// SPDX-License-Identifier: MIT

pragma solidity 0.8.23;

import { IERC20 } from "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "solidity-utils/contracts/libraries/SafeERC20.sol";
import { AddressLib, Address } from "solidity-utils/contracts/libraries/AddressLib.sol";

import { Timelocks, TimelocksLib } from "./libraries/TimelocksLib.sol";

import { IEscrowDst } from "./interfaces/IEscrowDst.sol";
import { BaseEscrow } from "./BaseEscrow.sol";
import { Escrow } from "./Escrow.sol";

/**
 * @title Destination Escrow contract for cross-chain atomic swap.
 * @notice Contract to initially lock funds and then unlock them with verification of the secret presented.
 * @dev Funds are locked in at the time of contract deployment. For this taker calls the `EscrowFactory.createDstEscrow` function.
 * To perform any action, the caller must provide the same Immutables values used to deploy the clone contract.
 * @custom:security-contact [email protected]
 */
contract EscrowDst is Escrow, IEscrowDst {
    using SafeERC20 for IERC20;
    using AddressLib for Address;
    using TimelocksLib for Timelocks;

    constructor(uint32 rescueDelay, IERC20 accessToken) BaseEscrow(rescueDelay, accessToken) {}

    /**
     * @notice See {IBaseEscrow-withdraw}.
     * @dev The function works on the time intervals highlighted with capital letters:
     * ---- contract deployed --/-- finality --/-- PRIVATE WITHDRAWAL --/-- PUBLIC WITHDRAWAL --/-- private cancellation ----
     */
    function withdraw(bytes32 secret, Immutables calldata immutables)
        external
        onlyTaker(immutables)
        onlyAfter(immutables.timelocks.get(TimelocksLib.Stage.DstWithdrawal))
        onlyBefore(immutables.timelocks.get(TimelocksLib.Stage.DstCancellation))
    {
        _withdraw(secret, immutables);
    }

    /**
     * @notice See {IBaseEscrow-publicWithdraw}.
     * @dev The function works on the time intervals highlighted with capital letters:
     * ---- contract deployed --/-- finality --/-- private withdrawal --/-- PUBLIC WITHDRAWAL --/-- private cancellation ----
     */
    function publicWithdraw(bytes32 secret, Immutables calldata immutables)
        external
        onlyAccessTokenHolder()
        onlyAfter(immutables.timelocks.get(TimelocksLib.Stage.DstPublicWithdrawal))
        onlyBefore(immutables.timelocks.get(TimelocksLib.Stage.DstCancellation))
    {
        _withdraw(secret, immutables);
    }

    /**
     * @notice See {IBaseEscrow-cancel}.
     * @dev The function works on the time interval highlighted with capital letters:
     * ---- contract deployed --/-- finality --/-- private withdrawal --/-- public withdrawal --/-- PRIVATE CANCELLATION ----
     */
    function cancel(Immutables calldata immutables)
        external
        onlyTaker(immutables)
        onlyValidImmutables(immutables)
        onlyAfter(immutables.timelocks.get(TimelocksLib.Stage.DstCancellation))
    {
        _uniTransfer(immutables.token.get(), immutables.taker.get(), immutables.amount);
        _ethTransfer(msg.sender, immutables.safetyDeposit);
        emit EscrowCancelled();
    }

    /**
     * @dev Transfers ERC20 (or native) tokens to the maker and native tokens to the caller.
     * @param immutables The immutable values used to deploy the clone contract.
     */
    function _withdraw(bytes32 secret, Immutables calldata immutables)
        internal
        onlyValidImmutables(immutables)
        onlyValidSecret(secret, immutables)
    {
        _uniTransfer(immutables.token.get(), immutables.maker.get(), immutables.amount);
        _ethTransfer(msg.sender, immutables.safetyDeposit);
        emit EscrowWithdrawal(secret);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import "../interfaces/IDaiLikePermit.sol";
import "../interfaces/IPermit2.sol";
import "../interfaces/IERC7597Permit.sol";
import "../interfaces/IWETH.sol";
import "../libraries/RevertReasonForwarder.sol";

/**
 * @title Implements efficient safe methods for ERC20 interface.
 * @notice Compared to the standard ERC20, this implementation offers several enhancements:
 * 1. more gas-efficient, providing significant savings in transaction costs.
 * 2. support for different permit implementations
 * 3. forceApprove functionality
 * 4. support for WETH deposit and withdraw
 */
library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();
    error Permit2TransferAmountTooHigh();

    // Uniswap Permit2 address
    address private constant _PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
    bytes4 private constant _PERMIT_LENGTH_ERROR = 0x68275857;  // SafePermitBadLength.selector
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;

    /**
     * @notice Fetches the balance of a specific ERC20 token held by an account.
     * Consumes less gas then regular `ERC20.balanceOf`.
     * @dev Note that the implementation does not perform dirty bits cleaning, so it is the
     * responsibility of the caller to make sure that the higher 96 bits of the `account` parameter are clean.
     * @param token The IERC20 token contract for which the balance will be fetched.
     * @param account The address of the account whose token balance will be fetched.
     * @return tokenBalance The balance of the specified ERC20 token held by the account.
     */
    function safeBalanceOf(
        IERC20 token,
        address account
    ) internal view returns(uint256 tokenBalance) {
        bytes4 selector = IERC20.balanceOf.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            mstore(0x00, selector)
            mstore(0x04, account)
            let success := staticcall(gas(), token, 0x00, 0x24, 0x00, 0x20)
            tokenBalance := mload(0)

            if or(iszero(success), lt(returndatasize(), 0x20)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }

    /**
     * @notice Attempts to safely transfer tokens from one address to another.
     * @dev If permit2 is true, uses the Permit2 standard; otherwise uses the standard ERC20 transferFrom.
     * Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     * @param permit2 If true, uses the Permit2 standard for the transfer; otherwise uses the standard ERC20 transferFrom.
     */
    function safeTransferFromUniversal(
        IERC20 token,
        address from,
        address to,
        uint256 amount,
        bool permit2
    ) internal {
        if (permit2) {
            safeTransferFromPermit2(token, from, to, amount);
        } else {
            safeTransferFrom(token, from, to, amount);
        }
    }

    /**
     * @notice Attempts to safely transfer tokens from one address to another using the ERC20 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }

    /**
     * @notice Attempts to safely transfer tokens from one address to another using the Permit2 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFromPermit2(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (amount > type(uint160).max) revert Permit2TransferAmountTooHigh();
        bytes4 selector = IPermit2.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            mstore(add(data, 0x64), token)
            success := call(gas(), _PERMIT2, 0, data, 0x84, 0x0, 0x0)
            if success {
                success := gt(extcodesize(_PERMIT2), 0)
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }

    /**
     * @notice Attempts to safely transfer tokens to another address.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `to` parameter are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param value The amount of tokens to transfer.
     */
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }

    /**
     * @notice Attempts to approve a spender to spend a certain amount of tokens.
     * @dev If `approve(from, to, amount)` fails, it tries to set the allowance to zero, and retries the `approve` call.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function forceApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (
                !_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value)
            ) {
                revert ForceApproveFailed();
            }
        }
    }

    /**
     * @notice Safely increases the allowance of a spender.
     * @dev Increases with safe math check. Checks if the increased allowance will overflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to increase the allowance by.
     */
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }

    /**
     * @notice Safely decreases the allowance of a spender.
     * @dev Decreases with safe math check. Checks if the decreased allowance will underflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to decrease the allowance by.
     */
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }

    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, bytes calldata permit) internal {
        if (!tryPermit(token, msg.sender, address(this), permit)) RevertReasonForwarder.reRevert();
    }

    /**
     * @notice Attempts to execute the `permit` function on the provided token with custom owner and spender parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The IERC20 token to execute the permit function on.
     * @param owner The owner of the tokens for which the permit is made.
     * @param spender The spender allowed to spend the tokens by the permit.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, address owner, address spender, bytes calldata permit) internal {
        if (!tryPermit(token, owner, spender, permit)) RevertReasonForwarder.reRevert();
    }

    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * @dev Invokes `tryPermit` with sender as owner and contract as spender.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     * @return success Returns true if the permit function was successfully executed, false otherwise.
     */
    function tryPermit(IERC20 token, bytes calldata permit) internal returns(bool success) {
        return tryPermit(token, msg.sender, address(this), permit);
    }

    /**
     * @notice The function attempts to call the permit function on a given ERC20 token.
     * @dev The function is designed to support a variety of permit functions, namely: IERC20Permit, IDaiLikePermit, IERC7597Permit and IPermit2.
     * It accommodates both Compact and Full formats of these permit types.
     * Please note, it is expected that the `expiration` parameter for the compact Permit2 and the `deadline` parameter
     * for the compact Permit are to be incremented by one before invoking this function. This approach is motivated by
     * gas efficiency considerations; as the unlimited expiration period is likely to be the most common scenario, and
     * zeros are cheaper to pass in terms of gas cost. Thus, callers should increment the expiration or deadline by one
     * before invocation for optimized performance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The address of the ERC20 token on which to call the permit function.
     * @param owner The owner of the tokens. This address should have signed the off-chain permit.
     * @param spender The address which will be approved for transfer of tokens.
     * @param permit The off-chain permit data, containing different fields depending on the type of permit function.
     * @return success A boolean indicating whether the permit call was successful.
     */
    function tryPermit(IERC20 token, address owner, address spender, bytes calldata permit) internal returns(bool success) {
        // load function selectors for different permit standards
        bytes4 permitSelector = IERC20Permit.permit.selector;
        bytes4 daiPermitSelector = IDaiLikePermit.permit.selector;
        bytes4 permit2Selector = IPermit2.permit.selector;
        bytes4 erc7597PermitSelector = IERC7597Permit.permit.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            // Switch case for different permit lengths, indicating different permit standards
            switch permit.length
            // Compact IERC20Permit
            case 100 {
                mstore(ptr, permitSelector)     // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender

                // Compact IERC20Permit.permit(uint256 value, uint32 deadline, uint256 r, uint256 vs)
                {  // stack too deep
                    let deadline := shr(224, calldataload(add(permit.offset, 0x20))) // loads permit.offset 0x20..0x23
                    let vs := calldataload(add(permit.offset, 0x44))                 // loads permit.offset 0x44..0x63

                    calldatacopy(add(ptr, 0x44), permit.offset, 0x20)            // store value     = copy permit.offset 0x00..0x19
                    mstore(add(ptr, 0x64), sub(deadline, 1))                     // store deadline  = deadline - 1
                    mstore(add(ptr, 0x84), add(27, shr(255, vs)))                // store v         = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xa4), add(permit.offset, 0x24), 0x20) // store r         = copy permit.offset 0x24..0x43
                    mstore(add(ptr, 0xc4), shr(1, shl(1, vs)))                   // store s         = vs without most significant bit
                }
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // Compact IDaiLikePermit
            case 72 {
                mstore(ptr, daiPermitSelector)  // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender

                // Compact IDaiLikePermit.permit(uint32 nonce, uint32 expiry, uint256 r, uint256 vs)
                {  // stack too deep
                    let expiry := shr(224, calldataload(add(permit.offset, 0x04))) // loads permit.offset 0x04..0x07
                    let vs := calldataload(add(permit.offset, 0x28))               // loads permit.offset 0x28..0x47

                    mstore(add(ptr, 0x44), shr(224, calldataload(permit.offset))) // store nonce   = copy permit.offset 0x00..0x03
                    mstore(add(ptr, 0x64), sub(expiry, 1))                        // store expiry  = expiry - 1
                    mstore(add(ptr, 0x84), true)                                  // store allowed = true
                    mstore(add(ptr, 0xa4), add(27, shr(255, vs)))                 // store v       = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xc4), add(permit.offset, 0x08), 0x20)  // store r       = copy permit.offset 0x08..0x27
                    mstore(add(ptr, 0xe4), shr(1, shl(1, vs)))                    // store s       = vs without most significant bit
                }
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // IERC20Permit
            case 224 {
                mstore(ptr, permitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // IDaiLikePermit
            case 256 {
                mstore(ptr, daiPermitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // Compact IPermit2
            case 96 {
                // Compact IPermit2.permit(uint160 amount, uint32 expiration, uint32 nonce, uint32 sigDeadline, uint256 r, uint256 vs)
                mstore(ptr, permit2Selector)  // store selector
                mstore(add(ptr, 0x04), owner) // store owner
                mstore(add(ptr, 0x24), token) // store token

                calldatacopy(add(ptr, 0x50), permit.offset, 0x14)             // store amount = copy permit.offset 0x00..0x13
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0x64), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x14))), 1))) // store expiration = ((permit.offset 0x14..0x17 - 1) & 0xffffffffffff)
                mstore(add(ptr, 0x84), shr(224, calldataload(add(permit.offset, 0x18)))) // store nonce = copy permit.offset 0x18..0x1b
                mstore(add(ptr, 0xa4), spender)                               // store spender
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0xc4), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x1c))), 1))) // store sigDeadline = ((permit.offset 0x1c..0x1f - 1) & 0xffffffffffff)
                mstore(add(ptr, 0xe4), 0x100)                                 // store offset = 256
                mstore(add(ptr, 0x104), 0x40)                                 // store length = 64
                calldatacopy(add(ptr, 0x124), add(permit.offset, 0x20), 0x20) // store r      = copy permit.offset 0x20..0x3f
                calldatacopy(add(ptr, 0x144), add(permit.offset, 0x40), 0x20) // store vs     = copy permit.offset 0x40..0x5f
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // IPermit2
            case 352 {
                mstore(ptr, permit2Selector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // Dynamic length
            default {
                mstore(ptr, erc7597PermitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IERC7597Permit.permit(address owner, address spender, uint256 value, uint256 deadline, bytes memory signature)
                success := call(gas(), token, 0, ptr, add(permit.length, 4), 0, 0)
            }
        }
    }

    /**
     * @dev Executes a low level call to a token contract, making it resistant to reversion and erroneous boolean returns.
     * @param token The IERC20 token contract on which the call will be made.
     * @param selector The function signature that is to be called on the token contract.
     * @param to The address to which the token amount will be transferred.
     * @param amount The token amount to be transferred.
     * @return success A boolean indicating if the call was successful. Returns 'true' on success and 'false' on failure.
     * In case of success but no returned data, validates that the contract code exists.
     * In case of returned data, ensures that it's a boolean `true`.
     */
    function _makeCall(
        IERC20 token,
        bytes4 selector,
        address to,
        uint256 amount
    ) private returns (bool success) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
    }

    /**
     * @notice Safely deposits a specified amount of Ether into the IWETH contract. Consumes less gas then regular `IWETH.deposit`.
     * @param weth The IWETH token contract.
     * @param amount The amount of Ether to deposit into the IWETH contract.
     */
    function safeDeposit(IWETH weth, uint256 amount) internal {
        if (amount > 0) {
            bytes4 selector = IWETH.deposit.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                mstore(0, selector)
                if iszero(call(gas(), weth, amount, 0, 4, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }

    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract. Consumes less gas then regular `IWETH.withdraw`.
     * @dev Uses inline assembly to interact with the IWETH contract.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     */
    function safeWithdraw(IWETH weth, uint256 amount) internal {
        bytes4 selector = IWETH.withdraw.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            mstore(0, selector)
            mstore(4, amount)
            if iszero(call(gas(), weth, 0, 0, 0x24, 0, 0)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }

    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract to a specified recipient.
     * Consumes less gas then regular `IWETH.withdraw`.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     * @param to The recipient of the withdrawn Ether.
     */
    function safeWithdrawTo(IWETH weth, uint256 amount, address to) internal {
        safeWithdraw(weth, amount);
        if (to != address(this)) {
            assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
                if iszero(call(_RAW_CALL_GAS_LIMIT, to, amount, 0, 0, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

type Address is uint256;

