// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/math/Math.sol";
import "./Strings.sol";
import "./IERC20.sol";
import "./ERC721.sol";
import "./Base64.sol";
struct Tick {
  string op;
  uint256 amt;
}
contract INS20 is IERC20, ERC721 {
  uint64 public maxSupply; // 21,000,000
  uint64 public initialBlockNum;
  uint64 public amtDifficulty; // initial 10
  uint64 public blockDifficulty; // initial 1000
  uint64 public totalSupplyDifficulty; // initial 10,0000
  uint64 public lastBlock;
  uint64 public mintedPer; // 100 per block
  uint64 public perTxLimitAmount;
  uint64 public perWalletLimitAmount;
  // bytes32 public immutable hashPre;
  // bytes32 public immutable hash;
  bool public nft2ft;
  // number of tickets minted
  uint128 private tickNumber;
  uint128 internal _totalSupply;
  
  uint256 internal totalVotesAmount;
  address public proxy;
  // -------- IERC20 --------
  mapping(address => uint256) internal _balances;       // erc20 amount
  mapping(address => uint256) internal _insBalances;    // nft amount
  mapping(address => mapping(address => uint256)) private _allowances;
  mapping(uint256 => bool) internal _voted;
  string private _tick;
  // for svg
  mapping(uint256 => Tick) internal _tickets;
  constructor(
    string memory tick,
    uint64 maxSupply_,
    uint64 perWalletLimitAmount_,
    uint64 perTxLimitAmount_,
    address proxy_,
    uint64 initialBlockNum_,
    uint64 amtDifficulty_,
    uint64 blockDifficulty_,
    uint64 totalSupplyDifficulty_
  ) ERC721("fair-ins20", tick) {
    _tick = tick;
    
    maxSupply = maxSupply_;
    perWalletLimitAmount = perWalletLimitAmount_;
    perTxLimitAmount = perTxLimitAmount_;
    proxy = proxy_;
    initialBlockNum = initialBlockNum_;
    amtDifficulty = amtDifficulty_;
    blockDifficulty = blockDifficulty_;
    totalSupplyDifficulty = totalSupplyDifficulty_;
  }
  event Inscribe(address indexed from, address indexed to, string data);
  /// @dev Inscribe your first EVM Inscriptions
  /// @dev Use Flashbots for your txes https://docs.flashbots.net/flashbots-protect/quick-start#adding-flashbots-protect-rpc-manually
  function inscribe(uint256 amount) public {
    require(amount > 0, "Amount must be greater than zero");
    require(amount <= perTxLimitAmount, "Exceeded per tx limit");
    require(
      _balances[msg.sender] + amount <= perWalletLimitAmount,
      "Exceeded per wallet limit"
    );
    require(_totalSupply + amount <= maxSupply, "Exceeded max supply");
    
    require(tx.origin == msg.sender, "Contracts are not allowed");
    require(mintingAlgo(uint64(block.number), amount), "Minting algo failed");
    if (block.number > lastBlock) {
      lastBlock = uint64(block.number);
      mintedPer = 0;
    } else {
      require(
        mintedPer < 100,
        "Only 100 ticks per block. Using Flashbots can prevent failed txes."
