// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "./interfaces/internal/INFTCollectionInitializer.sol";
import "./interfaces/standards/royalties/IGetRoyalties.sol";
import "./interfaces/standards/royalties/ITokenCreator.sol";
import "./interfaces/standards/royalties/IGetFees.sol";
import "./interfaces/standards/royalties/IRoyaltyInfo.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import "./libraries/AddressLibrary.sol";
import "./mixins/collections/SequentialMintCollection.sol";
import "./mixins/collections/CollectionRoyalties.sol";
import "./mixins/shared/ContractFactory.sol";
/**
 * @title A collection of NFTs by a single creator.
 * @notice All NFTs from this contract are minted by the same creator.
 * A 10% royalty to the creator is included which may be split with collaborators on a per-NFT basis.
 * @author batu-inal & HardlyDifficult
 */
contract NFTCollection is
  INFTCollectionInitializer,
  IGetRoyalties,
  IGetFees,
  IRoyaltyInfo,
  ITokenCreator,
  ContractFactory,
  Initializable,
  ERC165Upgradeable,
  ERC721Upgradeable,
  ERC721BurnableUpgradeable,
  SequentialMintCollection,
  CollectionRoyalties
{
  using AddressLibrary for address;
  using AddressUpgradeable for address;
  /**
   * @notice The baseURI to use for the tokenURI, if undefined then `ipfs://` is used.
   */
  string private baseURI_;
  /**
   * @notice Stores hashes minted to prevent duplicates.
   * @dev 0 means not yet minted, set to 1 when minted.
   * For why using uint is better than using bool here:
   * github.com/OpenZeppelin/openzeppelin-contracts/blob/v4.7.3/contracts/security/ReentrancyGuard.sol#L23-L27
   */
  mapping(string => uint256) private cidToMinted;
  /**
   * @dev Stores an optional alternate address to receive creator revenue and royalty payments.
   * The target address may be a contract which could split or escrow payments.
   */
  mapping(uint256 => address payable) private tokenIdToCreatorPaymentAddress;
  /**
   * @dev Stores a CID for each NFT.
   */
  mapping(uint256 => string) private _tokenCIDs;
  /**
   * @notice Emitted when the owner changes the base URI to be used for NFTs in this collection.
   * @param baseURI The new base URI to use.
   */
  event BaseURIUpdated(string baseURI);
  /**
   * @notice Emitted when a new NFT is minted.
   * @param creator The address of the collection owner at this time this NFT was minted.
   * @param tokenId The tokenId of the newly minted NFT.
   * @param indexedTokenCID The CID of the newly minted NFT, indexed to enable watching for mint events by the tokenCID.
   * @param tokenCID The actual CID of the newly minted NFT.
   */
  event Minted(address indexed creator, uint256 indexed tokenId, string indexed indexedTokenCID, string tokenCID);
  /**
   * @notice Emitted when the payment address for creator royalties is set.
   * @param fromPaymentAddress The original address used for royalty payments.
   * @param toPaymentAddress The new address used for royalty payments.
   * @param tokenId The NFT which had the royalty payment address updated.
   */
  event TokenCreatorPaymentAddressSet(
    address indexed fromPaymentAddress,
    address indexed toPaymentAddress,
    uint256 indexed tokenId
  );
  /**
   * @notice Initialize the template's immutable variables.
   * @param _contractFactory The factory which will be used to create collection contracts.
   */
  constructor(address _contractFactory)
    ContractFactory(_contractFactory) // solhint-disable-next-line no-empty-blocks
  {}
  /**
   * @notice Called by the contract factory on creation.
   * @param _creator The creator of this collection.
   * @param _name The collection's `name`.
   * @param _symbol The collection's `symbol`.
   */
  function initialize(
    address payable _creator,
    string calldata _name,
    string calldata _symbol
  ) external initializer onlyContractFactory {
    __ERC721_init(_name, _symbol);
    _initializeSequentialMintCollection(_creator, 0);
  }
  /**
   * @notice Allows the creator to burn a specific token if they currently own the NFT.
   * @param tokenId The ID of the NFT to burn.
   * @dev The function here asserts `onlyOwner` while the super confirms ownership.
   */
  function burn(uint256 tokenId) public override onlyOwner {
    super.burn(tokenId);
  }
  /**
   * @notice Mint an NFT defined by its metadata path.
   * @dev This is only callable by the collection creator/owner.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mint(string calldata tokenCID) external returns (uint256 tokenId) {
    tokenId = _mint(tokenCID);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and approves the provided operator address.
   * @dev This is only callable by the collection creator/owner.
   * It can be used the first time they mint to save having to issue a separate approval
   * transaction before listing the NFT for sale.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param operator The address to set as an approved operator for the creator's account.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintAndApprove(string calldata tokenCID, address operator) external returns (uint256 tokenId) {
    tokenId = _mint(tokenCID);
    setApprovalForAll(operator, true);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and have creator revenue/royalties sent to an alternate address.
   * @dev This is only callable by the collection creator/owner.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param tokenCreatorPaymentAddress The royalty recipient address to use for this NFT.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentAddress(string calldata tokenCID, address payable tokenCreatorPaymentAddress)
    public
    returns (uint256 tokenId)
  {
    require(tokenCreatorPaymentAddress != address(0), "NFTCollection: tokenCreatorPaymentAddress is required");
    tokenId = _mint(tokenCID);
    tokenIdToCreatorPaymentAddress[tokenId] = tokenCreatorPaymentAddress;
    emit TokenCreatorPaymentAddressSet(address(0), tokenCreatorPaymentAddress, tokenId);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and approves the provided operator address.
   * @dev This is only callable by the collection creator/owner.
   * It can be used the first time they mint to save having to issue a separate approval
   * transaction before listing the NFT for sale.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param tokenCreatorPaymentAddress The royalty recipient address to use for this NFT.
   * @param operator The address to set as an approved operator for the creator's account.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentAddressAndApprove(
    string calldata tokenCID,
    address payable tokenCreatorPaymentAddress,
    address operator
  ) external returns (uint256 tokenId) {
    tokenId = mintWithCreatorPaymentAddress(tokenCID, tokenCreatorPaymentAddress);
    setApprovalForAll(operator, true);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and have creator revenue/royalties sent to an alternate address
   * which is defined by a contract call, typically a proxy contract address representing the payment terms.
   * @dev This is only callable by the collection creator/owner.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param paymentAddressFactory The contract to call which will return the address to use for payments.
   * @param paymentAddressCall The call details to send to the factory provided.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentFactory(
    string calldata tokenCID,
    address paymentAddressFactory,
    bytes calldata paymentAddressCall
  ) public returns (uint256 tokenId) {
    address payable tokenCreatorPaymentAddress = paymentAddressFactory.callAndReturnContractAddress(paymentAddressCall);
    tokenId = mintWithCreatorPaymentAddress(tokenCID, tokenCreatorPaymentAddress);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and have creator revenue/royalties sent to an alternate address
   * which is defined by a contract call, typically a proxy contract address representing the payment terms.
   * @dev This is only callable by the collection creator/owner.
   * It can be used the first time they mint to save having to issue a separate approval
   * transaction before listing the NFT for sale.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param paymentAddressFactory The contract to call which will return the address to use for payments.
   * @param paymentAddressCall The call details to send to the factory provided.
   * @param operator The address to set as an approved operator for the creator's account.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentFactoryAndApprove(
    string calldata tokenCID,
    address paymentAddressFactory,
    bytes calldata paymentAddressCall,
    address operator
  ) external returns (uint256 tokenId) {
    tokenId = mintWithCreatorPaymentFactory(tokenCID, paymentAddressFactory, paymentAddressCall);
    setApprovalForAll(operator, true);
  }
  /**
   * @notice Allows the collection creator to destroy this contract only if
   * no NFTs have been minted yet or the minted NFTs have been burned.
   * @dev Once destructed, a new collection could be deployed to this address (although that's discouraged).
   */
  function selfDestruct() external onlyOwner {
    _selfDestruct();
  }
  /**
   * @notice Allows the owner to assign a baseURI to use for the tokenURI instead of the default `ipfs://`.
   * @param baseURIOverride The new base URI to use for all NFTs in this collection.
   */
  function updateBaseURI(string calldata baseURIOverride) external onlyOwner {
    baseURI_ = baseURIOverride;
    emit BaseURIUpdated(baseURIOverride);
  }
  /**
   * @notice Allows the owner to set a max tokenID.
   * This provides a guarantee to collectors about the limit of this collection contract, if applicable.
   * @dev Once this value has been set, it may be decreased but can never be increased.
   * This max may be more than the final `totalSupply` if 1 or more tokens were burned.
   * @param _maxTokenId The max tokenId to set, all NFTs must have a tokenId less than or equal to this value.