/**
* @notice AddressLib
* @notice Library for working with addresses encoded as uint256 values, which can include flags in the highest bits.
*/
library AddressLib {
    uint256 private constant _LOW_160_BIT_MASK = (1 << 160) - 1;

    /**
    * @notice Returns the address representation of a uint256.
    * @param a The uint256 value to convert to an address.
    * @return The address representation of the provided uint256 value.
    */
    function get(Address a) internal pure returns (address) {
        return address(uint160(Address.unwrap(a) & _LOW_160_BIT_MASK));
    }

    /**
    * @notice Checks if a given flag is set for the provided address.
    * @param a The address to check for the flag.
    * @param flag The flag to check for in the provided address.
    * @return True if the provided flag is set in the address, false otherwise.
    */
    function getFlag(Address a, uint256 flag) internal pure returns (bool) {
        return (Address.unwrap(a) & flag) != 0;
    }

    /**
    * @notice Returns a uint32 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint32 value.
    * @param offset The bit offset at which the uint32 value is stored.
    * @return The uint32 value stored in the address at the specified bit offset.
    */
    function getUint32(Address a, uint256 offset) internal pure returns (uint32) {
        return uint32(Address.unwrap(a) >> offset);
    }

    /**
    * @notice Returns a uint64 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint64 value.
    * @param offset The bit offset at which the uint64 value is stored.
    * @return The uint64 value stored in the address at the specified bit offset.
    */
    function getUint64(Address a, uint256 offset) internal pure returns (uint64) {
        return uint64(Address.unwrap(a) >> offset);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Timelocks for the source and the destination chains plus the deployment timestamp.
 * Timelocks store the number of seconds from the time the contract is deployed to the start of a specific period.
 * For illustrative purposes, it is possible to describe timelocks by two structures:
 * struct SrcTimelocks {
 *     uint256 withdrawal;
 *     uint256 publicWithdrawal;
 *     uint256 cancellation;
 *     uint256 publicCancellation;
 * }
 *
 * struct DstTimelocks {
 *     uint256 withdrawal;
 *     uint256 publicWithdrawal;
 *     uint256 cancellation;
 * }
 *
 * withdrawal: Period when only the taker with a secret can withdraw tokens for taker (source chain) or maker (destination chain).
 * publicWithdrawal: Period when anyone with a secret can withdraw tokens for taker (source chain) or maker (destination chain).
 * cancellation: Period when escrow can only be cancelled by the taker.
 * publicCancellation: Period when escrow can be cancelled by anyone.
 *
 * @custom:security-contact [email protected]
 */
type Timelocks is uint256;

/**
 * @title Timelocks library for compact storage of timelocks in a uint256.
 */
library TimelocksLib {
    enum Stage {
        SrcWithdrawal,
        SrcPublicWithdrawal,
        SrcCancellation,
        SrcPublicCancellation,
        DstWithdrawal,
        DstPublicWithdrawal,
        DstCancellation
    }

    uint256 private constant _DEPLOYED_AT_MASK = 0xffffffff00000000000000000000000000000000000000000000000000000000;
    uint256 private constant _DEPLOYED_AT_OFFSET = 224;

    /**
     * @notice Sets the Escrow deployment timestamp.
     * @param timelocks The timelocks to set the deployment timestamp to.
     * @param value The new Escrow deployment timestamp.
     * @return The timelocks with the deployment timestamp set.
     */
    function setDeployedAt(Timelocks timelocks, uint256 value) internal pure returns (Timelocks) {
        return Timelocks.wrap((Timelocks.unwrap(timelocks) & ~uint256(_DEPLOYED_AT_MASK)) | value << _DEPLOYED_AT_OFFSET);
    }

    /**
     * @notice Returns the start of the rescue period.
     * @param timelocks The timelocks to get the rescue delay from.
     * @return The start of the rescue period.
     */
    function rescueStart(Timelocks timelocks, uint256 rescueDelay) internal pure returns (uint256) {
        unchecked {
            return rescueDelay + (Timelocks.unwrap(timelocks) >> _DEPLOYED_AT_OFFSET);
        }
    }

    /**
     * @notice Returns the timelock value for the given stage.
     * @param timelocks The timelocks to get the value from.
     * @param stage The stage to get the value for.
     * @return The timelock value for the given stage.
     */
    function get(Timelocks timelocks, Stage stage) internal pure returns (uint256) {
        uint256 data = Timelocks.unwrap(timelocks);
        uint256 bitShift = uint256(stage) * 32;
        // The maximum uint32 value will be reached in 2106.
        return (data >> _DEPLOYED_AT_OFFSET) + uint32(data >> bitShift);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { IEscrow } from "./IEscrow.sol";

/**
 * @title Destination Escrow interface for cross-chain atomic swap.
 * @notice Interface implies withdrawing funds initially and then unlocking them with verification of the secret presented.
 * @custom:security-contact [email protected]
 */
interface IEscrowDst is IEscrow {
    /**
     * @notice Withdraws funds to maker
     * @dev Withdrawal can only be made during the withdrawal period and with secret with hash matches the hashlock.
     * @param secret The secret that unlocks the escrow.
     * @param immutables The immutables of the escrow contract.
     */
    function publicWithdraw(bytes32 secret, IEscrow.Immutables calldata immutables) external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.23;

import { IERC20 } from "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import { AddressLib, Address } from "solidity-utils/contracts/libraries/AddressLib.sol";
import { SafeERC20 } from "solidity-utils/contracts/libraries/SafeERC20.sol";

import { ImmutablesLib } from "./libraries/ImmutablesLib.sol";
import { Timelocks, TimelocksLib } from "./libraries/TimelocksLib.sol";

import { IBaseEscrow } from "./interfaces/IBaseEscrow.sol";