      );
      unchecked {
        mintedPer++;
      }
    }
    string memory data = string.concat(
        '{"p":"ins-20","op":"mint","tick":"',
        _tick,
        '","amt":"',
        Strings.toString(amount),
        '"}'
      );
    _mint(msg.sender, tickNumber, amount);
    emit Inscribe(
      address(0),
      msg.sender,
      string(string.concat("data:text/plain;charset=utf-8", data))
    );
  }
  function mintingAlgo(uint64 currentBlockNum, uint256 amount) public view returns (bool) {
    uint256 random = uint256(keccak256(abi.encodePacked(currentBlockNum, amount, msg.sender, _totalSupply + 1)));
    uint256 decreasingFactor = currentBlockNum > initialBlockNum ? currentBlockNum - initialBlockNum : 1;
    // amtDifficulty = 10
    // blockDifficulty = 1000
    // totalSupplyDifficulty = 100000
    uint256 difficulty = 
      Math.sqrt(amount / amtDifficulty + 1) + 
      Math.sqrt(decreasingFactor / blockDifficulty) + 
      Math.sqrt(_totalSupply / totalSupplyDifficulty);
    return random % difficulty == 0;
  }
  function voteForFT(uint256[] calldata tokenIds) public {
    require(!nft2ft, "Has done");
    for (uint256 i = 0; i < tokenIds.length; i++) {
      require(_owners[tokenIds[i]] == msg.sender, "Not owner");
      require(!_voted[tokenIds[i]], "Has voted");
      _voted[tokenIds[i]] = true;
      totalVotesAmount += _tickets[tokenIds[i]].amt;
    }
    if (totalVotesAmount > maxSupply / 2) {
      nft2ft = true;
    }
  }
  function _mint(address to, uint256 tokenId, uint256 amount) internal {
    _beforeTokenTransfer(address(0), to, tokenId);
    unchecked {
      _totalSupply += uint128(amount);
      _balances[to] += amount;
      _insBalances[msg.sender]++;
    }
    _owners[tokenId] = to;
    _tickets[tokenId] = Tick("mint", amount);
    emit Transfer(address(0), to, tokenId);
    _afterTokenTransfer(address(0), to, tokenId);
  }
  // -------- IERC20 --------
  function symbol() public view virtual override returns (string memory) {
    return _tick;
  }
  function decimals() public view virtual returns (uint8) {
    return 1;
  }
  function totalSupply() public view override returns (uint256) {
    return _totalSupply;
  }
  function balanceOf(
    address owner
  ) public view override(ERC721, IERC20) returns (uint256) {
    require(owner != address(0), "ERC20: address zero is not a valid owner");
    return nft2ft ? _balances[owner] : _insBalances[owner];
  }
  function allowance(
    address owner,
    address spender
  ) public view override returns (uint256) {
    return _allowances[owner][spender];
  }
  function approve(
    address spender,
    uint256 amountOrTokenID
  ) public override(ERC721, IERC20) {
    if (!nft2ft) {
      ERC721.approve(spender, amountOrTokenID);
    } else {
      address owner = msg.sender;
      _approve(owner, spender, amountOrTokenID);
    }
  }
  function setApprovalForAll(
    address operator,
    bool approved
  ) public override {
    if (!nft2ft) {
      ERC721.setApprovalForAll(operator,approved);
    }
  }
  // only for FT
  function transfer(
    address to,
    uint256 amount
  ) external override returns (bool) {
    if (nft2ft) {
      require(to != address(0), "ERC20: transfer to the zero address");
      _transfer20(msg.sender, to, amount);
    }
    return nft2ft;
  }
  function transferFrom(
    address from,
    address to,
    uint256 tokenIdOrAmount
  ) public override(ERC721, IERC20) returns (bool) {
    require(from != address(0), "INS20: transfer from the zero address");
    require(to != address(0), "INS20: transfer to the zero address");
    if (!nft2ft) {
      require(
        _isApprovedOrOwner(_msgSender(), tokenIdOrAmount),
        "ERC721: caller is not token owner nor approved"
      );
      _transfer721(from, to, tokenIdOrAmount);
    } else {
      _spendAllowance(from, msg.sender, tokenIdOrAmount);
      _transfer20(from, to, tokenIdOrAmount);
    }
    return true;
  }
  function _spendAllowance(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    uint256 currentAllowance = allowance(owner, spender);
    if (currentAllowance != type(uint256).max) {
      require(currentAllowance >= amount, "ERC20: insufficient allowance");
      unchecked {
        _approve(owner, spender, currentAllowance - amount);
      }
    }
  }
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");
    _allowances[owner][spender] = amount;
    if(nft2ft) emit Approval(owner, spender, amount);
  }
  function _transfer20(address from, address to, uint256 amount) internal {
    _beforeTokenTransfer(from, to, amount);
    // transfer like erc20
    uint256 fromBalance = _balances[from];
    require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
    unchecked {
      _balances[from] = fromBalance - amount;
    }
    _balances[to] += amount;
    string memory t = string.concat(
        '{"p":"ins-20","op":"transfer","tick":"FAIR","amt":"',
        Strings.toString(amount),
        '"}'
      );
    emit Inscribe(
      from,
      to,
      string(string.concat("data:text/plain;charset=utf-8", t))
    );
    _afterTokenTransfer(from, to, amount);
    if (nft2ft) emit Transfer(from, to, amount);
  }
  // -------- IERC721 --------
  // just for erc721 transfer
  function _transfer721(address from, address to, uint256 tokenId) internal {
    // transfer like erc721
    ERC721._transfer(from, to, tokenId);
    // transfer like erc20
    _transfer20(from, to, _tickets[tokenId].amt);
    _insBalances[from] -= 1;
    _insBalances[to] += 1;
    emit Transfer(from, to, tokenId);
    ERC721._approve(address(0), tokenId);
  }
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public override {
    require(
      !nft2ft,
      "Not support ERC721 any more."
