pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract CommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) != Constants.ETH) {
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        bytes memory encodedData = abi.encodePacked(method, data);
        aggregator.functionCallWithValue(encodedData, msg.value);
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            uint256 balance = tokenFrom.balanceOf(address(this));
            _transfer(tokenFrom, balance, recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
library Constants {
    address internal constant ETH = 0x0000000000000000000000000000000000000000;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract FeeCommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet) public {
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract FeeWethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    IWETH public immutable weth;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(IWETH _weth, address payable feeWallet) public {
        weth = _weth;
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256) external;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import "../Constants.sol";
contract UniswapAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    IUniswapV2Router02 public immutable UNISWAP;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet, IUniswapV2Router02 uniswap) public {
        FEE_WALLET = feeWallet;
        UNISWAP = uniswap;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param path Used by Uniswap
     * @param deadline Timestamp at which the swap becomes invalid. Used by Uniswap
     * @param feeOnTransfer Use `supportingFeeOnTransfer` Uniswap methods
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        address[] calldata path,
        uint256 deadline,
        bool feeOnTransfer,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
        }
        if (address(tokenFrom) == Constants.ETH) {
            if (feeOnTransfer) {
                UNISWAP.swapExactETHForTokensSupportingFeeOnTransferTokens{
                    value: address(this).balance
                }(amountTo, path, address(this), deadline);
            } else {
                UNISWAP.swapExactETHForTokens{value: address(this).balance}(
                    amountTo,
                    path,
                    address(this),
                    deadline
                );
            }
        } else {
            _approveSpender(tokenFrom, address(UNISWAP), amountFrom);
            if (address(tokenTo) == Constants.ETH) {
                if (feeOnTransfer) {
                    UNISWAP.swapExactTokensForETHSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForETH(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            } else {
                if (feeOnTransfer) {
                    UNISWAP
                        .swapExactTokensForTokensSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            }
        }
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract WethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    IWETH public immutable weth;
    constructor(IWETH _weth) public {
        weth = _weth;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface ICHI is IERC20 {
    function freeUpTo(uint256 value) external returns (uint256);
    function freeFromUpTo(
        address from,
        uint256 value
    ) external returns (uint256);
    function mint(uint256 value) external;
}
  
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.0;
// We import the contract so truffle compiles it, and we have the ABI
// available when working from truffle console.
import "@openzeppelin/contracts/token/ERC20/ERC20.sol"; //helpers// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    uint8 private _decimals;
    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }
    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./ICHI.sol";
import "./Spender.sol";
/**
 * @title MetaSwap
 */
contract MetaSwap is Ownable, Pausable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    struct Adapter {
        address addr; // adapter's address
        bytes4 selector;
        bytes data; // adapter's fixed data
    }
    ICHI public immutable chi;
    Spender public immutable spender;
    // Mapping of aggregatorId to aggregator
    mapping(string => Adapter) public adapters;
    mapping(string => bool) public adapterRemoved;
    event AdapterSet(
        string indexed aggregatorId,
        address indexed addr,
        bytes4 selector,
        bytes data
    );
    event AdapterRemoved(string indexed aggregatorId);
    event Swap(string indexed aggregatorId, address indexed sender);
    constructor(ICHI _chi) public {
        chi = _chi;
        spender = new Spender();
    }
    /**
     * @dev Sets the adapter for an aggregator. It can't be changed later.
     * @param aggregatorId Aggregator's identifier
     * @param addr Address of the contract that contains the logic for this aggregator
     * @param selector The function selector of the swap function in the adapter
     * @param data Fixed abi encoded data the will be passed in each delegatecall made to the adapter
     */
    function setAdapter(
        string calldata aggregatorId,
        address addr,
        bytes4 selector,
        bytes calldata data
    ) external onlyOwner {
        require(addr.isContract(), "ADAPTER_IS_NOT_A_CONTRACT");
        require(!adapterRemoved[aggregatorId], "ADAPTER_REMOVED");
        Adapter storage adapter = adapters[aggregatorId];
        require(adapter.addr == address(0), "ADAPTER_EXISTS");
        adapter.addr = addr;
        adapter.selector = selector;
        adapter.data = data;
        emit AdapterSet(aggregatorId, addr, selector, data);
    }
    /**
     * @dev Removes the adapter for an existing aggregator. This can't be undone.
     * @param aggregatorId Aggregator's identifier
     */
    function removeAdapter(string calldata aggregatorId) external onlyOwner {
        require(
            adapters[aggregatorId].addr != address(0),
            "ADAPTER_DOES_NOT_EXIST"
        );
        delete adapters[aggregatorId];
        adapterRemoved[aggregatorId] = true;
        emit AdapterRemoved(aggregatorId);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        _swap(aggregatorId, tokenFrom, amount, data);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swapUsingGasToken(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        uint256 gas = gasleft();
        _swap(aggregatorId, tokenFrom, amount, data);
        uint256 gasSpent = 21000 + gas - gasleft() + 16 * msg.data.length;
        chi.freeFromUpTo(msg.sender, (gasSpent + 14154) / 41947);
    }
    function pauseSwaps() external onlyOwner {
        _pause();
    }
    function unpauseSwaps() external onlyOwner {
        _unpause();
    }
    function _swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) internal {
        Adapter storage adapter = adapters[aggregatorId];
        if (address(tokenFrom) != Constants.ETH) {
            tokenFrom.safeTransferFrom(msg.sender, address(spender), amount);
        }
        spender.swap{value: msg.value}(
            adapter.addr,
            abi.encodePacked(
                adapter.selector,
                abi.encode(msg.sender),
                adapter.data,
                data
            )
        );
        emit Swap(aggregatorId, msg.sender);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor () internal {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./Constants.sol";
contract Spender {
    address public immutable metaswap;
    constructor() public {
        metaswap = msg.sender;
    }
    /// @dev Receives ether from swaps
    fallback() external payable {}
    function swap(address adapter, bytes calldata data) external payable {
        require(msg.sender == metaswap, "FORBIDDEN");
        require(adapter != address(0), "ADAPTER_NOT_PROVIDED");
        _delegate(adapter, data, "ADAPTER_DELEGATECALL_FAILED");
    }
    /**
     * @dev Performs a delegatecall and bubbles up the errors, adapted from
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol
     * @param target Address of the contract to delegatecall
     * @param data Data passed in the delegatecall
     * @param errorMessage Fallback revert reason
     */
    function _delegate(
        address target,
        bytes memory data,
        string memory errorMessage
    ) private returns (bytes memory) {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
contract MockAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    event MockAdapterEvent(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    );
    function test(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    ) external payable {
        emit MockAdapterEvent(sender, valueFixed, valueDynamic);
    }
    function testRevert(
        address,
        uint256,
        uint256
    ) external payable {
        revert("SWAP_FAILED");
    }
    function testRevertNoReturnData(
        address,
        uint256,
        uint256
    ) external payable {
        revert();
    }
}
pragma solidity ^0.6.0;
// TAKEN FROM https://github.com/gnosis/mock-contract
// TODO: use their npm package once it is published for solidity 0.6
interface MockInterface {
    /**
     * @dev After calling this method, the mock will return `response` when it is called
     * with any calldata that is not mocked more specifically below
     * (e.g. using givenMethodReturn).
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenAnyReturn(bytes calldata response) external;
    function givenAnyReturnBool(bool response) external;
    function givenAnyReturnUint(uint256 response) external;
    function givenAnyReturnAddress(address response) external;
    function givenAnyRevert() external;
    function givenAnyRevertWithMessage(string calldata message) external;
    function givenAnyRunOutOfGas() external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called regardless of arguments. If the methodId and arguments
     * are mocked more specifically (using `givenMethodAndArguments`) the latter
     * will take precedence.
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenMethodReturn(bytes calldata method, bytes calldata response)
        external;
    function givenMethodReturnBool(bytes calldata method, bool response)
        external;
    function givenMethodReturnUint(bytes calldata method, uint256 response)
        external;
    function givenMethodReturnAddress(bytes calldata method, address response)
        external;
    function givenMethodRevert(bytes calldata method) external;
    function givenMethodRevertWithMessage(
        bytes calldata method,
        string calldata message
    ) external;
    function givenMethodRunOutOfGas(bytes calldata method) external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called with matching arguments. These exact calldataMocks will take
     * precedence over all other calldataMocks.
     * @param call ABI encoded calldata (methodId and arguments)
     * @param response ABI encoded response that will be returned if contract is invoked with calldata
     */
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external;
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external;
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external;
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external;
    function givenCalldataRevert(bytes calldata call) external;
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external;
    function givenCalldataRunOutOfGas(bytes calldata call) external;
    /**
     * @dev Returns the number of times anything has been called on this mock since last reset
     */
    function invocationCount() external returns (uint256);
    /**
     * @dev Returns the number of times the given method has been called on this mock since last reset
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     */
    function invocationCountForMethod(bytes calldata method)
        external
        returns (uint256);
    /**
     * @dev Returns the number of times this mock has been called with the exact calldata since last reset.
     * @param call ABI encoded calldata (methodId and arguments)
     */
    function invocationCountForCalldata(bytes calldata call)
        external
        returns (uint256);
    /**
     * @dev Resets all mocked methods and invocation counts.
     */
    function reset() external;
}
/**
 * Implementation of the MockInterface.
 */
contract MockContract is MockInterface {
    enum MockType {Return, Revert, OutOfGas}
    bytes32 public constant MOCKS_LIST_START = hex"01";
    bytes public constant MOCKS_LIST_END = "0xff";
    bytes32 public constant MOCKS_LIST_END_HASH = keccak256(MOCKS_LIST_END);
    bytes4 public constant SENTINEL_ANY_MOCKS = hex"01";
    bytes public constant DEFAULT_FALLBACK_VALUE = abi.encode(false);
    // A linked list allows easy iteration and inclusion checks
    mapping(bytes32 => bytes) calldataMocks;
    mapping(bytes => MockType) calldataMockTypes;
    mapping(bytes => bytes) calldataExpectations;
    mapping(bytes => string) calldataRevertMessage;
    mapping(bytes32 => uint256) calldataInvocations;
    mapping(bytes4 => bytes4) methodIdMocks;
    mapping(bytes4 => MockType) methodIdMockTypes;
    mapping(bytes4 => bytes) methodIdExpectations;
    mapping(bytes4 => string) methodIdRevertMessages;
    mapping(bytes32 => uint256) methodIdInvocations;
    MockType fallbackMockType;
    bytes fallbackExpectation = DEFAULT_FALLBACK_VALUE;
    string fallbackRevertMessage;
    uint256 invocations;
    uint256 resetCount;
    constructor() public {
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
    }
    function trackCalldataMock(bytes memory call) private {
        bytes32 callHash = keccak256(call);
        if (calldataMocks[callHash].length == 0) {
            calldataMocks[callHash] = calldataMocks[MOCKS_LIST_START];
            calldataMocks[MOCKS_LIST_START] = call;
        }
    }
    function trackMethodIdMock(bytes4 methodId) private {
        if (methodIdMocks[methodId] == 0x0) {
            methodIdMocks[methodId] = methodIdMocks[SENTINEL_ANY_MOCKS];
            methodIdMocks[SENTINEL_ANY_MOCKS] = methodId;
        }
    }
    function _givenAnyReturn(bytes memory response) internal {
        fallbackMockType = MockType.Return;
        fallbackExpectation = response;
    }
    function givenAnyReturn(bytes calldata response) external override {
        _givenAnyReturn(response);
    }
    function givenAnyReturnBool(bool response) external override {
        uint256 flag = response ? 1 : 0;
        _givenAnyReturn(uintToBytes(flag));
    }
    function givenAnyReturnUint(uint256 response) external override {
        _givenAnyReturn(uintToBytes(response));
    }
    function givenAnyReturnAddress(address response) external override {
        _givenAnyReturn(uintToBytes(uint256(response)));
    }
    function givenAnyRevert() external override {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = "";
    }
    function givenAnyRevertWithMessage(string calldata message)
        external
        override
    {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = message;
    }
    function givenAnyRunOutOfGas() external override {
        fallbackMockType = MockType.OutOfGas;
    }
    function _givenCalldataReturn(bytes memory call, bytes memory response)
        private
    {
        calldataMockTypes[call] = MockType.Return;
        calldataExpectations[call] = response;
        trackCalldataMock(call);
    }
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenCalldataReturn(call, response);
    }
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenCalldataReturn(call, uintToBytes(flag));
    }
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(response));
    }
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(uint256(response)));
    }
    function _givenMethodReturn(bytes memory call, bytes memory response)
        private
    {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Return;
        methodIdExpectations[method] = response;
        trackMethodIdMock(method);
    }
    function givenMethodReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenMethodReturn(call, response);
    }
    function givenMethodReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenMethodReturn(call, uintToBytes(flag));
    }
    function givenMethodReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(response));
    }
    function givenMethodReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(uint256(response)));
    }
    function givenCalldataRevert(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = "";
        trackCalldataMock(call);
    }
    function givenMethodRevert(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        trackMethodIdMock(method);
    }
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = message;
        trackCalldataMock(call);
    }
    function givenMethodRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        methodIdRevertMessages[method] = message;
        trackMethodIdMock(method);
    }
    function givenCalldataRunOutOfGas(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.OutOfGas;
        trackCalldataMock(call);
    }
    function givenMethodRunOutOfGas(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.OutOfGas;
        trackMethodIdMock(method);
    }
    function invocationCount() external override returns (uint256) {
        return invocations;
    }
    function invocationCountForMethod(bytes calldata call)
        external
        override
        returns (uint256)
    {
        bytes4 method = bytesToBytes4(call);
        return
            methodIdInvocations[keccak256(
                abi.encodePacked(resetCount, method)
            )];
    }
    function invocationCountForCalldata(bytes calldata call)
        external
        override
        returns (uint256)
    {
        return
            calldataInvocations[keccak256(abi.encodePacked(resetCount, call))];
    }
    function reset() external override {
        // Reset all exact calldataMocks
        bytes memory nextMock = calldataMocks[MOCKS_LIST_START];
        bytes32 mockHash = keccak256(nextMock);
        // We cannot compary bytes
        while (mockHash != MOCKS_LIST_END_HASH) {
            // Reset all mock maps
            calldataMockTypes[nextMock] = MockType.Return;
            calldataExpectations[nextMock] = hex"";
            calldataRevertMessage[nextMock] = "";
            // Set next mock to remove
            nextMock = calldataMocks[mockHash];
            // Remove from linked list
            calldataMocks[mockHash] = "";
            // Update mock hash
            mockHash = keccak256(nextMock);
        }
        // Clear list
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        // Reset all any calldataMocks
        bytes4 nextAnyMock = methodIdMocks[SENTINEL_ANY_MOCKS];
        while (nextAnyMock != SENTINEL_ANY_MOCKS) {
            bytes4 currentAnyMock = nextAnyMock;
            methodIdMockTypes[currentAnyMock] = MockType.Return;
            methodIdExpectations[currentAnyMock] = hex"";
            methodIdRevertMessages[currentAnyMock] = "";
            nextAnyMock = methodIdMocks[currentAnyMock];
            // Remove from linked list
            methodIdMocks[currentAnyMock] = 0x0;
        }
        // Clear list
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
        fallbackExpectation = DEFAULT_FALLBACK_VALUE;
        fallbackMockType = MockType.Return;
        invocations = 0;
        resetCount += 1;
    }
    function useAllGas() private {
        while (true) {
            bool s;
            assembly {
                //expensive call to EC multiply contract
                s := call(sub(gas(), 2000), 6, 0, 0x0, 0xc0, 0x0, 0x60)
            }
        }
    }
    function bytesToBytes4(bytes memory b) private pure returns (bytes4) {
        bytes4 out;
        for (uint256 i = 0; i < 4; i++) {
            out |= bytes4(b[i] & 0xFF) >> (i * 8);
        }
        return out;
    }
    function uintToBytes(uint256 x) private pure returns (bytes memory b) {
        b = new bytes(32);
        assembly {
            mstore(add(b, 32), x)
        }
    }
    function updateInvocationCount(
        bytes4 methodId,
        bytes memory originalMsgData
    ) public {
        require(
            msg.sender == address(this),
            "Can only be called from the contract itself"
        );
        invocations += 1;
        methodIdInvocations[keccak256(
            abi.encodePacked(resetCount, methodId)
        )] += 1;
        calldataInvocations[keccak256(
            abi.encodePacked(resetCount, originalMsgData)
        )] += 1;
    }
    fallback() external payable {
        bytes4 methodId;
        assembly {
            methodId := calldataload(0)
        }
        // First, check exact matching overrides
        if (calldataMockTypes[msg.data] == MockType.Revert) {
            revert(calldataRevertMessage[msg.data]);
        }
        if (calldataMockTypes[msg.data] == MockType.OutOfGas) {
            useAllGas();
        }
        bytes memory result = calldataExpectations[msg.data];
        // Then check method Id overrides
        if (result.length == 0) {
            if (methodIdMockTypes[methodId] == MockType.Revert) {
                revert(methodIdRevertMessages[methodId]);
            }
            if (methodIdMockTypes[methodId] == MockType.OutOfGas) {
                useAllGas();
            }
            result = methodIdExpectations[methodId];
        }
        // Last, use the fallback override
        if (result.length == 0) {
            if (fallbackMockType == MockType.Revert) {
                revert(fallbackRevertMessage);
            }
            if (fallbackMockType == MockType.OutOfGas) {
                useAllGas();
            }
            result = fallbackExpectation;
        }
        // Record invocation as separate call so we don't rollback in case we are called with STATICCALL
        (, bytes memory r) = address(this).call{gas: 100000}(
            abi.encodeWithSignature(
                "updateInvocationCount(bytes4,bytes)",
                methodId,
                msg.data
            )
        );
        assert(r.length == 0);
        assembly {
            return(add(0x20, result), mload(result))
        }
    }
}
pragma solidity ^0.6.0;
contract MockSelfDestruct {
    constructor() public payable {}
    fallback() external payable {
        selfdestruct(msg.sender);
    }
    function kill(address payable target) external payable {
        selfdestruct(target);
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

/*
                                                           ,▄▓▓██▌   ,╓▄▄▓▓▓▓▓▓▓▓▄▄▄,,
                                                        ,▓██▓███▓▄▓███▓╬╬╬╬╬╬╬╬╬╬╬╬╬▓███▓▄,
                                                  ▄█   ▓██╬╣███████╬▓▀╬╬▓▓▓████████████▓█████▄,
                                                 ▓██▌ ▓██╬╣██████╬▓▌  ██████████████████████▌╙╙▀ⁿ
                                                ▐████████╬▓████▓▓█╨ ▄ ╟█████████▓▓╬╬╬╬╬▓▓█████▓▄
                                  └▀▓▓▄╓        ╟█▓╣█████▓██████▀ ╓█▌ ███████▓▓▓▓▓╬╬╬╬╬╬╬╬╬╬╬╬▓██▓▄
                                     └▀████▓▄╥  ▐██╬╬██████████╙ Æ▀─ ▓███▀╚╠╬╩▀▀███████▓▓╬╬╬╬╬╬╬╬╬██▄
                                        └▀██▓▀▀█████▓╬▓██████▀     ▄█████▒╠"      └╙▓██████▓╬╬╬╬╬╬╬╬██▄
                                           └▀██▄,└╙▀▀████▌└╙    ^"▀╙╙╙"╙██      @▄    ╙▀███████╬╬╬╬╬╬╬██µ
                                              └▀██▓▄, ██▌       ╒       ╙█▓     ]▓█▓╔    ▀███████▓╬╬╬╬╬▓█▌
                                                  ▀█████       ▓         ╟█▌    ]╠██▓░▒╓   ▀████████╬╬╬╬╣█▌
                                                  ▐████      ╓█▀█▌      ,██▌    ╚Å███▓▒▒╠╓  ╙█████████╬╬╬╣█▌
                                                  └████     ▓█░░▓█      ▀▀▀    φ▒╫████▒▒▒▒╠╓  █████████▓╬╬▓█µ
                                                   ╘███µ ▌▄█▓▄▓▀`     ,▀    ,╔╠░▓██████▌╠▒▒▒φ  ██████████╬╬██
                                                   ▐████µ╙▓▀`     ,▀╙,╔╔φφφ╠░▄▓███████▌░▓╙▒▒▒╠ └██╬███████╬▓█⌐
                                                   ╫██ ▓▌         ▌φ▒▒░▓██████████████▌▒░▓╚▒▒▒╠ ▓██╬▓██████╣█▌
                                                   ██▌           ▌╔▒▒▄████████████████▒▒▒░▌╠▒▒▒≥▐██▓╬╬███████▌
                                                   ██▌      ,╓φ╠▓«▒▒▓████▀  ▀█████████▌▒▒▒╟░▒▒▒▒▐███╬╬╣████▓█▌
                                                  ▐██      ╠▒▄▓▓███▓████└     ▀████████▌▒▒░▌╚▒▒▒▐███▓╬╬████ ╙▌
                                                  ███  )  ╠▒░░░▒░╬████▀        └████████░▒▒░╬∩▒▒▓████╬╬╣███
                                                 ▓██    ╠╠▒▒▐█▀▀▌`░╫██           ███████▒▒▒▒░▒▒½█████╬╬╣███
                                                ███ ,█▄ ╠▒▒▒╫▌,▄▀,▒╫██           ╟██████▒▒▒░╣⌠▒▓█████╬╬╣██▌
                                               ╘██µ ██` ╠▒▒░██╬φ╠▄▓██`            ██████░░▌φ╠░▓█████▓╬╬▓██
                                                ╟██  .φ╠▒░▄█▀░░▄██▀└              █████▌▒╣φ▒░▓██████╬╬╣██
                                                 ▀██▄▄▄╓▄███████▀                ▐█████░▓φ▒▄███████▓╬╣██
                                                   ╙▀▀▀██▀└                      ████▓▄▀φ▄▓████████╬▓█▀
                                                                                ▓███╬╩╔╣██████████▓██└
                                                                              ╓████▀▄▓████████▀████▀
                                                                            ,▓███████████████─]██╙
                                                                         ,▄▓██████████████▀└  ╙
                                                                    ,╓▄▓███████████████▀╙
                                                             `"▀▀▀████████▀▀▀▀`▄███▀▀└
                                                                              └└



                    11\   11\                     11\             11\   11\            11\                                       11\
                  1111 |  \__|                    11 |            111\  11 |           11 |                                      11 |
                  \_11 |  11\ 1111111\   1111111\ 1111111\        1111\ 11 | 111111\ 111111\   11\  11\  11\  111111\   111111\  11 |  11\
                    11 |  11 |11  __11\ 11  _____|11  __11\       11 11\11 |11  __11\\_11  _|  11 | 11 | 11 |11  __11\ 11  __11\ 11 | 11  |
                    11 |  11 |11 |  11 |11 /      11 |  11 |      11 \1111 |11111111 | 11 |    11 | 11 | 11 |11 /  11 |11 |  \__|111111  /
                    11 |  11 |11 |  11 |11 |      11 |  11 |      11 |\111 |11   ____| 11 |11\ 11 | 11 | 11 |11 |  11 |11 |      11  _11<
                  111111\ 11 |11 |  11 |\1111111\ 11 |  11 |      11 | \11 |\1111111\  \1111  |\11111\1111  |\111111  |11 |      11 | \11\
                  \______|\__|\__|  \__| \_______|\__|  \__|      \__|  \__| \_______|  \____/  \_____\____/  \______/ \__|      \__|  \__|



                               111111\                                                               11\     11\
                              11  __11\                                                              11 |    \__|
                              11 /  11 | 111111\   111111\   111111\   111111\   111111\   111111\ 111111\   11\  111111\  1111111\
                              11111111 |11  __11\ 11  __11\ 11  __11\ 11  __11\ 11  __11\  \____11\\_11  _|  11 |11  __11\ 11  __11\
                              11  __11 |11 /  11 |11 /  11 |11 |  \__|11111111 |11 /  11 | 1111111 | 11 |    11 |11 /  11 |11 |  11 |
                              11 |  11 |11 |  11 |11 |  11 |11 |      11   ____|11 |  11 |11  __11 | 11 |11\ 11 |11 |  11 |11 |  11 |
                              11 |  11 |\1111111 |\1111111 |11 |      \1111111\ \1111111 |\1111111 | \1111  |11 |\111111  |11 |  11 |
                              \__|  \__| \____11 | \____11 |\__|       \_______| \____11 | \_______|  \____/ \__| \______/ \__|  \__|
                                        11\   11 |11\   11 |                    11\   11 |
                                        \111111  |\111111  |                    \111111  |
                                         \______/  \______/                      \______/
                                                1111111\                        11\
                                                11  __11\                       11 |
                                                11 |  11 | 111111\  11\   11\ 111111\    111111\   111111\
                                                1111111  |11  __11\ 11 |  11 |\_11  _|  11  __11\ 11  __11\
                                                11  __11< 11 /  11 |11 |  11 |  11 |    11111111 |11 |  \__|
                                                11 |  11 |11 |  11 |11 |  11 |  11 |11\ 11   ____|11 |
                                                11 |  11 |\111111  |\111111  |  \1111  |\1111111\ 11 |
                                                \__|  \__| \______/  \______/    \____/  \_______|\__|
*/

// SPDX-License-Identifier: MIT

// File contracts/interfaces/IClipperExchangeInterface.sol


pragma solidity 0.8.17;

/// @title Clipper interface subset used in swaps
interface IClipperExchangeInterface {
    struct Signature {
        uint8 v;
        bytes32 r;
        bytes32 s;
    }

    function sellEthForToken(address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external payable;
    function sellTokenForEth(address inputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
    function swap(address inputToken, address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
}


// File contracts/helpers/RouterErrors.sol


pragma solidity 0.8.17;

library RouterErrors {
    error ReturnAmountIsNotEnough();
    error InvalidMsgValue();
    error ERC20TransferFailed();
}


// File @1inch/solidity-utils/contracts/[email protected]


pragma solidity ^0.8.0;

abstract contract EthReceiver {
    error EthDepositRejected();

    receive() external payable {
        _receive();
    }

    function _receive() internal virtual {
        // solhint-disable-next-line avoid-tx-origin
        if (msg.sender == tx.origin) revert EthDepositRejected();
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}


// File @1inch/solidity-utils/contracts/interfaces/[email protected]


pragma solidity ^0.8.0;


interface IDaiLikePermit {
    function permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s) external;
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;

library RevertReasonForwarder {
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;




library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();

    // Ensures method do not revert or return boolean `true`, admits call to non-smart-contract
    function safeTransferFrom(IERC20 token, address from, address to, uint256 amount) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }

    // Ensures method do not revert or return boolean `true`, admits call to non-smart-contract
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }

    // If `approve(from, to, amount)` fails, try to `approve(from, to, 0)` before retry
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (!_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value))
            {
                revert ForceApproveFailed();
            }
        }
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }

    function safePermit(IERC20 token, bytes calldata permit) internal {
        bool success;
        if (permit.length == 32 * 7) {
            success = _makeCalldataCall(token, IERC20Permit.permit.selector, permit);
        } else if (permit.length == 32 * 8) {
            success = _makeCalldataCall(token, IDaiLikePermit.permit.selector, permit);
        } else {
            revert SafePermitBadLength();
        }
        if (!success) RevertReasonForwarder.reRevert();
    }

    function _makeCall(IERC20 token, bytes4 selector, address to, uint256 amount) private returns(bool success) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
    }

    function _makeCalldataCall(IERC20 token, bytes4 selector, bytes calldata args) private returns(bool success) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let len := add(4, args.length)
            let data := mload(0x40)

            mstore(data, selector)
            calldatacopy(add(data, 0x04), args.offset, args.length)
            success := call(gas(), token, 0, data, len, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
    }
}


// File @1inch/solidity-utils/contracts/interfaces/[email protected]


pragma solidity ^0.8.0;

interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}


// File contracts/routers/ClipperRouter.sol


pragma solidity 0.8.17;






/// @title Clipper router that allows to use `ClipperExchangeInterface` for swaps
contract ClipperRouter is EthReceiver {
    using SafeERC20 for IERC20;

    uint256 private constant _SIGNATURE_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _SIGNATURE_V_SHIFT = 255;
    bytes6 private constant _INCH_TAG_WITH_LENGTH_PREFIX = "\x051INCH";
    IERC20 private constant _ETH = IERC20(address(0));
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(IWETH weth) {
        _WETH = weth;
    }

    /// @notice Same as `clipperSwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @dev See tests for examples
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param inputAmount Amount of source tokens to swap
    /// @param outputAmount Amount of destination tokens to receive
    /// @param goodUntil Timestamp until the swap will be valid
    /// @param r Clipper order signature (r part)
    /// @param vs Clipper order signature (vs part)
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// @return returnAmount Amount of destination tokens received
    function clipperSwapToWithPermit(
        IClipperExchangeInterface clipperExchange,
        address payable recipient,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        srcToken.safePermit(permit);
        return clipperSwapTo(clipperExchange, recipient, srcToken, dstToken, inputAmount, outputAmount, goodUntil, r, vs);
    }

    /// @notice Same as `clipperSwapTo` but uses `msg.sender` as recipient
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param inputAmount Amount of source tokens to swap
    /// @param outputAmount Amount of destination tokens to receive
    /// @param goodUntil Timestamp until the swap will be valid
    /// @param r Clipper order signature (r part)
    /// @param vs Clipper order signature (vs part)
    /// @return returnAmount Amount of destination tokens received
    function clipperSwap(
        IClipperExchangeInterface clipperExchange,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) external payable returns(uint256 returnAmount) {
        return clipperSwapTo(clipperExchange, payable(msg.sender), srcToken, dstToken, inputAmount, outputAmount, goodUntil, r, vs);
    }

    /// @notice Performs swap using Clipper exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param inputAmount Amount of source tokens to swap
    /// @param outputAmount Amount of destination tokens to receive
    /// @param goodUntil Timestamp until the swap will be valid
    /// @param r Clipper order signature (r part)
    /// @param vs Clipper order signature (vs part)
    /// @return returnAmount Amount of destination tokens received
    function clipperSwapTo(
        IClipperExchangeInterface clipperExchange,
        address payable recipient,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) public payable returns(uint256 returnAmount) {
        bool srcETH = srcToken == _ETH;
        if (srcETH) {
            if (msg.value != inputAmount) revert RouterErrors.InvalidMsgValue();
        } else if (srcToken == _WETH) {
            srcETH = true;
            if (msg.value != 0) revert RouterErrors.InvalidMsgValue();
            // _WETH.transferFrom(msg.sender, address(this), inputAmount);
            // _WETH.withdraw(inputAmount);
            address weth = address(_WETH);
            bytes4 transferFromSelector = _WETH.transferFrom.selector;
            bytes4 withdrawSelector = _WETH.withdraw.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, transferFromSelector)
                mstore(add(ptr, 0x04), caller())
                mstore(add(ptr, 0x24), address())
                mstore(add(ptr, 0x44), inputAmount)
                if iszero(call(gas(), weth, 0, ptr, 0x64, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }

                mstore(ptr, withdrawSelector)
                mstore(add(ptr, 0x04), inputAmount)
                if iszero(call(gas(), weth, 0, ptr, 0x24, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else {
            if (msg.value != 0) revert RouterErrors.InvalidMsgValue();
            srcToken.safeTransferFrom(msg.sender, address(clipperExchange), inputAmount);
        }

        if (srcETH) {
            // clipperExchange.sellEthForToken{value: inputAmount}(address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellEthForToken.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, selector)
                mstore(add(ptr, 0x04), dstToken)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                mstore(add(ptr, 0x84), recipient)
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x143), _INCH_TAG_WITH_LENGTH_PREFIX)
                if iszero(call(gas(), clipper, inputAmount, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else if (dstToken == _ETH || dstToken == _WETH) {
            // clipperExchange.sellTokenForEth(address(srcToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellTokenForEth.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                switch iszero(dstToken)
                case 1 {
                    mstore(add(ptr, 0x84), recipient)
                }
                default {
                    mstore(add(ptr, 0x84), address())
                }
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x143), _INCH_TAG_WITH_LENGTH_PREFIX)
                if iszero(call(gas(), clipper, 0, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }

            if (dstToken == _WETH) {
                // _WETH.deposit{value: outputAmount}();
                // _WETH.transfer(recipient, outputAmount);
                address weth = address(_WETH);
                bytes4 depositSelector = _WETH.deposit.selector;
                bytes4 transferSelector = _WETH.transfer.selector;
                /// @solidity memory-safe-assembly
                assembly { // solhint-disable-line no-inline-assembly
                    let ptr := mload(0x40)

                    mstore(ptr, depositSelector)
                    if iszero(call(gas(), weth, outputAmount, ptr, 0x04, 0, 0)) {
                        returndatacopy(ptr, 0, returndatasize())
                        revert(ptr, returndatasize())
                    }

                    mstore(ptr, transferSelector)
                    mstore(add(ptr, 0x04), recipient)
                    mstore(add(ptr, 0x24), outputAmount)
                    if iszero(call(gas(), weth, 0, ptr, 0x44, 0, 0)) {
                        returndatacopy(ptr, 0, returndatasize())
                        revert(ptr, returndatasize())
                    }
                }
            }
        } else {
            // clipperExchange.swap(address(srcToken), address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.swap.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken)
                mstore(add(ptr, 0x24), dstToken)
                mstore(add(ptr, 0x44), inputAmount)
                mstore(add(ptr, 0x64), outputAmount)
                mstore(add(ptr, 0x84), goodUntil)
                mstore(add(ptr, 0xa4), recipient)
                mstore(add(ptr, 0xc4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xe4), r)
                mstore(add(ptr, 0x104), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x124), 0x140)
                mstore(add(ptr, 0x163), _INCH_TAG_WITH_LENGTH_PREFIX)
                if iszero(call(gas(), clipper, 0, ptr, 0x169, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }

        return outputAmount;
    }
}


// File contracts/interfaces/IAggregationExecutor.sol


pragma solidity 0.8.17;

/// @title Interface for making arbitrary calls during swap
interface IAggregationExecutor {
    /// @notice propagates information about original msg.sender and executes arbitrary data
    function execute(address msgSender) external payable;  // 0x4b64e492
}


// File @1inch/solidity-utils/contracts/interfaces/[email protected]


pragma solidity ^0.8.0;


interface IERC20MetadataUppercase {
    function NAME() external view returns (string memory);  // solhint-disable-line func-name-mixedcase
    function SYMBOL() external view returns (string memory);  // solhint-disable-line func-name-mixedcase
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;

/// @title Library with gas-efficient string operations
library StringUtil {
    function toHex(uint256 value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }

    function toHex(address value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }

    function toHex(bytes memory data) internal pure returns (string memory result) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            function _toHex16(input) -> output {
                output := or(
                    and(input, 0xFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000),
                    shr(64, and(input, 0x0000000000000000FFFFFFFFFFFFFFFF00000000000000000000000000000000))
                )
                output := or(
                    and(output, 0xFFFFFFFF000000000000000000000000FFFFFFFF000000000000000000000000),
                    shr(32, and(output, 0x00000000FFFFFFFF000000000000000000000000FFFFFFFF0000000000000000))
                )
                output := or(
                    and(output, 0xFFFF000000000000FFFF000000000000FFFF000000000000FFFF000000000000),
                    shr(16, and(output, 0x0000FFFF000000000000FFFF000000000000FFFF000000000000FFFF00000000))
                )
                output := or(
                    and(output, 0xFF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000),
                    shr(8, and(output, 0x00FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000))
                )
                output := or(
                    shr(4, and(output, 0xF000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000)),
                    shr(8, and(output, 0x0F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F00))
                )
                output := add(
                    add(0x3030303030303030303030303030303030303030303030303030303030303030, output),
                    mul(
                        and(
                            shr(4, add(output, 0x0606060606060606060606060606060606060606060606060606060606060606)),
                            0x0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F
                        ),
                        7   // Change 7 to 39 for lower case output
                    )
                )
            }

            result := mload(0x40)
            let length := mload(data)
            let resultLength := shl(1, length)
            let toPtr := add(result, 0x22)          // 32 bytes for length + 2 bytes for '0x'
            mstore(0x40, add(toPtr, resultLength))  // move free memory pointer
            mstore(add(result, 2), 0x3078)          // 0x3078 is right aligned so we write to `result + 2`
                                                    // to store the last 2 bytes in the beginning of the string
            mstore(result, add(resultLength, 2))    // extra 2 bytes for '0x'

            for {
                let fromPtr := add(data, 0x20)
                let endPtr := add(fromPtr, length)
            } lt(fromPtr, endPtr) {
                fromPtr := add(fromPtr, 0x20)
            } {
                let rawData := mload(fromPtr)
                let hexData := _toHex16(rawData)
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
                hexData := _toHex16(shl(128, rawData))
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;





library UniERC20 {
    using SafeERC20 for IERC20;

    error InsufficientBalance();
    error ApproveCalledOnETH();
    error NotEnoughValue();
    error FromIsNotSender();
    error ToIsNotThis();
    error ETHTransferFailed();

    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(address(0));

    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }

    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    /// @dev note that this function does nothing in case of zero amount
    function uniTransfer(IERC20 token, address payable to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (address(this).balance < amount) revert InsufficientBalance();
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = to.call{value: amount, gas: _RAW_CALL_GAS_LIMIT}("");
                if (!success) revert ETHTransferFailed();
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }

    /// @dev note that this function does nothing in case of zero amount
    function uniTransferFrom(IERC20 token, address payable from, address to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (msg.value < amount) revert NotEnoughValue();
                if (from != msg.sender) revert FromIsNotSender();
                if (to != address(this)) revert ToIsNotThis();
                if (msg.value > amount) {
                    // Return remainder if exist
                    unchecked {
                        // solhint-disable-next-line avoid-low-level-calls
                        (bool success, ) = from.call{value: msg.value - amount, gas: _RAW_CALL_GAS_LIMIT}("");
                        if (!success) revert ETHTransferFailed();
                    }
                }
            } else {
                token.safeTransferFrom(from, to, amount);
            }
        }
    }

    function uniSymbol(IERC20 token) internal view returns(string memory) {
        return _uniDecode(token, IERC20Metadata.symbol.selector, IERC20MetadataUppercase.SYMBOL.selector);
    }

    function uniName(IERC20 token) internal view returns(string memory) {
        return _uniDecode(token, IERC20Metadata.name.selector, IERC20MetadataUppercase.NAME.selector);
    }

    function uniApprove(IERC20 token, address to, uint256 amount) internal {
        if (isETH(token)) revert ApproveCalledOnETH();

        token.forceApprove(to, amount);
    }

    /// 20K gas is provided to account for possible implementations of name/symbol
    /// (token implementation might be behind proxy or store the value in storage)
    function _uniDecode(IERC20 token, bytes4 lowerCaseSelector, bytes4 upperCaseSelector) private view returns(string memory result) {
        if (isETH(token)) {
            return "ETH";
        }

        (bool success, bytes memory data) = address(token).staticcall{ gas: 20000 }(
            abi.encodeWithSelector(lowerCaseSelector)
        );
        if (!success) {
            (success, data) = address(token).staticcall{ gas: 20000 }(
                abi.encodeWithSelector(upperCaseSelector)
            );
        }

        if (success && data.length >= 0x40) {
            (uint256 offset, uint256 len) = abi.decode(data, (uint256, uint256));
            if (offset == 0x20 && len > 0 && data.length == 0x40 + len) {
                /// @solidity memory-safe-assembly
                assembly { // solhint-disable-line no-inline-assembly
                    result := add(data, 0x20)
                }
                return result;
            }
        }

        if (success && data.length == 32) {
            uint256 len = 0;
            while (len < data.length && data[len] >= 0x20 && data[len] <= 0x7E) {
                unchecked {
                    len++;
                }
            }

            if (len > 0) {
                /// @solidity memory-safe-assembly
                assembly { // solhint-disable-line no-inline-assembly
                    mstore(data, len)
                }
                return string(data);
            }
        }

        return StringUtil.toHex(address(token));
    }
}


// File contracts/routers/GenericRouter.sol


pragma solidity 0.8.17;





contract GenericRouter is EthReceiver {
    using UniERC20 for IERC20;
    using SafeERC20 for IERC20;

    error ZeroMinReturn();
    error ZeroReturnAmount();

    uint256 private constant _PARTIAL_FILL = 1 << 0;
    uint256 private constant _REQUIRES_EXTRA_ETH = 1 << 1;

    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address payable srcReceiver;
        address payable dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 flags;
    }

    /// @notice Performs a swap, delegating all calls encoded in `data` to `executor`. See tests for usage examples
    /// @dev router keeps 1 wei of every token on the contract balance for gas optimisations reasons. This affects first swap of every token by leaving 1 wei on the contract.
    /// @param executor Aggregation executor that executes calls described in `data`
    /// @param desc Swap description
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// @param data Encoded calls that `caller` should execute in between of swaps
    /// @return returnAmount Resulting token amount
    /// @return spentAmount Source token amount
    function swap(
        IAggregationExecutor executor,
        SwapDescription calldata desc,
        bytes calldata permit,
        bytes calldata data
    )
        external
        payable
        returns (
            uint256 returnAmount,
            uint256 spentAmount
        )
    {
        if (desc.minReturnAmount == 0) revert ZeroMinReturn();

        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;

        bool srcETH = srcToken.isETH();
        if (desc.flags & _REQUIRES_EXTRA_ETH != 0) {
            if (msg.value <= (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        } else {
            if (msg.value != (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        }

        if (!srcETH) {
            if (permit.length > 0) {
                srcToken.safePermit(permit);
            }
            srcToken.safeTransferFrom(msg.sender, desc.srcReceiver, desc.amount);
        }

        _execute(executor, msg.sender, desc.amount, data);

        spentAmount = desc.amount;
        // we leave 1 wei on the router for gas optimisations reasons
        returnAmount = dstToken.uniBalanceOf(address(this));
        if (returnAmount == 0) revert ZeroReturnAmount();
        unchecked { returnAmount--; }

        if (desc.flags & _PARTIAL_FILL != 0) {
            uint256 unspentAmount = srcToken.uniBalanceOf(address(this));
            if (unspentAmount > 1) {
                // we leave 1 wei on the router for gas optimisations reasons
                unchecked { unspentAmount--; }
                spentAmount -= unspentAmount;
                srcToken.uniTransfer(payable(msg.sender), unspentAmount);
            }
            if (returnAmount * desc.amount < desc.minReturnAmount * spentAmount) revert RouterErrors.ReturnAmountIsNotEnough();
        } else {
            if (returnAmount < desc.minReturnAmount) revert RouterErrors.ReturnAmountIsNotEnough();
        }

        address payable dstReceiver = (desc.dstReceiver == address(0)) ? payable(msg.sender) : desc.dstReceiver;
        dstToken.uniTransfer(dstReceiver, returnAmount);
    }

    function _execute(
        IAggregationExecutor executor,
        address srcTokenOwner,
        uint256 inputAmount,
        bytes calldata data
    ) private {
        bytes4 executeSelector = executor.execute.selector;
        /// @solidity memory-safe-assembly
        assembly {  // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, executeSelector)
            mstore(add(ptr, 0x04), srcTokenOwner)
            calldatacopy(add(ptr, 0x24), data.offset, data.length)
            mstore(add(add(ptr, 0x24), data.length), inputAmount)

            if iszero(call(gas(), executor, callvalue(), ptr, add(0x44, data.length), 0, 0)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
}


// File contracts/routers/UnoswapRouter.sol


pragma solidity 0.8.17;




contract UnoswapRouter is EthReceiver {
    using SafeERC20 for IERC20;

    error ReservesCallFailed();
    error SwapAmountTooLarge();

    bytes4 private constant _TRANSFER_FROM_CALL_SELECTOR = 0x23b872dd;
    bytes4 private constant _WETH_DEPOSIT_CALL_SELECTOR = 0xd0e30db0;
    bytes4 private constant _WETH_WITHDRAW_CALL_SELECTOR = 0x2e1a7d4d;
    bytes4 private constant _ERC20_TRANSFER_CALL_SELECTOR = 0xa9059cbb;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _REVERSE_MASK =   0x8000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_MASK =      0x4000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _NUMERATOR_MASK = 0x0000000000000000ffffffff0000000000000000000000000000000000000000;
    /// @dev WETH address is network-specific and needs to be changed before deployment.
    /// It can not be moved to immutable as immutables are not supported in assembly
    address private constant _WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    bytes4 private constant _UNISWAP_PAIR_RESERVES_CALL_SELECTOR = 0x0902f1ac;
    bytes4 private constant _UNISWAP_PAIR_SWAP_CALL_SELECTOR = 0x022c0d9f;
    uint256 private constant _DENOMINATOR = 1e9;
    uint256 private constant _NUMERATOR_OFFSET = 160;
    uint256 private constant _MAX_SWAP_AMOUNT = (1 << 112) - 1;  // type(uint112).max;