   */
  function updateMaxTokenId(uint32 _maxTokenId) external onlyOwner {
    _updateMaxTokenId(_maxTokenId);
  }
  function _burn(uint256 tokenId) internal override(ERC721Upgradeable, SequentialMintCollection) {
    delete cidToMinted[_tokenCIDs[tokenId]];
    delete tokenIdToCreatorPaymentAddress[tokenId];
    delete _tokenCIDs[tokenId];
    super._burn(tokenId);
  }
  function _mint(string calldata tokenCID) private onlyOwner returns (uint256 tokenId) {
    require(bytes(tokenCID).length != 0, "NFTCollection: tokenCID is required");
    require(cidToMinted[tokenCID] == 0, "NFTCollection: NFT was already minted");
    // Number of tokens cannot realistically overflow 32 bits.
    tokenId = ++latestTokenId;
    require(maxTokenId == 0 || tokenId <= maxTokenId, "NFTCollection: Max token count has already been minted");
    cidToMinted[tokenCID] = 1;
    _tokenCIDs[tokenId] = tokenCID;
    _safeMint(msg.sender, tokenId);
    emit Minted(msg.sender, tokenId, tokenCID, tokenCID);
  }
  /**
   * @notice The base URI used for all NFTs in this collection.
   * @dev The `tokenCID` is appended to this to obtain an NFT's `tokenURI`.
   *      e.g. The URI for a token with the `tokenCID`: "foo" and `baseURI`: "ipfs://" is "ipfs://foo".
   * @return uri The base URI used by this collection.
   */
  function baseURI() external view returns (string memory uri) {
    uri = _baseURI();
  }
  /**
   * @notice Checks if the creator has already minted a given NFT using this collection contract.
   * @param tokenCID The CID to check for.
   * @return hasBeenMinted True if the creator has already minted an NFT with this CID.
   */
  function getHasMintedCID(string calldata tokenCID) external view returns (bool hasBeenMinted) {
    hasBeenMinted = cidToMinted[tokenCID] != 0;
  }
  /**
   * @inheritdoc CollectionRoyalties
   */
  function getTokenCreatorPaymentAddress(uint256 tokenId)
    public
    view
    override
    returns (address payable creatorPaymentAddress)
  {
    creatorPaymentAddress = tokenIdToCreatorPaymentAddress[tokenId];
    if (creatorPaymentAddress == address(0)) {
      creatorPaymentAddress = owner;
    }
  }
  /**
   * @inheritdoc IERC165Upgradeable
   */
  function supportsInterface(bytes4 interfaceId)
    public
    view
    override(ERC165Upgradeable, ERC721Upgradeable, CollectionRoyalties)
    returns (bool interfaceSupported)
  {
    // This is a no-op function required to avoid compile errors.
    interfaceSupported = super.supportsInterface(interfaceId);
  }
  /**
   * @inheritdoc IERC721MetadataUpgradeable
   */
  function tokenURI(uint256 tokenId) public view override returns (string memory uri) {
    require(_exists(tokenId), "NFTCollection: URI query for nonexistent token");
    uri = string.concat(_baseURI(), _tokenCIDs[tokenId]);
  }
  function _baseURI() internal view override returns (string memory uri) {
    uri = baseURI_;
    if (bytes(uri).length == 0) {
      uri = "ipfs://";
    }
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
struct CallWithoutValue {
  address target;
  bytes callData;
}
/**
 * @title A library for address helpers not already covered by the OZ library.
 * @author batu-inal & HardlyDifficult
 */
library AddressLibrary {
  using AddressUpgradeable for address;
  using AddressUpgradeable for address payable;
  /**
   * @notice Calls an external contract with arbitrary data and parse the return value into an address.
   * @param externalContract The address of the contract to call.
   * @param callData The data to send to the contract.
   * @return contractAddress The address of the contract returned by the call.
   */
  function callAndReturnContractAddress(address externalContract, bytes calldata callData)
    internal
    returns (address payable contractAddress)
  {
    bytes memory returnData = externalContract.functionCall(callData);
    contractAddress = abi.decode(returnData, (address));
    require(contractAddress.isContract(), "InternalProxyCall: did not return a contract");
  }
  function callAndReturnContractAddress(CallWithoutValue calldata call)
    internal
    returns (address payable contractAddress)
  {
    contractAddress = callAndReturnContractAddress(call.target, call.callData);
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/**
 * @author batu-inal & HardlyDifficult
 */
interface INFTCollectionInitializer {
  function initialize(
    address payable _creator,
    string memory _name,
    string memory _symbol
  ) external;
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol";
import "../../interfaces/standards/royalties/ITokenCreator.sol";
/**
 * @title Extends the OZ ERC721 implementation for collections which mint sequential token IDs.
 * @author batu-inal & HardlyDifficult
 */
abstract contract SequentialMintCollection is ITokenCreator, Initializable, ERC721BurnableUpgradeable {
  /****** Slot 0 (after inheritance) ******/
  /**
   * @notice The creator/owner of this NFT collection.
   * @dev This is the default royalty recipient if a different `paymentAddress` was not provided.
   * @return The collection's creator/owner address.
   */
  address payable public owner;
  /**
   * @notice The tokenId of the most recently created NFT.
   * @dev Minting starts at tokenId 1. Each mint will use this value + 1.
   * @return The most recently minted tokenId, or 0 if no NFTs have been minted yet.
   */
  uint32 public latestTokenId;
  /**
   * @notice The max tokenId which can be minted.
   * @dev This max may be less than the final `totalSupply` if 1 or more tokens were burned.
   * @return The max tokenId which can be minted.
   */
  uint32 public maxTokenId;
  /**
   * @notice Tracks how many tokens have been burned.
   * @dev This number is used to calculate the total supply efficiently.
   */
  uint32 private burnCounter;
  /****** End of storage ******/
  /**
   * @notice Emitted when the max tokenId supported by this collection is updated.
   * @param maxTokenId The new max tokenId. All NFTs in this collection will have a tokenId less than
   * or equal to this value.
   */
  event MaxTokenIdUpdated(uint256 indexed maxTokenId);
  /**
   * @notice Emitted when this collection is self destructed by the creator/owner/admin.
   * @param admin The account which requested this contract be self destructed.
   */
  event SelfDestruct(address indexed admin);
  modifier onlyOwner() {
    require(msg.sender == owner, "SequentialMintCollection: Caller is not owner");
    _;
  }
  function _initializeSequentialMintCollection(address payable _creator, uint32 _maxTokenId) internal onlyInitializing {
    owner = _creator;
    maxTokenId = _maxTokenId;
  }
  /**
   * @notice Allows the collection owner to destroy this contract only if
   * no NFTs have been minted yet or the minted NFTs have been burned.
   */
  function _selfDestruct() internal {
    require(totalSupply() == 0, "SequentialMintCollection: Any NFTs minted must be burned first");
    emit SelfDestruct(msg.sender);
    selfdestruct(payable(msg.sender));
  }
  /**
   * @notice Allows the owner to set a max tokenID.
   * This provides a guarantee to collectors about the limit of this collection contract, if applicable.
   * @dev Once this value has been set, it may be decreased but can never be increased.
   * @param _maxTokenId The max tokenId to set, all NFTs must have a tokenId less than or equal to this value.
   */
  function _updateMaxTokenId(uint32 _maxTokenId) internal {
    require(_maxTokenId != 0, "SequentialMintCollection: Max token ID may not be cleared");
    require(maxTokenId == 0 || _maxTokenId < maxTokenId, "SequentialMintCollection: Max token ID may not increase");
    require(latestTokenId <= _maxTokenId, "SequentialMintCollection: Max token ID must be >= last mint");
    maxTokenId = _maxTokenId;
    emit MaxTokenIdUpdated(_maxTokenId);
  }
  function _burn(uint256 tokenId) internal virtual override {
    unchecked {
      // Number of burned tokens cannot exceed latestTokenId which is the same size.
      ++burnCounter;
    }
    super._burn(tokenId);
  }
  /**
   * @inheritdoc ITokenCreator
   * @dev The tokenId param is ignored since all NFTs return the same value.
   */
  function tokenCreator(
    uint256 /* tokenId */
  ) external view returns (address payable creator) {
    creator = owner;
  }
  /**
   * @notice Returns the total amount of tokens stored by the contract.
   * @dev From the ERC-721 enumerable standard.
   * @return supply The total number of NFTs tracked by this contract.
   */
  function totalSupply() public view returns (uint256 supply) {
    unchecked {
      // Number of tokens minted is always >= burned tokens.
      supply = latestTokenId - burnCounter;
    }
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
import "../../interfaces/standards/royalties/IGetFees.sol";
import "../../interfaces/standards/royalties/IGetRoyalties.sol";
import "../../interfaces/standards/royalties/IRoyaltyInfo.sol";
import "../../interfaces/standards/royalties/ITokenCreator.sol";
import "../shared/Constants.sol";
/**
 * @title Defines various royalty APIs for broad marketplace support.
