pragma solidity ^0.4.13;

library SafeMath {

  /**
  * @dev Multiplies two numbers, throws on overflow.
  */
  function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    if (a == 0) {
      return 0;
    }
    c = a * b;
    assert(c / a == b);
    return c;
  }

  /**
  * @dev Integer division of two numbers, truncating the quotient.
  */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    // assert(b > 0); // Solidity automatically throws when dividing by 0
    // uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return a / b;
  }

  /**
  * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  /**
  * @dev Adds two numbers, throws on overflow.
  */
  function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
    c = a + b;
    assert(c >= a);
    return c;
  }
}

contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    require(newOwner != address(0));
    emit OwnershipTransferred(owner, newOwner);
    owner = newOwner;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }
}

contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender)
    public view returns (uint256);

  function transferFrom(address from, address to, uint256 value)
    public returns (bool);

  function approve(address spender, uint256 value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

library ArrayUtils {

    /**
     * Replace bytes in an array with bytes in another array, guarded by a bitmask
     * Efficiency of this function is a bit unpredictable because of the EVM's word-specific model (arrays under 32 bytes will be slower)
     * 
     * @dev Mask must be the size of the byte array. A nonzero byte means the byte array can be changed.
     * @param array The original array
     * @param desired The target array
     * @param mask The mask specifying which bits can be changed
     * @return The updated byte array (the parameter will be modified inplace)
     */
    function guardedArrayReplace(bytes memory array, bytes memory desired, bytes memory mask)
        internal
        pure
    {
        require(array.length == desired.length);
        require(array.length == mask.length);

        uint words = array.length / 0x20;
        uint index = words * 0x20;
        assert(index / 0x20 == words);
        uint i;

        for (i = 0; i < words; i++) {
            /* Conceptually: array[i] = (!mask[i] && array[i]) || (mask[i] && desired[i]), bitwise in word chunks. */
            assembly {
                let commonIndex := mul(0x20, add(1, i))
                let maskValue := mload(add(mask, commonIndex))
                mstore(add(array, commonIndex), or(and(not(maskValue), mload(add(array, commonIndex))), and(maskValue, mload(add(desired, commonIndex)))))
            }
        }

        /* Deal with the last section of the byte array. */
        if (words > 0) {
            /* This overlaps with bytes already set but is still more efficient than iterating through each of the remaining bytes individually. */
            i = words;
            assembly {
                let commonIndex := mul(0x20, add(1, i))
                let maskValue := mload(add(mask, commonIndex))
                mstore(add(array, commonIndex), or(and(not(maskValue), mload(add(array, commonIndex))), and(maskValue, mload(add(desired, commonIndex)))))
            }
        } else {
            /* If the byte array is shorter than a word, we must unfortunately do the whole thing bytewise.
               (bounds checks could still probably be optimized away in assembly, but this is a rare case) */
            for (i = index; i < array.length; i++) {
                array[i] = ((mask[i] ^ 0xff) & array[i]) | (mask[i] & desired[i]);
            }
        }
    }

    /**
     * Test if two arrays are equal
     * Source: https://github.com/GNSPS/solidity-bytes-utils/blob/master/contracts/BytesLib.sol
     * 
     * @dev Arrays must be of equal length, otherwise will return false
     * @param a First array
     * @param b Second array
     * @return Whether or not all bytes in the arrays are equal
     */
    function arrayEq(bytes memory a, bytes memory b)
        internal
        pure
        returns (bool)
    {
        bool success = true;

        assembly {
            let length := mload(a)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(b))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(a, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(b, 0x20)
                // the next line is the loop condition:
                // while(uint(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    /**
     * Unsafe write byte array into a memory location
     *
     * @param index Memory location
     * @param source Byte array to write
     * @return End memory index
     */
    function unsafeWriteBytes(uint index, bytes source)
        internal
        pure
        returns (uint)
    {
        if (source.length > 0) {
            assembly {
                let length := mload(source)
                let end := add(source, add(0x20, length))
                let arrIndex := add(source, 0x20)
                let tempIndex := index
                for { } eq(lt(arrIndex, end), 1) {
                    arrIndex := add(arrIndex, 0x20)
                    tempIndex := add(tempIndex, 0x20)
                } {
                    mstore(tempIndex, mload(arrIndex))
                }
                index := add(index, length)
            }
        }
        return index;
    }

    /**
     * Unsafe write address into a memory location
     *
     * @param index Memory location
     * @param source Address to write
     * @return End memory index
     */
    function unsafeWriteAddress(uint index, address source)
        internal
        pure
        returns (uint)
    {
        uint conv = uint(source) << 0x60;
        assembly {
            mstore(index, conv)
            index := add(index, 0x14)
        }
        return index;
    }

    /**
     * Unsafe write uint into a memory location
     *
     * @param index Memory location
     * @param source uint to write
     * @return End memory index
     */
    function unsafeWriteUint(uint index, uint source)
        internal
        pure
        returns (uint)
    {
        assembly {
            mstore(index, source)
            index := add(index, 0x20)
        }
        return index;
    }

    /**
     * Unsafe write uint8 into a memory location
     *
     * @param index Memory location
     * @param source uint8 to write
     * @return End memory index
     */
    function unsafeWriteUint8(uint index, uint8 source)
        internal
        pure
        returns (uint)
    {
        assembly {
            mstore8(index, source)
            index := add(index, 0x1)
        }
        return index;
    }

}

contract ReentrancyGuarded {

    bool reentrancyLock = false;

    /* Prevent a contract function from being reentrant-called. */
    modifier reentrancyGuard {
        if (reentrancyLock) {
            revert();
        }
        reentrancyLock = true;
        _;
        reentrancyLock = false;
    }

}

contract TokenRecipient {
    event ReceivedEther(address indexed sender, uint amount);
    event ReceivedTokens(address indexed from, uint256 value, address indexed token, bytes extraData);

    /**
     * @dev Receive tokens and generate a log event
     * @param from Address from which to transfer tokens
     * @param value Amount of tokens to transfer
     * @param token Address of token
     * @param extraData Additional data to log
     */
    function receiveApproval(address from, uint256 value, address token, bytes extraData) public {
        ERC20 t = ERC20(token);
        require(t.transferFrom(from, this, value));
        emit ReceivedTokens(from, value, token, extraData);
    }

    /**
     * @dev Receive Ether and generate a log event
     */
    function () payable public {
        emit ReceivedEther(msg.sender, msg.value);
    }
}

contract ExchangeCore is ReentrancyGuarded, Ownable {

    /* The token used to pay exchange fees. */
    ERC20 public exchangeToken;

    /* User registry. */
    ProxyRegistry public registry;

    /* Token transfer proxy. */
    TokenTransferProxy public tokenTransferProxy;

    /* Cancelled / finalized orders, by hash. */
    mapping(bytes32 => bool) public cancelledOrFinalized;

    /* Orders verified by on-chain approval (alternative to ECDSA signatures so that smart contracts can place orders directly). */
    mapping(bytes32 => bool) public approvedOrders;

    /* For split fee orders, minimum required protocol maker fee, in basis points. Paid to owner (who can change it). */
    uint public minimumMakerProtocolFee = 0;

    /* For split fee orders, minimum required protocol taker fee, in basis points. Paid to owner (who can change it). */
    uint public minimumTakerProtocolFee = 0;

    /* Recipient of protocol fees. */
    address public protocolFeeRecipient;

    /* Fee method: protocol fee or split fee. */
    enum FeeMethod { ProtocolFee, SplitFee }

    /* Inverse basis point. */
    uint public constant INVERSE_BASIS_POINT = 10000;

    /* An ECDSA signature. */ 
    struct Sig {
        /* v parameter */
        uint8 v;
        /* r parameter */
        bytes32 r;
        /* s parameter */
        bytes32 s;
    }

    /* An order on the exchange. */
    struct Order {
        /* Exchange address, intended as a versioning mechanism. */
        address exchange;
        /* Order maker address. */
        address maker;
        /* Order taker address, if specified. */
        address taker;
        /* Maker relayer fee of the order, unused for taker order. */
        uint makerRelayerFee;
        /* Taker relayer fee of the order, or maximum taker fee for a taker order. */
        uint takerRelayerFee;
        /* Maker protocol fee of the order, unused for taker order. */
        uint makerProtocolFee;
        /* Taker protocol fee of the order, or maximum taker fee for a taker order. */
        uint takerProtocolFee;
        /* Order fee recipient or zero address for taker order. */
        address feeRecipient;
        /* Fee method (protocol token or split fee). */
        FeeMethod feeMethod;
        /* Side (buy/sell). */
        SaleKindInterface.Side side;
        /* Kind of sale. */
        SaleKindInterface.SaleKind saleKind;
        /* Target. */
        address target;
        /* HowToCall. */
        AuthenticatedProxy.HowToCall howToCall;
        /* Calldata. */
        bytes calldata;
        /* Calldata replacement pattern, or an empty byte array for no replacement. */
        bytes replacementPattern;
        /* Static call target, zero-address for no static call. */
        address staticTarget;
        /* Static call extra data. */
        bytes staticExtradata;
        /* Token used to pay for the order, or the zero-address as a sentinel value for Ether. */
        address paymentToken;
        /* Base price of the order (in paymentTokens). */
        uint basePrice;
        /* Auction extra parameter - minimum bid increment for English auctions, starting/ending price difference. */
        uint extra;
        /* Listing timestamp. */
        uint listingTime;
        /* Expiration timestamp - 0 for no expiry. */
        uint expirationTime;
        /* Order salt, used to prevent duplicate hashes. */
        uint salt;
    }
    
    event OrderApprovedPartOne    (bytes32 indexed hash, address exchange, address indexed maker, address taker, uint makerRelayerFee, uint takerRelayerFee, uint makerProtocolFee, uint takerProtocolFee, address indexed feeRecipient, FeeMethod feeMethod, SaleKindInterface.Side side, SaleKindInterface.SaleKind saleKind, address target);
    event OrderApprovedPartTwo    (bytes32 indexed hash, AuthenticatedProxy.HowToCall howToCall, bytes calldata, bytes replacementPattern, address staticTarget, bytes staticExtradata, address paymentToken, uint basePrice, uint extra, uint listingTime, uint expirationTime, uint salt, bool orderbookInclusionDesired);
    event OrderCancelled          (bytes32 indexed hash);
    event OrdersMatched           (bytes32 buyHash, bytes32 sellHash, address indexed maker, address indexed taker, uint price, bytes32 indexed metadata);

    /**
     * @dev Change the minimum maker fee paid to the protocol (owner only)
     * @param newMinimumMakerProtocolFee New fee to set in basis points
     */
    function changeMinimumMakerProtocolFee(uint newMinimumMakerProtocolFee)
        public
        onlyOwner
    {
        minimumMakerProtocolFee = newMinimumMakerProtocolFee;
    }

    /**
     * @dev Change the minimum taker fee paid to the protocol (owner only)
     * @param newMinimumTakerProtocolFee New fee to set in basis points
     */
    function changeMinimumTakerProtocolFee(uint newMinimumTakerProtocolFee)
        public
        onlyOwner
    {
        minimumTakerProtocolFee = newMinimumTakerProtocolFee;
    }

    /**
     * @dev Change the protocol fee recipient (owner only)
     * @param newProtocolFeeRecipient New protocol fee recipient address
     */
    function changeProtocolFeeRecipient(address newProtocolFeeRecipient)
        public
        onlyOwner
    {
        protocolFeeRecipient = newProtocolFeeRecipient;
    }

    /**
     * @dev Transfer tokens
     * @param token Token to transfer
     * @param from Address to charge fees
     * @param to Address to receive fees
     * @param amount Amount of protocol tokens to charge
     */
    function transferTokens(address token, address from, address to, uint amount)
        internal
    {
        if (amount > 0) {
            require(tokenTransferProxy.transferFrom(token, from, to, amount));
        }
    }

    /**
     * @dev Charge a fee in protocol tokens
     * @param from Address to charge fees
     * @param to Address to receive fees
     * @param amount Amount of protocol tokens to charge
     */
    function chargeProtocolFee(address from, address to, uint amount)
        internal
    {
        transferTokens(exchangeToken, from, to, amount);
    }

