132    | 32      | assetData Length                            |
            // |          | 164    | **      | assetData Contents                          |
            assembly {
                /////// Setup State ///////
                // `cdStart` is the start of the calldata for `assetProxy.transferFrom` (equal to free memory ptr).
                let cdStart := mload(64)
                // `dataAreaLength` is the total number of words needed to store `assetData`
                //  As-per the ABI spec, this value is padded up to the nearest multiple of 32,
                //  and includes 32-bytes for length.
                let dataAreaLength := and(add(mload(assetData), 63), 0xFFFFFFFFFFFE0)
                // `cdEnd` is the end of the calldata for `assetProxy.transferFrom`.
                let cdEnd := add(cdStart, add(132, dataAreaLength))
                
                /////// Setup Header Area ///////
                // This area holds the 4-byte `transferFromSelector`.
                // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4
                mstore(cdStart, 0xa85e59e400000000000000000000000000000000000000000000000000000000)
                
                /////// Setup Params Area ///////
                // Each parameter is padded to 32-bytes. The entire Params Area is 128 bytes.
                // Notes:
                //   1. The offset to `assetData` is the length of the Params Area (128 bytes).
                //   2. A 20-byte mask is applied to addresses to zero-out the unused bytes.
                mstore(add(cdStart, 4), 128)
                mstore(add(cdStart, 36), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(cdStart, 68), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(cdStart, 100), amount)
                
                /////// Setup Data Area ///////
                // This area holds `assetData`.
                let dataArea := add(cdStart, 132)
                // solhint-disable-next-line no-empty-blocks
                for {} lt(dataArea, cdEnd) {} {
                    mstore(dataArea, mload(assetData))
                    dataArea := add(dataArea, 32)
                    assetData := add(assetData, 32)
                }
                /////// Call `assetProxy.transferFrom` using the constructed calldata ///////
                let success := call(
                    gas,                    // forward all gas
                    assetProxy,             // call address of asset proxy
                    0,                      // don't send any ETH
                    cdStart,                // pointer to start of input
                    sub(cdEnd, cdStart),    // length of input  
                    cdStart,                // write output over input
                    512                     // reserve 512 bytes for output
                )
                if iszero(success) {
                    revert(cdStart, returndatasize())
                }
            }
        }
    }
}
pragma solidity ^0.5.5;
import "./interfaces/IOwnable.sol";
contract Ownable is
    IOwnable
{
    address public owner;
    constructor ()
        public
    {
        owner = msg.sender;
    }
    modifier onlyOwner() {
        require(
            msg.sender == owner,
            "ONLY_CONTRACT_OWNER"
        );
        _;
    }
    function transferOwnership(address newOwner)
        public
        onlyOwner
    {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }
}
pragma solidity ^0.5.5;
contract IOwnable {
    function transferOwnership(address newOwner)
        public;
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "../interfaces/IAssetProxyDispatcher.sol";
contract MAssetProxyDispatcher is
    IAssetProxyDispatcher
{
    // Logs registration of new asset proxy
    event AssetProxyRegistered(
        bytes4 id,              // Id of new registered AssetProxy.
        address assetProxy      // Address of new registered AssetProxy.
    );
    /// @dev Forwards arguments to assetProxy and calls `transferFrom`. Either succeeds or throws.
    /// @param assetData Byte array encoded for the asset.
    /// @param from Address to transfer token from.
    /// @param to Address to transfer token to.
    /// @param amount Amount of token to transfer.
    function dispatchTransferFrom(
        bytes memory assetData,
        address from,
        address to,
        uint256 amount
    )
        internal;
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
contract IAssetProxyDispatcher {
    /// @dev Registers an asset proxy to its asset proxy id.
    ///      Once an asset proxy is registered, it cannot be unregistered.
    /// @param assetProxy Address of new asset proxy to register.
    function registerAssetProxy(address assetProxy)
        external;
    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address);
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "./IAuthorizable.sol";
contract IAssetProxy {
    /// @dev Transfers assets. Either succeeds or throws.
    /// @param assetData Byte array encoded for the respective asset proxy.
    /// @param from Address to transfer asset from.
    /// @param to Address to transfer asset to.
    /// @param amount Amount of asset to transfer.
    function transferFrom(
        bytes calldata assetData,
        address from,
        address to,
        uint256 amount
    )
        external;
    