 * @author batu-inal & HardlyDifficult
 */
abstract contract CollectionRoyalties is IGetRoyalties, IGetFees, IRoyaltyInfo, ITokenCreator, ERC165Upgradeable {
  /**
   * @inheritdoc IGetFees
   */
  function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory recipients) {
    recipients = new address payable[](1);
    recipients[0] = getTokenCreatorPaymentAddress(tokenId);
  }
  /**
   * @inheritdoc IGetFees
   * @dev The tokenId param is ignored since all NFTs return the same value.
   */
  function getFeeBps(
    uint256 /* tokenId */
  ) external pure returns (uint256[] memory royaltiesInBasisPoints) {
    royaltiesInBasisPoints = new uint256[](1);
    royaltiesInBasisPoints[0] = ROYALTY_IN_BASIS_POINTS;
  }
  /**
   * @inheritdoc IGetRoyalties
   */
  function getRoyalties(uint256 tokenId)
    external
    view
    returns (address payable[] memory recipients, uint256[] memory royaltiesInBasisPoints)
  {
    recipients = new address payable[](1);
    recipients[0] = getTokenCreatorPaymentAddress(tokenId);
    royaltiesInBasisPoints = new uint256[](1);
    royaltiesInBasisPoints[0] = ROYALTY_IN_BASIS_POINTS;
  }
  /**
   * @notice The address to pay the creator proceeds/royalties for the collection.
   * @param tokenId The ID of the NFT to get the creator payment address for.
   * @return creatorPaymentAddress The address to which royalties should be paid.
   */
  function getTokenCreatorPaymentAddress(uint256 tokenId)
    public
    view
    virtual
    returns (address payable creatorPaymentAddress);
  /**
   * @inheritdoc IRoyaltyInfo
   */
  function royaltyInfo(uint256 tokenId, uint256 salePrice)
    external
    view
    returns (address receiver, uint256 royaltyAmount)
  {
    receiver = getTokenCreatorPaymentAddress(tokenId);
    unchecked {
      royaltyAmount = salePrice / ROYALTY_RATIO;
    }
  }
  /**
   * @inheritdoc IERC165Upgradeable
   * @dev Checks the supported royalty interfaces.
   */
  function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool interfaceSupported) {
    interfaceSupported = (interfaceId == type(IRoyaltyInfo).interfaceId ||
      interfaceId == type(ITokenCreator).interfaceId ||
      interfaceId == type(IGetRoyalties).interfaceId ||
      interfaceId == type(IGetFees).interfaceId ||
      super.supportsInterface(interfaceId));
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
/**
 * @title Stores a reference to the factory which is used to create contract proxies.
 * @author batu-inal & HardlyDifficult
 */
abstract contract ContractFactory {
  using AddressUpgradeable for address;
  /**
   * @notice The address of the factory which was used to create this contract.
   * @return The factory contract address.
   */
  address public immutable contractFactory;
  modifier onlyContractFactory() {
    require(msg.sender == contractFactory, "ContractFactory: Caller is not the factory");
    _;
  }
  /**
   * @notice Initialize the template's immutable variables.
   * @param _contractFactory The factory which will be used to create these contracts.
   */
  constructor(address _contractFactory) {
    require(_contractFactory.isContract(), "ContractFactory: Factory is not a contract");
    contractFactory = _contractFactory;
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
interface IGetRoyalties {
  /**
   * @notice Get the creator royalties to be sent.
   * @dev The data is the same as when calling `getFeeRecipients` and `getFeeBps` separately.
   * @param tokenId The ID of the NFT to get royalties for.
   * @return recipients An array of addresses to which royalties should be sent.
   * @return royaltiesInBasisPoints The array of fees to be sent to each recipient, in basis points.
   */
  function getRoyalties(uint256 tokenId)
    external
    view
    returns (address payable[] memory recipients, uint256[] memory royaltiesInBasisPoints);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
interface ITokenCreator {
  /**
   * @notice Returns the creator of this NFT collection.
   * @param tokenId The ID of the NFT to get the creator payment address for.
   * @return creator The creator of this collection.
   */
  function tokenCreator(uint256 tokenId) external view returns (address payable creator);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/**
 * @notice An interface for communicating fees to 3rd party marketplaces.
 * @dev Originally implemented in mainnet contract 0x44d6e8933f8271abcf253c72f9ed7e0e4c0323b3
 */
interface IGetFees {
  /**
   * @notice Get the recipient addresses to which creator royalties should be sent.
   * @dev The expected royalty amounts are communicated with `getFeeBps`.
   * @param tokenId The ID of the NFT to get royalties for.
   * @return recipients An array of addresses to which royalties should be sent.
   */
  function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory recipients);
  /**
   * @notice Get the creator royalty amounts to be sent to each recipient, in basis points.
   * @dev The expected recipients are communicated with `getFeeRecipients`.
   * @param tokenId The ID of the NFT to get royalties for.
   * @return royaltiesInBasisPoints The array of fees to be sent to each recipient, in basis points.
   */
  function getFeeBps(uint256 tokenId) external view returns (uint256[] memory royaltiesInBasisPoints);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/**
 * @notice Interface for EIP-2981: NFT Royalty Standard.
 * For more see: https://eips.ethereum.org/EIPS/eip-2981.
 */
interface IRoyaltyInfo {
  /**
   * @notice Get the creator royalties to be sent.
   * @param tokenId The ID of the NFT to get royalties for.
   * @param salePrice The total price of the sale.
   * @return receiver The address to which royalties should be sent.
   * @return royaltyAmount The total amount that should be sent to the `receiver`.
   */
  function royaltyInfo(uint256 tokenId, uint256 salePrice)
    external
    view
    returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
    }
    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721Upgradeable.sol";
import "./IERC721ReceiverUpgradeable.sol";
import "./extensions/IERC721MetadataUpgradeable.sol";
import "../../utils/AddressUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../utils/StringsUpgradeable.sol";
import "../../utils/introspection/ERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable {
    using AddressUpgradeable for address;
    using StringsUpgradeable for uint256;
    // Token name
    string private _name;
    // Token symbol
    string private _symbol;
    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;
    // Mapping owner address to token count
    mapping(address => uint256) private _balances;
    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;
    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;
    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC721_init_unchained(name_, symbol_);
    }
    function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        _name = name_;
        _symbol = symbol_;
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
        return
            interfaceId == type(IERC721Upgradeable).interfaceId ||
            interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||
            super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }
    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }
    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }
    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }
    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);
        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }
    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }
    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721Upgradeable.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");
        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner nor approved for all"
        );
        _approve(to, tokenId);
    }
    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);
        return _tokenApprovals[tokenId];
    }
    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }
    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }
    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
        _transfer(from, to, tokenId);
    }
    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }
    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
        _safeTransfer(from, to, tokenId, data);
    }
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }
    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }
    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721Upgradeable.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }
    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }
    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }
    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");
        _beforeTokenTransfer(address(0), to, tokenId);
        _balances[to] += 1;
        _owners[tokenId] = to;
        emit Transfer(address(0), to, tokenId);
        _afterTokenTransfer(address(0), to, tokenId);
    }
    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721Upgradeable.ownerOf(tokenId);
        _beforeTokenTransfer(owner, address(0), tokenId);
        // Clear approvals
        _approve(address(0), tokenId);
        _balances[owner] -= 1;
        delete _owners[tokenId];
        emit Transfer(owner, address(0), tokenId);
        _afterTokenTransfer(owner, address(0), tokenId);
    }
    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721Upgradeable.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");
        _beforeTokenTransfer(from, to, tokenId);
        // Clear approvals from the previous owner
        _approve(address(0), tokenId);
        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;
        emit Transfer(from, to, tokenId);
        _afterTokenTransfer(from, to, tokenId);
    }
    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721Upgradeable.ownerOf(tokenId), to, tokenId);
    }
    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }
    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }
    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }
    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[44] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/extensions/ERC721Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC721Upgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";
/**
 * @title ERC721 Burnable Token
 * @dev ERC721 Token that can be burned (destroyed).
 */
abstract contract ERC721BurnableUpgradeable is Initializable, ContextUpgradeable, ERC721Upgradeable {
    function __ERC721Burnable_init() internal onlyInitializing {
    }
    function __ERC721Burnable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Burns `tokenId`. See {ERC721-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public virtual {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
        _burn(tokenId);
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library StringsUpgradeable {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721ReceiverUpgradeable {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721Upgradeable.sol";
/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/// Constant values shared across mixins.
/**
 * @dev 100% in basis points.
 */
uint256 constant BASIS_POINTS = 10_000;
/**
 * @dev The default admin role defined by OZ ACL modules.
 */
bytes32 constant DEFAULT_ADMIN_ROLE = 0x00;
/**
 * @dev Cap the number of royalty recipients.
 * A cap is required to ensure gas costs are not too high when a sale is settled.
 */
uint256 constant MAX_ROYALTY_RECIPIENTS = 5;
/**
 * @dev The minimum increase of 10% required when making an offer or placing a bid.
 */
uint256 constant MIN_PERCENT_INCREMENT_DENOMINATOR = BASIS_POINTS / 1_000;
/**
 * @dev The gas limit used when making external read-only calls.