    /// @notice Same as `unoswapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swapped funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function unoswapToWithPermit(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        srcToken.safePermit(permit);
        return _unoswap(recipient, srcToken, amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swapped funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function unoswapTo(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _unoswap(recipient, srcToken, amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function unoswap(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _unoswap(payable(msg.sender), srcToken, amount, minReturn, pools);
    }

    function _unoswap(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) private returns(uint256 returnAmount) {
        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function validateERC20Transfer(status) {
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()),                       // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1))  // true in return data
                )
                if iszero(success) {
                    mstore(0, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // ERC20TransferFailed()
                    revert(0, 4)
                }
            }

            function swap(emptyPtr, swapAmount, pair, reversed, numerator, to) -> ret {
                mstore(emptyPtr, _UNISWAP_PAIR_RESERVES_CALL_SELECTOR)
                if iszero(staticcall(gas(), pair, emptyPtr, 0x4, emptyPtr, 0x40)) {
                    reRevert()
                }
                if iszero(eq(returndatasize(), 0x60)) {
                    mstore(0, 0x85cd58dc00000000000000000000000000000000000000000000000000000000)  // ReservesCallFailed()
                    revert(0, 4)
                }

                let reserve0 := mload(emptyPtr)
                let reserve1 := mload(add(emptyPtr, 0x20))
                if reversed {
                    let tmp := reserve0
                    reserve0 := reserve1
                    reserve1 := tmp
                }
                // this will not overflow as reserve0, reserve1 and ret fit to 112 bit and numerator and _DENOMINATOR fit to 32 bit
                ret := mul(swapAmount, numerator)
                ret := div(mul(ret, reserve1), add(ret, mul(reserve0, _DENOMINATOR)))

                mstore(emptyPtr, _UNISWAP_PAIR_SWAP_CALL_SELECTOR)
                reversed := iszero(reversed)
                mstore(add(emptyPtr, 0x04), mul(ret, iszero(reversed)))
                mstore(add(emptyPtr, 0x24), mul(ret, reversed))
                mstore(add(emptyPtr, 0x44), to)
                mstore(add(emptyPtr, 0x64), 0x80)
                mstore(add(emptyPtr, 0x84), 0)
                if iszero(call(gas(), pair, 0, emptyPtr, 0xa4, 0, 0)) {
                    reRevert()
                }
            }

            // make sure that input amount fits in 112 bit
            if gt(amount, _MAX_SWAP_AMOUNT) {
                mstore(0, 0xcf0b4d3a00000000000000000000000000000000000000000000000000000000)  // SwapAmountTooLarge()
                revert(0, 4)
            }

            let emptyPtr := mload(0x40)
            mstore(0x40, add(emptyPtr, 0xc0))

            let poolsEndOffset := add(pools.offset, shl(5, pools.length))
            let rawPair := calldataload(pools.offset)
            switch srcToken
            case 0 {
                if iszero(eq(amount, callvalue())) {
                    mstore(0, 0x1841b4e100000000000000000000000000000000000000000000000000000000)  // InvalidMsgValue()
                    revert(0, 4)
                }

                mstore(emptyPtr, _WETH_DEPOSIT_CALL_SELECTOR)
                if iszero(call(gas(), _WETH, amount, emptyPtr, 0x4, 0, 0)) {
                    reRevert()
                }

                mstore(emptyPtr, _ERC20_TRANSFER_CALL_SELECTOR)
                mstore(add(emptyPtr, 0x4), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x24), amount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x44, 0, 0)) {
                    reRevert()
                }
            }
            default {
                if callvalue() {
                    mstore(0, 0x1841b4e100000000000000000000000000000000000000000000000000000000)  // InvalidMsgValue()
                    revert(0, 4)
                }

                mstore(emptyPtr, _TRANSFER_FROM_CALL_SELECTOR)
                mstore(add(emptyPtr, 0x4), caller())
                mstore(add(emptyPtr, 0x24), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x44), amount)
                validateERC20Transfer(
                    call(gas(), srcToken, 0, emptyPtr, 0x64, 0, 0x20)
                )
            }

            returnAmount := amount

            for {let i := add(pools.offset, 0x20)} lt(i, poolsEndOffset) {i := add(i, 0x20)} {
                let nextRawPair := calldataload(i)

                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    and(nextRawPair, _ADDRESS_MASK)
                )

                rawPair := nextRawPair
            }

            switch and(rawPair, _WETH_MASK)
            case 0 {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    recipient
                )
            }
            default {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    address()
                )

                mstore(emptyPtr, _WETH_WITHDRAW_CALL_SELECTOR)
                mstore(add(emptyPtr, 0x04), returnAmount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x24, 0, 0)) {
                    reRevert()
                }

                if iszero(call(gas(), recipient, returnAmount, 0, 0, 0, 0)) {
                    reRevert()
                }
            }
        }
        if (returnAmount < minReturn) revert RouterErrors.ReturnAmountIsNotEnough();
    }
}


// File contracts/interfaces/IUniswapV3Pool.sol

pragma solidity 0.8.17;

interface IUniswapV3Pool {
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}


// File contracts/interfaces/IUniswapV3SwapCallback.sol

pragma solidity 0.8.17;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248) {
        require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
        return int248(value);
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240) {
        require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
        return int240(value);
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232) {
        require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
        return int232(value);
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224) {
        require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
        return int224(value);
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216) {
        require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
        return int216(value);
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208) {
        require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
        return int208(value);
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200) {
        require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
        return int200(value);
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192) {
        require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
        return int192(value);
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184) {
        require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
        return int184(value);
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176) {
        require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
        return int176(value);
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168) {
        require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
        return int168(value);
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160) {
        require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
        return int160(value);
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152) {
        require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
        return int152(value);
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144) {
        require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
        return int144(value);
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136) {
        require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
        return int136(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120) {
        require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
        return int120(value);
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112) {
        require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
        return int112(value);
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104) {
        require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
        return int104(value);
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96) {
        require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
        return int96(value);
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88) {
        require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
        return int88(value);
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80) {
        require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
        return int80(value);
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72) {
        require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
        return int72(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56) {
        require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
        return int56(value);
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48) {
        require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
        return int48(value);
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40) {
        require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
        return int40(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24) {
        require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
        return int24(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}


// File contracts/routers/UnoswapV3Router.sol


pragma solidity 0.8.17;









contract UnoswapV3Router is EthReceiver, IUniswapV3SwapCallback {
    using Address for address payable;
    using SafeERC20 for IERC20;

    error EmptyPools();
    error BadPool();

    uint256 private constant _ONE_FOR_ZERO_MASK = 1 << 255;
    uint256 private constant _WETH_UNWRAP_MASK = 1 << 253;
    bytes32 private constant _POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
    bytes32 private constant _FF_FACTORY = 0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000;
    // concatenation of token0(), token1() fee(), transfer() and transferFrom() selectors
    bytes32 private constant _SELECTORS = 0x0dfe1681d21220a7ddca3f43a9059cbb23b872dd000000000000000000000000;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 private constant _MIN_SQRT_RATIO = 4295128739 + 1;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 private constant _MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342 - 1;
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(IWETH weth) {
        _WETH = weth;
    }

    /// @notice Same as `uniswapV3SwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function uniswapV3SwapToWithPermit(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        srcToken.safePermit(permit);
        return _uniswapV3Swap(recipient, amount, minReturn, pools);
    }

    /// @notice Same as `uniswapV3SwapTo` but uses `msg.sender` as recipient
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3Swap(
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _uniswapV3Swap(payable(msg.sender), amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap V3 exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3SwapTo(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _uniswapV3Swap(recipient, amount, minReturn, pools);
    }

    function _uniswapV3Swap(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) private returns(uint256 returnAmount) {
        unchecked {
            uint256 len = pools.length;
            if (len == 0) revert EmptyPools();
            uint256 lastIndex = len - 1;
            returnAmount = amount;
            bool wrapWeth = msg.value > 0;
            bool unwrapWeth = pools[lastIndex] & _WETH_UNWRAP_MASK > 0;
            if (wrapWeth) {
                if (msg.value != amount) revert RouterErrors.InvalidMsgValue();
                _WETH.deposit{value: amount}();
            }
            if (len > 1) {
                returnAmount = _makeSwap(address(this), wrapWeth ? address(this) : msg.sender, pools[0], returnAmount);

                for (uint256 i = 1; i < lastIndex; i++) {
                    returnAmount = _makeSwap(address(this), address(this), pools[i], returnAmount);
                }
                returnAmount = _makeSwap(unwrapWeth ? address(this) : recipient, address(this), pools[lastIndex], returnAmount);
            } else {
                returnAmount = _makeSwap(unwrapWeth ? address(this) : recipient, wrapWeth ? address(this) : msg.sender, pools[0], returnAmount);
            }

            if (returnAmount < minReturn) revert RouterErrors.ReturnAmountIsNotEnough();

            if (unwrapWeth) {
                _WETH.withdraw(returnAmount);
                recipient.sendValue(returnAmount);
            }
        }
    }

    /// @inheritdoc IUniswapV3SwapCallback
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata /* data */
    ) external override {
        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function validateERC20Transfer(status) {
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()),                       // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1))  // true in return data
                )
                if iszero(success) {
                    mstore(0, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // ERC20TransferFailed()
                    revert(0, 4)
                }
            }

            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 0x15)  // 0x15 = _FF_FACTORY size

            mstore(emptyPtr, _SELECTORS)
            if iszero(staticcall(gas(), caller(), emptyPtr, 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x4), 0x4, add(resultPtr, 0x20), 0x20)) {
                reRevert()
            }
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x8), 0x4, add(resultPtr, 0x40), 0x20)) {
                reRevert()
            }

            let token
            let amount
            switch sgt(amount0Delta, 0)
            case 1 {
                token := mload(resultPtr)
                amount := amount0Delta
            }
            default {
                token := mload(add(resultPtr, 0x20))
                amount := amount1Delta
            }

            mstore(emptyPtr, _FF_FACTORY)
            mstore(resultPtr, keccak256(resultPtr, 0x60)) // Compute the inner hash in-place
            mstore(add(resultPtr, 0x20), _POOL_INIT_CODE_HASH)
            let pool := and(keccak256(emptyPtr, 0x55), _ADDRESS_MASK)
            if xor(pool, caller()) {
                mstore(0, 0xb2c0272200000000000000000000000000000000000000000000000000000000)  // BadPool()
                revert(0, 4)
            }

            let payer := calldataload(0x84)
            mstore(emptyPtr, _SELECTORS)
            switch eq(payer, address())
            case 1 {
                // token.safeTransfer(msg.sender,amount)
                mstore(add(emptyPtr, 0x10), caller())
                mstore(add(emptyPtr, 0x30), amount)
                validateERC20Transfer(
                    call(gas(), token, 0, add(emptyPtr, 0x0c), 0x44, 0, 0x20)
                )
            }
            default {
                // token.safeTransferFrom(payer, msg.sender, amount);
                mstore(add(emptyPtr, 0x14), payer)
                mstore(add(emptyPtr, 0x34), caller())
                mstore(add(emptyPtr, 0x54), amount)
                validateERC20Transfer(
                    call(gas(), token, 0, add(emptyPtr, 0x10), 0x64, 0, 0x20)
                )
            }
        }
    }

    function _makeSwap(address recipient, address payer, uint256 pool, uint256 amount) private returns (uint256) {
        bool zeroForOne = pool & _ONE_FOR_ZERO_MASK == 0;
        if (zeroForOne) {
            (, int256 amount1) = IUniswapV3Pool(address(uint160(pool))).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MIN_SQRT_RATIO,
                abi.encode(payer)
            );
            return SafeCast.toUint256(-amount1);
        } else {
            (int256 amount0,) = IUniswapV3Pool(address(uint160(pool))).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MAX_SQRT_RATIO,
                abi.encode(payer)
            );
            return SafeCast.toUint256(-amount0);
        }
    }
}


// File @1inch/solidity-utils/contracts/[email protected]


pragma solidity ^0.8.0;

abstract contract OnlyWethReceiver is EthReceiver {
    address private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(address weth) {
        _WETH = address(weth);
    }

    function _receive() internal virtual override {
        if (msg.sender != _WETH) revert EthDepositRejected();
    }
}


// File @openzeppelin/contracts/interfaces/[email protected]

// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1271.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 *
 * _Available since v4.1._
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;

library ECDSA {
    // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
    // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
    // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
    // signatures from current libraries generate a unique signature with an s-value in the lower half order.
    //
    // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
    // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
    // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
    // these malleable signatures as well.
    uint256 private constant _S_BOUNDARY = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0 + 1;
    uint256 private constant _COMPACT_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _COMPACT_V_SHIFT = 255;

    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal view returns(address signer) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)

                mstore(ptr, hash)
                mstore(add(ptr, 0x20), v)
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }

    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal view returns(address signer) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let s := and(vs, _COMPACT_S_MASK)
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)

                mstore(ptr, hash)
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }

    /// WARNING!!!
    /// There is a known signature malleability issue with two representations of signatures!
    /// Even though this function is able to verify both standard 65-byte and compact 64-byte EIP-2098 signatures
    /// one should never use raw signatures for any kind of invalidation logic in their code.
    /// As the standard and compact representations are interchangeable any invalidation logic that relies on
    /// signature uniqueness will get rekt.
    /// More info: https://github.com/OpenZeppelin/openzeppelin-contracts/security/advisories/GHSA-4h98-2769-gh6h
    function recover(bytes32 hash, bytes calldata signature) internal view returns(address signer) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            // memory[ptr:ptr+0x80] = (hash, v, r, s)
            switch signature.length
            case 65 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                mstore(add(ptr, 0x20), byte(0, calldataload(add(signature.offset, 0x40))))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x40)
            }
            case 64 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                let vs := calldataload(add(signature.offset, 0x20))
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x20)
                mstore(add(ptr, 0x60), and(vs, _COMPACT_S_MASK))
            }
            default {
                ptr := 0
            }

            if ptr {
                if lt(mload(add(ptr, 0x60)), _S_BOUNDARY) {
                    // memory[ptr:ptr+0x20] = (hash)
                    mstore(ptr, hash)

                    mstore(0, 0)
                    pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                    signer := mload(0)
                }
            }
        }
    }

    function recoverOrIsValidSignature(address signer, bytes32 hash, bytes calldata signature) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if ((signature.length == 64 || signature.length == 65) && recover(hash, signature) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, signature);
    }

    function recoverOrIsValidSignature(address signer, bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, v, r, s) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, v, r, s);
    }

    function recoverOrIsValidSignature(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, r, vs);
    }

    function recoverOrIsValidSignature65(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature65(signer, hash, r, vs);
    }

    function isValidSignature(address signer, bytes32 hash, bytes calldata signature) internal view returns(bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, signature));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), signature.length)
            calldatacopy(add(ptr, 0x64), signature.offset, signature.length)
            if staticcall(gas(), signer, ptr, add(0x64, signature.length), 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function isValidSignature(address signer, bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal view returns(bool success) {
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), s)
            mstore8(add(ptr, 0xa4), v)
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function isValidSignature(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs)));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 64)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), vs)
            if staticcall(gas(), signer, ptr, 0xa4, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function isValidSignature65(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs & ~uint256(1 << 255), uint8(vs >> 255))));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), and(vs, _COMPACT_S_MASK))
            mstore8(add(ptr, 0xa4), add(27, shr(_COMPACT_V_SHIFT, vs)))
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 res) {
        // 32 is the length in bytes of hash, enforced by the type signature above
        // return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            mstore(0, 0x19457468657265756d205369676e6564204d6573736167653a0a333200000000) // "\x19Ethereum Signed Message:\n32"
            mstore(28, hash)
            res := keccak256(0, 60)
        }
    }

    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 res) {
        // return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, 0x1901000000000000000000000000000000000000000000000000000000000000) // "\x19\x01"
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            res := keccak256(ptr, 66)
        }
    }
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;

library OrderRFQLib {
    struct OrderRFQ {
        uint256 info;  // lowest 64 bits is the order id, next 64 bits is the expiration timestamp
        address makerAsset;
        address takerAsset;
        address maker;
        address allowedSender;  // equals to Zero address on public orders
        uint256 makingAmount;
        uint256 takingAmount;
    }

    bytes32 constant internal _LIMIT_ORDER_RFQ_TYPEHASH = keccak256(
        "OrderRFQ("
            "uint256 info,"
            "address makerAsset,"
            "address takerAsset,"
            "address maker,"
            "address allowedSender,"
            "uint256 makingAmount,"
            "uint256 takingAmount"
        ")"
    );

    function hash(OrderRFQ memory order, bytes32 domainSeparator) internal pure returns(bytes32 result) {
        bytes32 typehash = _LIMIT_ORDER_RFQ_TYPEHASH;
        bytes32 orderHash;
        // this assembly is memory unsafe :(
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := sub(order, 0x20)

            // keccak256(abi.encode(_LIMIT_ORDER_RFQ_TYPEHASH, order));
            let tmp := mload(ptr)
            mstore(ptr, typehash)
            orderHash := keccak256(ptr, 0x100)
            mstore(ptr, tmp)
        }
        return ECDSA.toTypedDataHash(domainSeparator, orderHash);
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}


// File @openzeppelin/contracts/utils/cryptography/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)

pragma solidity ^0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}


// File @1inch/limit-order-protocol/contracts/libraries/[email protected]


pragma solidity 0.8.17;

library Errors {
    error InvalidMsgValue();
    error ETHTransferFailed();
}


// File @1inch/limit-order-protocol/contracts/helpers/[email protected]


pragma solidity 0.8.17;

/// @title A helper contract for calculations related to order amounts
library AmountCalculator {
    /// @notice Calculates maker amount
    /// @return Result Floored maker amount
    function getMakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapTakerAmount) internal pure returns(uint256) {
        return swapTakerAmount * orderMakerAmount / orderTakerAmount;
    }

    /// @notice Calculates taker amount
    /// @return Result Ceiled taker amount
    function getTakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapMakerAmount) internal pure returns(uint256) {
        return (swapMakerAmount * orderTakerAmount + orderMakerAmount - 1) / orderMakerAmount;
    }
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;







/// @title RFQ Limit Order mixin
abstract contract OrderRFQMixin is EIP712, OnlyWethReceiver {
    using SafeERC20 for IERC20;
    using OrderRFQLib for OrderRFQLib.OrderRFQ;

    error RFQZeroTargetIsForbidden();
    error RFQPrivateOrder();
    error RFQBadSignature();
    error OrderExpired();
    error MakingAmountExceeded();
    error TakingAmountExceeded();
    error RFQSwapWithZeroAmount();
    error InvalidatedOrder();

    /**
     * @notice Emitted when RFQ gets filled
     * @param orderHash Hash of the order
     * @param makingAmount Amount of the maker asset that was transferred from maker to taker
     */
    event OrderFilledRFQ(
        bytes32 orderHash,
        uint256 makingAmount
    );

    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    uint256 private constant _MAKER_AMOUNT_FLAG = 1 << 255;
    uint256 private constant _SIGNER_SMART_CONTRACT_HINT = 1 << 254;
    uint256 private constant _IS_VALID_SIGNATURE_65_BYTES = 1 << 253;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 252;
    uint256 private constant _AMOUNT_MASK = ~(
        _MAKER_AMOUNT_FLAG |
        _SIGNER_SMART_CONTRACT_HINT |
        _IS_VALID_SIGNATURE_65_BYTES |
        _UNWRAP_WETH_FLAG
    );

    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    mapping(address => mapping(uint256 => uint256)) private _invalidator;

    constructor(IWETH weth) OnlyWethReceiver(address(weth)) {
        _WETH = weth;
    }

    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param maker Maker address
     * @param slot Slot number to return bitmask for
     * @return result Each bit represents whether corresponding was already invalidated
     */
    function invalidatorForOrderRFQ(address maker, uint256 slot) external view returns(uint256 /* result */) {
        return _invalidator[maker][slot];
    }

    /**
     * @notice Cancels order's quote
     * @param orderInfo Order info (only order id in lowest 64 bits is used)
     */
    function cancelOrderRFQ(uint256 orderInfo) external {
        _invalidateOrder(msg.sender, orderInfo, 0);
    }

    /// @notice Cancels multiple order's quotes
    function cancelOrderRFQ(uint256 orderInfo, uint256 additionalMask) external {
        _invalidateOrder(msg.sender, orderInfo, additionalMask);
    }

    /**
     * @notice Fills order's quote, fully or partially (whichever is possible)
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderRFQ(
        OrderRFQLib.OrderRFQ memory order,
        bytes calldata signature,
        uint256 flagsAndAmount
    ) external payable returns(uint256 /* filledMakingAmount */, uint256 /* filledTakingAmount */, bytes32 /* orderHash */) {
        return fillOrderRFQTo(order, signature, flagsAndAmount, msg.sender);
    }

    /**
     * @notice Fills order's quote, fully or partially, with compact signature
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * - Bits 0-252 contain the amount to fill
     * - Bit 253 is used to indicate whether signature is 64-bit (0) or 65-bit (1)
     * - Bit 254 is used to indicate whether smart contract (1) signed the order or not (0)
     * - Bit 255 is used to indicate whether maker (1) or taker amount (0) is given in the amount parameter
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderRFQCompact(
        OrderRFQLib.OrderRFQ memory order,
        bytes32 r,
        bytes32 vs,
        uint256 flagsAndAmount
    ) external payable returns(uint256 filledMakingAmount, uint256 filledTakingAmount, bytes32 orderHash) {
        orderHash = order.hash(_domainSeparatorV4());
        if (flagsAndAmount & _SIGNER_SMART_CONTRACT_HINT != 0) {
            if (flagsAndAmount & _IS_VALID_SIGNATURE_65_BYTES != 0) {
                if (!ECDSA.isValidSignature65(order.maker, orderHash, r, vs)) revert RFQBadSignature();
            } else {
                if (!ECDSA.isValidSignature(order.maker, orderHash, r, vs)) revert RFQBadSignature();
            }
        } else {
            if(!ECDSA.recoverOrIsValidSignature(order.maker, orderHash, r, vs)) revert RFQBadSignature();
        }

        (filledMakingAmount, filledTakingAmount) = _fillOrderRFQTo(order, flagsAndAmount, msg.sender);
        emit OrderFilledRFQ(orderHash, filledMakingAmount);
    }

    /**
     * @notice Same as `fillOrderRFQTo` but calls permit first.
     * It allows to approve token spending and make a swap in one transaction.
     * Also allows to specify funds destination instead of `msg.sender`
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * @param target Address that will receive swap funds
     * @param permit Should consist of abiencoded token address and encoded `IERC20Permit.permit` call.
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillOrderRFQToWithPermit(
        OrderRFQLib.OrderRFQ memory order,
        bytes calldata signature,
        uint256 flagsAndAmount,
        address target,
        bytes calldata permit
    ) external returns(uint256 /* filledMakingAmount */, uint256 /* filledTakingAmount */, bytes32 /* orderHash */) {
        IERC20(order.takerAsset).safePermit(permit);
        return fillOrderRFQTo(order, signature, flagsAndAmount, target);
    }

    /**
     * @notice Same as `fillOrderRFQ` but allows to specify funds destination instead of `msg.sender`
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * @param target Address that will receive swap funds
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderRFQTo(
        OrderRFQLib.OrderRFQ memory order,
        bytes calldata signature,
        uint256 flagsAndAmount,
        address target
    ) public payable returns(uint256 filledMakingAmount, uint256 filledTakingAmount, bytes32 orderHash) {
        orderHash = order.hash(_domainSeparatorV4());
        if (flagsAndAmount & _SIGNER_SMART_CONTRACT_HINT != 0) {
            if (flagsAndAmount & _IS_VALID_SIGNATURE_65_BYTES != 0 && signature.length != 65) revert RFQBadSignature();
            if (!ECDSA.isValidSignature(order.maker, orderHash, signature)) revert RFQBadSignature();
        } else {
            if(!ECDSA.recoverOrIsValidSignature(order.maker, orderHash, signature)) revert RFQBadSignature();
        }
        (filledMakingAmount, filledTakingAmount) = _fillOrderRFQTo(order, flagsAndAmount, target);
        emit OrderFilledRFQ(orderHash, filledMakingAmount);
    }

    function _fillOrderRFQTo(
        OrderRFQLib.OrderRFQ memory order,
        uint256 flagsAndAmount,
        address target
    ) private returns(uint256 makingAmount, uint256 takingAmount) {
        if (target == address(0)) revert RFQZeroTargetIsForbidden();

        address maker = order.maker;

        // Validate order
        if (order.allowedSender != address(0) && order.allowedSender != msg.sender) revert RFQPrivateOrder();

        {  // Stack too deep
            uint256 info = order.info;
            // Check time expiration
            uint256 expiration = uint128(info) >> 64;
            if (expiration != 0 && block.timestamp > expiration) revert OrderExpired(); // solhint-disable-line not-rely-on-time
            _invalidateOrder(maker, info, 0);
        }

        {  // Stack too deep
            uint256 orderMakingAmount = order.makingAmount;
            uint256 orderTakingAmount = order.takingAmount;
            uint256 amount = flagsAndAmount & _AMOUNT_MASK;
            // Compute partial fill if needed
            if (amount == 0) {
                // zero amount means whole order
                makingAmount = orderMakingAmount;
                takingAmount = orderTakingAmount;
            }
            else if (flagsAndAmount & _MAKER_AMOUNT_FLAG != 0) {
                if (amount > orderMakingAmount) revert MakingAmountExceeded();
                makingAmount = amount;
                takingAmount = AmountCalculator.getTakingAmount(orderMakingAmount, orderTakingAmount, makingAmount);
            }
            else {
                if (amount > orderTakingAmount) revert TakingAmountExceeded();
                takingAmount = amount;
                makingAmount = AmountCalculator.getMakingAmount(orderMakingAmount, orderTakingAmount, takingAmount);
            }
        }

        if (makingAmount == 0 || takingAmount == 0) revert RFQSwapWithZeroAmount();

        // Maker => Taker
        if (order.makerAsset == address(_WETH) && flagsAndAmount & _UNWRAP_WETH_FLAG != 0) {
            _WETH.transferFrom(maker, address(this), makingAmount);
            _WETH.withdraw(makingAmount);
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, ) = target.call{value: makingAmount, gas: _RAW_CALL_GAS_LIMIT}("");
            if (!success) revert Errors.ETHTransferFailed();
        } else {
            IERC20(order.makerAsset).safeTransferFrom(maker, target, makingAmount);
        }

        // Taker => Maker
        if (order.takerAsset == address(_WETH) && msg.value > 0) {
            if (msg.value != takingAmount) revert Errors.InvalidMsgValue();
            _WETH.deposit{ value: takingAmount }();
            _WETH.transfer(maker, takingAmount);
        } else {
            if (msg.value != 0) revert Errors.InvalidMsgValue();
            IERC20(order.takerAsset).safeTransferFrom(msg.sender, maker, takingAmount);
        }
    }

    function _invalidateOrder(address maker, uint256 orderInfo, uint256 additionalMask) private {
        uint256 invalidatorSlot = uint64(orderInfo) >> 8;
        uint256 invalidatorBits = (1 << uint8(orderInfo)) | additionalMask;
        mapping(uint256 => uint256) storage invalidatorStorage = _invalidator[maker];
        uint256 invalidator = invalidatorStorage[invalidatorSlot];
        if (invalidator & invalidatorBits == invalidatorBits) revert InvalidatedOrder();
        invalidatorStorage[invalidatorSlot] = invalidator | invalidatorBits;
    }
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;

library OrderLib {
    struct Order {
        uint256 salt;
        address makerAsset;
        address takerAsset;
        address maker;
        address receiver;
        address allowedSender;  // equals to Zero address on public orders
        uint256 makingAmount;
        uint256 takingAmount;
        uint256 offsets;
        // bytes makerAssetData;
        // bytes takerAssetData;
        // bytes getMakingAmount; // this.staticcall(abi.encodePacked(bytes, swapTakerAmount)) => (swapMakerAmount)
        // bytes getTakingAmount; // this.staticcall(abi.encodePacked(bytes, swapMakerAmount)) => (swapTakerAmount)
        // bytes predicate;       // this.staticcall(bytes) => (bool)
        // bytes permit;          // On first fill: permit.1.call(abi.encodePacked(permit.selector, permit.2))
        // bytes preInteraction;
        // bytes postInteraction;
        bytes interactions; // concat(makerAssetData, takerAssetData, getMakingAmount, getTakingAmount, predicate, permit, preIntercation, postInteraction)
    }

    bytes32 constant internal _LIMIT_ORDER_TYPEHASH = keccak256(
        "Order("
            "uint256 salt,"
            "address makerAsset,"
            "address takerAsset,"
            "address maker,"
            "address receiver,"
            "address allowedSender,"
            "uint256 makingAmount,"
            "uint256 takingAmount,"
            "uint256 offsets,"
            "bytes interactions"
        ")"
    );

    enum DynamicField {
        MakerAssetData,
        TakerAssetData,
        GetMakingAmount,
        GetTakingAmount,
        Predicate,
        Permit,
        PreInteraction,
        PostInteraction
    }

    function getterIsFrozen(bytes calldata getter) internal pure returns(bool) {
        return getter.length == 1 && getter[0] == "x";
    }

    function _get(Order calldata order, DynamicField field) private pure returns(bytes calldata) {
        uint256 bitShift = uint256(field) << 5; // field * 32
        return order.interactions[
            uint32((order.offsets << 32) >> bitShift):
            uint32(order.offsets >> bitShift)
        ];
    }

    function makerAssetData(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.MakerAssetData);
    }

    function takerAssetData(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.TakerAssetData);
    }

    function getMakingAmount(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.GetMakingAmount);
    }

    function getTakingAmount(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.GetTakingAmount);
    }

    function predicate(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.Predicate);
    }

    function permit(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.Permit);
    }

    function preInteraction(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.PreInteraction);
    }

    function postInteraction(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.PostInteraction);
    }

    function hash(Order calldata order, bytes32 domainSeparator) internal pure returns(bytes32 result) {
        bytes calldata interactions = order.interactions;
        bytes32 typehash = _LIMIT_ORDER_TYPEHASH;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            // keccak256(abi.encode(_LIMIT_ORDER_TYPEHASH, orderWithoutInteractions, keccak256(order.interactions)));
            calldatacopy(ptr, interactions.offset, interactions.length)
            mstore(add(ptr, 0x140), keccak256(ptr, interactions.length))
            calldatacopy(add(ptr, 0x20), order, 0x120)
            mstore(ptr, typehash)
            result := keccak256(ptr, 0x160)
        }
        result = ECDSA.toTypedDataHash(domainSeparator, result);
    }
}


// File @1inch/limit-order-protocol/contracts/libraries/[email protected]


pragma solidity 0.8.17;

/// @title Library with gas efficient alternatives to `abi.decode`
library ArgumentsDecoder {
    error IncorrectDataLength();

    function decodeUint256(bytes calldata data, uint256 offset) internal pure returns(uint256 value) {
        unchecked { if (data.length < offset + 32) revert IncorrectDataLength(); }
        // no memory ops inside so this insertion is automatically memory safe
        assembly { // solhint-disable-line no-inline-assembly
            value := calldataload(add(data.offset, offset))
        }
    }

    function decodeSelector(bytes calldata data) internal pure returns(bytes4 value) {
        if (data.length < 4) revert IncorrectDataLength();
        // no memory ops inside so this insertion is automatically memory safe
        assembly { // solhint-disable-line no-inline-assembly
            value := calldataload(data.offset)
        }
    }

    function decodeTailCalldata(bytes calldata data, uint256 tailOffset) internal pure returns(bytes calldata args) {
        if (data.length < tailOffset) revert IncorrectDataLength();
        // no memory ops inside so this insertion is automatically memory safe
        assembly {  // solhint-disable-line no-inline-assembly
            args.offset := add(data.offset, tailOffset)
            args.length := sub(data.length, tailOffset)
        }
    }

    function decodeTargetAndCalldata(bytes calldata data) internal pure returns(address target, bytes calldata args) {
        if (data.length < 20) revert IncorrectDataLength();
        // no memory ops inside so this insertion is automatically memory safe
        assembly {  // solhint-disable-line no-inline-assembly
            target := shr(96, calldataload(data.offset))
            args.offset := add(data.offset, 20)
            args.length := sub(data.length, 20)
        }
    }
}


// File @1inch/limit-order-protocol/contracts/helpers/[email protected]


pragma solidity 0.8.17;

/// @title A helper contract for managing nonce of tx sender
contract NonceManager {
    error AdvanceNonceFailed();
    event NonceIncreased(address indexed maker, uint256 newNonce);

    mapping(address => uint256) public nonce;

    /// @notice Advances nonce by one
    function increaseNonce() external {
        advanceNonce(1);
    }

    /// @notice Advances nonce by specified amount
    function advanceNonce(uint8 amount) public {
        if (amount == 0) revert AdvanceNonceFailed();
        uint256 newNonce = nonce[msg.sender] + amount;
        nonce[msg.sender] = newNonce;
        emit NonceIncreased(msg.sender, newNonce);
    }

    /// @notice Checks if `makerAddress` has specified `makerNonce`
    /// @return Result True if `makerAddress` has specified nonce. Otherwise, false
    function nonceEquals(address makerAddress, uint256 makerNonce) public view returns(bool) {
        return nonce[makerAddress] == makerNonce;
    }
}


// File @1inch/limit-order-protocol/contracts/helpers/[email protected]


pragma solidity 0.8.17;


/// @title A helper contract for executing boolean functions on arbitrary target call results
contract PredicateHelper is NonceManager {
    using ArgumentsDecoder for bytes;

    error ArbitraryStaticCallFailed();

    /// @notice Calls every target with corresponding data
    /// @return Result True if call to any target returned True. Otherwise, false
    function or(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 current;
        uint256 previous;
        for (uint256 i = 0; (current = uint32(offsets >> i)) != 0; i += 32) {
            (bool success, uint256 res) = _selfStaticCall(data[previous:current]);
            if (success && res == 1) {
                return true;
            }
            previous = current;
        }
        return false;
    }

    /// @notice Calls every target with corresponding data
    /// @return Result True if calls to all targets returned True. Otherwise, false
    function and(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 current;
        uint256 previous;
        for (uint256 i = 0; (current = uint32(offsets >> i)) != 0; i += 32) {
            (bool success, uint256 res) = _selfStaticCall(data[previous:current]);
            if (!success || res != 1) {
                return false;
            }
            previous = current;
        }
        return true;
    }

    /// @notice Calls target with specified data and tests if it's equal to the value
    /// @param value Value to test
    /// @return Result True if call to target returns the same value as `value`. Otherwise, false
    function eq(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(data);
        return success && res == value;
    }

    /// @notice Calls target with specified data and tests if it's lower than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is lower than `value`. Otherwise, false
    function lt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(data);
        return success && res < value;
    }

    /// @notice Calls target with specified data and tests if it's bigger than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is bigger than `value`. Otherwise, false
    function gt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(data);
        return success && res > value;
    }

    /// @notice Checks passed time against block timestamp
    /// @return Result True if current block timestamp is lower than `time`. Otherwise, false
    function timestampBelow(uint256 time) public view returns(bool) {
        return block.timestamp < time;  // solhint-disable-line not-rely-on-time
    }

    /// @notice Performs an arbitrary call to target with data
    /// @return Result Bytes transmuted to uint256
    function arbitraryStaticCall(address target, bytes calldata data) public view returns(uint256) {
        (bool success, uint256 res) = _staticcallForUint(target, data);
        if (!success) revert ArbitraryStaticCallFailed();
        return res;
    }

    function timestampBelowAndNonceEquals(uint256 timeNonceAccount) public view returns(bool) {
        uint256 _time = uint48(timeNonceAccount >> 208);
        uint256 _nonce = uint48(timeNonceAccount >> 160);
        address _account = address(uint160(timeNonceAccount));
        return timestampBelow(_time) && nonceEquals(_account, _nonce);
    }

    function _selfStaticCall(bytes calldata data) internal view returns(bool, uint256) {
        uint256 selector = uint32(data.decodeSelector());
        uint256 arg = data.decodeUint256(4);

        // special case for the most often used predicate
        if (selector == uint32(this.timestampBelowAndNonceEquals.selector)) {  // 0x2cc2878d
            return (true, timestampBelowAndNonceEquals(arg) ? 1 : 0);
        }

        if (selector < uint32(this.arbitraryStaticCall.selector)) {  // 0xbf15fcd8
            if (selector < uint32(this.eq.selector)) {  // 0x6fe7b0ba
                if (selector == uint32(this.gt.selector)) {  // 0x4f38e2b8
                    return (true, gt(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                } else if (selector == uint32(this.timestampBelow.selector)) {  // 0x63592c2b
                    return (true, timestampBelow(arg) ? 1 : 0);
                }
            } else {
                if (selector == uint32(this.eq.selector)) {  // 0x6fe7b0ba
                    return (true, eq(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                } else if (selector == uint32(this.or.selector)) {  // 0x74261145
                    return (true, or(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                }
            }
        } else {
            if (selector < uint32(this.lt.selector)) {  // 0xca4ece22
                if (selector == uint32(this.arbitraryStaticCall.selector)) {  // 0xbf15fcd8
                    return (true, arbitraryStaticCall(address(uint160(arg)), data.decodeTailCalldata(100)));
                } else if (selector == uint32(this.and.selector)) {  // 0xbfa75143
                    return (true, and(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                }
            } else {
                if (selector == uint32(this.lt.selector)) {  // 0xca4ece22
                    return (true, lt(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                } else if (selector == uint32(this.nonceEquals.selector)) {  // 0xcf6fc6e3
                    return (true, nonceEquals(address(uint160(arg)), data.decodeUint256(0x24)) ? 1 : 0);
                }
            }
        }

        return _staticcallForUint(address(this), data);
    }

    function _staticcallForUint(address target, bytes calldata input) private view returns(bool success, uint256 res) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            calldatacopy(data, input.offset, input.length)
            success := staticcall(gas(), target, data, input.length, 0x0, 0x20)
            success := and(success, eq(returndatasize(), 32))
            if success {
                res := mload(0)
            }
        }
    }
}


// File @1inch/limit-order-protocol/contracts/interfaces/[email protected]


pragma solidity 0.8.17;

interface IOrderMixin {
    /**
     * @notice Returns unfilled amount for order. Throws if order does not exist
     * @param orderHash Order's hash. Can be obtained by the `hashOrder` function
     * @return amount Unfilled amount
     */
    function remaining(bytes32 orderHash) external view returns(uint256 amount);

    /**
     * @notice Returns unfilled amount for order
     * @param orderHash Order's hash. Can be obtained by the `hashOrder` function
     * @return rawAmount Unfilled amount of order plus one if order exists. Otherwise 0
     */
    function remainingRaw(bytes32 orderHash) external view returns(uint256 rawAmount);

    /**
     * @notice Same as `remainingRaw` but for multiple orders
     * @param orderHashes Array of hashes
     * @return rawAmounts Array of amounts for each order plus one if order exists or 0 otherwise
     */
    function remainingsRaw(bytes32[] memory orderHashes) external view returns(uint256[] memory rawAmounts);

    /**
     * @notice Checks order predicate
     * @param order Order to check predicate for
     * @return result Predicate evaluation result. True if predicate allows to fill the order, false otherwise
     */
    function checkPredicate(OrderLib.Order calldata order) external view returns(bool result);

    /**
     * @notice Returns order hash according to EIP712 standard
     * @param order Order to get hash for
     * @return orderHash Hash of the order
     */
    function hashOrder(OrderLib.Order calldata order) external view returns(bytes32);

    /**
     * @notice Delegates execution to custom implementation. Could be used to validate if `transferFrom` works properly
     * @dev The function always reverts and returns the simulation results in revert data.
     * @param target Addresses that will be delegated
     * @param data Data that will be passed to delegatee
     */
    function simulate(address target, bytes calldata data) external;

    /**
     * @notice Cancels order.
     * @dev Order is cancelled by setting remaining amount to _ORDER_FILLED value
     * @param order Order quote to cancel
     * @return orderRemaining Unfilled amount of order before cancellation
     * @return orderHash Hash of the filled order
     */
    function cancelOrder(OrderLib.Order calldata order) external returns(uint256 orderRemaining, bytes32 orderHash);

    /**
     * @notice Fills an order. If one doesn't exist (first fill) it will be created using order.makerAssetData
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param interaction A call data for InteractiveNotificationReceiver. Taker may execute interaction after getting maker assets and before sending taker assets.
     * @param makingAmount Making amount
     * @param takingAmount Taking amount
     * @param skipPermitAndThresholdAmount Specifies maximum allowed takingAmount when takingAmount is zero, otherwise specifies minimum allowed makingAmount. Top-most bit specifies whether taker wants to skip maker's permit.
     * @return actualMakingAmount Actual amount transferred from maker to taker
     * @return actualTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrder(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount
    ) external payable returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash);

    /**
     * @notice Same as `fillOrderTo` but calls permit first,
     * allowing to approve token spending and make a swap in one transaction.
     * Also allows to specify funds destination instead of `msg.sender`
     * @dev See tests for examples
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param interaction A call data for InteractiveNotificationReceiver. Taker may execute interaction after getting maker assets and before sending taker assets.
     * @param makingAmount Making amount
     * @param takingAmount Taking amount
     * @param skipPermitAndThresholdAmount Specifies maximum allowed takingAmount when takingAmount is zero, otherwise specifies minimum allowed makingAmount. Top-most bit specifies whether taker wants to skip maker's permit.
     * @param target Address that will receive swap funds
     * @param permit Should consist of abiencoded token address and encoded `IERC20Permit.permit` call.
     * @return actualMakingAmount Actual amount transferred from maker to taker
     * @return actualTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderToWithPermit(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target,
        bytes calldata permit
    ) external returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash);

    /**
     * @notice Same as `fillOrder` but allows to specify funds destination instead of `msg.sender`
     * @param order_ Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param interaction A call data for InteractiveNotificationReceiver. Taker may execute interaction after getting maker assets and before sending taker assets.
     * @param makingAmount Making amount
     * @param takingAmount Taking amount
     * @param skipPermitAndThresholdAmount Specifies maximum allowed takingAmount when takingAmount is zero, otherwise specifies minimum allowed makingAmount. Top-most bit specifies whether taker wants to skip maker's permit.
     * @param target Address that will receive swap funds
     * @return actualMakingAmount Actual amount transferred from maker to taker
     * @return actualTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderTo(
        OrderLib.Order calldata order_,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target
    ) external payable returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash);
}


// File @1inch/limit-order-protocol/contracts/interfaces/[email protected]


pragma solidity 0.8.17;

/// @title Interface for interactor which acts between `maker => taker` and `taker => maker` transfers.
interface PreInteractionNotificationReceiver {
    function fillOrderPreInteraction(
        bytes32 orderHash,
        address maker,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingAmount,
        bytes memory interactiveData
    ) external;
}

interface PostInteractionNotificationReceiver {
    /// @notice Callback method that gets called after taker transferred funds to maker but before
    /// the opposite transfer happened
    function fillOrderPostInteraction(
        bytes32 orderHash,
        address maker,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingAmount,
        bytes memory interactiveData
    ) external;
}

interface InteractionNotificationReceiver {
    function fillOrderInteraction(
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        bytes memory interactiveData
    ) external returns(uint256 offeredTakingAmount);
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;











/// @title Regular Limit Order mixin
abstract contract OrderMixin is IOrderMixin, EIP712, PredicateHelper {
    using SafeERC20 for IERC20;
    using ArgumentsDecoder for bytes;
    using OrderLib for OrderLib.Order;

    error UnknownOrder();
    error AccessDenied();
    error AlreadyFilled();
    error PermitLengthTooLow();
    error ZeroTargetIsForbidden();
    error RemainingAmountIsZero();
    error PrivateOrder();
    error BadSignature();
    error ReentrancyDetected();
    error PredicateIsNotTrue();
    error OnlyOneAmountShouldBeZero();
    error TakingAmountTooHigh();
    error MakingAmountTooLow();
    error SwapWithZeroAmount();
    error TransferFromMakerToTakerFailed();
    error TransferFromTakerToMakerFailed();
    error WrongAmount();
    error WrongGetter();
    error GetAmountCallFailed();
    error TakingAmountIncreased();
    error SimulationResults(bool success, bytes res);

    /// @notice Emitted every time order gets filled, including partial fills
    event OrderFilled(
        address indexed maker,
        bytes32 orderHash,
        uint256 remaining
    );

    /// @notice Emitted when order gets cancelled
    event OrderCanceled(
        address indexed maker,
        bytes32 orderHash,
        uint256 remainingRaw
    );

    uint256 constant private _ORDER_DOES_NOT_EXIST = 0;
    uint256 constant private _ORDER_FILLED = 1;
    uint256 constant private _SKIP_PERMIT_FLAG = 1 << 255;
    uint256 constant private _THRESHOLD_MASK = ~_SKIP_PERMIT_FLAG;