    /**
     * @dev Execute a STATICCALL (introduced with Ethereum Metropolis, non-state-modifying external call)
     * @param target Contract to call
     * @param calldata Calldata (appended to extradata)
     * @param extradata Base data for STATICCALL (probably function selector and argument encoding)
     * @return The result of the call (success or failure)
     */
    function staticCall(address target, bytes memory calldata, bytes memory extradata)
        public
        view
        returns (bool result)
    {
        bytes memory combined = new bytes(calldata.length + extradata.length);
        uint index;
        assembly {
            index := add(combined, 0x20)
        }
        index = ArrayUtils.unsafeWriteBytes(index, extradata);
        ArrayUtils.unsafeWriteBytes(index, calldata);
        assembly {
            result := staticcall(gas, target, add(combined, 0x20), mload(combined), mload(0x40), 0)
        }
        return result;
    }

    /**
     * Calculate size of an order struct when tightly packed
     *
     * @param order Order to calculate size of
     * @return Size in bytes
     */
    function sizeOf(Order memory order)
        internal
        pure
        returns (uint)
    {
        return ((0x14 * 7) + (0x20 * 9) + 4 + order.calldata.length + order.replacementPattern.length + order.staticExtradata.length);
    }

    /**
     * @dev Hash an order, returning the canonical order hash, without the message prefix
     * @param order Order to hash
     * @return Hash of order
     */
    function hashOrder(Order memory order)
        internal
        pure
        returns (bytes32 hash)
    {
        /* Unfortunately abi.encodePacked doesn't work here, stack size constraints. */
        uint size = sizeOf(order);
        bytes memory array = new bytes(size);
        uint index;
        assembly {
            index := add(array, 0x20)
        }
        index = ArrayUtils.unsafeWriteAddress(index, order.exchange);
        index = ArrayUtils.unsafeWriteAddress(index, order.maker);
        index = ArrayUtils.unsafeWriteAddress(index, order.taker);
        index = ArrayUtils.unsafeWriteUint(index, order.makerRelayerFee);
        index = ArrayUtils.unsafeWriteUint(index, order.takerRelayerFee);
        index = ArrayUtils.unsafeWriteUint(index, order.makerProtocolFee);
        index = ArrayUtils.unsafeWriteUint(index, order.takerProtocolFee);
        index = ArrayUtils.unsafeWriteAddress(index, order.feeRecipient);
        index = ArrayUtils.unsafeWriteUint8(index, uint8(order.feeMethod));
        index = ArrayUtils.unsafeWriteUint8(index, uint8(order.side));
        index = ArrayUtils.unsafeWriteUint8(index, uint8(order.saleKind));
        index = ArrayUtils.unsafeWriteAddress(index, order.target);
        index = ArrayUtils.unsafeWriteUint8(index, uint8(order.howToCall));
        index = ArrayUtils.unsafeWriteBytes(index, order.calldata);
        index = ArrayUtils.unsafeWriteBytes(index, order.replacementPattern);
        index = ArrayUtils.unsafeWriteAddress(index, order.staticTarget);
        index = ArrayUtils.unsafeWriteBytes(index, order.staticExtradata);
        index = ArrayUtils.unsafeWriteAddress(index, order.paymentToken);
        index = ArrayUtils.unsafeWriteUint(index, order.basePrice);
        index = ArrayUtils.unsafeWriteUint(index, order.extra);
        index = ArrayUtils.unsafeWriteUint(index, order.listingTime);
        index = ArrayUtils.unsafeWriteUint(index, order.expirationTime);
        index = ArrayUtils.unsafeWriteUint(index, order.salt);
        assembly {
            hash := keccak256(add(array, 0x20), size)
        }
        return hash;
    }

    /**
     * @dev Hash an order, returning the hash that a client must sign, including the standard message prefix
     * @param order Order to hash
     * @return Hash of message prefix and order hash per Ethereum format
     */
    function hashToSign(Order memory order)
        internal
        pure
        returns (bytes32)
    {
        return keccak256("\x19Ethereum Signed Message:\n32", hashOrder(order));
    }

    /**
     * @dev Assert an order is valid and return its hash
     * @param order Order to validate
     * @param sig ECDSA signature
     */
    function requireValidOrder(Order memory order, Sig memory sig)
        internal
        view
        returns (bytes32)
    {
        bytes32 hash = hashToSign(order);
        require(validateOrder(hash, order, sig));
        return hash;
    }

    /**
     * @dev Validate order parameters (does *not* check signature validity)
     * @param order Order to validate
     */
    function validateOrderParameters(Order memory order)
        internal
        view
        returns (bool)
    {
        /* Order must be targeted at this protocol version (this Exchange contract). */
        if (order.exchange != address(this)) {
            return false;
        }

        /* Order must possess valid sale kind parameter combination. */
        if (!SaleKindInterface.validateParameters(order.saleKind, order.expirationTime)) {
            return false;
        }

        /* If using the split fee method, order must have sufficient protocol fees. */
        if (order.feeMethod == FeeMethod.SplitFee && (order.makerProtocolFee < minimumMakerProtocolFee || order.takerProtocolFee < minimumTakerProtocolFee)) {
            return false;
        }

        return true;
    }

    /**
     * @dev Validate a provided previously approved / signed order, hash, and signature.
     * @param hash Order hash (already calculated, passed to avoid recalculation)
     * @param order Order to validate
     * @param sig ECDSA signature
     */
    function validateOrder(bytes32 hash, Order memory order, Sig memory sig) 
        internal
        view
        returns (bool)
    {
        /* Not done in an if-conditional to prevent unnecessary ecrecover evaluation, which seems to happen even though it should short-circuit. */

        /* Order must have valid parameters. */
        if (!validateOrderParameters(order)) {
            return false;
        }

        /* Order must have not been canceled or already filled. */
        if (cancelledOrFinalized[hash]) {
            return false;
        }
        
        /* Order authentication. Order must be either:
        /* (a) previously approved */
        if (approvedOrders[hash]) {
            return true;
        }

        /* or (b) ECDSA-signed by maker. */
        if (ecrecover(hash, sig.v, sig.r, sig.s) == order.maker) {
            return true;
        }

        return false;
    }

    /**
     * @dev Approve an order and optionally mark it for orderbook inclusion. Must be called by the maker of the order
     * @param order Order to approve
     * @param orderbookInclusionDesired Whether orderbook providers should include the order in their orderbooks
     */
    function approveOrder(Order memory order, bool orderbookInclusionDesired)
        internal
    {
        /* CHECKS */

        /* Assert sender is authorized to approve order. */
        require(msg.sender == order.maker);

        /* Calculate order hash. */
        bytes32 hash = hashToSign(order);

        /* Assert order has not already been approved. */
        require(!approvedOrders[hash]);

        /* EFFECTS */
    
        /* Mark order as approved. */
        approvedOrders[hash] = true;
  
        /* Log approval event. Must be split in two due to Solidity stack size limitations. */
        {
            emit OrderApprovedPartOne(hash, order.exchange, order.maker, order.taker, order.makerRelayerFee, order.takerRelayerFee, order.makerProtocolFee, order.takerProtocolFee, order.feeRecipient, order.feeMethod, order.side, order.saleKind, order.target);
        }
        {   
            emit OrderApprovedPartTwo(hash, order.howToCall, order.calldata, order.replacementPattern, order.staticTarget, order.staticExtradata, order.paymentToken, order.basePrice, order.extra, order.listingTime, order.expirationTime, order.salt, orderbookInclusionDesired);
        }
    }

    /**
     * @dev Cancel an order, preventing it from being matched. Must be called by the maker of the order
     * @param order Order to cancel
     * @param sig ECDSA signature
     */
    function cancelOrder(Order memory order, Sig memory sig) 
        internal
    {
        /* CHECKS */

        /* Calculate order hash. */
        bytes32 hash = requireValidOrder(order, sig);

        /* Assert sender is authorized to cancel order. */
        require(msg.sender == order.maker);
  
        /* EFFECTS */
      
        /* Mark order as cancelled, preventing it from being matched. */
        cancelledOrFinalized[hash] = true;

        /* Log cancel event. */
        emit OrderCancelled(hash);
    }

    /**
     * @dev Calculate the current price of an order (convenience function)
     * @param order Order to calculate the price of
     * @return The current price of the order
     */
    function calculateCurrentPrice (Order memory order)
        internal  
        view
        returns (uint)
    {
        return SaleKindInterface.calculateFinalPrice(order.side, order.saleKind, order.basePrice, order.extra, order.listingTime, order.expirationTime);
    }

    /**
     * @dev Calculate the price two orders would match at, if in fact they would match (otherwise fail)
     * @param buy Buy-side order
     * @param sell Sell-side order
     * @return Match price
     */
    function calculateMatchPrice(Order memory buy, Order memory sell)
        view
        internal
        returns (uint)
    {
        /* Calculate sell price. */
        uint sellPrice = SaleKindInterface.calculateFinalPrice(sell.side, sell.saleKind, sell.basePrice, sell.extra, sell.listingTime, sell.expirationTime);

        /* Calculate buy price. */
        uint buyPrice = SaleKindInterface.calculateFinalPrice(buy.side, buy.saleKind, buy.basePrice, buy.extra, buy.listingTime, buy.expirationTime);

        /* Require price cross. */
        require(buyPrice >= sellPrice);
        
        /* Maker/taker priority. */
        return sell.feeRecipient != address(0) ? sellPrice : buyPrice;
    }

    /**
     * @dev Execute all ERC20 token / Ether transfers associated with an order match (fees and buyer => seller transfer)
     * @param buy Buy-side order
     * @param sell Sell-side order
     */
    function executeFundsTransfer(Order memory buy, Order memory sell)
        internal
        returns (uint)
    {
        /* Only payable in the special case of unwrapped Ether. */
        if (sell.paymentToken != address(0)) {
            require(msg.value == 0);
        }

        /* Calculate match price. */
        uint price = calculateMatchPrice(buy, sell);

        /* If paying using a token (not Ether), transfer tokens. This is done prior to fee payments to that a seller will have tokens before being charged fees. */
        if (price > 0 && sell.paymentToken != address(0)) {
            transferTokens(sell.paymentToken, buy.maker, sell.maker, price);
        }

        /* Amount that will be received by seller (for Ether). */
        uint receiveAmount = price;

        /* Amount that must be sent by buyer (for Ether). */
        uint requiredAmount = price;

        /* Determine maker/taker and charge fees accordingly. */
        if (sell.feeRecipient != address(0)) {
            /* Sell-side order is maker. */
      
            /* Assert taker fee is less than or equal to maximum fee specified by buyer. */
            require(sell.takerRelayerFee <= buy.takerRelayerFee);

            if (sell.feeMethod == FeeMethod.SplitFee) {
                /* Assert taker fee is less than or equal to maximum fee specified by buyer. */
                require(sell.takerProtocolFee <= buy.takerProtocolFee);

                /* Maker fees are deducted from the token amount that the maker receives. Taker fees are extra tokens that must be paid by the taker. */

                if (sell.makerRelayerFee > 0) {
                    uint makerRelayerFee = SafeMath.div(SafeMath.mul(sell.makerRelayerFee, price), INVERSE_BASIS_POINT);
                    if (sell.paymentToken == address(0)) {
                        receiveAmount = SafeMath.sub(receiveAmount, makerRelayerFee);
                        sell.feeRecipient.transfer(makerRelayerFee);
                    } else {
                        transferTokens(sell.paymentToken, sell.maker, sell.feeRecipient, makerRelayerFee);
                    }
                }

                if (sell.takerRelayerFee > 0) {
                    uint takerRelayerFee = SafeMath.div(SafeMath.mul(sell.takerRelayerFee, price), INVERSE_BASIS_POINT);
                    if (sell.paymentToken == address(0)) {
                        requiredAmount = SafeMath.add(requiredAmount, takerRelayerFee);
                        sell.feeRecipient.transfer(takerRelayerFee);
                    } else {
                        transferTokens(sell.paymentToken, buy.maker, sell.feeRecipient, takerRelayerFee);
                    }
                }

                if (sell.makerProtocolFee > 0) {
                    uint makerProtocolFee = SafeMath.div(SafeMath.mul(sell.makerProtocolFee, price), INVERSE_BASIS_POINT);
                    if (sell.paymentToken == address(0)) {
                        receiveAmount = SafeMath.sub(receiveAmount, makerProtocolFee);
                        protocolFeeRecipient.transfer(makerProtocolFee);
                    } else {
                        transferTokens(sell.paymentToken, sell.maker, protocolFeeRecipient, makerProtocolFee);
                    }
                }

                if (sell.takerProtocolFee > 0) {
                    uint takerProtocolFee = SafeMath.div(SafeMath.mul(sell.takerProtocolFee, price), INVERSE_BASIS_POINT);
                    if (sell.paymentToken == address(0)) {
                        requiredAmount = SafeMath.add(requiredAmount, takerProtocolFee);
                        protocolFeeRecipient.transfer(takerProtocolFee);
                    } else {
                        transferTokens(sell.paymentToken, buy.maker, protocolFeeRecipient, takerProtocolFee);
                    }
                }