 * This helps to ensure that external calls does not prevent the market from executing.
 */
uint256 constant READ_ONLY_GAS_LIMIT = 40_000;
/**
 * @dev Default royalty cut paid out on secondary sales.
 * Set to 10% of the secondary sale.
 */
uint96 constant ROYALTY_IN_BASIS_POINTS = 1_000;
/**
 * @dev 10%, expressed as a denominator for more efficient calculations.
 */
uint256 constant ROYALTY_RATIO = BASIS_POINTS / ROYALTY_IN_BASIS_POINTS;
/**
 * @dev The gas limit to send ETH to multiple recipients, enough for a 5-way split.
 */
uint256 constant SEND_VALUE_GAS_LIMIT_MULTIPLE_RECIPIENTS = 210_000;
/**
 * @dev The gas limit to send ETH to a single recipient, enough for a contract with a simple receiver.
 */
uint256 constant SEND_VALUE_GAS_LIMIT_SINGLE_RECIPIENT = 20_000;
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../contracts/NFTCollection.sol";
contract $NFTCollection is NFTCollection {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor(address _contractFactory) NFTCollection(_contractFactory) {}
    function $_burn(uint256 tokenId) external {
        return super._burn(tokenId);
    }
    function $_baseURI() external view returns (string memory) {
        return super._baseURI();
    }
    function $_initializeSequentialMintCollection(address payable _creator,uint32 _maxTokenId) external {
        return super._initializeSequentialMintCollection(_creator,_maxTokenId);
    }
    function $_selfDestruct() external {
        return super._selfDestruct();
    }
    function $_updateMaxTokenId(uint32 _maxTokenId) external {
        return super._updateMaxTokenId(_maxTokenId);
    }
    function $__ERC721Burnable_init() external {
        return super.__ERC721Burnable_init();
    }
    function $__ERC721Burnable_init_unchained() external {
        return super.__ERC721Burnable_init_unchained();
    }
    function $__ERC721_init(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init(name_,symbol_);
    }
    function $__ERC721_init_unchained(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init_unchained(name_,symbol_);
    }
    function $_safeTransfer(address from,address to,uint256 tokenId,bytes calldata data) external {
        return super._safeTransfer(from,to,tokenId,data);
    }
    function $_exists(uint256 tokenId) external view returns (bool) {
        return super._exists(tokenId);
    }
    function $_isApprovedOrOwner(address spender,uint256 tokenId) external view returns (bool) {
        return super._isApprovedOrOwner(spender,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId) external {
        return super._safeMint(to,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId,bytes calldata data) external {
        return super._safeMint(to,tokenId,data);
    }
    function $_mint(address to,uint256 tokenId) external {
        return super._mint(to,tokenId);
    }
    function $_transfer(address from,address to,uint256 tokenId) external {
        return super._transfer(from,to,tokenId);
    }
    function $_approve(address to,uint256 tokenId) external {
        return super._approve(to,tokenId);
    }
    function $_setApprovalForAll(address owner,address operator,bool approved) external {
        return super._setApprovalForAll(owner,operator,approved);
    }
    function $_requireMinted(uint256 tokenId) external view {
        return super._requireMinted(tokenId);
    }
    function $_beforeTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._beforeTokenTransfer(from,to,tokenId);
    }
    function $_afterTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._afterTokenTransfer(from,to,tokenId);
    }
    function $__ERC165_init() external {
        return super.__ERC165_init();
    }
    function $__ERC165_init_unchained() external {
        return super.__ERC165_init_unchained();
    }
    function $__Context_init() external {
        return super.__Context_init();
    }
    function $__Context_init_unchained() external {
        return super.__Context_init_unchained();
    }
    function $_msgSender() external view returns (address) {
        return super._msgSender();
    }
    function $_msgData() external view returns (bytes memory) {
        return super._msgData();
    }
    function $_disableInitializers() external {
        return super._disableInitializers();
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/interfaces/internal/INFTCollectionInitializer.sol";
abstract contract $INFTCollectionInitializer is INFTCollectionInitializer {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/IGetFees.sol";
abstract contract $IGetFees is IGetFees {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/IGetRoyalties.sol";
abstract contract $IGetRoyalties is IGetRoyalties {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/IRoyaltyInfo.sol";
abstract contract $IRoyaltyInfo is IRoyaltyInfo {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/ITokenCreator.sol";
abstract contract $ITokenCreator is ITokenCreator {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../contracts/libraries/AddressLibrary.sol";
contract $AddressLibrary {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    event $callAndReturnContractAddress_address_bytes_Returned(address payable arg0);
    event $callAndReturnContractAddress_CallWithoutValue_Returned(address payable arg0);
    constructor() {}
    function $callAndReturnContractAddress(address externalContract,bytes calldata callData) external payable returns (address payable) {
        (address payable ret0) = AddressLibrary.callAndReturnContractAddress(externalContract,callData);
        emit $callAndReturnContractAddress_address_bytes_Returned(ret0);
        return (ret0);
    }
    function $callAndReturnContractAddress(CallWithoutValue calldata call) external payable returns (address payable) {
        (address payable ret0) = AddressLibrary.callAndReturnContractAddress(call);
        emit $callAndReturnContractAddress_CallWithoutValue_Returned(ret0);
        return (ret0);
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/collections/CollectionRoyalties.sol";
abstract contract $CollectionRoyalties is CollectionRoyalties {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    function $__ERC165_init() external {
        return super.__ERC165_init();
    }
    function $__ERC165_init_unchained() external {
        return super.__ERC165_init_unchained();
    }
    function $_disableInitializers() external {
        return super._disableInitializers();
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/collections/SequentialMintCollection.sol";
contract $SequentialMintCollection is SequentialMintCollection {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    function $_initializeSequentialMintCollection(address payable _creator,uint32 _maxTokenId) external {
        return super._initializeSequentialMintCollection(_creator,_maxTokenId);
    }
    function $_selfDestruct() external {
        return super._selfDestruct();
    }
    function $_updateMaxTokenId(uint32 _maxTokenId) external {
        return super._updateMaxTokenId(_maxTokenId);
    }
    function $_burn(uint256 tokenId) external {
        return super._burn(tokenId);
    }
    function $__ERC721Burnable_init() external {
        return super.__ERC721Burnable_init();
    }
    function $__ERC721Burnable_init_unchained() external {
        return super.__ERC721Burnable_init_unchained();
    }
    function $__ERC721_init(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init(name_,symbol_);
    }
    function $__ERC721_init_unchained(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init_unchained(name_,symbol_);
    }
    function $_baseURI() external view returns (string memory) {
        return super._baseURI();
    }
    function $_safeTransfer(address from,address to,uint256 tokenId,bytes calldata data) external {
        return super._safeTransfer(from,to,tokenId,data);
    }
    function $_exists(uint256 tokenId) external view returns (bool) {
        return super._exists(tokenId);
    }
    function $_isApprovedOrOwner(address spender,uint256 tokenId) external view returns (bool) {
        return super._isApprovedOrOwner(spender,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId) external {
        return super._safeMint(to,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId,bytes calldata data) external {
        return super._safeMint(to,tokenId,data);
    }
    function $_mint(address to,uint256 tokenId) external {
        return super._mint(to,tokenId);
    }
    function $_transfer(address from,address to,uint256 tokenId) external {
        return super._transfer(from,to,tokenId);
    }
    function $_approve(address to,uint256 tokenId) external {
        return super._approve(to,tokenId);
    }
    function $_setApprovalForAll(address owner,address operator,bool approved) external {
        return super._setApprovalForAll(owner,operator,approved);
    }
    function $_requireMinted(uint256 tokenId) external view {
        return super._requireMinted(tokenId);
    }
    function $_beforeTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._beforeTokenTransfer(from,to,tokenId);
    }
    function $_afterTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._afterTokenTransfer(from,to,tokenId);
    }
    function $__ERC165_init() external {
        return super.__ERC165_init();
    }
    function $__ERC165_init_unchained() external {
        return super.__ERC165_init_unchained();
    }
    function $__Context_init() external {
        return super.__Context_init();
    }
    function $__Context_init_unchained() external {
        return super.__Context_init_unchained();
    }
    function $_msgSender() external view returns (address) {
        return super._msgSender();
    }
    function $_msgData() external view returns (bytes memory) {
        return super._msgData();
    }
    function $_disableInitializers() external {
        return super._disableInitializers();
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/shared/Constants.sol";
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/shared/ContractFactory.sol";
contract $ContractFactory is ContractFactory {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor(address _contractFactory) ContractFactory(_contractFactory) {}
    receive() external payable {}
}

// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "./interfaces/internal/INFTCollectionInitializer.sol";
import "./interfaces/standards/royalties/IGetRoyalties.sol";
import "./interfaces/standards/royalties/ITokenCreator.sol";
import "./interfaces/standards/royalties/IGetFees.sol";
import "./interfaces/standards/royalties/IRoyaltyInfo.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import "./libraries/AddressLibrary.sol";
import "./mixins/collections/SequentialMintCollection.sol";
import "./mixins/collections/CollectionRoyalties.sol";
import "./mixins/shared/ContractFactory.sol";
/**
 * @title A collection of NFTs by a single creator.