    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    /// @notice Stores unfilled amounts for each order plus one.
    /// Therefore 0 means order doesn't exist and 1 means order was filled
    mapping(bytes32 => uint256) private _remaining;

    constructor(IWETH weth) {
        _WETH = weth;
    }

    /**
     * @notice See {IOrderMixin-remaining}.
     */
    function remaining(bytes32 orderHash) external view returns(uint256 /* amount */) {
        uint256 amount = _remaining[orderHash];
        if (amount == _ORDER_DOES_NOT_EXIST) revert UnknownOrder();
        unchecked { return amount - 1; }
    }

    /**
     * @notice See {IOrderMixin-remainingRaw}.
     */
    function remainingRaw(bytes32 orderHash) external view returns(uint256 /* rawAmount */) {
        return _remaining[orderHash];
    }

    /**
     * @notice See {IOrderMixin-remainingsRaw}.
     */
    function remainingsRaw(bytes32[] memory orderHashes) external view returns(uint256[] memory /* rawAmounts */) {
        uint256[] memory results = new uint256[](orderHashes.length);
        for (uint256 i = 0; i < orderHashes.length; i++) {
            results[i] = _remaining[orderHashes[i]];
        }
        return results;
    }

    /**
     * @notice See {IOrderMixin-simulate}.
     */
    function simulate(address target, bytes calldata data) external {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory result) = target.delegatecall(data);
        revert SimulationResults(success, result);
    }

    /**
     * @notice See {IOrderMixin-cancelOrder}.
     */
    function cancelOrder(OrderLib.Order calldata order) external returns(uint256 orderRemaining, bytes32 orderHash) {
        if (order.maker != msg.sender) revert AccessDenied();

        orderHash = hashOrder(order);
        orderRemaining = _remaining[orderHash];
        if (orderRemaining == _ORDER_FILLED) revert AlreadyFilled();
        emit OrderCanceled(msg.sender, orderHash, orderRemaining);
        _remaining[orderHash] = _ORDER_FILLED;
    }

    /**
     * @notice See {IOrderMixin-fillOrder}.
     */
    function fillOrder(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount
    ) external payable returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */, bytes32 /* orderHash */) {
        return fillOrderTo(order, signature, interaction, makingAmount, takingAmount, skipPermitAndThresholdAmount, msg.sender);
    }

    /**
     * @notice See {IOrderMixin-fillOrderToWithPermit}.
     */
    function fillOrderToWithPermit(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target,
        bytes calldata permit
    ) external returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */, bytes32 /* orderHash */) {
        if (permit.length < 20) revert PermitLengthTooLow();
        {  // Stack too deep
            (address token, bytes calldata permitData) = permit.decodeTargetAndCalldata();
            IERC20(token).safePermit(permitData);
        }
        return fillOrderTo(order, signature, interaction, makingAmount, takingAmount, skipPermitAndThresholdAmount, target);
    }

    /**
     * @notice See {IOrderMixin-fillOrderTo}.
     */
    function fillOrderTo(
        OrderLib.Order calldata order_,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target
    ) public payable returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash) {
        if (target == address(0)) revert ZeroTargetIsForbidden();
        orderHash = hashOrder(order_);

        OrderLib.Order calldata order = order_; // Helps with "Stack too deep"
        actualMakingAmount = makingAmount;
        actualTakingAmount = takingAmount;

        uint256 remainingMakingAmount = _remaining[orderHash];
        if (remainingMakingAmount == _ORDER_FILLED) revert RemainingAmountIsZero();
        if (order.allowedSender != address(0) && order.allowedSender != msg.sender) revert PrivateOrder();
        if (remainingMakingAmount == _ORDER_DOES_NOT_EXIST) {
            // First fill: validate order and permit maker asset
            if (!ECDSA.recoverOrIsValidSignature(order.maker, orderHash, signature)) revert BadSignature();
            remainingMakingAmount = order.makingAmount;

            bytes calldata permit = order.permit();
            if (skipPermitAndThresholdAmount & _SKIP_PERMIT_FLAG == 0 && permit.length >= 20) {
                // proceed only if taker is willing to execute permit and its length is enough to store address
                (address token, bytes calldata permitCalldata) = permit.decodeTargetAndCalldata();
                IERC20(token).safePermit(permitCalldata);
                if (_remaining[orderHash] != _ORDER_DOES_NOT_EXIST) revert ReentrancyDetected();
            }
        } else {
            unchecked { remainingMakingAmount -= 1; }
        }

        // Check if order is valid
        if (order.predicate().length > 0) {
            if (!checkPredicate(order)) revert PredicateIsNotTrue();
        }

        // Compute maker and taker assets amount
        if ((actualTakingAmount == 0) == (actualMakingAmount == 0)) {
            revert OnlyOneAmountShouldBeZero();
        } else if (actualTakingAmount == 0) {
            if (actualMakingAmount > remainingMakingAmount) {
                actualMakingAmount = remainingMakingAmount;
            }
            actualTakingAmount = _getTakingAmount(order.getTakingAmount(), order.makingAmount, actualMakingAmount, order.takingAmount, remainingMakingAmount, orderHash);
            uint256 thresholdAmount = skipPermitAndThresholdAmount & _THRESHOLD_MASK;
            // check that actual rate is not worse than what was expected
            // actualTakingAmount / actualMakingAmount <= thresholdAmount / makingAmount
            if (actualTakingAmount * makingAmount > thresholdAmount * actualMakingAmount) revert TakingAmountTooHigh();
        } else {
            actualMakingAmount = _getMakingAmount(order.getMakingAmount(), order.takingAmount, actualTakingAmount, order.makingAmount, remainingMakingAmount, orderHash);
            if (actualMakingAmount > remainingMakingAmount) {
                actualMakingAmount = remainingMakingAmount;
                actualTakingAmount = _getTakingAmount(order.getTakingAmount(), order.makingAmount, actualMakingAmount, order.takingAmount, remainingMakingAmount, orderHash);
                if (actualTakingAmount > takingAmount) revert TakingAmountIncreased();
            }
            uint256 thresholdAmount = skipPermitAndThresholdAmount & _THRESHOLD_MASK;
            // check that actual rate is not worse than what was expected
            // actualMakingAmount / actualTakingAmount >= thresholdAmount / takingAmount
            if (actualMakingAmount * takingAmount < thresholdAmount * actualTakingAmount) revert MakingAmountTooLow();
        }

        if (actualMakingAmount == 0 || actualTakingAmount == 0) revert SwapWithZeroAmount();

        // Update remaining amount in storage
        unchecked {
            remainingMakingAmount = remainingMakingAmount - actualMakingAmount;
            _remaining[orderHash] = remainingMakingAmount + 1;
        }
        emit OrderFilled(order_.maker, orderHash, remainingMakingAmount);

        // Maker can handle funds interactively
        if (order.preInteraction().length >= 20) {
            // proceed only if interaction length is enough to store address
            (address interactionTarget, bytes calldata interactionData) = order.preInteraction().decodeTargetAndCalldata();
            PreInteractionNotificationReceiver(interactionTarget).fillOrderPreInteraction(
                orderHash, order.maker, msg.sender, actualMakingAmount, actualTakingAmount, remainingMakingAmount, interactionData
            );
        }

        // Maker => Taker
        if (!_callTransferFrom(
            order.makerAsset,
            order.maker,
            target,
            actualMakingAmount,
            order.makerAssetData()
        )) revert TransferFromMakerToTakerFailed();

        if (interaction.length >= 20) {
            // proceed only if interaction length is enough to store address
            (address interactionTarget, bytes calldata interactionData) = interaction.decodeTargetAndCalldata();
            uint256 offeredTakingAmount = InteractionNotificationReceiver(interactionTarget).fillOrderInteraction(
                msg.sender, actualMakingAmount, actualTakingAmount, interactionData
            );

            if (offeredTakingAmount > actualTakingAmount &&
                !OrderLib.getterIsFrozen(order.getMakingAmount()) &&
                !OrderLib.getterIsFrozen(order.getTakingAmount()))
            {
                actualTakingAmount = offeredTakingAmount;
            }
        }

        // Taker => Maker
        if (order.takerAsset == address(_WETH) && msg.value > 0) {
            if (msg.value < actualTakingAmount) revert Errors.InvalidMsgValue();
            if (msg.value > actualTakingAmount) {
                unchecked {
                    (bool success, ) = msg.sender.call{value: msg.value - actualTakingAmount}("");  // solhint-disable-line avoid-low-level-calls
                    if (!success) revert Errors.ETHTransferFailed();
                }
            }
            _WETH.deposit{ value: actualTakingAmount }();
            _WETH.transfer(order.receiver == address(0) ? order.maker : order.receiver, actualTakingAmount);
        } else {
            if (msg.value != 0) revert Errors.InvalidMsgValue();
            if (!_callTransferFrom(
                order.takerAsset,
                msg.sender,
                order.receiver == address(0) ? order.maker : order.receiver,
                actualTakingAmount,
                order.takerAssetData()
            )) revert TransferFromTakerToMakerFailed();
        }

        // Maker can handle funds interactively
        if (order.postInteraction().length >= 20) {
            // proceed only if interaction length is enough to store address
            (address interactionTarget, bytes calldata interactionData) = order.postInteraction().decodeTargetAndCalldata();
            PostInteractionNotificationReceiver(interactionTarget).fillOrderPostInteraction(
                 orderHash, order.maker, msg.sender, actualMakingAmount, actualTakingAmount, remainingMakingAmount, interactionData
            );
        }
    }

    /**
     * @notice See {IOrderMixin-checkPredicate}.
     */
    function checkPredicate(OrderLib.Order calldata order) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(order.predicate());
        return success && res == 1;
    }

    /**
     * @notice See {IOrderMixin-hashOrder}.
     */
    function hashOrder(OrderLib.Order calldata order) public view returns(bytes32) {
        return order.hash(_domainSeparatorV4());
    }

    function _callTransferFrom(address asset, address from, address to, uint256 amount, bytes calldata input) private returns(bool success) {
        bytes4 selector = IERC20.transferFrom.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            calldatacopy(add(data, 0x64), input.offset, input.length)
            let status := call(gas(), asset, 0, data, add(0x64, input.length), 0x0, 0x20)
            success := and(status, or(iszero(returndatasize()), and(gt(returndatasize(), 31), eq(mload(0), 1))))
        }
    }

    function _getMakingAmount(
        bytes calldata getter,
        uint256 orderTakingAmount,
        uint256 requestedTakingAmount,
        uint256 orderMakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) private view returns(uint256) {
        if (getter.length == 0) {
            // Linear proportion
            return AmountCalculator.getMakingAmount(orderMakingAmount, orderTakingAmount, requestedTakingAmount);
        }
        return _callGetter(getter, orderTakingAmount, requestedTakingAmount, orderMakingAmount, remainingMakingAmount, orderHash);
    }

    function _getTakingAmount(
        bytes calldata getter,
        uint256 orderMakingAmount,
        uint256 requestedMakingAmount,
        uint256 orderTakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) private view returns(uint256) {
        if (getter.length == 0) {
            // Linear proportion
            return AmountCalculator.getTakingAmount(orderMakingAmount, orderTakingAmount, requestedMakingAmount);
        }
        return _callGetter(getter, orderMakingAmount, requestedMakingAmount, orderTakingAmount, remainingMakingAmount, orderHash);
    }

    function _callGetter(
        bytes calldata getter,
        uint256 orderExpectedAmount,
        uint256 requestedAmount,
        uint256 orderResultAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) private view returns(uint256) {
        if (getter.length == 1) {
            if (OrderLib.getterIsFrozen(getter)) {
                // On "x" getter calldata only exact amount is allowed
                if (requestedAmount != orderExpectedAmount) revert WrongAmount();
                return orderResultAmount;
            } else {
                revert WrongGetter();
            }
        } else {
            (address target, bytes calldata data) = getter.decodeTargetAndCalldata();
            (bool success, bytes memory result) = target.staticcall(abi.encodePacked(data, requestedAmount, remainingMakingAmount, orderHash));
            if (!success || result.length != 32) revert GetAmountCallFailed();
            return abi.decode(result, (uint256));
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File contracts/AggregationRouterV5.sol


pragma solidity 0.8.17;









/// @notice Main contract incorporates a number of routers to perform swaps and limit orders protocol to fill limit orders
contract AggregationRouterV5 is EIP712("1inch Aggregation Router", "5"), Ownable,
    ClipperRouter, GenericRouter, UnoswapRouter, UnoswapV3Router, OrderMixin, OrderRFQMixin
{
    using UniERC20 for IERC20;

    error ZeroAddress();

    /**
     * @dev Sets the wrapped eth token and clipper exhange interface
     * Both values are immutable: they can only be set once during
     * construction.
     */
    constructor(IWETH weth)
        UnoswapV3Router(weth)
        ClipperRouter(weth)
        OrderMixin(weth)
        OrderRFQMixin(weth)
    {
        if (address(weth) == address(0)) revert ZeroAddress();
    }

    /**
     * @notice Retrieves funds accidently sent directly to the contract address
     * @param token ERC20 token to retrieve
     * @param amount amount to retrieve
     */
    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(payable(msg.sender), amount);
    }

    /**
     * @notice Destroys the contract and sends eth to sender. Use with caution.
     * The only case when the use of the method is justified is if there is an exploit found.
     * And the damage from the exploit is greater than from just an urgent contract change.
     */
    function destroy() external onlyOwner {
        selfdestruct(payable(msg.sender));
    }

    function _receive() internal override(EthReceiver, OnlyWethReceiver) {
        EthReceiver._receive();
    }
}

// File: contracts/interfaces/IUniswapV2Pair.sol

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// File: contracts/interfaces/IUniswapV2ERC20.sol

pragma solidity >=0.5.0;

interface IUniswapV2ERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
}

// File: contracts/libraries/SafeMath.sol

pragma solidity =0.5.16;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMath {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/UniswapV2ERC20.sol

pragma solidity =0.5.16;



contract UniswapV2ERC20 is IUniswapV2ERC20 {
    using SafeMath for uint;

    string public constant name = 'Uniswap V2';
    string public constant symbol = 'UNI-V2';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/libraries/Math.sol

pragma solidity =0.5.16;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/libraries/UQ112x112.sol

pragma solidity =0.5.16;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// File: contracts/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/UniswapV2Pair.sol

pragma solidity =0.5.16;








contract UniswapV2Pair is IUniswapV2Pair, UniswapV2ERC20 {
    using SafeMath  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20(token0).balanceOf(address(this));
        uint balance1 = IERC20(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
           _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20(_token0).balanceOf(address(this));
        uint balance1 = IERC20(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20(token0).balanceOf(address(this)), IERC20(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

{"Constants.84ef19f8.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nlibrary Constants {\r\n    address internal constant ETH = 0x0000000000000000000000000000000000000000;\r\n}\r\n"},"Spender.3372a096.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nimport \"./Constants.84ef19f8.sol\";\r\n\r\ncontract Spender {\r\n    address public immutable metaswap;\r\n\r\n    constructor() public {\r\n        metaswap = msg.sender;\r\n    }\r\n\r\n    /// @dev Receives ether from swaps\r\n    fallback() external payable {}\r\n\r\n    function swap(address adapter, bytes calldata data) external payable {\r\n        require(msg.sender == metaswap, \"FORBIDDEN\");\r\n        require(adapter != address(0), \"ADAPTER_NOT_PROVIDED\");\r\n        _delegate(adapter, data, \"ADAPTER_DELEGATECALL_FAILED\");\r\n    }\r\n\r\n    /**\r\n     * @dev Performs a delegatecall and bubbles up the errors, adapted from\r\n     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol\r\n     * @param target Address of the contract to delegatecall\r\n     * @param data Data passed in the delegatecall\r\n     * @param errorMessage Fallback revert reason\r\n     */\r\n    function _delegate(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) private returns (bytes memory) {\r\n        // solhint-disable-next-line avoid-low-level-calls\r\n        (bool success, bytes memory returndata) = target.delegatecall(data);\r\n        if (success) {\r\n            return returndata;\r\n        } else {\r\n            // Look for revert reason and bubble it up if present\r\n            if (returndata.length \u003e 0) {\r\n                // The easiest way to bubble the revert reason is using memory via assembly\r\n\r\n                // solhint-disable-next-line no-inline-assembly\r\n                assembly {\r\n                    let returndata_size := mload(returndata)\r\n                    revert(add(32, returndata), returndata_size)\r\n                }\r\n            } else {\r\n                revert(errorMessage);\r\n            }\r\n        }\r\n    }\r\n}\r\n"}}

/* ===============================================
* Flattened with Solidifier by Coinage
* 
* https://solidifier.coina.ge
* ===============================================
*/


/*
-----------------------------------------------------------------
FILE INFORMATION
-----------------------------------------------------------------

file:       Owned.sol
version:    1.1
author:     Anton Jurisevic
            Dominic Romanowski

date:       2018-2-26

-----------------------------------------------------------------
MODULE DESCRIPTION
-----------------------------------------------------------------

An Owned contract, to be inherited by other contracts.
Requires its owner to be explicitly set in the constructor.
Provides an onlyOwner access modifier.

To change owner, the current owner must nominate the next owner,
who then has to accept the nomination. The nomination can be
cancelled before it is accepted by the new owner by having the
previous owner change the nomination (setting it to 0).

-----------------------------------------------------------------
*/

pragma solidity 0.4.25;

/**
 * @title A contract with an owner.
 * @notice Contract ownership can be transferred by first nominating the new owner,
 * who must then accept the ownership, which prevents accidental incorrect ownership transfers.
 */
contract Owned {
    address public owner;
    address public nominatedOwner;

    /**
     * @dev Owned Constructor
     */
    constructor(address _owner)
        public
    {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    /**
     * @notice Nominate a new owner of this contract.
     * @dev Only the current owner may nominate a new owner.
     */
    function nominateNewOwner(address _owner)
        external
        onlyOwner
    {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    /**
     * @notice Accept the nomination to be owner.
     */
    function acceptOwnership()
        external
    {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner
    {
        require(msg.sender == owner, "Only the contract owner may perform this action");
        _;
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


/*
-----------------------------------------------------------------
FILE INFORMATION
-----------------------------------------------------------------

file:       Proxy.sol
version:    1.3
author:     Anton Jurisevic

date:       2018-05-29

-----------------------------------------------------------------
MODULE DESCRIPTION
-----------------------------------------------------------------

A proxy contract that, if it does not recognise the function
being called on it, passes all value and call data to an
underlying target contract.

This proxy has the capacity to toggle between DELEGATECALL
and CALL style proxy functionality.

The former executes in the proxy's context, and so will preserve 
msg.sender and store data at the proxy address. The latter will not.
Therefore, any contract the proxy wraps in the CALL style must
implement the Proxyable interface, in order that it can pass msg.sender
into the underlying contract as the state parameter, messageSender.

-----------------------------------------------------------------
*/


contract Proxy is Owned {

    Proxyable public target;
    bool public useDELEGATECALL;

    constructor(address _owner)
        Owned(_owner)
        public
    {}

    function setTarget(Proxyable _target)
        external
        onlyOwner
    {
        target = _target;
        emit TargetUpdated(_target);
    }

    function setUseDELEGATECALL(bool value) 
        external
        onlyOwner
    {
        useDELEGATECALL = value;
    }

    function _emit(bytes callData, uint numTopics, bytes32 topic1, bytes32 topic2, bytes32 topic3, bytes32 topic4)
        external
        onlyTarget
    {
        uint size = callData.length;
        bytes memory _callData = callData;

        assembly {
            /* The first 32 bytes of callData contain its length (as specified by the abi). 
             * Length is assumed to be a uint256 and therefore maximum of 32 bytes
             * in length. It is also leftpadded to be a multiple of 32 bytes.
             * This means moving call_data across 32 bytes guarantees we correctly access
             * the data itself. */
            switch numTopics
            case 0 {
                log0(add(_callData, 32), size)
            } 
            case 1 {
                log1(add(_callData, 32), size, topic1)
            }
            case 2 {
                log2(add(_callData, 32), size, topic1, topic2)
            }
            case 3 {
                log3(add(_callData, 32), size, topic1, topic2, topic3)
            }
            case 4 {
                log4(add(_callData, 32), size, topic1, topic2, topic3, topic4)
            }
        }
    }

    function()
        external
        payable
    {
        if (useDELEGATECALL) {
            assembly {
                /* Copy call data into free memory region. */
                let free_ptr := mload(0x40)
                calldatacopy(free_ptr, 0, calldatasize)

                /* Forward all gas and call data to the target contract. */
                let result := delegatecall(gas, sload(target_slot), free_ptr, calldatasize, 0, 0)
                returndatacopy(free_ptr, 0, returndatasize)

                /* Revert if the call failed, otherwise return the result. */
                if iszero(result) { revert(free_ptr, returndatasize) }
                return(free_ptr, returndatasize)
            }
        } else {
            /* Here we are as above, but must send the messageSender explicitly 
             * since we are using CALL rather than DELEGATECALL. */
            target.setMessageSender(msg.sender);
            assembly {
                let free_ptr := mload(0x40)
                calldatacopy(free_ptr, 0, calldatasize)

                /* We must explicitly forward ether to the underlying contract as well. */
                let result := call(gas, sload(target_slot), callvalue, free_ptr, calldatasize, 0, 0)
                returndatacopy(free_ptr, 0, returndatasize)

                if iszero(result) { revert(free_ptr, returndatasize) }
                return(free_ptr, returndatasize)
            }
        }
    }

    modifier onlyTarget {
        require(Proxyable(msg.sender) == target, "Must be proxy target");
        _;
    }

    event TargetUpdated(Proxyable newTarget);
}


/*
-----------------------------------------------------------------
FILE INFORMATION
-----------------------------------------------------------------

file:       Proxyable.sol
version:    1.1
author:     Anton Jurisevic

date:       2018-05-15

checked:    Mike Spain
approved:   Samuel Brooks

-----------------------------------------------------------------
MODULE DESCRIPTION
-----------------------------------------------------------------

A proxyable contract that works hand in hand with the Proxy contract
to allow for anyone to interact with the underlying contract both
directly and through the proxy.

-----------------------------------------------------------------
*/


// This contract should be treated like an abstract contract
contract Proxyable is Owned {
    /* The proxy this contract exists behind. */
    Proxy public proxy;
    Proxy public integrationProxy;

    /* The caller of the proxy, passed through to this contract.
     * Note that every function using this member must apply the onlyProxy or
     * optionalProxy modifiers, otherwise their invocations can use stale values. */
    address messageSender;

    constructor(address _proxy, address _owner)
        Owned(_owner)
        public
    {
        proxy = Proxy(_proxy);
        emit ProxyUpdated(_proxy);
    }

    function setProxy(address _proxy)
        external
        onlyOwner
    {
        proxy = Proxy(_proxy);
        emit ProxyUpdated(_proxy);
    }

    function setIntegrationProxy(address _integrationProxy)
        external
        onlyOwner
    {
        integrationProxy = Proxy(_integrationProxy);
    }

    function setMessageSender(address sender)
        external
        onlyProxy
    {
        messageSender = sender;
    }

    modifier onlyProxy {
        require(Proxy(msg.sender) == proxy || Proxy(msg.sender) == integrationProxy, "Only the proxy can call");
        _;
    }

    modifier optionalProxy
    {
        if (Proxy(msg.sender) != proxy && Proxy(msg.sender) != integrationProxy) {
            messageSender = msg.sender;
        }
        _;
    }

    modifier optionalProxy_onlyOwner
    {
        if (Proxy(msg.sender) != proxy && Proxy(msg.sender) != integrationProxy) {
            messageSender = msg.sender;
        }
        require(messageSender == owner, "Owner only function");
        _;
    }

    event ProxyUpdated(address proxyAddress);
}


/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract IERC20 {
    function totalSupply() public view returns (uint);

    function balanceOf(address owner) public view returns (uint);

    function allowance(address owner, address spender) public view returns (uint);

    function transfer(address to, uint value) public returns (bool);

    function approve(address spender, uint value) public returns (bool);

    function transferFrom(address from, address to, uint value) public returns (bool);

    // ERC20 Optional
    function name() public view returns (string);
    function symbol() public view returns (string);
    function decimals() public view returns (uint8);

    event Transfer(
      address indexed from,
      address indexed to,
      uint value
    );

    event Approval(
      address indexed owner,
      address indexed spender,
      uint value
    );
}


/*
-----------------------------------------------------------------
FILE INFORMATION
-----------------------------------------------------------------

file:       ProxyERC20.sol
version:    1.0
author:     Jackson Chan, Clinton Ennis

date:       2019-06-19

-----------------------------------------------------------------
MODULE DESCRIPTION
-----------------------------------------------------------------

A proxy contract that is ERC20 compliant for the Synthetix Network.

If it does not recognise a function being called on it, passes all
value and call data to an underlying target contract.

The ERC20 standard has been explicitly implemented to ensure
contract to contract calls are compatable on MAINNET

-----------------------------------------------------------------
*/


contract ProxyERC20 is Proxy, IERC20 {

    constructor(address _owner)
        Proxy(_owner)
        public
    {}

    // ------------- ERC20 Details ------------- //

    function name() public view returns (string){
        // Immutable static call from target contract
        return IERC20(target).name();
    }

    function symbol() public view returns (string){
         // Immutable static call from target contract
        return IERC20(target).symbol();
    }

    function decimals() public view returns (uint8){
         // Immutable static call from target contract
        return IERC20(target).decimals();
    }

    // ------------- ERC20 Interface ------------- //

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        // Immutable static call from target contract
        return IERC20(target).totalSupply();
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        // Immutable static call from target contract
        return IERC20(target).balanceOf(owner);
    }

    /**
    * @dev Function to check the amount of tokens that an owner allowed to a spender.
    * @param owner address The address which owns the funds.
    * @param spender address The address which will spend the funds.
    * @return A uint256 specifying the amount of tokens still available for the spender.
    */
    function allowance(
        address owner,
        address spender
    )
        public
        view
        returns (uint256)
    {
        // Immutable static call from target contract
        return IERC20(target).allowance(owner, spender);
    }

    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        // Mutable state call requires the proxy to tell the target who the msg.sender is.
        target.setMessageSender(msg.sender);

        // Forward the ERC20 call to the target contract
        IERC20(target).transfer(to, value);

        // Event emitting will occur via Synthetix.Proxy._emit()
        return true;
    }

    /**
    * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
    * Beware that changing an allowance with this method brings the risk that someone may use both the old
    * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
    * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
    * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    * @param spender The address which will spend the funds.
    * @param value The amount of tokens to be spent.
    */
    function approve(address spender, uint256 value) public returns (bool) {
        // Mutable state call requires the proxy to tell the target who the msg.sender is.
        target.setMessageSender(msg.sender);

        // Forward the ERC20 call to the target contract
        IERC20(target).approve(spender, value);

        // Event emitting will occur via Synthetix.Proxy._emit()
        return true;
    }

    /**
    * @dev Transfer tokens from one address to another
    * @param from address The address which you want to send tokens from
    * @param to address The address which you want to transfer to
    * @param value uint256 the amount of tokens to be transferred
    */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        public
        returns (bool)
    {
        // Mutable state call requires the proxy to tell the target who the msg.sender is.
        target.setMessageSender(msg.sender);

        // Forward the ERC20 call to the target contract
        IERC20(target).transferFrom(from, to, value);

        // Event emitting will occur via Synthetix.Proxy._emit()
        return true;
    }
}

pragma solidity ^0.5.3;

/// @title Proxy - Generic proxy contract allows to execute all transactions applying the code of a master contract.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract Proxy {

    // masterCopy always needs to be first declared variable, to ensure that it is at the same location in the contracts to which calls are delegated.
    // To reduce deployment costs this variable is internal and needs to be retrieved via `getStorageAt`
    address internal masterCopy;

    /// @dev Constructor function sets address of master copy contract.
    /// @param _masterCopy Master copy address.
    constructor(address _masterCopy)
        public
    {
        require(_masterCopy != address(0), "Invalid master copy address provided");
        masterCopy = _masterCopy;
    }

    /// @dev Fallback function forwards all transactions and returns all received return data.
    function ()
        external
        payable
    {
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            let masterCopy := and(sload(0), 0xffffffffffffffffffffffffffffffffffffffff)
            // 0xa619486e == keccak("masterCopy()"). The value is right padded to 32-bytes with 0s
            if eq(calldataload(0), 0xa619486e00000000000000000000000000000000000000000000000000000000) {
                mstore(0, masterCopy)
                return(0, 0x20)
            }
            calldatacopy(0, 0, calldatasize())
            let success := delegatecall(gas, masterCopy, 0, calldatasize(), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if eq(success, 0) { revert(0, returndatasize()) }
            return(0, returndatasize())
        }
    }
}

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: Synthetix.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/Synthetix.sol
* Docs: https://docs.synthetix.io/contracts/Synthetix
*
* Contract Dependencies: 
*	- BaseSynthetix
*	- ExternStateToken
*	- IAddressResolver
*	- IERC20
*	- ISynthetix
*	- MixinResolver
*	- Owned
*	- Proxyable
*	- State
* Libraries: 
*	- SafeDecimalMath
*	- SafeMath
*	- VestingEntries
*
* MIT License
* ===========
*
* Copyright (c) 2022 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/



pragma solidity >=0.4.24;

// https://docs.synthetix.io/contracts/source/interfaces/ierc20
interface IERC20 {
    // ERC20 Optional Views
    function name() external view returns (string memory);

    function symbol() external view returns (string memory);

    function decimals() external view returns (uint8);

    // Views
    function totalSupply() external view returns (uint);

    function balanceOf(address owner) external view returns (uint);

    function allowance(address owner, address spender) external view returns (uint);

    // Mutative functions
    function transfer(address to, uint value) external returns (bool);

    function approve(address spender, uint value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Events
    event Transfer(address indexed from, address indexed to, uint value);

    event Approval(address indexed owner, address indexed spender, uint value);
}


// https://docs.synthetix.io/contracts/source/contracts/owned
contract Owned {
    address public owner;
    address public nominatedOwner;

    constructor(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/proxy
contract Proxy is Owned {
    Proxyable public target;

    constructor(address _owner) public Owned(_owner) {}

    function setTarget(Proxyable _target) external onlyOwner {
        target = _target;
        emit TargetUpdated(_target);
    }

    function _emit(
        bytes calldata callData,
        uint numTopics,
        bytes32 topic1,
        bytes32 topic2,
        bytes32 topic3,
        bytes32 topic4
    ) external onlyTarget {
        uint size = callData.length;
        bytes memory _callData = callData;

        assembly {
            /* The first 32 bytes of callData contain its length (as specified by the abi).
             * Length is assumed to be a uint256 and therefore maximum of 32 bytes
             * in length. It is also leftpadded to be a multiple of 32 bytes.
             * This means moving call_data across 32 bytes guarantees we correctly access
             * the data itself. */
            switch numTopics
                case 0 {
                    log0(add(_callData, 32), size)
                }
                case 1 {
                    log1(add(_callData, 32), size, topic1)
                }
                case 2 {
                    log2(add(_callData, 32), size, topic1, topic2)
                }
                case 3 {
                    log3(add(_callData, 32), size, topic1, topic2, topic3)
                }
                case 4 {
                    log4(add(_callData, 32), size, topic1, topic2, topic3, topic4)
                }
        }
    }

    // solhint-disable no-complex-fallback
    function() external payable {
        // Mutable call setting Proxyable.messageSender as this is using call not delegatecall
        target.setMessageSender(msg.sender);

        assembly {
            let free_ptr := mload(0x40)
            calldatacopy(free_ptr, 0, calldatasize)

            /* We must explicitly forward ether to the underlying contract as well. */
            let result := call(gas, sload(target_slot), callvalue, free_ptr, calldatasize, 0, 0)
            returndatacopy(free_ptr, 0, returndatasize)

            if iszero(result) {
                revert(free_ptr, returndatasize)
            }
            return(free_ptr, returndatasize)
        }
    }

    modifier onlyTarget {
        require(Proxyable(msg.sender) == target, "Must be proxy target");
        _;
    }

    event TargetUpdated(Proxyable newTarget);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/proxyable
contract Proxyable is Owned {
    // This contract should be treated like an abstract contract

    /* The proxy this contract exists behind. */
    Proxy public proxy;

    /* The caller of the proxy, passed through to this contract.
     * Note that every function using this member must apply the onlyProxy or
     * optionalProxy modifiers, otherwise their invocations can use stale values. */
    address public messageSender;

    constructor(address payable _proxy) internal {
        // This contract is abstract, and thus cannot be instantiated directly
        require(owner != address(0), "Owner must be set");

        proxy = Proxy(_proxy);
        emit ProxyUpdated(_proxy);
    }

    function setProxy(address payable _proxy) external onlyOwner {
        proxy = Proxy(_proxy);
        emit ProxyUpdated(_proxy);
    }

    function setMessageSender(address sender) external onlyProxy {
        messageSender = sender;
    }

    modifier onlyProxy {
        _onlyProxy();
        _;
    }

    function _onlyProxy() private view {
        require(Proxy(msg.sender) == proxy, "Only the proxy can call");
    }

    modifier optionalProxy {
        _optionalProxy();
        _;
    }

    function _optionalProxy() private {
        if (Proxy(msg.sender) != proxy && messageSender != msg.sender) {
            messageSender = msg.sender;
        }
    }

    modifier optionalProxy_onlyOwner {
        _optionalProxy_onlyOwner();
        _;
    }

    // solhint-disable-next-line func-name-mixedcase
    function _optionalProxy_onlyOwner() private {
        if (Proxy(msg.sender) != proxy && messageSender != msg.sender) {
            messageSender = msg.sender;
        }
        require(messageSender == owner, "Owner only function");
    }

    event ProxyUpdated(address proxyAddress);
}


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}


// Libraries


// https://docs.synthetix.io/contracts/source/libraries/safedecimalmath
library SafeDecimalMath {
    using SafeMath for uint;

    /* Number of decimal places in the representations. */
    uint8 public constant decimals = 18;
    uint8 public constant highPrecisionDecimals = 27;

    /* The number representing 1.0. */
    uint public constant UNIT = 10**uint(decimals);

    /* The number representing 1.0 for higher fidelity numbers. */
    uint public constant PRECISE_UNIT = 10**uint(highPrecisionDecimals);
    uint private constant UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR = 10**uint(highPrecisionDecimals - decimals);

    /**
     * @return Provides an interface to UNIT.
     */
    function unit() external pure returns (uint) {
        return UNIT;
    }

    /**
     * @return Provides an interface to PRECISE_UNIT.
     */
    function preciseUnit() external pure returns (uint) {
        return PRECISE_UNIT;
    }

    /**
     * @return The result of multiplying x and y, interpreting the operands as fixed-point
     * decimals.
     *
     * @dev A unit factor is divided out after the product of x and y is evaluated,
     * so that product must be less than 2**256. As this is an integer division,
     * the internal division always rounds down. This helps save on gas. Rounding
     * is more expensive on gas.
     */
    function multiplyDecimal(uint x, uint y) internal pure returns (uint) {
        /* Divide by UNIT to remove the extra factor introduced by the product. */
        return x.mul(y) / UNIT;
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of the specified precision unit.
     *
     * @dev The operands should be in the form of a the specified unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function _multiplyDecimalRound(
        uint x,
        uint y,
        uint precisionUnit
    ) private pure returns (uint) {
        /* Divide by UNIT to remove the extra factor introduced by the product. */
        uint quotientTimesTen = x.mul(y) / (precisionUnit / 10);

        if (quotientTimesTen % 10 >= 5) {
            quotientTimesTen += 10;
        }

        return quotientTimesTen / 10;
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of a precise unit.
     *
     * @dev The operands should be in the precise unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function multiplyDecimalRoundPrecise(uint x, uint y) internal pure returns (uint) {
        return _multiplyDecimalRound(x, y, PRECISE_UNIT);
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of a standard unit.
     *
     * @dev The operands should be in the standard unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function multiplyDecimalRound(uint x, uint y) internal pure returns (uint) {
        return _multiplyDecimalRound(x, y, UNIT);
    }

    /**
     * @return The result of safely dividing x and y. The return value is a high
     * precision decimal.
     *
     * @dev y is divided after the product of x and the standard precision unit
     * is evaluated, so the product of x and UNIT must be less than 2**256. As
     * this is an integer division, the result is always rounded down.
     * This helps save on gas. Rounding is more expensive on gas.
     */
    function divideDecimal(uint x, uint y) internal pure returns (uint) {
        /* Reintroduce the UNIT factor that will be divided out by y. */
        return x.mul(UNIT).div(y);
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * decimal in the precision unit specified in the parameter.
     *
     * @dev y is divided after the product of x and the specified precision unit
     * is evaluated, so the product of x and the specified precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function _divideDecimalRound(
        uint x,
        uint y,
        uint precisionUnit
    ) private pure returns (uint) {
        uint resultTimesTen = x.mul(precisionUnit * 10).div(y);

        if (resultTimesTen % 10 >= 5) {
            resultTimesTen += 10;
        }

        return resultTimesTen / 10;
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * standard precision decimal.
     *
     * @dev y is divided after the product of x and the standard precision unit
     * is evaluated, so the product of x and the standard precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function divideDecimalRound(uint x, uint y) internal pure returns (uint) {
        return _divideDecimalRound(x, y, UNIT);
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * high precision decimal.
     *
     * @dev y is divided after the product of x and the high precision unit
     * is evaluated, so the product of x and the high precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function divideDecimalRoundPrecise(uint x, uint y) internal pure returns (uint) {
        return _divideDecimalRound(x, y, PRECISE_UNIT);
    }

    /**
     * @dev Convert a standard decimal representation to a high precision one.
     */
    function decimalToPreciseDecimal(uint i) internal pure returns (uint) {
        return i.mul(UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR);
    }

    /**
     * @dev Convert a high precision decimal to a standard decimal representation.
     */
    function preciseDecimalToDecimal(uint i) internal pure returns (uint) {
        uint quotientTimesTen = i / (UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR / 10);

        if (quotientTimesTen % 10 >= 5) {
            quotientTimesTen += 10;
        }

        return quotientTimesTen / 10;
    }

    // Computes `a - b`, setting the value to 0 if b > a.
    function floorsub(uint a, uint b) internal pure returns (uint) {
        return b >= a ? 0 : a - b;
    }

    /* ---------- Utilities ---------- */
    /*
     * Absolute value of the input, returned as a signed number.
     */
    function signedAbs(int x) internal pure returns (int) {
        return x < 0 ? -x : x;
    }

    /*
     * Absolute value of the input, returned as an unsigned number.
     */
    function abs(int x) internal pure returns (uint) {
        return uint(signedAbs(x));
    }
}


// Inheritance


// https://docs.synthetix.io/contracts/source/contracts/state
contract State is Owned {
    // the address of the contract that can modify variables
    // this can only be changed by the owner of this contract
    address public associatedContract;

    constructor(address _associatedContract) internal {
        // This contract is abstract, and thus cannot be instantiated directly
        require(owner != address(0), "Owner must be set");

        associatedContract = _associatedContract;
        emit AssociatedContractUpdated(_associatedContract);
    }

    /* ========== SETTERS ========== */

    // Change the associated contract to a new address
    function setAssociatedContract(address _associatedContract) external onlyOwner {
        associatedContract = _associatedContract;
        emit AssociatedContractUpdated(_associatedContract);
    }

    /* ========== MODIFIERS ========== */

    modifier onlyAssociatedContract {
        require(msg.sender == associatedContract, "Only the associated contract can perform this action");
        _;
    }

    /* ========== EVENTS ========== */

    event AssociatedContractUpdated(address associatedContract);
}


// Inheritance


// https://docs.synthetix.io/contracts/source/contracts/tokenstate
contract TokenState is Owned, State {
    /* ERC20 fields. */
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    constructor(address _owner, address _associatedContract) public Owned(_owner) State(_associatedContract) {}

    /* ========== SETTERS ========== */

    /**
     * @notice Set ERC20 allowance.
     * @dev Only the associated contract may call this.
     * @param tokenOwner The authorising party.
     * @param spender The authorised party.
     * @param value The total value the authorised party may spend on the
     * authorising party's behalf.
     */
    function setAllowance(
        address tokenOwner,
        address spender,
        uint value
    ) external onlyAssociatedContract {
        allowance[tokenOwner][spender] = value;
    }

    /**
     * @notice Set the balance in a given account
     * @dev Only the associated contract may call this.
     * @param account The account whose value to set.
     * @param value The new balance of the given account.
     */
    function setBalanceOf(address account, uint value) external onlyAssociatedContract {
        balanceOf[account] = value;
    }
}


// Inheritance


// Libraries


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/externstatetoken
contract ExternStateToken is Owned, Proxyable {
    using SafeMath for uint;
    using SafeDecimalMath for uint;

    /* ========== STATE VARIABLES ========== */

    /* Stores balances and allowances. */
    TokenState public tokenState;

    /* Other ERC20 fields. */
    string public name;
    string public symbol;
    uint public totalSupply;
    uint8 public decimals;

    constructor(
        address payable _proxy,
        TokenState _tokenState,
        string memory _name,
        string memory _symbol,
        uint _totalSupply,
        uint8 _decimals,
        address _owner
    ) public Owned(_owner) Proxyable(_proxy) {
        tokenState = _tokenState;

        name = _name;
        symbol = _symbol;
        totalSupply = _totalSupply;
        decimals = _decimals;
    }

    /* ========== VIEWS ========== */

    /**
     * @notice Returns the ERC20 allowance of one party to spend on behalf of another.
     * @param owner The party authorising spending of their funds.
     * @param spender The party spending tokenOwner's funds.
     */
    function allowance(address owner, address spender) public view returns (uint) {
        return tokenState.allowance(owner, spender);
    }

    /**
     * @notice Returns the ERC20 token balance of a given account.
     */
    function balanceOf(address account) external view returns (uint) {
        return tokenState.balanceOf(account);
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    /**
     * @notice Set the address of the TokenState contract.
     * @dev This can be used to "pause" transfer functionality, by pointing the tokenState at 0x000..
     * as balances would be unreachable.
     */
    function setTokenState(TokenState _tokenState) external optionalProxy_onlyOwner {
        tokenState = _tokenState;
        emitTokenStateUpdated(address(_tokenState));
    }

    function _internalTransfer(
        address from,
        address to,
        uint value
    ) internal returns (bool) {
        /* Disallow transfers to irretrievable-addresses. */
        require(to != address(0) && to != address(this) && to != address(proxy), "Cannot transfer to this address");

        // Insufficient balance will be handled by the safe subtraction.
        tokenState.setBalanceOf(from, tokenState.balanceOf(from).sub(value));
        tokenState.setBalanceOf(to, tokenState.balanceOf(to).add(value));

        // Emit a standard ERC20 transfer event
        emitTransfer(from, to, value);

        return true;
    }

    /**
     * @dev Perform an ERC20 token transfer. Designed to be called by transfer functions possessing
     * the onlyProxy or optionalProxy modifiers.
     */
    function _transferByProxy(
        address from,
        address to,
        uint value
    ) internal returns (bool) {
        return _internalTransfer(from, to, value);
    }

    /*
     * @dev Perform an ERC20 token transferFrom. Designed to be called by transferFrom functions
     * possessing the optionalProxy or optionalProxy modifiers.
     */
    function _transferFromByProxy(
        address sender,
        address from,
        address to,
        uint value
    ) internal returns (bool) {
        /* Insufficient allowance will be handled by the safe subtraction. */
        tokenState.setAllowance(from, sender, tokenState.allowance(from, sender).sub(value));
        return _internalTransfer(from, to, value);
    }

    /**
     * @notice Approves spender to transfer on the message sender's behalf.
     */
    function approve(address spender, uint value) public optionalProxy returns (bool) {
        address sender = messageSender;

        tokenState.setAllowance(sender, spender, value);
        emitApproval(sender, spender, value);
        return true;
    }

    /* ========== EVENTS ========== */
    function addressToBytes32(address input) internal pure returns (bytes32) {
        return bytes32(uint256(uint160(input)));
    }

    event Transfer(address indexed from, address indexed to, uint value);
    bytes32 internal constant TRANSFER_SIG = keccak256("Transfer(address,address,uint256)");

    function emitTransfer(
        address from,
        address to,
        uint value
    ) internal {
        proxy._emit(abi.encode(value), 3, TRANSFER_SIG, addressToBytes32(from), addressToBytes32(to), 0);
    }

    event Approval(address indexed owner, address indexed spender, uint value);
    bytes32 internal constant APPROVAL_SIG = keccak256("Approval(address,address,uint256)");

    function emitApproval(
        address owner,
        address spender,
        uint value
    ) internal {
        proxy._emit(abi.encode(value), 3, APPROVAL_SIG, addressToBytes32(owner), addressToBytes32(spender), 0);
    }

    event TokenStateUpdated(address newTokenState);
    bytes32 internal constant TOKENSTATEUPDATED_SIG = keccak256("TokenStateUpdated(address)");

    function emitTokenStateUpdated(address newTokenState) internal {
        proxy._emit(abi.encode(newTokenState), 1, TOKENSTATEUPDATED_SIG, 0, 0, 0);
    }
}


// https://docs.synthetix.io/contracts/source/interfaces/iaddressresolver
interface IAddressResolver {
    function getAddress(bytes32 name) external view returns (address);

    function getSynth(bytes32 key) external view returns (address);