/**
 * @title Base abstract Escrow contract for cross-chain atomic swap.
 * @dev {IBaseEscrow-withdraw}, {IBaseEscrow-cancel} and _validateImmutables functions must be implemented in the derived contracts.
 * @custom:security-contact [email protected]
 */
abstract contract BaseEscrow is IBaseEscrow {
    using AddressLib for Address;
    using SafeERC20 for IERC20;
    using TimelocksLib for Timelocks;
    using ImmutablesLib for Immutables;

    // Token that is used to access public withdraw or cancel functions.
    IERC20 private immutable _ACCESS_TOKEN;

    /// @notice See {IBaseEscrow-RESCUE_DELAY}.
    uint256 public immutable RESCUE_DELAY;
    /// @notice See {IBaseEscrow-FACTORY}.
    address public immutable FACTORY = msg.sender;

    constructor(uint32 rescueDelay, IERC20 accessToken) {
        RESCUE_DELAY = rescueDelay;
        _ACCESS_TOKEN = accessToken;
    }

    modifier onlyTaker(Immutables calldata immutables) {
        if (msg.sender != immutables.taker.get()) revert InvalidCaller();
        _;
    }

    modifier onlyValidImmutables(Immutables calldata immutables) virtual {
        _validateImmutables(immutables);
        _;
    }

    modifier onlyValidSecret(bytes32 secret, Immutables calldata immutables) {
        if (_keccakBytes32(secret) != immutables.hashlock) revert InvalidSecret();
        _;
    }

    modifier onlyAfter(uint256 start) {
        if (block.timestamp < start) revert InvalidTime();
        _;
    }

    modifier onlyBefore(uint256 stop) {
        if (block.timestamp >= stop) revert InvalidTime();
        _;
    }

    modifier onlyAccessTokenHolder() {
        if (_ACCESS_TOKEN.balanceOf(msg.sender) == 0) revert InvalidCaller();
        _;
    }

    /**
     * @notice See {IBaseEscrow-rescueFunds}.
     */
    function rescueFunds(address token, uint256 amount, Immutables calldata immutables)
        external
        onlyTaker(immutables)
        onlyValidImmutables(immutables)
        onlyAfter(immutables.timelocks.rescueStart(RESCUE_DELAY))
    {
        _uniTransfer(token, msg.sender, amount);
        emit FundsRescued(token, amount);
    }

    /**
     * @dev Transfers ERC20 or native tokens to the recipient.
     */
    function _uniTransfer(address token, address to, uint256 amount) internal {
        if (token == address(0)) {
            _ethTransfer(to, amount);
        } else {
            IERC20(token).safeTransfer(to, amount);
        }
    }

    /**
     * @dev Transfers native tokens to the recipient.
     */
    function _ethTransfer(address to, uint256 amount) internal {
        (bool success,) = to.call{ value: amount }("");
        if (!success) revert NativeTokenSendingFailure();
    }

    /**
     * @dev Should verify that the computed escrow address matches the address of this contract.
     */
    function _validateImmutables(Immutables calldata immutables) internal view virtual;

    /**
     * @dev Computes the Keccak-256 hash of the secret.
     * @param secret The secret that unlocks the escrow.
     * @return ret The computed hash.
     */
    function _keccakBytes32(bytes32 secret) private pure returns (bytes32 ret) {
        assembly ("memory-safe") {
            mstore(0, secret)
            ret := keccak256(0, 0x20)
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.23;

import { Create2 } from "openzeppelin-contracts/contracts/utils/Create2.sol";

import { ImmutablesLib } from "./libraries/ImmutablesLib.sol";
import { ProxyHashLib } from "./libraries/ProxyHashLib.sol";

import { IEscrow } from "./interfaces/IEscrow.sol";
import { BaseEscrow } from "./BaseEscrow.sol";

/**
 * @title Abstract Escrow contract for cross-chain atomic swap.
 * @dev {IBaseEscrow-withdraw} and {IBaseEscrow-cancel} functions must be implemented in the derived contracts.
 * @custom:security-contact [email protected]
 */
abstract contract Escrow is BaseEscrow, IEscrow {
    using ImmutablesLib for Immutables;

    /// @notice See {IEscrow-PROXY_BYTECODE_HASH}.
    bytes32 public immutable PROXY_BYTECODE_HASH = ProxyHashLib.computeProxyBytecodeHash(address(this));