    );
    safeTransferFrom(from, to, tokenId, "");
  }
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes memory data
  ) public override {
    require(
      !nft2ft,
      "Not support ERC721 any more."
    );
    require(
      _isApprovedOrOwner(_msgSender(), tokenId),
      "ERC721: caller is not token owner nor approved"
    );
    _transfer721(from, to, tokenId);
    require(
      _checkOnERC721Received(from, to, tokenId, data),
      "ERC721: transfer to non ERC721Receiver implementer"
    );
  }
  function toFT() public {
    require(!nft2ft && proxy == msg.sender, "Has done");
    nft2ft = true;
  }
  function setInitBlockNum(uint64 initialBlockNum_) public {
    require(proxy == msg.sender, "Sender is not proxy");
    initialBlockNum = initialBlockNum_;
  }
  function setDifficulty(uint64 amtDifficulty_, uint64 blockDifficulty_, uint64 totalSupplyDifficulty_) public {
    require(proxy == msg.sender, "Sender is not proxy");
    amtDifficulty = amtDifficulty_;
    blockDifficulty = blockDifficulty_;
    totalSupplyDifficulty = totalSupplyDifficulty_;
  }
  function setProxy(address proxy_) public {
    require(proxy == msg.sender, "Sender is not proxy");
    proxy = proxy_;
  }
  function totalVotedAmount() public view returns (uint256) {
    return totalVotesAmount;
  }
  // metadata
  function tokenURI(
    uint256 tokenID
  ) public view virtual override returns (string memory) {
    require(
      !nft2ft,
      "Not support ERC721 any more."
    );
    string memory output = '<svg xmlns="http://www.w3.org/2000/svg" preserveAspectRatio="xMinYMin meet" viewBox="0 0 350 350"> <style>.base { fill: green; font-family: serif; font-size: 14px; }</style><rect width="100%" height="100%" fill="black" /><text x="100" y="100" class="base">{</text><text x="130" y="130" class="base">"p":"ins-20",</text><text x="130" y="160" class="base">"op":"';
    bytes memory data;
    data = abi.encodePacked(
      output,
      bytes(_tickets[tokenID].op),
      '",</text><text x="130" y="190" class="base">"tick":"fair",</text><text x="130" y="220" class="base">"amt":'
    );
    data = abi.encodePacked(
      data,
      bytes(Strings.toString(_tickets[tokenID].amt)),
      '</text><text x="100" y="250" class="base">}</text></svg>'
    );
    string memory json = Base64.encode(
      bytes(
        string(
          abi.encodePacked(
            '{"description": "FAIR-INS20 is a social experiment and a fair distribution of INS20.", "image": "data:image/svg+xml;base64,',
            Base64.encode(data),
            '"}'
          )
        )
      )
    );
    output = string(abi.encodePacked("data:application/json;base64,", json));
    return output;
  }
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal override(ERC721) {
    if (from == address(0)) {
      tickNumber++;
    }
  }
  function _afterTokenTransfer(
    address from,
    address to,
    uint256 tokenId
  ) internal virtual override(ERC721) {}
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// [MIT License]
/// @title Base64
/// @notice Provides a function for encoding some bytes in base64
/// @author Brecht Devos <[email protected]>
library Base64 {
    bytes internal constant TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
    /// @notice Encodes some bytes to the base64 representation
    function encode(bytes memory data) internal pure returns (string memory) {
        uint256 len = data.length;
        if (len == 0) return "";
        // multiply by 4/3 rounded up
        uint256 encodedLen = 4 * ((len + 2) / 3);
        // Add some extra buffer at the end
        bytes memory result = new bytes(encodedLen + 32);
        bytes memory table = TABLE;
        assembly {
            let tablePtr := add(table, 1)
            let resultPtr := add(result, 32)
            for {
                let i := 0
            } lt(i, len) {
            } {
                i := add(i, 3)
                let input := and(mload(add(data, i)), 0xffffff)
                let out := mload(add(tablePtr, and(shr(18, input), 0x3F)))
                out := shl(8, out)
                out := add(out, and(mload(add(tablePtr, and(shr(12, input), 0x3F))), 0xFF))
                out := shl(8, out)
                out := add(out, and(mload(add(tablePtr, and(shr(6, input), 0x3F))), 0xFF))
                out := shl(8, out)
                out := add(out, and(mload(add(tablePtr, and(input, 0x3F))), 0xFF))
                out := shl(224, out)
                mstore(resultPtr, out)
                resultPtr := add(resultPtr, 4)
            }
            switch mod(len, 3)
            case 1 {
                mstore(sub(resultPtr, 2), shl(240, 0x3d3d))
            }
            case 2 {
                mstore(sub(resultPtr, 1), shl(248, 0x3d))
            }
            mstore(result, encodedLen)
        }
        return string(result);
    }
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "./Address.sol";
import "./Strings.sol";
import "./IERC721Metadata.sol";
/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721Metadata {
  using Strings for uint256;
  using Address for address;
  // Token name
  string private _name;
  // Token symbol
  string private _symbol;
  // Mapping from token ID to owner address
  mapping(uint256 => address) internal _owners;
  // Mapping from token ID to approved address
  mapping(uint256 => address) private _tokenApprovals;
  // Mapping from owner to operator approvals
  mapping(address => mapping(address => bool)) private _operatorApprovals;
  /**
   * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
   */
  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
  }
  /**
   * @dev See {IERC721Metadata-name}.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }
  /**
   * @dev See {IERC721Metadata-symbol}.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }
  /**
   * @dev See {IERC165-supportsInterface}.