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address);
}


// https://docs.synthetix.io/contracts/source/interfaces/isynth
interface ISynth {
    // Views
    function currencyKey() external view returns (bytes32);

    function transferableSynths(address account) external view returns (uint);

    // Mutative functions
    function transferAndSettle(address to, uint value) external returns (bool);

    function transferFromAndSettle(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Restricted: used internally to Synthetix
    function burn(address account, uint amount) external;

    function issue(address account, uint amount) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/iissuer
interface IIssuer {
    // Views

    function allNetworksDebtInfo()
        external
        view
        returns (
            uint256 debt,
            uint256 sharesSupply,
            bool isStale
        );

    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function canBurnSynths(address account) external view returns (bool);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function collateralisationRatioAndAnyRatesInvalid(address _issuer)
        external
        view
        returns (uint cratio, bool anyRateIsInvalid);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint debtBalance);

    function issuanceRatio() external view returns (uint);

    function lastIssueEvent(address account) external view returns (uint);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function minimumStakeTime() external view returns (uint);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function getSynths(bytes32[] calldata currencyKeys) external view returns (ISynth[] memory);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey, bool excludeOtherCollateral) external view returns (uint);

    function transferableSynthetixAndAnyRateIsInvalid(address account, uint balance)
        external
        view
        returns (uint transferable, bool anyRateIsInvalid);

    function liquidationAmounts(address account, bool isSelfLiquidation)
        external
        view
        returns (
            uint totalRedeemed,
            uint debtToRemove,
            uint escrowToLiquidate,
            uint initialDebtBalance
        );

    // Restricted: used internally to Synthetix
    function addSynths(ISynth[] calldata synthsToAdd) external;

    function issueSynths(address from, uint amount) external;

    function issueSynthsOnBehalf(
        address issueFor,
        address from,
        uint amount
    ) external;

    function issueMaxSynths(address from) external;

    function issueMaxSynthsOnBehalf(address issueFor, address from) external;

    function burnSynths(address from, uint amount) external;

    function burnSynthsOnBehalf(
        address burnForAddress,
        address from,
        uint amount
    ) external;

    function burnSynthsToTarget(address from) external;

    function burnSynthsToTargetOnBehalf(address burnForAddress, address from) external;

    function burnForRedemption(
        address deprecatedSynthProxy,
        address account,
        uint balance
    ) external;

    function setCurrentPeriodId(uint128 periodId) external;

    function liquidateAccount(address account, bool isSelfLiquidation)
        external
        returns (
            uint totalRedeemed,
            uint debtRemoved,
            uint escrowToLiquidate
        );

    function issueSynthsWithoutDebt(
        bytes32 currencyKey,
        address to,
        uint amount
    ) external returns (bool rateInvalid);

    function burnSynthsWithoutDebt(
        bytes32 currencyKey,
        address to,
        uint amount
    ) external returns (bool rateInvalid);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/addressresolver
contract AddressResolver is Owned, IAddressResolver {
    mapping(bytes32 => address) public repository;

    constructor(address _owner) public Owned(_owner) {}

    /* ========== RESTRICTED FUNCTIONS ========== */

    function importAddresses(bytes32[] calldata names, address[] calldata destinations) external onlyOwner {
        require(names.length == destinations.length, "Input lengths must match");

        for (uint i = 0; i < names.length; i++) {
            bytes32 name = names[i];
            address destination = destinations[i];
            repository[name] = destination;
            emit AddressImported(name, destination);
        }
    }

    /* ========= PUBLIC FUNCTIONS ========== */

    function rebuildCaches(MixinResolver[] calldata destinations) external {
        for (uint i = 0; i < destinations.length; i++) {
            destinations[i].rebuildCache();
        }
    }

    /* ========== VIEWS ========== */

    function areAddressesImported(bytes32[] calldata names, address[] calldata destinations) external view returns (bool) {
        for (uint i = 0; i < names.length; i++) {
            if (repository[names[i]] != destinations[i]) {
                return false;
            }
        }
        return true;
    }

    function getAddress(bytes32 name) external view returns (address) {
        return repository[name];
    }

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address) {
        address _foundAddress = repository[name];
        require(_foundAddress != address(0), reason);
        return _foundAddress;
    }

    function getSynth(bytes32 key) external view returns (address) {
        IIssuer issuer = IIssuer(repository["Issuer"]);
        require(address(issuer) != address(0), "Cannot find Issuer address");
        return address(issuer.synths(key));
    }

    /* ========== EVENTS ========== */

    event AddressImported(bytes32 name, address destination);
}


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/mixinresolver
contract MixinResolver {
    AddressResolver public resolver;

    mapping(bytes32 => address) private addressCache;

    constructor(address _resolver) internal {
        resolver = AddressResolver(_resolver);
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function combineArrays(bytes32[] memory first, bytes32[] memory second)
        internal
        pure
        returns (bytes32[] memory combination)
    {
        combination = new bytes32[](first.length + second.length);

        for (uint i = 0; i < first.length; i++) {
            combination[i] = first[i];
        }

        for (uint j = 0; j < second.length; j++) {
            combination[first.length + j] = second[j];
        }
    }

    /* ========== PUBLIC FUNCTIONS ========== */

    // Note: this function is public not external in order for it to be overridden and invoked via super in subclasses
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {}

    function rebuildCache() public {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        // The resolver must call this function whenver it updates its state
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // Note: can only be invoked once the resolver has all the targets needed added
            address destination =
                resolver.requireAndGetAddress(name, string(abi.encodePacked("Resolver missing target: ", name)));
            addressCache[name] = destination;
            emit CacheUpdated(name, destination);
        }
    }

    /* ========== VIEWS ========== */

    function isResolverCached() external view returns (bool) {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // false if our cache is invalid or if the resolver doesn't have the required address
            if (resolver.getAddress(name) != addressCache[name] || addressCache[name] == address(0)) {
                return false;
            }
        }

        return true;
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function requireAndGetAddress(bytes32 name) internal view returns (address) {
        address _foundAddress = addressCache[name];
        require(_foundAddress != address(0), string(abi.encodePacked("Missing address: ", name)));
        return _foundAddress;
    }

    /* ========== EVENTS ========== */

    event CacheUpdated(bytes32 name, address destination);
}


interface IVirtualSynth {
    // Views
    function balanceOfUnderlying(address account) external view returns (uint);

    function rate() external view returns (uint);

    function readyToSettle() external view returns (bool);

    function secsLeftInWaitingPeriod() external view returns (uint);

    function settled() external view returns (bool);

    function synth() external view returns (ISynth);

    // Mutative functions
    function settle(address account) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/isynthetix
interface ISynthetix {
    // Views
    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint);

    function isWaitingPeriod(bytes32 currencyKey) external view returns (bool);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey) external view returns (uint);

    function totalIssuedSynthsExcludeOtherCollateral(bytes32 currencyKey) external view returns (uint);

    function transferableSynthetix(address account) external view returns (uint transferable);

    function getFirstNonZeroEscrowIndex(address account) external view returns (uint);

    // Mutative Functions
    function burnSynths(uint amount) external;

    function burnSynthsOnBehalf(address burnForAddress, uint amount) external;

    function burnSynthsToTarget() external;

    function burnSynthsToTargetOnBehalf(address burnForAddress) external;

    function exchange(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeOnBehalf(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeWithTracking(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address rewardAddress,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeWithTrackingForInitiator(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address rewardAddress,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeOnBehalfWithTracking(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address rewardAddress,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeWithVirtual(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        bytes32 trackingCode
    ) external returns (uint amountReceived, IVirtualSynth vSynth);

    function exchangeAtomically(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        bytes32 trackingCode,
        uint minAmount
    ) external returns (uint amountReceived);

    function issueMaxSynths() external;

    function issueMaxSynthsOnBehalf(address issueForAddress) external;

    function issueSynths(uint amount) external;

    function issueSynthsOnBehalf(address issueForAddress, uint amount) external;

    function mint() external returns (bool);

    function settle(bytes32 currencyKey)
        external
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntries
        );

    // Liquidations
    function liquidateDelinquentAccount(address account) external returns (bool);

    function liquidateDelinquentAccountEscrowIndex(address account, uint escrowStartIndex) external returns (bool);

    function liquidateSelf() external returns (bool);

    // Restricted Functions

    function mintSecondary(address account, uint amount) external;

    function mintSecondaryRewards(uint amount) external;

    function burnSecondary(address account, uint amount) external;

    function revokeAllEscrow(address account) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/isystemstatus
interface ISystemStatus {
    struct Status {
        bool canSuspend;
        bool canResume;
    }

    struct Suspension {
        bool suspended;
        // reason is an integer code,
        // 0 => no reason, 1 => upgrading, 2+ => defined by system usage
        uint248 reason;
    }

    // Views
    function accessControl(bytes32 section, address account) external view returns (bool canSuspend, bool canResume);

    function requireSystemActive() external view;

    function systemSuspended() external view returns (bool);

    function requireIssuanceActive() external view;

    function requireExchangeActive() external view;

    function requireFuturesActive() external view;

    function requireFuturesMarketActive(bytes32 marketKey) external view;

    function requireExchangeBetweenSynthsAllowed(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view;

    function requireSynthActive(bytes32 currencyKey) external view;

    function synthSuspended(bytes32 currencyKey) external view returns (bool);

    function requireSynthsActive(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view;

    function systemSuspension() external view returns (bool suspended, uint248 reason);

    function issuanceSuspension() external view returns (bool suspended, uint248 reason);

    function exchangeSuspension() external view returns (bool suspended, uint248 reason);

    function futuresSuspension() external view returns (bool suspended, uint248 reason);

    function synthExchangeSuspension(bytes32 currencyKey) external view returns (bool suspended, uint248 reason);

    function synthSuspension(bytes32 currencyKey) external view returns (bool suspended, uint248 reason);

    function futuresMarketSuspension(bytes32 marketKey) external view returns (bool suspended, uint248 reason);

    function getSynthExchangeSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory exchangeSuspensions, uint256[] memory reasons);

    function getSynthSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons);

    function getFuturesMarketSuspensions(bytes32[] calldata marketKeys)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons);

    // Restricted functions
    function suspendIssuance(uint256 reason) external;

    function suspendSynth(bytes32 currencyKey, uint256 reason) external;

    function suspendFuturesMarket(bytes32 marketKey, uint256 reason) external;

    function updateAccessControl(
        bytes32 section,
        address account,
        bool canSuspend,
        bool canResume
    ) external;
}


pragma experimental ABIEncoderV2;


// https://docs.synthetix.io/contracts/source/interfaces/iexchanger
interface IExchanger {
    struct ExchangeEntrySettlement {
        bytes32 src;
        uint amount;
        bytes32 dest;
        uint reclaim;
        uint rebate;
        uint srcRoundIdAtPeriodEnd;
        uint destRoundIdAtPeriodEnd;
        uint timestamp;
    }

    struct ExchangeEntry {
        uint sourceRate;
        uint destinationRate;
        uint destinationAmount;
        uint exchangeFeeRate;
        uint exchangeDynamicFeeRate;
        uint roundIdForSrc;
        uint roundIdForDest;
        uint sourceAmountAfterSettlement;
    }

    // Views
    function calculateAmountAfterSettlement(
        address from,
        bytes32 currencyKey,
        uint amount,
        uint refunded
    ) external view returns (uint amountAfterSettlement);

    function isSynthRateInvalid(bytes32 currencyKey) external view returns (bool);

    function maxSecsLeftInWaitingPeriod(address account, bytes32 currencyKey) external view returns (uint);

    function settlementOwing(address account, bytes32 currencyKey)
        external
        view
        returns (
            uint reclaimAmount,
            uint rebateAmount,
            uint numEntries
        );

    function hasWaitingPeriodOrSettlementOwing(address account, bytes32 currencyKey) external view returns (bool);

    function feeRateForExchange(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view returns (uint);

    function dynamicFeeRateForExchange(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey)
        external
        view
        returns (uint feeRate, bool tooVolatile);

    function getAmountsForExchange(
        uint sourceAmount,
        bytes32 sourceCurrencyKey,
        bytes32 destinationCurrencyKey
    )
        external
        view
        returns (
            uint amountReceived,
            uint fee,
            uint exchangeFeeRate
        );

    function priceDeviationThresholdFactor() external view returns (uint);

    function waitingPeriodSecs() external view returns (uint);

    function lastExchangeRate(bytes32 currencyKey) external view returns (uint);

    // Mutative functions
    function exchange(
        address exchangeForAddress,
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress,
        bool virtualSynth,
        address rewardAddress,
        bytes32 trackingCode
    ) external returns (uint amountReceived, IVirtualSynth vSynth);

    function exchangeAtomically(
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress,
        bytes32 trackingCode,
        uint minAmount
    ) external returns (uint amountReceived);

    function settle(address from, bytes32 currencyKey)
        external
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntries
        );
}

// Used to have strongly-typed access to internal mutative functions in Synthetix
interface ISynthetixInternal {
    function emitExchangeTracking(
        bytes32 trackingCode,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        uint256 fee
    ) external;

    function emitSynthExchange(
        address account,
        bytes32 fromCurrencyKey,
        uint fromAmount,
        bytes32 toCurrencyKey,
        uint toAmount,
        address toAddress
    ) external;

    function emitAtomicSynthExchange(
        address account,
        bytes32 fromCurrencyKey,
        uint fromAmount,
        bytes32 toCurrencyKey,
        uint toAmount,
        address toAddress
    ) external;

    function emitExchangeReclaim(
        address account,
        bytes32 currencyKey,
        uint amount
    ) external;

    function emitExchangeRebate(
        address account,
        bytes32 currencyKey,
        uint amount
    ) external;
}

interface IExchangerInternalDebtCache {
    function updateCachedSynthDebtsWithRates(bytes32[] calldata currencyKeys, uint[] calldata currencyRates) external;

    function updateCachedSynthDebts(bytes32[] calldata currencyKeys) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/irewardsdistribution
interface IRewardsDistribution {
    // Structs
    struct DistributionData {
        address destination;
        uint amount;
    }

    // Views
    function authority() external view returns (address);

    function distributions(uint index) external view returns (address destination, uint amount); // DistributionData

    function distributionsLength() external view returns (uint);

    // Mutative Functions
    function distributeRewards(uint amount) external returns (bool);
}


interface ILiquidator {
    // Views
    function issuanceRatio() external view returns (uint);

    function liquidationDelay() external view returns (uint);

    function liquidationRatio() external view returns (uint);

    function liquidationEscrowDuration() external view returns (uint);

    function liquidationPenalty() external view returns (uint);

    function selfLiquidationPenalty() external view returns (uint);

    function liquidateReward() external view returns (uint);

    function flagReward() external view returns (uint);

    function liquidationCollateralRatio() external view returns (uint);

    function getLiquidationDeadlineForAccount(address account) external view returns (uint);

    function getLiquidationCallerForAccount(address account) external view returns (address);

    function isLiquidationOpen(address account, bool isSelfLiquidation) external view returns (bool);

    function isLiquidationDeadlinePassed(address account) external view returns (bool);

    function calculateAmountToFixCollateral(
        uint debtBalance,
        uint collateral,
        uint penalty
    ) external view returns (uint);

    function liquidationAmounts(address account, bool isSelfLiquidation)
        external
        view
        returns (
            uint totalRedeemed,
            uint debtToRemove,
            uint escrowToLiquidate,
            uint initialDebtBalance
        );

    // Mutative Functions
    function flagAccountForLiquidation(address account) external;

    // Restricted: used internally to Synthetix contracts
    function removeAccountInLiquidation(address account) external;

    function checkAndRemoveAccountInLiquidation(address account) external;
}


interface ILiquidatorRewards {
    // Views

    function earned(address account) external view returns (uint256);

    // Mutative

    function getReward(address account) external;

    function notifyRewardAmount(uint256 reward) external;

    function updateEntry(address account) external;
}


library VestingEntries {
    struct VestingEntry {
        uint64 endTime;
        uint256 escrowAmount;
    }
    struct VestingEntryWithID {
        uint64 endTime;
        uint256 escrowAmount;
        uint256 entryID;
    }
}

/// SIP-252: this is the interface for immutable V2 escrow (renamed with suffix Frozen).
/// These sources need to exist here and match on-chain frozen contracts for tests and reference.
/// the reason for the naming mess is that the immutable LiquidatorRewards expects a working
/// RewardEscrowV2 resolver entry for its getReward method, so the "new" (would be V3)
/// needs to be found at that entry for liq-rewards to function.
interface IRewardEscrowV2Frozen {
    // Views
    function balanceOf(address account) external view returns (uint);

    function numVestingEntries(address account) external view returns (uint);

    function totalEscrowedBalance() external view returns (uint);

    function totalEscrowedAccountBalance(address account) external view returns (uint);

    function totalVestedAccountBalance(address account) external view returns (uint);

    function getVestingQuantity(address account, uint256[] calldata entryIDs) external view returns (uint);

    function getVestingSchedules(
        address account,
        uint256 index,
        uint256 pageSize
    ) external view returns (VestingEntries.VestingEntryWithID[] memory);

    function getAccountVestingEntryIDs(
        address account,
        uint256 index,
        uint256 pageSize
    ) external view returns (uint256[] memory);

    function getVestingEntryClaimable(address account, uint256 entryID) external view returns (uint);

    function getVestingEntry(address account, uint256 entryID) external view returns (uint64, uint256);

    // Mutative functions
    function vest(uint256[] calldata entryIDs) external;

    function createEscrowEntry(
        address beneficiary,
        uint256 deposit,
        uint256 duration
    ) external;

    function appendVestingEntry(
        address account,
        uint256 quantity,
        uint256 duration
    ) external;

    function migrateVestingSchedule(address _addressToMigrate) external;

    function migrateAccountEscrowBalances(
        address[] calldata accounts,
        uint256[] calldata escrowBalances,
        uint256[] calldata vestedBalances
    ) external;

    // Account Merging
    function startMergingWindow() external;

    function mergeAccount(address accountToMerge, uint256[] calldata entryIDs) external;

    function nominateAccountToMerge(address account) external;

    function accountMergingIsOpen() external view returns (bool);

    // L2 Migration
    function importVestingEntries(
        address account,
        uint256 escrowedAmount,
        VestingEntries.VestingEntry[] calldata vestingEntries
    ) external;

    // Return amount of SNX transfered to SynthetixBridgeToOptimism deposit contract
    function burnForMigration(address account, uint256[] calldata entryIDs)
        external
        returns (uint256 escrowedAccountBalance, VestingEntries.VestingEntry[] memory vestingEntries);

    function nextEntryId() external view returns (uint);

    function vestingSchedules(address account, uint256 entryId) external view returns (VestingEntries.VestingEntry memory);

    function accountVestingEntryIDs(address account, uint256 index) external view returns (uint);

    //function totalEscrowedAccountBalance(address account) external view returns (uint);
    //function totalVestedAccountBalance(address account) external view returns (uint);
}


interface IRewardEscrowV2Storage {
    /// Views
    function numVestingEntries(address account) external view returns (uint);

    function totalEscrowedAccountBalance(address account) external view returns (uint);

    function totalVestedAccountBalance(address account) external view returns (uint);

    function totalEscrowedBalance() external view returns (uint);

    function nextEntryId() external view returns (uint);

    function vestingSchedules(address account, uint256 entryId) external view returns (VestingEntries.VestingEntry memory);

    function accountVestingEntryIDs(address account, uint256 index) external view returns (uint);

    /// Mutative
    function setZeroAmount(address account, uint entryId) external;

    function setZeroAmountUntilTarget(
        address account,
        uint startIndex,
        uint targetAmount
    )
        external
        returns (
            uint total,
            uint endIndex,
            uint lastEntryTime
        );

    function updateEscrowAccountBalance(address account, int delta) external;

    function updateVestedAccountBalance(address account, int delta) external;

    function updateTotalEscrowedBalance(int delta) external;

    function addVestingEntry(address account, VestingEntries.VestingEntry calldata entry) external returns (uint);

    // setFallbackRewardEscrow is used for configuration but not used by contracts
}

/// this should remain backwards compatible to IRewardEscrowV2Frozen
/// ideally this would be done by inheriting from that interface
/// but solidity v0.5 doesn't support interface inheritance
interface IRewardEscrowV2 {
    // Views
    function balanceOf(address account) external view returns (uint);

    function numVestingEntries(address account) external view returns (uint);

    function totalEscrowedBalance() external view returns (uint);

    function totalEscrowedAccountBalance(address account) external view returns (uint);

    function totalVestedAccountBalance(address account) external view returns (uint);

    function getVestingQuantity(address account, uint256[] calldata entryIDs) external view returns (uint);

    function getVestingSchedules(
        address account,
        uint256 index,
        uint256 pageSize
    ) external view returns (VestingEntries.VestingEntryWithID[] memory);

    function getAccountVestingEntryIDs(
        address account,
        uint256 index,
        uint256 pageSize
    ) external view returns (uint256[] memory);

    function getVestingEntryClaimable(address account, uint256 entryID) external view returns (uint);

    function getVestingEntry(address account, uint256 entryID) external view returns (uint64, uint256);

    // Mutative functions
    function vest(uint256[] calldata entryIDs) external;

    function createEscrowEntry(
        address beneficiary,
        uint256 deposit,
        uint256 duration
    ) external;

    function appendVestingEntry(
        address account,
        uint256 quantity,
        uint256 duration
    ) external;

    function migrateVestingSchedule(address _addressToMigrate) external;

    function migrateAccountEscrowBalances(
        address[] calldata accounts,
        uint256[] calldata escrowBalances,
        uint256[] calldata vestedBalances
    ) external;

    // Account Merging
    function startMergingWindow() external;

    function mergeAccount(address accountToMerge, uint256[] calldata entryIDs) external;

    function nominateAccountToMerge(address account) external;

    function accountMergingIsOpen() external view returns (bool);

    // L2 Migration
    function importVestingEntries(
        address account,
        uint256 escrowedAmount,
        VestingEntries.VestingEntry[] calldata vestingEntries
    ) external;

    // Return amount of SNX transfered to SynthetixBridgeToOptimism deposit contract
    function burnForMigration(address account, uint256[] calldata entryIDs)
        external
        returns (uint256 escrowedAccountBalance, VestingEntries.VestingEntry[] memory vestingEntries);

    function nextEntryId() external view returns (uint);

    function vestingSchedules(address account, uint256 entryId) external view returns (VestingEntries.VestingEntry memory);

    function accountVestingEntryIDs(address account, uint256 index) external view returns (uint);

    /// below are methods not available in IRewardEscrowV2Frozen

    // revoke entries for liquidations (access controlled to Synthetix)
    function revokeFrom(
        address account,
        address recipient,
        uint targetAmount,
        uint startIndex
    ) external;
}


// Inheritance


// Internal references


contract BaseSynthetix is IERC20, ExternStateToken, MixinResolver, ISynthetix {
    // ========== STATE VARIABLES ==========

    // Available Synths which can be used with the system
    string public constant TOKEN_NAME = "Synthetix Network Token";
    string public constant TOKEN_SYMBOL = "SNX";
    uint8 public constant DECIMALS = 18;
    bytes32 public constant sUSD = "sUSD";

    // ========== ADDRESS RESOLVER CONFIGURATION ==========
    bytes32 private constant CONTRACT_SYSTEMSTATUS = "SystemStatus";
    bytes32 private constant CONTRACT_EXCHANGER = "Exchanger";
    bytes32 private constant CONTRACT_ISSUER = "Issuer";
    bytes32 private constant CONTRACT_REWARDSDISTRIBUTION = "RewardsDistribution";
    bytes32 private constant CONTRACT_LIQUIDATORREWARDS = "LiquidatorRewards";
    bytes32 private constant CONTRACT_LIQUIDATOR = "Liquidator";
    bytes32 private constant CONTRACT_REWARDESCROW_V2 = "RewardEscrowV2";
    bytes32 private constant CONTRACT_V3_LEGACYMARKET = "LegacyMarket";

    // ========== CONSTRUCTOR ==========

    constructor(
        address payable _proxy,
        TokenState _tokenState,
        address _owner,
        uint _totalSupply,
        address _resolver
    )
        public
        ExternStateToken(_proxy, _tokenState, TOKEN_NAME, TOKEN_SYMBOL, _totalSupply, DECIMALS, _owner)
        MixinResolver(_resolver)
    {}

    // ========== VIEWS ==========

    // Note: use public visibility so that it can be invoked in a subclass
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {
        addresses = new bytes32[](7);
        addresses[0] = CONTRACT_SYSTEMSTATUS;
        addresses[1] = CONTRACT_EXCHANGER;
        addresses[2] = CONTRACT_ISSUER;
        addresses[3] = CONTRACT_REWARDSDISTRIBUTION;
        addresses[4] = CONTRACT_LIQUIDATORREWARDS;
        addresses[5] = CONTRACT_LIQUIDATOR;
        addresses[6] = CONTRACT_REWARDESCROW_V2;
    }

    function systemStatus() internal view returns (ISystemStatus) {
        return ISystemStatus(requireAndGetAddress(CONTRACT_SYSTEMSTATUS));
    }

    function exchanger() internal view returns (IExchanger) {
        return IExchanger(requireAndGetAddress(CONTRACT_EXCHANGER));
    }

    function issuer() internal view returns (IIssuer) {
        return IIssuer(requireAndGetAddress(CONTRACT_ISSUER));
    }

    function rewardsDistribution() internal view returns (IRewardsDistribution) {
        return IRewardsDistribution(requireAndGetAddress(CONTRACT_REWARDSDISTRIBUTION));
    }

    function liquidatorRewards() internal view returns (ILiquidatorRewards) {
        return ILiquidatorRewards(requireAndGetAddress(CONTRACT_LIQUIDATORREWARDS));
    }

    function rewardEscrowV2() internal view returns (IRewardEscrowV2) {
        return IRewardEscrowV2(requireAndGetAddress(CONTRACT_REWARDESCROW_V2));
    }

    function liquidator() internal view returns (ILiquidator) {
        return ILiquidator(requireAndGetAddress(CONTRACT_LIQUIDATOR));
    }

    function debtBalanceOf(address account, bytes32 currencyKey) external view returns (uint) {
        return issuer().debtBalanceOf(account, currencyKey);
    }

    function totalIssuedSynths(bytes32 currencyKey) external view returns (uint) {
        return issuer().totalIssuedSynths(currencyKey, false);
    }

    function totalIssuedSynthsExcludeOtherCollateral(bytes32 currencyKey) external view returns (uint) {
        return issuer().totalIssuedSynths(currencyKey, true);
    }

    function availableCurrencyKeys() external view returns (bytes32[] memory) {
        return issuer().availableCurrencyKeys();
    }

    function availableSynthCount() external view returns (uint) {
        return issuer().availableSynthCount();
    }

    function availableSynths(uint index) external view returns (ISynth) {
        return issuer().availableSynths(index);
    }

    function synths(bytes32 currencyKey) external view returns (ISynth) {
        return issuer().synths(currencyKey);
    }

    function synthsByAddress(address synthAddress) external view returns (bytes32) {
        return issuer().synthsByAddress(synthAddress);
    }

    function isWaitingPeriod(bytes32 currencyKey) external view returns (bool) {
        return exchanger().maxSecsLeftInWaitingPeriod(messageSender, currencyKey) > 0;
    }

    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid) {
        return issuer().anySynthOrSNXRateIsInvalid();
    }

    function maxIssuableSynths(address account) external view returns (uint maxIssuable) {
        return issuer().maxIssuableSynths(account);
    }

    function remainingIssuableSynths(address account)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        )
    {
        return issuer().remainingIssuableSynths(account);
    }

    function collateralisationRatio(address _issuer) external view returns (uint) {
        return issuer().collateralisationRatio(_issuer);
    }

    function collateral(address account) external view returns (uint) {
        return issuer().collateral(account);
    }

    function transferableSynthetix(address account) external view returns (uint transferable) {
        (transferable, ) = issuer().transferableSynthetixAndAnyRateIsInvalid(account, tokenState.balanceOf(account));
    }

    /// the index of the first non zero RewardEscrowV2 entry for an account in order of iteration over accountVestingEntryIDs.
    /// This is intended as a convenience off-chain view for liquidators to calculate the startIndex to pass
    /// into liquidateDelinquentAccountEscrowIndex to save gas.
    function getFirstNonZeroEscrowIndex(address account) external view returns (uint) {
        uint numIds = rewardEscrowV2().numVestingEntries(account);
        uint entryID;
        VestingEntries.VestingEntry memory entry;
        for (uint i = 0; i < numIds; i++) {
            entryID = rewardEscrowV2().accountVestingEntryIDs(account, i);
            entry = rewardEscrowV2().vestingSchedules(account, entryID);
            if (entry.escrowAmount > 0) {
                return i;
            }
        }
        revert("all entries are zero");
    }

    function _canTransfer(address account, uint value) internal view returns (bool) {
        // Always allow legacy market to transfer
        // note if legacy market is not yet available this will just return 0 address and it  will never be true
        address legacyMarketAddress = resolver.getAddress(CONTRACT_V3_LEGACYMARKET);
        if ((messageSender != address(0) && messageSender == legacyMarketAddress) || account == legacyMarketAddress) {
            return true;
        }

        if (issuer().debtBalanceOf(account, sUSD) > 0) {
            (uint transferable, bool anyRateIsInvalid) =
                issuer().transferableSynthetixAndAnyRateIsInvalid(account, tokenState.balanceOf(account));
            require(value <= transferable, "Cannot transfer staked or escrowed SNX");
            require(!anyRateIsInvalid, "A synth or SNX rate is invalid");
        }

        return true;
    }

    // ========== MUTATIVE FUNCTIONS ==========

    function exchange(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external exchangeActive(sourceCurrencyKey, destinationCurrencyKey) optionalProxy returns (uint amountReceived) {
        (amountReceived, ) = exchanger().exchange(
            messageSender,
            messageSender,
            sourceCurrencyKey,
            sourceAmount,
            destinationCurrencyKey,
            messageSender,
            false,
            messageSender,
            bytes32(0)
        );
    }

    function exchangeOnBehalf(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external exchangeActive(sourceCurrencyKey, destinationCurrencyKey) optionalProxy returns (uint amountReceived) {
        (amountReceived, ) = exchanger().exchange(
            exchangeForAddress,
            messageSender,
            sourceCurrencyKey,
            sourceAmount,
            destinationCurrencyKey,
            exchangeForAddress,
            false,
            exchangeForAddress,
            bytes32(0)
        );
    }

    function settle(bytes32 currencyKey)
        external
        optionalProxy
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntriesSettled
        )
    {
        return exchanger().settle(messageSender, currencyKey);
    }

    function exchangeWithTracking(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address rewardAddress,
        bytes32 trackingCode
    ) external exchangeActive(sourceCurrencyKey, destinationCurrencyKey) optionalProxy returns (uint amountReceived) {
        (amountReceived, ) = exchanger().exchange(
            messageSender,
            messageSender,
            sourceCurrencyKey,
            sourceAmount,
            destinationCurrencyKey,
            messageSender,
            false,
            rewardAddress,
            trackingCode
        );
    }

    function exchangeOnBehalfWithTracking(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address rewardAddress,
        bytes32 trackingCode
    ) external exchangeActive(sourceCurrencyKey, destinationCurrencyKey) optionalProxy returns (uint amountReceived) {
        (amountReceived, ) = exchanger().exchange(
            exchangeForAddress,
            messageSender,
            sourceCurrencyKey,
            sourceAmount,
            destinationCurrencyKey,
            exchangeForAddress,
            false,
            rewardAddress,
            trackingCode
        );
    }

    function transfer(address to, uint value) external onlyProxyOrInternal systemActive returns (bool) {
        // Ensure they're not trying to exceed their locked amount -- only if they have debt.
        _canTransfer(messageSender, value);

        // Perform the transfer: if there is a problem an exception will be thrown in this call.
        _transferByProxy(messageSender, to, value);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint value
    ) external onlyProxyOrInternal systemActive returns (bool) {
        // Ensure they're not trying to exceed their locked amount -- only if they have debt.
        _canTransfer(from, value);

        // Perform the transfer: if there is a problem,
        // an exception will be thrown in this call.
        return _transferFromByProxy(messageSender, from, to, value);
    }

    // SIP-252: migration of SNX token balance from old to new escrow rewards contract
    function migrateEscrowContractBalance() external onlyOwner {
        address from = resolver.requireAndGetAddress("RewardEscrowV2Frozen", "Old escrow address unset");
        // technically the below could use `rewardEscrowV2()`, but in the case of a migration it's better to avoid
        // using the cached value and read the most updated one directly from the resolver
        address to = resolver.requireAndGetAddress("RewardEscrowV2", "New escrow address unset");
        require(to != from, "cannot migrate to same address");

        uint currentBalance = tokenState.balanceOf(from);
        // allow no-op for idempotent migration steps in case action was performed already
        if (currentBalance > 0) {
            _internalTransfer(from, to, currentBalance);
        }
    }

    function issueSynths(uint amount) external issuanceActive optionalProxy {
        return issuer().issueSynths(messageSender, amount);
    }

    function issueSynthsOnBehalf(address issueForAddress, uint amount) external issuanceActive optionalProxy {
        return issuer().issueSynthsOnBehalf(issueForAddress, messageSender, amount);
    }

    function issueMaxSynths() external issuanceActive optionalProxy {
        return issuer().issueMaxSynths(messageSender);
    }

    function issueMaxSynthsOnBehalf(address issueForAddress) external issuanceActive optionalProxy {
        return issuer().issueMaxSynthsOnBehalf(issueForAddress, messageSender);
    }

    function burnSynths(uint amount) external issuanceActive optionalProxy {
        return issuer().burnSynths(messageSender, amount);
    }

    function burnSynthsOnBehalf(address burnForAddress, uint amount) external issuanceActive optionalProxy {
        return issuer().burnSynthsOnBehalf(burnForAddress, messageSender, amount);
    }

    function burnSynthsToTarget() external issuanceActive optionalProxy {
        return issuer().burnSynthsToTarget(messageSender);
    }

    function burnSynthsToTargetOnBehalf(address burnForAddress) external issuanceActive optionalProxy {
        return issuer().burnSynthsToTargetOnBehalf(burnForAddress, messageSender);
    }

    /// @notice Force liquidate a delinquent account and distribute the redeemed SNX rewards amongst the appropriate recipients.
    /// @dev The SNX transfers will revert if the amount to send is more than balanceOf account (i.e. due to escrowed balance).
    function liquidateDelinquentAccount(address account) external systemActive optionalProxy returns (bool) {
        return _liquidateDelinquentAccount(account, 0, messageSender);
    }

    /// @param escrowStartIndex: index into the account's vesting entries list to start iterating from
    /// when liquidating from escrow in order to save gas (the default method uses 0 as default)
    function liquidateDelinquentAccountEscrowIndex(address account, uint escrowStartIndex)
        external
        systemActive
        optionalProxy
        returns (bool)
    {
        return _liquidateDelinquentAccount(account, escrowStartIndex, messageSender);
    }

    /// @notice Force liquidate a delinquent account and distribute the redeemed SNX rewards amongst the appropriate recipients.
    /// @dev The SNX transfers will revert if the amount to send is more than balanceOf account (i.e. due to escrowed balance).
    function _liquidateDelinquentAccount(
        address account,
        uint escrowStartIndex,
        address liquidatorAccount
    ) internal returns (bool) {
        // ensure the user has no liquidation rewards (also counted towards collateral) outstanding
        liquidatorRewards().getReward(account);

        (uint totalRedeemed, uint debtToRemove, uint escrowToLiquidate) = issuer().liquidateAccount(account, false);

        // This transfers the to-be-liquidated part of escrow to the account (!) as liquid SNX.
        // It is transferred to the account instead of to the rewards because of the liquidator / flagger
        // rewards that may need to be paid (so need to be transferrable, to avoid edge cases)
        if (escrowToLiquidate > 0) {
            rewardEscrowV2().revokeFrom(account, account, escrowToLiquidate, escrowStartIndex);
        }

        emitAccountLiquidated(account, totalRedeemed, debtToRemove, liquidatorAccount);

        // First, pay out the flag and liquidate rewards.
        uint flagReward = liquidator().flagReward();
        uint liquidateReward = liquidator().liquidateReward();

        // Transfer the flagReward to the account who flagged this account for liquidation.
        address flagger = liquidator().getLiquidationCallerForAccount(account);
        bool flagRewardTransferSucceeded = _transferByProxy(account, flagger, flagReward);
        require(flagRewardTransferSucceeded, "Flag reward transfer did not succeed");

        // Transfer the liquidateReward to liquidator (the account who invoked this liquidation).
        bool liquidateRewardTransferSucceeded = _transferByProxy(account, liquidatorAccount, liquidateReward);
        require(liquidateRewardTransferSucceeded, "Liquidate reward transfer did not succeed");

        if (totalRedeemed > 0) {
            // Send the remaining SNX to the LiquidatorRewards contract.
            bool liquidatorRewardTransferSucceeded = _transferByProxy(account, address(liquidatorRewards()), totalRedeemed);
            require(liquidatorRewardTransferSucceeded, "Transfer to LiquidatorRewards failed");

            // Inform the LiquidatorRewards contract about the incoming SNX rewards.
            liquidatorRewards().notifyRewardAmount(totalRedeemed);
        }

        return true;
    }

    /// @notice Allows an account to self-liquidate anytime its c-ratio is below the target issuance ratio.
    function liquidateSelf() external systemActive optionalProxy returns (bool) {
        // must store liquidated account address because below functions may attempt to transfer SNX which changes messageSender
        address liquidatedAccount = messageSender;

        // ensure the user has no liquidation rewards (also counted towards collateral) outstanding
        liquidatorRewards().getReward(liquidatedAccount);

        // Self liquidate the account (`isSelfLiquidation` flag must be set to `true`).
        // escrowToLiquidate is unused because it cannot be used for self-liquidations
        (uint totalRedeemed, uint debtRemoved, ) = issuer().liquidateAccount(liquidatedAccount, true);
        require(debtRemoved > 0, "cannot self liquidate");

        emitAccountLiquidated(liquidatedAccount, totalRedeemed, debtRemoved, liquidatedAccount);

        // Transfer the redeemed SNX to the LiquidatorRewards contract.
        // Reverts if amount to redeem is more than balanceOf account (i.e. due to escrowed balance).
        bool success = _transferByProxy(liquidatedAccount, address(liquidatorRewards()), totalRedeemed);
        require(success, "Transfer to LiquidatorRewards failed");

        // Inform the LiquidatorRewards contract about the incoming SNX rewards.
        liquidatorRewards().notifyRewardAmount(totalRedeemed);

        return success;
    }

    /**
     * @notice allows for migration from v2x to v3 when an account has pending escrow entries
     */
    function revokeAllEscrow(address account) external systemActive {
        address legacyMarketAddress = resolver.getAddress(CONTRACT_V3_LEGACYMARKET);
        require(msg.sender == legacyMarketAddress, "Only LegacyMarket can revoke escrow");
        rewardEscrowV2().revokeFrom(account, msg.sender, rewardEscrowV2().totalEscrowedAccountBalance(account), 0);
    }

    function exchangeWithTrackingForInitiator(
        bytes32,
        uint,
        bytes32,
        address,
        bytes32
    ) external returns (uint) {
        _notImplemented();
    }

    function exchangeWithVirtual(
        bytes32,
        uint,
        bytes32,
        bytes32
    ) external returns (uint, IVirtualSynth) {
        _notImplemented();
    }

    function exchangeAtomically(
        bytes32,
        uint,
        bytes32,
        bytes32,
        uint
    ) external returns (uint) {
        _notImplemented();
    }

    function mint() external returns (bool) {
        _notImplemented();
    }

    function mintSecondary(address, uint) external {
        _notImplemented();
    }

    function mintSecondaryRewards(uint) external {
        _notImplemented();
    }

    function burnSecondary(address, uint) external {
        _notImplemented();
    }

    function _notImplemented() internal pure {
        revert("Cannot be run on this layer");
    }

    // ========== MODIFIERS ==========

    modifier systemActive() {
        _systemActive();
        _;
    }

    function _systemActive() private view {
        systemStatus().requireSystemActive();
    }

    modifier issuanceActive() {
        _issuanceActive();
        _;
    }

    function _issuanceActive() private view {
        systemStatus().requireIssuanceActive();
    }

    modifier exchangeActive(bytes32 src, bytes32 dest) {
        _exchangeActive(src, dest);
        _;
    }

    function _exchangeActive(bytes32 src, bytes32 dest) private view {
        systemStatus().requireExchangeBetweenSynthsAllowed(src, dest);
    }

    modifier onlyExchanger() {
        _onlyExchanger();
        _;
    }

    function _onlyExchanger() private view {
        require(msg.sender == address(exchanger()), "Only Exchanger can invoke this");
    }

    modifier onlyProxyOrInternal {
        _onlyProxyOrInternal();
        _;
    }

    function _onlyProxyOrInternal() internal {
        if (msg.sender == address(proxy)) {
            // allow proxy through, messageSender should be already set correctly
            return;
        } else if (_isInternalTransferCaller(msg.sender)) {
            // optionalProxy behaviour only for the internal legacy contracts
            messageSender = msg.sender;
        } else {
            revert("Only the proxy can call");
        }
    }

    /// some legacy internal contracts use transfer methods directly on implementation
    /// which isn't supported due to SIP-238 for other callers
    function _isInternalTransferCaller(address caller) internal view returns (bool) {
        // These entries are not required or cached in order to allow them to not exist (==address(0))
        // e.g. due to not being available on L2 or at some future point in time.
        return
            // ordered to reduce gas for more frequent calls, bridge first, vesting after, legacy last
            caller == resolver.getAddress("SynthetixBridgeToOptimism") ||
            caller == resolver.getAddress("RewardEscrowV2") ||
            // legacy contracts
            caller == resolver.getAddress("RewardEscrow") ||
            caller == resolver.getAddress("SynthetixEscrow") ||
            caller == resolver.getAddress("TradingRewards") ||
            caller == resolver.getAddress("Depot");
    }

    // ========== EVENTS ==========
    event AccountLiquidated(address indexed account, uint snxRedeemed, uint amountLiquidated, address liquidator);
    bytes32 internal constant ACCOUNTLIQUIDATED_SIG = keccak256("AccountLiquidated(address,uint256,uint256,address)");

    function emitAccountLiquidated(
        address account,
        uint256 snxRedeemed,
        uint256 amountLiquidated,
        address liquidator
    ) internal {
        proxy._emit(
            abi.encode(snxRedeemed, amountLiquidated, liquidator),
            2,
            ACCOUNTLIQUIDATED_SIG,
            addressToBytes32(account),
            0,
            0
        );
    }

    event SynthExchange(
        address indexed account,
        bytes32 fromCurrencyKey,
        uint256 fromAmount,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        address toAddress
    );
    bytes32 internal constant SYNTH_EXCHANGE_SIG =
        keccak256("SynthExchange(address,bytes32,uint256,bytes32,uint256,address)");

    function emitSynthExchange(
        address account,
        bytes32 fromCurrencyKey,
        uint256 fromAmount,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        address toAddress
    ) external onlyExchanger {
        proxy._emit(
            abi.encode(fromCurrencyKey, fromAmount, toCurrencyKey, toAmount, toAddress),
            2,
            SYNTH_EXCHANGE_SIG,
            addressToBytes32(account),
            0,
            0
        );
    }

    event ExchangeTracking(bytes32 indexed trackingCode, bytes32 toCurrencyKey, uint256 toAmount, uint256 fee);
    bytes32 internal constant EXCHANGE_TRACKING_SIG = keccak256("ExchangeTracking(bytes32,bytes32,uint256,uint256)");

    function emitExchangeTracking(
        bytes32 trackingCode,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        uint256 fee
    ) external onlyExchanger {
        proxy._emit(abi.encode(toCurrencyKey, toAmount, fee), 2, EXCHANGE_TRACKING_SIG, trackingCode, 0, 0);
    }

    event ExchangeReclaim(address indexed account, bytes32 currencyKey, uint amount);
    bytes32 internal constant EXCHANGERECLAIM_SIG = keccak256("ExchangeReclaim(address,bytes32,uint256)");

    function emitExchangeReclaim(
        address account,
        bytes32 currencyKey,
        uint256 amount
    ) external onlyExchanger {
        proxy._emit(abi.encode(currencyKey, amount), 2, EXCHANGERECLAIM_SIG, addressToBytes32(account), 0, 0);
    }

    event ExchangeRebate(address indexed account, bytes32 currencyKey, uint amount);
    bytes32 internal constant EXCHANGEREBATE_SIG = keccak256("ExchangeRebate(address,bytes32,uint256)");

    function emitExchangeRebate(
        address account,
        bytes32 currencyKey,
        uint256 amount
    ) external onlyExchanger {
        proxy._emit(abi.encode(currencyKey, amount), 2, EXCHANGEREBATE_SIG, addressToBytes32(account), 0, 0);
    }
}