 * @notice All NFTs from this contract are minted by the same creator.
 * A 10% royalty to the creator is included which may be split with collaborators on a per-NFT basis.
 * @author batu-inal & HardlyDifficult
 */
contract NFTCollection is
  INFTCollectionInitializer,
  IGetRoyalties,
  IGetFees,
  IRoyaltyInfo,
  ITokenCreator,
  ContractFactory,
  Initializable,
  ERC165Upgradeable,
  ERC721Upgradeable,
  ERC721BurnableUpgradeable,
  SequentialMintCollection,
  CollectionRoyalties
{
  using AddressLibrary for address;
  using AddressUpgradeable for address;
  /**
   * @notice The baseURI to use for the tokenURI, if undefined then `ipfs://` is used.
   */
  string private baseURI_;
  /**
   * @notice Stores hashes minted to prevent duplicates.
   * @dev 0 means not yet minted, set to 1 when minted.
   * For why using uint is better than using bool here:
   * github.com/OpenZeppelin/openzeppelin-contracts/blob/v4.7.3/contracts/security/ReentrancyGuard.sol#L23-L27
   */
  mapping(string => uint256) private cidToMinted;
  /**
   * @dev Stores an optional alternate address to receive creator revenue and royalty payments.
   * The target address may be a contract which could split or escrow payments.
   */
  mapping(uint256 => address payable) private tokenIdToCreatorPaymentAddress;
  /**
   * @dev Stores a CID for each NFT.
   */
  mapping(uint256 => string) private _tokenCIDs;
  /**
   * @notice Emitted when the owner changes the base URI to be used for NFTs in this collection.
   * @param baseURI The new base URI to use.
   */
  event BaseURIUpdated(string baseURI);
  /**
   * @notice Emitted when a new NFT is minted.
   * @param creator The address of the collection owner at this time this NFT was minted.
   * @param tokenId The tokenId of the newly minted NFT.
   * @param indexedTokenCID The CID of the newly minted NFT, indexed to enable watching for mint events by the tokenCID.
   * @param tokenCID The actual CID of the newly minted NFT.
   */
  event Minted(address indexed creator, uint256 indexed tokenId, string indexed indexedTokenCID, string tokenCID);
  /**
   * @notice Emitted when the payment address for creator royalties is set.
   * @param fromPaymentAddress The original address used for royalty payments.
   * @param toPaymentAddress The new address used for royalty payments.
   * @param tokenId The NFT which had the royalty payment address updated.
   */
  event TokenCreatorPaymentAddressSet(
    address indexed fromPaymentAddress,
    address indexed toPaymentAddress,
    uint256 indexed tokenId
  );
  /**
   * @notice Initialize the template's immutable variables.
   * @param _contractFactory The factory which will be used to create collection contracts.
   */
  constructor(address _contractFactory)
    ContractFactory(_contractFactory) // solhint-disable-next-line no-empty-blocks
  {}
  /**
   * @notice Called by the contract factory on creation.
   * @param _creator The creator of this collection.
   * @param _name The collection's `name`.
   * @param _symbol The collection's `symbol`.
   */
  function initialize(
    address payable _creator,
    string calldata _name,
    string calldata _symbol
  ) external initializer onlyContractFactory {
    __ERC721_init(_name, _symbol);
    _initializeSequentialMintCollection(_creator, 0);
  }
  /**
   * @notice Allows the creator to burn a specific token if they currently own the NFT.
   * @param tokenId The ID of the NFT to burn.
   * @dev The function here asserts `onlyOwner` while the super confirms ownership.
   */
  function burn(uint256 tokenId) public override onlyOwner {
    super.burn(tokenId);
  }
  /**
   * @notice Mint an NFT defined by its metadata path.
   * @dev This is only callable by the collection creator/owner.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mint(string calldata tokenCID) external returns (uint256 tokenId) {
    tokenId = _mint(tokenCID);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and approves the provided operator address.
   * @dev This is only callable by the collection creator/owner.
   * It can be used the first time they mint to save having to issue a separate approval
   * transaction before listing the NFT for sale.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param operator The address to set as an approved operator for the creator's account.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintAndApprove(string calldata tokenCID, address operator) external returns (uint256 tokenId) {
    tokenId = _mint(tokenCID);
    setApprovalForAll(operator, true);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and have creator revenue/royalties sent to an alternate address.
   * @dev This is only callable by the collection creator/owner.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param tokenCreatorPaymentAddress The royalty recipient address to use for this NFT.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentAddress(string calldata tokenCID, address payable tokenCreatorPaymentAddress)
    public
    returns (uint256 tokenId)
  {
    require(tokenCreatorPaymentAddress != address(0), "NFTCollection: tokenCreatorPaymentAddress is required");
    tokenId = _mint(tokenCID);
    tokenIdToCreatorPaymentAddress[tokenId] = tokenCreatorPaymentAddress;
    emit TokenCreatorPaymentAddressSet(address(0), tokenCreatorPaymentAddress, tokenId);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and approves the provided operator address.
   * @dev This is only callable by the collection creator/owner.
   * It can be used the first time they mint to save having to issue a separate approval
   * transaction before listing the NFT for sale.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param tokenCreatorPaymentAddress The royalty recipient address to use for this NFT.
   * @param operator The address to set as an approved operator for the creator's account.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentAddressAndApprove(
    string calldata tokenCID,
    address payable tokenCreatorPaymentAddress,
    address operator
  ) external returns (uint256 tokenId) {
    tokenId = mintWithCreatorPaymentAddress(tokenCID, tokenCreatorPaymentAddress);
    setApprovalForAll(operator, true);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and have creator revenue/royalties sent to an alternate address
   * which is defined by a contract call, typically a proxy contract address representing the payment terms.
   * @dev This is only callable by the collection creator/owner.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param paymentAddressFactory The contract to call which will return the address to use for payments.
   * @param paymentAddressCall The call details to send to the factory provided.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentFactory(
    string calldata tokenCID,
    address paymentAddressFactory,
    bytes calldata paymentAddressCall
  ) public returns (uint256 tokenId) {
    address payable tokenCreatorPaymentAddress = paymentAddressFactory.callAndReturnContractAddress(paymentAddressCall);
    tokenId = mintWithCreatorPaymentAddress(tokenCID, tokenCreatorPaymentAddress);
  }
  /**
   * @notice Mint an NFT defined by its metadata path and have creator revenue/royalties sent to an alternate address
   * which is defined by a contract call, typically a proxy contract address representing the payment terms.
   * @dev This is only callable by the collection creator/owner.
   * It can be used the first time they mint to save having to issue a separate approval
   * transaction before listing the NFT for sale.
   * @param tokenCID The CID for the metadata json of the NFT to mint.
   * @param paymentAddressFactory The contract to call which will return the address to use for payments.
   * @param paymentAddressCall The call details to send to the factory provided.
   * @param operator The address to set as an approved operator for the creator's account.
   * @return tokenId The tokenId of the newly minted NFT.
   */
  function mintWithCreatorPaymentFactoryAndApprove(
    string calldata tokenCID,
    address paymentAddressFactory,
    bytes calldata paymentAddressCall,
    address operator
  ) external returns (uint256 tokenId) {
    tokenId = mintWithCreatorPaymentFactory(tokenCID, paymentAddressFactory, paymentAddressCall);
    setApprovalForAll(operator, true);
  }
  /**
   * @notice Allows the collection creator to destroy this contract only if
   * no NFTs have been minted yet or the minted NFTs have been burned.
   * @dev Once destructed, a new collection could be deployed to this address (although that's discouraged).
   */
  function selfDestruct() external onlyOwner {
    _selfDestruct();
  }
  /**
   * @notice Allows the owner to assign a baseURI to use for the tokenURI instead of the default `ipfs://`.
   * @param baseURIOverride The new base URI to use for all NFTs in this collection.
   */
  function updateBaseURI(string calldata baseURIOverride) external onlyOwner {
    baseURI_ = baseURIOverride;
    emit BaseURIUpdated(baseURIOverride);
  }
  /**
   * @notice Allows the owner to set a max tokenID.
   * This provides a guarantee to collectors about the limit of this collection contract, if applicable.
   * @dev Once this value has been set, it may be decreased but can never be increased.
   * This max may be more than the final `totalSupply` if 1 or more tokens were burned.
   * @param _maxTokenId The max tokenId to set, all NFTs must have a tokenId less than or equal to this value.