   */
  function supportsInterface(
    bytes4 interfaceId
  ) public view virtual override(ERC165, IERC165) returns (bool) {
    return
      interfaceId == type(IERC721).interfaceId ||
      super.supportsInterface(interfaceId);
  }
  /**
   * @dev See {IERC721-balanceOf}.
   */
  function balanceOf(
    address owner
  ) public view virtual override returns (uint256) {}
  /**
   * @dev See {IERC721-ownerOf}.
   */
  function ownerOf(
    uint256 tokenId
  ) public view virtual override returns (address) {
    address owner = _owners[tokenId];
    require(owner != address(0), "ERC721: invalid token ID");
    return owner;
  }
  /**
   * @dev See {IERC721Metadata-tokenURI}.
   */
  function tokenURI(
    uint256 tokenId
  ) public view virtual override returns (string memory) {}
  /**
   * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
   * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
   * by default, can be overridden in child contracts.
   */
  function _baseURI() internal view virtual returns (string memory) {
    return "";
  }
  /**
   * @dev See {IERC721-approve}.
   */
  function approve(address to, uint256 tokenId) public virtual override {
    address owner = ERC721.ownerOf(tokenId);
    require(to != owner, "ERC721: approval to current owner");
    require(
      _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
      "ERC721: approve caller is not token owner nor approved for all"
    );
    _approve(to, tokenId);
  }
  /**
   * @dev See {IERC721-getApproved}.
   */
  function getApproved(
    uint256 tokenId
  ) public view virtual override returns (address) {
    _requireMinted(tokenId);
    return _tokenApprovals[tokenId];
  }
  /**
   * @dev See {IERC721-setApprovalForAll}.
   */
  function setApprovalForAll(
    address operator,
    bool approved
  ) public virtual override {
    _setApprovalForAll(_msgSender(), operator, approved);
  }
  /**
   * @dev See {IERC721-isApprovedForAll}.
   */
  function isApprovedForAll(
    address owner,
    address operator
  ) public view virtual override returns (bool) {
    return _operatorApprovals[owner][operator];
  }
  /**
   * @dev See {IERC721-transferFrom}.
   */
  function transferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public virtual override returns (bool) {
    return true;
  }
  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public virtual override {}
  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes memory data
  ) public virtual override {}
  /**
   * @dev Returns whether `tokenId` exists.
   *
   * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
   *
   * Tokens start existing when they are minted (`_mint`),
   * and stop existing when they are burned (`_burn`).
   */
  function _exists(uint256 tokenId) internal view virtual returns (bool) {
    return _owners[tokenId] != address(0);
  }
  /**
   * @dev Returns whether `spender` is allowed to manage `tokenId`.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function _isApprovedOrOwner(
    address spender,
    uint256 tokenId
  ) internal view virtual returns (bool) {
    address owner = ERC721.ownerOf(tokenId);
    return (spender == owner ||
      isApprovedForAll(owner, spender) ||
      getApproved(tokenId) == spender);
  }
  /**
   * @dev Mints `tokenId` and transfers it to `to`.
   *
   * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
   *
   * Requirements:
   *
   * - `tokenId` must not exist.
   * - `to` cannot be the zero address.