            } else {
                /* Charge maker fee to seller. */
                chargeProtocolFee(sell.maker, sell.feeRecipient, sell.makerRelayerFee);

                /* Charge taker fee to buyer. */
                chargeProtocolFee(buy.maker, sell.feeRecipient, sell.takerRelayerFee);
            }
        } else {
            /* Buy-side order is maker. */

            /* Assert taker fee is less than or equal to maximum fee specified by seller. */
            require(buy.takerRelayerFee <= sell.takerRelayerFee);

            if (sell.feeMethod == FeeMethod.SplitFee) {
                /* The Exchange does not escrow Ether, so direct Ether can only be used to with sell-side maker / buy-side taker orders. */
                require(sell.paymentToken != address(0));

                /* Assert taker fee is less than or equal to maximum fee specified by seller. */
                require(buy.takerProtocolFee <= sell.takerProtocolFee);

                if (buy.makerRelayerFee > 0) {
                    makerRelayerFee = SafeMath.div(SafeMath.mul(buy.makerRelayerFee, price), INVERSE_BASIS_POINT);
                    transferTokens(sell.paymentToken, buy.maker, buy.feeRecipient, makerRelayerFee);
                }

                if (buy.takerRelayerFee > 0) {
                    takerRelayerFee = SafeMath.div(SafeMath.mul(buy.takerRelayerFee, price), INVERSE_BASIS_POINT);
                    transferTokens(sell.paymentToken, sell.maker, buy.feeRecipient, takerRelayerFee);
                }

                if (buy.makerProtocolFee > 0) {
                    makerProtocolFee = SafeMath.div(SafeMath.mul(buy.makerProtocolFee, price), INVERSE_BASIS_POINT);
                    transferTokens(sell.paymentToken, buy.maker, protocolFeeRecipient, makerProtocolFee);
                }

                if (buy.takerProtocolFee > 0) {
                    takerProtocolFee = SafeMath.div(SafeMath.mul(buy.takerProtocolFee, price), INVERSE_BASIS_POINT);
                    transferTokens(sell.paymentToken, sell.maker, protocolFeeRecipient, takerProtocolFee);
                }

            } else {
                /* Charge maker fee to buyer. */
                chargeProtocolFee(buy.maker, buy.feeRecipient, buy.makerRelayerFee);
      
                /* Charge taker fee to seller. */
                chargeProtocolFee(sell.maker, buy.feeRecipient, buy.takerRelayerFee);
            }
        }

        if (sell.paymentToken == address(0)) {
            /* Special-case Ether, order must be matched by buyer. */
            require(msg.value >= requiredAmount);
            sell.maker.transfer(receiveAmount);
            /* Allow overshoot for variable-price auctions, refund difference. */
            uint diff = SafeMath.sub(msg.value, requiredAmount);
            if (diff > 0) {
                buy.maker.transfer(diff);
            }
        }

        /* This contract should never hold Ether, however, we cannot assert this, since it is impossible to prevent anyone from sending Ether e.g. with selfdestruct. */

        return price;
    }

    /**
     * @dev Return whether or not two orders can be matched with each other by basic parameters (does not check order signatures / calldata or perform static calls)
     * @param buy Buy-side order
     * @param sell Sell-side order
     * @return Whether or not the two orders can be matched
     */
    function ordersCanMatch(Order memory buy, Order memory sell)
        internal
        view
        returns (bool)
    {
        return (
            /* Must be opposite-side. */
            (buy.side == SaleKindInterface.Side.Buy && sell.side == SaleKindInterface.Side.Sell) &&     
            /* Must use same fee method. */
            (buy.feeMethod == sell.feeMethod) &&
            /* Must use same payment token. */
            (buy.paymentToken == sell.paymentToken) &&
            /* Must match maker/taker addresses. */
            (sell.taker == address(0) || sell.taker == buy.maker) &&
            (buy.taker == address(0) || buy.taker == sell.maker) &&
            /* One must be maker and the other must be taker (no bool XOR in Solidity). */
            ((sell.feeRecipient == address(0) && buy.feeRecipient != address(0)) || (sell.feeRecipient != address(0) && buy.feeRecipient == address(0))) &&
            /* Must match target. */
            (buy.target == sell.target) &&
            /* Must match howToCall. */
            (buy.howToCall == sell.howToCall) &&
            /* Buy-side order must be settleable. */
            SaleKindInterface.canSettleOrder(buy.listingTime, buy.expirationTime) &&
            /* Sell-side order must be settleable. */
            SaleKindInterface.canSettleOrder(sell.listingTime, sell.expirationTime)
        );
    }

    /**
     * @dev Atomically match two orders, ensuring validity of the match, and execute all associated state transitions. Protected against reentrancy by a contract-global lock.
     * @param buy Buy-side order
     * @param buySig Buy-side order signature
     * @param sell Sell-side order
     * @param sellSig Sell-side order signature
     */
    function atomicMatch(Order memory buy, Sig memory buySig, Order memory sell, Sig memory sellSig, bytes32 metadata)
        internal
        reentrancyGuard
    {
        /* CHECKS */
      
        /* Ensure buy order validity and calculate hash if necessary. */
        bytes32 buyHash;
        if (buy.maker == msg.sender) {
            require(validateOrderParameters(buy));
        } else {
            buyHash = requireValidOrder(buy, buySig);
        }

        /* Ensure sell order validity and calculate hash if necessary. */
        bytes32 sellHash;
        if (sell.maker == msg.sender) {
            require(validateOrderParameters(sell));
        } else {
            sellHash = requireValidOrder(sell, sellSig);
        }
        
        /* Must be matchable. */
        require(ordersCanMatch(buy, sell));

        /* Target must exist (prevent malicious selfdestructs just prior to order settlement). */
        uint size;
        address target = sell.target;
        assembly {
            size := extcodesize(target)
        }
        require(size > 0);
      
        /* Must match calldata after replacement, if specified. */ 
        if (buy.replacementPattern.length > 0) {
          ArrayUtils.guardedArrayReplace(buy.calldata, sell.calldata, buy.replacementPattern);
        }
        if (sell.replacementPattern.length > 0) {
          ArrayUtils.guardedArrayReplace(sell.calldata, buy.calldata, sell.replacementPattern);
        }
        require(ArrayUtils.arrayEq(buy.calldata, sell.calldata));

        /* Retrieve delegateProxy contract. */
        OwnableDelegateProxy delegateProxy = registry.proxies(sell.maker);

        /* Proxy must exist. */
        require(delegateProxy != address(0));

        /* Assert implementation. */
        require(delegateProxy.implementation() == registry.delegateProxyImplementation());

        /* Access the passthrough AuthenticatedProxy. */
        AuthenticatedProxy proxy = AuthenticatedProxy(delegateProxy);

        /* EFFECTS */

        /* Mark previously signed or approved orders as finalized. */
        if (msg.sender != buy.maker) {
            cancelledOrFinalized[buyHash] = true;
        }
        if (msg.sender != sell.maker) {
            cancelledOrFinalized[sellHash] = true;
        }

        /* INTERACTIONS */

        /* Execute funds transfer and pay fees. */
        uint price = executeFundsTransfer(buy, sell);

        /* Execute specified call through proxy. */
        require(proxy.proxy(sell.target, sell.howToCall, sell.calldata));

        /* Static calls are intentionally done after the effectful call so they can check resulting state. */

        /* Handle buy-side static call if specified. */
        if (buy.staticTarget != address(0)) {
            require(staticCall(buy.staticTarget, sell.calldata, buy.staticExtradata));
        }

        /* Handle sell-side static call if specified. */
        if (sell.staticTarget != address(0)) {
            require(staticCall(sell.staticTarget, sell.calldata, sell.staticExtradata));
        }

        /* Log match event. */
        emit OrdersMatched(buyHash, sellHash, sell.feeRecipient != address(0) ? sell.maker : buy.maker, sell.feeRecipient != address(0) ? buy.maker : sell.maker, price, metadata);
    }

}

contract Exchange is ExchangeCore {

    /**
     * @dev Call guardedArrayReplace - library function exposed for testing.
     */
    function guardedArrayReplace(bytes array, bytes desired, bytes mask)
        public
        pure
        returns (bytes)
    {
        ArrayUtils.guardedArrayReplace(array, desired, mask);
        return array;
    }

    /**
     * Test copy byte array
     *
     * @param arrToCopy Array to copy
     * @return byte array
     */
    function testCopy(bytes arrToCopy)
        public
        pure
        returns (bytes)
    {
        bytes memory arr = new bytes(arrToCopy.length);
        uint index;
        assembly {
            index := add(arr, 0x20)
        }
        ArrayUtils.unsafeWriteBytes(index, arrToCopy);
        return arr;
    }

    /**
     * Test write address to bytes
     *
     * @param addr Address to write
     * @return byte array
     */
    function testCopyAddress(address addr)
        public
        pure
        returns (bytes)
    {
        bytes memory arr = new bytes(0x14);
        uint index;
        assembly {
            index := add(arr, 0x20)
        }
        ArrayUtils.unsafeWriteAddress(index, addr);
        return arr;
    }

    /**
     * @dev Call calculateFinalPrice - library function exposed for testing.
     */
    function calculateFinalPrice(SaleKindInterface.Side side, SaleKindInterface.SaleKind saleKind, uint basePrice, uint extra, uint listingTime, uint expirationTime)
        public
        view
        returns (uint)
    {
        return SaleKindInterface.calculateFinalPrice(side, saleKind, basePrice, extra, listingTime, expirationTime);
    }

    /**
     * @dev Call hashOrder - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function hashOrder_(
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata)
        public
        pure
        returns (bytes32)
    {
        return hashOrder(
          Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8])
        );
    }

    /**
     * @dev Call hashToSign - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function hashToSign_(
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata)
        public
        pure
        returns (bytes32)
    { 
        return hashToSign(
          Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8])
        );
    }

    /**
     * @dev Call validateOrderParameters - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function validateOrderParameters_ (
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata)
        view
        public
        returns (bool)
    {
        Order memory order = Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]);
        return validateOrderParameters(
          order
        );
    }

    /**
     * @dev Call validateOrder - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function validateOrder_ (
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata,
        uint8 v,
        bytes32 r,
        bytes32 s)
        view
        public
        returns (bool)
    {
        Order memory order = Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]);
        return validateOrder(
          hashToSign(order),
          order,
          Sig(v, r, s)
        );
    }

    /**
     * @dev Call approveOrder - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function approveOrder_ (
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata,
        bool orderbookInclusionDesired) 
        public
    {
        Order memory order = Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]);
        return approveOrder(order, orderbookInclusionDesired);
    }

    /**
     * @dev Call cancelOrder - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function cancelOrder_(
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata,
        uint8 v,
        bytes32 r,
        bytes32 s)
        public
    {

        return cancelOrder(
          Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]),
          Sig(v, r, s)
        );
    }

    /**
     * @dev Call calculateCurrentPrice - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function calculateCurrentPrice_(
        address[7] addrs,
        uint[9] uints,
        FeeMethod feeMethod,
        SaleKindInterface.Side side,
        SaleKindInterface.SaleKind saleKind,
        AuthenticatedProxy.HowToCall howToCall,
        bytes calldata,
        bytes replacementPattern,
        bytes staticExtradata)
        public
        view
        returns (uint)
    {
        return calculateCurrentPrice(
          Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], feeMethod, side, saleKind, addrs[4], howToCall, calldata, replacementPattern, addrs[5], staticExtradata, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8])
        );
    }