    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4);
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "@0x/contracts-utils/contracts/src/interfaces/IOwnable.sol";
contract IAuthorizable is
    IOwnable
{
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory);
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "@0x/contracts-utils/contracts/src/Ownable.sol";
import "./mixins/MAuthorizable.sol";
contract MixinAuthorizable is
    Ownable,
    MAuthorizable
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        require(
            authorized[msg.sender],
            "SENDER_NOT_AUTHORIZED"
        );
        _;
    }
    mapping (address => bool) public authorized;
    address[] public authorities;
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            !authorized[target],
            "TARGET_ALREADY_AUTHORIZED"
        );
        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );
        delete authorized[target];
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                authorities[i] = authorities[authorities.length - 1];
                authorities.length -= 1;
                break;
            }
        }
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );
        require(
            index < authorities.length,
            "INDEX_OUT_OF_BOUNDS"
        );
        require(
            authorities[index] == target,
            "AUTHORIZED_ADDRESS_MISMATCH"
        );
        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.length -= 1;
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory)
    {
        return authorities;
    }
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "../interfaces/IAuthorizable.sol";
contract MAuthorizable is
    IAuthorizable
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );
    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized { revert(); _; }
}

/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.9;
import "@0x/contracts-utils/contracts/src/LibBytes.sol";
import "@0x/contracts-utils/contracts/src/SafeMath.sol";
import "@0x/contracts-erc1155/contracts/src/interfaces/IERC1155.sol";
import "./MixinAuthorizable.sol";
import "./interfaces/IAssetProxy.sol";
contract ERC1155Proxy is
    MixinAuthorizable,
    SafeMath,
    IAssetProxy
{
    using LibBytes for bytes;
    // Id of this proxy.
    bytes4 constant internal PROXY_ID = bytes4(keccak256("ERC1155Assets(address,uint256[],uint256[],bytes)"));
    /// @dev Transfers batch of ERC1155 assets. Either succeeds or throws.
    /// @param assetData Byte array encoded with ERC1155 token address, array of ids, array of values, and callback data.
    /// @param from Address to transfer assets from.
    /// @param to Address to transfer assets to.
    /// @param amount Amount that will be multiplied with each element of `assetData.values` to scale the
    ///        values that will be transferred.
    function transferFrom(
        bytes calldata assetData,
        address from,
        address to,
        uint256 amount
    )
        external
        onlyAuthorized
    {
        // Decode params from `assetData`
        // solhint-disable indent
        (
            address erc1155TokenAddress,
            uint256[] memory ids,
            uint256[] memory values,
            bytes memory data
        ) = abi.decode(
            assetData.sliceDestructive(4, assetData.length),
            (address, uint256[], uint256[], bytes)
        );
        // solhint-enable indent
        // Scale values up by `amount`
        uint256 length = values.length;
        uint256[] memory scaledValues = new uint256[](length);
        for (uint256 i = 0; i != length; i++) {
            // We write the scaled values to an unused location in memory in order
            // to avoid copying over `ids` or `data`. This is possible if they are
            // identical to `values` and the offsets for each are pointing to the 
            // same location in the ABI encoded calldata.
            scaledValues[i] = safeMul(values[i], amount);
        }
        // Execute `safeBatchTransferFrom` call
        // Either succeeds or throws
        IERC1155(erc1155TokenAddress).safeBatchTransferFrom(
            from,
            to,
            ids,
            scaledValues,
            data
        );
    }
    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4)
    {
        return PROXY_ID;
    }
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
library LibBytes {
    using LibBytes for bytes;
    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }
    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }
            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)
                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)
                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }
    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        require(
            from <= to,
            "FROM_LESS_THAN_TO_REQUIRED"
        );
        require(
            to <= b.length,
            "TO_LESS_THAN_LENGTH_REQUIRED"
        );
        
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    
    /// @dev Returns a slice from a byte array without preserving the input.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    /// @dev When `from == 0`, the original array will match the slice. In other cases its state will be corrupted.
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        require(
            from <= to,
            "FROM_LESS_THAN_TO_REQUIRED"
        );
        require(
            to <= b.length,
            "TO_LESS_THAN_LENGTH_REQUIRED"
        );
        