   */
  function updateMaxTokenId(uint32 _maxTokenId) external onlyOwner {
    _updateMaxTokenId(_maxTokenId);
  }
  function _burn(uint256 tokenId) internal override(ERC721Upgradeable, SequentialMintCollection) {
    delete cidToMinted[_tokenCIDs[tokenId]];
    delete tokenIdToCreatorPaymentAddress[tokenId];
    delete _tokenCIDs[tokenId];
    super._burn(tokenId);
  }
  function _mint(string calldata tokenCID) private onlyOwner returns (uint256 tokenId) {
    require(bytes(tokenCID).length != 0, "NFTCollection: tokenCID is required");
    require(cidToMinted[tokenCID] == 0, "NFTCollection: NFT was already minted");
    // Number of tokens cannot realistically overflow 32 bits.
    tokenId = ++latestTokenId;
    require(maxTokenId == 0 || tokenId <= maxTokenId, "NFTCollection: Max token count has already been minted");
    cidToMinted[tokenCID] = 1;
    _tokenCIDs[tokenId] = tokenCID;
    _safeMint(msg.sender, tokenId);
    emit Minted(msg.sender, tokenId, tokenCID, tokenCID);
  }
  /**
   * @notice The base URI used for all NFTs in this collection.
   * @dev The `tokenCID` is appended to this to obtain an NFT's `tokenURI`.
   *      e.g. The URI for a token with the `tokenCID`: "foo" and `baseURI`: "ipfs://" is "ipfs://foo".
   * @return uri The base URI used by this collection.
   */
  function baseURI() external view returns (string memory uri) {
    uri = _baseURI();
  }
  /**
   * @notice Checks if the creator has already minted a given NFT using this collection contract.
   * @param tokenCID The CID to check for.
   * @return hasBeenMinted True if the creator has already minted an NFT with this CID.
   */
  function getHasMintedCID(string calldata tokenCID) external view returns (bool hasBeenMinted) {
    hasBeenMinted = cidToMinted[tokenCID] != 0;
  }
  /**
   * @inheritdoc CollectionRoyalties
   */
  function getTokenCreatorPaymentAddress(uint256 tokenId)
    public
    view
    override
    returns (address payable creatorPaymentAddress)
  {
    creatorPaymentAddress = tokenIdToCreatorPaymentAddress[tokenId];
    if (creatorPaymentAddress == address(0)) {
      creatorPaymentAddress = owner;
    }
  }
  /**
   * @inheritdoc IERC165Upgradeable
   */
  function supportsInterface(bytes4 interfaceId)
    public
    view
    override(ERC165Upgradeable, ERC721Upgradeable, CollectionRoyalties)
    returns (bool interfaceSupported)
  {
    // This is a no-op function required to avoid compile errors.
    interfaceSupported = super.supportsInterface(interfaceId);
  }
  /**
   * @inheritdoc IERC721MetadataUpgradeable
   */
  function tokenURI(uint256 tokenId) public view override returns (string memory uri) {
    require(_exists(tokenId), "NFTCollection: URI query for nonexistent token");
    uri = string.concat(_baseURI(), _tokenCIDs[tokenId]);
  }
  function _baseURI() internal view override returns (string memory uri) {
    uri = baseURI_;
    if (bytes(uri).length == 0) {
      uri = "ipfs://";
    }
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
struct CallWithoutValue {
  address target;
  bytes callData;
}
/**
 * @title A library for address helpers not already covered by the OZ library.
 * @author batu-inal & HardlyDifficult
 */
library AddressLibrary {
  using AddressUpgradeable for address;
  using AddressUpgradeable for address payable;
  /**
   * @notice Calls an external contract with arbitrary data and parse the return value into an address.
   * @param externalContract The address of the contract to call.
   * @param callData The data to send to the contract.
   * @return contractAddress The address of the contract returned by the call.
   */
  function callAndReturnContractAddress(address externalContract, bytes calldata callData)
    internal
    returns (address payable contractAddress)
  {
    bytes memory returnData = externalContract.functionCall(callData);
    contractAddress = abi.decode(returnData, (address));
    require(contractAddress.isContract(), "InternalProxyCall: did not return a contract");
  }
  function callAndReturnContractAddress(CallWithoutValue calldata call)
    internal
    returns (address payable contractAddress)
  {
    contractAddress = callAndReturnContractAddress(call.target, call.callData);
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/**
 * @author batu-inal & HardlyDifficult
 */
interface INFTCollectionInitializer {
  function initialize(
    address payable _creator,
    string memory _name,
    string memory _symbol
  ) external;
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol";
import "../../interfaces/standards/royalties/ITokenCreator.sol";
/**
 * @title Extends the OZ ERC721 implementation for collections which mint sequential token IDs.
 * @author batu-inal & HardlyDifficult
 */
abstract contract SequentialMintCollection is ITokenCreator, Initializable, ERC721BurnableUpgradeable {
  /****** Slot 0 (after inheritance) ******/
  /**
   * @notice The creator/owner of this NFT collection.
   * @dev This is the default royalty recipient if a different `paymentAddress` was not provided.
   * @return The collection's creator/owner address.
   */
  address payable public owner;
  /**
   * @notice The tokenId of the most recently created NFT.
   * @dev Minting starts at tokenId 1. Each mint will use this value + 1.
   * @return The most recently minted tokenId, or 0 if no NFTs have been minted yet.
   */
  uint32 public latestTokenId;
  /**
   * @notice The max tokenId which can be minted.
   * @dev This max may be less than the final `totalSupply` if 1 or more tokens were burned.
   * @return The max tokenId which can be minted.
   */
  uint32 public maxTokenId;
  /**
   * @notice Tracks how many tokens have been burned.
   * @dev This number is used to calculate the total supply efficiently.
   */
  uint32 private burnCounter;
  /****** End of storage ******/
  /**
   * @notice Emitted when the max tokenId supported by this collection is updated.
   * @param maxTokenId The new max tokenId. All NFTs in this collection will have a tokenId less than
   * or equal to this value.
   */
  event MaxTokenIdUpdated(uint256 indexed maxTokenId);
  /**
   * @notice Emitted when this collection is self destructed by the creator/owner/admin.
   * @param admin The account which requested this contract be self destructed.
   */
  event SelfDestruct(address indexed admin);
  modifier onlyOwner() {
    require(msg.sender == owner, "SequentialMintCollection: Caller is not owner");
    _;
  }
  function _initializeSequentialMintCollection(address payable _creator, uint32 _maxTokenId) internal onlyInitializing {
    owner = _creator;
    maxTokenId = _maxTokenId;
  }
  /**
   * @notice Allows the collection owner to destroy this contract only if
   * no NFTs have been minted yet or the minted NFTs have been burned.
   */
  function _selfDestruct() internal {
    require(totalSupply() == 0, "SequentialMintCollection: Any NFTs minted must be burned first");
    emit SelfDestruct(msg.sender);
    selfdestruct(payable(msg.sender));
  }
  /**
   * @notice Allows the owner to set a max tokenID.
   * This provides a guarantee to collectors about the limit of this collection contract, if applicable.
   * @dev Once this value has been set, it may be decreased but can never be increased.
   * @param _maxTokenId The max tokenId to set, all NFTs must have a tokenId less than or equal to this value.
   */
  function _updateMaxTokenId(uint32 _maxTokenId) internal {
    require(_maxTokenId != 0, "SequentialMintCollection: Max token ID may not be cleared");
    require(maxTokenId == 0 || _maxTokenId < maxTokenId, "SequentialMintCollection: Max token ID may not increase");
    require(latestTokenId <= _maxTokenId, "SequentialMintCollection: Max token ID must be >= last mint");
    maxTokenId = _maxTokenId;
    emit MaxTokenIdUpdated(_maxTokenId);
  }
  function _burn(uint256 tokenId) internal virtual override {
    unchecked {
      // Number of burned tokens cannot exceed latestTokenId which is the same size.
      ++burnCounter;
    }
    super._burn(tokenId);
  }
  /**
   * @inheritdoc ITokenCreator
   * @dev The tokenId param is ignored since all NFTs return the same value.
   */
  function tokenCreator(
    uint256 /* tokenId */
  ) external view returns (address payable creator) {
    creator = owner;
  }
  /**
   * @notice Returns the total amount of tokens stored by the contract.
   * @dev From the ERC-721 enumerable standard.
   * @return supply The total number of NFTs tracked by this contract.
   */
  function totalSupply() public view returns (uint256 supply) {
    unchecked {
      // Number of tokens minted is always >= burned tokens.
      supply = latestTokenId - burnCounter;
    }
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
import "../../interfaces/standards/royalties/IGetFees.sol";
import "../../interfaces/standards/royalties/IGetRoyalties.sol";
import "../../interfaces/standards/royalties/IRoyaltyInfo.sol";
import "../../interfaces/standards/royalties/ITokenCreator.sol";
import "../shared/Constants.sol";
/**
 * @title Defines various royalty APIs for broad marketplace support.
 * @author batu-inal & HardlyDifficult
 */
abstract contract CollectionRoyalties is IGetRoyalties, IGetFees, IRoyaltyInfo, ITokenCreator, ERC165Upgradeable {
  /**
   * @inheritdoc IGetFees
   */
  function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory recipients) {
    recipients = new address payable[](1);
    recipients[0] = getTokenCreatorPaymentAddress(tokenId);
  }
  /**
   * @inheritdoc IGetFees
   * @dev The tokenId param is ignored since all NFTs return the same value.