    /**
     * @dev Call ordersCanMatch - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function ordersCanMatch_(
        address[14] addrs,
        uint[18] uints,
        uint8[8] feeMethodsSidesKindsHowToCalls,
        bytes calldataBuy,
        bytes calldataSell,
        bytes replacementPatternBuy,
        bytes replacementPatternSell,
        bytes staticExtradataBuy,
        bytes staticExtradataSell)
        public
        view
        returns (bool)
    {
        Order memory buy = Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], FeeMethod(feeMethodsSidesKindsHowToCalls[0]), SaleKindInterface.Side(feeMethodsSidesKindsHowToCalls[1]), SaleKindInterface.SaleKind(feeMethodsSidesKindsHowToCalls[2]), addrs[4], AuthenticatedProxy.HowToCall(feeMethodsSidesKindsHowToCalls[3]), calldataBuy, replacementPatternBuy, addrs[5], staticExtradataBuy, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]);
        Order memory sell = Order(addrs[7], addrs[8], addrs[9], uints[9], uints[10], uints[11], uints[12], addrs[10], FeeMethod(feeMethodsSidesKindsHowToCalls[4]), SaleKindInterface.Side(feeMethodsSidesKindsHowToCalls[5]), SaleKindInterface.SaleKind(feeMethodsSidesKindsHowToCalls[6]), addrs[11], AuthenticatedProxy.HowToCall(feeMethodsSidesKindsHowToCalls[7]), calldataSell, replacementPatternSell, addrs[12], staticExtradataSell, ERC20(addrs[13]), uints[13], uints[14], uints[15], uints[16], uints[17]);
        return ordersCanMatch(
          buy,
          sell
        );
    }

    /**
     * @dev Return whether or not two orders' calldata specifications can match
     * @param buyCalldata Buy-side order calldata
     * @param buyReplacementPattern Buy-side order calldata replacement mask
     * @param sellCalldata Sell-side order calldata
     * @param sellReplacementPattern Sell-side order calldata replacement mask
     * @return Whether the orders' calldata can be matched
     */
    function orderCalldataCanMatch(bytes buyCalldata, bytes buyReplacementPattern, bytes sellCalldata, bytes sellReplacementPattern)
        public
        pure
        returns (bool)
    {
        if (buyReplacementPattern.length > 0) {
          ArrayUtils.guardedArrayReplace(buyCalldata, sellCalldata, buyReplacementPattern);
        }
        if (sellReplacementPattern.length > 0) {
          ArrayUtils.guardedArrayReplace(sellCalldata, buyCalldata, sellReplacementPattern);
        }
        return ArrayUtils.arrayEq(buyCalldata, sellCalldata);
    }

    /**
     * @dev Call calculateMatchPrice - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function calculateMatchPrice_(
        address[14] addrs,
        uint[18] uints,
        uint8[8] feeMethodsSidesKindsHowToCalls,
        bytes calldataBuy,
        bytes calldataSell,
        bytes replacementPatternBuy,
        bytes replacementPatternSell,
        bytes staticExtradataBuy,
        bytes staticExtradataSell)
        public
        view
        returns (uint)
    {
        Order memory buy = Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], FeeMethod(feeMethodsSidesKindsHowToCalls[0]), SaleKindInterface.Side(feeMethodsSidesKindsHowToCalls[1]), SaleKindInterface.SaleKind(feeMethodsSidesKindsHowToCalls[2]), addrs[4], AuthenticatedProxy.HowToCall(feeMethodsSidesKindsHowToCalls[3]), calldataBuy, replacementPatternBuy, addrs[5], staticExtradataBuy, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]);
        Order memory sell = Order(addrs[7], addrs[8], addrs[9], uints[9], uints[10], uints[11], uints[12], addrs[10], FeeMethod(feeMethodsSidesKindsHowToCalls[4]), SaleKindInterface.Side(feeMethodsSidesKindsHowToCalls[5]), SaleKindInterface.SaleKind(feeMethodsSidesKindsHowToCalls[6]), addrs[11], AuthenticatedProxy.HowToCall(feeMethodsSidesKindsHowToCalls[7]), calldataSell, replacementPatternSell, addrs[12], staticExtradataSell, ERC20(addrs[13]), uints[13], uints[14], uints[15], uints[16], uints[17]);
        return calculateMatchPrice(
          buy,
          sell
        );
    }

    /**
     * @dev Call atomicMatch - Solidity ABI encoding limitation workaround, hopefully temporary.
     */
    function atomicMatch_(
        address[14] addrs,
        uint[18] uints,
        uint8[8] feeMethodsSidesKindsHowToCalls,
        bytes calldataBuy,
        bytes calldataSell,
        bytes replacementPatternBuy,
        bytes replacementPatternSell,
        bytes staticExtradataBuy,
        bytes staticExtradataSell,
        uint8[2] vs,
        bytes32[5] rssMetadata)
        public
        payable
    {

        return atomicMatch(
          Order(addrs[0], addrs[1], addrs[2], uints[0], uints[1], uints[2], uints[3], addrs[3], FeeMethod(feeMethodsSidesKindsHowToCalls[0]), SaleKindInterface.Side(feeMethodsSidesKindsHowToCalls[1]), SaleKindInterface.SaleKind(feeMethodsSidesKindsHowToCalls[2]), addrs[4], AuthenticatedProxy.HowToCall(feeMethodsSidesKindsHowToCalls[3]), calldataBuy, replacementPatternBuy, addrs[5], staticExtradataBuy, ERC20(addrs[6]), uints[4], uints[5], uints[6], uints[7], uints[8]),
          Sig(vs[0], rssMetadata[0], rssMetadata[1]),
          Order(addrs[7], addrs[8], addrs[9], uints[9], uints[10], uints[11], uints[12], addrs[10], FeeMethod(feeMethodsSidesKindsHowToCalls[4]), SaleKindInterface.Side(feeMethodsSidesKindsHowToCalls[5]), SaleKindInterface.SaleKind(feeMethodsSidesKindsHowToCalls[6]), addrs[11], AuthenticatedProxy.HowToCall(feeMethodsSidesKindsHowToCalls[7]), calldataSell, replacementPatternSell, addrs[12], staticExtradataSell, ERC20(addrs[13]), uints[13], uints[14], uints[15], uints[16], uints[17]),
          Sig(vs[1], rssMetadata[2], rssMetadata[3]),
          rssMetadata[4]
        );
    }

}

contract WyvernExchange is Exchange {

    string public constant name = "Project Wyvern Exchange";

    string public constant version = "2.2";

    string public constant codename = "Lambton Worm";

    /**
     * @dev Initialize a WyvernExchange instance
     * @param registryAddress Address of the registry instance which this Exchange instance will use
     * @param tokenAddress Address of the token used for protocol fees
     */
    constructor (ProxyRegistry registryAddress, TokenTransferProxy tokenTransferProxyAddress, ERC20 tokenAddress, address protocolFeeAddress) public {
        registry = registryAddress;
        tokenTransferProxy = tokenTransferProxyAddress;
        exchangeToken = tokenAddress;
        protocolFeeRecipient = protocolFeeAddress;
        owner = msg.sender;
    }

}

library SaleKindInterface {

    /**
     * Side: buy or sell.
     */
    enum Side { Buy, Sell }

    /**
     * Currently supported kinds of sale: fixed price, Dutch auction. 
     * English auctions cannot be supported without stronger escrow guarantees.
     * Future interesting options: Vickrey auction, nonlinear Dutch auctions.
     */
    enum SaleKind { FixedPrice, DutchAuction }

    /**
     * @dev Check whether the parameters of a sale are valid
     * @param saleKind Kind of sale
     * @param expirationTime Order expiration time
     * @return Whether the parameters were valid
     */
    function validateParameters(SaleKind saleKind, uint expirationTime)
        pure
        internal
        returns (bool)
    {
        /* Auctions must have a set expiration date. */
        return (saleKind == SaleKind.FixedPrice || expirationTime > 0);
    }

    /**
     * @dev Return whether or not an order can be settled
     * @dev Precondition: parameters have passed validateParameters
     * @param listingTime Order listing time
     * @param expirationTime Order expiration time
     */
    function canSettleOrder(uint listingTime, uint expirationTime)
        view
        internal
        returns (bool)
    {
        return (listingTime < now) && (expirationTime == 0 || now < expirationTime);
    }

    /**
     * @dev Calculate the settlement price of an order
     * @dev Precondition: parameters have passed validateParameters.
     * @param side Order side
     * @param saleKind Method of sale
     * @param basePrice Order base price
     * @param extra Order extra price data
     * @param listingTime Order listing time
     * @param expirationTime Order expiration time
     */
    function calculateFinalPrice(Side side, SaleKind saleKind, uint basePrice, uint extra, uint listingTime, uint expirationTime)
        view
        internal
        returns (uint finalPrice)
    {
        if (saleKind == SaleKind.FixedPrice) {
            return basePrice;
        } else if (saleKind == SaleKind.DutchAuction) {
            uint diff = SafeMath.div(SafeMath.mul(extra, SafeMath.sub(now, listingTime)), SafeMath.sub(expirationTime, listingTime));
            if (side == Side.Sell) {
                /* Sell-side - start price: basePrice. End price: basePrice - extra. */
                return SafeMath.sub(basePrice, diff);
            } else {
                /* Buy-side - start price: basePrice. End price: basePrice + extra. */
                return SafeMath.add(basePrice, diff);
            }
        }
    }

}

contract ProxyRegistry is Ownable {

    /* DelegateProxy implementation contract. Must be initialized. */
    address public delegateProxyImplementation;

    /* Authenticated proxies by user. */
    mapping(address => OwnableDelegateProxy) public proxies;

    /* Contracts pending access. */
    mapping(address => uint) public pending;

    /* Contracts allowed to call those proxies. */
    mapping(address => bool) public contracts;

    /* Delay period for adding an authenticated contract.
       This mitigates a particular class of potential attack on the Wyvern DAO (which owns this registry) - if at any point the value of assets held by proxy contracts exceeded the value of half the WYV supply (votes in the DAO),
       a malicious but rational attacker could buy half the Wyvern and grant themselves access to all the proxy contracts. A delay period renders this attack nonthreatening - given two weeks, if that happened, users would have
       plenty of time to notice and transfer their assets.
    */
    uint public DELAY_PERIOD = 2 weeks;

    /**
     * Start the process to enable access for specified contract. Subject to delay period.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function startGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] == 0);
        pending[addr] = now;
    }

    /**
     * End the process to nable access for specified contract after delay period has passed.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function endGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] != 0 && ((pending[addr] + DELAY_PERIOD) < now));
        pending[addr] = 0;
        contracts[addr] = true;
    }

    /**
     * Revoke access for specified contract. Can be done instantly.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address of which to revoke permissions
     */    
    function revokeAuthentication (address addr)
        public
        onlyOwner
    {
        contracts[addr] = false;
    }

    /**
     * Register a proxy contract with this registry
     *
     * @dev Must be called by the user which the proxy is for, creates a new AuthenticatedProxy
     * @return New AuthenticatedProxy contract
     */
    function registerProxy()
        public
        returns (OwnableDelegateProxy proxy)
    {
        require(proxies[msg.sender] == address(0));
        proxy = new OwnableDelegateProxy(msg.sender, delegateProxyImplementation, abi.encodeWithSignature("initialize(address,address)", msg.sender, address(this)));
        proxies[msg.sender] = proxy;
        return proxy;
    }

}

contract TokenTransferProxy {

    /* Authentication registry. */
    ProxyRegistry public registry;

    /**
     * Call ERC20 `transferFrom`
     *
     * @dev Authenticated contract only
     * @param token ERC20 token address
     * @param from From address
     * @param to To address
     * @param amount Transfer amount
     */
    function transferFrom(address token, address from, address to, uint amount)
        public
        returns (bool)
    {
        require(registry.contracts(msg.sender));
        return ERC20(token).transferFrom(from, to, amount);
    }

}

contract OwnedUpgradeabilityStorage {

  // Current implementation
  address internal _implementation;

  // Owner of the contract
  address private _upgradeabilityOwner;

  /**
   * @dev Tells the address of the owner
   * @return the address of the owner
   */
  function upgradeabilityOwner() public view returns (address) {
    return _upgradeabilityOwner;
  }

  /**
   * @dev Sets the address of the owner
   */
  function setUpgradeabilityOwner(address newUpgradeabilityOwner) internal {
    _upgradeabilityOwner = newUpgradeabilityOwner;
  }

  /**
  * @dev Tells the address of the current implementation
  * @return address of the current implementation
  */
  function implementation() public view returns (address) {
    return _implementation;
  }

  /**
  * @dev Tells the proxy type (EIP 897)
  * @return Proxy type, 2 for forwarding proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId) {
    return 2;
  }
}

contract AuthenticatedProxy is TokenRecipient, OwnedUpgradeabilityStorage {

    /* Whether initialized. */
    bool initialized = false;

    /* Address which owns this proxy. */
    address public user;

    /* Associated registry with contract authentication information. */
    ProxyRegistry public registry;