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }
    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        require(
            b.length > 0,
            "GREATER_THAN_ZERO_LENGTH_REQUIRED"
        );
        // Store last byte.
        result = b[b.length - 1];
        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }
    /// @dev Pops the last 20 bytes off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return The 20 byte address that was popped off.
    function popLast20Bytes(bytes memory b)
        internal
        pure
        returns (address result)
    {
        require(
            b.length >= 20,
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );
        // Store last 20 bytes.
        result = readAddress(b, b.length - 20);
        assembly {
            // Subtract 20 from byte array length.
            let newLen := sub(mload(b), 20)
            mstore(b, newLen)
        }
        return result;
    }
    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }
    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        require(
            b.length >= index + 20,  // 20 is length of address
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }
    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        require(
            b.length >= index + 20,  // 20 is length of address
            "GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED"
        );
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)
            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }
    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        require(
            b.length >= index + 32,
            "GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED"
        );
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }
    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        require(
            b.length >= index + 32,
            "GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED"
        );
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }
    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }
    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }
    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        require(
            b.length >= index + 4,
            "GREATER_OR_EQUAL_TO_4_LENGTH_REQUIRED"
        );
        // Arrays are prefixed by a 32 byte length field
        index += 32;
        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }
    /// @dev Reads nested bytes from a specific position.
    /// @dev NOTE: the returned value overlaps with the input value.
    ///            Both should be treated as immutable.
    /// @param b Byte array containing nested bytes.
    /// @param index Index of nested bytes.
    /// @return result Nested bytes.
    function readBytesWithLength(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Read length of nested bytes
        uint256 nestedBytesLength = readUint256(b, index);
        index += 32;
        // Assert length of <b> is valid, given
        // length of nested bytes
        require(
            b.length >= index + nestedBytesLength,
            "GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED"
        );
        
        // Return a pointer to the byte array as it exists inside `b`
        assembly {
            result := add(b, index)
        }
        return result;
    }
    /// @dev Inserts bytes at a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes to insert.
    function writeBytesWithLength(
        bytes memory b,
        uint256 index,
        bytes memory input
    )
        internal
        pure
    {
        // Assert length of <b> is valid, given
        // length of input
        require(
            b.length >= index + 32 + input.length,  // 32 bytes to store length
            "GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED"
        );
        // Copy <input> into <b>
        memCopy(
            b.contentAddress() + index,
            input.rawAddress(), // includes length of <input>
            input.length + 32   // +32 bytes to store <input> length
        );
    }
    /// @dev Performs a deep copy of a byte array onto another byte array of greater than or equal length.
    /// @param dest Byte array that will be overwritten with source bytes.
    /// @param source Byte array to copy onto dest bytes.
    function deepCopyBytes(
        bytes memory dest,
        bytes memory source
    )
        internal
        pure
    {
        uint256 sourceLen = source.length;
        // Dest length must be >= source length, or some bytes would not be copied.
        require(
            dest.length >= sourceLen,
            "GREATER_OR_EQUAL_TO_SOURCE_BYTES_LENGTH_REQUIRED"
        );
        memCopy(
            dest.contentAddress(),
            source.contentAddress(),
            sourceLen
        );
    }
}
pragma solidity ^0.5.5;
contract SafeMath {
    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(
            c / a == b,
            "UINT256_OVERFLOW"
        );
        return c;
    }
    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a / b;
        return c;
    }
    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        require(
            b <= a,
            "UINT256_UNDERFLOW"
        );
        return a - b;
    }
    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        require(
            c >= a,
            "UINT256_OVERFLOW"
        );
        return c;
    }
    function max64(uint64 a, uint64 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }
    function min64(uint64 a, uint64 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }
    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
/// @title ERC-1155 Multi Token Standard
/// @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1155.md
/// Note: The ERC-165 identifier for this interface is 0xd9b67a26.
interface IERC1155 {
    