   */
  function getFeeBps(
    uint256 /* tokenId */
  ) external pure returns (uint256[] memory royaltiesInBasisPoints) {
    royaltiesInBasisPoints = new uint256[](1);
    royaltiesInBasisPoints[0] = ROYALTY_IN_BASIS_POINTS;
  }
  /**
   * @inheritdoc IGetRoyalties
   */
  function getRoyalties(uint256 tokenId)
    external
    view
    returns (address payable[] memory recipients, uint256[] memory royaltiesInBasisPoints)
  {
    recipients = new address payable[](1);
    recipients[0] = getTokenCreatorPaymentAddress(tokenId);
    royaltiesInBasisPoints = new uint256[](1);
    royaltiesInBasisPoints[0] = ROYALTY_IN_BASIS_POINTS;
  }
  /**
   * @notice The address to pay the creator proceeds/royalties for the collection.
   * @param tokenId The ID of the NFT to get the creator payment address for.
   * @return creatorPaymentAddress The address to which royalties should be paid.
   */
  function getTokenCreatorPaymentAddress(uint256 tokenId)
    public
    view
    virtual
    returns (address payable creatorPaymentAddress);
  /**
   * @inheritdoc IRoyaltyInfo
   */
  function royaltyInfo(uint256 tokenId, uint256 salePrice)
    external
    view
    returns (address receiver, uint256 royaltyAmount)
  {
    receiver = getTokenCreatorPaymentAddress(tokenId);
    unchecked {
      royaltyAmount = salePrice / ROYALTY_RATIO;
    }
  }
  /**
   * @inheritdoc IERC165Upgradeable
   * @dev Checks the supported royalty interfaces.
   */
  function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool interfaceSupported) {
    interfaceSupported = (interfaceId == type(IRoyaltyInfo).interfaceId ||
      interfaceId == type(ITokenCreator).interfaceId ||
      interfaceId == type(IGetRoyalties).interfaceId ||
      interfaceId == type(IGetFees).interfaceId ||
      super.supportsInterface(interfaceId));
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
/**
 * @title Stores a reference to the factory which is used to create contract proxies.
 * @author batu-inal & HardlyDifficult
 */
abstract contract ContractFactory {
  using AddressUpgradeable for address;
  /**
   * @notice The address of the factory which was used to create this contract.
   * @return The factory contract address.
   */
  address public immutable contractFactory;
  modifier onlyContractFactory() {
    require(msg.sender == contractFactory, "ContractFactory: Caller is not the factory");
    _;
  }
  /**
   * @notice Initialize the template's immutable variables.
   * @param _contractFactory The factory which will be used to create these contracts.
   */
  constructor(address _contractFactory) {
    require(_contractFactory.isContract(), "ContractFactory: Factory is not a contract");
    contractFactory = _contractFactory;
  }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
interface IGetRoyalties {
  /**
   * @notice Get the creator royalties to be sent.
   * @dev The data is the same as when calling `getFeeRecipients` and `getFeeBps` separately.
   * @param tokenId The ID of the NFT to get royalties for.
   * @return recipients An array of addresses to which royalties should be sent.
   * @return royaltiesInBasisPoints The array of fees to be sent to each recipient, in basis points.
   */
  function getRoyalties(uint256 tokenId)
    external
    view
    returns (address payable[] memory recipients, uint256[] memory royaltiesInBasisPoints);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
interface ITokenCreator {
  /**
   * @notice Returns the creator of this NFT collection.
   * @param tokenId The ID of the NFT to get the creator payment address for.
   * @return creator The creator of this collection.
   */
  function tokenCreator(uint256 tokenId) external view returns (address payable creator);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/**
 * @notice An interface for communicating fees to 3rd party marketplaces.
 * @dev Originally implemented in mainnet contract 0x44d6e8933f8271abcf253c72f9ed7e0e4c0323b3
 */
interface IGetFees {
  /**
   * @notice Get the recipient addresses to which creator royalties should be sent.
   * @dev The expected royalty amounts are communicated with `getFeeBps`.
   * @param tokenId The ID of the NFT to get royalties for.
   * @return recipients An array of addresses to which royalties should be sent.
   */
  function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory recipients);
  /**
   * @notice Get the creator royalty amounts to be sent to each recipient, in basis points.
   * @dev The expected recipients are communicated with `getFeeRecipients`.
   * @param tokenId The ID of the NFT to get royalties for.
   * @return royaltiesInBasisPoints The array of fees to be sent to each recipient, in basis points.
   */
  function getFeeBps(uint256 tokenId) external view returns (uint256[] memory royaltiesInBasisPoints);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/**
 * @notice Interface for EIP-2981: NFT Royalty Standard.
 * For more see: https://eips.ethereum.org/EIPS/eip-2981.
 */
interface IRoyaltyInfo {
  /**
   * @notice Get the creator royalties to be sent.
   * @param tokenId The ID of the NFT to get royalties for.
   * @param salePrice The total price of the sale.
   * @return receiver The address to which royalties should be sent.
   * @return royaltyAmount The total amount that should be sent to the `receiver`.
   */
  function royaltyInfo(uint256 tokenId, uint256 salePrice)
    external
    view
    returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
    }
    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721Upgradeable.sol";
import "./IERC721ReceiverUpgradeable.sol";
import "./extensions/IERC721MetadataUpgradeable.sol";
import "../../utils/AddressUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../utils/StringsUpgradeable.sol";
import "../../utils/introspection/ERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable {
    using AddressUpgradeable for address;
    using StringsUpgradeable for uint256;
    // Token name
    string private _name;
    // Token symbol
    string private _symbol;
    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;
    // Mapping owner address to token count
    mapping(address => uint256) private _balances;
    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;
    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;
    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC721_init_unchained(name_, symbol_);
    }
    function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        _name = name_;
        _symbol = symbol_;
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
        return
            interfaceId == type(IERC721Upgradeable).interfaceId ||
            interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||
            super.supportsInterface(interfaceId);
    }
    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }
    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }
    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }
    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }
    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);
        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }
    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }
    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721Upgradeable.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");
        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner nor approved for all"
        );
        _approve(to, tokenId);
    }
    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);
        return _tokenApprovals[tokenId];
    }
    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }
    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }
    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
        _transfer(from, to, tokenId);
    }
    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }
    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
        _safeTransfer(from, to, tokenId, data);
    }
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }
    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }
    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721Upgradeable.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }
    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }
    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }
    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");
        _beforeTokenTransfer(address(0), to, tokenId);
        _balances[to] += 1;
        _owners[tokenId] = to;
        emit Transfer(address(0), to, tokenId);
        _afterTokenTransfer(address(0), to, tokenId);
    }
    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721Upgradeable.ownerOf(tokenId);
        _beforeTokenTransfer(owner, address(0), tokenId);
        // Clear approvals
        _approve(address(0), tokenId);
        _balances[owner] -= 1;
        delete _owners[tokenId];
        emit Transfer(owner, address(0), tokenId);
        _afterTokenTransfer(owner, address(0), tokenId);
    }
    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721Upgradeable.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");
        _beforeTokenTransfer(from, to, tokenId);
        // Clear approvals from the previous owner
        _approve(address(0), tokenId);
        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;
        emit Transfer(from, to, tokenId);
        _afterTokenTransfer(from, to, tokenId);
    }
    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721Upgradeable.ownerOf(tokenId), to, tokenId);
    }
    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }
    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }
    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }
    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[44] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/extensions/ERC721Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC721Upgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";
/**
 * @title ERC721 Burnable Token
 * @dev ERC721 Token that can be burned (destroyed).
 */
abstract contract ERC721BurnableUpgradeable is Initializable, ContextUpgradeable, ERC721Upgradeable {
    function __ERC721Burnable_init() internal onlyInitializing {
    }
    function __ERC721Burnable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Burns `tokenId`. See {ERC721-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public virtual {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
        _burn(tokenId);
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
 * @dev String operations.
 */
library StringsUpgradeable {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721ReceiverUpgradeable {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721Upgradeable.sol";
/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity ^0.8.12;
/// Constant values shared across mixins.
/**
 * @dev 100% in basis points.
 */
uint256 constant BASIS_POINTS = 10_000;
/**
 * @dev The default admin role defined by OZ ACL modules.
 */
bytes32 constant DEFAULT_ADMIN_ROLE = 0x00;
/**
 * @dev Cap the number of royalty recipients.
 * A cap is required to ensure gas costs are not too high when a sale is settled.
 */
uint256 constant MAX_ROYALTY_RECIPIENTS = 5;
/**
 * @dev The minimum increase of 10% required when making an offer or placing a bid.
 */
uint256 constant MIN_PERCENT_INCREMENT_DENOMINATOR = BASIS_POINTS / 1_000;
/**
 * @dev The gas limit used when making external read-only calls.
 * This helps to ensure that external calls does not prevent the market from executing.