    /* Whether access has been revoked. */
    bool public revoked;

    /* Delegate call could be used to atomically transfer multiple assets owned by the proxy contract with one order. */
    enum HowToCall { Call, DelegateCall }

    /* Event fired when the proxy access is revoked or unrevoked. */
    event Revoked(bool revoked);

    /**
     * Initialize an AuthenticatedProxy
     *
     * @param addrUser Address of user on whose behalf this proxy will act
     * @param addrRegistry Address of ProxyRegistry contract which will manage this proxy
     */
    function initialize (address addrUser, ProxyRegistry addrRegistry)
        public
    {
        require(!initialized);
        initialized = true;
        user = addrUser;
        registry = addrRegistry;
    }

    /**
     * Set the revoked flag (allows a user to revoke ProxyRegistry access)
     *
     * @dev Can be called by the user only
     * @param revoke Whether or not to revoke access
     */
    function setRevoke(bool revoke)
        public
    {
        require(msg.sender == user);
        revoked = revoke;
        emit Revoked(revoke);
    }

    /**
     * Execute a message call from the proxy contract
     *
     * @dev Can be called by the user, or by a contract authorized by the registry as long as the user has not revoked access
     * @param dest Address to which the call will be sent
     * @param howToCall Which kind of call to make
     * @param calldata Calldata to send
     * @return Result of the call (success or failure)
     */
    function proxy(address dest, HowToCall howToCall, bytes calldata)
        public
        returns (bool result)
    {
        require(msg.sender == user || (!revoked && registry.contracts(msg.sender)));
        if (howToCall == HowToCall.Call) {
            result = dest.call(calldata);
        } else if (howToCall == HowToCall.DelegateCall) {
            result = dest.delegatecall(calldata);
        }
        return result;
    }

    /**
     * Execute a message call and assert success
     * 
     * @dev Same functionality as `proxy`, just asserts the return value
     * @param dest Address to which the call will be sent
     * @param howToCall What kind of call to make
     * @param calldata Calldata to send
     */
    function proxyAssert(address dest, HowToCall howToCall, bytes calldata)
        public
    {
        require(proxy(dest, howToCall, calldata));
    }

}

contract Proxy {

  /**
  * @dev Tells the address of the implementation where every call will be delegated.
  * @return address of the implementation to which it will be delegated
  */
  function implementation() public view returns (address);

  /**
  * @dev Tells the type of proxy (EIP 897)
  * @return Type of proxy, 2 for upgradeable proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId);

  /**
  * @dev Fallback function allowing to perform a delegatecall to the given implementation.
  * This function will return whatever the implementation call returns
  */
  function () payable public {
    address _impl = implementation();
    require(_impl != address(0));

    assembly {
      let ptr := mload(0x40)
      calldatacopy(ptr, 0, calldatasize)
      let result := delegatecall(gas, _impl, ptr, calldatasize, 0, 0)
      let size := returndatasize
      returndatacopy(ptr, 0, size)

      switch result
      case 0 { revert(ptr, size) }
      default { return(ptr, size) }
    }
  }
}

contract OwnedUpgradeabilityProxy is Proxy, OwnedUpgradeabilityStorage {
  /**
  * @dev Event to show ownership has been transferred
  * @param previousOwner representing the address of the previous owner
  * @param newOwner representing the address of the new owner
  */
  event ProxyOwnershipTransferred(address previousOwner, address newOwner);

  /**
  * @dev This event will be emitted every time the implementation gets upgraded
  * @param implementation representing the address of the upgraded implementation
  */
  event Upgraded(address indexed implementation);

  /**
  * @dev Upgrades the implementation address
  * @param implementation representing the address of the new implementation to be set
  */
  function _upgradeTo(address implementation) internal {
    require(_implementation != implementation);
    _implementation = implementation;
    emit Upgraded(implementation);
  }

  /**
  * @dev Throws if called by any account other than the owner.
  */
  modifier onlyProxyOwner() {
    require(msg.sender == proxyOwner());
    _;
  }

  /**
   * @dev Tells the address of the proxy owner
   * @return the address of the proxy owner
   */
  function proxyOwner() public view returns (address) {
    return upgradeabilityOwner();
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferProxyOwnership(address newOwner) public onlyProxyOwner {
    require(newOwner != address(0));
    emit ProxyOwnershipTransferred(proxyOwner(), newOwner);
    setUpgradeabilityOwner(newOwner);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy.
   * @param implementation representing the address of the new implementation to be set.
   */
  function upgradeTo(address implementation) public onlyProxyOwner {
    _upgradeTo(implementation);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy
   * and delegatecall the new implementation for initialization.
   * @param implementation representing the address of the new implementation to be set.
   * @param data represents the msg.data to bet sent in the low level call. This parameter may include the function
   * signature of the implementation to be called with the needed payload
   */
  function upgradeToAndCall(address implementation, bytes data) payable public onlyProxyOwner {
    upgradeTo(implementation);
    require(address(this).delegatecall(data));
  }
}

contract OwnableDelegateProxy is OwnedUpgradeabilityProxy {

    constructor(address owner, address initialImplementation, bytes calldata)
        public
    {
        setUpgradeabilityOwner(owner);
        _upgradeTo(initialImplementation);
        require(initialImplementation.delegatecall(calldata));
    }

}

/***
 *    ██████╗ ███████╗ ██████╗  ██████╗ 
 *    ██╔══██╗██╔════╝██╔════╝ ██╔═══██╗
 *    ██║  ██║█████╗  ██║  ███╗██║   ██║
 *    ██║  ██║██╔══╝  ██║   ██║██║   ██║
 *    ██████╔╝███████╗╚██████╔╝╚██████╔╝
 *    ╚═════╝ ╚══════╝ ╚═════╝  ╚═════╝ 
 *    
 * https://dego.finance
                                  
* MIT License
* ===========
*
* Copyright (c) 2020 dego
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
// File: @openzeppelin/contracts/GSN/Context.sol

pragma solidity ^0.5.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }
    // solhint-disable-previous-line no-empty-blocks

    function _msgSender() internal view returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/introspection/IERC165.sol

pragma solidity ^0.5.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/token/ERC721/IERC721.sol

pragma solidity ^0.5.0;


/**
 * @dev Required interface of an ERC721 compliant contract.
 */
contract IERC721 is IERC165 {
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of NFTs in `owner`'s account.
     */
    function balanceOf(address owner) public view returns (uint256 balance);

    /**
     * @dev Returns the owner of the NFT specified by `tokenId`.
     */
    function ownerOf(uint256 tokenId) public view returns (address owner);

    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     *
     *
     * Requirements:
     * - `from`, `to` cannot be zero.
     * - `tokenId` must be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this
     * NFT by either {approve} or {setApprovalForAll}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public;
    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     * Requirements:
     * - If the caller is not `from`, it must be approved to move this NFT by
     * either {approve} or {setApprovalForAll}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public;
    function approve(address to, uint256 tokenId) public;
    function getApproved(uint256 tokenId) public view returns (address operator);

    function setApprovalForAll(address operator, bool _approved) public;
    function isApprovedForAll(address owner, address operator) public view returns (bool);


    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public;
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol

pragma solidity ^0.5.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
contract IERC721Receiver {
    /**
     * @notice Handle the receipt of an NFT
     * @dev The ERC721 smart contract calls this function on the recipient
     * after a {IERC721-safeTransferFrom}. This function MUST return the function selector,
     * otherwise the caller will revert the transaction. The selector to be
     * returned can be obtained as `this.onERC721Received.selector`. This
     * function MAY throw to revert and reject the transfer.
     * Note: the ERC721 contract address is always the message sender.
     * @param operator The address which called `safeTransferFrom` function
     * @param from The address which previously owned the token
     * @param tokenId The NFT identifier which is being transferred
     * @param data Additional data with no specified format
     * @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
    public returns (bytes4);
}

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     *
     * _Available since v2.4.0._
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.5.5;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following 
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Converts an `address` into `address payable`. Note that this is
     * simply a type cast: the actual underlying value is not changed.
     *
     * _Available since v2.4.0._
     */
    function toPayable(address account) internal pure returns (address payable) {
        return address(uint160(account));
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     *
     * _Available since v2.4.0._
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-call-value
        (bool success, ) = recipient.call.value(amount)("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

// File: @openzeppelin/contracts/drafts/Counters.sol

pragma solidity ^0.5.0;


/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 * Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
 * overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
 * directly accessed.
 */
library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        // The {SafeMath} overflow check can be skipped here, see the comment at the top
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}

// File: @openzeppelin/contracts/introspection/ERC165.sol

pragma solidity ^0.5.0;


/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts may inherit from this and call {_registerInterface} to declare
 * their support of an interface.
 */
contract ERC165 is IERC165 {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Mapping of interface ids to whether or not it's supported.
     */
    mapping(bytes4 => bool) private _supportedInterfaces;

    constructor () internal {
        // Derived contracts need only register support for their own interfaces,
        // we register support for ERC165 itself here
        _registerInterface(_INTERFACE_ID_ERC165);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     *
     * Time complexity O(1), guaranteed to always use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Registers the contract as an implementer of the interface defined by
     * `interfaceId`. Support of the actual ERC165 interface is automatic and
     * registering its interface id is not required.
     *
     * See {IERC165-supportsInterface}.
     *
     * Requirements:
     *
     * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
     */
    function _registerInterface(bytes4 interfaceId) internal {
        require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}

// File: @openzeppelin/contracts/token/ERC721/ERC721.sol

pragma solidity ^0.5.0;








/**
 * @title ERC721 Non-Fungible Token Standard basic implementation
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721 is Context, ERC165, IERC721 {
    using SafeMath for uint256;
    using Address for address;
    using Counters for Counters.Counter;

    // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
    bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;

    // Mapping from token ID to owner
    mapping (uint256 => address) private _tokenOwner;

    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;

    // Mapping from owner to number of owned token
    mapping (address => Counters.Counter) private _ownedTokensCount;

    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;

    /*
     *     bytes4(keccak256('balanceOf(address)')) == 0x70a08231
     *     bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
     *     bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
     *     bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
     *     bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
     *     bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
     *     bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
     *
     *     => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
     *        0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
     */
    bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;

    constructor () public {
        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721);
    }

    /**
     * @dev Gets the balance of the specified address.
     * @param owner address to query the balance of
     * @return uint256 representing the amount owned by the passed address
     */
    function balanceOf(address owner) public view returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");

        return _ownedTokensCount[owner].current();
    }

    /**
     * @dev Gets the owner of the specified token ID.
     * @param tokenId uint256 ID of the token to query the owner of
     * @return address currently marked as the owner of the given token ID
     */
    function ownerOf(uint256 tokenId) public view returns (address) {
        address owner = _tokenOwner[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");

        return owner;
    }

    /**
     * @dev Approves another address to transfer the given token ID
     * The zero address indicates there is no approved address.
     * There can only be one approved address per token at a given time.
     * Can only be called by the token owner or an approved operator.
     * @param to address to be approved for the given token ID
     * @param tokenId uint256 ID of the token to be approved
     */
    function approve(address to, uint256 tokenId) public {
        address owner = ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Gets the approved address for a token ID, or zero if no address set
     * Reverts if the token ID does not exist.
     * @param tokenId uint256 ID of the token to query the approval of
     * @return address currently approved for the given token ID
     */
    function getApproved(uint256 tokenId) public view returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Sets or unsets the approval of a given operator
     * An operator is allowed to transfer all tokens of the sender on their behalf.
     * @param to operator address to set the approval
     * @param approved representing the status of the approval to be set
     */
    function setApprovalForAll(address to, bool approved) public {
        require(to != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][to] = approved;
        emit ApprovalForAll(_msgSender(), to, approved);
    }

    /**
     * @dev Tells whether an operator is approved by a given owner.
     * @param owner owner address which you want to query the approval of
     * @param operator operator address which you want to query the approval of
     * @return bool whether the given operator is approved by the given owner
     */
    function isApprovedForAll(address owner, address operator) public view returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Transfers the ownership of a given token ID to another address.
     * Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     * Requires the msg.sender to be the owner, approved, or operator.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function transferFrom(address from, address to, uint256 tokenId) public {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transferFrom(from, to, tokenId);
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the msg.sender to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the _msgSender() to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes data to send along with a safe transfer check
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransferFrom(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the msg.sender to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes data to send along with a safe transfer check
     */
    function _safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) internal {
        _transferFrom(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether the specified token exists.
     * @param tokenId uint256 ID of the token to query the existence of
     * @return bool whether the token exists
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        address owner = _tokenOwner[tokenId];
        return owner != address(0);
    }