    /// @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred,
    ///      including zero value transfers as well as minting or burning.
    /// Operator will always be msg.sender.
    /// Either event from address `0x0` signifies a minting operation.
    /// An event to address `0x0` signifies a burning or melting operation.
    /// The total value transferred from address 0x0 minus the total value transferred to 0x0 may
    /// be used by clients and exchanges to be added to the "circulating supply" for a given token ID.
    /// To define a token ID with no initial balance, the contract SHOULD emit the TransferSingle event
    /// from `0x0` to `0x0`, with the token creator as `_operator`.
    event TransferSingle(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256 id,
        uint256 value
    );
    /// @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred,
    ///      including zero value transfers as well as minting or burning.
    ///Operator will always be msg.sender.
    /// Either event from address `0x0` signifies a minting operation.
    /// An event to address `0x0` signifies a burning or melting operation.
    /// The total value transferred from address 0x0 minus the total value transferred to 0x0 may
    /// be used by clients and exchanges to be added to the "circulating supply" for a given token ID.
    /// To define multiple token IDs with no initial balance, this SHOULD emit the TransferBatch event
    /// from `0x0` to `0x0`, with the token creator as `_operator`.
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );
    /// @dev MUST emit when an approval is updated.
    event ApprovalForAll(
        address indexed owner,
        address indexed operator,
        bool approved
    );
    /// @dev MUST emit when the URI is updated for a token ID.
    /// URIs are defined in RFC 3986.
    /// The URI MUST point a JSON file that conforms to the "ERC-1155 Metadata JSON Schema".
    event URI(
        string value,
        uint256 indexed id
    );
    /// @notice Transfers value amount of an _id from the _from address to the _to address specified.
    /// @dev MUST emit TransferSingle event on success.
    /// Caller must be approved to manage the _from account's tokens (see isApprovedForAll).
    /// MUST throw if `_to` is the zero address.
    /// MUST throw if balance of sender for token `_id` is lower than the `_value` sent.
    /// MUST throw on any other error.
    /// When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0).
    /// If so, it MUST call `onERC1155Received` on `_to` and revert if the return value
    /// is not `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`.
    /// @param from    Source address
    /// @param to      Target address
    /// @param id      ID of the token type
    /// @param value   Transfer amount
    /// @param data    Additional data with no specified format, sent in call to `_to`
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 value,
        bytes calldata data
    )
        external;
    /// @notice Send multiple types of Tokens from a 3rd party in one transfer (with safety call).
    /// @dev MUST emit TransferBatch event on success.
    /// Caller must be approved to manage the _from account's tokens (see isApprovedForAll).
    /// MUST throw if `_to` is the zero address.
    /// MUST throw if length of `_ids` is not the same as length of `_values`.
    ///  MUST throw if any of the balance of sender for token `_ids` is lower than the respective `_values` sent.
    /// MUST throw on any other error.
    /// When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0).
    /// If so, it MUST call `onERC1155BatchReceived` on `_to` and revert if the return value
    /// is not `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`.
    /// @param from    Source addresses
    /// @param to      Target addresses
    /// @param ids     IDs of each token type
    /// @param values  Transfer amounts per token type
    /// @param data    Additional data with no specified format, sent in call to `_to`
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    )
        external;
    /// @notice Enable or disable approval for a third party ("operator") to manage all of the caller's tokens.
    /// @dev MUST emit the ApprovalForAll event on success.
    /// @param operator  Address to add to the set of authorized operators
    /// @param approved  True if the operator is approved, false to revoke approval
    function setApprovalForAll(address operator, bool approved) external;
    /// @notice Queries the approval status of an operator for a given owner.
    /// @param owner     The owner of the Tokens
    /// @param operator  Address of authorized operator
    /// @return           True if the operator is approved, false if not
    function isApprovedForAll(address owner, address operator) external view returns (bool);
    /// @notice Get the balance of an account's Tokens.
    /// @param owner  The address of the token holder
    /// @param id     ID of the Token
    /// @return        The _owner's balance of the Token type requested
    function balanceOf(address owner, uint256 id) external view returns (uint256);
    /// @notice Get the balance of multiple account/token pairs
    /// @param owners The addresses of the token holders
    /// @param ids    ID of the Tokens
    /// @return        The _owner's balance of the Token types requested
    function balanceOfBatch(
        address[] calldata owners,
        uint256[] calldata ids
    )
        external
        view
        returns (uint256[] memory balances_);
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "@0x/contracts-utils/contracts/src/Ownable.sol";
import "./mixins/MAuthorizable.sol";
contract MixinAuthorizable is
    Ownable,
    MAuthorizable
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        require(
            authorized[msg.sender],
            "SENDER_NOT_AUTHORIZED"
        );
        _;
    }
    mapping (address => bool) public authorized;
    address[] public authorities;
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            !authorized[target],
            "TARGET_ALREADY_AUTHORIZED"
        );
        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );
        delete authorized[target];
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                authorities[i] = authorities[authorities.length - 1];
                authorities.length -= 1;
                break;
            }
        }
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );
        require(
            index < authorities.length,
            "INDEX_OUT_OF_BOUNDS"
        );
        require(
            authorities[index] == target,
            "AUTHORIZED_ADDRESS_MISMATCH"
        );
        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.length -= 1;
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory)
    {
        return authorities;
    }
}
pragma solidity ^0.5.5;
import "./interfaces/IOwnable.sol";
contract Ownable is
    IOwnable
{
    address public owner;
    constructor ()
        public
    {
        owner = msg.sender;
    }
    modifier onlyOwner() {
        require(
            msg.sender == owner,
            "ONLY_CONTRACT_OWNER"
        );
        _;
    }
    function transferOwnership(address newOwner)
        public
        onlyOwner
    {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }
}
pragma solidity ^0.5.5;
contract IOwnable {
    function transferOwnership(address newOwner)
        public;
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "../interfaces/IAuthorizable.sol";
contract MAuthorizable is
    IAuthorizable
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );
    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized { revert(); _; }
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "@0x/contracts-utils/contracts/src/interfaces/IOwnable.sol";
contract IAuthorizable is
    IOwnable
{
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory);
}
/*
  Copyright 2018 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.5.5;
import "./IAuthorizable.sol";
contract IAssetProxy {
    /// @dev Transfers assets. Either succeeds or throws.
    /// @param assetData Byte array encoded for the respective asset proxy.
    /// @param from Address to transfer asset from.
    /// @param to Address to transfer asset to.
    /// @param amount Amount of asset to transfer.
    function transferFrom(
        bytes calldata assetData,
        address from,
        address to,
        uint256 amount
    )
        external;
    