    /**
     * @dev Verifies that the computed escrow address matches the address of this contract.
     */
    function _validateImmutables(Immutables calldata immutables) internal view virtual override {
        bytes32 salt = immutables.hash();
        if (Create2.computeAddress(salt, PROXY_BYTECODE_HASH, FACTORY) != address(this)) {
            revert InvalidImmutables();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title IDaiLikePermit
 * @dev Interface for Dai-like permit function allowing token spending via signatures.
 */
interface IDaiLikePermit {
    /**
     * @notice Approves spending of tokens via off-chain signatures.
     * @param holder Token holder's address.
     * @param spender Spender's address.
     * @param nonce Current nonce of the holder.
     * @param expiry Time when the permit expires.
     * @param allowed True to allow, false to disallow spending.
     * @param v, r, s Signature components.
     */
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title IPermit2
 * @dev Interface for a flexible permit system that extends ERC20 tokens to support permits in tokens lacking native permit functionality.
 */
interface IPermit2 {
    /**
     * @dev Struct for holding permit details.
     * @param token ERC20 token address for which the permit is issued.
     * @param amount The maximum amount allowed to spend.
     * @param expiration Timestamp until which the permit is valid.
     * @param nonce An incrementing value for each signature, unique per owner, token, and spender.
     */
    struct PermitDetails {
        address token;
        uint160 amount;
        uint48 expiration;
        uint48 nonce;
    }

    /**
     * @dev Struct for a single token allowance permit.
     * @param details Permit details including token, amount, expiration, and nonce.
     * @param spender Address authorized to spend the tokens.
     * @param sigDeadline Deadline for the permit signature, ensuring timeliness of the permit.
     */
    struct PermitSingle {
        PermitDetails details;
        address spender;
        uint256 sigDeadline;
    }

    /**
     * @dev Struct for packed allowance data to optimize storage.
     * @param amount Amount allowed.
     * @param expiration Permission expiry timestamp.
     * @param nonce Unique incrementing value for tracking allowances.
     */
    struct PackedAllowance {
        uint160 amount;
        uint48 expiration;
        uint48 nonce;
    }

    /**
     * @notice Executes a token transfer from one address to another.
     * @param user The token owner's address.
     * @param spender The address authorized to spend the tokens.
     * @param amount The amount of tokens to transfer.
     * @param token The address of the token being transferred.
     */
    function transferFrom(address user, address spender, uint160 amount, address token) external;

    /**
     * @notice Issues a permit for spending tokens via a signed authorization.
     * @param owner The token owner's address.
     * @param permitSingle Struct containing the permit details.
     * @param signature The signature proving the owner authorized the permit.
     */
    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;

    /**
     * @notice Retrieves the allowance details between a token owner and spender.
     * @param user The token owner's address.
     * @param token The token address.
     * @param spender The spender's address.
     * @return The packed allowance details.
     */
    function allowance(address user, address token, address spender) external view returns (PackedAllowance memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title IERC7597Permit
 * @dev A new extension for ERC-2612 permit, which has already been added to USDC v2.2.
 */
interface IERC7597Permit {
    /**
     * @notice Update allowance with a signed permit.
     * @dev Signature bytes can be used for both EOA wallets and contract wallets.
     * @param owner Token owner's address (Authorizer).
     * @param spender Spender's address.
     * @param value Amount of allowance.
     * @param deadline The time at which the signature expires (unixtime).
     * @param signature Unstructured bytes signature signed by an EOA wallet or a contract wallet.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title IWETH
 * @dev Interface for wrapper as WETH-like token.
 */
interface IWETH is IERC20 {
    /**
     * @notice Emitted when Ether is deposited to get wrapper tokens.
     */
    event Deposit(address indexed dst, uint256 wad);

    /**
     * @notice Emitted when wrapper tokens is withdrawn as Ether.
     */
    event Withdrawal(address indexed src, uint256 wad);

    /**
     * @notice Deposit Ether to get wrapper tokens.
     */
    function deposit() external payable;

    /**
     * @notice Withdraw wrapped tokens as Ether.
     * @param amount Amount of wrapped tokens to withdraw.
     */
    function withdraw(uint256 amount) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title RevertReasonForwarder
 * @notice Provides utilities for forwarding and retrieving revert reasons from failed external calls.
 */
library RevertReasonForwarder {
    /**
     * @dev Forwards the revert reason from the latest external call.
     * This method allows propagating the revert reason of a failed external call to the caller.
     */
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }

    /**
     * @dev Retrieves the revert reason from the latest external call.
     * This method enables capturing the revert reason of a failed external call for inspection or processing.
     * @return reason The latest external call revert reason.
     */
    function reReason() internal pure returns (bytes memory reason) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            reason := mload(0x40)
            let length := returndatasize()
            mstore(reason, length)
            returndatacopy(add(reason, 0x20), 0, length)
            mstore(0x40, add(reason, add(0x20, length)))
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { IBaseEscrow } from "./IBaseEscrow.sol";

/**
 * @title Escrow interface for cross-chain atomic swap.
 * @notice Interface implies locking funds initially and then unlocking them with verification of the secret presented.
 * @custom:security-contact [email protected]
 */
interface IEscrow is IBaseEscrow {
    /// @notice Returns the bytecode hash of the proxy contract.
    function PROXY_BYTECODE_HASH() external view returns (bytes32); // solhint-disable-line func-name-mixedcase
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { IBaseEscrow } from "../interfaces/IBaseEscrow.sol";

/**
 * @title Library for escrow immutables.
 * @custom:security-contact [email protected]
 */
library ImmutablesLib {
    uint256 internal constant ESCROW_IMMUTABLES_SIZE = 0x100;

    /**
     * @notice Returns the hash of the immutables.
     * @param immutables The immutables to hash.
     * @return ret The computed hash.
     */
    function hash(IBaseEscrow.Immutables calldata immutables) internal pure returns(bytes32 ret) {
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            calldatacopy(ptr, immutables, ESCROW_IMMUTABLES_SIZE)
            ret := keccak256(ptr, ESCROW_IMMUTABLES_SIZE)
        }
    }