// https://docs.synthetix.io/contracts/source/interfaces/irewardescrow
interface IRewardEscrow {
    // Views
    function balanceOf(address account) external view returns (uint);

    function numVestingEntries(address account) external view returns (uint);

    function totalEscrowedAccountBalance(address account) external view returns (uint);

    function totalVestedAccountBalance(address account) external view returns (uint);

    function getVestingScheduleEntry(address account, uint index) external view returns (uint[2] memory);

    function getNextVestingIndex(address account) external view returns (uint);

    // Mutative functions
    function appendVestingEntry(address account, uint quantity) external;

    function vest() external;
}


// https://docs.synthetix.io/contracts/source/interfaces/isupplyschedule
interface ISupplySchedule {
    // Views
    function mintableSupply() external view returns (uint);

    function isMintable() external view returns (bool);

    function minterReward() external view returns (uint);

    // Mutative functions
    function recordMintEvent(uint supplyMinted) external returns (uint);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/synthetix
contract Synthetix is BaseSynthetix {
    bytes32 public constant CONTRACT_NAME = "Synthetix";

    // ========== ADDRESS RESOLVER CONFIGURATION ==========
    bytes32 private constant CONTRACT_REWARD_ESCROW = "RewardEscrow";
    bytes32 private constant CONTRACT_SUPPLYSCHEDULE = "SupplySchedule";

    // ========== CONSTRUCTOR ==========

    constructor(
        address payable _proxy,
        TokenState _tokenState,
        address _owner,
        uint _totalSupply,
        address _resolver
    ) public BaseSynthetix(_proxy, _tokenState, _owner, _totalSupply, _resolver) {}

    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {
        bytes32[] memory existingAddresses = BaseSynthetix.resolverAddressesRequired();
        bytes32[] memory newAddresses = new bytes32[](2);
        newAddresses[0] = CONTRACT_REWARD_ESCROW;
        newAddresses[1] = CONTRACT_SUPPLYSCHEDULE;
        return combineArrays(existingAddresses, newAddresses);
    }

    // ========== VIEWS ==========

    function rewardEscrow() internal view returns (IRewardEscrow) {
        return IRewardEscrow(requireAndGetAddress(CONTRACT_REWARD_ESCROW));
    }

    function supplySchedule() internal view returns (ISupplySchedule) {
        return ISupplySchedule(requireAndGetAddress(CONTRACT_SUPPLYSCHEDULE));
    }

    // ========== OVERRIDDEN FUNCTIONS ==========

    function exchangeWithVirtual(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        bytes32 trackingCode
    )
        external
        exchangeActive(sourceCurrencyKey, destinationCurrencyKey)
        optionalProxy
        returns (uint amountReceived, IVirtualSynth vSynth)
    {
        return
            exchanger().exchange(
                messageSender,
                messageSender,
                sourceCurrencyKey,
                sourceAmount,
                destinationCurrencyKey,
                messageSender,
                true,
                messageSender,
                trackingCode
            );
    }

    // SIP-140 The initiating user of this exchange will receive the proceeds of the exchange
    // Note: this function may have unintended consequences if not understood correctly. Please
    // read SIP-140 for more information on the use-case
    function exchangeWithTrackingForInitiator(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address rewardAddress,
        bytes32 trackingCode
    ) external exchangeActive(sourceCurrencyKey, destinationCurrencyKey) optionalProxy returns (uint amountReceived) {
        (amountReceived, ) = exchanger().exchange(
            messageSender,
            messageSender,
            sourceCurrencyKey,
            sourceAmount,
            destinationCurrencyKey,
            // solhint-disable avoid-tx-origin
            tx.origin,
            false,
            rewardAddress,
            trackingCode
        );
    }

    function exchangeAtomically(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        bytes32 trackingCode,
        uint minAmount
    ) external exchangeActive(sourceCurrencyKey, destinationCurrencyKey) optionalProxy returns (uint amountReceived) {
        return
            exchanger().exchangeAtomically(
                messageSender,
                sourceCurrencyKey,
                sourceAmount,
                destinationCurrencyKey,
                messageSender,
                trackingCode,
                minAmount
            );
    }

    function settle(bytes32 currencyKey)
        external
        optionalProxy
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntriesSettled
        )
    {
        return exchanger().settle(messageSender, currencyKey);
    }

    function mint() external issuanceActive returns (bool) {
        require(address(rewardsDistribution()) != address(0), "RewardsDistribution not set");

        ISupplySchedule _supplySchedule = supplySchedule();
        IRewardsDistribution _rewardsDistribution = rewardsDistribution();

        uint supplyToMint = _supplySchedule.mintableSupply();
        require(supplyToMint > 0, "No supply is mintable");

        emitTransfer(address(0), address(this), supplyToMint);

        // record minting event before mutation to token supply
        uint minterReward = _supplySchedule.recordMintEvent(supplyToMint);

        // Set minted SNX balance to RewardEscrow's balance
        // Minus the minterReward and set balance of minter to add reward
        uint amountToDistribute = supplyToMint.sub(minterReward);

        // Set the token balance to the RewardsDistribution contract
        tokenState.setBalanceOf(
            address(_rewardsDistribution),
            tokenState.balanceOf(address(_rewardsDistribution)).add(amountToDistribute)
        );
        emitTransfer(address(this), address(_rewardsDistribution), amountToDistribute);

        // Kick off the distribution of rewards
        _rewardsDistribution.distributeRewards(amountToDistribute);

        // Assign the minters reward.
        tokenState.setBalanceOf(msg.sender, tokenState.balanceOf(msg.sender).add(minterReward));
        emitTransfer(address(this), msg.sender, minterReward);

        // Increase total supply by minted amount
        totalSupply = totalSupply.add(supplyToMint);

        return true;
    }

    /* Once off function for SIP-60 to migrate SNX balances in the RewardEscrow contract
     * To the new RewardEscrowV2 contract
     */
    function migrateEscrowBalanceToRewardEscrowV2() external onlyOwner {
        // Record balanceOf(RewardEscrow) contract
        uint rewardEscrowBalance = tokenState.balanceOf(address(rewardEscrow()));

        // transfer all of RewardEscrow's balance to RewardEscrowV2
        // _internalTransfer emits the transfer event
        _internalTransfer(address(rewardEscrow()), address(rewardEscrowV2()), rewardEscrowBalance);
    }

    // ========== EVENTS ==========

    event AtomicSynthExchange(
        address indexed account,
        bytes32 fromCurrencyKey,
        uint256 fromAmount,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        address toAddress
    );
    bytes32 internal constant ATOMIC_SYNTH_EXCHANGE_SIG =
        keccak256("AtomicSynthExchange(address,bytes32,uint256,bytes32,uint256,address)");

    function emitAtomicSynthExchange(
        address account,
        bytes32 fromCurrencyKey,
        uint256 fromAmount,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        address toAddress
    ) external onlyExchanger {
        proxy._emit(
            abi.encode(fromCurrencyKey, fromAmount, toCurrencyKey, toAmount, toAddress),
            2,
            ATOMIC_SYNTH_EXCHANGE_SIG,
            addressToBytes32(account),
            0,
            0
        );
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./base/ModuleManager.sol";
import "./base/OwnerManager.sol";
import "./base/FallbackManager.sol";
import "./base/GuardManager.sol";
import "./common/EtherPaymentFallback.sol";
import "./common/Singleton.sol";
import "./common/SignatureDecoder.sol";
import "./common/SecuredTokenTransfer.sol";
import "./common/StorageAccessible.sol";
import "./interfaces/ISignatureValidator.sol";
import "./external/GnosisSafeMath.sol";
/// @title Gnosis Safe - A multisignature wallet with support for confirmations using signed messages based on ERC191.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafe is
    EtherPaymentFallback,
    Singleton,
    ModuleManager,
    OwnerManager,
    SignatureDecoder,
    SecuredTokenTransfer,
    ISignatureValidatorConstants,
    FallbackManager,
    StorageAccessible,
    GuardManager
{
    using GnosisSafeMath for uint256;
    string public constant VERSION = "1.3.0";
    // keccak256(
    //     "EIP712Domain(uint256 chainId,address verifyingContract)"
    // );
    bytes32 private constant DOMAIN_SEPARATOR_TYPEHASH = 0x47e79534a245952e8b16893a336b85a3d9ea9fa8c573f3d803afb92a79469218;
    // keccak256(
    //     "SafeTx(address to,uint256 value,bytes data,uint8 operation,uint256 safeTxGas,uint256 baseGas,uint256 gasPrice,address gasToken,address refundReceiver,uint256 nonce)"
    // );
    bytes32 private constant SAFE_TX_TYPEHASH = 0xbb8310d486368db6bd6f849402fdd73ad53d316b5a4b2644ad6efe0f941286d8;
    event SafeSetup(address indexed initiator, address[] owners, uint256 threshold, address initializer, address fallbackHandler);
    event ApproveHash(bytes32 indexed approvedHash, address indexed owner);
    event SignMsg(bytes32 indexed msgHash);
    event ExecutionFailure(bytes32 txHash, uint256 payment);
    event ExecutionSuccess(bytes32 txHash, uint256 payment);
    uint256 public nonce;
    bytes32 private _deprecatedDomainSeparator;
    // Mapping to keep track of all message hashes that have been approve by ALL REQUIRED owners
    mapping(bytes32 => uint256) public signedMessages;
    // Mapping to keep track of all hashes (message or transaction) that have been approve by ANY owners
    mapping(address => mapping(bytes32 => uint256)) public approvedHashes;
    // This constructor ensures that this contract can only be used as a master copy for Proxy contracts
    constructor() {
        // By setting the threshold it is not possible to call setup anymore,
        // so we create a Safe with 0 owners and threshold 1.
        // This is an unusable Safe, perfect for the singleton
        threshold = 1;
    }
    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    /// @param to Contract address for optional delegate call.
    /// @param data Data payload for optional delegate call.
    /// @param fallbackHandler Handler for fallback calls to this contract
    /// @param paymentToken Token that should be used for the payment (0 is ETH)
    /// @param payment Value that should be paid
    /// @param paymentReceiver Adddress that should receive the payment (or 0 if tx.origin)
    function setup(
        address[] calldata _owners,
        uint256 _threshold,
        address to,
        bytes calldata data,
        address fallbackHandler,
        address paymentToken,
        uint256 payment,
        address payable paymentReceiver
    ) external {
        // setupOwners checks if the Threshold is already set, therefore preventing that this method is called twice
        setupOwners(_owners, _threshold);
        if (fallbackHandler != address(0)) internalSetFallbackHandler(fallbackHandler);
        // As setupOwners can only be called if the contract has not been initialized we don't need a check for setupModules
        setupModules(to, data);
        if (payment > 0) {
            // To avoid running into issues with EIP-170 we reuse the handlePayment function (to avoid adjusting code of that has been verified we do not adjust the method itself)
            // baseGas = 0, gasPrice = 1 and gas = payment => amount = (payment + 0) * 1 = payment
            handlePayment(payment, 0, 1, paymentToken, paymentReceiver);
        }
        emit SafeSetup(msg.sender, _owners, _threshold, to, fallbackHandler);
    }
    /// @dev Allows to execute a Safe transaction confirmed by required number of owners and then pays the account that submitted the transaction.
    ///      Note: The fees are always transferred, even if the user transaction fails.
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @param safeTxGas Gas that should be used for the Safe transaction.
    /// @param baseGas Gas costs that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Gas price that should be used for the payment calculation.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param signatures Packed signature data ({bytes32 r}{bytes32 s}{uint8 v})
    function execTransaction(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures
    ) public payable virtual returns (bool success) {
        bytes32 txHash;
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            bytes memory txHashData =
                encodeTransactionData(
                    // Transaction info
                    to,
                    value,
                    data,
                    operation,
                    safeTxGas,
                    // Payment info
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    // Signature info
                    nonce
                );
            // Increase nonce and execute transaction.
            nonce++;
            txHash = keccak256(txHashData);
            checkSignatures(txHash, txHashData, signatures);
        }
        address guard = getGuard();
        {
            if (guard != address(0)) {
                Guard(guard).checkTransaction(
                    // Transaction info
                    to,
                    value,
                    data,
                    operation,
                    safeTxGas,
                    // Payment info
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    // Signature info
                    signatures,
                    msg.sender
                );
            }
        }
        // We require some gas to emit the events (at least 2500) after the execution and some to perform code until the execution (500)
        // We also include the 1/64 in the check that is not send along with a call to counteract potential shortings because of EIP-150
        require(gasleft() >= ((safeTxGas * 64) / 63).max(safeTxGas + 2500) + 500, "GS010");
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            uint256 gasUsed = gasleft();
            // If the gasPrice is 0 we assume that nearly all available gas can be used (it is always more than safeTxGas)
            // We only substract 2500 (compared to the 3000 before) to ensure that the amount passed is still higher than safeTxGas
            success = execute(to, value, data, operation, gasPrice == 0 ? (gasleft() - 2500) : safeTxGas);
            gasUsed = gasUsed.sub(gasleft());
            // If no safeTxGas and no gasPrice was set (e.g. both are 0), then the internal tx is required to be successful
            // This makes it possible to use `estimateGas` without issues, as it searches for the minimum gas where the tx doesn't revert
            require(success || safeTxGas != 0 || gasPrice != 0, "GS013");
            // We transfer the calculated tx costs to the tx.origin to avoid sending it to intermediate contracts that have made calls
            uint256 payment = 0;
            if (gasPrice > 0) {
                payment = handlePayment(gasUsed, baseGas, gasPrice, gasToken, refundReceiver);
            }
            if (success) emit ExecutionSuccess(txHash, payment);
            else emit ExecutionFailure(txHash, payment);
        }
        {
            if (guard != address(0)) {
                Guard(guard).checkAfterExecution(txHash, success);
            }
        }
    }
    function handlePayment(
        uint256 gasUsed,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver
    ) private returns (uint256 payment) {
        // solhint-disable-next-line avoid-tx-origin
        address payable receiver = refundReceiver == address(0) ? payable(tx.origin) : refundReceiver;
        if (gasToken == address(0)) {
            // For ETH we will only adjust the gas price to not be higher than the actual used gas price
            payment = gasUsed.add(baseGas).mul(gasPrice < tx.gasprice ? gasPrice : tx.gasprice);
            require(receiver.send(payment), "GS011");
        } else {
            payment = gasUsed.add(baseGas).mul(gasPrice);
            require(transferToken(gasToken, receiver, payment), "GS012");
        }
    }
    /**
     * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
     * @param dataHash Hash of the data (could be either a message hash or transaction hash)
     * @param data That should be signed (this is passed to an external validator contract)
     * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
     */
    function checkSignatures(
        bytes32 dataHash,
        bytes memory data,
        bytes memory signatures
    ) public view {
        // Load threshold to avoid multiple storage loads
        uint256 _threshold = threshold;
        // Check that a threshold is set
        require(_threshold > 0, "GS001");
        checkNSignatures(dataHash, data, signatures, _threshold);
    }
    /**
     * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
     * @param dataHash Hash of the data (could be either a message hash or transaction hash)
     * @param data That should be signed (this is passed to an external validator contract)
     * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
     * @param requiredSignatures Amount of required valid signatures.
     */
    function checkNSignatures(
        bytes32 dataHash,
        bytes memory data,
        bytes memory signatures,
        uint256 requiredSignatures
    ) public view {
        // Check that the provided signature data is not too short
        require(signatures.length >= requiredSignatures.mul(65), "GS020");
        // There cannot be an owner with address 0.
        address lastOwner = address(0);
        address currentOwner;
        uint8 v;
        bytes32 r;
        bytes32 s;
        uint256 i;
        for (i = 0; i < requiredSignatures; i++) {
            (v, r, s) = signatureSplit(signatures, i);
            if (v == 0) {
                // If v is 0 then it is a contract signature
                // When handling contract signatures the address of the contract is encoded into r
                currentOwner = address(uint160(uint256(r)));
                // Check that signature data pointer (s) is not pointing inside the static part of the signatures bytes
                // This check is not completely accurate, since it is possible that more signatures than the threshold are send.
                // Here we only check that the pointer is not pointing inside the part that is being processed
                require(uint256(s) >= requiredSignatures.mul(65), "GS021");
                // Check that signature data pointer (s) is in bounds (points to the length of data -> 32 bytes)
                require(uint256(s).add(32) <= signatures.length, "GS022");
                // Check if the contract signature is in bounds: start of data is s + 32 and end is start + signature length
                uint256 contractSignatureLen;
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    contractSignatureLen := mload(add(add(signatures, s), 0x20))
                }
                require(uint256(s).add(32).add(contractSignatureLen) <= signatures.length, "GS023");
                // Check signature
                bytes memory contractSignature;
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    // The signature data for contract signatures is appended to the concatenated signatures and the offset is stored in s
                    contractSignature := add(add(signatures, s), 0x20)
                }
                require(ISignatureValidator(currentOwner).isValidSignature(data, contractSignature) == EIP1271_MAGIC_VALUE, "GS024");
            } else if (v == 1) {
                // If v is 1 then it is an approved hash
                // When handling approved hashes the address of the approver is encoded into r
                currentOwner = address(uint160(uint256(r)));
                // Hashes are automatically approved by the sender of the message or when they have been pre-approved via a separate transaction
                require(msg.sender == currentOwner || approvedHashes[currentOwner][dataHash] != 0, "GS025");
            } else if (v > 30) {
                // If v > 30 then default va (27,28) has been adjusted for eth_sign flow
                // To support eth_sign and similar we adjust v and hash the messageHash with the Ethereum message prefix before applying ecrecover
                currentOwner = ecrecover(keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", dataHash)), v - 4, r, s);
            } else {
                // Default is the ecrecover flow with the provided data hash
                // Use ecrecover with the messageHash for EOA signatures
                currentOwner = ecrecover(dataHash, v, r, s);
            }
            require(currentOwner > lastOwner && owners[currentOwner] != address(0) && currentOwner != SENTINEL_OWNERS, "GS026");
            lastOwner = currentOwner;
        }
    }
    /// @dev Allows to estimate a Safe transaction.
    ///      This method is only meant for estimation purpose, therefore the call will always revert and encode the result in the revert data.
    ///      Since the `estimateGas` function includes refunds, call this method to get an estimated of the costs that are deducted from the safe with `execTransaction`
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @return Estimate without refunds and overhead fees (base transaction and payload data gas costs).
    /// @notice Deprecated in favor of common/StorageAccessible.sol and will be removed in next version.
    function requiredTxGas(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation
    ) external returns (uint256) {
        uint256 startGas = gasleft();
        // We don't provide an error message here, as we use it to return the estimate
        require(execute(to, value, data, operation, gasleft()));
        uint256 requiredGas = startGas - gasleft();
        // Convert response to string and return via error message
        revert(string(abi.encodePacked(requiredGas)));
    }
    /**
     * @dev Marks a hash as approved. This can be used to validate a hash that is used by a signature.
     * @param hashToApprove The hash that should be marked as approved for signatures that are verified by this contract.
     */
    function approveHash(bytes32 hashToApprove) external {
        require(owners[msg.sender] != address(0), "GS030");
        approvedHashes[msg.sender][hashToApprove] = 1;
        emit ApproveHash(hashToApprove, msg.sender);
    }
    /// @dev Returns the chain id used by this contract.
    function getChainId() public view returns (uint256) {
        uint256 id;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            id := chainid()
        }
        return id;
    }
    function domainSeparator() public view returns (bytes32) {
        return keccak256(abi.encode(DOMAIN_SEPARATOR_TYPEHASH, getChainId(), this));
    }
    /// @dev Returns the bytes that are hashed to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Gas that should be used for the safe transaction.
    /// @param baseGas Gas costs for that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash bytes.
    function encodeTransactionData(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    ) public view returns (bytes memory) {
        bytes32 safeTxHash =
            keccak256(
                abi.encode(
                    SAFE_TX_TYPEHASH,
                    to,
                    value,
                    keccak256(data),
                    operation,
                    safeTxGas,
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    _nonce
                )
            );
        return abi.encodePacked(bytes1(0x19), bytes1(0x01), domainSeparator(), safeTxHash);
    }
    /// @dev Returns hash to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Fas that should be used for the safe transaction.
    /// @param baseGas Gas costs for data used to trigger the safe transaction.
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash.
    function getTransactionHash(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    ) public view returns (bytes32) {
        return keccak256(encodeTransactionData(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, _nonce));
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
/// @title Executor - A contract that can execute transactions
/// @author Richard Meissner - <[email protected]>
contract Executor {
    function execute(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 txGas
    ) internal returns (bool success) {
        if (operation == Enum.Operation.DelegateCall) {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                success := delegatecall(txGas, to, add(data, 0x20), mload(data), 0, 0)
            }
        } else {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                success := call(txGas, to, value, add(data, 0x20), mload(data), 0, 0)
            }
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract FallbackManager is SelfAuthorized {
    event ChangedFallbackHandler(address handler);
    // keccak256("fallback_manager.handler.address")
    bytes32 internal constant FALLBACK_HANDLER_STORAGE_SLOT = 0x6c9a6c4a39284e37ed1cf53d337577d14212a4870fb976a4366c693b939918d5;
    function internalSetFallbackHandler(address handler) internal {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, handler)
        }
    }
    /// @dev Allows to add a contract to handle fallback calls.
    ///      Only fallback calls without value and with data will be forwarded.
    ///      This can only be done via a Safe transaction.
    /// @param handler contract to handle fallbacks calls.
    function setFallbackHandler(address handler) public authorized {
        internalSetFallbackHandler(handler);
        emit ChangedFallbackHandler(handler);
    }
    // solhint-disable-next-line payable-fallback,no-complex-fallback
    fallback() external {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let handler := sload(slot)
            if iszero(handler) {
                return(0, 0)
            }
            calldatacopy(0, 0, calldatasize())
            // The msg.sender address is shifted to the left by 12 bytes to remove the padding
            // Then the address without padding is stored right after the calldata
            mstore(calldatasize(), shl(96, caller()))
            // Add 20 bytes for the address appended add the end
            let success := call(gas(), handler, 0, 0, add(calldatasize(), 20), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if iszero(success) {
                revert(0, returndatasize())
            }
            return(0, returndatasize())
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
interface Guard {
    function checkTransaction(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures,
        address msgSender
    ) external;
    function checkAfterExecution(bytes32 txHash, bool success) external;
}
/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract GuardManager is SelfAuthorized {
    event ChangedGuard(address guard);
    // keccak256("guard_manager.guard.address")
    bytes32 internal constant GUARD_STORAGE_SLOT = 0x4a204f620c8c5ccdca3fd54d003badd85ba500436a431f0cbda4f558c93c34c8;
    /// @dev Set a guard that checks transactions before execution
    /// @param guard The address of the guard to be used or the 0 address to disable the guard
    function setGuard(address guard) external authorized {
        bytes32 slot = GUARD_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, guard)
        }
        emit ChangedGuard(guard);
    }
    function getGuard() internal view returns (address guard) {
        bytes32 slot = GUARD_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            guard := sload(slot)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
import "./Executor.sol";
/// @title Module Manager - A contract that manages modules that can execute transactions via this contract
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract ModuleManager is SelfAuthorized, Executor {
    event EnabledModule(address module);
    event DisabledModule(address module);
    event ExecutionFromModuleSuccess(address indexed module);
    event ExecutionFromModuleFailure(address indexed module);
    address internal constant SENTINEL_MODULES = address(0x1);
    mapping(address => address) internal modules;
    function setupModules(address to, bytes memory data) internal {
        require(modules[SENTINEL_MODULES] == address(0), "GS100");
        modules[SENTINEL_MODULES] = SENTINEL_MODULES;
        if (to != address(0))
            // Setup has to complete successfully or transaction fails.
            require(execute(to, 0, data, Enum.Operation.DelegateCall, gasleft()), "GS000");
    }
    /// @dev Allows to add a module to the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @notice Enables the module `module` for the Safe.
    /// @param module Module to be whitelisted.
    function enableModule(address module) public authorized {
        // Module address cannot be null or sentinel.
        require(module != address(0) && module != SENTINEL_MODULES, "GS101");
        // Module cannot be added twice.
        require(modules[module] == address(0), "GS102");
        modules[module] = modules[SENTINEL_MODULES];
        modules[SENTINEL_MODULES] = module;
        emit EnabledModule(module);
    }
    /// @dev Allows to remove a module from the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @notice Disables the module `module` for the Safe.
    /// @param prevModule Module that pointed to the module to be removed in the linked list
    /// @param module Module to be removed.
    function disableModule(address prevModule, address module) public authorized {
        // Validate module address and check that it corresponds to module index.
        require(module != address(0) && module != SENTINEL_MODULES, "GS101");
        require(modules[prevModule] == module, "GS103");
        modules[prevModule] = modules[module];
        modules[module] = address(0);
        emit DisabledModule(module);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations.
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModule(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public virtual returns (bool success) {
        // Only whitelisted modules are allowed.
        require(msg.sender != SENTINEL_MODULES && modules[msg.sender] != address(0), "GS104");
        // Execute transaction without further confirmations.
        success = execute(to, value, data, operation, gasleft());
        if (success) emit ExecutionFromModuleSuccess(msg.sender);
        else emit ExecutionFromModuleFailure(msg.sender);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations and return data
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModuleReturnData(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public returns (bool success, bytes memory returnData) {
        success = execTransactionFromModule(to, value, data, operation);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Load free memory location
            let ptr := mload(0x40)
            // We allocate memory for the return data by setting the free memory location to
            // current free memory location + data size + 32 bytes for data size value
            mstore(0x40, add(ptr, add(returndatasize(), 0x20)))
            // Store the size
            mstore(ptr, returndatasize())
            // Store the data
            returndatacopy(add(ptr, 0x20), 0, returndatasize())
            // Point the return data to the correct memory location
            returnData := ptr
        }
    }
    /// @dev Returns if an module is enabled
    /// @return True if the module is enabled
    function isModuleEnabled(address module) public view returns (bool) {
        return SENTINEL_MODULES != module && modules[module] != address(0);
    }
    /// @dev Returns array of modules.
    /// @param start Start of the page.
    /// @param pageSize Maximum number of modules that should be returned.
    /// @return array Array of modules.
    /// @return next Start of the next page.
    function getModulesPaginated(address start, uint256 pageSize) external view returns (address[] memory array, address next) {
        // Init array with max page size
        array = new address[](pageSize);
        // Populate return array
        uint256 moduleCount = 0;
        address currentModule = modules[start];
        while (currentModule != address(0x0) && currentModule != SENTINEL_MODULES && moduleCount < pageSize) {
            array[moduleCount] = currentModule;
            currentModule = modules[currentModule];
            moduleCount++;
        }
        next = currentModule;
        // Set correct size of returned array
        // solhint-disable-next-line no-inline-assembly
        assembly {
            mstore(array, moduleCount)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/// @title OwnerManager - Manages a set of owners and a threshold to perform actions.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract OwnerManager is SelfAuthorized {
    event AddedOwner(address owner);
    event RemovedOwner(address owner);
    event ChangedThreshold(uint256 threshold);
    address internal constant SENTINEL_OWNERS = address(0x1);
    mapping(address => address) internal owners;
    uint256 internal ownerCount;
    uint256 internal threshold;
    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    function setupOwners(address[] memory _owners, uint256 _threshold) internal {
        // Threshold can only be 0 at initialization.
        // Check ensures that setup function can only be called once.
        require(threshold == 0, "GS200");
        // Validate that threshold is smaller than number of added owners.
        require(_threshold <= _owners.length, "GS201");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "GS202");
        // Initializing Safe owners.
        address currentOwner = SENTINEL_OWNERS;
        for (uint256 i = 0; i < _owners.length; i++) {
            // Owner address cannot be null.
            address owner = _owners[i];
            require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this) && currentOwner != owner, "GS203");
            // No duplicate owners allowed.
            require(owners[owner] == address(0), "GS204");
            owners[currentOwner] = owner;
            currentOwner = owner;
        }
        owners[currentOwner] = SENTINEL_OWNERS;
        ownerCount = _owners.length;
        threshold = _threshold;
    }
    /// @dev Allows to add a new owner to the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @notice Adds the owner `owner` to the Safe and updates the threshold to `_threshold`.
    /// @param owner New owner address.
    /// @param _threshold New threshold.
    function addOwnerWithThreshold(address owner, uint256 _threshold) public authorized {
        // Owner address cannot be null, the sentinel or the Safe itself.
        require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this), "GS203");
        // No duplicate owners allowed.
        require(owners[owner] == address(0), "GS204");
        owners[owner] = owners[SENTINEL_OWNERS];
        owners[SENTINEL_OWNERS] = owner;
        ownerCount++;
        emit AddedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold) changeThreshold(_threshold);
    }
    /// @dev Allows to remove an owner from the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @notice Removes the owner `owner` from the Safe and updates the threshold to `_threshold`.
    /// @param prevOwner Owner that pointed to the owner to be removed in the linked list
    /// @param owner Owner address to be removed.
    /// @param _threshold New threshold.
    function removeOwner(
        address prevOwner,
        address owner,
        uint256 _threshold
    ) public authorized {
        // Only allow to remove an owner, if threshold can still be reached.
        require(ownerCount - 1 >= _threshold, "GS201");
        // Validate owner address and check that it corresponds to owner index.
        require(owner != address(0) && owner != SENTINEL_OWNERS, "GS203");
        require(owners[prevOwner] == owner, "GS205");
        owners[prevOwner] = owners[owner];
        owners[owner] = address(0);
        ownerCount--;
        emit RemovedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold) changeThreshold(_threshold);
    }
    /// @dev Allows to swap/replace an owner from the Safe with another address.
    ///      This can only be done via a Safe transaction.
    /// @notice Replaces the owner `oldOwner` in the Safe with `newOwner`.
    /// @param prevOwner Owner that pointed to the owner to be replaced in the linked list
    /// @param oldOwner Owner address to be replaced.
    /// @param newOwner New owner address.
    function swapOwner(
        address prevOwner,
        address oldOwner,
        address newOwner
    ) public authorized {
        // Owner address cannot be null, the sentinel or the Safe itself.
        require(newOwner != address(0) && newOwner != SENTINEL_OWNERS && newOwner != address(this), "GS203");
        // No duplicate owners allowed.
        require(owners[newOwner] == address(0), "GS204");
        // Validate oldOwner address and check that it corresponds to owner index.
        require(oldOwner != address(0) && oldOwner != SENTINEL_OWNERS, "GS203");
        require(owners[prevOwner] == oldOwner, "GS205");
        owners[newOwner] = owners[oldOwner];
        owners[prevOwner] = newOwner;
        owners[oldOwner] = address(0);
        emit RemovedOwner(oldOwner);
        emit AddedOwner(newOwner);
    }
    /// @dev Allows to update the number of required confirmations by Safe owners.
    ///      This can only be done via a Safe transaction.
    /// @notice Changes the threshold of the Safe to `_threshold`.
    /// @param _threshold New threshold.
    function changeThreshold(uint256 _threshold) public authorized {
        // Validate that threshold is smaller than number of owners.
        require(_threshold <= ownerCount, "GS201");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "GS202");
        threshold = _threshold;
        emit ChangedThreshold(threshold);
    }
    function getThreshold() public view returns (uint256) {
        return threshold;
    }
    function isOwner(address owner) public view returns (bool) {
        return owner != SENTINEL_OWNERS && owners[owner] != address(0);
    }
    /// @dev Returns array of owners.
    /// @return Array of Safe owners.
    function getOwners() public view returns (address[] memory) {
        address[] memory array = new address[](ownerCount);
        // populate return array
        uint256 index = 0;
        address currentOwner = owners[SENTINEL_OWNERS];
        while (currentOwner != SENTINEL_OWNERS) {
            array[index] = currentOwner;
            currentOwner = owners[currentOwner];
            index++;
        }
        return array;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title Enum - Collection of enums
/// @author Richard Meissner - <[email protected]>
contract Enum {
    enum Operation {Call, DelegateCall}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title EtherPaymentFallback - A contract that has a fallback to accept ether payments
/// @author Richard Meissner - <[email protected]>
contract EtherPaymentFallback {
    event SafeReceived(address indexed sender, uint256 value);
    /// @dev Fallback function accepts Ether transactions.
    receive() external payable {
        emit SafeReceived(msg.sender, msg.value);
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SecuredTokenTransfer - Secure token transfer
/// @author Richard Meissner - <[email protected]>
contract SecuredTokenTransfer {
    /// @dev Transfers a token and returns if it was a success
    /// @param token Token that should be transferred
    /// @param receiver Receiver to whom the token should be transferred
    /// @param amount The amount of tokens that should be transferred
    function transferToken(
        address token,
        address receiver,
        uint256 amount
    ) internal returns (bool transferred) {
        // 0xa9059cbb - keccack("transfer(address,uint256)")
        bytes memory data = abi.encodeWithSelector(0xa9059cbb, receiver, amount);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // We write the return value to scratch space.
            // See https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory
            let success := call(sub(gas(), 10000), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            switch returndatasize()
                case 0 {
                    transferred := success
                }
                case 0x20 {
                    transferred := iszero(or(iszero(success), iszero(mload(0))))
                }
                default {
                    transferred := 0
                }
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SelfAuthorized - authorizes current contract to perform actions
/// @author Richard Meissner - <[email protected]>
contract SelfAuthorized {
    function requireSelfCall() private view {
        require(msg.sender == address(this), "GS031");
    }
    modifier authorized() {
        // This is a function call as it minimized the bytecode size
        requireSelfCall();
        _;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SignatureDecoder - Decodes signatures that a encoded as bytes
/// @author Richard Meissner - <[email protected]>
contract SignatureDecoder {
    /// @dev divides bytes signature into `uint8 v, bytes32 r, bytes32 s`.
    /// @notice Make sure to peform a bounds check for @param pos, to avoid out of bounds access on @param signatures
    /// @param pos which signature to read. A prior bounds check of this parameter should be performed, to avoid out of bounds access
    /// @param signatures concatenated rsv signatures
    function signatureSplit(bytes memory signatures, uint256 pos)
        internal
        pure
        returns (
            uint8 v,
            bytes32 r,
            bytes32 s
        )
    {
        // The signature format is a compact form of:
        //   {bytes32 r}{bytes32 s}{uint8 v}
        // Compact means, uint8 is not padded to 32 bytes.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let signaturePos := mul(0x41, pos)
            r := mload(add(signatures, add(signaturePos, 0x20)))
            s := mload(add(signatures, add(signaturePos, 0x40)))
            // Here we are loading the last 32 bytes, including 31 bytes
            // of 's'. There is no 'mload8' to do this.
            //
            // 'byte' is not working due to the Solidity parser, so lets
            // use the second best option, 'and'
            v := and(mload(add(signatures, add(signaturePos, 0x41))), 0xff)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title Singleton - Base for singleton contracts (should always be first super contract)
///         This contract is tightly coupled to our proxy contract (see `proxies/GnosisSafeProxy.sol`)
/// @author Richard Meissner - <[email protected]>
contract Singleton {
    // singleton always needs to be first declared variable, to ensure that it is at the same location as in the Proxy contract.
    // It should also always be ensured that the address is stored alone (uses a full word)
    address private singleton;
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title StorageAccessible - generic base contract that allows callers to access all internal storage.
/// @notice See https://github.com/gnosis/util-contracts/blob/bb5fe5fb5df6d8400998094fb1b32a178a47c3a1/contracts/StorageAccessible.sol
contract StorageAccessible {
    /**
     * @dev Reads `length` bytes of storage in the currents contract
     * @param offset - the offset in the current contract's storage in words to start reading from
     * @param length - the number of words (32 bytes) of data to read
     * @return the bytes that were read.
     */
    function getStorageAt(uint256 offset, uint256 length) public view returns (bytes memory) {
        bytes memory result = new bytes(length * 32);
        for (uint256 index = 0; index < length; index++) {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                let word := sload(add(offset, index))
                mstore(add(add(result, 0x20), mul(index, 0x20)), word)
            }
        }
        return result;
    }
    /**
     * @dev Performs a delegetecall on a targetContract in the context of self.
     * Internally reverts execution to avoid side effects (making it static).
     *
     * This method reverts with data equal to `abi.encode(bool(success), bytes(response))`.
     * Specifically, the `returndata` after a call to this method will be:
     * `success:bool || response.length:uint256 || response:bytes`.
     *
     * @param targetContract Address of the contract containing the code to execute.
     * @param calldataPayload Calldata that should be sent to the target contract (encoded method name and arguments).
     */
    function simulateAndRevert(address targetContract, bytes memory calldataPayload) external {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let success := delegatecall(gas(), targetContract, add(calldataPayload, 0x20), mload(calldataPayload), 0, 0)
            mstore(0x00, success)
            mstore(0x20, returndatasize())
            returndatacopy(0x40, 0, returndatasize())
            revert(0, add(returndatasize(), 0x40))
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
 * @title GnosisSafeMath
 * @dev Math operations with safety checks that revert on error
 * Renamed from SafeMath to GnosisSafeMath to avoid conflicts
 * TODO: remove once open zeppelin update to solc 0.5.0
 */
library GnosisSafeMath {
    /**
     * @dev Multiplies two numbers, reverts on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b);
        return c;
    }
    /**
     * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Adds two numbers, reverts on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);
        return c;
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
contract ISignatureValidatorConstants {
    // bytes4(keccak256("isValidSignature(bytes,bytes)")
    bytes4 internal constant EIP1271_MAGIC_VALUE = 0x20c13b0b;
}
abstract contract ISignatureValidator is ISignatureValidatorConstants {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param _data Arbitrary length data signed on the behalf of address(this)
     * @param _signature Signature byte array associated with _data
     *
     * MUST return the bytes4 magic value 0x20c13b0b when function passes.
     * MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
     * MUST allow external calls
     */
    function isValidSignature(bytes memory _data, bytes memory _signature) public view virtual returns (bytes4);
}

/*
-----------------------------------------------------------------
FILE HEADER
-----------------------------------------------------------------

file:       TokenState.sol
version:    1.0
author:     Dominic Romanowski
            Anton Jurisevic

date:       2018-2-24
checked:    Anton Jurisevic
approved:   Samuel Brooks

repo:       https://github.com/Havven/havven
commit:     34e66009b98aa18976226c139270970d105045e3

-----------------------------------------------------------------
CONTRACT DESCRIPTION
-----------------------------------------------------------------

An Owned contract, to be inherited by other contracts.
Requires its owner to be explicitly set in the constructor.
Provides an onlyOwner access modifier.

To change owner, the current owner must nominate the next owner,
who then has to accept the nomination. The nomination can be
cancelled before it is accepted by the new owner by having the
previous owner change the nomination (setting it to 0).
-----------------------------------------------------------------
*/

pragma solidity ^0.4.20;

contract Owned {
    address public owner;
    address public nominatedOwner;

    function Owned(address _owner)
        public
    {
        owner = _owner;
    }

    function nominateOwner(address _owner)
        external
        onlyOwner
    {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership()
        external
    {
        require(msg.sender == nominatedOwner);
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner
    {
        require(msg.sender == owner);
        _;
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}

/*
-----------------------------------------------------------------
CONTRACT DESCRIPTION
-----------------------------------------------------------------

A contract that holds the state of an ERC20 compliant token.

This contract is used side by side with external state token
contracts, such as Havven and EtherNomin.
It provides an easy way to upgrade contract logic while
maintaining all user balances and allowances. This is designed
to to make the changeover as easy as possible, since mappings
are not so cheap or straightforward to migrate.

The first deployed contract would create this state contract,
using it as its store of balances.
When a new contract is deployed, it links to the existing
state contract, whose owner would then change its associated
contract to the new one.