    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4);
}

/*

  Copyright 2018 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity 0.4.24;

contract IOwnable {

    function transferOwnership(address newOwner)
        public;
}

contract Ownable is
    IOwnable
{
    address public owner;

    constructor ()
        public
    {
        owner = msg.sender;
    }

    modifier onlyOwner() {
        require(
            msg.sender == owner,
            "ONLY_CONTRACT_OWNER"
        );
        _;
    }

    function transferOwnership(address newOwner)
        public
        onlyOwner
    {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }
}

contract IAuthorizable is
    IOwnable
{
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory);
}

contract MAuthorizable is
    IAuthorizable
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );

    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );

    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized { revert(); _; }
}

contract MixinAuthorizable is
    Ownable,
    MAuthorizable
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        require(
            authorized[msg.sender],
            "SENDER_NOT_AUTHORIZED"
        );
        _;
    }

    mapping (address => bool) public authorized;
    address[] public authorities;

    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            !authorized[target],
            "TARGET_ALREADY_AUTHORIZED"
        );

        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );

        delete authorized[target];
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                authorities[i] = authorities[authorities.length - 1];
                authorities.length -= 1;
                break;
            }
        }
        emit AuthorizedAddressRemoved(target, msg.sender);
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        onlyOwner
    {
        require(
            authorized[target],
            "TARGET_NOT_AUTHORIZED"
        );
        require(
            index < authorities.length,
            "INDEX_OUT_OF_BOUNDS"
        );
        require(
            authorities[index] == target,
            "AUTHORIZED_ADDRESS_MISMATCH"
        );

        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.length -= 1;
        emit AuthorizedAddressRemoved(target, msg.sender);
    }

    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory)
    {
        return authorities;
    }
}

contract ERC721Proxy is
    MixinAuthorizable
{
    // Id of this proxy.
    bytes4 constant internal PROXY_ID = bytes4(keccak256("ERC721Token(address,uint256)"));

    // solhint-disable-next-line payable-fallback
    function () 
        external
    {
        assembly {
            // The first 4 bytes of calldata holds the function selector
            let selector := and(calldataload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000)