    /**
     * @dev Returns whether the given spender can transfer a given token ID.
     * @param spender address of the spender to query
     * @param tokenId uint256 ID of the token to be transferred
     * @return bool whether the msg.sender is approved for the given token ID,
     * is an operator of the owner, or is the owner of the token
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Internal function to safely mint a new token.
     * Reverts if the given token ID already exists.
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Internal function to safely mint a new token.
     * Reverts if the given token ID already exists.
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     * @param _data bytes data to send along with a safe transfer check
     */
    function _safeMint(address to, uint256 tokenId, bytes memory _data) internal {
        _mint(to, tokenId);
        require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Internal function to mint a new token.
     * Reverts if the given token ID already exists.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _mint(address to, uint256 tokenId) internal {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _tokenOwner[tokenId] = to;
        _ownedTokensCount[to].increment();

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use {_burn} instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(address owner, uint256 tokenId) internal {
        require(ownerOf(tokenId) == owner, "ERC721: burn of token that is not own");

        _clearApproval(tokenId);

        _ownedTokensCount[owner].decrement();
        _tokenOwner[tokenId] = address(0);

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(uint256 tokenId) internal {
        _burn(ownerOf(tokenId), tokenId);
    }

    /**
     * @dev Internal function to transfer ownership of a given token ID to another address.
     * As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _transferFrom(address from, address to, uint256 tokenId) internal {
        require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _clearApproval(tokenId);

        _ownedTokensCount[from].decrement();
        _ownedTokensCount[to].increment();

        _tokenOwner[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * This is an internal detail of the `ERC721` contract and its use is deprecated.
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        internal returns (bool)
    {
        if (!to.isContract()) {
            return true;
        }
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = to.call(abi.encodeWithSelector(
            IERC721Receiver(to).onERC721Received.selector,
            _msgSender(),
            from,
            tokenId,
            _data
        ));
        if (!success) {
            if (returndata.length > 0) {
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert("ERC721: transfer to non ERC721Receiver implementer");
            }
        } else {
            bytes4 retval = abi.decode(returndata, (bytes4));
            return (retval == _ERC721_RECEIVED);
        }
    }

    /**
     * @dev Private function to clear current approval of a given token ID.
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _clearApproval(uint256 tokenId) private {
        if (_tokenApprovals[tokenId] != address(0)) {
            _tokenApprovals[tokenId] = address(0);
        }
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol

pragma solidity ^0.5.0;


/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
contract IERC721Enumerable is IERC721 {
    function totalSupply() public view returns (uint256);
    function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256 tokenId);

    function tokenByIndex(uint256 index) public view returns (uint256);
}

// File: @openzeppelin/contracts/token/ERC721/ERC721Enumerable.sol

pragma solidity ^0.5.0;





/**
 * @title ERC-721 Non-Fungible Token with optional enumeration extension logic
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721Enumerable is Context, ERC165, ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => uint256[]) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /*
     *     bytes4(keccak256('totalSupply()')) == 0x18160ddd
     *     bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
     *     bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
     *
     *     => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
     */
    bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;

    /**
     * @dev Constructor function.
     */
    constructor () public {
        // register the supported interface to conform to ERC721Enumerable via ERC165
        _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
    }

    /**
     * @dev Gets the token ID at a given index of the tokens list of the requested owner.
     * @param owner address owning the tokens list to be accessed
     * @param index uint256 representing the index to be accessed of the requested tokens list
     * @return uint256 token ID at the given index of the tokens list owned by the requested address
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256) {
        require(index < balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev Gets the total amount of tokens stored by the contract.
     * @return uint256 representing the total amount of tokens
     */
    function totalSupply() public view returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev Gets the token ID at a given index of all the tokens in this contract
     * Reverts if the index is greater or equal to the total number of tokens.
     * @param index uint256 representing the index to be accessed of the tokens list
     * @return uint256 token ID at the given index of the tokens list
     */
    function tokenByIndex(uint256 index) public view returns (uint256) {
        require(index < totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Internal function to transfer ownership of a given token ID to another address.
     * As opposed to transferFrom, this imposes no restrictions on msg.sender.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _transferFrom(address from, address to, uint256 tokenId) internal {
        super._transferFrom(from, to, tokenId);

        _removeTokenFromOwnerEnumeration(from, tokenId);

        _addTokenToOwnerEnumeration(to, tokenId);
    }

    /**
     * @dev Internal function to mint a new token.
     * Reverts if the given token ID already exists.
     * @param to address the beneficiary that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _mint(address to, uint256 tokenId) internal {
        super._mint(to, tokenId);

        _addTokenToOwnerEnumeration(to, tokenId);

        _addTokenToAllTokensEnumeration(tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use {ERC721-_burn} instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(address owner, uint256 tokenId) internal {
        super._burn(owner, tokenId);

        _removeTokenFromOwnerEnumeration(owner, tokenId);
        // Since tokenId will be deleted, we can clear its slot in _ownedTokensIndex to trigger a gas refund
        _ownedTokensIndex[tokenId] = 0;

        _removeTokenFromAllTokensEnumeration(tokenId);
    }

    /**
     * @dev Gets the list of token IDs of the requested owner.
     * @param owner address owning the tokens
     * @return uint256[] List of token IDs owned by the requested address
     */
    function _tokensOfOwner(address owner) internal view returns (uint256[] storage) {
        return _ownedTokens[owner];
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        _ownedTokensIndex[tokenId] = _ownedTokens[to].length;
        _ownedTokens[to].push(tokenId);
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _ownedTokens[from].length.sub(1);
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        _ownedTokens[from].length--;

        // Note that _ownedTokensIndex[tokenId] hasn't been cleared: it still points to the old slot (now occupied by
        // lastTokenId, or just over the end of the array if the token was the last one).
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length.sub(1);
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        _allTokens.length--;
        _allTokensIndex[tokenId] = 0;
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Metadata.sol

pragma solidity ^0.5.0;


/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
contract IERC721Metadata is IERC721 {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// File: @openzeppelin/contracts/token/ERC721/ERC721Metadata.sol

pragma solidity ^0.5.0;





contract ERC721Metadata is Context, ERC165, ERC721, IERC721Metadata {
    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Base URI
    string private _baseURI;

    // Optional mapping for token URIs
    mapping(uint256 => string) private _tokenURIs;

    /*
     *     bytes4(keccak256('name()')) == 0x06fdde03
     *     bytes4(keccak256('symbol()')) == 0x95d89b41
     *     bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
     *
     *     => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
     */
    bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;

    /**
     * @dev Constructor function
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;

        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721_METADATA);
    }

    /**
     * @dev Gets the token name.
     * @return string representing the token name
     */
    function name() external view returns (string memory) {
        return _name;
    }

    /**
     * @dev Gets the token symbol.
     * @return string representing the token symbol
     */
    function symbol() external view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the URI for a given token ID. May return an empty string.
     *
     * If the token's URI is non-empty and a base URI was set (via
     * {_setBaseURI}), it will be added to the token ID's URI as a prefix.
     *
     * Reverts if the token ID does not exist.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory _tokenURI = _tokenURIs[tokenId];

        // Even if there is a base URI, it is only appended to non-empty token-specific URIs
        if (bytes(_tokenURI).length == 0) {
            return "";
        } else {
            // abi.encodePacked is being used to concatenate strings
            return string(abi.encodePacked(_baseURI, _tokenURI));
        }
    }

    /**
     * @dev Internal function to set the token URI for a given token.
     *
     * Reverts if the token ID does not exist.
     *
     * TIP: if all token IDs share a prefix (e.g. if your URIs look like
     * `http://api.myproject.com/token/<id>`), use {_setBaseURI} to store
     * it and save gas.
     */
    function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal {
        require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
        _tokenURIs[tokenId] = _tokenURI;
    }

    /**
     * @dev Internal function to set the base URI for all token IDs. It is
     * automatically added as a prefix to the value returned in {tokenURI}.
     *
     * _Available since v2.5.0._
     */
    function _setBaseURI(string memory baseURI) internal {
        _baseURI = baseURI;
    }

    /**
    * @dev Returns the base URI set via {_setBaseURI}. This will be
    * automatically added as a preffix in {tokenURI} to each token's URI, when
    * they are non-empty.
    *
    * _Available since v2.5.0._
    */
    function baseURI() external view returns (string memory) {
        return _baseURI;
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use _burn(uint256) instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned by the msg.sender
     */
    function _burn(address owner, uint256 tokenId) internal {
        super._burn(owner, tokenId);

        // Clear metadata (if any)
        if (bytes(_tokenURIs[tokenId]).length != 0) {
            delete _tokenURIs[tokenId];
        }
    }
}

// File: @openzeppelin/contracts/token/ERC721/ERC721Full.sol

pragma solidity ^0.5.0;




/**
 * @title Full ERC721 Token
 * @dev This implementation includes all the required and some optional functionality of the ERC721 standard
 * Moreover, it includes approve all functionality using operator terminology.
 *
 * See https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721Full is ERC721, ERC721Enumerable, ERC721Metadata {
    constructor (string memory name, string memory symbol) public ERC721Metadata(name, symbol) {
        // solhint-disable-previous-line no-empty-blocks
    }
}

// File: contracts/library/Governance.sol

pragma solidity ^0.5.0;

contract Governance {

    address public _governance;

    constructor() public {
        _governance = tx.origin;
    }

    event GovernanceTransferred(address indexed previousOwner, address indexed newOwner);

    modifier onlyGovernance {
        require(msg.sender == _governance, "not governance");
        _;
    }

    function setGovernance(address governance)  public  onlyGovernance
    {
        require(governance != address(0), "new governance the zero address");
        emit GovernanceTransferred(_governance, governance);
        _governance = governance;
    }


}

// File: contracts/library/DegoUtil.sol

pragma solidity ^0.5.0;


library DegoUtil {
    function uintToString(uint _i) internal pure returns (string memory _uintAsString) {
        if (_i == 0) {
            return "0";
        }
        uint j = _i;
        uint len;
        while (j != 0) {
            len++;
            j /= 10;
        }
        bytes memory bstr = new bytes(len);
        uint k = len - 1;
        while (_i != 0) {
            bstr[k--] = byte(uint8(48 + _i % 10));
            _i /= 10;
        }
        return string(bstr);
    }
}

// File: contracts/nft/GegoToken.sol

pragma solidity ^0.5.5;




contract GegoToken is ERC721Full, Governance {
    // for minters
    mapping(address => bool) public _minters;



    constructor() public ERC721Full("gego.dego", "GEGO") {
        _setBaseURI("https://api.dego.finance/gego-token/");
    }


    function setURIPrefix(string memory baseURI) internal {
        _setBaseURI(baseURI);
    }


    /**
     * @dev Function to mint tokens.
     * @param to The address that will receive the minted token.
     * @param tokenId The token id to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address to, uint256 tokenId) external returns (bool) {
        require(_minters[msg.sender], "!minter");
        _mint(to, tokenId);
        _setTokenURI(tokenId, DegoUtil.uintToString(tokenId));
        return true;
    }

    /**
     * @dev Function to safely mint tokens.
     * @param to The address that will receive the minted token.
     * @param tokenId The token id to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function safeMint(address to, uint256 tokenId) public returns (bool) {
        require(_minters[msg.sender], "!minter");
        _safeMint(to, tokenId);
        _setTokenURI(tokenId, DegoUtil.uintToString(tokenId));
        return true;
    }

    /**
     * @dev Function to safely mint tokens.
     * @param to The address that will receive the minted token.
     * @param tokenId The token id to mint.
     * @param _data bytes data to send along with a safe transfer check.
     * @return A boolean that indicates if the operation was successful.
     */
    function safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public returns (bool) {
        _safeMint(to, tokenId, _data);
        _setTokenURI(tokenId, DegoUtil.uintToString(tokenId));
        return true;
    }

    function addMinter(address minter) public onlyGovernance {
        _minters[minter] = true;
    }

    function removeMinter(address minter) public onlyGovernance {
        _minters[minter] = false;
    }

    /**
     * @dev Burns a specific ERC721 token.
     * @param tokenId uint256 id of the ERC721 token to be burned.
     */
    function burn(uint256 tokenId) external {
        //solhint-disable-next-line max-line-length
        require(_minters[msg.sender], "!minter");
        require(
            _isApprovedOrOwner(_msgSender(), tokenId),
            "caller is not owner nor approved"
        );
        _burn(tokenId);
    }