 */
uint256 constant READ_ONLY_GAS_LIMIT = 40_000;
/**
 * @dev Default royalty cut paid out on secondary sales.
 * Set to 10% of the secondary sale.
 */
uint96 constant ROYALTY_IN_BASIS_POINTS = 1_000;
/**
 * @dev 10%, expressed as a denominator for more efficient calculations.
 */
uint256 constant ROYALTY_RATIO = BASIS_POINTS / ROYALTY_IN_BASIS_POINTS;
/**
 * @dev The gas limit to send ETH to multiple recipients, enough for a 5-way split.
 */
uint256 constant SEND_VALUE_GAS_LIMIT_MULTIPLE_RECIPIENTS = 210_000;
/**
 * @dev The gas limit to send ETH to a single recipient, enough for a contract with a simple receiver.
 */
uint256 constant SEND_VALUE_GAS_LIMIT_SINGLE_RECIPIENT = 20_000;
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../contracts/NFTCollection.sol";
contract $NFTCollection is NFTCollection {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor(address _contractFactory) NFTCollection(_contractFactory) {}
    function $_burn(uint256 tokenId) external {
        return super._burn(tokenId);
    }
    function $_baseURI() external view returns (string memory) {
        return super._baseURI();
    }
    function $_initializeSequentialMintCollection(address payable _creator,uint32 _maxTokenId) external {
        return super._initializeSequentialMintCollection(_creator,_maxTokenId);
    }
    function $_selfDestruct() external {
        return super._selfDestruct();
    }
    function $_updateMaxTokenId(uint32 _maxTokenId) external {
        return super._updateMaxTokenId(_maxTokenId);
    }
    function $__ERC721Burnable_init() external {
        return super.__ERC721Burnable_init();
    }
    function $__ERC721Burnable_init_unchained() external {
        return super.__ERC721Burnable_init_unchained();
    }
    function $__ERC721_init(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init(name_,symbol_);
    }
    function $__ERC721_init_unchained(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init_unchained(name_,symbol_);
    }
    function $_safeTransfer(address from,address to,uint256 tokenId,bytes calldata data) external {
        return super._safeTransfer(from,to,tokenId,data);
    }
    function $_exists(uint256 tokenId) external view returns (bool) {
        return super._exists(tokenId);
    }
    function $_isApprovedOrOwner(address spender,uint256 tokenId) external view returns (bool) {
        return super._isApprovedOrOwner(spender,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId) external {
        return super._safeMint(to,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId,bytes calldata data) external {
        return super._safeMint(to,tokenId,data);
    }
    function $_mint(address to,uint256 tokenId) external {
        return super._mint(to,tokenId);
    }
    function $_transfer(address from,address to,uint256 tokenId) external {
        return super._transfer(from,to,tokenId);
    }
    function $_approve(address to,uint256 tokenId) external {
        return super._approve(to,tokenId);
    }
    function $_setApprovalForAll(address owner,address operator,bool approved) external {
        return super._setApprovalForAll(owner,operator,approved);
    }
    function $_requireMinted(uint256 tokenId) external view {
        return super._requireMinted(tokenId);
    }
    function $_beforeTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._beforeTokenTransfer(from,to,tokenId);
    }
    function $_afterTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._afterTokenTransfer(from,to,tokenId);
    }
    function $__ERC165_init() external {
        return super.__ERC165_init();
    }
    function $__ERC165_init_unchained() external {
        return super.__ERC165_init_unchained();
    }
    function $__Context_init() external {
        return super.__Context_init();
    }
    function $__Context_init_unchained() external {
        return super.__Context_init_unchained();
    }
    function $_msgSender() external view returns (address) {
        return super._msgSender();
    }
    function $_msgData() external view returns (bytes memory) {
        return super._msgData();
    }
    function $_disableInitializers() external {
        return super._disableInitializers();
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/interfaces/internal/INFTCollectionInitializer.sol";
abstract contract $INFTCollectionInitializer is INFTCollectionInitializer {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/IGetFees.sol";
abstract contract $IGetFees is IGetFees {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/IGetRoyalties.sol";
abstract contract $IGetRoyalties is IGetRoyalties {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/IRoyaltyInfo.sol";
abstract contract $IRoyaltyInfo is IRoyaltyInfo {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../../contracts/interfaces/standards/royalties/ITokenCreator.sol";
abstract contract $ITokenCreator is ITokenCreator {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../contracts/libraries/AddressLibrary.sol";
contract $AddressLibrary {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    event $callAndReturnContractAddress_address_bytes_Returned(address payable arg0);
    event $callAndReturnContractAddress_CallWithoutValue_Returned(address payable arg0);
    constructor() {}
    function $callAndReturnContractAddress(address externalContract,bytes calldata callData) external payable returns (address payable) {
        (address payable ret0) = AddressLibrary.callAndReturnContractAddress(externalContract,callData);
        emit $callAndReturnContractAddress_address_bytes_Returned(ret0);
        return (ret0);
    }
    function $callAndReturnContractAddress(CallWithoutValue calldata call) external payable returns (address payable) {
        (address payable ret0) = AddressLibrary.callAndReturnContractAddress(call);
        emit $callAndReturnContractAddress_CallWithoutValue_Returned(ret0);
        return (ret0);
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/collections/CollectionRoyalties.sol";
abstract contract $CollectionRoyalties is CollectionRoyalties {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    function $__ERC165_init() external {
        return super.__ERC165_init();
    }
    function $__ERC165_init_unchained() external {
        return super.__ERC165_init_unchained();
    }
    function $_disableInitializers() external {
        return super._disableInitializers();
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/collections/SequentialMintCollection.sol";
contract $SequentialMintCollection is SequentialMintCollection {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor() {}
    function $_initializeSequentialMintCollection(address payable _creator,uint32 _maxTokenId) external {
        return super._initializeSequentialMintCollection(_creator,_maxTokenId);
    }
    function $_selfDestruct() external {
        return super._selfDestruct();
    }
    function $_updateMaxTokenId(uint32 _maxTokenId) external {
        return super._updateMaxTokenId(_maxTokenId);
    }
    function $_burn(uint256 tokenId) external {
        return super._burn(tokenId);
    }
    function $__ERC721Burnable_init() external {
        return super.__ERC721Burnable_init();
    }
    function $__ERC721Burnable_init_unchained() external {
        return super.__ERC721Burnable_init_unchained();
    }
    function $__ERC721_init(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init(name_,symbol_);
    }
    function $__ERC721_init_unchained(string calldata name_,string calldata symbol_) external {
        return super.__ERC721_init_unchained(name_,symbol_);
    }
    function $_baseURI() external view returns (string memory) {
        return super._baseURI();
    }
    function $_safeTransfer(address from,address to,uint256 tokenId,bytes calldata data) external {
        return super._safeTransfer(from,to,tokenId,data);
    }
    function $_exists(uint256 tokenId) external view returns (bool) {
        return super._exists(tokenId);
    }
    function $_isApprovedOrOwner(address spender,uint256 tokenId) external view returns (bool) {
        return super._isApprovedOrOwner(spender,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId) external {
        return super._safeMint(to,tokenId);
    }
    function $_safeMint(address to,uint256 tokenId,bytes calldata data) external {
        return super._safeMint(to,tokenId,data);
    }
    function $_mint(address to,uint256 tokenId) external {
        return super._mint(to,tokenId);
    }
    function $_transfer(address from,address to,uint256 tokenId) external {
        return super._transfer(from,to,tokenId);
    }
    function $_approve(address to,uint256 tokenId) external {
        return super._approve(to,tokenId);
    }
    function $_setApprovalForAll(address owner,address operator,bool approved) external {
        return super._setApprovalForAll(owner,operator,approved);
    }
    function $_requireMinted(uint256 tokenId) external view {
        return super._requireMinted(tokenId);
    }
    function $_beforeTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._beforeTokenTransfer(from,to,tokenId);
    }
    function $_afterTokenTransfer(address from,address to,uint256 tokenId) external {
        return super._afterTokenTransfer(from,to,tokenId);
    }
    function $__ERC165_init() external {
        return super.__ERC165_init();
    }
    function $__ERC165_init_unchained() external {
        return super.__ERC165_init_unchained();
    }
    function $__Context_init() external {
        return super.__Context_init();
    }
    function $__Context_init_unchained() external {
        return super.__Context_init_unchained();
    }
    function $_msgSender() external view returns (address) {
        return super._msgSender();
    }
    function $_msgData() external view returns (bytes memory) {
        return super._msgData();
    }
    function $_disableInitializers() external {
        return super._disableInitializers();
    }
    receive() external payable {}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/shared/Constants.sol";
// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.6.0;
import "../../../contracts/mixins/shared/ContractFactory.sol";
contract $ContractFactory is ContractFactory {
    bytes32 public __hh_exposed_bytecode_marker = "hardhat-exposed";
    constructor(address _contractFactory) ContractFactory(_contractFactory) {}
    receive() external payable {}
}