            // `transferFrom` will be called with the following parameters:
            // assetData Encoded byte array.
            // from Address to transfer asset from.
            // to Address to transfer asset to.
            // amount Amount of asset to transfer.
            // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4
            if eq(selector, 0xa85e59e400000000000000000000000000000000000000000000000000000000) {

                // To lookup a value in a mapping, we load from the storage location keccak256(k, p),
                // where k is the key left padded to 32 bytes and p is the storage slot
                let start := mload(64)
                mstore(start, and(caller, 0xffffffffffffffffffffffffffffffffffffffff))
                mstore(add(start, 32), authorized_slot)

                // Revert if authorized[msg.sender] == false
                if iszero(sload(keccak256(start, 64))) {
                    // Revert with `Error("SENDER_NOT_AUTHORIZED")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x0000001553454e4445525f4e4f545f415554484f52495a454400000000000000)
                    mstore(96, 0)
                    revert(0, 100)
                }

                // `transferFrom`.
                // The function is marked `external`, so no abi decodeding is done for
                // us. Instead, we expect the `calldata` memory to contain the
                // following:
                //
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 4 * 32  | function parameters:                |
                // |          | 4      |         |   1. offset to assetData (*)        |
                // |          | 36     |         |   2. from                           |
                // |          | 68     |         |   3. to                             |
                // |          | 100    |         |   4. amount                         |
                // | Data     |        |         | assetData:                          |
                // |          | 132    | 32      | assetData Length                    |
                // |          | 164    | **      | assetData Contents                  |
                //
                // (*): offset is computed from start of function parameters, so offset
                //      by an additional 4 bytes in the calldata.
                //
                // (**): see table below to compute length of assetData Contents
                //
                // WARNING: The ABIv2 specification allows additional padding between
                //          the Params and Data section. This will result in a larger
                //          offset to assetData.

                // Asset data itself is encoded as follows:
                //
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 2 * 32  | function parameters:                |
                // |          | 4      | 12 + 20 |   1. token address                  |
                // |          | 36     |         |   2. tokenId                        |
                
                // We construct calldata for the `token.transferFrom` ABI.
                // The layout of this calldata is in the table below.
                // 
                // | Area     | Offset | Length  | Contents                            |
                // |----------|--------|---------|-------------------------------------|
                // | Header   | 0      | 4       | function selector                   |
                // | Params   |        | 3 * 32  | function parameters:                |
                // |          | 4      |         |   1. from                           |
                // |          | 36     |         |   2. to                             |
                // |          | 68     |         |   3. tokenId                        |

                // There exists only 1 of each token.
                // require(amount == 1, "INVALID_AMOUNT")
                if sub(calldataload(100), 1) {
                    // Revert with `Error("INVALID_AMOUNT")`
                    mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                    mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                    mstore(64, 0x0000000e494e56414c49445f414d4f554e540000000000000000000000000000)
                    mstore(96, 0)
                    revert(0, 100)
                }

                /////// Setup Header Area ///////
                // This area holds the 4-byte `transferFrom` selector.
                // Any trailing data in transferFromSelector will be
                // overwritten in the next `mstore` call.
                mstore(0, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
                
                /////// Setup Params Area ///////
                // We copy the fields `from` and `to` in bulk
                // from our own calldata to the new calldata.
                calldatacopy(4, 36, 64)

                // Copy `tokenId` field from our own calldata to the new calldata.
                let assetDataOffset := calldataload(4)
                calldatacopy(68, add(assetDataOffset, 72), 32)

                /////// Call `token.transferFrom` using the calldata ///////
                let token := calldataload(add(assetDataOffset, 40))
                let success := call(
                    gas,            // forward all gas
                    token,          // call address of token contract
                    0,              // don't send any ETH
                    0,              // pointer to start of input
                    100,            // length of input
                    0,              // write output to null
                    0               // output size is 0 bytes
                )
                if success {
                    return(0, 0)
                }
                
                // Revert with `Error("TRANSFER_FAILED")`
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000)
                mstore(96, 0)
                revert(0, 100)
            }

            // Revert if undefined function is called
            revert(0, 0)
        }
    }

    /// @dev Gets the proxy id associated with the proxy address.
    /// @return Proxy id.
    function getProxyId()
        external
        pure
        returns (bytes4)
    {
        return PROXY_ID;
    }
}