    /**
     * @dev Gets the list of token IDs of the requested owner.
     * @param owner address owning the tokens
     * @return uint256[] List of token IDs owned by the requested address
     */
    function tokensOfOwner(address owner) public view returns (uint256[] memory) {
        return _tokensOfOwner(owner);
    }


}

pragma solidity ^0.4.13;

contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    require(newOwner != address(0));
    emit OwnershipTransferred(owner, newOwner);
    owner = newOwner;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }
}

contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender)
    public view returns (uint256);

  function transferFrom(address from, address to, uint256 value)
    public returns (bool);

  function approve(address spender, uint256 value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

contract TokenRecipient {
    event ReceivedEther(address indexed sender, uint amount);
    event ReceivedTokens(address indexed from, uint256 value, address indexed token, bytes extraData);

    /**
     * @dev Receive tokens and generate a log event
     * @param from Address from which to transfer tokens
     * @param value Amount of tokens to transfer
     * @param token Address of token
     * @param extraData Additional data to log
     */
    function receiveApproval(address from, uint256 value, address token, bytes extraData) public {
        ERC20 t = ERC20(token);
        require(t.transferFrom(from, this, value));
        emit ReceivedTokens(from, value, token, extraData);
    }

    /**
     * @dev Receive Ether and generate a log event
     */
    function () payable public {
        emit ReceivedEther(msg.sender, msg.value);
    }
}

contract ProxyRegistry is Ownable {

    /* DelegateProxy implementation contract. Must be initialized. */
    address public delegateProxyImplementation;

    /* Authenticated proxies by user. */
    mapping(address => OwnableDelegateProxy) public proxies;

    /* Contracts pending access. */
    mapping(address => uint) public pending;

    /* Contracts allowed to call those proxies. */
    mapping(address => bool) public contracts;

    /* Delay period for adding an authenticated contract.
       This mitigates a particular class of potential attack on the Wyvern DAO (which owns this registry) - if at any point the value of assets held by proxy contracts exceeded the value of half the WYV supply (votes in the DAO),
       a malicious but rational attacker could buy half the Wyvern and grant themselves access to all the proxy contracts. A delay period renders this attack nonthreatening - given two weeks, if that happened, users would have
       plenty of time to notice and transfer their assets.
    */
    uint public DELAY_PERIOD = 2 weeks;

    /**
     * Start the process to enable access for specified contract. Subject to delay period.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function startGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] == 0);
        pending[addr] = now;
    }

    /**
     * End the process to nable access for specified contract after delay period has passed.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function endGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] != 0 && ((pending[addr] + DELAY_PERIOD) < now));
        pending[addr] = 0;
        contracts[addr] = true;
    }

    /**
     * Revoke access for specified contract. Can be done instantly.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address of which to revoke permissions
     */    
    function revokeAuthentication (address addr)
        public
        onlyOwner
    {
        contracts[addr] = false;
    }

    /**
     * Register a proxy contract with this registry
     *
     * @dev Must be called by the user which the proxy is for, creates a new AuthenticatedProxy
     * @return New AuthenticatedProxy contract
     */
    function registerProxy()
        public
        returns (OwnableDelegateProxy proxy)
    {
        require(proxies[msg.sender] == address(0));
        proxy = new OwnableDelegateProxy(msg.sender, delegateProxyImplementation, abi.encodeWithSignature("initialize(address,address)", msg.sender, address(this)));
        proxies[msg.sender] = proxy;
        return proxy;
    }

}

contract WyvernProxyRegistry is ProxyRegistry {

    string public constant name = "Project Wyvern Proxy Registry";

    /* Whether the initial auth address has been set. */
    bool public initialAddressSet = false;

    constructor ()
        public
    {
        delegateProxyImplementation = new AuthenticatedProxy();
    }

    /** 
     * Grant authentication to the initial Exchange protocol contract
     *
     * @dev No delay, can only be called once - after that the standard registry process with a delay must be used
     * @param authAddress Address of the contract to grant authentication
     */
    function grantInitialAuthentication (address authAddress)
        onlyOwner
        public
    {
        require(!initialAddressSet);
        initialAddressSet = true;
        contracts[authAddress] = true;
    }

}

contract OwnedUpgradeabilityStorage {

  // Current implementation
  address internal _implementation;

  // Owner of the contract
  address private _upgradeabilityOwner;

  /**
   * @dev Tells the address of the owner
   * @return the address of the owner
   */
  function upgradeabilityOwner() public view returns (address) {
    return _upgradeabilityOwner;
  }

  /**
   * @dev Sets the address of the owner
   */
  function setUpgradeabilityOwner(address newUpgradeabilityOwner) internal {
    _upgradeabilityOwner = newUpgradeabilityOwner;
  }

  /**
  * @dev Tells the address of the current implementation
  * @return address of the current implementation
  */
  function implementation() public view returns (address) {
    return _implementation;
  }

  /**
  * @dev Tells the proxy type (EIP 897)
  * @return Proxy type, 2 for forwarding proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId) {
    return 2;
  }
}

contract AuthenticatedProxy is TokenRecipient, OwnedUpgradeabilityStorage {

    /* Whether initialized. */
    bool initialized = false;

    /* Address which owns this proxy. */
    address public user;

    /* Associated registry with contract authentication information. */
    ProxyRegistry public registry;

    /* Whether access has been revoked. */
    bool public revoked;

    /* Delegate call could be used to atomically transfer multiple assets owned by the proxy contract with one order. */
    enum HowToCall { Call, DelegateCall }

    /* Event fired when the proxy access is revoked or unrevoked. */
    event Revoked(bool revoked);

    /**
     * Initialize an AuthenticatedProxy
     *
     * @param addrUser Address of user on whose behalf this proxy will act
     * @param addrRegistry Address of ProxyRegistry contract which will manage this proxy
     */
    function initialize (address addrUser, ProxyRegistry addrRegistry)
        public
    {
        require(!initialized);
        initialized = true;
        user = addrUser;
        registry = addrRegistry;
    }

    /**
     * Set the revoked flag (allows a user to revoke ProxyRegistry access)
     *
     * @dev Can be called by the user only
     * @param revoke Whether or not to revoke access
     */
    function setRevoke(bool revoke)
        public
    {
        require(msg.sender == user);
        revoked = revoke;
        emit Revoked(revoke);
    }

    /**
     * Execute a message call from the proxy contract
     *
     * @dev Can be called by the user, or by a contract authorized by the registry as long as the user has not revoked access
     * @param dest Address to which the call will be sent
     * @param howToCall Which kind of call to make
     * @param calldata Calldata to send
     * @return Result of the call (success or failure)
     */
    function proxy(address dest, HowToCall howToCall, bytes calldata)
        public
        returns (bool result)
    {
        require(msg.sender == user || (!revoked && registry.contracts(msg.sender)));
        if (howToCall == HowToCall.Call) {
            result = dest.call(calldata);
        } else if (howToCall == HowToCall.DelegateCall) {
            result = dest.delegatecall(calldata);
        }
        return result;
    }

    /**
     * Execute a message call and assert success
     * 
     * @dev Same functionality as `proxy`, just asserts the return value
     * @param dest Address to which the call will be sent
     * @param howToCall What kind of call to make
     * @param calldata Calldata to send
     */
    function proxyAssert(address dest, HowToCall howToCall, bytes calldata)
        public
    {
        require(proxy(dest, howToCall, calldata));
    }

}

contract Proxy {

  /**
  * @dev Tells the address of the implementation where every call will be delegated.
  * @return address of the implementation to which it will be delegated
  */
  function implementation() public view returns (address);

  /**
  * @dev Tells the type of proxy (EIP 897)
  * @return Type of proxy, 2 for upgradeable proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId);

  /**
  * @dev Fallback function allowing to perform a delegatecall to the given implementation.
  * This function will return whatever the implementation call returns
  */
  function () payable public {
    address _impl = implementation();
    require(_impl != address(0));

    assembly {
      let ptr := mload(0x40)
      calldatacopy(ptr, 0, calldatasize)
      let result := delegatecall(gas, _impl, ptr, calldatasize, 0, 0)
      let size := returndatasize
      returndatacopy(ptr, 0, size)

      switch result
      case 0 { revert(ptr, size) }
      default { return(ptr, size) }
    }
  }
}

contract OwnedUpgradeabilityProxy is Proxy, OwnedUpgradeabilityStorage {
  /**
  * @dev Event to show ownership has been transferred
  * @param previousOwner representing the address of the previous owner
  * @param newOwner representing the address of the new owner
  */
  event ProxyOwnershipTransferred(address previousOwner, address newOwner);

  /**
  * @dev This event will be emitted every time the implementation gets upgraded
  * @param implementation representing the address of the upgraded implementation
  */
  event Upgraded(address indexed implementation);

  /**
  * @dev Upgrades the implementation address
  * @param implementation representing the address of the new implementation to be set
  */
  function _upgradeTo(address implementation) internal {
    require(_implementation != implementation);
    _implementation = implementation;
    emit Upgraded(implementation);
  }

  /**
  * @dev Throws if called by any account other than the owner.
  */
  modifier onlyProxyOwner() {
    require(msg.sender == proxyOwner());
    _;
  }

  /**
   * @dev Tells the address of the proxy owner
   * @return the address of the proxy owner
   */
  function proxyOwner() public view returns (address) {
    return upgradeabilityOwner();
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferProxyOwnership(address newOwner) public onlyProxyOwner {
    require(newOwner != address(0));
    emit ProxyOwnershipTransferred(proxyOwner(), newOwner);
    setUpgradeabilityOwner(newOwner);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy.
   * @param implementation representing the address of the new implementation to be set.
   */
  function upgradeTo(address implementation) public onlyProxyOwner {
    _upgradeTo(implementation);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy
   * and delegatecall the new implementation for initialization.
   * @param implementation representing the address of the new implementation to be set.
   * @param data represents the msg.data to bet sent in the low level call. This parameter may include the function
   * signature of the implementation to be called with the needed payload
   */
  function upgradeToAndCall(address implementation, bytes data) payable public onlyProxyOwner {
    upgradeTo(implementation);
    require(address(this).delegatecall(data));
  }
}

contract OwnableDelegateProxy is OwnedUpgradeabilityProxy {

    constructor(address owner, address initialImplementation, bytes calldata)
        public
    {
        setUpgradeabilityOwner(owner);
        _upgradeTo(initialImplementation);
        require(initialImplementation.delegatecall(calldata));
    }

}

contract OwnedUpgradeabilityStorage {

  // Current implementation
  address internal _implementation;

  // Owner of the contract
  address private _upgradeabilityOwner;

  /**
   * @dev Tells the address of the owner
   * @return the address of the owner
   */
  function upgradeabilityOwner() public view returns (address) {
    return _upgradeabilityOwner;
  }

  /**
   * @dev Sets the address of the owner
   */
  function setUpgradeabilityOwner(address newUpgradeabilityOwner) internal {
    _upgradeabilityOwner = newUpgradeabilityOwner;
  }

  /**
  * @dev Tells the address of the current implementation
  * @return address of the current implementation
  */
  function implementation() public view returns (address) {
    return _implementation;
  }

  /**
  * @dev Tells the proxy type (EIP 897)
  * @return Proxy type, 2 for forwarding proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId) {
    return 2;
  }
}



contract Proxy {

  /**
  * @dev Tells the address of the implementation where every call will be delegated.
  * @return address of the implementation to which it will be delegated
  */
  function implementation() public view returns (address);

  /**
  * @dev Tells the type of proxy (EIP 897)
  * @return Type of proxy, 2 for upgradeable proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId);

  /**
  * @dev Fallback function allowing to perform a delegatecall to the given implementation.
  * This function will return whatever the implementation call returns
  */
  function () payable public {
    address _impl = implementation();
    require(_impl != address(0));

    assembly {
      let ptr := mload(0x40)
      calldatacopy(ptr, 0, calldatasize)
      let result := delegatecall(gas, _impl, ptr, calldatasize, 0, 0)
      let size := returndatasize
      returndatacopy(ptr, 0, size)

      switch result
      case 0 { revert(ptr, size) }
      default { return(ptr, size) }
    }
  }
}

contract OwnedUpgradeabilityProxy is Proxy, OwnedUpgradeabilityStorage {
  /**
  * @dev Event to show ownership has been transferred
  * @param previousOwner representing the address of the previous owner
  * @param newOwner representing the address of the new owner
  */
  event ProxyOwnershipTransferred(address previousOwner, address newOwner);