-----------------------------------------------------------------
*/

contract TokenState is Owned {

    // the address of the contract that can modify balances and allowances
    // this can only be changed by the owner of this contract
    address public associatedContract;

    // ERC20 fields.
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint256)) public allowance;

    function TokenState(address _owner, address _associatedContract)
        Owned(_owner)
        public
    {
        associatedContract = _associatedContract;
        emit AssociatedContractUpdated(_associatedContract);
    }

    /* ========== SETTERS ========== */

    // Change the associated contract to a new address
    function setAssociatedContract(address _associatedContract)
        external
        onlyOwner
    {
        associatedContract = _associatedContract;
        emit AssociatedContractUpdated(_associatedContract);
    }

    function setAllowance(address tokenOwner, address spender, uint value)
        external
        onlyAssociatedContract
    {
        allowance[tokenOwner][spender] = value;
    }

    function setBalanceOf(address account, uint value)
        external
        onlyAssociatedContract
    {
        balanceOf[account] = value;
    }


    /* ========== MODIFIERS ========== */

    modifier onlyAssociatedContract
    {
        require(msg.sender == associatedContract);
        _;
    }

    /* ========== EVENTS ========== */

    event AssociatedContractUpdated(address _associatedContract);
}

/*
MIT License

Copyright (c) 2018 Havven

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
*/

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: SystemStatus.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/SystemStatus.sol
* Docs: https://docs.synthetix.io/contracts/SystemStatus
*
* Contract Dependencies: 
*	- ISystemStatus
*	- Owned
* Libraries: (none)
*
* MIT License
* ===========
*
* Copyright (c) 2022 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/



pragma solidity ^0.5.16;

// https://docs.synthetix.io/contracts/source/contracts/owned
contract Owned {
    address public owner;
    address public nominatedOwner;

    constructor(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


// https://docs.synthetix.io/contracts/source/interfaces/isystemstatus
interface ISystemStatus {
    struct Status {
        bool canSuspend;
        bool canResume;
    }

    struct Suspension {
        bool suspended;
        // reason is an integer code,
        // 0 => no reason, 1 => upgrading, 2+ => defined by system usage
        uint248 reason;
    }

    // Views
    function accessControl(bytes32 section, address account) external view returns (bool canSuspend, bool canResume);

    function requireSystemActive() external view;

    function systemSuspended() external view returns (bool);

    function requireIssuanceActive() external view;

    function requireExchangeActive() external view;

    function requireFuturesActive() external view;

    function requireFuturesMarketActive(bytes32 marketKey) external view;

    function requireExchangeBetweenSynthsAllowed(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view;

    function requireSynthActive(bytes32 currencyKey) external view;

    function synthSuspended(bytes32 currencyKey) external view returns (bool);

    function requireSynthsActive(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view;

    function systemSuspension() external view returns (bool suspended, uint248 reason);

    function issuanceSuspension() external view returns (bool suspended, uint248 reason);

    function exchangeSuspension() external view returns (bool suspended, uint248 reason);

    function futuresSuspension() external view returns (bool suspended, uint248 reason);

    function synthExchangeSuspension(bytes32 currencyKey) external view returns (bool suspended, uint248 reason);

    function synthSuspension(bytes32 currencyKey) external view returns (bool suspended, uint248 reason);

    function futuresMarketSuspension(bytes32 marketKey) external view returns (bool suspended, uint248 reason);

    function getSynthExchangeSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory exchangeSuspensions, uint256[] memory reasons);

    function getSynthSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons);

    function getFuturesMarketSuspensions(bytes32[] calldata marketKeys)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons);

    // Restricted functions
    function suspendIssuance(uint256 reason) external;

    function suspendSynth(bytes32 currencyKey, uint256 reason) external;

    function suspendFuturesMarket(bytes32 marketKey, uint256 reason) external;

    function updateAccessControl(
        bytes32 section,
        address account,
        bool canSuspend,
        bool canResume
    ) external;
}


// Inheritance


// https://docs.synthetix.io/contracts/source/contracts/systemstatus
contract SystemStatus is Owned, ISystemStatus {
    mapping(bytes32 => mapping(address => Status)) public accessControl;

    uint248 public constant SUSPENSION_REASON_UPGRADE = 1;

    bytes32 public constant SECTION_SYSTEM = "System";
    bytes32 public constant SECTION_ISSUANCE = "Issuance";
    bytes32 public constant SECTION_EXCHANGE = "Exchange";
    bytes32 public constant SECTION_FUTURES = "Futures";
    bytes32 public constant SECTION_SYNTH_EXCHANGE = "SynthExchange";
    bytes32 public constant SECTION_SYNTH = "Synth";

    bytes32 public constant CONTRACT_NAME = "SystemStatus";

    Suspension public systemSuspension;

    Suspension public issuanceSuspension;

    Suspension public exchangeSuspension;

    Suspension public futuresSuspension;

    mapping(bytes32 => Suspension) public synthExchangeSuspension;

    mapping(bytes32 => Suspension) public synthSuspension;

    mapping(bytes32 => Suspension) public futuresMarketSuspension;

    constructor(address _owner) public Owned(_owner) {}

    /* ========== VIEWS ========== */
    function requireSystemActive() external view {
        _internalRequireSystemActive();
    }

    function systemSuspended() external view returns (bool) {
        return systemSuspension.suspended;
    }

    function requireIssuanceActive() external view {
        // Issuance requires the system be active
        _internalRequireSystemActive();

        // and issuance itself of course
        _internalRequireIssuanceActive();
    }

    function requireExchangeActive() external view {
        // Exchanging requires the system be active
        _internalRequireSystemActive();

        // and exchanging itself of course
        _internalRequireExchangeActive();
    }

    function requireSynthExchangeActive(bytes32 currencyKey) external view {
        // Synth exchange and transfer requires the system be active
        _internalRequireSystemActive();
        _internalRequireSynthExchangeActive(currencyKey);
    }

    function requireFuturesActive() external view {
        _internalRequireSystemActive();
        _internalRequireExchangeActive();
        _internalRequireFuturesActive();
    }

    /// @notice marketKey doesn't necessarily correspond to asset key
    function requireFuturesMarketActive(bytes32 marketKey) external view {
        _internalRequireSystemActive();
        _internalRequireExchangeActive(); // exchanging implicitely used
        _internalRequireFuturesActive(); // futures global flag
        _internalRequireFuturesMarketActive(marketKey); // specific futures market flag
    }

    function synthSuspended(bytes32 currencyKey) external view returns (bool) {
        return systemSuspension.suspended || synthSuspension[currencyKey].suspended;
    }

    function requireSynthActive(bytes32 currencyKey) external view {
        // Synth exchange and transfer requires the system be active
        _internalRequireSystemActive();
        _internalRequireSynthActive(currencyKey);
    }

    function requireSynthsActive(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view {
        // Synth exchange and transfer requires the system be active
        _internalRequireSystemActive();
        _internalRequireSynthActive(sourceCurrencyKey);
        _internalRequireSynthActive(destinationCurrencyKey);
    }

    function requireExchangeBetweenSynthsAllowed(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view {
        // Synth exchange and transfer requires the system be active
        _internalRequireSystemActive();

        // and exchanging must be active
        _internalRequireExchangeActive();

        // and the synth exchanging between the synths must be active
        _internalRequireSynthExchangeActive(sourceCurrencyKey);
        _internalRequireSynthExchangeActive(destinationCurrencyKey);

        // and finally, the synths cannot be suspended
        _internalRequireSynthActive(sourceCurrencyKey);
        _internalRequireSynthActive(destinationCurrencyKey);
    }

    function isSystemUpgrading() external view returns (bool) {
        return systemSuspension.suspended && systemSuspension.reason == SUSPENSION_REASON_UPGRADE;
    }

    function getSynthExchangeSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory exchangeSuspensions, uint256[] memory reasons)
    {
        exchangeSuspensions = new bool[](synths.length);
        reasons = new uint256[](synths.length);

        for (uint i = 0; i < synths.length; i++) {
            exchangeSuspensions[i] = synthExchangeSuspension[synths[i]].suspended;
            reasons[i] = synthExchangeSuspension[synths[i]].reason;
        }
    }

    function getSynthSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons)
    {
        suspensions = new bool[](synths.length);
        reasons = new uint256[](synths.length);

        for (uint i = 0; i < synths.length; i++) {
            suspensions[i] = synthSuspension[synths[i]].suspended;
            reasons[i] = synthSuspension[synths[i]].reason;
        }
    }

    /// @notice marketKey doesn't necessarily correspond to asset key
    function getFuturesMarketSuspensions(bytes32[] calldata marketKeys)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons)
    {
        suspensions = new bool[](marketKeys.length);
        reasons = new uint256[](marketKeys.length);

        for (uint i = 0; i < marketKeys.length; i++) {
            suspensions[i] = futuresMarketSuspension[marketKeys[i]].suspended;
            reasons[i] = futuresMarketSuspension[marketKeys[i]].reason;
        }
    }

    /* ========== MUTATIVE FUNCTIONS ========== */
    function updateAccessControl(
        bytes32 section,
        address account,
        bool canSuspend,
        bool canResume
    ) external onlyOwner {
        _internalUpdateAccessControl(section, account, canSuspend, canResume);
    }

    function updateAccessControls(
        bytes32[] calldata sections,
        address[] calldata accounts,
        bool[] calldata canSuspends,
        bool[] calldata canResumes
    ) external onlyOwner {
        require(
            sections.length == accounts.length &&
                accounts.length == canSuspends.length &&
                canSuspends.length == canResumes.length,
            "Input array lengths must match"
        );
        for (uint i = 0; i < sections.length; i++) {
            _internalUpdateAccessControl(sections[i], accounts[i], canSuspends[i], canResumes[i]);
        }
    }

    function suspendSystem(uint256 reason) external {
        _requireAccessToSuspend(SECTION_SYSTEM);
        systemSuspension.suspended = true;
        systemSuspension.reason = uint248(reason);
        emit SystemSuspended(systemSuspension.reason);
    }

    function resumeSystem() external {
        _requireAccessToResume(SECTION_SYSTEM);
        systemSuspension.suspended = false;
        emit SystemResumed(uint256(systemSuspension.reason));
        systemSuspension.reason = 0;
    }

    function suspendIssuance(uint256 reason) external {
        _requireAccessToSuspend(SECTION_ISSUANCE);
        issuanceSuspension.suspended = true;
        issuanceSuspension.reason = uint248(reason);
        emit IssuanceSuspended(reason);
    }

    function resumeIssuance() external {
        _requireAccessToResume(SECTION_ISSUANCE);
        issuanceSuspension.suspended = false;
        emit IssuanceResumed(uint256(issuanceSuspension.reason));
        issuanceSuspension.reason = 0;
    }

    function suspendExchange(uint256 reason) external {
        _requireAccessToSuspend(SECTION_EXCHANGE);
        exchangeSuspension.suspended = true;
        exchangeSuspension.reason = uint248(reason);
        emit ExchangeSuspended(reason);
    }

    function resumeExchange() external {
        _requireAccessToResume(SECTION_EXCHANGE);
        exchangeSuspension.suspended = false;
        emit ExchangeResumed(uint256(exchangeSuspension.reason));
        exchangeSuspension.reason = 0;
    }

    function suspendFutures(uint256 reason) external {
        _requireAccessToSuspend(SECTION_FUTURES);
        futuresSuspension.suspended = true;
        futuresSuspension.reason = uint248(reason);
        emit FuturesSuspended(reason);
    }

    function resumeFutures() external {
        _requireAccessToResume(SECTION_FUTURES);
        futuresSuspension.suspended = false;
        emit FuturesResumed(uint256(futuresSuspension.reason));
        futuresSuspension.reason = 0;
    }

    /// @notice marketKey doesn't necessarily correspond to asset key
    function suspendFuturesMarket(bytes32 marketKey, uint256 reason) external {
        bytes32[] memory marketKeys = new bytes32[](1);
        marketKeys[0] = marketKey;
        _internalSuspendFuturesMarkets(marketKeys, reason);
    }

    /// @notice marketKey doesn't necessarily correspond to asset key
    function suspendFuturesMarkets(bytes32[] calldata marketKeys, uint256 reason) external {
        _internalSuspendFuturesMarkets(marketKeys, reason);
    }

    /// @notice marketKey doesn't necessarily correspond to asset key
    function resumeFuturesMarket(bytes32 marketKey) external {
        bytes32[] memory marketKeys = new bytes32[](1);
        marketKeys[0] = marketKey;
        _internalResumeFuturesMarkets(marketKeys);
    }

    /// @notice marketKey doesn't necessarily correspond to asset key
    function resumeFuturesMarkets(bytes32[] calldata marketKeys) external {
        _internalResumeFuturesMarkets(marketKeys);
    }

    function suspendSynthExchange(bytes32 currencyKey, uint256 reason) external {
        bytes32[] memory currencyKeys = new bytes32[](1);
        currencyKeys[0] = currencyKey;
        _internalSuspendSynthExchange(currencyKeys, reason);
    }

    function suspendSynthsExchange(bytes32[] calldata currencyKeys, uint256 reason) external {
        _internalSuspendSynthExchange(currencyKeys, reason);
    }

    function resumeSynthExchange(bytes32 currencyKey) external {
        bytes32[] memory currencyKeys = new bytes32[](1);
        currencyKeys[0] = currencyKey;
        _internalResumeSynthsExchange(currencyKeys);
    }

    function resumeSynthsExchange(bytes32[] calldata currencyKeys) external {
        _internalResumeSynthsExchange(currencyKeys);
    }

    function suspendSynth(bytes32 currencyKey, uint256 reason) external {
        bytes32[] memory currencyKeys = new bytes32[](1);
        currencyKeys[0] = currencyKey;
        _internalSuspendSynths(currencyKeys, reason);
    }

    function suspendSynths(bytes32[] calldata currencyKeys, uint256 reason) external {
        _internalSuspendSynths(currencyKeys, reason);
    }

    function resumeSynth(bytes32 currencyKey) external {
        bytes32[] memory currencyKeys = new bytes32[](1);
        currencyKeys[0] = currencyKey;
        _internalResumeSynths(currencyKeys);
    }

    function resumeSynths(bytes32[] calldata currencyKeys) external {
        _internalResumeSynths(currencyKeys);
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function _requireAccessToSuspend(bytes32 section) internal view {
        require(accessControl[section][msg.sender].canSuspend, "Restricted to access control list");
    }

    function _requireAccessToResume(bytes32 section) internal view {
        require(accessControl[section][msg.sender].canResume, "Restricted to access control list");
    }

    function _internalRequireSystemActive() internal view {
        require(
            !systemSuspension.suspended,
            systemSuspension.reason == SUSPENSION_REASON_UPGRADE
                ? "Synthetix is suspended, upgrade in progress... please stand by"
                : "Synthetix is suspended. Operation prohibited"
        );
    }

    function _internalRequireIssuanceActive() internal view {
        require(!issuanceSuspension.suspended, "Issuance is suspended. Operation prohibited");
    }

    function _internalRequireExchangeActive() internal view {
        require(!exchangeSuspension.suspended, "Exchange is suspended. Operation prohibited");
    }

    function _internalRequireFuturesActive() internal view {
        require(!futuresSuspension.suspended, "Futures markets are suspended. Operation prohibited");
    }

    function _internalRequireSynthExchangeActive(bytes32 currencyKey) internal view {
        require(!synthExchangeSuspension[currencyKey].suspended, "Synth exchange suspended. Operation prohibited");
    }

    function _internalRequireSynthActive(bytes32 currencyKey) internal view {
        require(!synthSuspension[currencyKey].suspended, "Synth is suspended. Operation prohibited");
    }

    function _internalRequireFuturesMarketActive(bytes32 marketKey) internal view {
        require(!futuresMarketSuspension[marketKey].suspended, "Market suspended");
    }

    function _internalSuspendSynths(bytes32[] memory currencyKeys, uint256 reason) internal {
        _requireAccessToSuspend(SECTION_SYNTH);
        for (uint i = 0; i < currencyKeys.length; i++) {
            bytes32 currencyKey = currencyKeys[i];
            synthSuspension[currencyKey].suspended = true;
            synthSuspension[currencyKey].reason = uint248(reason);
            emit SynthSuspended(currencyKey, reason);
        }
    }

    function _internalResumeSynths(bytes32[] memory currencyKeys) internal {
        _requireAccessToResume(SECTION_SYNTH);
        for (uint i = 0; i < currencyKeys.length; i++) {
            bytes32 currencyKey = currencyKeys[i];
            emit SynthResumed(currencyKey, uint256(synthSuspension[currencyKey].reason));
            delete synthSuspension[currencyKey];
        }
    }

    function _internalSuspendSynthExchange(bytes32[] memory currencyKeys, uint256 reason) internal {
        _requireAccessToSuspend(SECTION_SYNTH_EXCHANGE);
        for (uint i = 0; i < currencyKeys.length; i++) {
            bytes32 currencyKey = currencyKeys[i];
            synthExchangeSuspension[currencyKey].suspended = true;
            synthExchangeSuspension[currencyKey].reason = uint248(reason);
            emit SynthExchangeSuspended(currencyKey, reason);
        }
    }

    function _internalResumeSynthsExchange(bytes32[] memory currencyKeys) internal {
        _requireAccessToResume(SECTION_SYNTH_EXCHANGE);
        for (uint i = 0; i < currencyKeys.length; i++) {
            bytes32 currencyKey = currencyKeys[i];
            emit SynthExchangeResumed(currencyKey, uint256(synthExchangeSuspension[currencyKey].reason));
            delete synthExchangeSuspension[currencyKey];
        }
    }

    function _internalSuspendFuturesMarkets(bytes32[] memory marketKeys, uint256 reason) internal {
        _requireAccessToSuspend(SECTION_FUTURES);
        for (uint i = 0; i < marketKeys.length; i++) {
            bytes32 marketKey = marketKeys[i];
            futuresMarketSuspension[marketKey].suspended = true;
            futuresMarketSuspension[marketKey].reason = uint248(reason);
            emit FuturesMarketSuspended(marketKey, reason);
        }
    }

    function _internalResumeFuturesMarkets(bytes32[] memory marketKeys) internal {
        _requireAccessToResume(SECTION_FUTURES);
        for (uint i = 0; i < marketKeys.length; i++) {
            bytes32 marketKey = marketKeys[i];
            emit FuturesMarketResumed(marketKey, uint256(futuresMarketSuspension[marketKey].reason));
            delete futuresMarketSuspension[marketKey];
        }
    }

    function _internalUpdateAccessControl(
        bytes32 section,
        address account,
        bool canSuspend,
        bool canResume
    ) internal {
        require(
            section == SECTION_SYSTEM ||
                section == SECTION_ISSUANCE ||
                section == SECTION_EXCHANGE ||
                section == SECTION_FUTURES ||
                section == SECTION_SYNTH_EXCHANGE ||
                section == SECTION_SYNTH,
            "Invalid section supplied"
        );
        accessControl[section][account].canSuspend = canSuspend;
        accessControl[section][account].canResume = canResume;
        emit AccessControlUpdated(section, account, canSuspend, canResume);
    }

    /* ========== EVENTS ========== */

    event SystemSuspended(uint256 reason);
    event SystemResumed(uint256 reason);

    event IssuanceSuspended(uint256 reason);
    event IssuanceResumed(uint256 reason);

    event ExchangeSuspended(uint256 reason);
    event ExchangeResumed(uint256 reason);

    event FuturesSuspended(uint256 reason);
    event FuturesResumed(uint256 reason);

    event SynthExchangeSuspended(bytes32 currencyKey, uint256 reason);
    event SynthExchangeResumed(bytes32 currencyKey, uint256 reason);

    event SynthSuspended(bytes32 currencyKey, uint256 reason);
    event SynthResumed(bytes32 currencyKey, uint256 reason);

    event FuturesMarketSuspended(bytes32 marketKey, uint256 reason);
    event FuturesMarketResumed(bytes32 marketKey, uint256 reason);

    event AccessControlUpdated(bytes32 indexed section, address indexed account, bool canSuspend, bool canResume);
}

    

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: ReadProxy.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/ReadProxy.sol
* Docs: https://docs.synthetix.io/contracts/ReadProxy
*
* Contract Dependencies: 
*	- Owned
* Libraries: (none)
*
* MIT License
* ===========
*
* Copyright (c) 2020 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/

/* ===============================================
* Flattened with Solidifier by Coinage
* 
* https://solidifier.coina.ge
* ===============================================
*/


pragma solidity ^0.5.16;


// https://docs.synthetix.io/contracts/Owned
contract Owned {
    address public owner;
    address public nominatedOwner;

    constructor(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner {
        require(msg.sender == owner, "Only the contract owner may perform this action");
        _;
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


// solhint-disable payable-fallback

// https://docs.synthetix.io/contracts/ReadProxy
contract ReadProxy is Owned {
    address public target;

    constructor(address _owner) public Owned(_owner) {}

    function setTarget(address _target) external onlyOwner {
        target = _target;
        emit TargetUpdated(target);
    }

    function() external {
        // The basics of a proxy read call
        // Note that msg.sender in the underlying will always be the address of this contract.
        assembly {
            calldatacopy(0, 0, calldatasize)

            // Use of staticcall - this will revert if the underlying function mutates state
            let result := staticcall(gas, sload(target_slot), 0, calldatasize, 0, 0)
            returndatacopy(0, 0, returndatasize)

            if iszero(result) {
                revert(0, returndatasize)
            }
            return(0, returndatasize)
        }
    }

    event TargetUpdated(address newTarget);
}


    

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: AddressResolver.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/AddressResolver.sol
* Docs: https://docs.synthetix.io/contracts/AddressResolver
*
* Contract Dependencies: 
*	- IAddressResolver
*	- Owned
* Libraries: (none)
*
* MIT License
* ===========
*
* Copyright (c) 2020 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/



pragma solidity ^0.5.16;


// https://docs.synthetix.io/contracts/source/contracts/owned
contract Owned {
    address public owner;
    address public nominatedOwner;

    constructor(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


// https://docs.synthetix.io/contracts/source/interfaces/iaddressresolver
interface IAddressResolver {
    function getAddress(bytes32 name) external view returns (address);

    function getSynth(bytes32 key) external view returns (address);

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address);
}


// https://docs.synthetix.io/contracts/source/interfaces/isynth
interface ISynth {
    // Views
    function currencyKey() external view returns (bytes32);

    function transferableSynths(address account) external view returns (uint);

    // Mutative functions
    function transferAndSettle(address to, uint value) external returns (bool);

    function transferFromAndSettle(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Restricted: used internally to Synthetix
    function burn(address account, uint amount) external;

    function issue(address account, uint amount) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/iissuer
interface IIssuer {
    // Views
    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function canBurnSynths(address account) external view returns (bool);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function collateralisationRatioAndAnyRatesInvalid(address _issuer)
        external
        view
        returns (uint cratio, bool anyRateIsInvalid);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint debtBalance);

    function issuanceRatio() external view returns (uint);

    function lastIssueEvent(address account) external view returns (uint);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function minimumStakeTime() external view returns (uint);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function getSynths(bytes32[] calldata currencyKeys) external view returns (ISynth[] memory);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey, bool excludeEtherCollateral) external view returns (uint);

    function transferableSynthetixAndAnyRateIsInvalid(address account, uint balance)
        external
        view
        returns (uint transferable, bool anyRateIsInvalid);

    // Restricted: used internally to Synthetix
    function issueSynths(address from, uint amount) external;

    function issueSynthsOnBehalf(
        address issueFor,
        address from,
        uint amount
    ) external;

    function issueMaxSynths(address from) external;

    function issueMaxSynthsOnBehalf(address issueFor, address from) external;

    function burnSynths(address from, uint amount) external;

    function burnSynthsOnBehalf(
        address burnForAddress,
        address from,
        uint amount
    ) external;

    function burnSynthsToTarget(address from) external;

    function burnSynthsToTargetOnBehalf(address burnForAddress, address from) external;

    function liquidateDelinquentAccount(
        address account,
        uint susdAmount,
        address liquidator
    ) external returns (uint totalRedeemed, uint amountToLiquidate);
}


// solhint-disable payable-fallback

// https://docs.synthetix.io/contracts/source/contracts/readproxy
contract ReadProxy is Owned {
    address public target;

    constructor(address _owner) public Owned(_owner) {}

    function setTarget(address _target) external onlyOwner {
        target = _target;
        emit TargetUpdated(target);
    }

    function() external {
        // The basics of a proxy read call
        // Note that msg.sender in the underlying will always be the address of this contract.
        assembly {
            calldatacopy(0, 0, calldatasize)

            // Use of staticcall - this will revert if the underlying function mutates state
            let result := staticcall(gas, sload(target_slot), 0, calldatasize, 0, 0)
            returndatacopy(0, 0, returndatasize)

            if iszero(result) {
                revert(0, returndatasize)
            }
            return(0, returndatasize)
        }
    }

    event TargetUpdated(address newTarget);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/mixinresolver
contract MixinResolver {
    AddressResolver public resolver;

    mapping(bytes32 => address) private addressCache;

    constructor(address _resolver) internal {
        resolver = AddressResolver(_resolver);
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function combineArrays(bytes32[] memory first, bytes32[] memory second)
        internal
        pure
        returns (bytes32[] memory combination)
    {
        combination = new bytes32[](first.length + second.length);

        for (uint i = 0; i < first.length; i++) {
            combination[i] = first[i];
        }

        for (uint j = 0; j < second.length; j++) {
            combination[first.length + j] = second[j];
        }
    }

    /* ========== PUBLIC FUNCTIONS ========== */

    // Note: this function is public not external in order for it to be overridden and invoked via super in subclasses
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {}

    function rebuildCache() public {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        // The resolver must call this function whenver it updates its state
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // Note: can only be invoked once the resolver has all the targets needed added
            address destination = resolver.requireAndGetAddress(
                name,
                string(abi.encodePacked("Resolver missing target: ", name))
            );
            addressCache[name] = destination;
            emit CacheUpdated(name, destination);
        }
    }

    /* ========== VIEWS ========== */

    function isResolverCached() external view returns (bool) {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // false if our cache is invalid or if the resolver doesn't have the required address
            if (resolver.getAddress(name) != addressCache[name] || addressCache[name] == address(0)) {
                return false;
            }
        }

        return true;
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function requireAndGetAddress(bytes32 name) internal view returns (address) {
        address _foundAddress = addressCache[name];
        require(_foundAddress != address(0), string(abi.encodePacked("Missing address: ", name)));
        return _foundAddress;
    }

    /* ========== EVENTS ========== */

    event CacheUpdated(bytes32 name, address destination);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/addressresolver
contract AddressResolver is Owned, IAddressResolver {
    mapping(bytes32 => address) public repository;

    constructor(address _owner) public Owned(_owner) {}

    /* ========== RESTRICTED FUNCTIONS ========== */

    function importAddresses(bytes32[] calldata names, address[] calldata destinations) external onlyOwner {
        require(names.length == destinations.length, "Input lengths must match");

        for (uint i = 0; i < names.length; i++) {
            bytes32 name = names[i];
            address destination = destinations[i];
            repository[name] = destination;
            emit AddressImported(name, destination);
        }
    }

    /* ========= PUBLIC FUNCTIONS ========== */

    function rebuildCaches(MixinResolver[] calldata destinations) external {
        for (uint i = 0; i < destinations.length; i++) {
            destinations[i].rebuildCache();
        }
    }

    /* ========== VIEWS ========== */

    function areAddressesImported(bytes32[] calldata names, address[] calldata destinations) external view returns (bool) {
        for (uint i = 0; i < names.length; i++) {
            if (repository[names[i]] != destinations[i]) {
                return false;
            }
        }
        return true;
    }

    function getAddress(bytes32 name) external view returns (address) {
        return repository[name];
    }

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address) {
        address _foundAddress = repository[name];
        require(_foundAddress != address(0), reason);
        return _foundAddress;
    }

    function getSynth(bytes32 key) external view returns (address) {
        IIssuer issuer = IIssuer(repository["Issuer"]);
        require(address(issuer) != address(0), "Cannot find Issuer address");
        return address(issuer.synths(key));
    }

    /* ========== EVENTS ========== */

    event AddressImported(bytes32 name, address destination);
}

    

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: Issuer.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/Issuer.sol
* Docs: https://docs.synthetix.io/contracts/Issuer
*
* Contract Dependencies: 
*	- IAddressResolver
*	- IIssuer
*	- MixinResolver
*	- MixinSystemSettings
*	- Owned
* Libraries: 
*	- SafeCast
*	- SafeDecimalMath
*	- SafeMath
*
* MIT License
* ===========
*
* Copyright (c) 2022 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/



pragma solidity ^0.5.16;

// https://docs.synthetix.io/contracts/source/contracts/owned
contract Owned {
    address public owner;
    address public nominatedOwner;

    constructor(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


// https://docs.synthetix.io/contracts/source/interfaces/iaddressresolver
interface IAddressResolver {
    function getAddress(bytes32 name) external view returns (address);

    function getSynth(bytes32 key) external view returns (address);

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address);
}


// https://docs.synthetix.io/contracts/source/interfaces/isynth
interface ISynth {
    // Views
    function currencyKey() external view returns (bytes32);

    function transferableSynths(address account) external view returns (uint);

    // Mutative functions
    function transferAndSettle(address to, uint value) external returns (bool);

    function transferFromAndSettle(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Restricted: used internally to Synthetix
    function burn(address account, uint amount) external;

    function issue(address account, uint amount) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/iissuer
interface IIssuer {
    // Views

    function allNetworksDebtInfo()
        external
        view
        returns (
            uint256 debt,
            uint256 sharesSupply,
            bool isStale
        );

    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function canBurnSynths(address account) external view returns (bool);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function collateralisationRatioAndAnyRatesInvalid(address _issuer)
        external
        view
        returns (uint cratio, bool anyRateIsInvalid);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint debtBalance);

    function issuanceRatio() external view returns (uint);

    function lastIssueEvent(address account) external view returns (uint);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function minimumStakeTime() external view returns (uint);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function getSynths(bytes32[] calldata currencyKeys) external view returns (ISynth[] memory);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey, bool excludeOtherCollateral) external view returns (uint);

    function transferableSynthetixAndAnyRateIsInvalid(address account, uint balance)
        external
        view
        returns (uint transferable, bool anyRateIsInvalid);

    function liquidationAmounts(address account, bool isSelfLiquidation)
        external
        view
        returns (
            uint totalRedeemed,
            uint debtToRemove,
            uint escrowToLiquidate,
            uint initialDebtBalance
        );

    // Restricted: used internally to Synthetix
    function addSynths(ISynth[] calldata synthsToAdd) external;

    function issueSynths(address from, uint amount) external;

    function issueSynthsOnBehalf(
        address issueFor,
        address from,
        uint amount
    ) external;

    function issueMaxSynths(address from) external;

    function issueMaxSynthsOnBehalf(address issueFor, address from) external;

    function burnSynths(address from, uint amount) external;

    function burnSynthsOnBehalf(
        address burnForAddress,
        address from,
        uint amount
    ) external;

    function burnSynthsToTarget(address from) external;

    function burnSynthsToTargetOnBehalf(address burnForAddress, address from) external;

    function burnForRedemption(
        address deprecatedSynthProxy,
        address account,
        uint balance
    ) external;

    function setCurrentPeriodId(uint128 periodId) external;

    function liquidateAccount(address account, bool isSelfLiquidation)
        external
        returns (
            uint totalRedeemed,
            uint debtRemoved,
            uint escrowToLiquidate
        );

    function issueSynthsWithoutDebt(
        bytes32 currencyKey,
        address to,
        uint amount
    ) external returns (bool rateInvalid);

    function burnSynthsWithoutDebt(
        bytes32 currencyKey,
        address to,
        uint amount
    ) external returns (bool rateInvalid);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/addressresolver
contract AddressResolver is Owned, IAddressResolver {
    mapping(bytes32 => address) public repository;

    constructor(address _owner) public Owned(_owner) {}

    /* ========== RESTRICTED FUNCTIONS ========== */

    function importAddresses(bytes32[] calldata names, address[] calldata destinations) external onlyOwner {
        require(names.length == destinations.length, "Input lengths must match");

        for (uint i = 0; i < names.length; i++) {
            bytes32 name = names[i];
            address destination = destinations[i];
            repository[name] = destination;
            emit AddressImported(name, destination);
        }
    }

    /* ========= PUBLIC FUNCTIONS ========== */

    function rebuildCaches(MixinResolver[] calldata destinations) external {
        for (uint i = 0; i < destinations.length; i++) {
            destinations[i].rebuildCache();
        }
    }

    /* ========== VIEWS ========== */

    function areAddressesImported(bytes32[] calldata names, address[] calldata destinations) external view returns (bool) {
        for (uint i = 0; i < names.length; i++) {
            if (repository[names[i]] != destinations[i]) {
                return false;
            }
        }
        return true;
    }

    function getAddress(bytes32 name) external view returns (address) {
        return repository[name];
    }

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address) {
        address _foundAddress = repository[name];
        require(_foundAddress != address(0), reason);
        return _foundAddress;
    }

    function getSynth(bytes32 key) external view returns (address) {
        IIssuer issuer = IIssuer(repository["Issuer"]);
        require(address(issuer) != address(0), "Cannot find Issuer address");
        return address(issuer.synths(key));
    }

    /* ========== EVENTS ========== */

    event AddressImported(bytes32 name, address destination);
}


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/mixinresolver
contract MixinResolver {
    AddressResolver public resolver;

    mapping(bytes32 => address) private addressCache;

    constructor(address _resolver) internal {
        resolver = AddressResolver(_resolver);
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function combineArrays(bytes32[] memory first, bytes32[] memory second)
        internal
        pure
        returns (bytes32[] memory combination)
    {
        combination = new bytes32[](first.length + second.length);

        for (uint i = 0; i < first.length; i++) {
            combination[i] = first[i];
        }

        for (uint j = 0; j < second.length; j++) {
            combination[first.length + j] = second[j];
        }
    }

    /* ========== PUBLIC FUNCTIONS ========== */

    // Note: this function is public not external in order for it to be overridden and invoked via super in subclasses
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {}

    function rebuildCache() public {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        // The resolver must call this function whenver it updates its state
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // Note: can only be invoked once the resolver has all the targets needed added
            address destination =
                resolver.requireAndGetAddress(name, string(abi.encodePacked("Resolver missing target: ", name)));
            addressCache[name] = destination;
            emit CacheUpdated(name, destination);
        }
    }

    /* ========== VIEWS ========== */

    function isResolverCached() external view returns (bool) {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // false if our cache is invalid or if the resolver doesn't have the required address
            if (resolver.getAddress(name) != addressCache[name] || addressCache[name] == address(0)) {
                return false;
            }
        }

        return true;
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function requireAndGetAddress(bytes32 name) internal view returns (address) {
        address _foundAddress = addressCache[name];
        require(_foundAddress != address(0), string(abi.encodePacked("Missing address: ", name)));
        return _foundAddress;
    }

    /* ========== EVENTS ========== */

    event CacheUpdated(bytes32 name, address destination);
}


// https://docs.synthetix.io/contracts/source/interfaces/iflexiblestorage
interface IFlexibleStorage {
    // Views
    function getUIntValue(bytes32 contractName, bytes32 record) external view returns (uint);

    function getUIntValues(bytes32 contractName, bytes32[] calldata records) external view returns (uint[] memory);

    function getIntValue(bytes32 contractName, bytes32 record) external view returns (int);

    function getIntValues(bytes32 contractName, bytes32[] calldata records) external view returns (int[] memory);

    function getAddressValue(bytes32 contractName, bytes32 record) external view returns (address);

    function getAddressValues(bytes32 contractName, bytes32[] calldata records) external view returns (address[] memory);

    function getBoolValue(bytes32 contractName, bytes32 record) external view returns (bool);

    function getBoolValues(bytes32 contractName, bytes32[] calldata records) external view returns (bool[] memory);

    function getBytes32Value(bytes32 contractName, bytes32 record) external view returns (bytes32);

    function getBytes32Values(bytes32 contractName, bytes32[] calldata records) external view returns (bytes32[] memory);

    // Mutative functions
    function deleteUIntValue(bytes32 contractName, bytes32 record) external;

    function deleteIntValue(bytes32 contractName, bytes32 record) external;

    function deleteAddressValue(bytes32 contractName, bytes32 record) external;

    function deleteBoolValue(bytes32 contractName, bytes32 record) external;

    function deleteBytes32Value(bytes32 contractName, bytes32 record) external;

    function setUIntValue(
        bytes32 contractName,
        bytes32 record,
        uint value
    ) external;

    function setUIntValues(
        bytes32 contractName,
        bytes32[] calldata records,
        uint[] calldata values
    ) external;

    function setIntValue(
        bytes32 contractName,
        bytes32 record,
        int value
    ) external;

    function setIntValues(
        bytes32 contractName,
        bytes32[] calldata records,
        int[] calldata values
    ) external;

    function setAddressValue(
        bytes32 contractName,
        bytes32 record,
        address value
    ) external;

    function setAddressValues(
        bytes32 contractName,
        bytes32[] calldata records,
        address[] calldata values
    ) external;

    function setBoolValue(
        bytes32 contractName,
        bytes32 record,
        bool value
    ) external;

    function setBoolValues(
        bytes32 contractName,
        bytes32[] calldata records,
        bool[] calldata values
    ) external;

    function setBytes32Value(
        bytes32 contractName,
        bytes32 record,
        bytes32 value
    ) external;

    function setBytes32Values(
        bytes32 contractName,
        bytes32[] calldata records,
        bytes32[] calldata values
    ) external;
}


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/mixinsystemsettings
contract MixinSystemSettings is MixinResolver {
    // must match the one defined SystemSettingsLib, defined in both places due to sol v0.5 limitations
    bytes32 internal constant SETTING_CONTRACT_NAME = "SystemSettings";

    bytes32 internal constant SETTING_WAITING_PERIOD_SECS = "waitingPeriodSecs";
    bytes32 internal constant SETTING_PRICE_DEVIATION_THRESHOLD_FACTOR = "priceDeviationThresholdFactor";
    bytes32 internal constant SETTING_ISSUANCE_RATIO = "issuanceRatio";
    bytes32 internal constant SETTING_FEE_PERIOD_DURATION = "feePeriodDuration";
    bytes32 internal constant SETTING_TARGET_THRESHOLD = "targetThreshold";
    bytes32 internal constant SETTING_LIQUIDATION_DELAY = "liquidationDelay";
    bytes32 internal constant SETTING_LIQUIDATION_RATIO = "liquidationRatio";
    bytes32 internal constant SETTING_LIQUIDATION_ESCROW_DURATION = "liquidationEscrowDuration";
    bytes32 internal constant SETTING_LIQUIDATION_PENALTY = "liquidationPenalty";
    bytes32 internal constant SETTING_SNX_LIQUIDATION_PENALTY = "snxLiquidationPenalty";
    bytes32 internal constant SETTING_SELF_LIQUIDATION_PENALTY = "selfLiquidationPenalty";
    bytes32 internal constant SETTING_FLAG_REWARD = "flagReward";
    bytes32 internal constant SETTING_LIQUIDATE_REWARD = "liquidateReward";
    bytes32 internal constant SETTING_RATE_STALE_PERIOD = "rateStalePeriod";
    /* ========== Exchange Fees Related ========== */
    bytes32 internal constant SETTING_EXCHANGE_FEE_RATE = "exchangeFeeRate";
    bytes32 internal constant SETTING_EXCHANGE_DYNAMIC_FEE_THRESHOLD = "exchangeDynamicFeeThreshold";
    bytes32 internal constant SETTING_EXCHANGE_DYNAMIC_FEE_WEIGHT_DECAY = "exchangeDynamicFeeWeightDecay";
    bytes32 internal constant SETTING_EXCHANGE_DYNAMIC_FEE_ROUNDS = "exchangeDynamicFeeRounds";
    bytes32 internal constant SETTING_EXCHANGE_MAX_DYNAMIC_FEE = "exchangeMaxDynamicFee";
    /* ========== End Exchange Fees Related ========== */
    bytes32 internal constant SETTING_MINIMUM_STAKE_TIME = "minimumStakeTime";
    bytes32 internal constant SETTING_AGGREGATOR_WARNING_FLAGS = "aggregatorWarningFlags";
    bytes32 internal constant SETTING_TRADING_REWARDS_ENABLED = "tradingRewardsEnabled";
    bytes32 internal constant SETTING_DEBT_SNAPSHOT_STALE_TIME = "debtSnapshotStaleTime";
    bytes32 internal constant SETTING_CROSS_DOMAIN_DEPOSIT_GAS_LIMIT = "crossDomainDepositGasLimit";
    bytes32 internal constant SETTING_CROSS_DOMAIN_ESCROW_GAS_LIMIT = "crossDomainEscrowGasLimit";
    bytes32 internal constant SETTING_CROSS_DOMAIN_REWARD_GAS_LIMIT = "crossDomainRewardGasLimit";
    bytes32 internal constant SETTING_CROSS_DOMAIN_WITHDRAWAL_GAS_LIMIT = "crossDomainWithdrawalGasLimit";
    bytes32 internal constant SETTING_CROSS_DOMAIN_FEE_PERIOD_CLOSE_GAS_LIMIT = "crossDomainCloseGasLimit";
    bytes32 internal constant SETTING_CROSS_DOMAIN_RELAY_GAS_LIMIT = "crossDomainRelayGasLimit";
    bytes32 internal constant SETTING_ETHER_WRAPPER_MAX_ETH = "etherWrapperMaxETH";
    bytes32 internal constant SETTING_ETHER_WRAPPER_MINT_FEE_RATE = "etherWrapperMintFeeRate";
    bytes32 internal constant SETTING_ETHER_WRAPPER_BURN_FEE_RATE = "etherWrapperBurnFeeRate";
    bytes32 internal constant SETTING_WRAPPER_MAX_TOKEN_AMOUNT = "wrapperMaxTokens";
    bytes32 internal constant SETTING_WRAPPER_MINT_FEE_RATE = "wrapperMintFeeRate";
    bytes32 internal constant SETTING_WRAPPER_BURN_FEE_RATE = "wrapperBurnFeeRate";
    bytes32 internal constant SETTING_INTERACTION_DELAY = "interactionDelay";
    bytes32 internal constant SETTING_COLLAPSE_FEE_RATE = "collapseFeeRate";
    bytes32 internal constant SETTING_ATOMIC_MAX_VOLUME_PER_BLOCK = "atomicMaxVolumePerBlock";
    bytes32 internal constant SETTING_ATOMIC_TWAP_WINDOW = "atomicTwapWindow";
    bytes32 internal constant SETTING_ATOMIC_EQUIVALENT_FOR_DEX_PRICING = "atomicEquivalentForDexPricing";
    bytes32 internal constant SETTING_ATOMIC_EXCHANGE_FEE_RATE = "atomicExchangeFeeRate";
    bytes32 internal constant SETTING_ATOMIC_VOLATILITY_CONSIDERATION_WINDOW = "atomicVolConsiderationWindow";
    bytes32 internal constant SETTING_ATOMIC_VOLATILITY_UPDATE_THRESHOLD = "atomicVolUpdateThreshold";
    bytes32 internal constant SETTING_PURE_CHAINLINK_PRICE_FOR_ATOMIC_SWAPS_ENABLED = "pureChainlinkForAtomicsEnabled";
    bytes32 internal constant SETTING_CROSS_SYNTH_TRANSFER_ENABLED = "crossChainSynthTransferEnabled";

    bytes32 internal constant CONTRACT_FLEXIBLESTORAGE = "FlexibleStorage";

    enum CrossDomainMessageGasLimits {Deposit, Escrow, Reward, Withdrawal, CloseFeePeriod, Relay}

    struct DynamicFeeConfig {
        uint threshold;
        uint weightDecay;
        uint rounds;
        uint maxFee;
    }

    constructor(address _resolver) internal MixinResolver(_resolver) {}

    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {
        addresses = new bytes32[](1);
        addresses[0] = CONTRACT_FLEXIBLESTORAGE;
    }

    function flexibleStorage() internal view returns (IFlexibleStorage) {
        return IFlexibleStorage(requireAndGetAddress(CONTRACT_FLEXIBLESTORAGE));
    }

    function _getGasLimitSetting(CrossDomainMessageGasLimits gasLimitType) internal pure returns (bytes32) {
        if (gasLimitType == CrossDomainMessageGasLimits.Deposit) {
            return SETTING_CROSS_DOMAIN_DEPOSIT_GAS_LIMIT;
        } else if (gasLimitType == CrossDomainMessageGasLimits.Escrow) {
            return SETTING_CROSS_DOMAIN_ESCROW_GAS_LIMIT;
        } else if (gasLimitType == CrossDomainMessageGasLimits.Reward) {
            return SETTING_CROSS_DOMAIN_REWARD_GAS_LIMIT;
        } else if (gasLimitType == CrossDomainMessageGasLimits.Withdrawal) {
            return SETTING_CROSS_DOMAIN_WITHDRAWAL_GAS_LIMIT;
        } else if (gasLimitType == CrossDomainMessageGasLimits.Relay) {
            return SETTING_CROSS_DOMAIN_RELAY_GAS_LIMIT;
        } else if (gasLimitType == CrossDomainMessageGasLimits.CloseFeePeriod) {
            return SETTING_CROSS_DOMAIN_FEE_PERIOD_CLOSE_GAS_LIMIT;
        } else {
            revert("Unknown gas limit type");
        }
    }

    function getCrossDomainMessageGasLimit(CrossDomainMessageGasLimits gasLimitType) internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, _getGasLimitSetting(gasLimitType));
    }

    function getTradingRewardsEnabled() internal view returns (bool) {
        return flexibleStorage().getBoolValue(SETTING_CONTRACT_NAME, SETTING_TRADING_REWARDS_ENABLED);
    }

    function getWaitingPeriodSecs() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_WAITING_PERIOD_SECS);
    }

    function getPriceDeviationThresholdFactor() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_PRICE_DEVIATION_THRESHOLD_FACTOR);
    }

    function getIssuanceRatio() internal view returns (uint) {
        // lookup on flexible storage directly for gas savings (rather than via SystemSettings)
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_ISSUANCE_RATIO);
    }

    function getFeePeriodDuration() internal view returns (uint) {
        // lookup on flexible storage directly for gas savings (rather than via SystemSettings)
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_FEE_PERIOD_DURATION);
    }

    function getTargetThreshold() internal view returns (uint) {
        // lookup on flexible storage directly for gas savings (rather than via SystemSettings)
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_TARGET_THRESHOLD);
    }

    function getLiquidationDelay() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_LIQUIDATION_DELAY);
    }

    function getLiquidationRatio() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_LIQUIDATION_RATIO);
    }

    function getLiquidationEscrowDuration() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_LIQUIDATION_ESCROW_DURATION);
    }

    function getLiquidationPenalty() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_LIQUIDATION_PENALTY);
    }

    function getSnxLiquidationPenalty() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_SNX_LIQUIDATION_PENALTY);
    }

    function getSelfLiquidationPenalty() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_SELF_LIQUIDATION_PENALTY);
    }

    function getFlagReward() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_FLAG_REWARD);
    }

    function getLiquidateReward() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_LIQUIDATE_REWARD);
    }

    function getRateStalePeriod() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_RATE_STALE_PERIOD);
    }

    /* ========== Exchange Related Fees ========== */
    function getExchangeFeeRate(bytes32 currencyKey) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_EXCHANGE_FEE_RATE, currencyKey))
            );
    }

    /// @notice Get exchange dynamic fee related keys
    /// @return threshold, weight decay, rounds, and max fee
    function getExchangeDynamicFeeConfig() internal view returns (DynamicFeeConfig memory) {
        bytes32[] memory keys = new bytes32[](4);
        keys[0] = SETTING_EXCHANGE_DYNAMIC_FEE_THRESHOLD;
        keys[1] = SETTING_EXCHANGE_DYNAMIC_FEE_WEIGHT_DECAY;
        keys[2] = SETTING_EXCHANGE_DYNAMIC_FEE_ROUNDS;
        keys[3] = SETTING_EXCHANGE_MAX_DYNAMIC_FEE;
        uint[] memory values = flexibleStorage().getUIntValues(SETTING_CONTRACT_NAME, keys);
        return DynamicFeeConfig({threshold: values[0], weightDecay: values[1], rounds: values[2], maxFee: values[3]});
    }

    /* ========== End Exchange Related Fees ========== */

    function getMinimumStakeTime() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_MINIMUM_STAKE_TIME);
    }

    function getAggregatorWarningFlags() internal view returns (address) {
        return flexibleStorage().getAddressValue(SETTING_CONTRACT_NAME, SETTING_AGGREGATOR_WARNING_FLAGS);
    }

    function getDebtSnapshotStaleTime() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_DEBT_SNAPSHOT_STALE_TIME);
    }

    function getEtherWrapperMaxETH() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_ETHER_WRAPPER_MAX_ETH);
    }

    function getEtherWrapperMintFeeRate() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_ETHER_WRAPPER_MINT_FEE_RATE);
    }

    function getEtherWrapperBurnFeeRate() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_ETHER_WRAPPER_BURN_FEE_RATE);
    }

    function getWrapperMaxTokenAmount(address wrapper) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_WRAPPER_MAX_TOKEN_AMOUNT, wrapper))
            );
    }

    function getWrapperMintFeeRate(address wrapper) internal view returns (int) {
        return
            flexibleStorage().getIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_WRAPPER_MINT_FEE_RATE, wrapper))
            );
    }

    function getWrapperBurnFeeRate(address wrapper) internal view returns (int) {
        return
            flexibleStorage().getIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_WRAPPER_BURN_FEE_RATE, wrapper))
            );
    }

    function getInteractionDelay(address collateral) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_INTERACTION_DELAY, collateral))
            );
    }

    function getCollapseFeeRate(address collateral) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_COLLAPSE_FEE_RATE, collateral))
            );
    }

    function getAtomicMaxVolumePerBlock() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_ATOMIC_MAX_VOLUME_PER_BLOCK);
    }

    function getAtomicTwapWindow() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_ATOMIC_TWAP_WINDOW);
    }

    function getAtomicEquivalentForDexPricing(bytes32 currencyKey) internal view returns (address) {
        return
            flexibleStorage().getAddressValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_ATOMIC_EQUIVALENT_FOR_DEX_PRICING, currencyKey))
            );
    }

    function getAtomicExchangeFeeRate(bytes32 currencyKey) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_ATOMIC_EXCHANGE_FEE_RATE, currencyKey))
            );
    }

    function getAtomicVolatilityConsiderationWindow(bytes32 currencyKey) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_ATOMIC_VOLATILITY_CONSIDERATION_WINDOW, currencyKey))
            );
    }

    function getAtomicVolatilityUpdateThreshold(bytes32 currencyKey) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_ATOMIC_VOLATILITY_UPDATE_THRESHOLD, currencyKey))
            );
    }

    function getPureChainlinkPriceForAtomicSwapsEnabled(bytes32 currencyKey) internal view returns (bool) {
        return
            flexibleStorage().getBoolValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_PURE_CHAINLINK_PRICE_FOR_ATOMIC_SWAPS_ENABLED, currencyKey))
            );
    }

    function getCrossChainSynthTransferEnabled(bytes32 currencyKey) internal view returns (uint) {
        return
            flexibleStorage().getUIntValue(
                SETTING_CONTRACT_NAME,
                keccak256(abi.encodePacked(SETTING_CROSS_SYNTH_TRANSFER_ENABLED, currencyKey))
            );
    }

    function getExchangeMaxDynamicFee() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_EXCHANGE_MAX_DYNAMIC_FEE);
    }

    function getExchangeDynamicFeeRounds() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_EXCHANGE_DYNAMIC_FEE_ROUNDS);
    }

    function getExchangeDynamicFeeThreshold() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_EXCHANGE_DYNAMIC_FEE_THRESHOLD);
    }

    function getExchangeDynamicFeeWeightDecay() internal view returns (uint) {
        return flexibleStorage().getUIntValue(SETTING_CONTRACT_NAME, SETTING_EXCHANGE_DYNAMIC_FEE_WEIGHT_DECAY);
    }
}