    /**
     * @notice Returns the hash of the immutables.
     * @param immutables The immutables to hash.
     * @return ret The computed hash.
     */
    function hashMem(IBaseEscrow.Immutables memory immutables) internal pure returns(bytes32 ret) {
        assembly ("memory-safe") {
            ret := keccak256(immutables, ESCROW_IMMUTABLES_SIZE)
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { Address } from "solidity-utils/contracts/libraries/AddressLib.sol";

import { Timelocks } from "../libraries/TimelocksLib.sol";

/**
 * @title Base Escrow interface for cross-chain atomic swap.
 * @notice Interface implies locking funds initially and then unlocking them with verification of the secret presented.
 * @custom:security-contact [email protected]
 */
interface IBaseEscrow {
    struct Immutables {
        bytes32 orderHash;
        bytes32 hashlock;  // Hash of the secret.
        Address maker;
        Address taker;
        Address token;
        uint256 amount;
        uint256 safetyDeposit;
        Timelocks timelocks;
    }

    /**
     * @notice Emitted on escrow cancellation.
     */
    event EscrowCancelled();

    /**
     * @notice Emitted when funds are rescued.
     * @param token The address of the token rescued. Zero address for native token.
     * @param amount The amount of tokens rescued.
     */
    event FundsRescued(address token, uint256 amount);

    /**
     * @notice Emitted on successful withdrawal.
     * @param secret The secret that unlocks the escrow.
     */
    event EscrowWithdrawal(bytes32 secret);

    error InvalidCaller();
    error InvalidImmutables();
    error InvalidSecret();
    error InvalidTime();
    error NativeTokenSendingFailure();

    /* solhint-disable func-name-mixedcase */
    /// @notice Returns the delay for rescuing funds from the escrow.
    function RESCUE_DELAY() external view returns (uint256);
    /// @notice Returns the address of the factory that created the escrow.
    function FACTORY() external view returns (address);
    /* solhint-enable func-name-mixedcase */

    /**
     * @notice Withdraws funds to a predetermined recipient.
     * @dev Withdrawal can only be made during the withdrawal period and with secret with hash matches the hashlock.
     * The safety deposit is sent to the caller.
     * @param secret The secret that unlocks the escrow.
     * @param immutables The immutables of the escrow contract.
     */
    function withdraw(bytes32 secret, Immutables calldata immutables) external;

    /**
     * @notice Cancels the escrow and returns tokens to a predetermined recipient.
     * @dev The escrow can only be cancelled during the cancellation period.
     * The safety deposit is sent to the caller.
     * @param immutables The immutables of the escrow contract.
     */
    function cancel(Immutables calldata immutables) external;

    /**
     * @notice Rescues funds from the escrow.
     * @dev Funds can only be rescued by the taker after the rescue delay.
     * @param token The address of the token to rescue. Zero address for native token.
     * @param amount The amount of tokens to rescue.
     * @param immutables The immutables of the escrow contract.
     */
    function rescueFunds(address token, uint256 amount, Immutables calldata immutables) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Create2.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";

/**
 * @dev Helper to make usage of the `CREATE2` EVM opcode easier and safer.
 * `CREATE2` can be used to compute in advance the address where a smart
 * contract will be deployed, which allows for interesting new mechanisms known
 * as 'counterfactual interactions'.
 *
 * See the https://eips.ethereum.org/EIPS/eip-1014#motivation[EIP] for more
 * information.
 */
library Create2 {
    /**
     * @dev There's no code to deploy.
     */
    error Create2EmptyBytecode();

    /**
     * @dev Deploys a contract using `CREATE2`. The address where the contract
     * will be deployed can be known in advance via {computeAddress}.
     *
     * The bytecode for a contract can be obtained from Solidity with
     * `type(contractName).creationCode`.
     *
     * Requirements:
     *
     * - `bytecode` must not be empty.
     * - `salt` must have not been used for `bytecode` already.
     * - the factory must have a balance of at least `amount`.
     * - if `amount` is non-zero, `bytecode` must have a `payable` constructor.
     */
    function deploy(uint256 amount, bytes32 salt, bytes memory bytecode) internal returns (address addr) {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }
        if (bytecode.length == 0) {
            revert Create2EmptyBytecode();
        }
        /// @solidity memory-safe-assembly
        assembly {
            addr := create2(amount, add(bytecode, 0x20), mload(bytecode), salt)
        }
        if (addr == address(0)) {
            revert Errors.FailedDeployment();
        }
    }

    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy}. Any change in the
     * `bytecodeHash` or `salt` will result in a new destination address.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash) internal view returns (address) {
        return computeAddress(salt, bytecodeHash, address(this));
    }

    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy} from a contract located at
     * `deployer`. If `deployer` is this contract's address, returns the same value as {computeAddress}.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash, address deployer) internal pure returns (address addr) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40) // Get free memory pointer