  /**
  * @dev This event will be emitted every time the implementation gets upgraded
  * @param implementation representing the address of the upgraded implementation
  */
  event Upgraded(address indexed implementation);

  /**
  * @dev Upgrades the implementation address
  * @param implementation representing the address of the new implementation to be set
  */
  function _upgradeTo(address implementation) internal {
    require(_implementation != implementation);
    _implementation = implementation;
    emit Upgraded(implementation);
  }

  /**
  * @dev Throws if called by any account other than the owner.
  */
  modifier onlyProxyOwner() {
    require(msg.sender == proxyOwner());
    _;
  }

  /**
   * @dev Tells the address of the proxy owner
   * @return the address of the proxy owner
   */
  function proxyOwner() public view returns (address) {
    return upgradeabilityOwner();
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferProxyOwnership(address newOwner) public onlyProxyOwner {
    require(newOwner != address(0));
    emit ProxyOwnershipTransferred(proxyOwner(), newOwner);
    setUpgradeabilityOwner(newOwner);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy.
   * @param implementation representing the address of the new implementation to be set.
   */
  function upgradeTo(address implementation) public onlyProxyOwner {
    _upgradeTo(implementation);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy
   * and delegatecall the new implementation for initialization.
   * @param implementation representing the address of the new implementation to be set.
   * @param data represents the msg.data to bet sent in the low level call. This parameter may include the function
   * signature of the implementation to be called with the needed payload
   */
  function upgradeToAndCall(address implementation, bytes data) payable public onlyProxyOwner {
    upgradeTo(implementation);
    require(address(this).delegatecall(data));
  }
}


contract OwnableDelegateProxy is OwnedUpgradeabilityProxy {

    constructor(address owner, address initialImplementation, bytes calldata)
        public
    {
        setUpgradeabilityOwner(owner);
        _upgradeTo(initialImplementation);
        require(initialImplementation.delegatecall(calldata));
    }

}

pragma solidity ^0.4.13;

contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    require(newOwner != address(0));
    emit OwnershipTransferred(owner, newOwner);
    owner = newOwner;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }
}

contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender)
    public view returns (uint256);

  function transferFrom(address from, address to, uint256 value)
    public returns (bool);

  function approve(address spender, uint256 value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

contract ProxyRegistry is Ownable {

    /* DelegateProxy implementation contract. Must be initialized. */
    address public delegateProxyImplementation;

    /* Authenticated proxies by user. */
    mapping(address => OwnableDelegateProxy) public proxies;

    /* Contracts pending access. */
    mapping(address => uint) public pending;

    /* Contracts allowed to call those proxies. */
    mapping(address => bool) public contracts;

    /* Delay period for adding an authenticated contract.
       This mitigates a particular class of potential attack on the Wyvern DAO (which owns this registry) - if at any point the value of assets held by proxy contracts exceeded the value of half the WYV supply (votes in the DAO),
       a malicious but rational attacker could buy half the Wyvern and grant themselves access to all the proxy contracts. A delay period renders this attack nonthreatening - given two weeks, if that happened, users would have
       plenty of time to notice and transfer their assets.
    */
    uint public DELAY_PERIOD = 2 weeks;

    /**
     * Start the process to enable access for specified contract. Subject to delay period.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function startGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] == 0);
        pending[addr] = now;
    }

    /**
     * End the process to nable access for specified contract after delay period has passed.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address to which to grant permissions
     */
    function endGrantAuthentication (address addr)
        public
        onlyOwner
    {
        require(!contracts[addr] && pending[addr] != 0 && ((pending[addr] + DELAY_PERIOD) < now));
        pending[addr] = 0;
        contracts[addr] = true;
    }

    /**
     * Revoke access for specified contract. Can be done instantly.
     *
     * @dev ProxyRegistry owner only
     * @param addr Address of which to revoke permissions
     */    
    function revokeAuthentication (address addr)
        public
        onlyOwner
    {
        contracts[addr] = false;
    }

    /**
     * Register a proxy contract with this registry
     *
     * @dev Must be called by the user which the proxy is for, creates a new AuthenticatedProxy
     * @return New AuthenticatedProxy contract
     */
    function registerProxy()
        public
        returns (OwnableDelegateProxy proxy)
    {
        require(proxies[msg.sender] == address(0));
        proxy = new OwnableDelegateProxy(msg.sender, delegateProxyImplementation, abi.encodeWithSignature("initialize(address,address)", msg.sender, address(this)));
        proxies[msg.sender] = proxy;
        return proxy;
    }

}

contract TokenRecipient {
    event ReceivedEther(address indexed sender, uint amount);
    event ReceivedTokens(address indexed from, uint256 value, address indexed token, bytes extraData);

    /**
     * @dev Receive tokens and generate a log event
     * @param from Address from which to transfer tokens
     * @param value Amount of tokens to transfer
     * @param token Address of token
     * @param extraData Additional data to log
     */
    function receiveApproval(address from, uint256 value, address token, bytes extraData) public {
        ERC20 t = ERC20(token);
        require(t.transferFrom(from, this, value));
        emit ReceivedTokens(from, value, token, extraData);
    }

    /**
     * @dev Receive Ether and generate a log event
     */
    function () payable public {
        emit ReceivedEther(msg.sender, msg.value);
    }
}

contract OwnedUpgradeabilityStorage {

  // Current implementation
  address internal _implementation;

  // Owner of the contract
  address private _upgradeabilityOwner;

  /**
   * @dev Tells the address of the owner
   * @return the address of the owner
   */
  function upgradeabilityOwner() public view returns (address) {
    return _upgradeabilityOwner;
  }

  /**
   * @dev Sets the address of the owner
   */
  function setUpgradeabilityOwner(address newUpgradeabilityOwner) internal {
    _upgradeabilityOwner = newUpgradeabilityOwner;
  }

  /**
  * @dev Tells the address of the current implementation
  * @return address of the current implementation
  */
  function implementation() public view returns (address) {
    return _implementation;
  }

  /**
  * @dev Tells the proxy type (EIP 897)
  * @return Proxy type, 2 for forwarding proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId) {
    return 2;
  }
}

contract AuthenticatedProxy is TokenRecipient, OwnedUpgradeabilityStorage {

    /* Whether initialized. */
    bool initialized = false;

    /* Address which owns this proxy. */
    address public user;

    /* Associated registry with contract authentication information. */
    ProxyRegistry public registry;

    /* Whether access has been revoked. */
    bool public revoked;

    /* Delegate call could be used to atomically transfer multiple assets owned by the proxy contract with one order. */
    enum HowToCall { Call, DelegateCall }

    /* Event fired when the proxy access is revoked or unrevoked. */
    event Revoked(bool revoked);

    /**
     * Initialize an AuthenticatedProxy
     *
     * @param addrUser Address of user on whose behalf this proxy will act
     * @param addrRegistry Address of ProxyRegistry contract which will manage this proxy
     */
    function initialize (address addrUser, ProxyRegistry addrRegistry)
        public
    {
        require(!initialized);
        initialized = true;
        user = addrUser;
        registry = addrRegistry;
    }

    /**
     * Set the revoked flag (allows a user to revoke ProxyRegistry access)
     *
     * @dev Can be called by the user only
     * @param revoke Whether or not to revoke access
     */
    function setRevoke(bool revoke)
        public
    {
        require(msg.sender == user);
        revoked = revoke;
        emit Revoked(revoke);
    }

    /**
     * Execute a message call from the proxy contract
     *
     * @dev Can be called by the user, or by a contract authorized by the registry as long as the user has not revoked access
     * @param dest Address to which the call will be sent
     * @param howToCall Which kind of call to make
     * @param calldata Calldata to send
     * @return Result of the call (success or failure)
     */
    function proxy(address dest, HowToCall howToCall, bytes calldata)
        public
        returns (bool result)
    {
        require(msg.sender == user || (!revoked && registry.contracts(msg.sender)));
        if (howToCall == HowToCall.Call) {
            result = dest.call(calldata);
        } else if (howToCall == HowToCall.DelegateCall) {
            result = dest.delegatecall(calldata);
        }
        return result;
    }

    /**
     * Execute a message call and assert success
     * 
     * @dev Same functionality as `proxy`, just asserts the return value
     * @param dest Address to which the call will be sent
     * @param howToCall What kind of call to make
     * @param calldata Calldata to send
     */
    function proxyAssert(address dest, HowToCall howToCall, bytes calldata)
        public
    {
        require(proxy(dest, howToCall, calldata));
    }

}

contract Proxy {

  /**
  * @dev Tells the address of the implementation where every call will be delegated.
  * @return address of the implementation to which it will be delegated
  */
  function implementation() public view returns (address);

  /**
  * @dev Tells the type of proxy (EIP 897)
  * @return Type of proxy, 2 for upgradeable proxy
  */
  function proxyType() public pure returns (uint256 proxyTypeId);

  /**
  * @dev Fallback function allowing to perform a delegatecall to the given implementation.
  * This function will return whatever the implementation call returns
  */
  function () payable public {
    address _impl = implementation();
    require(_impl != address(0));

    assembly {
      let ptr := mload(0x40)
      calldatacopy(ptr, 0, calldatasize)
      let result := delegatecall(gas, _impl, ptr, calldatasize, 0, 0)
      let size := returndatasize
      returndatacopy(ptr, 0, size)

      switch result
      case 0 { revert(ptr, size) }
      default { return(ptr, size) }
    }
  }
}

contract OwnedUpgradeabilityProxy is Proxy, OwnedUpgradeabilityStorage {
  /**
  * @dev Event to show ownership has been transferred
  * @param previousOwner representing the address of the previous owner
  * @param newOwner representing the address of the new owner
  */
  event ProxyOwnershipTransferred(address previousOwner, address newOwner);

  /**
  * @dev This event will be emitted every time the implementation gets upgraded
  * @param implementation representing the address of the upgraded implementation
  */
  event Upgraded(address indexed implementation);

  /**
  * @dev Upgrades the implementation address
  * @param implementation representing the address of the new implementation to be set
  */
  function _upgradeTo(address implementation) internal {
    require(_implementation != implementation);
    _implementation = implementation;
    emit Upgraded(implementation);
  }

  /**
  * @dev Throws if called by any account other than the owner.
  */
  modifier onlyProxyOwner() {
    require(msg.sender == proxyOwner());
    _;
  }

  /**
   * @dev Tells the address of the proxy owner
   * @return the address of the proxy owner
   */
  function proxyOwner() public view returns (address) {
    return upgradeabilityOwner();
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferProxyOwnership(address newOwner) public onlyProxyOwner {
    require(newOwner != address(0));
    emit ProxyOwnershipTransferred(proxyOwner(), newOwner);
    setUpgradeabilityOwner(newOwner);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy.
   * @param implementation representing the address of the new implementation to be set.
   */
  function upgradeTo(address implementation) public onlyProxyOwner {
    _upgradeTo(implementation);
  }

  /**
   * @dev Allows the upgradeability owner to upgrade the current implementation of the proxy
   * and delegatecall the new implementation for initialization.
   * @param implementation representing the address of the new implementation to be set.
   * @param data represents the msg.data to bet sent in the low level call. This parameter may include the function
   * signature of the implementation to be called with the needed payload
   */
  function upgradeToAndCall(address implementation, bytes data) payable public onlyProxyOwner {
    upgradeTo(implementation);
    require(address(this).delegatecall(data));
  }
}

contract OwnableDelegateProxy is OwnedUpgradeabilityProxy {

    constructor(address owner, address initialImplementation, bytes calldata)
        public
    {
        setUpgradeabilityOwner(owner);
        _upgradeTo(initialImplementation);
        require(initialImplementation.delegatecall(calldata));
    }

}

pragma solidity ^0.4.13;

library WyvernAtomicizer {

    function atomicize (address[] addrs, uint[] values, uint[] calldataLengths, bytes calldatas)
        public
    {
        require(addrs.length == values.length && addrs.length == calldataLengths.length);

        uint j = 0;
        for (uint i = 0; i < addrs.length; i++) {
            bytes memory calldata = new bytes(calldataLengths[i]);
            for (uint k = 0; k < calldataLengths[i]; k++) {
                calldata[k] = calldatas[j];
                j++;
            }
            require(addrs[i].call.value(values[i])(calldata));
        }
    }

}