// SPDX-License-Identifier: MIT


/**
 * @dev Wrappers over Solidity's uintXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value < 2**128, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value < 2**64, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value < 2**32, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value < 2**16, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value < 2**8, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        require(value < 2**255, "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}


// Libraries


// https://docs.synthetix.io/contracts/source/libraries/safedecimalmath
library SafeDecimalMath {
    using SafeMath for uint;

    /* Number of decimal places in the representations. */
    uint8 public constant decimals = 18;
    uint8 public constant highPrecisionDecimals = 27;

    /* The number representing 1.0. */
    uint public constant UNIT = 10**uint(decimals);

    /* The number representing 1.0 for higher fidelity numbers. */
    uint public constant PRECISE_UNIT = 10**uint(highPrecisionDecimals);
    uint private constant UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR = 10**uint(highPrecisionDecimals - decimals);

    /**
     * @return Provides an interface to UNIT.
     */
    function unit() external pure returns (uint) {
        return UNIT;
    }

    /**
     * @return Provides an interface to PRECISE_UNIT.
     */
    function preciseUnit() external pure returns (uint) {
        return PRECISE_UNIT;
    }

    /**
     * @return The result of multiplying x and y, interpreting the operands as fixed-point
     * decimals.
     *
     * @dev A unit factor is divided out after the product of x and y is evaluated,
     * so that product must be less than 2**256. As this is an integer division,
     * the internal division always rounds down. This helps save on gas. Rounding
     * is more expensive on gas.
     */
    function multiplyDecimal(uint x, uint y) internal pure returns (uint) {
        /* Divide by UNIT to remove the extra factor introduced by the product. */
        return x.mul(y) / UNIT;
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of the specified precision unit.
     *
     * @dev The operands should be in the form of a the specified unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function _multiplyDecimalRound(
        uint x,
        uint y,
        uint precisionUnit
    ) private pure returns (uint) {
        /* Divide by UNIT to remove the extra factor introduced by the product. */
        uint quotientTimesTen = x.mul(y) / (precisionUnit / 10);

        if (quotientTimesTen % 10 >= 5) {
            quotientTimesTen += 10;
        }

        return quotientTimesTen / 10;
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of a precise unit.
     *
     * @dev The operands should be in the precise unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function multiplyDecimalRoundPrecise(uint x, uint y) internal pure returns (uint) {
        return _multiplyDecimalRound(x, y, PRECISE_UNIT);
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of a standard unit.
     *
     * @dev The operands should be in the standard unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function multiplyDecimalRound(uint x, uint y) internal pure returns (uint) {
        return _multiplyDecimalRound(x, y, UNIT);
    }

    /**
     * @return The result of safely dividing x and y. The return value is a high
     * precision decimal.
     *
     * @dev y is divided after the product of x and the standard precision unit
     * is evaluated, so the product of x and UNIT must be less than 2**256. As
     * this is an integer division, the result is always rounded down.
     * This helps save on gas. Rounding is more expensive on gas.
     */
    function divideDecimal(uint x, uint y) internal pure returns (uint) {
        /* Reintroduce the UNIT factor that will be divided out by y. */
        return x.mul(UNIT).div(y);
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * decimal in the precision unit specified in the parameter.
     *
     * @dev y is divided after the product of x and the specified precision unit
     * is evaluated, so the product of x and the specified precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function _divideDecimalRound(
        uint x,
        uint y,
        uint precisionUnit
    ) private pure returns (uint) {
        uint resultTimesTen = x.mul(precisionUnit * 10).div(y);

        if (resultTimesTen % 10 >= 5) {
            resultTimesTen += 10;
        }

        return resultTimesTen / 10;
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * standard precision decimal.
     *
     * @dev y is divided after the product of x and the standard precision unit
     * is evaluated, so the product of x and the standard precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function divideDecimalRound(uint x, uint y) internal pure returns (uint) {
        return _divideDecimalRound(x, y, UNIT);
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * high precision decimal.
     *
     * @dev y is divided after the product of x and the high precision unit
     * is evaluated, so the product of x and the high precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function divideDecimalRoundPrecise(uint x, uint y) internal pure returns (uint) {
        return _divideDecimalRound(x, y, PRECISE_UNIT);
    }

    /**
     * @dev Convert a standard decimal representation to a high precision one.
     */
    function decimalToPreciseDecimal(uint i) internal pure returns (uint) {
        return i.mul(UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR);
    }

    /**
     * @dev Convert a high precision decimal to a standard decimal representation.
     */
    function preciseDecimalToDecimal(uint i) internal pure returns (uint) {
        uint quotientTimesTen = i / (UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR / 10);

        if (quotientTimesTen % 10 >= 5) {
            quotientTimesTen += 10;
        }

        return quotientTimesTen / 10;
    }

    // Computes `a - b`, setting the value to 0 if b > a.
    function floorsub(uint a, uint b) internal pure returns (uint) {
        return b >= a ? 0 : a - b;
    }

    /* ---------- Utilities ---------- */
    /*
     * Absolute value of the input, returned as a signed number.
     */
    function signedAbs(int x) internal pure returns (int) {
        return x < 0 ? -x : x;
    }

    /*
     * Absolute value of the input, returned as an unsigned number.
     */
    function abs(int x) internal pure returns (uint) {
        return uint(signedAbs(x));
    }
}


// https://docs.synthetix.io/contracts/source/interfaces/isynthetixdebtshare
interface ISynthetixDebtShare {
    // Views

    function currentPeriodId() external view returns (uint128);

    function allowance(address account, address spender) external view returns (uint);

    function balanceOf(address account) external view returns (uint);

    function balanceOfOnPeriod(address account, uint periodId) external view returns (uint);

    function totalSupply() external view returns (uint);

    function sharePercent(address account) external view returns (uint);

    function sharePercentOnPeriod(address account, uint periodId) external view returns (uint);

    // Mutative functions

    function takeSnapshot(uint128 id) external;

    function mintShare(address account, uint256 amount) external;

    function burnShare(address account, uint256 amount) external;

    function approve(address, uint256) external pure returns (bool);

    function transfer(address to, uint256 amount) external pure returns (bool);

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    function addAuthorizedBroker(address target) external;

    function removeAuthorizedBroker(address target) external;

    function addAuthorizedToSnapshot(address target) external;

    function removeAuthorizedToSnapshot(address target) external;
}


interface IVirtualSynth {
    // Views
    function balanceOfUnderlying(address account) external view returns (uint);

    function rate() external view returns (uint);

    function readyToSettle() external view returns (bool);

    function secsLeftInWaitingPeriod() external view returns (uint);

    function settled() external view returns (bool);

    function synth() external view returns (ISynth);

    // Mutative functions
    function settle(address account) external;
}


pragma experimental ABIEncoderV2;


// https://docs.synthetix.io/contracts/source/interfaces/iexchanger
interface IExchanger {
    struct ExchangeEntrySettlement {
        bytes32 src;
        uint amount;
        bytes32 dest;
        uint reclaim;
        uint rebate;
        uint srcRoundIdAtPeriodEnd;
        uint destRoundIdAtPeriodEnd;
        uint timestamp;
    }

    struct ExchangeEntry {
        uint sourceRate;
        uint destinationRate;
        uint destinationAmount;
        uint exchangeFeeRate;
        uint exchangeDynamicFeeRate;
        uint roundIdForSrc;
        uint roundIdForDest;
        uint sourceAmountAfterSettlement;
    }

    // Views
    function calculateAmountAfterSettlement(
        address from,
        bytes32 currencyKey,
        uint amount,
        uint refunded
    ) external view returns (uint amountAfterSettlement);

    function isSynthRateInvalid(bytes32 currencyKey) external view returns (bool);

    function maxSecsLeftInWaitingPeriod(address account, bytes32 currencyKey) external view returns (uint);

    function settlementOwing(address account, bytes32 currencyKey)
        external
        view
        returns (
            uint reclaimAmount,
            uint rebateAmount,
            uint numEntries
        );

    function hasWaitingPeriodOrSettlementOwing(address account, bytes32 currencyKey) external view returns (bool);

    function feeRateForExchange(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view returns (uint);

    function dynamicFeeRateForExchange(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey)
        external
        view
        returns (uint feeRate, bool tooVolatile);

    function getAmountsForExchange(
        uint sourceAmount,
        bytes32 sourceCurrencyKey,
        bytes32 destinationCurrencyKey
    )
        external
        view
        returns (
            uint amountReceived,
            uint fee,
            uint exchangeFeeRate
        );

    function priceDeviationThresholdFactor() external view returns (uint);

    function waitingPeriodSecs() external view returns (uint);

    function lastExchangeRate(bytes32 currencyKey) external view returns (uint);

    // Mutative functions
    function exchange(
        address exchangeForAddress,
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress,
        bool virtualSynth,
        address rewardAddress,
        bytes32 trackingCode
    ) external returns (uint amountReceived, IVirtualSynth vSynth);

    function exchangeAtomically(
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress,
        bytes32 trackingCode,
        uint minAmount
    ) external returns (uint amountReceived);

    function settle(address from, bytes32 currencyKey)
        external
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntries
        );
}

// Used to have strongly-typed access to internal mutative functions in Synthetix
interface ISynthetixInternal {
    function emitExchangeTracking(
        bytes32 trackingCode,
        bytes32 toCurrencyKey,
        uint256 toAmount,
        uint256 fee
    ) external;

    function emitSynthExchange(
        address account,
        bytes32 fromCurrencyKey,
        uint fromAmount,
        bytes32 toCurrencyKey,
        uint toAmount,
        address toAddress
    ) external;

    function emitAtomicSynthExchange(
        address account,
        bytes32 fromCurrencyKey,
        uint fromAmount,
        bytes32 toCurrencyKey,
        uint toAmount,
        address toAddress
    ) external;

    function emitExchangeReclaim(
        address account,
        bytes32 currencyKey,
        uint amount
    ) external;

    function emitExchangeRebate(
        address account,
        bytes32 currencyKey,
        uint amount
    ) external;
}

interface IExchangerInternalDebtCache {
    function updateCachedSynthDebtsWithRates(bytes32[] calldata currencyKeys, uint[] calldata currencyRates) external;

    function updateCachedSynthDebts(bytes32[] calldata currencyKeys) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/idelegateapprovals
interface IDelegateApprovals {
    // Views
    function canBurnFor(address authoriser, address delegate) external view returns (bool);

    function canIssueFor(address authoriser, address delegate) external view returns (bool);

    function canClaimFor(address authoriser, address delegate) external view returns (bool);

    function canExchangeFor(address authoriser, address delegate) external view returns (bool);

    // Mutative
    function approveAllDelegatePowers(address delegate) external;

    function removeAllDelegatePowers(address delegate) external;

    function approveBurnOnBehalf(address delegate) external;

    function removeBurnOnBehalf(address delegate) external;

    function approveIssueOnBehalf(address delegate) external;

    function removeIssueOnBehalf(address delegate) external;

    function approveClaimOnBehalf(address delegate) external;

    function removeClaimOnBehalf(address delegate) external;

    function approveExchangeOnBehalf(address delegate) external;

    function removeExchangeOnBehalf(address delegate) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/IDirectIntegration
interface IDirectIntegrationManager {
    struct ParameterIntegrationSettings {
        bytes32 currencyKey;
        address dexPriceAggregator;
        address atomicEquivalentForDexPricing;
        uint atomicExchangeFeeRate;
        uint atomicTwapWindow;
        uint atomicMaxVolumePerBlock;
        uint atomicVolatilityConsiderationWindow;
        uint atomicVolatilityUpdateThreshold;
        uint exchangeFeeRate;
        uint exchangeMaxDynamicFee;
        uint exchangeDynamicFeeRounds;
        uint exchangeDynamicFeeThreshold;
        uint exchangeDynamicFeeWeightDecay;
    }

    function getExchangeParameters(address integration, bytes32 key)
        external
        view
        returns (ParameterIntegrationSettings memory settings);

    function setExchangeParameters(
        address integration,
        bytes32[] calldata currencyKeys,
        ParameterIntegrationSettings calldata params
    ) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/iexchangerates
interface IExchangeRates {
    // Structs
    struct RateAndUpdatedTime {
        uint216 rate;
        uint40 time;
    }

    // Views
    function aggregators(bytes32 currencyKey) external view returns (address);

    function aggregatorWarningFlags() external view returns (address);

    function anyRateIsInvalid(bytes32[] calldata currencyKeys) external view returns (bool);

    function anyRateIsInvalidAtRound(bytes32[] calldata currencyKeys, uint[] calldata roundIds) external view returns (bool);

    function currenciesUsingAggregator(address aggregator) external view returns (bytes32[] memory);

    function effectiveValue(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external view returns (uint value);

    function effectiveValueAndRates(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    )
        external
        view
        returns (
            uint value,
            uint sourceRate,
            uint destinationRate
        );

    function effectiveValueAndRatesAtRound(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        uint roundIdForSrc,
        uint roundIdForDest
    )
        external
        view
        returns (
            uint value,
            uint sourceRate,
            uint destinationRate
        );

    function effectiveAtomicValueAndRates(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    )
        external
        view
        returns (
            uint value,
            uint systemValue,
            uint systemSourceRate,
            uint systemDestinationRate
        );

    function effectiveAtomicValueAndRates(
        IDirectIntegrationManager.ParameterIntegrationSettings calldata sourceSettings,
        uint sourceAmount,
        IDirectIntegrationManager.ParameterIntegrationSettings calldata destinationSettings,
        IDirectIntegrationManager.ParameterIntegrationSettings calldata usdSettings
    )
        external
        view
        returns (
            uint value,
            uint systemValue,
            uint systemSourceRate,
            uint systemDestinationRate
        );

    function getCurrentRoundId(bytes32 currencyKey) external view returns (uint);

    function getLastRoundIdBeforeElapsedSecs(
        bytes32 currencyKey,
        uint startingRoundId,
        uint startingTimestamp,
        uint timediff
    ) external view returns (uint);

    function lastRateUpdateTimes(bytes32 currencyKey) external view returns (uint256);

    function rateAndTimestampAtRound(bytes32 currencyKey, uint roundId) external view returns (uint rate, uint time);

    function rateAndUpdatedTime(bytes32 currencyKey) external view returns (uint rate, uint time);

    function rateAndInvalid(bytes32 currencyKey) external view returns (uint rate, bool isInvalid);

    function rateForCurrency(bytes32 currencyKey) external view returns (uint);

    function rateIsFlagged(bytes32 currencyKey) external view returns (bool);

    function rateIsInvalid(bytes32 currencyKey) external view returns (bool);

    function rateIsStale(bytes32 currencyKey) external view returns (bool);

    function rateStalePeriod() external view returns (uint);

    function ratesAndUpdatedTimeForCurrencyLastNRounds(
        bytes32 currencyKey,
        uint numRounds,
        uint roundId
    ) external view returns (uint[] memory rates, uint[] memory times);

    function ratesAndInvalidForCurrencies(bytes32[] calldata currencyKeys)
        external
        view
        returns (uint[] memory rates, bool anyRateInvalid);

    function ratesForCurrencies(bytes32[] calldata currencyKeys) external view returns (uint[] memory);

    function synthTooVolatileForAtomicExchange(bytes32 currencyKey) external view returns (bool);

    function synthTooVolatileForAtomicExchange(IDirectIntegrationManager.ParameterIntegrationSettings calldata settings)
        external
        view
        returns (bool);

    function rateWithSafetyChecks(bytes32 currencyKey)
        external
        returns (
            uint rate,
            bool broken,
            bool invalid
        );
}


// https://docs.synthetix.io/contracts/source/interfaces/ICircuitBreaker
interface ICircuitBreaker {
    // Views
    function isInvalid(address oracleAddress, uint value) external view returns (bool);

    function priceDeviationThresholdFactor() external view returns (uint);

    function isDeviationAboveThreshold(uint base, uint comparison) external view returns (bool);

    function lastValue(address oracleAddress) external view returns (uint);

    function circuitBroken(address oracleAddress) external view returns (bool);

    // Mutative functions
    function resetLastValue(address[] calldata oracleAddresses, uint[] calldata values) external;

    function probeCircuitBreaker(address oracleAddress, uint value) external returns (bool circuitBroken);
}


// https://docs.synthetix.io/contracts/source/interfaces/ihasbalance
interface IHasBalance {
    // Views
    function balanceOf(address account) external view returns (uint);
}


// https://docs.synthetix.io/contracts/source/interfaces/ierc20
interface IERC20 {
    // ERC20 Optional Views
    function name() external view returns (string memory);

    function symbol() external view returns (string memory);

    function decimals() external view returns (uint8);

    // Views
    function totalSupply() external view returns (uint);

    function balanceOf(address owner) external view returns (uint);

    function allowance(address owner, address spender) external view returns (uint);

    // Mutative functions
    function transfer(address to, uint value) external returns (bool);

    function approve(address spender, uint value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Events
    event Transfer(address indexed from, address indexed to, uint value);

    event Approval(address indexed owner, address indexed spender, uint value);
}


interface ILiquidator {
    // Views
    function issuanceRatio() external view returns (uint);

    function liquidationDelay() external view returns (uint);

    function liquidationRatio() external view returns (uint);

    function liquidationEscrowDuration() external view returns (uint);

    function liquidationPenalty() external view returns (uint);

    function selfLiquidationPenalty() external view returns (uint);

    function liquidateReward() external view returns (uint);

    function flagReward() external view returns (uint);

    function liquidationCollateralRatio() external view returns (uint);

    function getLiquidationDeadlineForAccount(address account) external view returns (uint);

    function getLiquidationCallerForAccount(address account) external view returns (address);

    function isLiquidationOpen(address account, bool isSelfLiquidation) external view returns (bool);

    function isLiquidationDeadlinePassed(address account) external view returns (bool);

    function calculateAmountToFixCollateral(
        uint debtBalance,
        uint collateral,
        uint penalty
    ) external view returns (uint);

    function liquidationAmounts(address account, bool isSelfLiquidation)
        external
        view
        returns (
            uint totalRedeemed,
            uint debtToRemove,
            uint escrowToLiquidate,
            uint initialDebtBalance
        );

    // Mutative Functions
    function flagAccountForLiquidation(address account) external;

    // Restricted: used internally to Synthetix contracts
    function removeAccountInLiquidation(address account) external;

    function checkAndRemoveAccountInLiquidation(address account) external;
}


interface ILiquidatorRewards {
    // Views

    function earned(address account) external view returns (uint256);

    // Mutative

    function getReward(address account) external;

    function notifyRewardAmount(uint256 reward) external;

    function updateEntry(address account) external;
}


interface ISynthRedeemer {
    // Rate of redemption - 0 for none
    function redemptions(address synthProxy) external view returns (uint redeemRate);

    // sUSD balance of deprecated token holder
    function balanceOf(IERC20 synthProxy, address account) external view returns (uint balanceOfInsUSD);

    // Full sUSD supply of token
    function totalSupply(IERC20 synthProxy) external view returns (uint totalSupplyInsUSD);

    function redeem(IERC20 synthProxy) external;

    function redeemAll(IERC20[] calldata synthProxies) external;

    function redeemPartial(IERC20 synthProxy, uint amountOfSynth) external;

    // Restricted to Issuer
    function deprecate(IERC20 synthProxy, uint rateToRedeem) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/isystemstatus
interface ISystemStatus {
    struct Status {
        bool canSuspend;
        bool canResume;
    }

    struct Suspension {
        bool suspended;
        // reason is an integer code,
        // 0 => no reason, 1 => upgrading, 2+ => defined by system usage
        uint248 reason;
    }

    // Views
    function accessControl(bytes32 section, address account) external view returns (bool canSuspend, bool canResume);

    function requireSystemActive() external view;

    function systemSuspended() external view returns (bool);

    function requireIssuanceActive() external view;

    function requireExchangeActive() external view;

    function requireFuturesActive() external view;

    function requireFuturesMarketActive(bytes32 marketKey) external view;

    function requireExchangeBetweenSynthsAllowed(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view;

    function requireSynthActive(bytes32 currencyKey) external view;

    function synthSuspended(bytes32 currencyKey) external view returns (bool);

    function requireSynthsActive(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey) external view;

    function systemSuspension() external view returns (bool suspended, uint248 reason);

    function issuanceSuspension() external view returns (bool suspended, uint248 reason);

    function exchangeSuspension() external view returns (bool suspended, uint248 reason);

    function futuresSuspension() external view returns (bool suspended, uint248 reason);

    function synthExchangeSuspension(bytes32 currencyKey) external view returns (bool suspended, uint248 reason);

    function synthSuspension(bytes32 currencyKey) external view returns (bool suspended, uint248 reason);

    function futuresMarketSuspension(bytes32 marketKey) external view returns (bool suspended, uint248 reason);

    function getSynthExchangeSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory exchangeSuspensions, uint256[] memory reasons);

    function getSynthSuspensions(bytes32[] calldata synths)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons);

    function getFuturesMarketSuspensions(bytes32[] calldata marketKeys)
        external
        view
        returns (bool[] memory suspensions, uint256[] memory reasons);

    // Restricted functions
    function suspendIssuance(uint256 reason) external;

    function suspendSynth(bytes32 currencyKey, uint256 reason) external;

    function suspendFuturesMarket(bytes32 marketKey, uint256 reason) external;

    function updateAccessControl(
        bytes32 section,
        address account,
        bool canSuspend,
        bool canResume
    ) external;
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/proxy
contract Proxy is Owned {
    Proxyable public target;

    constructor(address _owner) public Owned(_owner) {}

    function setTarget(Proxyable _target) external onlyOwner {
        target = _target;
        emit TargetUpdated(_target);
    }

    function _emit(
        bytes calldata callData,
        uint numTopics,
        bytes32 topic1,
        bytes32 topic2,
        bytes32 topic3,
        bytes32 topic4
    ) external onlyTarget {
        uint size = callData.length;
        bytes memory _callData = callData;

        assembly {
            /* The first 32 bytes of callData contain its length (as specified by the abi).
             * Length is assumed to be a uint256 and therefore maximum of 32 bytes
             * in length. It is also leftpadded to be a multiple of 32 bytes.
             * This means moving call_data across 32 bytes guarantees we correctly access
             * the data itself. */
            switch numTopics
                case 0 {
                    log0(add(_callData, 32), size)
                }
                case 1 {
                    log1(add(_callData, 32), size, topic1)
                }
                case 2 {
                    log2(add(_callData, 32), size, topic1, topic2)
                }
                case 3 {
                    log3(add(_callData, 32), size, topic1, topic2, topic3)
                }
                case 4 {
                    log4(add(_callData, 32), size, topic1, topic2, topic3, topic4)
                }
        }
    }

    // solhint-disable no-complex-fallback
    function() external payable {
        // Mutable call setting Proxyable.messageSender as this is using call not delegatecall
        target.setMessageSender(msg.sender);

        assembly {
            let free_ptr := mload(0x40)
            calldatacopy(free_ptr, 0, calldatasize)

            /* We must explicitly forward ether to the underlying contract as well. */
            let result := call(gas, sload(target_slot), callvalue, free_ptr, calldatasize, 0, 0)
            returndatacopy(free_ptr, 0, returndatasize)

            if iszero(result) {
                revert(free_ptr, returndatasize)
            }
            return(free_ptr, returndatasize)
        }
    }

    modifier onlyTarget {
        require(Proxyable(msg.sender) == target, "Must be proxy target");
        _;
    }

    event TargetUpdated(Proxyable newTarget);
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/proxyable
contract Proxyable is Owned {
    // This contract should be treated like an abstract contract

    /* The proxy this contract exists behind. */
    Proxy public proxy;

    /* The caller of the proxy, passed through to this contract.
     * Note that every function using this member must apply the onlyProxy or
     * optionalProxy modifiers, otherwise their invocations can use stale values. */
    address public messageSender;

    constructor(address payable _proxy) internal {
        // This contract is abstract, and thus cannot be instantiated directly
        require(owner != address(0), "Owner must be set");

        proxy = Proxy(_proxy);
        emit ProxyUpdated(_proxy);
    }

    function setProxy(address payable _proxy) external onlyOwner {
        proxy = Proxy(_proxy);
        emit ProxyUpdated(_proxy);
    }

    function setMessageSender(address sender) external onlyProxy {
        messageSender = sender;
    }

    modifier onlyProxy {
        _onlyProxy();
        _;
    }

    function _onlyProxy() private view {
        require(Proxy(msg.sender) == proxy, "Only the proxy can call");
    }

    modifier optionalProxy {
        _optionalProxy();
        _;
    }

    function _optionalProxy() private {
        if (Proxy(msg.sender) != proxy && messageSender != msg.sender) {
            messageSender = msg.sender;
        }
    }

    modifier optionalProxy_onlyOwner {
        _optionalProxy_onlyOwner();
        _;
    }

    // solhint-disable-next-line func-name-mixedcase
    function _optionalProxy_onlyOwner() private {
        if (Proxy(msg.sender) != proxy && messageSender != msg.sender) {
            messageSender = msg.sender;
        }
        require(messageSender == owner, "Owner only function");
    }

    event ProxyUpdated(address proxyAddress);
}


interface AggregatorInterface {
  function latestAnswer() external view returns (int256);
  function latestTimestamp() external view returns (uint256);
  function latestRound() external view returns (uint256);
  function getAnswer(uint256 roundId) external view returns (int256);
  function getTimestamp(uint256 roundId) external view returns (uint256);

  event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 timestamp);
  event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}


interface AggregatorV3Interface {

  function decimals() external view returns (uint8);
  function description() external view returns (string memory);
  function version() external view returns (uint256);

  // getRoundData and latestRoundData should both raise "No data present"
  // if they do not have data to report, instead of returning unset values
  // which could be misinterpreted as actual reported values.
  function getRoundData(uint80 _roundId)
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
  function latestRoundData()
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );

}


/**
 * @title The V2 & V3 Aggregator Interface
 * @notice Solidity V0.5 does not allow interfaces to inherit from other
 * interfaces so this contract is a combination of v0.5 AggregatorInterface.sol
 * and v0.5 AggregatorV3Interface.sol.
 */
interface AggregatorV2V3Interface {
  //
  // V2 Interface:
  //
  function latestAnswer() external view returns (int256);
  function latestTimestamp() external view returns (uint256);
  function latestRound() external view returns (uint256);
  function getAnswer(uint256 roundId) external view returns (int256);
  function getTimestamp(uint256 roundId) external view returns (uint256);

  event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 timestamp);
  event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);

  //
  // V3 Interface:
  //
  function decimals() external view returns (uint8);
  function description() external view returns (string memory);
  function version() external view returns (uint256);

  // getRoundData and latestRoundData should both raise "No data present"
  // if they do not have data to report, instead of returning unset values
  // which could be misinterpreted as actual reported values.
  function getRoundData(uint80 _roundId)
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
  function latestRoundData()
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );

}


// Inheritance


// Libraries


// Internal references


interface IProxy {
    function target() external view returns (address);
}

interface IIssuerInternalDebtCache {
    function updateCachedSynthDebtWithRate(bytes32 currencyKey, uint currencyRate) external;

    function updateCachedSynthDebtsWithRates(bytes32[] calldata currencyKeys, uint[] calldata currencyRates) external;

    function updateDebtCacheValidity(bool currentlyInvalid) external;

    function totalNonSnxBackedDebt() external view returns (uint excludedDebt, bool isInvalid);

    function cacheInfo()
        external
        view
        returns (
            uint cachedDebt,
            uint timestamp,
            bool isInvalid,
            bool isStale
        );

    function updateCachedsUSDDebt(int amount) external;
}

// https://docs.synthetix.io/contracts/source/contracts/issuer
contract Issuer is Owned, MixinSystemSettings, IIssuer {
    using SafeMath for uint;
    using SafeDecimalMath for uint;

    bytes32 public constant CONTRACT_NAME = "Issuer";

    // Available Synths which can be used with the system
    ISynth[] public availableSynths;
    mapping(bytes32 => ISynth) public synths;
    mapping(address => bytes32) public synthsByAddress;

    /* ========== ENCODED NAMES ========== */

    bytes32 internal constant sUSD = "sUSD";
    bytes32 internal constant SNX = "SNX";

    // Flexible storage names

    bytes32 internal constant LAST_ISSUE_EVENT = "lastIssueEvent";

    /* ========== ADDRESS RESOLVER CONFIGURATION ========== */

    bytes32 private constant CONTRACT_SYNTHETIX = "Synthetix";
    bytes32 private constant CONTRACT_EXCHANGER = "Exchanger";
    bytes32 private constant CONTRACT_EXRATES = "ExchangeRates";
    bytes32 private constant CONTRACT_CIRCUIT_BREAKER = "CircuitBreaker";
    bytes32 private constant CONTRACT_SYNTHETIXDEBTSHARE = "SynthetixDebtShare";
    bytes32 private constant CONTRACT_FEEPOOL = "FeePool";
    bytes32 private constant CONTRACT_DELEGATEAPPROVALS = "DelegateApprovals";
    bytes32 private constant CONTRACT_REWARDESCROW_V2 = "RewardEscrowV2";
    bytes32 private constant CONTRACT_LIQUIDATOR = "Liquidator";
    bytes32 private constant CONTRACT_LIQUIDATOR_REWARDS = "LiquidatorRewards";
    bytes32 private constant CONTRACT_DEBTCACHE = "DebtCache";
    bytes32 private constant CONTRACT_SYNTHREDEEMER = "SynthRedeemer";
    bytes32 private constant CONTRACT_SYNTHETIXBRIDGETOOPTIMISM = "SynthetixBridgeToOptimism";
    bytes32 private constant CONTRACT_SYNTHETIXBRIDGETOBASE = "SynthetixBridgeToBase";

    bytes32 private constant CONTRACT_EXT_AGGREGATOR_ISSUED_SYNTHS = "ext:AggregatorIssuedSynths";
    bytes32 private constant CONTRACT_EXT_AGGREGATOR_DEBT_RATIO = "ext:AggregatorDebtRatio";

    constructor(address _owner, address _resolver) public Owned(_owner) MixinSystemSettings(_resolver) {}

    /* ========== VIEWS ========== */
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {
        bytes32[] memory existingAddresses = MixinSystemSettings.resolverAddressesRequired();
        bytes32[] memory newAddresses = new bytes32[](14);
        newAddresses[0] = CONTRACT_SYNTHETIX;
        newAddresses[1] = CONTRACT_EXCHANGER;
        newAddresses[2] = CONTRACT_EXRATES;
        newAddresses[3] = CONTRACT_CIRCUIT_BREAKER;
        newAddresses[4] = CONTRACT_SYNTHETIXDEBTSHARE;
        newAddresses[5] = CONTRACT_FEEPOOL;
        newAddresses[6] = CONTRACT_DELEGATEAPPROVALS;
        newAddresses[7] = CONTRACT_REWARDESCROW_V2;
        newAddresses[8] = CONTRACT_LIQUIDATOR;
        newAddresses[9] = CONTRACT_LIQUIDATOR_REWARDS;
        newAddresses[10] = CONTRACT_DEBTCACHE;
        newAddresses[11] = CONTRACT_SYNTHREDEEMER;
        newAddresses[12] = CONTRACT_EXT_AGGREGATOR_ISSUED_SYNTHS;
        newAddresses[13] = CONTRACT_EXT_AGGREGATOR_DEBT_RATIO;
        return combineArrays(existingAddresses, newAddresses);
    }

    function synthetixERC20() internal view returns (IERC20) {
        return IERC20(requireAndGetAddress(CONTRACT_SYNTHETIX));
    }

    function exchanger() internal view returns (IExchanger) {
        return IExchanger(requireAndGetAddress(CONTRACT_EXCHANGER));
    }

    function exchangeRates() internal view returns (IExchangeRates) {
        return IExchangeRates(requireAndGetAddress(CONTRACT_EXRATES));
    }

    function circuitBreaker() internal view returns (ICircuitBreaker) {
        return ICircuitBreaker(requireAndGetAddress(CONTRACT_CIRCUIT_BREAKER));
    }

    function synthetixDebtShare() internal view returns (ISynthetixDebtShare) {
        return ISynthetixDebtShare(requireAndGetAddress(CONTRACT_SYNTHETIXDEBTSHARE));
    }

    function liquidator() internal view returns (ILiquidator) {
        return ILiquidator(requireAndGetAddress(CONTRACT_LIQUIDATOR));
    }

    function liquidatorRewards() internal view returns (ILiquidatorRewards) {
        return ILiquidatorRewards(requireAndGetAddress(CONTRACT_LIQUIDATOR_REWARDS));
    }

    function delegateApprovals() internal view returns (IDelegateApprovals) {
        return IDelegateApprovals(requireAndGetAddress(CONTRACT_DELEGATEAPPROVALS));
    }

    function rewardEscrowV2() internal view returns (IHasBalance) {
        return IHasBalance(requireAndGetAddress(CONTRACT_REWARDESCROW_V2));
    }

    function debtCache() internal view returns (IIssuerInternalDebtCache) {
        return IIssuerInternalDebtCache(requireAndGetAddress(CONTRACT_DEBTCACHE));
    }

    function synthRedeemer() internal view returns (ISynthRedeemer) {
        return ISynthRedeemer(requireAndGetAddress(CONTRACT_SYNTHREDEEMER));
    }

    function allNetworksDebtInfo()
        public
        view
        returns (
            uint256 debt,
            uint256 sharesSupply,
            bool isStale
        )
    {
        (, int256 rawIssuedSynths, , uint issuedSynthsUpdatedAt, ) =
            _latestRoundData(requireAndGetAddress(CONTRACT_EXT_AGGREGATOR_ISSUED_SYNTHS));

        (uint rawRatio, uint ratioUpdatedAt) = _rawDebtRatioAndUpdatedAt();

        debt = uint(rawIssuedSynths);
        sharesSupply = rawRatio == 0 ? 0 : debt.divideDecimalRoundPrecise(uint(rawRatio));

        uint stalePeriod = getRateStalePeriod();

        isStale =
            stalePeriod < block.timestamp &&
            (block.timestamp - stalePeriod > issuedSynthsUpdatedAt || block.timestamp - stalePeriod > ratioUpdatedAt);
    }

    function issuanceRatio() external view returns (uint) {
        return getIssuanceRatio();
    }

    function _rateAndInvalid(bytes32 currencyKey) internal view returns (uint, bool) {
        return exchangeRates().rateAndInvalid(currencyKey);
    }

    function _latestRoundData(address aggregator)
        internal
        view
        returns (
            uint80,
            int256,
            uint256,
            uint256,
            uint80
        )
    {
        return AggregatorV2V3Interface(aggregator).latestRoundData();
    }

    function _rawDebtRatioAndUpdatedAt() internal view returns (uint, uint) {
        (, int256 rawRatioInt, , uint ratioUpdatedAt, ) =
            _latestRoundData(requireAndGetAddress(CONTRACT_EXT_AGGREGATOR_DEBT_RATIO));
        return (uint(rawRatioInt), ratioUpdatedAt);
    }

    function _sharesForDebt(uint debtAmount) internal view returns (uint) {
        (uint rawRatio, ) = _rawDebtRatioAndUpdatedAt();
        return rawRatio == 0 ? 0 : debtAmount.divideDecimalRoundPrecise(rawRatio);
    }

    function _debtForShares(uint sharesAmount) internal view returns (uint) {
        (uint rawRatio, ) = _rawDebtRatioAndUpdatedAt();
        return sharesAmount.multiplyDecimalRoundPrecise(rawRatio);
    }

    function _availableCurrencyKeysWithOptionalSNX(bool withSNX) internal view returns (bytes32[] memory) {
        bytes32[] memory currencyKeys = new bytes32[](availableSynths.length + (withSNX ? 1 : 0));

        for (uint i = 0; i < availableSynths.length; i++) {
            currencyKeys[i] = synthsByAddress[address(availableSynths[i])];
        }

        if (withSNX) {
            currencyKeys[availableSynths.length] = SNX;
        }

        return currencyKeys;
    }

    // Returns the total value of the debt pool in currency specified by `currencyKey`.
    // To return only the SNX-backed debt, set `excludeCollateral` to true.
    function _totalIssuedSynths(bytes32 currencyKey, bool excludeCollateral)
        internal
        view
        returns (uint totalIssued, bool anyRateIsInvalid)
    {
        (uint debt, , bool cacheIsInvalid, bool cacheIsStale) = debtCache().cacheInfo();
        anyRateIsInvalid = cacheIsInvalid || cacheIsStale;

        // Add total issued synths from non snx collateral back into the total if not excluded
        if (!excludeCollateral) {
            (uint nonSnxDebt, bool invalid) = debtCache().totalNonSnxBackedDebt();
            debt = debt.add(nonSnxDebt);
            anyRateIsInvalid = anyRateIsInvalid || invalid;
        }

        if (currencyKey == sUSD) {
            return (debt, anyRateIsInvalid);
        }

        (uint currencyRate, bool currencyRateInvalid) = _rateAndInvalid(currencyKey);
        return (debt.divideDecimalRound(currencyRate), anyRateIsInvalid || currencyRateInvalid);
    }

    function _debtBalanceOfAndTotalDebt(uint debtShareBalance, bytes32 currencyKey)
        internal
        view
        returns (
            uint debtBalance,
            uint totalSystemValue,
            bool anyRateIsInvalid
        )
    {
        // What's the total value of the system excluding ETH backed synths in their requested currency?
        (uint snxBackedAmount, , bool debtInfoStale) = allNetworksDebtInfo();

        if (debtShareBalance == 0) {
            return (0, snxBackedAmount, debtInfoStale);
        }

        // existing functionality requires for us to convert into the exchange rate specified by `currencyKey`
        (uint currencyRate, bool currencyRateInvalid) = _rateAndInvalid(currencyKey);

        debtBalance = _debtForShares(debtShareBalance).divideDecimalRound(currencyRate);
        totalSystemValue = snxBackedAmount;

        anyRateIsInvalid = currencyRateInvalid || debtInfoStale;
    }

    function _canBurnSynths(address account) internal view returns (bool) {
        return now >= _lastIssueEvent(account).add(getMinimumStakeTime());
    }

    function _lastIssueEvent(address account) internal view returns (uint) {
        //  Get the timestamp of the last issue this account made
        return flexibleStorage().getUIntValue(CONTRACT_NAME, keccak256(abi.encodePacked(LAST_ISSUE_EVENT, account)));
    }

    function _remainingIssuableSynths(address _issuer)
        internal
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt,
            bool anyRateIsInvalid
        )
    {
        (alreadyIssued, totalSystemDebt, anyRateIsInvalid) = _debtBalanceOfAndTotalDebt(
            synthetixDebtShare().balanceOf(_issuer),
            sUSD
        );
        (uint issuable, bool isInvalid) = _maxIssuableSynths(_issuer);
        maxIssuable = issuable;
        anyRateIsInvalid = anyRateIsInvalid || isInvalid;

        if (alreadyIssued >= maxIssuable) {
            maxIssuable = 0;
        } else {
            maxIssuable = maxIssuable.sub(alreadyIssued);
        }
    }

    function _snxToUSD(uint amount, uint snxRate) internal pure returns (uint) {
        return amount.multiplyDecimalRound(snxRate);
    }

    function _usdToSnx(uint amount, uint snxRate) internal pure returns (uint) {
        return amount.divideDecimalRound(snxRate);
    }

    function _maxIssuableSynths(address _issuer) internal view returns (uint, bool) {
        // What is the value of their SNX balance in sUSD
        (uint snxRate, bool isInvalid) = _rateAndInvalid(SNX);
        uint destinationValue = _snxToUSD(_collateral(_issuer), snxRate);

        // They're allowed to issue up to issuanceRatio of that value
        return (destinationValue.multiplyDecimal(getIssuanceRatio()), isInvalid);
    }

    function _collateralisationRatio(address _issuer) internal view returns (uint, bool) {
        uint totalOwnedSynthetix = _collateral(_issuer);

        (uint debtBalance, , bool anyRateIsInvalid) =
            _debtBalanceOfAndTotalDebt(synthetixDebtShare().balanceOf(_issuer), SNX);

        // it's more gas intensive to put this check here if they have 0 SNX, but it complies with the interface
        if (totalOwnedSynthetix == 0) return (0, anyRateIsInvalid);

        return (debtBalance.divideDecimalRound(totalOwnedSynthetix), anyRateIsInvalid);
    }

    function _collateral(address account) internal view returns (uint) {
        return
            synthetixERC20().balanceOf(account).add(rewardEscrowV2().balanceOf(account)).add(
                liquidatorRewards().earned(account)
            );
    }

    function minimumStakeTime() external view returns (uint) {
        return getMinimumStakeTime();
    }

    function canBurnSynths(address account) external view returns (bool) {
        return _canBurnSynths(account);
    }

    function availableCurrencyKeys() external view returns (bytes32[] memory) {
        return _availableCurrencyKeysWithOptionalSNX(false);
    }

    function availableSynthCount() external view returns (uint) {
        return availableSynths.length;
    }

    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid) {
        (, anyRateInvalid) = exchangeRates().ratesAndInvalidForCurrencies(_availableCurrencyKeysWithOptionalSNX(true));
    }

    function totalIssuedSynths(bytes32 currencyKey, bool excludeOtherCollateral) external view returns (uint totalIssued) {
        (totalIssued, ) = _totalIssuedSynths(currencyKey, excludeOtherCollateral);
    }

    function lastIssueEvent(address account) external view returns (uint) {
        return _lastIssueEvent(account);
    }

    function collateralisationRatio(address _issuer) external view returns (uint cratio) {
        (cratio, ) = _collateralisationRatio(_issuer);
    }

    function collateralisationRatioAndAnyRatesInvalid(address _issuer)
        external
        view
        returns (uint cratio, bool anyRateIsInvalid)
    {
        return _collateralisationRatio(_issuer);
    }

    function collateral(address account) external view returns (uint) {
        return _collateral(account);
    }

    function debtBalanceOf(address _issuer, bytes32 currencyKey) external view returns (uint debtBalance) {
        ISynthetixDebtShare sds = synthetixDebtShare();

        // What was their initial debt ownership?
        uint debtShareBalance = sds.balanceOf(_issuer);

        // If it's zero, they haven't issued, and they have no debt.
        if (debtShareBalance == 0) return 0;

        (debtBalance, , ) = _debtBalanceOfAndTotalDebt(debtShareBalance, currencyKey);
    }

    function remainingIssuableSynths(address _issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        )
    {
        (maxIssuable, alreadyIssued, totalSystemDebt, ) = _remainingIssuableSynths(_issuer);
    }

    function maxIssuableSynths(address _issuer) external view returns (uint) {
        (uint maxIssuable, ) = _maxIssuableSynths(_issuer);
        return maxIssuable;
    }

    function transferableSynthetixAndAnyRateIsInvalid(address account, uint balance)
        external
        view
        returns (uint transferable, bool anyRateIsInvalid)
    {
        // How many SNX do they have, excluding escrow?
        // Note: We're excluding escrow here because we're interested in their transferable amount
        // and escrowed SNX are not transferable.