   *
   * Emits a {Transfer} event.
   */
  function _mint(address to, uint256 tokenId) internal virtual {}
  function _transfer(
    address from,
    address to,
    uint256 tokenId
  ) internal virtual {
    require(
      ERC721.ownerOf(tokenId) == from,
      "ERC721: transfer from incorrect owner"
    );
    _owners[tokenId] = to;
  }
  /**
   * @dev Approve `to` to operate on `tokenId`
   *
   * Emits an {Approval} event.
   */
  function _approve(address to, uint256 tokenId) internal virtual {
    _tokenApprovals[tokenId] = to;
    emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
  }
  /**
   * @dev Approve `operator` to operate on all of `owner` tokens
   *
   * Emits an {ApprovalForAll} event.
   */
  function _setApprovalForAll(
    address owner,
    address operator,
    bool approved
  ) internal virtual {
    require(owner != operator, "ERC721: approve to caller");
    _operatorApprovals[owner][operator] = approved;
    emit ApprovalForAll(owner, operator, approved);
  }
  /**
   * @dev Reverts if the `tokenId` has not been minted yet.
   */
  function _requireMinted(uint256 tokenId) internal view virtual {
    require(_exists(tokenId), "ERC721: invalid token ID");
  }
  function _checkOnERC721Received(
    address from,
    address to,
    uint256 tokenId,
    bytes memory data
  ) internal returns (bool) {
    if (to.isContract()) {
      try
        IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data)
      returns (bytes4 retval) {
        return retval == IERC721Receiver.onERC721Received.selector;
      } catch (bytes memory reason) {
        if (reason.length == 0) {
          revert("ERC721: transfer to non ERC721Receiver implementer");
        } else {
          /// @solidity memory-safe-assembly
          assembly {
            revert(add(32, reason), mload(reason))
          }
        }
      }
    } else {
      return true;
    }
  }
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 tokenId
  ) internal virtual {}
  function _afterTokenTransfer(
    address from,
    address to,
    uint256 tokenId
  ) internal virtual {}
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/INS20/ERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the INS20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);
  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);
  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);
  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(
    address owner,
    address spender
  ) external view returns (uint256);
  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external;
  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address from,
    address to,
    uint256 amount
  ) external returns (bool);
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.
            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
  /**
   * @dev Returns the token collection name.
   */
  function name() external view returns (string memory);
  /**
   * @dev Returns the token collection symbol.
   */
  function symbol() external view returns (string memory);
  /**
   * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
   */
  function tokenURI(uint256 tokenId) external view returns (string memory);
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
  /**
   * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
   */
  event Transfer(
    address indexed from,
    address indexed to,
    uint256 indexed tokenIdOrAmount
  );
  /**
   * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
   */
  event Approval(
    address indexed owner,
    address indexed approved,
    uint256 indexed tokenIdOrAmount
  );
  /**
   * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
   */
  event ApprovalForAll(
    address indexed owner,
    address indexed operator,
    bool approved
  );
  /**
   * @dev Returns the number of tokens in ``owner``'s account.
   */
  function balanceOf(address owner) external view returns (uint256 balance);
  /**
   * @dev Returns the owner of the `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function ownerOf(uint256 tokenId) external view returns (address owner);
  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes calldata data
  ) external;
  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
   * are aware of the ERC721 protocol to prevent tokens from being forever locked.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId) external;
  /**
   * @dev Transfers `tokenId` token from `from` to `to`.
   *
   * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address from,
    address to,
    uint256 tokenId
  ) external returns (bool);
  /**
   * @dev Gives permission to `to` to transfer `tokenId` token to another account.
   * The approval is cleared when the token is transferred.
   *
   * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
   *
   * Requirements:
   *
   * - The caller must own the token or be an approved operator.
   * - `tokenId` must exist.
   *
   * Emits an {Approval} event.
   */
  function approve(address to, uint256 tokenId) external;
  /**
   * @dev Approve or remove `operator` as an operator for the caller.
   * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
   *
   * Requirements:
   *
   * - The `operator` cannot be the caller.
   *
   * Emits an {ApprovalForAll} event.
   */
  function setApprovalForAll(address operator, bool _approved) external;
  /**
   * @dev Returns the account approved for `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function getApproved(
    uint256 tokenId
  ) external view returns (address operator);
  /**
   * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
   *
   * See {setApprovalForAll}
   */
  function isApprovedForAll(
    address owner,
    address operator
  ) external view returns (bool);
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}