            // |                   | ↓ ptr ...  ↓ ptr + 0x0B (start) ...  ↓ ptr + 0x20 ...  ↓ ptr + 0x40 ...   |
            // |-------------------|---------------------------------------------------------------------------|
            // | bytecodeHash      |                                                        CCCCCCCCCCCCC...CC |
            // | salt              |                                      BBBBBBBBBBBBB...BB                   |
            // | deployer          | 000000...0000AAAAAAAAAAAAAAAAAAA...AA                                     |
            // | 0xFF              |            FF                                                             |
            // |-------------------|---------------------------------------------------------------------------|
            // | memory            | 000000...00FFAAAAAAAAAAAAAAAAAAA...AABBBBBBBBBBBBB...BBCCCCCCCCCCCCC...CC |
            // | keccak(start, 85) |            ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑ |

            mstore(add(ptr, 0x40), bytecodeHash)
            mstore(add(ptr, 0x20), salt)
            mstore(ptr, deployer) // Right-aligned with 12 preceding garbage bytes
            let start := add(ptr, 0x0b) // The hashed data starts at the final garbage byte which we will set to 0xff
            mstore8(start, 0xff)
            addr := and(keccak256(start, 85), 0xffffffffffffffffffffffffffffffffffffffff)
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @title Library to compute the hash of the proxy bytecode.
 * @custom:security-contact [email protected]
 */
library ProxyHashLib {
    /**
     * @notice Returns the hash of the proxy bytecode concatenated with the implementation address.
     * @param implementation The address of the contract to clone.
     * @return bytecodeHash The hash of the resulting bytecode.
     */
    function computeProxyBytecodeHash(address implementation) internal pure returns (bytes32 bytecodeHash) {
        assembly ("memory-safe") {
            // Stores the bytecode after address
            mstore(0x20, 0x5af43d82803e903d91602b57fd5bf3)
            // implementation address
            mstore(0x11, implementation)
            // Packs the first 3 bytes of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0x88, implementation), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            bytecodeHash := keccak256(0x09, 0x37)
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Collection of common custom errors used in multiple contracts
 *
 * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
 * It is recommended to avoid relying on the error API for critical functionality.
 */
library Errors {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error InsufficientBalance(uint256 balance, uint256 needed);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedCall();

    /**
     * @dev The deployment failed.
     */
    error FailedDeployment();
}

{
  "remappings": [
    "@1inch/limit-order-protocol-contract/=lib/limit-order-protocol/",
    "@1inch/limit-order-settlement/=lib/limit-order-settlement/",
    "@1inch/solidity-utils/=lib/solidity-utils/",
    "solidity-utils/=lib/solidity-utils/",
    "limit-order-protocol/=lib/limit-order-protocol/",
    "limit-order-settlement/=lib/limit-order-settlement/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "murky/=lib/murky/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": true,
  "libraries": {}
}

[{"inputs":[{"internalType":"uint32","name":"rescueDelay","type":"uint32"},{"internalType":"contract IERC20","name":"accessToken","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"InvalidCaller","type":"error"},{"inputs":[],"name":"InvalidImmutables","type":"error"},{"inputs":[],"name":"InvalidSecret","type":"error"},{"inputs":[],"name":"InvalidTime","type":"error"},{"inputs":[],"name":"NativeTokenSendingFailure","type":"error"},{"inputs":[],"name":"SafeTransferFailed","type":"error"},{"anonymous":false,"inputs":[],"name":"EscrowCancelled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"secret","type":"bytes32"}],"name":"EscrowWithdrawal","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"FundsRescued","type":"event"},{"inputs":[],"name":"FACTORY","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PROXY_BYTECODE_HASH","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RESCUE_DELAY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"orderHash","type":"bytes32"},{"internalType":"bytes32","name":"hashlock","type":"bytes32"},{"internalType":"Address","name":"maker","type":"uint256"},{"internalType":"Address","name":"taker","type":"uint256"},{"internalType":"Address","name":"token","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"safetyDeposit","type":"uint256"},{"internalType":"Timelocks","name":"timelocks","type":"uint256"}],"internalType":"struct IBaseEscrow.Immutables","name":"immutables","type":"tuple"}],"name":"cancel","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"secret","type":"bytes32"},{"components":[{"internalType":"bytes32","name":"orderHash","type":"bytes32"},{"internalType":"bytes32","name":"hashlock","type":"bytes32"},{"internalType":"Address","name":"maker","type":"uint256"},{"internalType":"Address","name":"taker","type":"uint256"},{"internalType":"Address","name":"token","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"safetyDeposit","type":"uint256"},{"internalType":"Timelocks","name":"timelocks","type":"uint256"}],"internalType":"struct IBaseEscrow.Immutables","name":"immutables","type":"tuple"}],"name":"publicWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"components":[{"internalType":"bytes32","name":"orderHash","type":"bytes32"},{"internalType":"bytes32","name":"hashlock","type":"bytes32"},{"internalType":"Address","name":"maker","type":"uint256"},{"internalType":"Address","name":"taker","type":"uint256"},{"internalType":"Address","name":"token","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"safetyDeposit","type":"uint256"},{"internalType":"Timelocks","name":"timelocks","type":"uint256"}],"internalType":"struct IBaseEscrow.Immutables","name":"immutables","type":"tuple"}],"name":"rescueFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"secret","type":"bytes32"},{"components":[{"internalType":"bytes32","name":"orderHash","type":"bytes32"},{"internalType":"bytes32","name":"hashlock","type":"bytes32"},{"internalType":"Address","name":"maker","type":"uint256"},{"internalType":"Address","name":"taker","type":"uint256"},{"internalType":"Address","name":"token","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"safetyDeposit","type":"uint256"},{"internalType":"Timelocks","name":"timelocks","type":"uint256"}],"internalType":"struct IBaseEscrow.Immutables","name":"immutables","type":"tuple"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]