        // How many of those will be locked by the amount they've issued?
        // Assuming issuance ratio is 20%, then issuing 20 SNX of value would require
        // 100 SNX to be locked in their wallet to maintain their collateralisation ratio
        // The locked synthetix value can exceed their balance.
        uint debtBalance;
        (debtBalance, , anyRateIsInvalid) = _debtBalanceOfAndTotalDebt(synthetixDebtShare().balanceOf(account), SNX);
        uint lockedSynthetixValue = debtBalance.divideDecimalRound(getIssuanceRatio());

        // If we exceed the balance, no SNX are transferable, otherwise the difference is.
        if (lockedSynthetixValue >= balance) {
            transferable = 0;
        } else {
            transferable = balance.sub(lockedSynthetixValue);
        }
    }

    function getSynths(bytes32[] calldata currencyKeys) external view returns (ISynth[] memory) {
        uint numKeys = currencyKeys.length;
        ISynth[] memory addresses = new ISynth[](numKeys);

        for (uint i = 0; i < numKeys; i++) {
            addresses[i] = synths[currencyKeys[i]];
        }

        return addresses;
    }

    /// @notice Provide the results that would be returned by the mutative liquidateAccount() method (that's reserved to Synthetix)
    /// @param account The account to be liquidated
    /// @param isSelfLiquidation boolean to determine if this is a forced or self-invoked liquidation
    /// @return totalRedeemed the total amount of collateral (SNX) to redeem (liquid and escrow)
    /// @return debtToRemove the amount of debt (sUSD) to burn in order to fix the account's c-ratio
    /// @return escrowToLiquidate the amount of escrow SNX that will be revoked during liquidation
    /// @return initialDebtBalance the amount of initial (sUSD) debt the account has
    function liquidationAmounts(address account, bool isSelfLiquidation)
        external
        view
        returns (
            uint totalRedeemed,
            uint debtToRemove,
            uint escrowToLiquidate,
            uint initialDebtBalance
        )
    {
        return _liquidationAmounts(account, isSelfLiquidation);
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    function _addSynth(ISynth synth) internal {
        bytes32 currencyKey = synth.currencyKey();
        require(synths[currencyKey] == ISynth(0), "Synth exists");
        require(synthsByAddress[address(synth)] == bytes32(0), "Synth address already exists");

        availableSynths.push(synth);
        synths[currencyKey] = synth;
        synthsByAddress[address(synth)] = currencyKey;

        emit SynthAdded(currencyKey, address(synth));
    }

    function addSynth(ISynth synth) external onlyOwner {
        _addSynth(synth);
        // Invalidate the cache to force a snapshot to be recomputed. If a synth were to be added
        // back to the system and it still somehow had cached debt, this would force the value to be
        // updated.
        debtCache().updateDebtCacheValidity(true);
    }

    function addSynths(ISynth[] calldata synthsToAdd) external onlyOwner {
        uint numSynths = synthsToAdd.length;
        for (uint i = 0; i < numSynths; i++) {
            _addSynth(synthsToAdd[i]);
        }

        // Invalidate the cache to force a snapshot to be recomputed.
        debtCache().updateDebtCacheValidity(true);
    }

    function _removeSynth(bytes32 currencyKey) internal {
        address synthToRemove = address(synths[currencyKey]);
        require(synthToRemove != address(0), "Synth does not exist");
        require(currencyKey != sUSD, "Cannot remove synth");

        uint synthSupply = IERC20(synthToRemove).totalSupply();

        if (synthSupply > 0) {
            (uint amountOfsUSD, uint rateToRedeem, ) =
                exchangeRates().effectiveValueAndRates(currencyKey, synthSupply, "sUSD");
            require(rateToRedeem > 0, "Cannot remove without rate");
            ISynthRedeemer _synthRedeemer = synthRedeemer();
            synths[sUSD].issue(address(_synthRedeemer), amountOfsUSD);
            // ensure the debt cache is aware of the new sUSD issued
            debtCache().updateCachedsUSDDebt(SafeCast.toInt256(amountOfsUSD));
            _synthRedeemer.deprecate(IERC20(address(Proxyable(synthToRemove).proxy())), rateToRedeem);
        }

        // Remove the synth from the availableSynths array.
        for (uint i = 0; i < availableSynths.length; i++) {
            if (address(availableSynths[i]) == synthToRemove) {
                delete availableSynths[i];

                // Copy the last synth into the place of the one we just deleted
                // If there's only one synth, this is synths[0] = synths[0].
                // If we're deleting the last one, it's also a NOOP in the same way.
                availableSynths[i] = availableSynths[availableSynths.length - 1];

                // Decrease the size of the array by one.
                availableSynths.length--;

                break;
            }
        }

        // And remove it from the synths mapping
        delete synthsByAddress[synthToRemove];
        delete synths[currencyKey];

        emit SynthRemoved(currencyKey, synthToRemove);
    }

    function removeSynth(bytes32 currencyKey) external onlyOwner {
        // Remove its contribution from the debt pool snapshot, and
        // invalidate the cache to force a new snapshot.
        IIssuerInternalDebtCache cache = debtCache();
        cache.updateCachedSynthDebtWithRate(currencyKey, 0);
        cache.updateDebtCacheValidity(true);

        _removeSynth(currencyKey);
    }

    function removeSynths(bytes32[] calldata currencyKeys) external onlyOwner {
        uint numKeys = currencyKeys.length;

        // Remove their contributions from the debt pool snapshot, and
        // invalidate the cache to force a new snapshot.
        IIssuerInternalDebtCache cache = debtCache();
        uint[] memory zeroRates = new uint[](numKeys);
        cache.updateCachedSynthDebtsWithRates(currencyKeys, zeroRates);
        cache.updateDebtCacheValidity(true);

        for (uint i = 0; i < numKeys; i++) {
            _removeSynth(currencyKeys[i]);
        }
    }

    function issueSynthsWithoutDebt(
        bytes32 currencyKey,
        address to,
        uint amount
    ) external onlyTrustedMinters returns (bool rateInvalid) {
        require(address(synths[currencyKey]) != address(0), "synth doesn't exist");
        require(amount > 0, "cannot issue 0 synths");

        // record issue timestamp
        _setLastIssueEvent(to);

        // Create their synths
        synths[currencyKey].issue(to, amount);

        // Account for the issued debt in the cache
        (uint rate, bool rateInvalid) = _rateAndInvalid(currencyKey);
        debtCache().updateCachedsUSDDebt(SafeCast.toInt256(amount.multiplyDecimal(rate)));

        // returned so that the caller can decide what to do if the rate is invalid
        return rateInvalid;
    }

    function burnSynthsWithoutDebt(
        bytes32 currencyKey,
        address from,
        uint amount
    ) external onlyTrustedMinters returns (bool rateInvalid) {
        require(address(synths[currencyKey]) != address(0), "synth doesn't exist");
        require(amount > 0, "cannot issue 0 synths");

        exchanger().settle(from, currencyKey);

        // Burn some synths
        synths[currencyKey].burn(from, amount);

        // Account for the burnt debt in the cache. If rate is invalid, the user won't be able to exchange
        (uint rate, bool rateInvalid) = _rateAndInvalid(currencyKey);
        debtCache().updateCachedsUSDDebt(-SafeCast.toInt256(amount.multiplyDecimal(rate)));

        // returned so that the caller can decide what to do if the rate is invalid
        return rateInvalid;
    }

    /**
     * Function used to migrate balances from the CollateralShort contract
     * @param short The address of the CollateralShort contract to be upgraded
     * @param amount The amount of sUSD collateral to be burnt
     */
    function upgradeCollateralShort(address short, uint amount) external onlyOwner {
        require(short == resolver.getAddress("CollateralShortLegacy"), "wrong address");
        require(amount > 0, "cannot burn 0 synths");

        exchanger().settle(short, sUSD);

        synths[sUSD].burn(short, amount);
    }

    function issueSynths(address from, uint amount) external onlySynthetix {
        require(amount > 0, "cannot issue 0 synths");

        _issueSynths(from, amount, false);
    }

    function issueMaxSynths(address from) external onlySynthetix {
        _issueSynths(from, 0, true);
    }

    function issueSynthsOnBehalf(
        address issueForAddress,
        address from,
        uint amount
    ) external onlySynthetix {
        _requireCanIssueOnBehalf(issueForAddress, from);
        _issueSynths(issueForAddress, amount, false);
    }

    function issueMaxSynthsOnBehalf(address issueForAddress, address from) external onlySynthetix {
        _requireCanIssueOnBehalf(issueForAddress, from);
        _issueSynths(issueForAddress, 0, true);
    }

    function burnSynths(address from, uint amount) external onlySynthetix {
        _voluntaryBurnSynths(from, amount, false);
    }

    function burnSynthsOnBehalf(
        address burnForAddress,
        address from,
        uint amount
    ) external onlySynthetix {
        _requireCanBurnOnBehalf(burnForAddress, from);
        _voluntaryBurnSynths(burnForAddress, amount, false);
    }

    function burnSynthsToTarget(address from) external onlySynthetix {
        _voluntaryBurnSynths(from, 0, true);
    }

    function burnSynthsToTargetOnBehalf(address burnForAddress, address from) external onlySynthetix {
        _requireCanBurnOnBehalf(burnForAddress, from);
        _voluntaryBurnSynths(burnForAddress, 0, true);
    }

    function burnForRedemption(
        address deprecatedSynthProxy,
        address account,
        uint balance
    ) external onlySynthRedeemer {
        ISynth(IProxy(deprecatedSynthProxy).target()).burn(account, balance);
    }

    // SIP-148: Upgraded Liquidation Mechanism
    /// @notice This is where the core internal liquidation logic resides. This function can only be invoked by Synthetix.
    /// Reverts if liquidator().isLiquidationOpen() returns false (e.g. c-ratio is too high, delay hasn't passed,
    ///     account wasn't flagged etc)
    /// @param account The account to be liquidated
    /// @param isSelfLiquidation boolean to determine if this is a forced or self-invoked liquidation
    /// @return totalRedeemed the total amount of collateral (SNX) to redeem (liquid and escrow)
    /// @return debtRemoved the amount of debt (sUSD) to burn in order to fix the account's c-ratio
    /// @return escrowToLiquidate the amount of escrow SNX that will be revoked during liquidation
    function liquidateAccount(address account, bool isSelfLiquidation)
        external
        onlySynthetix
        returns (
            uint totalRedeemed,
            uint debtRemoved,
            uint escrowToLiquidate
        )
    {
        require(liquidator().isLiquidationOpen(account, isSelfLiquidation), "Not open for liquidation");

        // liquidationAmounts checks isLiquidationOpen for the account
        uint initialDebtBalance;
        (totalRedeemed, debtRemoved, escrowToLiquidate, initialDebtBalance) = _liquidationAmounts(
            account,
            isSelfLiquidation
        );

        // Reduce debt shares by amount to liquidate.
        _removeFromDebtRegister(account, debtRemoved, initialDebtBalance);

        if (!isSelfLiquidation) {
            // In case of forced liquidation only, remove the liquidation flag.
            liquidator().removeAccountInLiquidation(account);
        }
        // Note: To remove the flag after self liquidation, burn to target and then call Liquidator.checkAndRemoveAccountInLiquidation(account).
    }

    function _liquidationAmounts(address account, bool isSelfLiquidation)
        internal
        view
        returns (
            uint totalRedeemed,
            uint debtToRemove,
            uint escrowToLiquidate,
            uint debtBalance
        )
    {
        // Get the account's debt balance
        bool anyRateIsInvalid;
        (debtBalance, , anyRateIsInvalid) = _debtBalanceOfAndTotalDebt(synthetixDebtShare().balanceOf(account), sUSD);

        // Get the SNX rate
        (uint snxRate, bool snxRateInvalid) = _rateAndInvalid(SNX);
        _requireRatesNotInvalid(anyRateIsInvalid || snxRateInvalid);

        uint penalty;
        if (isSelfLiquidation) {
            // Get self liquidation penalty
            penalty = getSelfLiquidationPenalty();

            // Calculate the amount of debt to remove and SNX to redeem for a self liquidation
            debtToRemove = liquidator().calculateAmountToFixCollateral(
                debtBalance,
                _snxToUSD(_collateral(account), snxRate),
                penalty
            );

            // Get the minimum values for both totalRedeemed and debtToRemove
            totalRedeemed = _getMinValue(
                _usdToSnx(debtToRemove, snxRate).multiplyDecimal(SafeDecimalMath.unit().add(penalty)),
                synthetixERC20().balanceOf(account)
            );
            debtToRemove = _getMinValue(
                _snxToUSD(totalRedeemed, snxRate).divideDecimal(SafeDecimalMath.unit().add(penalty)),
                debtToRemove
            );

            // Return escrow as zero since it cannot be self liquidated
            return (totalRedeemed, debtToRemove, 0, debtBalance);
        } else {
            // In the case of forced Liquidation
            // Get the forced liquidation penalty and sum of the flag and liquidate rewards.
            penalty = getSnxLiquidationPenalty();
            uint rewardsSum = getLiquidateReward().add(getFlagReward());

            // Get the total USD value of their SNX collateral (including escrow and rewards minus the flag and liquidate rewards)
            uint collateralForAccountUSD = _snxToUSD(_collateral(account).sub(rewardsSum), snxRate);

            // Calculate the amount of debt to remove and the sUSD value of the SNX required to liquidate.
            debtToRemove = liquidator().calculateAmountToFixCollateral(debtBalance, collateralForAccountUSD, penalty);
            uint redeemTarget = _usdToSnx(debtToRemove, snxRate).multiplyDecimal(SafeDecimalMath.unit().add(penalty));

            if (redeemTarget.add(rewardsSum) >= _collateral(account)) {
                // need to wipe out the account
                debtToRemove = debtBalance;
                totalRedeemed = _collateral(account).sub(rewardsSum);
                escrowToLiquidate = rewardEscrowV2().balanceOf(account);
                return (totalRedeemed, debtToRemove, escrowToLiquidate, debtBalance);
            } else {
                // normal forced liquidation
                (totalRedeemed, escrowToLiquidate) = _redeemableCollateralForTarget(account, redeemTarget, rewardsSum);
                return (totalRedeemed, debtToRemove, escrowToLiquidate, debtBalance);
            }
        }
    }

    // SIP-252
    // calculates the amount of SNX that can be force liquidated (redeemed)
    // for the various cases of transferrable & escrowed collateral
    function _redeemableCollateralForTarget(
        address account,
        uint redeemTarget,
        uint rewardsSum
    ) internal view returns (uint totalRedeemed, uint escrowToLiquidate) {
        // The balanceOf here can be considered "transferable" since it's not escrowed,
        // and it is the only SNX that can potentially be transfered if unstaked.
        uint transferable = synthetixERC20().balanceOf(account);
        if (redeemTarget.add(rewardsSum) <= transferable) {
            // transferable is enough
            return (redeemTarget, 0);
        } else {
            // if transferable is not enough
            // need only part of the escrow, add the needed part to redeemed
            escrowToLiquidate = redeemTarget.add(rewardsSum).sub(transferable);
            return (redeemTarget, escrowToLiquidate);
        }
    }

    function _getMinValue(uint x, uint y) internal pure returns (uint) {
        return x < y ? x : y;
    }

    function setCurrentPeriodId(uint128 periodId) external {
        require(msg.sender == requireAndGetAddress(CONTRACT_FEEPOOL), "Must be fee pool");

        ISynthetixDebtShare sds = synthetixDebtShare();

        if (sds.currentPeriodId() < periodId) {
            sds.takeSnapshot(periodId);
        }
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function _requireRatesNotInvalid(bool anyRateIsInvalid) internal pure {
        require(!anyRateIsInvalid, "A synth or SNX rate is invalid");
    }

    function _requireCanIssueOnBehalf(address issueForAddress, address from) internal view {
        require(delegateApprovals().canIssueFor(issueForAddress, from), "Not approved to act on behalf");
    }

    function _requireCanBurnOnBehalf(address burnForAddress, address from) internal view {
        require(delegateApprovals().canBurnFor(burnForAddress, from), "Not approved to act on behalf");
    }

    function _issueSynths(
        address from,
        uint amount,
        bool issueMax
    ) internal {
        if (_verifyCircuitBreakers()) {
            return;
        }

        (uint maxIssuable, , , bool anyRateIsInvalid) = _remainingIssuableSynths(from);
        _requireRatesNotInvalid(anyRateIsInvalid);

        if (!issueMax) {
            require(amount <= maxIssuable, "Amount too large");
        } else {
            amount = maxIssuable;
        }

        // Keep track of the debt they're about to create
        _addToDebtRegister(from, amount);

        // record issue timestamp
        _setLastIssueEvent(from);

        // Create their synths
        synths[sUSD].issue(from, amount);

        // Account for the issued debt in the cache
        debtCache().updateCachedsUSDDebt(SafeCast.toInt256(amount));
    }

    function _burnSynths(
        address debtAccount,
        address burnAccount,
        uint amount,
        uint existingDebt
    ) internal returns (uint amountBurnt) {
        if (_verifyCircuitBreakers()) {
            return 0;
        }

        // liquidation requires sUSD to be already settled / not in waiting period

        // If they're trying to burn more debt than they actually owe, rather than fail the transaction, let's just
        // clear their debt and leave them be.
        amountBurnt = existingDebt < amount ? existingDebt : amount;

        // Remove liquidated debt from the ledger
        _removeFromDebtRegister(debtAccount, amountBurnt, existingDebt);

        // synth.burn does a safe subtraction on balance (so it will revert if there are not enough synths).
        synths[sUSD].burn(burnAccount, amountBurnt);

        // Account for the burnt debt in the cache.
        debtCache().updateCachedsUSDDebt(-SafeCast.toInt256(amountBurnt));
    }

    // If burning to target, `amount` is ignored, and the correct quantity of sUSD is burnt to reach the target
    // c-ratio, allowing fees to be claimed. In this case, pending settlements will be skipped as the user
    // will still have debt remaining after reaching their target.
    function _voluntaryBurnSynths(
        address from,
        uint amount,
        bool burnToTarget
    ) internal {
        if (_verifyCircuitBreakers()) {
            return;
        }

        if (!burnToTarget) {
            // If not burning to target, then burning requires that the minimum stake time has elapsed.
            require(_canBurnSynths(from), "Minimum stake time not reached");
            // First settle anything pending into sUSD as burning or issuing impacts the size of the debt pool
            (, uint refunded, uint numEntriesSettled) = exchanger().settle(from, sUSD);
            if (numEntriesSettled > 0) {
                amount = exchanger().calculateAmountAfterSettlement(from, sUSD, amount, refunded);
            }
        }

        (uint existingDebt, , bool anyRateIsInvalid) =
            _debtBalanceOfAndTotalDebt(synthetixDebtShare().balanceOf(from), sUSD);
        (uint maxIssuableSynthsForAccount, bool snxRateInvalid) = _maxIssuableSynths(from);
        _requireRatesNotInvalid(anyRateIsInvalid || snxRateInvalid);
        require(existingDebt > 0, "No debt to forgive");

        if (burnToTarget) {
            amount = existingDebt.sub(maxIssuableSynthsForAccount);
        }

        uint amountBurnt = _burnSynths(from, from, amount, existingDebt);

        // Check and remove liquidation if existingDebt after burning is <= maxIssuableSynths
        // Issuance ratio is fixed so should remove any liquidations
        if (existingDebt.sub(amountBurnt) <= maxIssuableSynthsForAccount) {
            liquidator().removeAccountInLiquidation(from);
        }
    }

    function _setLastIssueEvent(address account) internal {
        // Set the timestamp of the last issueSynths
        flexibleStorage().setUIntValue(
            CONTRACT_NAME,
            keccak256(abi.encodePacked(LAST_ISSUE_EVENT, account)),
            block.timestamp
        );
    }

    function _addToDebtRegister(address from, uint amount) internal {
        // important: this has to happen before any updates to user's debt shares
        liquidatorRewards().updateEntry(from);

        ISynthetixDebtShare sds = synthetixDebtShare();

        // it is possible (eg in tests, system initialized with extra debt) to have issued debt without any shares issued
        // in which case, the first account to mint gets the debt. yw.
        uint debtShares = _sharesForDebt(amount);
        if (debtShares == 0) {
            sds.mintShare(from, amount);
        } else {
            sds.mintShare(from, debtShares);
        }
    }

    function _removeFromDebtRegister(
        address from,
        uint debtToRemove,
        uint existingDebt
    ) internal {
        // important: this has to happen before any updates to user's debt shares
        liquidatorRewards().updateEntry(from);

        ISynthetixDebtShare sds = synthetixDebtShare();

        uint currentDebtShare = sds.balanceOf(from);

        if (debtToRemove == existingDebt) {
            sds.burnShare(from, currentDebtShare);
        } else {
            uint sharesToRemove = _sharesForDebt(debtToRemove);
            sds.burnShare(from, sharesToRemove < currentDebtShare ? sharesToRemove : currentDebtShare);
        }
    }

    // trips the breaker and returns boolean, where true means the breaker has tripped state
    function _verifyCircuitBreakers() internal returns (bool) {
        address debtRatioAggregator = requireAndGetAddress(CONTRACT_EXT_AGGREGATOR_DEBT_RATIO);
        (, int256 rawRatio, , , ) = AggregatorV2V3Interface(debtRatioAggregator).latestRoundData();
        (, bool broken, ) = exchangeRates().rateWithSafetyChecks(SNX);

        return circuitBreaker().probeCircuitBreaker(debtRatioAggregator, uint(rawRatio)) || broken;
    }

    /* ========== MODIFIERS ========== */
    modifier onlySynthetix() {
        require(msg.sender == address(synthetixERC20()), "Only Synthetix");
        _;
    }

    modifier onlyTrustedMinters() {
        address bridgeL1 = resolver.getAddress(CONTRACT_SYNTHETIXBRIDGETOOPTIMISM);
        address bridgeL2 = resolver.getAddress(CONTRACT_SYNTHETIXBRIDGETOBASE);
        require(msg.sender == bridgeL1 || msg.sender == bridgeL2, "only trusted minters");
        require(bridgeL1 == address(0) || bridgeL2 == address(0), "one minter must be 0x0");
        _;
    }

    function _onlySynthRedeemer() internal view {
        require(msg.sender == address(synthRedeemer()), "Only SynthRedeemer");
    }

    modifier onlySynthRedeemer() {
        _onlySynthRedeemer();
        _;
    }

    /* ========== EVENTS ========== */

    event SynthAdded(bytes32 currencyKey, address synth);
    event SynthRemoved(bytes32 currencyKey, address synth);
}

    

/*
   ____            __   __        __   _
  / __/__ __ ___  / /_ / /  ___  / /_ (_)__ __
 _\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
     /___/

* Synthetix: SynthetixDebtShare.sol
*
* Latest source (may be newer): https://github.com/Synthetixio/synthetix/blob/master/contracts/SynthetixDebtShare.sol
* Docs: https://docs.synthetix.io/contracts/SynthetixDebtShare
*
* Contract Dependencies: 
*	- IAddressResolver
*	- ISynthetixDebtShare
*	- MixinResolver
*	- Owned
* Libraries: 
*	- SafeDecimalMath
*	- SafeMath
*
* MIT License
* ===========
*
* Copyright (c) 2022 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/



pragma solidity ^0.5.16;

// https://docs.synthetix.io/contracts/source/contracts/owned
contract Owned {
    address public owner;
    address public nominatedOwner;

    constructor(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    modifier onlyOwner {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}


// https://docs.synthetix.io/contracts/source/interfaces/isynthetixdebtshare
interface ISynthetixDebtShare {
    // Views

    function currentPeriodId() external view returns (uint128);

    function allowance(address account, address spender) external view returns (uint);

    function balanceOf(address account) external view returns (uint);

    function balanceOfOnPeriod(address account, uint periodId) external view returns (uint);

    function totalSupply() external view returns (uint);

    function sharePercent(address account) external view returns (uint);

    function sharePercentOnPeriod(address account, uint periodId) external view returns (uint);

    // Mutative functions

    function takeSnapshot(uint128 id) external;

    function mintShare(address account, uint256 amount) external;

    function burnShare(address account, uint256 amount) external;

    function approve(address, uint256) external pure returns (bool);

    function transfer(address to, uint256 amount) external pure returns(bool);

    function transferFrom(address from, address to, uint256 amount) external returns(bool);

    function addAuthorizedBroker(address target) external;

    function removeAuthorizedBroker(address target) external;

    function addAuthorizedToSnapshot(address target) external;

    function removeAuthorizedToSnapshot(address target) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/iaddressresolver
interface IAddressResolver {
    function getAddress(bytes32 name) external view returns (address);

    function getSynth(bytes32 key) external view returns (address);

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address);
}


// https://docs.synthetix.io/contracts/source/interfaces/isynth
interface ISynth {
    // Views
    function currencyKey() external view returns (bytes32);

    function transferableSynths(address account) external view returns (uint);

    // Mutative functions
    function transferAndSettle(address to, uint value) external returns (bool);

    function transferFromAndSettle(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Restricted: used internally to Synthetix
    function burn(address account, uint amount) external;

    function issue(address account, uint amount) external;
}


// https://docs.synthetix.io/contracts/source/interfaces/iissuer
interface IIssuer {
    // Views
    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function canBurnSynths(address account) external view returns (bool);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function collateralisationRatioAndAnyRatesInvalid(address _issuer)
        external
        view
        returns (uint cratio, bool anyRateIsInvalid);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint debtBalance);

    function issuanceRatio() external view returns (uint);

    function lastIssueEvent(address account) external view returns (uint);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function minimumStakeTime() external view returns (uint);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function getSynths(bytes32[] calldata currencyKeys) external view returns (ISynth[] memory);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey, bool excludeOtherCollateral) external view returns (uint);

    function transferableSynthetixAndAnyRateIsInvalid(address account, uint balance)
        external
        view
        returns (uint transferable, bool anyRateIsInvalid);

    // Restricted: used internally to Synthetix
    function issueSynths(address from, uint amount) external;

    function issueSynthsOnBehalf(
        address issueFor,
        address from,
        uint amount
    ) external;

    function issueMaxSynths(address from) external;

    function issueMaxSynthsOnBehalf(address issueFor, address from) external;

    function burnSynths(address from, uint amount) external;

    function burnSynthsOnBehalf(
        address burnForAddress,
        address from,
        uint amount
    ) external;

    function burnSynthsToTarget(address from) external;

    function burnSynthsToTargetOnBehalf(address burnForAddress, address from) external;

    function burnForRedemption(
        address deprecatedSynthProxy,
        address account,
        uint balance
    ) external;

    function liquidateDelinquentAccount(
        address account,
        uint susdAmount,
        address liquidator
    ) external returns (uint totalRedeemed, uint amountToLiquidate);

    function setCurrentPeriodId(uint128 periodId) external;
}


// Inheritance


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/addressresolver
contract AddressResolver is Owned, IAddressResolver {
    mapping(bytes32 => address) public repository;

    constructor(address _owner) public Owned(_owner) {}

    /* ========== RESTRICTED FUNCTIONS ========== */

    function importAddresses(bytes32[] calldata names, address[] calldata destinations) external onlyOwner {
        require(names.length == destinations.length, "Input lengths must match");

        for (uint i = 0; i < names.length; i++) {
            bytes32 name = names[i];
            address destination = destinations[i];
            repository[name] = destination;
            emit AddressImported(name, destination);
        }
    }

    /* ========= PUBLIC FUNCTIONS ========== */

    function rebuildCaches(MixinResolver[] calldata destinations) external {
        for (uint i = 0; i < destinations.length; i++) {
            destinations[i].rebuildCache();
        }
    }

    /* ========== VIEWS ========== */

    function areAddressesImported(bytes32[] calldata names, address[] calldata destinations) external view returns (bool) {
        for (uint i = 0; i < names.length; i++) {
            if (repository[names[i]] != destinations[i]) {
                return false;
            }
        }
        return true;
    }

    function getAddress(bytes32 name) external view returns (address) {
        return repository[name];
    }

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address) {
        address _foundAddress = repository[name];
        require(_foundAddress != address(0), reason);
        return _foundAddress;
    }

    function getSynth(bytes32 key) external view returns (address) {
        IIssuer issuer = IIssuer(repository["Issuer"]);
        require(address(issuer) != address(0), "Cannot find Issuer address");
        return address(issuer.synths(key));
    }

    /* ========== EVENTS ========== */

    event AddressImported(bytes32 name, address destination);
}


// Internal references


// https://docs.synthetix.io/contracts/source/contracts/mixinresolver
contract MixinResolver {
    AddressResolver public resolver;

    mapping(bytes32 => address) private addressCache;

    constructor(address _resolver) internal {
        resolver = AddressResolver(_resolver);
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function combineArrays(bytes32[] memory first, bytes32[] memory second)
        internal
        pure
        returns (bytes32[] memory combination)
    {
        combination = new bytes32[](first.length + second.length);

        for (uint i = 0; i < first.length; i++) {
            combination[i] = first[i];
        }

        for (uint j = 0; j < second.length; j++) {
            combination[first.length + j] = second[j];
        }
    }

    /* ========== PUBLIC FUNCTIONS ========== */

    // Note: this function is public not external in order for it to be overridden and invoked via super in subclasses
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {}

    function rebuildCache() public {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        // The resolver must call this function whenver it updates its state
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // Note: can only be invoked once the resolver has all the targets needed added
            address destination =
                resolver.requireAndGetAddress(name, string(abi.encodePacked("Resolver missing target: ", name)));
            addressCache[name] = destination;
            emit CacheUpdated(name, destination);
        }
    }

    /* ========== VIEWS ========== */

    function isResolverCached() external view returns (bool) {
        bytes32[] memory requiredAddresses = resolverAddressesRequired();
        for (uint i = 0; i < requiredAddresses.length; i++) {
            bytes32 name = requiredAddresses[i];
            // false if our cache is invalid or if the resolver doesn't have the required address
            if (resolver.getAddress(name) != addressCache[name] || addressCache[name] == address(0)) {
                return false;
            }
        }

        return true;
    }

    /* ========== INTERNAL FUNCTIONS ========== */

    function requireAndGetAddress(bytes32 name) internal view returns (address) {
        address _foundAddress = addressCache[name];
        require(_foundAddress != address(0), string(abi.encodePacked("Missing address: ", name)));
        return _foundAddress;
    }

    /* ========== EVENTS ========== */

    event CacheUpdated(bytes32 name, address destination);
}


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}


// Libraries


// https://docs.synthetix.io/contracts/source/libraries/safedecimalmath
library SafeDecimalMath {
    using SafeMath for uint;

    /* Number of decimal places in the representations. */
    uint8 public constant decimals = 18;
    uint8 public constant highPrecisionDecimals = 27;

    /* The number representing 1.0. */
    uint public constant UNIT = 10**uint(decimals);

    /* The number representing 1.0 for higher fidelity numbers. */
    uint public constant PRECISE_UNIT = 10**uint(highPrecisionDecimals);
    uint private constant UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR = 10**uint(highPrecisionDecimals - decimals);

    /**
     * @return Provides an interface to UNIT.
     */
    function unit() external pure returns (uint) {
        return UNIT;
    }

    /**
     * @return Provides an interface to PRECISE_UNIT.
     */
    function preciseUnit() external pure returns (uint) {
        return PRECISE_UNIT;
    }

    /**
     * @return The result of multiplying x and y, interpreting the operands as fixed-point
     * decimals.
     *
     * @dev A unit factor is divided out after the product of x and y is evaluated,
     * so that product must be less than 2**256. As this is an integer division,
     * the internal division always rounds down. This helps save on gas. Rounding
     * is more expensive on gas.
     */
    function multiplyDecimal(uint x, uint y) internal pure returns (uint) {
        /* Divide by UNIT to remove the extra factor introduced by the product. */
        return x.mul(y) / UNIT;
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of the specified precision unit.
     *
     * @dev The operands should be in the form of a the specified unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function _multiplyDecimalRound(
        uint x,
        uint y,
        uint precisionUnit
    ) private pure returns (uint) {
        /* Divide by UNIT to remove the extra factor introduced by the product. */
        uint quotientTimesTen = x.mul(y) / (precisionUnit / 10);

        if (quotientTimesTen % 10 >= 5) {
            quotientTimesTen += 10;
        }

        return quotientTimesTen / 10;
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of a precise unit.
     *
     * @dev The operands should be in the precise unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function multiplyDecimalRoundPrecise(uint x, uint y) internal pure returns (uint) {
        return _multiplyDecimalRound(x, y, PRECISE_UNIT);
    }

    /**
     * @return The result of safely multiplying x and y, interpreting the operands
     * as fixed-point decimals of a standard unit.
     *
     * @dev The operands should be in the standard unit factor which will be
     * divided out after the product of x and y is evaluated, so that product must be
     * less than 2**256.
     *
     * Unlike multiplyDecimal, this function rounds the result to the nearest increment.
     * Rounding is useful when you need to retain fidelity for small decimal numbers
     * (eg. small fractions or percentages).
     */
    function multiplyDecimalRound(uint x, uint y) internal pure returns (uint) {
        return _multiplyDecimalRound(x, y, UNIT);
    }

    /**
     * @return The result of safely dividing x and y. The return value is a high
     * precision decimal.
     *
     * @dev y is divided after the product of x and the standard precision unit
     * is evaluated, so the product of x and UNIT must be less than 2**256. As
     * this is an integer division, the result is always rounded down.
     * This helps save on gas. Rounding is more expensive on gas.
     */
    function divideDecimal(uint x, uint y) internal pure returns (uint) {
        /* Reintroduce the UNIT factor that will be divided out by y. */
        return x.mul(UNIT).div(y);
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * decimal in the precision unit specified in the parameter.
     *
     * @dev y is divided after the product of x and the specified precision unit
     * is evaluated, so the product of x and the specified precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function _divideDecimalRound(
        uint x,
        uint y,
        uint precisionUnit
    ) private pure returns (uint) {
        uint resultTimesTen = x.mul(precisionUnit * 10).div(y);

        if (resultTimesTen % 10 >= 5) {
            resultTimesTen += 10;
        }

        return resultTimesTen / 10;
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * standard precision decimal.
     *
     * @dev y is divided after the product of x and the standard precision unit
     * is evaluated, so the product of x and the standard precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function divideDecimalRound(uint x, uint y) internal pure returns (uint) {
        return _divideDecimalRound(x, y, UNIT);
    }

    /**
     * @return The result of safely dividing x and y. The return value is as a rounded
     * high precision decimal.
     *
     * @dev y is divided after the product of x and the high precision unit
     * is evaluated, so the product of x and the high precision unit must
     * be less than 2**256. The result is rounded to the nearest increment.
     */
    function divideDecimalRoundPrecise(uint x, uint y) internal pure returns (uint) {
        return _divideDecimalRound(x, y, PRECISE_UNIT);
    }

    /**
     * @dev Convert a standard decimal representation to a high precision one.
     */
    function decimalToPreciseDecimal(uint i) internal pure returns (uint) {
        return i.mul(UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR);
    }

    /**
     * @dev Convert a high precision decimal to a standard decimal representation.
     */
    function preciseDecimalToDecimal(uint i) internal pure returns (uint) {
        uint quotientTimesTen = i / (UNIT_TO_HIGH_PRECISION_CONVERSION_FACTOR / 10);

        if (quotientTimesTen % 10 >= 5) {
            quotientTimesTen += 10;
        }

        return quotientTimesTen / 10;
    }

    // Computes `a - b`, setting the value to 0 if b > a.
    function floorsub(uint a, uint b) internal pure returns (uint) {
        return b >= a ? 0 : a - b;
    }

    /* ---------- Utilities ---------- */
    /*
     * Absolute value of the input, returned as a signed number.
     */
    function signedAbs(int x) internal pure returns (int) {
        return x < 0 ? -x : x;
    }

    /*
     * Absolute value of the input, returned as an unsigned number.
     */
    function abs(int x) internal pure returns (uint) {
        return uint(signedAbs(x));
    }
}


// Inheritance


// Libraries


// https://docs.synthetix.io/contracts/source/contracts/synthetixdebtshare
contract SynthetixDebtShare is Owned, MixinResolver, ISynthetixDebtShare {
    using SafeMath for uint;
    using SafeDecimalMath for uint;

    struct PeriodBalance {
        uint128 amount;
        uint128 periodId;
    }

    bytes32 public constant CONTRACT_NAME = "SynthetixDebtShare";

    bytes32 private constant CONTRACT_ISSUER = "Issuer";

    uint internal constant MAX_PERIOD_ITERATE = 30;

    /* ========== STATE VARIABLES ========== */

    /**
     * Addresses selected by owner which are allowed to call `transferFrom` to manage debt shares
     */
    mapping(address => bool) public authorizedBrokers;

    /**
     * Addresses selected by owner which are allowed to call `takeSnapshot`
     * `takeSnapshot` is not public because only a small number of snapshots can be retained for a period of time, and so they
     * must be controlled to prevent censorship
     */
    mapping(address => bool) public authorizedToSnapshot;

    /**
     * Records a user's balance as it changes from period to period.
     * The last item in the array always represents the user's most recent balance
     * The intermediate balance is only recorded if 
     * `currentPeriodId` differs (which would happen upon a call to `setCurrentPeriodId`)
     */
    mapping(address => PeriodBalance[]) public balances;

    /**
     * Records totalSupply as it changes from period to period
     * Similar to `balances`, the `totalSupplyOnPeriod` at index `currentPeriodId` matches the current total supply
     * Any other period ID would represent its most recent totalSupply before the period ID changed.
     */
    mapping(uint => uint) public totalSupplyOnPeriod;


    /* ERC20 fields. */
    string public name;
    string public symbol;
    uint8 public decimals;

    /**
     * Period ID used for recording accounting changes
     * Can only increment
     */
    uint128 public currentPeriodId;

    /**
     * Prevents the owner from making further changes to debt shares after initial import
     */
    bool public isInitialized = false;

    constructor(address _owner, address _resolver) public Owned(_owner) MixinResolver(_resolver) {
        name = "Synthetix Debt Shares";
        symbol = "SDS";
        decimals = 18;

        // NOTE: must match initial fee period ID on `FeePool` constructor if issuer wont report
        currentPeriodId = 1;
    }
    function resolverAddressesRequired() public view returns (bytes32[] memory addresses) {
        addresses = new bytes32[](1);
        addresses[0] = CONTRACT_ISSUER;
    }

    /* ========== VIEWS ========== */

    function balanceOf(address account) public view returns (uint) {
        uint accountPeriodHistoryCount = balances[account].length;

        if (accountPeriodHistoryCount == 0) {
            return 0;
        }

        return uint(balances[account][accountPeriodHistoryCount - 1].amount);
    }

    function balanceOfOnPeriod(address account, uint periodId) public view returns (uint) {
        uint accountPeriodHistoryCount = balances[account].length;

        int oldestHistoryIterate = int(MAX_PERIOD_ITERATE < accountPeriodHistoryCount ? accountPeriodHistoryCount - MAX_PERIOD_ITERATE : 0);
        int i;
        for (i = int(accountPeriodHistoryCount) - 1;i >= oldestHistoryIterate;i--) {
            if (balances[account][uint(i)].periodId <= periodId) {
                return uint(balances[account][uint(i)].amount);
            }
        }

        require(i < 0, "SynthetixDebtShare: not found in recent history");
        return 0;
    }

    function totalSupply() public view returns (uint) {
        return totalSupplyOnPeriod[currentPeriodId];
    }

    function sharePercent(address account) external view returns (uint) {
        return sharePercentOnPeriod(account, currentPeriodId);
    }

    function sharePercentOnPeriod(address account, uint periodId) public view returns (uint) {
        uint balance = balanceOfOnPeriod(account, periodId);
        
        if (balance == 0) {
            return 0;
        }
        
        return balance.divideDecimal(totalSupplyOnPeriod[periodId]);
    }

    function allowance(address, address spender) public view returns (uint) {
        if (authorizedBrokers[spender]) {
            return uint(-1);
        }
        else {
            return 0;
        }
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    function addAuthorizedBroker(address target) external onlyOwner {
        authorizedBrokers[target] = true;
        emit ChangeAuthorizedBroker(target, true);
    }

    function removeAuthorizedBroker(address target) external onlyOwner {
        authorizedBrokers[target] = false;
        emit ChangeAuthorizedBroker(target, false);
    }

    function addAuthorizedToSnapshot(address target) external onlyOwner {
        authorizedToSnapshot[target] = true;
        emit ChangeAuthorizedToSnapshot(target, true);
    }

    function removeAuthorizedToSnapshot(address target) external onlyOwner {
        authorizedToSnapshot[target] = false;
        emit ChangeAuthorizedToSnapshot(target, false);
    }

    function takeSnapshot(uint128 id) external onlyAuthorizedToSnapshot {
        require(id > currentPeriodId, "period id must always increase");
        totalSupplyOnPeriod[id] = totalSupplyOnPeriod[currentPeriodId];
        currentPeriodId = id;
    }
        
    function mintShare(address account, uint256 amount) external onlyIssuer {
        require(account != address(0), "ERC20: mint to the zero address");

        _increaseBalance(account, amount);

        totalSupplyOnPeriod[currentPeriodId] = totalSupplyOnPeriod[currentPeriodId].add(amount);

        emit Transfer(address(0), account, amount);
        emit Mint(account, amount);
    }

    function burnShare(address account, uint256 amount) external onlyIssuer {
        require(account != address(0), "ERC20: burn from zero address");

        _deductBalance(account, amount);

        totalSupplyOnPeriod[currentPeriodId] = totalSupplyOnPeriod[currentPeriodId].sub(amount);
        emit Transfer(account, address(0), amount);
        emit Burn(account, amount);
    }

    function approve(address, uint256) external pure returns(bool) {
        revert("debt shares are not transferrable");
    }

    function transfer(address, uint256) external pure returns(bool) {
        revert("debt shares are not transferrable");
    }

    function transferFrom(address from, address to, uint256 amount) external onlyAuthorizedBrokers returns(bool) {
        require(to != address(0), "ERC20: send to the zero address");

        _deductBalance(from, amount);
        _increaseBalance(to, amount);

        emit Transfer(address(from), address(to), amount);

        return true;
    }

    function importAddresses(address[] calldata accounts, uint256[] calldata amounts) external onlyOwner onlySetup {
        uint supply = totalSupplyOnPeriod[currentPeriodId];

        for (uint i = 0; i < accounts.length; i++) {
            uint curBalance = balanceOf(accounts[i]);
            if (curBalance < amounts[i]) {
                uint amount = amounts[i] - curBalance;
                _increaseBalance(accounts[i], amount);
                supply = supply.add(amount);
                emit Mint(accounts[i], amount);
                emit Transfer(address(0), accounts[i], amount);
            }
            else if (curBalance > amounts[i]) {
                uint amount = curBalance - amounts[i];
                _deductBalance(accounts[i], amount);
                supply = supply.sub(amount);
                emit Burn(accounts[i], amount);
                emit Transfer(accounts[i], address(0), amount);
            }
        }

        totalSupplyOnPeriod[currentPeriodId] = supply;
    }

    function finishSetup() external onlyOwner {
        isInitialized = true;
    }

    /* ========== INTERNAL FUNCTIONS ======== */
    function _increaseBalance(address account, uint amount) internal {
        uint accountBalanceCount = balances[account].length;

        if (accountBalanceCount == 0) {
            balances[account].push(PeriodBalance(uint128(amount), uint128(currentPeriodId)));
        }
        else {
            uint128 newAmount = uint128(uint(balances[account][accountBalanceCount - 1].amount).add(amount));

            if (balances[account][accountBalanceCount - 1].periodId != currentPeriodId) {
                balances[account].push(PeriodBalance(newAmount, currentPeriodId));
            }
            else {
                balances[account][accountBalanceCount - 1].amount = newAmount;
            }
        }
    }

    function _deductBalance(address account, uint amount) internal {
        uint accountBalanceCount = balances[account].length;

        require(accountBalanceCount != 0, "SynthetixDebtShare: account has no share to deduct");

        uint128 newAmount = uint128(uint(balances[account][accountBalanceCount - 1].amount).sub(amount));

        if (balances[account][accountBalanceCount - 1].periodId != currentPeriodId) {
            balances[account].push(PeriodBalance(
                newAmount, 
                currentPeriodId
            ));
        }
        else {
            balances[account][accountBalanceCount - 1].amount = newAmount;
        }
    }

    /* ========== MODIFIERS ========== */

    modifier onlyIssuer() {
        require(msg.sender == requireAndGetAddress(CONTRACT_ISSUER), "SynthetixDebtShare: only issuer can mint/burn");
        _;
    }

    modifier onlyAuthorizedToSnapshot() {
        require(authorizedToSnapshot[msg.sender] || msg.sender == requireAndGetAddress(CONTRACT_ISSUER), "SynthetixDebtShare: not authorized to snapshot");
        _;
    }

    modifier onlyAuthorizedBrokers() {
        require(authorizedBrokers[msg.sender], "SynthetixDebtShare: only brokers can transferFrom");
        _;
    }

    modifier onlySetup() {
        require(!isInitialized, "SynthetixDebt: only callable while still initializing");
        _;
    }

    /* ========== EVENTS ========== */
    event Mint(address indexed account, uint amount);
    event Burn(address indexed account, uint amount);
    event Transfer(address indexed from, address indexed to, uint value);

    event ChangeAuthorizedBroker(address indexed authorizedBroker, bool authorized);
    event ChangeAuthorizedToSnapshot(address indexed authorizedToSnapshot, bool authorized);
}